铝门窗五金典型产品目录 - 电子画册在线预览、各类电子画册在线制作-云展网平台

296 / 297

Sliding Lock Series

TLS20

TLS20L

TLS18S

◆ Master key

◆ Anti-misoperation sliding lock

14 Sliding Lock Series

Sliding Lock Series TLS20HL

TLS21/TLS21K

TLS20H ◆ The mounting screw size depends on profile thickness.

◆ Anti-misoperation sliding lock

◆ The mounting screw size depends on profile thickness.

◆ Anti-misoperation sliding lock

◆ Manual lock with safety buckle

298 / 299

Sliding Lock Series

TLS21H

TLS23

TLS21HS

◆ No master key

◆ 26mm~31mm Profile thickness, need to be customized.

◆ It is recommended to be used with transmission rod

TLG11which for C groove.

14 Sliding Lock Series

Sliding Lock Series SDS18/ZDS18

SDS11

TLS23HS

TLS23H ◆ It is recommended to be used with transmission rod

TLG11which for C groove.

◆ It is recommended to be used with transmission rod

TLG11which for C groove.

◆ Adjustable sliding lock, hole-driling error is within ±2mm. Recommended products of building door

and window accessories committee

◆ No master key

◆ 26mm~31mm Profile thickness, need to be customized.

◆ It is recommended to be used with transmission rod

TLG11which for C groove.

Patented product

300 / 301

Sliding Lock Series

SDS11H

SDS12

SDS12HA

TLS30

◆ It is recommended to be used with transmission rod

TLG11which for C groove.

◆ It is recommended to be used with transmission rod

TLG11which for C groove.

◆ It is recommended to be used with transmission rod

TLG11which for C groove.

◆ It is recommended to be used with transmission rod

TLG11which for C groove.

14 Sliding Lock Series

Sliding Lock Series DLS10S

DLS10HS

DLS10 ◆ Left & right, the mounting screw size depends on profile thickness.

◆ Use the fixing sleeve to fix the handle when

only single side handle to be chosen.

◆ The lock hook position is adjustable, up and down.

◆ Left & right, the mounting screw size depends on profile thickness.

◆ Use the fixing sleeve to fix the handle when

only single side handle to be chosen.

◆ The lock hook position is adjustable, up and down.

◆ Non-master key.

◆ Left & right, the mounting screw size depends on profile thickness.

◆ The lock hook position is adjustable, up and down

◆ Non-master key

Fixing

sleeve

Fixing

sleeve

Fixing

sleeve

Fixing

sleeve

(Default standard)

(Optional)

302 / 303

Sliding Lock Series

T-DLS20

T-DLS20S

T-DLS20HS

◆ The mounting screw size depends on profile thickness.

◆ Use the fixing sleeve to fix the handle when

only single side handle to be chosen.

◆ The lock hook position is adjustable, up and down, forward and backward

◆ The locking hook can be replaced with a tongue. The code is T-DLS21

◆ Left & right, the mounting screw size depends on profile thickness.

◆ Use the fixing sleeve to fix the handle when

only single side handle to be chosen.

◆ The lock hook position is adjustable, up and down, forward and backward

◆ The locking hook can be replaced with a tongue. The code is T-DLS21S

◆ Left & right, the mounting screw size depends on profile thickness.

◆ The lock hook position is adjustable, up and down, forward and backward

◆ Non-master key

◆ The locking hook can be replaced with a tongue. The code is T-DLS21HS

Patented product

14 Sliding Lock Series

Fixing

sleeve

Fixing

sleeve Fixing

sleeve

Fixing

sleeve (Default standard)

(Default standard)

(Optional)

Sliding Lock Series DLS10H/I

DLS10H/II

T-DLS20H/I

T-DLS20H/II

◆ Left & right, the mounting screw size depends on profile thickness.

◆ The lock hook position is adjustable, up and down.

◆ The mounting screw size depends on profile thickness.

◆ The lock hook position is adjustable, up and down, forward and backward

◆ The locking hook can be replaced with a tongue. The code is T-DLS21H/I

◆ The mounting screw size depends on profile thickness.

Patented product

(Default standard)

(Optional)

304 / 305

Sliding Lock Series

T-DGS01

T-GSK01

T-DGS01W

T-DGS01H

◆ Left & right, matched with T-GSK01

◆ Lock hook is adjustable, with cylinder,

the length of flat pin is 44/72mm

◆ Anti falling buckle cover, a key

doesn't work.

◆ Left & right, matched with T-GSK01

◆ The lock hook is adjustable with out

lock cylinder

◆ Anti falling buckle cover

◆ Without lock hook and lock cylinder

◆ Anti falling buckle cover

Product introduction is detailed on page 334

14 Sliding Lock Series

T-DGS02

T-DGS02W

T-DGS02H

T-GSK01

Sliding Lock Series T-GSK01

T-GSK01

Product introduction is detailed on page 334

◆ Left & right, matched with TGSK01

◆ Lock hook is adjustable, with cylinder,

the length of flat pin is 54/82mm

◆ Anti falling buckle cover, a key

doesn't work.

◆ Left & right, matched with T-GSK01

◆ The lock hook is adjustable

without lock cylinder

◆ Anti falling buckle cover

◆ No need to distinguish left or right type

◆ Without lock hook and lock cylinder

◆ Anti falling buckle cover

306 / 307

T-U01

U05

U03C

T-U02

Locking Plate Series

14 Locking Plate Series

Locking Plate Series T-U25

U07

T-U26

U09

308 / 309

Locking Plate Series

T-U19

U10

U15

U40

14 Locking Plate Series

Locking Plate Series TLK-11A

TLK-13B

TLK-14

TLK15B

◆ Non-standard product process is required for using

screw to jack up and fix products.

310 / 311

Locking Plate Series

TLK16B

TLK19A

TLK17

TLK21A

5.5

2.5

5.5

8.8

5.6 60

5.6

2.7

14 Locking Plate Series

Locking Plate Series TLK40 TLK23

TFK01

SDS-1A

4.8

◆ Anti-strike locking plate, only match with manual sliding lock.

Patented product

Product introduction is detailed on page 339

312 / 313

Y02/I、Y02/II

Y08、Y08A

Y07A/I、Y07A/II

Crescent Lock Series

Y17/II、Y17/III

◆ Left & right

◆ Gaskets are available (see page 316)

◆ Left & right

◆ Gaskets are available (see page 316)

14 Cres cent Lock Series

Crescent Lock Series

Y12/I、Y12/II

Y15/I、Y15/II

Y06A/I、Y06A/II

Y16/I、Y16/II

◆ Left & right

◆ Gaskets are available (see page 316)

◆ Left & right

◆ Gaskets are available (see page 316)

◆ Left & right

◆ Gaskets are available (see page 316)

◆ Left & right Patented product

314 / 315

Y11/I、Y11/II、Y11/III

Y10/I、Y10/II

Y04/I、Y04/II

Crescent Lock Series

◆ Left & right

Patented product

14 Cres cent Lock Series

Crescent Lock Series

Y20/I 、Y20/II

Y05A/I、Y05A/II

Y06-07-1

Y07-06-1

◆ Left & right

◆ No need to distinguish left or right type

◆ Can be used in stacks, suitable for Y06A, Y13, Y15,

Y16 series crescent locks to increase the height

◆ Can be used in stacks, suitable for Y07A、Y08 series

crescent locks to increase the height.

Patented product

316 / 317

Y05-10A

Y05-12A

Y05-13A

Y05-17A

Crescent Lock Series

Y05-18A

14 Cres cent Lock Series

Crescent Lock Series Y05-19A

Y05-20A

Y05-21

Y05-22

318 / 319

Crescent Lock Series

Y05-24

Y05-25

Y05-26

∅4.5

4530

65.5

73.5

3.3

7 13.2

1.2

11.5 21.6

Y05-23A

14 Cres cent Lock Series

Crescent Lock Series Y05-30 Y05-31 T-Y05-32 Y05-28 45

∅4.5

62.4

70.1

3.3

1.2

11.5 21.6

41.2

1.2 4

17.5 6.7

320 / 321

Crescent Lock Series

T-Y05-34

T-Y05-35

T-Y05-36

T-Y05-33 14 Cres cent Lock Series

T-ZNS001

Smart Door Lock for Profile Door

★ Note:The arrow points to the

direction of the handle,

otherwise it will affect the

normal opening

T-ZNS001 Hole opening diagram

（★ It is recommended to do sample test before batch cutouts）

Hole opening

of door lock

Hole opening

of door handle

Outdoor

◆ Left & right

◆ Opening method: fingerprint + password

+ mechanical key

◆ Working power supply: 4 pcs dry

batteries(5#)

◆ Emergency power supply: USB

emergency power supply

◆ Fingerprint storage capacity: 300 groups

◆ Fingerprint recognition type:

semiconductor

◆ Low voltage reminder: support

◆ Password digits: 6~10 digits

◆ Number of virtual passwords: 20 digits

◆ Protection level: IP53

◆ Optional colors: nano black, pearl silver,

red bronze

◆ Applicable to JMSCxx/II,T-JMSDxx/II

door lock

322 / 323

14 Part Product Introduction

1.5

2.0

2.3

1.8

K MJ15

1.5

2.3

1.4

Part Product Introduction

◆ Applicable to all kinds of profile with different standard C-groove

◆ The clamping block of sash and frame has auxiliary part of

hanging ear to make installation easy.

◆ This hinge is of high-bearing-capacity with maximun bearing

capacity 200KG (4 hinges are installed in one door sash.)

◆ 3-D adjustable function effectively reduces installation error

◆ Designed fixing screws with the profile guarantee the high

bearing capacity.

MJ20 adjust illustration

★ Note: if use the profile as above, please use ST4.8 self-tapping

screws to replace the middle fixing screws of the hinge

Door hinge MJ20

Please put the clamp into profile

groove with the direction showed

on the picture, if the profile groove

thickness is 1.4mm

T-MZS918 T-MZS920

Part Product Introduction

Bearing type series products

◆ Taking the classic streamline and simple appearance of

KinLong;

◆ The handle and base insist on using the golden ratio

configuration, while the shape specifications are increased.

◆ With the built-in bearing, the cycle life of the product is

greatly improved, far exceeding the industry standard;

◆ Energy-saving concept design to help reducing the energy

and consumption of doors and windows;

◆ Applicable to more profiles in the market;

◆ Products are no need to distinguish left and right type;

Bearing type handle T-MZS918、T-MZS920

Specification and size

324 / 325

TZS300A/II TZS310/II MJ25A

Part Product Introduction

Bearing type series products

◆ Bearing type handle, stable structure, smoothly operation and

long cycle life;

◆ Integrated handle with fork tongue or square steel;

◆ A variety of products are available;

◆ Products includes:

Sliding door handle TZS300A series, TZS301A series,

TZS302A series, TZS310 series, TZS311 series, TZS312 series

◆ Bearing type hinge, reducing the rotational friction effectively,

easily for operation;

◆ Stable structure and the cycle life far exceeds the industry

standard;

◆ Three-dimensional adjustable function, which can corrects the

installation error effectively;

◆ Products includes:

Casement door hinge MJ25A, T-ZC63, T-ZC63E

14 Part Product Introduction

Part Product Introduction ◆ Integral panel, clean appearance, stable and reliable transmission

◆ Applicable to different specifications of profiles, center distance

adjustable, adjustable range :25-33mm

◆ Damping type adjustment, easy and quick adjustment

◆ Suitable for European standard C-groove profile, clamping installation

◆ One-way transmission, stroke 32mm

◆ T-CDQ25-33/I is suitable for 7X7 spindle double-side handle

◆ T-CDQ25-33/II is suitable for 7X7 spindle single-side handle

◆ The three-wing hinge have no left and right

◆ Suitable for standard European standard C-groove profile

◆ Narrow clamping block, easy to install

◆ Hinge eccentric adjustable, quick adjustment, no need to

remove the sash; (Patented product)

◆ The maximum bearing capacity of hinge is 120Kg

Center

distance

adjustable

T-CDQ25-33 series opening diagram

(Match with MZS05, 06 and 07 series)

☆ With the side transmission rod TCG10、TCG11 to use.

Center distance adjustable transmitter

T-CDQ25-33/I, T-CDQ25-33/II

Easy to adjust three-wing hinge T-MJ112

326 / 327

Part Product Introduction

◆ Single latch design, simple and practical;

the main material of the door lock shell is high-quality zinc alloy, the surface is

electrophoresis black, wear-resistant and anti-corrosion.

◆ Cooperating with KIL series lock cylinder to realize the locking function, and

together with the door handle T-MLS05.

◆ Door handles are available in a variety of sizes and lengths can also be

customized .

◆ Suitable for C-groove, no-groove profiles;

commonly used in shopping malls, pedestrian path, unit doors and other

normally open casement doors, and occasions that require a temporary

locking function.

Door lock T-DFS32

Door handle T-MLS05 Effect diagram

14 Part Product Introduction

Part Product Introduction

Item code L

JGS-40 40

JGS-50 50

JGS-60 60

Indoor

Fastening bolt ◆ Imbed the profile cavity by rotating, improve the

strength of hinges.

◆ Guiding section is designed in the front of the bolt,

to make it easy and and precise for installing.

◆ Can meet big size profile installation requirement.

◆ Suitable for LHD/LHE series hinges.

Cutouts illustration

328 / 329

Part Product Introduction

Duplicator KMQ10 / KMQ20 / KMQ30

Door frame

Door sash

KMQ30 Series can only be used for

left and right positioning

◆ Convenient-Use design, need no screws to fix, and it

can be customized.

◆ Suitable to all kinds of profiles, greatly improve the

hinge installation efficiency, so it provides an excellent

solution to cover the low-efficiency.

◆ KMQ10 is suitable for LHD25, LHE25 hinges.

◆ KMQ20is suitable for WK-D、WD-E hinges.

◆ KMQ30is suitable for LHD55、LHD60、LHD63、LHE63、

T-ZC63、T-ZC63E、LHD93A、SHD63、T-LWD63、

T-SWD63、T-SWD80、

Note: The duplicator needs to be customized according to

the selected hinges and profiles.

14 Part Product Introduction

Part Product Introduction

Hinge T-LWD63、T-SWD63、T-SWD80

Three-wing hinge T-SWD63、T-SWD80 hole cuts diagram

Two-wing hinge T-LWD63 hole cuts diagram

Three-wing hinge T-SWD63、T-SWD80 adjustment diagram

Two-wing hinge T-LWD63 adjustment diagram

◆ It is suitable for casement doors with aluminum alloy profiles

and aluminum -wood composite profiles that the frame and

sash profiles are on the same plane.

◆ The hinge can be adjusted in two ways, the waist hole has a

large adjustment of ± 5mm, and the bushing has an adjustment

of ± 2mm

◆ In order to obtain the best installation effect of the hinge, it is

recommended to use the touch device KMQ30 for installation

and opening.

◆ The hinge provides three fixing methods:

Use wood screws

Use fastening bolts

Use bar nuts to secure

◆ The maximum load-bearing capacity of the hinge is 150KG

330 / 331

Part Product Introduction

Fixing method 1: wood screws（T-MLD01-50）

Fixing method 2: fixing bolts（JGS-40/JGS-50/JGS-60）

Fixing method 3: bar nuts（LHD-12A、LH-9B）

Drilling diagram

X is the hole opening depth of Φ14 circular hole

when the thickness of the aluminum alloy profile

is less then 12mm, the value of X is 12 When

the thickness of the aluminum alloy profile is

more then 12mm, the value of X is the thickness

of aluminum alloy profile Indoor

Indoor

Note: Put the bar nut before the profile assembling

Indoor M8

Drilling diagram 14 Part Product Introduction

Part Product Introduction TLS22、TLS32 Series sliding lock

TLS22H

TLS22HS

TLS22L02

TLS32L

TLS32HS

TLS32H

TLS32

TLS22

Various series to meet different requirement.

All series products for selection

◆ TLS22 series rounded appearance;

◆ TLS32 series square appearance;

◆ Manual, automatic, double-sided, with-handle, with-lock;

◆ Complete series of products, different forms of products can be

selected according to requirement;

Comprehensive upgrade, wider application

Multiple optimizations, better adaptability

◆ TLS22 and TLS32 series products using the same hole cuts with TLS12 series;

◆ Stainless steel clamping block, stable clamping, large hole cuts design for higher applicability;

◆ New lock hook, no screw protrusion, less cavity space needed;

More cost-effective

With a better using experience

◆ The shell is widened to 26mm, which can avoid the extra exposure

of the hole cuts on the profile surface effectively;

◆ The lock hook is adjustable, and the adjustment amount is ±3mm;

332 / 333

Part Product Introduction

Sliding lock series

Drilling Installation diagram

for TLS22/TLS32/TLS12/TLS16

Note: Please install according to the direction shown in the figure,

upside down installation will affect the service life

Installation steps <2>:

(1) Toggle the switch chute down to

open the sliding lock.

(2) Prepare the sliding profile with the

hole in advance,and place the sliding

lock sideways,then put it into the hole

naturally

Installation steps <3>:

(1) Move the sliding lock up and down

to clamp the positioning block to the

wall of the profile.

(2) Clamping the profile with the block

at the upper and lower end of the

sliding lock and the outer cover to

fix the M5 countersunk screw on the

lower side of the sliding lock.

Installation steps <4>:

(1) Toggle the switch chute up to

close the sliding lock.

(2) Fix the M5 cross countersunk

screws on the upper side of

the sliding lock.

Installation steps <5>:

(1) Adjust the front and rear position

of the lock hook to achieve a

better fit between the

(2) The installation is complete.

3 4 5

Noted: 'L' is decided by the profile 1

Installation steps <1>:

(1) According to actual application requirements to cut the holes in the sliding profile.

(2) Install the fitted lock hook on the sliding lock.

(3) Use an Allen key to adjust the end of the hook and switch cover to a flat surface.

(That is, the C and D surface is flush.)

(4) Loosen the screws of the two clamping blocks.

Positioning boss

Sash

Lock hook

Sash

Sash Sash

Promp block

(red)

M5 Cross M5 Cross

Countersunk

head screw

Countersunk

head screw

Countersunk

head screw

Countersunk

head screw

Clamping block

Promp block

(green)

A direction

B direction

A direction

B direction 14 Part Product Introduction

Auxiliary handle installation instructions

Installation instructions for the middle profile

of the four-sash sliding

Installation instructions for the position of the

two-sash sliding door side profile

T-DGS01 T-DGS02

T-DGS01、T-DGS02 Hole

cuts diagram

T-DGS01W、T-DGS01H、T-DGS02W、

T-DGS02 Hhole cuts diagram

Part Product Introduction

Single hook lock T-DGS01 series, T-DGS02 series

（★ It is recommended to carry out the first

sample test before opening holes）

Drilling installation diagram

◆ Installed on the outer surface of the profile, not limited by the

size of the internal cavity,

◆ A wider adaptability.

Anti-falling buckle cover design, screws will not be exposed.

◆ The lock hook is adjustable, and the adjustment amount is

±2.5mm.

◆ This series offers a variety of styles to choose from:

◆ T-DGS01, T-DGS02 outdoor with lock cylinder, can be

operated indoors and outdoors;

◆ T-DGS01W and T-DGS02W have no lock cylinder and can

only be operated indoors;

◆ T-DGS01H and T-DGS02H are auxiliary handles for split fans;

◆ The product needs to be used with the hook receiver T-GSK01.

334 / 335

Part Product Introduction

★ Double hook lock-in

the open state

★ Outside the handle-in a state

where the key can be pulled out

★ State of flat pin

T-SGS25 &T-MLS04

cutouts diagram

T-SGS25 &T-MLS04

installation diagram

T-SGS25&T-MLS04

Installation diagram

Hole size requirements

25.5 15

200

19 100

25.5

Three-piece double hook lock

Door handle T-MLS04

Double hook lock T-SGS25

Cover plate T-GMB215

◆ It is made of high-quality aluminum alloy die-casting, and the

screw fixing place is \"anti-falling buckle cover\".

◆ The double hook lock is equipped with an anti-misoperation

device, which effectively protects the profile and hardware

accessories. the shell is made of high-quality zinc alloy and the

surface is electrophoretically treated. the lock hook is formed of

304 powder metallurgy, which has higher strength and stronger locking.

◆ The frame panel is made of high-quality 304 material and the

surface is brushed.

Note:The picture shows the handle is right-handed,

and the left-hand installation is the same

（★ It is recommended to carry out the first

sample test before opening holes）

T-MLS04

Outdoor side

(Right type)

T-SGS25

Diagonal arc

face up

ST4.2

T-MLS04

2-M5

Indoor side (Right type)

14 Part Product Introduction

Part Product Introduction T-SGS14/II-W

T-SGS14/II

T-SGS14/I、T-SGS14/II

T-MLS03

TILAB/T

T-KMB201

T-SGS14/I-C

T-SGS14/I

4-Piece double hook lock

◆ Super narrow 14mm center distance

◆ Anti-mis design, safe and reliable

◆ T-SGS14/I match with transmission rod to be multi lock point locking

◆ T-SGS14/II used for single point lock form

◆ T-SGS14/I Suitable for 2001 profiles

◆ T-SGS14/II Suitable for 2001 profiles and european standard

15 / 20C groove profiles

◆ T-SGS14/I-C Suitable for european standard 15 / 20C

groove profiles

◆ T-SGS14/II-W Suitable for non-groove profiles

◆ Only used with KIN LONG TILAB/T lock cylinder series

◆ Ergonomic design handle, comfortable grip, durable

◆ Accurate wrench reset and simple operation

◆ Can be customized for handle use

◆ Changing the position of the lock cylinder can be applied to the

swing door system and used with the transmitter.

◆ Brass material, surface plating.

◆ Corrosion resistance and superior performance

◆ Double hook lock T-SGS14 series special lock cylinder

◆ Waist-shaped holes fixed to compensate for machining errors,

◆ Zinc alloy material, surface electrophoresis treatment

◆ T-SGS14 series matched accessory

336 / 337

Part Product Introduction

△! △!

When the double hook lock tongue is in the

extended state, it is forbidden to close the door

leaf. If you encounter the extended state of the

hook and tongue, please pull the lever of the

handle in time. There are two situations to retract

the hook tongue to the hook lock panel:

1. Lift the lever of the handle directly and turn it

90 degrees to retract the hook.

2. Lift the lever of the handle directly, but it

cannot be turned 90 degrees, which means

that the lock core needs to turn the lock core

to cancel the antilock when it twists the

internal components to the \"pretend anti-lock

state\". achieve hook and tongue retraction

Before closing the door leaf, do not try to lift

or depress the lever when the tongue of the

double hook lock is in the retracted state.

Initial state (factory state): the hook tongue

retracts into the hook lock panel, and the

anti-error block is applied to the hook

lock panel. when the anti-error block is

compressed by the frame panel, the handle

can be operated

（★ It is recommended to carry out the first sample test before opening holes）

( ★ It is recommended to carry out the first sample test before opening holes)

T-SGS 14/II-W Drilling installation diagram

T-SGS14/I T-SGS14/I-C T-SGS14/II Drilling installation diagram

Cautious

★ Misoperation diagram 1 ★ Misoperation diagram 2

14 Part Product Introduction

Part Product Introduction

Handle TKS05

Sliding handle TKS01

(Matching crescent lock series.)

Sliding handle TKS02

(Off matching TLS12、TLS16、TLS22 series)

Sliding handle TKS03A

(Off matching TLS21、TLS23 series)

Sliding handle TKS04

Drilling installation diagram of TKS01

◆ Self - tapping screw fixed, easy and quick installation.

◆ Auxiliary with small handle, widely used.

◆ Length can be customized.

◆ The above 3 types of sliding handles adopt clip-on

installation design and there is no exposed screws.

◆ Push the handle clip into the hole of the profile to finish it.

( ★ Adviseexperimental installationbefore batch opening)

◆ This product has simple appearance

and no exposed screws

◆ Press the handle into the hole of the profile.

◆ Drilling size:

184X20(Height*width, mm)

Note: The end with clamping block

should facing dowm.

Note: The end with clamping block

should facing dowm.

Note: The end with clamping block

should facing dowm.

The drilling size is determined

by the wall thickness of the profile：

t=1.0~1.4 drilling size 83X20 (Height*width, mm)

t=1.8~2.0 drilling size 83 X21.5 (Height*width, mm)

( ★ It's recommended to test sample before batch drilling )

338 / 339

Anti collision latch TFK01 (patented product)

Sliding handles TZS118, TZS120

Limiting rack TZS23-08

Push-pull system·Anti misoperation solution

(National patent)

Let the collision not

be careful

Part Product Introduction

◆ Screw cap design,no exposed

screws,and integrated appearance.

◆ It can be used directly with the

transmission rod,or it can be used

the 7*7 spindle and transmitter,

with a variety of functions.

◆ Simple structure and convenient

installation.

◆ For TZS series handle limit, limit the

handle rotation angle range to 0~90°

14 Part Product Introduction

Part Product Introduction Locator T-DM01

The installation diagram of the locator

◆ Simple appearance

◆ Pedal positioning

◆ Pedal reset

◆ The part that rub against the floor are made of rubber to effectively protect the floor surface

◆ Positioning requirements can be achieved at any angle.

340 / 341

III、Roller Hardware Series

The Selection of Roller Hardware

Roller and section drawing of profile

For sliding windows and doors, refer to several important diameters as the right chart shown to select the suitable

rollers.

◆ Main parameter of profiles：

◆ Parameter of the selected roller：

◆ The parameter relations:

★ ZG=B (Rollor overall height equals the height of the profile to the sliding rail after assembly.

★ K=A-0.5~1mm(0.5~1mm gap should be reserved between the roller and profile for installation.

★ G=ZG-GC (When placing order, subject to the outer cover height G.)

★ R≥D（Select roller which the wheel equal or little bigger than the track）

★ Maximum load bearing of roller ≤sash dead weight (glass+profile+other accessories)×1.4 （safety factor)

◆ Roller safety bearing ≥ fan weight (glass + profile + other accessories)* safety factor value γ

Safety factor γ determined according to the influence of factors such as construction environment and installation on

the bearing capacity of the Roller (reference value 1.4).

Not recommended for use at load critical points or beyond, The operating force of the active sash and the cycle life of

the roller are related to the selection of the roller’s load-bearing.

◆ It is recommended that the ratio of width to height of sliding doors and windows ≥ 1/3.

◆ When you install the roller on site, please clean the rail in case the mortar or anything else to affect the open and close of

the door and window.

◆ The roller can improve the performance of sliding windows and doors, such as sag and gab which was resulted in long-term

using or incorrect installation.

◆ Do not store the product in the open air before installation, avoid exposure to the sun and rain.

◆ The bearing capacity of all roller in this catalogue is safety bearing capacity.

◆ When select the roller, please follow the technical proposals to arrange samples for trial installation, then confirm.

◆ Commonly used fastening screws are ST4.2 pan head self-tapping screws/ST4.2 pan head self-drilling & tapping screws.

◆ In no event shall KIN LONG takes the quality responsibility for the products beyond the limit of use or mixing use with other

products uncommitted.

◆ We reserve the right to update products and improve technique

1、Roller selection

2、Roller bearing capacity

3、The using and maintenance for roller

4、Note:

A: Width of profile cavity

B: Height of the profile to sliding rail after assembly.

C: Overlap of sash and frame, (usually 6~10mm)

D: Shape of the sliding rail, (curve or angle).

K: Width of the roller

G: Height of the roller outer cover

ZG: Height of overall roller

GC: Amount after the overall height minus outer

cover height

R: Shape of the bearing.

342 / 343

15 Roller Series

CL11 G27K29C6X9 R2.75

Commonly used roller series

According to the specifications of the sliding doors & windows size bearing demand for rollers, products are divided into

different bearing level, minimum weight 25 kg, maximum load bearing 400 kg. rollers' size can be adjusted according to the

customers's sliding profiles cavity size correspondingly, realizes the roller and profile perfect match. Wheels' size and shape also

can be selected according to the application of the sliding doors & windows track.

Wheel shape

Code instruction

Code rule

■CL

■ML

■CLS

■DXL

■JLZ

In order to facilitate the search, roller products are sorted in accordance

with the number of wheels load-bearing fixed way.

Arc shape Angle shape

window roller

Door roller

screen window roller

guide roller

Metal roller

Commonly Used Roller Series

product

model

Distinguished

symbol

of customized

parameter

Customize

product

dimension

parameter

Customized

wheel shape

parameters

Material: high quality wear-resistant engineering plastics

Wheel shape can be customized according to the track(It is recommended

to use a small arc, such as R2.75, which can make the opening fan run

more smoothly)

For special wheel shape requirements, please communicate and

confirm with technical personnel of the Kin Long

■

Commonly Used Roller Series CCL60G11K16 CCL60G23K20 CCL60G27K14.8 CL20 ◆ Bearing capacity: 25kg/2 rollers

◆ Bearing capacity: 30kg/2 rollers

◆ Bearing capacity: 35kg/2 rollers K=14~24mm

★

Aluminum alloy pulleys with ★ are preferred, as they have fast delivery cycles and a wide range of applicable profiles.

Customized for India

344 / 345

Commonly Used Roller Series

CL60G25K17

CCL60G29K18.8

CL60G27K17

CL60G25K19

◆ Bearing capacity: 40kg/2 rollers

15 Roller Series

Commonly Used Roller Series CCLD008

CL60G26K21.5

CL60G32.5K19

±5

140°

17.3

53.5

19.3

18.3

4041

Width K(mm) 20.5 21

◆ Bearing capacity: 40kg/2 rollers

◆ The standard specifications are as follows:

CCLD010

±2.5

49.2

15.7

34.3 31.5

8.4

143°

12.5

◆ Bearing capacity: 40kg/2 rollers

◆ Bearing capacity: 40kg/2 rollers Customized for Chile

Customized for Thailand

快速跳转到指定页