该页无缩略图
Model NumberStructure
Features
Insidesurgeprotection,reversepolarityprotection Longuse-lifecycleandhighreliability,easyinstall,enconomicprice RedLEDstatusindication,easytoconfirmworksituation Protection structureIP65(IECstandard)
| Item | Code | Description |
| ①Company code | C | Companycode |
| ②Product name | R | Capacitveproximitysensor |
| ③Shape of shell | Y | Cylinder-shaped |
| ④Dimension code | 18 | 18=M18 |
| Product type | Without | High-end type |
| Detectiondistance | 05 | 05=5mm |
| Output mode | K | AC 2wires |
| L | DC2wires | |
| P | PNP3wires | |
| N | NPN3wires | |
| ⑧Output state www.jrcis 0577-62733 技人品牌设计 | A | NO |
| com B | NC | |
| Connection | C | NO+NC |
| Without | Without:Leadwire | |
| T | Plug-in | |
| R | Wiring leadsPlug-in |
Specifications
DC3wire type
| owietype | |||||||
| 牌设计 Model | Com CRY12-02NA CRY12-02NB CRY12-02PA CRY12-02PB | CRY12-04NA CRY12-04NB CRY12-04PA CRY12-04PB | CRY18-05NA CRY18-05NB CRY18-05NC CRY18-05PA CRY18-05PB CRY18-05PC | CRY18-08NA CRY18-08NB CRY18-08NC CRY18-08PA CRY18-08PB CRY18-08PC | CRY30-10NA CRY30-10NB CRY30-10NC CRY30-10PA CRY30-10PB CRY30-10PC | CRY30-15NA CRY30-15NB CRY30-15NC CRY30-15PA CRY30-15PB CRY30-15PC | |
| Sensing distance | 2mm | 4mm | 5mm | 8mm | 10mm | 15mm | |
| Hysteresis | Max.10%of sensing distance 0~3.5mm | 0~5.6mm | 0~7mm | 0~10.5mm | |||
| Settingdistance | 0~1.4mm 0~2.8mm | ||||||
| Power supply (Operating voltage) | 12-24VDC(10-30VDC) | ||||||
| Leakagecurrent | Max.10mA | ||||||
| Response frequency(1) | 50Hz | ||||||
| Residual voltage | Max.1.0V | ||||||
| Affection by Temp. | Max.±10%forsensingdistanceatambient temperature20℃ | ||||||
| Controloutput | Max.200mA | ||||||
| Insulationresistance | Min.50MQ（at500VDCmegger) 1500VAC50/60Hzfor1minute | ||||||
| Dielectricstrength Vibration | |||||||
| Shock | 500m/s²（approx.50G)X,Y,Zdirectionsfor3times | ||||||
| Indicator | Operationindicator(redLED) | ||||||
| Ambienttemperature | -25~+60C(No icing) | ||||||
| Storagetemperature | -30~+80C (No icing) | ||||||
| Ambienthumidity | 35~95%RH(Nocondensation) | ||||||
| Protectioncircuit | Surgeprotectioncircuit,Overcurrentprotectioncircuit | ||||||
| Material | Ca | ||||||
| Cable | 3.8,3P,2m | Φ4.8,3P,4P2m | |||||
| 2 | (AWG22,Corediameter:0.1mm,Numberofcores:30,Insulatordiameter:1.25 | ||||||
| Protection | IP65 | ||||||
Specifications
AC2wiretype
| Model | CRY18-05KB | CRY18-08KBA | CRY30-10KA | CRY30-15KB |
| Sensing distance | 5mm | 8mm | 10mm | 15mm |
| Hysteresis | Max.10%of sensing distance com | |||
| Seting distancehx | 0~3.5mm 21 | 0~5.6mm | 0~7mm | 0~10.5mm |
| (operasugotage) | 90-250VAC | |||
| Leakagecurrent | Max.10mA | |||
CRYcapacitive Proximity Sensor
Specifications
AC2wiretype
| Mod设计 | CRY18-05KA | CRY18-08KA | CRY30-10KA | CRY30-15KA |
| Response frequency（*1) | 50Hz | |||
| Residual voltage | Max.10V | |||
| Affection by Temp. | Max.±10%forsensing distanceatambient temperature20℃ | |||
| Controloutput | Max.200mA | |||
| Insulationresistance | Min.50MQ（at500VDCmegger) | |||
| Dielectricstrength | 1500VAC50/60Hzfor1minute | |||
| Vibration | 1mmamplitudeatfrequencyof10to55Hz（for1min.）ineachofX,Zdirectionsfor2hours | |||
| Shock | 500m/s²（approx.50G)X,Y,Zdirectionsfor3times | |||
| Indicator | Operationindicator(redLED) | |||
| Ambienttemperature | -25~+60℃(No icing) | |||
| Storagetemperature | -30~+80℃ (No icing) | |||
| Ambienthumidity | 35~95%RH(No condensation) | |||
| Protectioncircuit | Surgeprotection circuit, | |||
| Material | Case/Nutnsfctandrdaraylyinri)ireistaalai resistantPolyvinyichloride(PvC) | |||
| Cable | Φ4.8,2P,2m | |||
| (AWG22,Corediameter:0.1mmNumberofcores:30,Insulatordiameter1.25577-62733721 | ||||
| Protection | IP65 | |||
Appearance and Dimension
技人品牌设计16r3.c0m
Model NumberStructure
Features
Insidesurgeprotection,reversepolarityprotection Longuse-lifecycleandhighreliability,easyinstall,enconomicprice RedEDstatusindicationeasytoconfirmworksituation Protection structureIP65(IECstandard)
| Item | Code | Description |
| ①Company code | C | Companycode |
| ②Product name | M | Analogproximitysensor |
| ③Shape of shell | Y | Cylinder-shaped |
| ④ Dimension code | 30 | 30=M30 |
| Product type | Without | High-end type |
| E | Standardtype | |
| ? Detection distance | 15 | 15=15mm |
| U | Voltagemode | |
| Output mode | 1 | Currentmode |
| A | NO | |
| ⑧Output state 技人品牌设计 | B | NC |
| C | NO+NC | |
| Connection | Without | Without:Leadwire |
| T | Plug-in | |
| R | Wiring leadsPlug-in |
Specifications
| Model | CMY18-08U CMY18-081 | CMY30-15U CMY30-151 | CMF40-20U CMF40-201 | CMF48-20U CMF48-201 | |
| Sensing distance | -627 1-8mm | 1-15mm | 1-20mm | 1-20mm | |
| Hysteresis | 3-20% | ||||
| Powersupply (Operating voltage) | 15-30VDC | ||||
| Affection byTemp. | Max.±10%forsensingdistanceatambienttemperature20℃ | ||||
| Control output | Outputvoltage/Currentoutput | ||||
| Insulationresistance | Min.50MQ（at500VDCmegger) | ||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | ||||
| Vibration | 1mmamplitudeatfrequencyof10to55Hz（for1min.）ineachofX,Y，Zdirectionsfor2hours | ||||
| Shock | 500m/s²（approx.50G)x,Y，Zdirectionsfor3times | ||||
| Indicator | Operationindicator(redLED) | ||||
| Ambienttemperature | -15~+55C(No icing) | ||||
| Storagetemperature | -15~+55C(No icing) 0577-62733721 | ||||
| Ambient humidity | 35~95%RH(Nocondensation) | ||||
| Protection circuit | Surgeprotectioncircuit，Overcurrentprotectioncircuit | ||||
| Material | Ca/stitai cable(Black):OilresistantPolyvinylchloride(PVC) | ||||
| Cable | 3.8,2P,2m | Φ4.8,2P,2m | |||
| (AWG22,Corediameter:0.1mm,Numberofcores:25, Insulatordiameter:1.25 | （AWG22,Corediameter:0.1mm,Numberofcores:30 Insulatordiameter:1.25 | ||||
| Protection | IP65 | ||||
Appearance and Dimension
Model NumberStructure
Features
Insidesurgeprotection,reversepolarityprotection Longuse-lifecycleandhighreliability,easyinstall,enconomicprice RedEDstatusindicationeasytoconfirmworksituation Protection structure IP67(IECstandard)
| Item | Code | Description |
| ①Company code | C | Company code |
| ② Product name | H | Hall sensor |
| ③ Shape of shell | Y | Cylinder-shaped |
| ④ Dimension code | 08 | 08=M08 |
| Product type | Without | High-end type |
| ? Detectiondistance | 10 | 10=10mm |
| Output mode | P | PNP3wires |
| N | NPN3wires | |
| A | NO | |
| ⑧Output state 技人品牌设计 www.jrcis.com 0577-627337 | B | NC |
| C | NO+NC | |
| Without | Without:Leadwire | |
| T | Plug-in | |
| Connection | R | Wiring leadsPlug-in |
Specifications
| Model 设计 | CHY88-10NA CHY88-10PA | CHY12-10NA CHY12-10PA CHY12-10NB CHY12-10PB | CHY18-10NA CHY18-10PA CHY18-10NB CHY18-10PB | |||
| Sensingdistance | 10mm | 10mm | 10mm | |||
| Hysteresis | 3-20% | |||||
| Consumption current | Max.10mA | |||||
| Power supply (Operatingvoltage) | 6-36VDC | |||||
| Response frequency | 1000Hz | |||||
| Residual voltage | Max.1V | |||||
| Affection by Temp. | Max.±10%forsensingdistanceatambienttemperature20℃ | |||||
| Control output | Max.200mA | |||||
| Insulationresistance | Min.50MQ(at 500VDCmegger) 1500VAC50/60Hzfor1minute | |||||
| Dielectricstrength | ||||||
| Vibration Shock | 1mmamplitudeatfrequencyof10to55Hz（for1min.）ineachofX,Zdirectionsfor2hours 500m/s²（approx.50G)x,Y,Zdirectionsfor3times | |||||
| Indicator | Operationindicator（red LED) | |||||
| Ambienttemperature | -15~+55C(No icing) www.jrcis.com 中电设计 | |||||
| Storagetemperature | -15~+55C（Noicing) 3372 | |||||
| Ambient humidity | 35~95%RH(Nocondensation) | |||||
| Protectioncircuit | SurgeprotectioncircuitOvercurrentprotectioncircuit | |||||
| Material | Cas/Nut ickel latedrsshe iae alelonnsinsufaPB standard ableGray) polyiny | |||||
| Cable | 2.8,3P,2m | 3.8,3P,4P2m （AWG22oredammNbe（AW2orediam.mmb（A22Credam | 4.8,3P,4P2m | |||
| ofcores:22,Insulatordiameter:1.25 | ofcores:25,Insulatordiameter:1.25 | ofcores:30,Insulatordiameter:1.25 | ||||
| Protection | IP67 | |||||
AppearanceandDimension
Model NumberStructure
Features
Insidesurgeprotection,reversepolarityprotection Longuse-lifecycleandhighreliability,easyinstallenconomicprice RedLEDstatusindication,easytoconfirmworksituation Protection structureIP67(IECstandard)
| Item | Code | Description |
| ①Company code | C | Company code |
| ②Product name | Magneticsensor | |
| ③Shape of shell | Y | Cylinder-shaped |
| ④ Dimension code | 12 | 12=M12 |
| ③Product type | Without | High-end type |
| ? Detectiondistance | 10 | 10=10mm |
| Output mode | K | AC2wires |
| L | DC2wires | |
| ③Output state 技人品牌设计 | A | NO |
| B | NC | |
| ww.ircis.com C | NO+NC | |
| Without | Without:Leadwire | |
| Connection | T | Plug-in |
| R | Wiring leadsPlug-in |
Specifications
| Specifications | |||||
| Model | CXY08-1KA | CXY12-10KA | CXY18-10KA | CXF18-1KA | |
| Sensing distance | -62733710mm | 10mm | 10mm | 10mm 人 | |
| Hysteresis | 3-20% | ||||
| Consumptioncurrent | Max.10mA | ||||
| Powersupply (Operating voltage) | 12-240VDC/AC | ||||
| Response frequency | 100Hz | ||||
| Residualvoltage | Max.3V | ||||
| Affection by Temp. | Max.±10%forsensingdistanceatambient temperature20℃ | ||||
| Controloutput | Max.200mA | ||||
| Insulationresistance | Min.50MQ(at 500VDCmegger) | ||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | ||||
| Vibration | 1mmamplitudeatfrequencyof10to55Hz（for1min.）ineachofX,YZdirectionsfor2hours | ||||
| Shock | 500m/s（approx.50G)X,Y,Zdirectionsfor3times | ||||
| Indicator | Operationindicator(redLED) | ||||
| Ambient temperature | -15~+55C (No icing) | ||||
| Storagetemperature | 0577-62733721 -15~+55 c (No icing)片反十 | ||||
| Ambient humidity | 35~95%RH(No condensation) | ||||
| Protection circuit | Surgeprotection circuit | ||||
| Material | CasNticel ldrsielronssn andarablerayPliny | ||||
| Cable | 2.8,2P,2m 3.8,2P,2m | 中4.8,2P,2m | |||
| (AWG2Coef3 | |||||
| Protection | IP67 | ||||
Appearance and Dimension
CGY Photoelectric Sensor Cylindrical Type
CCEU
Features
Darkgreymark forstandard type Bluegreenmarkforhigh-end type
ExclusivelydesignedICforimprovinganti-jammingcapability Insidesurgeprotection,reversepolarityprotection Longuse-lifecycleandhighreliability,easyinstall,enconomicprice RedLEDstatusindication,easytoconfirmworksituation ProtectionstructureIP65（IECstandard)
| Item | Code | Description |
| ①Companycode | C | Companycode |
| ②Product name | G | Photoelectric sensor |
| ③Shape of shell | Y | Cylinder-shaped |
| ④Dimensioncode | 18 | 18=M18 |
| Product type | Without | Without=High-end type（Darkgrey) |
| Installation form | E | E=Standard type（Ricewhite） |
| D | Diffuse-reflectivetype | |
| R | Retro-reflectivetype | |
| Detection distance | T | Through-bethod type |
| ⑧Outputmode | 2 | 2=2m |
| K P | AC2wires | |
| N | PNP3wires | |
| NPN3wires Relay | ||
| A | ||
| NO | ||
| 投品牌设计 0577-627337 www.jrcis | com BC | NO+NC |
| Connection | Without T | Without:Leadwire |
| R | Plug-in WiringleadsPlug-in |
Note:ShlntscaeustmizednickelplatedbrasmaterialproducmodellusBexamlGY8B
CGY Photoelectric Sensor Cylindrical Type
Specifications
| Diffuse-reflective type | ||||||||||
| Model | 牌设计 High-end type | jrcis.com CGY12-D05NA CGY12-D05NB CGY12-D05PA CGY12-D05PB | CGY12-D10NA CGY12-D10NB CGY12-D10PA CGY12-D10PB | CGY18-D10NA CGY18-D10NB CGY18-D10NC CGY18-D10PA CGY18-D10PB CGY18-D10PC CGY18-D10KA | CGY18-D30NA CGY18-D30NB CGY18-D30NC CGY18-D30PA CGY18-D30PB CGY18-D30PC CGY18-D30KA | CGY30-D50NA CGY30-D50NB CGY30-D50NC CGY30-D50PA CGY30-D50PB CGY30-D50PC CGY30-D50KA | CGY30-D70NA CGY30-D70NB CGY30-D70NC CGY30-D70PA CGY30-D70PB CGY30-D70PC CGY30-D70KA | |||
| Standard type | CGY12E-D05NA CGY12E-D05NB CGY12E-D05PA CGY12E-D05PB | CGY12E-D10NA CGY12E-D10NB CGY12E-D10PA CGY12E-D10PB | CGY18-D10KB CGY18E-D10NA CGY18E-D10NB CGY18E-D10NC CGY18E-D10PA CGY18E-D10PB CGY18E-D10PC | CGY18-D30KB CGY18E-D30NA CGY18E-D30NB CGY18E-D30NC CGY18E-D30PA CGY18E-D30PB CGY18E-D30PC | CGY30-D50KB CGY30E-D50NA CGY30E-D50NB CGY30E-D50NC CGY30E-D50PA CGY30E-D50PB CGY30E-D50PC | CGY30-D70KB CGY30E-D70NA CGY30E-D70NB CGY30E-D70NC CGY30E-D70PA CGY30E-D70PB CGY30E-D70PC | ||||
| Sensing distance | 5cm | (Adjustabl) | CGY18E-D10KA CGY18E-D10KB 10cm | CGY18E-D30KA CGY18E-D30KB (Adjustabl) 3-20% | CGY30E-D50KA | CGY30E-D50KB 50cm | CGY30E-D70KA CGY30E-D70KB (Adjustabl) | |||
| Hysteresis Light source | ||||||||||
| InfraredLED（880nm) | ||||||||||
| Consumption current | Max.25mA | |||||||||
| Power supply (Operatingvoltage) | 10-30VDC/90-250VAC | |||||||||
| Response time | ||||||||||
| Residual voltage | DC Max. 1/AC Max.10V5片卑设十 057-6273.20M | |||||||||
| Affection by Temp. Control output | Max.±10%forsensingdistanceatambienttemperature20℃ | |||||||||
| Insulationresistance | Max.200mA Min.50MQ（at500VDCmegger) | |||||||||
| Dielectricstrength | 1500VAC50/60Hzfor1minute | |||||||||
| Vibration | 1mmamplitudeatfrequencyof10to55Hz（formin.）ineachof,Zdirectionsfor2hours | |||||||||
| Shock | 500m/s（approx.50G）X,directionsfor3tme | |||||||||
| Indicator | Operationindicator(red LED) | |||||||||
| Ambienttemperature | -15~+55'℃ (No icing) | |||||||||
| Storagetemperature | -15~+55℃ (No icing) | |||||||||
| Ambient humidity | 35~95%RH(Nocondensation) | |||||||||
| Protectioncircuit | Surgeprotectioncircuit,Overcurrentprotectioncircuit | |||||||||
| Material | Case/Nut: AB sensig surace PMAistansan abl(graghlPrdiv chorde(VC) oirsistan able(Black) | |||||||||
| Cable | 3.8,3P,2m | Φ4.8,2P,3P,4P2m | ||||||||
| High-end type（AWG22,Corediameter:0.1mmumber | ||||||||||
| ofore1 | (AWG22,Corediameter:0.1mm,Numberofcores:30,Insulatordiameter:1.25 Φ4.8,2P,3P,4P 1.5m | |||||||||
| Stadd | (AWG22,Corediameter:0.1mm,Numberofcores:30,Insulatordiameter:Φ1.25 | |||||||||
| 技 Protection | IP65 | |||||||||
CGY Photoelectic Sensor Cyindrical Type
Specifications
Retro-reflectivetype
| 牌 计 | vj7rcis.com | ||||||||
| High-end type | CGY12-R1NA CGY12-R1NA CGY12-R1PB | CGY18-R2NA CGY18-R2NC CGY18-R2PA CGY18-R2PC CGY18-R2KA | CGY30-R4NA 支人 CGY30-R4NC CGY30-R4PA CGY30-R4PC CGY30-R4KA | ||||||
| Model | Standardtype | CGY12E-R1NA CGY12E-R1NB | CGY18-R2KB CGY18E-R2NA CGY18E-R2NB CGY18E-R2NC CGY18E-R2PA CGY18E-R2PB | CGY30E-R4PB | CGY30-R4KB CGY30E-R4NA CGY30E-R4NB CGY30E-R4NC CGY30E-R4PA | ||||
| CGY12E-R1PB | CGY18E-R2PC CGY18E-R2KA CGY18E-R2KB | CGY30E-R4PC CGY30E-R4KA CGY30E-R4KB | |||||||
| Sensing distance Hysteresis | 1m | 2m 3-20% | 4m | ||||||
| Light source | InfraredLED（880nm) | ||||||||
| Consumptioncurrent | Max.25mA | ||||||||
| Power supply | |||||||||
| (Operating voltage) | 10-30VDC/90-250VAC | ||||||||
| Responsetime | |||||||||
| Reflector | TD02 中A设计 | ||||||||
| Residual voltage | DCMax.1V/ACMax.10V | ||||||||
| Affection by Temp. | Max.±10%forsensingdistance at ambient temperature20℃ | ||||||||
| Controloutput | Max.200mA | ||||||||
| Insulationresistance | Min.50MΩ(at500VDCmegger) 1500VAC50/60Hzfor1minute | ||||||||
| Dielectric strength Vibration | |||||||||
| Shock | 1mmamplitudeatfrequencyof0to55Hz（for1min.）ineachofX,YZdirectionsfor2hours 500m/s²(approx.50G）X,Y,Zdirectionsfor3times | ||||||||
| Indicator | Operationindicator(redLED) | ||||||||
| Ambienttemperature | -15~+55C (No icing) | ||||||||
| Storage temperature | -15~+55 C (No icing) | ||||||||
| Ambient humidity | 35~95%RH(Nocondensation) | ||||||||
| Protection circuit | Surgeprotectioncircuit,Overcurrentprotectioncircuit | ||||||||
| Material | Case/Nt ABasher Plsic esigsuaoiastadard ablrayPliny chlordeVC oilrestant | ||||||||
| Cable | High-end type | 3.8,3P,2m | 中4.8,2P,3P,4P2m | ||||||
| A22r (AWG22,Core diameter:0.1mm,Numberofcores:30,Insulatordiameter:1.25 | |||||||||
| 技 | Standard type | AG2 | |||||||
| ofcores:25,Insulator diameter:1.25 | |||||||||
CGY Photoelectric Sensor Cyindrical Type
| Specitications Through-bethod type | ||||||||
| 牌 type | 发计 High-end | ww.jrcis.com CGY12-T3NA CGY12-T3NB CGY12-T3PA | CGY18-T5NA CGY18-T5NC CGY18-T5PA CGY18-T5PB | CGY18-T10NA CGY18-T10NC CGY18-T10PA CGY18-T10PB | CGY30-10NA CGY30-T10NC CGY30-T10PA CGY30-T10PB | CGY30-T15NA CGY30-T15NC CGY30-T15PA CGY30-T15PB | ||
| Model | CGY12-T3PB | CGY18-T5PC CGY18-T5KA CGY18-T5KB CGY18E-T5NA CGY18E-T5NB CGY18E-T5NC | CGY18-T10PC CGY18-T10KA CGY18-T10KB CGY18E-T10NA CGY18E-T10NB CGY18E-T10NC | CGY30-T10PC CGY30-T10KA CGY30-T10KB CGY30E-T10NA CGY30E-T10NB CGY30E-T10NC | CGY30-T15PC CGY30-T15KA CGY30-T15KB CGY30E-T15NA CGY30E-T15NB CGY30E-T15NC | |||
| type | Standard | CGY12E-T3NA CGY12E-T3NB CGY12E-T3PA CGY12E-T3PB | CGY18E-T5PA CGY18E-T5PB CGY18E-T5PC CGY18E-T5KA CGY18E-T5KB | CGY18E-T10PA CGY18E-T10PB CGY18E-T10PC CGY18E-T10KA CGY18E-T10KB | CGY30E-T10PA CGY30E-T10PB CGY30E-T10PC CGY30E-T10KA CGY30E-T10KB | CGY30E-T15PA CGY30E-T15PB CGY30E-T15PC CGY30E-T15KA CGY30E-T15KB 15m | ||
| Sensing distance | 3m 5m 10m 10m | |||||||
| Hysteresis | 3-20% | |||||||
| Light source | Infrared LED(880nm) | |||||||
| Consumption current | Max.40mA | |||||||
| Power supply (Operating voltage) | 10-30VDC/90-250VAC | |||||||
| Responsetime Residual voltage | ||||||||
| DCMax.1V/ACMax.10V www.jrcis.com 0577-62733721 中用设计 | ||||||||
| Affection by Temp. Controloutput | Max.±10%forsensingdistanceatambient temperature20℃ Max.200mA | |||||||
| Insulationresistance | Min.50MΩ(at500VDCmegger) | |||||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | |||||||
| Vibration Shock | 1mmamplitudeatfrequencyof10to55Hz（for1min.）ineachofX,YZdirectionsfor2hours | |||||||
| Indicator | 500m/s（approx.50G）X,Y,Zdirectionsfor3times Operationindicator(redLED) | |||||||
| Ambient temperature | -15~+55 C (No icing) | |||||||
| Storagetemperature | -15~+55C(No icing) | |||||||
| Ambienthumidity | 35~95%RH(No condensation) | |||||||
| Protectioncircuit | SurgeprotectioncircuitOvercurrentprotectioncircuit | |||||||
| Material | Case/Nut AB sensingsuface PMA tanad able(Gray)Pieyiy chlordePVC) oilrestant cable(Blacky il | |||||||
| Cable Protection | 3.8,3P,2m | |||||||
| Hndy Insulatordiameter:1.25 | 4.8,2P,3P,4P2m | |||||||
| (AWG22,Corediameter:0.1mm,Numberofcores:30,Insulatordiameter:1.25 4.8,2P,3P,4P1.5m | ||||||||
| Standard e | 3.8,3P,1.5m | |||||||
| Insulatordiameter:1.25 | (AWG22,Core diameter:0.1mm,Numberof cores:30,Insulatordiameter:中1.25 | |||||||
Appearance and Dimension
Appearance and Dimension
CGF Photoelectric Sensor Square Type
CCEACU
Features
Blackmarkforstandardtype Darkgreymarkforhigh-end type
ExclusivelydesignedICforimprovinganti-jammingcapability Insidesurgeprotection,reversepolarityprotection Longuse-lifecycleandhighreliability,easyinstallenconomicprice RedLEDstatusindication,easytoconfirmworksituation ProtectionstructureIP65（IECstandard)
Model NumberStructure
| Item | Code | Description |
| ①Company code | C | Companycode |
| ②Product name | G | Photoelectric sensor |
| ③Shape of shell | F | Square |
| ④Dimension code | 50 | 50=Square50 |
| Product type | Wthut | tagre l |
| Installationform | D | Diffuse-reflectivetype |
| R | Retro-reflective type | |
| T | Through-bethod type | |
| Detection distance | 4 | 4=4m |
| ⑧Outputmode | K | AC2wires |
| P N | PNP3wires | |
| J | NPN3wires | |
| 0577-627337 uputsae牌设计 | Relay | |
| www.jrciscom A | NO | |
| B | NC | |
| Connection | C | NO+NC |
| Without | Without:Leadwire | |
| T | Plug-in | |
| R | Wiring leadsPlug-in |
CGF Photoelectric Sensor Square Type
Specifications
Difuse-reflective type
| Model | ||||||
| High-end type jrcis.com Standard type | CGF50-D30JC CGF50E-D30JC | CGF70-D50JC CGF70E-D50JC | ||||
| Sensing distance | 30cm(adjustable) | 50cm(adjustable) | ||||
| Hysteresis | 3-20% | |||||
| Light source | Infrared LED(880nm) | |||||
| Consumption current | Max.25mA | |||||
| Power supply | 24-250VDC/AC(High-end type) | |||||
| (Operating voltage) | 10-30VDC/90-250VAC(Standardtype) | |||||
| Response time | ||||||
| Residual voltage | Max.1V Max.±10%forsensingdistanceatambienttemperature20℃ | |||||
| Affectionby Temp. Control output | 3A | |||||
| Insulationresistance | Min.50MQ(at500VDCmegger) | |||||
| Dielectric strength | 1500VAC 50/60Hz for 1minute 卑设计 0577-62733721 | |||||
| Vibration | 1mmamplitudeat frequencyof10to55Hz（for1min.）ineachofX,directionsfor2hours | |||||
| Shock | 500m/s²（approx.50G)x,Y，Zdirectionsfor3times | |||||
| Indicator | Operation indicator(redLED) | |||||
| Ambienttemperature | -15~+55℃ (No icing) | |||||
| Storagetemperature | -15~+55'℃ (No icing) | |||||
| Ambient humidity | 35~95%RH(No condensation) | |||||
| Protection circuit | Surge protectioncircuit | |||||
| Material | ||||||
| Cable | High-end type | 3.8,3P,4P2m | 6,5P,2m | |||
| 0(AG22Coredleme25. Insulatordiameter:1.25) | 0.1A2eda | |||||
| Standard type | 3.8,3P,4P1.5m (AWG2ore diaeer | Insulatordiameter:1.25) 6,5P,1.5m | / | |||
| 0.1A2redamee | ||||||
| Insulatordiameter:中1.25) Insulatordiameter:1.25) | ||||||
| Protection | IP65 | |||||
Specifications
| Diffuse-reflective type | |||||||
| 牌设计 type | High-end | W.jrcis.CGF30-D30NA 27337 | CGF30-D30NB CGF30-D30NC CGF30-D30PA | CGF50-D30NA CGF50-D30NB CGF50-D30NC | CGF70-D50NA 人 CGF70-D50NB CGF70-D50NC CGF70-D50PA CGF70-D50PB | ||
| Model | CGF30-D30PB CGF30-D30PC | CGF50-D30PA CGF50-D30PB CGF50-D30PC | |||||
| Standard type | CGF30E-D30NA CGF30E-D30NB CGF30E-D30NC CGF30E-D30PA CGF30E-D30PB | CGF50E-D30NA CGF50E-D30NB CGF50E-D30NC CGF50E-D30PA CGF50E-D30PB | CGF70-D50PC CGF70E-D50NA CGF70E-D50NB CGF70E-D50NC CGF70E-D50PA CGF70E-D50PB | ||||
| CGF30E-D30PC CGF50E-D30PC | |||||||
| Sensing distance | 30cm(Adjustable) 50cm(Adjustable) | ||||||
| Hysteresis Light source | 3-20% InfraredLED(880nm) | ||||||
| Consumption current | Max.25mA | ||||||
| Power supply | 10-30VDC | ||||||
| (Operatingvoltage) Responsetime | |||||||
| Residual voltage | Max.1V | ||||||
| Affection by Temp. | Max.±10%forsensingdistanceatambienttemperature20C www.jrcis.com | ||||||
| Controloutput | Max.200mA | ||||||
| Insulationresistance | Min.50MQ(at 500VDCmegger) | ||||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | ||||||
| Vibration | 1mmamplitudeatfrequencyof10to55Hz（for1min.）ineachofX,directionsfor2hours | ||||||
| Shock Indicator | 500m/s²（approx.50G)X,Y,Zdirectionsfor3times Operationindicator(redLED) | ||||||
| Ambient temperature | -15~+55C (No icing) | ||||||
| Storagetemperature | -15~+55 C (No icing) | ||||||
| Ambient humidity | 35~95%RH(No condensation) | ||||||
| Protectioncircuit | Surgeprotectioncircuit,Overcurrentprotectioncircuit | ||||||
| Material | C | ||||||
| 3.8,3P,4P2m | |||||||
| 6,3P,4P,2m | |||||||
| Cable | |||||||
| Standard type(AWG22,Corediameter:0.1mm,Number（AWG22,Corediameter0.1mm,Number | |||||||
| Protection | ofcores:25,Insulator diameter:1.25) LoJh | of cores:22,Insulatordiameter:1.25 |0577-62733721 IP65 | |||||
CGF DulPhotoelectric Sensor Square Type
Specifications
Retro-reflective type
| High-end type jrcis.com Standard type | CGF50-R4JC | CGF70-R5JC | 技人 | |||
| 62733721 | CGF50E-R4JC | |||||
| Sensingdistance | 4m | CGF70E-R5JC 5m | ||||
| Hysteresis | 3-20% | |||||
| Light source | Infrared LED(880nm) | |||||
| Consumption current | Max.25mA | |||||
| Powersupply | 24-250VDC/AC(High-endtype) 10-30VDC/90-250VAC(Standardtype) | |||||
| (Operating voltage) Response time | ||||||
| Reflector | TD08 | |||||
| Residual voltage | Max.1V | |||||
| Affection by Temp. | Max.±10%forsensingdistanceatambienttemperature20℃ | |||||
| Controloutput | 3A | |||||
| Insulationresistance | Min.50MΩ(at500VDCmegger) | |||||
| Dielectric strength | 150A 00h to mu设计0m | |||||
| Vibration | 1mmamltudeatfrqencyf10t55Hzfrmin.）ineachofdirectionsfr2ou | |||||
| Shock | 500m/s(approx.50G)X,Y,Zdirectionsfor3times | |||||
| Indicator | Operationindicator(redLED) | |||||
| Ambient temperature | -15~+55C(No icing) | |||||
| Storagetemperature | -15~+55 C (No icing) | |||||
| Ambient humidity | 35~95%RH(No condensation) | |||||
| Protectioncircuit | Surgeprotection circuit, | |||||
| Material | ||||||
| Cable | High-endtype | 3.8,3P,4P2m 6,5P,2m | / | |||
| 0.2edfs | 02e dae | |||||
| Insulaordimer: 125 | ||||||
| Standard type | 02e d | Insulatordiameter:1.25) Insulatordiameter:1.25 | 0.22e damee | |||
| Protection | IP65 | |||||
技人品牌设计1577-6273721
CGF UPhotoelectricSensorSquareType
| Specifications Retro-reflective type | ||||||||
| 牌设计 High-end type | CGF30-R1NA CGF30-R1NAC | CGF5O-RA4NA | CGF7O-R5NA CGF70-R5NC | 技人 | ||||
| CGF50-R4NC | ||||||||
| Model | Standard type | CGF30-R1PB | CGF50-R4PB CGF50-R4PC CGF50E-R4NA CGF50E-R4NB | CGF70-R5PB CGF70-R5PC CGF70E-R5NA CGF70E-R5NB | ||||
| CGF30-R1PC CGF30E-R1NA CGF30E-R1NB | ||||||||
| CGF30E-R1NC CGF30E-R1PB CGF30E-R1PC | CGF50E-R4NC CGF50E-R4PB CGF50E-R4PC | CGF70E-R5NC | CGF70E-R5PB CGF70E-R5PC | |||||
| Sensing distance | 1m | 4m | 5m | |||||
| Hysteresis Light source | 3-20% | |||||||
| Consumption current | InfraredLED（880nm) | |||||||
| Max.25mA | ||||||||
| (opersug votage) | 10-30VDC | |||||||
| Response time | ||||||||
| RelectorHigh-end type | Standard type | TD05 | ||||||
| TD08 TD09 | ||||||||
| Residual voltage | Max.1V www.jrcis.com | |||||||
| Affection by Temp. | Max.±10%for sensing distance at ambient temperature20℃ 0577 6273372 | |||||||
| Controloutput | Max.200mA | |||||||
| Insulationresistance | Min.50MQ(at 500VDCmegger) | |||||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | |||||||
| Vibration Shock | 1mmamplitudeatfrequencyof0to55Hz（for1min.）ineachofX,directionsfor2hours | |||||||
| Indicator | 500m/s²（approx.50G)X,Y,Zdirectionsfor3times Operation indicator（red LED) | |||||||
| Ambient temperature | -15~+55C (No icing) | |||||||
| Storagetemperature | -15~+55 C (No icing) | |||||||
| Ambient humidity | 35~95%RH(Nocondensation) | |||||||
| Protection circuit | Surgeprotectioncircuit,Overcurrentprotectioncircuit | |||||||
| Material | Case:ABS,Sensing surface:PMMA,Standardcable(Gray):Polyvinylchloride(PVC), Oil resistantcable(Black):OilresistantPolyvinylchloride(PVC) | |||||||
| Cable | High-end type | 3.8,3P,4P2m 6,3P,4P,2m (AWG22,Core diameter: (AWG22,Corediameter: | ||||||
| 0.1mm,Numberofcores:25, Insultredapeter1212) | 0.1mm,Number of cores:22, Insulator damper: 125 | |||||||
| 技 | stadadbpe | |||||||
CGF DulPhotoelectric Sensor Square Type
Specifications
Through-bethod type
| Model | w27337.20m | CGF5O-T10JC | CGF70-T15JC | |||
| Sensingdistance | 10m | 15m | ||||
| Hysteresis | 3-20% | |||||
| Light source | InfraredLED（880nm) | |||||
| Consumptioncurrent | Max.50mA | |||||
| Powersupply (Operating voltage) | 24-250VDC/AC(High-endtype) 10-30VDC/90-250VAC(Standardtype) | |||||
| Responsetime | ||||||
| Residual voltage | Max.1V | |||||
| Affection by Temp. | Max.±10%forsensingdistanceat ambient temperature20C | |||||
| Control output | 3A | |||||
| Insulationresistance | Min.50MQ(at 500VDCmegger) | |||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | |||||
| Vibration | 1mm ampltudea frequencyof 10 to55Htformin) ineach oXdiretions for2hour3.Cm | |||||
| Shock | 500m/s²(approx.50G)x.Y,Zdirections for3times | |||||
| Indicator | Operationindicator(redLED) | |||||
| Ambient temperature | -15~+55 C (No icing) | |||||
| Storage temperature | -15~+55C (No icing) | |||||
| Ambienthumidity | 35~95%RH(No condensation) | |||||
| Protection circuit | Surge protection circuit | |||||
| Material | Case:ABS,Sensing surface:PMMA,Standardcable(Gray):Polyvinyl chloride（PVC) Oilresistantcable(Black):OilresistantPolyvinylchloride(PvC) | |||||
| Cable | High-end type | 3.8,3P,4P2m (AWG22,Core diameter: | 6,5P,2m (AWG22,Corediameter: | |||
| 0.1mm,Numberof cores:25 Insulatordiameter:中1.25) 3.8,3P,4P1.5m | 0.1mm,Number of cores:22 Insulatordiameter:1.25 | |||||
| Standard type | 0.12eda | 0.1m2e d | 6,5P,1.5m | / | ||
| Protection | Insulatordiameter:1.25) Insulatordiameter:1.25 IP65 | |||||
CGF photoelectric Sensor Square Type
Specifications
| Through-bethod type | |||||||
| 牌 Model | 计 High-end type | /731s.CGF30.T5NA CGF30-T5NC | CGF50-T10NA CGF50-T10NC CGF50-T10PA CGF50-T10PB | CGF70-15NA 5人 CGF70-T15NC CGF70-T15PA CGF70-T15PB CGF70-T15PCA | |||
| CGF30-T5PA CGF30-T5PB CGF30-TSPC CGF30E-T5NB | |||||||
| Standard CGF30E-T5NC | CGF50-T1PCA CGF50E-T10NB CGF50E-T10NC | ||||||
| type | CGF30E-T5PA CGF30E-T5PB CGF30E-T5PC | 5m | CGF50E-T10PA CGF50E-T10PB CGF50E-T10PC 10m | CGF70E-T15PA CGF70E-T15PB CGF70E-T15PC 15m | |||
| Sensing distance Hysteresis | |||||||
| Light source | 3-20% | ||||||
| Consumptioncurrent | InfraredLED(880nm) Max.40mA | ||||||
| Power supply | 10-30VDC | ||||||
| (Operating voltage) Responsetime | |||||||
| Residual voltage | Max.1V | ||||||
| Max.±10%forsensingdistanceatambienttemperature20℃ www.jrcis.com | |||||||
| Affection by Temp. Controloutput | 57/- 273372 Max.200mA | ||||||
| Insulationresistance | Min.50MQ(at 500VDCmegger) | ||||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | ||||||
| Vibration | 1mmamplitudeatfrequencyof10to55Hz（for1min.）ineachofX,Zdirectionsfor2hours | ||||||
| Shock | 500m/s²（(approx.50G)x,Y,Z directions for 3times | ||||||
| Indicator | Operationindicator(redLED) -15~+55C (No icing) | ||||||
| Ambienttemperature | -15~+55℃(No icing) | ||||||
| Storagetemperature | 35~95%RH(Nocondensation) | ||||||
| Ambient humidity | Surgeprotectioncircuit,Overcurrentprotectioncircuit | ||||||
| Protection circuit | |||||||
| Material | Ca 3.8,3P,4P2m Φ6,2P,3P,4P,2m | ||||||
| Cable | |||||||
| Protection | 10577-62733721 IP65 | ||||||
Appearance and Dimension
Appearance and Dimension
Model NumberStructure
技人品牌设计 w6.7rcis.com
Features
Blackmarkforstandardtype Darkgreymarkforhigh-endtype
ExclusivelydesignedICforimproving anti-jammingcapability nsidesurgeprotection,reversepolarityprotection Longuse-lifecycleandhighreliability，easyinstallenconomicprice RedLEDstatusindication,easytoconfirmworksituation ProtectionstructureIP65(IECstandard)
| Item | Code | Description |
| ①Companycode | C | Companycode |
| ②Product name | G | Photoelectricsensor |
| ③Shape of shell | U | Utype |
| ④Dimension code | 07 | 7mmGroovewidth7mm |
| Product type | Without | Without=High-end type（Dark grey shell) |
| E | E=Standard type（Black shell) | |
| ? Detectiondistance | 07 | 7=7mm |
| Outputmode | K | AC2wires |
| P | PNP 3wires | |
| N | NPN3wires | |
| J | Relay | |
| outputste片牌设计 0577-627337 | A | NO |
| www.jrcis.com B | NC | |
| Connection | C | NO+NC |
| Without | Without:Leadwire | |
| T | Plug-in | |
| R | Wiring leads Plug-in |
Specifications
| 牌设计1等 Model | High-endtype | CGU07-07NA CGU07-07NC | CGU10-10NA CGU10-10NA CGU10-10PB | CGU30-30NA CGU30-30NC | ||
| CGU30-30PB CGU30-30PC CGU30E-30NA | CGU50-58NA CGU50-50NC CGU50-50PB CGU50-50PC CGU50E-50NA | |||||
| Standard type | CGU07E-07NA | CGU07E-07NB CGU07E-07NC CGU07E-07PB | CGU10E-10NA CGU10E-10NA CGU10E-10PB | CGU30E-30NB CGU30E-30NC CGU30E-30PB CGU30E-30PC | CGU50E-50NB CGU50E-5ONC CGU50E-50PB CGU50E-50PC | |
| Sensingdistance | CGU07E-07PC 7mm | 10mm | 30mm | 50mm | ||
| Lightsource | InfraredLED(Modulation) | |||||
| Consumption current | Max.15mA | |||||
| Power supply (Operating voltage) | 10-30VDC | |||||
| Responsetime | ||||||
| Residual voltage | Max.1V | |||||
| Affection by Temp. | Max.±10%forsensing distance atambient temperature20℃ | |||||
| Controloutput | Max.200mA www.ircis.com | |||||
| Insulationresistance | 0577-62733721 Min.50MΩ(at 500VDCmegger) | |||||
| Dielectric strength | 1500VAC50/60Hzfor1minute | |||||
| Vibration Shock | 1mmamplitudeatfrequencyof10to55Hz（for1min.）ineachofX,Zdirectionsfor2hours 500m/s’（approx.50G）X,Y，Zdirectionsfor3times | |||||
| Indicator | Operationindicator(redLED) | |||||
| Ambienttemperature | -15~+55C(No icing) | |||||
| Storagetemperature | -15~+55℃ (No icing) | |||||
| Ambient humidity | 35~95%RH(Nocondensation) | |||||
| Protectioncircuit | Surgeprotectioncircuit,Overcurrentprotectioncircuit | |||||
| Material | CasABsinasaetararayrdlordC) | |||||
| Cable | High-end type | Φ4.8,3P,4P2m 3.8,3P,2m | ||||
| 0(A2oef3 Insulatordiameter:1.25 | 0.(A2oredfaeer Insulatordiameter:1.25 | 4.8,3P,4P2m (AWG22,Corediameter:0.1mm,Numberof cores:30, | ||||
| Insulatordiameter:1.25 | ||||||
| Standard type | 4.8,3P,4P1.5m (AG2oe dlame | 3.8,3P,1.5m 0(AWG2.Coredame2 | (AWG22,Corediameter:0.1mm,Numberof cores:30, | 4.8,3P,4P1.5m | ||
| Protection | Insulatordiameter:1.25 Insulatordiameter:1.25 IP65 | |||||
J×7八O0h车×L110577-62733721
CGU Photoelectric Sensor U Type (High-end type)
Appearance and Dimension
Appearance and Dimension
Tel:+8618857728107
Wechat/Whatsapp:+8618857728107
Landlinenumber:86-0577-61803776
Email:Market@cntd.com
Add.:NO.258.WeiElevenRoad,YueqingEconomic
DevelopmentZone,Yueqing City,ZhejiangProvince,P.R.China
THECATALOGUEISFORREFERENCEONLY
CNTDElectricTechnologyCo.,Ltdkeepsinnovating.Theinformationinthiscatalogue isforreference only.Please donot usethe catalogueasa formal installationguide.For installation,operation andmaintenance of unconventionalapplications,please consult the servicepersonnel of CNTDElectricTechnologyCo,Ltdforfurther support
PROPERUSEOFPRODUCT
Theproductmust be used in an environment ensures that the product'soperating parametersdonotexceed theratingvalue.Therisksassociatedwith thesysteminwhich theproduct is used should beanalyzed and controlled by multiple measures.Donot singlyuse theproductinsituationsinvolvingpersonal safety andpropertysafety suchas emergencystop device.
