16Pcs Electrician Repair Tools Set

25PCS Home Repair Tools Set

06 Torque Tools

Booher· Choice of industry

Booher provides users with more professional methods of tightening fasteners, More importantly, we provide the right solutions.

Booher has a wide range of torque tools for selections, no matter torque screwdrivers or professional torque verification equipment, we have the right product to meet your needs.

Durability accuracy is the most important test of torque products. Due to the many moving parts and spring structure, normal torque tool will deviate from the preset torque after a certain numb er of times, and the accuracy will be reduced.

The patented design of the innovative structure, invented by Steve Booher, founder of Booher, dramatically reduces the number of moving parts, resulting in improved endurance accuracy of the torque tool, even after more than 5,000 uses, the accuracy is dtill up to standad...

Innovative structure patent design

发明专利证书

Intelligent Torque Control system

Data acquisition

Obtain t he automatic transmission of mass production bodyinformation (VIN code) by single device,collect the operation resuts of each single device (tightening data, time,station ID, tightening tool ID), and make OK/NG judgment.

Quality traceability function

●The operation data of single equipment can be automaticallycollcted and stored, and the vehice qultyinformation can be queried or traced in real time,and the historicalreport and analysis report can be automaticallygenerated

Tightening navigation system

Provide station navigation equipmentto navigate station tightening and show the results.

Provide station monitoring

●It can monitor the operating status and faut infomation of the equipment, and automatically calculate theproduction time, actual production time, faut time, equipment star-up 'rate, etc. and automaticaygeneratereports

Booher Intelligence

Torque control system

Intelligent Torque Control System

• Suitable for torque measurement in measuring room

• A test bench capable of simulating fasteners under all conditions

• Tool test: wrench (digital display, dial,preset), pneumatic, electric and lithium torque tools, pulse tools (punch Except wrench)

• Statistical process control: Measuring machine performance (Cm, Cmk) and X,R charts

• Quick and eas y setup

• Click the wrench click point automatic detection function

• Compare te st capabilities

• Enter test parameters and run 30% faster than any other comparable workbench on the market

• Fully customized hardware, sensor configuration,statistical reporting

• Robust design, less maintenance

Intelligent Torque Control System

• Flexible, modular production system for tightening torque control on production lines.

• Multi-piece error prevention program on the production line

• Error prevention progr am for parts on the production line

• Temporary replacement of faulty power tools to minimize downtime.

• Third-party DC power tool con trollers are available

• Custom plug-in communication features

• Ability to use multiple tools at the same tme, including manual and electric

torque setting tools

• The new split type digital display torque tester is novel, compact, conven

ient to carry, suitable for the torque detection of workshop stations

• It can detect the precision of digital display torque wrench, mechanical torque wrench and dial type torque wrench

• The use of special design sensor, special structure design, high precision, repeatability stability

• The electronic system adopts the latest software design, which has the characteristics of accuracy, stability and multi-function

• Torque accuracy ± 0.5%, large display design, digital intuitive clear, easy observation and operation

• Operation mode provides peak hold (P) and follow mode (T)

• There are 6 LED indicators on the front of the display, which can be displayed by the LED indicator and matched with the sound of the peaker.

To judge whether the preset torque value is reached

• Multiple torque unit options: Nm, Lb.ft, Lb.in, Kg.cm

• With simple operation buttons, you can easily operate: switch on and off, zero, unit selection, lock setting and correction setting and other functions

Digital Torque Tester

Digital Torque Tester

• Integrated structure, easy to carry, suitable for quick torque detection in workshop work

• Multiple functions, 10 sets of torque values can be preset

• Large screen LED display, clear reading value

• Multiple torque unit switching: N.m, ft.Ib, in.lb, kg.cm

• Can store 2000 data

• Operation mode provides peak hold (P) and follow mode (T)

• Integrated structure, easy to carry, suitable for quick torque detection in workshop work

• Multiple functions, 10 sets of torque values can be preset

• Large screen LED display, clear reading value

• Multiple torque unit switching: N.m, ft.Ib, in.Ib, kg.cm

• Can store 2000 data

• Operation mode provides peak hold (P) and follow mode (T)

Digital Torque Screwdriver

1/4"BITS of different head shapes can be configured to fit different screws

• Three units are available: cNm/In.Ib/Kg.cm

• Operation mode: Peak hold (P) and follow mode (T) available

• Accuracy is guaranteed within the range of 20-100% torque value, the forward operation accuracy is ±3%/±2.5%, and the reverse operation accuracy is ±4%/±3.5%

Mini Digital Torque Wrench With Bits Hold Head)

The ratchet head has a quick shedding device, which can improve the work efficiency. The reversing valve can be easily reversed by flipping, and the forward or reverse operation can be realized. The one-hand operation is more convenient

• Four units are available: N.m/In.Ib/Ft.Ib/Kg.cm

• Operation mode: Peak hold (P) and follow mode (T) available

Mini Digital Torque Wrench

• Accuracy is guaranteed in the range of 20-100% torque value, the accuracy of forward operation is ±3%, and the accuracy of reverse operation is ±4%

Digital Torque Wrench-Interchangeable Head

The sealed flipped ratchet head can be easily reversed by flipping the reversing valve to achieve forward or reverse operation, and one-hand operation is more convenient

• Four units are available: Nm/CN.m/In.Ib/Kg.cm

• Two modes of operation are provided: peak hold (P) and follow mode (T)

• Accuracy is guaranteed within the range of 20%-100% torque value, and the forward operation accuracy is ±3% or the reverse operation a ccuracy is Plus or minus 4%

Replaceable head design, torque wrench head square hole dimensions are: 9x12 concave square head, 14x18 concave square head, users can freely replace the plug-in according to the use of demand

• Four units are available: Nm/In.Ib/Ft.Ib/Kg.cm

• Two modes of operation are provided: peak hold (P) and follow mode (T)

• Accuracy is guaranteed within the range of 20%-100% torque value, and the forward operation accuracy is ±2% or reverse

• The operating accuracy is ±3%

• A factory verification report is included with each torque wrench

• Products with forward operation accuracy of ± 1% or reverse operation accuracy of ± 2% can be customized according to requirements

The sealed flipped ratchet head can be easily reversed by flipping the reversing valve to achieve forward or reverse operation, and one-hand operation is more convenient

• Available units: 1/4"-3/4" : Nm/In.Ib/Ft.Ib/Kg.cm 1" : Nm/ ft.Ib

• Two modes of operation are provided: peak hold (P) and follow mode (T)

• Accuracy is guaranteed within the range of 20%-100% torque value, an d the forward operation accuracy is ±2%/±2.5% or the reverse operation precision The degree is ±3%/±3.5%

• A factory verification report is included with each torque wrench

• Products with forward operation accuracy of ± 1% or reverse operation accuracy of ± 2% can be customized according to requirements

• Four units are available: Nm/In.Ib/Ft.Ib/Kg.cm

• Two modes of operation are provided: peak hold (P) and follow mode (T)

• Accuracy is guaranteed within the range of 20%-100% torque value, and the forward operation accuracy is ±2% or the reverse operation accuracy is Plus or minus 3%

• A factory verification report is included with each torque wrench

The sealed flipped ratchet head can be easily reversed by flipping the reversing valve to achieve forward or reverse operation, and onehand operation is more convenient

• Four units to choose from: Nm /. In the lb/Ft. Lb/Kg. The cm/Degree • Two modes of operation are provided: peak hold (P) and follow mode (T) • Accuracy is guaranteed within the range of 20%-100% torque value, an d the forward operation accuracy is ± 2% or reverse

• The operating accuracy is ±3%

• A factory verification report is included with each torque wrench

• Products with forward operation accuracy of ± 1% or reverse operation accuracy of ± 2% can be customized according to requirements

Digital torque adjustable wrench integrated innovative design with adjustable wrench as the head form, can adapt to more stations

• Four units are available :Nm/In.lb/Ft.Ib/Kg.cm

• Two modes of operation are provided: peak hold (P) and follow mode (T)

• Accuracy is guaranteed within the range of 20%-100% torque value, the accuracy of forward operation is ±3%, and the accuracy of reverse operation is Plus or minus 4%

• A factory verification report is included with each torque wrench

Digital Torque Wrench

Tape data storage

The sealed flipped ratchet head can be easily reversed by flipping the reversing valve to achieve forward or reverse operation, and one-hand operation is more convenient

• Available units: 1/4"-3/4" : Nm/In.Ib/Ft.Ib/Kg.cm 1" : Nm/ ft.Ib

• Two modes of operation are provided: peak hold (P) and follow mode (T)

• Accuracy is guaranteed in the range of 20%-100% torque value, the acc uracy of forward operation is ±2%/±2.5% or the accuracy of reverse opera tion is ±3%/±3.5%

• A factory verification report is incl uded with each torque wrench

• Products with forward operation accuracy of ± 1% or reverse operation accuracy of ± 2% can be customized according to requirements • Store 50 sets of data, USB can not connect to the computer

Digital Torque Wrench

Tape data storage

Wired output

The sealed flipped ratchet head can be easily reversed by flipping the reversing valve to achieve forward or reverse operation, and one-hand operation is more convenient

• Available units: 1/4"-3/4" : Nm/In.Ib/Ft.Ib/Kg.cm 1": Nm/ ft.Ib

• Two modes of operation are provided: peak hold (P) and follow mode (T)

• Accuracy is guaranteed within the range of 20%-100% torque value,

and the forward operation accuracy is ±2%/±2.5% or the reverse operation precision The degree is ±3%/±3.5%

• A factory verification report is included with each torque wrench

• Products with forward operation accuracy of± 1% or reverse operation

accuracy of ± 2% çan be customized according to requirements • Store 250 sets of data and connect to a computer

Digital Torque Wrench

Tape data storage

Wired output

The sealed flipped ratchet head can be easily reversed by flipping the reversing valve to achieve forward or reverse operation, and one-hand operation is more convenient

• Available units: 1/4"-3/4" :Nm/In.Ib/Ft.Ib/Kg.cm 1" : Nm/ ft.lb

• I wo moues oi operauon are proviueu; peak noiu (r) anu iollow oue (1) • Two modes of operation are provided: peak hold (P) and follow mode (T)

• Accuracy is guaranteed in the range of 20%-100% torque value, the acc uracy of forward operation is ±2%/±2.5% or the accuracy of reverse opera tionis ±3%/±3.5%

• A factory verification report is included with each torque wrench

• Products with forward operation accuracy of ± 1% or reverse operation accuracv of+2% can be customized accordina to requirements

• Store 250 sets of data and connect to a computer

Digital Torque Wrench

• Connected to the computer via a USB cable, a wireless receiver can recei ve data from ten wireless wrenches.

• Use 433MHz wireless channels (including 432.0, 432.2, 432.4, 432.6, 4 32.8, 433.0, 433.2, 433.3)

• 300m straight line barrier-free transmission distance. (The wireless tr ansmission distance may be shortened depending on the environment.)

• Receive data into the database and provide statistical query function, q uery results can be printed or exported to Microsoft Excel

Digital Torque Wrench

Digital Torque Wrench

• Four units are available: N.m,in-Ib,ft-lb,kgm

• Two modes of operation: T (tracking), P (peak holding)

• Easy to install accurate calibration methods

• Light buzzer dual signal torque signal

• Three minutes no operation automatic shutdown

• Battery: 2xAAA

• Four units are available: N.m,in-lb,ft-Ib,kgm

• Two modes of operation: T (tracking), P (peak holding)

• Portable and accurate calibration

• Light buzzer dual signal torque signal

• Three minutes no operation automatic shutdown

• Display accuracy: forward ±1.5%, reverse ±2%

• Battery: 2xAAA

Compact structure, simple operation, the square hole is the input end, the square head is the output end, with related tools and simple accessories can be operated

When the torque value is set, there are two tips: Twelve red and green LED lights on the front:

Green light - warning signal, about to reach the set torque value Red light - stop signal, has reached the set torque value

• Buzzer alarm warning: short ringing - about to reach the set torque value Chirping - has reached the set torque value Two modes of operation are provided: peak hold (P) and follow mode (T)

• Each torque wrench has a unique product serial number, easy to follow the tide

• Selection of the raw data, five units: Nm/In. Lb/Ft. Lb/Kg. The cm/Degree

• The new multi-functional digital display Angle torque wrench can set the torque value and angle value, both positive and negative can be operated. It can completely replace the traditional Angle gauge. Forward operation accuracy is ± 3%, reverse operátion accuracy is ± 4%

• Digital display torque value output

• Reversible operation (can be displayed on LCD display)

• There are two modes of peak hold and real-time display available. When the preset torque is reached, the buzzer and LED indicator will alarm at the same time.

• The explicit unit can be switched between kg-cm, kg-m, ft-Ib, in-Ib, and N-m.

• The display direction of the LCD screen can be switched forward and b ackward according to requirements. The display can be rotated up to 240° for easy viewin • The percentage of the preset torque value can be displayed during use. After 3 minutes of unused use, the quantity torque meter will go into sleep mode to save b After 3 minutes of unused use, the quantity torque meter will go into sleep mode to save b • Accuracy error ±2%, score accuracy 0.1Nm

ElectromechanicaAngle-contrlled TorqueWrench

• With display and trip function.

• Tighten clockwise and counterclockwise.

• The USB port is used for data output.

• Up to 2000 sets of data can be stored

• Sense the tightening situation visually and aural.

• The length of the interchangeable plug-in can be adjusted to easily calculate the new torque value when the interchangeable plug-in needs to be extended.

• Three functional modes: Peak mode (display peak reading), trace mode (display real-time values) and trip mode

• Measurement unit: N m, in Ib, ft Ib, kgm.

• Four measurement methods (torque,Angle, angular supplementary torque,torque supplementary Angle).

• Fully automatic calibration and adjustment function, no need to rely on any software, and four-digit password protection.

• When a preset torque value is reached, the torque wrench will trip and notify the user with a tactile and audible signal.

• Calibration is automatically notified after a full year or 5000 uses of the wrench from the date of calibration.

• The maximum torque value generated by the wrench (after calibration) can be recorded.

• The wrench battery is removable, with 18650 lithium battery, connected with SM connector, and can be charged online.

• TFT color screen

• Torque Angle values can be represented by Pointers, numbers or graphs

• Both directions can be operated

• Beep and LED light warning when the set torque value or Angle value is reached (up to 10 sets of torque values can be preset)

• Up to 50,000 data stores

• Functions are presented in the form of drawings for users to choose from

• 5 measurement units (N.m,in.Ib,ft.Ib,kg.cm)

• Automatic shutdown time can be adjusted (preset after 120S idle)

• Use rechargeable lithium battery modules

• Torque accu racy: ±2%

• Angular accuracy ±2° (Angle measurement accuracy at 90°persecond at 30°)

EletromechanicalAngle-controlled Torque Wrench

• With display and trip function.

• Tighten clockwise and counterclockwise.

• The USB port is used for data output.

• Can store up to 2000 sets of data.

• Sense the tightening situation visually and aural.

• The length of the interchangeable plug-in can be adjusted to easily calculate the new torque value when the interchangeable plug-in needs to be extended.

• Three functional modes: Peak mode (display peak reading), trace mode (display real-time values) and trip mode.

• Measurement unit: Nm, inlb, ftlb, kgm.

• Four measurement methods (torque, Angle, angular supplementary torque, torque supplementary, Angle).

• Fully automatic calibration and adjustment function, no need to rely on any software, and four-digit password protection.

• When a preset torque value is reached, the torque wrench will trip and notify the user with a tactile and audible signal.

• The maximum torque value generated by the wrench (after calibration) can be recorded.

• Calibration is automatically notified after a full year or 5000 uses of the wrench from the date of calibration.

• The wrench battery is removable, with 18650 lithium battery, connectedwith SM connector, and can be charged online.

• Two color insulation injection molding. In accordance with DIN EN 6789; En/IE

C 60900 standard. Each pass 10000V high voltage measurement type,

Ensure that it is used in 1000V scenarios.

• Unit of measurement: N.m,in.lb,ft.lb,kg.m

• Two operating modes: T(tracking) and P(peak holding)

• Light buzzer dual signal torque signal

• Convenient and accurate calibration, can be used in both directions

• Three minutes no operation automatic shutdown, save power

• Battery model: 2xAAA

• Torque accuracy: positive +3%, positive and negative reverse 3%

A1000V

a) Ratchet Head: Chromium-vanadium alloy steel brings better strength and life cycle.

b) 90 Teeth Ratchet.

c) Accuracy of torque + /-4%; quality meets DIN ISO 6789.

c) Each piece stamping ID number for traceability.

2Unique quick precision adjustment hole design eliminates the need to damage the insulating layer of the product.

3 Window Display: Easy readable scale below a window.
4 Easy torque-adjusting design. Lock mechanism: Pull the end cap down to "unlock" the wrench for torque setting; release cap to “lock".

• Release accuracy tolerance ±4 of scale value.

• Individually tested at 10,000 V, insulation up to 1000 V.

• Range up to 200 Nm.

• According to DIN EN/IEC 60900.

Micrometer Torque Wrench

• The error accuracy is ±4%, which meets ISO6789, ASMEB107.14 and GB/T 15729

• With a unique design, the precise torque output can be stabilized without zeroing after use

• Flat body design, high torque load, suitable for narrow space use

• Products with ±3% or higher accuracy can be customized according to requirements

Micrometer Torque Wrench-Interchangeable Head

Micrometer Torque Wrench

• The error accuracy is ±4%, which meets ISO6789, ASMEB107.14
and GB/T 15729

• With a unique design, the precise torque output can be stabilized without zeroing after use

• Flat body design, high torque load, suitable for narrow space use

• Products with ±3% or higher accuracy can be customized according to requirements

• Flat body design, can be used in narrow situations, no need to zero after use

• Specially designed structure, when the preset torque value is reached,

the wrench will make a click

• The body is Cr-Mo alloy steel, the handle is aluminum alloy knurled design, with anti-slip, anti-oil, durable functions

• Torque error ± 4%, in accordance with ASME/ISO/GB standards, and attached calibration report

• Suitable for 9x12mm concave square head, users can freely replace the lug-in according to use requirements

• Products with ±3% or higher accuracy can be customized according to requirements

• Flat body design, can be used in narrow situations, no need to zero after use

• Specially designed structure, when the preset torque value is reached,

the wrench will make a click

• The body is Cr-Mo alloy steel, the handle is aluminum alloy knurled design, with anti-slip, anti-oil, durable functions

• Torque error ± 4%, in accordance with ASME/ISO/GB standards, and attached calibration report

• Suitable for 9x12mm concave square head, users can freely replace the plug-in according to use requirements

• Products with ± 3% or higher accuracy can be customized according to requirements

Preset Torque Wrench-Interchangeable Head

• The torque value of the wrench can be fixed according to the requireme nts of the user's station within the torque range

• Since the torque value is fixed before leaving the factory, it can effectively prevent users from improper operation and greatly improve work efficiency • Constant torque wrenches are widely used in the production lines of manufacturing plants

• Specially designed structure, when the fixed torque value is reached, the wrench will make a clicking sound

• Flat body design, can be used in narrow situations

• Torque error ± 4%, in accordance with ASME/ISO/GB standards, and attached calibration report

• Suitable for 9x12,14x18 concave square head, users can freely replace the plug-in according to the needs of use

• Products with ± 3% or higher accuracy can be customized according to requirements

Preset Torque Wrench-Fix Ratchet Head

• The torque value of the wrench can be fixed according to the require ments of the user's station within the torque range

• Since the torque value is fixed before leaving the factory, it can effectively prevent users from improper operation and greatly improve work efficiency

• Constant torque wrenches are widely used in the production lines of manufacturing plants

• Special specifications can be customized according to the needs of users

• 50 teeth ratchet head, flat body design, 7 °Angle operation, suitable for narrow applications

• Specially designed structure, when the fixed torque value is reached, the wrench will make a clicking sound

• Torque error ± 4%, in accordance with ASME/ISO/GB standards, and attached calibration report

• Products with ± 3% or higher accuracy can be customized according to requiremen

Micrometer Torque Wrench

• The error accuracy is ±4%, which meets ISO6789, ASMEB107.14 and GB/T 15729

• With a unique design, the precise torque output can be stabilized without zeroing after use

• Flat body design, high torque load, suitable for narrow space use

• Products with ± 3% or higher accuracy can be customized according to requirements

• Flat body design, can be used in narrow situations, no need to zero after use

• Specially designed structure, when the preset torque value is reached, the wrench will make a click

• The body is Cr-Mo alloy steel, the handle is aluminum alloy knurled design, with anti-slip, anti-oil, durable functions

• Torque error ± 4%, in accordance with ASME/ISO/GB standards, and attached calibration report

• Suitable for 9x12mm concave square head, users can freely replace t he plug-in according to use requirements

• Products with ± 3% or higher accur acy can be customized according to requirements

Dial Torque Wrench

• Dial for easy reading

• The units of measurement are imperial and metric

• The memory pointer (blue needle) holds the peak reading

• in the range of 20% to 100% full scale, the bidirectional accuracy is ± 3% • Suitable for 14x18mm concave square head, users can freely replace the plug-in according to use requirements

• Meet the requirements of technical indicators of measuring instruments verification regulation JJG707-2012

Dial Torque Wrench

• Dial for easy reading

• The units of measurement are imperial and metric

• The memory pointer (blue needle) holds the peak reading

• In the range of 20% to 100% full scale, the bidirectional accuracy is ± 3%

• Meet the requirements of technical indicators of measuring instruments verification regulation JJG707-2012

Torque Wrench

• The scale is displayed by the LCD screen, which is convenient for customers to adjust the observation

• Accuracy is better than mechanical torque wrench, up to 2 %

• Can be displayed from a lower torque value (10% full degree)

• A variety of torque units are displayed and can be switched arbitrarily

Torque Wrench

• The scale is displayed by the LCD screen, which is convenient for customers to adjust the observation

• Accuracy is better than mechanical torque wrench, up to 2%

• Can be displayed from a lower torque value (10% full degree)

• A variety of torque units are displayed and can be switched arbitrarily

• Clear scale window, let a person at a glance

• Ergonomic handle for comfortable grip

• Lightweight push-pull locking device, easy to operate, to ensure the stability of the set value

• Pear-shaped head two-way ratchet, easy to reverse

• Slightly longer than the general torque wrench, long time work less effort Uynuy onyur uun uv yunorur ryuu wrunvn, ony unu wum ou unun

• Torque error ± 3%, in accordance with ASME/ISO/GBstandards, and atta ched calibration report

• Clear scale window, let a person at a glance

• Lightweight push-pull locking device, easy to operate, to ensure the stability of of the set value

• Ergonomic handle for comfortable grip

• Pear-shaped head two-way ratchet, easy to reverse effort

• Slightly longer than the general torque wrench, long time work less

• Torque error ±3%, in accordance with ASME/ISO/GB standards, and attached calibration report

Torque Wrench

• Clear scale window, let a person at a glance

• Ergonomic handle for comfortable grip

• Lightweight push-pull locking device, easy to operate, to ensure the stability of the set value

• Pear-shaped head two-way ratchet, easy to reverse

• Slightly longer than the general torque wrench, long time w ork less effort

• Torque error±3%, in accordance with ASME/ISO/GB standards, and attached calibration report

Metric one-way ratchet head

• Clear scale window, let a person at a glance

• Ergonomic handle for comfortable grip

• Lightweight push-pull locking device, easy to operate, to ensure the stability of the set value

• Pear-shaped head two-way ratchet, easy to reverse

• Slightly longer than the general torque wrench, long time work less effort

• Torque error ±3%, in accordance with ASME/ISO/GB standards,

and attached calibration report

Torque Wrench

• All metal construction, strong and durable

• Alloy steel pipe, clear scale, easy to read

• There is a small scale indication of 1/10 of the unit main scale

• The main and secondary scales have male and imperial references

• The push-pull locking device at the upper end of the handle reliably locks the required torque

●Torque accuracy: ±3%

Torque Wrench

• All metal construction, strong and durable

• Alloy steel pipe, clear scale, easy to read

• There is a small scale indication of 1/10 of the unit main scale

• The main and secondary scales have male and imperial references

• The push-pull locking device at the upper end of the handle reliably locks

the required torque

• Torque accuracy: ±4%

\*单位为 Lb,in

Toruque Wrench

• All metal construction, strong and durable

• Alloy steel pipe, clear scale, easy to read

• There is a small scale indication of 1/10 of the unit main scale

• The push-pull locking device at the upper end of the handle reliably locks

the\_required torque

• Torque accuracy: ±3%

Torque Wrench

• The desired torque value can be set by the user

• The only torque setting point, can not adjust the torque value at wil

• Accuracy is ± 3% of read value block ( ± 4% above 500Nn)

• A variety of head forms can meet the needs of different working conditions

Torque Wrench

• All metal construction, strong and durable

• The alloy steel pipe has a clear scale. Easy to read

• There is a small scale indication of 1/10 of the unit main scale

• The main and secondary are engraved with metric and imperial references

• Accuracy is ± 3% of read value block (± 4% above 500Nn)

• The push-pull locking device at the upper end of the handle can reliably lock the required torque

• The reasonable anti-slip groove arrange

play your grip strength

ment on the handlebars can better

• A variety of head forms can meet the needs of different working condition

Torque Wrench

• All metal construction, strong and durable

• The alloy steel pipe has a clear scale. Easy to read

• There is a small scale indication of 1/10 of the unit main scale

• The main and secondary are engraved with metric and imperial references

• Accuracy is ± 3% of read value block (± 4% above 500Nn)

• The push-pull locking device at the upper end of the handle can reliably lock the required torque

• The reasonable anti-slip groove arrangement on the handlebars can better play your grip strength

• A variety of head forms can meet the needs of different working condition

Metric square hole head

Torque Wrench

Cylindrical head

• The ratchet sliding mechanism ensures that the control bolts are securely

tightened and not overloaded

• TPR handle for comfortable grip

• The head is made of aviation aluminum, light and strong

• Torque accuracy: ±6%

• Use a special tool to set the torque value before use

Torque Wrench

• Integrated aluminum alloy overall design, light and strong

• Reversible dual drive head design

• Unique window structure, clear reading value

• Unique end locking design

• Torque accuracy: ±4%

Preset Torque Screwdriver

• According to DIN EN ISO 6789

• Torque error ± 6%.

Preset Torque Handle

• According to DIN EN ISO 6789

• Torque error ± 6%.

Adjustable Torque Screwdriver

• According to DIN EN ISO 6789

• Torque error ± 6%.

Preset Torque Screwdriver with T-Bar

• According to DIN EN ISO 6789

• Torque error ± 6%.

Dial Torque Screwdriver

• According to DIN EN ISO 6789

• Torque error ± 6%.

Fitting

Toruque Screwdriver

• Head 1/4" hexagonal quick release head cartridge sleeve design, easy to replace various batch heads

• The front end large hexagonal locking structure, pull out the adjust ment torque; Push lock

• Clear scale, high resolution, accurate reading value

• 1/4" square hole at the end to insert T-rod for tightening large torque screws

• Ergonomic two-color handle, soft and hard, comfortable to feel

• The use of durable engineering plastics, oil resistant, non-slip

• Torque accuracy: ±6%

Toruque Screwdriver

• Head 1/4" hexagonal quick release head cartridge sleeve design, easy to replace various batch heads

• The front end large hexagonal locking structure, pull out the adjust ment torque; Push lock

• Clear scale, high resolution, accurate reading value

• 1/4" square hole at the end to insert T-rod for tightening large torque screws

• Ergonomic two-color handle, soft and hard, comfortable to feel

• The use of durable engineering plastics, oil resistant, non-slip

• Torque accuracy: ±6%

Rectangular Ratchet Head

• The material is Cr-V alloy steel, the surface is sandblasted

and chrome plated

• Made of precision machining, durable

• Easy to change the head, especially suitable for use in small Spaces

Rectangular Adjustable Spanner

• Easy to change the head, wide applicability

• Made of precision machining, durable

• Easy to change the head, wide applicability

Fitting

• The material is Cr-V alloy steel, the surface is sandblasted and chrome plated

• Made of precision machining, durable

• Easy to change the head, wide applicability

Please read the operation manual.

◇ Only use a correctly verified torque wrench.Treat the torque wrench like a test deviceand store it carefully.

◇ Use torque wrench within allowable range.

◇ When a "click" sound is felt and heard,stop operation immediately

◇ Hold the connection bolt at thecorrect Angle using a torque wrench.

◇Use only suitable wrench heads and accessories.If possible, do not use large to small reducer.

◇ Do not use torque wrench to remove bolts.

◇Do not use a torque wrench as a hammerAfter finishing the work, adjust to the minimumvalue.

◇ Do not use defective or old accessories.

◇Useunused attachments.

◇ Try to use one hand in the handle position.

• The material is Cr-V alloy steel, the surface is sandblasted and chrome plated

• Made of precision machining, durable

• Easy to change the head, especially suitable for use in small Spaces

• Made of precision machining, durable

• The material is Cr-V alloy steel, the surface is sandblasted and chrome plated

• Easy to change the head, especially suitable for use in small Spaces

Rectangular Ring End Fitting

• The products are customized products with delivery date

• Made of precision machining, durable

• Easy to change the head, especially suitable for use in small Spaces