Aluminium Door & Window Hardware
Aluminium Door & Window Hardware Typical Product Catalogue
Features and Maintenance of KIN LONG Door & Window Hardware
Design Requirement of Matching Groove Between Door& Window Profile And Hardware
I、Aluminium Window Hardware Series
1、Open in & Turn & Tilt Window Hardware Series
1-1、NPD100 Series Turn-and-Tilt Window with Multi-point Lock On 2 Sides(Industry Recommendatory Series)......6
1-2、NPD100T Series Turn-and-Tilt Window with Multi-point Lock On 2 Sides(Anti-prying ) ...............................10
1-3、NPD200 Series Turn-and-Tilt Window with Multi-point Lock On 4 Sides......................................................12
1-4、NPD300 Series Concealed Turn-and-Tilt Window with Multi-point Lock On Multi Sides ..............................16
1-5、NPD400 Series Concealed Multi-Point Lock Open in Top Hung Window (180° open).................................20
1-6、NPD500 Series Turn-and-Tilt Window with Multi-point Lock On 2 Sides......................................................24
1-7、SPD100 Series Tilt-and-Turn Window with Multi-point Lock On Multi Sides.................................................28
1-8、SPD300 Series Concealed Tilt-and-Turn Window with Multi-point Lock On Multi Sides ..............................32
2、Open-in Side-Hung Series
2-1、NP100 Series Open-in Side-hung Window with Two-point Lock On Single Side .........................................36
2-2、NP100T Series Open-in Side-hung with Two-point Lock On Single Side(Anti-prying)..................................38
2-3、NP110 Series Open-in Side-hung Window with Two-point Lock On Single Side..........................................40
2-4、NP300 Series Concealed Open-in Side-Hung Window with Two-point Lock On Single Side.......................42
2-5、NP400 Series Concealed Open-in Side-Hung Window with Two-point Lock On Single Side (180°open) ...44
2-6、DK100 Series Double-leaf Window with C-groove and False Mullion ..........................................................46
2-7、ND100 Series Hopper Window with C-groove ..............................................................................................48
3、Open-out Side-Hung Series
3-1、WK100 Series Open-out Side-hung Window with C-Groove........................................................................52
3-2、WK500 Series Open-out Side-hung Window without Groove.......................................................................54
3-3、WK700 Series Open-out Side-hung Window with C-Groove In Single Side.................................................56
3-4、WK900 Series Open-out Side-hung Window without Groove.......................................................................58
4、Screen Integrated Hardware Series
4-1、SWK100 Series Fork-type Open Out Screen Window Integrated Hardware................................................62
4-2、SWK200 Series Square Shaft Type Open Out Screen Window Integrated Hardware 64
4-3、SWK300 Series Square Shaft Type K-groove Open Out Screen Window Integrated Hardware..................66
5、Fire Resistant / Fireproof Window Hardware Series
5-1、NHNPD100 Series Turn&tilt Fire resistant Window Hardware System.........................................................68
5-2、NHNP100 Series Open-in Side Hung Fire Resistant Window Hardware System.........................................70
5-3、FHNP200 Series Open-in Side Hung Fireproof Window Hardware System(Temperature control automatic closing window type)...72
5-4、NHWK100 Series Open-out Side Hung Fire Resistant Window with C Groove Hardware System..............74
5-5、FHWK300 Series Open-out Side Hung Fireproof Window Hardware System(Temperature control automatic closing window type) 76
6、Middle-hung Window Hardware Series
6-1、ZX100 Series Middle-hung Window..............................................................................................................84
7、Curtain Wall Window Hardware Series
7-1、MQ100 Series Curtain Wall Top-hung Window.............................................................................................86
7-2、MQ200 Series Curtain Wall Top-hung Window.............................................................................................88
7-3、MQ300 Series Curtain Wall Top-hung Window.............................................................................................90
7-4、MQ400 Series Curtain Wall Parallel Opening Window92
8、Sliding & Folding Hardware Series
8-1、FTL200 Series Sliding & Folding Door96
8-2、FTL300 Series Sliding & Folding Door..........................................................................................................98
Content
9、Lifting & Sliding Hardwre Series
9-1、TTL200 Series Lifting & Sliding Door .........................................................................................................102
9-2、TTL300 Series Lifting & Sliding Door .........................................................................................................104
10、Product List
10-1、Window Handle Series .............................................................................................................................108
10-2、Window Handle Accessory Series............................................................................................................128
10-3、Window Hinge Series ...............................................................................................................................129
10-4、Transmitter Series ....................................................................................................................................137
10-5、Transmission Rod Series..........................................................................................................................140
10-6、Locking Point and Locking Plate Series ...................................................................................................145
10-7、Active locking point series ........................................................................................................................150
10-8、Middle Lock Plate Series ..........................................................................................................................151
10-9、Safety Lock Latch Series..........................................................................................................................152
10-10、Limiter Series..........................................................................................................................................153
10-11、New Product Series ................................................................................................................................155
10-12、Hinge Selection Specifications ...............................................................................................................157
II、Sliding Window and Door Hardware Series
11、Sliding Hardware Series
11-1、TL Series Sliding Window .........................................................................................................................160
11-2、TLM100 Series Sliding Door.....................................................................................................................162
11-3、TLM110 Series Sliding Door .....................................................................................................................166
11-4、TLM120 Series Sliding Door.....................................................................................................................170
11-5、TLM200 Series Sliding Door.....................................................................................................................172
11-6、TLM300 Series Sliding Door.....................................................................................................................176
12、Side-Hung Door Hardware Series
12-1、PM100 Series Single-Sash Door with Ordinary Profile ............................................................................180
12-2、PM110 Series Single-Sash Door with Ordinary Profile.............................................................................182
12-3、PM200 Series Double-Sash Door with Ordinary Profile ...........................................................................184
12-4、PM300 Series Single-Sash Door with C-groove Profile ...........................................................................186
12-5、PM310 Series Single-Sash Door with C-groove Profile ...........................................................................190
12-6、PM320 Series Single-Sash Door with C-groove Profile ...........................................................................192
12-7、PM330 Series Single-Sash Door with C-groove Profile ...........................................................................196
12-8、PM400 Series Double-Sash Door with C-groove Profile ..........................................................................193
12-9、PM410 Series Double-Sash Door with C-groove Profile ..........................................................................202
12-10、PM500 Series Heat-insulation Bridge-cut-off Single Sash Door Without Groove ..................................206
12-11、PM600 Series Heat-insulation Bridge-cut-off Double Sash Door Without Groove .................................208
13、High Airtight Sliding Side Pressure Door Hardware Series
13-1、TWD100 Series High Airtight Sliding Side Pressure Doo.........................................................................210
14、Product List
14-1、Door Lock Series ......................................................................................................................................214
14-2、Cylinder Series .........................................................................................................................................234
14-3、Cover Plate Series236
14-4、Transmitter Series ....................................................................................................................................241
14-5、Door Handle Series ..................................................................................................................................242
14-6、Door Hinge Series 262
14-7、Locking Plate Series278
14-8、Door Latch Series .....................................................................................................................................280
4-9、Transmission Rod Series..........................................................................................................................284
14-10、Handle Series .........................................................................................................................................287
14-11、Sliding Handle Series..............................................................................................................................291
14-12、Sliding Lock Series .................................................................................................................................292
14-13、Locking Plate Series...............................................................................................................................307
14-14、Crescent Lock Series .............................................................................................................................313
14-15、Lock Hook Series ...................................................................................................................................317
14-16、Smart Door Lock for Profile Door ...........................................................................................................322
14-17、Part of Products Introduction ..................................................................................................................323
III、Roller Hardware Series
15-1、The Selection of Roller Hardware.............................................................................................................342
15-2、Roller Series .............................................................................................................................................343
Bearing capacity 25Kg-70kg roller............................................................................................................344
Bearing capacity 80Kg-140kg roller..........................................................................................................366
Bearing capacity 150Kg-200kg roller........................................................................................................387
Bearing capacity more than 200kg roller series .......................................................................................389
15-3、Hardcover Roller Series ...........................................................................................................................391
15-4、Sliding Door Roller Series ........................................................................................................................404
15-5、Lift & Sliding Roller Series ........................................................................................................................409
15-6、Screen wheel and other customized pulley series ...................................................................................412
15-7、Part of The Product Introduction...............................................................................................................416
IV、Friction Stay and Pegstay Series
16-1、Key Points for Selecting Kinlong Friction Stay and Pegstay ....................................................................430
16-2、Heavy-Duty Friction Stay for Parallel opening Windows(HC825GX series).............................................431
Solution for external turn & tilt windows for curtain walls..........................................................................432
Solution To Open-out Turn&Tilt Windows .................................................................................................434
Complete configuration plan for screen windows.....................................................................................435
Open-out Hinge Configuration Scheme....................................................................................................436
Solution for Hook-type Window ................................................................................................................437
Disengagement Preventor(FTQ15 series, FTQ25 series, FTQ26 series, FTQ50 series) ........................438
Friction Stay HC400G-60 series ...............................................................................................................440
Limiter series (XW15, XW20)...................................................................................................................441
Friction Stay HCC45 series.......................................................................................................................442
Friction Stay HCK40 series.......................................................................................................................443
Friction Stay HCK60 series.......................................................................................................................444
Open-out Hinge (WJL105 series) .............................................................................................................445
16-3、Side-hung Friction Stay Series .................................................................................................................446
16-4、Top-hung Friction Stay Series 471
16-5、Parallel Friction Stay Series .....................................................................................................................481
16-6、Pegstay Series .........................................................................................................................................485
V、Weatherstrip Series
PB: High-elasticity and High-density Series-basic Type504
SP: High Elastic & Siliconized Series-waterproof Basic Type .............................................................................505
FN: Siliconized Plus Film Series-waterproof Upgraded Type..............................................................................506
QF: Siliconized Plus Cloth Series-Sealed Mute Type507
GN: High Elasticity Plus Film Series-seal Upgraded Type 508
Configuration Drawing for Mohair........................................................................................................................509
1
III、Statement
1Features and Maintenance of KIN LONG Door & Window Hardware
1. Convenient operation by single point control
All function is achieved by changing the position of handle
2. Standardization and systematization
Speedy installation for production enterprises and construction companies
3. Adjustability
Multi-adjustable function,all hardware can be suitable for both left and right installation if no
special requirements
4. Best load bearing capacity
It can accommodate 130kg for a window sash and 300kg for a door sash in maximum
5. High security
Lock point is barbed on lock block of frame, and the top end of friction stay bracket arm is
perfectly integrated with the wrap angle, realizing locking function as well as enhancing the
security
6. Wide application
Meet various opening requirements from customers
7. Strong applicability
It can be used to profile with standard european C groove or without groove in current market
8. High quality specification
Products are made of high quality S.S304, zinc alloy and Aluminium alloy castings, with
galvanization or spray -paint surface finish. Some components a re made of high quality of
nylon PA66 and POM.
I、Features
1. Insure the best using state of products, please arrange main tenance termly. Products installed
at alpine region should be maintained before winter .
2. Maintenance cycle of product moving parts and friction parts is 6 months, if screw loose or abrasion,
please fasten, repair or replace it in time, so avoid to affect the normal use.
3. Accessories such as handles, hinges, friction stay , rollers, etc., which are related to opening and closing,
should be decontaminated or dedusted regularly and lubrication is required to keep cleaned and clog-free
if needed. It is forbidden to use corrosive chemicals to clean hardware, such as acetone, xylene, etc.
4. Windows and doors will have adverse phenomenon after the lon g-term use, such as edge failure, sagging,
big gap etc, these can be solved by adjusting hardware.
II、Instructions for products maintenance
★ The product needs to be ordered as a set. if it is ordered separately, the feasibility of the product must be confirmed
with the technical department to ensure the quality and performance of the product.
★ Product technical parameters, pictures in catalogue are just for reference only, and actual application please in kind
prevail.
★ With the innovation of product technology, the parameters, functions, appearance, assembly and packaging of some
products in the catalog may change without prior notice.
★ The bearing capacity of the hardware in the catalogue is related to the parameters of the door and window material, glass
thickness, height-to-width ratio, etc. when choosing an unconventional window type, please contact our technical staff.
★ The applicable window type parameters shown in the catalogue are based on the laboratory test environment and
historical application experience. Please perform trial installation and confirmation according to the actual application
conditions of the project. The parameters in this atlas are not for the basis for any litigation and compensation.
A B C D E F G H I J K L M N P
4.5 3 5 3 11.5 22 20 +0.3
-0.1 15 +0.3
-0.1 14 +0.3
-0.1 18 +0.3
-0.1 4 5 7.5 2 2
Design Requirement Matching Groove Between Door&Window
Profile With Hardware
1.Profile dimension requirement for open-in side-hung window and turn-and-tilt window
Note: All sizes are the status after surface treatment (like electrophoresis、spray coating etc.)
■ Standard 20C groove profile
2. Profile dimension requirement for open-out side-hung window and top-hung window
■ Standard 20C groove profile
■ Non-groove profile
■ Single side C groove profile
■ Dimension required for friction
stay installation
Frame Sash
Match line of the sash and frame
Frame Frame
Sash
Sash
Frame
Sash
Frame
Sash
2 / 3
Design Requirement Matching Groove Between Door&Window
Profile With Hardware
3. Profile dimension requirement for top-hung window
■ Non-groove profile ■ Single side C groove profile
Frame
Sash
Frame
Sash
4. Standard sliding window&door profile
5. Standard lift-sliding door profile
Frame
Sash
Frame
Sash
Frame
Sash
Frame
Sash
A B C D E F G H I J K L M N P Q
4.5 3 5 3 11.5 22 20 +0.3
-0.1 15 +0.3
-0.1 14 +0.3
-0.1 18 +0.3
-0.1 4 5 7.5 2 45 53
7. Transmission aluminium rod dimension requirement for european standard 20C groove
Type one:
Type two:
Design Requirement Matching Groove Between Door&Window
Profile With Hardware
6. Swing door hardware system and profile size matching requirements.
Note:All sizes are the status after surface treatment (like electrophoresis、spray coating etc.)
Frame
Sash
■ Standard 20C groove profile
4 / 5
I、Aluminium Window Series
01
02
03
04
07
08
09
10
15 14
18
17
16
05
06
12
13
11
11
1-1 NPD100 Series Turn-and-Tilt Window With Multi-Point Lock on 2 Sides
(Industry Recommendatory Series)
6 / 7
Number Product name Code Quantity Remark
01 Handle LCZS38 1 Optional
02 Loose preventer FSP10 1
03 Misuse preventer FWG10A 1 Include small locking plate
04 Locking plate ZA1-6A 1 ①
05 Corner device ZA1 1
06 Small connector rod LG11A 1 ②
07 Overturn supporter LN56 1
08 Preventer LN57 1
09 Supporting block LZCK05 1
10 Cushion block N33A 1
11 Waterproof cap FSG-01 2
12 Upper pivot hinge NDHA10B 1
Left & right ③ 13 Bottom pivot hinge NDHB10B 1
14 Safety device AQS10 1
15 Locking plate SK29 1
16 Misuse preventer FWG20A 1 ④
17 Main transmission rod N20 1
18 Limiter LPX17 1 The length depends on
window dimension
Configuration instruction:
① Recommended distance between lock points should be ≤ 400mm.
② Sash dimensions as follow:width 450-650mm, height 600-1800mm, when width is 320-450mm, item of number 6 can
be changed to LG12A. If you need to increase the inverting distance, you can replace the 6# accessories with LG13A,
and the corresponding small-size window type can be equipped with LG23A.(height and width refer to the distance
between the edge of window sash.)
③ Bearing capacity: ≤ 90Kg, in order to maintain the best use state, it is recommended that the width and height ratio of the
window to be kept at about 1:1.5.
④ The handle screw is FWG20-06, used with FWG20A.
★ The Items with green color are optional hardware.
★ Please refer to pages 19 of this booklet for the opening and installation instructions of the child safety lock.
★ It is recommended to use with the casement window limiter to achieve the best effect. For the optional installation
requirements of the limiter, please refer to the limiter series on pages 153~154 of this atlas.
★ For the installation and adjustment of the product, please refer to pages 8~9 of this catalogue.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile
section diagram. (open-in side hung window, turn-and-tilt window hardware system and profile size matching requirements)
Handle LCZS09 Handle CZS20 Handle LCZS39 Handle LCZS40 For more handles ....
Hardware Configuration for NPD100 Series
Optional handles for reference:
please refer to
pages 108~127 of
this catalogue.
1 Open in & turn & tilt window hardware series
L1=H/2-157.5
2-∅5.5
NPD100 Series Adjustment Illustration for Turn-and-Tilt Window With
Multi-point Lock on 2 Sides
Keep 3mm gap when
installing
Keep head of
screw flat with
surface after
fixing
Keep head of
screw flat with
surface after
fixing Before installation After installation
I, II, III Accessories Hexagon Screw Installation diagram
Keep head of
screw flat with
surface after
fixing
①、②
Adjustable linear
eccentricity is ±1.4
Adjustable linear
eccentricity is ±1.4
1 2 3
Illustration for Corner cutting of sash
Drilling drawing
for handle
LCZS38
Alu.transmission rod
drilling illustration
W (Width for
end to end of
sash groove)
Sash height can be
slightly adjusted by
adjusting the screw.
No need turn out
the screw for intitial
installation
Close state
Open state
Tilt state
H Height for top to ( top of sash groove)
Note: “ ”stands for specification for socket head wrench
8 / 9
NPD100 Series Installation Illustration for Turn-and-Tilt Window With
Multi-point Lock on 2 Sides
★ Installation sequence for hardware
in sequence of picture 1, 2, 3......
Features of FWG10A
◆ Combine function of
transmitting and
preventing
mis-operation;
◆ Simple structure but
strong practicality;
◆ High safety,
effectively avoiding
incidents caused by
mis-operation;
◆ Fast installation
Overturn
supporter LN56
Alu
transmission
rod L1
Alu
transmission
rod L2
Corner device ZA1
Misuse
preventer
FWG10A
Picture 2
Alu
transmission
rod L3
Small
connector
Rod LG11A
Picture 1
Feature of LG11A
◆ Static bottom-hung opening
limitation design
◆ The flexible opening feeling
of bottom-hung operation
◆ Locking point matches with
V-groove
◆ Improve sash dropping
occurrence
Cut off the
sealing rubber
strip at part
and before
installing pivot
hinge
1
2
Handle LCZS38
Misuse
preventer
FWG10A
Loose
preventer
FSP10
Picture 4
Features of N33A
◆ Correct and reset the sash
◆ Fast installation
Cushion block
N33A
Picture 3
Feature of NDHA10B
◆ Hinge axis is made of
stainless steel;
◆ High bearing capacity;
◆ High security;
◆ Fast installation;
◆ Interchangeable (left&right)
Upper hinge
NDHA10B
Picture 6
Feature of NDHB10B
◆ Hinge axis is made
of stainless steel;
◆ High bearing
capacity;
◆ High security;
◆ Adjustability
◆ Fast installation;
◆ Interchangeable
(left&right)
Bottom hinge
NDHB10B
Picture 5
1 Open in & turn & tilt window hardware series
01
02
03
04
04
07
08
09
10
15 14
16
05
06
12
13
11
11
1-2 NPD100T Series Turn-and-Tilt Window With Multi-Point Lock on 2 Sides
(Anti-prying)
10 / 11
Number Product name Code Quantity Remark
01 Handle LCZS38 1 Optional
02 Loose preventer FSP10 1
03 Misuse preventer FWG10A 1 Include small locking plate
04 Locking plate SK38 2 Left & right ①
05 Corner device ZA1T 1
06 Small connector rod LG11A 1 ②
07 Overturn supporter N50T 1
08 Disengagement preventer N31 1
09 Supporting block LZCK05 1
10 Cushion block N33A 1
11 Waterproof cap FSG-01 2
12 Upper pivot hinge NDHA10B 1
Left & right ③
13 Bottom pivot hinge NDHB10B 1
14 Safety device AQS10 1
15 Locking plate SK29 1
16 Limiter LPX17 1 The length depends on
window dimension
Handle LCZS09 Handle CZS20 Handle LCZS39 Handle LCZS40 For more handles ....
Hardware Configuration for NPD100T Series
Optional handles for reference:
please refer to
pages 108~127 of
this catalogue.
Configuration instruction:
① Recommended distance between lock points should be ≤ 400mm.
② Sash dimensions as follow:width 450-650mm, height 600-1800mm, when width is 320-450mm, item of number 6 can
be changed to LG12A. If you need to increase the inverting distance, you can replace the 6# accessories with LG13A,
and the corresponding small-size window type can be equipped with LG23A. (height and width refer to the distance
between the edge of window sash.)
③ Bearing capacity: ≤ 90Kg, in order to maintain the best use state, it is recommended that the width and height ratio of the
window to be kept at about 1:1.5.
★ The Items with green color are optional hardware.
★ Please refer to pages 19 of this booklet for the opening and installation instructions of the child safety lock.
★ It is recommended to use with the casement window limiter to achieve the best effect for the optional installation
requirements of the limiter, please refer to the limiter series on pages 153~154 of this atlas.
★ For the installation and adjustment of the product, please refer to pages 8~9 of this catalogue.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile
section diagram. (open-in side hung window, turn-and-tilt window hardware system and profile size matching requirements)
1 Open in & turn & tilt window hardware series
01
02
03
04
04
04
04
04
06
17
05
08
07
09
08
10
13 14
14
11
11
16
15
12
1-3 NPD200 Series Turn-and-Tilt Window With Multi-point Lock On 4 Sides
12 / 13
Number Product name Code Quantity Remark
01 Handle LCZS38 1 Optional
02 Loose preventer FSP10 1
03 Misuse preventer FWG10A 1 Include small locking plate
04 Locking plate ZA1-6A 5 ①
05 Corner device ZA2 1
06 Middle transmission rod N36A 1
07 Top connector rod N8C 1 ②
08 Corner device LZB5 2
09 Overturn supporter LN56 1
10 Disengagement preventer LN57 1
11 Side transmission rod N37A 2
12 Middle transmission rod LCDG41 1
13 Supporting block LZCK05 1
14 Waterproof cap FSG-01 2
15 Upper pivot hinge NDHA10B 1
Left & right ③
16 Bottom pivot hinge NDHB10B 1
17 Secondary connector rod PDX-A 1 ④
Handle LCZS09 Handle CZS20 Handle LCZS39 Handle LCZS40 For more handles ....
Hardware Configuration for NPD200 Series
Optional handles for reference:
please refer to
pages 108~127 of
this catalogue.
Configuration instruction:
① Recommended distance between lock points should be ≤400mm.
② Sash dimensions as follow:width 650-1000mm, height 600-2000mm.(Height and width are distances between edges of
window profile)
③ Basic load bearing capacity is 90KG, suggested proportion of the height to width within is 1.5:1.
④ The fittings of the super large windows with the width of 1000-1600mm,
the second connecting rod can be added on the basis of the standard configuration to lengthen the auxiliary
transmission aluminium rod and the movable locking point can be added on the aluminium rod to meet the
locking requirements.
★ The Items with green color are optional hardware.
★ For the installation and adjustment of the product, please refer to pages 14~15 of this catalogue.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile
section diagram. (Open-in side hung window, turn-and-tilt window hardware system and profile size matching requirements)
1 Open in & turn & tilt window hardware series
2-∅5.5
L5=W/2-152
L1=H/2-157.5
Keep 3mm gap when
installing
Before installation After installation
Keep head of
screw flat with
surface after
fixing
Keep head of
screw flat with
surface after
fixing
I, II, III Accessories Hexagon Screw Installation diagram
1 2 3 4
Keep head of
screw flat with
surface after
fixing
①、②、③、④、⑤、⑥
Adjustable linear
eccentricity is ±1.4
Adjustable linear
eccentricity is ±1.4
Illustration for Corner cutting of sash
Drilling drawing
for handle
LCZS38
Alu.transmission rod
drilling illustration W(Width for
end to end of
sash groove)
Sash height can be
slightly adjusted by
adjusting the screw.
No need turn out
the screw for intitial
installation
Close state
Open state
Tilt state
H(Height for top to top of sash groove)
Note: “ ”stands for specification for socket head wrench
NPD200 Series Adjustment Illustration for Turn-and-Tilt Window With
Multi-point Lock on 4 Sides
14 / 15
NPD200 Series Adjustment Illustration for Turn-and-Tilt Window With
Multi-point Lock on 4 Sides
★ Installation sequence for hardware
in sequence of picture 1, 2, 3...
Side
transmission
rod N37A
Ttransmission
rod LCDG41
Aluminium
strip L6
Picture 1
Side
transmission
rod N37A
Alu
transmission
rod L3
Alu
transmission
rod L4
Midtransmission
Rod N36A
Top
Connector
rod N8C
Corner
device LZB5
Aluminium
Strip L5
Picture 2
Picture 3
Picture 4
Misuse preventer
FWG10A
Alu transmission
rod L1
Alu transmission
rod L2
Corner
device
LZB5
Overturn supporter
LN56
Feature of FWG10A
◆ Combine function
of transmitting and
preventing
misoperation;
◆ Simple structure but
strong practicality
◆ High safety,
effectively
avoiding incidents
caused by
misoperation
operation;
◆ Fast installation
Misuse preventer
FWG10A
Handle
LCZS38
Loose
preventer
FSP10
Corner device
ZA2
Picture 6
Picture 5
Cut off the
sealing rubber
strip at part
and before
installing pivot
hinge
1
2
Screw for
corner
Picture 7
Bottom hinge
NDHB10B
Bottom hinge NDHB10B
Feature of NDHB10B
◆ Hinge axis is made
of stainless steel;
◆ High bearing capacity;
◆ High security;
◆ Adjustability
◆ Fast installation;
◆ Interchangeable
(left & right)
Picture 8
Picture 9
Feature of NDHA10B
◆ Hinge axis is made of
stainless steel;
◆ High bearing capacity;
◆ High security;
◆ Fast installation;
◆ Interchangeable (left & right)
Upper hinge NDHA10B
1 Open in & turn & tilt window hardware series
01
02
03
04
05
06
07
08
17 16
09 09
12
14
13
15
19
15
10
11 18
1-4 NPD300 Series Concealed Turn-and-Tilt Window With
Multi-point Lock On Multi Sides
16 / 17
Number Product name Code Quantity Remark
01 Handle LFZS13 1
02 Transmitter LCDQ21 1
03 Locking plate ZA1-6A 1 ①
04 Corner device LZA4 1
05 Overturn supporter LN56 1
06 Disengagement preventer LN57 1
07 Supporting block LZCK05 1
08 Cushion block N33A 1
09 Water cap FSG-01 2
10 Upper pivot hinge LYHPS40A 1
Left & right ② ③ ④
11 Bottom pivot hinge LYHDX40B 1
12 Corner device LZB5 1
13 Intermediate drive lever LCDG41 1
14 Side transmission rod N37A 1
15 Locking plate ZA1-6A 2
16 Safety device AQS10 1
17 Locking plate SK29 1
18 Limiter LPX30A 1
19 Handle LFZS20 1
Hardware Configuration for NPD300 Series
Configuration instruction:
① Recommended distance between lock points should be≤400mm.
② Applicable sash width 550-800mm and height 600-1500mm. When width is 380-550mm, item of number
10 can be changed to LYHPS42A. (Height and width are distances between edges of window profile)
③ Maximum load bearing capacity is 90KG and suggested proportion of the width and height is 1.5:1., for hinge selection,
please refer to pages 157 of this catalogue, \"concealed hinge selection specifications\" for adaptability proofreading.
④ When multi-lock points on four sides are used, the hardware LYHPS40A should be replaced by LYHPS41A.
★ Items in green are optional.
★ Please refer to pages 19 of this booklet for the opening and installation instructions of the child safety lock.
★ It is recommended to use with the casement window limiter to achieve the best effect. for the optional installation
requirements of the limiter, please refer to the limiter series on pages 153~154 of this atlas.
★ For the installation and adjustment of the product, please refer to pages 18~19 of this catalogue.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile
section diagram. (Open-in side hung window, turn-and-tilt window hardware system and profile size matching requirements)
★ There is no exposed portion outside the window after concealed hinges are installed, which improves the performance of
tightness and makes the door and windowmore energy -savingand environmental friendly. handle base plateand hand
holdaredesignedas one unit, whichcanreduce the exposingarea and make the windowlook more beautiful.
★ When the transmitter is used with other spindle handles, the opening of the handle is different.
1 Open in & turn & tilt window hardware series
L1=W-415
L2=H/2-225 L3=H/2-225
NPD300 Series Adjustment Illustration for Concealed Turn-and-Tilt Window
With Multi-point Lock On Multi Sides
keep head of screw flat with
surface after fixing,
Using 2.5mm socket
head wrench
T h e a d j u s t i n g
block is attached to
the protuberance
during the initial
installation
Tighten the screw and
push up the adjusting
block when installing
I Accessories Hexagon Screw Installation diagram
1 2 3
①、②
Adjustable linear
eccentricity is ±1.4
illustration for Corner cutting of sash
Lock Point eccentricity
adjustable ± 1
Alu transmission rod
drilling illustration
Drilling drawing
for handle
Adjustable left
and right
±1.5mm
Adjustable Front
and back
±0.6mm
Alu.transmission rod
drilling illustration
Adjustable up
and down
+2mm,
-1mm
Open state
Close state
Tilt state
W(Width for
top to top of
sash groove)
H (Height for top to top of sash groove)
Note: “ ”stands for specification for socket head wrench
18 / 19
NPD300 Series Installation Illustration for Concealed Turn-and-Tilt Window
With Multi-point Lock On Multi Sides
★ Installation sequence for hardware
in sequence of picture 1, 2, 3...
Picture 2
Feature of LZA4
◆ Combine function of
transmitting and preventing
misoperation;
◆ High safety, effectively
avoiding incidents caused
by misoperation operation;
◆ Compact design for fast
installation
Anti mis-operation
corner device
LZA4
Alu
transmission
rod L2
Alu
transmission
rod L3
Overturn
supporter LN56
Upper hinge
Alu transmission LYHPS40A
rod L1
Picture 1
Feature of LYHPS40A
◆ Concealed installation design
◆ Strong load bearing
performance
◆ Quick installation
◆ 3D adjustable
◆ Improve window sash cornering
Feature of LCDQ21
◆ Smooth transmission,
stable performance
◆ Simple structure but
strong practicality
◆ Clamp type installation,
convenient and fast
◆ Anti-deflection design
Picture 3
Picture 5
Handle
LFZS13
Feature of LYHDX40B
◆ Concealed
installation design
◆ Strong load bearing
performance
◆ High security
◆ 3D adjustable
◆ Quick installation
Hinge
LYHDX40B
Transmitter
LCDQ21
Picture 4
Feature of N33A
◆ Reset and correct position
of sash and frame;
◆ Quick installation
Cushion
block N33A
Child Safety Lock AQS10/SK29-Hole Cuts, Installation and Adjustment Diagram
1 Open in & turn & tilt window hardware series
01
03
02
04
05
06
07
08 10 10
09
12
11
13
14
1-5 NPD400 Series Concealed Multi-point Lock Open In
Top Hung Window (180° Open)
20 / 21
Number Product name Code Quantity Remark
01 Handle LCZS42 1 Optional
02 Loose preventer FSP10 1
03 Main transmission rod N55 1
04 Locking plate ZA1-6A 1 ①
05 Corner device LZA4 1
06 Overturn supporter LN56 1
07 Disengagement preventer LN57 1
08 Supporting block LZCK05 1
09 Cushion block N33A 1
10 Water cap FSG-01 2
11 Upper pivot hinge LYHPS50 1
Left & right ② ③
12 Bottom pivot hinge LYHDX50 1
13 Safety lock AQS10 1
14 Locking plate SK29 1
Configuration instruction:
① Recommended distance between lock points should be≤400mm.
② Applicable sash width 550-800mm and height 600-1500mm. When width is 380-550mm, item of number
11 can be changed to LYHPS52. (Height and width are distances between edges of window profile)
③ Bearing capacity: ≤70Kg. It is recommended to keep the window size ratio (height / width) at 1.5: 1.
★ Green accessories are optional.
★ Please refer to pages 19 of this booklet for the opening and installation instructions of the child safety lock.
★ For the installation and adjustment of the product, please refer to pages 22~23 of this catalogue.
★ There is no exposed portion outside the window after concealed hinges are installed, which improves the performance of
tightness and makes the door and windowmore energy -savingand environmental friendly. handle base plateand hand
holdaredesignedas one unit, whichcanreduce the exposingarea and make the windowlook more beautiful.
★ When the transmitter is used with other spindle handles, the opening of the handle is different.
Handle LCZS09 Handle CZS20 Handle LCZS39 Handle LCZS40 For more handles ....
Hardware Configuration for NPD400 Series
Optional handles for reference:
please refer to
pages 108~127 of
this catalogue.
1 Open in & turn & tilt window hardware series
1 2 3
L1=W-440.5
L2=H/2-159 L3=H/2-159
NPD400 Series Concealed Multi-point Lock Open In Top Hung Window
Blanking & Adjustment Diagram
I Accessories Hexagon Screw Installation diagram
keep head of screw flat
with surface after fixing,
Using 2.5mm socket
head wrench
The adjusting
block is attached to
the protuberance
during the initial
installation
Tighten the screw and
push up the adjusting
block when installing
①、②
Adjustable linear
eccentricity
is ±1.4
illustration for Corner cutting of sash
Lock Point eccentricity
adjustable ± 1
Lock Point eccentricity
adjustable ± 1.2
Drilling drawing for
handle LCZS42
Alu transmission rod
drilling illustration
W(Width for
top to top of
sash groove)
Open state
Close state
Tilt state
H(Height for top to top of sash groove)
Hinge
Adjustable
up and down
+2mm
Note: “ ”stands for specification for socket head wrench
22 / 23
NPD400 Series Concealed Multi-point Lock Open In Top Hung Window
Installation Diagram
★ Installation sequence for hardware
in sequence of picture 1, 2, 3......
Picture 2
Anti mis-operation
corner device
LZA4
Alu
transmission
rod L2
Alu
transmission
rod L3
Main
transmission
rod N55
Overturn
supporter
LN56
Feature of LZA4
◆ Combine function of
transmitting and preventing
misoperation;
◆ High safety, effectively
avoiding incidents caused
by misoperation operation;
◆ Compact design for fast
installation
Picture 1
Hinge LYHPS50
Alu
transmission rod
L1
Feature of LYHPS50
◆ Concealed installation design
◆ Strong load bearing
performance
◆ Quick installation
◆ Adjustable (left & right)
◆ Improve window sash cornering
◆ Casement open 180° open
Picture 4
Feature of N33A
◆ Reset and correct position
of sash and frame;
◆ Quick installation
Cushion
block N33A
Picture 5
Feature of LN57
◆ At the same time to provide
locking and anti-trip function
◆ The positioning block
TSQ10-07 can be used for
quick installation.
Disengagement
preventer
LN57
Picture 3
Handle LCZS42
Loose
preventer
FSP10
Main
transmission
rod N55
Picture 6
Feature of LYHDX50
◆ Concealed
installation design
◆ Strong load bearing
performance
◆ High security
◆ Adjustable (up & down)
◆ casement open 180°
open
Hinge
LYHDX50
ST4.2
countersunk head
1 Open in & turn & tilt window hardware series
12
06
05
04
02 03
01
04
07
15 14
10
09 11
16
11
13
08
1-6 NPD500 Series Turn-and-Tilt Window with Multi-point Lock On 2 Sides
24 / 25
Number Product name Code Quantity Remark
01 Handle LCZS91 1 Optional
02 Misuse preventer FWG10A 1 Include small lock plate
03 Loose preventer FSP10 1
04 Locking plate ZA1-6A 2 ①
05 Corner device ZC1 1
06 Small connector rod LG51 1 ②
07 Overturn supporter N53 1
08 Disengagement preventer N31 1
09 Supporting block LZCK05 1
10 Cushion block N33A 1
11 Waterproof cap FSG-01 2
12 Upper pivot hinge BHYA11 1
Left & right ③
13 Bottom pivot hinge BHYB11 1
14 Safety lock AQS10 1
15 Locking plate SK29 1
16 Limiter LPX17 1 The length depends on window
dim ension
Hardware Configuration for NPD500 Series
Configuration instruction:
① It is recommended to keep the lock point distribution distance within 400mm.
② It can meet the window type with a window sash width of 450-650mm and a window sash height of 600-1800mm.
(Height and width are distances between edges of window profile)
③ Bearing capacity: ≤70Kg. It is recommended to keep the window size ratio (height / width) at 1.5: 1.
★ Green accessories are optional.
★ Please refer to pages 19 of this booklet for the opening and installation instructions of the child safety lock.
★ It is recommended to use with the casement window limiter to achieve the best effect. for the optional installation
requirements of the limiter, please refer to the limiter series on pages 153~154 of this atlas.
★ For the installation and adjustment of the product, please refer to pages 26~27 of this catalogue.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile
section diagram. (open-in side hung window, turn-and-tilt window hardware system and profile size matching
requirements)
★ The handle of this series, the hinge is made of stainless steel, to ensure better corrosion resistance and exquisite
appearance of the product, so that the entire window sash is full of metal texture.
1 Open in & turn & tilt window hardware series
1 2 3
NPD500 Series Adjustment illustration for Turn-and-Tilt Window with
Multi-Point Lock on 2 sides
I Accessories Hexagon Screw Installation diagram
Keep 3mm gap when
installing
Keep head of
screw flat with
surface after
fixing
Before installation After installation
①、②
Adjustable linear
eccentricity
is ±1.4
illustration for Corner cutting of sash
Drilling drawing for
handle LCZS91
Alu transmission rod
drilling illustration
W(Width for
top to top of
sash groove)
Lock Point eccentricity
adjustable ± 1.4
Keep head of
screw flat with
surface after
fixing
sash height can be
slightly adjusted by
adjusting the screw.
No need turn out
the screw for first
installation
Open state
Close state
Tilt state
H(Height for top to top of sash groove)
Note: “ ”stands for specification for socket head wrench
26 / 27
NPD500 Series Adjustment Illustration for Turn-and-Tilt Window with
Multi-point Lock On 2 sides
★ Installation sequence for hardware
in sequence of picture 1, 2, 3......
Picture 1
Alu
transmission
rod L3
Connector
Rod LG51
Feature of LG51
◆ zigzag design avoids damaging the profile.
◆ Locating piece design for fast installation.
◆ The flexible opening feeling of bottom-hung
operation.
◆ Locking point matches with V-groove.
◆ Improve sash dropping occurrence.
Cut off the
sealing rubber
strip at part
and before
installing pivot
hinge
1
2
Picture 2
Corner
device
ZC1
Alu
transmission
rod L2
Alu
transmission
rod L1
Misuse
Preventer
FWG10A
Overturn
supporter
N53
Feature of ZC1
◆ Eccentric structure design,
mainbody is in zigzag
structure
◆ can avoid damaging profile
◆ mute device applied for
smooth transmitting and
avoid noise
◆ compact design for fast
installation
Feature of FWG10A
◆ Combine function of
transmitting and preventing
misoperation;
◆ Simple structure and
practicability
◆ High safety, effectively
avoiding incidents caused
by misoperation.
◆ Fast installation Picture 3
Misoperation
Preventer
FWG10A
Loose
preventer
FSP10
Handle
LCZS91
Picture 4
Feature of N33A
◆ Reset and correct position h
of sas and frame;
◆ Quick installation
Cushion
block N33A
Picture 6
Connector
Rod LG51
Connector
Rod LG51
Feature of BHYA11
◆ Hinge axis is made of
stainless steel.
◆ High bearing capacity.
◆ High security.
◆ Fast installation.
◆ Interchangeable(Left&Right)
Upper hinge
BHYA11
Upper hinge
BHYA11
Picture 5
Feature of BHYB11
◆ Hinge axis is made of
stainless steel.
◆ High bearing capacity.
◆ Adjustable.
◆ Fast installation.
Keep
1mm
Down
hinge
BHYB11
Down
hinge
BHYB11
Bottom axis
blcok touch
close to sash
groove
1 Open in & turn & tilt window hardware series
05
04
03
02
01
04
08
10
07
19
21
20
17
17
17
14
16
18
15
15
09
11
11
06
13
12
1-7 SPD100 Series Tilt-and-Turn Window With Multi-point Lock On Multi Sides
28 / 29
Number Product name Code Quantity Remark
01 Handle LCZS38 1 Optional
02 Loose preventer FSP10 1
03 Main transmission rod N55 1
04 Locking plate ZA1-6A 2 ①
05 Security corner device ZA6 1 Include small lock plate
06 Slanting connector rod LG21A 1 ②
07 Overturn supporter FZS 1 Left & right
08 Side disengagement preventer XZSK-A 1
09 Supporting block LZCK05 1
10 Cushion block N33A 1
11 Waterproof cap FSG-01 2
12 Upper pivot hinge NDHA10B 1
Left & right ③ 13 Bottom pivot hinge NDHB10B 1
14 Corner device LZB5 1
15 Side transmission rod N37A 2
16 Intermediate drive lever LCDG41 1
17 Locking plate ZA1-6A 3
18 Slanting connector rod XN8A 1 ③
19 Transmission rod CDG20 1
20 Corner device ZB3 1
21 Tilt Locking plate SK25 1
Handle LCZS09 Handle CZS20 Handle LCZS39 Handle LCZS40 For more handles ....
Hardware Configuration for SPD100 Series
Optional handles for reference:
please refer to
pages 108~127 of
this catalogue.
Configuration instruction:
① Recommended distance between lock points should be ≤ 400mm.
② Sash dimensions as follow:width 450-650mm, height 600-1800mm, when width is 320-450mm,
item number 6 can be changed to LG22A. (Height and width are distances between edges of window profile)
③ Basic load bearing capacity is 90Kg, suggested proportion of the height to width within is 1.5:1.
④ It can meet the window type with a window sash width of 650-1000mm and a window sash height of 600-2000mm.
★ Green accessories are optional.
★ For the installation and adjustment of the product, please refer to pages 30~31 of this catalogue.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile section
diagram. (Open-in side hung window, turn-and-tilt window hardware system and profile size matching requirements)
1 Open in & turn & tilt window hardware series
2-∅5.5
1 2 3
SPD100 Series Adjustment Illustration for Tilt-and-Turn Window With
Multi-point Lock On Multi Sides
I, II, Accessories Hexagon Screw Installation diagram
Keep 3mm gap when Keep head of installing screw flat with
surface after
fixing
Keep head of screw
flat with surface
after fixing
Before installation After installation
①、②
Adjustable linear
eccentricity
is ±1.4
illustration for Corner cutting of sash
Lock Point eccentricity
adjustable ± 1.4
Alu transmission rod
drilling illustration
Drilling drawing
for handle
LCZS38
Close state
Tilt state
Open state
W(Width for
top to top of
sash groove)
H (Height for top to top of sash groove)
Sash height can be
slightly adjusted by
adjusting the screw.
no need turn out
the screw for first
installation.
Note:“ ”stands for specification for socket head wrench
30 / 31
SPD100 Series Installation Illustration for Tilt-and-Turn Window With
Multi-point Lock O Multi Sides
Picture 1
Feature of LG21A
◆ Open limit design; The flexible open
feeling
◆ The flexible opening feeling of
bottomhung operation;
◆ Locking point matches with V-groove
◆ Improve sash dropping occurrence
Alu
transmission
rod L1
Slanting
connector
Rod LG21A
★ Installation sequence for hardware
in sequence of picture 1, 2, 3......
Picture 2
Alu
transmission
rod L3
Main
transmission
rod N55
Alu
transmission
rod L2
Overturn
supporter
FZS
Security corner
device ZA6
Feature of ZA6
◆ Combine function of
transmitting and
preventing misuse.
◆ High safety, effectively
avoid misoperation.
◆ Child lock design to
ensure the safety of
children.
◆ Fast installation.
Cut off the
sealing rubber
strip at part
and before
installing pivot
hinge
1
2
Picture 4
Handle
LCZS38
Main
transmission
Rod N55
Loose
preventer
FSP10
Picture 5
Feature of NDHB10B
◆ Hinge axis is made of
stainless steel.
◆ High bearing capacity.
◆ High security.
◆ Adjustable.
◆ Fast installation.
◆ Interchangeable(Left&Right)
Bottom hinge
NDHB10B
Picture 3
Picture 6
Feature of N33A
◆ Reset and correct position
of sash and frame;
◆ Quick installation
Cushion
block N33A
Feature of NDHA10B
◆ Hinge axis is made of
stainless steel.
◆ High bearing capacity.
◆ High security.
◆ Fast installation.
◆ Interchangeable(Left&Right)
Upper hinge
NDHA10B
1 Open in & turn & tilt window hardware series
16
17
16
15
14
13
10
10
04
04
03
04
06
01
02
08
07
09
05
12
11
1-8 SPD300 Series Concealed Tilt-and-Turn Window With
Multi-point Lock On Multi Sides
32 / 33
Number Product name Code Quantity Remark
01 Handle LFZS13 1
02 Transmitter LCDQ21 1
03 Error proofing corner device LZA4 1
04 Locking Plate ZA1-6A 3 ①
05 Corner Device ZB3 1
06 Transmission Rod CDG20 1
07 Tilt Locking Plate SK25 1
08 Side Transmission Rod N37A 1
09 Supporting Block LZCK05 1
10 Water Cap FSG-01 2
11 Upper Pivot Hinge LYHDS40A 1
Left&Right ② ③ ④
12 Bottom Pivot Hinge LYHDX40B 1
13 Corner Device LZB5 1
14 Intermediate drive lever LCDG41 1
15 Side Transmission Rod N37A 1
16 Locking Plate ZA1-6A 2
17 Handle LFZS20 1
Hardware Configuration for SPD300 Series
Configuration instruction:
① Recommended distance between lock points should be ≤ 400mm
② Sash dimensions as follow: width 550-800mm, height 600-1500mm,when width is 380-550mm,
item of number 11 can be changed to LYHDS42A. (Height and width are distances between edges of window profile)
③ Maximum loas bearing capacity is 90KG. suggested proportion of the width and height is 1.5:1, for hinge selection,
please refer to pages 157 of this catalogue, \"concealed Hinge Selection Specifications\" for adaptability proofreading.
④ When multi-locking points on four sides are used, the hardware LYHDS40A Should be replaced by LYHDS41A.
★ Green accessories are optional.
★ There is no exposed portion outside the window after concealed hinges are installed, Which improves the performance of
tightness and makes the door and windowmore energy -savingand environmental friendly. handle base plateand hand
holdaredesignedas one unit, whichcanreduce the exposingarea and make the windowlook more beautiful.
★ For the installation and adjustment of the product, please refer to pages 34~35 of this catalogue.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile
section diagram. (Open-in side hung window, turn-and-tilt window hardware system and profile size matching
requirements)
★ When the transmitter is used with other spindle handles, the opening of the handle is different.
1 Open in & turn & tilt window hardware series
1 2 3
L1=W-415
L2=H/2-225 L3=H/2-243.5
L4=(W-220)/2
SPD300 Series Adjustment Illustration for Concealed Window With
Multi-point Lock On Multi Sides
Tighten the screw and
push up the adjusting
block when installing
The adjusting
block is
attached to the
protuberance
during the initial
installation
I Accessories Hexagon Screw Installation diagram
keep head of screw flat
with surface after fixing,
Using 2.5mm socket
head wrench
W(Width for
top to top of
sash groove)
Alu.transmission rod
drilling illustration
Drilling drawing
for handle
Illustration for corner
cutting of sash
①、② Adjustable
linear eccentricity
is ±1.4
Adjustable linear
eccentricity is ±1
Close state
Open state
Tile state H (Height for top to top of sash groove)
Alu.transmission rod
drilling illustration
Adjustable left
and right
±1.5mm
Adjustable Front
and back
±0.6mm
Adjustable up
and down
+2mm,
-1mm
Note: “ ”stands for specification for socket head wrench
Lock Point
eccentricity
adjustable ±
1.4
34 / 35
SPD300 Series Installation Illustration for concealed Tilt-and-Turn Window With
Multi-point Lock On Multi Sides
★ Installation sequence for hardware
in sequence of picture 1, 2, 3......
Picture 2
Picture 3
Feature of LZA4
◆ Combine function of
transmitting and
preventing misuse.
◆ High safety, effectively
avoid misoperation.
◆ compact design for
fast installation
Anti misoperation
corner device
LZA4
Alu
transmission
rod L2
Alu
transmission
rod L3
Transmission
rod CDG20
Picture 1
Alu transmission
rod L1
Hinge
LYHDS40A
Feature of LYHDS40A:
◆ Concealed installation design
◆ Strong load bearing
performance
◆ Quick installation
◆ Three-dimensional
adjustable
◆ Improve sash dropping
occurrence.
Picture 4
Feature of ZB3:
◆ Suspension
device design
as hook type
◆ Fix frame and
sash tightly
◆ Quick installation
Side transmission
Rod N37A
Alu transmission
rod L4
Corner
device ZB3
Picture 5
Transmitter
LCDQ21
Handle
LFZS13
Feature of LCDQ21:
◆ mooth transmission,
stable performance
◆ Simple structure but
strong practicality
◆ Clamp type installation,
convenient and fast
◆ Anti-deflection design
Hinge
LYHDX40B
Picture 6
Feature of LYHDX40B:
◆ Concealed
installation design
◆ Strong load bearing
performance
◆ High safety
◆ 3D adjustable
◆ Quick installation
1 Open in & turn & tilt window hardware series
10
09
11
08
06
06
07
07
04
01
02
03
05
04
05
2-1 NP100 Series Open-in Side Hung Window With
Two-point Lock On Single Side
36 / 37
Number Product name Code Quantity Remark
01 Handle LCZS39 1 Optional
02 Loose preventer FSP10 1
03 Main transmission rod N55 1
04 Side transmission Rod N39 2
05 Locking plate ZA1-6A 2
06 Pivot hinge N4B 2 Optional
07 Waterproof cap FSG-01 2
08 Supporting block N34A 1
09 Cushion block N33A 1
10 Middle locking plate SK70 1
11 Limiter LPX17 1 The length depends on window
dim ension
Configuration instruction:
★ Items in green are optional.
★ Suggest taking middle locking plate to prevent sash deformation and to ensure seal ability for large size window
★ It is recommended to use with the casement window limiter to achieve the best effect. for the optional installation
requirements of the limiter, please refer to the limiter series on pages 153~154 of this atlas.
★ For the installation and adjustment of the product, please refer to pages 50~51 of this catalogue.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile section
diagram. (Open-in side hung window, turn-and-tilt window hardware system and profile size matching requirements)
Handle LCZS58 Handle LCZS59 Handle LCZS209 Handle LCZS240 For more handles ....
Hinge N2C Hinge J3 Hinge CJ4A Hinge LCJ16 For more hinges ....
Hardware Configuration for NP100 Series
Optional handles for reference:
Optional hinges for reference:
please refer to
pages 108~127 of
this catalogue.
please refer to
pages 129~136 of
this catalogue.
2 Open-in Side-Hung Series
10
09
11
08
06
06
07
07
04
01
02
03
05 04
05
2-2 NP100T Series Open-in Side Hung Window With
Two-point Lock On Single Side (Anti-prying)
38 / 39
Number Product name Code Quantity Remark
01 Handle LCZS39 1 Optional
02 Loose preventer FSP10 1
03 Main transmission rod N55 1
04 Side transmission Rod N39T 2
05 Locking plate SK38 2 Left&Right
06 Pivot hinge N4B 2 Optional
07 Waterproof cap FSG-01 2
08 Supporting block N34A 1
09 Cushion block N33A 1
10 Middle locking plate SK70 1
11 Limiter LPX17 1 The length depends on window
dim ension
Configuration instruction:
★ Items in green are optional.
★ Suggest taking middle locking plate to prevent sash deformation and to ensure seal ability for large size window
★ It is recommended to use with the casement window limiter to achieve the best effect. for the optional installation
requirements of the limiter, please refer to the limiter series on pages 153~154 of this atlas.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile section
diagram. (Open-in side hung window, turn-and-tilt window hardware system and profile size matching requirements)
Handle LCZS58 Handle LCZS59 Handle LCZS209 Handle LCZS240 For more handles ....
Hinge N2C Hinge J3 Hinge CJ4A Hinge LCJ16 For more hinges ....
Optional handles for reference:
Optional hinges for reference:
please refer to
pages 108~127 of
this catalogue.
please refer to
pages 129~136 of
this catalogue.
Hardware Configuration for NP100T Series
2 Open-in Side-Hung Series
07
05
06
06
05
04
04
01
02
03
03
10
12
12
11
09
08
2-3 NP110 Series Open-in Side Hung Window With
Two-point Lock On Single Side
40 / 41
Number Product name Code Quantity Remark
01 Handle CZS220A 1 Optional
02 Main transmission rod N55 1
03 Active lock point HDS4 2 Refer to active lock points operation
instruction ①
04 Locking plate ZA1-6A 2
05 Pivot hinge J3 2 Optional
06 Waterproof cap FSG-01 2
07 Middle locking plate SK70 1
08 Supporting block N34A 1
09 Cushion block N33A 1
10 Transmission rod LZDC03-L 1 The length depends on window dim ension
11 Limiter LPX17 1 The length depends on window dim ension
12 Mute block JYK30 2 ②
Hardware Configuration for NP110 Series
Configuration instruction:
① Please refer to page 51 of this catalogue for the instructions of using the active locking point.
② Adding a mute block can effectively improve the mute effect and create a beautiful and quiet atmosphere.
(The holes for the installation of the mute block needs to be opened by the customer)
★ Items in green are optional.
★ Suggest taking middle locking plate to prevent sash deformation and to ensure seal ability for large size window.
★ It is recommended to use with the casement window limiter to achieve the best effect. for the optional installation
requirements of the limiter, please refer to the limiter series on pages 153~154 of this atlas.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile section
diagram. (Open-in side hung window, turn-and-tilt window hardware system and profile size matching requirements)
Handle LCZS58 Handle LCZS59 Handle LCZS209 Handle LCZS240 For more handles ....
Optional handles for reference:
Optional hinges for reference:
please refer to
pages 108~127 of
this catalogue.
Hinge N2C Hinge J2B Hinge CJ4A Hinge LCJ16 For more hinges ....
2 Open-in Side-Hung Series
please refer to
pages 129~136 of
this catalogue.
11
10
12
09
08
08
04
01
02
03
05
04
05
07
06
2-4 NP300 Series Concealed Open-in Side-hung Window With
Two-point Lock On Single Side
42 / 43
Hinge LYHE20 Hinge LYHE21 For more hinges ....
Number Product name Code Quantity Remark
01 Handle LCZS39 1 Optional
02 Loose preventer FSP10 1
03 Main transmission rod N55 1
04 Side transmission rod N39 2
05 Locking plate ZA1-6A 2
06 Hinge LYHE11-R 1
Left & right
07 Hinge LYHE11-L 1
08 Waterproof cap FSG-01 2
09 Supporting block N34A 1
10 Cushion block N33A 1
11 Middle locking plate LSK72 1
12 Limiter LPX30A 1
Configuration instruction:
★ Items in green are optional.
★ Suggest taking middle locking plate to prevent sash deformation and to ensure seal ability for large size window
★ It is recommended to use with the casement window limiter to achieve the best effect. for the optional installation
requirements of the limiter, please refer to the limiter series on pages 153~154 of this atlas.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile
section diagram. (Open-in side hung window, turn-and-tilt window hardware system and profile size matching
requirements)
Handle LCZS58 Handle LCZS59 Handle LCZS209 Handle LCZS240 For more handles ....
Hardware Configuration for NP300 Series
Optional handles for reference:
please refer to
pages 108~127 of
this catalogue.
Optional handles for reference:
Please refer to
pages 129~136 of
this catalogue.
2 Open-in Side-Hung Series
10
09
08
08
04
01
02
03
05
04
05
07
06
2-5 NP400 Series Concealed Open-in Side-hung Window With
Two-point Lock On Single Side (180°open)
44 / 45
Number Product name Code Quantity Remark
01 Handle LCZS39 1 Optional
02 Loose preventer FSP10 1
03 Main transmission rod N55 1
04 Side transmission rod N39 2
05 Locking plate ZA1-6A 2
06 Hinge LYHE19-R 1
Left & right ①
07 Hinge LYHE19-L 1
08 Waterproof cap FSG-01 2
09 Supporting block N34A 1
10 Cushion block N33A 1
Configuration instruction:
① Basic load bearing capacity is 60KG, suggested proportion of the height to width within is 1.5:1.
★ Items in green are optional.
★ Adaptation requirements: standard 20C groove profile, please refer to page 2 of this catalogue for the specific profile
section diagram. (Open-in side hung window, turn-and-tilt window hardware system and profile size matching
requirements)
Hardware Configuration for NP400 Series
Handle LCZS58 Handle LCZS59 Handle LCZS209 Handle LCZS240 For more handles ....
Optional handles for reference:
please refer to
pages 108~127 of
this catalogue.
2 Open-in Side-Hung Series
2-6 DK100 Series Double-leaf Window With
C-groove And False Mullion 9
11 11
08
08
07
07
06
05
05
04
04
04
06
07
07
01
02
03
04
9
10
12
12
10




