Breathing Protection

152

EN149:2001+A1:2009

Respiratory protective devices — filtering half-masks for protection against particles

All uvex respirators are tested and approved in accordance with the European standard 149. This standard sets out a

wide range of requirements for respirators, with the aim of providing the user with the highest level of protection and

comfort.

In addition to the standard tests, all uvex masks fulfil

the additional requirement of the dolomite dust test

and are therefore marked with the letter D.

Therefore the uvex respiratory protection products

ensure an excellent breathability, even in extremely

dusty environments and during prolonged use.

All uvex respirators are in line with current EU legislation. All respiratory protective devices fall into PPE

category III (high risks).

The standard divides respirators into three protection classes according to their

filtering efficiency and leakage:

The key tests defined in EN149 are:

• measuring inhalation and exhalation resistance

• testing the exhalation valve

• visual inspection (marking, instructions for use)

• determining the filtering efficiency (protection class)

• optional: carrying out the dolomite dust test

Detailed information about the

standards and guidelines for respiratory

protection is available at:

https://ures.uvex.de

So that you can see the protection class at a glance, the marking is blue on FFP1 masks, orange on FFP2 masks and

black on FFP3 masks.

FFP 1

FFP 2

FFP 3

* OELs = The occupational exposure limit values (OELs) are the average concentration of a substance in the air in

the workplace, up to which no damage (chronic or acute) is to be expected if employees work there for eight hours a day for five days a week. The OELs

replace the maximum workplace concentration (MWC) and the technical reference concentration (TRC) – however, as long as both of these values are not

yet fully taken into account in the OELs, they can still be used on an interim basis for assessing risks in the workplace.

FFP1 respirators have a filtering capacity of at least 80% and filter

up to four times the respective occupational exposure limit (OEL*).

These masks are suitable for particles that are neither toxic nor

fibrogenic.

FFP2 respirators are suitable for smoke, particles and dusts that

are noxious or harmful to health. They filter at least 94% of particles and can be used up to ten times the respective occupational

exposure limit (OEL*).

With a filtering efficiency of at least 99%, FFP3 masks constitute the highest protection class. They filter up to 30 times the

respective occupational exposure limit (OEL*) and are suitable for

protecting against toxic particles, dusts and smoke.

153

The uvex breathing protection navigator

The fast route to finding the right respirator for your needs

Choosing the right respiratory protective

devices is essential for ensuring the safety

of the respective wearer and is a process

that requires the utmost care.

In order to choose the filtering respirator that

meets your requirements, please observe

the following points:

• the type, composition and concentration of the hazardous

substances must be provided/known (note the CAS number and OEL). The measurement can be carried out by the

employers’ liability insurance association, for example. The

minimum requirements for selected areas of application

can be found on the next page.

• after determining the protection class required (FFP1,

FFP2 or FFP3), the following table can be used to select

a respirator model that meets the requirements of the

respective work conditions.

• there must be a sufficient volume of oxygen in the environment. Please observe the statutory regulations in this

regard. A minimum of 17 vol% is required in Germany.

• if further PPE is required, this must be compatible. uvex

respirators are ideal for use in combination with uvex safety spectacles — see the compatibility table on page 155.

• respiratory protective devices are not suitable for people

with beards, sideburns or deep scars near the respirator

sealing lines as these prevent a secure fit. Please contact

your safety officer for a custom solution.

• Masks marked “NR” should not be used for more than

eight hours. Masks marked “R” may be used for up to

24 hours but must be cleaned after each period of use.

Masks should be replaced without delay if the breathing

resistance becomes noticeably higher.

• if a half-mask with gas filters is required for the workspace, please note that the uvex respirator models do not

offer adequate protection.

Selection

Brief periods of use or lighter activities at normal ambient temperatures

Protection class Folding mask (with or without valve) Cup-style mask (without or without valve)

FFP1 3100, 3110, 8103, 8113, 5100, 5100+, 5110, 5110+ 2100, 2110, 7100, 7110

FFP2 3200, 3210, 8203, 8213, 5200, 5200+, 5210, 5210+ 2200, 2210, 7200, 7210, 7212

FFP3 3310, 8313, 5310, 5310+ 2310, 2312, 7310

Long periods of wear or hard, strenuous activities at increased ambient temperatures

Protection class Folding mask (with valve) Cup-style mask (with valve)

FFP1 3110, 8113, 5110, 5110+ 2110, 7110

FFP2 3210, 8213, 5210, 5210+ 2210, 7210, 7212, 7233, 7232

FFP3 3310, 8313, 5310, 5310+ 2310, 2312, 7310, 7333, 7330, 7312, 7317

With activated carbon layer to protect against unpleasant odours

Protection class Folding mask (with valve) Cup-style mask (with valve)

FFP1 – –

FFP2 3220, 5220+ 2220, 7220

FFP3 5320+ 7320, 2320, 2322

The minimum requirements for selected areas of application can be found on page 154.

154

These filter classes are minimum requirements and simply serve as a guide. It is the wearers’

responsibility to make sure the breathing apparatus conforms to the requirements in terms of

hazardous materials and concentration before use!

Activity Harmful substances Protection class

FFP 1 FFP 2 FFP 3

Wood processing

Softwood: cutting and sanding Fine particles, wood dust ■

Hard wood (oak, beech, tropical woods, etc.): cutting and sanding Fine particles, wood dust ■

Brushing/sanding paint Fine colour particles ■

Brushing/sanding paint (paints containing chrome) Fine colour particles ■

Soluble paints containing copper/chrome/arsenic Fine paint mist ■

Construction and ancillary building industry

Cement work, plastering, tiling, roofing Cement, plaster, tile or brick dust ■

Masonry: cutting, drilling, demolition ■

Asbestos: short periods of work Fibres ■

Roof insulation: glass and mineral fibres Dust and fibres ■

Bodyfillers/stopper: Grinding Dust ■

Welding

Welding aluminium and stainless steel Metal and aluminium oxide fumes ■

Brazing Fumes ■

Metalwork

Metal: drilling, grinding, milling, angle grinding Metal dust ■

High-alloy steels and stainless steels: drilling, grinding, milling, angle grinding Metal dust ■

Waste disposal and cleaning

Refuse separation and disposal Dust, fungi ■

Medical waste disposal Bacteria, spores ■

Sweeping floors Dust (non-toxic) ■

Radioactively contaminated particles Dust ■

Agriculture

Animal epidemics and treatment of animals with diseases Bacteria, viruses ■

Work with fungal spores Spores ■

Work with hay, grain and flour Dust ■

Medicine/care/health

Allergies, pollen, household dust, animal fur Dust, particles, spores ■

Bacteria, viruses, infections, legionella bacteria Bacteria, viruses ■

uvex silv-Air

Areas of application

uvex silv-Air premium 156 - 158

5100, 5100+, 5110,

5110+, 5200, 5200+,

5210, 5210+, 5220+,

5310, 5310+, 5320+

uvex silv-Air e 159 - 161 7212, 7233, 7312,

7317, 7333

7232, 7330

uvex silv-Air c 162 - 165 3100, 3110, 3200,

3210, 3220, 3310

2310, 2312, 2320,

2322

2100, 2110, 2200,

2210, 2220

uvex i-3

uvex i-5

46 - 47

36 - 37

uvex pheos

uvex sportstyle

44 - 45

41

uvex super fit

uvex super g

51

50

uvex x-fit

uvex x-fit pro

39

38

uvex i-vo 52

uvex i-works 48

uvex pheos cx2 42

uvex pheos cx2 sonic 60

uvex super OTG

uvex super f OTG

56

57

uvex astrospec 2.0

uvex skyguard NT

49

53

uvex carbonvision 67

uvex ultrasonic

uvex ultravision

63

64 - 65

uvex megasonic 59

155

Perfect Match

Combination options of uvex silv-Air respirators with uvex safety eyewear

Page

Folding masks

FFP 1, FFP 2, FFP 3

Preformed masks

FFP 1, FFP 2, FFP 3

Preformed masks

FFP 2, FFP 3

Folding masks

FFP 1, FFP 2, FFP 3

Folding masks

FFP 1, FFP 2, FFP 3

Perfect combination Suitable to a limited extent

These recommendations are based

on experience. We recommend always

carrying out wearability tests.

2

4

1

3

5

1 2 3 4 5

156

uvex silv-Air premium

FFP 1 FFP 2 FFP 3

fl at fold fl at fold fl at fold

Small version Large version Small version Large version Small version Large version

5100 NR D 5100+ NR D 5200 NR D 5200+ NR D

5110 NR D 5110+ NR D 5210 NR D 5210+ NR D 5310 NR D 5310+ NR D

5220+ NR D

with carbon

5320+ NR D

with carbon

uvex silv-Air premium

Respirators

• contour-optimised design for maximum wearer

comfort and a secure fi t

• available in two sizes for improved fi t

• sealing lip (in the nose area for FFP1 and FFP2,

in the nose and chin area for FFP3) and nose

clip provide greater comfort and a very secure fi t

• the masks are packaged individually to meet the

highest hygiene requirements

• adjustable textile headband for greater protection and comfort

• optional: exhalation valve for reducing heat and

humidity

• models in FFP2 and FFP3 against unpleasant

odours available (5220+, 5320+)

The extra-wide textile headband ensures that the mask

fits comfortably and securely.

Exhalation valve for reducing

heat and humidity.

The comfortable sealing lip

offers maximum comfort and

a reliable fit.

The masks are packaged

individually and therefore

meet the highest hygiene

requirements.

The nose clip is easy to

adjust, ensuring a particularly

good fit.

157

uvex silv-Air 5100 // 5110

• particle-filtering flat-fold mask for small to medium face shapes

• wide, seamless headband for ensuring a comfortable and secure fit

• incorporated nose clip that is easy to adjust

• comfortable sealing lip in the nose area for a reliable fit

• 5110: exhalation valve for reducing heat and humidity as well as

noticeably reducing breathing resistance

uvex silv-Air 5100+ // 5110+

• particle-filtering flat-fold mask for larger face shapes

• wide, seamless headband for ensuring a comfortable and secure fit

• comfortable sealing lip in the nose area for a reliable fit

• incorporated nose clip that is easy to adjust

• 5110+: exhalation valve for reducing heat and humidity as well as

noticeably reducing breathing resistance

uvex silv-Air 5200+ // 5210+ // 5220+

• particle-filtering flat-fold mask for larger face shapes

• wide, seamless headband for ensuring a comfortable and secure fit

• incorporated nose clip that is easy to adjust

• comfortable sealing lip in the nose area for a reliable fit

• 5210+/ 5220+: exhalation valve for reducing heat and humidity as well

as noticeably reducing breathing resistance

• 5220+: additional activated carbon filter for protection against odours,

gases and vapours under the respective limit values

uvex silv-Air 5200 // 5210

• particle-filtering flat-fold mask for small to medium face shapes

• wide, seamless headband for ensuring a comfortable and secure fit

• incorporated nose clip that is easy to adjust

• comfortable sealing lip in the nose area for a reliable fit

• 5210: exhalation valve for reducing heat and humidity as well as

noticeably reducing breathing resistance

uvex silv-Air 5200+ uvex silv-Air 5210+

Art. no. 8735201 8745201 8735211 8745211

Version FFP 2 NR D folding mask without valve FFP 2 NR D folding mask with valve

– large version – large version

Colour white white

Order quantity BOX BG BOX BG

multiple/ Order unit

Content 30 PC, individually 3 PC, individually 15 PC, individually 3 PC, individually

packed in BOX packed in BG packed in BOX packed in BG

uvex silv-Air premium

Respirators, class FFP 1 and FFP 2

uvex silv-Air 5100 uvex silv-Air 5110

Art. no. 8735100 8745100 8735110 8745110

Version FFP 1 NR D folding mask without valve FFP 1 NR D folding mask with valve

– small version – small version

Colour white white

Order quantity BOX BG BOX BG

multiple/ Order unit

Content 30 PC, individually 3 PC, individually 15 PC, individually 3 PC, individually

packed in BOX packed in BG packed in BOX packed in BG

uvex silv-Air 5200 uvex silv-Air 5210

Art. no. 8735200 8745200 8735210 8745210

Version FFP 2 NR D folding mask without valve FFP 2 NR D folding mask with valve

– small version – small version

Colour white white

Order quantity BOX BG BOX BG

multiple/ Order unit

Content 30 PC, individually 3 PC, individually 15 PC, individually 3 PC, individually

packed in BOX packed in BG packed in BOX packed in BG

uvex silv-Air 5220+

Art. no. 8735221 8745221

Version FFP 2 NR D folding mask with valve and carbon – large version

Colour grey

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, individually packed in BOX 3 PC, individually packed in BG

uvex silv-Air 5100+ uvex silv-Air 5110+

Art. no. 8735101 8745101 8735111 8745111

Version FFP 1 NR D folding mask without valve FFP 1 NR D folding mask with valve

– large version – large version

Colour white white

Order quantity BOX BG BOX BG

multiple/ Order unit

Content 30 PC, individually 3 PC, individually 15 PC, individually 3 PC, individually

packed in BOX packed in BG packed in BOX packed in BG

8735101

8745101

8735111

8745111

8735201

8745201

8735211

8745211

8735221

8745221

8735110

8745110

8735100

8745100

8735200

8745200

8735210

8745210

158

uvex silv-Air premium

Respirators in protection class FFP 3

uvex silv-Air 5310

• particle-filtering flat-fold mask for small to medium face shapes

• wide, seamless headband for ensuring a comfortable and secure fit

• comfortable sealing lip in the nose and chin area for a reliable fit

• incorporated nose clip that is easy to adjust

• exhalation valve for reducing heat and humidity as well as noticeably

reducing breathing resistance

uvex silv-Air 5310+

• particle-filtering flat-fold mask for larger face shapes

• wide, seamless headband for ensuring a comfortable and secure fit

• comfortable sealing lip in the nose and chin area for a reliable fit

• incorporated nose clip that is easy to adjust

• exhalation valve for reducing heat and humidity as well as noticeably

reducing breathing resistance

uvex silv-Air 5320+

• particle-filtering flat-fold mask for larger face shapes

• wide, seamless headband for ensuring a comfortable and secure fit

• comfortable sealing lip in the nose and chin area for a reliable fit

• incorporated nose clip that is easy to adjust

• exhalation valve for reducing heat and humidity as well as noticeably

reducing breathing resistance

• additional activated carbon filter for protection against odours, gases

and vapours under the respective limit values

uvex silv-Air 5310

Art. no. 8735310 8745310

Version FFP 3 NR D folding mask with valve – small version

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, individually packed in BOX 3 PC, individually packed in BG

uvex silv-Air 5310+

Art. no. 8735311 8745311

Version FFP 3 NR D folding mask with valve – large version

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, individually packed in BOX 3 PC, individually packed in BG

uvex silv-Air 5320+

Art. no. 8735321 8745321

Version FFP 3 NR D folding mask with valve and carbon – large version

Colour grey

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, individually packed in BOX 3 PC, individually packed in BG

8735311

8745311

8735310

8745310

8735321

8745321

1 2 3 4 5

1

4 5

2

3

159

uvex silv-Air e

Respirators

Perfectly shaped around the

nose for secure positioning Adjustable headband for

optimum fit

Large inhalation valves

ensure extremely low breathing resistance.

Nasal recess ensures a

perfect fit for almost any

nose shape.

Flexible 4-point headband

attachment for a comfortable

fit.

•high-performance respirator — excellent

protection with maximum wearer comfort

•the combination of a high-quality filter material

and a larger filter surface noticeably reduces

the breathing resistance

•the additional inhalation valves ensure a cool

climate inside the mask (cooling effect)

•3D nose geometry for a perfectly secure fit

•adjustable textile headband for a customised

and comfortable fit

•the integrated sealing lip provides extremely

high comfort

uvex silv-Air e

FFP 1 FFP 2 FFP 3

cup style flatfold cup style

7212 NR D 8313 NR D 7312 R D 7317 R D

7232 R D 7233 R D 7333 R D 7330 R D

160

uvex silv-Air e

High-performance respirators in protection class FFP2 and FFP3

uvex silv-Air High-Performance – A new dimension

in breathing protection

• particle-filtering preformed mask with exhalation

valve and inhalation valves

• High-performance climazone system with three

compartments for a comfortable, cool climate

inside the mask

• flexible textile headband with neck clip for individual adjustment

• exhalation valve for reducing heat and humidity

as well as noticeably reducing breathing resistance

• two extra filters with inhalation valves for lower

breathing resistance and

increased comfort due to easier air exchange

• very soft, all-around sealing lip for optimal wearer comfort and secure fit

• combination of 3D nose area and sealing lip

ensures ideal fit for almost any nose shape

uvex silv-Air 7233 uvex silv-Air 7333

Art. no. 8787233 8787333

Version FFP 2 R D FFP 3 R D

preformed mask preformed mask

with valves with valves

Colour white white

Order quantity BOX BOX

multiples

Content 3 PC, packed in BOX 3 PC, packed in BOX

uvex silv-Air High-Performance – Perfect protection

combined with maximum

wearer comfort

• particle-filtering preformed mask with exhalation

valve and inhalation valves

• High-performance climazone system with three

compartments for a comfortable, cool climate inside the mask

• four-point headband attachment for a comfortable, individual and secure fit

• flexible, adjustable integrated nose clip

• exhalation valve for reducing heat and humidity

as well as noticeably reducing breathing resistance

• two extra filters with inhalation valves for lower

breathing resistance and

increased comfort due to easier air exchange

• very soft, all-around sealing lip for optimal wearer comfort and secure fit

• nasal recess on the sealing lip ensures ideal fit

for almost any nose shape

uvex silv-Air 8313

• particle-filtering flat-fold mask with exhalation valve

• hydrophobic material coating

• four-point headband attachment for a

comfortable, individual and secure fit

• flexible, adjustable integrated nose clip

• very soft, all-around sealing lip for optimal

wearer comfort and secure fit

• exhalation valve for reducing heat and humidity as well as noticeably reducing breathing

resistance

uvex silv-Air 7232 uvex silv-Air 7330

Art. no. 8787232 8787330

Version FFP 2 R D FFP 3 R D

preformed mask preformed mask

with valves with valves

Colour silver grey silver grey

Order quantity BOX BOX

multiples

Content 3 PC, packed in BOX 3 PC, packed in BOX

How-to-use video

uvex silv-Air 8313

Art. no. 8788313

Version folding mask FFP3 NR D with valve

Colour white

Order quantity multiples BOX

Content 15 PC, individually packed in BOX

8787233

8787333 8787232

8787330 8788313

161

uvex silv-Air e

High-performance respirators in protection class FFP2 and FFP3

uvex silv-Air 7312

• particle-filtering preformed mask with

exhalation valve

• soft material edges for increased comfort

• very soft, all-around sealing lip for optimal

wearer comfort and secure fit

• flexible, adjustable integrated nose clip

• four-point headband attachment for a

comfortable, individual and secure fit

• exhalation valve for reducing heat and humidity as well as noticeably reducing breathing resistance

uvex silv-Air 7317

• particle-filtering preformed mask with

exhalation valve

• soft material edges for increased comfort

• very soft, all-around sealing lip for optimal

wearer comfort and secure fit

• without nose clip (metal-free)

• four-point headband attachment for a

comfortable, individual and secure fit

• exhalation valve for reducing heat and humidity as well as noticeably reducing breathing resistance

• extra-wide textile headband ensures that the

mask fits comfortably and securely

uvex silv-Air 7212

• particle-filtering preformed mask with

exhalation valve

• soft material edges for increased comfort

• seamless headband for a comfortable,

secure fit

• very soft, all-around sealing lip for optimal

wearer comfort and secure fit

• flexible, adjustable integrated nose clip

• exhalation valve for reducing heat and humidity as well as noticeably reducing breathing resistance

uvex silv-Air 7317

Art. no. 8787317 8787318

Version FFP 3 R D preformed mask with valve

Colour white

Order unit BOX CT

Content 5 PC, 80 PC, individually

packed in BOX packed in CT

uvex silv-Air 7212

Art. no. 8787212

Version FFP 2 NR D preformed mask with valve

Colour white

Order quantity multiples BOX

Content 15 PC, packed in BOX

uvex silv-Air 7312

Art. no. 8787312

Version FFP 3 R D preformed mask with valve

Colour white

Order quantity multiples BOX

Content 5 PC, packed in BOX

4-point headband attachment for a

comfortable, secure fit of the mask.

Anatomically preformed nose area and integrated

nosepiece within the filter material, ensures a perfect

fit and the highest level of wearer comfort.

The high-quality filter material ensures low breathing

resistance, while the smooth white filter surface reduces

the risk of contamination through “linting” in areas with

strict hygiene standards.

8787212 8787317

8787318 8787312

1 2 3 4 5

1

5

4

3

2

162

uvex silv-Air c

Respirators in protection class FFP1, FFP2 and FFP3

• soft material edges for greater comfort and

wearer acceptance

• continuous textile headband ensures that the

mask fits comfortably and securely

• optional: exhalation valve to reduce heat and

humidity in the mask

• sealing lip (in the nose area for FFP1 and

FFP2, all-round for FFP3) and nose clip provide maximum protection and comfort

• FFP2 and FFP3 models against unpleasant

odours available (2220, 3220, 2320, 2322)

• FFP3 preformed masks are available in two

sizes and also have a four-point headband

attachment

The exhalation valve with a

360° opening ensures very

low breathing resistance

and a cooling effect climate

inside the mask.

The upper face seal offers

both a more secure positioning of the mask and increased wearer comfort.

The soft material edges prevent uncomfortable pressure

points.

The seamless headband can

be adjusted for an optimum

fit.

The adjustable nose clip ensures an excellent individual

fit and secure positioning.

uvex silv-Air c

FFP 1 FFP 2 FFP 3

flatfold

3100 NR D 3110 NR D 3200 NR D 3210 NR D 3220 NR D

with carbon

3310 NR D

cup style

2100 NR D 2110 NR D 2200 NR D 2210 NR D 2220 NR D

with carbon

2310 NR D 2312 NR D 2320 NR D

with carbon

2322 NR D

with carbon

163

uvex silv-Air c

Filtering face masks, protection class FFP 1

uvex silv-Air 3100 // 3110

• particle-filtering folding mask

• seamless headband and flexible, adjustable nose clip

• comfortable sealing lip in nose area for secure fit

• 3110: exhalation valve for reducing heat and humidity as well as

noticeably reducing breathing resistance

uvex silv-Air 2100 // 2110

• particle-filtering preformed mask

• seamless headband and nose clip for a comfortable, secure fit

• comfortable sealing lip in nose area for secure fit

• 2110: exhalation valve for reducing heat and humidity as well as

noticeably reducing breathing resistance

uvex silv-Air 3100

Art. no. 8763100 8743100

Version FFP 1 NR D folding mask without valve

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 30 PC, individually packed in BOX 3 PC, individually packed in BG

uvex silv-Air 3110

Art. no. 8763110 8743110

Version FFP 1 NR D folding mask with valve

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, individually packed in BOX 3 PC, individually packed in BG

uvex silv-Air 2100

Art. no. 8762100 8742101

Version FFP 1 NR D preformed mask without valve

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 20 PC, packed in BOX 3 PC, packed in BG

uvex silv-Air 2110

Art. no. 8762110 8742111

Version FFP 1 NR D preformed mask with valve

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, packed in BOX 3 PC, packed in BG

8763100

8743100

8763110

8743110

8762100

8742101

8762110

8742111

164

uvex silv-Air 3220

Art. no. 8763220

Version FFP2 NR D folding mask with valve and carbon

Colour silver

Order quantity multiple/ BOX

Order unit

Content 15 PC, individually packed in BOX

uvex silv-Air c

Filtering face masks, protection class FFP 2

uvex silv-Air 2200 // 2210

• particle-filtering preformed mask

• seamless headband and flexible, adjustable nose clip for a comfortable,

secure fit

• comfortable sealing lip in nose area for secure fit

• 2210: exhalation valve for reducing heat and humidity as well as

noticeably reducing breathing resistance

uvex silv-Air 2220

• particle-filtering preformed mask with exhalation valve

• additional activated carbon filter against odours, gases and vapours

below threshold

• Seamless headband and flexible, adjustable nose clip for a comfortable,

secure fit

• comfortable sealing lip in nose area for secure fit

• exhalation valve for reducing heat and humidity as well as noticeably

reducing breathing resistance

uvex silv-Air 2220

Art. no. 8762220

Version FFP 2 NR D preformed mask with valve and carbon

Colour silver

Order quantity multiple/ BOX

Order unit

Content 15 PC, packed in BOX

uvex silv-Air 2200

Art. no. 8762200 8742201

Version FFP 2 NR D preformed mask without valve

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 20 PC, packed in BOX 3 PC, packed in BG

uvex silv-Air 3200

Art. no. 8763200 8743200

Version FFP 2 NR D folding mask without valve

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 30 PC, individually packed in BOX 3 PC, individually packed in BG

uvex silv-Air 3210

Art. no. 8763210 8743210

Version FFP 2 NR D folding mask with valve

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, individually packed in BOX 3 PC, individually packed in BG

uvex silv-Air 2210

Art. no. 8762210 8742211

Version FFP 2 NR D preformed mask with valve

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, packed in BOX 3 PC, packed in BG

How-to-use video

uvex silv-Air 3200 // 3210

• particle-filtering folding mask

• seamless headband and flexible, adjustable nose clip

• comfortable sealing lip in nose area for secure fit

• 3210: exhalation valve for reducing heat and humidity as well as

noticeably reducing breathing resistance

uvex silv-Air 3220

• particle-filtering folding mask with exhalation valve

• additional activated carbon filter against odours, gases and vapours

below threshold

• seamless headband and flexible, adjustable nose clip

• comfortable sealing lip in nose area for secure fit

• exhalation valve for reducing heat and humidity as well as noticeably

reducing breathing resistance

How-to-use video

8762200

8742201

8762210

8742211

8763200

8743200

8763210

8743210 8763220

8762220

165

uvex silv-Air 3310

Art. no. 8763310 8743311

Version FFP3 NR D folding mask with valve

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, individually packed in BOX 3 PC, individually packed in BG

uvex silv-Air c

Filtering face masks, protection class FFP 3

uvex silv-Air 3310

• particle-filtering folding mask with exhalation valve

• adjustable headband and flexible, adjustable nose clip for a comfortable,

secure fit

• comfortable, all-around sealing lip for secure fit

• exhalation valve for reducing heat and humidity as well as noticeably

reducing breathing resistance

uvex silv-Air 2310 // 2312

• 2310: particle-filtering preformed mask with exhalation valve for larger

face shapes

• 2312: particle-filtering preformed mask with exhalation valve –

ergonomically adapted for smaller to medium-sized face shapes

• four-point headband attachment and flexible, adjustable nose clip for a

comfortable, secure fit

• very soft, all-around sealing lip for optimal wearer comfort and secure fit

• exhalation valve for reducing heat and humidity as well as noticeably

reducing breathing resistance

uvex silv-Air 2320 // 2322

• 2320: particle-filtering preformed mask with exhalation valve for larger

face shapes

• 2322: particle-filtering preformed mask with exhalation valve – ergonomically adapted for smaller to medium-sized face shapes

• four-point headband attachment and flexible, adjustable nose clip for a

comfortable, secure fit

• very soft, all-around sealing lip for optimal wearer comfort and secure fit

• exhalation valve for reducing heat and humidity as well as

noticeably reducing breathing resistance

• additional activated carbon filter against odours, gases and vapours below threshold values

uvex silv-Air 2312

Art. no. 8762312 8742312

Version FFP3 NR D preformed mask with valve – small version

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, packed in BOX 3 PC, packed in BG

How-to-use video

uvex silv-Air 2310

Art. no. 8762310 8742310

Version FFP3 NR D preformed mask with valve – large version

Colour white

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, packed in BOX 3 PC, packed in BG

uvex silv-Air 2320

Art. no. 8762320 8742320

Version FFP3 NR D preformed mask with valve and carbon – large version

Colour silver

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, packed in BOX 3 PC, packed in BG

uvex silv-Air 2322

Art. no. 8762322 8742322

Version FFP3 NR D preformed mask with valve and carbon – small version

Colour silver

Order quantity multiple/ BOX BG

Order unit

Content 15 PC, packed in BOX 3 PC, packed in BG

8763310

8743311

8762310

8742310

8762312

8742312

8762322

8742322

8762320

8742320

166

uvex silv-Air 9517

Filtering face masks, protection class FFP 2

uvex silv-Air 9517

• particle-filtering flat-fold mask without valve

• comfortable ear bands ensure that the mask fits securely

• flexible, adjustable integrated nose clip

• soft material edges for increased wearer comfort

uvex silv-Air 9517

Art. no. 8739518 8739519

Version FFP2 NR flat-fold mask with ear bands

Colour white white

Order quantity multiples BOX CT

Content 10 PC, individually packed in BOX 1000 PC, individually packed in CT

8739518

8739519

167

uvex medical face mask type IIR

Medical face mask in accordance with EN 14683:2019 + AC:2019

uvex medical face mask type IIR

• medical face mask type IIR for high bacterial

filtering efficiency and protection against liquid splashes

• comfortable ear bands

• adjustable nose wire

• single use for adults

• Made in Germany

• certified medical device

uvex medical face mask type IIR

Art. no. 8739520 8739521 8739522 8739523 8739524

Version Medical face mask type IIR

Colour white beige grey blue green

Order quantity multiples BOX BOX BOX BOX BOX

Content 50 PC, packed in BOX 50 PC, packed in BOX 50 PC, packed in BOX 50 PC, packed in BOX 50 PC, packed in BOX

The face mask is not PPE, but rather a medical device.

Standard EN 14683:2019 + AC:2019

EN 14683 regulates the requirements for medical face

masks. The standard distinguishes between three protection

classes: type I, type II and type IIR.

The classification is based on bacterial filtering efficiency,

microbiological purity, breathing resistance and resistance to

liquid splashes.

Classification Type I Type II Type IIR

Bacterial filtering efficiency (BFE) ≥95% ≥98% ≥98%

Breathing resistance (Pa/cm2) <40 <40 <60

Splash resistance pressure (kPa) not applicable not applicable ≥16.0

Microbiological purity (CFU/g) ≤30 ≤30 ≤30

The uvex face mask corresponds to type IIR and therefore offers the highest level of protection.

8739520

8739521 8739523

8739522 8739524

168

uvex silv-Air Breathing protection

Quick overview of product features

The 360° exhalation valve considerably reduces

breathing resistance and build-up of heat and

moisture in the mask.

Comfortable all-round sealing lip

The soft sealing lip guarantees a secure,

comfortable sealed positioning of the mask.

Soft sealing lip in the nose and chin area

for a secure and comfortable fit.

Comfortable sealing lip in the nose area

The soft sealing lip in the nose area guarantees a

secure, pressure-free fit.

Comfort nose clip

The mask is fitted with a high-quality nose clip

making it individually adjustable.

Metal-free

The mask is completely metal-free and is

manufactured entirely of skin-tolerant materials.

The 4-point headband attachment allows an

individual and secure fit, which can be perfectly

adapted to meet the wearer’s requirements.

uvex clear

• cleaning spray for cleaning respirators marked with “R”

uvex clear cleaning spray

Art. no. 8701011

Order quantity multiples 1 PC

Content 360 ml

The masks are individually packed and meet the

highest standards of hygiene.

Carbon inside

The additional activated carbon layer incorporated

in the filter material reduces unpleasant odours.

The 3D nose area ensures a comfortable fit,

low leakage and prevents misting of uncoated

eyewear.

High performance climate management

The mask offers extremely low breathing resistance due to the filter chambers connected with

the inha lation valve. The climate management of

the high performance mask guarantees optimum

wearer comfort.

R labelling

The mask has been tested for reusability and has

the required performance features for wearing

during a second work shift.

“NR” designation

The masks are not reusable and must therefore be

disposed of after a work shift.

D labelling

The mask has undergone additional dolomite dust

testing and therefore affords excellent

breathability, even in extremely dusty environments and during longer periods of use.

8701011

169

uvex silv-Air

Overview

Art. no. Name Type Features Content per PU PU per

carton Page

8701011 uvex clear cleaning spray 1 can (360 ml) 100 PC 168

8735100 uvex silv-Air 5100 FFP1 folding mask without valve 30 PC 16 boxes 157

8735101 uvex silv-Air 5100+ FFP1 folding mask without valve 30 PC 16 boxes 157

8735110 uvex silv-Air 5110 FFP1 folding mask with valve 15 PC 16 boxes 157

8735111 uvex silv-Air 5110+ FFP1 folding mask with valve 15 PC 16 boxes 157

8735200 uvex silv-Air 5200 FFP2 folding mask without valve 30 PC 16 boxes 157

8735201 uvex silv-Air 5200+ FFP2 folding mask without valve 30 PC 16 boxes 157

8735210 uvex silv-Air 5210 FFP2 folding mask with valve 15 PC 16 boxes 157

8735211 uvex silv-Air 5210+ FFP2 folding mask with valve 15 PC 16 boxes 157

8735221 uvex silv-Air 5220+ with carbon FFP2 folding mask with valve 15 PC 16 boxes 157

8735310 uvex silv-Air 5310 FFP3 folding mask with valve 15 PC 16 boxes 158

8735311 uvex silv-Air 5310+ FFP3 folding mask with valve 15 PC 16 boxes 158

8735321 uvex silv-Air 5320+ with carbon FFP3 folding mask with valve 15 PC 16 boxes 158

8742101 uvex silv-Air 2100, Retail FFP1 preformed mask without valve 3 PC 20 bags 163

8742111 uvex silv-Air 2110, Retail FFP1 preformed mask with valve 3 PC 20 bags 163

8742201 uvex silv-Air 2200, Retail FFP2 preformed mask without valve 3 PC 20 bags 164

8742211 uvex silv-Air 2210, Retail FFP2 preformed mask with valve 3 PC 20 bags 164

8742310 uvex silv-Air 2310, Retail FFP3 preformed mask with valve 3 PC 10 bags 165

8742312 uvex silv-Air 2312, Retail FFP3 preformed mask with valve 3 PC 10 bags 165

8742320 uvex silv-Air 2320 with carbon, Retail FFP3 preformed mask with valve 3 PC 10 bags 165

8742322 uvex silv-Air 2322 with carbon, Retail FFP3 preformed mask with valve 3 PC 10 bags 165

8743100 uvex silv-Air 3100, Retail FFP1 folding mask without valve 3 PC 20 bags 163

8743110 uvex silv-Air 3110, Retail FFP1 folding mask with valve 3 PC 20 bags 163

8743200 uvex silv-Air 3200, Retail FFP2 folding mask without valve 3 PC 20 bags 164

8743210 uvex silv-Air 3210, Retail FFP2 folding mask with valve 3 PC 20 bags 164

8743311 uvex silv-Air 3310, Retail FFP3 folding mask with valve 3 PC 20 bags 165

8745100 uvex silv-Air 5100, Retail FFP1 folding mask without valve 3 PC 20 bags 157

8745101 uvex silv-Air 5100+, Retail FFP1 folding mask without valve 3 PC 20 bags 157

8745110 uvex silv-Air 5110, Retail FFP1 folding mask with valve 3 PC 20 bags 157

8745111 uvex silv-Air 5110+, Retail FFP1 folding mask with valve 3 PC 20 bags 157

8745200 uvex silv-Air 5200, Retail FFP2 folding mask without valve 3 PC 20 bags 157

8745201 uvex silv-Air 5200+, Retail FFP2 folding mask without valve 3 PC 20 bags 157

8745210 uvex silv-Air 5210, Retail FFP2 folding mask with valve 3 PC 20 bags 157

8745211 uvex silv-Air 5210+, Retail FFP2 folding mask with valve 3 PC 20 bags 157

8745221 uvex silv-Air 5220+ with carbon, Retail FFP2 folding mask with valve 3 PC 20 bags 157

8745310 uvex silv-Air 5310, Retail FFP3 folding mask with valve 3 PC 20 bags 158

8745311 uvex silv-Air 5310+, Retail FFP3 folding mask with valve 3 PC 20 bags 158

8745321 uvex silv-Air 5320+ with carbon, Retail FFP3 folding mask with valve 3 PC 20 bags 158

8762100 uvex silv-Air 2100 FFP1 preformed mask without valve 20 PC 12 boxes 163

8762110 uvex silv-Air 2110 FFP1 preformed mask with valve 15 PC 12 boxes 163

8762200 uvex silv-Air 2200 FFP2 preformed mask without valve 20 PC 12 boxes 164

8762210 uvex silv-Air 2210 FFP2 preformed mask with valve 15 PC 12 boxes 164

8762220 uvex silv-Air 2220 with carbon FFP2 preformed mask with valve 15 PC 12 boxes 164

8762310 uvex silv-Air 2310 FFP3 preformed mask with valve 15 PC 12 boxes 165

8762312 uvex silv-Air 2312 FFP3 preformed mask with valve 15 PC 12 boxes 165

8762320 uvex silv-Air 2320 with carbon FFP3 preformed mask with valve 15 PC 12 boxes 165

170

uvex silv-Air

Overview

Art. no. Name Type Features Content per PU PU per

carton Page

8762322 uvex silv-Air 2322 with carbon FFP3 preformed mask with valve 15 PC 12 boxes 165

8763100 uvex silv-Air 3100 FFP1 folding mask without valve 30 PC 12 boxes 163

8763110 uvex silv-Air 3110 FFP1 folding mask with valve 15 PC 12 boxes 163

8763200 uvex silv-Air 3200 FFP2 folding mask without valve 30 PC 12 boxes 164

8763210 uvex silv-Air 3210 FFP2 folding mask with valve 15 PC 12 boxes 164

8763220 uvex silv-Air 3220 with carbon FFP2 folding mask with valve 15 PC 12 boxes 164

8763310 uvex silv-Air 3310 FFP3 folding mask with valve 15 PC 12 boxes 165

8787212 uvex silv-Air 7212 FFP2 preformed mask with valve 15 PC 9 boxes 161

8787232 uvex silv-Air 7232 High-Performance FFP2 preformed mask with three-chamber system 3 PC 12 boxes 160

8787233 uvex silv-Air 7233 High-Performance FFP2 preformed mask with three-chamber system 3 PC 12 boxes 160

8787312 uvex silv-Air 7312 FFP3 preformed mask with valve 5 PC 12 boxes 161

8787317 uvex silv-Air 7317 FFP3 preformed mask with valve 5 PC 12 boxes 161

8787318 uvex silv-Air 7317 FFP3 preformed mask with valve 80 PC 1 carton 161

8787330 uvex silv-Air 7330 High-Performance FFP3 preformed mask with three-chamber system 3 PC 12 boxes 160

8787333 uvex silv-Air 7333 High-Performance FFP3 preformed mask with three-chamber system 3 PC 12 boxes 160

8788313 uvex silv-Air 8313 FFP3 folding mask with valve 15 PC 24 boxes 160

8739518 uvex silv-Air 9517 FFP2 folding mask without valve, with ear bands 10 PC 30 boxes 166

8739519 uvex silv-Air 9517 FFP2 folding mask without valve, with ear bands 1000 PC 1 carton 166

8739520 uvex face mask white uvex medical face mask type IIR 50 PC 20 boxes 167

8739521 uvex face mask beige uvex medical face mask type IIR 50 PC 20 boxes 167

8739522 uvex face mask grey uvex medical face mask type IIR 50 PC 20 boxes 167

8739523 uvex face mask blue uvex medical face mask type IIR 50 PC 20 boxes 167

8739524 uvex face mask green uvex medical face mask type IIR 50 PC 20 boxes 167

Disposable

Protective Clothing

98173 89976 88497 98710 17595 98449 98375 89843 89880

■ ■

■ ■ ■

■ ■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■ ■

■

■

172

uvex 5/6 air

uvex 5/6 air

uvex 5/6 comfort light

uvex 5/6 comfort

uvex 5/6 classic light

uvex 5/6 classic

uvex 4B

uvex 3B chem light

uvex 3B chem classic

Disposable Protection Clothing

Guide to standards and products

EN 14605 Liquid-tight coveralls

EN 14605 Spray-tight coveralls

EN 13034 Limited spray-tight coveralls

(protection against liquid mist)

ISO 13982-1 Particle-tight coveralls

(protection against solid particles)

EN 1149-5 Protective clothing with antistatic properties

(antistatic function only guaranteed if air humidity

> 25%)

EN 14126 Protective clothing against infective agents

EN 1073-2 Protective clothing against

particulate radioactive contamination

(no protection against radioactive rays)

DIN 32781 Protective clothing against

pesticides

ISO 27065 Protective clothing for use with pesticides

Defining environmental conditions

Are you exposed to dusty, damp or wet conditions during your work?

To make it easier for you to select the right clothing for the job, we’ve categorised our

overalls depending on their suitability for these environments. The bars indicate how

suitable the product is for each setting.

We also provide information on breathability so that you can take wearer comfort into

account in your decision.

Identifying additional characteristics

In some work environments, there are additional requirements that you will need to

take into account. These symbols indicate whether the items are free from silicone

and paint wetting impairment substances.

Dust moisture wet Breathing

For more detailed information, please see the relevant certificates, technical data sheets or the endorsement on the product!

173

1

2

3

4

5

uvex SMS

• build out of several layers of polypropylene non woven material

• Mixure of spunbond and meltblown non woven material for a

perfect balance between stability

and softness

• High degree on air permeability

and breathability

uvex Laminat light

• non woven polypropylene material

laminated with a polyethylene film

• non woven material on the inside

for a comfortable feeling

• material is not sticking on skin

• using the film is providing a higher

level of protection, but reduces

the breathability

uvex Laminat classic

• non woven polypropylene material

laminated with a polypropylene

film

• non woven material on the inside

for a comfortable feeling

• material is not sticking on skin

• the polypropylene film provides

an effective barrier against many

organic and inorganic liquid

chemicals

uvex com4-Laminat

• non woven polypropylene material

laminated with a microporous

polyethylene film

• non woven material on the inside

for a comfortable feeling

• material is not sticking on skin

• the microporous film provides a

certain level on breathability

1

3 pieced hood

• optimum fit

• no limitations of view

• perfect match with resirators and goggles

• soft elastic on edge, feels comfortable

2

Zipper flap

• Zipper flap with integrated self adhesive tape

• easy to gum up

• additional security

4

Elastic in waistband

• integrated elastic in waist for optimal fit

• ideal wearer comfort

5

elasticated bands on arm and legs

• convenient closures thanks to elastics at wrist and

ankles for additional security

• soft elastic on edge for high wearer comfort

3

Fingerloop

• finger loops made of soft elastic

• to keep the sleeves at the wrist

• additional security

Disposable protective clothing

Type 4 and Type 5/6 features and technologies

Technologies

174

89880

uvex 3B chem classic

Disposable coverall chemical protection Type 3B

uvex 3B chem classic

General features:

• highly durable material combined with ultrasonically welded and taped seams ensure a

great barrier and maximum of safety

• lightweight and durable material

• skin-friendly textile grip on inside

Protection features:

• offers protection against a wide range of

chemicals

• optimal protection thanks to self-adhesive

zipper flap

Comfort features:

• elasticated waistband, elasticated bands on

hood, arms and legs for a perfect fit

• middle finger loops prevent sleeves sliding up

the arm

Areas of application:

• handling organic and inorganic chemicals

• cleaning and maintenance work

• chemical and pharmaceutical industries

• food industry

• remediation of soil contamination and

dismantling

• industrial cleaning and maintenance

• tank cleaning

• work with paints and varnishes

• disposal of hazardous materials

• agricultural industry

• waste water treatment and drainage

construction

• waste management

• disaster response and emergency services

• veterinary medicine and disease control

• oil and petrochemicals

Certified in acc. with

uvex 3B chem classic

Art. no. 89880

Material polypropylene spunbond, laminated with polypropylene film

Colour yellow

Sizes S to 3XL

Order unit PC

Outer packaging 25 PC per CT

uvex-safety.com/en/overalls

Type 3

EN 14126

TYPE 3B

EN 14605

TYPE 4B

EN 14605

TYPE 5B

ISO 13982-1

EN 1149-5 EN 1073-2

89843 89880

175

89843

uvex 3B chem light

Disposable coverall chemical protection Type 3B

Certified in acc. with

uvex 3B chem light

Art. no. 89843

Material polypropylene spunbond

laminated with polyethylene film

Colour white, yellow

Sizes S to 3XL

Order unit PC

Outer packaging 40 PC per CT

Type 3

uvex 3B chem light

General features:

• light and highly flexible material for high

wearer comfort with skin-friendly non-woven material inside

Protection features:

• ideal for cleaning work

• optimal protection thanks to self-adhesive

zipper flap

Comfort features:

• elasticated waistband, elasticated bands on

hood, arms and legs for optimal fit

• middle finger loops for securing the sleeves

Areas of application:

• handling low-concentration chemicals

• industrial and building cleaning

• ship building and automobile manufacture

• chemical and pharmaceutical industries

• handling paints and varnishes

• electronics

• handling and dismantling of asbestos

• remediation of contaminated sites

• livestock breeding and veterinary medicine

• waste management

The chemicals included in this list are examples only.

For a full overview for each individual garment, please consult the technical datasheets.

You can also search our Chemical Expert System (see page 183).

Chemical CAS no.

Class in acc. EN 14325 Class in acc. EN 14325

Acetone 67-64-1 6 of 6 1 of 6

Acetonnitrile 75-05-8 6 of 6 0 of 6

Iron(III) chloride (aq., 45%) 7705-08-0 – 6 of 6

Hydrofluoric acid (aq., 49%) 7664-39-3 6 of 6 6 of 6

Hydrofluoric acid (aq., 71 to 75%) 7664-39-3 – 5 of 6

Hydrofluoric acid in urea (62 to 64%) 7664-39-3 – 2 of 6

Formaldehyde (aq., 10%) 50-00-0 – 6 of 6

Isopropanol 67-63-0 6 of 6 6 of 6

Methanol 67-56-1 6 of 6 6 of 6

Sodium hydroxide, 50% 1310-73-2 6 of 6 6 of 6

Nitric acid, 69.5% 7697-37-2 – 6 of 6

Hydrochloric acid (aq., 37%) 7647-01-0 5 of 6 6 of 6

Sulphuric acid, 96% 7664-93-9 6 of 6 6 of 6

Hydrogen peroxide 7722-84-1 6 of 6 6 of 6

The information provided in the table was obtained in tests conducted under laboratory conditions (at temperatures of 21 ± 2°C).

As additional stresses, such as higher temperatures and mechanical influences, are often present in practice, these values serve as a guide only.

The information is provided without obligation and is not intended to replace your own suitability tests.

Stitched and taped seams. Optimum protection against penetration by liquid aerosols and

solid particles.

EN 14126

TYPE 3B

EN 14605

TYPE 4B

EN 14605

TYPE 5B

ISO 13982-1

TYPE 6B

EN 13034

EN 1149-5 EN 1073-2 ISO 27065

C3

176

uvex 4B · uvex 3B chem light

Protection against pesticides –

DIN 32781 / ISO 27065

In farming and forestry applications, workers are

repeatedly exposed to hazardous chemical and

biological substances.

Depending on the type of application, the duration of

the exposure and the specific effects of the hazardous

substance, it may be necessary to wear personal protective

equipment.

In addition to respiratory protection and gloves,

appropriate chemical protection clothing is an important

component of the wearer’s protective equipment.

You can find detailed information about

this topic in our related blog post

177

98375 89094

uvex 4B

Disposable coverall chemical protection type 4B

uvex 4B

General features:

• light and highly flexible material for high

wearer comfort lined with skin-friendly

non-woven material inside

Protection features:

• taped seams for optimal protection

• self-adhesive zipper flap for optimal

protection

Comfort features:

• elasticated waistband, elasticated bands on

hood, arms and legs for optimal fit

• middle finger loops prevent sleeves sliding up

the arm

Areas of application:

• low-pressure industrial cleaning and building

cleaning

• ship building and automobile manufacture

• chemical and pharmaceutical industries

• handling paints and varnishes

• agriculture and horticulture

• pest control

• electronics

• work with asbestos and dismantling

• remediation of contaminated sites

• pharmaceutical industry and laboratories

• sampling

• livestock breeding and veterinary medicine

• waste management

uvex 4B uvex 4B with overshoes

Art. no. 98375 89094

Material polypropylene spunbond, laminated polypropylene spunbond, laminated

with polyethylene film with polyethylene film

Colour white, orange white, orange

Sizes S to 3XL S to 3XL

Order unit PC PC

Outer packaging 40 PC per CT 40 PC per CT

Type 4

uvex-safety.com/en/overalls

Certified in acc. with

Stitched and taped seams. Optimum protection against penetration by liquid aerosols and

solid particles.

DIN32781 EN 1149-5 EN 1073-2

EN 14126

TYPE 4B

EN 14605

TYPE 5B

ISO 13982-1

TYPE 6B

EN 13034

178

98449 98759 17595

uvex 5/6 classic

Disposable coverall chemical protection Type 5/6

uvex 5/6 classic

General features:

• extremely lightweight and breathable material

guarantees an excellent combination of

comfort and safety

• skin-friendly and soft non-woven material on

the inside

Protection features:

• self-adhesive zipper flap for optimal

protection

Comfort features:

• elasticated waistband, elasticated bands on

hood, arms and legs for a perfect fit

• middle finger loops prevent sleeves sliding up

the arm

Areas of application:

• handling chemicals in dust and powder form

• varnishing and protection against paint

splashes

• fibreglass production and processing

• industrial cleaning and maintenance

• automotive industry

• grinding and polishing

• cement manufacture

• mining and quarrying

• demolition and refurbishment

• working with asbestos

• wood and metal processing

• construction industry

• pharmaceutical industry

Certifi ed in acc. with

uvex 5/6 classic uvex 5/6 classic mF uvex 5/6 classic light

Art. no. 98449 98759 17595

Material polypropylene spunbond, laminated polypropylene spunbond, laminated polypropylene spunbond, laminated

with polyethylene film with polyethylene film with polyethylene film

Colour white white white

Sizes S to 3XL S to 3XL S to 3XL

Order unit PC PC PC

Outer packaging 50 PC per CT 50 PC per CT 50 PC per CT

Type 5/6

uvex-safety.com/en/overalls

other articles on request

TYPE 5B

EN 14126 ISO 13982-1

TYPE 6B

EN 13034

EN 1149-5 EN 1073-2

179

98710 88497

uvex 5/6 comfort

General features:

• the combination of polyethylene laminate and

a SMS back section provides a high level of

moisture management, without reducing

protection

Protection features:

• 98710: bound seams in contrasting colour

• 88497: with inside overlock seam

• self-adhesive zipper flap for optimal

protection

Comfort features:

• optimal fit with elasticated waistband,

elasticated bands on the hood, arms and legs

• middle finger loops prevent sleeves sliding up

the arm

Areas of application:

• handling chemicals in dust and powder form

• varnishing and protection against paint

splashes

• fibreglass production and processing

• industrial cleaning and maintenance

• automotive industry

• grinding and polishing

• cement manufacture

• mining and quarrying

• demolition and refurbishment

• working with asbestos

• wood and metal processing

• construction industry

• cleanroom applications

• pharmaceutical industry

uvex 5/6 comfort

Disposable coverall chemical protection Type 5/6

Certified in acc. with

uvex 5/6 comfort uvex 5/6 comfort light

Art. no. 98710 88497

Material Main material: polypropylene spunbond, Main material: polypropylene spunbond,

laminated with polyethylene film laminated with polyethylene film

back: SMS spunbond back: SMS spunbond

Colour white, lime white

Sizes S to 3XL S to 3XL

Order unit PC PC

Outer packaging 40 PC per CT 40 PC per CT

88497: Breathable polyethylene laminate

combined with an air permeable SMS back

section to provide a high level of moisture

management and breathability.

98710: Breathable polyethylene laminate

combined with an air permeable SMS back

section to provide a high level of moisture

management and breathability.

Type 5/6

TYPE 5

ISO 13982-1

TYPE 6

EN 13034 EN 1149-5

P

180

98173 89976

uvex 5/6 air

Disposable coverall chemical protection Type 5/6

uvex 5/6 air

General features:

• excellent moisture management

• ideal for warm working environments and

extended periods of wear

Protection features:

• optimal protection in dusty environments

• self-adhesive zipper flap for optimal

protection

Comfort features:

• optimal fit with elasticated waistband,

elasticated bands on hood, arms and legs

• middle finger loops prevent sleeves sliding up

the arm

Areas of application:

• handling chemicals in dust and powder form

• working with asbestos

• fibreglass, ceramic fibre and synthetic resin

production and processing

• wood and metal processing

• construction industry

• automotive industry

• grinding and polishing

• cement manufacture

• mining and quarrying

• refurbishment and renovation

• pharmaceutical industry

• repair work

Certifi ed in acc. with

uvex 5/6 air

Art. no. 98173 89976

Material polypropylene spunbond polypropylene spunbond

Colour white blue

Sizes S to 3XL S to 3XL

Order unit PC PC

Outer packaging 50 PC per CT 50 PC per CT

Type 5/6

uvex-safety.com/en/overalls

TYPE 5

ISO 13982-1

TYPE 6

EN 13034

EN 1149-5 EN 1073-2

181

9875200

8909746

9874946

9874948 9875046

8935346

9875300

8909546

Disposable chemical protection

Accessories

Hood · Gauntlets · Overshoes · Overboots

Hood Gauntlets Overshoes Overboot

Art. no. 9875200 9875300 9874946 9874948 9875046

Sizes one size fits all one size fits all 42 to 46 46 to 48 42 to 46

Version with velcro fastening elasticated band on both ends opening with elasticated band opening with elasticated band and tie

Material polypropylene spunbond, laminated polypropylene spunbond, laminated polypropylene spunbond, laminated polypropylene spunbond, laminated

with polyethylene film with polyethylene film with polyethylene film with polypropylene film

Colour white white white white

Order unit BG BG BG BG

Content 50 PC, loose 50 PR, loose 100 PR, loose 50 PR, loose

Overboot Overshoe with anti-slip Overboots with anti-slip

Art. no. 8935346 8909746 8909546

Sizes 42 to 46 42 to 46 42 to 46

Version opening with elasticated band and tie with anti-slip sole, with anti-slip sole,

elasticated opening elasticated opening with band

improved fit improved fit

Material polypropylene spunbond, laminated polypropylene spunbond, laminated polypropylene spunbond, laminated

with polypropylene film with polyethylene film with polyethylene film

Colour yellow white white

Order unit BG BG BG

Content 30 PR, loose 100 PR, loose 25 PR, loose

182

Disposable chemical protection

Protection against infectious diseases

Workers may come into contact with

biological substances in a wide range of

situations. Appropriate personal protective equipment must be used to prevent

potential infection.

Clothing designed to provide protection against infectious diseases

establishes a physical barrier between the wearer’s skin and the source

of the infection, and prevents the disease from spreading to other

people or environments.

Generally, micro-organisms such as bacteria, fungi and viruses are

classed as biological substances. A detailed defi nition is provided in EU

Directive 2000/54/EC. The crucial common denominator between all

of these materials is that they can cause infections, trigger allergies, or

produce a toxic eff ect.

Biological substances are placed in one of four categories depending

on the infection risk they present:

Risk group 1:

Biological substances that are unlikely to cause disease in humans.

Risk group 2:

Biological substances that can cause human disease and might be a

hazard to workers, but are unlikely to spread to the community; there is

usually eff ective prophylaxis or treatment available.

Risk group 3:

Biological substances that can cause severe human disease and present a serious hazard to workers; they may present a risk of spreading

to the community, but there is usually eff ective prophylaxis or treatment

available.

Risk group 4:

Biological substances that cause severe human disease and are a serious hazard to workers; they may present a high risk of spreading to the

community, and there is usually no eff ective prophylaxis or treatment

available.

The risk groups of each biological substance are described in detail in

the annex to EU Directive 2000/54/EC.

Typical applications in which workers may be exposed to infectious

substances include:

• Waste water treatment and drainage work

• Waste disposal

• Agriculture

• Food industry

• Work that involves contact with animals and/or products of animal origin

• Healthcare, hospitals, emergency services

A detailed list of all biological substances that you may be exposed to in

various applications, and the potential diseases associated with these

substances, can be found in a number of publications, including the

BGIA Report 1/2013.

Protective clothing in accordance with

EN 14126:2003

The EN 14126 standard defi nes the performance requirements for

clothing designed to protect against infectious diseases. The defi ned

test procedures focus on the medium that contains the micro-organisms, such as fl uids, aerosols or solid dust particles. Due to the heterogeneous nature of the micro-organisms, it is not possible to defi ne

performance criteria for them.

The tests stipulated by the standard relate only to the material; seam

technologies are not taken into account. Taped seams provide a higher

level of protection, as the micro-organisms are small enough to penetrate through the tiny needle holes along the seam.

The entire protective suit must also be certifi ed as chemical protection

clothing (see page 183).

Wearing appropriate protective clothing does not provide complete,

guaranteed protection against all chemical risks. It is also essential that

you put on and remove the PPE correctly to ensure safety (see page

184). Any person who assists in the removal of the clothing is also

exposed to the risk of contamination.

Model uvex 3B chem classic uvex 3B chem light uvex 4B uvex 5/6 classic uvex 5/6 classic light

Art. no. 89880 89843 98375, 89094 98449 17595, 17596

ISO/FDIS 16604/16603

Resistance to contaminated liquids 6 of 6 6 of 6 6 of 6 6 of 6 6 of 6

EN 14126 appendix A

Resistance due to mechanical contact with substances

containing contaminated liquids

6 of 6 6 of 6 6 of 6 6 of 6 6 of 6

ISO/DIS 22611

Resistance to contaminated liquid aerosols 3 of 3 3 of 3 3 of 3 3 of 3 3 of 3

ISO/DIS 22612

Resistance to contaminated solid particles 3 of 3 3 of 3 3 of 3 3 of 3 3 of 3

183

https://

ces.uvex.de

Disposable Protection Clothing

Guide to standards and products

Your team’s safety at the forefront

From light liquid splashes to hazardous chemicals and radioactive material — employees face various hazards in the course of their daily work.

To simplify the process of selecting appropriate protective clothing, the

European Union has defi ned harmonised standards for diff erent protection classes (also called types) for chemical protection – Category III.

The protection type is confi rmed by certifi cation and indicates the kind

of exposure (dust, liquid, gas) for which the suit is suitable.

The attainment of the individual types only ensures the minimum

requirements necessary for certifi cation. Please refer to our technical

datasheets for details of the individual tests.

EN 14605 Liquid-tight protective coveralls

(Jet-Test)

EN 14605 Spray-tight protective coveralls

(Spray-Test)

ISO 13982-1 Particle-tight protective coveralls

(protection against solid particles)

EN 13034 Limited spray-tight protective coveralls

(protection against liquid mist)

High

LowProtective grade

Gas-tight

Type 3

Type 4

Type 5/6

For optimum protection of your team at all times, the breakthrough

times of permeation must be taken into account for protective coveralls.

uvex protection clothing has undergone the required permeation tests.

More information on the breakthrough times of specifi c chemicals can

be found in the technical datasheets or in the uvex Chemical Expert

System

Online chemicals database

The uvex Chemical Expert System (CES) off ers an extensive chemicals

database for choosing the appropriate disposable overall for working

with hazardous substances.

As a user, you can create a personal permeation list or receive advice

from our specialists. It only takes a few clicks of the mouse to fi nd the

right disposable safety clothing and chemical safety gloves to match

your specifi c requirements.

The breakthrough times were determined under laboratory conditions.

As additional stresses, such as higher temperatures and mechanical

infl uences, are often present in practice, this information serves as a

guide only. Following contamination, wear or damage, the coverall is to

be removed immediately and properly disposed of.

184

Disposable chemical protection

Guidelines for use

uvex-safety.com/ en/

overalls

Selecting the correct chemical-protection

clothing

In order to select appropriate chemical-protection clothing for a specifi c

application within your business, it is important to have your overalls tested

by a trained safety offi cer. Many chemicals can cause serious or irreversible injury to workers if they are not adequately protected. For this reason,

chemical-protection clothing should be selected with great care.

Note: It is the responsibility of the user to decide for themselves whether

the protective suit used is suitable and correct for the intended use. uvex

accepts no responsibility whatsoever in the event of improper use and

application of these products.

Tips for putting on and taking off Information on selecting the correct size

of disposable protective suit

To ensure an optimum fi t and keep the wearer safe when working with hazardous substances, uvex disposable overalls are available in multiple sizes.

However, the correct size may not be the same as your usual clothing size.

Use the following overview to fi nd the correct fi t based on your height and

chest circumference. 

Proper handling of uvex disposable

protective clothing

Storage

uvex disposable protective clothing must be stored in its original packaging, away from light and in a dry environment at temperatures of 15°C–25°C.

The products must be disposed of after use in accordance with the

respective legal requirements.

Washing disposable protective suits

Disposable overalls are for single use only and must not be washed.

Durability

It is recommended to use the product within fi ve years from the production

date, which can be found on the label.

Instructions for

putting on

Instructions for

taking off

Instructions

for putting on/

taking off

Instructions for putting on and taking off Type 5/6 (PDF)

Instructions for putting on and taking off Type 3B (PDF) Body height in cm Chest circumference in cm Size to choose

164 - 170 cm 84 - 92 cm S

170 - 176 cm 92 - 100 cm M

176 - 182 cm 100 - 108 cm L

182 - 188 cm 108 - 116 cm XL

188 - 194 cm 116 - 124 cm XXL

194 - 200 cm 124 - 132 cm XXXL

Safety Gloves

186

protecting planet

uvex Bamboo TwinFlex®

D xg planet

To help raise awareness of its commitment to achieving increased

sustainability, uvex has developed the protecting planet icon.

For uvex, protecting planet is more than a label. Based on the brand claim, protecting people,

our sustainable approach integrates three core interlinked pillars — ecology, economy and

social responsibility, that are incorporated throughout the business to improve our sustainability

performance.

This explains the comprehensive audit, measurement and evaluation management process uvex

undertakes along the entire value chain to ensure its products are as sustainable as possible.

by using environmentallyfriendly packaging

by having a

CO2 neutral production

by using bio-based material //

by using recycled material //

by maximum reduction of pollutants

187

The uvex Bamboo TwinFlex® D xg

planet is an example of the

planet series product system.

The glove packaging has been minimised signifi -

cantly. Paper wrap is used instead of rubber bands

to secure bundles. Polyester bags have not been

used by uvex in it’s glove packaging for over 11

years.

By using bamboo viscose uvex is utilising a renewable raw material and recycled polyamide. Together,

these sustainable materials account for 45 percent

of the material used. The gloves also off er greater

protection to the health of the wearer than stipulated

by REACH regulations as they comply with the uvex

list of banned substances and the skin compatibility

has been dermatologically approved by the proDERM

institute.

Bamboo TwinFlex® technology is a registered brand of UVEX SAFETY Gloves GmbH & Co. KG., Germany.

uvex safety gloves is certifi ed according to both Environmental

Management ISO 14001 and Energy Management ISO 50001 and has

CO2-neutral production rating based on direct emissions from production. To achieve this, we have been sourcing electricity from 100 percent

renewable energy sources since 2014, and through the certifi ed green

electricity product we have been promoting the construction of new

renewable energy plants in the region. We use green gas to operate

the highly effi cient CHP plant at our site, thereby off setting the CO2

emissions produced by gas combustion processes. Through carbon

off setting, we invest exclusively in climate protection projects that are

certifi ed by internationally recognised quality standards (Gold Standard

or VCS (Verifi ed Carbon Standard)) and thereby promote, for example,

the construction of new plants in India for the generation of solar and

wind power.

188

Innovative safety gloves “Made in Germany”

Manufacturing and technology expertise

uvex hand protection centre of expertise in Lüneburg

A fully integrated development process, state-of-the-art robot-controlled plant technology

and strict production controls guarantee that our safety gloves are of fi rst-class quality.

Production in Germany ensures sustainable, resource- saving production and short distances from manufacturer to end user.

Sustainable production:

• CO2-neutral production  

• Solvents and plasticisers not used in production

• Sustainable environmental and energy management

(ISO 14001/ISO 50001)

• Made locally in Germany

Social responsibility:

• Full implementation of the ILO standard

• Continuous social audits at partner companies

(uvex social standard)

• Social engagement with a focus on disadvantaged children

Health:

• Over-compliance with REACH regulations on eliminating harmful

substances

• Ongoing analysis of almost 200 critical substances

(uvex harmful substances standard)

• Certifi ed in line with Oeko-Tex® Standard 100

• DERMA-certifi ed free from allergenic substances

Comfort:

• Extremely comfortable thanks to the use of breathable natural and

functional fi bres

• Optimum tactile feel thanks to an ergonomic fi t

• Natural feel against the skin

Detailed information on the award criteria applied by the certification bodies

OEKO-TEX® and proDERM can be found at: uvex-safety.com/certificates

Environmental

management

Quality

management

Energy

management

Optimum tactile feel thanks to an ergonomic fi t

Natural feel against the skin

Video

189

Extensive know-how is part of our service

Service expertise

We know exactly what you want.

Our expertise is available for you at all times which forms the basis of our on-site.

Risk-hazard analysis service: Our hand protection specialists work with you to determine

which safety gloves are best suited to your individual requirements. Seminars, laboratory

analyses and online tools round off our service portfolio.

Consultation / training / application

technology

• on-site consultation from uvex product specialists

• practical hand protection seminars (uvex academy)

• plant and laboratory tours for customers

• cooperation with scientifi c institutes

• measurement and analysis service in own laboratories

– mechanical standard test in accordance with EN 388

– permeation tests in accordance with EN 374

– special tests (e.g. antistatic/grip measurement/

climate test)

• individual certifi cations (e.g. for ingredients, coating

compatibility, food product suitability)

Information / e-services

• Chemical Expert System (CES)

• designer glove plan

• online glove navigator

• online product data sheets

• online declaration of conformity

For further information, please visit:

www.uvex-safety.de/usglfi lm

Fully integrated development processes

• own yarn/liner manufacturing

• own compounding (blending)

• specially developed moulding and process technology

• innovative coating technology

• development of customer-specifi c solutions

• technical modifi cations to existing products

(e. g. thermal lining)

• individual production (e. g. gloves for disabled people)

190

Safety Gloves

Precision work

uvex phynomic uvex rubipor

Page 200 Page 201 Page 201 Page 201 Page 202 Page 202 Page 202 Page 203 Page 203 Page 204 Page 204 Page 205 Page 205

uvex

phynomic

airLite A ESD

uvex

phynomic

foam

uvex

phynomic

allround

uvex

phynomic

XG

uvex

phynomic

x-foam HV

uvex

phynomic

wet

uvex

phynomic

wet plus

uvex

phynomic

pro

uvex

phynomic

pro 2

uvex

phynomic

lite

uvex

phynomic

lite w

uvex

rubipor XS

uvex

rubipor XS

uvex athletic uvex unilite uvex unipur uvex unigrip

Page 205 Page 206 Page 206 Page 206 Page 207 Page 207 Page 207 Page 208 Page 208 Page 208 Page 209 Page 209 Page 209 Page 209

uvex

athletic

allround

uvex

athletic

lite

uvex

athletic

lite ESD

uvex

athletic lite

dry

uvex

unilite

6605

uvex

unilite

7700

uvex

unipur

6634

uvex

unipur

6630

uvex

unipur

6631

uvex

unipur

6639

uvex

unipur

carbon

uvex

unipur

carbon FT

uvex

unigrip

6624

uvex

unigrip

6620

Allround Heavy Duty Heat protection

uvex profi

Page 210 Page 210 Page 210 Page 211 Page 211 Page 211 Page 212 Page 212 Page 212 Page 212 Page 213 Page 213 Page 213

uvex

contact

ergo ENB20C

uvex

profi ergo

ENB20A

uvex

profi ergo

ENB20

uvex

profi ergo

XG20A

uvex

profi ergo

XG

uvex

glove clip

uvex

rubiflex

uvex

unilite

7710 F

uvex

compact

NB27E

uvex

compact

NB27H

uvex

nk

uvex

k-basic

extra

uvex

profatherm

Cold protection Working on live parts

uvex unilite thermo

Page 214 Page 214 Page 214 Page 214 Page 215 Page 215

uvex unilite

thermo

uvex unilite

thermo

plus

uvex unilite

thermo

HD

uvex unilite

thermo plus

cut c

uvex power

protect

V1000

uvex

arc protect

g1

Mechanical Risks / Special risks

191

Chemical Risks

Safety gloves with textil support - Coating: Nitrile Cut protection

uvex rubiflex uvex u-chem uvex protector

Page 232 Page 232 Page 232 Page 233 Page 233 Page 236 Page 234 Page 234 Page 234 Page 235 Page 238 Page 238

uvex

rubiflex S

uvex

rubiflex SZ

uvex

rubiflex SZ

uvex

rubiflex

S XG

uvex

rubiflex S

uvex

rubiflex

ESD

uvex

u-chem

3300

uvex

u-chem

3200

uvex

u-chem

3100

uvex

u-chem

3500

uvex

protector

chemical

uvex

protector

chemical

Safety gloves without textil support Disposable safety gloves HexArmor gloves

uvex u-fit

Page 239 Page 239 Page 237 Page 237 Page 241 Page 241 Page 241 Page 241 Page 246 - 255

uvex

profastrong

NF33

uvex

profapren

CF33

uvex

profabutyl

B-05R

uvex

profaviton

BV-06

uvex u-fit

strong

N2000

uvex

u-fit

uvex

u-fit ft

uvex

u-fit lite

Safety Gloves

Cut protection

uvex phynomic uvex athletic uvex unidur

Page 224 Page 225 Page 225 Page 225 Page 226 Page 226 Page 227 Page 228 Page 228 Page 228 Page 229 Page 229 Page 227 Page 227

uvex

phynomic

airLite B ESD

uvex

phynomic

airLite C ESD

uvex

phynomic

C3

uvex

phynomic

C5

uvex

athletic B

XP

uvex

athletic

C XP

uvex

athletic D5

XP

uvex

unidur

6641

uvex

unidur

6648

uvex

unidur

6649

uvex

unidur

6643

uvex

unidur

6659 foam

uvex

unidur

sleeve C

uvex

unidur

sleeve C TL

Cut protection

uvex D500 / uvex C500 uvex C500 uvex C300

Page 219 Page 220 Page 220 Page 221 Page 221 Page 221 Page 221 Page 222 Page 222 Page 222 Page 223 Page 223 Page 223

uvex Bamboo

Twinflex®

D xg

uvex

D500

foam

uvex

C500

M foam

uvex

C500

sleeve

uvex

C500

uvex

C500

wet plus

uvex

C500

XG

uvex

C500

dry

uvex

C500

foam

uvex

C500

wet

uvex

C300

dry

uvex

C300

foam

uvex

C300

wet

192

Table of contents

Standards and product advice

International standards for safety gloves

We help you choose the right safety gloves for your needs

uvex – consultation and product expertise from a single source

International standards for safety gloves Page

DIN EN 388:2016-03 Safety gloves to protect against mechanical risks 194

DIN EN ISO 374-1:2018-10 Safety gloves to protect against dangerous chemicals and micro-organisms 195

DIN EN 16350:2014-07 Safety gloves to protect against electrostatic characteristics 197

DIN EN 60903:2003 Live working - Gloves of insulating material 197

DIN EN 61482-1-2:2015-08 Working with high voltage - Clothing that protects against the thermal hazards

of an electric arc – part 1–2 197

DIN EN 407:2020-06 Safety gloves and other protective hand equipment designed to protect against

thermal risks (heat and/or fire) 196

DIN EN 511:2006-07 Safety gloves to protect against the cold 196

Suitable for use with foods (glove materials) 194

Discover all our helpful services on our website Page

1

uvex Glove Navigator

- The fast route to finding the right gloves for you 230

2

uvex Chemical Expert System

- Chemicals database, permeation lists

- uvex glove plan designer

230

193

Contents

Pictograms

Mechanical protection

Working with chemicals

Cut protection

Special risks (e.g. heat protection)

Precision

All-round

Heavy duty Dry Light moisture/oily Wet/oily

Detailed information on the award criteria of the certificate issuers can be found at:

uvex-safety.com/certificates

Textiles tested for pollutants Produced in Germany Breathability for high wearer comfort

Dermatologically tested for skin compatibility Can be used with touchscreens

Bamboo TwinFlex® technology for safety

(cut protection) and comfort (bamboo fibre)

These pictograms

in our catalogue help you to choose

the perfect safety glove.

1. Select the risk potential

What is the main risk for users in the workplace?

3. Defining environmental conditions

Are the activities in wet/oily or more humid or dry

working environments?

The bars indicate how suitable the product is for each

setting.

2. Determine your individual

requirements

What type of activity are the safety gloves being

selected for?

194

Standards

EN 388:2016+A1:2018

f Impact protection (P if passed)

e Cut resistance in accordance with ISO (A to F)

d Puncture resistance (0 to 4)

c Tear resistance (0 to 4)

b Coup test cut resistance

(0 to 5; X = not applicable or not tested)

a Abrasion resistance (0 to 4)

Suitability grades

Safety gloves for working with food must be designed in such a way

that absolutely no components can be transferred to food which may

pose a hazard to human health (migration) under

normal and predictable conditions.

Area of application Aqueous pH > 4.5 Acidic pH < 4.5 Alcoholic Fatty Dry, non fatty

Examples Non-alcoholic

beverages

Fruit

Eggs

Vegetables

Crustaceans

Vinegar

Yeast

Milk

Yoghurt

Wine

Spirits

Liqueurs

R1 = olive oil

R2 = butter, margarine

R3 = fish, cheese,

baked goods

R4 = meat, poultry

R5 = sandwiches

fried food

Bread

Pasta

Rice

Tea

Spices

Pulses

uvex Bamboo TwinFlex® D xg YES YES YES YES (R1 – R5) YES

uvex phynomic airlite A ESD YES YES YES YES (R1 – R5) YES

uvex profi ergo/ uvex contact ergo YES YES YES YES (R1 – R5) YES

uvex phynomic C3/ uvex phynomic C5 YES YES YES YES (R1 – R5) YES

uvex rubiflex und uvex rubiflex S YES YES YES YES (R1 – R5) YES

uvex profastrong NF 33 YES YES YES YES (R2 – R5) YES

uvex u-fit YES YES YES YES (R3 – R5) YES

uvex phynomic foam YES YES YES YES (R5) YES

uvex phynomic lite (w) YES YES YES YES (R1 – R5) YES

uvex unilite thermo YES YES YES NO YES

uvex u-fit strong N2000 YES NO YES YES (R3 – R5) YES

uvex u-fit lite YES NO YES YES (R3 – R5) YES

uvex u-chem 3300 YES YES YES YES (R2 – R5) YES

Standard for safety gloves to protect

against mechanical risks

EN 388:2016 contains various test methods for comparing the mechanical performance of gloves. This standard focusses on the following six

performance levels:

a Abrasion resistance

To test the abrasion resistance of the safety glove, the material is

rubbed with abrasive paper under pressure. The number of cycles

required to grind a hole into the material is used as a reference

value. (Highest performance class 4 = 8000 cycles)

b Cut resistance by means of the coupe test

A rotating circular knife is used to test the cut resistance of a safety

glove. The knife cuts through the glove material at constant speed

and constant force. The reference value is the comparison with a

reference material and a resulting index.

(Highest performance class 5 = index 20)

c Tear resistance

To test the tear resistance of the safety glove, the material is first

cut. The reference value is the force required to tear the material.

(Highest performance class 4 = 75 newtons)

d Puncture resistance

To test the puncture resistance, the material to be tested is pierced

with a nail (defined dimension). The force used for this is used as a

reference value.

e Cut resistance according to TDM

The application of the test method in accordance with ISO 13997

is relevant for materials that blunt the rotating circular knife during

the coupe test (see above). The required force for cutting a material

is measured at a defined distance (20 mm) (highest performance

class F= 30 newton)

f Additional impact protection

Gloves with performance class “P” at the end offer specific impact

absorption.

4 X 3 2 D P

EN 388:2016

Video

195

Permeation resistance of

type A:

at least 30 minutes each with

at least 6 test chemicals.

Permeation resistance of

type B:

at least 30 minutes each with

at least 3 test chemicals.

Permeation resistance of

type C:

at least 10 minutes each with

at least 1 test chemical.

With the uvex Chemical Expert System, uvex provides a multilingual,

online platform to search for individual permeation times. In addition,

experienced staff are available on-site and in the centre of expertise for

safety gloves in Lüneburg to provide advice on all questions relating to

safety gloves for protection against chemical risks.

Your uvex account manager will be happy to provide advice.

Labelling on the glove

Labelling of safety gloves

Labelling of safety gloves

Permeation

1 Name of the manufacturer

2 Glove Product Name

3 Performance classes, mechanical

4 CE conformity mark

5 No. of Test Institute

6 Letters symbolise test chemicals

against which the glove has a

protection index of at least class 2.

7 Pictogram with designation of

standard

8 Note enclosed instructions for use

9 Glove size

10 Expiration date

11 Manufacturer address

Permeation refers to molecular penetration through the safety glove

material. The time required by the chemicals to permeate, determines

the performance class in accordance with EN ISO 374-1.

The actual period of protection at the workplace may vary depending

on real-time process factors.

Time measured to penetration Protection index

> 10 min Class 1

> 30 min Class 2

> 60 min Class 3

> 120 min Class 4

> 240 min Class 5

> 480 min Class 6

EN ISO 374-1:2018

Standard for safety gloves to protect

against chemical risks

Chemical safety gloves must meet the requirements of European standard EN ISO 374-1. This standard has undergone fundamental changes in

terms of certification.

Test chemicals: From the list of 18 test chemicals, the glove material

must be tested for permeation as part of the certification process using

6, 3 or 1 chemical(s), depending on the type class.

DIN EN 374-5: 2016

Standard for safety gloves to protect

against dangerous chemicals and

micro-organisms

To protect against microorganisms such as bacteria, fungi and viruses,

safety gloves must undergo and pass special penetration tests in

accordance with ISO 16604:2004 (method B). Only then may they be

marked with the pictogram for EN ISO 374-5.

Variant 2:

Protects against bacteria

and fungi

Variant 1:

Protects against bacteria,

fungi and viruses

Standards

EN ISO 374-1:2018 · DIN EN 374-5:2016

Identifier Test chemical Group Class

A Methanol

polar*

Primary alcohol

B Acetone Ketone

C Acetonitrile Nitrile

G Diethylamine Amine

H Tetrahydrofuran Heterocyclic, ether compounds

I Ethyl acetate Ester

T Formaldehyde 37% Aldehyde

E Carbon disulphide Sulphur-containing organic

compound

J n-heptane aliphatic*

F Toluene aromatic*

D Dichloromethane halogenated* Chlorinated

L Sulphuric acid 96%

Acids

Inorganic acid, oxidising

M Nitric acid 65% Inorganic acid, oxidising

N Acetic acid 99% Organic acid

S Hydrofluoric acid 40% Inorganic acid

K Sodium hydroxide 40%

Bases (alkalis)

Inorganic base

O Ammonia water 25% Organic base

P Hydrogen peroxide 30% Peroxide (bleach) Peroxide

* Solvents (hydrocarbons (KWS))

J K L M N O

EN ISO 374-1:2016/Type A

Virus

EN ISO 374-5:2016

J K L

EN ISO 374-1:2016/Type B

EN ISO 374-5:2016

EN ISO 374-1:2016/Type C

10 9

11

1

2

3

5

4

7 8

6

196

Standards

EN 407:2020 · DIN EN 511:2016

DIN EN 407:2020

Standard for safety gloves providing

protection against thermal risks — heat

The European standard DIN EN 407 regulates the requirements for

safety gloves that provide protection against thermal risks in applications involving heat. Safety gloves certifi ed according to this standard

protect the wearer against contact heat, radiant heat and small splashes of molten metal, for example.

However, this does not apply to the specifi c use of safety gloves in

fi refi ghting. According to DIN EN 407, heat protection gloves must have

the following features:

• low fl ammability and low fl ame propagation

• low heat transmission (protection against radiant,

convective and contact heat)

• high temperature resistance

The test described in DIN EN 407 assigns safety gloves a performance

class in relation to each of the individual thermal hazards. It is important

that the glove does not come into contact with open fl ames if it does

not meet the criteria of performance class 3 in the limited fl ame spread

test.

Permeability to water (0 to 1)

Resistance to contact cold (0 to 4)

Resistance to convective cold (0 to 4)

Resistance to large quantities

of molten metal (0 to 4)

Resistance to small splashes

of molten metal (0 to 4)

Resistance to radiant heat (0 to 4)

Resistance to convective heat (0 to 4)

Resistance to contact heat (0 to 4)

Flame resistance (0 to 4)

DIN EN 511:2006

Standard for safety gloves providing

protection against thermal risks — cold

Cold safety gloves must meet the requirements of the European standard DIN EN 511. The certifi ed gloves below are designed to protect the

wearer from penetrating ambient cold and from contact cold through

direct contact.

Gloves can also be tested for water impermeability in accordance with

EN ISO 15383, thus enabling them to protect the hands from wetness

and moisture. This test is considered to have been passed if water does

not penetrate the safety glove over a 30-minute period.

As with mechanical risk protection, the safety glove is assigned a different performance class for each individual aspect. The performance

classes are indicated by a number from 0 to 4 next to the pictogram,

whereby 4 is the highest performance class.

Important changes to standards!

In the latest version of DIN EN 407: As of 2020, the first performance

class is no longer named “resistance to flammability”, but is now called

“limited flame spread”. If the glove has not been tested for this, a new pictogram is used (see above right). However, there are no changes to the

performance classes.

EN 511

4 2 3 3 4 2 0 1 0

EN 407 EN 407

X 2 3 3 4 1

197

DIN EN 16350:2014

Safety gloves –

Electrostatic characteristics

The new standard

Choosing the right personal protective equipment (PPE) is particularly important in working environments that are hazardous or harbour

health risks. For workplaces at risk of fire and explosive atmospheres,

“EN 16350:2014 – Protective gloves – electrostatic properties” is the

first European standard to prescribe the test conditions and minimum

requirements for electrostatic properties of safety gloves.

vertical resistance must be less than 1.0 × 108 Ω

(Rv < 1.0 × 108 Ω).

test atmosphere: ambient temperature of 23 ± 1 °C, relative humidity

of 25 ± 5%.

Important notice:

Electrostatic discharge safety gloves are only effective if the wearer

is grounded with resistance of less than 108 Ω.

What should users take into account?

EN 16350:2014 is the first standard to define a limit value for vertical

resistance for protective gloves; this value was not included in DIN EN

1149.

Users must therefore check the suitability of the protective gloves in

line with EN 16350:2014.

References to EN 1149 are no longer sufficient, as this standard only

describes the testing procedure and does not specify a limit value.

More on

this topic:

Standards

DIN EN 16350:2014 · DIN EN 60903:2003 · DIN EN 61482-1-2:2015-08

DIN EN 60903:2003

Live working –

Gloves made from insulating material

DIN EN 60903-compliant safety gloves are category iii PPE. The insulation protection class of the insulating personal protective equipment

(PPE) is determined according to the nominal voltage of the plant, with

both the maximum permissible nominal AC voltage (AC) and the nominal DC voltage (DC) being calculated.

DIN EN 61482-1-2:2015-08

Live working - Protective clothing against

the thermal hazards of an electric arc

Part 1–2: Test methods – Method 2:

Determining the arc protection class of the material and the clothing

using a directed test arc (box test)

Hands are at the greatest risk of burns from short circuit electric

arcs when working on electrical equipment. Unfortunately, there is

no recognised standard for safety gloves in Germany for testing the

potential dangers of a short circuit electric arc. Therefore, safety gloves

for protection against the thermal discharge of a short circuit electric

arc are generally tested in accordance with EN 61482-1-2 and classified

accordingly.

Labelling of safety gloves

Additional identifier

Insulation protection

class

Max. permissible nominal AC voltage (AC)

Max. permissible nominal

direct voltage (DC)

00 500 volts 750 volts

0 1,000 volts 1,500 volts

1 7,500 volts 11,250 volts

2 17,000 volts 25,000 volts

3 26,500 volts 39,750 volts

4 36,000 volts 54,000 volts

Class Test current

[kA]

Arcing time

[ms]

Arc energy

[kJ]

Incident energy

[kJ/m2]

1 4 500 168 +/- 17 146 +/- 28

2 7 500 320 +/- 22 427 +/- 39

Category Resistant to

A Acids

H Oil

Z Ozone

C Extremely low temperatures

DIN EN 60903

Class 0

R

198

Mechanical Risks

Area of application: precision/all-round

Activities where a high level of sensitivity

is necessary.

Examples: fi ne assembly work, working

with small parts (e. g. screws), operating

controls, end inspection.

Tough activities requiring highly robust,

abrasion resistant safety gloves.

Examples: heavy transport work (e. g.

palette transport), construction, servicing.

General, multiple activities for which

robust, stable safety gloves are required.

Examples: servicing, transport work, light

metal processing, standard assembly

work, maintenance.

Precision All-round Heavy duty

dry light moisture / oily wet / oily

Working areas which do not have any moisture (water, oil, fat, cooling lubricant, etc.).

Safety gloves for these conditions are extremely breathable.

Examples: quality control, assembly work, distribution, end processing.

Working areas with some moisture. Safety gloves for these conditions are less breathable. The water/oil-repelling coating

is crucial and also guarantees slip-resistance.

Examples: oil-coated parts, changing between dry and damp working environments.

Working areas in which hands should be protected from liquids (not chemicals). Sealed safety gloves with high slip-resistance

are necessary.

Examples: removing oily/wet parts from machines, outdoor activities (weather-related humidity).

uvex

unipur

range

uvex

rubipor

range

uvex phynomic

foam

uvex profi ergo

uvex

profi XG

uvex

compact

uvex unilite

thermo HD

uvex unilite

thermo

uvex contact ergo

uvex phynomic

allround

uvex phynomic

pro

uvex

phynomic

lite/lite w

uvex phynomic wet

uvex phynomic

wet plus

uvex phynomic

XG

uvex

phynomic

airLite A

ESD

uvex athletic

lite

uvex unilite

thermo plus c

uvex

rubifl ex NB27

uvex

7710 F

uvex phynomic

pro 2

uvex athletic

lite ESD

uvex athletic

lite dry

199

uvex phynomic

Perfection in

3 dimensions

1. Perfect fit

3D ergo technology –

precision all the way to the fi ngertips

• Ergonomic solution for every wearer:

up to 8 perfectly coordinated sizes

• The advantages for the wearer:

• the glove fi ts like a second skin

• natural touch

• maximum fl exibility for fatigue-free work

2. Optimum functionality

Coatings perfectly adapted

to the application at hand

• for dry areas:

aqua-polymer waterproofi ng

• for dry and slightly damp areas: aquapolymer foam coating

• for humid and oily areas:

aqua-polymer xtra grip foam coating

• for wet and oily areas:

aqua-polymer pro coating

• for applications with industrial touchscreen

monitors: airLite aqua-polymer foam

coating***

3. Skin safe – product safe

Enhanced skin care and

product protection

Health protection

• no skin irritation

• dermatologically approved*

• certifi ed in accordance with OEKO-TEX®

Standard 100

• free from harmful solvents (DMF, TEA)

• free from allergenic substances

Product protection

• silicone-free according to imprint test

• suitable for sensitive surfaces

• does not leave any traces/marks

• certifi ed for food processes**

* The uvex phynomic series was clinically tested by the proDERM® Institute for Applied Dermatological Research (Hamburg, Germany). The extremely good skin tolerability of uvex phynomic safety gloves has been dermatologically tested

(proDERM® studies: 11.0356-02, 11.0482-11, 13.0202-02, 15.0188-02, 15.0219-11).

Detailed information on the award criteria applied by the certification bodies

OEKO-TEX® and proDERM can be found at: uvex-safety.com/certificates

** Models uvex phynomic lite/lite w, uvex phynomic foam, uvex phynomic C3 and phynomic C5

*** Models uvex phynomic airLite A ESD, uvex phynomic airLite B ESD, uvex phynomic airLite C ESD

200

uvex phynomic airLite A ESD

Art. no. 60038

Design knitted cuff

Standard EN 388 (3 1 1 0 X), EN 16350

Material polyamide, elastane, carbon

Coating palm and fingertips with

airLite aqua-polymer coating

Suitable for for dry and slightly damp areas of application

Colour black

Sizes 6 to 12

Order quantity multiples 10 PR

Mechanical Risks

Area of application: precision/all-round

uvex phynomic airLite A ESD

• the lightest safety glove in its class

• ESD function (DIN EN 16350:2014)

• a noticeable difference in wearer comfort: combination of high

sensitivity and tactile feel, lightness and breathability

• touchscreen compatibility for use on almost all screens, tablets and

mobile phones

• thin and breathable “airLite” aqua-polymer coating combines the

highest sensitivity and tactile feel with touchscreen compatibility

• very good grip in dry and slightly damp areas

• free from accelerators, health protection and skin compatibility dermatologically approved (proDERM®), highly suitable for allergy sufferers

• certified according to OEKO-TEX® Standard 100

(S02-0648 HOHENSTEIN HTTI)

An intelligent future

More and more companies are integrating intelligent

methods into their production process. The digitalisation

of industrial production (Industry 4.0.) is still on its way.

You will be equipped for the future with the uvex phynomic

airLite A ESD thanks to its touchscreen compatibility for

use on almost all screens, tablets and mobile phones.

This applies to all products marked

with this symbol.

Health protection and the latest

uvex coating technology

The newly developed “airLite” aqua-polymer coating in combination with a high-quality liner (18 gauge) offers not only

touchscreen compatibility but also the highest sensitivity

and tactile feel for precision work when handling very small

or fine components. 

It has also been tested by the proDERM® institute in an

elaborate user-study process and its skin compatibility has

been dermatologically approved.

The uvex phynomic airLite ESD range also offers

gloves with cut protection in Cut Level B and C.

See page 224/225 for details.

You can find more

information at

www.uvex-safety.com/

airlite

60038

3 1 1 0 X

EN 388:2016 EN 16350:2014