B-Line Series Strut Systems Catalog - 电子画册在线预览、各类电子画册在线制作-云展网平台

B438

Pipe Support Bracket

• Standard finishes: ZN, GRN

• Material: ASTM A36

• Wt./C 132 Lbs. (59.9 kg)

B439

Pipe Support Bracket

• Standard finishes: ZN, GRN

• Wt./C 88 Lbs. (39.9 kg)

B411 Series

Ladder Rungs

• Standard finishes: ZN, GRN

B587-1/2, 3/4 & 1

Pipe Coupling Fitting

• Safety Factor of 2.5

• Standard finishes: ZN, GRN

B381-B385

Wall Ladder Brackets

• Standard finishes: ZN, GRN

41/4”

(107.9)

4”

(101.6)

3/8”

(9.5)

31/2”

(88.9)

53/8”

(136.5)

1/4”

(6.3)

13/16”

(20.6)

13/16”

(20.6)

13/16”

(20.6)

4”

(101.6)

Part A Wt./C

No. In. mm Lbs. kg

B411-12 12” (304.8) 176 (79.8)

B411-15 15” (381.0) 202 (91.6)

B411-18 18” (457.2) 234 (106.1)

Part AB C Wt./C

No. In. mm In. mm In. mm Lbs. kg

B381 23/8” (60.3) 6” (152.4) 75/8” (193.7) 110 (49.9)

B382 43/8” (111.1) 8” (203.2) 95/8” (244.5) 164 (74.4)

B383 63/8” (161.9) 10” (254.0) 115/8” (295.3) 200 (90.7)

B384 83/8” (212.7) 12” (304.8) 135/8” (346.1) 253 (114.7)

B385 103/8” (263.5) 14” (355.6) 155/8” (396.9) 318 (144.2)

B C

2” I.D.

(50.8)

Part For Wt./C Design

No. Pipe Size Load

In. mm Lbs. kg Lbs. kN

B587-1/2 1/2” (15) 77 (34.9) 1000 (4.45)

B587-3/4 3/4” (20) 84 (38.1) 1400 (6.23)

B587-1 1” (25) 105 (47.6) 1900 (8.45)

211/16”

(68.2)

Design Load

Strut Fittings

Reference page 106 for general fitting and standard finish specifications.

Miscellaneous Fittings

4Dimension compatible fitting

149 B-Line series strut systems Eaton

B350

Trolley Beam Joint Support

• Design Load 1200 Lbs. (5.34 kN)

• Use 3/8” x 3” bolts in side hole to clamp

strut together (not included)

• Standard finishes: ZN, GRN

• Wt./C 233 Lbs. (105.7 kg)

B349

Trolley Beam Support

• Design Load 1200 Lbs. (5.34 kN)

• Safety Factor of 2.5

• Use 3/8” x 3” bolts in side hole to clamp

strut together (not included)

• Standard finishes: ZN, GRN

• Wt./C 107 Lbs. (48.5 kg)

B560

45° Stair Support

• Standard finishes: ZN, GRN

• Wt./C 220 Lbs. (99.8 kg)

B562

371/2° Stair Support

• Standard finishes: ZN, GRN

• Wt./C 206 Lbs. (93.4 kg)

315/16”

(100.0)

13/32”

(27.8) 21/32”

(16.7) 121/32”

(42.0)

315/16” 3 (100.0) 1/2”

(88.9)

31/2”

31 (88.9) /2”

(88.9)

31/2”

(88.9)

31/2”

(88.9)

33/4”

(95.2)

33/4”

(95.2)

45° 371/2°

7/16”(11.1) Dia.

2 Holes

7/16”(11.1) Dia.

2 Holes

9/16”(14.3) Dia.

1 Hole

9/16”(14.3) Dia.

1 Hole

21/8”

(54.0)

15/8”

(41.3)

17/8”

(47.6)

17/8”

(47.6)

121/32”

(42.0)

11/32”

(26.2)

21/8”

(54.0)

11/32”

(26.2)

87/8”

(225.4)

87/8”

(225.4)

11/16”

(27.0)

11/16”

(27.0)

13/16”

(20.6)

13/16”

(20.6)

B613

Column Support for B22

• Design Load 800 Lbs. (3.56 kN) Slip

with Safety Factor of 3

• Use with B22 and B24 Channel

• Setscrews to be torqued to 19 ft./Lbs

• Sold in pairs

• Standard finishes: ZN, GRN, HDG

• Wt./C 100 Lbs. (45.3 kg)

B613A

Column Support for B52

• Design Load 800 Lbs. (3.56 kN) Slip

with Safety Factor of 3

• Use with B52 and B54 Channel

• Setscrews to be torqued to 19 ft./Lbs

• Sold in pairs

• Standard finishes: ZN, GRN, HDG

• Wt./C 100 Lbs. (45.3 kg)

15/8”

(41.3) 15/8”

(41.3)

31/2”

(88.9)

31/2”

(88.9)

3/8” x 2”

Cone Point

Setscrews

3/8” x 2”

Cone Point

Setscrews

B614

Column Support for B22

• Quick installation (one bolt to tighten)

• Design Load 800 Lbs. (3.56 kN) Slip

with Safety Factor of 3

• Use with B22 and B24 Channel

• Sold in pairs

• Standard finish: ZN

• Wt./C 50 Lbs. (22.6 kg)

Strut Fittings

Reference page 106 for general fitting and standard finish specifications.

Miscellaneous Fittings

B-Line series strut systems 150 Eaton

B376

Four Bearing Trolley

Assembly

• Safety Factor of 2.5

• Stainless steel ball bearings

• Not for continuous cycling

applications

• Standard finishes: ZN

• Wt./C 110 Lbs. (49.9 kg)

B377

Two Bearing Trolley Assembly

• Safety Factor of 2.5

• Stainless steel ball bearings

• Not for continuous cycling

applications

• Standard finishes: ZN

• Wt./C 48 Lbs. (21.8 kg)

B477

Two Bearing Light Duty

Trolley Assembly

• Design Load 50 Lbs. (.22 kN)

• Safety Factor of 2.5

• Stainless steel ball bearings

• Not for continuous cycling applications

• Material:12 Gauge (2.6) ASTM A1011

33,000 PSI min. yield

• Standard finishes: ZN

• Wt./C 30 Lbs. (13.6 kg)

B477P

With Plastic

Bearings

• Design Load

10 Lbs. (.045 kN)

B477H

Two Bearing Light Duty

Trolley Assembly with Eye Hook

• Design Load 50 Lbs. (.22 kN)

• Safety Factor of 2.5

• Stainless steel ball bearings

• Not for continuous cycling applications

• Material:12 Gauge (2.6) ASTM A1011

33,000 PSI min. yield

• Standard finishes: ZN

• Wt./C 36 Lbs. (16.3 kg)

B477HP

With Plastic

Bearings

• Design Load

10 Lbs. (.045 kN)

B478H

Four Bearing Light Duty

Trolley Assembly with Eye Hook

• Design Load 100 Lbs. (.44 kN)

• Safety Factor of 2.5

• Stainless steel ball bearings

• Not for continuous cycling applications

• Material:12 Gauge (2.6) ASTM A1011

33,000 PSI min. yield

• Standard finishes: ZN

• Wt./C 72 Lbs. (32.6 kg)

B478HP

With Plastic

Bearings

• Design Load

20 Lbs. (.090 kN)

B478

Four Bearing Light Duty

Trolley Assembly

• Design Load 100 Lbs. (.44 kN)

• Safety Factor of 2.5

• Stainless steel ball bearings

• Not for continuous cycling applications

• Material:12 Gauge (2.6) ASTM A1011

33,000 PSI min. yield

• Standard finishes: ZN

• Wt./C 68 Lbs. (30.8 kg)

B478P

With Plastic

Bearings

• Design Load

20 Lbs. (.090 kN)

13/16”

(20.6)

13/16”

(20.6)

5/8”

(15.9)

33/8”

(85.8)

33/8”

(85.8)

35/16”

(84.1) 15/16”

(33.3)

15/16”

(33.3)

11/8” (28.6)

Bearing O.D.

9/32” (7.1)

Dia. Hole

11/8” (28.6)

Bearing O.D.

3”

(76.2)

3”

(76.2) 2”

(50.8)

3/4”

(19.0)

3/4”

11/4” (19.0)

(31.7)

3/4” I.D

(19.0)

3/4” I.D

(19.0)

1/4” (6.3)

Eye Rod

1/4” (6.3)

Eye Rod

Design Load in B22

Lbs. kN RPM

300 (1.33) @600

450 (2.00) @300

600 (2.67) @100

Design Load in B22

Lbs. kN RPM

150 (.67) @600

225 (1.00) @300

437 (1.94) @100

15/16”

(23.5)

11/32”

(8.7)

11/8” (28.6)

11/4”

(31.7)

5/8”

(15.9)

11/32”

(8.7)

11/8” (28.6)

11/4”

(31.7)

13/4”

(44.4)

315/16”

(100.0)

Design Load

Design Load Design Load

11/4”

(31.7)

9/32” x 9/16” Slot-(2)

(7.1) (14.3)

9/32” (7.1)

Dia. Hole

Strut Fittings

Reference page 106 for general fitting and standard finish specifications.

Miscellaneous Fittings

4Dimension compatible fitting

151 B-Line series strut systems Eaton

B203-B206 & B220-B223

Channel End Caps Type X

• Material: ASTM A1011 CS Type B

• Standard finishes: ZN, GRN, HDG, SS4, AL

B283-B286

Channel End Caps

• Material: ASTM A1011 33,000 PSI min. yield

• Standard finishes: ZN, GRN

B287 & B288

Channel End Caps

• Material: ASTM A1011 33,000 PSI min. yield

• Standard finishes: ZN, GRN

B3322, B3332, B3342, B3352

Anchor End Caps Type Y

• Material: ASTM A1011 33,000 PSI min. yield

• Standard finishes: ZN

119/32”

(40.5)

119/32”

(40.5)

25/8”

(66.7)

113/16”

(46.0)

Part Use A Wt./C

No. With In. mm Lbs. kg

B203 B42 1.015 (25.8) 6 (2.7)

B204 B54 .827 (21.0) 5 (2.2)

B205 B22 1.640 (41.6) 10 (4.5)

B206 B32 1.390 (35.3) 8 (3.6)

B220 B52 .827 (21.0) 4 (1.8)

B221 B12 2.452 (62.3) 15 (6.8)

B222 B11 3.265 (82.9) 20 (9.1)

B223 B24 1.640 (41.6) 10 (4.5)

Part A B Wt./C

No. Use With In. mm In. mm Lbs. kg

B283 B52 119/32” (40.5) 25/32” (19.8) 6 (2.7)

B284 B54 & B56 119/32” (40.5) 25/32” (19.8) 6 (2.7)

B285 B22 119/32” (40.5) 119/32”(40.5) 13 (5.9)

B286 B24 & B26 119/32” (40.5) 119/32”(40.5) 14 (6.3)

Part Use Wt./C

No. With Lbs. kg

B287 B22 13 (5.9)

B288 B24 14 (6.3)

Part A B Wt./C

No. Use With In. mm In. mm Lbs. kg

B3322 B22I 1.270 (32.2) 13/16” (30.2) 15 (6.8)

B3332 B32I 1.000 (25.4) 13/16” (30.2) 15 (6.8)

B3342 B42I .645 (16.4) 11/4” (31.8) 15 (6.8)

B3352 B52I .460 (11.7) 15/16” (33.3) 15 (6.8)

3/8” (9.5)

Dia. Hole

B822

Plastic End Cap for B22 & B24

• Material: Polyvinyl Chloride (PVC/Vinyl)

• Withstands intermittent temperatures

up to 350°F (177°C) and 200°F (93°C)

continuous

• Wt./C 3 Lbs. (1.3 kg)

• Available in colors: White (W),

Yellow (Y), Black (BLK), Gray (GRY),

Green (GRN)

B822A

Plastic End Cap for B22A & B11

• Material: Polyvinyl Chloride (PVC/Vinyl)

• Withstands intermittent temperatures

up to 350°F (177°C) and 200°F (93°C)

continuous

• Wt./C 5 Lbs. (2.2 kg)

• Available in colors: White (W),

Yellow (Y), Black (BLK), Gray (GRY),

Green (GRN)

B852

Plastic End Cap for B52

• Material: Polyvinyl Chloride (PVC/Vinyl)

• Withstands intermittent temperatures

up to 350°F (177°C) and 200°F (93°C)

continuous

• Wt./C 2.5 Lbs. (1.1 kg)

• Available in colors: White (W),

Yellow (Y), Black (BLK), Gray (GRY),

Green (GRN)

11/4”

(31.7)

11/4”

(31.7)

11/4”

(31.7)

Strut Fittings

Reference page 106 for general fitting and standard finish specifications.

Miscellaneous Fittings

B-Line series strut systems 152 Eaton

B823

Profile End Caps

• Material: Polyvinyl Chloride (PVC/Vinyl)

• Withstands intermittent temperatures up to

350°F (177°C) and 200°F (93°C) continuous

• Available in colors: White (W),

Yellow (Y), Black (BLK), Gray (GRY),

Green (GRN)

B408SLBVNS Series

Stand-Off Brackets

• Material: 1/4” (6.3)

• Standard Finishes: HDG, ZN, GRN

• For pipe or rigid conduit sizes

of 11/2” (40) and 2” (50) use with

B501 Series ‘U’-Bolts (see page 53)

• For strut channels 15/8” (41.3) wide

use with B500 Series Square ‘U’-Bolts

(see page 53)

• Hardware is not included

B825

Plastic End Caps

• Material: Polyurethane

• Available in colors: Gray (GRY), Green (GRN)

Approx. 3/4” deep

(19.0)

(6) Slots

7/16” (11.1) x 11/8” (28.6)

Fits Wt./C

Part No. Channel Sizes Lbs. kg

B823-22A B22A, B24A, B26A 6.9 (3.1)

B823-22 B22, B24, B26 4.1 (1.8)

B823-42 B42 3.8 (1.7)

B823-52 B52, B54, B56 3.5 (1.6)

Fits Wt./C

Part No. Channel Sizes Lbs. kg

B825-22 B22 & B24 2.0 (0.9)

B825-52 B52 & B54 1.0 (0.4)

Strut Fittings

Part A Wt./C

No. In. (mm) Lbs. kg

B408SLBVNS 31/2” (88.9) 189 (85.7)

B408SLBVNS1 3” (76.2) 220 (99.8)

B408SLBVNS2 2” (50.8) 236 (107.0)

1/2”

(12.7)

15/16”

(33.3)

11/16” (27.0)

21/8” (53.5)

21/4” (57.1)

11/8” (28.6)

23/16” (55.6)

11/16” (27.0)

21/4” (57.1)

43/8” (111.1)

45/8” (117.5)

Reference page 106 for general fitting and standard finish specifications.

Miscellaneous Fittings

153 B-Line series strut systems Eaton

Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or

welding. A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are designed for use

with our channels and offer many installation advantages.

Materials & Finishes (Unless otherwise noted)

Pipe clamps, pipe hangers, beam clamps,

brackets, and rollers are made from low carbon

steel strips, plates or rod unless noted.

Note: A minimum order may apply on

special material and finishes.

Load Data

The load data published includes a safety factor

of 5.0 unless noted (safety factor = ratio of

ultimate load to the design load).

Recommended Torque For Setscrews

(unless noted)

See chart on page 106 for recommended

torquing of bolts (not setscrews).

Metric

Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

Setscrew Size 1/4”-20 3/8”-16 1/2”-13

Foot/Lbs. 4 5 11

Nm 5 7 15

Setscrew Size 5/8”-11 3/4”-10

Foot/Lbs. 21 34

Nm 28 46

Beam Clamps

Finish

Code Finish Specification

PLN Plain ASTM A1018 Gr. 33

ASTM A1011 SS Grade 33

ZN Electro-Plated Zinc ASTM B633 SC3 Type III

or ASTM A653

GRN DURA GREEN™

– Malleable Iron ASTM A47 Gr. 32510

HDG Hot-Dipped Galvanized ASTM A123

CZ Chromium Zinc ASTM F1136 Gr. 3

SS4 Stainless Steel Type 304 ASTM A240

SS6 Stainless Steel Type 316 ASTM A240

AL Aluminum ASTM B209

B-Line series strut systems 154 Eaton

B3362 thru B3365

Retaining Strap

• † When ordering specify L (Length) as a

suffix to the part number

• Material: 14 gauge (1.9)

• Standard finishes: GALV, SS4

B3036L

C-Clamp with Locknut

• Safety Factor of 5

• When Retaining Strap is required, order B3363 or B3364 separately

• Setscrew and locknut included

• Material: Malleable iron

• Standard finishes: ZN, PLN

Part Number Rod

With Size BC DE Design Load Wt./C

Locknut A In. mm In. mm In. mm In. mm Lbs. kN Lbs. kg

B351L-3/8 * 3/8”-16 23/8” (60.3) 23/8” (60.3) 3/4” (19.0) 13/8” (34.9) 230 (1.03) 41 (18.6)

B351L-1/2 * 1/2”-13 23/8” (60.3) 23/8” (60.3) 3/4” (19.0) 13/8” (34.9) 380 (1.71) 41 (18.6)

B351L-5/8 * 5/8”11 23/8” (60.3) 21/4” (57.1) 3/4” (19.0) 13/8” (34.9) 550 (2.47) 60 (27.2)

B351L-3/4 * 3/4”-10 23/8” (60.3) 31/4” (82.5) 3/4” (19.0) 13/8” (34.9) 630 (2.83) 71 (32.2)

B351L-7/8 7/8”-9 3” (76.2) 31/4” (82.5) 1” (25.4) 17/8” (47.6) 1200 (5.34) 184 (83.4)

Wt./C for Length L of

Part No. 6” (152.4) 8” (203.2) 10” (254.0) 12” (304.8) A B For Use With

Lbs. kg Lbs. kg Lbs. kg Lbs. kg In. mm In. mm

B3362† 17 (7.7) 24 (10.9) 31 (14.0) 38 (17.2) 11/4” (31.7) 7/16” (11.1) B351-3/8 & 1/2

B3363† 16 (7.2) 23 (10.4) 30 (13.6) 37 (16.8) 11/4” (31.7) 5/8” (15.9) B351-5/8 & 3/4 B3036-3/8 & 1/2

B3364† 16 (7.2) 23 (10.4) 30 (13.6) 37 (16.8) 11/4” (31.7) 11/16” (17.4) B3036-5/8 & 3/4

B3365† 21 (9.5) 29 (13.1) 37 (16.8) 46 (20.8) 11/2” (38.1) 3/4” (19.0) B351-7/8

Part Number Rod

With Size B C Design Load Wt./C

Locknut A In. mm In. mm Lbs. kN Lbs. kg

B3036L-3/8 3/8”-16 13/4” (44.4) 13/4” (44.4) 300 (0.89) 29 (13.1)

B3036L-1/2 1/2”-13 13/4” (44.4) 13/4” (44.4) 380 (1.69) 28 (12.7)

B3036L-5/8 5/8”-11 2” (50.8) 17/8” (47.6) 530 (2.36) 55 (24.9)

B3036L-3/4 3/4”-10 2” (50.8) 2” (50.8) 530 (2.36) 72 (32.6)

Rod Size

* 3/8 Thru 3/4

Sizes Only

B351L

Steel C-Clamp with Locknut

• Safety Factor of 5

• Setscrew and locknut included

• When Retaining Strap is required, order B3362, B3363

or B3365 separately

• Standard finishes: ZN, SS4, PLN

Rod Size

3/4”

(19.0)

3/4” (19.0)

Max.

Flange

Thickness

† See note above.

Max. Flange

Thickness

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

155 B-Line series strut systems Eaton

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

Throat

Opening

Rod

Size

B3033

Reversible Wide Jaw Wedge C-Clamp

(Malleable Iron)

• Safety Factor of 5

• Setscrew and locknut included

• Material: Malleable iron

• Standard finishes: HDG with ZN hardware, PLN

B3034

Wedge C-Clamp

• Safety Factor of 5 Note:

• 3/4” (19.0) Max. flange thickness 3/8” & 1/2” Sizes

• Setscrew and locknut included Are Reversible

• Material: Malleable iron Style

• Standard finishes: HDG with ZN hardware, PLN

Throat Openings

11/4” (31.7) For

3/8 & 1/2 Sizes

15/16” (33.3) For

5/8 & 3/4 Sizes

3/4” (19.0)

Max.

Flange

Thickness

Rod

Size

Rod B CD Design Load Wt./C UL Max.

Part No. Size Pipe Size

A In. mm In. mm In. mm Lbs. kN Lbs. kg In. mm

B3033-3/8 3/8”-16 21/4” (57.1) 2” (50.8) 11/8” (28.6) 500 (2.22) 46 (20.8) 4” (100)

B3033-1/2 1/2”-13 25/16” (58.7) 23/16” (55.5) 11/4” (31.7) 810 (3.60) 64 (29.0) 8” (200)

B3033-5/8 5/8”-11 25/8” (66.7) 21/2” (63.5) 13/8” (34.9) 1000 (4.48) 116 (52.6) 8” (200)

B3033-3/4 3/4”-10 211/16” (68.3) 21/2” (63.5) 17/16” (36.5) 1400 (6.22) 140 (63.5) 10” (250)

* 3/8 & 1/2 Sizes Only

Rod B CD Design Load Wt./C UL Max.

Part No. Size Pipe Size

A In. mm In. mm In. mm Lbs. kN Lbs. kg In. mm

B3034-3/8* 3/8”-16 15/8” (41.3) 2” (50.8) 7/8” (22.2) 560 (2.49) 54 (24.5) 4” (100)

B3034-1/2* 1/2”-13 113/16” (46.0) 23/16” (55.5) 13/16” (30.2) 810 (3.60) 51 (23.1) 8” (200)

B3034-5/8 5/8”-11 13/4” (44.5) 21/8” (54.0) 11/8” (28.6) 1000 (4.48) 70 (31.7) -- --

B3034-3/4 3/4”-10 2” (50.8) 21/4” (57.2 11/8” (28.6) 1500 (6.67) 98 (44.4) -- --

Fig. 69 (Formally B-Line B3367)

Retaining Strap

• Specify ‘L’ lengths required

• Minimum recommended return on strap is 1” (25.4)

• Material: Pre-Galvanized Steel

• Standard finishes: GALV

Hole Dia. D For Use Wt./C**

Part No. In. mm Lbs. kg

69-3/8-L 7/16” (30.1) B3033-3/8, B3034-3/8 & 65XT-3/8 23.9 (10.8)

69-1/2-L 9/16” (30.1) B3033-1/2 & B3034-1/2 23.6 (10.7)

69-5/8-L 11/16” (50.8) B3033-5/8 23.2 (10.5)

69-3/4-L 13/16” (63.5) B3033-3/4 22.7 (10.3)

11/4”

(31.7)

** Wt./C based on 6” (152.4) length.

For each additional inch in strap

length add 4.2 Lbs (1.9 kg) to Wt./C.

Fig. 69R

Retrofit Retaining Strap

• Specify ‘L’ lengths required

• Minimum recommended return on strap is 1” (25.4)

• Material: Pre-Galvanized Steel

• Standard finishes: GALV

Slot Width For Use Wt./C**

Part No. In. mm Lbs. kg

69R-3/8-L 7/16” (30.1) B3033-3/8, B3034-3/8 & 65XT-3/8 22.9 (10.4)

69R-1/2-L 9/16” (30.1) B3033-1/2 & B3034-1/2 22.6 (10.2)

11/4”

(31.7)

** Wt./C based on 6” (152.4) length.

For each additional inch in strap

length add 4.2 Lbs (1.9 kg) to Wt./C.

B-Line series strut systems 156 Eaton

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

Fig. 65XT

Reversible C-Type Beam Clamp

• Safety Factor of 5

• 3/4” (19.0) Max. flange thickness

• Setscrew and locknut included

• Maximum pipe size 4” (100)

• Design Load 610 Lbs. (2.71kN)

• Material: Steel

• Standard finishes: ZN, PLN

Fig. 65

Reversible Steel C-Type Beam Clamp -

3/4” (19.0mm) Throat Opening

Fig. 66

Reversible Steel C-Type Beam Clamp -

11/4” (31.7mm) Throat Opening

• Safety Factor of 5

• Maximum pipe size 4” (100) for 3/8”-16 rods

• Maximum pipe size 8” (100) for 1/2”-13 rods

• Material: Steel

• Standard finishes: ZN, PLN

Fig. 67SS & Fig. 68SS

Reversible Stainless Steel

C-Type Beam Clamp

• Safety Factor of 5

• Maximum pipe size 4” (100) for

3/8”-16 rods

• Maximum pipe size 8” (100) for

1/2”-13 rods

• Material: Stainless Steel

• Standard finishes: ZN, PLN

3/4” (19.0)

Max.

Flange

Thickness

Rod Size

3/8”-16

11/16”

(27.0)

15/8”

(41.3)

11/2”

(38.1)

7/8”

(22.2)

* Maximum loads for clamp with set screw in up or down position.

Part Rod Set Screw TD BD H W Mac. Rec Load* Approx. Wt./100

No. Size SS in. (mm) in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)

65-1/2 1/2”-13 1/2”-13 x 13/4” 115/16”(49.2) 15/8” (41.3) 17/8” (47.6) 11/4” (31.7) 1130 (31.7) 55 (24.9)

65-5/8 5/8”-11 1/2”-13 x 13/4” 115/16”(49.2) 15/8” (41.3) 17/8” (47.6 11/4” (31.7) 1130 (31.7) 55 (24.9)

66-3/8 3/8”-16 3/8”-16 x 2” 11/2” (38.1) 113/32”(35.7) 23/16”(55.6) 1” (25.4) 610 (2.71) 28 (12.7)

66-1/2 1/2”-13 1/2”-13 x 2” 2” (50.8) 121/32”(42.0) 27/16”(61.9) 11/4” (31.7) 1130 (31.7) 55 (24.9)

66-5/8 5/8”-11 1/2”-13 x 13/4” 2” (50.8) 121/32”(42.0) 27/16”(61.9) 11/4” (31.7) 1130 (31.7) 55 (24.9)

Part Rod Set Screw T W TO Mac. Rec Load* Approx. Wt./100

No. Size SS in. (mm) in. (mm) in. (mm) Lbs. (kN) Lbs. (kg)

67SS-3/8 3/8”-16 3/8”-16 x 11/2” 3/8” (9.6) 1” (25.4) 7/8” (22.2) 1500 (6.67) 68 (30.8)

67SS-1/2 1/2”-13 1/2”-13 x 2” 3/8” (9.6) 11/2” (38.1) 7/8” (22.2) 4050 (18.0) 107 (48.5)

68SS-3/8 3/8”-16 3/8”-16 x 11/2” 3/8” (9.6) 11/2” (38.1) 11/4” (31.7) 1500 (6.67) 84 (38.1)

68SS-1/2 1/2”-13 1/2”-13 x 2” 1/2” (12.7) 2” (50.8) 1” (25.4) 4050 (18.0) 170 (77.1)

Setscrews and

locknuts included

Fig. 65

3/4”

(19.0) 11/4”

(31.7)

SS SS

H H

3”

(76.2)

3”

(76.2)

2”

(50.8)

15/8”

(41.3)

15/8”

(41.3)

17/16”

(36.5)

Rod Size Rod Size

Setscrews

and locknuts

included

Fig. 66

Fig. 67SS Fig. 68SS

157 B-Line series strut systems Eaton

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

B210A

Beam Clamp

• Design Load

300 Lbs. (1.33 kN)

• Safety Factor of 5

• 3/4” (19.0) Max. flange thickness

• 3/8”-16 Setscrew included

• Standard finish: ZN

• Wt./C 60 Lbs. (27.2 kg)

B210

Beam Clamp

• Design Load

800 Lbs. (3.56 kN)

• Safety Factor of 5

• 5/8” (15.9) Max. flange thickness

• 1/2”-13 Setscrew included

• Standard finish: ZN

• Wt./C 100 Lbs. (45.3 kg)

11/2”

(38.1))

11/2”

(38.1)

1/2”

(12.7)

1/4”

(6.3)

3/8”

(9.5)

3/4”

(19.0)

5/8” (15.9)

Max. Flange

Thickness

3/4” (19.0)

Max. Flange

Thickness

2”

(50.8)

2”

(50.8)

3/8”-16

Tap

Bottom

Plate

Only

1/2”-13

Tap

Bottom

Plate Only

BC442

Light Duty Beam Clamp

• Design Load 75 Lbs. (.33 kN)

• Safety Factor of 5

• 11/16” (17.5) Max. flange thickness

• Setscrew included

• Holes tapped 1/4”-20 (bottom & back)

• Material: 13 gauge (2.3)

• Standard finish: ZN

• Wt./C 13 Lbs. (3.9 kg)

B444

Series Rod Support

• Safety Factor of 5

• Max. flange thickness

3/4” (19.0) for 1/4 & 5/16 sizes

1” (25.4) for 3/8 & 1/2 sizes

• Setscrew included

• Material: Malleable iron

• Standard finish: ZN, available in HDG with CZ Hardware

Thread Set C D Design Load Wt./C

Part No. Size A Screw In. mm In. mm Lbs. kN Lbs. kg

B444-1/4 1/4”-20 1/4”-20 13/8” (34.9) 13/16” (30.1) 150 (.66) 24 (10.9)

B444-5/16 5/16”-18 1/4”-20 13/8” (34.9) 13/16” (30.1) 150 (.66) 23 (10.4)

B444-3/8 3/8”-16 1/2”-13 17/8” (47.6) 2” (50.8) 350 (7.12) 65 (29.5)

B444-1/2 1/2”-13 5/8”-11 23/8” (60.3) 21/2” (63.5) 1000 (4.45) 132 (59.9)

13/16”

(20.6)

11/16”

(17.4)

13/4”

(44.1)

D C

(Bottom &

Back)

B3037Z

Z-Purlin C-Clamp

• Design Load 500 Lbs. (2.22 kN)

• Safety Factor of 5

• Designed for attaching a 3/8”-16 hanger rod

to the bottom flange of a Z-purlin

• Setscrew and locknut included

• Material: Malleable iron

• Standard finishes: ZN, PLN

3”

(76.2)

313/32”

(86.5)

Bottom Hanger

Rod Threads

3/8”-16

B-Line series strut systems 158 Eaton

B312 Series

Retaining Strap for use with

B303 thru B309 and B321 Series

• 3/4” (19.0) Max. flange thickness

• For thicker beams, step up one flange width size

• Material: 14 gauge (1.9)

• Standard finishes: GALV, HDG

B321 Series Beam Clamps

• Safety Factor of 5

• 111/16” (42.8) Max. Flange Thickness

• Setscrew included

• When retaining strap is required, order B312 separately

• Recommended setscrew torque: 1/2”-13 350 in-lbs. (39.5 N•m)

5/8”-11 700 in-lbs. (79.0 N•m)

• Minimum flange thickness: B321-1 thru B321-3 1/4” (6.3)

B321-4 and B321-5 3/8” (9.5)

• Standard finishes: ZN, HDG

B303 thru B309 Beam Clamps

• Safety Factor of 5

• Max. flange thickness 1/16” (1.6) thru 7/8” (22.2)

• Setscrew included

• When retaining strap is required, order B312 separately

• Recommended setscrew torque: 3/8”-16 150 in-lbs. (16.9 N•m)

1/2”-13 350 in-lbs. (39.5 N•m)

• Standard finishes: ZN, HDG

11/8”

(28.6)

21/2”

(63.5)

For Flange Width A Wt./C

Part No. In. mm In. mm Lbs. kg

B312-6 6” (152.4) 9” (228.6) 22 (10.0)

B312-9 9” (228.6) 12” (304.8) 30 (13.6)

B312-12 12” (304.8) 15” (381.0) 40 (18.1)

B312-15 15” (381.0) 18” (457.2) 49 (22.2)

15/8”

(41.3)

31/4”

(82.5)

11/4”

(31.7)

13/4”

(44.1)

1/4”

(6.3)

1/2”

(12.7)

Max. Flange

Thickness

111/16” (42.8)

Max. Flange

Thickness

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

Thread Set C D Design Load Wt./C

Part No. Size A Screw In. mm In. mm Lbs. kN Lbs. kg

B303 1/4”-20 3/8”-16 25/16” (58.7) 11 Ga. (3.0) 400 (1.78) 72 (32.6)

B304 5/16”-18 3/8”-16 25/16” (58.7) 11 Ga. (3.0) 600 (2.67) 72 (32.6)

B305 3/8”-16 3/8”-16 25/16” (58.7) 11 Ga. (3.0) 600 (2.67) 72 (32.6)

B306 3/8”-16 1/2”-13 27/16” (61.9) 7 Ga. (4.5) 1100 (4.89) 97 (44.0)

B307 1/2”-13 1/2”-13 27/16” (61.9) 7 Ga. (4.5) 1100 (4.89) 97 (44.0)

B308 1/2”-13 1/2”-13 29/16” (65.1) 1/4” (6.3) 1500 (6.67) 133 (60.3)

B309 5/8”-11 1/2”-13 29/16” (65.1) 1/4” (6.3) 1500 (6.67) 133 (60.3)

Thread Setscrew C D Design Load Wt./C

Part No. Size A Size In. mm In. mm Lbs. kN Lbs. kg

B321-1 3/8”-16 1/2”-13 39/16” (92.1) 1/4” (6.3) 1300 (5.78) 187 (84.8)

B321-2 1/2”-13 1/2”-13 39/16” (92.1) 1/4” (6.3) 1400 (6.23) 186 (84.3)

B321-3 5/8”-11 1/2”-13 39/16” (92.1) 1/4” (6.3) 1600 (7.12) 185 (83.9)

B321-4 5/8”-11 5/8”-11 323/32” (94.4) 5/16” (7.9) 1800 (8.00) 239 (108.4)

B321-5 3/4”-10 5/8”-11 323/32” (94.4) 5/16” (7.9) 2000 (8.89) 238 (107.9)

159 B-Line series strut systems Eaton

B751

Beam Clamp

• Safety Factor of 5

• 3/4” (19.0) Max. flange thickness

• Setscrew and locknut included

• Maximum ATR size 1/2”

• Use B753 Swivel nut (not included)

• Material: 12 gauge (2.6)

• Standard finish: ZN, HDG

• Wt./C 42 Lbs. (19.0 kg)

B752

Beam Clamp Swivel

• Design Load 500 Lbs. (2.22 kN)

• Safety Factor of 5

• Material: 12 gauge (2.6)

• Use B753 Swivel nut (not included)

• Includes:

1 pc. B752 Swivel body

1 pc. 5/16”-18 x 13/4” HHCS

1 pc. 5/16”-18 Hex nut

• Standard finish: ZN

• Wt./C 30 Lbs. (13.6 kg)

B753

Swivel Nut

• Provides a full swivel

of 15° in any direction

Specify rod size

• Standard finish: ZN

B701 Series

J-Hook

• 1/4” (6.3) Diameter J-Hook available upon request

Part Number changes to B751-J_-1/4 and a 1/4-20

machine square nut (MSQN) is used

• Standard finish: ZN

B751-J_-3/8

Beam Clamp Assembly

• Includes:

1 pc. B751 Beam clamp

1 pc. B701 Type J-Hook only

1 pc. SA203-158 Clip

1 pc. 3/8”-16 Hex Nut

• 1/4” (6.3) Diameter J-Hook available upon request

Part Number changes to B751-J_-1/4 and a 1/4-20

machine square nut (MSQN) is used

• Use B753 Swivel Nut (not included)

• Standard finishes: ZN

Design Load 300 Lbs. (1.33 kN)

B751 Clamp (Not

Included)

A Thread Length TL Wt./C

Part No. In. mm In. mm Lbs. kg

B701-J4-3/8 83/4” (222.2) 51/2” (139.7) 26 (11.8)

B701-J6-3/8 113/4” (298.4) 61/2” (165.1) 34 (15.4)

B701-J9-3/8 143/4” (374.6) 61/2” (165.1) 41 (18.6)

B701-J12-3/8 173/4” (450.8) 61/2” (165.1) 48 (21.8)

For Flange Width Wt./C

Part No. In. mm Lbs. kg

B751-J4-3/8 3”-6” (76.2-152.4) 70 (31.7)

B751-J6-3/8 5”-9” (127.0-228.6) 78 (35.4)

B751-J9-3/8 8”-12” (203.2-304.8) 83 (37.6)

B751-J12-3/8 11”-15” (279.4-381.0) 88 (39.9)

For Wt./C

Part No. Rod Size Lbs. kg

B753-3/8 3/8”-16 4.0 (1.8)

B753-1/2 1/2”-13 3.4 (1.5)

3”

(76.2)

2”

(50.8)

1”

(25.4)

Overall

Height

31/4”

(82.5)

B701-J_-3/8 J-Hook

B751 Clamp

A TL

B701-J_-3/8 J-Hook only

SA203-158 Clip

3/8”-16 Hex Nut

For Rod Sizes

1/4” (6.3) to 1 Design Load 300 Lbs. /2” (12.7) (2.22 kN) Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

B-Line series strut systems 160 Eaton

B755-3/8 -J_

Beam Clamp Assembly

• Includes:

1 pc. B755-3/8 Beam clamp

1 pc. B705 Type J-Hook only

1 pc. B705 Clip

1 pc. 1/4”-20 Square nut

• Standard finish: ZN

B705 Series

J-Hook

• Use with B755-3/8

• Standard finish: ZN

B756-3/8

Swing Connector

• Design Load 150 Lbs. (0.66 kN)

• Safety Factor of 5

• Material: 12 gauge (2.6)

• Includes:

1 pc. B756-3/8 Swing

connector body

1 pc. 5/16”-18 x 11/4” SHHMS

1 pc. 5/16”-18 Square nut

• Use B753 Swivel nut (not included)

• Standard finish: ZN

• Wt./C 15 Lbs. (6.8 kg)

Design Load

300 Lbs. (1.33 kN)

Design Load

150 Lbs. (0.66 kN)

3/8” (9.5) Hole For

Swing Connector

3/8”-16 Rod

21/2”

(60.3)

1”

(25.4)

7/8”

(22.2)

B755 Clamp

(Not Included)

Overall

Height

17/8”

(47.6)

B705 Clip

B755 Clamp

B705-J_

J-Hook Only

B705-J_

J-Hook Only

1/4”-20

Machine Nut

B755

3/8 Beam Clamp

• Safety Factor of 5

• 5/8” (15.9) Max. flange thickness

• For 3/8”-16 Hanger rod only

• Material: 12 gauge (2.6)

• Includes:

1 pc. B755 Beam clamp

1 pc. 3/8” x 2” Square head

setscrew

2 pcs. 3/8” Square nut

• Standard finish: ZN

• Wt./C 30 Lbs. (13.6 kg)

3/8”-16 Square

Machine Nuts

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

A Thread Length TL Wt./C

Part No. In. mm In. mm Lbs. kg

B705-J4 73/8” (187.3) 3” (76.2) 17 (7.7)

B705-J6 113/8” (288.9) 41/2” (114.3) 21 (9.5)

B705-J10 133/8” (339.7) 41/2” (114.3) 23 (10.4)

B705-J12 153/8” (390.5) 41/2” (114.3) 25 (11.3)

For Flange Width Wt./C

Part No. In. mm Lbs. kg

B755-3/8-J4 4”-6” (101.6-152.4) 47 (21.3)

B755-3/8-J6 6”-10” (152.4-254.0) 51 (23.1)

B755-3/8-J10 10”-12” (254.0-304.8) 53 (24.0)

B755-3/8-J12 12”-14” (304.8-355.6) 55 (24.9)

161 B-Line series strut systems Eaton

B750 Series

Beam Clamp

• Safety Factor of 5

• Design Load 500 Lbs. (2.22 kN)

• Recommended Torque: J-Hook nut 125 in-lbs. (14.1 N•m)

• Maximum flange thickness 5/8” (15.9)

• Standard finish: ZN

B700 Series

J-Hook

• Includes:

1 pc. J-Bolt

1 pc. Hex Nut

• Maximum flange thickness 5/8” (15.9)

• Standard finish: ZN

15/8”

(41.3)

127/32”

(46.8)

1/2”-13

Rod & Hex

Nut Sold

Separately

1/2”-13

Threads

B500 Series

Square U-Bolt

• Includes:

1 pc. U-Bolt only

2 pcs. 3/8”-16 Hex nuts

• Additional sizes available

• Standard finish: ZN, SS4

21/2”

(63.5)

121/32”

(42.0)

3/8”-16

Threads

Channel Size Wt./C

Part No. In. mm In. mm Lbs. kg

B500-3-3/8 33/8” (85.7) 15/8” x 15/8” (41.3 x 41.3) 25 (11.3)

B500-5 5” (127.0) 31/4” x 15/8” (82.5 x 41.3) 33 (14.9)

7 Ga

(4.6)

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

For Flange Width Wt./C

Part No. In. mm Lbs. kg

B750-J4 3”-6” (76.2-152.4) 109 (49.4)

B750-J6 5”-9” (127.0-228.6) 124 (56.2)

B750-J9 8”-12” (203.2-304.8) 135 (61.2)

B750-J12 11”-15” (279.4-381.0) 147 (66.7)

A Thread Length TL Wt./C

Part No. In. mm In. mm Lbs. kg

B700-J4 81/2” (215.9) 63/4” (171.4) 44 (19.9)

B700-J6 111/2” (292.1) 93/4” (247.6) 53 (24.0)

B700-J9 141/2” (368.3) 123/4” (323.8) 63 (28.6)

B700-J12 171/2” (444.5) 153/4” (400.0) 78 (35.4)

B-Line series strut systems 162 Eaton

B441-22

Beam Clamp

• Design Load 1850 Lbs. (8.23 kN)

when used in pairs

• Safety Factor of 5

• 3/4” (19.0) Max. flange thickness

• For use with 13/16” (20.6) to

15/8” (41.3) high channel

• Recommended Torque:

150 in-lbs. (16.9 N•m)

• Sold in pieces

• Other flange thickness variations

are available, contact us for sizes

• Standard finishes: ZN, HDG, SS4

• Wt./C 87 Lbs. (39.4 kg)

B441-22A

Beam Clamp

• Design Load 1850 Lbs. (8.23 kN)

when used in pairs

• Safety Factor of 5

• 3/4” (19.0) Max. flange thickness

• For use with 15/8” (41.3)

to 31/4” (82.5) high channel

• Recommended Torque:

150 in-lbs. (16.9 N•m)

• Sold in pieces

• Other flange thickness variations

are available, contact us for sizes

• Standard finishes: ZN, HDG, SS4

• Wt./C 93 Lbs. (42.2 kg)

B441Z-22

Beam Clamp

• Design Load 1200 Lbs. (5.34 kN) when used in series

• Safety Factor of 5

• Sold in pieces

• For use with 13/16” (20.6) to 15/8” (41.3) high channel

• Recommended Torque:150 in-lbs. (16.9 N•m)

• Standard finishes: ZN

• Wt./C 95 Lbs. (43.1 kg)

17/8”

1 (47.6) 7/8”

(47.6)

1”

(25.4)

1”

(25.4)

3”

3” (76.2)

(76.2)

33/8”

(85.7)

5”

(127.0)

1/4”

(6.3)

1/4”

(6.3)

1”

(25.4)

45/8”

(117.5)

23/4”

(69.8)

1/4”

(6.3)

3”

(76.2)

B441Z-22A

Beam Clamp

• Design Load 1200 Lbs. (5.34 kN) when used in series

• Safety Factor of 5

• Sold in pieces

• For use with 15/8” (41.3) to 31/4” (82.5) high channel

• Recommended Torque:150 in-lbs. (16.9 N•m)

• Standard finishes: ZN

• Wt./C 101 Lbs. (45.8 kg)

1”

(25.4)

45/8”

(117.5)

43/8”

(111.1)

1/4”

(6.3)

3”

(76.2)

B314

Beam Clamp

• Design Load 900 Lbs. (4.00 kN)

when used in pairs

• Safety Factor of 5

• 5/8” (15.9) Max. flange thickness

• For use with channel 15/8” (41.3)

in height

• Setscrew included

• Sold in pieces

• Standard finishes: ZN, GRN, HDG, SS4

• Wt./C 105 Lbs. (47.6 kg)

13/4”

(44.1)

13/4”

(44.1)

1/4”

(6.3)

37/16”

(87.3)

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

163 B-Line series strut systems Eaton

B212-1/4 I-Beam Clamp

• Design Load 600 Lbs. (2.67 kN) when used in pairs

• Safety Factor of 5

• 7/8” (22.2) Max. flange thickness

• 3/8”-16 Setscrew included

• Sold in pieces

• Standard finish: ZN

• Wt./C 41 Lbs. (18.6 kg)

B212-3/8 I-Beam Clamp

• Design Load 1000 Lbs. (4.45 kN) when used in pairs

• Safety Factor of 5

• 11/8” (28.6) Max. flange thickness

• 1/2”-13 Setscrew included

• Sold in pieces

• Standard finishes: ZN, HDG

• Wt./C 62 Lbs. (28.1 kg)

B355 Beam Clamp

• Design Load 1200 Lbs. (5.34 kN) when used in pairs

• Safety Factor of 5

• 5/8” (15.9) Max. flange thickness

• Sold in pieces

• Order 1/2”-13 x 11/2” HHCS and channel nut separately

• Standard finishes: ZN, GRN, HDG, SS4

• Wt./C 30 Lbs. (13.6 kg)

B211 Zee Beam Clamp

• Design Load 600 Lbs. (2.67 kN) when used in pairs

• Safety Factor of 5

• 1” (25.4) Max. flange thickness

• 1/2”-13 Setscrew included

• Sold in pieces

• Order 1/2”-13 HHCS and channel nut separately

• Standard finishes: ZN, HDG

• Wt./C 66 Lbs. (29.9 kg)

11/4”

(31.7)

11/4”

(31.7)

127/32”

(46.8)

15/8”

(41.3)

5/8”

(15.9)

2”

(50.8)

2”

(50.8)

31/4”

(82.5)

3/8”

(9.5)

11/4” (31.7)

I.D.

3/8” Thick

(9.5)

1/4” Thick

(6.3)

7/8” (22.2)

I.D.

1/4”

(6.3)

11/2”

(38.1)

B213 I-Beam Clamp

• Design Load 900 Lbs. (4.00 kN) when used in pairs

• Safety Factor of 5

• 7/8” (22.2) Max. flange thickness

• 1/2”-13 Setscrew included

• Sold in pieces

• Order 1/2”-13 x 21/4” HHCS and channel nut separately

• Material: Malleable iron

• Standard finishes: ZN, GRN

• Wt./C 95 Lbs. (43.1 kg)

21/2”

(63.5)

11/2”

(38.1)

B435 Beam Clamp

• Design Load 900 Lbs. (4.00 kN) when used in pairs

• Safety Factor of 5

• 21/8” (54.0) Max. flange thickness

• 1/2”-13 x 2” Setscrew included

• Sold in pieces

• Standard finish: ZN

• Wt./C 82 Lbs. (37.2 kg)

11/4”

(31.7)

3/8”

(9.5)

27/8”

(73.0)

2”

(50.8)

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

4Dimension compatible fitting

B-Line series strut systems 164 Eaton

B602A THRU B602C

Beam Clamp with Gusset Assembly

• Safety Factor of 5

• 7/8” (22.2) Max. flange thickness

• Includes:

1 pc. B451 Slotted three hole ‘U’ support with gusset

2 pcs. B213 I-Beam clamp

2 pcs. 1/2”-13 x 21/2” HHCS

2 pcs. 1/2”-13 Hex nuts

• Material: Malleable iron

• Standard finishes: ZN, GRN

13/4”

(44.1)

1/4”

(6.3)

B427

Beam Clamp

• Design Load 1100 Lbs. (4.89 kN) when used in pairs

• Safety Factor of 5

• 21/2” (63.5) Max. flange thickness without channel

• 1/2”-13 x 11/2” Setscrew included

• Sold in pieces

• Standard finish: ZN

• Wt./C 92 Lbs. (41.7 kg) 2 Holes

9/16” (14.3)

Dia.

11/2”

3 (38.1) /8”

(9.5)

27/8”

(73.0)

2”

(50.8)

10°

B405

Suspension Member

• Standard finishes: ZN, GRN

• Wt./C 75 Lbs. (34.0 kg)

B405A

Suspension Member

with Beam Clamp

• 7/8” (22.2) Max. flange thickness

• Includes:

1 pc. B405 Suspension member

1 pc. B213 I-Beam clamp

1 pc. 1/2”-13 x 21/2” HHCS

1 pc. 1/2”-13 Hex Nut

• Material: Malleable iron

• Standard finishes: ZN, GRN

• Wt./C 183 Lbs. (83.0 kg)

37/16”

(87.3) I.D.

37/16”

(87.3)

17/8”

(47.6)

17/8”

(47.6)

111/16”

(42.9)

I.D.

111/16”

(42.9)

1/4”

(6.3)

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

A For Flange Width B Design Load Wt./C

Part No. In. mm In. mm Lbs. kN Lbs. kg

B602A 71/4” (184.1) 23/8”-41/2” (60.3-114.3) 1200 (5.34) 365 (165.1)

B602B 81/2” (215.9) 33/4”-53/4” (95.2-146.0) 1200 (5.34) 383 (173.7)

B602C 103/8” (263.5) 55/8”-75/8” (142.9-193.7) 1200 (5.34) 408 (185.0)

165 B-Line series strut systems Eaton

B760-22 Series

Beam Clamp

• 1” (25.4) Max. flange thickness

• For use with 13/16” (20.6) to 15/8” (41.3) high channel

• Recommended Torques:

U-Bolt nuts 150 in-lbs. (16.9 N•m)

J-Hook nut 60 in-lbs. (6.8 N•m)

• Includes:

1 pc. B760 Plate

1 pc. B701 Type

J-Hook only

1 pc. B500-33/8”

U-Bolt only

3 pcs. 3/8”-16 Hex nuts

• Standard finish: ZN

B761-22 Series

Beam Clamp

• 1” (25.4) Max. flange thickness

• For use with 13/16” (20.6) to 15/8” (41.3) high channel

• Recommended Torques:

U-Bolt nuts 150 in-lbs. (16.9 N•m)

ATR nuts 60 in-lbs. (6.8 N•m)

• Includes:

2 pcs. B700 Plates

2 pcs. B500-33/8” U-Bolts only

1 pc. 3/8”-16 ATR (Length)

6 pcs. 3/8”-16 Hex nuts

• Standard finish: ZN

B761-22A Series

Beam Clamp

• 1” (25.4) Max. flange thickness

• For use with 15/8” (41.3) to 31/4” (82.5) high channel

• Recommended Torques:

U-Bolt nuts 150 in-lbs. (16.9 N•m)

ATR nuts 60 in-lbs. (6.8 N•m)

• Includes:

2 pcs. B700 Plates

2 pcs. B500-5” U-Bolts only

1 pc. 3/8”-16 ATR (Length)

6 pcs. 3/8”-16 Hex nuts

• Standard finish: ZN

B760-22A Series

Beam Clamp

• 1” (25.4) Max. flange thickness

• For use with 15/8” (41.3) to 31/4” (82.5) high channel

• Recommended Torques:

U-Bolt nuts 150 in-lbs. (16.9 N•m)

J-Hook nut 60 in-lbs. (6.8 N•m)

• Includes:

1 pc. B760 Plate

1 pc. B701 Type

J-Hook only

1 pc. B500-5”

U-Bolt only

3 pcs. 3/8”-16 Hex nuts

• Standard finish: ZN

For Flange Width Wt./C

Part No. In. mm Lbs. kg

B760-22-J4 4”-57/8” (101.6-149.2) 122 (55.3)

B760-22-J6 6”-87/8” (152.4-225.4) 129 (58.5)

B760-22-J9 9”-117/8” (228.6-301.6) 135 (61.2)

B760-22-J12 12”-147/8” (304.8-377.8) 141 (63.9)

33/8”

(85.7)

3”

(76.2)

3”

(76.2)

5”

(127.0)

3/8” (9.5) Dia.

J-Hook and

Hex Nut

3/8” (9.5) Dia.

J-Hook and

Hex Nut

1/4”

(6.3)

1/4”

(6.3)

For Flange Width ATR Length Wt./C

Part No. In. mm In. mm Lbs. kg

B761-22-4 4”-57/8” (101.6-149.2) 4” (101.6) 202 (91.6)

B761-22-6 6”-87/8” (152.4-225.4) 6” (152.4) 206 (93.4)

B761-22-9 9”-117/8” (228.6-301.6) 9” (228.6) 214 (97.0)

B761-22-12 12”-147/8”(304.8-377.8) 12” (304.8) 221 (100.2)

33/8”

(85.7)

3”

(76.2)

3/8” (9.5)

ATR and Hex Nut

3/8” (9.5)

ATR and Hex Nut

1/4”

(6.3)

1/4”

(6.3)

3”

(76.2)

5”

(127.0)

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

For Flange Width Wt./C

Part No. In. mm Lbs. kg

B760-22A-J4 4”-57/8” (101.6-149.2) 129 (58.5)

B760-22A-J6 6”-87/8” (152.4-225.4) 136 (61.7)

B760-22A-J9 9”-117/8” (228.6-301.6) 142 (64.4)

B760-22A-J12 12”-147/8” (304.8-377.8) 148 (67.1)

For Flange Width ATR Length Wt./C

Part No. In. mm In. mm Lbs. kg

B761-22A-4 4”-57/8” (101.6-149.2) 4” (101.6) 216 (98.0)

B761-22A-6 6”-87/8” (152.4-225.4) 6” (152.4) 220 (99.8)

B761-22A-9 9”-117/8” (228.6-301.6) 9” (228.6) 228 (103.4)

B761-22A-12 12”-147/8”(304.8-377.8) 12” (304.8) 235 (106.6)

B-Line series strut systems 166 Eaton

B613

Column Support for B22

• Design Load 800 Lbs. (3.56 kN) slip

with Safety Factor of 3

• Use with B22 and B24 channel

• Setscrews to be torqued to 19 ft./Lbs

• Sold in pairs

• Standard finishes: ZN, GRN, HDG

• Wt./C 100 Lbs. (45.3 kg)

B613A

Column Support for B52

• Design Load 800 Lbs. (3.56 kN) slip

with Safety Factor of 3

• Use with B52 and B54 channel

• Setscrews to be torqued to 19 ft./Lbs

• Sold in pairs

• Standard finishes: ZN, GRN, HDG

• Wt./C 100 Lbs. (45.3 kg)

15/8”

(41.3) 15/8”

(41.3)

31/2”

(88.9)

31/2”

(88.9)

3/8” x 2”

Cone Point

Setscrews

3/8” x 2”

Cone Point

Setscrews

B614

Column Support for B22

• Quick installation (one bolt to tighten)

• Design Load 800 Lbs. (3.56 kN) slip

with Safety Factor of 3

• Use with B22 and B24 channel

• Sold in pairs

• Standard finish: ZN

• Wt./C 50 Lbs. (22.6 kg)

B422 Series

Right Angle Clamp

• Safety Factor of 5

• Material: 7 gauge (4.5)

• Standard finishes: ZN, SS4

Conduit Design Load

Size A Vertical Pull Wt./C

Part No. In. mm In. mm Lbs. kN Lbs. kg

B422-1/2 1/2” (15) 23/8” (60.3) 250 (1.11) 38 (17.2)

B422-3/4 3/4” (20) 23/8” (60.3) 300 (1.33) 39 (17.7)

B422-1 1” (25) 27/8” (73.0) 400 (1.78) 48 (21.8)

B422-11/4 11/4” (32) 27/8” (73.0) 400 (1.78) 50 (22.7)

B422-11/2 11/2” (40) 31/4” (82.5) 500 (2.22) 59 (26.7)

B422-2 2 (50) 311/16” (93.7) 600 (2.67) 75 (34.0)

B422-21/2 21/2” (65) 41/4” (107.9) 700 (3.11) 98 (44.4)

B422-3 3” (80) 47/8” (123.8) 800 (3.56) 111 (50.3)

B422-31/2 31/2” (90) 57/16” (138.1) 900 (4.00) 123 (55.8)

B422-4 4” (100) 6” (152.4) 1000 (4.45) 135 (61.2)

Design Load

Vertical Pull

U-Bolt and

Hex Nuts

B107S

U-Support

• Material: 7 gauge (4.5)

• Standard finishes: ZN, GRN

• Wt./C 51 Lbs. (23.1 kg)

B593

Clevis Swivel

• Includes:

1 pc. 3/8”-16 x 2” HHCS

1 pc. 3/8”-16 Hex Nut

• Material: 11 gauge (3.0)

• Standard finishes: ZN, GRN

• Wt./C 31 Lbs. (14.0 kg)

• Illustration shows B107S and

B593 used together

• Design Load 900 Lbs.,

strength of assembly only

• Verify anchorage

7/16” (11.1) Dia.

4 Holes

9/16” (14.3) Dia.

13/4” O.D.

(44.4)

33/4”

(95.2)

13/8”

(34.9) 1”

(25.4)

17/16”

(36.5)

21/2”

(63.5)

11/4”

(31.7)

Beam Clamps

Reference page 154 for general fitting and standard finish specifications.

Beam Clamps

167 B-Line series strut systems Eaton

Our beam attachments and pipe supports offered in this section are designed to provide supports without

drilling or welding. A complete selection of beam clamps, pipe clamps, rollers, supports and accessories are

designed for use with our channels and offer many installation advantages.

Materials & Finishes*

Pipe clamps, pipe hangers, beam clamps,

brackets, and rollers are made from low carbon

steel strips, plates or rod unless noted.

*Unless otherwise noted.

Load Data

The load data published includes a safety factor

of 5.0 unless noted (safety factor = ratio of

ultimate load to the design load).

Recommended Bolt Torque

(unless noted)

*See chart on page 154 for recommended

setscrew torquing.

Metric

Metric dimensions are shown in parentheses. Unless noted, all metric dimensions are in millimeters.

Pipe/Conduit Clamps & Hangers

Finish

Code Finish Specification

PLN Plain ASTM A1011

33,000 PSI min. yield

ZN Electro-Plated Zinc ASTM B633 SC3 Type III

or ASTM A653

GRN DURA GREEN™

DCU DURA-COPPER™

HDG Hot-Dipped Galvanized ASTM A123

YZN Yellow Zinc Chromate ASTM B633 SC3 Type II

SS4 Stainless Steel Type 304 ASTM A240

SS6 Stainless Steel Type 316 ASTM A240

AL Aluminum ASTM B209

Bolt Size 1/4”-20 5/16”-18 3/8”-16 1/2”-13

Foot/Lbs. 6 11 19 50

Nm 8 15 26 68

B-Line series strut systems 168 Eaton

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

169 B-Line series strut systems Eaton

B2207 thru B2213

Multi-Grip Pipe Clamps for Thinwall (EMT),

I.M.C., Rigid Conduit or Pipe

• Safety Factor of 5

• Add PA to suffix for pre-assembled pipe clamps

• Includes combination recess hex head machine screw and square nut

• Material: ASTM A1011 33,000 PSI min. yield

• Standard finish: ZN

Nominal Material O.D. Size Alternate For Design Load Design Load Design Load

Part No. Size Thickness Range Clamp No.’s 123 Wt./C

In. mm In. mm In. mm Lbs. kN Lbs. kN Lbs. kN Lbs. kg

B2207 3

/8” (10) 16 Ga. (1.5) .557-.706 (14.2-17.9) B2000, B2001, 400 (1.78) 50 (.22) 50 (.22) 9 (4.1) B2026

B2208 1/2” (15) 16 Ga. (1.5) .701-.875 (17.8-22.2) B2001, B2008, 400 (1.78) 50 (.22) 50 (.22) 11 (5.0) B2027, B2028

B2209 3/4” (20) 14 Ga. (1.9) .917-1.081 (23.2-27.4) B2002, B2009, 400 (1.78) 50 (.22) 50 (.22) 12 (5.4)

B2210 1” (25) 14 Ga. (1.9) 1.125-1.375 (28.6-34.9) B2003, B2010, 400 (1.78) 50 (.22) 50 (.22) 13 (5.9) B2030, B2031,

B2211 11/4” (32) 14 Ga. (1.9) 1.500-1.691 (38.1-42.9) B2004, B2011, 400 (1.78) 50 (.22) 50 (.22) 15 (6.8) B2033, B2034

B2212 11/2” (40) 12 Ga. (2.6) 1.735-1.931 (44.0-49.0) B2005, B2012, 600 (2.67) 75 (.33) 75 (.33) 23 (10.4) B2035

B2213 2” (50) 12 Ga. (2.6) 2.192-2.400 (55.7-60.9) B2006, B2013 600 (2.67) 75 (.33) 75 (.33) 26 (11.8) B2039

Design Load 1

Design Load 3

Design Load 2

BPC-8 thru BPC-64

Break-Apart Conduit Clamp

• Design Load 200 Lbs. (.896 kN)

• Includes combination recess hex head machine screw

• Material: ASTM A1011 33,000 PSI min. yield

• Standard finish: ZN

Rigid or EMT

Part No. Conduit Size Wt./C

In. mm Lbs. kg

BPC-8 1/2” (21.3) 11.2 (5.1)

BPC-12 3/4” (26.7) 12.7 (5.8)

BPC-16 1” (33.4) 14.5 (6.6)

BPC-20 11/4” (42.2) 16.5 (7.5)

BPC-24 11/2” (48.3) 18.5 (8.4)

BPC-32 2” (60.3) 21.5 (9.8)

BPC-40 21/2” (73.0) 21.5 (9.8)

BPC-48 3” (88.9) 22.0 (10.0)

BPC-56 31/2” (101.6) 23.0 (10.4)

BPC-64 4” (114.3) 27.5 (12.5)

Design Load

4Dimension compatible fitting

open side only OSO

OSO

For UL installations, follow Table 9 in UL2239.

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

B-Line series strut systems 170 Eaton

Nominal Overall Conduit

Length Length Holes Wt./Each

Part No. In. mm In. mm Lbs. kg

BCTS1-12 12 (305) 14 (355) 6 0.87 (0.39)

BCTS1-18 18 (457) 20 (508) 9 1.24 (0.56)

BCTS1-24 24 (609) 26 (660) 12 1.62 (0.73)

BCTS1-30 30 (762) 32 (813) 15 1.99 (0.90)

BCTS1-36 36 (914) 38 (965) 18 2.37 (1.07)

BCTS1-42 42 (1067) 44 (1117) 21 2.74 (1.24)

BCTS1-48 48 (1219) 50 (1270) 24 3.11 (1.41)

BCTS1-54 54 (1371) 56 (1422) 27 3.49 (1.58)

BCTS1-60 60 (1524) 62 (1575) 30 3.86 (1.75)

BCTS1-66 66 (1676) 68 (1727) 33 4.23 (1.92)

BCTS1-72 72 (1829) 74 (1879) 36 4.61 (2.09)

BCTS1-78 78 (1981) 80 (2032) 39 4.98 (2.26)

BCTS1-84 84 (2133) 86 (2184) 42 5.36 (2.43)

BCTS1-90 90 (2286) 92 (2337) 45 5.73 (2.60)

BCTS1-96 96 (2438) 98 (2489) 48 6.10 (2.76)

BCTS1-102 102 (2591) 104 (2641) 51 6.48 (2.94)

BCTS1-108 108 (2743) 110 (2794) 54 6.85 (3.11)

BCTS1-114 114 (2895) 116 (2946) 57 7.22 (3.27)

BCTS1-120 120 (3048) 122 (3099) 60 7.60 (3.45)

BCTS Series Conduit Trapeze Support

For Thinwall (EMT), Rigid Conduit or Pipe

• Used to support multiple runs of conduit/pipe on same elevation

• Available in three sizes:

BCTS1 series for up to 11/4” EMT or 1” Rigid conduit - 16 ga. (1.5mm)

BCTS2 series for up to 2” EMT or 2” Rigid conduit - 16 ga. (1.5mm)

BCTS3 series for up to 4” EMT or 4” Rigid conduit - 14 ga. (1.9mm)

• Multiple lengths available in 6” (152mm) intervals from

12” (305mm) to 120” (3048mm)

• Can be supported with 3/8” or 1/2” threaded rod or bolts by simply flipping

the part from top to bottom (threaded rod and hardware is not included)

• Reduces need for conduit/pipe clamps at every support location

• Can be tiered to support multiple conduit/pipe levels

• Can also support Flextray™ and cable tray

• Flange hole patterns provide multiple options for hanger rods, mounting

hardware, or accessories

• Repeating 6” (152mm) hole pattern for field cutting

• Hanger rod spacing should not exceed 36” (914mm)

• UL Listed for US and Canada - 500 lb. (22.2kN) load rating at 12” (305mm)

hanger spacing for all three sizes - safety factor of 3

• Material: Pre-Galvanized Steel,

Stainless Steel Type 316 (add SS6 to part number, i.e. BCTS1-24SS6)

BCTS1-24 shown

Nominal Length

Overall Length

2”

(50.8)

15/16”

(33.3)

15/16”

(33.3)

25/8”

(66.7)

9/16” dia.

(14.2)

6”

(152.4)

BCTS1 Series - 11/4” EMT/1” Rigid Maximum

Hanger rod spacing loads: Safety Factor of 3 - Evenly distributed maximum

loads • 24” (609mm) is 450 lbs. (2.00kN) • 36” (914mm) is 350 lbs. (1.55kN)

15/8” dia.

conduit hole

(41.4)

7/16” dia.

(111.1)

9/32” dia.

(7.1)

BCTS1

BCTS2

BCTS3

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

171 B-Line series strut systems Eaton

Nominal Overall Conduit

Length Length Holes Wt./Each

Part No. In. mm In. mm Lbs. kg

BCTS2-12 12 (305) 14 (355) 4 0.95 (0.43)

BCTS2-18 18 (457) 20 (508) 6 1.35 (0.61)

BCTS2-24 24 (609) 26 (660) 8 1.75 (0.79)

BCTS2-30 30 (762) 32 (813) 10 2.15 (0.97)

BCTS2-36 36 (914) 38 (965) 12 2.55 (1.15)

BCTS2-42 42 (1067) 44 (1117) 14 2.95 (1.34)

BCTS2-48 48 (1219) 50 (1270) 16 3.35 (1.52)

BCTS2-54 54 (1371) 56 (1422) 18 3.75 (1.70)

BCTS2-60 60 (1524) 62 (1575) 20 4.15 (1.88)

BCTS2-66 66 (1676) 68 (1727) 22 4.55 (2.06)

BCTS2-72 72 (1829) 74 (1879) 24 4.95 (2.24)

BCTS2-78 78 (1981) 80 (2032) 26 5.35 (2.42)

BCTS2-84 84 (2133) 86 (2184) 28 5.75 (2.61)

BCTS2-90 90 (2286) 92 (2337) 30 6.15 (2.79)

BCTS2-96 96 (2438) 98 (2489) 32 6.55 (2.97)

BCTS2-102 102 (2591) 104 (2641) 34 6.95 (3.15)

BCTS2-108 108 (2743) 110 (2794) 36 7.35 (3.33)

BCTS2-114 114 (2895) 116 (2946) 38 7.75 (3.51)

BCTS2-120 120 (3048) 122 (3099) 40 8.15 (3.69)

BCTS2 Series - 2” EMT/2” Rigid Maximum

Hanger rod spacing loads: Safety Factor of 3 - Evenly distributed maximum

loads • 24” (609mm) is 400 lbs. (1.78kN) • 36” (914mm) is 300 lbs. (1.33kN)

Nominal Overall Conduit

Length Length Holes Wt./Each

Part No. In. mm In. mm Lbs. kg

BCTS3-12 12 (305) 14 (355) 2 1.68 (0.76)

BCTS3-18 18 (457) 20 (508) 3 2.35 (1.06)

BCTS3-24 24 (609) 26 (660) 4 3.02 (1.37)

BCTS3-30 30 (762) 32 (813) 5 3.69 (1.67)

BCTS3-36 36 (914) 38 (965) 6 4.36 (1.98)

BCTS3-42 42 (1067) 44 (1117) 7 5.04 (2.28)

BCTS3-48 48 (1219) 50 (1270) 8 5.71 (2.59)

BCTS3-54 54 (1371) 56 (1422) 9 6.38 (2.89)

BCTS3-60 60 (1524) 62 (1575) 10 7.05 (3.20)

BCTS3-66 66 (1676) 68 (1727) 11 7.72 (3.50)

BCTS3-72 72 (1829) 74 (1879) 12 8.40 (3.81)

BCTS3-78 78 (1981) 80 (2032) 13 9.07 (4.11)

BCTS3-84 84 (2133) 86 (2184) 14 9.74 (4.42)

BCTS3-90 90 (2286) 92 (2337) 15 10.41 (4.72)

BCTS3-96 96 (2438) 98 (2489) 16 11.08 (5.02)

BCTS3-102 102 (2591) 104 (2641) 17 11.75 (5.33)

BCTS3-108 108 (2743) 110 (2794) 18 12.43 (5.64)

BCTS3-114 114 (2895) 116 (2946) 19 13.10 (5.94)

BCTS3-120 120 (3048) 122 (3099) 20 13.77 (6.24)

BCTS3 Series - 4” EMT/4” Rigid Maximum

Hanger rod spacing loads: Safety Factor of 3 - Evenly distributed maximum

loads • 24” (609mm) is 800 lbs. (3.56kN) • 36” (914mm) is 750 lbs. (3.33kN)

BCTS Series Conduit Trapeze Support

For Thinwall (EMT), Rigid Conduit or Pipe (Continued)

BCTS2-24 shown

3”

(76.2)

9/16” dia.

(14.2)

6”

(152.4)

7/16” dia.

(111.1)

9/32” dia.

(7.1)

BCTS3-24 shown

Nominal Length

Overall Length

6”

(152.4)

9/16” dia.

(14.2)

6”

(152.4)

7/16” dia.

(111.1)

13/32” x 9/16”

slot

(10.4 x 14.2)

9/32” dia.

(7.1)

25/8” dia.

conduit hole

(66.8)

Nominal Length

Overall Length

15/16”

(33.3)

15/16”

(33.3)

35/8”

(92.1)

15/16”

(33.3)

15/16”

(33.3)

61/2”

(165.1)

45/8” x 51/4”

conduit hole

(117.6 x 133.3)

B2000 Series

Pipe and Conduit Clamps

• Safety Factor of 5

• Add PA to suffix for pre-assembled pipe clamps

• Includes combination recess hex head machine screw and square nut

• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A653 33,000 PSI

min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50

• Standard finishes: ZN, HDG, SS4, SS6, AL

Note: For EMT sizes 21/2” and larger use rigid conduit sizes.

Conduit Material Design Load Design Load Design Load

Size Thickness 123 Wt./C

Part No. In. mm In. mm Lbs. kN Lbs. kN Lbs. kN Lbs. kg

B2001 3/8” (10) 16 Ga. (1.5) 400 U (1.78) 50 (.22) 50 (.22) 10 (4.5)

B2008 1/2” (15) 16 Ga. (1.5) 400 U (1.78) 50 (.22) 50 (.22) 11 (5.0)

B2009 3/4” (20) 14 Ga. (1.9) 600 U (2.67) 75 (.33) 75 (.33) 15 (6.8)

B2010 1” (25) 14 Ga. (1.9) 600 U (2.67) 75 (.33) 75 (.33) 16 (7.2)

B2011 11/4” (32) 14 Ga. (1.9) 600 U (2.67) 75 (.33) 75 (.33) 20 (9.1)

B2012 11/2” (40) 12 Ga. (2.6) 800 U (3.56) 125 (.56) 125 (.56) 30 (13.6)

B2013 2” (50) 12 Ga. (2.6) 800 U (3.56) 125 (.56) 125 (.56) 34 (15.4)

B2014 21/2” (65) 12 Ga. (2.6) 800 U (3.56) 125 (.56) 125 (.56) 38 (17.2)

B2015 3” (80) 12 Ga. (2.6) 800 U (3.56) 125 (.56) 125 (.56) 44 (19.9)

B2016 31/2” (90) 11 Ga. (3.0) 1000 U (4.45) 200 (.89) 150 (.67) 61 (27.6)

B2017 4” (100) 11 Ga. (3.0) 1000 U (4.45) 200 (.89) 150 (.67) 66 (29.9)

B2018 41/2” (115) 11 Ga. (3.0) 1000 U (4.45) 200 (.89) 150 (.67) 70 (31.7)

B2019 5” (125) 11 Ga. (3.0) 1000 U (4.45) 200 (.89) 150 (.67) 77 (34.9)

B2020 6” (150) 11 Ga. (3.0) 1000 U (4.45) 200 (.89) 150 (.67) 100 (45.3)

B2021 7” (175) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 115 (52.1)

B2022 8” (200) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 128 (58.0)

B2130 10” (254) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 160 (72.6)

B2132 12” (305) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 185 (83.9)

Thinwall Conduit (EMT) Clamps

Rigid or Conduit or Pipe Clamps

Design Load 1

Design Load 3

Design Load 2

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

Conduit Material Design Load Design Load Design Load

Size Thickness 123 Wt./C

Part No. In. mm In. mm Lbs. kN Lbs. kN Lbs. kN Lbs. kg

B2000 3/8” (10) 16 Ga. (1.5) 400 U (1.78) 50 (.22) 50 (.22) 10 (4.5)

B2001 1/2” (15) 16 Ga. (1.5) 400 U (1.78) 50 (.22) 50 (.22) 10 (4.5)

B2002 3/4” (20) 16 Ga. (1.9) 400 U (1.78) 50 (.22) 50 (.22) 11 (5.0)

B2003 1” (25) 14 Ga. (1.9) 600 U (2.67) 75 (.33) 75 (.33) 16 (7.2)

B2004 11/4” (32) 14 Ga. (1.9) 600 U (2.67) 75 (.33) 75 (.33) 19 (8.6)

B2005 11/2” (40) 12 Ga. (2.6) 800 U (3.56) 125 (.56) 125 (.56) 28 (12.7)

B2006 2” (50) 12 Ga. (2.6) 800 U (3.56) 125 (.56) 125 (.56) 33 (14.9)

OSO

4Dimension compatible fitting

open side only OSO

B-Line series strut systems 172 Eaton

As shown with U For UL installations, follow Table 9 in UL2239.

B2000 Series PVC Clamps

• Safety Factor of 5

• Add PA to suffix for pre-assembled pipe clamps

• Includes combination recess hex head machine screw and square nut

• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A653 33,000 PSI

min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50

• Standard finishes: PVC

Clamp Sizing Chart for PVC Coated

Rigid Conduit and Clamps

Nominal Conduit Coating

Conduit .020 (.51mm) .040 (1.01mm)

Size Clamp Coating Clamp Coating

In. mm 0 .020” (.51mm) 0 .020” (.51mm)

1/2” (15) B2008 B2002 B2002 B2009

3/4” (20) B2030 B2030 B2030 B2003

1” (25) B2032 B2010 B2010 B2004

11/4” (32) B2005 B2005 B2005 B2005

11/2” (40) B2012 B2037 B2037 B2037

2” (50) B2013 B2041 B2041 B2041

21/2” (65) B2014 B2045 B2045 B2045

3” (80) B2015 B2050 B2050 B2050

31/2” (90) B2016 B2054 B2054 B2054

4” (100) B2017 B2058 B2058 B2058

5” (125) B2019 B2066 B2066 B2066

6” (150) B2020 B2115 B2115 B2115

Clamp Sizing Chart for PVC Coated

Thinwall (EMT) Conduit and Clamps

Design Load 1

Design Load 3

Design Load 2

*See B2000 O.D. pipe and conduit clamp chart on pgs.

131-132 for corresponding clamp load data.

*See B2000 O.D. pipe and conduit clamp chart on pgs.

131-132 for corresponding clamp load data.

Part Tubing Material Design Load Design Load Design Load

No. Size O.D. Size Thickness 12 3 Wt./C

In. (mm) In. (mm) In. (mm) Lbs. kN Lbs. kN Lbs. kN Lbs. kg

B2024DCU 1/4” (6.3) .375 (9.5) 16 Ga. (1.5) 400 (1.78) 50 (.22) 50 (.22) 8 (3.6)

B2025DCU 3/8” (9.5) .500 (12.7) 16 Ga. (1.5) 400 (1.78) 50 (.22) 50 (.22) 9 (4.1)

B2026DCU 1/2” (12.7) .625 (15.9) 16 Ga. (1.5) 400 (1.78) 50 (.22) 50 (.22) 10 (4.5)

B2027DCU 5/8” (15.9) .750 (19.0) 16 Ga. (1.5) 400 (1.78) 50 (.22) 50 (.22) 10 (4.5)

B2008DCU 3/4” (19.0) .875 (22.2) 16 Ga. (1.5) 400 (1.78) 50 (.22) 50 (.22) 11 (5.0)

B2030DCU 1” (25.4) 1.125 (28.6) 14 Ga. (1.9) 600 (2.67) 75 (.33) 75 (.33) 15 (6.8)

B2010DCU 11/4” (31.7) 1.375 (34.9) 14 Ga. (1.9) 600 (2.67) 75 (.33) 75 (.33) 17 (7.7)

B2011DCU 11/2” (38.1) 1.625 (41.3) 14 Ga. (1.9) 600 (2.67) 75 (.33) 75 (.33) 19 (8.6)

B2038DCU 2” (50.8) 2.125 (54.0) 12 Ga. (2.6) 800 (3.56) 125 (.56) 125 (.56) 32 (14.5)

B2042DCU 21/2” (63.5) 2.625 (66.7) 12 Ga. (2.6) 800 (3.56) 125 (.56) 125 (.56) 35 (15.9)

B2046DCU 3” (76.2) 3.125 (79.4) 12 Ga. (2.6) 800 (3.56) 125 (.56) 125 (.56) 39 (17.7)

B2050DCU 31/2” (88.9) 3.625 (92.1) 11 Ga. (3.0) 1000 (4.45) 200 (.89) 150 (.67) 54 (24.5)

B2054DCU 4” (101.6) 4.125 (104.8) 11 Ga. (3.0) 1000 (4.45) 200 (.89) 150 (.67) 61 (27.6)

B2062DCU 5” (127.0) 5.125 (130.2) 11 Ga. (3.0) 1000 (4.45) 200 (.89) 150 (.67) 70 (31.7)

B2110DCU 6” (152.5) 6.125 (155.6) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 94 (42.6)

B2126DCU 8” (203.2) 8.125 (206.4) 11 Ga. (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 123 (55.8)

Copper Tubing Clamps

B2000 Series Copper Tubing Clamps

• Safety Factor of 5

• Add PA to suffix for pre-assembled pipe clamps

• Includes combination recess hex head machine screw and square nut

• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6) ASTM A1011 33,000 PSI

min. yield and 11 Ga. (3.0) ASTM A1011HSLA Gr. 50

• Standard finish: Exclusive DURA-COPPER™ Finish (DCU)

Design Load 1

Design Load 3 Design Load 2

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

Nominal Conduit Coating

Conduit .020 (.51mm) .040 (1.01mm)

Size Clamp Coating Clamp Coating

In. mm 0 .020” (.51mm) 0 .020” (.51mm)

3/8” (10) B2026 B2026 B2026 B2001

1/2” (15) B2027 B2027 B2027 B2008

3/4” (20) B2009 B2009 B2009 B2009

1” (25) B2003 B2031 B2031 B2031

11/4” (32) B2004 B2011 B2011 B2011

11/2” (40) B2005 B2005 B2005 B2012

2” (50) B2039 B2039 B2039 B2013

OSO

4Dimension compatible fitting

open side only OSO

173 B-Line series strut systems Eaton

B2000 Series

O.D. Pipe and Conduit Clamps

• Safety Factor of 5

• Add PA to suffix for pre-assembled pipe clamps

• Other sizes available upon request

• Includes combination recess hex head machine screw

and square nut.

• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6)

ASTM A653 33,000 PSI min. yield and 11 Ga. (3.0)

ASTM A1011HSLA Gr. 50

• Standard finishes: ZN, HDG, SS4

Part O.D. Hardware Material Gauge Design Load Design Load Design Load Wt./C

No. Size (in.) Size Thickness 123

In. mm In.. mm Lbs. kN Lbs. kN Lbs. kN Lbs. kg

B2023 1/4” (6.3) 1/4”-20 16 (1.5) 120 (.54) 30 (.13) 30 (.13) 8 (3.6)

B2024 3/8” (9.5) 1/4”-20 16 (1.5) 300 (1.33) 40 (.18) 40 (.18) 8 (3.6)

B2025 1/2” (12.7) 1/4”-20 16 (1.5) 400 (1.78) 50 (.22) 50 (.22) 9 (4.1)

B2026 5/8” (15.9) 1/4”-20 16 (1.5) 400 (1.78) 50 (.22) 50 (.22) 10 (4.5)

B2027 3/4” (19.0) 1/4”-20 16 (1.5) 400 (1.78) 50 (.22) 50 (.22) 10 (4.5)

B2008 7/8” (22.2) 1/4”-20 16 (1.5) 400 (1.78) 50 (.22) 50 (.22) 11 (5.0)

B2009 1” (25.4) 1/4”-20 14 (1.9) 500 (2.22) 75 (.33) 75 (.33) 15 (6.8)

B2030 11/8” (28.6) 1/4”-20 14 (1.9) 600 (2.67) 75 (.33) 75 (.33) 15 (6.8)

B2031 11/4” (31.7) 1/4”-20 14 (1.9) 600 (2.67) 75 (.33) 75 (.33) 16 (7.3)

B2010 13/8” (34.9) 1/4”-20 14 (1.9) 600 (2.67) 75 (.33) 75 (.33) 17 (7.7)

B2004 11/2” (38.1) 1/4”-20 14 (1.9) 600 (2.67) 75 (.33) 75 (.33) 18 (8.2)

B2011 15/8” (41.3) 1/4”-20 14 (1.9) 600 (2.67) 75 (.33) 75 (.33) 19 (8.6)

B2005 13/4” (44.4) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 29 (13.1)

B2012 17/8” (47.6) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 30 (13.6)

B2037 2 (50.8) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 30 (13.6)

B2038 21/8” (54.0) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 32 (14.5)

B2039 21/4” (57.1) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 32 (14.5)

B2013 23/8” (60.3) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 34 (15.4)

B2041 21/2” (63.5) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 35 (15.9)

B2042 25/8” (66.7) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 35 (15.9)

B2043 23/4” (69.8) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 38 (17.2)

B2014 27/8” (73.0) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 38 (17.2)

B2045 3 (76.2) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 38 (17.2)

B2046 31/8” (79.4) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 39 (17.7)

B2047 31/4” (82.5) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 41 (18.6)

B2048 33/8” (85.7) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 43 (19.5)

B2015 31/2” (88.9) 5/16”-18 12 (2.6) 800 (3.56) 125 (.56) 125 (.56) 44 (20.0)

B2050 35/8” (92.1) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 54 (24.5)

B2051 33/4” (95.2) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 57 (25.8)

B2052 37/8” (41.3) 5/16”-18 11 (3.0) 1000 (4.45 200 (.89) 150 (.67) 55 (25.0)

B2016 4 (101.6) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 57 (25.8)

B2054 41/8” (104.8) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 61 (27.7)

B2055 41/4” (107.9) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 62 (28.1)

B2056 43/8” (111.1) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 64 (29.0)

B2017 41/2” (114.3) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 66 (29.9)

B2058 45/8” (117.5) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 66 (29.9)

O.D. Clamps

Design Load 1

Design Load 3

Design Load 2

O.D.

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

OSO

4Dimension compatible fitting

open side only OSO

B-Line series strut systems 174 Eaton

O.D. Clamps

B2000 Series

O.D. Pipe and Conduit Clamps

• Safety Factor of 5

• Add PA to suffix for pre-assembled pipe clamps

• Other sizes available upon request

• Includes combination recess hex head machine screw

and square nut.

• Material: 16 Ga. (1.5), 14 Ga. (1.9), 12 Ga. (2.6)

ASTM A653 33,000 PSI min. yield and

11 Ga. (3.0) ASTM A1011HSLA Gr. 50

• Standard finishes: ZN, HDG, SS4

Design Load 1

Design Load 2 Design Load 3

O.D. O.D.

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

Part O.D. Hardware Material Gauge Design Load Design Load Design Load Wt./C

No. Size (in.) Size Thickness 123

In. mm In.. mm Lbs. kN Lbs. kN Lbs. kN Lbs. kg

B2059 43/4” (120.6) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 68 (30.8)

B2060 47/8” (123.8) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 69 (31.3)

B2018 5 (127.0) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 70 (31.8)

B2062 51/8” (130.2) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 70 (31.8)

B2063 51/4” (133.3) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 70 (31.8)

B2064 53/8” (136.5) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 77 (34.9)

B2019 51/2” (139.7) 5/16”-18 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 78 (35.4)

B2066 55/8” (142.9) 3/8”-16 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 83 (37.6)

B2067 53/4” (146.0) 3/8”-16 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 84 (38.1)

B2068 57/8” (149.2) 3/8”-16 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 85 (38.6)

B2069 6” (152.4) 3/8”-16 11 (3.0) 1000 (4.45) 200 (.89) 150 (.67) 87 (39.5)

B2110 61/8” (155.6) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 94 (42.6)

B2111 61/4” (158.7) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 96 (43.5)

B2112 63/8” (161.9) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 98 (44.4)

B2113 61/2” (165.1) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 99 (44.9)

B2020 65/8” (168.3) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 100 (45.4)

B2115 63/4” (171.4) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 102 (46.3)

B2116 67/8” (174.6) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 104 (47.2)

B2117 7” (177.8) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 106 (48.1)

B2118 71/8” (181.0) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 108 (49.0)

B2119 71/4” (184.1) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 110 (49.9)

B2120 73/8” (187.3) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 112 (50.8)

B2121 71/2” (190.5) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 114 (51.7)

B2021 75/8” (193.7) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 115 (52.2)

B2123 73/4” (196.8) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 117 (53.1)

B2124 77/8” (200.0) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 119 (54.0)

B2125 8” (203.2) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 121 (54.9)

B2126 81/8” (206.4) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 123 (55.8)

B2127 81/4” (209.5) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 125 (56.7)

B2128 83/8” (212.7) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 126 (57.2)

B2129 81/2” (215.9) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 128 (58.1)

B2022 85/8” (219.1) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 128 (58.1)

B2130 103/4” (273.0) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 160 (72.6)

B2132 123/4” (323.8) 3/8”-16 11 (3.0) 1000 (4.45) 250 (1.11) 200 (.89) 185 (83.9)

OSO

4Dimension compatible fitting

open side only OSO

175 B-Line series strut systems Eaton

B1508 thru B1564S

Conduit/Strut Clamps

• Safety Factor of 3

• Clamps without saddles are not recommended

for flexible conduit or cable

• All Sizes Include:

1/4”-20 slotted hex head machine screw

• Standard finish: ZN

B1508S thru B1524S

B1508 thru B1520

B1532S thru B1564S

Use With

EMT Rigid Conduit Thickness Design Load Wt./C

Part No. In. mm In. mm In. mm Lbs. kN Lbs. kg

B1508 1/2” (15) – – 16 Ga. (1.5) 200 (.89) 7.4 (3.4)

B1512 3/4” (20) 1/2” (15) 16 Ga. (1.5) 200 (.89) 8.0 (3.6)

B1516 1” (25) 3/4” (20) 14 Ga. (1.9) 300 (1.33) 11.0 (5.0)

B1520 11/4” (32) 1” (25) 14 Ga. (1.9) 300 (1.33) 12.5 (5.7)

B1508S 1/2” (15) – – 16 Ga. (1.5) 200 (.89) 8.6 (3.9)

B1512S 3/4” (20) 1/2” (15) 16 Ga. (1.5) 200 (.89) 9.2 (4.2)

B1516S 1” (25) 3/4” (20) 14 Ga. (1.9) 300 (1.33) 12.7 (5.8)

B1520S 11/4” (32) 1” (25) 14 Ga. (1.9) 300 (1.33) 14.6 (6.6)

B1524S 11/2” (40) 11/4” (32) 12 Ga. (2.6) 400 (1.78) 20.5 (9.3)

B1532S 2” (50) 11/2” (40) 12 Ga. (2.6) 400 (1.78) 21.5 (9.8)

B1534S – – 2” (50) 12 Ga. (2.6) 400 (1.78) 22.7 (10.3)

B1540S 21/2” (65) 21/2” (65) 12 Ga. (2.6) 400 (1.78) 26.0 (11.9)

B1548S 3” (80) 3” (80) 12 Ga. (2.6) 400 (1.78) 30.2 (13.7)

B1556S 31/2” (90) 31/2” (90) 12 Ga. (2.6) 400 (1.78) 33.3 (15.1)

B1564S 4” (100) 4” (100) 12 Ga. (2.6) 400 (1.78) 36.6 (16.6)

Design Load

Setscrew

Thickness

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

OSO

4Dimension compatible fitting

open side only OSO

B-Line series strut systems 176 Eaton

B2601 thru B2610

TWIST EAR™ Pipe Clamp

• One piece break apart, screw retainer, thread impressions

• Tighter alignment, no need to leave additional space between

clamps in order to access nut and bolt

• Easier access bolt can be tightened directly from front

• Available in 1/2”, 3/4”, 1” rigid and EMT conduit

• Recommended Torque 30 in. - lbs.

• Safety Factor of 3

• Standard finish: ZN

No loose pieces. One piece

break apart with screw

retainer and thread impressions.

Break-apart - break in the

middle, bolt the ends together.

Allows for multiple clamps to be used in

succession, with easier access than other

pipe clamps.

B-Line

B2609-3/4

3/4\" STD

B-Line

B2609-3/4

3/4\" STD

B-Line

B2609-3/4

3/4\" STD

B-Line

B2609-3/4

3/4\" STD

Use With

EMT Rigid Conduit Thickness Design Load Wt./C

Part No. In. mm In. mm In. mm Lbs. kN Lbs. kg

B2601 1/2” (17.9) – – 16 Ga. (1.5) 300 (1.34) 8.2 (3.7)

B2602 3/4” (23.4) – – 14 Ga. (1.9) 500 (2.24) 13.5 (6.1)

B2603 1” (29.5) – – 14 Ga. (1.9) 500 (2.24) 15.6 (7.1)

B2608 – – 1/2” (21.3) 16 Ga. (1.5) 300 (1.34) 8.2 (3.7)

B2609 – – 3/4” (26.7) 14 Ga. (1.9) 500 (2.24) 13.5 (6.1)

B2610 – – 1” (33.4) 14 Ga. (1.9) 500 (2.24) 15.6 (7.1)

O.D. Size Height H Width W Design Load Wt/C.

Part No. In. mm In. mm In. mm Lbs. kN Lbs. kg

BP081SS .250-.840 (6.4-21.3) 1.86 (47.2) 0.87 (22.1) 300 (1.33) 9.0 (4.1)

BP110SS .810-1.100 (20.6-28.0) 2.18 (55.4) 1.19 (30.2) 300 (1.33) 12.0 (5.4)

BP135SS .850-1.350 (21.6-34.8) 2.25 (57.2) 1.38 (35.1) 300 (1.33) 14.0 (6.3)

BP175SS 1.250-1.750 (31.8-44.4) 2.78 (70.6) 1.78 (45.2) 300 (1.33) 21.0 (9.5)

BP205SS 1.550-2.050 (39.4-52.1) 3.00 (76.2) 2.28 (57.9) 300 (1.33) 30.0 (13.6)

BP250SS 2.00-2.50 (50.8-63.5) 3.43 (87.1) 2.83 (71.9) 300 (1.33) 35.0 (15.9)

BP300SS 2.55-3.00 (64.7-76.2) 3.87 (97.8) 3.15 (80.0) 300 (1.33) 39.0 (17.7)

BP325SS 2.75-3.25 (69.9-82.8) 4.06 (103.1) 3.28 (83.3) 300 (1.33) 41.0 (18.6)

BP375SS 3.25-3.75 (82.6-95.3) 4.60 (116.8) 3.83 (97.3) 300 (1.33) 47.0 (21.3)

BP425SS 3.75-4.25 (95.3-108.0) 5.13 (130.3) 4.50 (114.3) 300 (1.33) 54.0 (24.4)

BP475SS 4.25-4.75 (108.0-120.7) 5.70 (144.7) 4.85 (123.2) 300 (1.33) 58.0 (26.3)

BP081SS thru BP475SS

P Clamps

• Minimizes induction heating

• Material: Stainless Steel Type 304

Setscrew

O.D. Size

Design Load

14 Gauge

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

OSO

4Dimension compatible fitting

open side only OSO

177 B-Line series strut systems Eaton

Catalog Tubing O.D. Size Copper Tubing Size A BC Wt./C

Number In. mm In. mm In. mm In. mm In. mm Lbs. kg

BVT025 1/4” (6.3) 1/8” (3) 1.22 (30.9) 0.19 (4.8) 0.49 (12.4) 11 (5.0)

BVT037 3/8” (9.5) 1/4” (6) 1.36 (34.5) 0.25 (6.3) 0.61 (15.5) 12 (5.4)

BVT050 1/2” (12.7) 3/8” (10) 1.49 (37.8) 0.31 (7.8) 0.74 (18.8) 14 (6.3)

BVT062 5/8” (15.9) 1/2” (15) 1.62 (41.1) 0.38 (9.6) 0.86 (21.8) 15 (6.8)

BVT075 3/4” (19.0) 5/8” (17) 1.87 (47.4) 0.50 (12.7) 1.15 (29.2) 19 (8.6)

BVT087 7/8” (22.2) 3/4” (20) 2.00 (50.8) 0.56 (14.2) 1.27 (32.2) 21 (9.5)

BVT100 1” (25.4) – – 2.25 (57.1) 0.69 (17.5) 1.52 (38.6) 22 (10.0)

BVT112 11/8” (28.6) 1” (25) 2.25 (57.1) 0.69 (17.5) 1.52 (38.6) 26 (11.8)

BVT125 11/4” (31.7) – – 2.51 (63.7) 0.81 (20.6) 1.78 (45.2) 36 (16.3)

BVT137 13/8” (34.9) 11/4” (32) 2.51 (63.7) 0.81 (20.6) 1.78 (45.2) 38 (17.2)

BVT150 11/2” (38.1) – – 2.74 (69.6) 0.88 (22.4) 1.96 (49.8) 35 (15.9)

BVT162 15/8” (41.3) 11/2” (40) 3.00 (76.2) 1.00 (25.4) 2.20 (55.9) 40 (18.1)

BVT175 13/4” (44.4) – – 3.13 (79.5) 1.06 (26.9) 2.33 (59.1) 44 (19.9)

BVT187 17/8” (47.6) – – 3.28 (83.3) 1.13 (28.7) 2.46 (62.5) 40 (18.1)

BVT200 2” (50.8) – – 3.52 (89.4) 1.25 (31.7) 2.70 (68.6) 55 (25.0)

BVT212 21/8” (54.0) 2” (50) 3.52 (89.4) 1.25 (31.7) 2.70 (68.6) 55 (25.0)

BVT225 21/4” (57.1) – – 3.64 (92.4) 1.31 (33.2) 2.83 (71.8) 54 (24.5)

BVT250 21/2” (63.5) – – 3.91 (99.3) 1.43 (36.3) 3.11 (79.0) 56 (25.4)

BVT262 25/8” (66.6) 21/2” (65) 4.02 (102.1) 1.50 (38.1) 3.20 (81.3) 55 (25.0)

BVT300 3” (76.2) – – 4.42 (112.2) 1.68 (42.6) 3.61 (91.6) 67 (30.4)

BVT312 31/8” (79.4) 3” (80) 4.53 (115.0) 1.75 (44.4) 3.70 (93.9) 64 (29.0)

BVT362 35/8” (92.1) 31/2” (90) 5.05 (128.2) 2.00 (50.8) 4.23 (107.4) 76 (34.5)

BVT412 41/8” (104.8) 4” (100) 5.55 (140.9) 2.25 (57.1) 4.73 (120.1) 93 (42.2)

BVT612 61/8” (155.5) 6” (150) 7.62 (193.5) 3.25 (82.5) 6.74 (171.1) 136 (61.6)

Catalog Design Load Design Load Design Load

Number 1 23 Lbs. kN Lbs. kN Lbs. kN

BVT025 400 (1.78) 50 (0.22) 50 (0.22)

BVT037 400 (1.78) 50 (0.22) 50 (0.22)

BVT050 400 (1.78) 50 (0.22) 50 (0.22)

BVT062 400 (1.78) 50 (0.22) 50 (0.22)

BVT075 600 (2.67) 75 (0.33) 75 (0.33)

BVT087 600 (2.67) 75 (0.33) 75 (0.33)

BVT100 600 (2.67) 75 (0.33) 75 (0.33)

BVT112 600 (2.67) 75 (0.33) 75 (0.33)

BVT125 600 (2.67) 75 (0.33) 75 (0.33)

BVT137 600 (2.67) 75 (0.33) 75 (0.33)

BVT150 600 (2.67) 75 (0.33) 75 (0.33)

BVT162 800 (3.56) 125 (0.56) 125 (0.56)

BVT175 800 (3.56) 125 (0.56) 125 (0.56)

BVT187 800 (3.56) 125 (0.56) 125 (0.56)

BVT200 800 (3.56) 125 (0.56) 125 (0.56)

BVT212 800 (3.56) 125 (0.56) 125 (0.56)

BVT225 800 (3.56) 125 (0.56) 125 (0.56)

BVT250 800 (3.56) 125 (0.56) 125 (0.56)

BVT262 800 (3.56) 125 (0.56) 125 (0.56)

BVT300 800 (3.56) 125 (0.56) 125 (0.56)

BVT312 800 (3.56) 125 (0.56) 125 (0.56)

BVT362 1000 (4.45) 200 (0.89) 150 (0.67)

BVT412 1000 (4.45) 200 (0.89) 150 (0.67)

BVT612 1000 (4.45) 200 (0.89) 150 (0.67)

BVT Series VIBRA-CLAMP™ - Copper & O.D.

• Safety Factor of 3

• Accesses tubing sizes 1/8” (3) to 6” (150)

• Allows easy one tool installation

• Endures both high (+300°F) and low (-40°F) temperatures

• Dampens vibration and noise

• Eliminates galvanic metal to metal contact

• Resists most industrial oils and solvents

• Reduces thermal loss and gain

• Helps secure tubing firmly to channel (strut)

• Dielectric strength of 400 volts/mil

• Includes cushion, clamp, screw and nut

• Standard finishes: YZN, SS4

Design Load 1

Design Load 2

Design Load 3

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Vibra-Clamp Pipe Clamps

OSO

4Dimension compatible fitting

open side only OSO

B-Line series strut systems 178 Eaton

Catalog Nominal Pipe Size Steel O.D. Size A BC Wt./C

Number In. mm In. mm In. mm In. mm In. mm Lbs. kg

BVP025 1/4” (6.3) 0.540 (13.7) 1.61 (39.9) 0.37 (9.4) 0.87 (22.1) 15 (6.8)

BVP037 3/8” (9.5) 0.675 (17.1) 1.86 (47.2) 0.50 (12.7) 1.15 (29.2) 18 (8.2)

BVP050 1/2” (12.7) 0.875 (22.2) 1.99 (50.5) 0.56 (14.2) 1.27 (32.3) 20 (9.1)

BVP075 3/4” (19.0) 1.050 (26.7) 2.25 (57.1) 0.69 (17.5) 1.52 (38.6) 21 (9.5)

BVP100 1” (25.4) 1.312 (33.3) 2.51 (63.8) 0.81 (20.6) 1.77 (45.0) 20 (9.1)

BVP125 11/4” (31.7) 1.660 (42.2) 3.00 (76.2) 1.00 (25.4) 2.21 (56.1) 36 (16.3)

BVP150 11/2” (38.1) 1.900 (48.3) 3.21 (83.1) 1.12 (28.4) 2.41 (62.3) 40 (18.1)

BVP200 2” (50.8) 2.375 (60.3) 3.77 (95.8) 1.37 (34.8) 2.96 (75.2) 45 (20.4)

BVP250 21/2” (63.5) 2.875 (73.0) 4.28 (108.7) 1.62 (41.1) 3.46 (87.9) 54 (24.5)

BVP300 3” (76.2) 3.500 (88.9) 5.05 (128.3) 2.00 (50.8) 4.24 (107.7) 81 (36.7)

BVP350 31/2” (88.9) 4.000 (101.6) 5.55 (140.9) 2.25 (57.1) 4.74 (120.3) 87 (39.4)

BVP400 4” (101.6) 4.500 (114.3) 6.05 (153.7) 2.50 (63.5) 5.24 (133.1) 109 (49.4)

BVP500 5” (127.0) 5.563 (141.3) 6.84 (173.7) 3.00 (76.2) 6.24 (158.4) 136 (61.6)

BVP600 6” (152.4) 6.625 (168.3) 8.24 (209.3) 3.56 (90.4) 7.36 (186.9) 163 (73.8)

BVP Series

VIBRA-CLAMP™ - Iron Pipe & Rigid Conduit

• Safety Factor of 3

• Accesses pipe sizes 1/4” (6) to 6” (150)

• Allows easy one tool installation

• Endures both high (+300°F) and low (-40°F) temperatures

• Dampens vibration and noise

• Eliminates galvanic metal to metal contact

• Resists most industrial oils and solvents

• Reduces thermal loss and gain

• Helps secure pipe firmly to channel (strut)

• Dielectric strength of 400 volts/mil

• Includes cushion, clamp, screw and nut

• Standard finishes: YZN, SS4

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Vibra-Clamp Pipe Clamps

Design Load 1

Design Load 2

Design Load 3

Catalog Design Load Design Load Design Load

Number 1 2 3 Lbs. kN Lbs. kN Lbs. kN

BVP025 400 (1.78) 50 (0.22) 50 (0.22)

BVP037 600 (2.67) 75 (0.33) 75 (0.33)

BVP050 600 (2.67) 75 (0.33) 75 (0.33)

BVP075 600 (2.67) 75 (0.33) 75 (0.33)

BVP100 600 (2.67) 75 (0.33) 75 (0.33)

BVP125 800 (3.56) 125 (0.56) 125 (0.56)

BVP150 800 (3.56) 125 (0.56) 125 (0.56)

BVP200 800 (3.56) 125 (0.56) 125 (0.56)

BVP250 800 (3.56) 125 (0.56) 125 (0.56)

BVP300 1000 (4.45) 200 (0.89) 150 (0.67)

BVP350 1000 (4.45) 200 (0.89) 150 (0.67)

BVP400 1000 (4.45) 200 (0.89) 150 (0.67)

BVP500 1000 (4.45) 200 (0.89) 150 (0.67)

BVP600 1000 (4.45) 200 (0.89) 150 (0.67)

OSO

4Dimension compatible fitting

open side only OSO

179 B-Line series strut systems Eaton

IPH Series

Inserted - Inserts with Clamps

• Engineered load-bearing inserts prevents insulation compression

• Innovative insulated pipe support

• Desirable “Foam-to-Foam” bond

• Service temperature range

-58°F (-50°C) to +220°F (+105°C)

Assembly Insert Only Pipe/Copper/OD Hanger

Part No. Part No. Size Size*

IPH03812 IPH03812WO 3/8” O.D. 11/4”

IPH01212 IPH01212WO 1/2” O.D. 11/4”

IPH05812 IPH05812WO 5/8” O.D. 11/2”

IPH07812 IPH07812WO 3/4” O.D. & 7/8” O.D. 2”

IPH11812 IPH11812WO 3/4” IPS & 11/8” O.D. 2”

IPH13812 IPH13812WO 13/8” O.D. 21/2”

IPH15812 IPH15812WO 15/8” O.D. 21/2”

IPH11012 IPH11012WO 11/2” IPS & 17/8” O.D. 3”

IPH21812 IPH21812WO 21/8” O.D. 3”

IPH25812 IPH25812WO 25/8” O.D. 31/2”

IPH31812 IPH31812WO 31/8” O.D. 4”

IPH35812 IPH35812WO 35/8” O.D. 5”

IPH41812 IPH41812WO 41/8” O.D. 6”

IPH40012 IPH40012WO 4” IPS 6”

IPH50012 IPH50012WO 5” IPS 8”

IPH60012 IPH60012WO 6” IPS 8”

1/2” Wall Insulation Thickness

Insert Only Assembly

Insert & Clamp

IPH18230

ARMAFLEX®† Insulation Tape

• 30 ft. (9.14 M) roll

* Recommended pipe hanger size for insulation thickness

shown. (Order hanger separately)

3/4” Wall Insulation Thickness

* Recommended pipe hanger size for insulation thickness

shown. (Order hanger separately)

1” Wall Insulation Thickness

* Recommended pipe hanger size for insulation thickness

shown. (Order hanger separately)

†Armaflex® is a registared trademark of Armacell.

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Armafix™ Clamps & Accessories

Assembly Insert Only Pipe/Copper/OD Hanger

Part No. Part No. Size Size*

IPH03834 IPH03834WO 3/8” O.D. 2”

IPH01234 IPH01234WO 1/2” O.D. 2”

IPH05834 IPH05834WO 5/8” O.D. 2”

IPH07834 IPH07834WO 3/4” O.D. & 7/8” O.D. 21/2”

IPH11834 IPH11834WO 3/4” IPS & 11/8” O.D. 21/2”

IPH13834 IPH13834WO 13/8” O.D. 3”

IPH15834 IPH15834WO 15/8” O.D. 31/2”

IPH11034 IPH11034WO 11/2” IPS & 17/8” O.D. 31/2”

IPH21834 IPH21834WO 21/8” O.D. 4”

IPH25834 IPH25834WO 25/8” O.D. 5”

IPH31834 IPH31834WO 31/8” O.D. 5”

IPH35834 IPH35834WO 35/8” O.D. 6”

IPH41834 IPH41834WO 41/8” O.D. 6”

IPH40034 IPH40034WO 4” IPS 6”

IPH50034 IPH50034WO 5” IPS 8”

IPH60034 IPH60034WO 6” IPS 10”

IPH80034 IPH80034WO 8” IPS 12”

Assembly Insert Only Pipe/Copper/OD Hanger

Part No. Part No. Size Size*

IPH05810 IPH05810WO 5/8” O.D. 21/2”

IPH07810 IPH07810WO 3/4” O.D. & 7/8” O.D. 3”

IPH11810 IPH11810WO 3/4” IPS & 11/8” O.D. 3”

IPH13810 IPH13810WO 13/8” O.D. 31/2”

IPH15810 IPH15810WO 15/8” O.D. 31/2”

IPH11010 IPH11010WO 11/2” IPS & 17/8” O.D. 4”

IPH21810 IPH21810WO 21/8” O.D. 4”

IPH25810 IPH25810WO 25/8” O.D. 5”

IPH31810 IPH31810WO 31/8” O.D. 5”

IPH35810 IPH35810WO 35/8” O.D. 6”

IPH41810 IPH41810WO 41/8” O.D. 6”

IPH40010 IPH40010WO 4” IPS 8”

IPH50010 IPH50010WO 5” IPS 8”

IPH60010 IPH60010WO 6” IPS 10”

IPH80010 IPH80010WO 8” IPS 12”

OSO

4Dimension compatible fitting

open side only OSO

B-Line series strut systems 180 Eaton

B1999

VIBRA-CUSHION

• Packaged 20 Ft. (6.09 m) per carton

• Ideal isolation material

• Inhibits galvanic corrosion

• Dampens sound and vibrations

• Service Temperature Range

-75°F (-60°C) to +375°F (+199°C)

• Wt./Carton 3.8 Lbs. (1.7 kg)

ISO Pipe Isolator

• Non-adhesive rubber tape

• Fuses to itself

• Water resistant

• Ideal Isolation material

• Prevents galvanic reaction caused

by dissimilar metal contact

• Temperature Range

-140°F (-60°C) to +395°F (+200°C)

For Rigid Conduit or Iron Pipe

Nominal Size Length* Use

In. mm In. mm Clamp No.

3/8” (10) 113/16” (46.0) B2027

1/2” (15) 213/16” (58.7) B2002

3/4” (20) 27/8” (73.0) B2003

1” (25) 35/8” (92.1) B2032

11/4” (32) 43/8” (120.6) B2036

11/2” (40) 57/16” (138.1) B2012

2” (50) 67/8” (174.6) B2013

Nominal Size Length* Use

In. mm In. mm Clamp No.

1/4” (6) 13/16” (30.2) B2026

3/8” (10) 19/16” (39.7) B2027

1/2” (15) 17/8” (47.6) B2008

5/8” (17) 25/16” (58.7) B2009

3/4” (20) 23/4” (69.8) B2030

1” (25) 31/2” (88.9) B2010

11/4” (32) 45/16” (109.5) B2011

11/2” (40) 51/8” (130.2) B2012

2” (50) 611/16”(169.9) B2013

21/2” (65) 81/4” (209.5) B2014

3” (80) 913/16”(249.2) B2048

31/2” (90) 113/8” (288.9) B2052

4” (100) 1215/16”(328.6) B2056

5” (125) 161/8” (409.6) B2064

6” (150) 191/4” (488.9) B2112

8” (200) 251/2” (647.7) B2128

For Thinwall (EMT) Conduit

For Copper Tubing Type L & K

Features

Vibra-Cushion™ is designed for use

with refrigeration lines, HVAC,

copper tubing, glass pipe and

hydraulic lines. It provides an

energy-absorption barrier between

the lines and the mounting material

and remains flexible thru its entire

service range of -75°F (-60°C) to

+375°F (+199°C).

This elastomer allows for expansion

and contraction within the mounting

system and prevents galvanic

reaction between dissimilar metals.

Part No. Thickness Ft./Roll

In. mm Ft. m

ISO .020 (0.5) 36 (11)

15/8”

(41.3)

1”

(25.4)

BVS Type - Vibra Strip™

for 15/8\" (41.3) wide B-Line channel

• Fits securely in 15/8” wide channel

• Temperature range: -20°F to 212°F

• Ideal isolation & vibration

dampening qualities

• 45 durometer hardness

• Material: Neoprene

Max. Load

Lbs. per Wt.

Lineal In. Length Std. Each

Part No. Lbs. kg/25.4 mm In. mm Pkg. Lbs. kg

BVS-12 40 (18.1) 12” (304.8) 25 .46 (.21)

BVS-120 40 (18.1) 120”(3048.0) 25 4.60 (2.08)

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Vibra-Cushion Accessories

* Length of Vibra-Cushion * Length of Vibra-Cushion

Nominal Size Length* Use

In. mm In. mm Clamp No.

3/8” (10) 21/8” (54.0) B2002

1/2” (15) 25/8” (66.7) B2009

3/4” (20) 31/4” (82.5) B2031

1” (25) 41/8” (104.8) B2004

11/4” (32) 53/16” (131.8) B2012

11/2” (40) 515/16”(150.8) B2038

2” (50) 71/2” (190.5) B2042

21/2” (65) 9” (228.6) B2046

3” (80) 11” (279.4) B2051

31/2” (90) 121/2” (317.5) B2055

4” (100) 141/2” (368.3) B2059

5” (125) 177/16”(442.9) B2067

6” (150) 203/4” (527.0) B2116

* Length of Vibra-Cushion

181 B-Line series strut systems Eaton

B2400 Series

Standard Pipe Clamp

• Safety Factor of 5

• B2400-3/4 thru B2400-8 are UL listed

• Order hardware separately

• Other sizes available upon request

• Material: Sizes - 1/2” - 11/2”, ASTM A1011 33,000 PSI min. yield;

2” - 12”, ASTM A1018 33,000 PSI min. yield;

14”-Larger, ASTM A36

• Standard finish: ZN

• Ductile iron sizes available

• Meets requirements of MSS SP-58 & SP-69 Type 26

Part No. Pipe Size A B C TW

In. mm In. mm In. mm In. mm In. mm In. mm

B2400-1/2 1/2” (15) 5/16” (7.9) 7/16” (11.1) 213/16” (71.4) 10 Ga. (3.4) 15/8” (41.3)

B2400-3/4 3/4” (20) 5/16” (7.9) 7/16” (11.1) 3” (76.2) 10 Ga. (3.4) 15/8” (41.3)

B2400-1 1” (25) 5/16” (7.9) 7/16” (11.1) 317/32” (89.7) 10 Ga. (3.4) 15/8” (41.3)

B2400-11/4 11/4” (32) 5/16” (7.9) 7/16” (11.1) 33/4” (95.2) 10 Ga. (3.4) 15/8” (41.3)

B2400-11/2 11/2” (40) 5/16” (7.9) 7/16” (11.1) 41/16” (103.2) 10 Ga. (3.4) 15/8” (41.3)

B2400-2 2” (50) 7/16” (11.1) 11/16” (17.4) 521/32” (143.6) 1/4” (6.3) 15/8” (41.3)

B2400-21/2 21/2” (65) 7/16” (11.1) 11/16” (17.4) 65/32” (156.3) 1/4” (6.3) 15/8” (41.3)

B2400-3 3” (80) 7/16” (11.1) 11/16” (17.4) 625/32” (172.2) 1/4” (6.3) 15/8” (41.3)

B2400-31/2 31/2” (90) 7/16” (11.1) 11/16” (17.4) 79/32” (184.9) 1/4” (6.3) 15/8” (41.3)

B2400-4 4” (100) 9/16” (14.3) 11/16” (17.4) 725/32” (197.6) 1/4” (6.3) 15/8” (41.3)

B2400-5 5” (125) 9/16” (14.3) 11/16” (17.4) 87/8” (225.4) 1/4” (6.3) 15/8” (41.3)

B2400-6 6” (150) 9/16” (14.3) 11/16” (17.4) 915/16” (252.4) 1/4” (6.3) 15/8” (41.3)

B2400-8 8” (200) 9/16” (14.3) 11/16” (17.4) 1131/32” (304.0) 1/4” (6.3) 15/8” (41.3)

B2400-10 10” (250) 9/16” (14.3) 11/16” (17.4) 14” (355.6) 1/4” (6.3) 15/8” (41.3)

B2400-12 12” (300) 9/16” (14.3) 11/16” (17.4) 16” (406.4) 1/4” (6.3) 15/8” (41.3)

B2400-14 14” (350) 15/16” (23.8) 11/2” (38.1) 203/4” (527.0) 3/8” (9.5) 13/4” (44.4)

B2400-16 16” (400) 15/16” (23.8) 11/2” (38.1) 223/4” (577.8) 3/8” (9.5) 13/4” (44.4)

B2400-18 18” (460) 15/16” (23.8) 13/4” (44.4) 27” (685.8) 1/2” (12.7) 13/4” (44.4)

B2400-20 20” (510) 15/16” (23.8) 13/4” (44.4) 29” (736.6) 1/2” (12.7) 13/4” (44.4)

B2400-24 24” (610) 15/16” (23.8) 13/4” (44.4) 33” (838.2) 1/2” (12.7) 13/4” (44.4)

Design Load 1

Design Load

Design Load 2

Pipe Size

Hole Size A

Part No. Design Load Design Load Design Load Wt./C

1 23

Lbs. kN Lbs. kN Lbs. kN Lbs. kg

B2400-1/2 600 (2.67) 150 (.67) 105 (.47) 23 (10.4)

B2400-3/4 600 (2.67) 150 (.67) 105 (.47) 26 (11.8)

B2400-1 600 (2.67) 150 (.67) 120 (.53) 31 (14.0)

B2400-11/4 600 (2.67) 150 (.67) 120 (.53) 36 (16.3)

B2400-11/2 600 (2.67) 150 (.67) 120 (.53) 39 (17.7)

B2400-2 1200 (5.34) 480 (2.14) 180 (.80) 93 (42.2)

B2400-21/2 1200 (5.34) 480 (2.14) 180 (.80) 106 (48.1)

B2400-3 1200 (5.34) 480 (2.14) 300 (1.33) 132 (59.9)

B2400-31/2 1200 (5.34) 480 (2.14) 300 (1.33) 151 (68.5)

B2400-4 1500 (6.67) 600 (2.67) 450 (2.00) 160 (72.6)

B2400-5 1500 (6.67) 600 (2.67) 450 (2.00) 192 (87.1)

B2400-6 1500 (6.67) 600 (2.67) 450 (2.00) 219 (99.3)

B2400-8 2000 (8.90) 800 (3.56) 600 (2.67) 297 (134.7)

B2400-10 2000 (8.90) 800 (3.56) 600 (2.67) 465 (210.9)

B2400-12 2000 (8.90) 800 (3.56) 600 (2.67) 560 (254.0)

B2400-14 2000 (8.90) 800 (3.56) 600 (2.67) 761 (345.2)

B2400-16 2000 (8.90) 800 (3.56) 600 (2.67) 861 (390.5)

B2400-18 2000 (8.90) 800 (3.56) 600 (2.67) 1297 (588.3)

B2400-20 2000 (8.90) 800 (3.56) 600 (2.67) 1426 (646.8)

B2400-24 2000 (8.90) 800 (3.56) 600 (2.67) 1682 (762.9)

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

4Dimension compatible fitting

B-Line series strut systems 182 Eaton

B437 Series Two Piece Pipe Clamp

• Clamp halves can turn allowing pipe to

be fastened to channel at any direction

• Order hardware separately

• Standard finish: ZN

B2417 Strut Mounted Pipe Guide

• Copper tubing sizes available - B2417CT Series

• Standard finish: ZN

Hole Size

Part No. Pipe Size A T Wt./C

In. mm In. mm In. mm Lbs. kg

B437-1/2 1/2” (15) 5/16” (7.9) 10 Ga. (3.4) 22 (10.0)

B437-3/4 3/4” (20) 5/16” (7.9) 10 Ga. (3.4) 26 (11.8)

B437-1 1” (25) 5/16” (7.9) 10 Ga. (3.4) 30 (13.6)

B437-11/4 11/4” (32) 5/16” (7.9) 10 Ga. (3.4) 35 (15.9)

B437-11/2 11/2” (40) 5/16” (7.9) 10 Ga. (3.4) 38 (17.2)

B437-2 2” (50) 7/16” (11.1) 1/4” (6.3) 91 (41.3)

B437-21/2 21/2” (65) 7/16” (11.1) 1/4” (6.3) 104 (47.2)

B437-3 3” (80) 7/16” (11.1) 1/4” (6.3) 130 (58.9)

B437-31/2 31/2” (90) 7/16” (11.1) 1/4” (6.3) 149 (67.6)

B437-4 4” (100) 9/16” (11.1) 1/4” (6.3) 158 (71.6)

B437-5 5” (125) 9/16” (11.1) 1/4” (6.3) 190 (86.2)

B437-6 6” (150) 9/16” (11.1) 1/4” (6.3) 217 (98.4)

B437-8 8” (200) 9/16” (11.1) 1/4” (6.3) 295 (133.8)

Clearance

Minimum Includes Wt./C

Part No. Pipe Size Radial Clearance Clamp No.

In. mm In. mm Lbs. kg

B2417-1/2 1/2\" (15) 1/16\" (1.6) B2009 22 (10.0)

B2417-3/4 3/4\" (20) 1/16\" (1.6) B2010 25 (11.3)

B2417-1 1\" (25) 3/32\" (2.3) B2034 30 (13.6)

B2417-11/4 11/4\" (32) 3/32\" (2.3) B2037 47 (21.8)

B2417-11/2 11/2\" (40) 3/32\" (2.3) B2039 51 (23.1)

B2417-2 2\" (50) 1/8\" (3.2) B2043 62 (28.1)

B2417-21/2 21/2\" (65) 1/8\" (3.2) B2047 69 (31.3)

B2417-3 3\" (80) 5/32\" (3.9) B2016 108 (49.0)

B2417-31/2 31/2\" (90) 5/32\" (3.9) B2017 118 (53.5)

B2417-4 4\" (100) 5/32\" (3.9) B2018 128 (58.0)

14 Gauge

(1.9)

Material Design Wt./C

Part No. Pipe Size A Thickness Load

In. mm In. mm In. mm Lbs. kN Lbs. kg

B2070 3/8” (10) 111/16” (42.9) 16 Ga. (1.5) 300 (1.33) 24 (10.9)

B2071 1/2” (15) 13/4” (44.4) 16 Ga. (1.5) 300 (1.33) 26 (11.8)

B2072 3/4” (20) 17/8” (47.6) 14 Ga. (1.9) 300 (1.33) 30 (13.6)

B2073 1” (25) 2” (50.8) 14 Ga. (1.9) 400 (1.78) 33 (14.9)

B2074 11/4” (32) 23/16” (55.6) 14 Ga. (1.9) 400 (1.78) 36 (16.3)

B2075 11/2” (40) 25/16” (58.7) 12 Ga. (2.6) 500 (2.22) 50 (22.7)

B2076 2” (50) 29/16” (65.1) 12 Ga. (2.6) 500 (2.22) 55 (24.9)

B2077 21/2” (65) 27/8” (73.0) 12 Ga. (2.6) 500 (2.22) 60 (27.2)

B2078 3” (80) 33/16” (80.9) 12 Ga. (2.6) 500 (2.22) 66 (29.9)

B2079 31/2” (90) 37/16” (87.3) 11 Ga. (3.0) 500 (2.22) 85 (38.5)

B2080 4” (100) 35/8” (92.1) 11 Ga. (3.0) 500 (2.22) 95 (43.1)

B2070 thru B2080

Parallel Pipe Clamp

• Safety Factor of 2

• Designed to support pipe or rigid conduit

• Includes:

1 pr. pipe clamps

1 pc. stand off plate

1 pc. hlotted hex head

machine screws

1 pc. Square Nut

• Standard finish: ZN

A dimension, from bottom

of channel to center of pipe. Design Load

Pipe

Size

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

4Dimension compatible fitting

183 B-Line series strut systems Eaton

Design Load

Part No. Conduit Size A Vertical Pull Wt./C

In. mm In. mm Lbs. kN Lbs. kg

B422-1/2 1/2” (15) 23/8” (60.3) 250 (1.11) 38 (17.2)

B422-3/4 3/4” (20) 23/8” (60.3) 300 (1.33) 39 (17.7)

B422-1 1” (25) 27/8” (73.0) 400 (1.78) 48 (21.8)

B422-11/4 11/4” (32) 27/8” (73.0) 400 (1.78) 50 (22.7)

B422-11/2 11/2” (40) 31/4” (82.5) 500 (2.22) 59 (26.7)

B422-2 2 (50) 311/16”(93.7) 600 (2.67) 75 (34.0)

B422-21/2 21/2” (65) 41/4” (107.9) 700 (3.11) 98 (44.4)

B422-3 3” (80) 47/8” (123.8) 800 (3.56) 111 (50.3)

B422-31/2 31/2” (90) 57/16”(138.1) 900 (4.00) 123 (55.8)

B422-4 4” (100) 6” (152.4) 1000 (4.45) 135 (61.2)

For Use Wt./C**

Part No. With Lbs. kg

B3367S-1-L B422-1/2 & 3/4 33.4 (5.8)

B3367S-2-L B422-1, 11/4 & 11/2 12.8 (15.1)

Part Pipe/Conduit Size Wt./C

Number In. mm Lbs. kg

B670-3/8 3/8” (10) 32 (14.5)

B670-1/2 1/2” (15) 58 (26.3)

B670-3/4 3/4” (20) 64 (29.0)

B670-1 1” (25) 70 (31.7)

B670-11/4 11/4” (32) 77 (34.9)

B670-11/2 11/2” (40) 93 (42.2)

B670-2 2” (50) 105 (47.6)

B670-21/2 21/2” (65) 143 (64.8)

B670-3 3” (80) 164 (74.4)

B670-31/2 31/2” (90) 190 (86.2)

B670-4 4” (100) 205 (93.0)

B671 Series

Edge Pipe Clamp

• Designed to support pipe or rigid

conduit perpendicular to the edge of

a beam or angle iron

• Hardware included

• Material: Malleable iron

• Standard finish: HDG

B670 Series

Parallel Pipe Clamp

• Designed to support pipe or rigid

conduit parallel to the edge of a

beam or angle iron

• Hardware included

• Material: Malleable iron

• Standard finish: HDG

B422 Series Right Angle Clamp

• Safety Factor of 5

• Material: 7 gauge (4.5)

• Standard finishes: ZN, SS4

Design Load

Vertical Pull

U-Bolt and

Hex Nuts

B3367S

Retaining Strap

• Available in ‘L’ lengths of 6” (152.4), 8” (203.2), 9” (228.6),

10” (254,0), 12” (304.8), 14” (355.6), 16” (406.4), 18” (457.2)

• Material: Steel

• Standard finishes: ZN, PLN

** Wt./C based on 6” (152.4) length. For each additional inch

in strap length add the following to the Wt./C.

For B3367S-1 add 5.7 Lbs (2.6 kg)

For B3367S-2 add 2.2 Lbs (1.0 kg)

Note: Use Fig. 69 (Old B3367-3/8 retaining strap, page 116) for B422-2 thru 4

B3367S-1

B3367S-2

21/4”

(57.1)

12 Gauge

(2.6)

13 Gauge

(2.3)

3/4”

(19.0)

3/8” Dia.

(19.0)

3/8” x 1/2” (9.5) (12.7)

Slots

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

Part Pipe/Conduit Size Wt./C

Number In. mm Lbs. kg

B671-1/2 1/2” (15) 67 (30.4)

B671-3/4 3/4” (20) 71 (32.2)

B671-1 1” (25) 85 (38.5)

B671-11/4 11/4” (32) 91 (41.3)

B671-11/2 11/2” (40) 115 (52.1)

B671-2 2” (50) 135 (61.2)

B671-21/2 21/2” (65) 183 (83.0)

B671-3 3” (80) 230 (104.3)

B-Line series strut systems 184 Eaton

B2084 thru B2091

One Hole O.D. Tubing Clamp

• Material: 14 Gauge (1.9) ASTM A1011 33,000 PSI min. yield

• Standard finish: ZN

B2301 Series

One Hole EMT Strap

• Standard finish: ZN

B2302 Series

One Hole Rigid Conduit/Pipe Strap

• Standard finish: ZN

Conduit/Pipe T W Hole Dia. Wt./C

Part No. In.Sizemm In. mm In. mm In. mm Lbs. kg

B2302-1/4 1/4” (6) .045 (1.1) 5/8” (15.9) 13/64” (5.1) 1.4 (.6)

B2302-3/8 3/8” (10) .050 (1.3) 3/4” (19.0) 9/32” (7.1) 2.4 (1.1)

B2302-1/2 1/2” (15) .050 (1.3) 7/8” (22.2) 9/32” (7.1) 3.3 (1.5)

B2302-3/4 3/4” (20) .050 (1.3) 7/8” (22.2) 9/32” (7.1) 3.8 (1.7)

B2302-1 1” (25) .065 (1.6) 1” (25.4) 9/32” (7.1) 7.2 (3.2)

B2302-11/4 11/4” (32) .065 (1.6) 11/4” (31.7) 21/64” (8.3) 11.0 (5.0)

B2302-11/2 11/2” (40) 11 Ga.(3.0) 1” (25.4) .380 (9.6) 19.2 (8.7)

B2302-2 2” (50) 11 Ga.(3.0) 11/4” (31.7) .389 (9.9) 28.8 (13.0)

B2302-21/2 21/2” (65) 7 Ga. (4.5) 11/4” (31.7) .665 (16.9) 55.2 (25.0)

B2302-3 3” (80) 7 Ga. (4.5) 11/4” (31.7) .650 (16.5) 68.0 (30.8)

B2302-31/2 31/2” (90) 1/4” (6.3) 11/4” (31.7) .622 (15.8) 96.0 (43.5)

B2302-4 4” (100) 1/4” (6.3) 11/4” (31.7) .630 (16.0) 108.0 (49.0)

O.D. Size A Wt./C

Part No. In. mm In. mm Lbs. kg

B2084 1/4” (6.3) 7/8” (22.2) 4.0 (1.8)

B2085 5/16” (7.9) 29/32” (23.0) 4.2 (1.9)

B2086 3/8” (9.5) 31/32” (24.6) 5.2 (2.3)

B2087 1/2” (12.7) 11/16”(25.9) 5.8 (2.6)

B2088 5/8” (15.9) 13/32”(27.8) 7.1 (3.2)

B2089 3/4” (19.0) 15/32”(29.1) 7.7 (3.5)

B2090 7/8” (22.2) 17/32”(30.7) 8.7 (3.9)

B2091 1” (25.4) 19/32”(32.2) 10.0 (4.5)

Hole Dia.

O.D.

Size

15/8”

(41.3)

3/8”

(9.5)

9/32” (7.1)

Dia.

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

Conduit Size T W Hole Dia. Wt./C

Part No. In. mm In. mm In. mm In. mm Lbs. kg

B2301-1/2 1/2” (15) .050 (1.3) 3/4” (19.0) 9/32” (7.1) 2.4 (1.1)

B2301-3/4 3/4” (20) .050 (1.3) 7/8” (22.2) 9/32” (7.1) 4.2 (1.9)

B2301-1 1” (25) .050 (1.3) 1” (25.4) 9/32” (7.1) 8.3 (3.7)

B2301-11/4 11/4” (32) .065 (1.6) 11/4” (31.7) 9/32” (7.1) 11.0 (5.0)

B2301-11/2 11/2” (40) .090 (2.3) 1” (25.4) 11/32” (8.7) 14.8 (6.7)

B2301-2 2” (50) .090 (2.3) 11/4” (31.7) 13/32”(10.3) 21.6 (9.8)

4Dimension compatible fitting

185 B-Line series strut systems Eaton

B3373 Series

Riser Clamp

• Safety Factor of 3.5

• B3373-3/4 thru B3373-8 are UL Listed

• B3373-3/4 thru B3373-6 are FM Approved

• Includes hex head cap screws and hex nuts

• Standard finishes: ZN, PLN

BL1400 Series

Cconduit Hanger

• Safety Factor of 3

• Unless noted all sizes fit both rigid (R) and thinwall (EMT) conduit

• Hardware included

• Standard finishes: ZN, SS4

Conduit Size ABTW Design Load Wt./C

Part No In. mm In. mm In. mm In. mm Lbs. kN Lbs. kg

BL1400 1/2” EMT & Rigid 29/32” (23.0) 9/32” (7.1) 16 Ga. (1.5) 3/4” (19.0) 590 (2.62) 6 (2.7)

BL1410 3/4” EMT & Rigid 31/32” (24.6) 9/32” (7.1) 16 Ga. (1.5) 3/4” (19.0) 590 (2.62) 7 (3.2)

BL1420 1” EMT & Rigid 11/4” (31.7) 9/32” (7.1) 16 Ga. (1.5) 3/4” (19.0) 590 (2.62) 8 (3.6)

BL1425 11/4” EMT 11/4” (31.7) 9/32” (7.1) 18 Ga. (1.2) 7/8” (22.2) 590 (2.62) 10 (4.5)

BL1430 11/4” Rigid,11/2” EMT 113/32” (35.7) 9/32” (8.7) 18 Ga. (1.2) 7/8” (22.2) 590 (2.62) 10 (4.5)

BL1440 11/2” Rigid 15/8” (41.3) 11/32” (8.7) 16 Ga. (1.5) 1” (25.4) 755 (3.36) 17 (7.7)

BL1450 2” EMT & Rigid 21/16” (47.6) 11/32” (8.7) 16 Ga. (1.5) 11/4” (31.7) 755 (3.36) 25 (11.3)

BL1460 21/2” EMT & Rigid 21/16” (52.4) 11/32” (8.7) 16 Ga. (1.5) 11/4” (31.7) 755 (3.36) 26 (11.8)

BL1470 3” EMT & Rigid 21/2” (63.5) 11/32” (8.7) 16 Ga. (1.5) 11/4” (31.7) 820 (3.65) 33 (14.9)

BL1480 31/2” EMT & Rigid 23/4” (69.8) 11/32” (8.7) 16 Ga. (1.5) 11/4” (31.7) 850 (3.78) 36 (16.3)

BL1490 4” EMT & Rigid 31/2” (88.9) 11/32” (8.7) 16 Ga. (1.5) 11/4” (31.7) 1410 (6.27) 40 (18.1)

Pipe Size A Design Load Wt./C

Part No. In. mm In. mm Lbs. kN Lbs. kg

B3373-1/2 1/2” (15) 9” (228.6) 255 (1.13) 101 (45.9)

B3373-3/4 3/4” (20) 91/4” (234.9) 255 (1.13) 105 (47.7)

B3373-1 1” (25) 99/16” (242.9) 255 (1.13) 109 (49.4)

B3373-11/4 11/4” (32) 10” (254.0) 255 (1.13) 112 (50.9)

B3373-11/2 11/2” (32) 101/4” (260.3) 255 (1.13) 113 (51.1)

B3373-2 2” (40) 103/4” (273.0) 255 (1.13) 165 (75.0)

B3373-21/2 21/2” (50) 111/4” (285.7) 390 (1.73) 180 (81.6)

B3373-3 3” (65) 1115/16”(303.2) 530 (2.36) 195 (88.4)

B3373-31/2 31/2” (80) 123/8” (314.3) 670 (2.98) 217 (98.5)

B3373-4 4” (90) 127/8” (327.0) 810 (3.60) 228 (103.5)

B3373-5 5” (100) 14” (355.6) 1160 (5.16) 480 (217.7)

B3373-6 6” (100) 153/16” (385.8) 1570 (6.98) 526 (238.6)

B3373-8 8” (100) 173/4” (450.8) 2500 (11.12) 957 (434.1)

Conduit Size

Design Load

Hole Size B

Pipe Size

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

B-Line series strut systems 186 Eaton

B3690 Series

Adjustable J Hanger

• Safety Factor of 5

• Material:

12 Ga. (2.6) ASTM A1011 33,000 PSI min. yield

11 Ga. (3.0) ASTM A1011 HSLA Gr. 50 Class 1

7 Ga. (4.5) ASTM A1011 33,000 PSI min. yield and

1/4” (6.3) ASTM A1018 33,000 PSI min. yield

• Standard finish: ZN

Pipe or Conduit Size A B CD E

Part No. In. mm In. mm In. mm In. mm In. mm In. mm

B3690-1/2 1/2” (15) 13/32” (10.3) 23/32” (53.2) 1” (25.4) 111/16” (42.5) 13/32” (10.3)

B3690-3/4 3/4” (20) 13/32” (10.3) 211/32” (59.5) 1” (25.4) 113/16” (46.2) 13/32” (10.3)

B3690-1 1” (25) 13/32” (10.3) 219/32” (65.9) 1” (25.4) 115/16” (49.2) 13/32” (10.3)

B3690-11/4 11/4” (32) 13/32” (10.3) 213/16” (71.4) 1” (25.4) 2” (50.4) 13/32” (10.3)

B3690-11/2 11/2” (40) 13/32” (10.3) 31/16” (77.8) 1” (25.4) 21/8” (53.7) 13/32” (10.3)

B3690-2 2” (50) 13/32” (10.3) 31/2” (88.9) 1” (25.4) 25/16” (58.7) 13/32” (10.3)

B3690-21/2 21/2” (65) 9/16” (14.3) 47/16” (112.7) 1” (25.4) 3” (76.2) 9/16” (14.3)

B3690-3 3” (80) 9/16” (14.3) 47/8” (123.8) 1” (25.4) 31/8” (79.4) 9/16” (14.3)

B3690-31/2 31/2” (90) 9/16” (14.3) 53/16” (131.8) 1” (25.4) 33/16” (81.0) 9/16” (14.3)

B3690-4 4” (100) 11/16” (17.5) 61/8” (155.6) 11/4” (31.8) 37/8” (98.4) 9/16” (14.3)

B3690-5 5” (125) 11/16” (17.5) 63/4” (171.4) 11/2” (38.1) 4” (100.8) 9/16” (14.3)

B3690-6 6” (150) 13/16” (20.6) 73/4” (196.8) 13/16” (30.2) 47/16” (112.7) 9/16” (14.3)

B3690-8 8” (200) 13/16” (20.6) 91/4” (235.0) 1” (25.4) 415/16” (125.4) 9/16” (14.3)

FTW Design Load Wt./C

Part No. Bolt Size In. mm In. mm Lbs. kN Lbs. kg

B3690-1/2 1/4”-20 x 21/4” 12 Ga. (2.6) 3/4” (19.0) 400 (1.78) 20 (9.1)

B3690-3/4 1/4”-20 x 21/2” 12 Ga. (2.6) 3/4” (19.0) 400 (1.78) 23 (10.4)

B3690-1 1/4”-20 x 23/4” 12 Ga. (2.6) 3/4” (19.0) 400 (1.78) 24 (10.9)

B3690-11/4 1/4”-20 x 3” 12 Ga. (2.6) 3/4” (19.0) 400 (1.78) 27 (12.2)

B3690-11/2 1/4”-20 x 31/4” 12 Ga. (2.6) 3/4” (19.0) 400 (1.78) 29 (13.1)

B3690-2 1/4”-20 x 31/2” 12 Ga. (2.6) 3/4” (19.0) 400 (1.78) 32 (14.5)

B3690-21/2 3/8”-16 x 41/2” 11 Ga. (3.0) 11/4” (31.7) 800 (3.56) 71 (32.2)

B3690-3 3/8”-16 x 5” 11 Ga. (3.0) 11/4” (31.7) 800 (3.56) 77 (34.9)

B3690-31/2 3/8”-16 x 51/2” 11 Ga. (3.0) 11/4” (31.7) 800 (3.56) 84 (38.1)

B3690-4 3/8”-16 x 61/2” 7 Ga. (4.5) 11/4” (31.7) 800 (3.56) 139 (63.0)

B3690-5 3/8”-16 x 71/2” 7 Ga. (4.5) 11/4” (31.7) 800 (3.56) 166 (75.3)

B3690-6 3/8”-16 x 81/2” 1/4” (6.3) 11/4” (31.7) 1000 (4.45) 226 (102.5)

B3690-8 3/8”-16 x 101/2” 1/4” (6.3) 11/2” (38.1) 1200 (5.34) 332 (150.6)

Felt Lined

B3690F-SIZE

‘D’ Rod Take-Out

Bolt Size ‘F’ and

Hex Nut Included

T x W

‘E’ Diameter. Is

For Wall Mounting

Dia.

Design Load

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Clamps

187 B-Line series strut systems Eaton

B394 Series

Pipe Strap

• Safety Factor of 3

• Includes:

1 Pair pipe clamps with hex head cap screws and hex nuts

1 Hanger strap

• Standard finishes: ZN

Fig. 4B Series (Formerly B386 Series)

Suspension Rod Pipe Strap

• Safety Factor of 3

• Includes hex head cap screws and hex nuts

• Standard finishes: ZN, GRN

Pipe Size A B TW Design Load Wt./C

Part No. In. mm In. mm In. mm In. mm In. mm Lbs. kN Lbs. kg

B394-3/4 3/4” (20) 35/16” (84.1) 7/16” (11.1) 1/8” (3.2) 1” (25.4) 500 (2.22) 71 (32.2)

B394-1 1” (25) 33/4” (95.2) 7/16” (11.1) 1/8” (3.2) 1” (25.4) 500 (2.22) 76 (34.5)

B394-11/4 11/4” (32) 4” (101.6) 7/16” (11.1) 1/8” (3.2) 1” (25.4) 500 (2.22) 77 (34.9)

B394-11/2 11/2” (40) 45/16” (109.5) 7/16” (11.1) 1/8” (3.2) 1” (25.4) 800 (3.56) 79 (35.8)

B394-2 2” (50) 51/2” (139.7) 7/16” (11.1) 1/4” (6.3) 1” (25.4) 1040 (4.62) 166 (75.3)

B394-21/2 21/2” (65) 63/8” (161.9) 9/16” (14.3) 1/4” (6.3) 1” (25.4) 1040 (4.62) 179 (81.2)

B394-3 3” (80) 7” (177.8) 9/16” (14.3) 1/4” (6.3) 1” (25.4) 1040 (4.62) 190 (86.2)

B394-31/2 31/2” (90) 79/16” (192.1) 9/16” (14.3) 1/4” (6.3) 1” (25.4) 1040 (4.62) 203 (92.1)

B394-4 4” (100) 85/8” (219.1) 11/16” (17.4) 1/4” (6.3) 11/4” (31.7) 1040 (4.62) 320 (145.1)

B394-5 5” (125) 93/4” (247.6) 11/16” (17.4) 1/4” (6.3) 11/4” (31.7) 1040 (4.62) 353 (160.1)

B394-6 6” (150) 115/8” (295.3) 13/16” (20.6) 3/8” (9.5) 11/2” (38.1) 1615 (7.18) 637 (288.9

B394-8 8” (200) 137/8” (352.4) 13/16” (20.6) 3/8” (9.5) 11/2” (38.1) 1615 (7.18) 837 (379.6)

‘W’

Clamp

Only

‘T’

Clamp

Only

‘B’ Dia.

Pipe Size

Design Load

Pipe/Conduit Clamps & Hangers

Pipe Size Rod Size BCD Bolt Design Load Wt./C

Part No. in. mm A in. mm in. mm in. mm Size Lbs. kN Lbs. kg

4B-3/4 3/4\" (20) 3/8\"-16 1\" (25.4) 27/8\" (73.0) 25/8\" (66.7) 5/16\"-18 330 (1.47) 56 (3.6)

4B-1 1\" (25) 3/8\"-16 1\" (25.4) 31/4\" (82.5) 215/16\" (74.6) 5/16\"-18 330 (1.47) 60 (3.6)

4B-11/4 11/4\" (32) 3/8\"-16 1\" (25.4) 39/16\" (90.6) 31/4\" (82.5) 5/16\"-18 330 (1.47) 74 (4.5)

4B-11/2 11/2\" (40) 3/8\"-16 1\" (25.4) 313/16\" (96.8) 37/16\" (87.3) 5/16\"-18 330 (1.47) 79 (5.0)

4B-2 2\" (50) 3/8\"-16 11/2\" (38.1) 51/8\" (130.2) 45/8\" (117.5) 5/16\"-18 440 (1.78) 156 (5.0)

4B-21/2 21/2\" (65) 1/2\"-13 13/4\" (44.4) 55/8\" (142.9) 53/8\" (136.5) 3/8\"-16 440 (1.78) 176 (5.4)

4B-3 3\" (80) 1/2\"-13 17/8\" (47.6) 63/4\" (171.4) 61/8\" (155.5) 3/8\"-16 660 (2.93) 198 (6.3)

4B-31/2 31/2\" (90) 1/2\"-13 2\" (50.8) 71/4\" (184.1) 63/4\" (171.4) 3/8\"-16 660 (2.93) 219 (7.2)

4B-4 4\" (100) 5/8\"-11 2\" (50.8) 85/8\" (219.1) 71/4\" (184.1) 2/2\"-13 800 (3.56) 288 (8.1)

4B-5 5\" (125) 5/8\"-11 2\" (50.8) 97/8\" (250.8) 85/16\" (211.1) 5/8\"-11 980 (4.36) 390 (8.1)

4B-6 6\" (150) 3/4\"-10 21/8\" (54.0) 1015/16\" (277.8) 91/2\" (241.3) 5/8\"-11 980 (4.36) 448 (8.1)

4B-8 8\" (200) 7/8\"-9 21/8\" (54.0) 137/16\" (341.2) 111/2\" (292.1) 3/4\"-10 1200 (5.34) 691 (8.1)

Design Load

Reference page 168 for general fitting and standard finish specifications.

Pipe Hangers

B-Line series strut systems 188 Eaton

Pipe Size A B C DW Design Load Wt./C

Part No. In. mm In. mm In. mm In. mm In. mm In. mm Lbs. kN Lbs. kg

B591-2 2” (50) 41/2” (114.3) 41/2” (114.3) 73/16” (182.6) 31/16” (77.8) 15/8” (41.3) 1235 (5.53) 290 (131.5)

B591-21/2 21/2” (65) 5” (127.0) 5” (127.0) 715/16” (201.6) 39/16” (90.5) 15/8” (41.3) 1180 (5.29) 330 (149.7)

B591-3 3” (80) 51/2” (139.7) 53/4” (146.0) 83/4” (222.2) 313/16” (96.8) 15/8” (41.3) 1125 (5.04) 439 (199.1)

B591-31/2 31/2” (90) 6” (152.4) 63/4” (171.4) 91/2” (241.3) 49/16” (115.9) 15/8” (41.3) 1070 (4.79) 490 (222.2)

B591-4 4” (100) 61/2” (165.1) 63/4” (171.4) 101/4” (260.3) 61/16” (128.6) 15/8” (41.3) 1015 (4.55) 545 (247.2)

B591-5 5” (125) 71/2” (190.5) 8” (203.2) 121/8” (308.0) 61/16” (154.0) 15/8” (41.3) 960 (4.30) 666 (302.1)

B591-6 6” (150) 8” (203.2) 83/4” (222.2) 133/16”(335.0) 613/16”(173.0) 15/8” (41.3) 905 (4.05) 724 (328.4)

B591-8 8” (200) 9” (228.6) 101/2” (266.7) 159/16”(395.3) 89/16” (217.5) 2” (50.8) 850 (3.81) 1087 (493.0)

B591 Series

Pipe Bracket Saddle and Clamp

• Safety Factor of 3

• Inside brace not required on B591-2 and B591-21/2

• Includes:

1 pc. Saddle bottom

1 pc. Saddle top (clamp)

2 pcs. Hex head cap screws

2 pcs. Hex nuts

• Standard finish: ZN

B D

113/16”

(30.1)

1/4”

(6.3)

Pipe Size

Design Load

Reference page 168 for general fitting and standard finish specifications.

Pipe Brackets

4Dimension compatible fitting

189 B-Line series strut systems Eaton

Pipe/Conduit Clamps & Hangers

B356

Pipe Block - 2” (50) to 8” (200) Pipe

• Required hardware not included:

1 pc. 3/8”-16 x 1” Hex head cap screw

1 pc. 3/8”-16 Channel nut

• Material: 1/4” (6.3) thick 15/8” (41.3) wide

ASTM A1018 33,000 PSI min. yield

• Standard finish: ZN

• Wt./C 42 Lbs. (19.0 kg) Per pair

31/16”

(77.8)

1”

(25.4)

Hole For 3/8”-16 HHCS

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Block

4Dimension compatible fitting

B-Line series strut systems 190 Eaton

B218

Pipe Rollers - 1/2” (15) to 8” (200) Pipe

• Design Load 500 Lbs. (2.22 kN)

• Safety Factor of 5

• When used with B3160 thru B3165 Saddles (see Pipe Hanger Catalog)

• Malleable iron rollers

• Sold in pairs

• Required hardware not included:

2 pcs. 1/2”-13 x 11/4” Hex head cap screws

2 pcs. 1/2”-13 Channel nuts

• Standard finish: ZN

• Wt./C 256 Lbs. (116.1 kg) Per pair

Insulation Thickness in. (mm)

Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)

1/2” (15) 71/4” (184.1) –– – – – – – – – – ––

3/4” (20) 71/4” (184.1) 71/4” (184.1) 75/8” (193.7) 8” (203.2) – – – – ––

1” (25) 71/4” (184.1) 71/4” (184.1) 75/8” (193.7) 81/4” (209.5) – – – – ––

11/4” (32) 71/4” (184.1) 71/4” (184.1) 8” (203.2) 81/4” (209.5) – – – – ––

11/2” (40) 71/4” (184.1) 75/8” (193.7) 8” (203.2) 81/2” (215.9) 9” (228.6) – – ––

2” (50) 71/4” (184.1) 75/8” (193.7) 81/2” (215.9) 81/2” (215.9) 9” (228.6) – – ––

21/2” (65) 71/4” (184.1) 8” (203.2) 81/2” (215.9) 9” (228.6) 10” (254.0) – – ––

3” (80) 71/4” (184.1) 81/2” (215.9) 9” (228.6) 9” (228.6) 10” (254.0) 10” (254.0) – –

31/2” (90) 71/4” (184.1) 81/2” (215.9) 9” (228.6) 10” (254.0) 10” (254.0) 10” (254.0) – –

4” (100) 75/8” (193.7) 9” (228.6) 9” (228.6) 10” (254.0) 10” (254.0) 11” (279.4) – –

5” (125) 81/2” (215.9) 9” (228.6) 10” (254.0) 10” (254.0) 11” (279.4) 11” (279.4) 12” (304.8)

6” (150) 9” (228.6) 10” (254.0) 10” (254.0) 11” (279.4) 11” (279.4) 11” (279.4) 12” (304.8)

8” (200) 10” (254.0) 11” (279.4) 11” (279.4) 11” (279.4) 12” (304.8) – – ––

Insulation Thickness in. (mm)

Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)

1/2” (15) 211/16” (68.3) – – – – – – – – – – ––

3/4” (20) 213/16” (71.4) 37/8” (98.4) 43/8” (111.1) 47/8” (123.8) – – – – ––

1” (25) 215/16” (74.6) 43/16” (106.4) 411/16” (119.1) 51/16” (128.6) – – – – ––

11/4” (32) 31/8” (79.4) 43/16” (106.4) 45/8” (117.5) 51/8” (130.2) – – – – ––

11/2” (40) 31/4” (82.5) 43/8” (111.1) 47/8” (123.8) 55/16” (134.9) 53/4” (146.0) – – ––

2” (50) 39/16” (90.5) 411/16” (119.1) 51/16” (128.6) 55/8” (142.9) 61/16” (154.0) – – ––

21/2” (65) 313/16” (96.8) 47/8” (123.8) 55/16” (134.9) 6” (152.4) 63/8” (161.9) – – ––

3” (80) 41/8” (104.8) 51/16” (128.6) 59/16” (141.3) 61/8” (155.6) 67/16” (163.5) 7” (177.8) – –

31/2” (90) 43/8” (111.1) 55/16” (134.9) 513/16” (147.6) 61/4” (158.7) 611/16” (169.9) 71/4” (184.1) – –

4” (100) 45/8” (117.5) 59/16” (141.3) 61/16” (154.0) 67/16” (163.5) 615/16” (176.2) 73/8” (187.3) – –

5” (125) 5” (127.0) 61/16” (154.0) 67/16” (163.5) 7” (177.8) 73/8” (187.3) 77/8” (200.0) 813/16”(223.8)

6” (150) 51/2” (139.7) 67/16” (163.5) 615/16” (176.2) 73/8” (187.3) 715/16” (201.6) 81/2” (215.9) 91/2” (241.3)

8” (200) 615/16” (160.3) 73/8” (187.3) 715/16” (201.6) 87/16” (214.3) 815/16” (227.0) – – ––

25/8”

(66.7)

23/8”

(60.3)

Reference Chart - A Dimension

Reference Chart - B Dimension

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Rollers

4Dimension compatible fitting

191 B-Line series strut systems Eaton

B219

Pipe Roller Series - 3/4” (20) to 12” (300) Pipe

• Design Load 750 Lbs. (3.33 kN)

• Safety Factor of 5

• Requires field assembly

• When used with B3160 thru B3165 Saddles (see Pipe Hanger Catalog)

• Malleable iron rollers

• Sold in pairs

• Required hardware not included:

2 pcs. 1/2”-13 x 11/4” Hex head cap screws

2 pcs. 1/2”-13 Channel nuts

• Reference sizing chart on page 193

• Standard finish: ZN

A Wt./C PR

Part No. In. mm Lbs. kg

B219 71/4” (184.1) 253 (114.7)

B219-1 8” (203.2) 258 (117.0)

B219-2 9” (228.6) 263 (119.3)

B219-3 10” (254.0) 269 (122.0)

B219-4 107/8” (276.2) 274 (124.8)

B219-5 115/8” (295.3) 279 (126.5)

Insulation Thickness in. (mm)

Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)

1/2” (15) 211/16” (68.3) –– –– –– –– –– ––

3/4” (20) 213/16” (71.4) 37/8” (98.4) 41/2” (114.3) 47/8” (123.8) –– –– ––

1” (25) 215/16” (74.6) 43/16” (106.4) 45/8” (117.5) 51/16” (128.6) –– –– ––

11/4” (32) 31/8” (79.4) 43/16” (106.4) 45/8” (117.5) 51/8” (130.2) –– –– ––

11/2” (40) 31/4” (82.5) 47/16” (112.7) 47/8” (123.8) 51/4” (133.3) 53/4” (146.0) –– ––

2” (50) 39/16” (90.5) 45/8” (117.5) 53/16” (131.8) 51/2” (139.7) 61/16” (154.0) –– ––

21/2” (65) 33/4” (95.2) 47/8” (123.8) 51/4” (133.3) 6” (152.4) 63/8” (161.9) –– ––

3” (80) 41/8” (104.8) 51/8” (130.2) 59/16” (141.3) 61/16” (154.0) 67/16” (163.5) 615/16” (176.2) – –

31/2” (90) 41/4” (107.9) 51/4” (133.3) 513/16” (147.6) 61/4” (158.7) 611/16” (169.9) 71/16” (179.4) – –

4” (100) 49/16” (115.9) 51/2” (139.7) 61/16” (154.0) 67/16” (163.5) 615/16” (176.2) 73/8” (187.3) – –

5” (125) 51/16” (128.6) 61/16” (154.0) 67/16” (163.5) 7” (177.8) 73/8” (187.3) 77/8” (200.0) 815/16” (227.0)

6” (150) 57/16” (138.1) 67/16” (163.5) 615/16” (176.2) 73/8” (187.3) 77/8” (200.0) 815/16” (211.1) 99/16” (242.9)

8” (200) 63/8” (161.9) 77/16” (188.9) 715/16” (201.6) 83/8” (212.7) 9” (228.6) –– ––

10” (250) 75/16” (185.7) 83/16” (208.0) –– –– –– –– ––

12” (300) 81/4” (209.5) –– –– –– –– –– ––

25/8”

(66.7)

23/8”

(60.3)

Reference Chart - A Dimension

Reference Chart - B Dimension

Reference B219 sizing chart on page 193

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Rollers

4Dimension compatible fitting

B-Line series strut systems 192 Eaton

Insulation Thickness in. (mm)

Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)

1/2” (15) B219 –– –– – –

3/4” (20) B219 B219 B219 B219-1 –––

1” (25) B219 B219 B219-1 B219-1 –––

11/4” (32) B219 B219 B219-1 B219-1 –––

11/2” (40) B219 B219 B219-1 B219-2 B219-2 – –

2” (50) B219 B219-1 B219-1 B219-2 B219-2 – –

21/2” (65) B219 B219-1 B219-2 B219-2 B219-3 – –

3” (80) B219 B219-1 B219-2 B219-2 B219-3 B219-3 –

31/2” (90) B219-1 B219-2 B219-2 B219-3 B219-3 B219-4 –

4” (100) B219-1 B219-2 B219-2 B219-3 B219-3 B219-4 –

5” (125) B219-1 B219-2 B219-3 B219-3 B219-4 B219-4 B219-5

6” (150) B219-2 B219-3 B219-3 B219-4 B219-4 B219-5 B219-5

8” (200) B219-3 B219-4 B219-4 B219-5 B219-5 – –

10” (250) B219-4 B219-5 – –– – –

12” (300) B219-5 –– –– – –

B219 Sizing Chart

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Rollers

193 B-Line series strut systems Eaton

B379

Pipe Rollers - 6” (150) to 18” (450) Pipe

• Design Load 1500 Lbs. (6.67 kN)

• Safety Factor of 5

• Requires field assembly

• When used with B3160 thru B3165 Saddles (see Pipe Hanger Catalog)

• Malleable iron rollers

• Sold in pairs

• Required hardware not included:

2 pcs. 1/2”-13 x 11/4” Hex head cap screws

2 pcs. 1/2”-13 Channel nuts

• Standard finish: ZN

• Wt./C 889 Lbs. (403.2 kg)

4”

(101.6)

Insulation Thickness in. (mm)

Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)

6” (150) 99/16” (242.9) 103/16” (258.8) 105/8” (269.9) 11” (279.4) 113/8” (288.9) 113/4” (298.4) 121/2” (317.5)

8” (200) 101/4” (260.3) 111/16” (281.0) 113/8” (288.9) 113/4” (298.4) 123/16” (309.6) 121/2” (317.5) 131/4” (336.5)

10” (250) 11” (279.4) 113/4” (298.4) 121/8” (308.0) 121/2” (317.5) 1213/16” (325.4) 131/8” (333.4) 137/8” (352.4)

12” (300) 1111/16” (296.9) 129/16” (319.1) 127/8” (327.0) 131/4” (336.5) 139/16” (344.5) 137/8” (352.4) 145/8” (371.5)

14” (350) 121/16” (306.4) 127/8” (327.0) 133/16” (335.0) 139/16” (344.5) 137/8” (352.4) 141/4” (361.9) 147/8” (377.8)

16” (400) 123/4” (323.8) 131/2” (342.9) 137/8” (352.4) 1413/16” (360.4) 141/2” (368.3) 147/8” (377.8) 151/2” (393.7)

18” (450) 131/2” (342.9) 141/4” (361.9) 145/8” (371.5) 15” (381.0) 155/16” (388.9) 155/8” (396.9) 165/16” (414.3)

Insulation Thickness in. (mm)

Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)

6” (150) 67/8” (174.6) 77/8” (200.0) 83/8” (212.7) 87/8” (225.4) 93/8” (238.1) 97/8” (250.8) 1015/16” (277.8)

8” (200) 713/16” (198.4) 87/8” (225.4) 93/8” (238.1) 97/8” (250.8) 107/16” (265.1) 1015/16”(277.8) 117/8” (301.6)

10” (250) 813/16” (223.8) 97/8” (250.8) 107/16” (265.1) 1015/16” (277.8) 113/8” (228.9) 117/8” (301.6) 1213/16” (325.4)

12” (300) 93/4” (247.6) 1015/16” (277.8) 113/8” (288.9) 117/8” (301.6) 125/16” (312.7) 1213/16”(325.4) 133/4” (349.2)

14” (350) 105/16” (261.9) 113/8” (288.9) 117/8” (301.6) 125/16” (312.7) 1213/16” (325.4) 131/4” (336.5) 141/4” (361.9)

16” (400) 115/16” (287.3) 125/16” (312.7) 1213/16” (325.4) 131/4” (336.5) 133/4” (349.2) 141/4” (361.9) 151/8” (384.2)

18” (450) 121/4” (311.1) 131/4” (336.5) 133/4” (349.2) 143/16” (360.4) 1411/16” (373.1) 151/8” (384.2) 161/16” (408.0)

Reference Chart - A Dimension

Reference Chart - B Dimension

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Rollers

4Dimension compatible fitting

B-Line series strut systems 194 Eaton

B479

Pipe Rollers - 16” (400) to 30” (750) Pipe

• Design Load 2000 Lbs. (8.89 kN)

• Safety Factor of 5

• Requires field assembly

• When used with B3160 thru B3165 Saddles (see Pipe Hanger Catalog)

• Malleable iron rollers

• Sold in pieces

• Required hardware not included:

4 pcs. 1/2”-13 x 11/4” Hex head cap screws

4 pcs. 1/2”-13 Channel nuts

• Standard finish: ZN

• Wt./C 889 Lbs. (403.2 kg)

4”

(101.6)

Insulation Thickness in. (mm)

Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)

16” (400) 153/16” (385.8) 155/8” (396.9) 157/8” (403.2) 16” (406.4) 161/4” (412.7) 161/2” (419.1) 17” (431.8)

18” (450) 151/2” (393.7) 16” (406.4) 163/16” (411.2) 163/8” (415.9) 169/16” (420.7) 163/4” (425.4) 173/16” (436.6)

20” (500) 16” (406.4) 163/8” (415.9) 169/16” (420.7) 167/8” (428.6) 1615/16” (430.2) 173/16” (436.6) 171/2” (444.5)

24” (600) 1613/16” (427.0) 175/16” (439.7) 171/2” (444.5) 171/2” (444.5) 1711/16” (449.3) 177/8” (454.0) 181/8” (460.4)

30” (750) 1713/16” (452.4) 181/4” (463.5) 183/8” (466.7) 189/16” (471.5) 187/8” (476.2) 187/8” (479.4) 191/4” (488.9)

Insulation Thickness in. (mm)

Pipe Size 0” (0.0) 1” (25.4) 11/2” (38.1) 2” (50.8) 21/2” (63.5) 3” (76.2) 4” (101.6)

16” (400) 1013/16” (274.6) 1115/16” (303.2) 123/8” (314.3) 1215/16” (328.6) 133/8” (339.7) 1315/16” (354.0) 1415/16” (379.4)

18” (450) 117/8” (301.6) 1215/16” (328.6) 137/16” (341.3) 1315/16” (354.0) 147/16” (366.7) 1415/16” (379.4) 1515/16” (404.8)

20” (500) 123/16” (325.4) 1315/16” (354.0) 147/16” (366.7) 147/8” (377.8) 157/16” (392.1) 157/8” (403.2) 1615/16” (430.2)

24” (600) 1413/16” (376.2) 157/8” (403.2) 163/8” (415.9) 167/8” (428.6) 173/8” (441.3) 177/8” (454.0) 187/8” (479.4)

30” (750) 1713/16” (452.4) 187/8” (479.4) 193/8” (492.1) 197/8” (504.8) 203/8” (517.5) 205/16” (531.8) 2115/16” (557.2)

Reference Chart - A Dimension

Reference Chart - B Dimension

213/16”

(71.4)

Pipe/Conduit Clamps & Hangers

Reference page 168 for general fitting and standard finish specifications.

Pipe Rollers

4Dimension compatible fitting

195 B-Line series strut systems Eaton

Our DURA-BLOK™ products gives you a versatile and long-term solution for all your roof top support needs. Designed

with flexibility in mind, DURA-BLOK is ideal for roof top support applications such as pipe, HVAC, duct, conduit, cable

tray, and roof walkways.

Manufactured to provide years of service in harsh, roof top environments, DURA-BLOK is made from 100% recycled

rubber, requires no supplemental rubber pads, and will not float or blow away. The 1” (25.4) gap between blocks allow

water to flow freely around longer assemblies. For added strength, the DURA-BLOK support channel is through bolted

on all sizes. For added visibility, a reflective strip is incorporated on both sides of each DURA-BLOK support.

Beyond product durability, DURA-BLOK helps to dampen vibration, are not sharp or abrasive and requires no roof

penetration to maximize existing roof life - and roof structural and environmental integrity. DURA-BLOK is also

resistant to freezing and thawing.

Recommended Torque (In channels)

Materials & Finishes

See appropriate fitting pages.

Alternative finishes available upon request.

Metric

Metric dimensions are shown in parentheses.

Unless noted, all metric dimensions are in millimeters.

DURA-BLOK Supports

DURA-BLOK Rooftop Supports

Bolt Size 1/4”-20 5/16”-18 3/8”-16 1/2”-13

Foot/Lbs. 6 11 19 50

Nm 8 15 26 68

Bolt Size M6x1 M8 x1.25 M10 x 1.5 M12x1.75

Nm 12 17 36 62

Foot/Lbs. 9 13 27 46

B-Line series strut systems 196 Eaton

DURA-BLOK Supports

Support Bases Only

• Base only - see chart for height, width and length.

• 100% recycled rubber, UV resistant.

• Load Rating - Ultimate Uniform Load (See Chart Below)*

• DURA-BLOK™ channel support is designed as an economical support for piping systems,

cable tray, HVAC equipment and many other applications. The DURA-BLOK is UV

resistant and suitable for any type of roofing material or other flat surfaces. Material

effectively accepts screw fasteners for securing accessories.

* General Note: Consult roofing manufacturer or engineer for roof load capacity.

The weakest point may be the insulation board beneath the rubber membrane.

DB Series - Support Bases with Channel

• Base with 1” (25.4mm) tall galvanized channel -

see chart for overall height, width and length.

• 100% recycled rubber, UV resistant.

• Load Rating - Ultimate Uniform Load (See Chart Below)*

• DURA-BLOK DB-Series channel support is designed for superior support of

piping systems, cable tray, HVAC equipment, walkway systems and many other

applications. The DURA-BLOK is UV resistant and suitable for installation on any

type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and

roller supports that can be used with these DURA-BLOK supports, see page 202)

• For sloped roofs use B634 adjustable hinge fittings (see page 118).

Height x Width x Length Wt./Each Load Rating

Part No. In. mm Lbs. kg Lbs. kN

DB5 5” x 6” x 4.8” (127.0 x 152.4 x 121.9) 2.75 (125) 200 (0.89)

DB10 5” x 6” x 9.6” (127.0 x 152.4 x 243.8) 5.28 (2.39) 500 (2.22)

DB20 5” x 6” x 20.2” (127.0 x 152.4 x 513.1) 10.63 (4.82) 1000 (4.45)

DB30 5” x 6” x 30.8” (127.0 x 152.4 x 782.3) 15.99 (7.25) 1500 (6.67)

DB40 5” x 6” x 41.4” (127.0 x 152.4 x 1051.5) 21.34 (9.68) 2000 (8.89)

DB48 5” x 6” x 52.0” (127.0 x 152.4 x 1320.8) 26.70 (12.40) 2500 (11.12)

Height x Width x Length Wt./Each Load Rating

Part No. In. mm Lbs. kg Lbs. kN

DBM 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 2.35 (1.07) 200 (0.89)

DBP 4” x 6” x 9.6” (101.6 x 152.4 x 243.8) 4.48 (2.03) 500 (2.22)

Height x Width x Length Wt./Each Load Rating

Part No. In. mm Lbs. kg Lbs. kN

DB610 67/16” x 6” x 9.6” (163.5 x 152.4 x 243.8) 6.36 (2.88) 500 (2.22)

DB620 67/16” x 6” x 20.2” (163.5 x 152.4 x 513.1) 12.90 (5.85) 1000 (4.45)

DB630 67/16” x 6” x 30.8” (163.5 x 152.4 x 782.3) 19.45 (8.82) 1500 (6.67)

DB640 67/16” x 6” x 41.4” (163.5 x 152.4 x 1051.5) 26.00 (11.79) 2000 (8.89)

DB648 67/16” x 6” x 52.0” (163.5 x 152.4 x 1320.8) 32.55 (14.76) 2500 (11.12)

DB6 Series - Support Base with B12 Channel

• Base with 12 ga. (2.6mm) galvanized channel 27/16” (61.9mm) tall -

see chart for overall height, width and length.

• 100% recycled rubber, UV resistant.

• Load Rating - Ultimate Uniform Load (See Chart Below)*

• DURA-BLOK DB-Series channel support is designed for superior support of piping

systems, cable tray, HVAC equipment, walkway systems and many other

applications. The DURA-BLOK is UV resistant and suitable for installation on any

type of roofing material or other flat surfaces. (For pipe straps/clamps, rollers and

roller supports that can be used with these DURA-BLOK supports, see page 202)

• For sloped roofs use B634 adjustable hinge fittings (see page 118).

DB20

DB10

DBP

DBM

DB30

DB610

DB620

DB630

Reference page 196 for general fitting and standard finish specifications.

DURA-BLOK Rooftop Supports

197 B-Line series strut systems

DURA-BLOK Supports

DB10 SERIES

Support Bases with B22 Channel

• Two (2) bases bridged with 12 ga. (2.6mm) galvanized channel

15/8” (41.3mm) tall - see chart for overall height, width and length.

• 100% recycled rubber, UV resistant.

• Load Rating: 1000 lbs. (4.45kN) (Uniform Load)*

• DURA-BLOK™ DB10-Series channel support is designed for superior support of

piping systems, cable tray, HVAC equipment, walkway systems and many

other applications. The DURA-BLOK is UV resistant and suitable for installation

on any type of roofing material or other flat surfaces. (For pipe straps/clamps,

rollers and roller supports that can be used with these DURA-BLOK supports,

see page 202)

Height x Width x Length Wt./Each

Part No. In. mm Lbs. kg

DB10-28 55/8” x 6” x 28” (142.9 x 152.4 x 711.2) 13.16 (5.97)

DB10-36 55/8” x 6” x 36” (142.9 x 152.4 x 914.4) 14.36 (6.51)

DB10-42 55/8” x 6” x 42” (142.9 x 152.4 x 1066.8) 15.52 (7.04)

DB10-50 55/8” x 6” x 50” (142.9 x 152.4 x 1270.0) 16.45 (7.46)

DB10-60 55/8” x 6” x 60” (142.9 x 152.4 x 1524.0) 17.94 (8.14)

DBM SERIES

Support Base with Riser Rod & Clamp

• Base with 3/8”-16 threaded rod and B3198H clamp -

see chart for height, width and length

• 100% recycled rubber, UV resistant.

• Load Rating” 50 lbs. (0.22kN) (Ultimate Load)*

• DURA-BLOK DBM-Series pipe/tubing support is designed for support of

single piping systems where elevation adjustment is needed. The

DURA-BLOK is UV resistant and suitable for installation on any type of

roofing material or other flat surfaces.

Clamp Block -Height x Width x Length Height** Min.-Max. Wt./Each

Part No. Part No.† In. mm In. mm Lbs. kg

DBM-1/2CT B3198HCT-1/2 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.69”-11.19” (246.1-284.2) 2.75 (1.25)

DBM-3/4CT B3198HCT-3/4 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.84”-11.34” (249.9-2288.0) 2.76 (1.25)

DBM-1CT B3198HCT-1 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.95”-11.45” (252.7-290.8) 2.84 (1.29)

DBM-11/4CT B3198HCT-11/4 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.13”-11.63” (257.3-295.4) 2.95 (1.34)

DBM-11/2CT B3198HCT-11/2 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.28”-11.78” (261.1-299.2) 2.96 (1.34)

DBM-2CT B3198HCT-2 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.53”-12.03” (267.4-305.5) 3.03 (1.37)

DBM-1/2 B3198H-1/2 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 9.86”-11.36” (250.4-288.5) 2.78 (1.26)

DBM-3/4 B3198H-3/4 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.06”-11.56” (255.5-293.6) 2.84 (1.29)

DBM-1 B3198H-1 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.14”-11.64” (257.5-295.6) 2.86 (1.30)

DBM-11/4 B3198H-11/4 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.25”-11.75” (260.3-298.4) 2.93 (1.33)

DBM-11/2 B3198H-11/2 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.42”-11.92” (264.6-302.7) 2.99 (1.36)

DBM-2 B3198H-2 4” x 6” x 4.8” (101.6 x 152.4 x 121.9) 10.66”-12.16” (270.7-308.8) 3.10 (1.41)

* General Note: Consult roofing manufacturer or engineer for roof load capacity.

The weakest point may be the insulation board beneath the rubber membrane.

† See Pipe Hanger Catalog for dimensions and specifications. ** From bottom of rubber block to center of pipe/tubing.

DB10-36

DB10-50

DBM-2CT DBM-1

Reference page 196 for general fitting and standard finish specifications.

DURA-BLOK Rooftop Supports

198 Eaton B-Line series strut systems

快速跳转到指定页