PA50.60227IEC06[RV].CE PA50.60227 IEC06(RV).CE70℃300/50oV Single-core Electronic Wire

70℃300/500V单芯电子线

产品介绍PESOUCT

单芯聚氯乙烯绝缘电子线，符合IEC06标准，额定温度 : 7 0 ^ { \circ } \mathsf C , 电压300/500V。导体柔软，易于布线。既适合固定敷设，也适用于偶尔移动或轻微弯曲的应用环境。

Single-core PVC insulated wire compliant with IEC O6,rated at 7 0 ^ { \circ } \mathsf { C } and 300/500V.Flexible conductor makes routing easy.Suitable forfixed installation as well as occasional movement or slight bending applications.

·材质说明

导体：均由满足安规要求的裸铜单丝绞合而成绝缘：均由满足安规要求的热塑性聚氯乙烯(PVC）材料构成

·芯线颜色说明

黑色（BK，RAL9004）、棕色（BN，RAL9025）、红色（RD，RAL3020）、橙色(OG，RAL2008）、黄色（YE，RAL1018）、绿色（GN，RAL6016）、蓝色（BU，RAL5005）、浅蓝（LBU，RAL5015）、紫色（VT，RAL4007）、灰色（GY，RAL7036）白色（WT，RAL9003）、粉色（PK，RAL4003）、黄（绿）色（YEGN，RAL1018/RAL6016)

⑦ 应用环境ENVICANMNT

适用于机柜布线、设备内部配电与控制回路。
Used forcabinetwiring,internal powerdistribution,and control loops.

PA75.60227IEC 02 [RV].CE PA75.60227IEC 02 (RV).CE70°℃ 450/750V Single-core Electronic Wire

70℃450/750V单芯电子线

产品介绍ESCCT

符合IEC02标准的高压单芯聚氯乙烯绝缘线，额定温度 7 0 ^ { \circ } \mathsf C _ { \iota } ，电压450/750V。柔软结构便于施工布线。既适合固定敷设，也适用于偶尔移动或轻微弯曲的应用环境。

Single-core high-voltagePVC insulatedwire compliantwith IEC 02,rated 7 0 ^ { \circ } \mathsf { C } and 450/750V.Flexible for easy installation.Suitable for fixed installation as well as occasional movement or slight bending applications.

·材质说明

导体：均由满足安规要求的裸铜单丝绞合而成绝缘：均由满足安规要求的热塑性聚氯乙烯（PVC）材料构成

·芯线颜色说明

黑色（BK，RAL9004）、棕色（BN，RAL9025）、红色（RD，RAL3020）、橙色(OG，RAL2008）、黄色（YE，RAL1018）、绿色（GN，RAL6016）、蓝色（BU，RAL5005）、浅蓝（LBU，RAL5015）、紫色（VT，RAL4007）、灰色（GY，RAL7036）白色（WT，RAL9003）、粉色（PK，RAL4003）、黄（绿）色（YEGN，RAL1018/RAL6016)

应用环境EVUCANTMINT

用于工业电源主干线、建筑电气系统等。

Used in industrial powerlines and building electrical systems.

PA75.BVR.CEI PA75.BVR.CE70℃ 450/750V Single-core Electronic Wire

70℃450/750V单芯电子线

产品介绍DESCUCT

BVR结构的单芯软导体电子线，额定温度 7 0 ^ { \circ } { C } ，电压 4 5 0 / 7 5 0 \vee . ，具备良好柔韧性，适合复杂布线路径。既适合固定敷设，也适用于偶尔移动或轻微弯曲的应用环境。

BVR typesingle-core flexible conductorwire rated at 7 0 ^ { \circ } \mathsf { C } and450/750V.Highly flexible for routing in complex layouts.Suitable for fixed installation as well as occasional movement or slight bending applications.

·材质说明

导体：均由满足安规要求的裸铜单丝绞合而成绝缘：均由满足安规要求的热塑性聚氯乙烯（PVC）材料构成

·芯线颜色说明

黑色（BK，RAL9004）、棕色（BN，RAL9025）、红色（RD，RAL3020）、橙色(OG，RAL2008）、黄色（YE，RAL1018）、绿色（GN，RAL6016）、蓝色（BU，RAL5005）、浅蓝（LBU，RAL5015）、紫色（VT，RAL4007）、灰色（GY，RAL7036）白色（WT，RAL9003）、粉色（PK，RAL4003）、黄（绿）色（YEGN，RAL1018/RAL6016)

应用环境 APPLICATION ENVIRONMENT

广泛应用于低压电气装置、配电箱及接线系统。

Widely used in low-voltage electrical devices,distribution boxes,and wiring systems.

PA60.ULAWM1015 PA6VULSWM101510oncWire

105℃600VUL单芯电子线

产品介绍ESDCT

符合ULAWM1015标准的单芯高压电子线，额定温度 1 0 5 ^ { \circ } { C } ，电压 6 0 0 \mathsf { V } _ { \circ } 绝缘厚度高，耐热性强。既适合固定敷设，也适用于偶尔移动或轻微弯曲的应用环境。

Single-core high-voltage electronicwire compliant with ULAWM1015,rated at \eta 0 5 ^ { \circ } { C } and 600V.Thick insulation ensures heat resistance.Suitable for fixed installation as well as occasional movement or slight bending applications.

·材质说明

导体：均由满足安规要求的裸铜单丝绞合而成绝缘：均由满足安规要求的热塑性聚氯乙烯（PVC）材料构成

·芯线颜色说明

黑色（BK，RAL9004）、棕色（BN，RAL9025）、红色（RD，RAL3020）、橙色(OG，RAL2008）、黄色（YE，RAL1018）、绿色（GN，RAL6016）、蓝色（BU,RAL5005）、浅蓝（LBU，RAL5015）、紫色（VT，RAL4007）、灰色（GY，RAL7036）白色（WT，RAL9003）、粉色（PK，RAL4003）、黄（绿）色（YEGN，RAL1018/RAL6016)

应用环境EVUICANTMENT

适用于工业控制柜、电气设备和主电源布线。

Used in control cabinets, electrical equipment,and power distribution systems.

INDUSTRIALSECURITY& SAFETYCABLES

工业安防线缆 ②

产品介绍 PRODUCT OVERVIEW

本系列线缆专为工业环境中对电气系统阻燃性与运行安全性要求较高的场合而设计，主要用于固定安装的控制、电源与信号线路。采用经特殊配方改性的聚氯乙烯材料（UL认证备案材料），具备优异的阻燃性能与抑烟能力，符合ULPlenum（UL910）与Riser（UL1666）阻燃等级要求。在火灾或高温等极端情况下，仍能有效控制火焰蔓延并减少烟雾释放，是保障工业系统稳定运行的重要线缆选择。

Thiscableseriesisspeciallydesignedforindustrial environmentsrequiring high flame retardancyandoperationalsafetyforelectrical systems.Mainlyusedforfixedinstallationsof control,powerndsignallines,iteaturesspeciallyformulatedmodifiedPVCmaterials(UL certified)thatofferexcellentflameretardantandsmokesuppressionperformance.Meeting UL Plenum(UL910)and Riser(UL1666)flameretardantstandards,thesecableseffectively limit flamespreadandreducesmokeemissionunderfireorhigh-temperatureconditions,making themacrucialchoice forensuring the stable operationof industrial systems.

PPRH4

产品特点 EATURES

■采用改性高阻燃PVC材料，具备出色的抑烟性与火焰蔓延控制能力
提供多芯、单芯、屏蔽/非屏蔽等多种结构配置，满足不同系统需求
支持长期固定敷设，适应各种工业环境的温湿波动与布线路径
■符合ULPlenum/Riser标准，保障使用安全与全球通用性
Madewithspeciallymodifiedhighflame-retardantPVCmaterial，offering excellentsmokesuppressionandflamespreadcontrol
Availableinmulti-core,single-core,shielded/non-shieldedconfigurations
tomeetdiversesystemrequirements
Suitableforlong-termfixedinstallation,adaptabletovariousindustrial environmentaltemperatureandhumidityfluctuationsaswellasroutingpaths
·Complieswith ULPlenumand Riserstandards,ensuring safetyand
globalapplicability

典型应用场景APUICATIN

工业自动化系统中的控制与电源传输回路
安防监控、报警系统、门禁与传感设备信号布线
控制柜、分线盒、通信接口等固定弱电系统连接
■能源、环保、医药、电子等行业需高阻燃保障的生产车间
■所有对固定安装、阻燃性、烟雾控制有明确要求的工业弱电系统
·Controland power transmissioncircuitsin industrialautomationsystems
Signalwiring forsecuritymonitoring,alarmsystems,accesscontrol,and
·sensordevices
·Fixed low-voltagesystemconnectionsincontrolcabinets,junctionboxes,and communicationinterfaces
·Productionworkshopsinenergy,environmental protection,pharmaceutical,and electronicsindustriesrequiring high flameretardancy
·All industrial low-voltagesystemswithstrictrequirementsforfixed installation, flame retardancy,and smokecontrol

CABLECROSSSECTION

PRODUCTSTRUCTURE

Conductor:Solid bare copper
Insulation Material:Polyvinyl Chloride (PVC)
Insulation OD.:Listed below table
Insulation Colors:Refer to the remarks in detail
Assembly:Allof the wires stranded together
Shield Type:Alum+Poly
Drain wire:24AWG Tinned stranded copper
JacketMaterial:
Polyvinyl Chloride (PVC)
Rip cord for ease of jacket removal
Jacket OD.:Listed below table
Colorof Jacket:Refer to the remarks in detail

Example of UL printing: CMR type: 22AWG 4 COND SHIELDED SOLID EXXXXXX c(UL)us CMR 75C \*\*\*\*FT CL3R type: 22AWG 4COND SHIELDED SOLID EXXXXXX ULCL3R FT4 75°C \*\*\*\*FT FPLRtype:22AWG4COND SHIELDED SOLID EXXXXXXULFPLR75°C \*\*\*\*FT

STANDARDSPECIFICATION

·UL1424 FPLR,NEC article 760
·UL13CL3R,NEC article725
“FT4”isauthorized for all Types
·UL444 and CSA C22.2 No.214 CMR,NEC article 800
·Flame Test UL1666
·RoHS Compliant

Example of ETL printing: CMR type:22AWG4 COND SHIELDED SOLID EXXXXXXc(ETL)us CMR75°C \*\*\*FT CL3R type:22AWG 4 COND SHIELDED SOLID EXXXXXX ETLCL3R FT4 75C \*\*\*\*FT FPLR type:22AWG 4 COND SHIELDED SOLID EXXXXXX ETLFPLR 75°C \*\*\*\*FT

ELECTRICALPROPERTIES @ 2 0 ^ { \circ } C

Test voltage:2.0KVAC/min. Conductor resistance:Listed below table

CABLECROSSSECTION

STANDARDSPECIFICATION

·UL1424FPLR,NECarticle760
·UL13 CL3R,NEC article 725 “FT4”isauthorized for all Types
·UL 444 and CSA C22.2 No.214 CMR,NEC article 800
·Flame Test UL1666
·RoHS Compliant

PRODUCTSTRUCTURE

Conductor:Solid bare copper
Insulation Material:Polyvinyl Chloride (PVC)
Insulation OD.:Listed below table
Insulation Colors:Refer to the remarks in detail
Assembly:Allof the wires stranded together
Jacket Material:
·Polyvinyl Chloride (PVC)
·Rip cord for ease of jacket removal
Jacket OD.:Listed below table
Colorof Jacket:Refer to the remarks indetail

Example of UL printing: CMR type:22AWG 4 COND UNSHIELDED SOLID EXXXXXX c(UL)us CMR 75°C \*\*\*FT CL3R type:22AWG4 COND UNSHIELDED SOLID EXXXXXX ULCL3R FT4 75°C \*\*FT FPLR type:22AWG4COND UNSHIELDED SOLID EXXXXXX ULFPLR75C \*\*\*\*FT

Example of ETL printing: CMR type:22AWG 4COND UNSHIELDED SOLID EXXXXXX c(ETL)us CMR 75°C \*\*\*FT CL3R type: 22AWG 4 COND UNSHIELDED SOLID EXXXXXX ETLCL3R FT4 75°C \*\*\*\*FT FPLR tyPe: 22AWG 4 COND UNSHIELDED SOLID EXXXXXX ETLFPLR 75C \*\*\*\*FT

ELECTRICALPROPERTIES@20℃

Testvoltage:2.0KVAC/min. Conductor resistance:Listed below table

CABLECROSSSECTION

PRODUCTSTRUCTURE

Conductor: Stranded bare copper
Insulation Material:Polyvinyl Chloride (PVC)
Insulation OD.:Listed below table
Insulation Colors:Refer to the remarks in detail
Assembly:All of the wires stranded together
Shield Type:Alum+Poly
Drain wire:24AWG Tinned stranded copper
Jacket Material:
·Polyvinyl Chloride (PVC)
·Rip cord for ease of jacket removal
Jacket OD.:Listed below table
Colorof Jacket:Refer to the remarks in detail

Example of ULprinting: CMR type:22AWG 4 COND SHIELDED STRANDED EXXXXXXc(UL)us CMR75C \*\*\*\*FT CL3R type: 22AWG 4 COND SHIELDED STRANDED EXXXXXX ULCL3RFT475°C \*\*\*\*FT FPLR type:22AWG4 COND SHIELDED STRANDED EXXXXXX ULFPLR75°C \*\*\*\*FT

STANDARDSPECIFICATION

·UL1424 FPLR,NEC article 760
·UL13 CL3R,NEC article 725
“FT4”isauthorized for all Types
·UL444 and CSA C22.2 No.214 CMR,NEC article 800
·Flame Test UL1666
·RoHS Compliant

Example of ETL printing: CMR type: 22AWG 4 COND SHIELDED STRANDED EXXXXXX c(ETL)us CMR75°C \*\*\*\*FT CL3R tyPe: 22AWG 4 COND SHIELDED STRANDED EXXXXXX ETLCL3R FT475°C \*\*\*FT FPLR type:22AWG 4 COND SHIELDED STRANDED EXXXXXX ETLFPLR75°C \*\*\*\*FT

ELECTRICALPROPERTIES @20℃

Testvoltage:2.0KVAC/min. Conductor resistance:Listed below table

CABLECROSSSECTION

STANDARDSPECIFICATION

·UL1424 FPLR,NEC article 760
·UL13 CL3R,NEC article 725
“FT4”isauthorized forall Types
·UL 444 and CSA C22.2 No.214 CMR,NEC article 800
·Flame Test UL1666
·RoHS Compliant

PRODUCTSTRUCTURE

Conductor:Stranded bare copper
Insulation Material:Polyvinyl Chloride (PVC)
Insulation OD.:Listed below table
Insulation Colors:Refer to the remarks in detail
Assembly:Allof the wires stranded together
Jacket Material:
·Polyvinyl Chloride (PVC)
·Rip cord for ease of jacket removal
Jacket OD.:Listedbelow table
Colorof Jacket:Refer to the remarks in detail

Example of UL printing: CMR type: 22AWG 4 COND UNSHIELDED STRANDED EXXXXXX c(UL)us CMR 75°C \*\*\*\*FT CL3R type:22AWG 4COND UNSHIELDED STRANDED EXXXXXX ULCL3RFT475°C \*\*\*FT FPLR type: 22AWG 4COND UNSHIELDED STRANDED EXXXXXX ULFPLR 75°C \*\*FT

Example of ETL printing: CMR type: 22AWG 4 COND UNSHIELDED STRANDED EXXXXXX c(ETL)us CMR 75°C \*\*\*\*FT CL3R type: 22AWG 4 COND UNSHIELDED STRANDED EXXXXXX ETLCL3R FT4 75°C \*\*\*FT FPLR type: 22AWG 4 COND UNSHIELDED STRANDED EXXXXXX ETLFPLR 75°C \*\*\*\*FT

ELECTRICALPROPERTIES @ 2 0 ^ { \circ } \mathsf { C }

Testvoltage:2.0KVAC/min. Conductor resistance:Listed below table

CABLECROSSSECTION

STANDARDSPECIFICATION

·UL1424FPLP,NEC article 760 ·UL13 CL3P,NEC article 725 ·UL444and CSA C22.2 No.214 CMP, NEC article 800 ·Flame Test NFPA 262(UL910) ·RoHSCompliant

PRODUCTSTRUCTURE

Conductor: Solid bare copper
Insulation Material:Polyvinyl Chloride (PVC)
Insulation OD.:Listed belowtable
Insulation Colors:Refer to the remarks in detail
Assembly:Allof the wires stranded together
Shield Type:Alum+Poly
Drain wire:24AWG Tinned stranded copper
Jacket Material:
·Polyvinyl Chloride (PVC)
·Rip cord for ease of jacket removal
Jacket OD.:Listed below table
Colorof Jacket:Referto the remarks in detail

Test voltage:2.0KVAC/min. Conductor resistance:Listed below table

Example of UL printing: CMP type: 22AWG 4COND SHIELDED SOLID EXXXXXXc(UL)us CMP 75°C \*\*\*\*FT CL3P type:22AWG 4 COND SHIELDED SOLID EXXXXXX ULCL3P 75C \*\*\*\*FT FPLP type:22AWG4COND SHIELDED SOLID EXXXXXX ULFPLP 75C \*\*\*\*FT

Example of ETL printing: CMP type:22AWG 4 COND SHIELDED SOLID EXXXXXXc(ETL)us CMP75C \*\*\*\*FT CL3P type:22AWG 4 COND SHIELDED SOLID EXXXXXX ETLCL3P75C \*\*\*\*FT FPLP type:22AWG 4 COND SHIELDED SOLID EXXXXXX ETLFPLP 75°C \*\*\*\*FT

ELECTRICALPROPERTIES@ 2 0 ^ { \circ } \mathsf { C }

CABLECROSSSECTION

STANDARDSPECIFICATION

·UL1424FPLP,NECarticle760 ·UL13 CL3P,NEC article 725 ·UL444 and CSA C22.2 No.214 CMP,NEC article800 ·Flame Test NFPA 262(UL910) ·RoHS Compliant

PRODUCTSTRUCTURE

Conductor:Solid bare copper
Insulation Material:Polyvinyl Chloride (PVC)
Insulation OD.:Listed below table
Insulation Colors:Refer to the remarks in detail
Assembly:Allof the wires stranded together
Jacket Material:
·Polyvinyl Chloride (PVC)
·Rip cord for ease of jacket removal
Jacket OD.:Listed belowtable
Colorof Jacket:Refer to the remarks indetail

Example of UL printing: CMP type:22AWG 4 COND UNSHIELDED SOLID EXXXXXXc(UL)us CMP 75C \*\*\*\*FT CL3P type:22AWG4 COND UNSHIELDED SOLID EXXXXXXULCL3P75°C \*\*\*\*FT FPLP tyPe:22AWG 4 COND UNSHIELDED SOLID EXXXXXX ULFPLP 75C \*\*\*\*FT

Example of ETL printing: CMP type:22AWG 4COND UNSHIELDED SOLID EXXXXXX c(ETL)us CMP 75°C \*\*\*\*FT CL3P type:22AWG 4 COND UNSHIELDED SOLID EXXXXXX ETLCL3P 75°C \*\*\*\*FT FPLP type: 22AWG 4 COND UNSHIELDED SOLID EXXXXXX ETLFPLP 75°C \*\*\*\*FT

ELECTRICAL PROPERTIES @ 2 0 ^ { \circ } \mathsf { C }

Test voltage:2.0KVAC/ min. Conductor resistance:Listed below table

CABLECROSSSECTION

STANDARDSPECIFICATION

·UL1424FPLP,NEC article 760 ·UL13 CL3P,NEC article725 ·UL444and CSA C22.2 No.214 CMP, NEC article 800 ·Flame Test NFPA 262(UL910) ·RoHS Compliant

PRODUCTSTRUCTURE

Conductor: Stranded bare copper
Insulation Material:Polyvinyl Chloride (PVC)
Insulation OD.:Listed below table
Insulation Colors:Refer to the remarks in detail
Assembly:All of the wires stranded together
Shield Type:Alum+Poly
Drain wire:24AWG Tinned stranded copper
Jacket Material:
·Polyvinyl Chloride (PVC)
·Rip cord for ease of jacket removal
Jacket OD.:Listed below table
Colorof Jacket:Referto the remarksindetail

Test voltage:2.0KVAC/min. Conductor resistance:Listed below table

Example of UL printing: CMP type: 22AWG 4 COND SHIELDED STRANDED EXXXXXXc(UL)us CMP75°C \*\*\*\*FT CL3P type: 22AWG4 COND SHIELDED STRANDED EXXXXXX ULCL3P 75°C \*\*\*\*FT FPLP type: 22AWG 4 COND SHIELDED STRANDED EXXXXXX ULFPLP 75°C \*\*\*\*FT

Example of ETL printing: CMP type:22AWG4 COND SHIELDED STRANDED EXXXXXX c(ETL)us CMP75°C \*\*\*\*FT CL3P type:22AWG 4COND SHIELDED STRANDED EXXXXXX ETLCL3P75C \*\*\*\*FT FPLP type: 22AWG 4 COND SHIELDED STRANDED EXXXXXX ETLFPLP 75°C \*\*\*\*FT

ELECTRICALPROPERTIES @ 2 0 ^ { \circ } \mathsf { C }

CABLECROSSSECTION

STANDARDSPECIFICATION

·UL1424FPLP,NEC article 760 ·UL13 CL3P,NEC article 725 ·UL444and CSA C22.2 No.214 CMP, NEC article 800 ·Flame Test NFPA 262(UL910) ·RoHSCompliant

PRODUCTSTRUCTURE

Conductor: Stranded bare copper
Insulation Material:Polyvinyl Chloride (PVC)
Insulation OD.:Listed below table
Insulation Colors:Refer to the remarks in detail
Assembly:All of the wires stranded together
Jacket Material:
·Polyvinyl Chloride (PVC)
·Rip cord for ease of jacket removal
Jacket OD.:Listed below table
Colorof Jacket:Refer to the remarks indetail

Example of UL printing: CMP type:22AWG 4COND UNSHIELDED STRANDED EXXXXXX c(UL)us CMP 75°C \*\*\*\*FT CL3P type:22AWG 4COND UNSHIELDED STRANDED EXXXXXX ULCL3P 75°C \*\*\*\*FT FPLP type: 22AWG 4 COND UNSHIELDED STRANDED EXXXXXX ULFPLP 75C \*\*\*\*FT

Example of ETL printing: CMP type:22AWG 4COND UNSHIELDED STRANDED EXXXXXX c(ETL)us CMP75°C \*\*\*FT CL3P type:22AWG4 COND UNSHIELDED STRANDED EXXXXXX ETLCL3P 75°C \*\*FT FPLP type: 22AWG 4 COND UNSHIELDED STRANDED EXXXXXX ETLFPLP75°C \*\*\*\*FT

ELECTRICALPROPERTIES @20C

Test voltage:2.0KVAC/min. Conductor resistance:Listed below table

本表所列载流量为推荐值，分别依据IEC60204-1（设备内部配线）与IEC60364-5-52（建筑及设备外部布线）中典型应用条件进行估算，其中：

1.设备内部配线假设电缆安装于设备或控制柜内，自由空气中非成缆独立布置，环境温度为 3 0 ^ { \circ } \mathsf { C } ，最多三芯导体带载，可视作单芯布线。

2.外部布线则假设电缆以穿管成束捆扎布线安装于桥架、墙面或穿管中，环境温度为 3 0 ^ { \circ } \mathsf C , 具备基本通风条件。

3.两类应用均以常规工业绝缘材质 1 0 5 ^ { \circ } { C } PVC为基础，参考IEC数据简化经验值推算，如绝缘材质更换为1 2 5 ^ { \circ } C XLPE，预计载流量可 以在下表基础上提升约 1 5 % 中

注：由于实际安装环境可能存在敷设密度、冷却条件、绝缘等级、周围热源等差异，表中数值仅供参考，建议根据具体布线方式及热环境按标准修正系数进行调整，或通过实际测量方式验证，以确保导体长期安全可靠运行。

注：以上载流量数据基于IEC 60204-1与IEC 60364-5-52的典型应用条件进行推算，具备标准逻辑参考性，但在实际工程应用中往往具有一定偏差。

例如在一项实验室环境实测案例中，ULAWM1015 1 / 0 AWG（导体截面积 5 3 . 4 9 ~ \mathsf {mm } ^ { 2 } ）在持续通电电流205A条件下，30分钟内温度稳定，无明显上升，导体最高温度为 6 0 . 2 ^ { \circ } \mathsf { C } , 绝缘层最高温度为 5 1 . 7 ^ { \circ } { C } , 当时环境温度为 2 3 . 0 ^ { \circ } \mathsf C , 相对湿度为 3 8 . 5 %