该页无缩略图
233 235
5IFCBTJDDPODFQUPGMJHIUJOH
Light is an electromagnetic wave with a
velocity of 30 ×10000 km/s
Visible light wavelength :780 ~ 380nm
(nanometer). 1 nanometer =10 to the -9
meters
· The degree to which the light source presents the color o
f the object is called color rendering, that is, the degree of c
olor fidelity.
A high color rendering light source has a better
reproduction of color, and the color we see is closer to the
sun
Primary color of light. Light sources with low color
rendering have a poor reproduction of color, and the color
we see is skewed
Also larger
· Why does high or low color rendering occur? The key is th
e spectroscopic nature of the light,
The wavelength of visible light is in the range of 380mm to
780mm, that is, we are in the spectrum
See the range of red, orange, yellow, green, blue, cyan and
violet. If the light emitted by the source
The proportion of each color light contained in it is similar
to that of natural light, so the color seen by our eyes is also
It's more realistic.
Luminous flux Φ lumen
LM The sum of the amount of light
emitted by the luminous body per
second, that is, the amount of
luminescence
Light intensity I Candela
Cd emitting body in a specific
direction unit solid Angle
The luminous flux emitted
illuminance E Lux
Lx luminous body illuminates the
unit area of the illuminated object
Luminous flux
Colour
temperature K
Color
The color temperature is expressed as the absolute
temperature K (kevin), which is a standard black
The body (such as iron) is heated, and when the
temperature rises to a certain degree, the color
begins to change from red -> light red -> orange
yellow -> white -> blue white -> blue, and gradually
changes, using this light
The characteristics of color change, the light color
of a light source and the blackbody at a certain
temperature
At the same time, the absolute warmth of the black
body at that time is called the color of the light
source
The temperature. The color temperature is below
3000K, and the light color begins to have a reddish
phenomenon, giving people a warm feeling. The color
temperature exceeds 5000K, and the color tends to
be blue, giving people a cool feeling.
rendering
Ra
The degree of color rendering of the light source
to the object is called color rendering, that is, the
degree of color fidelity, the color rendering of the
high light source is better, the color we see is
closer to the natural primary color, the color
rendering of the low light source is poor, and the
color deviation we see is also larger.
From thermal radiation, the sun or incandescent light, can be
analyzed to the complete spectrum: red, orange, yellow, green,
blue and violet corresponding wavelengths of 780 ~ 620 ~ 590 ~
560 ~ 490 ~ 450 ~ 4 20 ~ 380nm
Infrared wavelength: 620 ~ 780nm.
Ultraviolet wavelength: 380 ~ 420nm.
Sunlight: wavelength is 780 ~ 380nm, pure white.
Spectrum and color
Color rendering
www.boohergroup.com 234
Second number indicates
that the lamp is waterproof,
pressure resistant and other
poles
*1
First number Jndicates the
dust class of the luminaire
Density of material
Processing technology
The sealing structure of
the product
Both have a significant
Rating code
impact on the IP level
Colour temperature
Light intensity
Dustproof and waterproof safety
236
w
w
w.boohergroup.com
The color temperature is expressed by the absolute
temperature K(Kelvin). When the standard black body
(such as iron) is heated to acertain degree , the color
starts to change
gradually from dark red to light red to orange yellow to
white to blue white to blue when the temperature rises
to a certain degree. Using this characteristic of light
colorchange, the light color of a light source is the
same as the light color of a blackbody at a certaintemperature, and we call the absolute temperature of
the blackbody at that time color temperature of the
light source.
237 235
3FDIBSHFBCMF'MBTIMJHIU 3FDIBSHFBCMF'MBTIMJHIU
• Explosion-proof markὉEx ib ĉ C T4
• 3W CREE LED light source, service life of up to 100,000 hours
• Shell material: light weight high hardness alloy material • Explosion-proof mark Ὁ
• Lighting duration: strong light 10h, working light 20h; There is also a flash function
• The eight-edge lamp holder can be used as a life-saving tool for smas hing Windows
in emergency rescue
• Protection class: IP65
• Support handheld, wrist hanging, belt sleeve hanging three modes of carrying
Ex d IIC T6
• 3x3W CREE LED light source, service life of up to 100,000 hours
• Shell material: high hardness alloy material
• Lighting duration: strong light 8h, working light 16h
•
• Fireproof, waterproof and dustproof, anti-corrosion, can withstand strong impact
• Protection level: IP68
Supports two modes of carrying: hand and shoulder
ᄤᜉ
2.2Ah ´35x158mm 1
ᄤᜉ
4.4Ah ´69x147mm 1
3FDIBSHFBCMF'MBTIMJHIU
3FDIBSHFBCMF'MBTIMJHIU
3FDIBSHFBCMF'MBTIMJHIU
-FE8BSOJOH-BNQ
• Explosion-proof markὉEx ib ĉ C T4
• Light source: LED lamp bead, 6W, service life of up to 100,000 hours
• Case material: engineering plastic
• Lighting duration: strong light 8h, working light 16h, strobe 40h
• The lamp holder can adjust the irradiation Angle in the range of 90° ;
It has magnetic adsorption function
• Protection level: IP66 • Single key cycle control each file light, easy to operate
• Explosion-proof mark ὉEx ib ĉ C T4
• 3W CREE LED light source, service life of up to 100,000 hours
• Shell material: engineering plastic shell, aluminum lamp holder
• Lighting duration: strong light 5h, working light 10h
•
•
• Lightweight design, can be worn directly on the head or helmet for use,
can be wore directly on your head or helmet, or insert the flashlight in
the front of slot of the helmet.
• Protection level: IP66
High light LED light source; The service life is up to 100,000 hours
Case material: aluminum alloy and engineering plastic, tempered glass lens
• Lighting duration: red stroboscopic 30h, red long bright 12h
• Double-sided light, with a strong magnetic magnet at the bottom, with a
removable metal card for use; With reflective stickers, can be used for reflective display
• Protection class: IP65
ᄤᜉ
4.4Ah ´92x213mm 1
ᄤᜉ
4.4Ah 210x85x116mm 1
ᄤᜉ
1.8Ah 80x63x57mm 1
ᄤᜉ
1.8Ah Long pattern (´98mmἻHeight adjustableὉ270 ᾍ355mm) 1
1.8Ah Shortage ( diameter 98mmἻhigh 160mm) 1
• Light source: CREE LED beads, 3W; There are also 6 HP floodlight beads; Long service
life of up to 100000 hours
• Shell material: Engineering plastic
• Lighting duration: Strong light ≥ 12h, working light ≥ 35h, ultra long floodlight ≥ 50h
• The lamp head can adjust the illumination angle freely within a range of 90 °; Has magnetic
adsorption function
• Protection grade: IP66, which can be used normally in rainstorm
• The lamp head can adjust the illumination angle freely within a range of 120 °; The tail is
equipped with a strong magnetic magnet, which can attach the lamp to the surface of an
iron object; There is an LCD battery level display screen that allows for real-time and
accurate monitoring of the remaining battery level; There is communication
• USB charging port for quick charging of mobile phones for emergency use
• Single key cycle switch, simple operation, exquisite and beautiful appearance, ergonomic
light handle design
www.boohergroup.com 236
3FDIBSHFBCMF'MBTIMJHIU
• Explosion-proof mark ：Ex d Ⅱ C T6
• Light source: LED, service life of up to 100,000 hours
• Shell material: high strength bulletproof rubber material, 1 meter height
drop is not damaged
• Lighting duration: strong light 8 hours, working light 16 hours, strobe 60 hours
• Low voltage warning function, magnetic adsorption function, lamp holder
can adjust the irradiation Angle within 120 degrees
• Protection class: IP65
ᄤᜉ
4.4Ah 160x130x270mm 1
3FDIBSHFBCMF8PSLJOH-BNQ
• 3W CREE LED light source, service life of up to 100,000 hours
• Case material: engineering plastic
• Lighting duration: strong light 10h, working light 20h, signal light 50h
• Can be used as a flashlight (white light), but also as a signal lamp (red and yellow,
red and green, choose a combination)
• Single key cycle switch, intelligent conversion of various lighting modes,
simple operation. Support handheld, waist hanging, bag and other carrying methods
• Protection class: IP65
ᄤᜉ
4.4Ah φ65x173mm yellow, red 1
4.4Ah φ65x173mm green, red 1
3FDIBSHFBCMF'MBTIMJHIU
•
• Explosion-proof mark：Ex de ⅡC T6
Light source: Xenon lamp 35W, service life of up to 10,000 hours
• Shell material: All made of high hardness aluminum alloy die-casting, tempered
glass lenses, has better anti-corrosion, waterproof and waterpro
of performance, good pressure resistance
• Lighting duration: 12 hours
• Rotary switch, with switch locking function; Removable cap design, rem
ovable, adjustable irradiation Angle (> 90 °), easy to operate
• There is a pulley at the bottom to support towing; Fully sealed design
to ensure the normal lighting in rainstorm weather; It is equipped with a lifting rod
and raised by 1.6 meters
• Protection class: IP65
ᄤᜉ
20Ah 200x250x700mm 1
.PCJMF(BTPMJOF-BNQ
• LED light source 4 × 60W, each lamp holder can separately adjust the lighting Angle
• Pneumatic three-section lifting rod, up to 4.5 meters
• Generator power: 2000w, tank capacity 15L, a full filling can work for 13h
• By wireless remote control, each light can be individually turned on and off within
a range of 30 meters
• Protection class: IP65
ᄤᜉ
15L 4.5m 1
238
www.boohergroup.co
m
237
239
'MBTIMJHIU
'MBTIMJHIU
Size - NN
-VNJPO ᄤᜉ $PEF
1 5# battery 97 40 6
Size - NN
-VNJPO ᄤᜉ $PEF
2 1500MAH lithium batteries 235 250 6
• Aluminum alloy shell, beautiful, durable, easy to carry
• High quality high brightness LED lamp beads, life up to 100,000 hours
• Long battery life, can work continuously for about 6 hours
• Imported high-power LED lamp beads, high light efficiency, long life, up to
100,000 hours
• Three levels of light source selection, intense brightness up to 250 lumens
• High quality aluminum alloy barrel, durable, strong endurance, can work continuously
for about 3 hours
• The flashlight is a constant current output function, the power supply
voltage drops within a certain range of its output light intensity is basically constant
'MBTIMJHIU
Size - NN
-VNJPO ᄤᜉ $PEF
1 5# battery 105 40 6
• Aluminum alloy shell, beautiful, durable, easy to carry
• High quality high brightness LED lamp beads, life up to 100,000 hours
• Long battery life, can work continuously for about 6 hours
'MBTIMJHIU
Size - NN
-VNJPO ᄤᜉ $PEF
1 1500MAH lithium battery 140 250 6
• Imported high-power LED lamp beads, high light efficiency, long life, up
to 100,000 hours
• Three levels of light source selection, intense brightness up to 250 lumens
• High quality aluminum alloy barrel, durable, strong endurance, can work continuously
for about 3 hours
'MBTIMJHIU
Size - NN
-VNJPO ᄤᜉ $PEF
2 5# batteries 150 200 6
• Aluminum alloy shell, beautiful, durable, easy to carry
• High quality high brightness LED lamp beads, life up to 100,000 hours
• Long battery life, can work continuously for about 6 hours
'MBTIMJHIU
Size - NN
-VNJPO ᄤᜉ $PEF
1 1500MAH lithium battery 165 250 6
• Imported high-power LED lamp beads, high light efficiency, long life, up
to 100,000 hours
• Three levels of light source selection, intense brightness up to 250 lumens
• High quality aluminum alloy barrel, durable, strong endurance, can work continuously
for about 3 hours
)ZESBVMJD$SJNQFS$BCMF5PPMT
Long-term Power
LED Illumination
18V
Over-loading
PROTECTION To Cut Off The Power
AUTO STOP Low V protection
PROTECTION 110V or 230V Charger
BATTERY Head Rotation
RELOAD Back To Origin
180O
Comfortable Design
SKIDPROOF For Small Space
MANUAL Follow User Guide
MAINTAIN Maintain Regularly
PROTECTION Put On Goggles
PROTECTION Work With Glove
EASY
$IBSBDUFSJTUJDTPGSFDIBSHFBCMFIZESBVMJDUPPMT
-&%MJHIUJOH
TUBOECZTFDPOET
BVUPNBUJD QPXFS P
SPUBSZIFBE
TVJUBCMFGPS EJFSFOU XPSLJOH
-JHIU XFJHIU
FBTZ UP IPME
DBO CF PQFSBUFE
XJUI POF IBOE TVJUBCMF GPS TNBMM TQBDF
PQFSBUJPO
BOHMFT
0JM SFUVSO CVUUPO
NFDIBOJDBMQSFTTVSF
SFMJFG DBO CF QSFTTFE BU BOZ QSFTTVSF UP
SFUVSO UIF QJTUPO
/POTMJQSVCCFS FSHPOPNJDEFTJHO
-PXWPMUBHFQSPUFDUJPOBHBJOTUFYDFTJWFCBUUFSZ
EJTDIBSHF
\"VUNBUJDQPXFSP
UIFCBUUFSZDBOCFMBTUMPOHXIFO
OPUXPSLJOH
6TFUIFUPPMUPXBLFVQUIFCBUUFSZCFGPSFDMJDLJOH
8JUIBJSJOUBLFBOEFYIBVTU
DPPMJOHNPUPSQSPMPOH
UPPMMJGF
7MJUIJVNCBUUFSZ
JOUFUMMJHFSJUDPPMJOHEFTJHO
0QFSBUJPOUJNFQSPNQUT
1SFWFOUPWFSDIBSHF
IJHIUFNQFSBUVSFBCOPSNBMQPXFSP
\"OUJEFFQEJTDIBSHF
OPDIBSHFNFNPSZ
www.boohergroup.com 240
• Hexagonal crimping has almost no flash edge, and the six surfaces are stressed
• Crimp size setting table can adjust crimp size 0~44mm stroke control c
at the same time, and the casing does not bend and deform after crimping
an adjust crimp size without pole
• The stroke control automatically controls the working pressure accordi
ng to the size of the crimped terminal
Equipped with 14.4V 4.0Ah large capacity lithium battery, a charge can
be crimped 70mm cable about 70 times
• head-C opening design, through casinghcihw placedbecan
• The crimping machine has a counter to facilitate equipment maintenan
ce and repair analysis, while the hydraulic pump can adjust the operating
pressure and piston return time, which is convenient for different travel
equipment or crimping requirements
• Hydraulic pump with pressure switch can adjust the operating pressure or as a saf
ety valve function
• The device has a size table to adjust different terminal crimp sizes. Foot switch allo
ws operators to work with both hands
• With emergency stop button in any emergency can press the switch to cut off the
power supply to protect the safety of personnel
• Hexagonal crimping has almost no flash edge, and the six surfaces are stressed at
the same time, and the casing does not bend and deform after crimping
• The 0-44mm stroke control can adjust the size of the crimp infinitely and automatically
control the working pressure according to the size of the crimp terminal
• With crimping positioning device, suitable for a large number of standardized prcome
ocessing in the production line
#BUUFSZ0QFSBUFE)FYBHPOBMEJFMFTTDSJNQJOH5PPM )FYBHPOBMEJFMFTTDSJNQJOH5PPM
480x90x420 10kg 700 bar 10~300mm 125KN
: ʦApplication: Rubber multi-core cable, coaxial
cable, copper and aluminum stranded wire
terminal and sleeve crimping
ʦOptional mobile workbench, you can also
directly fix the crimping machine in the required
noitisop
220V AC 76.32kg 700 bar 20.4kg 250KN
• Automatic pressure retention is completed by crimping, which can over
the problem of creep deformation
• Mechanical pressure relief, battery power depletion can also be returned to the piston
10~400mm 570x250x560mm
242
com. boohergroup .www
2m Hydraulic oil pipe
General hexagonal compression ratio
Working angles are adjustable,vertical, 45 degrees, and horizontal
Open type
range:10-400mm2
Continuous adjusting the crimping size, get it precisely right in one time
mobility workbench(optional)
Battery
not included
foot pedal wired control
4J[F
NN
2
2
2
241
243
\"MMJOPOFIZESBVMJDUPPMTFMFDUJPOUBCMF
)BOEDSJNQJOH
)BOETIFBS
q
q
.BYJNVNIBSEMJOFTIFBSNN
q
.BYJNVNDSJNQNNq
q
.BYJNVNDPSETIFBSNN
.BYJNVNDPSETIFBSNN
.BYJNVNDPSETIFBSNN
.BYJNVNDPSETIFBSNN
q
q
q
#BUUFSJFEDSJNQJOH #BUUFSJFETIFBS
www.boohergroup.com 242
• Lightweight, compact, slim design.
• Single acting cylinder, spring return. • • The crimping joint uses a hook type for easy replacement of molds and
crimping sleeves.
• Built-in pressure relief valve.
• The small opening range of the crimp handle can be used for narrow space
• Contains A series of pressure welding mold: 1016/2535/5070/95120/150/185
Compact and lightweight design
• Easy to set up with star rotation mold
•
• The two-stage cylinder can be quickly fed, the air pressure only needs
3 times, and the crimping only needs 10 times
Automatic pressure relief function
• With press die: 14,22,38 ~70 and 80~150mm , no additional press die
is required
)ZESBVMJD$SJNQFS )ZESBVMJD$SJNQFS
-FOHUI
NN
8FJHIU
LH
$SJNQJOH$BQBDJUZ .BY
1SFTTVSF
0JM
3FRVJSFE .BY0VUQVU $PEF
370 2.1 10/16/25/35/50/70
/95/120/150/185 550 bar 57 cc 5.3 tons /
52 KN
-FOHUI
NN
8FJHIU
LH
$SJNQJOH$BQBDJUZ .BY
1SFTTVSF
0JM
3FRVJSFE .BY0VUQVU $PEF
528 5.0 14，22，38~70 及
80~150mm 700 bar 138 cc 12.7 tons /
125 kN
• Fiberglass handles are lightweight and durable.
• Pressure relief valve with overload protection.
• According to the crimping output, the high and low pressure automatic
ally switches.
• The head can be rotated 180 ° to facilitate the working Angle.
• External adjustable pressure valve.
• The two-stage plunger feed system greatly reduces the number of han
dle pressurizations.
• Standard with 70-400 a total of 8 12 tons of crimping mold, can also
be added with mold or optional 8 sets of mold combination
)ZESBVMJD$SJNQFS
-FOHUI
NN
8FJHIU
LH
.BY
1SFTTVSF 0JM3FRVJSFE .BY0VUQVU +BX0QFOJOH $PEF
641 7.6 700 bar 147 cc 12.7 tons /
125 KN NN
.BY$PNQSFTTJPO $SJNQJOH$BQBDJUZ
16/25/35/50/70/95/120 400 mm Copper terminal /150/185/240/300/400
• Lightweight, compact, slim design.
• Pressure relief valve with overload protection.
• According to the crimping output, the high and low pressure automatic
ally switches.
• The head can be rotated 180 ° to facilitate the working Angle.
• External pressure regulating valve.
• Two-stage pressure regulating valve.
• Standard 35-240, a total of 8 6 tons of crimping mold, can also be add
ed with mold or optional 8 sets of mold combination
)ZESBVMJD$SJNQFS
-FOHUI
NN
8FJHIU
LH
$SJNQJOH$BQBDJUZ .BY
1SFTTVSF
0JM
3FRVJSFE
.BY
0VUQVU
3BN
4USPLF $PEF
427 3.2 16/25/35/50/70
/95/120/150/185/240 550 bar 55 cc 6.2 tons
/ 61 KN 16
244
The piston stroke can be adjusted by 10-15MM to reduce the number
of pressurization cycles
2
2
243
245
)ZESBVMJD$BCMF$VUUFS )ZESBVMJD$BCMF$VUUFS
• The head can be rotated 180 ° for easy operation.
• Frame design avoids stuck knives.
• Single stage feed.
• The upper and lower blades are easy to replace.
• The hook type cutter head can easily place the cutting material and avoi
d the problem of bending and sticking of the latch. • The hook type cutter head can easily place the cutting material and avoi
• Single stage inlet pressure, piston spring return. d the problem of bending and sticking of the latch.
• No need to set work pressure.
• Lightweight, self-powered and can be used anytime and anywhere.
Cutting Capacity Note
Wire rope 6x7 24 mm
Tensile strength
(daN/mm2
）≤180
Cutting of piano
wire is prohibited.
Wire rope 6x12 24 mm
Wire rope 6x19 24 mm
Soft copper bar 24 mm
Soft aluminium bar 24 mm
Soft steel bar 23 mm
Cu Strands 24 mm
Al Strands 24 mm
ACSR 24 mm
CCP cable CCP N/A
-FOHUI
NN
8FJHIU
LH
.BY1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
360 2.7 700bar 56cc 6.7tons / 66 KN
• The head can be rotated 180 ° for easy operation.
• Frame design avoids stuck knives.
• Single stage feed.
• The upper and lower blades are easy to replace.
• Piston spring reset.
• No need to set work pressure.
• Lightweight, self-powered and can be used anytime and anywhere.
Cutting Capacity Note
Wire rope 6x7 40 mm
Cutting of piano
wire is prohibited.
Wire rope 6x12 40 mm
Wire rope 6x19 40 mm
Soft copper bar 32 mm
Soft aluminium bar 40 mm
Soft steel bar 20 mm
Cu Strands 40 mm
Al Strands 40 mm
ACSR 40 mm
-FOHUI
NN
8FJHIU
LH
.BY1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
683 6.8 700 bar 147 cc 9.7 tons / 95 KN
• Bolt type cutting head.
• High and low pressure two-stage feed allows fast feed.
• The head can be rotated 180° for easy operation.
• Frame design avoids stuck knives.
• The upper and lower blades are easy to replace.
• Piston spring reset.
• No need to set work pressure.
• Lightweight, self-powered and can be used anytime and anywhere.
Cutting Capacity Note
Cu Strands 28 mm
Cutting of piano
wire is prohibited.
Al Strands 38 mm
CCP Cable 85 mm
Wire rope N/A
Wire rope N/A
Wire rope N/A
Soft steel bar N/A
Reinforcing rod N/A
ACSR N/A
Guy wire N/A
Guy wire N/A
)ZESBVMJD$BCMF$VUUFS
-FOHUI
NN
8FJHIU
LH
.BY1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
Cutting Capacity Note 715 9.7 700 bar 145 cc 5 tons / 49 KN
Wire rope 6x7 25mm
Cutting of piano
wire is prohibited.
Wire rope 6x12 30mm
Wire rope 6x19 30mm
Soft copper bar 35mm
Soft aluminium bar 28mm
Soft steel bar 22mm
Reinforcing rod 19mm
Cu strands 54mm
AI strands 54mm
ACSR 54mm
Guy wire1x7 1x7 15mm
Guy wire1x19 1x19 20mm
Underground cable 50mm
)ZESBVMJD$BCMF$VUUFS
-FOHUI
NN
8FJHIU
LH
.BY1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
631 10.3 700bar 89cc 12.7ton/124.5kN
www.boohergroup.com 244
• The housing has an inlet and exhaust cooling motor
• Equipped with LED lighting
• Equipped with safety switch to prevent misoperation
• It has a non-slip rubber for a comfortable grip
• Overvoltage protection system to prevent motor overheating damage
• Equipped with high performance 18V lithium battery with low voltage
protection to prevent battery overdischarge
• A series mold is required
• Balanced center of gravity design, easy to hold
• High performance and short charging time
•
• U-shaped head two-stage quick crimping design
With 680bar safety valve design
• After finishing the crimping work, it will automatically enter the power saving mode
• Charging prompt and maintenance service
light reminder when the power is low
• Standard with 70-400 a total of
8 12 tons of crimping mold, can al
so be equipped with another mold
or optional 8 sets of mold combina
tion
• The C-type compression joint can be rotated 180 degrees, and the opening
• Standard 18V l ithium battery
is 44mm, which is the widest of similar products in the market at present
• Perfect center of gravity balance design, non-slip handle effortless use
• After crimping is complete, it automatically enters the power saving mode
•
•
• Two-stage quick crimping design, the safety valve can automatically reli
eve pressure when it reaches the set pressure
• Standard with 70-400 a total of 8 12 tons of crimping mold, can also
be equipped with another mold or optional 8 sets of mold combination
• Standard 18V lithium battery
The housing has an inlet and exhaust cooling motor
• Equipped with LED lighting
Equipped with safety switch to prevent misoperation
•
• It has a non-slip rubber for a comfortable grip
Overvoltage protection system to prevent motor overheating damage
• Equipped with high performance 18V lithium battery with low voltage pro
tection to prevent battery overdischarge
• Standard with 35-240 a total of 8 6 tons of crimping mold, can also be
equipped with another mold or optional 8 sets of mold combination
• Standard 18V l ithium battery
#BUUFSZ)ZESBVMJD$SJNQFS #BUUFSZ)ZESBVMJD$SJNQFS
*OQVU
WPMUBHF
3FTFSWPJS
DBQBDJUZ
.BY
0VUQVU
.BY
1SFTTVSF )FJHIU 8FJHIU %SJWFS
VOJU .BJO\"QQMJDBUJPOT $PEF
220V 48 cc 5.3 tons
/52 kN 460bar 354mm
2.67 Kg
( 含 2.0Ah
电池 )
18V
DC
Up to 240mm2 CU
240mm2
Copper terminal
*OQVU
WPMUBHF
3FTFSWPJS
DBQBDJUZ
.BY
0VUQVU
.BY
1SFTTVSF )FJHIU 8FJHIU %SJWFS
VOJU .BJO\"QQMJDBUJPOT $PEF
220V 48 cc 6.2 tons
/61 kN 550bar 354mm
3.3 Kg
W/2.0Ah
battery
18V
DC
Up to 240mm2
240mm2
#BUUFSZ)ZESBVMJD$SJNQFS
*OQVUWPMUBHF *OQVUGSFRVFODZ *OQVUDVSSFOU 3FTFSWPJSDBQBDJUZ
220V 50-60HZ 21.75VA 120 cc
)FJHIU 8FJHIU .BY
0VUQVU %SJWFVOJU +BXPQFOJOH .BJO\"QQMJDBUJPOT $PEF
363 mm 7.8
kgs
12.7 tons /
125 KN 18V DC 44 mm
6QUPNN
$6
NN
$PQQFS UFSNJOBM
\"
.PEFM/P )FJHIU .BY0VUQVU %SJWFVOJU $PEF
323 mm 7 kgs 12.7 tons / 125 kN 18V DC \"
*OQVUWPMUBHF *OQVUGSFRVFODZ *OQVUDVSSFOU 3FTFSWPJSDBQBDJUZ
220V 50-60HZ 21.75VA 120 cc
-PXQSFTTVSF
TQMJDFTMFFWF *OTVMBUFEUFSNJOBM $DBTJOH )JHIQSFTTVSFDPVQMJOH
CVTIJOH
400mm
\"MVNJOVNDPVQMJOH
TMFFWF
2 240mm2 185mm2 400mm2 300mm2
#BUUFSZ)ZESBVMJD$SJNQFS
44mm
246
245
247
*OQVUWPMUBHF *OQVUGSFRVFODZ *OQVUDVSSFOU 3FTFSWPJSDBQBDJUZ
220V 50-60HZ 21.75VA 120 cc
)FJHIU 8FJHIU .BY
0VUQVU
.BY
0VUQVU
$V
TUBOET
\"M
TUBOET $$1DBCMF %SJWFVOJU $PEF
8 tons / 360mm No battery
2.2 kgs
78.4 KN 700 bar 60 mm 60 mm 85mm 14.4V DC
Motor
#BUUFSZ$BCMF$VUUFS
*OQVUWPMUBHF *OQVUGSFRVFODZ *OQVUDVSSFOU 3FTFSWPJSDBQBDJUZ
220V 50-60HZ 21.75VA 120 cc
)FJHIU 8FJHIU .BY
0VUQVU
.BY
0VUQVU
$V
TUBOET
\"M
TUBOET $$1DBCMF %SJWFVOJU $PEF
516.2mm 8 kgs 8 tons /
78.4 KN 700 bar 60 mm 60 mm 85mm 18V DC
Motor \"
#BUUFSZ)ZESBVMJD$BCMF$VUUFS
*OQVUWPMUBHF *OQVUGSFRVFODZ *OQVUDVSSFOU 3FTFSWPJSDBQBDJUZ
220V 50-60HZ 21.75VA 70 cc
)FJHIU 8FJHIU .BY
0VUQVU .BY0VUQVU .BUFSJBM %SJWFVOJU $PEF
328 mm 7.1 kgs 9.7 tons / 96
KN
Φ 45 mm
Φ 45 mm ACSR 18V DC
Motor \"
#BUUFSZ)ZESBVMJD$BCMF$VUUFS
#BUUFSZ$BCMF$VUUFS
• The handle and the blade have the same axial plane, easy to operate
• Small body, power foot, low noise, easier, safer, more times to cut
• Standard wristband with battery allowance
• 14.4V battery is standard
• Used for cutting copper and aluminum cores
• Latch type knife head, the head can be rotated
• Two-stage fast feed design
•
• Center of gravity balance design, easy to hold
High performance motor, fast operation and 700bar safety valve design
• Standard 18V lithium battery with charging indicator
• Scissor type open hydraulic cutting head, the head can be rotated
• After the shearing operation is complete, the power saving mode
is automatically entered
• Standard 18V lithium battery and charging display light
• Two-stage fast feed design
• Center of gravity balance design,
easy to use and easy to hold
• With high performance motor, fast
operation and 700bar safety valve design
*OQVUWPMUBHF *OQVUGSFRVFODZ *OQVUDVSSFOU
ᣥКႃԍ ᣥКᮠဋ ᣥКႃื
220V 50-60HZ 21.75VA
)FJHIU 8FJHIU %SJWFVOJU .BY$BCMFEJBNFUFS $PEF
360 mm 4.0kgs 14.4V DC
Motor
No steel wire 65 mm
Nonferrous 65 mm
1PMZFUIZMFOF
DBCMF
.VMUJDPSFWJOZM
JOTVMBUJPODBCMF 4#\"$43 )BSEBMVNJOVN
DBCMF
)BSEDPQQFS
DBCMF 44DBCMF
7$7NN
NN0%
773NN
NN0%
DPSF
\"$43NN
NN0%
)\"-0$NN
NN0%
0&0$NN
NN0%
NN$$1'
44 $3
DBCMF
www.boohergroup.com 246
4QMJUIZESBVMJDUPPMTFMFDUJPOUBCMF
\"MVNJOVNBMMPZUXPTQFFE
NBOVBMIZESBVMJDQVNQ
.BOVBMIZESBVMJDQVNQ
'PPUIZESBVMJDQVNQ
.BYJNVNTIFBSNN
.BYJNVNTIFBSNN
.BYJNVNTIFBSNN
.BYJNVNTIFBSNN
.BYJNVNTIFBSNN
.BYJNVNTIFBSNN
5
NN
5
NN
1201 901 ~ 1201 909
.BYJNVNOVU.
.BYJNVNBQFSUVSFNN
5IFNBYJNVNQMBUFUIJDLOFTTJTNN
.BYJNVNBQFSUVSFNN
&MFDUSJDIZESBVMJDQVNQ
)BSEDVUUFS $SJNQJOHKPJOU
/VUDSVTIFS
5IJOJSPOQMBUF
QVODIJOHNBDIJOF
)ZESBVMJD\"OHMF
QVODIJOHNBDIJOF
4PGUDVUUFS
)ZESBVMJDQVNQTUBUJPO
248
247
249
0JMGSFFQJQF
• Double feed allows the piston to move forward quickly
• Two stage feed
• The maximum working pressure of external pressure regulator is 700bar
• Pedal type pressure relief, easy to operate tools with both hands
• The removable integral safety valve is easily replaceable
• Economical and reliable foot hydraulic pump
• 12V control voltage only; Visual hydraulic oil window; Single stage feed
;
• With handle and durable steel housing
• When the pressure switch reaches the set pressure, the motor stops rotating;
• Wired remote control, can control the oil or oil return action at any time;
• It can be adjusted forward or back at any time during cutting or crimping
operations;
&MFDUSJD)BOE1VNQ
)JHI 8FJHIU .BY
1SFTTVSF
0JM
3FRVJSFE *OQVU -PX1SFTTSF )JHI1SFTTSF $PEF
374mm 18kg 700bar 3000cc Single-phase 50/60Hz
220V 350W 2.6L/min 0.32L/min
)ZESBVMJD)BOE1VNQ )ZESBVMJD)BOE1VNQ
•
•
• Wide range of use, including safety valve design to prevent overload
• Automatic switching, high efficiency, large tank capacity
• With high and low pressure two-stage feed, it can make the piston
move forward quickly
The whole aluminum alloy structure, light and easy to carry
Ergonomic pressure relief valve with knob design for labor-saving rotation
• Double feed allows the piston to move forward quickly
• Two stage feed
• The maximum working pressure of external pressure regulator is 700bar
• Vacuum oil sac can be operated at any Angle
• The removable integral cylinder safety valve is easy to replace
• Economical and reliable manual hydraulic pump
.BY
1SFTTVSF
0JM
3FRVJSFE -PX1SFTTSF )JHI1SFTTSF -FOHUI 8FJHIU #PY $PEF
700bar 1500cc 3.9cm /min 13.5cm /min 567mm 9.0kg 1
.BY
1SFTTVSF
0JM
3FRVJSFE -PX1SFTTSF )JHI1SFTTSF -FOHUI 8FJHIU $PEF
700bar 705cc 11.9cc 1.8cc 595mm 9.0kg 1
)ZESBVMJD'PPU1VNQ
.BY
1SFTTVSF
0JM
3FRVJSFE -PX1SFTTSF )JHI1SFTTSF -FOHUI 8FJHIU $PEF
700bar 720cc 36.2cc/min 2.1cc/min 720mm 12.0kg 1
#PY
3 3
#PY
www.boohergroup.com 248
)ZESBVMJD$BCMF$VUUFS)FBE )ZESBVMJD$BCMF$VUUFS)FBE
•
• Suitable for connecting all types of hydraulic pumps with output pressu
• Can be connected to external hydraulic pump, quick cut off
res of 700bar(10,000 psi)
Built-in blade for easy replacement
• The hook type cutter head is designed for easy placement of the cuttin
g material and eliminates the need for the latch to bend and stick
Cutting Capacity Note
Cu Strands 50 mm Cutting of piano
Al Strands 50 mm wire is prohibited.
CCP cable 50 mm
-FOHUI 8FJHIU .BY1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
342 mm 3.2 kgs 700 bar 70 cc 5 tons / 49 KN
• Functional handle for easy operation.
• Bolt type cutting head.
• External hydraulic pump cut off fast.
• Various types of hydraulic pumps with output pressures of 700 bar(1
0,000 psi) can be connected.
• The blade is easy to replace.
• Spring return single acting cylinder.
Cutting Capacity Note
Wire rope 6x7 N/A
Cutting of piano
wire is prohibited.
Wire rope 6x12 N/A
Wire rope 6x19 N/A
Soft steel bar N/A
Reinforcing rod N/A
Cu Strands 28 mm
Al Strands 38 mm
ACSR N/A
Guy wire 1x7 N/A
Guy wire 1x19 N/A
CCP cable 85 mm
-FOHUI 8FJHIU .BY1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
430 mm 6.8 kgs 700 bar 65 cc 5 tons / 49 KN
)ZESBVMJD$BCMF$VUUFS)FBE
Cutting Capacity Note
Soft steel bar 16 mm Tensile strength
(daN/mm2
）≤180
Cutting of piano Reinforcing rod 13 mm
Cu Strands 24 mm
Al Strands 24 mm
ACSR 24 mm
• External hydraulic pump cut off fast.
• Various types of hydraulic pumps with output pressures of 700 bar(10,
000 psi) can be connected.
• The hook type cutter head can easily place the cutting material and av
oid the problem of bending and sticking of the latch.
• Spring return single acting cylinder.
• The built-in blade is easy to replace.
-FOHUI 8FJHIU .BY
1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
240.3 mm 2.1 kgs 700 bar 27 cc 6.7 tons / 65.66 KN
• External hydraulic pump cut off fast.
• Various types of hydraulic pumps with output pressures of 700 bar(10,
000 psi) can be connected.
• The blade is easy to replace.
• The hook type cutter head can easily place the cutting material and avo
id the problem of bending and sticking of the latch.
• Piston spring return single acting cylinder.
Cutting Capacity Note
Wire rope 6x7 25mm
Cutting of piano
wire is prohibited.
Wire rope 6x12 30 mm
Wire rope 6x19 30 mm
Soft copper bar 35 mm
Soft aluminium bar 28 mm
Soft steel bar 22 mm
Reinforcing rod 19 mm
Cu Strands 54 mm
Al Strands 54 mm
ACSR 54 mm
Guy wire 1x7 15 mm
Guy wire 1x19 20 mm
CCP cable N/A
)ZESBVMJD$BCMF$VUUFS)FBE
-FOHUI 8FJHIU .BY1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
365 mm 7.2 kgs 700 bar 88.6 cc 12.7 tons /
124.46 KN
250
249
251
)ZESBVMJD$BCMF$VUUFS)FBE )ZESBVMJD$BCMF$VUUFS)FBE
• Can be connected to external hydraulic pump, quick cut off
• Suitable for connecting all types of hydraulic pumps with output pressu
res of 700bar(10,000 psi)
Cutting Capacity Note
Cu Strands 95 mm
wire is prohibited.
Cutting of piano
Al Strands 95 mm
-FOHUI 8FJHIU .BY1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
394 mm 8.1 kgs 700 bar 125 cc 13.5 tons / 132.3 KN
• Functional handle, easy to carry and operate
• Pin type cutter head design
• Can be connected to external hydraulic pump, quick cut off
• Suitable for connecting all types of hydraulic pumps with output press
ures of 700bar(10,000 psi)
• Built-in blade for easy replacement
• Piston spring return single acting cylinder
-FOHUI 8FJHIU .BY1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
560 mm 9.6 kgs 700 bar 193 cc 10.6 tons / 105 KN
Cutting Capacity Note
Cu cable 120 mm
wire is prohibited.
Cutting of piano
Al cable 120 mm
CCP cable 120 mm
)ZESBVMJD$SJNQFS)FBE )ZESBVMJD$SJNQFS)FBE
-FOHUI 8FJHIU .BY
1SFTTVSF 0JM3FRVJSFE .BY0VUQVU +BX
0QFOJOH $PEF
276 mm 5.1 kgs 700 bar 80 cc 12.7 tons /
125 KN NN
-FOHUI 8FJHIU .BY
1SFTTVSF 0JM3FRVJSFE .BY0VUQVU $PEF
263 mm 2.1 kgs 700 bar 10 cc 5.3 tons / 52 KN
$SJNQJOH$BQBDJUZ
16/25/35/50/70/95/120/150/185/240/300/400
$SJNQJOH$BQBDJUZ
A series mold 1016/2535/5070/95120/150/185/240
• The large opening is suitable for 400 mm intermediate connection casing
or small clamp pipe crimping.
•
• Suitable for 12t crimping mould
Crimp mold not included
• Button-hook type crimping joint is easy and fast to operate
• Compact and lightweight design
• Can be connected to any hydraulic pump with an output pressure of 700bar
(10,000 psi)
• The crimping mould must be purchased separately
www.boohergroup.com 250
• Compact and compact design, easy to use
• Available in seven sizes of nut cutters
• The tilted head design can be used for most jobs
• Single acting hydraulic cylinder spring return
• A variety of hydraulic pumps with an output pressure of 700bar are available
• Note: The nut hardness cannot exceed HRC-44
• Can not be used to cut stainless steel nuts or star, square nut, nut strength
should not be higher than 8
/VU4QMJUUFS
#PMU3BOHF )FY/VU3BOHF
ἷNNἸ
$BQBDJUZ
ἷUPOἸ
0JM$BQBDJUZ
ἷDN³Ἰ
%JNFOTJPOTἷNN
ἷNNἸࠪࡇ
/FU8FJHIU
ἷLHἸ
(SPTT
8FJHIUἷLHἸ $PEF
M6-M12 10-19 5
4JOHMF#MBEF5ZQD
15 170 40 48 1.2 2.6
M12-M16 19-24 10 20 191 54 62 2.0 3.6
M16-M22 24-32 15 60 222 64 72 3.0 5.2
M22-M27 32-41 20 80 244 75 88 4.4 7.0
M27-M33 41-50 35 155 288 94 105 8.2 13.6
M33-M39 50-60 50 240 318 106 128 11.8 18.4
M39-M48 60-75 492 393 156 181 34.1 42.7
%PVCMF#MBEF
90
M16-M22 24-32 15 60 275 64 78 3.5 5.4
M22-M27 32-41 20 80 305 77 90 5.1 7.2
•
• Base for precise punching and easy positioning; Single action cylinder reduces burrs.
• C-head is made of high-strength forged steel; Handles can be used for con
venient handling tools.
Including punching die; Safe and efficient use.
• Any output pressure can be connected to any hydraulic pump
with an output pressure of 700 bar(10,000psi).
-FOHUI 8FJHIU .BY
1SFTTVSF 0JM3FRVJSFE .BY0VUQVU +BX
0QFOJOH $PEF
360 mm 13 kgs 700 bar 82 cc 31 tons
/ 305 KN NN
.BY5IJDLOFTT .BY%JBNFUFS
10 mm 20.5 mm
)ZESBVMJD1VODIFS
•
•
• The compact design is perfect for tight Spaces
•
• Suitable for opening holes on the panel of electrical control panel or switch cabinet.
Fast, easy to operate.
or maintenance work.
12.7 tons of large output hydraulic piston.
Mold specifications: 16,20,25,32,40,50 mm.
8FJHIU 4UBJOMFT4UFMM .JEF4UFF .BY%JBNFUFS $PEF
7.6 kgs 1.6 mm 3.2 mm 4 inch (101.6 mm)
4IFFU.FUBM1VODIFS
UJQT
●
●
●
●
●
252
Crimping tool: Please pay attention to the maximum crimping
specification of the tool (square number, sleeve diameter, sleeve
type)
Operating frequency (manual tools are suitable for small quantities
and areas without power supply; split type tools are suitable for
high-frequency outdoor construction operations, areas with power
supply, or where customers already have hydraulic pumps;
rechargeable tools are suitable for small quantities, emergency
repairs, or areas without power supply, high-altitude workplaces,
etc.)
When using split type tools, attention should be paid to the form of
the hydraulic pump. If the hydraulic pump is single acting, it can
only be used with a single acting tool, and if it is a compound
acting hydraulic pump, it can only be used with a compound
acting hydraulic tool.
The hydraulic cutter should pay attention to the material being cut.
If it contains steel cores, steel strands, or soft iron bars, a hard
type cutter specifically designed for cutting certain materials
should be used. Generally, hydraulic cutters for cables can only be
used to cut copper and aluminum wires.
Hydraulic cutters also need to consider the cutting diameter,
which must be able to be completely inserted into the cutter in
order to cut. However, due to the issue of material shear strength,
when purchasing, attention should be paid to the maximum
specification of the cutting material in the product description. This
means that the material may not be able to be cut just by inserting
it, and special attention should be paid to the cutting capacity
specification table.
251
253
• Please consult Booher company for special specifications
$SJNQFST%JFT
$SJNQFST%JFT
4J[F
ᄤᜉ
$PEF
10mm2 1
16mm2 1
25mm2 1
35mm2 1
50mm2 1
70mm2 1
95mm2 1
120mm2 1
150mm2 1
185mm2 1
240mm2 1
300mm2 1
400mm2 1
4J[F
ᄤᜉ
$PEF
ಫ ᄤᜉ 餗〿
10mm2
1 16mm2
25mm2
1 35mm2
50mm2
1 70mm2
95mm2
1 120mm2
150mm2 1
185mm2 1
240mm2 1
• Please consult Booher company for special specifications
$SJNQFST%JFT
4J[F
ᄤᜉ
$PEF
16mm2 1
25mm2 1
35mm2 1
50mm2 1
70mm2 1
95mm2 1
120mm2 1
150mm2 1
185mm2 1
240mm2 1
300mm2 1
#BUUFSZBOE$IBSHFST
0VUQVU7PMUBHF $POUFOU $BQBDJUZ
ᄤᜉ
$PEF
14.4V 14.4V battery 2.6Ah 1
18V 18V battery 2.0Ah 1
220V
The charger is
suitable for 14.4V
and 18V
10.8~18V 1
• Prevent overcharge, high temperature abnormal power off
• Anti-deep discharge, no charge memory problem
7MJUIJVNCBUUFSZ
7MJUIJVNCBUUFSZ
6OJWFSTBMDIBSHFS
• Applicable to Booher 1201 385 1203 540 1201416
• Please consult Baohe company for special specifications
www.boohergroup.com 252
.VMUJGVODUJPO4USJQQFS 1FFMBCMF4FNJDPOEVDUPS5PPM
#POEFE4FNJDPSEVDUPS4USJQQFS .VMUJGVODUJPO4USJQQFS4FU
0%DBCMF $SPTTTFDUJPO 4J[F 8FJHIU $PEF
16-58 mm 25-630mm2 185x90x120mm 1.03kg
0%DBCMF $SPTT
TFDUJPO %FQUI %FQUIPG
4FUUJOH 4J[F 8FJHIU $PEF
18-60 mm 50-630mm2 0.4-1.1mm 0.1mm 165x80x100mm 1.03kg
• It is used for peeling off the non-peeling outer semi-conductive layer.
In actual use, the municipal emergency repair can efficiently solve the
processing of the non-peeling outer semi-conductive layer that has pas
sed the electric cable
• Unique design even if the cable eccentric can also have very good clamping,
can have the best peeling effect
• Aluminum alloy wear-resistant body, durable
• Slide design Simply adjust a fastening nut to quickly clamp the cable
• Cutting edge with feed depth display allows precise adjustment of cutting thickness
• Having 12 rolling bearings stripped except for semi-conductive layers
does not require the use of lubricating grease
• Rotate the handle to operate the peeler with one hand
• The outer semi-conductive layer can be scraped to form 8 ° chamfer
at the same time
• The reserved length of the outer semi-conductive layer is 25mm
• After the outer semi-conductive layer is scraped off, it can have very
good scraping surface marks and save a lot of grinding time
• With 0.4,0.7,0.9,1.1mm four cutting depth can be operated
• For multifunctional peelers
• Extractor design quick replacement
• The cutting operation can simultaneously cut the chamfer in the peelable
outer semi-conductive layer
0%DBCMF $SPTT
TFDUJPO %FQUI 4VJUBCMF
5PPM 4J[F 8FJHIU $PEF
18-60 mm 50-630mm2 0.4-1.1mm 1207 160 63x20x27mm 80g
$IBNGFS5PPM
• The extractor design is suitable for all multi-functional peelers
• Easy installation and operation
• The two-stage position allows the tool to be pulled up during other operations to
avoid damage to other non-operational cable layers
• Interchan geable blade
• Simple but not simple, a set of tools basically complete all the pre-pro
cessing of 35kv, 60mm cables
• Customized EVA, high-grade safety box, carefully protected tools to e
nsure high efficiency when use
• Free peel length positioner with complete purchase, this product is not only sold
• The insulated cable knife is used to cut the outer back and peel off the
outer semi-conductive layer, and the flat nose pliers are used to peel off
the outer semi-conductive layer
4VJUBCMF5PPM $PEF
1207 160
Multi-functional peeler 16-58mm
The outer semi-conductive layer can not be peeled off 18-60mm
Extractor tool for stripping outer semi-conductive layer 18-60mm
Main insulation Angle guide
Peel length locator
Two-color VDE insulated small circular cable cutter 28x155mm
Two color flat nose pliers 150mm(6\")
Contents
ᄤᜉ
$PEF
͈ ᄤᜉ 餗〿
5IFNBJOJOTVMBUJPO
MBZFSJTTUSJQQFE
5IFPVUFSTFNJ
DPOEVDUJWFMBZFSDBOCF
QFFMFEPGG
.BJOJOTVMBUJPODIBNGFS
254
• Used for the main insulation layer, it can peel off the outer semiconducting layer. For
chamfering the main insulation layer, a chamfering tool (1207204) needs to be
purchased separately
• Unique design provides excellent clamping even if the cable is eccentric, resulting in
the best stripping effect
• Aluminum alloy wear-resistant body, durable and long-lasting
• The four column guide rail design can quickly clamp the cable by adjusting one
fastening nut
• The cutting edge has a depth display that can accurately adjust the cutting thickness
of the blade
• It has cutting thickness control for the thickness of the cutting feed per rotation,
making the operation easier and achieving regular cutting effects
• Quick insertion and removal of the rotating handle, allowing for one handed operation
of the peeler to scrape off the outer semiconducting layer and simultaneously form
chamfers
• After scraping off the outer semiconductor layer, there can be very good surface
marks that can save a lot of polishing time
253
255
• The head can be rotated 180 °, suitable for various angles of operation
• Pin type connector, can connect a variety of different functions of the
adapter;
• Can achieve: cutting, punching, bending, crimping, nut breaking, etc.;
• Suitable for crimping stainless steel pipe, copper pipe, PEX aluminum-pl
astic composite pipe, specifications 1/2 \",3/4 \",1\"
• Aluminium alloy adapter
• Lightweight design
• The head can be rotated 350 °
• Work in dark places with LED lighting
• Automatic pressure relief ensures crimping quality
• Mechanical pressure relief
• The remaining battery capacity is displayed
• The handle has a non-slip rubber sleeve to hold more firmly
• Fast fixing latch with locking function
• Mold Specifications 1/2 \",3/4 \",1 \"(available separately)
*OQVU
WPMUBHF
*OQVU
GSFRVFODZ
*OQVU
DVSSFOU %SJWFVOJU .BY
0VUQVU
3FTFSWPJS
DBQBDJUZ
3BN
4UPLF $PEF
220V 50-60HZ 21.75VA 18V DC 12.7 tons/
125 kN 120 cc 44mm
\"
'VODUJPOBM#BUUFSZ)ZESBVMJD5PPM
1JDUVSF $POUFOU 1FSGPSNBODF 4J[F $PEF
Crimping joint Crimp
capacity 10-
400mm2
112x94x461mm
141x94x59mm
Angle steel
punch head
Angle steel punching
capacity: Angle steel 7mm
Copper plate 7mm
185x83x90mm
Angle cut
decapitation
Angle cutting
capacity :
50x50x6mm
177x140x188mm
Angle cut
Edge head
Angle cutting
capacity :
50x50x6mm
177x140x188mm
Angle bend
Cranked head
Angle steel bending capacity
50x50x6mm Maximum
bending Angle :90°
255x120x105mm
Thin iron
plate punch
Maximum aperture: 4\"
Punching capacity:
Stainless steel 2.0mm
soft steel 3.2mm
110x94x60mm
#BUUFSZ)ZESBVMJD1SFTT5PPM
*OQVUWPMUBHF *OQVUGSFRVFODZ *OQVUDVSSFOU
220V 50-60HZ 21.75VA
)FJHIU 8FJHIU .BY0VUQVU 8PSLQSFTTVSF %SJWFVOJU $PEF
Mould included
10mm 3.1kg 50KN 450bra 18VDC
Hard cutting Steel core alu m i num
stranded head wire 40mmCopper and
aluminum stranded wire 44mm
www.boohergroup.com 254
.BY0VUQVU 0QFSBUJOH
1SFTTVSF 0JM .JOJNVN
\"DDFTT .BYJOVN #BUUFSZ $PEF
10.2tons/100kN 14ton 120cc 6mm 81mm 18V
#BUUFSZ $IBSHJOH5JNF *OQVUDVSSFOU 4J[F
Lithium battery 15 min 200V 50-60Hz 320mm
XFJHIU 4UBOEBSEFRVJQNFOU
10kg Lithium battery, charger, plastic box, shoulder strap each, wedge block x2, 6M screws, 4M
hexagonal rod x2, safety block x2
.BY0VUQVU 0QFSBUJOH
1SFTTVSF 0JM .JOJNVN
\"DDFTT .BYJOVN -FOHUI 4QSFBEJOH
8FJHIU $PEF
10tons/100kN 700bar 78.4cc 6mm 81mm 674mm 10kg
'MBSHF4QSFBEJOH5PPM #BUUFSZ'MBOHF4QSFBEJOH5PPM
• Integral wedge design, does not slide, smooth, parallel wedge blocks
• Integrated hydraulic spreader, hydraulic system with safety valve to avoid
•
• Unique linkage wedge design: there is no risk of first stage bending and
sliding when inserted
• A gap of only 6mm is required when opening
Very few moving parts rugged and minimal maintenance
operation overload, protect the safety of work
can push injured and untenable flanges
• Two-stage quick crimping design
• Precision center of gravity design to use, effortless, easy to hold
• Battery type with high performance and short charging time
• High performance motor for fast operation with 700bar safety valve design
• After the operation is complete, the power saving mode is automatically entered
• With service lights and charging prompts
• Four-section adjustable rocker design allows users to adjust their own torque, more effort.
•
• Flexible thimble design for accurate positioning (removable).
According to the needs, the user can use the extension rod to achieve different lift and pull out requirements.
•
• The main body is equipped with a built-in safety valve, which can avoid the damage of the puller.
The grappling hook and claw seat are forged in chrome-manganese alloy steel, providing the most secure and durable choice. • Anti-loosening grab screw design can prevent the potential danger of loosening the grab structure due to negligence.
0OF5ZQF0G)ZESBVMJD1VMMFS
5PO NN
PGGTFU
TDVUDIJOH
-JGU
1VMM .BJO#PEZ NN $MBXFOENN LH $PEF
NN NN ) &' ( \" # $
4 185 255 60 42 22 84 11 6 22 4.5
6 220 330 70 45 23 94 13 10 22 5.5
8 230 350 85 50 25 122 11 10 25 6.5
12 270 375 85 60 28 118 14 10 29 8.0
20 360 520 111 80 40 160 20 27 33 22.0
30 360 550 111 98 50 155 20 27 38 32.0
/VU4QMJUUFS
• Compact structure, lightweight design; The head can be rotated 180 °;
Single stage feed
• Pressure plate relief valve for easy operation
• Note: The nut hardness cannot exceed HRC-44
• Can not be used to cut stainless steel nuts or square nuts, nut
strength should not be higher than 8
-FOHUI 8FJHIU .BY
1SFTTVSF
0JM
3FRVJSFE .BY0VUQVU #PMU
3BOHF
)FY/VU
3BOHF NN
+BX
0QFOJOH
3BN
4USPLF $PEF
333mm 2.1kg 600bar 56cc 5.7ton/
55.86kN M6-M12 10-19mm 24.3mm 17.3mm
256
255
257
•
• High pressure hand pump adopts two-stage design, large flow and high
pressure.
The pressure can be adjusted as required.
• The pump body is composed of high-strength lightweight metal and rein
forced engineering plastic, which is light in weight and high in strength
• Built-in high and low pressure safety valve, high safety performance.
• When working, please screw the fuel cap to the \"vent\" position, and after
working, screw it to the \"lock\" position.
•
• Standard: 2 meters of tubing 1
High and low pressure fuel inlet design, the piston forward speed is fast
• With a safety valve to reach the set pressure automatic relief
• The maximum operating pressure of external pressure regulator is 700Par
• Vacuum oil sac can be operated at any Angle
• The strong metal structure increases strength and durability and does no
t burn when used in a welding environment
• The lengthened handle design makes the operation more labor-saving and
the oil output faster
• Standard: 2 meters of tubing 1
• All metal structure, suitable for use in a variety of harsh environments
• Simple and compact structure, easy to carry
• Human mechanical design, comfortable operation, simple and convenie
nt, handle operation force is small
• Built-in high and low pressure safety valve to prevent overload operation
• Dual speed design, reduce the number of pressure, improve work efficiency
• The overflow valve in the check valve prevents the load from falling freely
• Suitable for large tonnage hydraulic cylinder and other medium hydraulic
equipment
• Standard: 2 meters of tubing 1
• High and low pressure fuel inlet design, the piston forward speed is fast
• With a safety valve to reach the set pressure automatic relief
• The new pedal two-speed hydraulic pump, the maximum working pressure is 700bar
• The oil can be returned by pressing the drain valve during use
• This product is made of high-strength alloy aluminum, ultra-light only 8.6kg
• Standard: 2 meters of tubing 1
1VNQ 1VNQ
1VNQ 1VNQ
8FJHIU
LH
ᄤᜉ
$PEF
4UPSBHFDBQBDJUZ 3BUFEQSFTTVSF )JHIQSFTTVSFGMPX -PXQSFTTVSFGMPX
1L 700bar 2.5cc/ times 11.5cc/ times 5.0 1
8FJHIU
LH
ᄤᜉ
$PEF
0.72L 700bar 2.26cc/ times12.26cc/ times 9.6 1
ᄤᜉ
8FJHIU
LH
$PEF
7.5L 700bar 5.75cc/ times 125cc/ times 30.0 1 ᄤᜉ
8FJHIU
LH
$PEF
1L 700bar 2.26cc/ times 12.26cc/ times 8.6 1
4UPSBHFDBQBDJUZ 3BUFEQSFTTVSF )JHIQSFTTVSFGMPX -PXQSFTTVSFGMPX
4UPSBHFDBQBDJUZ 3BUFEQSFTTVSF )JHIQSFTTVSFGMPX -PXQSFTTVSFGMPX 4UPSBHFDBQBDJUZ 3BUFEQSFTTVSF )JHIQSFTTVSFGMPX -PXQSFTTVSFGMPX
www.boohergroup.com 256
• Simple operation, easy to use
• Can be equipped with split nut crusher, crimping pliers, cutter and other
single action tools
• Lightweight design, easy to work at altitude
• Equipped with pressure gauge, easy to observe the operation
1VNQ
ᄤᜉ
8FJHIU
LH
$PEF
4UPSBHFDBQBDJUZ 3BUFEQSFTTVSF 7PMUBHFQPXFS 5VCJOHTUBOEBSE
200mL 700bar DC18V 0.6m 4.0 1
• Excellent pressure holding performance
• Suitable for sparkless working environment
• The built-in silencer significantly reduces noise and personnel fatigue
• Air and oil filters reduce contaminants damaging the pump body
• Aluminum alloy pump body and housing are durable and lightweight in one
• Built-in relief valve prevents overload operation
• Unique needle valve guided pressure relief for manual or pedal operation
1VNQ
ᄤᜉ
8FJHIU
LH
$PEF
4UPSBHFDBQBDJUZ 3BUFEQSFTTVSF )JHIQSFTTVSF
PJMPVUQVU
-PXQSFTTVSF
PJMPVUQVU
1.6L 700bar 0.12L/min 0.8L/min 8.6 1
1VNQ
• Wired remote control can control oil production and oil return
• The solenoid valve controls the hydraulic pump
• Can control the inch, can control the oil, stop, oil return and other actions
at any time, so that there is a correct working position in the work
• Equipped with visual hydraulic oil window, you can clearly see whether the
hydraulic oil is within the normal range, which helps to protect the normal
use of the hydraulic pump
• Tubing standard: 2m • It has the function of keeping pressure
8FJHIU
ᄤᜉ
LH
2.4L 700bar AC220V/340W 0.32L/min 2.6L/min 16.0 1
$PEF
1VNQ
• 3 meters wired remote control can control oil production and oil return
• Equipped with a pressure gauge, you can clearly see the pressure required
when crimping or cutting
• Double circuit manual control
• Equipped with visual hydraulic oil window, you can clearly see whether
the hydraulic oil is in the normal range. Helps to protect the normal use of
hydraulic pump
• Small size, light weight, can easily drive 100T crimping machine, 200T crimping
machine work.
8FJHIU
ᄤᜉ
LH
4UPSBHF
DBQBDJUZ 3BUFEQSFTTVSF 7PMUBHFQPXFS )JHIQSFTTVSF
PJMPVUQVU
-PXQSFTTVSF
PJMPVUQVU ᧘᧚
5L 700bar AC220V/0.37kW 0.3L/min 4.0L/min 25.0 1
$PEF
258
4UPSBHFDBQBDJUZ 3BUFEQSFTTVSF )JHIQSFTTVSF
PJMPVUQVU
-PXQSFTTVSF
PJMPVUQVU
257
259
• It is suitable for the crimping of 110kV-220kV transmission line overhead
steel core aluminum stranded wire and intermediate connecting pipe of
steel stranded wire and tension clamp
• The head is a fixed seat for the upper die, which can be rotated and quickly
opened for middle and end crimping operations
• Equipped with quick connector, easy to disassemble
• Connect the single acting hydraulic pump
• It is suitable for the crimping of 110kV-220kV transmission line overhead
steel core aluminum stranded wire and intermediate connecting pipe of
steel stranded wire and tension clamp
• The head is a fixed seat for the upper die, which can be rotated and quickly
• It is suitable for crimping overhead tensioned casing above 110kV and
connecting 220kV underground cable
• Connected to the double acting hydraulic pump, the double acting hydraulic
cylinder can shorten the piston reset time
• The double actuated hydraulic cylinder can eliminate the problem of slow
return of spring fatigue
• Equipped with quick connector, easy to disassemble.
Connect the double acting hydraulic pump
• Cylinder type: double acting
• It is suitable for crimping overhead tensioned casing above 500kV and
connecting 220kV underground cable
• Connected to the double acting hydraulic pump, the double acting hydraulic
cylinder can shorten the piston reset time
• The double actuated hydraulic cylinder can eliminate the problem of slow
return of spring fatigue
• Equipped with quick connector, easy to disassemble.
Connect the double acting hydraulic pump
• Cylinder type: double acting
opened for middle and end crimping operations
• Equipped with quick connector, easy to disassemble.
• The base is removable, and the pressure joint can be hoisted upside down
to carry out aerial work.
•
• Connect the single acting hydraulic pump
Cylinder type: single acting
)ZESBVMJD$SJNQFS)FBE
)ZESBVMJD$SJNQFS)FBE )ZESBVMJD$SJNQFS)FBE
)ZESBVMJD$SJNQFS)FBE
.BY0VUQVU $SJNQJOH$BQBDJUZ 8FJHIU
LH
ᄤᜉ
3BUFEQSFTTVSF $PEF
60.0 tons 700bar
The maximum crimp outer copper/aluminum
diameter of
casing Phi 60mm 25.0 1 The maximum crimp outer diameter of the steel casing Phi 26mm
ᄤᜉ
.BY0VUQVU $SJNQJOH$BQBDJUZ 8FJHIU
LH
100.0 tons 700bar
The maximum crimp outer diameter of the
3BUFEQSFTTVSF $PEF
copper/aluminum casing Phi 76 mm The maximum crimp outer diameter of the steel
casing Phi 36mm
31.0 1
.BY0VUQVU $SJNQJOH$BQBDJUZ 8FJHIU
LH
ᄤᜉ
3BUFEQSFTTVSF $PEF
200.0 tons 700bar
The maximum crimp outer diameter of the copper/aluminum casing Phi 100mm The maximum crimp outer diameter of the steel casing Phi 50mm 85.0 1
.BY0VUQVU $SJNQJOH$BQBDJUZ 8FJHIU
LH
ᄤᜉ
3BUFEQSFTTVSF $PEF
60.0 tons 700bar
The maximum crimp outer diameter of
copper/aluminum casing Phi 60mm
The maximum crimp outer diameter of the
steel casing Phi 26mm
20.0 1
www.boohergroup.com 258
• It is suitable for cutting off metal materials such as copper and aluminum
• The cutting speed is fast, the cutting surface is flat and unchanged, no fine
debris is produced, and the resulting cutting material is easy to recover
• The V-shaped cutting edge design can ensure that the cutting surface is
not dented and the effective contact area of the busbar row is ensured
• The machine is equipped with a scale plate to facilitate the center adjust
ment of the copper and aluminum rows to ensure that both sides are cut at
the same time to protect the blade from being damaged
• The lightweight body can be carried to the site or fixed in the factory for
mass cutting operations
• Equipped with quick connector, easy to disassemble
• Connect the single acting hydraulic pump
#VTCBSDVUUJOHUPPM
.BY0VUQVU 8FJHIU
LH
ᄤᜉ
3BUFEQSFTTVSF $PEF .BYJNVNESBJOBHF
UIJDLOFTT
.BYJNVNSPX
XJEUI
25.0 tons 700bar 12mm 150mm 28.0 1
• Perfect upright base for cutting solid copper-aluminum busbar
• Stable and accurate cutting
• The V-shaped cutting edge design can ensure that the cutting surface
is not dented and the effective contact area of the busbar row is ensured
• The cutting surface is flat without deformation, and the blade is ultrathin design to reduce a large amount of waste
• Can be carried to the field or fixed plant for large volume cut-off operations
• Connect the single acting hydraulic pump
• Super light body only 16kg
#VTCBSDVUUJOHUPPM
22.0 tons 700bar 12mm 160mm 16.0 1
• It is suitable for bending metal materials such as copper and aluminum bars
• Equipped with an Angle plate for easy viewing of the bending Angle, the ma
ximum bending Angle is 90 °
• The machine adopts open-type structure, which is easy to take out the wo
rkpiece after bending
• The lightweight body can be carried to the site or fixed in the factory for
mass operations
• The workpiece surface will not be damaged after bending
• Equipped with quick connector, easy to disassemble
• Connect the single acting hydraulic pump
• It is suitable for bending metal materials such as copper and aluminum bars
• Equipped with an Angle plate for easy viewing of the bending Angle, the ma
ximum bending Angle is 90 °
• The machine adopts open-type structure, which is easy to take out the wo
rkpiece after bending
• The lightweight body can be carried to the site or fixed in the factory for
mass operations
• The workpiece surface will not be damaged after bending
• Equipped with quick connector, easy to disassemble
• Connect the single acting hydraulic pump
#VTCBSCFOEJOHUPPM
15.0 tons 700bar 12mm 150mm 20.0 1
#VTCBSCFOEJOHUPPM
20.0 tons 700bar 12mm 200mm 28.0 1 260
.BY0VUQVU 8FJHIU
LH
3BUFEQSFTTVSF $PEF .BYJNVNESBJOBHF
UIJDLOFTT
.BYJNVNSPX
XJEUI
.BY0VUQVU 8FJHIU
LH
3BUFEQSFTTVSF $PEF .BYJNVNESBJOBHF
UIJDLOFTT
.BYJNVNSPX
XJEUI .BY0VUQVU 8FJHIU
LH
3BUFEQSFTTVSF $PEF .BYJNVNESBJOBHF
UIJDLOFTT
.BYJNVNSPX
XJEUI
259
261
• It is suitable for punching L-shaped Angle steel, H-shaped I-beam, flat
steel, copper, aluminum bar and other materials
• The fuselage is made of high strength forged steel
• The punching speed is fast, the punching mouth is smooth and no burrs,
the positioning plate design, and the fixing point is accurate and not offset
• Hydraulic punching can eliminate the chip generated during drilling, and t
he operation is safer and cleaner
• It can be carried to the site or fixed in the factory for mass punching operations
• The throat depth of 80mm can be more convenient and faster to compl
• noitarepognihcnupehttee nector,nockciuqhtiwdepipuqE easy to disassemble
• Connect the single acting hydraulic pump
• Standard: 10.5, 13.5, 17.5, 20.5mm punching die fixed wrench and hex wrench
• Optional accessories: with 8.5, 11.5, 15.5, 18.5mm punching die
• It is suitable for punching L-shaped Angle steel, H-shaped I-beam, flat
steel, copper, aluminum bar and other materials
• The fuselage is made of high strength forged steel
• The punching speed is fast, the punching mouth is smooth and no burrs,
the positioning plate design, and the fixing point is accurate and not offset
• Hydraulic punching can eliminate the chip generated during drilling, and t
he operation is safer and cleaner
• It can be carried to the site or fixed in the factory for mass punching operations
• The throat depth of 80mm can be more convenient and faster to compl
• noitarepognihcnupehttee nector,nockciuqhtiwdepipuqE easy to disassemble
• Connect the single acting hydraulic pump
• Standard: 10.5, 13.5, 17.5, 20.5mm punching die fixed wrench and hex wrench
• Optional accessories: with 8.5, 11.5, 15.5, 18.5mm punching die
)ZESBVMJD1VODIFS )ZESBVMJD1VODIFS
.BY0VUQVU 8FJHIU
LH
ᄤᜉ
.BYJNVNUIJDLOFTT 5ISPBUEFQUI $PEF
31.0 tons Copper, aluminum plate 13mm
ordinary steel plate 10mm
Copper, aluminum plate 13mm
ordinary steel plate 10mm 80mm 13.5 1 31.0 tons 80mm 13.5 1
• Professional cut off transmission and distribution of high voltage towers，
Bridges and other Angle steel
• The cutting speed is fast, no noise, the cutting surface is neat and solv
es the trouble caused by sparks caused by other cutting methods
• Equipped with quick connector, easy to disassemble
• Professional cut off transmission and distribution of high voltage towers，
Bridges and other Angle steel
• The cutting speed is fast, no noise, the cutting surface is neat and solv
es the trouble caused by sparks caused by other cutting methods
• Equipped with quick connector, easy to disassemble
)ZESBVMJDBOHMFTUFFMDVUUJOHUPPM )ZESBVMJDBOHMFTUFFMDVUUJOHUPPM
.BY0VUQVU 8FJHIU
LH
ᄤᜉ
3BUFEQSFTTVSF $VUPGGDBQBDJUZ $PEF
23.0 tons 700bar 75x75x8mm 19.0 1
.BY0VUQVU 8FJHIU
LH
ᄤᜉ
3BUFEQSFTTVSF $VUPGGDBQBDJUZ $PEF
31.0 tons 700bar 110x110x10mm 41.0 1
.BY0VUQVU 8FJHIU
LH
.BYJNVNUIJDLOFTT 5ISPBUEFQUI $PEF
www.boohergroup.com 260
• It is suitable for bending of small copper-aluminum busbar 40mm or less
in transformer factory and industrial and mining enterprises
• The bending R Angle is only 40mm, and the shortest bending operation
of 170mm length copper and aluminum bars can be achieved
• Angle marking to ensure bending quality
• Open type, easy to take out the workpiece
• The body material is made of strong and tough alloy steel, light weight,
easy to carry, smooth bending and row
• Equipped with quick connector, easy to disassemble
• It is suitable for bending of copper and aluminum busbars 125mm and b
• Connect the single acting electric hydraulic pump
elow in power plants and substations
• Horizontal bending and vertical bending can be used to achieve dual use
of one machine
• Angle marking to ensure bending quality
• 25 tons of output hydraulic cylinder, powerful, fast speed, high efficiency
• Adopts open-cover type, easy to take out the workpiece
• The body material is made of strong and tough alloy steel, light weight, ea
sy to carry, smooth bending and row
• Equipped with quick connector, easy to disassemble
• Connect the single acting electric hydraulic pump
• It is equipped with a fixed frame to ensure that it maintains a horizontal state when working
• Vertical bend support (4pieces6block
• Standard: 1 wrench (19 inches), 1 hex wrench (5mm, 8mm, 10mm), 1 flat
bending die, 1 set of vertical bending die base,
• Vertical bending die 8 pay (40-80x4 40-80x5 40-80x6 40-80x8 40-80x10
100- 100 120-125 × 12)
,5,6,8,10,12),
• Cylinder connection screw one
.VMUJGVODUJPOBMCVTCBSCFOEJOHUPPM .VMUJGVODUJPOBMCVTCBSCFOEJOHUPPM
.BY0VUQVU 8FJHIU
LH
ᄤᜉ
3BUFEQSFTTVSF .BYJNVNCFOEJOHDBQBDJUZ $PEF
12.0 tons 700bar Copper and aluminum rows 40mm x 8mm 12.0 1
ᄤᜉ
25.0 tons × ×
.BY0VUQVU 8
F
L
J
H
H
IU
3BUFEQSFTTVS $PEF
700bar 125mm
Copper/Aluminum Bar
Copper/Aluminum Bar Copper/Aluminum Bar
Copper/Aluminum Bar
16mm 125mm 12mm
• It is suitable for bending of
copper and aluminum busbars 125mmand belower plants and substations
52.5 1
•
• Flat bending, vertical bending, bending pipe can be, three in one, to ac
hieve three uses of one machine
Angle marking to ensure bending quality
• 25 tons of output hydraulic cylinder, powerful, fast speed, high efficiency
•
•
•
•
•
Adopts open-cover type, easy to take out the workpiece
• Standard: Open wrench (19 inches), hex wrench (5mm, 8mm, 10mm) each 1
• 1 flat bending die, 1 set of vertical bending die base,
• Vertical bending die 8 pay (40-80x4 40-80x5 40-80x6 40-80x8 4 80x10-0 100
x10 100-125x10 120-125x12),
• Vertical bend support block 6 pieces (4,5,6,8,10,12)
• Cylinder connection screw one
• 7 pipe bending die ( 1/2 3/4 1 11/2 2 21/2 3) , 2 die, 1 bend middle screw
.VMUJGVODUJPOBMCVTCBSCFOEJOHUPPM
.BY0VUQVU 8FJHIU ᄤᜉ
LH
$PEF .BYJNVN
CFOEJOH
25.0 tons 700bar 125mm ×16mm 125mm ×12mm
DBQBDJUZ
3\" 55.0 1
• Application: apply a thin electric tube 15 mm (5/8 ') to 75 mm (3 \"), 18 mm thick elec
•
• Equipped with quick c
• 1/2 \"~ 2\" a molding 90 °
• Suitable for general water pipe, wire pipe, gas pipe, thick steel pipe Angle
bending 90
°
, smooth bending, will not cause wrinkles
onnector, easy to disassemble
Aviation aluminum makes the machine lighter, stronger and easier to carry
tric pipe (1/2 \"), - 104 - mm (4 '), gas pipe 15 mm (1/2 \") - 100 mm (4 ')
• Optional accessories: Bending die 1/2 3/4 1 114 11/2 2 21/2 3 4
.VMUJGVODUJPOBMCVTCBSCFOEJOHUPPM
ᄤᜉ
.BY0VUQVU 8FJHIU
LH
3BUFEQSFTTVSF $PEF .BYJNVNCFOEJOH
DBQBDJUZ
20.0 tons 700bar 4\" 35.0 1 262
.BYCFOEJOH
DBQBDJUZ
.BYWFSUJDBM
CFOEJOHDBQBDJUZ
The body material is made of strong and tough alloy steel, which is lightweight, easy
to carry, and has smooth bending and bending
Equipped with quick connectors for easy disassembly
Equipped with a fixed bracket to ensure a horizontal state during operation
Connect single action electric hydraulic pump
.BYCFOEJOH
DBQBDJUZ
.BYWFSUJDBM
CFOEJOHDBQBDJUZ 3BUFEQSFTTVS
261
263
• Designed for contact line installation or maintenance when the use of
wire clamping device or other devices after the production of hard point
deformation Local straightening
• The straightener is suitable for 85-150mm2 silver copper wire or mag
nesium copper wire copper alloy contact wire
• The positioning function at the end of the slide-in connector can quickl
y and accurately install the tool contact line and prevent the connector f
pushedebnaceicveddeixfehT.tuognidilsmor whenout disassembling
• ngiseddetargetIn noitarepoysaerof
• The head can be rotated 180 °
• High performance, high capacity 18V lithium battery with fast charger
• Equipped with LED work light, make work more convenient
• Suitable for single or double side
railway ground plug installation
• Split design, easy to operate
• Replaceable rivet mandrel to facilitate rive t
of different sizes
• High and low pressure two-stage pressurization system, low pressure la
rge flow, high pressure small flow, improve efficiency
• With safety valve to ensure safety, and automatic pressure relief, to ens
ure the quality of construction
• Designed for use in contact wire installation or maintenance or other clamp
• With manual pressure relief valve, can ensure that the riveting head quickly back
• The protruding hard point deformation produced after the device tightens the
line is used for local straightening
• silvermm copper orwire magnesium copper 2 The straightener 150-85forsuitableis
• Wire copper alloy contact wire
• The end of the slip-in clamp has a positioning function to quickly and accura
tely install the tool contact line and prevent the clamp from sliding out. When
disassembling, the head can be rotated 180 ° by pushing the fixed device outward
$POUBDUXJSFTUSBJHIUFOJOHUPPM
1VMMSJWFUJOHNBDIJOF
$POUBDUXJSFTUSBJHIUFOJOHUPPM
.BY0VUQVU 8FJHIU
LH
3BUFEQSFTTVSF \"MJHONFOUSBOHF $PEF
10.0 tons 700bar 80-150mm2 6.5 1
.BY0VUQVU 8FJHIU
LH
3BUFEQSFTTVSF \"MJHONFOUSBOHF $PEF
5.0 tons 700bar 80-150mm2 4.0 1
8FJHIU
LH
4ZTUFN
QSFTTVSF
8PSLJOH
TUSPLF
0VUQVUXPSLJOH
QSFTTVSF -FOHUI 0QFSBUJOH
UFNQFSBUVSF
9135PSI 5.8Ton 34mm 360mm -20 - +40 3.6 1
$PEF
thirdThe step, according differentto
plug models, select the gage to check
the aperture
Second, use a chamfering knife to
chamfer the holes at both ends
Step one, drill holes in the rails
Step 4 (\" nstall), doublethei -sided rail plug Step 4 (# Install) single -sided rail plugs Step 5 ( \"), push the puller through
the hex socket of the double-sided
plug and turn the puller into the
screw hole
Step 5 (#), push the pin through the hex
socket of the single-sided plug and turn
the pin into the screw hole
Step 6 ( \"), operate the riveter and pull the
stud through the inner hole of the stud
Step 6 (# operate), the riveter and pull the
stud through the inner hole of the stud
Tool usage Examples
www.boohergroup.com 262
• Use: three core cable is peeled
• Application: 10kV, 20kV, 35kV main insulation layer stripping
• It has the function of flat cutting and spiral cutting
• The cutting edge is replaceable
• Interchan
• Application: 10kV can be stripped except semiconductor layer stripping
geable blade
$BCMFKBDLFUTUSJQQFS $BCMFQSFQBSBUJPO
$BCMFQSFQBSBUJPO $BCMFQSFQBSBUJPO
$BCMFQSFQBSBUJPO $BCMFQSFQBSBUJPO
8FJHIU 4USJQQJOHUIJDLOFTT 0QFSBUJOHEJBNFUFS LH
ᄤᜉ $PEF
0-15mm Maximum screw diameter 220mm 0.7 1
ᄤᜉ
• Operation: Easy to operate, with spiral - left or right spiral
• The depth of the blade can be adjusted up to 2mm, the adjustment kn
ob is carved 0-0.9mm, and the depth of each cut feed is 0.1mm
• The depth of the blade can be adjusted at any time during the advance process
8FJHIU \"QQMJDBCMFDBCMFEJBNFUFS LH
.JOJNVNIBSEOFTTPGFEHF $PEF
16-41mm 52HRC 0.3 1
ᄤᜉ
8FJHIU 'FFEEFQUI LH
$PEF
$IBNGFSEJBNFUFSSBOHF $IBNGFSTJ[F LH
ᄤᜉ $PEF
φ18mm-φ32mm 3x45° 0.2 1
ᄤᜉ
0-1.5mm 0.6 1 φ32mm-φ54mm 3x45° 0.2 1
$IBNGFSEJBNFUFSSBOHF $IBNGFSTJ[F LH
$PEF
ᄤᜉ
$VUUJOHUIJDLOFTT \"QQMJDBCMFDBCMFEJBNFUFS $PEF
5mm Φ25mm or more 1
• Compact structure, small and light, high exploitation efficiency
8FJHIU
• The structure is reliable and the exploitation efficiency is high
• Use: 35kV non-peeling semiconductor layer
• The stripping edge has a chamfer, and the outer semi-conductive layer
produces chamfer during large cutting
• Unidirec tional stripping • Interchangeable blade • Advantages: Fixed o
n the cable as a fixture stable
8FJHIU
264
1PXFSFE5PSRVF4ZTUFN
www.boohergroup.com 264 266
Size
ᄤᜉ
Q
3/4\" 100-350 15 2.9 206 61 68 210 1
3/4\" 150-500 10 2.9 256 61 68 210 1
3/4\" 175-700 13 3.1 235 63 68 210 1
3/4\" 230-800 6 3.3 283 63 68 210 1
3/4\" 285-1200 4.7 3.3 283 63 68 210 1
3/4\" 300-1400 6 3.3 253 63 68 210 1
1\" 550-1700 4 5.3 328 78 78 210 1
1\" 400-2000 3.5 5.8 249 70 70 240 1
1\" 600-2150 3.5 5.3 359 78 78 210 1
1\" 700-2800 3.5 5.8 316 78 78 210 1
1\" 900-3100 2.5 5.8 316 78 78 210 1
1\" 810-4000 2 6.1 312 82 82 210 1
1\" 1200-4450 10 8.3 378 86 86 210 1
Size
ᄤᜉ
3/4\" 100-300 15 2.9 256 62 68
3/4\" 120-400 10 2.9 256 62 68 207 1
207 1
3/4\" 150-500 9.5 2.9 256 62 68 207 1
3/4\" 175-700 13 3.6 284 65 68 207 1
3/4\" 240-800 4.8 3.8 293 65 68 207 1
3/4\" 400-1200 3.2 3.8 293 65 68 207 1
3/4\" 280-1400 6 3.8 293 65 68 207 1
1\" 550-1700 5 5.3 419 78 78 207 1
1\" 400-2000 4 4.1 299 69 69 207 1
1\" 650-2100 4.5 5.3 419 78 78 207 1
1\" 850-2800 4 5.8 356 78 78 207 1
1\" 1000-3100 2.5 5.8 356 78 78 207 1
1\" 800-4000 2 6.1 362 81 81 207
1\" 800-4450 11 8.2 420 86 86 210 1
1
3FDIBSHFBCMF&MFDUSJD5PSRVF8SFODI
3FDIBSHFBCMFFMFDUSJDUPSRVFXSFODI
• The digital display torque setting can increase or decrease
the target value in 10Nm units;
• Torque value up to 4000Nm;
• Equipped with the latest lithium-ion technology;
• Suitable for pre-torque and maintenance work without
power or air compression;
• Preset torque values are available
• The latest 18V lithium battery charging technology
• Torque accuracy up to +/-5%
• Automatic two-speed gearbox
• Patented product
New digit al t orque Set t ings
The t orque value can reach 4000Nm
The new design provides unmatched torque output for a wide range of
applications and reliability, while combining the new torque display with
the button. Make it easier for users to select target torque values. This
• Especially suitable for the work environment
without power source
product is also a patented product.
New digit al t orque Set t ings
The t orque value can reach 4000Nm
The new design provides unmatched torque output for a wide range of
applications and reliability, while combining the new torque display with
the button. Make it easier for users to select target torque values. This
product is also a patented product.
www.boohergroup.com
WEIGHT(Kg)
(Battery not included)
WEIGHT(Kg)
(Battery not included)
265
267
3/4\" φ50 259x65x250 70-350 3.1 6bar ᄤᜉ1
3/4\" φ59 272x75x252 160-800 4.3 6bar 1
3/4\" φ72 283x75x252 200-1000 5.7 6bar 1
1\" φ72 283x75x252 200-1000 5.7 6bar 1
1\" φ92-φ59 370x100x267 400-2000 8.8 6bar 1
1\" φ92-φ59 370x100x267 500-2500 9.3 6bar 1
1 1/2\" φ108-φ59 400x108x270 800-4000 12 6bar 1
1 1/2\" φ108-φ59 400x108x270 1000-5000 12 6bar 1
1 1/2\" φ126-φ59 488x100x264 1200-6000 16 6bar 1
• Can be used for high torque, continuous working conditions
• Smooth rotation, no stamping
• Reaction lever, gear box and gun body connection can be freely rotated, which can facilitate the reaction arm to quickly rely on the support point
• Aluminum alloy handle, relatively light weight
• There are clockwise (CW) and counterclockwise (CCW) pull rods, which can be controlled as required
1OFVNBUJD5PSRVF8SFODI
Pneumat ic t orque wrench is widely used in aut omot ive vehicles,
pet rochemical, shipbuilding, elect ric power, aerospace, const ruct ion
• It can be equipped with the pneumatic sleeve suitable for the output square tenon, which can easily tighten and loosen the hexagonal bolts of various specifications
engineering and ot her f ields
Tower mounting Blade installation
Hub mounting Engine room installation
Hydraulic torque wrenches are widely used in the production,
installation and maintenance of wind power fields
www.boohergroup.com 266 268
267 269
1206 130 1206 136
112-1120
14-30
1.8
110.8
139.3
42
65.8
76.2
108.1
20.5
68.3
7200-72000
72-125
87
400
516
160
223
291
341
81
259
1206 148 1206 156 1206 164 1206 172 1206 180 1206 190 1206 200 1206 220 1206 225
www.boohergroup.com 268 270
1206 130 1206 136 1206 148 1206 156 1206 164 1206 172 1206 180 1206 190 1206 200 1206 220 1206 225
269
271
www.boohergroup.com 270 272
1206 360 1206 380 1206 405 1206 415 1206 455
271
273
1206 360 1206 380 1206 405 1206 415 1206 455
www.boohergroup.com 272 274
1206 360 1206 380 1206 405 1206 415 1206 455
273
275
1206 360 1206 380 1206 405 1206 415 1206 455
BHW-2/S19
BHW-2/S22
BHW-2/S27
BHW-2/S30
BHW-2/S32
BHW-2/S34
BHW-2/S36
BHW-2/S41
BHW-2/S46
BHW-2/S50
BHW-2/S55
BHW-2/S60
BHW-4/S34
BHW-4/S36
BHW-4/S41
BHW-4/S46
BHW-4/S50
BHW-4/S55
BHW-4/S60
BHW-4/S65
BHW-4/S70
BHW-4/S75
BHW-4/S80
BHW-8/S41
BHW-8/S46
BHW-8/S50
BHW-8/S55
BHW-8/S60
BHW-8/S65
BHW-8/S70
BHW-8/S75
BHW-8/S80
BHW-8/S85
BHW-8/S90
BHW-8/S95
BHW-8/S100
BHW-8/S105
BHW-14/S50
BHW-14/S55
BHW-14/S60
BHW-14/S65
BHW-14/S70
BHW-14/S75
BHW-14/S80
BHW-14/S85
BHW-14/S90
BHW-14/S95
BHW-14/S100
BHW-14/S105
BHW-14/S110
BHW-14/S115
BHW-14/S117
BHW-30/S85
BHW-30/S90
BHW-30/S95
BHW-30/S100
BHW-30/S105
BHW-30/S110
BHW-30/S115
BHW-30/S117
BHW-30/S120
BHW-30/S125
BHW-30/S130
BHW-30/S135
BHW-30/S140
BHW-30/S145
BHW-30/S150
BHW-30/S155
BHW-30/S160
BHW-30/S165
BHW-30/S170
BHW-30/S175
www.boohergroup.com 274 276
$PEF
1205 802
$PEF
1205 826
-POH
ἷNἸ
ἱ
1JQFEJBNFUFS
ἷ*/Ἰ
8PSLQSFTTVSF
ἷ#BSἸ
#SPLFOQSFTTVSF
ἷ#BSἸ
Ɣ&RPSDFWGHVLJQRIK\\GUDXOLFWRUTXHZUHQFKGHGLFDWHG
SXPSZLWKWKUHHVWDJHIORZ.
Ɣ6XLWDEOHIRUV\\QFKURQRXVRSHUDWLRQRIWZRZUHQFKHV IRXU
V\\QFKURQRXVZRUNLQJSXPSVFDQEHRSWLRQDOO\\VHOHFWHG
Ɣ6WDLQOHVVVWHHOKDQGOHSURWHFWLRQEUDFNHW
Ɣ3UHFLVLRQSUHVVXUHJDXJH
Ɣ6PRRWKDGMXVWPHQWRISUHVVXUHEHWZHHQEDU.
Ɣ&RQILJXUHIRUKRXUFRQWLQXRXVRSHUDWLRQ
Ɣ 7KHKRWWHVWWHPSHUDWXUHLVGHJUHHV
Ɣ $LUFRROHGRLOWHPSHUDWXUHFRROLQJV\\VWHP
Ɣ/LJKWZHLJKWGHVLJQRIWKHERG\\HDV\\WRFDUU\\ZHLJKLQJRQO\\
.J
Professional pump for Hydraulic torque wrench
)RXUV\\QFKURQRXV
ZRUNLQJSXPSVFDQEH
RSWLRQDOO\\VHOHFWHG
275
277
$PEF
1205 801
1205 803
Ɣ&RPSDFWGHVLJQRIK\\GUDXOLFWRUTXHZUHQFKGHGLFDWHG
SXPSZLWKWKUHHVWDJHIORZ.
Ɣ6XLWDEOHIRUV\\QFKURQL]LQJWZRZUHQFKHV IRXUV\\QFKUR
QRXVZRUNLQJSXPSVFDQEHRSWLRQDOO\\VHOHFWHG
Ɣ,URQSLSHKDQGOHSURWHFWLRQEUDFNHW
Ɣ3UHFLVLRQSUHVVXUHJDXJH
Ɣ6PRRWKDGMXVWPHQWRISUHVVXUHEHWZHHQEDU.
Ɣ&RQILJXUHIRUKRXUFRQWLQXRXVRSHUDWLRQ
Ɣ 7KHKRWWHVWWHPSHUDWXUHLVGHJUHHV
Ɣ $LUFRROHGRLOWHPSHUDWXUHFRROLQJV\\VWHP
Ɣ&RPSDFWGHVLJQRIK\\GUDXOLFWRUTXHZUHQFKGHGLFDWHG
SQHXPDWLFSXPSZLWKWKUHHVWDJHIORZ.
Ɣ6XLWDEOHIRUV\\QFKURQL]LQJWZRZUHQFKHV IRXUV\\QFKUR
QRXVZRUNLQJSXPSVFDQEHRSWLRQDOO\\VHOHFWHG
Ɣ,URQSLSHKDQGOHSURWHFWLRQEUDFNHW
Ɣ3UHFLVLRQSUHVVXUHJDXJH
Ɣ6PRRWKDGMXVWPHQWRISUHVVXUHEHWZHHQEDU.
Ɣ&RQILJXUHIRUKRXUFRQWLQXRXVRSHUDWLRQ
Ɣ,QSXWJDVVRXUFHDWflEDU.
Professional pump for Hydraulic torque wrench
Professional pump for Hydraulic torque wrench
)RXUV\\QFKURQRXVZRUNLQJ
SXPSVFDQEHRSWLRQDOO\\VHOHFWHG
)RXUV\\QFKURQRXVZRUNLQJ
SXPSVFDQEHRSWLRQDOO\\VHOHFWHG
1PXFS5PPMT
277 279
$PSEMFTT%VUZ*NQBDU%SJMM
)FBWZ%VUZ*NQBDU8SFODI
ᄤᜉ
600N.m 0-1600 0-3200 4.0Ah 18V 3209 606 3209 501 1
• Small size, nylon case, ergonomic soft handle, comfortable operation
• 13mm single set keyless chuck and quick drill change
• Durable all-metal gear box with built-in high-precision bearings (instead
of traditional plastic bushings)
• The drilling vibration is small and the concentricity is high
• Forward/backward variable speed with brake
• 3 functions: Screw, push, hammer drill
• Automatic spindle locking for easy tool change
• LED lights illuminate the work area with removable belt clips for efficient
and safe operation
• Motor: Uniquely powerful, fast and efficient 735 Mabuchi motor
• Gear: Two-speed gear with impact
• Torque setting: 18 + 1 (drill) + 1 (hammer)
• Voltage: 18V
• 1/2\" square head drive
• Robust metal gear drive system
• Rugged aluminum housing, ergonomic
• Forward/backward variable speed with brake
• LED lights illuminate the work area with removable belt clips for efficient
and safe operation
• Motor: Split type quadrupole motor
3FDIBSHFBCMFCSVTIMFTTUXPTQFFETIBGUMPDL XJUIJNQBDU
FMFDUSJDESJMM
• Small size, nylon case, ergonomic soft handle, comfortable operation
• 13mm single set keyless chuck and quick drill change
• Durable all-metal gear box with built-in high-precision bearings (instead
of traditional plastic bushings)
• The drilling vibration is small and the concentricity is high
• Forward/backward variable speed with brake
• 3 functions: Screw, push, hammer drill
• Automatic spindle locking for easy tool change
• LED lights illuminate the work area with removable belt clips for efficient
and safe operation
• Rated voltage: 18V2000mA
Lithium battery Capacity: 2.0Ah
• Motor: Unique powerful, fast and efficient motor
• Gear: Two-speed gear with impact
• Torque setting: 18 +1 (drill) +1 (hammer)
ᄤᜉ 40N.m 0-400
0-1500
0-6000
0-22500 2.0Ah 18V 3209 603 3209 501 1
ᄤᜉ 40N.m 0-400
0-1600
0-6000
0-22500 2.0Ah 18V 3209 601 3209 502 1
40N.m 0-400
0-1600 2.0Ah 18V 3209 601 3209 502 1
$PSEMFTT3JWFUFS
#550 19mm 9000N.m 2.0Ah 18V 3209 605 3209 501 ᄤᜉ1
• Ideal for off-line outdoor riveting, widely used for aluminum, steel, stain
less steel and copper rivets up to 5.0 mm in diameter. Compact size, nylon
housing, ergonomic soft handle for comfortable operation. LED lights illuminate
the work area to provide practical transport and storage bins;
• Spindle maximum diameter: 5 mm
• General accessories: 1 4.8mm / 5mm × 1.0mm nose piece (mounted on
the main body) 1 × 2.4mm, 1 × 3.0/3.2mm, 1 × 4.0mm nose piece,
1× open wrench
5PQVQIJU
/PDIBSHF
$BQBDJUZ 7PMUBHF #BUUFSZ
DPEF
$IBSHFS
DPEF
$BQBDJUZ 7PMUBHF #BUUFSZ
DPEF
$IBSHFS
DPEF
$BQBDJUZ 7PMUBHF #BUUFSZ
DPEF
$IBSHFS
DPEF $BQBDJUZ 7PMUBHF #BUUFSZ
DPEF
$IBSHFS
DPEF
www.boohergroup.com 278
$PSEMFTT\"OHMF(SJOEFS
9000 M14 115/125 4.0Ah 18V 3209 604 3209 501 ᄤᜉ1
• Compact size, nylon shell, ultra-thin design, ergonomic design;
• Soft start features and restart protection ensure safer use;
• Due to the separation of the motor and transmission, the operation is very smooth
• Disk guard with quick adjustment function
• Rugged aluminum gear box
• Additional handles can be flexibly installed in 3 positions
• Recommended for best results: 3.0 Ah battery or higher
• Motor: # 887 powerful Mabuchi motor
• Universal accessories: 1 handle and 1 wrench
$PSEMFTT7BDVVN$MFBSOFS
18V Mabuchi #550 2.0Ah 3209 603 3209 501 ᄤᜉ1
• TPE injection molded ABS housing
• Low/high speed, two speed control
• Duration: High speed setting: 13 minutes; Low speed setting: 20 minutes
• Fan speed: High speed: 8.0 m/s; Low speed: 6.5 m/s
• General accessories: 1 long tube, 1 mop, 1 flat mouth
brushless motors must undergo strict reliability tests to ensure quality.
#SVTIFENPUPSBOECSVTIMFTTNPUPSQSJODJQMFBOEGVODUJPOEJFSFODF
#SVTIMFTTNPUPSXPSLJOHQSJODJQMF 8PSLJOHQSJODJQMFPGCSVTINPUPS
280
www.boohergroup.com
When the motor is working, the coil and commutator rotate, the magnetic steel and the carbon brush do not rotate, and the altenating change in the direction of the
coil current is completed by the commutator and brush rotating with the motor.Industy brush motor is divided into high-speed brush motor and low-speed brush
mator. There are many dferences between brushed motors and brushless motors, and it can be seen from the name that brushed motors have carbon brushes and
brushless motors have no carbon brushes.
The brushless DC motor is composed of the motor body and the driver, which is a typical mechatronics product. Because the brushless DC motor is operated in
automatic control mode, it will not add starting windings to the rotor as the synchronous motor started under frequency conversion speed regulation, and will not
produce oscillation and out-of-step when the load changes.
From the product market point of view: brush motor is a traditional product, the performance is relatively stable. Brushless motor is an upgrade, product, and its life
performence is better than that of brushed motor. Howenver, its control circuit is more complex, and the aging screening requirements for components are more strict.
Although the motor has a long lfe, the control circuit is prone to trouble. Therefore, the selction of In principle: the brush motor means that the motor is a direct current
input, and the controller that controls it can only provide the stze of the current to speed regulation; The brushless motor is actully a three-phase AC motor, which relies
on the controller to convert the direoct current into three-phase AC, and according to the sensor Hall element in the motor, the motor can operate normally. Drectly
speaking from this principle, the brushless motor has a longer life than the brushed motor and starts to save power, but the controller is more expensive than the
brushed controller.
$BQBDJUZ 7PMUBHF #BUUFSZ
DPEF $BQBDJUZ #BUUFSZ
DPEF
$IBSHFS
DPEF
$IBSHFS
DPEF
279
281
$PSEMFTT4DSFXESJWFS 3PUBSZ)BNNFS
$IBJO4BX $PSEMFTT1SVOFS
• Nylon case for comfortable operation
• 2 working modes: drill, hammer drill
• Suitable for SDS-plus drill system
•
• Drilling capacity: Wood 25mm; Steel 13mm; Concrete 22mm
• Accessories: Handle, positioning ruler
Keyless drill chuck, easy to use
• Two-speed design, can do electric screw batch can also do electric drill
• Maximum drilling diameter: iron 10mm; Wood 25mm
• Maximum screw diameter: M8
• Maximum length 2700mm, can cut high-altitude branches
• Imported Origan guide, saw chain, tough and wear-resistant
• Tool free adjustment, convenient and fast
•
• Shoulder strap design, easy to operate
High power 84V brushless motor
• Imported Origan guide, chain
• Double knob adjustment stop and chain tensioning
• Double safety switch
• Reinforcing hand guard plate
/PMPBE
TQFFE
*NQBDU
GSFRVFODZ
ᄤᜉ
$PEF
0-1050 0-5000 1.2J 4.0Ah 18V 3209 601 3202 001 1
/N NN /PMPBE
TQFFE
ᄤᜉ
$PEF
18 1-10 21+1 Low speed 0-400
High speed 0-1400 12V 13 1
$BQBDJUZ
NM
-FOHUI
NN
ᄤᜉ $PEF
10\" 2500.00 250 60 1880-2700 18V 2.0 Ah 1
.BYDVUUJOH
-FOHIUNN
ᄤᜉ
$PEF
18\" 7500.00 450 84V 2.5 Ah 1
7PMUBHF $BQBDJUZ
7PMUBHF $BQBDJUZ 7PMUBHF $BQBDJUZ
$BQBDJUZ 7PMUBHF
4J[F
.BY)PME
.BYTQFFE
31.
.BYDVUUJOH
-FOHIUNN
.BYIBNNFSJOH
GPSDF
#BUUFSZ
DPEF
$IBSHFS
DPEF
4J[F .BYTQFFE
31.
5PSRVF
\"EKVTUNFOU
www.boohergroup.com 280
$PSEMFTT#SVTIMFTT\"OHMF(SJOEFS
$PSEMFTT#SVTIMFTT*NQBDU8SFODI
$PSEMFTT#SVTIMFTT3PUBZ)BNNFS
$PSEMFTT#SVTIMFTT4DSFXESJWFS
$PSEMFTT#SVTIMFTT%SJMM
• Small size, reinforced nylon case,
ergonomic soft handle, comfortable
operation.
• Brushless motor, strong power
• 10mm self-tightening drill chuck,
easy to operate
• Two-speed design, can do electric
screw batch can also do electric drill
• 16.8V/1.6Ah design, torque up to
55N.m
• Body with LED lighting and power
display function
•
•
:L 0-450r/min H 0-1800r/min
Torque adjustment: 21+1 gear
• Small size, reinforced nylon case,
ergonomic soft handle, comfortable operation.
• Brushless motor, strong power
• 20V/2.0Ah design, torque up to
•
• 10mm self-tightening drill chuck, easy to operate
Two-speed design, can do electric screw batch can also do electric drill
55N.m
• Body with LED lighting and power display function
• No load speed: L 0-450r/min H 0-1800r/min
• Torque adjustment: 21+1 gear
ᄤᜉ 55 10 21+1 Low speed 0-450
High speed 0-1800
Low speed 0-450
High speed 0-1800
16.8V 2.0Ah 1
ᄤᜉ
55 10 21+1 20V 2.0Ah 1
ᄤᜉ
330 2000 3500 4.0Ah 20V 1
$BQBDJUZ
$BQBDJUZ
7PMUBHF
7PMUBHF
7PMUBHF $BQBDJUZ .BY)PME 5PSRVF
\"EKVTUNFOU
.BY)PME 5PSRVF
\"EKVTUNFOU
10000 100 20V 4.0Ah 1ᄤᜉ
1000 5000 20V 4.0Ah 1ᄤᜉ
• 12.5mm (1/2 \") square head drive
•
• Small size, reinforced nylon case,
ergonomic soft handle, comfortable
operation.
Brushless motor, strong power
• 20V/4.0Ah design, maximum torque
up to 330 N.m
• Body design second gear high and
low torque switch
• Body function key, can set the
reverse automatic stop function
• Body with LED lighting and power
display function
• No load speed: L 0-2200r/min
• Impact frequency: 0-3500r/min
• Suitable for 100mm diameter gri
nding wheel or cutting sheet, etc
• Small size, reinforced nylon case,
ergonomic soft handle, comfortabl
e operation.
• Brushless motor, strong power
• 20V/4.0Ah design
• The body is equipped with functi
on keys to achieve high, medium a
nd low speed switching
• The body comes with power disp
lay function
• No-load speed: 10000r/min
• Maximum cutting depth: 0-25mm
• Small size, reinforced nylon case,
ergonomic soft handle, comfortable
operation.
• Brushless motor, strong power
• 20V/4.0Ah design
• Suitable for square shank drill
• Self-locking body comes with power display
function
• No-load speed: 0-1000r/min
• Impact frequency: 0-5000BPM
• Drilling diameter: maximum 26mm
282
www.boohergroup.com
7PMUBHF $BQBDJUZ
7PMUBHF $BQBDJUZ %JTL%JB
NN
$VUUJOH5PPMT
www.boohergroup.com 282
,OJGF
厑繠䊨ⴉ
,OJGF
ᄤᜉ
• Durable ABS plastic body
• Sharp high carbon steel blade
• The high quality metal slot protects the blade well
• The detachable cutter head has the function of breaking the blade
•
1 blade 8 sections 18x100mm 0.5mm 12
Light utility knife blade with 8 cuts
ᄤᜉ
• Durable ABS plastic body
• Sharp high carbon steel blade
• The high quality metal slot protects the blade well
• The detachable cutter head has the function of breaking the blade
•
1 blade 13 sections 9x80mm 0.4mm 12
Light utility knife blade with 13 cuts
• Durable aluminum alloy
4 blades 8 sections 18x100mm 0.5mm 12
frame
• Fast and safe automatic blade replacement without the tools
• The blade holds 4 blades
• Comfortable soft handle and non-slip design
• Sharp high carbon steel blade
• The high quality metal slot protects the blade well
• Super heavy duty utility knife blade with 8 cuts
• Durable ABS plastic
1 blade 8 sections 18x100mm 0.5mm 12
frame
• Comfortable soft handle with non-slip design
• Sharp high carbon steel blade
• The high quality metal slot protects the blade well
• Heavy-duty utility knife blade with 8 cuts
ᄤᜉ
• ABS handle, spray treatment
6\" 240 10 6 6\" 200 6
• Aluminum alloy handle, spray treatment surface surface
,OJGF ,OJGF
.JOJ)BDLTBX .JOJ)BDLTBX
284
www.boohergroup.com
