森泰英格孔加工刀具 - 电子书在线预览、各类电子书在线制作-云展网平台

可涨模块式系列铰刀

Expandable Modular Reamer

产品范围

● 直径： 24.90-80.59mm

● 最高可达到的精度等级：IT5

● 结构设计：模块式焊接铰刀头，锥面过定位设计

● 切削部位：硬质合金、金属陶瓷、PCD

● 冷却：中心内冷、分散内冷

● 涂层

Product scope

● Diameter:24.90-80.59mm

● The accuracy: 1T5

● Structure: compensation module welding hinge head,cone surface over positioning design-

● Cutting parts: solid cermet,carbide, PCD

● Coolant supply: internal coolant , decentral coolant

● Coating

优势、产品亮点

● 焊接刀片，刃口可进行多次脱焊修理，使用成本低。

● 模块化可快速更换切削部件。

● 保证微米级的同心度和 3μm 的重复精度。

● 选配铰刀杆不同长度型号。

● 铰刀杆带法兰调整功能，补偿机床装夹跳动。

Benefits and features

● Welding insert, insert edge can undergo multiple desoldering repairs, with low usage cost.

● Reamer head can be slightly compensated for diameter Dimension.

● Modular and quick replacement of cutting components.

● Ensure micrometer level concentricity and 3 μm repetitive accuracy.

● Optional reamer rod with diferent length.

● The reamer arbor features a flange adjustment function to compensate for machine tool clamping runout.

＊ Note: Standard products can be ordered directly using the product models. Tailor made for your specific requirements.

HEA10 可胀模块式铰刀头（中心内冷）

HEA10 Expandable Modular Reamer Head(internal coolant)

适用于铸铁盲孔 For blind holes in cast iron 涂层硬质合金 Coated carbide: HMT-45K

产品型号 Model	库存 Stock	尺寸 Dimension/mm 齿数 S0				调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
产品型号 Model	库存 Stock	DC	LF IT	HFPM	No.of teeth	调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
HEA10-3000H7-HMT-45K	O	30	H7	30	14	8	ASK28903089 S8
HEA10-3200H7-HMT-45K	O	32	H7	30 14	8	ASK30903259	S8
HEA10-3400H7-HMT-45K	O	34	H7	30 14	8	ASK32603459	S8
HEA10-3500H7-HMT-45K	O	35	H7	30 14	8	ASK34603659	S8
HEA10-3600H7-HMT-45K	O	36	H7	30 14	8	ASK34603659	S8
HEA10-3700H7-HMT-45K	O	37	H7	30	16 8	ASK36603859	S8
HEA10-3900H7-HMT-45K	O	39	H7	30	16 8	ASK38604059	S8
HEA10-4200H7-HMT-45K	O	42	H7	30	24 8	ASK41604259	S8
HEA10-4400H7-HMT-45K	O	44	H7	30	24 8	ASK43604459	S8
HEA10-4700H7-HMT-45K	O	47	H7	30	24 8	ASK46604759	S6	M12x0.5-M12x0.75
HEA10-5000H7-HMT-45K	O	50	H7	30	24	8 ASK49605059	S6	M12x0.5-M12x0.75
HEA10-5200H7-HMT-45K	O	52	H7	30	24	8 ASK51605259	S6	M12x0.5-M12x0.75
HEA10-5500H7-HMT-45K	O	55	H7	30	32 8	ASK54605659	S10	M16x0.5-M16x0.75

●标准库存 ○订单生产

＊标准品订货按产品型号下单即可，非标准型号订货请联系我们。

＊ The adjusting pin and double-ended screw are included.

HEA10 可胀模块式铰刀头（中心内冷）

HEA10 Expandable Modular Reamer Head(internal coolant)

适用于铸铁盲孔 For blind holes in cast iron 涂层硬质合金 Coated carbide: CTT-45K

产品型号 Model	库存 Stock	尺寸 Dimension/mm				调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
产品型号 Model	库存 Stock	DC IT	LF	HFPM	齿数 No.of teeth	调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
HEA10-3000H7-CTT-45K	O	30	H7	30	14	8	ASK28903089 S8
HEA10-3200H7-CTT-45K	O	32	H7 30	14	8	ASK30903259	S8
HEA10-3400H7-CTT-45K	O	34	H7 30	14	8	ASK32603459	S8
HEA10-3500H7-CTT-45K	O	35	H7 30	14	8	ASK34603659	S8
HEA10-3600H7-CTT-45K	O	36	H7 30	14	8	ASK34603659	S8
HEA10-3700H7-CTT-45K	O	37	H7	30	16	8 ASK36603859	S8
HEA10-3900H7-CTT-45K	O	39	H7	30	16	8	ASK38604059 S8
HEA10-4200H7-CTT-45K	O	42	H7	30	24	8 ASK41604259	S8
HEA10-4400H7-CTT-45K	O	44	H7	30	24	8	ASK43604459 S8
HEA10-4700H7-CTT-45K	O	47	H7	30	24	8	ASK46604759 S6	M12x0.5-M12x0.75
HEA10-5000H7-CTT-45K	O	50	H7	30	24	8	ASK49605059 S6	M12x0.5-M12x0.75
HEA10-5200H7-CTT-45K	O	52	H7	30	24	8	ASK51605259 S6	M12x0.5-M12x0.75
HEA10-5500H7-CTT-45K	O	55	H7	30	32	8	ASK54605659 S10	M16x0.5-M16x0.75

＊标准品订货按产品型号下单即可，非标准型号订货请联系我们。
●标准库存 ○订单生产
＊ Note: Standard products can be ordered directly using the product models. Tailor made for your specific requirements.

＊可胀铰刀初始订货型号包含调整胀销和双头螺钉，如需返厂维修需另购胀销。

＊ The adjusting pin and double-ended screw are included.

HEA10 可胀模块式铰刀头（中心内冷）

HEA10 Expandable Modular Reamer Head(internal coolant)

适用于易切削钢、合金钢盲孔 For blind holes in free-cutting steel, alloy steel 无涂层金属陶瓷 Uncoated cermet: CTW-45P

产品型号 Model	库存 Stock	尺寸 Dimension/mm齿数				调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
产品型号 Model	库存 Stock	DC	IT LF	HFPM	No.of teeth	调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
HEA10-3000H7-CTW-45P	O	30	H7	30	14 8	ASK28903089	S8
HEA10-3200H7-CTW-45P	O	32	H7	30 14	8	ASK30903259	S8
HEA10-3400H7-CTW-45P	O	34	H7 30	14	8	ASK32603459	S8
HEA10-3500H7-CTW-45P	O	35	H7	30 14	8	ASK34603659	S8
HEA10-3600H7-CTW-45P	O	36	H7	30 14	8	ASK34603659	S8
HEA10-3700H7-CTW-45P	O	37	H7	30 16	8	ASK36603859	S8
HEA10-3900H7-CTW-45P	O	39	H7	30 16	8	ASK38604059	S8
HEA10-4200H7-CTW-45P	O	42	H7	30 24	8	ASK41604259	S8
HEA10-4400H7-CTW-45P	O	44	H7	30 24	8	ASK43604459	S8
HEA10-4700H7-CTW-45P	O	47	H7	30 24	8	ASK46604759	S6	M12x0.5-M12x0.75
HEA10-5000H7-CTW-45P	O	50	H7	30 24	8	ASK49605059	S6	M12x0.5-M12x0.75
HEA10-5200H7-CTW-45P	O	52	H7	30 24	8	ASK51605259	S6	M12x0.5-M12x0.75
HEA10-5500H7-CTW-45P	O	55	H7	30	32 8	ASK54605659	S10	M16x0.5-M16x0.75

＊标准品订货按产品型号下单即可，非标准型号订货请联系我们。
●标准库存 ○订单生产
＊ Note: Standard products can be ordered directly using the product models. Tailor made for your specific requirements.
＊可胀铰刀初始订货型号包含调整胀销和双头螺钉，如需返厂维修需另购胀销。

＊ The adjusting pin and double-ended screw are included.

HEA20 可胀模块式铰刀头（分散内冷）

HEA20 Expandable Modular Reamer Head(decentral coolant)

适用于铸铁通孔 For through holes in cast iron 涂层硬质合金 Coated carbide: HMT-45K

产品型号 Model	库存 Stock	尺寸 Dimension/mm D				调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
产品型号 Model	库存 Stock	DC IT	LF	HFPM	齿数 No.of teeth	调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
HEA20-3000H7-HMT-45K	O	30	H7 30		14	8	ASK28903089 S8
HEA20-3200H7-HMT-45K	O	32	H7 30	14	8	ASK30903259	S8
HEA20-3400H7-HMT-45K	O	34	H7 30	14	8	ASK32603459	S8
HEA20-3500H7-HMT-45K	O	35	H7 30	14	8	ASK34603659	S8
HEA20-3600H7-HMT-45K	O	36	H7 30	14	8	ASK34603659	S8
HEA20-3700H7-HMT-45K	O	37	H7	30 16		8 ASK36603859	S8
HEA20-3900H7-HMT-45K	O	39	H7	30	16	8 ASK38604059	S8
HEA20-4200H7-HMT-45K	O	42	H7	30 24		8 ASK41604259	S8
HEA20-4400H7-HMT-45K	O	44	H7	30 24		8 ASK43604459	S8
HEA20-4700H7-HMT-45K	O	47	H7	30	24	8	ASK46604759 S6	M12x0.5-M12x0.75
HEA20-5000H7-HMT-45K	O	50	H7	30	24	8	ASK49605059 S6	M12x0.5-M12x0.75
HEA20-5200H7-HMT-45K	O	52	H7	30	24	8	ASK51605259 S6	M12x0.5-M12x0.75
HEA20-5500H7-HMT-45K	O	55	H7	30	32	8	ASK54605659 S10	M16x0.5-M16x0.75

＊标准品订货按产品型号下单即可，非标准型号订货请联系我们。
●标准库存 ○订单生产

＊ Note: Standard products can be ordered directly using the product models. Tailor made for your specific requirements.

＊可胀铰刀初始订货型号包含调整胀销和双头螺钉，如需返厂维修需另购胀销。

＊ The adjusting pin and double-ended screw are included.

HEA20 可胀模块式铰刀头（分散内冷）

HEA20 Expandable Modular Reamer Head(decentral coolant)

适用于铸铁通孔 For through holes in cast iron 涂层硬质合金 Coated carbide: CTT-45K

产品型号 Model	库存 Stock	尺寸 Dimension/mm 齿数 S0				调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
产品型号 Model	库存 Stock	DC IT	LF	HFPM	No.of teeth	调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
HEA20-3000H7-CTT-45K	O	30	H7	30	14	8	ASK28903089 S8
HEA20-3200H7-CTT-45K	O	32	H7 30	14	8	ASK30903259	S8
HEA20-3400H7-CTT-45K	O	34	H7 30	14	8	ASK32603459	S8
HEA20-3500H7-CTT-45K	O	35	H7	30 14	8	ASK34603659	S8
HEA20-3600H7-CTT-45K	O	36	H7	30 14	8	ASK34603659	S8
HEA20-3700H7-CTT-45K	O	37	H7	30 16	8	ASK36603859	S8
HEA20-3900H7-CTT-45K	O	39	H7	30	16 8	ASK38604059	S8
HEA20-4200H7-CTT-45K	O	42	H7	30	24 8	ASK41604259	S8
HEA20-4400H7-CTT-45K	O	44	H7	30 24	8	ASK43604459	S8
HEA20-4700H7-CTT-45K	O	47	H7	30	24 8	ASK46604759	S6	M12x0.5-M12x0.75
HEA20-5000H7-CTT-45K	O	50	H7	30	24 8	ASK49605059	S6	M12x0.5-M12x0.75
HEA20-5200H7-CTT-45K	O	52	H7	30	24 8	ASK51605259	S6	M12x0.5-M12x0.75
HEA20-5500H7-CTT-45K	O	55	H7	30	32 8	ASK54605659	S10	M16x0.5-M16x0.75

HEA20 可胀模块式铰刀头（分散内冷）

HEA20 Expandable Modular Reamer Head(decentral coolant)

适用于铸铁通孔 For through holes in cast iron 涂层硬质合金 Coated carbide: CTW-25T

产品型号 Model	库存 Stock	尺寸 Dimension/mm				调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
产品型号 Model	库存 Stock	DC IT	LF	HFPM	齿数 No.of teeth	调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
HEA20-3000H7-CTW-25T	O	30	H7	30	14	8	ASK28903089 S8
HEA20-3200H7-CTW-25T	O	32	H7 30	14	8	ASK30903259	S8
HEA20-3400H7-CTW-25T	O	34	H7 30	14	8	ASK32603459	S8
HEA20-3500H7-CTW-25T	O	35	H7 30	14	8	ASK34603659	S8
HEA20-3600H7-CTW-25T	O	36	H7 30	14	8	ASK34603659	S8
HEA20-3700H7-CTW-25T	O	37	H7	30	16	8 ASK36603859	S8
HEA20-3900H7-CTW-25T	O	39	H7	30	16	8	ASK38604059 S8
HEA20-4200H7-CTW-25T	O	42	H7	30	24	8 ASK41604259	S8
HEA20-4400H7-CTW-25T	O	44	H7	30	24	8	ASK43604459 S8
HEA20-4700H7-CTW-25T	O	47	H7	30	24	8	ASK46604759 S6	M12x0.5-M12x0.75
HEA20-5000H7-CTW-25T	O	50	H7	30	24	8	ASK49605059 S6	M12x0.5-M12x0.75
HEA20-5200H7-CTW-25T	O	52	H7	30	24	8	ASK51605259 S6	M12x0.5-M12x0.75
HEA20-5500H7-CTW-25T	O	55	H7	30	32	8	ASK54605659 S10	M16x0.5-M16x0.75

＊标准品订货按产品型号下单即可，非标准型号订货请联系我们。
●标准库存 ○订单生产

＊ Note: Standard products can be ordered directly using the product models. Tailor made for your specific requirements.

＊可胀铰刀初始订货型号包含调整胀销和双头螺钉，如需返厂维修需另购胀销。

＊ The adjusting pin and double-ended screw are included.

HEA20 可胀模块式铰刀头（分散内冷）

HEA20 Expandable Modular Reamer Head(decentral coolant)

适用于易切削钢、合金钢台阶孔 For step holes in free-cutting steel, alloy steel 无涂层金属陶瓷 Coated carbide: CTW-45P

产品型号 Model	库存 Stock	尺寸 Dimension/mm				调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
产品型号 Model	库存 Stock	DC	IT LF	HFPM	齿数 No.of teeth	调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
HEA20-3000H7-CTW-45P	O	30	H7	30	14 8	ASK28903089	S8
HEA20-3200H7-CTW-45P	O	32	H7 30	14	8	ASK30903259	S8
HEA20-3400H7-CTW-45P	O	34	H7 30	14	8	ASK32603459	S8
HEA20-3500H7-CTW-45P	O	35	H7	30 14	8	ASK34603659	S8
HEA20-3600H7-CTW-45P	O	36	H7	30 14	8	ASK34603659	S8
HEA20-3700H7-CTW-45P	O	37	H7	30 16	8	ASK36603859	S8
HEA20-3900H7-CTW-45P	O	39	H7	30 16	8	ASK38604059	S8
HEA20-4200H7-CTW-45P	O	42	H7	30 24	8	ASK41604259	S8
HEA20-4400H7-CTW-45P	O	44	H7	30 24	8	ASK43604459	S8
HEA20-4700H7-CTW-45P	O	47	H7	30 24	8	ASK46604759	S6	M12x0.5-M12x0.75
HEA20-5000H7-CTW-45P	O	50	H7	30	24 8	ASK49605059	S6	M12x0.5-M12x0.75
HEA20-5200H7-CTW-45P	O	52	H7	30	24 8	ASK51605259	S6	M12x0.5-M12x0.75
HEA20-5500H7-CTW-45P	O	55	H7	30	32 8	ASK54605659	S10	M16x0.5-M16x0.75

●标准库存 ○订单生产

＊标准品订货按产品型号下单即可，非标准型号订货请联系我们。

＊ Note: Standard products can be ordered directly using the product models. Tailor made for your specific requirements.

＊可胀铰刀初始订货型号包含调整胀销和双头螺钉，如需返厂维修需另购胀销。

＊ The adjusting pin and double-ended screw are included.

HEC20 可胀模块式铰刀头（分散内冷）

HEC20 Expandable Modular Reamer Head(decentral coolant)

适用于钢套轴承台阶孔 For step holes for steel bushings/bearings 无涂层金属陶瓷 Uncoated cermet: CTW-45P

产品型号 Model	库存 Stock	尺寸 Dimension/mm				调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
产品型号 Model	库存 Stock	DC IT	LF	HFPM	齿数 No.of teeth	调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
HEC20-5500H6-CTW-45P-NCTR	O	55 H6	30	32	8	ASK54605659	S10	M16x0.5-M16x0.75
HEC20-6200H6-CTW-45P-NCTR	O	62 H6	30	32	8	ASK60606259	S10	M16x0.5-M16x0.75
HEC20-6800H6-CTW-45P-NCTR	O	68 H6	30	32	8	ASK60606259	S10	M16x0.5-M16x0.75
HEC20-7000H6-CTW-45P-NCTR	O	70 H6	30	42	8	ASK68607059	S12	M20x0.5-M16x0.75
HEC20-7200H6-CTW-45P-NCTR	O	72 H6	30	42	8	AS31720042	S12	M20x0.5-M16x0.75
HEC20-7500H6-CTW-45P-NCTR	O	75 H6	30	42	8	AS31750042	S12	M20x0.5-M16x0.75
HEC20-8000H6-CTW-45P-NCTR	O	80	H6 30	42	8	AS31800042	S12	M20x0.5-M16x0.75

＊标准品订货按产品型号下单即可，非标准型号订货请联系我们。
＊ Note: Standard products can be ordered directly using the product models. Tailor made for your specific requirements.
●标准库存 ○订单生产

＊可胀铰刀初始订货型号包含调整胀销和双头螺钉，如需返厂维修需另购胀销。

＊ The adjusting pin and double-ended screw are included.

＊ Note: Standard products can be ordered directly using the product models. Tailor made for your specific requirements.

HEC20 可胀模块式铰刀头（中心内冷）

HEC20 Expandable Modular Reamer Head(internal coolant)

适用于钢套轴承台阶孔 For step holes for steel bushings/bearings 无涂层金属陶瓷 Uncoated cermet: CTW-R04A60P

产品型号 Model	库存 Stock	尺寸 Dimension/mm				调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
产品型号 Model	库存 Stock	DC	IT LF	HFPM	No.of teeth	调整胀销 Adjusting Pin	螺钉扳手 Wrench	双头螺钉 Double-ended Screw
HEC20-5500H6-CTW-R04A60P-CTR	O	55	H6	30 32	8	ASK54605659	S10	M16x0.5-M16x0.75
HEC20-6200H6-CTW-R04A60P-CTR	O	62	H6 30	32	8	ASK60606259	S10	M16x0.5-M16x0.75
HEC20-6800H6-CTW-R04A60P-CTR	O	68	H6 30	32	8	ASK60606259	S10	M16x0.5-M16x0.75
HEC20-7000H6-CTW-R04A60P-CTR	O	70	H6 30	42	8	ASK68607059	S12	M20x0.5-M16x0.75
HEC20-7200H6-CTW-R04A60P-CTR	O	72	H6 30	42	8	AS31720042	S12	M20x0.5-M16x0.75
HEC20-7500H6-CTW-R04A60P-CTR	O	75	H6 30	42	8	AS31750042	S12	M20x0.5-M16x0.75
HEC20-8000H6-CTW-R04A60P-CTR	O	80	H6	30 42	8	AS31800042	S12	M20x0.5-M16x0.75

＊标准品订货按产品型号下单即可，非标准型号订货请联系我们。
●标准库存 ○订单生产

＊可胀铰刀初始订货型号包含调整胀销和双头螺钉，如需返厂维修需另购胀销。

＊ The adjusting pin and double-ended screw are included.

铰刀杆（圆柱柄）

Reamer Holder (cylindrical Holder Reamer)

产品型号 Model	库存 Stock	尺寸 Dimension/mm
产品型号 Model	库存 Stock	HFPM	DC	LF	L	DN	DCON
SD25-HFPM14-L90-27	O	14	29.9-36.59	=	90	27	25
SD32-HFPM16-L95-34	O	16	36.60-42.59	=	95	34	32
SD32-HFPM24-L95-39	O	24	42.60-52.59	■	95	39	32
SD32-HFPM32-L95-49	O	32	52.60-62.59	35	95	49	32
SD32-HFPM32-L95-57	O	32	62.60-69.59	35	95	57	32
SD32-HFPM42-L95-63	O	40	69.60-80.59	35	95	63	32

＊如需非标定制（直径范围 24.9-80.59mm）请联系我们。
＊Tailor made for your specific requirements.(diameter rangs 24.9-80.59mm).
●标准库存 ○订单生产

铰刀杆（法兰补偿） Reamer Holder (flange Compensation)

产品型号 Model	库存 Stock	尺寸 Dimension/mm
产品型号 Model	库存 Stock	HFPM	DC	LF	L	DN	MD
MD80-HFPM14-L085-27	O	14	29.90-36.59	68	85	27	M080
MD80-HFPM14-L145-27	O	14	29.90-36.59	128	145	27	M080
MD80-HFPM16-L085-34	O	16	36.60-42.59	68	85	34	M080
MD80-HFPM16-L145-34	O	16	36.60-42.59	128	145	34	M080
MD80-HFPM24-L085-39	O	24	42.60-52.59	68	85	39	M080
MD80-HFPM24-L145-39	O	24	42.60-52.59	128	145	39	M080
MD80-HFPM32-L045-49-P	O	32	52.60-62.59	28	45	49	M080
MD80-HFPM32-L085-49-P	O	32	52.60-62.59	68	85	49	M080
MD80-HFPM32-L145-49-P	O	32	52.60-62.59	128	145	9	M080
MD80-HFPM32-L185-49-P	O	32	52.60-62.59	168	185	49	M080
MD80-HFPM32-L210-49-P	O	32	52.60-62.59	193	210	49	M080
MD80-HFPM32-L045-57-P	O	32	62.60-69.59	28	45	57	M080
MD80-HFPM32-L085-57-P	O	32	62.60-69.59	68	85	57	M080
MD80-HFPM32-L145-57-P	O	32	62.60-69.59	128	145	57	M080
MD80-HFPM32-L185-57-P	O	32	62.60-69.59	168	185	57	M080
MD80-HFPM32-L210-57-P	O	32	62.60-69.59	193	210	57	M080
MD80-HFPM42-L045-63-U	O	42	69.60-80.59	28	45	63	M080
MD80-HFPM42-L085-63-U	O	42	69.60-80.59	68	85	63	M080
MD80-HFPM42-L145-63-F	O	42	69.60-80.59	128	145	63	M080
MD80-HFPM42-L185-63-U	O	42	69.60-80.59	128	185	63	M080
MD100-HFPM42-L185-63-P	O	42	69.60-80.59	168	185	63	M100
MD80-HFPM42-L210-63-U	O	42	69.60-80.59	193	210	63	M080
MD100-HFPM42-L210-63-P		42	69.60-80.59	193	210	63	M100

●标准库存 ○订单生产

可涨模块式系列铰刀Expandable Modular Reamer

安装调整：

1. 认识组件及准备：铰刀头③（含①②）、铰刀杆④ （含⑤ ）、法兰刀柄⑥（含⑦、径向调整螺钉）。

2.杠杆千分表（表头 + 表座）、无尘布、扳手。

3.清洁：用无尘布将铰刀头（外锥面、外锥面端面、测量带）、铰刀杆（内锥面、内锥面端面、测量带、法兰端面）、补偿刀柄（法兰端面、内孔）擦拭干净

4.法兰连接：铰刀杆与补偿刀柄用内六角扳手粗压紧连接螺钉。

5. 头与杆连接：将铰刀头通过②内六角圆柱头螺钉锁在铰刀杆上。铰刀头零位点与铰刀杆上的零位点对齐，顺时针锁紧过程中，保持铰刀头不转动，终拉紧时注意顺时针微量旋转铰刀头，消除铰刀头与驱动销间隙。

Installation Adjustment:

1.Preparation: Reamer head ③（including ①②），reamer adaptor ④ （inclu ding ⑤ ）,flange ⑥（including ⑦、radial adjustment screw）

2.Lever dial gauge (gauge head and holder), dust-free cloth and wrench.

3.Cleaning: Use a dust-free cloth to wipe the measuring belt, holder,and inner cavity of the reamer.

4. Holder connection: The cylindrical holder is connected to the hydraulic toolholder. 5. Install the entire set on the spindle of the machine, and use a lever micrometer to measure the belt and blade edge runout, with a run out ≤ 0.005mm.
6.The adjustment is completed, it is ready for processing.

直径补偿调整：

当刀具磨损直径失效时，用一个 L 型内六角扳手顺时针旋转铰刀头内的双头螺钉，每次建议 60°（见调整胀销 0 刻度线夹角），一般可以调整 2\~3 次，

整体调整不超过 180°，便于该铰刀头后续修理，重复使用

Compensation adjustment:

If the tool diameter wears beyond tolerance, adjust it by turning the expansion pin inside the reamer clockwise using an L-hex key, recommended 60° per turn(based on the o-scale reference). Generally, 2\~3 adjustments, and max. 180° cumulative rotation, are allowed to maintain reconditioning feasibility, enabling reuse and cost savings.

Tap Indentification System丝锥型号编制说明

D 1

PO 2

M8x1xLH

6HX 4

	1 外形标准代号Standard code
G	国标(GB) 或 ISO 标准Chinese standard(GB) orISO standard
D	德标 (DIN)Germany standard
J	日标 (JIS)Japanese standard

2 丝锥类型Tap types
	直槽 Straight flute		HT
	螺旋槽Spiral flute	> 40°	SA
		20°-40°	SB
		< 20°	SC
	螺尖 Spiral point		PO
	挤压 Forming		NR

	3 丝锥规格Tap specification
M8	型号规格Thread size
1	螺距(粗牙不标注)Thread pitch(coarse thread is notmarked)
LH	左旋(右旋不标注)Left hand(right hand is not marked)

7切削锥Chamfer form
A	6-8P
B	3.5-5.5P
C	2-3P
D	4-5P
E	1.5-2P
F	1-1.5P

	8涂层Coating
C	TiCN
H	氧化处理 Oxidation treatment
N	氮化处理 Nitrogen treatment
T	TiN
D	DLC
W	无涂层 Un-coated

Tap Indentification System丝锥型号编制说明

L150

4 螺纹孔精度 Class of thread hole
4H
6H
6HX
6G

	6GX
	7G

5非标长度 Non-standard length

L150

丝锥总长 150mm
（标准丝锥不标注）
Tap total length
150mm
(standard tap length is
not marked)

9 材料类型Tool materials

H: 高速钢 High speed steel

P: 粉末高速钢 Powder metallurgy high

speed steel

	6 冷却方式Coolant supply
Z	中心出水冷却Central coolant
S	侧边出水冷却decentral coolant
L	MQL 冷却技术 MQL(Minimal QualityLubrication) cooling technology外冷不标注 External coolant is notmarked

Y: 硬质合金 Hard alloy

丝锥 Taps

The cutting data listed in this selection can be adjusted according to work conditions ,material,coolant and machine etc.,to get the best results.

<sub>锥</sub>选<sup>型</sup>

丝锥类型Tap Type			通用系列 General Series			高性能系列 High Perfermance Series
丝锥类型Tap Type		直槽Straight flute	螺旋槽Spiral flute	螺尖Spiral flute	挤压Forming	直槽Straight flute	螺旋槽Spiral flute	螺尖Spiral flute	挤压Forming
丝锥材料	Tap Material	HSSE	HSSE	HSSE	HSSE	HSSE-PE	HSSE-PE	HSSE-PE	HSSE-PE
外型标准	Tap Dimension	GB/DIN/JIS	GB/DIN/JIS	GB/DIN/JIS	GB/DIN/JIS	GB/DIN/JIS	GB/DIN/JIS	GB/DIN/JIS	GB/DIN/JIS
切削锥	Lead Type	C/2-3E/1.5-2	C/2-3	B/3.5-5.5	C/2-3E/1.5-2	C/2-3E/1.5-2	C/2-3	B/3.5-5.5	C/2-3E/1.5-2
丝锥精度	Tap Tolerance	6HX	6H	6HX	6HX	6HX	6H	6HX	6HX
可加工孔型	Hole Type	2/3/4	1/2/3	4	1/2/3/4	2/3/4	1/2/3	4	1/2/3/4
丝锥涂层	Tap Coating	Un-coated C	Un-coated C	Un-coated C	C	C	C	C	C

P1	碳钢等 Steels, etc	≤210HB	≤600N/mm2	5-15	10-20	10-20	15-35	10-20	15-35	15-35	10-20	15-45	15-45	15-45
P2	碳钢、低合金钢等Steels,Alloysteels;	≤ 252HB	≤ 850N/mm2	5-15	10-20	10-20	15-35	10-20	15-35	15-35	10-20	15-45	15-45	15-45
P3	硬度合金钢等 Alloy steels, etc	≤ 37.5HRC	≤1200N/mm2	5-10	5-15	5-15	10-30	5-15	10-20	10-20	5-15	15-35	15-35	15-35
P4	合金钢，调质钢Alloysteel,heat-treated,etc	≤40HRC	≤ 1300N/mm2		5-15	5-15	5-15	5-15	5-15		5-15	10-20	10-20
M1	铁素体，马氏体 Femitic, Martensitic	≤252HB	≤ 850N/mm2	5-15	10-20	10-20	15-35	10-20	15-35	15-35		15-35	15-35	15-35
M2	奥氏体不锈钢等 Austenitic	≤ 252HB	≤ 850N/mm2	5-15	10-20	10-20	10-25	10-20	10-25	10-25		10-25	10-25	10-25
M3	双相不锈钢等 Femtic+Austenitic	≤ 37.5HRC	≤ 1200N/mm2									10-20	10-20
K1	灰铸铁 Grey cast iron, etc.	≤ 90HB	≤300N/mm2	10-20	10-20						15-45
K2	蠕墨铸铁等 Vermicular cast iron, etc.	≤150HB	≤ 500N/mm2	10-20	10-20						15-45
K3	球墨铸铁 Nodular graphite, etc. ≤	150HRC	≤500N/mm2	10-20	10-20	10-20	10-20	10-20	10-20		15-30	15-25	15-25
K4	可锻铸铁等 Malleable cast iron, etc	≤ 266HRC	≤ 900N/mm2	10-20	10-20	5-20	10-20	5-20	10-20		15-25	15-25	15-25
N1铝、
N1铝、	铝合金 Aluminium, Aluminium alloys	≤ 105HB	≤ 350N/mm2				15-45		15-45	15-45		15-45	15-45	15-45
N2	铸铝(低硅 )Aluminium cast alloys Si < 12%	≤ 150HB	≤ 500N/mm2				15-45		15-45	15-45		15-45	15-45	15-45
N3	铸铝（高硅 )Aluminium cast alloys Si ≥ 12%	≤ 150HB	≤ 500N/mm2	10-20	10-20	10-20	10-20	10-20	10-20		15-45	10-20	10-20
N4	纯铜低合金铜 Copper, Low-alloyed copper	≤ 120HRC	≤ 400N/mm2				15-45		15-45	15-45		15-45	15-45	15-45
N5	铜合金（长屑）Copper-alloys(long-chips)	≤ 238HB	≤ 800N/mm2				15-45		15-45	15-45		15-45	15-45	15-45
N6	铜合金（短屑）Copper-alloys(short-chips)	≤ 238HRC	≤ 800N/mm2	10-20	10-30	10-20	10-20	10-20	10-20		15-45	10-20	10-20
N7	镁、镁合金 Magnesium, Magnesium alloys	≤ 150HB	≤ 500N/mm2		15-25
N8	铸镁合金 Magnesium cast alloys	≤ 150HRC	≤ 500N/mm2		15-25
N9石墨	Graphite
N10钨铜	合金 Tungsten-copper alloys
S1	纯钛 Titanium	≤ 150HB	≤ 600N/mm2				10-20		10-20				10-25
S2S3	钛合金 Titanium alloys	≤ 266HB	≤ 900N/mm2				10-20		10-20			10-25	10-25
S2S3	钛合金 Titanium alloys	≤ 39.5HRC	≤ 1250N/mm2				10-15		10-15			10-15	10-15
S4	纯镍 Nickel	≤ 150HB	≤ 600N/mm2				5-15		5-15			5-15	5-15
S5	镍基合金 Nickel-base alloys	≤ 266HB	≤ 900N/mm2				5-10		5-10			5-10	5-10
S5	镍基合金 Nickel-base alloys	≤ 48.5HRC	≤ 1600N/mm2
S6S7	钴基合金 Cobalt-base alloys	≤ 266HB≤ 48.5HRC	≤ 1000N/mm2
S6S7	钴基合金 Cobalt-base alloys	≤ 266HB≤ 48.5HRC	≤ 1600N/mm2
S8	铁基合金 lron-base alloys	≤ 46.7HRC	≤ 5100N/mm2
H1
	高强度钢 High strength steels
	高强度钢 High strength steels	≤ 40-50HRC
H2	淬硬钢等 Hardened steels,etc.	≤ 50-55HRC

丝锥型号说明 Taps Description
HT(HSSE)	通用直槽丝锥采用高性能高速钢(HSSE)，分为涂层和无涂层两种，应用场合广泛。可以加工硬度不高的各类钢，不锈钢，有色金属等。	M(F)2-M(F)20
HT(HSSE-PE)	高性能直槽丝锥采用进口高性能粉末钢（HSSE-PM），结合TiCN 涂层，应用在加工铸铁，铸铝等短切屑材料时，表现突出；也可以用于加工硬度不高于40HRC的各类钢材，有色金属等。	M(F)2-M(F)20
SA(HSSE)	通用螺旋槽丝锥采用大螺旋角设计，排屑优良，主要用于加工硬度不高的各类钢，不锈钢，有色金属等。	M(F)2-M(F)20
	高性能螺旋槽丝锥在通用系列的基础上优化了丝锥的后角设计，进一步降低切削阻力，可用于高速加工，使用同步攻丝的效果更佳;M20-M36采用德标	M(F)2-M(F)36
SA(HSSE-PM)	外形设计，可直接用于能源行业。
PO(HSSE)	通用系列螺尖丝锥仅可用于通孔加工，可适用于大部分工况，被加工螺纹质量高。	M(F)2-M(F)20
PO(HSSE-PM)	高性能螺尖丝锥采用进口高性能粉末钢（HSSE-PM）材质，应用范围更加广泛，可用于高速加工，使用同步攻丝效果更佳。	M(F)2-M(F)20
NR(HSSE)	通用挤压丝锥采用多棱大芯厚度设计，芯部强度高，结构稳定，可用于硬度不高的各类塑性材料的加工，具有寿命高，无铁屑的优点。	P ≤ 2.0

NR(HSSE-PM)	高性能挤压丝锥在通用系列的基础上优化截形设计，降低加工阻力，结合 TiCN复合涂层，可用于高速加工，表现突出。	Ρ≤ 2.0
HT(HSSE)	General straight flute taps are made of high performance HSSE. Taps are divided into coated and uncoated , and have a wide range of applications. The taps can process all kinds of steels with low hardness, stainless steels ,nonferrous metals, etc.	M(F)2-M(F)20
HT(HSSE-PE)	High-performance straight flute taps are made of imported high performance powder steel(HSSE-PM). The taps, covered with TiCN coating, used in the processing of cast iron, cast aluminum and other short chip materials have outstanding performance; They can also be used to process all kinds of steels and nonferrous metals with hardness not higher than 40HRC, etc.	M(F)2-M(F)20
SA(HSSE)	General spiral flute taps are designed with large spiral angle, so the taps have high performance on chip discharge. They are mainly used in all kinds of steels with low hardness, stainless steels, non- ferrous metals, etc.	M(F)2-M(F)20
SA(HSSE-PM)	Based on the general series taps, the back angle design of the taps are optimized to further reduce the cutting resistance, which can be used for high-speed cutting, and the result of using synchronous tapping is better. We use DIN standard to design M20-M36 taps shape, these taps can directly use in the energy industry.	M(F)2-M(F)36
PO(HSSE)	Gneral straight flute with spiral point taps are only suitable for through-hole machining, which can be applied to most cutting conditions .the tap can process higher quality threads holes .	M(F)2-M(F)20
PO(HSSE-PM)	High-performance straight flute with spiral point taps are made of imported high performance powder steel(HSSE-PM), which can be used in a wide range of applications. It can be used for high- speed processing, and the result of using synchronous tapping is better.	M(F)2-M(F)20
NR(HSSE)	General forming taps are designed with multi-edge and large core thickness. The taps have high- performance on core strength and stable structure, which can be used for processing various plastic materials with low hardness. In addition, they have the advantages of long life and free of iron filings.	P ≤ 2.0

NR(HSSE-PM)	Based on the general series, we optimize the cross-section shape of high-performance forming taps to reduce the machining resistance. Combined with TiCN composite coating, the taps can be used for high-speed machining and have outstanding performance.	P ≤ 2.0

螺旋槽 Spiral Flute

GB/ISO 国标通用丝锥系列 C/2-3PGB/ISO Standard General HSSE Taps

型号 Model			尺寸 Dimension/mm
无涂层 Uncoated	涂层 Coated	库存 Stock	TDZ	TP	LU	CZCMS	TCTR DCONMS	TD	LF	THL
GSAM3-6HCWH		GSAM3-6HCCH		M3 0.5	19	3.15x2.5	6H	3.15	3	48	5.5
GSAM4-6HCWH		GSAM4-6HCCH		M4	0.7 21	4x3.15	6H	4	4	53	7.7
GSAM5-6HCWH		GSAM5-6HCCH		M5	0.8 24	5x4	6H	5	5	58	8.8
GSAM6-6HCWH		GSAM6-6HCCH		M6	1.0 29	6.3x5	6H	6.3	6	66	11
GSAM8-6HCWH		GSAM8-6HCCH		M8	1.25 37	6.3x5	6H	6.3	8	72	13.5
GSAM10-6HCWH		GSAM10-6HCCH		M10	1.5 41	8x6.3	6H	8	10	80	16.5
GSAM12-6HCWH		GSAM12-6HCCH		M12	1.75 48	9x7.1	6H	9	12	89	19.5
	GSAM14-6HCWH	GSAM14-6HCCH		M14	2.0	48 11.2x9	6H	11.2	14	95	22
	GSAM16-6HCWH	GSAM16-6HCCH		M16	2.0	52	12.5x10 6H	12.5	16	102	22
	GSAM18-6HCWH	GSAM18-6HCCH		M18	2.5	55	14x11.2 6H	14	18	112	27.5
	GSAM20-6HCWH	GSAM20-6HCCH		M20	2.5	58	14x11.2 6H	14	20	118	27.5
	GSAM3×0.35-6HCWH	GSAM3×0.35-6HCCH		M3x0.35	0.35	19	3.15x2.5 6H	3.15	3	48	5.5
	GSAM4×0.5-6HCWH	GSAM4×0.5-6HCCH		M4x0.5	0.5	21	4x3.15 6H	4	4	53	7.7
	GSAM5×0.5-6HCWH	GSAM5×0.5-6HCCH		M5x0.5	0.5	24	5x4 6H	5	5	58	8.8
	GSAM6×0.5-6HCWH	GSAM6×0.5-6HCCH		M6x0.5	0.5	29	6.3x5 6H	6.3	6	66	11
	GSAM6×0.75-6HCWH	GSAM6×0.75-6HCCH		M6x0.75	0.75	29	6.3x5 6H	6.3	6	66	11
	GSAM8×0.75-6HCWH	GSAM8×0.75-6HCCH		M8x0.75	0.75	37	6.3x5 6H	6.3	8	72	13.5
	GSAM8×1-6HCWH	GSAM8×1-6HCCH		M8x1	1.0	37	6.3x5 6H	6.3	8	72	13.5
	GSAM10×1-6HCWH	GSAM10×1-6HCCH		M10x1	1.0	41	8x6.3 6H	8	10	80	16.5
	GSAM10×1.25-6HCWH	GSAM10×1.25-6HCCH		M10x1.25	1.25	41	8x6.3 6H	8	10	80	16.5
	GSAM12×1-6HCWH	GSAM12×1-6HCCH		M12x1	1.0	48	9x7.1 6H	9	12	89	19.5
	GSAM12×1.25-6HCWH	GSAM12×1.25-6HCCH		M12x1.25	1.25	48	9x7.1 6H	9	12	89	19.5
	GSAM12×1.5-6HCWH	GSAM12×1.5-6HCCH		M12x1.5	1.5	48	9x7.1 6H	9	12	89	19.5
	GSAM14×1-6HCWH	GSAM14×1-6HCCH		M14x1	1.0	48	11.2x9 6H	11.2	14	95	22
	GSAM14×1.25-6HCWH	GSAM14×1.25-6HCCH		M14x1.25	1.25	48 48	11.2x9 6H	11.2	14	95	22
	GSAM14×1.5-6HCWH	GSAM14×1.5-6HCCH		M14x1.5	1.5 1.0	52	11.2x9 6H 12.5x10 6H	11.2	14	95	22
	GSAM16×1-6HCWH	GSAM16×1-6HCCH		M16x1	1.5	52	12.5x10 6H	12.5 12.5	16	102	22
	GSAM16×1.5-6HCWH	GSAM16×1.5-6HCCH		M16x1.5 M18x1	1.0	55	14x11.2 6H	14	16 18	102	22
	GSAM18×1-6HCWH	GSAM18×1-6HCCH GSAM18×1.5-6HCCH		M18x1.5	1.5	55	14x11.2 6H	14	18	112 112	27.5
	GSAM18×1.5-6HCWH GSAM18×2-6HCWH	GSAM18×2-6HCCH		M18x2	2.0	55	14x11.2 6H	14	18	112	27.5 27.5
	GSAM20×1-6HCWH	GSAM20×1-6HCCH		M20x1	1.0	58	14x11.2 6H	14	20	118	27.5
	GSAM20×1.5-6HCWH	GSAM20×1.5-6HCCH		M20x1.5	1.5	58	14x11.2 6H	14	20	118	27.5
	GSAM20×2-6HCWH	GSAM20×2-6HCCH		M20x2	2.0	58	14x11.2 6H	14	20	118	27.5

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic、Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloybase

镍基合金Nickell-alloy

塑料Plastic

(HB ≤ 252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)(> 55HRC)

无涂层 Uncoated

☆

☆☆☆★ ☆★★ ☆☆

涂层 Coated

★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。
＊ For specific material,please refer to C216 for further information.

螺尖 Spiral Point

GB/ISO 国标通用丝锥系列 B/3.5-5.5PGB/ISO Standard General HSSE Tap

型号 Model			库存 TDZ	尺寸 Dimension/mm
无涂层 Uncoated	涂层 Coated	Stock	库存 TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
GPOM3-6HXBWH		GPOM3-6HXBCH		M3 0.5	19	3.15x2.5	6HX	3.15	3	48	7.5
GPOM4-6HXBWH		GPOM4-6HXBCH		M4 0.7	21	4x3.15	6HX	4	4	53	10.5
GPOM5-6HXBWH	GPOM5-6HXBCH			M5 0.8	24	5x4	6HX	5	5	58	12
GPOM6-6HXBWH	GPOM6-6HXBCH			M6 1.0	29	6.3x5	6HX	6.3	6	66	15
GPOM8-6HXBWH		GPOM8-6HXBCH		M8 1.25	37	6.3x5	6HX	6.3	8	72	18.8
GPOM10-6HXBWH		GPOM10-6HXBCH		M10 1.5	41	8x6.3	6HX	8	10	80	22.5
GPOM12-6HXBWH		GPOM12-6HXBCH		M12 1.75	48	9x7.1	6HX	9	12	89	26.3
GPOM14-6HXBWH		GPOM14-6HXBCH		M14 2.0	48	11.2x9	6HX	11.2	14	95	30
GPOM16-6HXBWH		GPOM16-6HXBCH		M16 2.0	52	12.5x10	6HX	12.5	16	102	30
GPOM18-6HXBWH		GPOM18-6HXBCH		M18 2.5	55	14x11.2	6HX	14	18	112	37.5
	GPOM20-6HXBWH	GPOM20-6HXBCH		M20 2.5	58	14x11.2	6HX	14	20	118	37.5
	GPOM3×0.35-6HXBWH	GPOM3×0.35-6HXBCH		M3x0.35 0.35	19	3.15x2.5	6HX	3.15	3	48	7.5
	GPOM4×0.5-6HXBWH	GPOM4×0.5-6HXBCH		M4x0.5 0.5	21	4x3.15	6HX	4	4	53	10.5
	GPOM5×0.5-6HXBWH	GPOM5×0.5-6HXBCH		M5x0.5 0.5	24	5x4	6HX	5	5	58	12
	GPOM6×0.5-6HXBWH	GPOM6×0.5-6HXBCH		M6x0.5 0.5	29	6.3x5	6HX	6.3	6	66	15
	GPOM6×0.75-6HXBWH	GPOM6×0.75-6HXBCH		M6x0.75 0.75	29	6.3x5	6HX	6.3	6	66	15
	GPOM8×0.75-6HXBWH	GPOM8×0.75-6HXBCH		M8x0.75	0.75 37	6.3x5	6HX	6.3	8	72	18.8
	GPOM8×1-6HXBWH	GPOM8×1-6HXBCH		M8x1	1.0 37	6.3x5	6HX	6.3	8	72	18.8
	GPOM10×1-6HXBWH	GPOM10×1-6HXBCH		M10x1	1.0 41	8x6.3	6HX	8	10	80	22.5
	GPOM10×1.25-6HXBWH	GPOM10×1.25-6HXBCH		M10x1.25	1.25 41	8x6.3	6HX	8	10	80	22.5
	GPOM12×1-6HXBWH	GPOM12×1-6HXBCH		M12x1	1.0 48	9x7.1	6HX	9	12	89	26.3
	GPOM12×1.25-6HXBWH	GPOM12×1.25-6HXBCH		M12x1.25	1.25 48	9x7.1	6HX	9	12	89	26.3
	GPOM12×1.5-6HXBWH	GPOM12×1.5-6HXBCH		M12x1.5	1.5 48	9x7.1	6HX	9	12	89	26.3
	GPOM14×1-6HXBWH	GPOM14×1-6HXBCH		M14x1	1.0 48	11.2x9	6HX	11.2	14	95	30
	GPOM14×1.25-6HXBWH	GPOM14×1.25-6HXBCH		M14x1.25	1.25 48	11.2x9	6HX	11.2	14	95	30
	GPOM14×1.5-6HXBWH	GPOM14×1.5-6HXBCH		M14x1.5	1.5 48	11.2x9	6HX	11.2	14	95	30
	GPOM16×1-6HXBWH	GPOM16×1-6HXBCH		M16x1	1.0 52	12.5x10	6HX	12.5	16	102	30
	GPOM16×1.5-6HXBWH	GPOM16×1.5-6HXBCH		M16x1.5	1.5 52	12.5x10	6HX	12.5	16	102	30
	GPOM18×1-6HXBWH	GPOM18×1-6HXBCH		M18x1	1.0 55	14x11.2	6HX	14	18	112	37.5
	GPOM18×1.5-6HXBWH	GPOM18×1.5-6HXBCH	O	M18x1.5	1.5 55	14x11.2	6HX	14	18	112	37.5
	GPOM18×2-6HXBWH	GPOM18×2-6HXBCH	O	M18x2	2.0 55	14x11.2	6HX	14	18	112	37.5
GPOM20×1-6HXBWH		GPOM20×1-6HXBCH	O	M20x1	1.0 58	14x11.2 14x11.2	6HX	14	20	118	37.5
GPOM20×1.5-6HXBWH		GPOM20×1.5-6HXBCH GPOM20×2-6HXBCH	O	M20x1.5	1.5 58 2.0 58	14x11.2	6HX 6HX	14 14	20 20	118 118	37.5 37.5
GPOM20×2-6HXBWH				M20x2

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

无涂层 Uncoated

☆

涂层 Coated

★

☆

★

☆

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

直槽 Straight Flute

GB/ISO 国标通用丝锥系列 C/2-3PGB/ISO Standard General HSSE Tap

型号 Model				尺寸 Dimension/mm
无涂层 Uncoated		涂层 Coated	库存 Stock TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
GHTM3-6HXCWH		GHTM3-6HXCCH		M3	0.5	19	3.15x2.5 6HX	3.15	3	48	7.5
GHTM4-6HXCWH		GHTM4-6HXCCH		M4	0.7	21	4x3.15 6HX	4	4	53	10.5
GHTM5-6HXCWH		GHTM5-6HXCCH		M5	0.8	24 5x4	6HX	5	5	58	12
GHTM6-6HXCWH		GHTM6-6HXCCH		M6	1.0	29 6.3x5	6HX	6.3	6	66	15
GHTM8-6HXCWH		GHTM8-6HXCCH		M8	1.25	37	6.3x5 6HX	6.3	8	72	18.8
GHTM10-6HXCWH		GHTM10-6HXCCH		M10	1.5	41 8x6.3	6HX	8	10	80	22.5
GHTM12-6HXCWH		GHTM12-6HXCCH		M12	1.75	48 9x7.1	6HX	9	12	89	26.3
GHTM14-6HXCWH		GHTM14-6HXCCH		M14	2.0	48	11.2x9 6HX	11.2	14	95	30
GHTM16-6HXCWH		GHTM16-6HXCCH		M16	2.0	52	12.5x10 6HX	12.5	16	102	30
	GHTM18-6HXCWH	GHTM18-6HXCCH		M18	2.5	55	14x11.2 6HX	14	18	112	37.5
	GHTM20-6HXCWH	GHTM20-6HXCCH		M20	2.5	58	14x11.2 6HX	14	20	118	37.5
	GHTM3×0.35-6HXCWH	GHTM3×0.35-6HXCCH		M3x0.35	0.35	19	3.15x2.5 6HX	3.15	3	48	7.5
	GHTM4×0.5-6HXCWH	GHTM4×0.5-6HXCCH		M4x0.5	0.5	21	4x3.15 6HX	4	4	53	10.5
	GHTM5×0.5-6HXCWH	GHTM5×0.5-6HXCCH		M5x0.5	0.5	24	5x4 6HX	5	5	58	12
	GHTM6×0.5-6HXCWH	GHTM6×0.5-6HXCCH		M6x0.5	0.5	29	6.3x5 6HX	6.3	6	66	15
	GHTM6×0.75-6HXCWH	GHTM6×0.75-6HXCCH		M6x0.75	0.75	29	6.3x5 6HX	6.3	6	66	15
	GHTM8×0.75-6HXCWH	GHTM8×0.75-6HXCCH		M8x0.75	0.75	37	6.3x5 6HX	6.3	8	72	18.8
	GHTM8×1-6HXCWH	GHTM8×1-6HXCCH		M8x1	1.0	37	6.3x5 6HX	6.3	8	72	18.8
	GHTM10×1-6HXCWH	GHTM10×1-6HXCCH		M10x1	1.0	41	8x6.3 6HX	8	10	80	22.5
	GHTM10×1.25-6HXCWH	GHTM10×1.25-6HXCCH		M10x1.25	1.25	41	8x6.3 6HX	8	10	80	22.5
	GHTM12×1-6HXCWH	GHTM12×1-6HXCCH		M12x1	1.0	48	9x7.1 6HX	9	12	89	26.3
	GHTM12×1.25-6HXCWH	GHTM12×1.25-6HXCCH		M12x1.25	1.25	48	9x7.1 6HX 9x7.1 6HX	9	12	89	26.3
	GHTM12×1.5-6HXCWH	GHTM12×1.5-6HXCCH GHTM14×1-6HXCCH		M12x1.5 M14x1	1.5 1.0	48	11.2x9 6HX	9 11.2	12	89	26.3
	GHTM14×1-6HXCWH	GHTM14×1.25-6HXCCH		M14x1.25	1.25	48 48	11.2x9 6HX	11.2	14 14	95	30
	GHTM14×1.25-6HXCWH	GHTM14×1.5-6HXCCH		M14x1.5	1.5	48	11.2x9 6HX	11.2	14	95	30
	GHTM14×1.5-6HXCWH	GHTM16×1-6HXCCH		M16x1	1.0	52	12.5x10 6HX	12.5	16	95	30
	GHTM16×1-6HXCWH GHTM16×1.5-6HXCWH	GHTM16×1.5-6HXCCH		M16x1.5	1.5	52	12.5x10 6HX	12.5	16	102	30
	GHTM18×1-6HXCWH	GHTM18×1-6HXCCH		M18x1	1.0	55	14x11.2 6HX	14	18	102 112	30
	GHTM18×1.5-6HXCWH	GHTM18×1.5-6HXCCH		M18x1.5	1.5	55	14x11.2 6HX	14	18	112	37.5
		GHTM18×2-6HXCCH		M18x2	2.0	55	14x11.2 6HX	14	18	112	37.5
	GHTM18×2-6HXCWH	GHTM20×1-6HXCCH		M20x1	1.0	58	14x11.2 6HX	14	20	118	37.5
	GHTM20×1-6HXCWH	GHTM20×1.5-6HXCCH		M20x1.5	1.5	58	14x11.2 6HX	14	20	118	37.5
	GHTM20×1.5-6HXCWH	GHTM20×2-6HXCCH		M20x2	2.0	58	14x11.2 6HX	14	20	118	37.5 37.5
	GHTM20×2-6HXCWH

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

无涂层 Uncoated

☆

涂层 Coated

★

☆

直槽 Straight FluteGB/ISO 国标通用丝锥系列 E/1.5-2PGB/ISO Standard General HSSE Tap

型号 Model			库存	尺寸 Dimension/mm
无涂层 Uncoated	涂层 Coated	Stock TDZ	库存	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
GHTM3-6HXEWH		GHTM3-6HXECH		M3	0.5	19 3.15x2.5	6HX	3.15	3	48	7.5
GHTM4-6HXEWH	GHTM4-6HXECH			M4	0.7 21	4x3.15	6HX	4	4	53	10.5
GHTM5-6HXEWH	GHTM5-6HXECH			M5	0.8 24	5x4	6HX	5	5	58	12
GHTM6-6HXEWH	GHTM6-6HXECH			M6 1.0	29	6.3x5	6HX	6.3	6	66	15
GHTM8-6HXEWH	GHTM8-6HXECH			M8 1.25	37	6.3x5	6HX	6.3	8	72	18.8
GHTM10-6HXEWH	GHTM10-6HXECH			M10 1.5	41	8x6.3	6HX	8	10	80	22.5
GHTM12-6HXEWH	GHTM12-6HXECH			M12 1.75	48	9x7.1	6HX	9	12	89	26.3
GHTM14-6HXEWH	GHTM14-6HXECH			M14 2.0	48	11.2x9	6HX	11.2	14	95	30
GHTM16-6HXEWH	GHTM16-6HXECH			M16 2.0	52	12.5x10	6HX	12.5	16	102	30
GHTM18-6HXEWH	GHTM18-6HXECH			M18 2.5	55	14x11.2	6HX	14	18	112	37.5
GHTM20-6HXEWH	GHTM20-6HXECH			M20 2.5	58	14x11.2	6HX	14	20	118	37.5
GHTM3×0.35-6HXEWH	GHTM3×0.35-6HXECH			M3x0.35 0.35	19	3.15x2.5	6HX	3.15	3	48	7.5
GHTM4×0.5-6HXEWH	GHTM4×0.5-6HXECH			M4x0.5 0.5	21	4x3.15	6HX	4	4	53	10.5
GHTM5×0.5-6HXEWH	GHTM5×0.5-6HXECH			M5x0.5 0.5	24	5x4	6HX	5	5	58	12
GHTM6×0.5-6HXEWH	GHTM6×0.5-6HXECH			M6x0.5 0.5	29	6.3x5	6HX	6.3	6	66	15
GHTM6×0.75-6HXEWH	GHTM6×0.75-6HXECH			M6x0.75 0.75	29	6.3x5	6HX	6.3	6	66	15
GHTM8×0.75-6HXEWH	GHTM8×0.75-6HXECH			M8x0.75 0.75	37	6.3x5 6.3x5	6HX	6.3	8	72	18.8
GHTM8×1-6HXEWH	GHTM8×1-6HXECH			M8x1 1.0	37	8x6.3	6HX	6.3	8	72	18.8
GHTM10×1-6HXEWH	GHTM10×1-6HXECH			M10x1 1.0	41 41	8x6.3	6HX 6HX	8 8	10	80	22.5
GHTM10×1.25-6HXEWH	GHTM10×1.25-6HXECH GHTM12×1-6HXECH		M10x1.25	1.25 M12x1 1.0	48	9x7.1	6HX	9	10	80	22.5
GHTM12×1-6HXEWH	GHTM12×1.25-6HXECH			M12x1.25 1.25	48	9x7.1	6HX	9	12 12	89	26.3
GHTM12×1.25-6HXEWH	GHTM12×1.5-6HXECH			M12x1.5 1.5	48	9x7.1	6HX	9	12	89	26.3
GHTM12×1.5-6HXEWH	GHTM14×1-6HXECH			M14x1 1.0	48	11.2x9	6HX	11.2	14	89	26.3
GHTM14×1-6HXEWH	GHTM14×1.25-6HXECH			M14x1.25 1.25	48	11.2x9	6HX	11.2	14	95 95	30
GHTM14×1.25-6HXEWH	GHTM14×1.5-6HXECH			M14x1.5 1.5	48	11.2x9	6HX	11.2	14	95	30
GHTM14×1.5-6HXEWH GHTM16×1-6HXEWH	GHTM16×1-6HXECH			M16x1 1.0	52	12.5x10	6HX	12.5	16	102	30
GHTM16×1.5-6HXEWH	GHTM16×1.5-6HXECH			M16x1.5 1.5	52	12.5x10	6HX	12.5	16	102	30
	GHTM18×1-6HXECH			M18x1 1.0	55	14x11.2	6HX	14	18	112	30
GHTM18×1-6HXEWH	GHTM18×1.5-6HXECH			M18x1.5 1.5	55	14x11.2	6HX	14	18	112	37.5
GHTM18×1.5-6HXEWH	GHTM18×2-6HXECH			M18x2 2.0	55	14x11.2	6HX	14	18	112	37.5
GHTM18×2-6HXEWH	GHTM20×1-6HXECH			M20x1 1.0	58	14x11.2	6HX	14	20	118	37.5
GHTM20×1-6HXEWH	GHTM20×1.5-6HXECH			M20x1.5 1.5	58	14x11.2	6HX	14	20	118	37.5
GHTM20×1.5-6HXEWH				M20x2 2.0	58	14x11.2	6HX	14	20	118	37.5 37.5
GHTM20×2-6HXEWH	GHTM20×2-6HXECH

●标准库存 ○订单生产

切削材料推荐
Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

无涂层 Uncoated

☆ ☆

☆

☆☆☆

涂层 Coated

★ ★

☆

☆ ☆☆

螺旋槽 Spiral Flute

GB/ISO 国标高性能丝锥系列 C/2-3PGB/ISO Standard High-Performance HSSE-PM Tap

型号 Model 涂层 Coated	库存 Stock	TDZ	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
GSAM3-6HCCP			M3 0.5	19	3.15x2.5	6H	3.15	3	48	5.5
GSAM4-6HCCP			M4	0.7 21	4x3.15	6H	4	4	53	7.7
GSAM5-6HCCP			M5	0.8 24	5x4	6H	5	5	58	8.8
GSAM6-6HCCP			M6	1.0 29	6.3x5	6H	6.3	6	66	11
	GSAM8-6HCCP		M8	1.25 37	6.3x5	6H	6.3	8	72	13.5
	GSAM10-6HCCP		M10	1.5	41 8x6.3	6H	8	10	80	16.5
	GSAM12-6HCCP		M12	1.75	48 9x7.1	6H	9	12	89	19.5
	GSAM14-6HCCP		M14	2.0	48 11.2x9	6H	11.2	14	95	22
	GSAM16-6HCCP		M16	2.0	52 12.5x10	6H	12.5	16	102	22
	GSAM18-6HCCP		M18	2.5	55 14x11.2	6H	14	18	112	27.5
	GSAM20-6HCCP		M20	2.5	58 14x11.2	6H	14	20	118
	GSAM3×0.35-6HCCP		M3x0.35	0.35	19 3.15x2.5	6H	3.15	3	48	27.5
	GSAM4×0.5-6HCCP		M4x0.5	0.5	21 4x3.15	6H	4	4	53	5.5 7.7
	GSAM5×0.5-6HCCP		M5x0.5	0.5	24 5x4	6H	5	5	58	8.8
	GSAM6×0.5-6HCCP		M6x0.5	0.5	29 6.3x5	6H	6.3	6	66	11
	GSAM6×0.75-6HCCP		M6x0.75	0.75	29 6.3x5	6H	6.3	6	66	11
	GSAM8×0.75-6HCCP		M8x0.75	0.75	37 6.3x5	6H	6.3	8	72	13.5
	GSAM8×1-6HCCP		M8x1	1.0	37 6.3x5	6H	6.3	8	72	13.5
	GSAM10×1-6HCCP		M10x1	1.0	41 8x6.3	6H	8	10	80	16.5
	GSAM10×1.25-6HCCP		M10x1.25	1.25	41 8x6.3	6H	8	10	80	16.5
	GSAM12×1-6HCCP		M12x1	1.0	48 9x7.1	6H	9	12	89	19.5
	GSAM12×1.25-6HCCP		M12x1.25	1.25	48	9x7.1 6H	9	12	89	19.5
	GSAM12×1.5-6HCCP		M12x1.5	1.5	48	9x7.1 6H	9	12	89	19.5
	GSAM14×1-6HCCP		M14x1	1.0	48	11.2x9 6H	11.2	14	95	22
	GSAM14×1.25-6HCCP		M14x1.25	1.25	48	11.2x9 6H	11.2	14	95	22
	GSAM14×1.5-6HCCP		M14x1.5	1.5	48	11.2x9 6H	11.2	14	95	22
	GSAM16×1-6HCCP		M16x1	1.0	52	12.5x10 6H	12.5	16	102	22
	GSAM16×1.5-6HCCP		M16x1.5	1.5	52	12.5x10 6H	12.5	16	102	22
	GSAM18×1-6HCCP		M18x1	1.0	55	14x11.2 6H	14	18	112	27.5
	GSAM18×1.5-6HCCP		M18x1.5	1.5	55	14x11.2 6H	14	18	112	27.5
	GSAM18×2-6HCCP		M18x2	2.0	55	14x11.2 6H	14	18	112	27.5
	GSAM20×1-6HCCP		M20x1	1.0	58	14x11.2 6H	14	20	118	27.5
	GSAM20×1.5-6HCCP		M20x1.5	1.5	58	14x11.2 6H	14	20	118	27.5
	GSAM20×2-6HCCP		M20x2	2.0	58	14x11.2 6H	14	20	118	27.5

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloybase

镍基合金Nickell-alloy

塑料Plastic

(HB≤252)

(HRC≤40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

涂层 Coated

★

☆

★

☆

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

螺尖 Spiral Point

GB/ISO 国标高性能丝锥系列 B/3.5-5.5PGB/ISO Standard High-Performance HSSE-PM Tap

B TP 3.5-5.5P

型号 Model 涂层 Coated		库存 Stock	尺寸 Dimension/mm
型号 Model 涂层 Coated		库存 Stock	TDZ	TP	LU	CZCMS	TCTR DCONMS	TD	LF	THL
GPOM3-6HXBCP			M3	0.5	19	3.15x2.5 6HX	3.15	3	48	7.5
GPOM4-6HXBCP			M4	0.7	21	4x3.15 6HX	4	4	53	10.5
	GPOM5-6HXBCP		M5	0.8	24	5x4 6HX	5	5	58	12
	GPOM6-6HXBCP		M6	1.0	29	6.3x5 6HX	6.3	6	66	15
	GPOM8-6HXBCP		M8	1.25	37	6.3x5 6HX	6.3	8	72	18.8
	GPOM10-6HXBCP		M10	1.5	41	8x6.3 6HX	8	10	80	22.5
	GPOM12-6HXBCP		M12	1.75	48	9x7.1 6HX	9	12	89	26.3
	GPOM14-6HXBCP		M14	2.0	48	11.2x9 6HX	11.2	14	95	30
	GPOM16-6HXBCP		M16	2.0	52	12.5x10 6HX	12.5	16	102	30
	GPOM18-6HXBCP		M18	2.5	55	14x11.2 6HX	14	18	112
	GPOM20-6HXBCP		M20	2.5	58	14x11.2 6HX	14	20	118	37.5
	GPOM3×0.35-6HXBCP		M3x0.35	0.35	19	3.15x2.5 6HX	3.15	3	48	37.5
	GPOM4×0.5-6HXBCP		M4x0.5	0.5	21	4x3.15 6HX	4	4	53	7.5
	GPOM5×0.5-6HXBCP		M5x0.5	0.5	24	5x4 6HX	5	5	58	10.5
	GPOM6×0.5-6HXBCP		M6x0.5	0.5	29	6.3x5 6HX	6.3	6	66	12 15
	GPOM6×0.75-6HXBCP		M6x0.75	0.75	29	6.3x5 6HX	6.3	6	66	15
	GPOM8×0.75-6HXBCP		M8x0.75	0.75	37	6.3x5 6HX	6.3	8	72	18.8
	GPOM8×1-6HXBCP		M8x1	1.0	37	6.3x5 6HX	6.3	8	72	18.8
	GPOM10×1-6HXBCP		M10x1	1.0	41	8x6.3 6HX	8	10	80	22.5
	GPOM10×1.25-6HXBCP		M10x1.25	1.25	41	8x6.3 6HX	8	10	80	22.5
	GPOM12×1-6HXBCP		M12x1	1.0	48	9x7.1 6HX	9	12	89	26.3
	GPOM12×1.25-6HXBCP		M12x1.25	1.25	48	9x7.1 6HX	9	12	89	26.3
	GPOM12×1.5-6HXBCP		M12x1.5	1.5	48	9x7.1 6HX	9	12	89	26.3
	GPOM14×1-6HXBCP		M14x1	1.0	48	11.2x9 6HX	11.2	14	95	30
	GPOM14×1.25-6HXBCP		M14x1.25	1.25	48	11.2x9 6HX	11.2	14	95	30
	GPOM14×1.5-6HXBCP		M14x1.5	1.5	48	11.2x9 6HX	11.2	14	95	30
	GPOM16×1-6HXBCP		M16x1	1.0	52	12.5x10 6HX	12.5	16	102	30
	GPOM16×1.5-6HXBCP		M16x1.5	1.5	52	12.5x10 6HX	12.5	16	102	30
	GPOM18×1-6HXBCP		M18x1	1.0	55	14x11.2 6HX	14	18	112	37.5
	GPOM18×1.5-6HXBCP		M18x1.5	1.5	55	14x11.2 6HX	14	18	112	37.5
	GPOM18×2-6HXBCP		M18x2	2.0	55	14x11.2 6HX	14	18	112	37.5
	GPOM20×1-6HXBCP		M20x1	1.0	58	14x11.2 6HX	14	20	118	37.5
	GPOM20×1.5-6HXBCP		M20x1.5	1.5	58	14x11.2 6HX	14	20	118	37.5
	GPOM20×2-6HXBCP		M20x2	2.0	58	14x11.2 6HX	14	20	118	37.5

●标准库存 ○订单生产

切削材料推荐
Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC≤40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

涂层 Coated

★ ★ ★ ☆★★ ★☆

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

直槽 Straight Flute

GB/ISO 国标高性能丝锥系列 C/2-3PGB/ISO Standard High-Performance HSSE-PM Tap

型号 Model 涂层 Coated	库存 Stock	TDZ	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Stock	TDZ	TP		LU CZCMS	TCTR	DCONMS	TD	LF	THL
GHTM3-6HXCCP			M3 0.5	19	3.15x2.5	6HX	3.15	3	48	7.5
GHTM4-6HXCCP			M4	0.7	21 4x3.15	6HX	4	4	53	10.5
GHTM5-6HXCCP			M5	0.8	24 5x4	6HX	5	5	58	12
GHTM6-6HXCCP			M6	1.0	29 6.3x5	6HX	6.3	6	66	15
	GHTM8-6HXCCP		M8	1.25	37	6.3x5 6HX	6.3	8	72	18.8
	GHTM10-6HXCCP		M10	1.5	41	8x6.3 6HX	8	10	80	22.5
	GHTM12-6HXCCP		M12	1.75	48	9x7.1 6HX	9	12	89	26.3
	GHTM14-6HXCCP		M14	2.0	48	11.2x9 6HX	11.2	14	95	30
	GHTM16-6HXCCP		M16	2.0	52	12.5x10 6HX	12.5	16	102	30
	GHTM18-6HXCCP		M18	2.5	55	14x11.2 6HX	14	18	112	37.5
	GHTM20-6HXCCP		M20	2.5	58	14x11.2 6HX	14	20	118	37.5
	GHTM3×0.35-6HXCCP		M3x0.35	0.35	19	3.15x2.5 6HX	3.15	3	48	7.5
	GHTM4×0.5-6HXCCP		M4x0.5	0.5	21	4x3.15 6HX	4	4	53	10.5
	GHTM5×0.5-6HXCCP		M5x0.5	0.5	24	5x4 6HX	5	5	58	12
	GHTM6×0.5-6HXCCP		M6x0.5	0.5	29	6.3x5 6HX	6.3	6	66	15
	GHTM6×0.75-6HXCCP		M6x0.75	0.75	29	6.3x5 6HX	6.3	6	66	15
	GHTM8×0.75-6HXCCP		M8x0.75	0.75	37	6.3x5 6HX	6.3	8	72	18.8
	GHTM8×1-6HXCCP		M8x1	1.0	37	6.3x5 6HX	6.3	8	72	18.8
	GHTM10×1-6HXCCP		M10x1	1.0	41	8x6.3 6HX	8	10	80	22.5
	GHTM10×1.25-6HXCCP		M10x1.25	1.25	41	8x6.3 6HX	8	10	80	22.5
	GHTM12×1-6HXCCP		M12x1	1.0	48	9x7.1 6HX	9	12	89	26.3
	GHTM12×1.25-6HXCCP		M12x1.25	1.25	48	9x7.1 6HX	9	12	89	26.3
	GHTM12×1.5-6HXCCP		M12x1.5	1.5	48	9x7.1 6HX	9	12	89	26.3
	GHTM14×1-6HXCCP		M14x1	1.0	48	11.2x9 6HX	11.2	14	95	30
	GHTM14×1.25-6HXCCP		M14x1.25	1.25	48	11.2x9 6HX	11.2	14	95	30
	GHTM14×1.5-6HXCCP		M14x1.5	1.5	48	11.2x9 6HX	11.2	14	95	30
	GHTM16×1-6HXCCP		M16x1	1.0	52	12.5x10 6HX	12.5	16	102	30
	GHTM16×1.5-6HXCCP		M16x1.5	1.5	52	12.5x10 6HX	12.5	16	102	30
	GHTM18×1-6HXCCP		M18x1	1.0	55	14x11.2 6HX	14	18	112	37.5
	GHTM18×1.5-6HXCCP		M18x1.5	1.5	55	14x11.2 6HX	14	18	112	37.5
	GHTM18×2-6HXCCP		M18x2	2.0	55	14x11.2 6HX	14	18	112	37.5
	GHTM20×1-6HXCCP		M20x1	1.0	58	14x11.2 6HX	14	20	118	37.5
	GHTM20×1.5-6HXCCP		M20x1.5	1.5	58	14x11.2 6HX	14	20	118	37.5
	GHTM20×2-6HXCCP		M20x2	2.0	58	14x11.2 6HX	14	20	118	37.5

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic、Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloybase

镍基合金Nickell-alloy

塑料Plastic

(HB≤252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)( &

gt; 55HRC)

涂层 Coated

★ ★ ★★★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

直槽 Straight Flute

GB/ISO 国标高性能丝锥系列 E/1.5-2PGB/ISO Standard High-Performance HSSE-PM Tap

型号 Model 涂层 Coated	库存 Stock	螺距 TP		尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Stock	螺距 TP		TDZ TP	LU		CZCMS	TCTR DCONMS	TD	LF	THL
GHTM3-6HXECP		0.5		M3 0.5	19	3.15x2.5	6HX	3.15	3	48	7.5
GHTM4-6HXECP			0.7	M4	0.7	21 4x3.15	6HX	4	4	53	10.5
GHTM5-6HXECP			0.8	M5	0.8 24	5x4	6HX	5	5	58	12
GHTM6-6HXECP			1.0	M6	1.0	29 6.3x5	6HX	6.3	6	66	15
	GHTM8-6HXECP		1.25	M8	1.25	37 6.3x5	6HX	6.3	8	72	18.8
	GHTM10-6HXECP		1.5	M10	1.5	41 8x6.3	6HX	8	10	80	22.5
	GHTM12-6HXECP		1.75	M12	1.75	48 9x7.1	6HX	9	12	89	26.3
	GHTM14-6HXECP		2.0	M14	2.0	48 11.2x9	6HX	11.2	14	95	30
	GHTM16-6HXECP		2.0	M16	2.0	52 12.5x10	6HX	12.5	16	102	30
	GHTM18-6HXECP		2.5	M18	2.5	55 14x11.2	6HX	14	18	112	37.5
	GHTM20-6HXECP		2.5	M20	2.5	58 14x11.2	6HX	14	20	118	37.5
	GHTM3×0.35-6HXECP		0.35	M3x0.35	0.35	19 3.15x2.5	6HX	3.15	3	48	7.5
	GHTM4×0.5-6HXECP		0.5	M4x0.5	0.5	21 4x3.15	6HX	4	4	53	10.5
	GHTM5×0.5-6HXECP		0.5	M5x0.5	0.5	24	5x4 6HX	5	5	58	12
	GHTM6×0.5-6HXECP		0.5	M6x0.5	0.5	29	6.3x5 6HX	6.3	6	66	15
	GHTM6×0.75-6HXECP		0.75	M6x0.75	0.75	29	6.3x5 6HX	6.3	6	66	15
	GHTM8×0.75-6HXECP		0.75	M8x0.75	0.75	37	6.3x5 6HX	6.3	8	72	18.8
	GHTM8×1-6HXECP		1.0	M8x1	1.0	37	6.3x5 6HX	6.3	8	72	18.8
	GHTM10×1-6HXECP		1.0	M10x1	1.0	41	8x6.3 6HX	8	10	80	22.5
	GHTM10×1.25-6HXECP		1.25	M10x1.25	1.25	41	8x6.3 6HX	8	10	80	22.5
	GHTM12×1-6HXECP		1.0	M12x1	1.0	48	9x7.1 6HX	9	12	89	26.3
	GHTM12×1.25-6HXECP		1.25	M12x1.25	1.25	48	9x7.1 6HX	9	12	89	26.3
	GHTM12×1.5-6HXECP		1.5	M12x1.5	1.5	48	9x7.1 6HX	9	12	89	26.3
	GHTM14×1-6HXECP		1.0	M14x1	1.0	48	11.2x9 6HX	11.2	14	95	30
	GHTM14×1.25-6HXECP		1.25	M14x1.25	1.25	48	11.2x9 6HX	11.2	14	95	30
	GHTM14×1.5-6HXECP		1.5	M14x1.5	1.5	48	11.2x9 6HX	11.2	14	95	30
	GHTM16×1-6HXECP		1.0	M16x1	1.0	52	12.5x10 6HX	12.5	16	102	30
	GHTM16×1.5-6HXECP		1.5	M16x1.5	1.5	52	12.5x10 6HX	12.5	16	102	30
	GHTM18×1-6HXECP		1.0	M18x1	1.0	55	14x11.2 6HX	14	18	112	37.5
	GHTM18×1.5-6HXECP		1.5	M18x1.5	1.5	55	14x11.2 6HX	14	18	112	37.5
	GHTM18×2-6HXECP		2.0	M18x2	2.0	55	14x11.2 6HX	14	18	112	37.5
	GHTM20×1-6HXECP		1.0	M20x1	1.0	58	14x11.2 6HX	14	20	118	37.5
	GHTM20×1.5-6HXECP		1.5	M20x1.5	1.5 2.0	58 58	14x11.2 14x11.2 6HX	6HX 14 14	20	118	37.5
	GHTM20×2-6HXECP		2.0	M20x2

●标准库存 ○订单生产

切削材料推荐
Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

锲金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC≤40)

(40-50HRC)

(50-55HRC)( > 55HRC)

涂层 Coated

★ ★ ★★ ★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

挤压 Forming

GB/ISO 国标通用挤压丝锥系列 C/2-3PGB/ISO Standard General HSSE Forming Tap

型号 Model 涂层 Coated	库存 Stock	TDZ	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
GNRM3-6HXCCH			M3	0.5	19 3.15x2.5	6HX	3.15	3	48	5.5
	GNRM4-6HXCCH		M4	0.7	21 4x3.15	6HX	4	4	53	7.7
	GNRM5-6HXCCH		M5	0.8	24 5x4	6HX	5	5	58	8.8
	GNRM6-6HXCCH		M6	1.0	29	6.3x5 6HX	6.3	6	66	11
	GNRM8-6HXCCH		M8	1.25	37	6.3x5 6HX	6.3	8	72	13.5
	GNRM10-6HXCCH		M10	1.5	41	8x6.3 6HX	8	10	80	16.5
	GNRM12-6HXCCH		M12	1.75	48	9x7.1 6HX	9	12	89	19.5
	GNRM14-6HXCCH		M14	2.0	48	11.2x9 6HX	11.2	14	95	22
	GNRM16-6HXCCH		M16	2.0	52	12.5x10 6HX	12.5	16	102	22
	GNRM18-6HXCCH		M18	2.5	55	14x11.2 6HX	14	18	112	27.5
	GNRM20-6HXCCH		M20	2.5	58	14x11.2 6HX	14	20	118	27.5
	GNRM3×0.35-6HXCCH		M3x0.35	0.35	19	3.15x2.5 6HX	3.15	3	48	5.5
	GNRM4×0.5-6HXCCH		M4x0.5	0.5	21	4x3.15 6HX	4	4	53	7.7
	GNRM5×0.5-6HXCCH		M5x0.5	0.5	24	5x4 6HX	5	5	58	8.8
	GNRM6×0.5-6HXCCH		M6x0.5	0.5	29	6.3x5 6HX	6.3	6	66	11
	GNRM6×0.75-6HXCCH		M6x0.75	0.75	29	6.3x5 6HX	6.3	6	66	11
	GNRM8×0.75-6HXCCH		M8x0.75	0.75	37	6.3x5 6HX	6.3	8	72	13.5
	GNRM8×1-6HXCCH		M8x1	1.0	37	6.3x5 6HX	6.3	8	72	13.5
	GNRM10×1-6HXCCH		M10x1	1.0	41	8x6.3 6HX	8	10	80	16.5
	GNRM10×1.25-6HXCCH		M10x1.25	1.25	41	8x6.3 6HX	8	10	80	16.5
	GNRM12×1-6HXCCH		M12x1	1.0	48	9x7.1 6HX	9	12	89	19.5
	GNRM12×1.25-6HXCCH		M12x1.25	1.25	48	9x7.1 6HX	9	12	89	19.5
	GNRM12×1.5-6HXCCH		M12x1.5	1.5	48	9x7.1 6HX	9	12	89	19.5
	GNRM14×1-6HXCCH		M14x1	1.0	48	11.2x9 6HX	11.2	14	95	22
	GNRM14×1.25-6HXCCH		M14x1.25	1.25	48	11.2x9 6HX	11.2	14	95	22
	GNRM14×1.5-6HXCCH		M14x1.5	1.5	48	11.2x9 6HX	11.2	14	95	22
	GNRM16×1-6HXCCH		M16x1	1.0	52	12.5x10 6HX	12.5	16	102	22
	GNRM16×1.5-6HXCCH		M16x1.5	1.5	52	12.5x10 6HX	12.5	16	102	22
	GNRM18×1-6HXCCH		M18x1	1.0	55	14x11.2 6HX	14	18	112	27.5
	GNRM18×1.5-6HXCCH		M18x1.5	1.5	55	14x11.2 6HX	14	18	112	27.5
	GNRM18×2-6HXCCH		M18x2	2.0	55	14x11.2 6HX	14	18	112	27.5
	GNRM20×1-6HXCCH		M20x1	1.0	58	14x11.2 6HX 14x11.2	14	20	118	27.5
	GNRM20×1.5-6HXCCH		M20x1.5	1.5	58 58	6HX 14x11.2 6HX	14 14	20	118	27.5
	GNRM20×2-6HXCCH		M20x2	2.0				20	118	27.5

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC≤40)

(40-50HRC)

(50-55HRC)( > 55HRC)

涂层 Coated

★ ☆ ★ ★★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

挤压 Forming

GB/ISO 国标通用挤压丝锥系列 E/1.5-2PGB/ISO Standard General HSSE Forming Tap

型号 Model 涂层 Coated	库存 Stock	TDZ	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
GNRM3-6HXECH			M3 0.5	19	3.15x2.5	6HX	3.15	3	48	5.5
GNRM4-6HXECH			M4	0.7 21	4x3.15	6HX	4	4	53	7.7
GNRM5-6HXECH			M5	0.8 24	5x4	6HX	5	5	58	8.8
	GNRM6-6HXECH		M6	1.0	29 6.3x5	6HX	6.3	6	66	11
	GNRM8-6HXECH		M8	1.25	37 6.3x5	6HX	6.3	8	72	13.5
	GNRM10-6HXECH		M10	1.5	41 8x6.3	6HX	8	10	80	16.5
	GNRM12-6HXECH		M12	1.75	48 9x7.1	6HX	9	12	89	19.5
	GNRM14-6HXECH		M14	2.0	48 11.2x9	6HX	11.2	14	95	22
	GNRM16-6HXECH		M16	2.0	52 12.5x10	6HX	12.5	16	102	22
	GNRM18-6HXECH		M18	2.5	55 14x11.2	6HX	14	18	112	27.5
	GNRM20-6HXECH		M20	2.5	58 14x11.2	6HX	14	20	118	27.5
	GNRM3×0.35-6HXECH		M3x0.35	0.35	19 3.15x2.5	6HX	3.15	3	48	5.5
	GNRM4×0.5-6HXECH		M4x0.5	0.5	21 4x3.15	6HX	4	4	53	7.7
	GNRM5×0.5-6HXECH		M5x0.5	0.5	24 5x4	6HX	5	5	58	8.8
	GNRM6×0.5-6HXECH		M6x0.5	0.5	29 6.3x5	6HX	6.3	6	66	11
	GNRM6×0.75-6HXECH		M6x0.75	0.75	29 6.3x5	6HX	6.3	6	66	11
	GNRM8×0.75-6HXECH		M8x0.75	0.75	37 6.3x5	6HX	6.3	8	72	13.5
	GNRM8×1-6HXECH		M8x1	1.0	37 6.3x5	6HX	6.3	8	72	13.5
	GNRM10×1-6HXECH		M10x1	1.0	41	8x6.3 6HX	8	10	80	16.5
	GNRM10×1.25-6HXECH		M10x1.25	1.25	41	8x6.3 6HX	8	10	80	16.5
	GNRM12×1-6HXECH		M12x1	1.0	48	9x7.1 6HX	9	12	89	19.5
	GNRM12×1.25-6HXECH		M12x1.25	1.25	48	9x7.1 6HX	9	12	89	19.5
	GNRM12×1.5-6HXECH		M12x1.5	1.5	48	9x7.1 6HX	9	12	89	19.5
	GNRM14×1-6HXECH		M14x1	1.0	48	11.2x9 6HX	11.2	14	95	22
	GNRM14×1.25-6HXECH		M14x1.25	1.25	48	11.2x9 6HX	11.2	14	95	22
	GNRM14×1.5-6HXECH		M14x1.5	1.5	48	11.2x9 6HX	11.2	14	95	22
	GNRM16×1-6HXECH		M16x1	1.0	52	12.5x10 6HX	12.5	16	102	22
	GNRM16×1.5-6HXECH		M16x1.5	1.5	52	12.5x10 6HX 14x11.2 6HX	12.5	16	102	22
	GNRM18×1-6HXECH		M18x1	1.0	55		14	18	112	27.5
	GNRM18×1.5-6HXECH		M18x1.5	1.5	55	14x11.2 6HX 14x11.2 6HX	14	18	112	27.5
	GNRM18×2-6HXECH		M18x2	2.0 1.0	55 58	14x11.2 6HX	14 14	18	112	27.5
	GNRM20×1-6HXECH GNRM20×1.5-6HXECH		M20x1	1.5	58	14x11.2 6HX	14	20 20	118	27.5
			M20x1.5 M20x2	2.0	58	14x11.2 6HX	14	20	118 118	27.5
	GNRM20×2-6HXECH									27.5

●标准库存 ○订单生产

切削材料推荐
Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

锲金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC≤40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

涂层 Coated

★ ☆

★ ★★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

挤压 Forming

GB/ISO 国标高性能挤压丝锥系列 C/2-3PGB/ISO Standard High-Performance HSSE-PM Forming Tap

切削材料推荐 Cutting material recommendation

型号 Model 涂层 Coated	库存 Stock	TDZ	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
GNRM3-6HXCCP			M3 0.5	19	3.15x2.5	6HX	3.15	3	48	5.5
	GNRM4-6HXCCP		M4	0.7 21	4x3.15	6HX	4	4	53	7.7
	GNRM5-6HXCCP		M5	0.8 24	5x4	6HX	5	5	58	8.8
	GNRM6-6HXCCP		M6	1.0 29	6.3x5	6HX	6.3	6	66	11
	GNRM8-6HXCCP		M8	1.25	37 6.3x5	6HX	6.3	8	72	13.5
	GNRM10-6HXCCP		M10	1.5	41 8x6.3	6HX	8	10	80	16.5
	GNRM12-6HXCCP		M12	1.75	48 9x7.1	6HX	9	12	89	19.5
	GNRM14-6HXCCP		M14	2.0	48 11.2x9	6HX	11.2	14	95	22
	GNRM16-6HXCCP		M16	2.0	52 12.5x10	6HX	12.5	16	102	22
	GNRM18-6HXCCP		M18	2.5	55	14x11.2 6HX	14	18	112	27.5
	GNRM20-6HXCCP		M20	2.5	58	14x11.2 6HX	14	20	118	27.5
	GNRM3×0.35-6HXCCP		M3x0.35	0.35	19 3.15x2.5	6HX	3.15	3	48	5.5
	GNRM4×0.5-6HXCCP		M4x0.5	0.5	21 4x3.15	6HX	4	4	53	7.7
	GNRM5×0.5-6HXCCP		M5x0.5	0.5	24	5x4 6HX	5	5	58	8.8
	GNRM6×0.5-6HXCCP		M6x0.5	0.5	29	6.3x5 6HX	6.3	6	66	11
	GNRM6×0.75-6HXCCP		M6x0.75	0.75	29	6.3x5 6HX	6.3	6	66	11
	GNRM8×0.75-6HXCCP		M8x0.75	0.75	37	6.3x5 6HX	6.3	8	72	13.5
	GNRM8×1-6HXCCP		M8x1	1.0	37	6.3x5 6HX	6.3	8	72	13.5
	GNRM10×1-6HXCCP		M10x1	1.0	41	8x6.3 6HX	8	10	80	16.5
	GNRM10×1.25-6HXCCP		M10x1.25	1.25	41	8x6.3 6HX	8	10	80	16.5
	GNRM12×1-6HXCCP		M12x1	1.0	48	9x7.1 6HX	9	12	89	19.5
	GNRM12×1.25-6HXCCP		M12x1.25	1.25	48	9x7.1 6HX	9	12	89	19.5
	GNRM12×1.5-6HXCCP		M12x1.5	1.5	48	9x7.1 6HX	9	12	89	19.5
	GNRM14×1-6HXCCP		M14x1	1.0	48	11.2x9 6HX	11.2	14	95	22
	GNRM14×1.25-6HXCCP		M14x1.25	1.25	48	11.2x9 6HX	11.2	14	95	22
	GNRM14×1.5-6HXCCP		M14x1.5	1.5	48	11.2x9 6HX	11.2	14	95	22
	GNRM16×1-6HXCCP		M16x1	1.0	52	12.5x10 6HX	12.5	16	102	22
	GNRM16×1.5-6HXCCP		M16x1.5	1.5	52	12.5x10 6HX	12.5	16	102	22
	GNRM18×1-6HXCCP		M18x1	1.0	55	14x11.2 6HX	14	18	112	27.5
	GNRM18×1.5-6HXCCP		M18x1.5	1.5	55	14x11.2 6HX	14	18	112	27.5
	GNRM18×2-6HXCCP		M18x2	2.0	55	14x11.2 6HX	14	18	112	27.5
	GNRM20×1-6HXCCP		M20x1	1.0	58	14x11.2 6HX	14	20	118	27.5
	GNRM20×1.5-6HXCCP		M20x1.5	1.5	58	14x11.2 6HX	14	20	118	27.5
	GNRM20×2-6HXCCP		M20x2	2.0	58	14x11.2 6HX	14	20	118	27.5

●标准库存 ○订单生产

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel T

合金钢调制钢Alloy steelempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic、Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloybase

镍基合金Nickell-alloy

塑料Plastic

(HB≤252)

(HRC ≤ 40)

(40-50HRC) (5

0-55HRC)( > 55HRC)

涂层 Coated

★ ★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

挤压 Forming

GB/ISO 国标高性能挤压丝锥系列 E/1.5-2PGB/ISO Standard High-Performance HSSE-PM Forming Tap

切削材料推荐 Cutting material recommendation

型号 Model 涂层 Coated	库存 Stock	TDZ	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
GNRM3-6HXECP			M3 0.5	19	3.15x2.5	6HX	3.15	3	48	5.5
GNRM4-6HXECP			M4 0.7	21	4x3.15	6HX	4	4	53	7.7
GNRM5-6HXECP			M5 0.8	24	5x4	6HX	5	5	58	8.8
GNRM6-6HXECP			M6	1.0 29	6.3x5	6HX	6.3	6	66	11
	GNRM8-6HXECP		M8	1.25 37	6.3x5	6HX	6.3	8	72	13.5
	GNRM10-6HXECP		M10	1.5 41	8x6.3	6HX	8	10	80	16.5
	GNRM12-6HXECP		M12	1.75 48	9x7.1	6HX	9	12	89	19.5
	GNRM14-6HXECP		M14	2.0 48	11.2x9	6HX	11.2	14	95	22
	GNRM16-6HXECP		M16	2.0	52 12.5x10	6HX	12.5	16	102	22
	GNRM18-6HXECP		M18	2.5	55 14x11.2	6HX	14	18	112	27.5
	GNRM20-6HXECP		M20	2.5	58 14x11.2	6HX	14	20	118	27.5
	GNRM3×0.35-6HXECP		M3x0.35	0.35	19 3.15x2.5	6HX	3.15	3	48	5.5
	GNRM4×0.5-6HXECP		M4x0.5	0.5	21 4x3.15	6HX	4	4	53	7.7
	GNRM5×0.5-6HXECP		M5x0.5	0.5	24 5x4	6HX	5	5	58	8.8
	GNRM6×0.5-6HXECP		M6x0.5	0.5	29 6.3x5	6HX	6.3	6	66	11
	GNRM6×0.75-6HXECP		M6x0.75	0.75	29 6.3x5	6HX	6.3	6	66	11
	GNRM8×0.75-6HXECP		M8x0.75	0.75	37 6.3x5	6HX	6.3	8	72	13.5
	GNRM8×1-6HXECP		M8x1	1.0	37	6.3x5 6HX	6.3	8	72	13.5
	GNRM10×1-6HXECP		M10x1	1.0	41	8x6.3 6HX	8	10	80	16.5
	GNRM10×1.25-6HXECP		M10x1.25	1.25	41	8x6.3 6HX	8	10	80	16.5
	GNRM12×1-6HXECP		M12x1	1.0	48	9x7.1 6HX	9	12	89	19.5
	GNRM12×1.25-6HXECP		M12x1.25	1.25	48	9x7.1 6HX	9	12	89	19.5
	GNRM12×1.5-6HXECP		M12x1.5	1.5	48	9x7.1 6HX	9	12	89	19.5
	GNRM14×1-6HXECP		M14x1	1.0	48	11.2x9 6HX	11.2	14	95	22
	GNRM14×1.25-6HXECP		M14x1.25	1.25	48	11.2x9 6HX	11.2	14	95	22
	GNRM14×1.5-6HXECP		M14x1.5	1.5	48	11.2x9 6HX	11.2	14	95	22
	GNRM16×1-6HXECP		M16x1	1.0	52	12.5x10 6HX	12.5	16	102	22
	GNRM16×1.5-6HXECP		M16x1.5	1.5	52	12.5x10 6HX	12.5	16	102	22
	GNRM18×1-6HXECP		M18x1	1.0	55	14x11.2 6HX	14	18	112	27.5
	GNRM18×1.5-6HXECP		M18x1.5	1.5	55	14x11.2 6HX	14	18	112	27.5
	GNRM18×2-6HXECP		M18x2	2.0	55	14x11.2 6HX	14	18	112	27.5
	GNRM20×1-6HXECP		M20x1	1.0	58	14x11.2 6HX	14	20	118	27.5
	GNRM20×1.5-6HXECP		M20x1.5	1.5	58	14x11.2 6HX	14	20	118	27.5
	GNRM20×2-6HXECP		M20x2	2.0	58	14x11.2 6HX	14	20	118	27.5

●标准库存 ○订单生产

加工材料Workpiecematerial	碳素钢低合金钢Carbon steelLow-alloy steel	合金钢调制钢Alloy steelTempered Alloy stee	高硬钢、淬硬刚High-hardnessHardened steel	铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic	铸铁Cast iron	铜合金Copperalloy	铝合金铸铝Aluminumalloy	石墨Graphite	钛合金Titaniumalloy	镍基合金Nickell-base alloy	塑料Plastic
	(HB ≤252)	(HRC≤40)	(40-50HRC)(50-55HRC)( > 55HRC)
涂层 Coated	★ ★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

螺旋槽 Spiral Flute

DIN 德标通用丝锥系列 C/2-3PDIN Standard General HSSE Tap

型号 Model				尺寸 Dimension/mm
无涂层 Úncoated		涂层 Coated	Stock	TDZ	TP	LU	CZCMS	TCTR DCONMS	TD	LF	THL
DSAM2-6HCWH		DSAM2-6HCCH		M2	0.4	13	2.8x2.1	6H	2.8 2	45	4.5
	DSAM2.5-6HCWH	DSAM2.5-6HCCH		M2.5	0.45	14	2.8x2.1	6H	2.8 2.5	50	5
	DSAM3-6HCWH	DSAM3-6HCCH		M3	0.5	18	3.5x2.7	6H	3.5 3	56	5.5
	DSAM4-6HCWH	DSAM4-6HCCH		M4	0.7	21	4.5x3.4	6H	4.5 4	63	7
	DSAM5-6HCWH	DSAM5-6HCCH		M5	0.8	25	6x4.9	6H	6 5	70	8
	DSAM6-6HCWH	DSAM6-6HCCH		M6	1.0	29	6x4.9	6H	6 6	80	10
	DSAM8-6HCWH	DSAM8-6HCCH		M8	1.25	35	8x6.2	6H	8 8	90	14
	DSAM10-6HCWH	DSAM10-6HCCH		M10	1.5	39	10x8	6H	10 10	100	16
	DSAM12-6HCWH	DSAM12-6HCCH		M12	1.75	49	9x7	6H	9 12	110	18.5
	DSAM14-6HCWH	DSAM14-6HCCH		M14	2.0	53	11x9	6H	11 14	110	20
	DSAM16-6HCWH	DSAM16-6HCCH		M16	2.0	54	12x9	6H	12 16	110	20
	DSAM18-6HCWH	DSAM18-6HCCH		M18	2.5	62	14x11	6H	14 18	125	25
	DSAM20-6HCWH	DSAM20-6HCCH		M20	2.5	68	16x12	6H	16 20	140	25
	DSAM3×0.35-6HCWH	DSAM3×0.35-6HCCH		M3x0.35	0.35	18	3.5x2.7	6H	3.5 3	56	5.5
	DSAM4×0.5-6HCWH	DSAM4×0.5-6HCCH		M4x0.5	0.5	21	4.5x3.4	6H	4.5 4	63	7
	DSAM5×0.5-6HCWH	DSAM5×0.5-6HCCH		M5x0.5	0.5	25	6x4.9	6H	6 5	70	8
	DSAM6×0.5-6HCWH	DSAM6×0.5-6HCCH		M6x0.5	0.5	29	6x4.9	6H	6 6	80	10
	DSAM6×0.75-6HCWH	DSAM6×0.75-6HCCH		M6x0.75	0.75	29	6x4.9	6H	6 6	80	10
	DSAM8×0.75-6HCWH	DSAM8×0.75-6HCCH		M8x0.75	0.75	35	8x6.2	6H	8 8	90	14
	DSAM8×1-6HCWH	DSAM8×1-6HCCH		M8x1	1.0	35	8x6.2	6H	8 8	90	14
	DSAM10×1-6HCWH	DSAM10×1-6HCCH		M10x1	1.0	39	10x8	6H	10 10	100	16
	DSAM10×1.25-6HCWH	DSAM10×1.25-6HCCH		M10x1.25	1.25 1.0	39	10x8	6H	10 10 9 12	100	16
	DSAM12×1-6HCWH	DSAM12×1-6HCCH DSAM12×1.25-6HCCH		M12x1 M12x1.25	1.25	49	9x7 9x7	6H	9 12	110	18.5
	DSAM12×1.25-6HCWH DSAM12×1.5-6HCWH	DSAM12×1.5-6HCCH		M12x1.5	1.5	49 49	9x7	6H 6H	9 12	110 110	18.5
	DSAM14×1-6HCWH	DSAM14×1-6HCCH		M14x1	1.0	53	11x9	6H	11 14	110	18.5
	DSAM14×1.25-6HCWH	DSAM14×1.25-6HCCH		M14x1.25	1.25	53	11x9	6H	11 14	110	20
	DSAM14×1.5-6HCWH	DSAM14×1.5-6HCCH		M14x1.5	1.5	53	11x9	6H	11 14	110	20
	DSAM16×1-6HCWH	DSAM16×1-6HCCH		M16x1	1.0	54	12x9	6H	12 16	110	20 20
	DSAM16×1.5-6HCWH	DSAM16×1.5-6HCCH		M16x1.5	1.5	54	12x9	6H	12 16	110	20
	DSAM18×1-6HCWH	DSAM18×1-6HCCH		M18x1	1.0	62	14x11	6H	14 18	125	25
	DSAM18×1.5-6HCWH	DSAM18×1.5-6HCCH		M18x1.5	1.5	62	14x11	6H	14 18	125	25
	DSAM18×2-6HCWH	DSAM18×2-6HCCH		M18x2	2.0	62	14x11	6H	14 18	125	25
	DSAM20×1-6HCWH	DSAM20×1-6HCCH		M20x1	1.0	68	16x12	6H	16 20	140	25
	DSAM20×1.5-6HCWH	DSAM20×1.5-6HCCH		M20x1.5 M20x2	1.5 2.0	68	16x12	6H 6H	16 20 16 20	140	25

●标准库存 ○订单生产

切削材料推荐
Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)(

> 55HRC)

无涂层 Uncoated

☆

涂层 Coated

★ ★

★

☆★★ ☆☆

螺尖 Spiral Point
DIN 德标通用丝锥系列 B/3.5-5.5P
DIN Standard General HSSE Tap

型号库存 Model				尺寸 Dimension/mm
无涂层 Úncoated	涂层 Coated	Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
DPOM2-6HXBWH		DPOM2-6HXBCH		M2	0.4	13 2.8x2.1	6HX	2.8	2	45	6
DPOM2.5-6HXBWH		DPOM2.5-6HXBCH		M2.5	0.45 14	2.8x2.1	6HX	2.8	2.5	50	8
DPOM3-6HXBWH		DPOM3-6HXBCH		M3 0.5	18	3.5x2.7	6HX	3.5	3	56	10
DPOM4-6HXBWH		DPOM4-6HXBCH		M4 0.7	21	4.5x3.4	6HX	4.5	4	63	12
DPOM5-6HXBWH		DPOM5-6HXBCH		M5	0.8 25	6x4.9	6HX	6	5	70	14
DPOM6-6HXBWH		DPOM6-6HXBCH		M6	1.0 29	6x4.9	6HX	6	6	80	16
DPOM8-6HXBWH		DPOM8-6HXBCH		M8	1.25 35	8x6.2	6HX	8	8	90	18
DPOM10-6HXBWH		DPOM10-6HXBCH		M10	1.5 39	10x8	6HX	10	10	100	20
	DPOM12-6HXBWH	DPOM12-6HXBCH		M12	1.75 49	9x7	6HX	9	12	110	24
	DPOM14-6HXBWH	DPOM14-6HXBCH		M14	2.0 53	11x9	6HX	11	14	110	26
	DPOM16-6HXBWH	DPOM16-6HXBCH		M16	2.0 54	12x9	6HX	12	16	110	26
	DPOM18-6HXBWH	DPOM18-6HXBCH		M18	2.5 62	14x11	6HX	14	18	125	30
	DPOM20-6HXBWH	DPOM20-6HXBCH		M20	2.5	68 16x12	6HX	16	20	140	32
	DPOM3×0.35-6HXBWH	DPOM3×0.35-6HXBCH		M3x0.35	0.35	18 3.5x2.7	6HX	3.5	3	56	10
	DPOM4×0.5-6HXBWH	DPOM4×0.5-6HXBCH		M4x0.5	0.5	21 4.5x3.4	6HX	4.5	4	63	12
	DPOM5×0.5-6HXBWH	DPOM5×0.5-6HXBCH		M5x0.5	0.5	25 6x4.9	6HX	6	5	70	14
	DPOM6×0.5-6HXBWH	DPOM6×0.5-6HXBCH		M6x0.5 M6x0.75	0.5 0.75	29 6x4.9	6HX 6HX	6	6	80	16
	DPOM6×0.75-6HXBWH	DPOM6×0.75-6HXBCH			0.75	29 6x4.9 8x6.2	6HX	6 8	6 8	80	16
	DPOM8×0.75-6HXBWH	DPOM8×0.75-6HXBCH DPOM8×1-6HXBCH		M8x0.75 M8x1	1.0	35 35 8x6.2	6HX	8	8	90	18
	DPOM8×1-6HXBWH	DPOM10×1-6HXBCH		M10x1	1.0	39 10x8	6HX	10	10	90	18
	DPOM10×1-6HXBWH	DPOM10×1.25-6HXBCH		M10x1.25	1.25	39 10x8	6HX	10	10	100	20
	DPOM10×1.25-6HXBWH	DPOM12×1-6HXBCH		M12x1	1.0	49 9x7	6HX	9	12	100 110	20
	DPOM12×1-6HXBWH DPOM12×1.25-6HXBWH	DPOM12×1.25-6HXBCH		M12x1.25	1.25	49 9x7	6HX	9	12	110	24
	DPOM12×1.5-6HXBWH	DPOM12×1.5-6HXBCH		M12x1.5	1.5	49 9x7	6HX	9	12	110	24
	DPOM14×1-6HXBWH	DPOM14×1-6HXBCH		M14x1	1.0	53 11x9	6HX	11	14	110	24
	DPOM14×1.25-6HXBWH	DPOM14×1.25-6HXBCH		M14x1.25	1.25	53 11x9	6HX	11	14	110	26
	DPOM14×1.5-6HXBWH	DPOM14×1.5-6HXBCH		M14x1.5	1.5	53 11x9	6HX	11	14	110	26 26
	DPOM16×1-6HXBWH	DPOM16×1-6HXBCH		M16x1	1.0	54 12x9	6HX	12	16	110	26
	DPOM16×1.5-6HXBWH	DPOM16×1.5-6HXBCH		M16x1.5	1.5	54 12x9	6HX	12	16	110	26
	DPOM18×1-6HXBWH	DPOM18×1-6HXBCH		M18x1	1.0	62 14x11	6HX	14	18	125	30
	DPOM18×1.5-6HXBWH	DPOM18×1.5-6HXBCH		M18x1.5	1.5	62 14x11	6HX	14	18	125	30
	DPOM18×2-6HXBWH	DPOM18×2-6HXBCH		M18x2	2.0	62 14x11	6HX	14	18	125	30
	DPOM20×1-6HXBWH	DPOM20×1-6HXBCH		M20x1	1.0	68 16x12	6HX	16	20	140	32
	DPOM20×1.5-6HXBWH DPOM20×2-6HXBWH	DPOM20×1.5-6HXBCH DPOM20×2-6HXBCH		M20x1.5 M20x2	1.5 2.0	68 16x12 68	6HX 16x12 6HX	16 16	20 20	140 140	32

●标准库存 ○订单生产

切削材料推荐
Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

无涂层 Uncoated

☆

涂层 Coated

★

☆

★

☆

直槽 Straight FluteDIN 德标通用丝锥系列 C/2-3PDIN Standard General HSSE Tap

型号库存 Model				尺寸 Dimension/mm
无涂层 Úncoated	涂层 Coated	Stock	TDZ	TP	LU	CZCMS	TCTR DCONMS		TD	LF	THL
DHTM2-6HXCWH	DHTM2-6HXCCH		M2	0.4	13	2.8x2.1	6HX	2.8	2	45	6
DHTM2.5-6HXCWH	DHTM2.5-6HXCCH		M2.5	0.45	14	2.8x2.1	6HX	2.8	2.5	50	8
DHTM3-6HXCWH	DHTM3-6HXCCH		M3	0.5	18	3.5x2.7	6HX	3.5	3	56	10
DHTM4-6HXCWH	DHTM4-6HXCCH		M4	0.7	21	4.5x3.4	6HX	4.5	4	63	12
DHTM5-6HXCWH	DHTM5-6HXCCH		M5	0.8	25	6x4.9	6HX	6	5	70	14
DHTM6-6HXCWH	DHTM6-6HXCCH		M6	1.0	29	6x4.9	6HX	6	6	80	16
DHTM8-6HXCWH	DHTM8-6HXCCH		M8	1.25	35	8x6.2	6HX	8	8	90	18
DHTM10-6HXCWH	DHTM10-6HXCCH		M10	1.5	39	10x8	6HX	10	10	100	20
DHTM12-6HXCWH	DHTM12-6HXCCH		M12	1.75	49	9x7	6HX	9	12	110	24
DHTM14-6HXCWH	DHTM14-6HXCCH		M14	2.0	53	11x9	6HX	11	14	110	26
DHTM16-6HXCWH	DHTM16-6HXCCH		M16	2.0	54	12x9	6HX	12	16	110	26
DHTM18-6HXCWH	DHTM18-6HXCCH		M18	2.5	62	14x11	6HX	14	18	125	30
DHTM20-6HXCWH	DHTM20-6HXCCH		M20	2.5	68	16x12	6HX	16	20	140	32
DHTM3×0.35-6HXCWH	DHTM3×0.35-6HXCCH		M3x0.35	0.35	18	3.5x2.7	6HX	3.5	3	56	10
DHTM4×0.5-6HXCWH	DHTM4×0.5-6HXCCH		M4x0.5	0.5	21	4.5x3.4	6HX	4.5	4	63	12
DHTM5×0.5-6HXCWH	DHTM5×0.5-6HXCCH		M5x0.5	0.5	25	6x4.9	6HX	6	5	70	14
DHTM6×0.5-6HXCWH	DHTM6×0.5-6HXCCH		M6x0.5	0.5	29	6x4.9	6HX	6	6	80	16
DHTM6×0.75-6HXCWH	DHTM6×0.75-6HXCCH		M6x0.75	0.75	29	6x4.9	6HX	6	6	80	16
DHTM8×0.75-6HXCWH	DHTM8×0.75-6HXCCH		M8x0.75	0.75 1.0	35 35	8x6.2 8x6.2	6HX 6HX	8	8	90	18
DHTM8×1-6HXCWH	DHTM8×1-6HXCCH DHTM10×1-6HXCCH		M8x1	1.0	39	10x8	6HX	8	8 10	90	18
DHTM10×1-6HXCWH	DHTM10×1.25-6HXCCH		M10x1	1.25	39	10x8	6HX	10 10	10	100	20
DHTM10×1.25-6HXCWH	DHTM12×1-6HXCCH		M10x1.25 M12x1	1.0	49	9x7	6HX	9	12	100	20
DHTM12×1-6HXCWH	DHTM12×1.25-6HXCCH		M12x1.25	1.25	49	9x7	6HX	9	12	110	24
DHTM12×1.25-6HXCWH	DHTM12×1.5-6HXCCH		M12x1.5	1.5	49	9x7	6HX	9	12	110	24
DHTM12×1.5-6HXCWH	DHTM14×1-6HXCCH		M14x1	1.0	53	11x9	6HX	11	14	110 110	24
DHTM14×1-6HXCWH	DHTM14×1.25-6HXCCH		M14x1.25	1.25	53	11x9	6HX	11	14	110	26
DHTM14×1.25-6HXCWH	DHTM14×1.5-6HXCCH		M14x1.5	1.5	53	11x9	6HX	11	14	110	26
DHTM14×1.5-6HXCWH	DHTM16×1-6HXCCH		M16x1	1.0	54	12x9	6HX	12	16	110	26
DHTM16×1-6HXCWH	DHTM16×1.5-6HXCCH		M16x1.5	1.5	54	12x9	6HX	12	16	110	26
DHTM16×1.5-6HXCWH	DHTM18×1-6HXCCH		M18x1	1.0	62	14x11	6HX	14	18	125	26
DHTM18×1-6HXCWH	DHTM18×1.5-6HXCCH		M18x1.5	1.5	62	14x11	6HX	14	18	125	30 30
DHTM18×1.5-6HXCWH	DHTM18×2-6HXCCH		M18x2	2.0	62	14x11	6HX	14	18	125	30
DHTM18×2-6HXCWH DHTM20×1-6HXCWH	DHTM20×1-6HXCCH		M20x1	1.0	68	16x12	6HX	16	20	140	32
DHTM20×1.5-6HXCWH	DHTM20×1.5-6HXCCH	DHTM20×2-6HXCCH	M20x1.5	1.5 M20x2 2.0	68 68	16x12 16x12	6HX 6HX	16 16	20 20	140	32

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic、Austenitic

铸铁Cast iron

铜合金CopperCalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

无涂层 Uncoated

☆ ☆

☆ ☆☆☆ ☆ ☆☆

涂层 Coated

★ ★

直槽 Straight FluteDIN 德标通用丝锥系列 E/1.5-2PDIN Standard General HSSE Tap

型号 Model				尺寸 Dimension/mm
无涂层 Úncoated	涂层 Coated	库存 Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
DHTM2-6HXEWH		DHTM2-6HXECH		M2	0.4	13	2.8x2.1 6HX	2.8	2	45	6
DHTM2.5-6HXEWH		DHTM2.5-6HXECH		M2.5	0.45 14	2.8x2.1	6HX	2.8	2.5	50	8
DHTM3-6HXEWH	DHTM3-6HXECH			M3 0.5	18	3.5x2.7	6HX	3.5	3	56	10
DHTM4-6HXEWH	DHTM4-6HXECH			M4 0.7	21	4.5x3.4	6HX	4.5	4	63	12
DHTM5-6HXEWH	DHTM5-6HXECH			M5 0.8	25	6x4.9	6HX	6	5	70	14
DHTM6-6HXEWH	DHTM6-6HXECH			M6	1.0 29	6x4.9	6HX	6	6	80	16
DHTM8-6HXEWH	DHTM8-6HXECH			M8	1.25 35	8x6.2	6HX	8	8	90	18
DHTM10-6HXEWH	DHTM10-6HXECH			M10	1.5 39	10x8	6HX	10	10	100	20
DHTM12-6HXEWH		DHTM12-6HXECH		M12	1.75 49	9x7	6HX	9	12	110	24
DHTM14-6HXEWH		DHTM14-6HXECH		M14	2.0 53	11x9	6HX	11	14	110	26
DHTM16-6HXEWH		DHTM16-6HXECH		M16	2.0	54 12x9	6HX	12	16	110	26
DHTM18-6HXEWH		DHTM18-6HXECH		M18	2.5	62 14x11	6HX	14	18	125	30
DHTM20-6HXEWH		DHTM20-6HXECH		M20	2.5	68 16x12	6HX	16	20	140	32
	DHTM3×0.35-6HXEWH	DHTM3×0.35-6HXECH		M3x0.35	0.35	18 3.5x2.7	6HX	3.5	3	56	10
	DHTM4×0.5-6HXEWH	DHTM4×0.5-6HXECH		M4x0.5	0.5	21 4.5x3.4	6HX	4.5	4	63	12
	DHTM5×0.5-6HXEWH	DHTM5×0.5-6HXECH		M5x0.5	0.5	25 6x4.9	6HX	6	5	70	14
	DHTM6×0.5-6HXEWH	DHTM6×0.5-6HXECH		M6x0.5	0.5	29 6x4.9	6HX	6	6	80	16
	DHTM6×0.75-6HXEWH	DHTM6×0.75-6HXECH		M6x0.75	0.75	29 6x4.9	6HX	6	6	80	16
	DHTM8×0.75-6HXEWH	DHTM8×0.75-6HXECH		M8x0.75 M8x1	0.75 1.0	35 8x6.2 35	6HX 8x6.2 6HX	8 8	8 8	90	18
	DHTM8×1-6HXEWH	DHTM8×1-6HXECH DHTM10×1-6HXECH		M10x1	1.0	39	10x8 6HX		10	90	18
	DHTM10×1-6HXEWH	DHTM10×1.25-6HXECH		M10x1.25	1.25	39	10x8 6HX	10 10	10	100	20
	DHTM10×1.25-6HXEWH	DHTM12×1-6HXECH		M12x1	1.0	49	9x7 6HX	9	12	100	20
	DHTM12×1-6HXEWH	DHTM12×1.25-6HXECH		M12x1.25	1.25	49	9x7 6HX	9	12	110	24
	DHTM12×1.25-6HXEWH	DHTM12×1.5-6HXECH		M12x1.5	1.5	49	9x7 6HX	9	12	110 110	24
	DHTM12×1.5-6HXEWH DHTM14×1-6HXEWH	DHTM14×1-6HXECH		M14x1	1.0	53	11x9 6HX	11	14	110	24
	DHTM14×1.25-6HXEWH	DHTM14×1.25-6HXECH		M14x1.25	1.25	53	11x9 6HX	11	14	110	26
	DHTM14×1.5-6HXEWH	DHTM14×1.5-6HXECH		M14x1.5	1.5	53	11x9 6HX	11	14	110	26
	DHTM16×1-6HXEWH	DHTM16×1-6HXECH		M16x1	1.0	54	12x9 6HX	12	16	110	26
	DHTM16×1.5-6HXEWH	DHTM16×1.5-6HXECH		M16x1.5	1.5	54 12x9	6HX	12	16	110	26 26
	DHTM18×1-6HXEWH	DHTM18×1-6HXECH		M18x1	1.0	62 14x11	6HX	14	18	125	30
	DHTM18×1.5-6HXEWH	DHTM18×1.5-6HXECH		M18x1.5	1.5	62 14x11	6HX	14	18	125	30
	DHTM18×2-6HXEWH	DHTM18×2-6HXECH		M18x2	2.0	62	14x11 6HX	14	18	125	30
	DHTM20×1-6HXEWH	DHTM20×1-6HXECH		M20x1	1.0	68	16x12 6HX	16	20	140	32
DHTM20×2-6HXEWH	DHTM20×1.5-6HXEWH	DHTM20×1.5-6HXECH DHTM20×2-6HXECH		M20x1.5 M20x2	1.5 2.0	68 68	16x12 6HX 16x12 6HX	16 16	20 20	140 140	32

●标准库存 ○订单生产

切削材料推荐
Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC≤40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

无涂层 Uncoated

☆

涂层 Coated

★

☆

切削材料推荐 Cutting material recommendation

螺旋槽 Spiral Flute

DIN 德标高性能丝锥系列 C/2-3PDIN Standard High-Performance HSSE-PM Tap

型号 Model 涂层 Coated		库存 Stock	尺寸 Dimension/mm
型号 Model 涂层 Coated		库存 Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS TD	LF	THL
DSAM2-6HCCP			M2 0.4	13	2.8x2.1	S	2.8	2	45	4.5
DSAM2.5-6HCCP			M2.5	0.45	14 2.8x2.1	6H	2.8	2.5	50	5
DSAM3-6HCCP			M3	0.5	18 3.5x2.7	6H	3.5	3	56	5.5
DSAM4-6HCCP			M4	0.7	21 4.5x3.4	6H	4.5	4	63	7
	DSAM5-6HCCP		M5	0.8	25 6x4.9	6H	6	5	70	8
	DSAM6-6HCCP		M6	1.0	29 6x4.9	6H	6	6	80	10
	DSAM8-6HCCP		M8	1.25	35 8x6.2	6H	8	8	90	14
	DSAM10-6HCCP		M10	1.5	39	10x8 6H	10	10	100	16
	DSAM12-6HCCP		M12	1.75	49	9x7 6H	9	12	110	18.5
	DSAM14-6HCCP		M14	2.0	53	11x9 6H	11	14	110	20
	DSAM16-6HCCP		M16	2.0	54	12x9 6H	12	16	110	20
	DSAM18-6HCCP		M18	2.5	62	14x11 6H	14	18	125	25
	DSAM20-6HCCP		M20	2.5	68	16x12 6H	16	20	140	25
	DSAM22-6HCCP		M22	2.5	68	18x14.5 6H	18	22	140	25
	DSAM24-6HCCP		M24	3.0	78 18x14.5	6H	18	24	160	30
	DSAM27-6HCCP		M27	3.0	86 20x16	6H	20	27	160	30
	DSAM30-6HCCP		M30	3.5	100 22x18	6H	22	30	180	35
	DSAM33-6HCCP		M33	3.5	104 25x20	6H	25	33	180	35
	DSAM36-6HCCP		M36	4.0	118 28x22	6H	28	36	200	40
	DSAM3×0.35-6HCCP		M3x0.35	0.35	18 3.5x2.7	6H	3.5	3	56	5.5
	DSAM4×0.5-6HCCP		M4x0.5	0.5	21 4.5x3.4	6H	4.5	4	63	7
	DSAM5×0.5-6HCCP		M5x0.5	0.5	25 6x4.9	6H	6	5	70	8
	DSAM6×0.5-6HCCP		M6x0.5	0.5	29 6x4.9	6H	6	6	80	10
	DSAM6×0.75-6HCCP		M6x0.75	0.75	29 6x4.9	6H	6	6	80	10
	DSAM8×0.75-6HCCP		M8x0.75	0.75	35 8x6.2	6H	8	8	90	14
	DSAM8×1-6HCCP		M8x1	1.0	35 8x6.2	6H	8	8	90	14
	DSAM10×1-6HCCP		M10x1	1.0	39 10x8	6H	10	10	100	16
	DSAM10×1.25-6HCCP		M10x1.25	1.25	39	10x8 6H	10	10	100	16

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloybase

镍基珠金Nickell-alloy

塑料Plastic

(HB ≤ 252)

(HRC≤40)

(40-50HRC)

(50-55HRC)( &

gt; 55HRC)

涂层 Coated

★

★ ★

☆★★ ★☆

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

螺旋槽 Spiral Flute

DIN 德标高性能丝锥系列 C/2-3P

DIN Standard High-Performance HSSE-PM Taps

切削材料推荐 Cutting material recommendation

型号 Model 涂层 Coated		库存 Stock	尺寸 Dimension/mm
型号 Model 涂层 Coated		库存 Stock	TDZ TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
DSAM12×1-6HCCP			M12x1 1.0	49	9x7	6H	9	12	110	18.5
	DSAM12×1.25-6HCCP		M12x1.25	1.25 49	9x7	6H	9	12	110	18.5
	DSAM12×1.5-6HCCP		M12x1.5	1.5 49	9x7	6H	9	12	110	18.5
	DSAM14×1-6HCCP		M14x1	1.0 53	11x9	6H	11	14	110	20
	DSAM14×1.25-6HCCP		M14x1.25	1.25 53	11x9	6H	11	14	110	20
	DSAM14×1.5-6HCCP		M14x1.5	1.5 53	11x9	6H	11	14	110	20
	DSAM16×1-6HCCP		M16x1	1.0 54	12x9	6H	12	16	110	20
	DSAM16×1.5-6HCCP		M16x1.5	1.5 54	12x9	6H	12	16	110	20
	DSAM18×1-6HCCP		M18x1	1.0 62	14x11	6H	14	18	125	25
	DSAM18×1.5-6HCCP		M18x1.5	1.5 62	14x11	6H	14	18	125	25
	DSAM18×2-6HCCP		M18x2	2.0 62	14x11	6H	14	18	125	25
	DSAM20×1-6HCCP		M20x1	1.0 68	16x12	6H	16	20	140	25
	DSAM20×1.5-6HCCP		M20x1.5	1.5 68	16x12	6H	16	20	140	25
	DSAM20×2-6HCCP		M20x2	2.0 68	16x12	6H	16	20	140	25
	DSAM22×1-6HCCP		M22x1	1.0 68	18x14.5	6H	18	22	140	25
	DSAM22×1.5-6HCCP		M22x1.5	1.5 68	18x14.5	6H	18	22	140	25
	DSAM22×2-6HCCP		M22x2	2.0 68	18x14.5	6H	18	22	140	25
	DSAM24×1-6HCCP		M24x1	1.0 78	18x14.5	6H	18	24	160	30
	DSAM24×1.5-6HCCP		M24x1.5	1.5 78	18x14.5	6H	18	24	160	30
	DSAM24×2-6HCCP		M24x2	2.0 78	18x14.5	6H	18	24	160	30
	DSAM27×1.5-6HCCP		M27x1.5	1.5 86	20x16	6H	20	27	160	30
	DSAM27×2-6HCCP		M27x2	2.0 86	20x16	6H	20	27	160	30
	DSAM30×1.5-6HCCP		M30x1.5	1.5 100	22x18	6H	22	30	180	35
	DSAM30×2-6HCCP		M30x2	2.0 100	22x18	6H	22	30	180	35
	DSAM33×1.5-6HCCP		M33x1.5	1.5 104	25x20	6H	25	33	180	35
	DSAM33×2-6HCCP		M33x2	2.0 104	25x20 28x22	6H	25	33	180	35
	DSAM36×2-6HCCP		M36x2	2.0 118	28x22	6H 6H	28	36	200	40
	DSAM36×3-6HCCP		M36x3	3.0 118			28	36	200	40

●标准库存 ○订单生产

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC≤40)

(40-50HRC)

(50-55HRC)( > 55HRC)

涂层 Coated

★ ★ ★ ☆★★ ★☆

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

螺尖 Spiral Point

DIN 德标高性能丝锥系列 B/3.5-5.5PDIN Standard High-Performance HSSE-PM Tap

B TP 3.5-5.5P

型号 Model 涂层 Coated	库存 Stock	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Stock	TDZ	TP LU		CZCMS TCTR	DCONMS	TD	LF	THL
DPOM2-6HXBCP		M2	0.4	13	2.8x2.1 6HX	2.8	2	45	6
DPOM2.5-6HXBCP		M2.5	0.45	14	2.8x2.1 6HX	2.8	2.5	50	8
DPOM3-6HXBCP		M3	0.5	18	3.5x2.7 6HX	3.5	3	56	10
DPOM4-6HXBCP		M4	0.7	21	4.5x3.4 6HX	4.5	4	63	12
	DPOM5-6HXBCP	M5	0.8	25	6x4.9 6HX	6	5	70	14
	DPOM6-6HXBCP	M6	1.0	29	6x4.9 6HX	6	6	80	16
	DPOM8-6HXBCP	M8	1.25	35	8x6.2 6HX	8	8	90	18
	DPOM10-6HXBCP	M10	1.5	39	10x8 6HX	10	10	100	20
	DPOM12-6HXBCP	M12	1.75	49	9x7 6HX	9	12	110	24
	DPOM14-6HXBCP	M14	2.0	53	11x9 6HX	11	14	110	26
	DPOM16-6HXBCP	M16	2.0	54	12x9 6HX	12	16	110	26
	DPOM18-6HXBCP	M18	2.5	62	14x11 6HX	14	18	125	30
	DPOM20-6HXBCP	M20	2.5	68	16x12 6HX	16	20	140	32
	DPOM3×0.35-6HXBCP	M3x0.35	0.35	18	3.5x2.7	6HX 3.5	3	56	10
	DPOM4×0.5-6HXBCP	M4x0.5	0.5	21	4.5x3.4 6HX	4.5	4	63	12
	DPOM5×0.5-6HXBCP	M5x0.5	0.5	25	6x4.9 6HX	6	5	70	14
	DPOM6×0.5-6HXBCP	M6x0.5	0.5	29	6x4.9 6HX	6	6	80	16
	DPOM6×0.75-6HXBCP	M6x0.75	0.75	29	6x4.9 6HX	6	6	80	16
	DPOM8×0.75-6HXBCP	M8x0.75	0.75	35	8x6.2	6HX 8	8	90	18
	DPOM8×1-6HXBCP	M8x1	1.0	35	8x6.2	6HX 8	8	90	18
	DPOM10×1-6HXBCP	M10x1	1.0	39	10x8	6HX 10	10	100	20
	DPOM10×1.25-6HXBCP	M10x1.25	1.25	39	10x8	6HX 10	10	100	20
	DPOM12×1-6HXBCP	M12x1	1.0	49	9x7	6HX 9	12	110	24
	DPOM12×1.25-6HXBCP	M12x1.25	1.25	49	9x7	6HX 9	12	110	24
	DPOM12×1.5-6HXBCP	M12x1.5	1.5	49	9x7	6HX 9	12	110	24
	DPOM14×1-6HXBCP	M14x1	1.0	53	11x9	6HX 11	14	110	26
	DPOM14×1.25-6HXBCP	M14x1.25	1.25	53	11x9	6HX 11	14	110	26
	DPOM14×1.5-6HXBCP	M14x1.5	1.5	53	11x9	6HX 11	14	110	26
	DPOM16×1-6HXBCP	M16x1	1.0	54	12x9 12x9	6HX 12	16	110	26
	DPOM16×1.5-6HXBCP	M16x1.5	1.5	54	14x11	6HX 12 6HX 14	16	110	26
	DPOM18×1-6HXBCP	M18x1	1.0 1.5	62 62	14x11	6HX 14	18	125	30
	DPOM18×1.5-6HXBCP	M18x1.5	2.0	62	14x11	6HX 14	18 18	125	30
	DPOM18×2-6HXBCP	M18x2		68	16x12	6HX 16		125	30
	DPOM20×1-6HXBCP	M20x1	1.0	68	16x12	6HX 16	20	140	32
	DPOM20×1.5-6HXBCP	M20x1.5	1.5			16	20	140	32
	DPOM20×2-6HXBCP	M20x2	2.0	68	16x12	6HX	20	140	32

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料 Workpiece

碳素钢低合金钢 Carbon steel Low-alloy steel

合金钢调制钢 Alloy steel

高硬钢、淬硬刚 High-hardness Hardened steel

铁素体、马氏体奥氏体不锈钢 Femitic、 Martensitic、

铸铁 Cast iron

铜合金 Copper alloy

铝合金铸铝 Aluminum alloy

石墨 Graphite

钛合金 Titanium alloy

镍基合金 Nickell- base alloy

塑料 Plastic

material

(HB≤252)

Tempered Alloy steel (HRC ≤ 40)

(40-50HRC)

(50-55HRC)( > 55HRC)

Austenitic

涂层 Coated

★

☆★★

★☆

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

直槽 Straight FluteDIN 德标高性能丝锥系列 C/2-3PDIN Standard High-Performance HSSE-PM Tap

Cutting material recommendation

型号 Model 涂层 Coated	库存 Śtock		尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Śtock		TDZ TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
DHTM2-6HXCCP		M2	0.4	13	2.8x2.1	6HX	2.8	2	45	6
	DHTM2.5-6HXCCP	M2.5	0.45	14	2.8x2.1	6HX	2.8	2.5	50	8
DHTM3-6HXCCP		M3	0.5	18	3.5x2.7	6HX	3.5	3	56	10
	DHTM4-6HXCCP	M4	0.7	21	4.5x3.4	6HX	4.5	4	63	12
	DHTM5-6HXCCP	M5	0.8		25 6x4.9	6HX	6	5	70	14
	DHTM6-6HXCCP		M6 1.0		29 6x4.9	6HX	6	6	80	16
	DHTM8-6HXCCP		M8 1.25		35	8x6.2	6HX 8	8	90	18
	DHTM10-6HXCCP		M10 1.5		39	10x8	6HX 10	10	100	20
	DHTM12-6HXCCP		M12	1.75	49	9x7	6HX 9	12	110	24
	DHTM14-6HXCP		M14	2.0	53	11x9	6HX 11	14	110	26
	DHTM16-6HXCCP		M16	2.0	54	12x9	6HX 12	16	110	26
	DHTM18-6HXCCP		M18	2.5	62	14x11	6HX 14	18	125	30
	DHTM20-6HXCCP		M20	2.5	68	16x12	6HX 16	20	140	32
	DHTM3×0.35-6HXCCP		M3x0.35	0.35	18	3.5x2.7	6HX 3.5	3	56	10
	DHTM4×0.5-6HXCCP		M4x0.5	0.5	21	4.5x3.4	6HX 4.5	4	63	12
	DHTM5×0.5-6HXCCP		M5x0.5	0.5	25	6x4.9	6HX	6 5	70	14
	DHTM6×0.5-6HXCCP		M6x0.5	0.5	29	6x4.9	6HX	6 6	80	16
	DHTM6×0.75-6HXCCP		M6x0.75	0.75	29	6x4.9	6HX	6 6	80	16
	DHTM8×0.75-6HXCCP		M8x0.75	0.75	35	8x6.2	6HX	8 8	90	18
	DHTM8×1-6HXCCP		M8x1	1.0	35	8x6.2	6HX	8 8	90	18
	DHTM10×1-6HXCCP		M10x1	1.0	39	10x8	6HX	10 10	100	20
	DHTM10×1.25-6HXCCP		M10x1.25	1.25	39	10x8	6HX	10 10	100	20
	DHTM12×1-6HXCCP		M12x1	1.0	49	9x7	6HX	9 12	110	24
	DHTM12×1.25-6HXCCP		M12x1.25	1.25	49	9x7	6HX	9 12	110	24
	DHTM12×1.5-6HXCCP		M12x1.5	1.5	49	9x7	6HX	9 12	110	24
	DHTM14×1-6HXCCP		M14x1	1.0	53	11x9	6HX	11 14	110	26
	DHTM14×1.25-6HXCCP		M14x1.25	1.25	53	11x9	6HX	11 14	110	26
	DHTM14×1.5-6HXCCP		M14x1.5	1.5	53	11x9	6HX	11 14	110	26
	DHTM16×1-6HXCCP		M16x1	1.0	54	12x9	6HX	12 16	110	26
	DHTM16×1.5-6HXCCP		M16x1.5	1.5	54	12x9	6HX	12 16	110	26
	DHTM18×1-6HXCCP		M18x1	1.0	62	14x11 14x11	6HX	14 18	125	30
	DHTM18×1.5-6HXCCP		M18x1.5	1.5	62	14x11	6HX	14 18	125	30
	DHTM18×2-6HXCCP		M18x2	2.0	62	16x12	6HX	14 18	125	30
	DHTM20×1-6HXCCP		M20x1	1.0	68		6HX 6HX	16 20	140	32
	DHTM20×1.5-6HXCCP		M20x1.5	1.5	68	16x12		16 20	140	32
	DHTM20×2-6HXCCP		M20x2	2.0	68	16x12	6HX	16 20	140	32

●标准库存 ○订单生产

切削材料推荐

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB ≤252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)( &

gt; 55HRC)

涂层 Coated

★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

直槽 Straight Flute

DIN 德标高性能丝锥系列 E/1.5-2PDIN Standard High-Performance HSSE-PM Tap

型号 Model 涂层 Coated		库存 Stock	尺寸 Dimension/mm
型号 Model 涂层 Coated		库存 Stock	TDZ	TP	LU	CZCMS	TCTR DCONMS	TD	LF	THL
DHTM2-6HXECP			M2	0.4	13 2.8x2.1	6HX	2.8	2	45	6
	DHTM2.5-6HXECP		M2.5	0.45	14	2.8x2.1 6HX	2.8	2.5	50	8
	DHTM3-6HXECP		M3	0.5	18	3.5x2.7 6HX	3.5	3	56	10
	DHTM4-6HXECP		M4	0.7	21	4.5x3.4 6HX	4.5	4	63	12
	DHTM5-6HXECP		M5	0.8	25	6x4.9 6HX	6	5	70	14
	DHTM6-6HXECP		M6	1.0	29	6x4.9 6HX	6	6	80	16
	DHTM8-6HXECP		M8	1.25	35	8x6.2 6HX	8	8	90	18
	DHTM10-6HXECP		M10	1.5	39	10x8 6HX	10	10	100	20
	DHTM12-6HXECP		M12	1.75	49	9x7 6HX	9	12	110	24
	DHTM14-6HXECP		M14	2.0	53	11x9 6HX	11	14	110	26
	DHTM16-6HXECP		M16	2.0	54	12x9 6HX	12	16	110	26
	DHTM18-6HXECP		M18	2.5	62	14x11 6HX	14	18	125	30
	DHTM20-6HXECP		M20	2.5	68	16x12 6HX	16	20	140	32
	DHTM3×0.35-6HXECP		M3x0.35	0.35	18	3.5x2.7 6HX	3.5	3	56	10
	DHTM4×0.5-6HXECP		M4x0.5	0.5	21	4.5x3.4 6HX	4.5	4	63	12
	DHTM5×0.5-6HXECP		M5x0.5	0.5	25	6x4.9 6HX	6	5	70	14
	DHTM6×0.5-6HXECP		M6x0.5	0.5	29	6x4.9 6HX	6	6	80	16
	DHTM6×0.75-6HXECP		M6x0.75	0.75	29	6x4.9 6HX	6	6	80	16
	DHTM8×0.75-6HXECP		M8x0.75	0.75	35	8x6.2 6HX	8	8	90	18
	DHTM8×1-6HXECP		M8x1	1.0	35	8x6.2 6HX	8	8	90	18
	DHTM10×1-6HXECP		M10x1	1.0	39	10x8 6HX	10	10	100	20
	DHTM10×1.25-6HXECP		M10x1.25	1.25	39	10x8 6HX	10	10	100	20
	DHTM12×1-6HXECP		M12x1	1.0	49	9x7 6HX	9	12	110	24
	DHTM12×1.25-6HXECP		M12x1.25	1.25	49	9x7 6HX	9	12	110	24
	DHTM12×1.5-6HXECP		M12x1.5	1.5	49	9x7 6HX	9	12	110	24
	DHTM14×1-6HXECP		M14x1	1.0	53	11x9 6HX	11	14	110	26
	DHTM14×1.25-6HXECP		M14x1.25	1.25	53	11x9 6HX	11	14	110	26
	DHTM14×1.5-6HXECP		M14x1.5	1.5	53	11x9 6HX	11	14	110	26
	DHTM16×1-6HXECP		M16x1	1.0	54	12x9 6HX	12	16	110	26
	DHTM16×1.5-6HXECP		M16x1.5	1.5	54	12x9 6HX	12	16	110	26
	DHTM18×1-6HXECP		M18x1	1.0	62	14x11 6HX	14	18	125	30
	DHTM18×1.5-6HXECP		M18x1.5	1.5	62	14x11 6HX	14	18	125	30
	DHTM18×2-6HXECP		M18x2	2.0	62	14x11 6HX	14	18	125	30
	DHTM20×1-6HXECP		M20x1	1.0	68	16x12 6HX	16	20	140	32
	DHTM20×1.5-6HXECP		M20x1.5	1.5	68	16x12 6HX	16	20	140	32
	DHTM20×2-6HXECP		M20x2	2.0	68	16x12 6HX	16	20	140	32

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic、Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB ≤ 252)

(HRC ≤ 40)

(40-50HRC) (5

0-55HRC)(&

gt; 55HRC)

涂层 Coated

★ ★

★★★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

挤压 Forming

DIN 德标通用挤压丝锥系列 C/2-3PDIN Standard General HSSE Forming Tap

型号 Model 涂层 Coated	库存 Śtock	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Śtock	TDZ	TP	LU CZCMS	TCTR	DCONMS	TD	LF	THL
DNRM3-6HXCCH		M3	0.5	18 3.5x2.7	6HX	3.5	3	56	5.5
DNRM4-6HXCCH		M4	0.7	21 4.5x3.4	6HX	4.5	4	63	7
DNRM5-6HXCCH		M5	0.8	25 6x4.9	6HX	6	5	70	8
DNRM6-6HXCCH		M6	1.0	29 6x4.9	6HX	6	6	80	10
	DNRM8-6HXCCH	M8	1.25	35 8x6.2	6HX	8	8	90	14
	DNRM10-6HXCCH	M10	1.5	39	10x8 6HX	10	10	100	16
	DNRM12-6HXCCH	M12	1.75	49	9x7 6HX	9	12	110	18.5
	DNRM14-6HXCCH	M14	2.0	53	11x9	6HX 11	14	110	20
	DNRM16-6HXCCH	M16	2.0	54	12x9	6HX	12 16	110	20
	DNRM18-6HXCCH	M18	2.5	62	14x11	6HX	14 18	125	25
	DNRM20-6HXCCH	M20	2.5	68	16x12	6HX	16 20	140	25
	DNRM3×0.35-6HXCCH	M3x0.35	0.35	18	3.5x2.7	6HX	3.5 3	56	5.5
	DNRM4×0.5-6HXCCH	M4x0.5	0.5	21	4.5x3.4	6HX	4.5 4	63	7
	DNRM5×0.5-6HXCCH	M5x0.5	0.5	25	6x4.9	6HX	6 5	70	8
	DNRM6×0.5-6HXCCH	M6x0.5	0.5	29	6x4.9	6HX	6 6	80	10
	DNRM6×0.75-6HXCCH	M6x0.75	0.75	29	6x4.9	6HX	6 6	80	10
	DNRM8×0.75-6HXCCH	M8x0.75	0.75	35	8x6.2	6HX	8 8	90	14
	DNRM8×1-6HXCCH	M8x1	1.0	35	8x6.2	6HX	8 8	90	14
	DNRM10×1-6HXCCH	M10x1	1.0	39	10x8	6HX	10 10	100	16
	DNRM10×1.25-6HXCCH	M10x1.25	1.25	39	10x8	6HX	10 10	100	16
	DNRM12×1-6HXCCH	M12x1	1.0	49	9x7	6HX	9 12	110	18.5
	DNRM12×1.25-6HXCCH	M12x1.25	1.25	49	9x7	6HX	9 12	110	18.5
	DNRM12×1.5-6HXCCH	M12x1.5	1.5	49	9x7	6HX	9 12	110	18.5
	DNRM14×1-6HXCCH	M14x1	1.0	53	11x9	6HX	11 14	110	20
	DNRM14×1.25-6HXCCH	M14x1.25	1.25	53	11x9	6HX	11 14	110	20
	DNRM14×1.5-6HXCCH	M14x1.5	1.5	53	11x9	6HX	11 14	110	20
	DNRM16×1-6HXCCH	M16x1	1.0	54	12x9	6HX	12 16	110	20
	DNRM16×1.5-6HXCCH	M16x1.5	1.5	54	12x9	6HX	12 16	110	20
	DNRM18×1-6HXCCH	M18x1	1.0	62	14x11	6HX	14 18	125	25
	DNRM18×1.5-6HXCCH	M18x1.5	1.5	62	14x11	6HX	14 18	125	25
	DNRM18×2-6HXCCH	M18x2	2.0	62	14x11	6HX	14 18	125	25
	DNRM20×1-6HXCCH	M20x1	1.0	68 68	16x12	6HX 6HX	16 20	140	25
	DNRM20×1.5-6HXCCH	M20x1.5	1.5		16x12		16 20	140	25
	DNRM20×2-6HXCCH	M20x2	2.0	68	16x12	6HX	16 20	140	25

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial	碳素钢低合金钢Carbon steelLow-alloy steel	合金钢调制钢Alloy steelTempered Alloy steel	高硬钢、淬硬刚High-hardnessHardened steel	铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic	铸铁Cast iron	铜合金Copperalloy	铝合金铸铝Aluminumalloy	石墨Graphite	钛合金Titaniumalloy	镍基合金Nickell-base alloy	塑料Plastic
	(HB≤252)	(HRC ≤ 40)	(40-50HRC) (50-55HRC)(> 55HRC)
涂层 Coated	★ ☆ ★★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

挤压 Forming

DIN 德标通用挤压丝锥系列 E/1.5-2PDIN Standard General HSSE Forming Tap

型号 Model 涂层 Coated		库存 Stock	尺寸 Dimension/mm
型号 Model 涂层 Coated		库存 Stock	TDZ TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
DNRM3-6HXECH			M3	0.5 18	3.5x2.7	6HX	3.5	3	56	5.5
	DNRM4-6HXECH		M4	0.7 21	4.5x3.4	6HX	4.5	4	63	7
	DNRM5-6HXECH		M5	0.8 25	6x4.9	6HX	6	5	70	8
	DNRM6-6HXECH		M6	1.0 29	6x4.9	6HX	6	6	80	10
	DNRM8-6HXECH		M8	1.25	35 8x6.2	6HX	8	8	90	14
	DNRM10-6HXECH		M10	1.5	39 10x8	6HX	10	10	100	16
	DNRM12-6HXECH		M12	1.75	49 9x7	6HX	9	12	110	18.5
	DNRM14-6HXECH		M14	2.0	53 11x9	6HX	11	14	110	20
	DNRM16-6HXECH		M16	2.0	54 12x9	6HX	12	16	110	20
	DNRM18-6HXECH		M18	2.5	62 14x11	6HX	14	18	125	25
	DNRM20-6HXECH		M20	2.5	68 16x12	6HX	16	20	140	25
	DNRM3×0.35-6HXECH		M3x0.35	0.35	18 3.5x2.7	6HX	3.5	3	56	5.5
	DNRM4×0.5-6HXECH		M4x0.5	0.5	21 4.5x3.4	6HX	4.5	4	63	7
	DNRM5×0.5-6HXECH		M5x0.5	0.5	25 6x4.9	6HX	6	5	70	8
	DNRM6×0.5-6HXECH		M6x0.5	0.5	29 6x4.9	6HX	6	6	80	10
	DNRM6×0.75-6HXECH		M6x0.75	0.75	29 6x4.9	6HX	6	6	80	10
	DNRM8×0.75-6HXECH		M8x0.75	0.75	35 8x6.2	6HX	8	8	90	14
	DNRM8×1-6HXECH		M8x1	1.0	35 8x6.2	6HX	8	8	90	14
	DNRM10×1-6HXECH		M10x1	1.0	39 10x8	6HX	10	10	100	16
	DNRM10×1.25-6HXECH		M10x1.25	1.25	39 10x8	6HX	10	10	100	16
	DNRM12×1-6HXECH		M12x1	1.0	49 9x7	6HX	9	12	110	18.5
	DNRM12×1.25-6HXECH		M12x1.25	1.25	49 9x7	6HX	9	12	110	18.5
	DNRM12×1.5-6HXECH		M12x1.5	1.5	49 9x7	6HX	9	12	110	18.5
	DNRM14×1-6HXECH		M14x1	1.0	53 11x9	6HX	11	14	110	20
	DNRM14×1.25-6HXECH		M14x1.25	1.25	53 11x9	6HX	11	14	110	20
	DNRM14×1.5-6HXECH		M14x1.5	1.5	53 11x9	6HX	11	14	110	20
	DNRM16×1-6HXECH		M16x1	1.0	54 12x9	6HX	12	16	110	20
	DNRM16×1.5-6HXECH		M16x1.5	1.5	54 12x9	6HX	12	16	110	20
	DNRM18×1-6HXECH		M18x1	1.0	62 14x11	6HX	14	18	125	25
	DNRM18×1.5-6HXECH		M18x1.5	1.5	62 14x11 62	6HX	14	18	125	25
	DNRM18×2-6HXECH		M18x2	2.0 1.0	14x11 68 16x12	6HX 6HX	14 16	18 20	125	25
	DNRM20×1-6HXECH		M20x1	1.5	68 16x12	6HX	16	20	140	25
	DNRM20×1.5-6HXECH		M20x1.5		68 16x12	6HX	16	20	140	25
	DNRM20×2-6HXECH		M20x2	2.0					140	25

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloybase

镍基合金Nickell-alloy

塑料Plastic

(HB≤ 252) (

HRC ≤ 40)

(40-50HRC) (

50-55HRC)(> 55HRC)

涂层 Coated

★

☆ ★ ★★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

挤压 Forming

DIN 德标高性能挤压丝锥系列 C/2-3P

DIN Standard High-Performance HSSE-PM Forming Tap

型号 Model 涂层 Coated	库存 Śtock	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Śtock	TDZ TP	LU		CZCMS TCTR	DCONMS	TD	LF	THL
DNRM2-6HXCCP		M2	0.4	13	2.8x2.1 6HX	2.8	2	45	4.5
DNRM2.5-6HXCCP		M2.5	0.45	14	2.8x2.1 6HX	2.8	2.5	50	5
DNRM3-6HXCCP		M3	0.5	18	3.5x2.7 6HX	3.5	3	56	5.5
DNRM4-6HXCCP		M4	0.7	21	4.5x3.4 6HX	4.5	4	63	7
	DNRM5-6HXCCP	M5	0.8	25	6x4.9 6HX	6	5	70	8
	DNRM6-6HXCCP	M6	1.0	29	6x4.9 6HX	6	6	80	10
	DNRM8-6HXCCP	M8	1.25	35	8x6.2 6HX	8	8	90	14
	DNRM10-6HXCCP	M10	1.5	39	10x8 6HX	10	10	100	16
	DNRM12-6HXCCP	M12	1.75	49	9x7 6HX	9	12	110	18.5
	DNRM14-6HXCCP	M14	2.0	53	11x9 6HX	11	14	110	20
	DNRM16-6HXCCP	M16	2.0	54	12x9 6HX	12	16	110	20
	DNRM18-6HXCCP	M18	2.5	62	14x11 6HX	14	18	125	25
	DNRM20-6HXCCP	M20	2.5	68	16x12 6HX	16	20	140	25
	DNRM3×0.35-6HXCCP	M3x0.35	0.35	18	3.5x2.7 6HX	3.5	3	56	5.5
	DNRM4×0.5-6HXCCP	M4x0.5	0.5	21	4.5x3.4 6HX	4.5	4	63	7
	DNRM5×0.5-6HXCCP	M5x0.5	0.5	25	6x4.9 6HX	6	5	70	8
	DNRM6×0.5-6HXCCP	M6x0.5	0.5	29	6x4.9 6HX	6	6	80	10
	DNRM6×0.75-6HXCCP	M6x0.75	0.75	29	6x4.9 6HX	6	6	80	10
	DNRM8×0.75-6HXCCP	M8x0.75	0.75	35	8x6.2 6HX	8	8	90	14
	DNRM8×1-6HXCCP	M8x1	1.0	35	8x6.2 6HX	8	8	90	14
	DNRM10×1-6HXCCP	M10x1	1.0	39	10x8 6HX	10	10	100	16
	DNRM10×1.25-6HXCCP	M10x1.25	1.25	39	10x8 6HX	10	10	100	16
	DNRM12×1-6HXCCP	M12x1	1.0	49	9x7 6HX	9	12	110	18.5
	DNRM12×1.25-6HXCCP	M12x1.25	1.25	49	9x7 6HX	9	12	110	18.5
	DNRM12×1.5-6HXCCP	M12x1.5	1.5 1.0	49	9x7 6HX	9 11	12	110	18.5
	DNRM14×1-6HXCCP	M14x1		53 53	11x9 6HX 11x9	11	14	110	20
	DNRM14×1.25-6HXCCP	M14x1.25	1.25 1.5	53	6HX 11x9 6HX	11	14 14	110	20
	DNRM14×1.5-6HXCCP DNRM16×1-6HXCCP	M14x1.5 M16x1	1.0	54	6HX	12	16	110	20
			1.5	54	12x9 12x9 6HX	12	16	110	20
	DNRM16×1.5-6HXCCP DNRM18×1-6HXCCP	M16x1.5	1.0	62	14x11 6HX	14	18	110	20
		M18x1 M18x1.5	1.5	62	14x11 6HX	14	18	125	25
	DNRM18×1.5-6HXCCP		2.0	62	14x11 6HX	14	18	125	25
	DNRM18×2-6HXCCP	M18x2	1.0	68	16x12 6HX	16	20	125 140	25
	DNRM20×1-6HXCCP	M20x1	1.5	68	16x12 6HX	16	20	140	25
	DNRM20×1.5-6HXCCP	M20x1.5		68	16x12 6HX	16	20		25
	DNRM20×2-6HXCCP	M20x2	2.0					140	25

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

挤压 Forming

DIN 德标高性能挤压丝锥系列 E/1.5-2PDIN Standard High-Performance HSSE-PM Forming Tap

型号 Model 涂层 Coated	库存 Śtock	TDZ	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Śtock	TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
DNRM2-6HXECP			M2	0.4	13 2.8x2.1	6HX	2.8	2	45	4.5
DNRM2.5-6HXECP			M2.5	0.45	14 2.8x2.1	6HX	2.8	2.5	50	5
DNRM3-6HXECP			M3	0.5	18 3.5x2.7	6HX	3.5	3	56	5.5
	DNRM4-6HXECP		M4	0.7	21 4.5x3.4	6HX	4.5	4	63	7
	DNRM5-6HXECP		M5	0.8	25	6x4.9 6HX	6	5	70	8
	DNRM6-6HXECP		M6	1.0	29	6x4.9 6HX	6	6	80	10
	DNRM8-6HXECP		M8	1.25	35	8x6.2 6HX	8	8	90	14
	DNRM10-6HXECP		M10	1.5	39	10x8 6HX	10	10	100	16
	DNRM12-6HXECP		M12	1.75	49	9x7 6HX	9	12	110	18.5
	DNRM14-6HXECP		M14	2.0	53	11x9 6HX	11	14	110	20
	DNRM16-6HXECP		M16	2.0	54	12x9 6HX	12	16	110	20
	DNRM18-6HXECP		M18	2.5	62	14x11 6HX	14	18	125	25
	DNRM20-6HXECP		M20	2.5	68	16x12 6HX	16	20	140	25
	DNRM3×0.35-6HXECP		M3x0.35	0.35	18	3.5x2.7 6HX	3.5	3	56	5.5
	DNRM4×0.5-6HXECP		M4x0.5	0.5	21	4.5x3.4 6HX	4.5	4	63	7
	DNRM5×0.5-6HXECP		M5x0.5	0.5	25	6x4.9 6HX	6	5	70	8
	DNRM6×0.5-6HXECP		M6x0.5	0.5	29	6x4.9 6HX	6	6	80	10
	DNRM6×0.75-6HXECP		M6x0.75	0.75	29	6x4.9 6HX	6	6	80	10
	DNRM8×0.75-6HXECP		M8x0.75	0.75	35	8x6.2 6HX	8	8	90	14
	DNRM8×1-6HXECP		M8x1	1.0	35	8x6.2 6HX	8	8	90	14
	DNRM10×1-6HXECP		M10x1	1.0	39	10x8 6HX	10	10	100	16
	DNRM10×1.25-6HXECP		M10x1.25	1.25	39	10x8 6HX	10	10	100	16
	DNRM12×1-6HXECP		M12x1	1.0	49	9x7 6HX	9	12	110	18.5
	DNRM12×1.25-6HXECP		M12x1.25	1.25 1.5	49	9x7 6HX	9	12	110	18.5
	DNRM12×1.5-6HXECP		M12x1.5	1.0	49	9x7 6HX	9	12	110	18.5
	DNRM14×1-6HXECP		M14x1 M14x1.25	1.25	53 53	11x9 6HX 11x9	11 11	14	110	20
	DNRM14×1.25-6HXECP		M14x1.5	1.5		6HX 11x9 6HX	11	14 14	110	20
	DNRM14×1.5-6HXECP DNRM16×1-6HXECP		M16x1	1.0	53 54	6HX	12		110	20
				1.5		12x9 6HX		16	110	20
	DNRM16×1.5-6HXECP		M16x1.5	1.0	54	12x9	12	16	110	20
	DNRM18×1-6HXECP		M18x1 M18x1.5	1.5	62 62	14x11 6HX 14x11 6HX	14 14	18 18	125	25
	DNRM18×1.5-6HXECP			2.0	62	14x11 6HX	14	18	125	25
	DNRM18×2-6HXECP		M18x2	1.0	68	16x12 6HX	16		125	25
	DNRM20×1-6HXECP		M20x1	1.5	68	16x12 6HX	16	20 20	140 140	25
	DNRM20×1.5-6HXECP		M20x1.5		68	16x12 6HX				25
	DNRM20×2-6HXECP		M20x2	2.0			16	20	140	25

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料 Workpiece material	碳素钢低合金钢 Carbon steel Low-alloy steel	合金钢调制钢 Alloy steel		高硬钢、淬硬刚 High-hardness Hardened steel	铁素体、马氏体奥氏体不锈钢 Femitic、 Martensitic,	铸铁 Cast iron	铜合金 Copper	铝合金铸铝	石墨	钛合金 Titanium	镍基合金塑料
加工材料 Workpiece material	(HB≤252)	Tempered Alloy steel (HRC ≤ 40)	(40-50HRC)	(50-55HRC)(> 55HRC)	Austenitic		alloy	Aluminum alloy	Graphite	alloy	Nickell- Plastic base alloy
涂层 Coated	★	★			★		★	★

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

螺旋槽 Spiral FluteJIS 日标通用丝锥系列 C/2-3PJIS Standard General HSSE Tap

型号 Model		库存 Stock	尺寸 Dimension/mm
无涂层 Uncoated	涂层 Coated	库存 Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS TD	LF	THL
JSAM2-6HCWH	JSAM2-6HCCH		M2	0.4	16	3x2.5	6H	3 2	40	4
JSAM2.5-6HCWH	JSAM2.5-6HCCH		M2.5	0.45	16	3x2.5 6H	3	2.5	44	5
JSAM3-6HCWH	JSAM3-6HCCH		M3	0.5	19	4x3.2 6H	4	3	46	5.5
JSAM4-6HCWH	JSAM4-6HCCH		M4	0.7	21	5x4 6H	5	4	52	7.7
JSAM5-6HCWH	JSAM5-6HCCH		M5	0.8	24	5.5x4.5	6H 5.5	5	60	8.8
JSAM6-6HCWH	JSAM6-6HCCH		M6	1.0	29	6x4.5	6H 6	6	62	11
JSAM8-6HCWH	JSAM8-6HCCH		M8	1.25	37	6.2x5	6H 6.2	8	70	13.5
JSAM10-6HCWH	JSAM10-6HCCH		M10	1.5	41	7x5.5	6H 7	10	75	16.5
JSAM12-6HCWH	JSAM12-6HCCH		M12	1.75	48	8.5x6.5	6H 8.5	12	82	19.5
JSAM14-6HCWH	JSAM14-6HCCH		M14	2.0	48	10.5x8	6H	10.5 14	88	22
JSAM16-6HCWH	JSAM16-6HCCH		M16	2.0	52	12.5x10	6H	12.5 16	95	22
JSAM18-6HCWH	JSAM18-6HCCH		M18	2.5	55	14x11	6H	14 18	100	27.5
JSAM20-6HCWH	JSAM20-6HCCH		M20	2.5	58	15x12	6H	15 20	105	27.5
JSAM3×0.35-6HCWH	JSAM3×0.35-6HCCH		M3x0.35	0.35	19	4x3.2	6H	4 3	46	5.5
JSAM4×0.5-6HCWH	JSAM4×0.5-6HCCH		M4x0.5	0.5	21	5x4	6H	5 4	52	7.7
JSAM5×0.5-6HCWH	JSAM5×0.5-6HCCH		M5x0.5	0.5	24	5.5x4.5	6H	5.5 5	60	8.8
JSAM6×0.5-6HCWH	JSAM6×0.5-6HCCH		M6x0.5	0.5	29	6x4.5	6H	6 6	62	11
JSAM6×0.75-6HCWH	JSAM6×0.75-6HCCH		M6x0.75	0.75	29	6x4.5	6H	6 6	62	11
JSAM8×0.75-6HCWH	JSAM8×0.75-6HCCH		M8x0.75	0.75	37	6.2x5	6H	6.2	8 70	13.5
JSAM8×1-6HCWH	JSAM8×1-6HCCH		M8x1	1.0	37	6.2x5	6H	6.2	8 70	13.5
JSAM10×1-6HCWH	JSAM10×1-6HCCH		M10x1	1.0	41	7x5.5	6H	7	10 75	16.5
JSAM10×1.25-6HCWH	JSAM10×1.25-6HCCH		M10x1.25	1.25	41	7x5.5	6H	7	10 75	16.5
JSAM12×1-6HCWH	JSAM12×1-6HCCH		M12x1	1.0	48	8.5x6.5	6H	8.5	12 82	19.5
JSAM12×1.25-6HCWH	JSAM12×1.25-6HCCH		M12x1.25	1.25	48	8.5x6.5	6H	8.5	12 82	19.5
JSAM12×1.5-6HCWH	JSAM12×1.5-6HCCH		M12x1.5	1.5	48	8.5x6.5	6H	8.5	12 82	19.5
JSAM14×1-6HCWH	JSAM14×1-6HCCH		M14x1	1.0	48	10.5x8	6H	10.5	14 88	22
JSAM14×1.25-6HCWH	JSAM14×1.25-6HCCH		M14x1.25	1.25	48	10.5x8	6H	10.5	14 88	22
JSAM14×1.5-6HCWH	JSAM14×1.5-6HCCH		M14x1.5	1.5	48	10.5x8	6H	10.5	14 88	22
JSAM16×1-6HCWH	JSAM16×1-6HCCH		M16x1	1.0	52	12.5x10	6H	12.5	16 95	22
JSAM16×1.5-6HCWH	JSAM16×1.5-6HCCH		M16x1.5	1.5	52	12.5x10	6H	12.5	16 95	22
JSAM18×1-6HCWH	JSAM18×1-6HCCH		M18x1	1.0	55	14x11	6H	14	18 100	27.5
JSAM18×1.5-6HCWH	JSAM18×1.5-6HCCH		M18x1.5	1.5 2.0	55	14x11	6H	14	18 100	27.5
JSAM18×2-6HCWH	JSAM18×2-6HCCH		M18x2		55 58	14x11 15x12	6H	14	18 100	27.5
JSAM20×1-6HCWH	JSAM20×1-6HCCH		M20x1	1.0	58	15x12	6H 6H	15	20 105	27.5
JSAM20×1.5-6HCWH	JSAM20×1.5-6HCCH		M20x1.5	1.5				15	20 105	27.5
JSAM20×2-6HCWH	JSAM20×2-6HCCH		M20x2	2.0	58	15x12	6H	15	20 105	27.5

●标准库存 ○订单生产
Cutting material recommendation

切削材料推荐

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC≤40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

无涂层 Uncoated

☆

涂层 Coated

★

☆

★

☆

Cutting material recommendation

螺尖 Spiral Point

JIS 日标通用丝锥系列 B/3.5-5.5PJIS Standard General HSSE Tap

B TP 3.5-5.5P

型号 Model			库存	尺寸 Dimension/mm
无涂层 Uncoated	涂层 Coated	Stock TDZ	库存	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
JPOM2-6HXBWH	JPOM2-6HXBCH		M2	0.4	16	3x2.5	6HX	3	2	40	6
JPOM2.5-6HXBWH	JPOM2.5-6HXBCH		M2.5	0.45	16	3x2.5	6HX	3	2.5	44	6.5
JPOM3-6HXBWH	JPOM3-6HXBCH		M3	0.5	19	4x3.2	6HX	4	3	46	7.5
JPOM4-6HXBWH	JPOM4-6HXBCH		M4	0.7	21	5x4	6HX	5	4	52	10.5
JPOM5-6HXBWH	JPOM5-6HXBCH		M5	0.8	24	5.5x4.5	6HX	5.5	5	60	12
JPOM6-6HXBWH	JPOM6-6HXBCH		M6	1.0	29	6x4.5	6HX	6	6	62	15
JPOM8-6HXBWH	JPOM8-6HXBCH		M8	1.25	37	6.2x5	6HX	6.2	8	70	18.8
JPOM10-6HXBWH	JPOM10-6HXBCH		M10	1.5	41	7x5.5	6HX	7	10	75	22.5
JPOM12-6HXBWH	JPOM12-6HXBCH		M12	1.75	48	8.5x6.5	6HX	8.5	12	82	26.3
JPOM14-6HXBWH	JPOM14-6HXBCH		M14	2.0	48	10.5x8	6HX	10.5	14	88	30
JPOM16-6HXBWH	JPOM16-6HXBCH		M16	2.0	52	12.5x10	6HX	12.5	16	95	30
JPOM18-6HXBWH	JPOM18-6HXBCH		M18	2.5	55	14x11	6HX	14	18	100	37.5
JPOM20-6HXBWH	JPOM20-6HXBCH		M20	2.5	58	15x12	6HX	15	20	105	37.5
JPOM3×0.35-6HXBWH	JPOM3×0.35-6HXBCH		M3x0.35	0.35	19	4x3.2	6HX	4	3	46	7.5
JPOM4×0.5-6HXBWH	JPOM4×0.5-6HXBCH		M4x0.5	0.5	21	5x4	6HX	5	4	52	10.5
JPOM5×0.5-6HXBWH	JPOM5×0.5-6HXBCH		M5x0.5	0.5	24	5.5x4.5	6HX	5.5	5	60	12
JPOM6×0.5-6HXBWH	JPOM6×0.5-6HXBCH		M6x0.5	0.5	29	6x4.5	6HX	6	6	62	15
JPOM6×0.75-6HXBWH	JPOM6×0.75-6HXBCH		M6x0.75	0.75	29	6x4.5	6HX	6	6	62	15
JPOM8×0.75-6HXBWH	JPOM8×0.75-6HXBCH		M8x0.75	0.75	37	6.2x5	6HX	6.2	8	70	18.8
JPOM8×1-6HXBWH	JPOM8×1-6HXBCH		M8x1	1.0	37	6.2x5	6HX	6.2	8	70	18.8
JPOM10×1-6HXBWH	JPOM10×1-6HXBCH		M10x1	1.0	41 41	7x5.5 7x5.5	6HX	7 7	10	75	22.5
JPOM10×1.25-6HXBWH	JPOM10×1.25-6HXBCH JPOM12×1-6HXBCH		M10x1.25	1.25 1.0	48	8.5x6.5	6HX 6HX		10	75	22.5
JPOM12×1-6HXBWH	JPOM12×1.25-6HXBCH		M12x1	1.25	48	8.5x6.5	6HX	8.5 8.5	12 12	82	26.3
JPOM12×1.25-6HXBWH	JPOM12×1.5-6HXBCH		M12x1.25 M12x1.5	1.5	48	8.5x6.5	6HX	8.5	12	82	26.3
JPOM12×1.5-6HXBWH	JPOM14×1-6HXBCH		M14x1	1.0	48	10.5x8	6HX	10.5	14	82	26.3
JPOM14×1-6HXBWH	JPOM14×1.25-6HXBCH		M14x1.25	1.25	48	10.5x8	6HX	10.5	14	88	30
JPOM14×1.25-6HXBWH	JPOM14×1.5-6HXBCH		M14x1.5	1.5	48	10.5x8	6HX	10.5	14	88 88	30
JPOM14×1.5-6HXBWH	JPOM16×1-6HXBCH		M16x1	1.0	52	12.5x10	6HX	12.5	16	95	30
JPOM16×1-6HXBWH	JPOM16×1.5-6HXBCH		M16x1.5	1.5	52	12.5x10	6HX	12.5	16	95	30
JPOM16×1.5-6HXBWH	JPOM18×1-6HXBCH		M18x1	1.0	55	14x11	6HX	14	18	100	30
JPOM18×1-6HXBWH	JPOM18×1.5-6HXBCH		M18x1.5	1.5	55	14x11	6HX	14	18	100	37.5
JPOM18×1.5-6HXBWH JPOM18×2-6HXBWH	JPOM18×2-6HXBCH		M18x2	2.0	55	14x11	6HX	14	18	100	37.5 37.5
JPOM20×1-6HXBWH	JPOM20×1-6HXBCH		M20x1	1.0	58	15x12	6HX	15	20	105	37.5
JPOM20×1.5-6HXBWH	JPOM20×1.5-6HXBCH	JPOM20×2-6HXBCH	M20x1.5	1.5 M20x2 2.0	58 58	15x12 15x12	6HX 6HX	15 15	20 20

●标准库存 ○订单生产

切削材料推荐

加工材料Workpiecematerial	碳素钢低合金钢Carbon steelLow-alloy steel	合金钢调制钢Alloy steelTempered Alloy stee	高硬钢、淬硬刚High-hardnessHardened steel	铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic	铸铁Cast iron	铜合金Copperalloy	铝合金铸铝Aluminumalloy	石墨Graphite	钛合金Titaniumalloy	镍基合金Nickell-base alloy	塑料Plastic
	(HB≤ 252)	(HRC ≤40)	(40-50HRC)(50-55HRC)(> 55HRC)
无涂层 Uncoated	☆	☆		☆	☆☆☆
涂层 Coated	★ ★ ★ ☆★★ ☆☆

直槽 Straight FluteJIS 日标通用丝锥系列 C/2-3PJIS Standard General HSSE Tap

型号 Model		库存 Śtock	尺寸 Dimension/mm
无涂层 Uncoated	涂层 Coated	库存 Śtock	TDZ	TP	LU	CZCMS	TCTR DCONMS	TD	LF	THL
JHTM2-6HXCWH	JHTM2-6HXCCH	O	M2	0.4	16	3x2.5 6HX	3	2	40	6
JHTM2.5-6HXCWH	JHTM2.5-6HXCCH	O	M2.5	0.45	16	3x2.5 6HX	3	2.5	44	6.5
JHTM3-6HXCWH	JHTM3-6HXCCH		M3	0.5	19	4x3.2 6HX	4	3	46	7.5
JHTM4-6HXCWH	JHTM4-6HXCCH		M4	0.7	21	5x4 6HX	5	4	52	10.5
JHTM5-6HXCWH	JHTM5-6HXCCH		M5	0.8	24	5.5x4.5 6HX	5.5	5	60	12
JHTM6-6HXCWH	JHTM6-6HXCCH		M6	1.0	29	6x4.5 6HX	6	6	62	15
JHTM8-6HXCWH	JHTM8-6HXCCH		M8	1.25	37	6.2x5 6HX	6.2	8	70	18.8
JHTM10-6HXCWH	JHTM10-6HXCCH		M10	1.5	41	7x5.5 6HX	7	10	75	22.5
JHTM12-6HXCWH	JHTM12-6HXCCH		M12	1.75	48	8.5x6.5 6HX	8.5	12	82	26.3
JHTM14-6HXCWH	JHTM14-6HXCCH		M14	2.0	48	10.5x8 6HX	10.5	14	88	30
JHTM16-6HXCWH	JHTM16-6HXCCH		M16	2.0	52	12.5x10 6HX	12.5	16	95	30
JHTM18-6HXCWH	JHTM18-6HXCCH	O	M18	2.5	55	14x11 6HX	14	18	100	37.5
JHTM20-6HXCWH	JHTM20-6HXCCH	O	M20	2.5	58	15x12 6HX	15	20	105	37.5
JHTM3×0.35-6HXCWH	JHTM3×0.35-6HXCCH	O	M3x0.35	0.35	19	4x3.2 6HX	4	3	46	7.5
JHTM4×0.5-6HXCWH	JHTM4×0.5-6HXCCH	O	M4x0.5	0.5	21	5x4 6HX	5	4	52	10.5
JHTM5×0.5-6HXCWH	JHTM5×0.5-6HXCCH	O	M5x0.5	0.5	24	5.5x4.5 6HX	5.5	5	60	12
JHTM6×0.5-6HXCWH	JHTM6×0.5-6HXCCH	O	M6x0.5	0.5	29	6x4.5 6HX	6	6	62	15
JHTM6×0.75-6HXCWH	JHTM6×0.75-6HXCCH	O	M6x0.75	0.75	29	6x4.5 6HX	6	6	62	15
JHTM8×0.75-6HXCWH	JHTM8×0.75-6HXCCH	O	M8x0.75	0.75	37	6.2x5 6HX	6.2	8	70	18.8
JHTM8×1-6HXCWH	JHTM8×1-6HXCCH		M8x1	1.0	37	6.2x5 6HX	6.2	8	70	18.8
JHTM10×1-6HXCWH	JHTM10×1-6HXCCH	O	M10x1	1.0	41	7x5.5 6HX	7	10	75	22.5
JHTM10×1.25-6HXCWH	JHTM10×1.25-6HXCCH		M10x1.25	1.25	41	7x5.5 6HX	7	10	75	22.5
JHTM12×1-6HXCWH	JHTM12×1-6HXCCH		M12x1	1.0	48	8.5x6.5 6HX	8.5	12	82	26.3
JHTM12×1.25-6HXCWH	JHTM12×1.25-6HXCCH		M12x1.25	1.25	48	8.5x6.5 6HX	8.5	12	82	26.3
JHTM12×1.5-6HXCWH	JHTM12×1.5-6HXCCH		M12x1.5	1.5	48	8.5x6.5 6HX	8.5	12	82	26.3
JHTM14×1-6HXCWH	JHTM14×1-6HXCCH	O	M14x1	1.0	48	10.5x8 6HX	10.5	14	88	30
JHTM14×1.25-6HXCWH	JHTM14×1.25-6HXCCH	O	M14x1.25	1.25	48	10.5x8 6HX	10.5	14	88	30
JHTM14×1.5-6HXCWH	JHTM14×1.5-6HXCCH		M14x1.5	1.5	48	10.5x8 6HX	10.5	14	88	30
JHTM16×1-6HXCWH	JHTM16×1-6HXCCH	O	M16x1	1.0	52	12.5x10 6HX	12.5	16	95	30
JHTM16×1.5-6HXCWH	JHTM16×1.5-6XCCH		M16x1.5	1.5	52	12.5x10 6HX	12.5	16	95	30
JHTM18×1-6HXCWH	JHTM18×1-6HXCCH	O	M18x1	1.0	55	14x11 6HX 14x11 6HX	14	18	100	37.5
JHTM18×1.5-6HXCWH	JHTM18×1.5-6HXCCH	O	M18x1.5	1.5	55		14	18	100	37.5
JHTM18×2-6HXCWH	JHTM18×2-6HXCCH	O	M18x2	2.0	55	14x11 6HX	14	18	100	37.5
JHTM20×1-6HXCWH	JHTM20×1-6HXCCH	O	M20x1	1.0	58	15x12 6HX	15	20	105	37.5
JHTM20×1.5-6HXCWH	JHTM20×1.5-6HXCCH	O	M20x1.5	1.5	58	15x12 6HX 15x12 6HX	15 15	20	105	37.5
JHTM20×2-6HXCWH	JHTM20×2-6HXCCH	O	M20x2	2.0	58			20	105	37.5

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic,Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)( > 55HRC)

无涂层 Uncoated

☆ ☆☆★ ★ ☆ ☆ ☆☆

涂层 Coated

＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。
＊ For specific material,please refer to C216 for further information.

直槽 Straight FluteJIS 日标通用丝锥系列 E/1.5-2PJIS Standard General HSSE Tap

型号库存 Model				尺寸 Dimension/mm
无涂层 Uncoated	涂层 Coated	Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
JHTM2-6HXEWH	JHTM2-6HXECH			M2 0.4	16	3x2.5	6HX	3	2	40	6
JHTM2.5-6HXEWH	JHTM2.5-6HXECH		M2.5	0.45	16	3x2.5	6HX	3	2.5	44	6.5
JHTM3-6HXEWH	JHTM3-6HXECH		M3	0.5	19	4x3.2	6HX	4	3	46	7.5
JHTM4-6HXEWH	JHTM4-6HXECH		M4	0.7	21	5x4	6HX	5	4	52	10.5
JHTM5-6HXEWH	JHTM5-6HXECH		M5	0.8	24	5.5x4.5	6HX	5.5	5	60	12
JHTM6-6HXEWH	JHTM6-6HXECH		M6	1.0	29	6x4.5	6HX	6	6	62	15
JHTM8-6HXEWH	JHTM8-6HXECH		M8	1.25	37	6.2x5	6HX	6.2	8	70	18.8
JHTM10-6HXEWH	JHTM10-6HXECH		M10	1.5	41	7x5.5	6HX	7	10	75	22.5
JHTM12-6HXEWH	JHTM12-6HXECH		M12	1.75	48	8.5x6.5	6HX	8.5	12	82	26.3
JHTM14-6HXEWH	JHTM14-6HXECH		M14	2.0	48	10.5x8	6HX	10.5	14	88	30
JHTM16-6HXEWH	JHTM16-6HXECH		M16	2.0	52	12.5x10	6HX	12.5	16	95	30
JHTM18-6HXEWH	JHTM18-6HXECH		M18	2.5	55	14x11	6HX	14	18	100	37.5
JHTM20-6HXEWH	JHTM20-6HXECH		M20	2.5	58	15x12	6HX	15	20	105	37.5
JHTM3×0.35-6HXEWH	JHTM3×0.35-6HXECH		M3x0.35	0.35	19	4x3.2	6HX	4	3	46	7.5
JHTM4×0.5-6HXEWH	JHTM4×0.5-6HXEH		M4x0.5	0.5	21	5x4	6HX	5	4	52	10.5
JHTM5×0.5-6HXEWH	JHTM5×0.5-6HXECH		M5x0.5	0.5	24	5.5x4.5	6HX	5.5	5	60	12
JHTM6×0.5-6HXEWH	JHTM6×0.5-6HXECH		M6x0.5	0.5	29	6x4.5	6HX	6	6	62	15
JHTM6×0.75-6HXEWH	JHTM6×0.75-6HXECH		M6x0.75	0.75	29	6x4.5	6HX	6	6	62	15
JHTM8×0.75-6HXEWH	JHTM8×0.75-6HXECH		M8x0.75	0.75 1.0	37 37	6.2x5	6HX	6.2	8	70	18.8
JHTM8×1-6HXEWH	JHTM8×1-6HXECH		M8x1	1.0	41	6.2x5	6HX 6HX	6.2	8	70	18.8
JHTM10×1-6HXEWH	JHTM10×1-6HXECH	JHTM10×1.25-6HXECH	M10x1	M10x1.25 1.25	41	7x5.5 7x5.5	6HX	7 7	10 10	75	22.5
JHTM10×1.25-6HXEWH				M12x1 1.0	48	8.5x6.5	6HX	8.5	12	75	22.5
JHTM12×1-6HXEWH	JHTM12×1-6HXECH	JHTM12×1.25-6HXECH		M12x1.25 1.25	48	8.5x6.5	6HX	8.5	12	82	26.3
JHTM12×1.25-6HXEWH	JHTM12×1.5-6HXECH			M12x1.5 1.5	48	8.5x6.5	6HX	8.5	12	82	26.3
JHTM12×1.5-6HXEWH	JHTM14×1-6HXECH			M14x1 1.0	48	10.5x8	6HX	10.5	14	82	26.3
JHTM14×1-6HXEWH		JHTM14×1.25-6HXECH		M14x1.25 1.25	48	10.5x8	6HX	10.5	14	88	30
JHTM14×1.25-6HXEWH		JHTM14×1.5-6HXECH		M14x1.5 1.5	48	10.5x8	6HX	10.5	14	88 88	30
JHTM14×1.5-6HXEWH JHTM16×1-6HXEWH	JHTM16×1-6HXECH			M16x1 1.0	52	12.5x10	6HX	12.5	16	95	30
	JHTM16×1.5-6HXECH			M16x1.5 1.5	52	12.5x10	6HX	12.5	16	95	30 30
JHTM16×1.5-6HXEWH JHTM18×1-6HXEWH	JHTM18×1-6HXECH		M18x1	1.0	55	14x11	6HX	14	18	100
	JHTM18×1.5-6HXECH		M18x1.5	1.5	55	14x11	6HX	14	18	100	37.5 37.5
JHTM18×1.5-6HXEWH	JHTM18×2-6HXECH			M18x2 2.0	55	14x11	6HX	14	18	100	37.5
JHTM18×2-6HXEWH JHTM20×1-6HXEWH	JHTM20×1-6XECH			M20x1 1.0	58	15x12	6HX	15	20	105	37.5
JHTM20×1.5-6HXEWH		JHTM20×1.5-6HXECH JHTM20×2-6HXECH		M20x1.5 1.5 M20x2 2.0	58 58	15x12 15x12	6HX 6HX	15 15	20 20	105	37.5

●标准库存 ○订单生产

切削材料推荐 Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC ≤40)

(40-50HRC)

(50-55HRC)(> 55HRC)

无涂层 Uncoated

☆

☆☆☆

涂层 Coated

★

☆

☆ ☆☆

★首选 First choice ☆可选 Good choice

螺旋槽 Spiral Flute

JIS 日标高性能丝锥系列 C/2-3PJIS Standard High-Performance HSSE-PM Tap

切削材料推荐 Cutting material recommendation

型号 Model 涂层 Coated	库存 Stock		尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Stock		TDZ	TP	LU	CZCMS	TCTR	DCONMS TD	LF	THL
JSAM2-6HCCP		M2	0.4	16	3x2.5	6H	3	2	40	4
JSAM2.5-6HCCP		M2.5	0.45	16	3x2.5	6H	3	2.5	44	5
JSAM3-6HCCP		M3	0.5	19	4x3.2	6H	4	3	46	5.5
JSAM4-6HCCP		M4	0.7	21	5x4	6H	5	4	52	7.7
JSAM5-6HCCP		M5	0.8	24	5.5x4.5	6H	5.5	5	60	8.8
JSAM6-6HCCP		M6	1.0	29	6x4.5	6H	6	6	62	11
JSAM8-6HCCP		M8	1.25	37	6.2x5	6H	6.2	8	70	13.5
JSAM10-6HCCP		M10	1.5	41	7x5.5	6H	7	10	75	16.5
JSAM12-6HCCP		M12	1.75	48	8.5x6.5	6H	8.5	12	82	19.5
JSAM14-6HCCP		M14	2.0	48	10.5x8	6H	10.5	14	88	22
JSAM16-6HCCP		M16	2.0	52	12.5x10	6H	12.5	16	95	22
JSAM18-6HCCP		M18	2.5	55	14x11	6H	14	18	100	27.5
JSAM20-6HCCP		M20	2.5	58	15x12	6H	15	20	105	27.5
JSAM3×0.35-6HCCP		M3x0.35	0.35	19	4x3.2	6H	4	3	46	5.5
JSAM4×0.5-6HCCP		M4x0.5	0.5	21	5x4	6H		5 4	52	7.7
	JSAM5×0.5-6HCCP	M5x0.5	0.5	24	5.5x4.5	6H		5.5 5	60	8.8
	JSAM6×0.5-6HCCP	M6x0.5	0.5	29	6x4.5		6H	6 6	62	11
JSAM6×0.75-6HCCP		M6x0.75	0.75	29	6x4.5	6H		6 6	62	11
JSAM8×0.75-6HCCP		M8x0.75	0.75	37	6.2x5	6H		6.2 8	70	13.5
	JSAM8×1-6HCCP		M8x1 1.0	37	6.2x5		6H	6.2 8	70	13.5
	JSAM10×1-6HCCP		M10x1 1.0	41	7x5.5		6H	7 10	75	16.5
	JSAM10×1.25-6HCCP		M10x1.25 1.25	41	7x5.5		6H	7 10	75	16.5
	JSAM12×1-6HCCP		M12x1 1.0	48	8.5x6.5		6H	8.5 12	82	19.5
	JSAM12×1.25-6HCCP		M12x1.25 1.25	48	8.5x6.5		6H	8.5 12	82	19.5
	JSAM12×1.5-6HCCP		M12x1.5 1.5	48	8.5x6.5		6H	8.5 12	82	19.5
	JSAM14×1-6HCCP		M14x1 1.0	48	10.5x8		6H	10.5 14	88	22
	JSAM14×1.25-6HCCP		M14x1.25 1.25	48	10.5x8		6H	10.5 14	88	22
	JSAM14×1.5-6HCCP		M14x1.5	1.5 48	10.5x8		6H	10.5 14	88	22
	JSAM16×1-6HCCP		M16x1	1.0 52	12.5x10		6H	12.5 16	95	22
	JSAM16×1.5-6HCCP		M16x1.5 1.5	52	12.5x10		6H	12.5 16	95	22
	JSAM18×1-6HCCP		M18x1 1.0	55	14x11		6H	14 18	100	27.5
	JSAM18×1.5-6HCCP		M18x1.5 1.5	55	14x11		6H	14 18	100	27.5
	JSAM18×2-6HCCP		M18x2 2.0	55	14x11		6H	14 18	100	27.5
	JSAM20×1-6HCCP		M20x1 1.0	58	15x12	6H		15 20	105	27.5
	JSAM20×1.5-6HCCP		M20x1.5 1.5	58	15x12	6H		15 20	105	27.5
	JSAM20×2-6HCCP		M20x2 2.0	58	15x12		6H	15 20	105	27.5

●标准库存 ○订单生产

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy steel

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB ≤ 252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)( > 55HRC)

涂层 Coated

★ ★

★

☆★★ ★☆

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

螺尖 Spiral Point

JIS 日标高性能丝锥系列 B/3.5-5.5PJIS Standard High-Performance HSSE-PM Tap

B TP 3.5-5.5P

型号 Model 涂层 Coated	库存 Stock	TDZ	尺寸 Dimension/mm
型号 Model 涂层 Coated	库存 Stock	TDZ	TP	LU	CZCMS	TCTR	DCONMS	TD	LF	THL
JPOM2-6HXBCP			M2	0.4 16	3x2.5	6HX	3	2	40	6
JPOM2.5-6HXBCP			M2.5	0.45 16	3x2.5	6HX	3	2.5	44	6.5
JPOM3-6HXBCP			M3	0.5 19	4x3.2	6HX	4	3	46	7.5
JPOM4-6HXBCP			M4	0.7	21 5x4	6HX	5	4	52	10.5
	JPOM5-6HXBCP		M5	0.8	24 5.5x4.5	6HX	5.5	5	60	12
	JPOM6-6HXBCP		M6	1.0	29	6x4.5 6HX	6	6	62	15
	JPOM8-6HXBCP		M8	1.25	37 6.2x5	6HX	6.2	8	70	18.8
	JPOM10-6HXBCP		M10	1.5	41	7x5.5 6HX	7	10	75	22.5
	JPOM12-6HXBCP		M12	1.75	48	8.5x6.5 6HX	8.5	12	82	26.3
	JPOM14-6HXBCP		M14	2.0	48	10.5x8 6HX	10.5	14	88	30
	JPOM16-6HXBCP		M16	2.0	52	12.5x10 6HX	12.5	16	95	30
	JPOM18-6HXBCP		M18	2.5	55	14x11 6HX	14	18	100	37.5
	JPOM20-6HXBCP		M20	2.5	58	15x12 6HX	15	20	105	37.5
	JPOM3×0.35-6HXBCP		M3x0.35	0.35	19	4x3.2 6HX	4	3	46	7.5
	JPOM4×0.5-6HXBCP		M4x0.5	0.5	21	5x4 6HX	5	4	52	10.5
	JPOM5×0.5-6HXBCP		M5x0.5	0.5	24	5.5x4.5 6HX	5.5	5	60	12
	JPOM6×0.5-6HXBCP		M6x0.5	0.5	29	6x4.5 6HX	6	6	62	15
	JPOM6×0.75-6HXBCP		M6x0.75	0.75	29	6x4.5 6HX	6	6	62	15
	JPOM8×0.75-6HXBCP		M8x0.75	0.75	37	6.2x5 6HX	6.2	8	70	18.8
	JPOM8×1-6HXBCP		M8x1	1.0	37	6.2x5 6HX	6.2	8	70	18.8
	JPOM10×1-6HXBCP		M10x1	1.0	41	7x5.5 6HX	7	10	75	22.5
	JPOM10×1.25-6HXBCP		M10x1.25	1.25	41	7x5.5 6HX	7	10	75	22.5
	JPOM12×1-6HXBCP		M12x1	1.0	48	8.5x6.5 6HX	8.5	12	82	26.3
	JPOM12×1.25-6HXBCP		M12x1.25	1.25	48	8.5x6.5 6HX	8.5	12	82	26.3
	JPOM12×1.5-6HXBCP		M12x1.5	1.5	48	8.5x6.5 6HX	8.5	12	82	26.3
	JPOM14×1-6HXBCP		M14x1	1.0	48	10.5x8 6HX	10.5	14	88	30
	JPOM14×1.25-6HXBCP		M14x1.25	1.25	48	10.5x8 6HX	10.5	14	88	30
	JPOM14×1.5-6HXBCP		M14x1.5	1.5	48 52	10.5x8 6HX 12.5x10	10.5	14	88	30
	JPOM16×1-6HXBCP		M16x1	1.0 1.5		6HX	12.5 12.5	16	95	30
	JPOM16×1.5-6HXBCP		M16x1.5	1.0	52	12.5x10 6HX 14x11 6HX	14	16	95	30
	JPOM18×1-6HXBCP		M18x1 M18x1.5	1.5	55 55	14x11 6HX	14	18 18	100	37.5
	JPOM18×1.5-6HXBCP		M18x2	2.0	55	14x11 6HX	14	18	100	37.5
	JPOM18×2-6HXBCP			1.0	58	15x12 6HX	15	20	100	37.5
	JPOM20×1-6HXBCP		M20x1	1.5	58	15x12 6HX	15	20	105	37.5
	JPOM20×1.5-6HXBCP		M20x1.5		58	15x12 6HX		20	105	37.5
	JPOM20×2-6HXBCP		M20x2	2.0			15		105	37.5

●标准库存 ○订单生产

切削材料推荐

Cutting material recommendation

加工材料Workpiecematerial

碳素钢低合金钢Carbon steelLow-alloy steel

合金钢调制钢Alloy steelTempered Alloy stee

高硬钢、淬硬刚High-hardnessHardened steel

铁素体、马氏体奥氏体不锈钢Femitic、Martensitic,Austenitic

铸铁Cast iron

铜合金Copperalloy

铝合金铸铝Aluminumalloy

石墨Graphite

钛合金Titaniumalloy

镍基合金Nickell-base alloy

塑料Plastic

(HB≤252)

(HRC ≤ 40)

(40-50HRC)

(50-55HRC)(&

gt; 55HRC)

涂层 Coated

★

☆★★★☆

★首选 First choice ☆可选 Good choice
＊因各类被加工材料加工性能差异较大，上表只列出适用的大类，如有具体材质，请查阅C216做进一步确认。＊ For specific material,please refer to C216 for further information.

可涨模块式系列铰刀

Expandable Modular Reamer

产品范围

Product scope

优势、产品亮点

Benefits and features

HEA10 可胀模块式铰刀头（中心内冷）

HEA10 可胀模块式铰刀头（中心内冷）

HEA20 可胀模块式铰刀头（分散内冷）

HEA20 可胀模块式铰刀头（分散内冷）

HEC20 可胀模块式铰刀头（中心内冷）

铰刀杆（圆柱柄）

安装调整：

Installation Adjustment:

直径补偿调整：

Compensation adjustment:

Tap Indentification System丝锥型号编制说明

Tap Indentification System丝锥型号编制说明

5非标长度 Non-standard length

9 材料类型Tool materials

<sub>锥</sub>选<sup>型</sup>

GB/ISO 国标通用丝锥系列 C/2-3PGB/ISO Standard General HSSE Taps

JIS 日标通用丝锥系列 B/3.5-5.5PJIS Standard General HSSE Tap

快速跳转到指定页