Manufacturer of a complete set of environmentally intelligent IOT &home comfort solutions

COMPANY PROFILE

Frank company was founded in 1993. We produce valve series products and export to 78 countries around the world, shaped with the strength and potential of the international brand.

In2008, we set our sights on the domestic heating market with our main products: brass floor heating manifold, 304 food grade stainless steel manifold, duplex supply system, mixed water integrated system, exhaust valves, temperature control valves and connection fittings. We havethe most forward-looking large waterwheel typespecial machine in the world. The spirit of craftsmanship "all through my hands, will be worry-free" is present throughout every detail of our products and designs as well as decades of innovation & cooperation, excellence, qualityservice, strict control of each product, each link. Respect quality and pursue quality with heart.

Over the past 30 years, our professionalism and unremitting efforts have forged the high quality and exquisite technology of Frank's products and systems, from independent products to the perfect combination of thermostatic multiple supply systems, from manual control to the organic combination of intelligent LOT 5G. The above has made it possible for us to achieve a smart home, comfortable home, truly accurate temperature control, complex but orderly chip circuit board programming, mobile phone App small program control, with which you can enjoy simple and convenient, humanized design, low-carbon energy saving, safety and comfort, long-lasting service time.

Frank has always been passing love and warmth with the unselfish belife of doing good things and thinking of others' benefit, creating valuable systems that protect the environment and save energy for a better quality of life for society. We are commited to being a benchmark company in the industry with a sense of commitment, mission and responsibility.

Frank Company's aim: make the whole of humanity live a smart, more comfortable, healthier, happier and better life

CONTENT

rm y ae ae

e Se / emso uc tog n / trltrd

图ti Coti / iro uity

e /trolng ng/ trl

/g rom

hhhom

n / t 图tn C/ tfro g / trol

tttpy

Vils Prts Pop

HOIE HMON

5V weak power operation and automatic alarm for water leakage.

Comfort:

The unique return water temperature collection method dynamically adjusts the hydraulic balance, eliminating the problem of the ground being cold and hot due to on/off of the switching actuator of the floor heating pipe.

Intelligence:

Usinga 32-bit ARMchip with powerful and accurate computing capability, the master control, based on the collected room temperature and the corresponding return water temperature, intelligently corrects the required temperature of the corresponding room through intelligent sub-room control, based on the return water temperature of each branch, and the system can be remotely upgraded and remotely maintained: it is compatible with other smart homes.

Easy Installation:

Any automatic spool can be fitted. The parallel and modular design of the actuators eliminates the need for flow metersand differential pressure bypass valves, reduces the cost of room thermostat configurations, electrical wiring, etc. and is and the underfloor heating pipes are unaffected within the length range of 30- 120m.

Stability:

Dual control of the master control panel (wired) and APP remote control to ensure stable system operation.

Energy Saving:

The use of analogue thermostatic control, dynamically adjusting the hydraulic balance of each circuit to prevent frequent boiler start and stop and the suffocation of the water circuit system, can save energy consumption of more than 20% with the mobile phone APP artificial energy saving,

IOT + Intelligent Two-unit Thermostat Sys

FS1001 Manifolds

FS1003 Manifolds

FS1002 Manifolds

FS1004 Manifolds

FS1005Manifolds

Branch

MEASUREMENT

2F\~12F

suits:DN251"X1"

Φ20X2.0Φ20X2.3 Φ16X2.0

FS1006 Manifolds

Branch

MEASUREMENT

2F\~12F

suits:DN251"X1"

Φ20X2.0Φ20X2.3Φ16X2.0

FS1007 Manifolds

FS1008 Manifolds

Common underfloor heating and air conditioning solutions

long-lasting period of service life; solidity and durability

Eight advantages of stainless steel:
1. Excellent corrosion resistance. Superb resistance to acid and alkaline solutions. No corrosion within 100 years.

2. Large tube with sufficient flow. Smooth interior with no water resistance.
3. Highly robust, with exceptional resistance to wear and impact.

4. Strong thermal insulation performance. It's not easy to conduct heat and can reduce heat energy loss.

5. Excellent mechanical properties, with good ductility and toughness.
6. Stable material properties. It's unaffected by changes in temperature.

7. Small expansion variables and slow thermal expansion and contraction of the material.

8. Hygienic and \_environmentally friendly, no precipitation of harmful substances or hidden water hazard.

SS304 VS Brass

Technical Specifications

High Stroke Actuator

Capillary Tube Fittings
Spacing between
branches
Working Pressure
Effective Spool Stroke
Flowmete
Bracket

FS1101 Manifolds

FS1102 Manifolds

FS1104 Manifolds

FS1114 Manifolds

Branch

MEASUREMENT

2F\~12F

suits:DN25 1\*X1\*

Φ20X2.0 Φ20X2.3 Φ16X2.0

FS1115

Stainless steel cube floor heatingradiator with ball valves

Branch

MEASUREMENT

2F\~12F

suits:DN251"X1"

Φ20X2.0 Φ20X2.3 Φ16X2.0

FS1116

Brass Intelligent Floor Heating Manifolds

Branch

2F\~12F

suits:DN25 1"X1"

MEASUREMENT

FS1117

Brass Manual Floor Heating Manifolds

Φ20X2.0 Φ20X2.3 Φ16X2.0

Branch

2F\~12F

MEASUREMENT

suits:DN25 1"X1"

Φ20X2.0 Φ20X2.3 Φ16X2.0

FS1118

Brass Forged Floor Heating Manifolds with Ball Valves

Branch

2F\~10F

MEASUREMENT

suits:DN25 1"X1\*DN20 M3/4XF3/4

FS1119

Brass Floor Heating Manifolds with High Flow Ball Valves

Branch

2F\~12F

MEASUREMENT

suits:DN25 1"X1"

Φ20X2.0 Φ20X2.3 Φ16X2.0

FIVE-PROOF DISTRIBUTION MANIFOLD.

(Anti-corrosion, Anti-scaling, Anti-condensation, Anti- Heat conduction, Anti-ultra-high and ultra-low temperature)

The significant component of distribution manifold is the heart and control core in the whole heating and cooling radiation system.

At present, the main materials used at home and abroad are brass , stainless steel and synthetic plastic. All kinds of materials have their inherent advantages and disadvantages.

Metallic materials: Temperature resistant and easy to conduct; Hard and easy to scale; Corrosion resistance and easy condensation .

Resin plastic: temperature-resistant ; non-toxic; the surface is not easy to attachment ; scaling speed is very slow . It is also an ideal thermal insulation material, however it is relatively short In news cycle, soft and low strength In strength, easy to degrade, and poor in environmental stress cracking.

So how to remove the false and retain the true, and take the advantages of each material

For this target , Tsinghua Changshan Yangtze River Delta Research Institute and Frank Company jointly developed a new type of Five-proof distribution manifold through nanotechnology , which combines brass, stainless steel , and resin plastic organically and perfectly , emerging at the right moment, which enhances the deepening and perfection of radiation industry.

Compare with a single metal material product , it is detected by a national detection institution , and has the advantage of Acid-base corrosion protection up to 99%, Anti-temperature conduction and diffusion, and improved insulation by 77%. It prevents external condensation water, and reduces the water out of 68%. It also improves 5 times for relieving the structure rate of an inner wall structure. It Anti-ultra-high to 200CC and ultra-low temperature to -50℃.

Five-proof distribution manifold takes the stainless steel as the main trunk, the tube body uses the brass valve core and the connector inside and outside double coating resin synthesis plastic . It has both the ruggedness of metal and the excellent function of plastic insulation without scaling . It is the most ideal and the most guaranteed patent products in heating and cooling radiation.

Five-proof distribution manifold is the Global pioneer product.

Advantages of Using Five-proof Nano Stainless Steel Manifold

Comparison of physical parameters of brass (Hpb59-1), stainless steel (SUS304) and synthetic plastics

Selected Values

Super Applicable Relatively durablea

10-year guarantee, 20-year service life.

Material
Media
Main Thread
Main Tube OD
Branch(adapter)
Capillary Tube Fittings
Spacing between
branches
Working Pressure
Effective Spool Stroke
Flowmete
Bracket

FS1202 Manifolds

FS1204 Manifolds

FS1209High-handle Ball Valve

FS1210Five-proofand Two-way Valve

three layers of gapless bonding vacuum insulation without condensation two-unit non-condensing compartment manifold

polyurethaneinfusion lamination
completeseparation of hot and cold layers
no condensation at all
the most effective triple isolation of supply
cooling and
radiant heating manifold

Application: Geothermal tube capillary radiation cooling; Ceiling and wall radiant cooling.

FS1301 Manifolds

Intelligent Analogue Systems

Intelligent Analogue Systems

FS1302 Manifolds

Intelligent Analogue Systems

Intelligent Analogue Systems

FS1304 Underfloor Heating Manifold Kit<br>Underfloor Heating Manifold Kit

Branch

2F\~15F

MEASUREMENT

suits: DN251-1/4"

Branch

2F\~15F

MEASUREMENT

suits: DN251-1/4"

FS1305

UnderfloorHeating Manifold Kit with Ball Valves

Underfloor Heating Manifold Kit with Ball Valves

Branch

2F\~15F

MEASUREMENT

suits: DN251-1/4"

FS1306

Branch

2F\~15F

MEASUREMENT

suits: DN251-1/4"

FS2001

capillary tube fittings (brass color / electroplated)

anti-counterfeiting

MEASUREMENT

1×Φ10

2×Φ10

3×Φ10

1×Φ12
2×Φ10

FS2002 one-piece locking nut

3×Φ12

FS2003 long/short one-piece locking nut

sectional drawing

FS2004 capillary tube square porous type

MEASUREMENT

FS2005 tube clamp

1×Φ10 2×Φ103×Φ10

MEASUREMENT

适用 Φ10 Φ12 Φ13

1×Φ102×Φ10 3×Φ10

MEASUREMENT

Φ10 Φ12 Φ13

FS2006 Balancing valves/flow meter images,View

DN15X3/4FX3/4F DN15X½/4MX34F

MEASUREMENT

DN20X1X1M DN20X1X1F

MEASUREMENT

MEASUREMENT

DN20X1½/4X11/4M DN20X1½/4X11/4F

FS5011 Electric Heating Actuators

Split

Electric Actuators

Working Pressure: 230vAC/24V
Power:2.5W/3W
Travel Time: 3-5mm
Force:110N
Connection Size: M30\*1.5mm
Housing Material: FlameRetardant PC
Length: 1m
IP Grade:IP45

Germany's Indutry 4.0

FS5004 Manual/Auto Electric

FS5005 Manual/Auto Electric

FS5006 Electric Heating Actuators

FS5007 Electric Heating Actuators

FS5009

FS5008

Electric Heating Actuators

Electric Heating Actuators

FS5010 Electric Heating Actuators

range: 3mm/6mm

FS5012

Intelligent Thermostat
Specifications:
Operating Voltage: 5V
Temperature Control Range: 5°C to 35°C (can be modified to 5°C to 80°C)
Temperature Sensor: NTC1%
Load Current: <10A<2W
Dimension:86×86×14mm
Housing Material: PC+ABS
Mounting Hole Distance: 60mm(standard)

Product Overview

The Smartlink digital thermostat is a device for temperature control. It can accurately collect, transmit and control the indoor temperature of floor heating and air conditioning. It uses micro-computerised, fully automatic intelligent logic, using pBUS (wired)and Npitc (wireless) communication technology, designed to match the Internet of Things and telecommunication networks, with programmable timing/temperature selection; the user can select the temperature at different times of the week according to their preferences.

FS5013

A underfloor heating intelligent LCD thermostat B Intelligent LCD thermostat for central air conditioning

Product Features

1. bright LCD colour display; beautiful andgorgeous;

2. Tempered glass panels, touch controls and beeping feedback for operation;
3. Infrared remote control function (optional) ;

4. Four air speed modes to choose from: high, medium, low and automatic;

5. Switch between cooling and heating operating modes;

6. Intelligent sleep function with automatic comfort temperature adjustment
7. High reliability with large transformer power supply and relay output control.

Specifications

Operating Voltage: 220AC ±10%50/60Hz
Temperature Control Range: 18-30°C
Temperature Sensor: NTC1%
Load Current:<3A<2W
Dimension:86×86×14mm
Housing Material: PC+ABS
Mounting Hole Distance: 60mm (standard)

Product Overview

The central air-conditioning thermostat with colour LCD display is suitable for indoor temperature control of central air-conditioning fan coil series or air duct series. By comparing the indoor temperature with the set temperature, the fan coil, electric valve and electric ball valve at the end of the air-conditioning system are controlled to open and close to achieve the purpose of regulating the indoor temperature, comfort and energy saving.

FS5014

A underfloor heating intelligent LCD thermostat B Intelligent LCD thermostat for central air conditioning

Product Features

1. bright LCD colour display; beautiful and gorgeous;

2. Tempered glass panels, touch controls and beeping feedback for operation; 3. One week programming mode with intelligent temperature control at 6 times of the day;

4. Power-down setting data memory function;

5. Anti-freeze function for living rooms;

6. Floor overheating protection;

7. Precise temperature control with single temperature single control, dual temperature double control mode selection;

8. High reliability with large transformer power supply and relay output control;
9. Parameter reset function.

Specifications

Operating Voltage: 220AC ±10%50/60Hz
Temperature Control Range: 5 to 35°C(can be modified to 5°C to 80°C)
Outer temperature limit: 5 to 60°C (factory setting: 45°C)
Temperature Sensor:NTC1%
Load Current: <10A<2W
Dimension:86×86×14mm
Housing Material: PC+ABS
Mounting Hole Distance: 60mm(standard)

FS5113

Touchscreen and Push-button Floor Heating Thermostat

FS5115
FS5114 Touchscreen Floor Heating WiFi Thermostat

Touchscreen and Push-button Floor Heating Thermostat

FS5116
FS5118 Manual Floor Heating Thermostat
Push-Button Floor Heating WiFi Thermostat

FS5119

Touchscreen and Push-button Floor Heating WiFi Thermostat
FS5012 Manual and Auto Electric Drive Actuator

FS5013 V Type Electric Drive Actuator
FS5014 Thermostatic Control Head

FS6014

Angle Front Ball Valve (PPR external filament main valve)

FS6015

Angle Front Ball Valve (PPR external filament main valve)

FS6017

Angle Front Ball Valve (snap-on external screw main valve) National/European Standard

FS6018

nlet Analogue Sub-control Valve

Specifications:

Nominal Pressure: 1.6Mpa
Media: cold/hot water
Working Temperature: -20°C≤T≤100°C
Test Pressure Standard: ISO5208
Pipe Thread Standard: ISO228
Note: foraluminium-plasticpipes, underfloor
heating pipes only

MEASUREMENT

1"XΦ25 1"XΦ32

Specifications:

Nominal Pressure: 1.6Mpa
Media: cold/hot water
Working Temperature:-20°C≤T≤100°C
Test PressureStandard: ISO5208
PipeThreadStandard: ISO228
Note: for aluminium-plastic pipes, underfloor
heating pipes only

MEASUREMENT

1"XΦ25X2.8 1"XΦ25X3.5

Specifications:

Nominal Pressure: 1.6Mpa
Media: cold/hot water
Working Temperature: -20°C≤T≤100°C
Test Pressure Standard: ISO5208
Pipe Thread Standard: ISO228
Note: for aluminium-plastic pipes, underfloor
heating pipes only

MEASUREMENT

1"XΦ20 1"XΦ25

Specifications:

Nominal Pressure: 1.6Mpa
Media: cold/hot water
WorkingTemperature: -20°C≤T≤100°C
Test Pressure Standard: ISO5208
Pipe Thread Standard: ISO228
Note: for aluminium-plasticpipes, underfloor
heating pipes only

MEASUREMENT

DN203/4"X3/4"DN25 1"X1"

FS6014

Angle Front Ball Valve (PPR external filament main valve)

FS6015

Angle Front Ball Valve (snap-on external screw main valve)

FS6016

Angle Front Ball Valve (Slip-Fit type) National/European Standard

FS6017

Quick Connect Ball Valves (Plating/Brass Colour)

FS6018

Quick Connect Large Diameter Ball Valves (Plating/Brass Colour)

Specifications:

Nominal Pressure: 1.6Mpa
Media: cold/hotwater
Working Temperature: - 2 0 ^ { \circ } \mathsf { C } <=slant \mathsf { T } <=slant 1 0 0 ^ { \circ } \mathsf { C }
Test Pressure Standard: ISO5208
Pipe ThreadStandard: ISO228
Note: for aluminium-plastic pipes, underfloor
heating pipes only

MEASUREMENT

1"XΦ25 1"XΦ32

Specifications:

Nominal Pressure: 1.6Mpa
Media: cold/hot water
Working Temperature: - 2 0 ^ { \circ } \mathsf { C } <=slant \mathsf { T } <=slant 1 0 0 ^ { \circ } \mathsf { C }
Test Pressure Standard: ISO5208
Pipe Thread Standard: ISO228
Note: for aluminium-plastic pipes, underfloor
heating pipes only

MEASUREMENT

1"XΦ20X2.0 1"XΦ25X2.8 1"XΦ25X3.5

Specifications:

Nominal Pressure: 1.6Mpa
Media: cold/hot water
Working Temperature: 2 0 ^ { \circ } \mathsf { C } <=slant \mathsf { T } <=slant 1 0 0 ^ { \circ } \mathsf { C }
Test Pressure Standard: ISO5208
Pipe ThreadStandard: ISO228
Note: for aluminium-plastic pipes, underfloor
heating pipes only

MEASUREMENT 1"XΦ20X2.0 1"XΦ25X2.8 1"XΦ25X3.5

Specifications:

Nominal Pressure: 1.6Mpa
Media: cold/hot water
Working Temperature: - 2 0 ^ { \circ } \mathsf { C } <=slant \mathsf { T } <=slant 1 0 0 ^ { \circ } \mathsf { C }
Test Pressure Standard: ISO5208
Pipe ThreadStandard: ISO228
Note: for aluminium-plastic pipes, underfloor
heating pipes only

MEASUREMENT

1"XΦ25 1"XΦ32

FS6019

Inlet Analogue Subcontrol Valve

FS6020

Specifications:

Nominal Pressure: 1.6Mpa Media: cold/hot water Working Temperature:-20°C≤T≤100°C Test Pressure Standard: ISO5208 Pipe Thread Standard: ISO228 Note: for aluminium-plastic pipes, underfloor heating pipes only

Inlet Analogue Subcontrol Valve

MEASUREMENT

DN25 1"X1"

Specifications:

Nominal Pressure: 1.6Mpa Media: cold/hot water Working Temperature: -20°C≤T≤100°C Test Pressure Standard: ISO 5208 Pipe Thread Standard: ISO228 Note: for aluminium-plastic pipes, underfloor heating pipes only

MEASUREMENT

3/4"XΦ25 1"XΦ25

FS6021 Fvalv

Specifications:

Nominal Pressure: 1. 6Mpa Media: cold/hot water Working Temperature: -20°C≤T≤100°C Test Pressure Standard: ISO5208 Pipe Thread Standard: ISO228 Note: for aluminium-plastic pipes, underfloor heating pipes only

MEASUREMENT

1"XΦ25X2.81"XΦ25X3.5

FS6022 Intelligent Sub-control Valve

FS6023

304 stainless steel cut-off multifunctional valve

Specifications:

Nominal Pressure: 1.6Mpa Media: cold/hot water WorkingTemperature:-20°C≤T≤100°C Test Pressure Standard: ISO5208 Pipe ThreadStandard: ISO228 Note: for aluminium-plastic pipes, underfloor heating pipes only

MEASUREMENT

1"XΦ25X2.81"XΦ25X3.5

Specifications:

NominalPressure: 1.6Mpa Media: cold/hot water WorkingTemperature:-20°C≤T≤100°C Test Pressure Standard: ISO5208 Pipe ThreadStandard: ISO228 Note: for aluminium-plastic pipes, underfloor heating pipes only

MEASUREMENT

1"XΦ25

1"X32"

FS6028304不锈钢多功能球阀

MEASUREMENT

DN32XΦ32 DN32XΦ40

FS6029304不锈钢多功能球阀

MEASUREMENT

DN25XΦ25 DN25XΦ32

Specifications:

Nominal Pressure: 1.6Mpa
Media: cold/hot water
Working Temperature: -20°C≤T≤100°C
Test Pressure Standard: ISO5208
Pipe Thread Standard: ISO228
Note:foraluminium-plastic pipes, underfloor
heating pipes only

Specifications:

Nominal Pressure: 1.6Mpa
Media: cold/hot water
Working Temperature: -20°C≤T≤100°C
Test PressureStandard: ISO5208
Pipe ThreadStandard: ISO228
Note: for aluminium-plastic pipes, underfloor
heating pipes only

FS6030 304不锈钢铝塑球阀

MEASUREMENT

Specifications:
Nominal Pressure: 1.6Mpa
Media: cold/hot water
Working Temperature: -20°C≤T≤100°C
Test Pressure Standard: ISO 5208
Pipe Thread Standard: ISO228
Note: for aluminium-plastic pipes, underfloor
heating pipes only

1"XΦ20X2.0 1"XΦ25X2.8 1"XΦ25X3.5

FS6031 304不锈钢PPR球阀

Specifications:
Nominal Pressure:1.6Mpa
Media: cold/hot water
Working Temperature: -20°C≤T≤100°C
Test Pressure Standard: ISO 5208
Pipe Thread Standard: ISO228
Note: for aluminium-plastic pipes, underfloor
heating pipes only

MEASUREMENT

1"XΦ25 1"XΦ32

Extraordinary and Infinite Positioning

Quick-position automatic exhaust valve

Product Features:

The venting valve must be upwards in order to exhaust air, and the threads of the products connected to the manifold have different starting teeth, which cannot be aligned after torquing, making the use of raw materials very time-consuming and troublesome for construction and installation, and difficult to align. \_

Our company has developed a quick positioning, which is used as follows:

Patented Products, No Counterfeiting.

1. No need to wrap raw material and glue, just hand-twist tightly;

2. A gentle press in and 360 degrees of free rotation alignment.

3. It will automatically pop up when aligned in position. If it does not pop out, simply bring it out gently. Never leaks, easy and quick to install, saves labour and time.

Fs8001Quick-position Automatic Exhaust Valve

Fs8001Quick-position Automatic Exhaust Valve

FS8003Drain Valvewith Compression Cap and Meter

FS8003 Drain Valve with Inner Wire and Meter
FS8003DrainValve with Compression Cap and Meter

SIZE

1"

SIZE

SIZE

1"

1"

SIZE

1"

SIZE

1"

Fine Automatic Exhaust Valve

Fs8005 Automatic Exhaust Valve

FS8004 Drain Valve

SIZE

1"

SIZE

1/2"

SIZE

3/8"1/2" 3/4"

SIZE

1"

Fs8007 Manual Plug Exhaust Valve (compression cap)
Fs8007 Manual Plug Exhaust Valve (compression cap)

Fs8009 Stainless Steel Automatic Hot Water Exhaust Valve

SIZE

1"1"-1/4"

SIZE

1"1"-1/4"

SIZE

1/2"

1/2"

SIZE

Schematic diagram of hot and cold circulating water tank

FS8035

FS8036

FS8037

FS8038

FS8039

MDN40+DN40

MDN40+FDN40

FDN40+DN40

SIZE

FDN40+DN40

MDN40+DN32

PPRΦ40+FDN32

MDN32+DN32

SIZE

FDN40+DN32

FDN32+DN32

MDN32+FDN40

SIZE

MDN40+FDN32

MDN32+FDN32

SIZE

PPRΦ40+FDN40

SIZE

PPRΦ32+FDN32

PPRΦ32+FDN40

FDN40+DN32

FDN32+DN32

FS8040

MDN40+DN40

SIZE

MDN40+DN32

MDN32+DN32

FS8041

FDN40+DN40

SIZE

FDN40+DN32

FDN32+DN32

FS8042

MDN40+FDN40

MDN32+FDN40

SIZE

MDN40+FDN32

MDN32+FDN32

FS8043

PPRΦ40+FDN32

SIZE

PPRΦ40+FDN40

PPRΦ32+FDN32

PPRΦ32+FDN40

FDN40+DN40

SIZE

FDN40+DN32

FDN32+DN32

FS8045

Water Tank Safety Components (safety valve + exhaust valve + pressure gauge) EPP black housing

Connection Size: G1"

Specifications:
Nominal Pressure: 1. 6Mpa
Media: cold/hot water
WorkingTemperature:-20°C≤T≤100°C
Test Pressure Standard: ISO 5208
Pipe Thread Standard: ISO228
Note: for aluminium-plastic pipes, underfloor
heatinpipesg only

FS8048

Water Tank Safety Components (safety valve + exhaust valve + pressure gauge) EPP black housing

MEASUREMENT

Connection Size:1"XΦ25X2.8 1"XΦ25X3.5

FS8046 Water Tank Safety Components (safety valve + exhaust valve + pressure gauge) EPP black housing
Copper visually Adjustable Differential Pressure Valve (Automatic FlowDistribution)

3bar,6bar

8bar, 9bar

MEASUREMENT

Connection Size:1/2"3/4"

MEASUREMENT

Connection Size:1\*XΦ25X2.8 1\*XΦ25X3.5

Water Tank Safety Components

BOILER COMPONENT

FS8052

Water Tank SafetyComponents (safety valve + exhaust valve + pressure gauge) EPP black housing

MEASUREMENT

Connection Size:3/4" 1" 11/4"

FS8047

MEASUREMENT

Connection Size:1"XΦ25X2.8 1"XΦ25X3.5

Expansion Tank Components for water supplypressure stabilisation (safety valve + exhaust valve + pressure gauge)

Expansion Tank Ccomponents
Water Tank Safety Components Connection Size: G1" Insulated Thermal Housing: black EPP Working Temperature: Max. 120°C Safety Valve Unloading Pressure : 3bar, 6bar, 8bar, 9bar

AutomaticWater Refill Valve

MEASUREMENT

Connection Size:1/2"3/4"

FS8405 Smartlink System

Pressure-independent dynamic balancing valve (flow control)

Function: Pressure-independent dynamically balanced electric control valve is a new type of control valve. Its role is to achieve automatic regulation and dynamic balance of flow in the piping system.

Function: Pressure-independent dynamicallybalancedelectrically operated control valves can be dynamically balanced. In piping systems, variations in flow rate can lead to uneven pressure distribution in the pipeline, thus affecting the stability and reliability of the piping system. However, the pressure-independent dynamic balance electric adjustment valve can automatically adjust the opening of the valve according to the change of flow rate, so as to realize the dynamic balance of the pipeline system. This dynamic balancing can greatly improve the stability and reliability of the piping system.

SIZE

1/2" 3/4" 1"

FS8045 Pre-meter CheckValve

MEASUREMENT

Connection Size:1/2"3/4"

FS8046 Drain Valve

MEASUREMENT

Connection Size:1/2"

FS8047 Automatic Water Refill Valve

MEASUREMENT

Connection Size:1/2"3/4"

FS8048 Pre-meter Check Valve

MEASUREMENT

Connection Size:1/2"3/4"

angle/straight

Manual Thermostatic Control Valve Angle PP-C/PERT/PB/PEX

FS7001 Self-controlled Thermostatic Valve AnglePP-C/PERT/PB/PEX

MEASUREMENT

1/2"XΦ12/16 1"XΦ16/20 1/2"XΦ15/203/4"XΦ12/16 3/4"XΦ16/20

FS7002

angle/straigh

FS7003 H Valve

MEASUREMENT

1/2"XΦ12/16 1"XΦ16/20 1/2"XΦ15/203/4"XΦ12/16 3/4"XΦ16/20

angle/straigh

MEASUREMENT

1/2"XΦ12/16 1"XΦ16/20 1/2"XΦ15/203/4"XΦ12/16 3/4"XΦ16/20

FS7004

Self-controlled Thermostatic Valve (Angle PP-R)

A type/triple sealing B type/doublesealing
FS7052 Self-operated TemperaturecontrolledValvet
Manual Thermostatic Control Valve (Angle PP-R)

FS7005

A type/ triple sealing B type/doublesealing
angle/straight
Manual Thermostatic Control Valve (Angle PP-R)

FS7006

A type/triple sealing B type/double sealing

angle/straight

MEASUREMENT

1/2"XΦ20 1/2"XΦ25

MEASUREMENT

1/2"XΦ20 1/2"XΦ25

3/4"XΦ25

MEASUREMENT

1/2"XΦ20 1/2"XΦ25

3/4"XΦ25

1"XΦ32

FS7007

Internal and External Wire Temperature Control Valve

KB-8004自控阀温控头

Manual Thermostatic Control Valve Angle PP-C/PERT/PB/PEX

C

FS7008

A type/ triple sealing B type/double sealing

1/2"X1/2 3/4"X3/4"1"X1"

MEASUREMENT

angle/straight
Self-controlled Temperature Control ValveAngle PP-C/PERT/PB/PEX

A type/ triple sealing B type/double sealing

FS7009

MEASUREMENT

1/2"XΦ12/16 1"XΦ16/20

1/2"XΦ15/203/4"XΦ12/16

3/4"XΦ16/20

MEASUREMENT

1/2"XΦ12/16 1"XΦ16/20 1/2"XΦ15/203/4"XΦ12/16 3/4"XΦ16/20

FS7010 TRV Kits and Valves

FS7011 TRV Kits and Valves

MEASUREMENT 1/2"X1/2

MEASUREMENT

3/4"X3/4"

FS7012 Lock arm i

FS7013 Lock arm i

SIZE

1/2" 3/4" 1" 1.1/4" 1.1/2" 2"

SIZE

1/2" 3/4" 1" 1.1/4" 1.1/2" 2"

FS7014 Thermostatic H Modules

FS7015 Thermostatic H Valves

FS7016 Thermostatic Valves

FS7017 SS304 Check Valve

MEASUREMENT

1/2"X1/2"
3/4"X3/4"

SIZE

1/2" 3/4" 1° 1.1/4" 1.1/2" 2"

FS7018 SS304 Filter Valve

FS7019
Two-end Pipe ConnectorΦ16/Φ20

SIZE

1/2" 3/4" 1" 1.1/4" 1.1/2" 2"

FS7020 SS304 Mini Ball Valve

SIZE

1/2" 3/4"

FS9006

1/2" 3/4" 1° 1.1/4" 1.1/2" 2"
1/2" 3/4" 1° 1.1/4" 1.1/2" 2"
FS9004sprlng chEck vaLvE

1/2" 3/4" 1" 1.1/4" 1.1/2" 2"
FS9005 FOOT VALVE

1/2" 3/4" 1" 1.1/4" 1.1/2" 2"
BRASS FITTING

sprlng chEck vaLvE
FS9008 FOOT VALVE
BRASS FITTING

FS9010 Ystrainer

FS9011 BRASS FITTING

FS6018 BALL VALVE

FS8205 High-handle Ball Valve
FS8206 Fs8206 Two-way Valve

FS8207 Fs8207 Two-way Valve

1/2" 3/4" 1"

Φ16 Φ20

SIZE

Extended Brass Angle Valve

1/2"3/4"

Brass Angle Valve

1/2" 3/4"
Extended Brass Angle Valve

1/2"3/4"
Brass Angle Valve

SIZE
1/2" 3/4"

Extended Brass Angle Valve

1/2" 3/4"
BRASS FITTING

Female Threaded Elbow Fitting

SIZE

Nipple

TheFunction of the Two-way Control Valve: Requlate the flow rate of hot and cold water to set the opening of the temperature control valve to control the flow rate of the water flow.

Working Principle:

The electric heating actuator is driven to open the valve and cold and hot water enters the fan coil to provide cold or warm air to the room. When the room temperature reaches the set value of the thermostat, the temperature arrogancecommands the closing of the actuator, thus cuttingoff the water flow into the fan coil. By closing and opening the valve, the room temperature is kept in the temperature range set by the temperature control.

Connection Port: 1. Thread 2. PE-Xa 3. PPR

FS8402 Electric Heating Systems

Excellent Performance, Excellent Valve. Frank: Smartlink Analogue Energy Saving Thermostatic Water Mixing System

1. Product Energy Saving
2. Systematic Energy Saving
3. Human-made Energy Saving

Analogue Actuator Water Mixing 220V to 5V

Mobile Phone APP

FS3003Pump Mixer Set

FS3004Pump Mixer Set

Description

Suitable for M² ; the water supply temperature is not higher than 95°C.
Suitable for left or right inlet; can be changed on site to a right-flush water supply •Programmable thermostat controls both room
temperature and underfloor heating water temperature. •Accurate monitoring of underfloor heating water
temperature.
•Temperature-limited water cut-off protection, adjustable from 35°C to 65°C
•Factory setting: If the measured temperature of the mixer pipe is below 35°C, the pump stops and starts running if it is above 45°℃.

FS3005Pump Mixer Set

FS3006Pump Mixer Set

FS3007Pump Mixer Set

Heating Circulation Pumping Station

Application:for heating systems, installed between heating boilers and heating equipment (floor heating, radiators, hot water storage tanks) to circulate the heating system medium (mixture of water and glycol)

Heating Circulation Pumping Station

Heating Circulation Pumping Station

Specifications

Wheelbase:125mm
Connection: G1-1/2(outside)×G1(inside)
Working Temperature: media temp. <=slant 1 1 0 ^ { \circ } { C } Rated Pressure: Max. 10bar
Insulated Shell: black EPP
Kvs value: Manual thermostat type:2.5m²/h, 3.2 m²/h Dynamic thermostat type/Straight-through high temperature type: 4.8 m2/h
Circulation Pumps: GrundfosUPM3 HYBRID 25- 70 180 ACA

FS8502 Air Conditioning Distributor

FS8503 Hydrobalance Distributor

FS8505 Hydrobalance Distributor

1. wireless temperature control

2. scale resistance settings

3. micro bubble exhaust

4. accessible link

5. effectively regulate the smooth

equalization of water flow

FS8504 Hydrobalance Distributor

water pump25-6

FS8506 Hydrobalance Distributor

water pump25-6

theFunctionofdifferential pressure bypass:

The differential pressure bypass valve is installed at the end of the manifold and applied to the protection of the floor heating pipe group. When the heating pipeline system runs variably, the system flow becomes smaller, resulting in an increase in differential pressure, and when the differential pressure exceeds the set value, the check valve automatically opens and the overpressure cycle drains water to protect the floor heating pipe pressure from exceeding the operation.)