该页无缩略图
CDT6-2T Dual Delay Type Time Relay
| Technicalparameters | ||
| CDT6-2T | ||
| Function | Dual-set power-on delay | |
| Power terminal | A1-A2 | |
| Supd votrol power | W (AC/DC12V-240V) | AC/DC 12-240V(50-60Hz) |
| Power consumption Rated control power | AC 0.09-3VA/DC 0.05-1.7W AC 0.09-3VA/DC0.05-1.7W | |
| supplyvoltage Power consumption | M (AC220V) | AC max.6VA/1.9W |
| Allowable fluctuation range of power supply | ||
| Power indicator | -15%;+10% Green LED | |
| Delay range | 0.1 seconds-10days,rmallyopn,ormallyoed | |
| Setting method | knob | |
| Setting accuracy | 10% | |
| Repeatability | 0.2% | |
| Temperature fluctuation error | 0.05%/℃C,at=20°℃(0.05%°F，at=68°F) | |
| Output contact | Number of contacts | 2 sets of conversion contacts |
| 10A | 2*10A 250VAC/24VDC | |
| 16A | 2*16A 250VAC/24VDC | |
| Minimum switching power | 500mW | |
| Output relay indication | Red LED | |
| Mechanical life | 1×107 | |
| Electrical life (resistive load) | 1×105 | |
| Reset time | Maximum 200ms | |
| Operating ambient temperature | -20℃~+55℃ | |
| Storageand transportationambient temperature | -35C~+75℃ | |
| Installation method | 35 mm card rail installation | |
| Protection level | IP20 | |
| Installation location | Arbitrary | |
| Installation altitude | ≤2000m | |
| Pollution level | 2 | |
| Wiring ability | 1×2.5mm²or2×1.5mm²0.4N·m | |
| Dimensions | 90mm×18mm×65mm | |
| Weight | 80g | |
Functiondiagramw
Wiringdiagram
Shapeandsize (mm)
CDT6-Scycle Delay Type Time Relay
Application
Used forcycledelaycontrol,periodic power-on,lightingcontrol, andheatingcontrol ofanelectricalcircuit.
Features
ThereareseparatedelaysettingsforONandOFF,anddifferent delaytimescanbeset.
■Ultra-widedelayrange,O.1seconds-1o0dayscanbeset(10 gears).
■Differentworking modescanbeswitched by shorting S-A1.
■IthasAC/DC12V-240Vultra-wideoperatingvoltagespecifications tochoose from.
■TheworkingstatusoftherelayisindicatedbyanLEDindicator.
■Ultra-small size,only18mmwidth,35mmcard rail installation.
| No | Item | Code | Description |
| Product name | CDT6 | Clamp rail type time relay | |
| ② | Function code | S | Cycledelaytype time relay (loopdelay) |
| ③ | Outputhe gumberof | 1 | Group 1 conversion |
| 2 | Group 2 conversion | ||
| ④ | Output contact | 10 | Output contact 10A |
| 16 | Output contact 16A | ||
| 5 | Rated operating voltage | W | AC/DC12V-240V |
| M | AC220V | ||
| A-Zlettercombination | Custom voltage |
CDT6-S Cycle Delay Type Time Relay
| Technicalparameters | ||||
| CDT6-S1 | CDT6-S2 | |||
| Function | Cycledelay | |||
| Power terminal | A1-A2 | |||
| Rated yontrlpower | W | AC/DC12-240V(50-60Hz) | ||
| Power consumption | (AC/DC12V-240V) | AC 0.09-3VA/DC0.05-1.7W | ||
| Rated ontralroder | M (AC220V) | AC 220V(50-60Hz) | ||
| Power consumption | AC max.6VA/1.3W | AC max.6VA/1.9W | ||
| Allowablefluctuation range of power supply | -15%;+10% | |||
| Power indicator | Green LED | |||
| Delay range | 0.1 seconds-100 days | |||
| Setting method | knob | |||
| Setting accuracy | 10% | |||
| Repeatability | 0.2% | |||
| Temperature fluctuation error | 0.05%/℃C,at=20C(0.05%F,at=68°F) | |||
| Output contact parameters | Number of contacts | 1 set of conversion contacts | 2 sets of conversion contacts | |
| 10A | 1*10A250VAC/24VDC | 2*10A 250VAC/24VDC | ||
| 16A | 1*16A 250VAC/24VDC | |||
| Minimum switching power | 500mW | |||
| Output relay indication | Red LED | |||
| Mechanical life | 1×10 | |||
| Electricallife (resistive load) | 1x105 | |||
| Reset time | Maximum 200ms | |||
| Operating ambient temperature | -20°℃~+55℃ | |||
| Storeadtranspotatimien | -35C~+75℃ | |||
| Installation method | 35mm card rail installation IP20 | |||
| Protection level | Arbitrary | |||
| Installation location | ||||
| Instalation altitude | ≤2000m | |||
| Pollution level | 2 | |||
| Wiring ability | 1×2.5mm²or2×1.5mm0.4N·m | |||
| Dimensions | 90mm×18mm×65mm | |||
| Weight | 67g 80g | |||
CDT6-S Cycle Delay Type Time Relay
Functiondiagramw
Wiringdiagram
Shape and size (mm)
CDT6-P Delay Pulse Type Time Relay
Application
■Usedtodelayandgeneratea pulse，whichisusedtodelaya certainloadforaperiodoftime.
Features
■Separatedelaytimeand pulsewidthsetings,differentdelay timescanbeset.
■Ultra-widedelayrange，O.1seconds-100dayscanbeset (10 gears).
■Thedelaytimecanbe resetbyshorting S-A1.
■IthasAC/DC12V-240Vultra-wideoperatingvoltagespecifications tochoose from.
■TheworkingstatusoftherelayisindicatedbyanLEDindicator.
■Ultra-small size,only18mmwidth，35mmcardrail installation.
| No | Item | Code | Description |
| ① | Product name | CDT6 | Clamp rail type time relay |
| Function code | P | Time delay pulse type time relay (delay pulse) | |
| ③ | Outputhe numberof | 1 | Group 1 conversion |
| 2 | Group 2 conversion | ||
| 4 | Output contact | 10 | Output contact 10A |
| 16 | Output contact 16A | ||
| Rated operating voltage | M | AC220V | |
| W | AC/DC12V-240V | ||
| A-Zlettercombination | Custom voltage |
| Technicalparameters | ||||
| CDT6-P1 | CDT6-P2 | |||
| Function | Delay pulse output | |||
| Power terminal | A1-A2 | |||
| atpdyotrp powder | W | AC/DC 12-240V(50-60Hz) | ||
| Power consumption | (AC/DC12V-240V) | AC0.09-3VA/DC0.05-1.7W | ||
| Rated ontrolrower | AC 220V(50-60Hz) | |||
| Power consumption | M (AC220V) | AC max.6VA/1.3W | AC max.6VA/1.9W | |
| Allowablefluctuationrangeof power supply | -15%;+10% | |||
| Power indicator | Green LED | |||
| Delay range | 0.1 seconds-100 days | |||
| Setting method | knob | |||
| Setting accuracy | 10% | |||
| Repeatability | 0.2% | |||
| Temperature fluctuation error | 0.05%/℃C,at=20°℃(0.05%F，at=68F) | |||
| Output contact parameters | Number of contacts | 1 set of conversion contacts | 2sets of conversion contacts | |
| 10A | 1*10A 250VAC/24VDC | 2*10A 250VAC/24VDC | ||
| 16A | 1*16A 250VAC/24VDC | 2*16A 250VAC/24VDC | ||
| Minimum switching power | 500mW | |||
| Output relay indication | RedLED | |||
| Mechanical life | 1x107 | |||
| Electricallife (resistive load) | 1×105 | |||
| Reset time | Maximum 200ms | |||
| Operating ambient temperature | -20℃~+55℃ | |||
| Storeandtrasportionamient | -35℃C-+75℃ | |||
| Installation method | 35 mm card rail installation | |||
| Protection level | IP20 | |||
| Installation location | Arbitrary | |||
| Installation altitude | ≤2000m | |||
| Pollution level | 2 | |||
| Wiring ability | 1×2.5mm²or2x1.5mm0.4N·m | |||
| 90mm×18mm×65mm | ||||
| Dimensions | ||||
| Weight | 67g 80g | |||
Functiondiagramw
Wiringdiagram
Shapeand size (mm)
CDT6-ST Star-Delta Relay Time Relay
Application
■Itisspeciallyusedformotorstartrianglestart-upcontrol,which cangreatlysimplifytheelectricalcircuit,facilitatewiringand reducecosts.
Features
■t1:The start-updelayrangeof O.1s-10mincan be set (knob setting).
■t2:Theconversion time isO.1s-1scan be set (knobsetting). ■WithAC220,AC380，AC/DC12V-240Vultra-wideoperating ■voltagespecificationsareoptional.
■TheworkingstatusoftherelayisindicatedbyanLEDindicator. Ultra-smallsize,only18mmwidth,35mmcardrail installation.
| No | Item | Code | Description |
| ① | Product name | CDT6 | Clamp rail type time relay |
| ② | Function code | ST | Stardelta start time relay (star trianglestart delay) |
| ③ | Output the number of contact groups | 2 | Group 2 conversion |
| Output contact | 10 | Output contact 10A | |
| 16 | Output contact 16A | ||
| Rated operating voltage | M | AC220V | |
| W | AC/DC12V-240V | ||
| H | AC380V | ||
| A-Zlettercombination | Custom voltage |
| Technicalparameters | ||
| CDT6-ST | ||
| Function | Star Triangle start delay | |
| Power terminal | A1-A2 | |
| Rated control power suppy voltage | AC/DC 12-240V(50-60Hz) | |
| Powerconsumption | (AC/DC12V-240V) M (AC220V) H (AC380V) | AC 0.3-2VA/DC0.1-1.2W |
| Rated control power supply voltage | AC 220V,AC 380V(50-60Hz) | |
| Power consumption | AC max.6VA/1.3W | |
| Allowable fluctuation range of power supply | -15%+10% | |
| Power indicator | Green LED | |
| Delay range | Start-up delay:O.1 seconds-10 minutes,conversion delay:0.1s-1s | |
| Setting method | knob | |
| Setting accuracy | 10% | |
| Repeatability | 0.2% | |
| Temperature fluctuation error | 0.05%/℃,at=20℃(0.05%F,at6F) | |
| Output contact parameters | Number of contacts | 2 sets of conversion contacts |
| 10A | 2*10A 250VAC/24VDC | |
| 16A | 2*16A250VAC/24VDC | |
| Minimum switching power | 500mW | |
| Output relay indication | Red LED | |
| Mechanical life | 1x10 | |
| Electrical life (resistive load) | 1x105 | |
| Reset time | Maximum 200ms | |
| Operatingambient temperature | -20℃~+55℃ | |
| Storageand transportation ambient temperature | -35℃~+75℃ | |
| Installation method | 35mm card rail installation | |
| Protection level | IP20 | |
| Installation location | Arbitrary | |
| Installationaltitude | ≤2000m | |
| Pollution level | 2 | |
| Wiring ability | 1×2.5mm²or 2x1.5mm² 0.4N·m | |
| Dimensions | 90mm×18mm×65mm | |
| Weight | 80g | |
CDT6-ST Star-Delta Relay Time Relay
Functiondiagramw
Wiring diagram
Shapeand size ( \mathsf {mm } )
C CE△US
Application
Usedforcorridorcorridor,hallbathroomlightingdelaycotrol.
Features
Hasthreemodesofoperation: ON:Theoutputcontactremains ON,AUTO:Automaticdelay control,OFF:The outputcontact remains OFF L-3canbeconnected with neon light switch. Delayrange0.5-20mincanbeset(knobseting). ■RelayoperatingstatusisindicatedbyLEDindicator. Ultra-smallsize，only18mmwidth,35mmcardrailmount.
Product selection
CDT6-LS116
① ② ③ ④
| No | Item | Description |
| CDT6 series time relay | ||
| ② | Corridor delay switch | ： |
| ③ | Output the number of contact groups | 1:Group 1 conversion |
| ④ | Output contact | 16:Output contact 16A |
Technical parameters
| CDT6-LS | |
| Function | Corridor delay switch |
| Power terminal | L-N |
| Rated control power supply voltage | AC220V(50-60Hz) |
| Power consumption | AC max.6VA-1.3W |
| Allowable fluctuation rangeof power supply | -15%+10% |
| Power indicator | Green LED |
| Delay range | AUTO:0.5-20minONOFF |
Technicalparameters
| CDT6-LS | |
| Setting method | knob |
| Setting accuracy | 10% |
| Repeatability | 0.2% |
| Neon connection | Yes (N-3 or L-3) |
| Maximum number of neon connections | 230V,up to 75PCS (about 0.68mA/230VACat neoncurrent) |
| Temperature fluctuationerror | 0.05%/C,at=20℃ |
| Output contact parameters | 2 sets of conversion contacts |
| 16A/AC1 | |
| 250VAC/24VDC | |
| Minimum switching power | 500mW |
| Output relay indication | Red LED |
| Mechanical life | 1×107 |
| Electrical life (resistive load) | 1×105 |
| Reset time | Maximum 200ms |
| Operatingambient temperature | -20℃~+55℃ |
| Storageand transportationambienttemperature | -35C~+75°℃ |
| Installationmethod | 35mmcard rail installation |
| Protection level | IP20 |
| Installation location | Arbitrary |
| Installation altitude | ≤2000m |
| Pollution level | 2 |
| Wiring ability | 1×2.5mm²or2×1.5mm²0.4N·m |
| Dimensions | 90mmx18mm×65mm |
| Weight | 61g |
| Meet the standard | GB/T14048.5,IEC60947-5-1,IEC60669-2-3,EN 61812-1 |
Functiondiagramw
Wiringdiagram
Loadtype
| 鸟 | |||||
| 产 | |||||
| 2000W | 2000W | 1000W | 900W(125uF) | 400W | 300W |
Applicationexample
Shapeandsize (mm)
CDA6 AC CurrentMonitoring Relay
Application
Elevatoroverloadmonitoring,lightloadmonitoring.
Single-phasemotormonitoringcurrentmonitoring.
Currentoverload/under load indicationand protection.
Features
Theactiondelaytimeisadjustablefrom0.1sto10stoavoid peakcurrent.
Thepower-updelaytimeisadjustablefrom0.1sto10stoavoid thestart-upcurrentofthemotorload.
6-speedcurrentspecificationsareoptional.
■Built-inisolatedcurrenttransformer,andatthesametime,an externalcurrenttransformercanbeconnectedtoexpandthe monitoringcurrentrange.
■TheworkingpowersupplyvoltageisAC 85-240V.
■Theworkingstatusof therelayisindicatedbyan LEDindicator.
■Ultra-small size,only18mmwidth,35mmcardrail installation.
| No | Item | Code | Description |
| 1 | Product name | CDA6 | Voltage monitoring relay |
| ② | Function code | 1 | Overcurrent protection |
| 2 | Undercurrent protection | ||
| 3 | Over/under current protection | ||
| 4 | Overcurrent protection | ||
| ③ | Output contact | 10 10A Output contact 10A | |
| 16 | 16A Output contact 16A | ||
| ④ | Current detection range | A05 | 0.05A-0.5A |
| A1 | 0.1A-1A | ||
| A2 | 0.2A-2A | ||
| A5 | 0.5-5A | ||
| A8 | 0.8-8A | ||
| A16 | 1.6A-16A |
CDA6 AC Current Monitoring Relay
| Technicalparameters | |||||
| CDA6-1 | CDA6-2 | CDA6-3 | CDA6-4 | ||
| Function | Overcurrent protection|Under-current protection | Over/under current protection | Overcurrent protection | ||
| Power terminal | A1-A2 | ||||
| Rated supply voltage | AC85-240V | ||||
| Rated power frequency | 50/60Hz.0 | ||||
| Power consumption | max25VA | ||||
| Allowable fluctuation range of power supply | -15%;+10% | ||||
| Current setting range | 0.05A-0.5A/0.1A-1A/0.2A-2A/0.5A-5A/0.8A-8A/1.6A-16A | ||||
| Measuring current frequency | AC50HZ | ||||
| Maximum passing current | 1A/2A/5A/8A/12A/22A | ||||
| Current setting method | Knob setting | ||||
| Action delay time | 0.1s-10 s | ||||
| Power indicator | Green LED | ||||
| Setting accuracy | 10% | ||||
| Currentmeasurement accuracy Temperature fluctuation error | 5%(0.05-0.5A为10%) | ||||
| Hysteresis value | |||||
| Outputcontactparameters | 5% | ||||
| 10A 16A | 2*10A 250VAC/24VDC | ||||
| Minimum switching power | 2*16A 250VAC/24VDC | ||||
| 500mW | |||||
| Output relay indication | Red LED | ||||
| Mechanical life | 1×107 | ||||
| Electrical life (resistive load) Operating ambient temperature | 1×105 | ||||
| -20℃~+55℃ | |||||
| Strageandtrasptatinaen | -35℃-+75℃ 35mmcard rail installation | ||||
| Installation method Protection level | IP20 | ||||
| Installation location | Arbitrary | ||||
| ≤2000m | |||||
| Installation altitude | |||||
| Pollution level | 2 1×2.5mm²or2×1.5mm²0.8N·m | ||||
| Wiring ability | 90mm×18mm×65mm | ||||
| Dimensions Weight | 67g | ||||
CDA6 AC Current Monitoring Relay
Functiondiagramw
Wiringdiagram
Paneldiagram
Shape and size ( \mathsf {mm } )
CDA6-516 Current Monitoring Relay (Through core type) （204号 ④ CE△US
Application
Electricalequipmentovercurrentand undercurrentmonitoring
Features
Throughthecoredesign,noneedto disconnectthecurrent circuit,throughthecoreinstallationiseasytouse ■Thejumpercansettheover/undercurrentmonitoringmode ■SpecificationswithAC/DC generaldetectionareoptional ■Usingisolatedcurrenttransformer,whiletheexternalcurrent transformercan expand themonitoring currentrange WorkingpowersupplyvoltageAC/DC85V-240V RelayoperatingstatusisindicatedbyLEDindicator Ultra-smallsizeoly 1 8mm width,35mmcardrailmounting
Modeldesignation
CDA6-516/ ① ② ③
| No | Item | Description | |
| 1 | CDA6 series current monitoring relay | ： | |
| Design sequence number | ： | ||
| ③ | Function code | Designation | Function description |
| A | AC detection type | ||
| B | AC-DC detection type | ||
Technicalparameters
| CDA6-516 | |
| Feature | AC detection type |
| Power terminal | A1-A2 |
| Rated supply voltage | AC/DC 85V-240V |
| Rated power frequency | 50/60Hz,0 |
| Power consumption | Max 25VA |
| Power supply allowed fluctuation range | -15%;+10% |
Technical parameters
| Current setting range | CDA6-516 2A-20A |
| Measuring current frequency | |
| AC 50Hz | |
| Current setting mode Action delay time | knob |
| Power indicator light | 0.1s-10s |
| Setting accuracy | Green LED |
| Current measurement accuracy | 10% |
| Temperature fluctuation error | 5% |
| Lag value | |
| Exportation | 5% |
| 1xSPDT 10A/AC1 | |
| 250VAC/24VDC | |
| Minimum switching power | 500mW |
| Output relay indication | Red LED |
| Mechanical life | 1×10 |
| Electrical life | |
| Operating ambient temperature | 1x105 |
| Storageand transportationambient temperature | -20C~+55℃C |
| Installation mode | -35C-+75℃ |
| Class of protection | 35mm card rail installation |
| Installation position | IP20 |
| Installation elevation | Arbitrary |
| ≤2000m | |
| Pollution level | 2 |
| Wiring capacity | 1×2.5mm²or2×1.5mm²0.8N·m |
| Overall dimension | 90mm×18mm×86mm |
| Weight | 75g |
| Meet the standard | GB/T14048.5,IEC60947-5-1,IEC60669-2-3,EN61812-1 |
CDA6-516 Current Monitoring Relay (Through core type) \circledast （204号 ④ CE △
Functiondiagramw
Wiring diagram
Note:CDA6-516ouldpatentiontothetougenterdirectioenetectingDCthriseitaotbecuratelydetecteduch current less than 2A,It can bedonemultiple times through the heart.
Paneldiagram
Shapeandsize (mm)
CDB6 Sensitivity Adjustable Light Control Switch
Application
Usedforcorridor,outdoor,lightboxautomatic lighting.
■Fordevicesthatneedtobeturnedonautomaticallyatnight.
Features
Lightsensitivity (illuminance)canbeadjustedasneeded.
■Built-in lightdetectionsensor.
■Canbeset to work inon-auto-off mode.
■Anexternal switchcanbeusedtoturn off the output.
■Workingpowersupply voltageAC11oV\~240V.
■TheworkingstatusisindicatedbyLEDindicator.
■Ultra-small size,only18mmwidth,35mmcardrailmounting.
Accessory
Productselection
CDB6-1116
① 2 4
| No | Item | Description | |
| CDB6 series light-controlled switch | |||
| Function code | Designation | Function description | |
| 1 | 2-pole liquid level monitoring | ||
| 2 | 1or2 level monitoring | ||
| Output the number of contact groups | Group 1 conversion | ||
| ③ | Output contact | Output contact 16A | |
Technical parameters
| CDB6-1116 | |
| Feature | Light-controlled switch |
| Power terminal | L-N |
| Rated supply voltage | AC 110V-240V |
| Rated power frequency | 50/60Hz |
| Power consumption | Max2VA |
| Powersupply allowed fluctuation range | -15%; +10% |
CDB6 Sensitivity Adjustable Light Control Switch
Technicalparameters
| CDB6-1116 | |
| Sensitivity adjustment range | About 1-100Lx |
| Working mode | On-auto off can be set |
| Power indicator light | Green LED |
| Sensor detection error | ±35% |
| Actiondelay time | 2min |
| Probe lead length | Max 50m |
| Output contact parameters | 1xSPST |
| 16A/AC1 | |
| 250VAC/24VDC | |
| Minimumswitching power | 500mW |
| Output relay indication | Red LED |
| Mechanical life | 1×10 |
| Electrical life | 1×105 |
| Operatingambient temperature | -20C~+55℃ |
| Storage and transportation ambient temperature | -35℃-+75°C |
| Installation mode | 35mmcard rail installation |
| Class of protection | IP20 |
| Installation position | Arbitrary |
| Installation elevation | ≤2000m |
| Pollution level | 2 |
| Wiring capacity | 1×2.5mm²or2×1.5mm²0.8N·m |
| Overall dimension | 90mm×18mm×65mm |
| Weight | 62g |
| Meet the standard | GB/T 14048.5,EN 60255-1 |
Functiondiagramw
Wiringdiagram
Note:If itisnotnecessary toconnecttheclosecontrolbuttonextermalyterminal3canbeleftunconnected.
Panel diagram
Shape and size (mm)
Features
■Fourworkingmodesareoptional,andtheambienttemperature and humiditythresholdscan beset.
Capacitivehumiditysensor,lowpowerconsumption,stable performance;
■Passiverelayoutput,canbeusedtodrivecooling fan，TEC， heatingwireand otherdevices;
Theworkingstatusof therelayis indicatedbythe LEDindicator;
■WorkingpowersupplyvoltageAC85-240V;
Ultra-small size,only 1 8mm width, 3 5mm card rail installation; Applicabletocontrolthe temperatureand humidityrangeof powerdistributioncabinets;
Placard
Modeldesignation
CDE6-110M 1 2 4
| No | Item | Designation | Description |
| Product name | CDE6 | Clamprail temperatureand humidity controller | |
| Function code | 1 | 1 group output | |
| ③ | Output contact | 10 | Output contact 10A |
| Ratedoperatingvoltage | M | AC85-240V50/60Hz | |
| Designsequencenumber | A-Z lettercombination | Custom voltage |
Commonmodel
| Product Model | Function | Output contact parameter | Rated voltage |
| CDE6-110M | Temperatureand humidity control | Output contact 10A | AC220V 50/60Hz |
Technical parameters
| Feature | Temperatureand humiditycontrol |
| Power terminal | A1-A2 |
| Ratedoperatingvoltage | AC85-240V50/60Hz |
| Powerconsumption | |
| Power indicatorlight | Green LED |
| Relaystatuslight | Red LED |
GUEO Temperature and Humidity Controller
Technicalparameters
| Set range | Temperature | 10°℃-60°℃ |
| Humidness | 50%-90%RH | |
| Precision error | Temperature | ±2℃ |
| Humidness | ±3% (20%-80% range),±7% (80%) | |
| Output contact parameters | 1 set output,10A250VAC/24VDC | |
| Operatingambient temperature | -20℃~+55℃ | |
| Storageandtrasportonambient | -35C~+75°℃ | |
| Installation mode | 35mm card rail installation | |
| Installationelevation | ≤2000m | |
| Pollution level | 2 | |
| Wiring capacity | 1x2.5mm²or2x1.5mm²0.4N·m | |
| Overall dimension | 90mm×18mm×50mm | |
| Weight | 65g | |
Workingmode
HT: RH > RHset or Tamb > Tset, the relay draws when the humidity is greater than the sethumidity or temperatureis greater than the set temperature.
TH: RH> RHset or Tamb<
Tset,the relay draws when the humidity is greater than the set humidityor the
temperature is less than the set temperature.
HL: RH \mathbf { \zeta } < RHset,therelay draws when the humidity is less than the set humidity.
HM: RH > RHset,the relay draws when the humidity is greater than the set humidity.
Wiringdiagram
Shape and size (mm)
Precautions foruse
TheinstallatinpositinmustbewellventlatedndventilatedDonotbnartheeatsourcetoavoidafectingtheaccuracyof temperatureand humiditydetection.
(Other general notesarecopied)
C CEUS
Application
■Usedforovervoltageprotection ofelectrical equipmentor compressors. ■Switching controlof emergency/backuppower supply.
Features
■Monitoritsownoperatingvoltage (trueRMSmeasurement) Theworkingmodecanbeselectedthroughtheknob. ■Thevoltagemeasurementaccuracyis <= 1 % ■TheworkingstatusoftherelayisindicatedbyanLEDindicator. ■Ultra-smallsize,only18mmwidth 3 5mm card rail installation.
| No | Item | Code | Description | ||
| ① | Product name | CDV6 | Voltagemonitoring relay | ||
| Fonction code | 1 | Overvoltage/undervoltage isselectedby knob | |||
| 2 | It also has over and under voltage function | ||||
| ③ | Output contact | 10 | Output contact 10A | ||
| 16 | Output contact 16A | ||||
| ④ | Ratedoperating voltage | Code name | Rated supply voltage | Limit operating voltage | Set voltage range |
| D12 | DC12V | DC7...20V | DC9.15V | ||
| AD48 | AC/DC24..48V | AC/DC15...270V | AC/DC20..80V | ||
| AD240 | AC/DC110...240V | AC/DC50...270V | AC/DC 65...260V | ||
| A220 | AC220V | AC 160...270V | AC 180...260V | ||
CDV6 Single-Phase Voltage Monitoring Relay
| Technicalparameters | CDV6-02 | ||||
| CDV6-01 | |||||
| Function | Voltagemonitoring A1(+)-A2(-) | ||||
| Power terminal (monitoring terminal) | DC12V,AC/DC24V-48V,AC/DC110V-240V,AC220V | ||||
| Rated supply voltage | 45Hz-65Hz,0 | ||||
| Rated power frequency | |||||
| Rated insulation voltage | 460V 5%-20% | 3% fixed | |||
| Hysteresis value Power indicator | |||||
| Action delay time | Green LED | ||||
| Voltage measurement error | 0.1s-10s,10% ≤1% | ||||
| Power-on delay time | 0.5s | ||||
| Knob setting accuracy | 10% | ||||
| Reset time | 1s | ||||
| Temperature fluctuation error | 0.05%/C,at=20℃C | ||||
| Output contact parameters | 10A | 1*10A 250VAC/24VDC | 2*10A250VAC/24VDC | ||
| 16A | 1*16A 250VAC/24VDC | 2*16A 250VAC/24VDC | |||
| Minimum switching power | 500mW | ||||
| Output relay indication | Red LED | ||||
| Mechanical life | 1×10 | ||||
| Electrical life (resistive load) | 1×105 | ||||
| Operatingambient temperature | -20℃C~+55℃ | ||||
| Storgeadtrasptiient | -35C~+75℃ | ||||
| Installation method | 35mm card rail installation | ||||
| Protection level | IP20 | ||||
| Installation location | Arbitrary | ||||
| Instalation altitude | ≤2000m | ||||
| Pollution level | 2 | ||||
| Wiring ablity | 1×2.5mm²or2x1.5mm²0.8Nm | ||||
| Dimensions | 90mm×18mm×65mm | ||||
| Weight | 67g | ||||
Function diagramw
Wiringdiagram
Paneldiagram
Shapeand size ( \min )
CDV6 Three-Phase Voltage Monitoring Relay
Application
Usedforequipmentprotectionandcontrol (towercranes,air conditioners,elevators,agriculturalequipment,refrigerated trucks).
■Protecttheequipmenttopreventaccidentscausedbyreverse operation.
■Normal/emergencypowerswitch.
■Prevent phase disconnection of the power load.
Features
■Monitoritsownoperatingvoltage (true RMSmeasurement), 45Hz\~65Hzwidefrequencymeasurement.
■8kindsofratedvoltagesareadjustable，suitableforvoltagesin variousregionsoftheworld.
3-phase3-wireand3-phase4-wirespecificationsareoptional.
Thevoltagemeasurementaccuracyis <= 1 %
Ithasananti-harmonicmodel，whichisoptimizedforhighantiinterferenceoccasions.
TheworkingstatusoftherelayisindicatedbyanLEDindicator.
■Ultra-small size,only18mmwidth 3 5mm card rail installation.
| No | Item | Code | Description | ||||||
| Product name | CDV6 | Voltage monitoring relay | |||||||
| ② | Function code | Function code | Overvoltage | Undervoltage | Voltageimbalance | Action delay | Phase sequence protection | Phase-off protection | |
| 3 | ： | ： | · | · | |||||
| 4 | 2%...20% | -20%...2% | - | 0.1s...10s | · | · | |||
| 5 | 2%...20% | -20%...2% | 8% | 0.1s..10s | · | · | |||
| 6 | 2%...20% | -20%...2% | 5%..15% | 2s | · | ||||
| 7 | 5%..15% | 0.1s..10s | · | · | |||||
| 8 | 15% | -15% | 8% | 2s | · | · | |||
| ③ | Output contact | 16 | Output contact 16A | ||||||
| 4 | Form | None | Common type | ||||||
| X | Anti-harmonic type | ||||||||
| 5 | Rated operting | Code name | Rated voltage gear | ||||||
| P N | 220-230-240-380-400-415-440-460VAC(P-P) | ||||||||
| 127-132-138-220-230-240-254-265VAC(P-N) | |||||||||
CDV6 Three-Phase Voltage Monitoring Relay
Technical parameters
| P | N | ||
| Function | Monitor L-L voltage (3-phase 3-wire system) | MonitorL-Nvoltage (3-phase4-wire system) | |
| Monitoring terminal | L1-L2-L3 | L1-L2-L3-N | |
| Power supply | L1-L2 | L1-N | |
| Rated operating voltageselection | 220-230-240-380-400 -415-440-460(P-P) | 127-132-138-220-230 -240-254-265(P-N) | |
| Measuring frequency range | 45Hz-65Hz | ||
| Measuring range | 176V-552V | 101V-318V | |
| Voltage threshold range | 2%-20% (rated voltage) | ||
| Unbalanced value threshold range | 5%-15% | ||
| Voltage fixed hysteresis rate | 2% | ||
| Power indicator | Green LED | ||
| Action delay time | 0.1s - 10s(Adjustable) | ||
| Voltage measurement error | ≤1% | ||
| Power-on delay time | 0.5s | ||
| Knob setting accuracy | 10% | ||
| Reset time | 1s | ||
| Temperature fluctuation error | 0.05%/C,at=20℃C | ||
| Output contact parameters | 2*16A250VAC/24VDC | ||
| Minimum switching power | 500mW | ||
| Output relay indication | RedLED | ||
| Mechanical life | 1×10 | ||
| Electrical life (resistive load) | 1x105 | ||
| Operating ambient temperature | -20℃~+55°℃ | ||
| Storageand transportationambient temperature | -35C~+75°℃ | ||
| Installation method | 35mmcard rail installation | ||
| Protection level | IP20 | ||
| Installation location | Arbitrary | ||
| Installation altitude | ≤2000m | ||
| Pollution level | 2 | ||
| 1×2.5mm²or 2×1.5mm²0.8N·m | |||
| Wiring ability | |||
| Dimensions | 90mm×18mm×65mm 67g | ||
CDV6 Three-Phase Voltage Monitoring Relay
Wiringdiagram
Panel diagram
Functiondiagramw
CDV6 Three-Phase Voltage Monitoring Relay (2 Sets Of Outputs)
④ CEUS
Application
■Usedforequipmentprotectionandcontrol (towercranes,air conditioners,elevators,agriculturalequipment,refrigerated trucks).
■Protecttheequipmenttopreventaccidentscausedbyreverse operation.
■Normal/emergencypowerswitch.
■Prevent phase disconnection of the power load.
Features
■Monitoritsownoperatingvoltage (trueRMSmeasurement)， 45Hz\~65Hzwide frequencymeasurement.
■Twosetsofoutputcontactsareused for protectionand fault alarm.
*s kindsofratedvoltagesareadjustable,suitableforvoltagesin variousregionsoftheworld.
■3-phase3-wireand3-phase4-wirespecificationsareoptional.
■Thevoltagemeasurementaccuracyis <= 1 %
■Anti-harmonicdesign,optimizedfor highanti-interference occasions.
■TheworkingstatusoftherelayisindicatedbyanLEDindicator.
■Ultra-small size,only18mmwidth 3 5mm card rail installation.
| No | Item | Code | Description | ||||||
| Product name | CDV6 | Voltage monitoring relay | |||||||
| ② | Function code | Function code | Overvoltage | Undervoltage | Voltage imbalance | Action delay | Phase sequence protection | Phase-off protection | |
| 3D | ： | ： | · | · | |||||
| 4D | 2%...20% | -20%...2% | 0.1s..10s | · | · | ||||
| 5D | 25%...20% | -20%...2% | 8% | 0.1s..10s | · | · | |||
| 6D | 2%...20% | -20%...2% | 5%...15% | 2s | · | ||||
| 7D | - | ： | 5%..15% | 0.1s..10s | · | ||||
| 8D | 15% | -15% | 8% | 2s | · | · | |||
| ③ | Output contact | 08 | Output contact 8A | ||||||
| Form | None | Common type | |||||||
| X | Anti-harmonic type | ||||||||
| 5 | Rated operating | Code name | Rated voltage gear | ||||||
| P N | 220-230-240-380-400-415-440-460VAC(P-P) | ||||||||
| 127-132-138-220-230-240-254-265VAC(P-N) | |||||||||
CDV6 Three-Phase Voltage Monitoring Relay (2 Sets Of Outputs)
Technicalparameters
| P | N | ||
| Function | Monitor L-L voltage (3-phase 3-wire system) | MonitorL-N voltage (3-phase 4-wire system) | |
| Monitoring terminal | L1-L2-L3 | L1-L2-L3-N | |
| Power supply | L1-L2 | L1-N | |
| Rated operating voltageselection | 220-230-240-380-400 | 12-132-148-220-23 | |
| Measuring frequency range | 45Hz-65Hz | ||
| Measuring range | 176V-552V | ||
| Voltage threshold range | 2%-20%(rated voltage) | ||
| Unbalanced value threshold range | 5%-15% | ||
| Voltage fixed hysteresis rate | 2% | ||
| Power indicator | Green LED | ||
| Action delay time | 0.1s- 10s(Adjustable) | ||
| Voltage measurement error | ≤1% | ||
| Power-ondelay time | 0.5s | ||
| Knob setting accuracy | 10% | ||
| Reset time | 1s | ||
| Temperature fluctuationerror ouramt contact | 0.05%/C,at=20℃C | ||
| Minimumswitching power | 2*8A250VAC/24VDC | ||
| Output relay indication | 500mW Red LED | ||
| Mechanical life | 1×107 | ||
| Electricallife (resistive load) | 1x105 | ||
| Operating ambient temperature | -20℃~+55°℃ | ||
| -35C~+75℃ | |||
| Storageadtrasportiamient | 35mm card rail installation | ||
| Installation method | IP20 | ||
| Protection level | Arbitrary | ||
| Installation location | |||
| Instalation altitude | ≤2000m | ||
| Pollution level | 2 | ||
| Wiring abilty | 1×2.5mm²or 2×1.5mm²0.8N·m | ||
| Dimensions | 90mm×18mm×65mm | ||
| Weight | 67g | ||
Wiringdiagram
Paneldiagram
Functiondiagram
Application
■Liquid level detection
Features
■Thefollowingtwomodesofoperationcanbeimplementedon onespecification: 2-polelevelcontrol 1 poleliquid level control
Drainageandwatersupplymodecanbeset.
■Actiondelay O.1s-10sadjustable.
■WorkingpowersupplyvoltageAC/DC85\~240V,isolatedpower supplydesign.
■RelayoperatingstatusisindicatedbyLEDindicator.
■Ultra-small size,only18mmwidth,35mmcardrail mounting.
Modeldesignation
CDL6-1116
① 2 5 4
| No | Item | Description | |
| CDL6 series water level relay | ： | ||
| ② | Function code | Designation | Function description |
| 1 | 2-pole liquid level monitoring | ||
| 2 | 1or2 level monitoring | ||
| ③ | Output the number of contact groups | Group 1 conversion | |
| ① | Output contact | Output contact 16A | |
Technicalparameters
| CDL6-1116 | CDL6-2116 | |
| Feature | 2-pole liquid level monitoring | 1or 2 level monitoring |
| Power terminal | A1-A2 | |
| Rated supply voltage | AC/DC24V-240V(50-60Hz) | |
| Powerconsumption | Max2VA | |
CDL6 Sensitivity Adjustable Level Relay
Technicalparameters
| rechnicatparaneters | CDL6-1116 | CDL6-2116 |
| Power supply allowed fluctuation range | -15%:+10% | |
| Electrodedetection voltage | Max.AC5V | |
| Electrode current | AC | |
| Response time | Max.400ms | |
| Electrode cable allowable distributed capacitance (Max.) | 800nF(sensitivitymax),100nF(sensitivitymin) | |
| Electrodecable length | Up to 100meters | |
| Action delay time | ||
| Setting accuracy | 0.1s-10s (adjustable) | |
| Output contact parameters | 10% 1xSPDT | |
| 10A/AC1 | ||
| 250VAC/24VDC | ||
| Minimum switching power | 500mW | |
| Output relay indication | Red LED | |
| 1x10' | ||
| Mechanical life | 1x105 | |
| Electricallife | ||
| Operatingambient temperature | -20°C~+55°C | |
| Storageand transportationambient temperature | -35°C-+75°C | |
| Installation mode | 35mm card rail installation IP20 | |
| Class of protection | Arbitrarily | |
| Installation position | ≤2000m | |
| Installation elevation | 2 | |
| Pollution level | ||
| Wiring capacity | 1x2.5mm²or2x1.5mm²0.4N·m | |
| Overall dimension | 90mm×18mm×65mm | |
| Weight Meet the standard | 61g 81g GB/T 14048.5,EN 60255-1 | |
CDL6 Sensitivity Adjustable Level Relay
Functiondiagramw
Wiringdiagram
C CE△US
Application
■Pulserelay,canbecontrolledfrommultipledifferentpositions (unlimitednumber),canreplacethe3-wayswitch,wiringis moresimple,economicalandconvenient.
Features
Twovoltagespecifications,AC220VorAC/DC12V\~240V. ■AC22oVspecificationcanbeconnectedwithneon light switch. Relay operating statusisindicatedby LED indicator. ■Ultra-smallsize,only18mmwidth,35mmcardrail mounting
Modeldesignation
| No | Item | Description |
| CDM6 series electronic pulse relay | ||
| ② | Output the number of contact groups | 11:1 Group conversion |
| 22:2 Group conversion | ||
| ③ | Output contact | 10:Output contact 10A |
| 16:Output contact 16A | ||
| Rated power supply voltage | W:AM/DC220-240V |
Technicalparameters
| CDM6-1 | CDM6-2 | |
| Functional model | 1 | 2 |
| Power terminal | A1-A2 | |
| Ratedsupply voltage | AC/DC12V-240V(50-60Hz) | |
| Powerconsumption | AC0.09-3VA/DC0.05-1.2W | |
Technicalparameters
| CDM6-1 | CDM6-2 | |
| Rated supply voltage | AC 230V(50-60Hz) | |
| Power consumption | AC max.12VA/1.3W | |
| Power supplyallowed fluctuation range | AC max.12VA/1.9W -15%;+10% | |
| Power indicator light | Green LED | |
| Control terminal | A1-S | |
| Neon connection | ||
| AC230V specificationsavailable (A1-S) | ||
| Maximum number of neon connections | 230V,up to 75PCS (about 0.68mA/230VACat neoncurrent) | |
| Control signal width Output relay | Min. 25ms | |
| 1xSPDT 16A/AC1 | 2xSPDT | |
| 250VAC/24VDC | ||
| Minimum switching power | 500mW | |
| Output relay indication | Red LED | |
| Mechanical life | 1x107 | |
| Electrical life | 1x105 | |
| Reset time | Max.200ms | |
| Operatingambient temperature | -20°C~+55°C | |
| Storageandtransportationambient temperature | -35°C~+75°C | |
| Installation mode | 35mmcard rail installation | |
| Class of protection | IP20 | |
| Installation position | Arbitrarily | |
| Installation elevation | ≤2000m | |
| 2 | ||
| Pollution level | ||
| Wiring capacity | 1x2.5mm²or2x1.5mm²0.4N·m | |
| Overall dimension | 90mm×18mm×65mm | |
| Weight | W240-58g,A220-57g W240-79g,A220-77g | |
| Meet the standard | GB/T14048.5,EN60810-1 | |
Functiondiagramw
Wiringdiagram
Paneldiagram
Thelightscanbeotrolledatdirentlocationsinoomnddirentsetsoflightsanbeturedoccodingtctld
Shapeandsize (mm)
Application
Used forheatertemperaturecontrol,equipment,room temperaturecontrol,cabinetequipmentriskcontrolsystem.
Features
Using NTC sensor,with sensorshortcircuit,opencircuit monitoring.
Optional heating/coolingoperationmode.
■Workingpower supplyvoltageAC/DC24Vto240V.
■TheworkingstatusisindicatedbyLEDindicator.
■Ultra-small size,only 1 8mm width,35mmcardrailmounting.
Modeldesignation
CDW6-1116
① 2 ③ ④
| No | Item | Description | |
| CDW6 series temperature control relay | ： | ||
| ② | Design sequence number | Designation | Operating voltage |
| 1 | High/low temperature monitoring | ||
| 2 | Temperature range monitoring | ||
| ③ | Output the number of contactgroups | 1 | 1 groups |
| ① | Output contact | 16 | Output contact 16 |
Technical parameters
| CDW6-1 | CDW6-2 | |
| Functional model | Monitorhigh/lowtemperatures | Monitoring temperature range |
| Power terminal | L-N | |
| Ratedsupply voltage | AC/DC 24V-240V | |
| Rated power frequency | 50/60Hz | |
| Power consumption | Max.2VA | |
| Power supply allowed fluctuation range | -15%;+10% | |
Dual Mode Temperature Control Relay
Technicalparameters
| CDW6-1 | CDW6-2 | |
| Temperaturecontrol range | -15C to+45C | |
| Temperaturemeasurementerror | ±2℃ | |
| Temperature adjustment lag value | 0.5℃ to 5°℃ | |
| Working mode | Heating-cooling-on-off can be set | |
| Power indicator light | Green LED | |
| Output contact parameters | ||
| 16A/AC1 | 1xSPST | |
| 250VAC/24VDC | ||
| Minimum switching power | 500mW | |
| Output relay indication | RedLED | |
| Mechanical life | 1x10 | |
| Electrical life | ||
| Operating ambient temperature | 1x105 | |
| Storageand transportationambient temperature | -20℃-+55℃ | |
| Installation mode | -35C-+75℃ | |
| Class of protection | 35mm card rail installation | |
| IP20 | ||
| Installation position | Arbitrarily | |
| Installation elevation | 2000m | |
| Pollution level | 2 | |
| Wiring capacity | 1x2.5mm²or 2x1.5mm²0.8N-m | |
| Overall dimension | 90mm×18mm×65mm | |
| Weight | 62g | |
| Meet thestandard | GB/T14048.5,EN 60255-1 | |
Function diagramw
CDW6 Dual Mode Temperature Control Relay
Shape andsize (mm)
Wiringdiagram
Applicationcasediagram
Panel diagram
CDR6 Modular IntermediateRelay
C CEUS
Application
■Intermediaterelaysareusedtoswitchacertaincurrentload, increasetheloadcapacityorincreasethenumberofcontact groups.
Features
■Ratedvoltage:AC/DC12V，24V，48V,110V，AC220V.
■CDR6-316 can beused to switchthree-phasecircuits.
■RelayoperatingstatusisindicatedbyLEDindicator.
■Ultra-small size,only18mmwidth,35mmcardrail mounting.
Modeldesignation
CDR6-1/ ① ② ③
| No | Item | Description | |
| 1 | CDR6 series intermediate relay | ： | |
| Output the number of contact groups | Designation | Operating voltage | |
| 1116 | 1xSPDT16A | ||
| 2216 | 2xSPDT16A | ||
| 1110 | 1xSPDT10A | ||
| 2210 | 2xSPDT10A | ||
| ③ | Function code | Designation | Operating voltage |
| 12 | AC/DC12V | ||
| 24 | AC/DC24V | ||
| 48 | AC/DC 48V | ||
| 110 M | AC/DC110V AC220V | ||
CDR6 Modular Intermediate Relay
Technicalparameters
| CDR6-1116 | CDR6-2216 | CDR6-1110 | ||
| CDR6-2210 | ||||
| Power terminal | A1-A2 | |||
| Ratedsupply voltage | AC/DC12V,24V,48V1V | |||
| Power consumption | AC.max12VA/DC.max1.9W | |||
| Power terminal | A1-A2-A3 | |||
| Ratedsupply voltage | AC220V(A1-A2), AC/DC24V(A1-A3) | |||
| Power consumption | AC.max12VA/DC.max1.9W | |||
| Power supply allowed fluctuation range | -15%;+10% | |||
| Maximum switching time Output contact parameters | 1xSPDT | 40ms | ||
| 1x16A | 2xSPDT 2x16A | 1xSPDT 1x10A | 2xSPDT 2x10A | |
| 250VAC/24VDC | ||||
| Minimum switching power 500mW | ||||
| Output relay indication | Red LED | |||
| Mechanical life | 1x10 | |||
| Electrical life | 1x105 | |||
| Reset time | max.200ms | |||
| Operating ambient temperature | -20°℃-+55℃(-4°Fto131°F) | |||
| Storageandtransportationambienttemperature | -35C-+75C(-22°Fto 158°F) | |||
| Installation mode | 35mm card rail installation | |||
| Class of protection | IP20 | |||
| Installation position | Arbitrarily | |||
| Overvoltage class | II | |||
| Pollution level | 2 | |||
| Wiring capacity | 1x2.5mm²or2x1.5mm²0.8N-m | |||
| Overall dimension | 90mm×18mm×65mm | |||
| Weight | 55g 70g | |||
| 67g 80g | ||||
Wiringdiagram
Shape and size (mm)
Sensor Division
CJYProximity SensorCylindrical Type E01-09
CJY-TProximity Sensor Cylindrical Connector Type E10-16
CJY-RProximity Sensor Cylindrical Cable Connector Type E17-23
CJY SLong Distance Proximity Sensor Cylindrical Type E24-27
CJY S-TLong Distance Proximity Sensor Cylindrical Connector Type E28-31
CJYS-RLong Distance Proximity Sensor Cylindrical Cable ConnectorType E32-35
CJF ProximitySensorSquare Type E36-42
CJF Proximity Sensor Flat Type E43-45
CJF Proximity Sensor Cylindrical Type E46-50
CJFLong Distance Proximity Sensor Flat Type E51-53
CRYCapacitive Proximity Sensor E54-56
MYAnalogProximitySensor E57-58
CHY Hall Sensor E59-60
CXYMagnetic Sensor E61-62
CGY Photoelectric Sensor Cylindrical Type E63-68
CGFPhotoelectric SensorSquare Type E69-78
CGUPhotoelectric SensorUType E79-82
SensorAccessories E83
CJY J Proximity Sensor Cylindrical Type
Features
Orangemarkforstandardtype ■Light greenmarkforhigh-endtype
Insidesurgeprotection,reversepolarityprotection
Longuse-lifecycleandhighreliability，easyinstall,enconomicprice
RedLEDstatusindication,easytoconfirmworksituation
Protectionstructure IP67(IECstandard)
Replaceableforlimitswitches
ExclusivelydesignedICforimprovinganti-jammingcapability
ModelNumberStructure
| Item | Code | Description |
| ① Company code | C | Company code |
| ② Product name | J | Inductive proximitysensor |
| ③Shape of shell | Y | Cylinder-shaped |
| ④Dimension code | 18 | 18=M18 |
| ⑤Product type | Without | Without =High-end type (Light green head) |
| E | E=Standard type (Orange head) | |
| ⑥ Detection distance | 08 | 08=8mm |
| ⑦ Output mode | K | AC2wires |
| L | DC 2wires | |
| P | PNP3wires | |
| N | NPN 3wires | |
| ③Output state | A | NO |
| B | NC | |
| ⑨Connection | C | NO+NC |
| Without | Without:Lead wire | |
| T | Plug-in | |
| R | Wiring leads Plug-in |
CJY Proximity Sensor Cylindrical Type
Specifications
DC3-wire type
| Model | High-end type | CJY04-01NA CJY04-01NB CJY04-01PB | CJY05-01NA CJY05-01NB CJY05-01PB | CJY06-01NA CJY06-01NA CJY06-01PB | CJY6.5-1.5NA CJY6.5-1.5NB | |
| Standard type | 1 | 1 | 1 | CJY6.5-1.5PB 1 | ||
| Sensing distance | 1mm | 1mm | 1mm | 1.5mm | ||
| Hysteresis | Max.10% of sensing distance | |||||
| Standard sensing target | 6×x1mm | 7×7×1mm | 8×8x1m | 8×8×15m | ||
| Setting distance | 0~0.8mm | 0~0.8mm | 0~1.0mm | 0~6.5mm | ||
| Powersupply (Operating voltage) | 12-24VDC (10-30VDC) | |||||
| Leakage current | Max.10mA | |||||
| Response frequency (1) | 1500Hz | 1500Hz | 1000Hz | 1000Hz | ||
| Residual voltage (※2) | Max. 1.0V | |||||
| Affection by Temp. | Max.±10%forsensingdistanceatambient temperature20℃ | |||||
| Control output | Max.200mA | |||||
| Insulation resistance | Min.50MΩ(at500VDC megger) | |||||
| Dielectric strength | 1500VAC50/60Hz for1minute | |||||
| Vibration | 1mmamplitude at frequencyof 10 to 55Hz(for1 min.)ineach ofX,Y,Zdirections for2 hours | |||||
| Shock | 500m/s²(approx.50G)X,Y,Zdirections for times | |||||
| Indicator | Operation indicator(red LED) | |||||
| Ambient temperature | -25~+70C (No icing) | |||||
| Storage temperature | -30~+80℃(No icing) | |||||
| Ambient humidity | 35~95%RH(No condensation) | |||||
| Protection circuit | Surge protection circuit, Reverse polarity protection circuit, Overcurrent protection circuit Case/Nut:NickelplatedrassWasher:Nckelpated lonensingurace:Ptandardcable(Grey):olyinl | |||||
| Material | chloride(PVC),Oil resistant cable(Black):Oil resistant Polyvinyl chloride(PVC) | |||||
| Cable | Φ2.8,3P,2m | |||||
| AWG22, Core diameter: 0.1mm,Number of cores: 22, Insulator diameter:1.25 | ||||||
CJY Proximity Sensor CylindricalType
Specifications
| DC3-wire type | ||||||||||
| Model | High-end type | CJY08-01NA CJY08-01NB CJY08-01PA CJY08-02PA CJY08-01PB | CJY08-02NA CJY08-02NB CJY08-02PB | CJY12-02NACJY12-04NA CJY12-02NB CJY12-02NC CJY12-02PA CJY12-02PB CJY12-02PC | CJY12-04NB CJY12-04NC CJY12-04PA CJY12-04PB CJY12-04PC CJY12E-02NACJY12E-04NACJY18E-05NA | CJY18-05NA CJY18-05NB CJY18-08NB CJY18-05NC CJY18-05PA CJY18-05PB CJY18-05PC | CJY18-08NC CJY18-08PA CJY18-08PB CJY18-08PC | CJY18-08NACJY30-10NACJY30-15NA CJY30-10NB CJY30-10NC CJY30-10PA CJY30-10PB CJY30-10PC CJY18E-08NACJY30E-10NA | CJY30-15NB CJY30-15NC CJY30-15PA CJY30-15PB CJY30-15PC CJY30E-15NA | |
| Standard type | CJY08E-01NA|CJY08E-02NA CJY12E-02NB CJYECY8E02Y2NC CJY08E-01PB CJY08E-02PB | CJY12E-02PB CJY12E-02PC CJY12E-04PC | CJY12E-04NB CJY12E-04NC CJY12E-04PB | CJY18E-05NB CJY18E-05NC CJY18E-05PB CJY18E-05PC | CJY18E-08NB CJY18E-08NC CJY18E-08PB CJY18E-08PC | CJY30E-10NB CJY30E-10NACJY30-15NC CJY30E-10PB CJY30E-10PC | CJY30E-15NB CJY30E-15PB CJY30E-15PC | |||
| Sensing distance Hysteresis | 1mm 2mm | 2mm | 4mm Max.10% of sensing distance | 5mm 8mm | 10mm | 15mm | ||||
| Standard sensing target | 8×8x1m | 12×12×1mm | 1818ox1m | 25×25×1m | 30×30×1m | 45×45×1mm | ||||
| Setting distance | 0~0.8mm 0~1.4mm | 0~1.4mm 0~2.8mm | 0~3.5mm | 0~5.6mm | 0~7mm | 0~10.5mm | ||||
| Power supply | ||||||||||
| (Operating voltage) Leakage current | 12-24VDC (10-30VDC) | |||||||||
| Response frequency (※1) | 1000Hz | 1000Hz | 1000Hz | Max.10mA 500Hz | 350Hz | 200Hz | ||||
| Residual voltage | ||||||||||
| Affection by Temp. | Max. 1.0V | |||||||||
| Control output | Max.±10% for sensing distance at ambient temperature 20℃ | |||||||||
| Insulationresistance | Max.200mA | |||||||||
| Dielectric strength | Min.50MΩ(at 500VDC megger) | |||||||||
| Vibration | 1500VAC50/60Hzfor1minute | |||||||||
| Shock | 1mmamplitude at frequency of10to 55Hz(for1min.)ineachofX,Y,Zdirections for2 hours | |||||||||
| Indicator | 500m/s2(approx.50G)X,Y,Z directions for3 times Operation indicator(red LED) | |||||||||
| Ambient temperature | -25~+70℃ (No icing) | |||||||||
| Storage temperature | -30~+80C (No icing) | |||||||||
| Ambient humidity | 35~95%RH(No condensation) | |||||||||
| Protection circuit | Surge protection circuit,Reverse polarity protection circuit, Overcurrent protection circuit | |||||||||
| Material High-end | 2.8,3P2m | Case/Nut:NickelplatedBrass,Washer:Nickelplated lron,Sensingsurface:PBStandardcable(Grey):Polyinyl | chloride(PVC), Oil resistant cable(Black):Oil resistant Polyvinyl chloride(PVC) 3.8,3P,4P2m | |||||||
| 0.1w.22re (AWG22r Insulator diameter:Φ1.25) | ||||||||||
| 2.8,3P,1.5m Standard | 3.8,3P,4P1.5m | 4.8,3P,4P1.5m | ||||||||
| Protection | IP67 | |||||||||
