该页无缩略图
ModelNumberStructure
Features
Insidesurge protection,reverse polarityprotection ■Longuse-lifecycleandhighreliability，easyinstall,enconomicprice ■RedLEDstatusindication,easytoconfirmworksituation ■Protectionstructure IP65(IECstandard)
| Item | Code | Description |
| ① Company code | C | Company code |
| ② Product name | R | Capacitve proximity sensor |
| ③ Shape of shell | Y | Cylinder-shaped |
| ④ Dimension code | 18 | 18=M18 |
| ⑤ Product type | Without | High-end type |
| ⑥ Detection distance | 05 | 05=5mm |
| ⑦Output mode | K | AC2wires |
| L | DC 2wires | |
| P | PNP3wires | |
| N | NPN 3wires | |
| ③Output state | A | NO |
| B | NC | |
| C | NO+NC | |
| Without | Without: Lead wire | |
| ③Connection | T | Plug-in |
| R | Wiring leads Plug-in |
Specifications
DC 3wire type
| Model | CRY12-02NA CRY12-02NB CRY12-02PB | CRY12-04NA CRY12-04NB CRY12-04PB | CRY18-05NA CRY18-05NB CRY18-05NC CRY18-05PB CRY18-05PC | CRY18-08NA CRY18-08NB CRY18-08NC CRY18-08PB CRY18-08PC | CRY30-10NA CRY30-10NB CRY30-10NC CRY30-10PB CRY30-10PC | CRY30-15NA CRY30-15NB CRY30-15PC CRY30-15PB CRY30-15PC |
| Sensing distance | 2mm | 4mm | 5mm | 8mm | 10mm | 15mm |
| Hysteresis | Max.10% of sensing distance | |||||
| Setting distance | 0~1.4mm 0~2.8mm | 0~3.5mm | 0~5.6mm | 0~7mm | 0~10.5mm | |
| Power supply (Operating voltage) | 12-24VDC (10-30VDC) | |||||
| Leakagecurrent | Max.10mA | |||||
| Response frequency (1) | 50Hz | |||||
| Residual voltage | Max. 1.0V | |||||
| Affection by Temp. | Max.±10% for sensing distance at ambient temperature 20℃ | |||||
| Control output | Max.200mA | |||||
| Insulation resistance | Min.50MΩ(at 500VDC megger) | |||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | |||||
| Vibration | 1mmamplitude at frequencyof 10 to 55Hz(for1 min.)ineach of X,Y,Z directions for 2 hours | |||||
| Shock | 500m/s²(approx.5G)XYZirectionsforimes Operation indicator(redLED) | |||||
| Indicator | -25~+60℃ (No icing) | |||||
| Ambient temperature | -30~+80℃ (No icing) | |||||
| Storage temperature | 35~95%RH (No condensation) | |||||
| Ambient humidity | Surgeprotectioncircuit,Overcurrent protection circuit | |||||
| Protection circuit Material | Case/Nut:ABS,Washer:Plastic,Sensingsurface:PB,Standardcable(Gray):Polyvinylhloride(PVC),Oilistant | |||||
| cable(Black):Oil resistantPolyvinylchloride(PVC) 3.8,3P,2m 4.8,3P,4P2m | ||||||
| Cable Protection | AWG22C | |||||
| (AWG22,Core diameter: 0.1mm,Number of cores: 30, Insulator diameter: 1.25 IP65 | ||||||
Specifications
AC2wire type
| Model | CRY18-05KA | CRY18-08KA | CRY30-10KA | CRY30-15KA |
| Sensing distance | 5mm | 8mm | 10mm | 15mm |
| Hysteresis | Max.10% of sensing distance | |||
| Setting distance | 0~3.5mm | 0~5.6mm | 0~7mm | 0~10.5mm |
| Power supply (Operating voltage) | 90-250VAC | |||
| Leakagecurrent | Max.10mA | |||
Specifications
AC2wire type
| Model | CRY18-05KA | CRY18-08KA | CRY30-10KA | CRY30-15KA |
| Response frequency (1) | 50Hz | |||
| Residual voltage | Max.10V | |||
| Affection by Temp. | Max.±10% for sensing distance at ambient temperature 20℃ | |||
| Control output | Max.200mA | |||
| Insulationresistance | Min.50MΩ(at 500VDC megger) | |||
| Dielectricstrength | 1500VAC50/60Hzfor1minute | |||
| Vibration | 1mmamplitudeat frequencyof10 to 55Hz(for1min.)ineach ofX,Y,Zdirections for2hours | |||
| Shock | 500m/s²(approx.5oG)X,YZdirectionsfor3times | |||
| Indicator | Operationindicator(redLED) | |||
| Ambient temperature | -25~+60℃ (No icing) | |||
| Storage temperature | -30~+80℃ (No icing) | |||
| Ambient humidity | 35~95%RH(Nocondensation) | |||
| Protection circuit | Surge protection circuit, | |||
| Material | Case/Nut:ABS,Sensing surface:PBT,Standard cable(Gray):Polyvinylchloride(PVC),Oil resistantcable(Black):Oil resistantPolyvinylchloride(PVC) | |||
| Cable | 4.8,2P,2m | |||
| (AWG22,Core diameter:0.1mmNumberof cores:30,Insulatordiameter:1.25 | ||||
| Protection | IP65 | |||
AppearanceandDimension
Features
Insidesurgeprotection,reversepolarityprotection ■Longuse-lifecycleandhighreliability,easyinstall,enconomicprice ■RedLEDstatusindication,easytoconfirmworksituation ■Protectionstructure IP65(IECstandard)
ModelNumberStructure
| Item | Code | Description |
| ① Company code | C | Company code |
| ②Product name | M | Analog proximity sensor |
| ③ Shape of shell | Y | Cylinder-shaped |
| ④ Dimension code | 30 | 30=M30 |
| ⑤ Product type | Without | High-end type |
| E | Standard type | |
| ⑥Detection distance | 15 | 15=15mm |
| ⑦ Output mode | U | Voltagemode |
| 1 | Current mode | |
| ③Output state | A | NO |
| B | NC | |
| C | NO+NC | |
| ③ Connection | Without | Without: Lead wire |
| T | Plug-in | |
| R | Wiring leads Plug-in |
Specifications
| Model | CMY18-08U | CMY30-15U | CMF40-20U | CMF48-20U |
| Sensing distance | 1-8mm | 1-15mm | 1-20mm | 1-20mm |
| Hysteresis | 3-20% | |||
| Powertingyoltage) | 15-30VDC | |||
| Affection by Temp. | Max.±10% for sensing distance atambienttemperature 20℃ | |||
| Control output | Output voltage/Current output | |||
| Insulation resistance | Min.50MΩ(at500VDC megger) | |||
| Dielectric strength | 1500VAC 50/60Hz for1minute | |||
| Vibration | 1mmamplitudeatfrequencyof10to 55Hz(for1min.)ineachofX,Y,Zdirectionsfor2hours | |||
| Shock | 500m/s²(approx.50G)X,Y,Z directions for 3 times | |||
| Indicator | Operation indicator(red LED) | |||
| Ambienttemperature | -15~+55℃ (No icing) | |||
| Storagetemperature | -15~+55℃ (No icing) | |||
| Ambient humidity | 35~95%RH (No condensation) | |||
| Protection circuit | Surge protection circuit, Overcurrent protection circuit | |||
| Material | Case/Nut:Plastic,Washer:lastic,Sensingsurface:PBT,Standardcable(Gray):Polyvinylchloride(PVC),Oilisant cable(Black):Oil resistantPolyvinylchloride(PVC) | |||
| 3.8,2P,2m | 4.8,2P,2m | |||
| Cable | (AWG22, Core diameter:0.1mm,Numberof cores: 25, Insulator diameter:1.25 | (AWG22,Core diameter:0.1mm,Numberof cores: 30, | ||
| Insulator diameter:1.25 IP65 | ||||
AppearanceandDimension
ModelNumberStructure
Features
■Inside surge protection,reverse polarityprotection ■Longuse-lifecycleand highreliability,easyinstall,enconomic price ■RedLEDstatusindication,easytoconfirmworksituation ■Protection structure IP67(IEC standard)
| Item | Code | Description |
| ① Company code | C | Company code |
| ② Product name | H | Hall sensor |
| ③ Shape of shell | Y | Cylinder-shaped |
| ④ Dimension code | 08 | 08=M08 |
| ⑤Product type | Without | High-end type |
| ⑥ Detection distance | 10 | 10=10mm |
| ? Output mode | P | PNP 3wires |
| N | NPN 3wires | |
| A | NO | |
| ③Output state | B | NC |
| C | NO+NC | |
| Without | Without: Lead wire | |
| T | Plug-in | |
| ③Connection | R | Wiring leads Plug-in |
Specifications
| Model | CHY08-10NA CHY08-10PA CHY12-10NeG | ||||
| 10mm | CHY12-10PC 10mm | CHY1810N6 CHY18-10PC 10mm | |||
| Sensing distance Hysteresis | 3-20% | ||||
| Consumption current | Max. 10mA | ||||
| Power supply | 6-36VDC | ||||
| (Operating voltage) Response frequency | 1000Hz | ||||
| Residual voltage | Max. 1V | ||||
| Affection by Temp. | Max.±10% for sensing distance at ambient temperature 20℃ | ||||
| Control output | Max.200mA | ||||
| Insulationresistance | Min.50MΩ(at500VDC megger) | ||||
| Dielectric strength | 1500VAC50/60Hz for1minute | ||||
| Vibration | 1mmamplitudeatfrequencyof10 to 55Hz(for1min.)ineachofX,Y,Zdirections for2hours | ||||
| Shock | 500m/s²(approx.50G)X,Y,Z directions for 3 times | ||||
| Indicator | Operation indicator(red LED) | ||||
| Ambient temperature | -15~+55℃ (No icing) | ||||
| Storage temperature | -15~+55℃ (No icing) | ||||
| Ambient humidity | 35~95%RH (No condensation) | ||||
| Protection circuit | Surge protection circuit, Overcurrent protection circuit | ||||
| Material | aeut | ||||
| Cable | Φ2.8,3P,2m Φ3.8,3P,4P2m 4.8,3P,4P2m | ||||
| of cores:22, Insulator diameter:Φ1.25 | ofcores:25,Insulatordiameter:1.25 | (AWG22Coreerr2oreerr2oeer | |||
| IP67 | of cores:30, Insulatordiameter:Φ1.25 | ||||
| Protection | |||||
AppearanceandDimension
ModelNumberStructure
Features
■Insidesurgeprotection,reversepolarityprotection ■Longuse-lifecycleandhighreliabilityeasyinstall,enconomicprice ■RedLEDstatusindication,easytoconfirmworksituation ■Protection structure IP67(IEC standard)
| Item | Code | Description |
| ① Company code | C | Company code |
| ② Product name | X | Magnetic sensor |
| ③ Shape of shell | Y | Cylinder-shaped |
| ④ Dimension code | 12 | 12=M12 |
| ⑤Product type | Without | High-end type |
| ⑥ Detection distance | 10 | 10=10mm |
| ⑦Output mode | K | AC2wires |
| L | DC2wires | |
| ③Output state | A | NO |
| B | NC | |
| C | NO+NC | |
| ③ Connection | Without | Without: Lead wire |
| T | Plug-in | |
| R | Wiring leads Plug-in |
Specifications
| Opeeeations | CXY18-10LA CXF18-10LA | ||||
| Model | CXY08-10LA 10mm | CXY12-10LA 10mm | 10mm | 10mm | |
| Sensing distance | 3-20% | ||||
| Hysteresis | |||||
| Consumption current Powersupply | Max.10mA | ||||
| (Operating voltage) | 12-240VDC/AC | ||||
| Response frequency | 100Hz | ||||
| Residual voltage | Max. 3V | ||||
| Affection by Temp. | Max.±10% for sensing distanceat ambient temperature 20℃ | ||||
| Control output | Max.200mA Min.50MΩ(at 500VDC megger) | ||||
| Insulationresistance | 1500VAC 50/60Hz for 1minute | ||||
| Dielectric strength | |||||
| Vibration | 1mmamplitudeatfrequencyof10 to55Hz(for1min.)ineachofX,Y,Zdirections for2hours | ||||
| Shock Indicator | 500m/s(approx.5oG)XYZdirectionsfor3times Operation indicator(redLED) | ||||
| Ambient temperature | -15~+55℃ (No icing) | ||||
| Storage temperature | -15~+55℃ (No icing) | ||||
| Ambient humidity | 35~95%RH (No condensation) | ||||
| Protection circuit | Surge protection circuit | ||||
| Material | Case/NutNicelltedrrcklteonsisntiadardbe(Gray:Plyvi | ||||
| Cable | Φ2.8,2P,2m (AWG22,Core diameter | Φ3.8,2P,2m (AWG22,Core diameter: | Φ4.8,2P,2m (AWG22, Core diameter: 0.1mm, Number of cores:30, | ||
| 0.1mm,Numberofcoe:22, Insulator diameter:1.25 | 0.1mm,Numberof cores:25, Insulator diameter.1.25 | Insulatordiameter:1.25 | |||
| Protection | IP67 | ||||
AppearanceandDimension
CGY Photoelectric Sensor Cylindrical Type
C CE△U
Features
Darkgreymark for standard type ■Blue greenmarkforhigh-endtype
Exclusivelydesigned ICforimprovinganti-jammingcapability Insidesurgeprotection,reversepolarityprotection Longuse-lifecycleandhighreliability，easyinstall,enconomicprice RedLEDstatusindication,easytoconfirmworksituation ■Protectionstructure IP65(IECstandard)
ModelNumberStructure
| Item | Code | Description |
| ① Company code | C | Companycode |
| ②Product name | G | Photoelectric sensor |
| ③ Shape of shell | Y | Cylinder-shaped |
| ④ Dimension code | 18 | 18=M18 |
| ⑤Product type | Without | Without =High-end type (Dark grey) |
| E | E=Standard type(Ricewhite) | |
| ⑥ Installation form | D | Diffuse-reflective type |
| R | Retro-reflective type | |
| T | Through-bethod type | |
| ⑦Detection distance | 2 | 2=2m |
| ⑧Output mode | K | AC2wires |
| P | PNP 3wires | |
| N | NPN 3wires | |
| ⑨Output state | J | Relay |
| A | NO | |
| B | NC | |
| C | NO+NC | |
| Without | Without: Lead wire | |
| Plug-in | ||
| 10 Connection | T R | Wiring leads Plug-in |
Note:Shellnutscanbecustomizednickelplatedbassmaterialproductmodelplus(-B),example:CGY8-JC-B.
CGY Photoelectric Sensor CylindricalType
Specifications
| Diffuse-reflectivetype | ||||||||||
| Model | High-end type | CGY12-D05NA CGY12-D05NB CGY12-D05PA CGY12-D05PB | CGY12-D10NA CGY12-D10NB CGY12-D10PA CGY12-D10PB | CGY18-D10NA CGY18-D10NB CGY18-D10NC CGY18-D10PA CGY18-D10PB CGY18-D10PC CGY18-D10KA | CGY18-D30NA CGY18-D30NB CGY18-D30NC CGY18-D30PA CGY18-D30PB CGY18-D30PC CGY18-D30KA | CGY30-D50NA CGY30-D50NB CGY30-D50NC CGY30-D50PA CGY30-D50PB CGY30-D50PC CGY30-D50KA | CGY30-D70NA CGY30-D70NB CGY30-D70NC CGY30-D70PA CGY30-D70PB CGY30-D70PC CGY30-D70KA | |||
| Standard type | CGY12E-D05NA CGY12E-D05NB CGY12E-D05PA CGY12E-D05PB | CGY12E-D10NA CGY12E-D10NB CGY12E-D10PA CGY12E-D10PB | CGY18-D10KNBA CGY18E-D10NB CGY18E-D10NC CGY18E-D10PA CGY18E-D10PB CGY18E-D10PC CGY18E-D10KA | CGY18E-D3KBA CGY18E-D30NB CGY18E-D30NC CGY18E-D30PA CGY18E-D30PB CGY18E-D30PC CGY18E-D30KA | CGY30-D50KB CGY30E-D50NB CGY30E-D50NC CGY30E-D50PA CGY30E-D50PB CGY30E-D50PC CGY30E-D50KA | CGY30-D70KB | CGY30E-D70NB CGY30E-D70NC CGY30E-D70PA CGY30E-D70PB CGY30E-D70PC CGY30E-D70KA | |||
| Sensing distance Hysteresis | 5cm | (Adustable) | CGY18E-D10KB 10cm 3-20% | CGY18E-D30KB (Adjusable) | CGY30E-D50KB | 50cm | CGY30E-D70KB (Adustable) | |||
| Light source | ||||||||||
| Consumption current | InfraredLED(880nm) | |||||||||
| Power supply | Max.25mA | |||||||||
| (Operating voltage) | 10-30VDC/90-250VAC | |||||||||
| Response time | ||||||||||
| Residual voltage | DCMax.1V/ACMax.10V | |||||||||
| Control output | Max.±10% forsensing distanceatambient temperature 20℃ | |||||||||
| Insulation resistance | Max.200mA Min.50MΩ(at 500VDC megger) | |||||||||
| Dielectric strength | 1500VAC50/60Hz for1minute | |||||||||
| Vibration | ||||||||||
| Shock | 500m/s²(approx.5oG)X,Y,Z directions for3 times | |||||||||
| Indicator | Operation indicator(red LED) | |||||||||
| Ambient temperature | -15~+55℃C (No icing) | |||||||||
| Storage temperature | -15~+55℃ (No icing) | |||||||||
| Ambient humidity | 35~95%RH(No condensation) | |||||||||
| Protection circuit | Surgeprotectioncircuit,Overcurrent protection circuit | |||||||||
| Material | Case/NutAensingsrce:Paanlyycyiide(),OiesisantableBack) | |||||||||
| Cable | 3.8,3P2m | |||||||||
| High-end typeG22Coredmeter:.mumber | 4.8,2P,3P,4P2m (AWG22,Core diameter:0.1mm,Numberof cores:30,Insulator diameter:1.25 | |||||||||
| ofcores:25Insulatordiameter:1.25 3.8,3P1.5m | Φ4.8,2P,3P,4P1.5m | |||||||||
| Saddty | (AWG22,Core diameter: 0.1mm,Number of cores: 30,Insulatordiameter:1.25 | |||||||||
| Protection | IP65 | |||||||||
CGY Photoelectric Sensor Cylindrical Type
Specifications
Retro-reflective type
| Model | High-end type | CGY12-R1NA CGY12-R1NB CGY12-R1PB | CGY18-R2NA CGY18-R2NB CGY18-R2NC CGY18-R2PA CGY18-R2PC | CGY30-R4NA CGY30-R4NB CGY30-R4NC CGY30-R4PA CGY30-R4PC | |||
| Standard type | CGY12E-R1NA CGY12E-R1NB | CGY18-R2KA CGY18-R2KB CGY18E-R2NA CGY18E-R2NB CGY18E-R2NC CGY18E-R2PA | CGY30-R4KA CGY30-R4KB CGY30E-R4NA CGY30E-R4NB CGY30E-R4NC CGY30E-R4PA | ||||
| CGY12E-R1PB | CGY18E-R2PC CGY18E-R2KA CGY18E-R2KB 2m | CGY30E-R4PC CGY30E-R4KA CGY30E-R4KB 4m | |||||
| Sensing distance | 1m | ||||||
| Hysteresis | 3-20% | ||||||
| Light source Consumption current | Infrared LED(880nm) Max.25mA | ||||||
| Powersupply | |||||||
| (Operating voltage) | 10-30VDC/90-250VAC | ||||||
| Response time | |||||||
| Reflector Residual voltage | TD02 TD08 DCMax.1V/ACMax.10V | ||||||
| Affection by Temp. | Max.±10% for sensing distanceat ambient temperature 20℃ | ||||||
| Control output | Max.200mA | ||||||
| Insulation resistance | Min.50MΩ(at 500VDC megger) | ||||||
| Dielectric strength | 1500VAC 50/60Hz for 1minute | ||||||
| Vibration Shock | 1mmamplitudeatfrequencyof10 to55Hz(for1min.)ineachofXY,Zdirections for2 hours 500m/s²approx.5oG)X,YZdirectionsforimes | ||||||
| Indicator | Operationindicator(redLED) | ||||||
| Ambient temperature | -15~+55℃ (No icing) | ||||||
| Storage temperature | -15~+55℃ (No icing) | ||||||
| Ambient humidity | 35~95%RH(No condensation) | ||||||
| Protection circuit | Surge protection circuit, Overcurrent protection circuit | ||||||
| Material | Case/NutAhrst:iids | ||||||
| Cable | High-end type | Φ3.8,3P,2m | 4.8,2P,3P,4P2m | ||||
| (AWG22,Core diameter:0.1mm,Number | (AWG22, Core diameter:0.1mm,Number of cores: 30,Insulator diameter:1.25 | ||||||
| of cores:25,Insulatordiameter:1.25 Φ3.8,3P,1.5m | |||||||
| Standard type Protection | (AWG22,orediameter:0.1mmuber ofcores:25,Insulatordiameter:1.25 | ||||||
CGY Photoelectric Sensor Cylindrical Type
Specifications
| Through-bethodtype | ||||||||||
| type | High-end | CGY12-T3NA CGY12-T3NB CGY12-T3PA CGY12-T3PB | CGY18-T5NA CGY18-T5NB CGY18-T5NC CGY18-T5PA CGY18-T5PB CGY18-T5PC CGY18-T5KA | CGY18-T10NA CGY18-T10NB CGY18-T10NC CGY18-T10PA CGY18-T10PB CGY18-T10PC CGY18-T10KA | CGY30-T10NA CGY30-T10NB CGY30-T10NC CGY30-T10PA CGY30-T10PB CGY30-T10PC CGY30-T10KA | CGY30-T15NA CGY30-T15NB CGY30-T15NC CGY30-T15PA CGY30-T15PB CGY30-T15PC CGY30-T15KA | ||||
| Model | Standard type | CGY12E-T3NA CGY12E-T3NB CGY12E-T3PA CGY12E-T3PB | CGY18-T5KB CGY18E-T5NA CGY18E-T5NB CGY18E-T5NC CGY18E-T5PA CGY18E-T5PB CGY18E-T5PC CGY18E-T5KA | CGY18-T10KB CGY18E-T10NA CGY18E-T10NB CGY18E-T10NC CGY18E-T10PA CGY18E-T10PB CGY18E-T10PC CGY18E-T10KA | CGY30-T10KB CGY30E-T10NA CGY30E-T10NB CGY30E-T10NC CGY30E-T10PA CGY30E-T10PB CGY30E-T10PC CGY30E-T10KA | CGY30-T15KB CGY30E-T15NA CGY30E-T15NB CGY30E-T15NC CGY30E-T15PA CGY30E-T15PB CGY30E-T15PC | ||||
| Sensing distance | 3m | CGY18E-T5KB 5m | CGY18E-T10KB 10m | CGY30E-T10KB 10m | CGY30E-T15KA CGY30E-T15KB 15m | |||||
| Hysteresis Light source | 3-20% | |||||||||
| Infrared LED(880nm) | ||||||||||
| Consumption current | Max.40mA | |||||||||
| Power singvoltage) | 10-30VDC/90-250VAC | |||||||||
| Response time | ||||||||||
| Residual voltage | DCMax.1V/ACMax.10V | |||||||||
| Affection by Temp. | ||||||||||
| Control output | Max.200mA | |||||||||
| Insulation resistance | Min.50MΩ(at 500VDC megger) | |||||||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | |||||||||
| Vibration | 1mmamplitude at frequencyof 10 to 55Hz(for1min.) in each ofX,Y,Zdirections for2 hours | |||||||||
| Shock Indicator | 500m/s2(approx.50G)X,Y,Zdirections for3times Operationindicator(redLED) | |||||||||
| Ambient temperature | -15~+55℃ (No icing) | |||||||||
| Storage temperature | -15~+55℃ (No icing) | |||||||||
| Ambient humidity | 35~95%RH (No condensation) | |||||||||
| Protection circuit | Surge protection circuit, Overcurrent protection circuit | |||||||||
| Material | CaseNutA | |||||||||
| Cable | High-end type | 3.8,3P,2m (AWG22,Corediamter | ||||||||
| 0.1mm，Nurof:25 Insulator diameter:1.25 | (AWG22,Core diameter: 0.1mm,Number of cores:30, Insulator diameter:1.25 | |||||||||
| 3.8,3P,1.5m taddte | Φ4.8,2P3P,4P1.5m (AWG22,Corediameter:0.1mmNumberofcores:30,Insulatordiameter:1.25 | |||||||||
| Protection | Insulator diameter:1.25 | |||||||||
AppearanceandDimension
AppearanceandDimension
ModelNumberStructure
■Blackmarkforstandard type ■Dark greymark for high-end type
Features
ExclusivelydesignedICforimprovinganti-jammingcapability ■Insidesurgeprotection,reversepolarityprotection ■Longuse-lifecycleandhighreliability，easyinstallenconomicprice ■RedLEDstatusindication,easytoconfirmworksituation ■Protection structure IP65(IEC standard)
| Item | Code | Description |
| ① Company code | C | Company code |
| ② Product name | G | Photoelectric sensor |
| ③Shape of shell | F | Square |
| ④ Dimension code | 50 | 50=Square 50 |
| ⑤ Product type | Without | Without=High-end type (Dark grey shell) |
| E | E=Standard type (Blackshell) | |
| ③ Installation form | D | Diffuse-reflective type |
| R | Retro-reflective type | |
| T | Through-bethod type | |
| ⑦ Detection distance | 4 | 4=4m |
| ⑧Output mode | K | AC2wires |
| P N | PNP 3wires | |
| J | NPN 3wires | |
| ③Output state | Relay | |
| A | NO | |
| B | NC | |
| ① Connection | C | NO+NC |
| Without | Without: Lead wire | |
| T | Plug-in | |
| R | Wiring leads Plug-in |
CGF Photoelectric Sensor Square Type
Specifications
Diffuse-reflectivetype
| Model | High-end type Standard type | CGF50-D30JC | CGF70-D50JC | |||
| CGF50E-D30JC | CGF70E-D50JC | |||||
| Sensing distance | 30cm(adjustable) | 50cm(adjustable) | ||||
| Hysteresis | 3-20% | |||||
| Light source | Infrared LED (880nm) | |||||
| Consumption current | Max.25mA | |||||
| Powersupply (Operating voltage) | 24-250VDC/AC(High-end type) 10-30VDC/90-250VAC(Standardtype) | |||||
| Response time | ||||||
| Residual voltage | Max. 1V | |||||
| Affection by Temp. | Max.±10% for sensing distance at ambient temperature 20℃ | |||||
| Control output | 3A | |||||
| Insulation resistance | Min.50MΩ(at500VDC megger) | |||||
| Dielectric strength | 1500VAC 50/60Hz for 1minute | |||||
| Vibration | 1mmamplitudeat frequencyof 10 to 55Hz(for1min.)ineachofX,Y,Zdirections for2hours | |||||
| Shock | 500m/s2(approx. 50G)X,Y,Zdirections for 3 times | |||||
| Indicator | Operation indicator(red LED) | |||||
| Ambienttemperature | -15~+55℃ (No icing) | |||||
| Storage temperature | -15~+55℃ (No icing) | |||||
| Ambient humidity | 35-95%RH (No condensation) | |||||
| Protection circuit | Surge protection circuit | |||||
| Material | Case:ABS.Sensingsurace PM.tadaranablyimy:Polyvin/choriaelyc), | |||||
| Cable | High-end type | Φ3.8,3P,4P2m (AWG22,Corediameter: | Φ6,5P,2m (AWG22Coree | / | ||
| 0.1mm,urfor25, | 0.1mm,Nubrofs:22 | 1 | ||||
| Standard type | Insul.app.125) (AWG22,Coredamer 0.1mm，Numbrofos:25, | (AWG22，Coee | Insulato.1 | |||
| / | ||||||
| 0.1mm，Numberof cores:22, Insulator diameter:$1.25) | Insulatordiameter:Φ1.25) IP65 | 1 | ||||
| Protection | ||||||
CGF Photoelectric Sensor Square Type
Specifications
Diffuse-reflectivetype
| Dllltse-rellectivetype | ||||||||||
| Model | High-end type | CGF30-D30NA CGF30-D30NB CGF30-D30NC CGF30-D30PA CGF30-D30PB CGF30-D30PC | CGF50-D30NA | CGF70-D50NA CGF70-D50NB CGF70-D50NC CGF70-D50PA CGF70-D50PB CGF70-D50PC | ||||||
| CGF50-D30NB CGF50-D30NC CGF50-D30PA CGF50-D30PB | ||||||||||
| type | Standard | CGF30E-D30NB CGF30E-D30NC CGF30E-D30PA CGF30E-D30PB CGF30E-D30PC | CGF50E-D30NC CGF50E-D30PA CGF50E-D30PB | CGF50E-D30PC CGF50E-D30NB | CGF70E-D50NB CGF70E-D50NC | |||||
| CGF70E-D50PA CGF70E-D50PB CGF70E-D50PC | ||||||||||
| Sensing distance | 30cm(Adjustable) 50cm(Adjustable) | |||||||||
| Hysteresis | 3-20% | |||||||||
| Light source | Infrared LED (880nm) | |||||||||
| Consumption current | Max.25mA | |||||||||
| Powerting oltage) | 10-30VDC | |||||||||
| Response time | ||||||||||
| Residual voltage | Max.1V | |||||||||
| Affection by Temp. | Max.±10% for sensing distance at ambient temperature 20℃ | |||||||||
| Control output | Max.200mA | |||||||||
| Insulation resistance | Min.50MΩ(at 500VDC megger) | |||||||||
| Dielectric strength | 1500VAC50/60Hz for1minute | |||||||||
| Vibration | 1mmamplitudeatfrequencyof10 to55Hz(for1min.)ineachofX,Y,Zdirections for2 hours 500m/s2(approx.50G)X,Y,Z directions for3times | |||||||||
| Shock Indicator | Operation indicator(redLED) | |||||||||
| Ambient temperature | -15~+55℃ (No icing) | |||||||||
| Storage temperature | -15~+55℃ (No icing) | |||||||||
| Ambient humidity | 35~95%RH (No condensation) | |||||||||
| Protection circuit | Surge protection circuit, Overcurrent protection circuit C | |||||||||
| Material Cable | Φ3.8,3P,4P2m Φ6,3P,4P,2m | |||||||||
| H | / | |||||||||
| Standard type | (AWG22,C5riamtr:.tmm，.b)(AW22.samater:0.1mumr | 1 | ||||||||
| Protection | IP65 | |||||||||
CGF Photoelectric Sensor Square Type
Specifications
Retro-reflective type
| Model | High-end type | CGF50-R4JC | CGF70-R5JC | |||
| Standard type | CGF50E-R4JC | CGF70E-R5JC | ||||
| Sensing distance | 4m | 5m | ||||
| Hysteresis | 3-20% | |||||
| Light source | Infrared LED (880nm) | |||||
| Consumption current | Max.25mA | |||||
| Power supply (Operating voltage) | 24-250VDC/AC(High-end type) 10-30VDC/90-250VAC(Standard type) | |||||
| Response time | ||||||
| Reflector | TD08 | |||||
| Residual voltage | Max. 1V | |||||
| Affection by Temp. | Max.±10% for sensing distanceat ambient temperature 20℃ | |||||
| Control output | 3A | |||||
| Insulation resistance | Min.50MΩ(at 500VDC megger) | |||||
| Dielectric strength | 1500VAC 50/60Hz for 1minute | |||||
| Vibration | 1mmamplitude at frequencyof10 to 55Hz(for1min.)ineachofX,Y,Zdirections for2 hours | |||||
| Shock | 500m/s2(approx.50G)X,Y,Zdirections for 3times | |||||
| Indicator | Operation indicator(red LED) | |||||
| Ambient temperature | -15~+55℃ (No icing) | |||||
| Storage temperature | -15~+55C (No icing) | |||||
| Ambient humidity | 35~95%RH (No condensation) | |||||
| Protection circuit | Surge protection circuit, | |||||
| Material | ||||||
| 3.8,3P,4P2m | 6,5P,2m | / | ||||
| Cable | High-end type | AWG22or Insulator diameter:Φ1.25) | W22Cor Insulator diameter:1.25 | / | ||
| Standard type | 3.8,3P,4P1.5m W22Cor | Φ6,5P,1.5m W2Cor | / | |||
| Protection | Insulator diameter:Φ1.25) | Insulator diameter:1.25 IP65 | ||||
CGF Photoelectric Sensor Square Type
Specifications
Retro-reflective type
| CGF30-R1NB | CGF30-R1NA | CGF50-R4NA CGF50-R4NB | CGF70-R5NA CGF70-R5NB | |||
| Model | High-end type | CGF30-R1NC CGF30-R1PB CGF30-R1PCA | CGF50-R4NC CGF50-R4PB CGF50-R4PC CGF50E-R4NB | CGF70E-R5NB | CGF70-R5NC CGF70-R5PB CGF70-R5PC | |
| Standard type | CGF30E-R1NB CGF30E-R1NA CGF30E-R1PB CGF30E-R1PC | CGF50E-R4NC CGF50E-R4PB CGF50E-R4PC | 5m | CGF70E-R5NC CGF70E-R5PB CGF70E-R5PC | ||
| Sensing distance Hysteresis | 1m 4m | 3-20% | ||||
| Light source | Infrared LED(880nm) | |||||
| Consumption current | Max. 25mA | |||||
| Popertingvoltage) | ||||||
| 10-30VDC | ||||||
| Response time | ||||||
| High-end type Reflector Standard type | TD08 TD09 TD05 | |||||
| Residual voltage | Max. 1V | |||||
| Affection by Temp. | ||||||
| Control output | Max.± 10% for sensing distance at ambient temperature 20℃ Max.200mA | |||||
| Insulationresistance | Min.50MΩ(at 500VDC megger) | |||||
| Dielectric strength | 1500VAC50/60Hz for1minute | |||||
| Vibration | 1mmamplitudeatfrequencyof10to 55Hz(for1min.)ineachofX,Y,Zdirections for2hours | |||||
| Shock | 500m/s(approx.5oG)X,YZdirections for3times | |||||
| Indicator | Operation indicator(red LED) | |||||
| Ambienttemperature | -15~+55℃ (No icing) | |||||
| Storage temperature | -15~+55C (No icing) | |||||
| Ambient humidity | 35~95%RH(No condensation) | |||||
| Protection circuit | Surge protection circuit, Overcurrent protection circuit | |||||
| Material | CaseAs Φ3.8,3P,4P2m / | |||||
| Cable | High-end type | 0.w22orelame Insulatordiameter:1.25) | Φ6,3P,4P,2m 0.4W22Cora | |||
| Standard type | 3.8,3P,4P1.5m | Insulatordiameter:Φ1.25 Φ6,3P,4P,1.5m .W22Core | / | |||
| Insulatordiameter:Φ1.25) | Insulatordiameter:Φ1.25 | / | ||||
| Protection | IP65 | |||||
CGF Photoelectric Sensor Square Type
Specifications
Through-bethodtype
| Model | High-end type Standard type | CGF50-T10JC | CGF70-T15JC | |||
| CGF50E-T10JC | CGF70E-T15JC | |||||
| Sensing distance | 10m | 15m | ||||
| Hysteresis | 3-20% | |||||
| Light source | Infrared LED (880nm) | |||||
| Consumption current | Max.50mA 24-250VDC/AC(High-end type) | |||||
| Power supply (Operating voltage) | 10-30VDC/90-250VAC(Standard type) | |||||
| Response time | ||||||
| Residual voltage | Max. 1V | |||||
| Affection by Temp. | Max.±10% for sensing distance at ambient temperature 20℃ | |||||
| Control output | 3A | |||||
| Insulation resistance | Min.50MΩ(at 500VDC megger) | |||||
| Dielectric strength | 1500VAC50/60Hz for1minute | |||||
| Vibration | 1mmamplitudeat frequencyof10 to55Hz(for1min.)ineachofX,Y,Zdirections for2 hours 500m/s²(approx.50G)X,Y,Z directions for3times | |||||
| Shock | ||||||
| Indicator | Operation indicator(red LED) | |||||
| Ambient temperature | -15~+55℃ (No icing) | |||||
| Storage temperature | -15~+55℃ (No icing) | |||||
| Ambient humidity | 35~95%RH (No condensation) | |||||
| Protection circuit | Surge protection circuit | |||||
| Material | Case:ABS,Sensing surface:PMMA,Standardcable(Gray):Polyvinyl chloride(PVC), Oil resistantcable(Black):Oil resistant Polyvinyl chloride(PVC) | |||||
| Cable | High-end type | 3.8,3P,4P2m 0.1AW22r | Φ6,5P,2m .1MW22r | / | ||
| Standard type | Insulator diameter:Φ1.25) 3.8,3P,4P1.5m 0.1W22Core | Insulatordiameter:Φ1.25 Φ6,5P,1.5m .(AWG22.Corediam | / | |||
| Insulatordiameter:Φ1.25) | Insulatordiameter:Φ1.25 | 1 | ||||
| Protection | IP65 | |||||
CGF Photoelectric Sensor Square Type
Specifications
Through-bethod type
| Tirougn-behodtype | CGF30-T5NA CGF70-T15NA | |||||
| High-end type Model | CGF30-T5NB CGF30-T5NC CGF30-T5PA CGF30-T5PB CGF30-T5PC CGF30E-T5NA | CGF50-T10NA CGF50-T10NB CGF50-T10NC CGF50-T10PA CGF50-T10PB CGF50-T10PC CGF50E-T10NA | CGF70-T15NB CGF70-T15NC CGF70-T15PA CGF70-T15PB CGF70-T15PC CGF70E-T15NA | |||
| Standard type | CGF30E-T5NB CGF30E-T5NC CGF30E-T5PA CGF30E-T5PB CGF30E-T5PC | CGF50E-T10NB CGF50E-T10NC CGF50E-T10PA CGF50E-T10PB | CGF70E-T15NB CGF70E-T15NC CGF70E-T15PA CGF70E-T15PB CGF70E-T15PC 15m | |||
| Sensing distance | 5m | CGF50E-T10PC 10m | ||||
| Hysteresis | 3-20% | |||||
| Light source | Infrared LED (880nm) | |||||
| Consumption current | Max. 40mA | |||||
| Powersng voltage) | 10-30VDC | |||||
| Response time | ||||||
| Residual voltage | Max. 1V | |||||
| Affection by Temp. | Max.± 10% for sensing distance at ambient temperature 20C | |||||
| Control output | Max.200mA | |||||
| Insulation resistance | Min. 50MΩ(at 500VDC megger) | |||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | |||||
| Vibration | 1mmamplitudeatfrequencyof10 to 55Hz(for1min.)ineachofX,Y,Zdirections for2hours 500m/s²(approx.5oG)X,Y,Zdirections for3 times | |||||
| Shock Indicator | Operation indicator(red LED) | |||||
| Ambient temperature | -15~+55℃ (No icing) | |||||
| Storage temperature | -15~+55℃ (No icing) | |||||
| Ambient humidity | 35~95%RH(No condensation) | |||||
| Protection circuit | Surgeprotectioncircuit, Overcurrent protection circuit | |||||
| Material | Case:ABSS | |||||
| Cable | Φ3.8,3P,4P2m 6,2P,3P,4P,2m | |||||
| / | ||||||
| Protection | Standrdtye IP65 | |||||
AppearanceandDimension
AppearanceandDimension
AppearanceandDimension
ModelNumberStructure
Features
■Blackmarkforstandardtype ■Darkgreymarkforhigh-endtype
Exclusivelydesigned ICfor improvinganti-jammingcapability ■Insidesurge protection,reverse polarityprotection ■Longuse-lifecycleandhighreliabilityeasyinstall,enconomicpice ■RedLEDstatusindication,easytoconfirmworksituation ■Protection structure IP65(IEC standard)
| Item | Code | Description |
| ① Company code | C | Company code |
| ② Product name | G | Photoelectric sensor |
| ③ Shape of shell | U | U type |
| ④ Dimension code | 07 | 7mmGroovewidth7mm |
| ⑤ Product type | Without | Without=High-end type (Dark grey shell) |
| E | E=Standard type (Black shell) | |
| Detection distance | 07 | 7=7mm |
| ⑦Output mode | K | AC2wires |
| P | PNP3wires | |
| N | NPN3wires | |
| J | Relay | |
| ③Output state | A | NO |
| B | NC | |
| ③Connection | C | NO+NC |
| Without | Without:Leadwire | |
| T | Plug-in | |
| R | Wiring leads Plug-in |
Specifications
| Model | High-end type | CGU07-07NA CGU07-07NB CGU07-07NC | CGU10-10NA CGU10-10OPA | CGU30-30NA CGU30-30NB CGU30-30NC CGU30-30PB | CGU50-50NA CGU50-50NB CGU50-50NC CGU50-50PB | ||
| Standard type | CGU07-07PB CGU07-07PC CGU07E-07NA CGU07E-07NB CGU07E-07NA | CGU10-10PB CGU10E-10NA CGU10E-10NB | CGU30-30PC CGU30E-30NA CGU30E-30NB CGU30E-30NC | CGU50-50PC CGU50E-50NA CGU50E-50NB CGU50E-50NC | |||
| CGU07E-07PB CGU07E-07PC 7mm | CGU10E-10PB 10mm | CGU30E-30PB CGU30E-30PC 30mm | CGU50E-50PB CGU50E-50PC 50mm | ||||
| Sensing distance | |||||||
| Light source Consumption current | InfraredLED (Modulation) Max. 15mA | ||||||
| Powersupply | |||||||
| (Operatingvoltage) | 10-30VDC | ||||||
| Response time | |||||||
| Residual voltage | Max. 1V | ||||||
| Affection by Temp. | Max.±10% forsensingdistanceatambient temperature20℃ | ||||||
| Control output | Max.200mA Min.50MΩ(at500VDC megger) | ||||||
| Insulation resistance Dielectric strength | 1500VAC 50/60Hz for1minute | ||||||
| Vibration | |||||||
| Shock | 1mmamplitude at frequencyof10 to 55Hz(for1min.)ineachofXY,Zdirections for2 hours 500m/s²(approx.5G)XYZdirectionsforime | ||||||
| Indicator | Operationindicator(redLED) | ||||||
| Ambienttemperature | -15~+55℃ (No icing) | ||||||
| Storage temperature | -15~+55℃ (No icing) | ||||||
| Ambient humidity | 35~95%RH(No condensation) | ||||||
| Protection circuit | Surge protection circuit, Overcurrent protection circuit | ||||||
| Material | CaseAs | ||||||
| High-end type | Φ4.8,3P,4P2m 0.W22Corfae | 3.8,3P,2m | Φ4.8,3P,4P2m | ||||
| .1WG22Corr Insulto.dap,1.5.125 | (AW2C | ||||||
| Cable Standard type | Insut4.8r,3P4P1.5m125 0.1AW22Cr | 0.w22r | 4.8,3P,4P1.5m (AWG22,Coredameter:0.mmumbrofcors30 | ||||
| Protection | Insulatordiameter:1.25 | Insulator diameter:1.25 Insulator diameter:1.25 IP65 | |||||
CGU Photoelectric Sensor U Type (High-end type)
AppearanceandDimension
AppearanceandDimension
SensorAccessories
| Memo |
Tel:+8618857728107
Wechat/Whatsapp:+8618857728107
Landlinenumber:86-0577-61803776
Email:Market@cntd.com
Add.:NO.258.Wei Eleven Road, Yueqing Economic
Development Zone,Yueqing City,Zhejiang Province，P.R.China
THECATALOGUEISFORREFERENCEONLY
\*CNTDElectricTechnologyCo.,Ltd.keepsinnovating.Theinformationinthiscatalogue isforreferenceonly.Pleasedonotuse thecatalogueasa formal installation guide.For installation,operationandmaintenanceof unconventional applications,pleaseconsultthe service personnel of CNTDElectric Technology Co.,Ltd.for furthersupport.
PROPERUSEOFPRODUCT
\*The product must be used inanenvironment ensures that the product's operating parameters donot exceed therating value.Therisksassociated with the system inwhich theproduct isusedshouldbeanalyzedand controlledbymultiplemeasures.Donot singlyuse the product insituations involving personal safetyand propertysafety suchas emergencystopdevice.
