该页无缩略图
GAS/FUEL FIRED ORGANIC HEAT TRANSFER MATERIAL HEATERS 燃气有机热载体锅炉 +25℃🔆+300℃
•No oil collection plate, no dead angle of the flow of heat medium oil, but also to prevent the oil collection plate high pressure to produce the risk of oil leakage breakage.
•Front and rear doors can be opened quickly to provide quick inspection and maintenance.
With a fire view window, you can clearly monitor the combustion condition. With explosion-proof ports, to prevent the furnace ignition and deflagration in time to relieve the pressure, other boilers generally do not have this device
•Three-layer boiler shell insulation, the inner ceramic fibre, the middle rock wool boards, the outer lightweight cement, in order to reduce the loss of accumulation and improve the strength of the outer shell
•Three-circuit tube coil design, heat transfer area than the general thermal media boiler on the market of about 30%, in order to reduce the exhaust gas temperature and greatly improve the efficiency of the boiler.
•Large combustion chamber, to avoid flame contact with the tube wall and damage, and reduce NOx emissions.
| ITEM | UNIT | YY(Q)W-1800Y、Q | YY(Q)W-2400Y、Q | YY(Q)W-3000Y、Q | YY(Q)W-3500Y、Q | Y(Q)W-4000Y、Q | YY(Q)W-4600Y、Q | YY(Q)W-6000Y、Q | Y(Q)W-7000Y、Q | YY(Q)W-8200Y、Q | YY(Q)W-9300Y、Q | YY(Q)W-12000Y、Q | YY(Q)W-14000Y、Q |
| Rated Thermal | kcal/h | 150*104 | 200*104 | 250*104 | 300*104 | 350*104 | 400*104 | 500*104 | 600*10 4 | 700*104 | 800*104 | 1000*104 | 1200*10⁴ |
| Power | KW | 1800 | 2400 | 3000 | 3500 | 4000 | 4600 | 6000 | 7000 | 8200 | 9300 | 12000 | 14000 |
| Thermal Efficency | % | 92/94/96 | |||||||||||
| Design Pressure | MPa | 0.8/1.0/1.2 | |||||||||||
| Design Temperature | ℃ | 300/350/380 | |||||||||||
| Oil Capacity InsideFurnace | m³ | 1.7 | 2.0 | 2.54 | 2.9 | 3.6 | 4.1 | 4.9 | 5.6 | 8 | 9 | 11.2 | 12.3 |
| Pump Power | KW | 30 | 37 | 45 | 55 | 55 | 75 | 90 | 130 | 75*2 | 75*2 | 90*2 | 90*2 |
| Pump flow | m³/h | 132 | 176 | 220 | 256 | 293 | 337 | 418 | 406 | 250*2 | 300*2 | 400*2 | 450*2 |
| Pump head | m | 56 | 55 | 55 | 55 | 52 | 60 | 56 | 56 | 56 | 56 | 53 | 53 |
| Connecting Pipe Size | mm | 125 | 150 | 150 | 200 | 200 | 200 | 250 | 250 | 300 | 300 | 300 | 350 |
| Max. powerconsumption | KW | 40 | 50 | 62 | 72 | 72 | 95 | 115 | 170 | 195 | 200 | 235 | 250 |
| Gas Consumption | m³/h | 190 | 253 | 316 | 379 | 442 | 506 | 632 | 758 | 885 | 1011 | 1264 | 1517 |
| Oil Consumption | kg/h | 160 | 213 | 266 | 320 | 373 | 426 | 533 | 639 | 746 | 853 | 1066 | 1279 |
STEAM BOILER OF NWNS TYPE NWNS型蒸汽锅炉+25℃+300℃
High boiler efficiency: flue tube type large diameter furnace chamber design, equipped with high efficiency energy saver and condenser, the efficiency can reach more than 100%.
•Low heat dissipation loss: three-layer boiler shell insulation, inner layer of ceramic fibre, intermediate rock wool boards, outer lightweight cement, to reduce heat dissipation loss and improve the strength of the outer shell.
Superior Durability: Wetback back wall WET-BACK construction with ample heat transfer area for rugged durability.
•Short start-up time: from automatic ignition to the generation of steam at a pressure of 8 kg/cm² in about 10 minutes.
• Complete safety control: the use of highly reliable triple water level and triple pressure safety controls ensures the safe operation of the system.
| ITEM | UNIT | NWNS1 | NWNS2 | NWNS3 | NWNS4 | NWNS5 | NWNS6 | NWNS8 | NWNS10 | NWNS12 | NWNS15 | NWNS20 |
| Rated evaporation capacity | kg/hr | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 | 8000 | 10000 | 12000 | 15000 | 20000 |
| Rated vapour pressure | MPa | 1.0、1.25、1.6、2.0、2.5 | ||||||||||
| Combustion method | Electronic proportional control ELECTRONICCAM | |||||||||||
| Full capacity | kg | 4600 | 7100 | 8600 | 12000 | 12900 | 15400 | 17000 | 19600 | 23400 | 32500 | 39300 |
| Water retention | kg | 3600 | 5700 | 9300 | 9700 | 10300 | 11400 | 14200 | 16300 | 19700 | 27900 | 34200 |
| Approximate boiler weight | kg | 5900 | 8300 | 10500 | 13400 | 15600 | 18000 | 20300 | 23500 | 28500 | 37800 | 43300 |
| Thermal efficiency | % | 98% | ||||||||||
| Fuel Consumption | ||||||||||||
| Diesel oil | kg/h | 65 | 128 | 190 | 252 | 315 | 375 | 499 | 627 | 749 | 932 | 1243 |
| Petroleum | Nm³/h | 77 | 154 | 227 | 301 | 375 | 448 | 597 | 747 | 895 | 1112 | 1473 |
| Connection port diameter | ||||||||||||
| Diesel fuel port | mm | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 25 | 25 | 25 | 25 |
| Natural gas port | mm | 40 | 50 | 50 | 50 | 50 | 65 | 65 | 80 | 80 | 100 | 100 |
| Main Steam Port | mm | 50 | 80 | 80 | 100 | 125 | 125 | 150 | 150 | 200 | 200 | 200 |
| Water outlet | mm | 25 | 32 | 32 | 40 | 40 | 40 | 40 | 50 | 50 | 65 | 65 |
| Sewer outfall | mm | 40 | 50 | 50 | 50 | 50 | 50*2 | 50*2 | 50*2 | 50*2 | 50*2 | 50*2 |
| Safety valve port | mm | 40 | 50 | 65 | 50*2 | 50+65 | 65*2 | 65+80 | 80*2 | 80*2 | 100+80 | 100*2 |
| Chimney diameter | mm | 300 | 400 | 450 | 500 | 550 | 600 | 700 | 800 | 850 | 900 | 950 |
PUMP SERIES泵浦系列
High and low temperature pump series products mainly include: vortex magnetic pumps, light centrifugal magnetic pumps, chemical centrifugal magnetic pumps, fluorine lined magnetic pumps, precision vortex pumps, high flow centrifugal pumps, small high pressure vane pumps, stainless steel multi-stage pumps, vertical pipeline pumps and so on.
MAIN FEATURES
■ Temperature range -196 °C to +400℃
■ No shaft seal, magnetic drive design
■ Use corrosion-resistant flow parts
■ Meet the high and low temperature medium transportation, safe without leakage
■ Simple structure, stable operation, low vibration, low noise Easy installation and maintenance
AMC CHEMICAL STANDARD CENTRIFUGAL PUMPAMC 化工标准离心泵 -120℃ +400℃
Technical parameters
Product Features
Flow
2.1\~69.8m³/h
Head
50\~120M
• Advanced silica sol casting process
Power
• Advanced magnetic circuit design
0.37\~22KW
Material SUS316
• Efficient heat dissipation technology
• Rigid integrated base
Temp -196℃\~+400℃
• Wide applicable temperature range
MDH STAINLESS STEEL VORTEX MAGNETIC PUMPMDH 不锈钢旋涡磁力泵 -120℃ +350℃
Technical parameters
Product Features
Flow
2.1\~69.8m³/h
• The impeller is treated with a
Head
50\~120M
• high-maintenance-resistant surface
Power
0.37\~22KW
• treatment process.
Material Stainless steel
Temp
-120°℃\~+350°℃
• The gas-liquid mixed transportation technology.
• The stable bearing system technology.
• The ultra-high temperature magnetic circuit drive technology.
LMZ LIGHTWEIGHT CENTRIFUGAL MAGNETIC PUMP LMZ 轻型离心磁力泵 -120℃ +350℃
Technical parameters
Flow
4\~35m³/h
Head
15\~40M
Power
0.75\~11KW
Material
Stainless steel
Temp
-120°℃\~+350°℃
Product Features
• Advanced silica sol casting technology
• High-temperature and low-temperature resistant magnetic circuit design
• Enclosed support, internal anti-frosting
• Single support lightweight installation method
• Wide applicable temperature range
MDW STAINLESS STEEL VORTEX MAGNETIC PUMPMDW 不锈钢旋涡磁力泵-120℃+400℃
Technical parameters
Flow 15\~106m³/h
Head 15\~220M
Power0.18\~5.5KW
Material Stainless steel
Temp -120°℃\~+400℃
Product Features
• The impeller is treated with a high-maintenance surface treatment process.
• It can be transported in both forward and reverse directions.
• High-pressure resistance technology.
• High-strength and wear-resistant technology for the isolation sleeve.
MDC-X LARGE-SCALE HIGH-PRESSURE MAGNETIC GEAR PUMP MDC-X中大型高压磁力齿轮泵 -40C+400℃
Technical parameters
Maximum viscosity 100000cps
Flow 0.01-100m³
Maximum 50bar
Material Stainless steel
Temp -40°℃\~+400℃
Product Features
• The noise is reduced by 5 to 13 decibels.
• The pulsation is decreased by 70%.
• The volumetric efficiency is increased by 5 to 8%.
• The application range is wide.
• The measurement accuracy can reach 1%o under stable working conditions.
WD BRASS/STEEL VORTEX PUMPWD 黄铜/不锈钢旋涡泵 +5℃+160℃
Technical parameters
Flow 25\~106m³/h
Head 40\~220M
Power 0.55\~4KW
Material Copper、Stainless steel
Temp +5°℃\~+160℃
Product Features
• High head
• Diverse material options for the pump body
• Sealing material at the inlet
• Connection methods for the inlet and outlet can be selected as flanges or pipe threads
ENERGY STORAGE SERIES储能系列
Effective heat storage temperature range: 350 - 1000°C Utilizing off-peak electricity for heat storage, releasing heat during peak and off-peak periods to meet the customer's heat demand below 350°C while achieving peak shaving and valley filling, thereby reducing costs and increasing efficiency for the customer.
Combined with distributed photovoltaic power, converting photovoltaic electricity into thermal energy for storage, minimizing or even eliminating the peak-time heat cost for the enterprise.
■ It can output various media such as heat transfer oil, hot air, low-pressure steam, and hot water according to customer requirements.
■ Class E explosion-proof, physical reaction, safe and environmentally friendly.
■ Smooth and stable heat output, precise temperature control.
■Ultra-high heat storage density.
■ High energy efficiency ratio, low operating cost.
■Fully automatic intelligent, multi-dimensional safety warning control.
■Service life over 20 years.
■Easy installation, simple operation.
■Easy for distributed layout.
THERMAL ENERGY STORAGETEMPERATURE CONTROL EQUIPMENT热储能温控设备 +25℃+350℃
| Model | Size(mm) | Maximum storage capacity | Design power | Output power | Weight |
| ADTS - D380 - SH45 | 13716×2438×2896 | 9348kwh | 1280kw | 1160kw | 85t |
| ADTS - D380 - LH45 | 13716×2438×2896 | 11020kwh | 1510kw | 1370kw | 85t |
| ADTS - D380 - SH2 | 13100×2438×2896 | 8856kwh | 1210kw | 1100kw | 81t |
| ADTS - D380 - LH2 | 13100×2438× 2896 | 10440kwh | 1430kw | 1300kw | 81t |
| ADTS - D380 - SH3 | 12484×2438×2896 | 8364kwh | 1150kw | 1040kw | 76t |
| ADTS - D380 - LH3 | 12484×2438×2896 | 9860kwh | 1350kw | 1230kw | 76t |
| ADTS - D380 - SH4 | 11868×2438× 2896 | 7872kwh | 1080kw | 980kw | 72t |
| ADTS - D380 - LH4 | 11868×2438×2896 | 9280kwh | 1270kw | 1160kw | 72t |
| ADTS - D380 - SH5 | 11252×2438×2896 | 7380kwh | 1010kw | 920kw | 68t |
| ADTS - D380 - LH5 | 11252×2438×2896 | 8700kwh | 1190kw | 1080kw | 68t |
| ADTS - D380 - SH6 | 10636×2438×2896 | 6888kwh | 940kw | 860kw | 64t |
| ADTS - D380 - LH6 | 10636×2438×2896 | 8120kwh | 1110kw | 1010kw | 64t |
| ADTS - D380 - SH7 | 10020×2438×2896 | 6396kwh | 880kw | 800kw | 59t |
| ADTS - D380 - LH7 | 10020×2438×2896 | 7540kwh | 1030kw | 940kw | 59t |
| ADTS - D380 - SH8 | 9404×2438×2896 | 5904wh | 810kw | 730kw | 55t |
| ADTS - D380 - LH8 | 9404×2438×2896 | 6960kwh | 950kw | 870kw | 55t |
| ADTS - Z380 - SH9 | 8788×2438×2896 | 5412kwh | 740kw | 670kw | 51t |
| ADTS - D380 - LH9 | 8788×2438×2896 | 6380kwh | 870kw | 790kw | 51t |
| ADTS - Z380 - SH10 | 8082×2438×2896 | 4920kwh | 670kw | 610kw | 46t |
| ADTS - D380 - LH10 | 8082×2438×2896 | 5800kwh | 790kw | 720kw | 46t |
| ADTS- Z380 - SH11 | 7466×2438×2896 | 4428kwh | 600kw | 550kw | 42t |
| ADTS - D380 - LH11 | 7466×2438×2896 | 5220kwh | 710kw | 650kw | 42t |
| ADTS- Z380 - SH12 | 6850×2438×2896 | 3936kwh | 540kw | 490kw | 38t |
| ADTS - D380 - LH12 | 6850×2438×2896 | 4640kwh | 630kw | 580kw | 38t |
| ADTS - X380 - SH13 | 6234×2438×2896 | 3444kwh | 470kw | 430kw | 33t |
| ADTS - D380 - LH13 | 6234×2438×2896 | 4060kwh | 550kw | 500kw | 33t |
| ADTS - X380 - SH14 | 5618×2438×2896 | 2952kwh | 400kw | 370kw | 29t |
| ADTS- D380 - LH14 | 5618×2438×2896 | 3480kwh | 470kw | 430kw | 29t |
| ADTS- X380 - SH15 | 5002×2438×2896 | 2460kwh | 330kw | 300kw | 25t |
| ADTS - D380 - LH15 | 5002×2438×2896 | 2900kwh | 390kw | 360kw | 25t |
| ADTS - X380 - SH16 | 4386×2438×2896 | 1968kwh | 270kw | 240kw | 21t |
| ADTS- D380 - LH16 | 4386×2438×2896 | 2320kwh | 320kw | 290kw | 21t |
| ADTS- X380 - SH17 | 3770×2438×2896 | 1476kwh | 200kw | 180kw | 16t |
| ADTS - D380 - LH17 | 3770×2438×2896 | 1740kwh | 240kw | 210kw | 16t |
| ADTS - X380 - SH18 | 3154×2438×2896 | 984kwh | 130kw | 120kw | 12t |
| ADTS - D380 - LH18 | 3154×2438×2896 | 1160kwh | 160kw | 140kw | 12t |
| ADTS - X380 - SH19 | 2530×2438×2896 | 500kwh | 65kw | 60kw | 7.6t |
| ADTS - D380 - LH19 | 2530×2438×2896 | 600kwh | 80kw | 75kw | 7.6t |
HEAT EXCHANGER SERIES换热器系列
The heat exchanger series mainly includes: evaporators, condensers, oil separators, gas-liquid separators, oil coolers, high-efficiency separators, regenerative heaters, preheaters, liquid storage tanks, and other customized shell-and-tube heat exchangers.
Main purpose
The application fields include industrial cooling, high-temperature heat pumps, waste heat recovery, petrochemicals, chemical industry, power industry, aerospace, CCL,data centers, food and beverage, pharmaceutical industry, ship and marine engineering, papermaking, etc.
DRY-TYPE TWO HX FOR REFRIGERATION/HEAT PUMP SCREW制冷、热泵螺杆用干式两器
APPLICATION AREAS
Full liquid and falling film evaporators can be widely applied to various oil-containing and oil-free compressors, as well as to high and low temperature conditions, providing higher energy efficiency and lower operating costs compared to dry-type systems. They are suitable for various applications that require heating or cooling, such as central air conditioning and process cooling water.
MATERIAL SELECTION
| Shell section | Carbon steel, stainless steel, carbon steel lined with ePTFE, etc. |
| Optional material for the tube section | Copper, nickel copper, naval copper, stainless steel, titanium materials, etc. |
| Optional tube diameter | Φ7.94、Φ9.52、Φ12.7、Φ16、Φ19、Φ25 |
| Tube wall thickness | 0.5mm~2mm |
| Cooling medium | Water, ethylene glycol solution, calcium chloride solution or other types of solutions, etc. |
CHEMICAL INDUSTRY CONDENSERS AND COOLERS化工用冷凝器、冷却器
APPLICATION AREAS
The product is resistant to high pressure, high temperature, low temperature and strong corrosion, and can meet the requirements of large temperature differences and multi-media heat exchange. It is mainly applicable to industries such as chemical engineering, petrochemicals, power and energy, for example, temperature control of reaction vessels, material cooling/heating, waste heat recovery, cooling of lubrication systems, compressor matching, and turbine matching, etc.
MATERIAL SELECTION
| Shell section | Carbon steel, stainless steel, titanium materials, etc. |
| Optional material for the tube section | Copper, nickel copper, naval copper, stainless steel, titanium materials, etc. |
| Optional tube diameter | Φ16、Φ19、Φ25、Φ32 |
| Tube wall thickness | 1.0mm~3.0mm |
| Cooling medium | Water, ethylene glycol solution, calcium chloride solution or other types of solutions, etc. |
HEATER SERIES加热器系列
Our electric flange heaters are used under demanding conditions to heat liquids and gases for industrial processes. With our high-quality ADCD® tubular (∅8.5 to 16 mm) or cartridge heaters (∅up to 52 mm) and a customised surface load for every process, we offer long service life and high efficiency. We only use high alloy stainless steels.
Advantages
Achieve high power density
Precise temperature monitoring
■ Safe and reliable operation
Compatible with the largest DN 1000 flange, equipped with ADCD® tubular or sleeve-type heating elements
FLANGE HEATER法兰加热器 +25℃+350℃
Working voltage: 690/400/380V 50Hz 3-phase
Design pressure: 16 bar, working pressure: 10 bar 5
•Design temperature: 350°C, working temperature: 320°C
•Heating medium: Conductive oil or water
Insulation resistance ≥100 MQ, no breakdown under voltage of 2000V for 1 minute
Flange cover material: Stainless steel 304, carbon steel with nickel plating
| Power | Immersion length L | Cold end length L1 | Number of tubes | Single tube power | Surface load |
| 60KW | 1000mm | 100mm | 18支 | 3333W | 5.9W/cm2 |
| 48KW | 1000mm | 100mm | 18支 | 2667W | 4.7W/cm2 |
| 45KW | 1000mm | 100mm | 15支 | 3000W | 5.3W/cm2 |
| 36KW | 800mm | 100mm | 12支 | 3000W | 6.8W/cm2 |
| 30KW | 800mm | 100mm | 12支 | 2500W | 5.7W/cm2 |
| 24KW | 600mm | 50mm | 12支 | 2000W | 5.3W/cm2 |
| 20KW | 500mm | 50mm | 12支 | 1667W | 5.3W/cm2 |
| 18KW | 600mm | 50mm | 9支 | 2000W | 5.8W/cm2 |
| 15KW | 550mm | 50mm | 6支 | 2500W | 7.9W/cm2 |
| 12KW | 420mm | 50mm | 6支 | 2000W | 8.6W/cm2 |
INTERNET OF THINGS CLOUD PLATFORM奥德物联网云平台
Alarm Information Delivery
When the control system generates an alarm, it will prompt the alarm information in PC IOT platform, mobile APP, and WeChat app; if a faulty shutdown alarm occurs, the user can receive the alarm information through mobile phone SMS.
Online monitoring
Equipment operation overview, including equipment function introduction, normal temperature, control mode, operation status, real-time data, operation time and actual energy consumption, etc.
Data real-time curve, historical curve and other data curve monitoring.
APP operation remote switching.
Component Maintenance Reminder
The control system records the operating time and number of actions of key components in real time, and triggers a maintenance reminder based on the maintenance time and service life of the components.
The control system will record the data that the user cares about in real time and save it in the system database for the user to view and analyse.
售前 PRE-SALE
Technical research, clear customer needs
• Free to provide set selection programme
Site visit to define parameters and details
售中 SALE
Real-time progress enquiry for order production
Worldwide, special vehicle delivery
Waterproof and anti-collision packaging to avoid cargo damage
售后 AFTER SALES
24H Provide fast after-sales service
Regular return visit, tracking service
•Door-to-door inspection, maintenance, training
APPLICATIONS应用领域
TO ACHIEVE INDUSTRY-WIDE COVERAGE IN THE INDUSTRIAL SECTOR AND IMPORT SUBSTITUTION OF HIGH-END PRODUCTS.
5G materials, 3C communications, energy storage, integrated die-casting, circuit boards, semiconductors, military, new energy, aerospace, scientific research, rail transportation, automotive parts, chemicals, pharmaceuticals, precision injection moulding, rubber, sheet/sheet/film, food, printing and dyeing, packaging, drying, composite materials, carbon fibre products and so on.
COMPONENT选用配件
Germany BITZER, Germany BOCK, Taiwan HANZHONG, the United States of America Copeland, Denmark Danfoss, Japan Panasonic compressor; Denmark Grundfos pump, Germany specK pump; Alfa Laval heat exchanger
High-efficiency condenser, evaporator; Danish Danfoss, Italy Carle throttle device; Danish Danfoss pressure transmitter;
Japan ARK air filter; Italy OR solenoid valve; Germany RTK proportional valve and so on.
Germany Siemens controller, human-machine interface, contactor, thermal relay, Japan Omron phase sequence protection and other well-known brands of electronic components
模温机安装管路流程图
MOLD TEMPERATURECONTROL UNIT PIPELINE INSTALLATION DRAWING
模温机、冷水机组合外部管路连接图
MOLD TEMPERATURE CONTROL UNIT AND CHILLER'S PIPELINE CONNECTION DIAGRAM
燃气(油)有机热载体炉外部连接管路
GAS /FUEL FIRED ORGANIC HEAT TRANSFER MATERIAL HEATER PIPELINE DRAWING
风冷螺杆冷水机组外部管路连接参考图
AIR COOLED SCREW CHILLER PIPE CONNECTION DIAGRAM
水冷冷水(油)机组外部管路连接参考图
WATER COOLED CHILLER PIPE CONNECTION DIAGRAM
水冷螺杆冷水机组外部管路连接参考图
WATER COOLED SCREW CHILLER PIPE CONNECTION DIAGRAM
SUCCESSFUL CASES成功案例
CHOOSE AODE
In China, Aode's professionalism makes the national brand replace the imported brand.
Overseas, Aode's quality makes us the pride of Made in China. Temperature control we guarantee for you.
For more cases,please visit the website : www.aode-global.com
Automotive integrated die-casting
Testing Industry
Rubber industry
Die-casting industry
Organic heat carrier furnace (chemical fibre)
Moulding temperature control
Wind power industry
chemical medicine
petrochemicals
5G circuit boards
Temperature control for calendering lines
Injection moulding industry
PARTNERS
合作伙伴。
12,000 + Success Stories
球范围内连续稳定运转
There are more than 80,000 units of AODE equipment in continuous and stable operation around the world.
MINGYANG GROUP明阳集团
敏實集團
TUOPU拓普
Fast
宁波臻至
DFV
YIZUMI伊之密
北京科华微电子材料有限公司Kempur Microelectronics Inc
片板膜行业
大学及科研院校
中国工程物理研究院
北京理工大学
官方网址：www.aode-global.com
Suzhou AODE Precise Equipment Co., Ltd. ( Headquarter & Plant 1) 苏州奥德高端装备股份有限公司(总部一厂区)
地址：苏州昆山市高新区城北五联路228号
Add: NO.228 Wulian road, Chengbei, High-tech Zone, Kunshan City, Jiangsu Province, China.
电话/Tel：+86-512-57885715 +86-15862665530
邮箱/E-mail：mkt@aodejx.com
海外业务电话/Overseas Business Contact: +86-18020208608
Refrigeration Business Division (Plant 3) 制冷事业部(二厂区)
地址：江苏省昆山市玉山镇勤昆路66号8号房 Add: Room 8, 66 Qinkun Road, Yushan Town, Kunshan City, Jiangsu Province, China.
地址：江苏省昆山市玉山镇玉杨路366号
Add: No.366 Yuyang Road,Yushan Town,Kunshan City,JiangsuProvince, China.
Shanghai Aode Pilot Technology Co.,Ltd.(Shanghai R&D Center)上海奥德领航科技有限公司(上海研发中心)
地址：上海市闵行区马桥镇景谷路410号 Add: No. 410, Jinggu Road, Maqiao Town, Minhang District, Shanghai, China.
AODE Machinery (Shenzhen) Co., Ltd.深圳市奥德机械有限公司
地址：深圳市宝安区松岗镇东方大道田洋三路9号 Add: NO.9, Tianyang Three Road, Dongfang Avenue,Songgang Town, Baoan District, Shenzhen city,Guangdong Province, China.
AULANK Pumps Manufacturing Co.,Ltd.昆山奥兰克泵业制造有限公司
地址：江苏省昆山市巴城镇东荣路151号1号厂房 ADD: Plant 1 No.151 Dongrong Road, Bacheng Town, Kunshan City, Jiangsu Province, China.
TIKTOK
