该页无缩略图
PIANO
PIANOPLYWOOD WOOD & BAMBOO COLLECTION
CHINESE BUILDING MATERIAL EXPERT, ONE STOP SERVICE PROVIDER
ABOUT US
PIANOPLYWOOD
Our company's main products include Plywood, Film-faced Plywood, LVL, 3PLY, Blockboard, H20 Beam, Timber Wall panel, etc.
Applications: housing construction, building construction, bridge engineering, cement building formwork, home decoration and furniture, shopping shelves, packaging materials, handicraft supplies, container floors, stage formwork, outdoor construction, etc.
CE
CE
PianoPlywood
CHINESE BUILDING MATERIAL EXPERT, ONE STOP SERVICE PROVIDER
WWW.PIANOPLYWOOD.COM
Fax/Tel: +86-21-50792750
Phone/WhatsApp/WeChat: +86-133 1189 1208
E-mail: RobertWang@pianoplywood.com
Add: Block F,Floor 8,NO.58,New Jinqiao RD,Pudong District,Shanghai 201206,China
01 Construction Wooden Panel
02 Commercial Wooden Panel
03 Bamboo Product
04 Wood Pergola
05 Fence
06 Flooring
CONSTRUCTION WOODEN PANELPRODUCT SPECIFICATION INTRODUCTION
FILM FACED PLYWOOD
02 LEONKING 3 PLY SHUTTERING PANE
03 F17 LAMINATED VENEER LUMBER
04 H20 BEAM
05 TIMBER
06 CDX PLYWOOD
07 ANTI SLIP FILM FACED PLYWOOD
08 CIRCULAR FILM FACED PLYWOOD
09 PLASTIC FILM FACED PLYWOOD
MDO FILM FACED PLYWOOD
OSB-ORIENTED STRAND BOARD
12 PRESSURE TREATED TIMBER
FILM FACED PLYWOOD
PIANOPLYWOOD
PRODUCT CERTIFICATE
FORMAT SIZE
Customized size&Thickness
THICKNESS
Casting up to 30 times
MATERIAL
STANDARD
Free samples&Prompt delivery
Prov. cust. logo&Design
1220×2440 mm
6/9/12/15/18/21mm
Poplar / Eucalyptus / Birch / Pine / Hardwood / Finger joint
DENSITY
BS EN 314-2 / BS EN 315 / BS EN 316 / BS EN 636
500-700 kg/m³
8%-12%
WWW.PIANOPLYWOOD.COM
Eco-friendly&Visualization
MOISTURE CONTENT
High standards&Quality
INSTRUCTIONS FOR USE AND MAINTENANCE OF FORMWORK PANELS
USAGE
The formwork panels are mostly used in construction for concrete shuttering. Before usage, the user/contractor should check whether the panel surface quality is sufficient for the desired concrete surface quality. As the formwork panels are made of solid wood, wood texture can be visible on the concrete surface. Therefore, the formwork panel producer does not undertake any responsibility for the quality of the concrete surface. After use, traces of the edge protective varnish on the concrete surface may also be visible.
The panels are supported at intervals as specified in the diagram of intervals in the producer's brochure.
When assembling or disassembling formwork panels, utmost attention should be paid to minimising the damage to the panels through the use of saws, nails or other fasteners. You should also be careful not to damage the surface of the boards with a hammer or sharp objects. Such damages inevitably affect the quality of the concrete surface
Before applying concrete, the panels should always be treated with formwork oil and thoroughly moistened/sprinkled with water in order to minimise the risk of the concrete sticking to the panels. You should be very careful when removing the shuttering, especially if the panels are nailed, screwed or fastened in any other way. It is essential to prevent the falling of the panels from greater heights and any resulting damage which might occur.
• MAINTENANCE
After use, the panels should be cleaned of all residues and placed on a flat surface. For the protection of the shuttering, a paraffin paste or formwork oils should be used in accordance with the producer's instructions. The panels should be kept in a covered and shady place. If stored outdoors, the panels should be covered with a sheet (a tarpaulin plane) protecting them against harmful weather conditions (sun, rain). If the panels are exposed to the sun, splits and/or cracks may appear on the outer layer. Such panels must be properly moistened with water before next use!
Apart from that, fading (discolouration) may appear on the surface protection, which, however, does not significantly affect the functionality of the panel. Due to the components and the colours of wood, the panels may stain brownish when exposed to rain.
WARNING
In extreme weather conditions (significant deviations from normal humidity and temperature, or longer periods of dry and hot weather), you should take extra care of the shuttering, mostly making sure that the panels are not exposed to the heat of the sun for longer periods. Should you fail to do so, longitudinal cracks on the outer layer may appear, which significantly affect the lifetime of formwork panels and the quality of the concrete surface. Such panels should be properly moistened with water before use, otherwise, they might be permanently damaged due to the intrusion of the concrete emulsion into the cracks!
Moreover, wooden formwork panels contain certain wood components, such as tannic acid or resins, which might cause stains on the concrete surface.
CONCRETE FORMWORK SHUTTERING PANELS
■The largest range of products, the largest choice
Our sorting diversity can satisfy any customer need: 21 mm and 27 mm shuttering panels with and without galvanized edge protection (Metal or plastic), 27 mm shuttering panels with or without edge band, solid timber profiles with edge protection in dimensions of 20 mm, all in big and small size. The application possibilities go from ceiling boards to wall, bridge and tunnel formworks to work platforms.
3 Ply Shuttering Panel with Metal Corners
3 Ply Shuttering Panel with Metal Endling
Fax/Tel:+86-21-50792750
RobertWang@pianoplywood.com
WA BUSINESS
Casting up to 20 times
Customized size
Free samples&prompt delivery
High standards
FORMAT SIZE
LENGTH
WIDTH
THICKNESS
STANDARD
MATERIAL
3000×500×21/27mm，2000×500×21/27mm
1000/1970/2000/2500/2970/3000 mm
250 /450 /500 /1000 mm
21/27mm
Spruce / Fir /Pine
EN 13353 / EN 12775 / EN 314-2
WWW.PIANOPLYWOOD.COM
RobertWang@pianoplywood.com
3 PLY SHUTTERING PANEL
TECHNICA DATA
| Product | 3-ply yellow concrete formwork shuttering panelcoated with melamine resin that allows a resistantand smooth surface | Leonking panel 21 mmLeonking panel 27mm | ||
| Wood species | Spruce/Fir/Scotch Pine/Radiata Pine | |||
| Wood moisture | 12% ± 2% | |||
| Weight | 12 kg/m2 (27 mm) / 10kg/m2 (21 mm) | |||
| Formats (mm) | 1000x500 - 1500x500 - 2000x500 - 2500x500 - 3000x500 | |||
| Thickness (mm) | 21,27 | |||
| Surface protection | Highly resistant melanine coating, extremely smooth surface | |||
| Edge seal | Water repellent edge formork finish, yellow,red | |||
| Endling | without or Metal or Plastic | |||
| Packaging | Fir:21mm/120pcs package,27mm/96pcs package;Spruce:21mm/110pcspackage,27mm/88pcs package | |||
| Design values | Mechanical properties 21 | mm 27 | mm | |
| Minimal value | 40N/mm2 | 40N/mm2 | ||
| Modulus of elasticity(mean value) | 11000-12000 N/mm2 | 11000-12000 N/mm2 | ||
| Note | The values are calculated with a wood moisture of 12%. With heavy moisturepenetration up to fiber saturation point, the values for bending strenght and flexural modulusof elasticity may be up to 30% lower | |||
| L | |||||||||
| d=21 mm | 0.40 | 0.45 | 0.50 | 0.55 | 0.60 | 0.65 | 0.70 | 0.75 | |
| q | 5 kN/m2 | 0.11 | 0.17 | 0.26 | 0.38 | 0.54 | 0.75 | 1.00 | 1.32 |
| 10 kN/m2 | 0.21 | 0.34 | 0.52 | 0.77 | 1.08 | 1.49 | 2.01 | 2.65 | |
| 15 kN/m2 | 0.32 | 0.51 | 0.78 | 1.15 | 1.63 | 2.24 | 3.01 | 3.97 | |
| 20 kN/m2 | 0.43 | 0.69 | 1.05 | 1.53 | 2.17 | 2.99 | 4.02 | 5.30 | |
| 25 kN/m2 | 0.54 | 0.86 | 1.31 | 1.91 | 2.71 | 3.74 | 5.02 | 6.62 | |
| 30 kN/m2 | 0.64 | 1.03 | 1.57 | 2.30 | 3.25 | 4.48 | 6.03 | 7.95 | |
| 35 kN/m2 | 0.75 | 1.20 | 1.83 | 2.68 | 3.80 | 5.23 | 7.03 | 9.27 | |
| 40 kN/m2 | 0.86 | 1.37 | 2.09 | 3.06 | 4.34 | 5.98 | 8.04 | 10.59 | |
| L | |||||||||
| d=27 mm | 0.40 | 0.45 | 0.50 | 0.55 | 0.60 | 0.65 | 0.70 | 0.75 | |
| q | 5 kN/m2 | 0.05 | 0.08 | 0.12 | 0.18 | 0.26 | 0.35 | 0.47 | 0.62 |
| 10 kN/m2 | 0.10 | 0.16 | 0.25 | 0.36 | 0.51 | 0.70 | 0.95 | 1.25 | |
| 15 kN/m2 | 0.15 | 0.24 | 0.37 | 0.54 | 0.77 | 1.05 | 1.42 | 1.87 | |
| 20 kN/m2 | 0.20 | 0.32 | 0.49 | 0.72 | 1.02 | 1.41 | 1.89 | 2.49 | |
| 25 kN/m2 | 0.25 | 0.40 | 0.62 | 0.90 | 1.28 | 1.76 | 2.36 | 3.12 | |
| 30 kN/m2 | 0.30 | 0.48 | 0.74 | 1.08 | 1.53 | 2.11 | 2.84 | 3.74 | |
| 35 kN/m2 | 0.35 | 0.57 | 0.86 | 1.26 | 1.59 | 2.46 | 3.31 | 4.36 | |
| 40 kN/m2 | 0.40 | 0.65 | 0.98 | 1.44 | 2.04 | 2.81 | 3.78 | 4.98 | |
Fax/Tel: +86-21-50792750
RobertWang@pianoplywood.com
q = load
(N/m2) L = span (m)
d = 21 mm
E = 10000N/mm2 of extrapanel
with d=21 mm
K = 0.646 deformation factor contingent on number of fields for constant load
q = load
(N/m2) L = span (m)
d = 27 mm
E = 10000N/mm2 of extrapanel
with d=27 mm
K = 0.646 deformation factor contingent on number of fields for constant load
WA BUSINESS
PIANOPLYWOOD
3 PLY SHUTTERING PANEL
3 PLY SHUTTERING PANEL CORE
CORE TYPE - GRADE
\*Product grades (Grade S/A/B/C) are determined based on the following Key Performance Indicators: Structural strength, Weather resistance, Stability, Water absorption and Expansion Rate, Corrosion resistance, Demolding performance, Bonding firmness, Flatness, Service life, Wood species selection differentiation.
\*The only advantage of Knot-free wood in construction lies in its appearance, merely serving an aesthetic purpose.
There is no difference in the core performance between wood with Knots and without Knots.
PRODUCT COMPARISON
Meticulous craftsmanship and exquisite quality stem from everyone's dedication. We strictly control every production process and conduct comprehensive quality inspections to pursue flawlessness in every product.
CORE MATERIAL Molds & recycled, AD, Laminated, Grade C
STRUCTURE
Not 3 ply, but 3 ply + Rotary radiator pine veneer Face & Back It is easy to be peel off and attached to the wall,big distaster while demolding.
PRODUCT COMPARISON
Meticulous craftsmanship and exquisite quality stem from everyone's dedication. We strictly control every production process and conduct comprehensive quality inspections to pursue flawlessness in every product.
WOOD
The most important technical indicators and characteristics for construction concrete formwork are: strength, bending strength, bonding strength, demolding performance, water resistance, stability and weather resistance. Based on the same adhesive equipment and technical processes, different wood species result in products with significantly different quality levels.
| PerformanceIndicator | EuropeanSpruce | ScotchPine | Chinese Fir | New ZealandRadiata Pine |
| Density(kg/m³) | 380-440 | 420-480 | 350- 380 | 350-400 |
| Decay Resistance | Medium(requirestreatment) | Excellent(Natural1ydecay-resistant) | Poor (Proneto mold) | Poor (Prone tomold and insectattack) |
| Bending Strength(MPa) | 75-87 | 80- 90 | 55-60 | 60-70 |
| Fiber Length (mm) | 3.5-5.0(Fine,long,uniform) | 2.0 - 3.5(Straight grain) | 1.8 - 2.5(Short,thick) | 2.0- 3.0 (Thick,short) |
| Water Absorption &Expansion Rate (%) | 8- 10 | 7-9 | 12 - 15 | 15 - 18 |
| Workability | Excellent(Smoothcutting) | Good (Resin canstick to tools) | Medium(Prone toburrs) | Poor (Prone tocracks and marks) |
PRODUCT COMPARISON
Meticulous craftsmanship and exquisite quality stem from everyone's dedication. We strictly control every production process and conduct comprehensive quality inspections to pursue flawlessness in every product.
WITH KNOTS / KNOTS FREE?
KNOT-FREE
Both knot-free and with knots are available from pianoplywood
But
1. Construction concrete formwork is for temporary use, so with knots or knot-free is neither required nor relevant.
2. 3-ply shuttering panels (used by leading brands DOKA & PERI) adopt knotted spruce, and there is no standard grading by knot presence or absence.
Complete Service:
We provide one-stop service from standard panels to value-added products like corner protectors and end caps, and offer customized solutions like UV-protective packaging based on client storage conditions. We are committed to leveraging our over 20 years of expertise to provide tailored solutions that best fit each client's project needs
3 PLY SHUTTERING PANEL
FORMWORK PANEL WITH METAL ENDING
Solid Wood Panels
Joint-free surfaces for visually beautiful concrete quality The surface finish of our solid wood panels increase the life duration and allows an easy stripping and cleaning. The smooth surfaces gives furthermore visually beautiful concrete quality and joint-free surfaces. The edge protection with C-profile make solid wood panels more durable.
PRODUCT ADVANTAGES
Accurate & Stable Dimensions
With metal endling
Long service life
High structural strength
Environmental Protection
Waterproof
Long service life
PIANO 3-layered shuttering panels impress thanks to the high stability and dimensional accuracy. Both longitudinal external layers and the diagonal central layer are glued between them and water-resistant. Swelling or shrinking are almost excluded thanks to this structure. Optional edge protection and a high quality waterproofing impregnation further increase the durability and make stripping and cleaning easy.
Fax/Tel: +86-21-50792750
WA BUSINESS
3 PLY SHUTTERING PANEL
FORMWORK PANEL WITH PLASTIC ENDING
PACKING EFFECT
Fax/Tel: +86-21-50792750
3 PLY SHUTTERING PANEL
Fax/Tel: +86-21-50792750
PHN/WA/WX: +86-133 1189 1208
PIANOPLYWOOD
LEONKING 3 PLY SHUTTERING PANEL ACCESSORY
Tie rods, formwork clamps, tie-brackets and ties forpillar casting, nuts and cones.
Find the solution you need. Or discover new ones.
Formwork clamp 600-800mm weight 7,20kg
Iron spacers for wooden panels 100-1200mm R 70kg/mm2
Helicoidal stanchion 500mm weight 0,90kg
Stanchion pressed hook 500mm weight 0,85kg 1000mm weight 1,60kg 1500mm weight 2,40kg
Pre-galvanised U-shaped
element
630mm weight 1,00kg n2 holes
1130mm weight 1,80kg n°3
holes
Tie-brackets for pillar 150-450mm 500-950mm weight 2,35kg
200-400mm weight 9,30kg
250-500mm weight 10,40kg
250-600mm weight 11,90kg
400-800mm weight 16,50kg
600-1000mm weight 28,50kg
Galvanised wedge weight 0,115kg
Wedge for ties weight 0,40kg
WA BUSINESS
3 PLY SHUTTERING PANEL
| LEONKINGwww.pianoplywood.comE-mail:RobertWang@pianoplywood.com | material | Q235 | products | corner protectors |
| Thickness | 2.3cm | Drawing no. | U12353-20240301 | |
| Tolerance | +/-0.2mm | Standard | U12352 | |
| Size | 14.35*14*35*20.29 | Page | 1/4 | |
| Address: Block F,Floor 8,NO.58,New JinqiaoRD,Pudong District,Shanghai201206,China上海沁格建筑材料有限公司 | ||||
上海沁格建筑材料有限公司SHANGHAI QIN GE CERAMIC & BUILDING CO.,LTD.
WA BUSINESS
3 PLY SHUTTERING PANEL
| LEONKINGwww.pianoplywood.comE-mail:RobertWang@pianoplywood.com | material | Q235 | products | corner protectors |
| Thickness | 2.3cm | Drawing no. | U12353-20240301 | |
| Tolerance | +/-0.2mm | Standard | U12352 | |
| Size | 14.35*14*35*20.29 | Page | 2/4 | |
| Address: Block F,Floor 8,NO.58,New JinqiaoRD,Pudong District,Shanghai201206,China上海沁格建筑材料有限公司 | ||||
SHANGHAI QIN GE CERAMIC & BUILDING CO.,LTD.
WA BUSINESS
3 PLY SHUTTERING PANEL
| LEONKINGwww.pianoplywood.comE-mail:RobertWang@pianoplywood.com | material | Q235 | products | corner protectors |
| Thickness | 2.3cm | Drawing no. | U12353-20240301 | |
| Tolerance | +/-0.2mm | Standard | U12352 | |
| Size | 14.35*14*35*20.29 | Page | 3/4 | |
| Address: Block F,Floor 8,NO.58,New JinqiaoRD,Pudong District,Shanghai201206,China上海沁格建筑材料有限公司 | ||||
SHANGHAI QIN GE CERAMIC & BUILDING CO.,LTD.
WA BUSINESS
3 PLY SHUTTERING PANEL
| LEONKINGwww.pianoplywood.comE-mail:RobertWang@pianoplywood.com | material | Q235 | products | corner protectors |
| Thickness | 2.3cm | Drawing no. | U12353-20240301 | |
| Tolerance | +/-0.2mm | Standard | U12352 | |
| Size | 14.35*14*35*20.29 | Page | 4/4 | |
| Address: Block F,Floor 8,NO.58,New JinqiaoRD,Pudong District,Shanghai201206,China上海沁格建筑材料有限公司 | ||||
SHANGHAI QIN GE CERAMIC & BUILDING CO.,LTD
WA BUSINESS
PRODUCT DESCRIPTION ADJUSTABLE COLUMN CLAMPS
Adjustable Column Clamps is an innovative steel formwork clamp, which is applicable to the reinforcement of cast-in-situ reinforced concrete square column formwork commonly used in engineering construction.Such as mall,hospital,warehouse ...
Fax/Tel: +86-21-50792750
WA BUSINESS
WA BUSINESS WABLSINESS
ADJUSTABLE COLUMN CLAMPS
ADJUSTABLE COLUMN CLAMPS
SQUARE POST BUCKLE
Fax/Tel: +86-21-50792750
RobertWang@pianoplywood.com
WAPLSUNESS WA BUSINESS
INSTALLATION INSTRUCTIONS
STEP 1
Assemble the four panel pieces using the slots located at the panel edges. Secure the corner of the column formwork with the adjustable corner clamps, ensuring that all clamps are positioned at the same height.
Attach the column clamps to the corner clamps. Fasten the head of each column clamp into the bent end of the corresponding clamp. Ensure the column clamp is tightly aligned and flush with the beam.
Corrosion resistance
Customized size&thickness
Eco-friendly&visualization
Waterproof
FORMAT SIZE
2700/3600/4500/5400/6000/7200/9600/12000 mm
LENGTH
WIDTH
THICKNESS
STANDARD
MATERIAL
MOISTURE CONTENT
Up to 12000 mm
35/45/63/70/90/140/240mm
35/45/63mm
Larch / Spruce / Radiata pine
AS NZS 4357 / AS NZS 1080.1
BS EN 24829 / BS EN 14279
8%-12%
WWW.PIANOPLYWOOD.COM
RobertWang@pianoplywood.com
Environmentally friendly
Free samples&prompt delivery
Customized size&thickness
High standards
High quality
FORMAT SIZE
SIZE
200×80×40×27mm
MATERIAL
STANDARD
Flange size: 40 × 80 mm × 3000-5900 mm Web size: 27 / 90 ×120 mm×3000-5900 mm
Flange: sawed pine / spruce , LVL / timber Web：birch /poplar /larch，plywood
EN 13377 / EN 1993-1 / EN 10034
DENSITY
5.3-5.4 kg/m³
MOISTURE CONTENT
8%-12%
WWW.PIANOPLYWOOD.COM
RobertWang@pianoplywood.com
LEONKING LK20 and E-Ply Piano H20 formwork beams are solid web girders and subject to supervision level super a according to EN13377 & GB/T 28985-2012.
Monitoring and certification by material research laboratory at SGS-CSTC Standards Technical Services Co.,Ltd. Xiamen Branch and wood products quality & inspection center of state forestry and grasslang Adinstration (Nanjing).
Product range
Lengths:180,195, 250, 265, 275, 290, 300, 330, 360, 390, 450, 490, 590 cm
E-Ply Piano H20: protection cap possible up to 9 m – over 9 m only cut straight
LK20: rounding with sealing possible up to 9 m – over 9 m only cut straight
Special lengths possible up to 11.90 m
Characteristic limits
Lateral force Contact resistance Bending moment Rigidity I
Vk = 23.9 kN Rb,k = 47.8 kN Mk = 10.9 kNm E1 = 450 kNm²
Measurements
Size tolerance: height H=200 +/-2 mm Length tolerance: specified length +/- 10 mm
Weight: approx. 4.8 kg/m
WA BUSINESS
Permissible values:
Shear force
Q = 11 kN
The chords are mechanically tested for stress grading.
A support reaction
A = 22 kN
Bending moment
M = 5kN
Formwork beam features:
Girder length Manufacturer information: name, logo Custom labeling, client logos possible
Girder typesClassification
Monitoring level M
Product identification number
Country of origin
Measuring table forms:
To calculate table forms please see the
two tables to the right with the maximum permissible yoke, cross and support beam spacing. The specified influence lines may not be exceeded anywhere.
Measurement table:
Example:
Given: Ceiling thickness (20 cm) + cross-beam spacing (75 cm)
Sought: Yoke-beam spacing + support spacing
1 Ceiling thickness: 20 cm
2 Cross-beam spacing: 75 cm
3 Permissible yoke-beam spacing according to table 1 = 2.56 m
4 Select same or next smaller yoke-beam spacing in table 2 = 2.5 m
5 Choose value 2.50 in table 2, choose the value for ceiling thickness (20 cm) and read the permissible support spacing value: 1.2 m
6 Attention: The corresponding bearing capacity of the supports must be verified!
Regulations for installation:
The fitting of the formwork beams must be performed by professional and trained personnel in accordance with our application guidelines and safety instructions.
The permissible open span of the LK20 and the E-Ply Piano H20 may not exceed 4,0 m. The sheeting is to be nailed directly onto the upper chord.
Wooden formwork beams should only be utilized in an upright position and must be securely fastened to prevent tipping, as per static requirements.
Changes of the product are prohibited and can cause increased hazard potential.
Regulations of use:
Every item must be inspected by the installation firm and may only be used if in perfect condition.
Formwork beams that are damaged or weakened by decay are not to be used.
Please observe that the formwork beams should not be stored in a way that they are exposed to heavy climatic influences and should not be stored out side unprotected. A professional storage increases the general endurance and reduces deformation and crack formation.
Fax/Tel: +86-21-50792750
| lable Table 2 | |||||||||||||
| Cross-beam spacing (m) | Yoke-beam spacing (m) | ||||||||||||
| Forsseit ,cm) | Totlad2kN/m | ||||||||||||
| 0,500,630,670,75 | 1,001,251,501,752,00 2,252,503,003,50 | ||||||||||||
| Max. distance betwecross beams (m) | en | Max. distance between yoke-be= max. distance between ceiling su | ams (m)pport beams | ||||||||||
| 10..... | 4,40 | 3,633,373,2993,1 | 7 | 7 2,88 2,67 2,462,28 2,132,0111,9 | 1……1,67m1,43 | ||||||||
| 12 | 4,92 | 3,433,1993,123,0 | 02 | ,722,53 2,333 2,162,02 1,90 1, | 79…1,49m | 1,28 | |||||||
| 14 | 5,44 | 3,273,042,972,8 | 6 | 2,6002,412,41m2,05 | 1,921,80…… | 1,6… | 21,35m | 1,16 | |||||
| 16 | 5,96 | 3,142,922,85-++- | 2,7 | 4mm | 2,492,31……2,121,90... | 1,831,64 | 1,48...1,23m | 1,05 | |||||
| 18 | 6,48 | 3,032,812,752 | ,6 | 52,402,2222,031,88 | 1,701,51 | 1,361,13 | 0,97 | ||||||
| 20 | 7,00 | 2,932,722,66 | 2,562,32 | 2,14….1,95 | 1,80 | 1,57m1,40 | 1,21,05 | 0,90 | |||||
| 22 | 7,52 | 2,8422,642 | ,58 | 2,48 | 2,26 | 2,06 | 51,88 | 1,67… | 1,461,300 | 1,170,98 | 0,84 | ||
| 24 | 8,04 | 2,76……2,572 | ,51... | 2,42 | 2,192 | ,00 | 01,82 | 1,56……… | 1,3711,22 | 1,090,91mm | 0,78 | ||
| 26 | 8,56 | 2,702,50 | )2,45 | 2,35 | 2,14 | 1,93… | 1,71 | 1,47.... | 1,29m1,14…. | 1,030,86 | 0,73 | ||
| 28 | 9,08 | 2,63……2,442 | ,39 | 2,302 | ,09 | 1,881 | ,62 | 1,38 | 1,21111,0 | 0,978m.0,81 | 0,69 | ||
| 30 | 9,66 | 2,572,39 | 92,34 | 2,25 | 2,03 | 1,82… | 1,52 | 1,30 | 1,14mm1,01 | 0,91…0,76mm | 0,65 | ||
| 35 | 11,22 | 2,452,272 | ,23 | 2,14mm | 1,89 | 1,57 | 71,311 | 1,12 | 0,980,87 | 70,780,65 | 50,56 | ||
| 40 | 12,78 | 2,352,182 | ,13 | 2,04 | 1,721,38.….… | 1,15.1 | 0,98 | 0,860,770…. | 0,69.0,571 | 0,49 | |||
| 45 | 14,34 | 2,262,102 | ,04 | 1,531,23 | 1,02 | 0,883 | 0,77……0,68… | 0,610,51m | 0,44 | ||||
| 50 | 15,90 | 2,182,011 | ,94 | 1,381,11 | 0,922 | 0,790 | ,69 0,61 | 0,550…0,46 | 0,40 | ||||
Yoke-beam spacing
The diagram shows Grade S
FORMWORK H20 BEAM
DIFFERENCES IN THREE GRADES OF H20 BEAMS:
| GRADE S | GRADE AA | GRADE A | ||
| WEB | Pine LaminatedVeneer Lumber(LVL), Grade F17 | Pine LaminatedVeneer Lumber(LVL), Grade F11 | Spruce Core3 Ply ShutteringPanel | Combi CoreCrossbandingPlywood |
| DENSITY | 750 kg/m³ | 650 kg/m³ | 470 kg/m³ | 600 kg/m³ |
| ELASTICMODULUS(MPA) | ≥14000 | ≥10500 | ≥10000*Full-length | ≥8000*Full-length |
| SUPPORTLENGTH | Full-length LVL | ≤ 3m Full-length≥ 3m Spliced together | ≤ 2.5m Full-length≥ 2.5m Spliced together | |
| WEIGHT | 5.2 kgs/m | 5.1 kgs/m | 4.9 kgs/m | 5.0 kgs/m |
| FLANGE | Superior quality Spruce finger jointed solid wood timber | |||
| OTHERS | Phenolic adhesive,With Fully Enclosed Plastic Heads on Both Ends | |||
Unit: mm
WA BUSINESS
Environmentally friendly
Customized size&thickness
LENGTH
WIDTH
THICKNESS
MATERIAL
STANDARD
PROCESS
Free samples&prompt delivery
Up to 12000 mm
2400/3000/3600/4200/4800/6000/7200/12000 mm
50/75/100/125/150/175/200/225/250/300mm
47/75/100mm
Douglas fir/ spruce/ fir/ radiated pine larch/ Mongolian pine/ birch/ ash basswood/ walnut/ cherry/ oak/ southern yellow pine
BS 4978 / EN 14081 / ISO 737
ISO 1029 / ISO 2299 / ISO 4470
Pressure treated / Carbonized
WWW.PIANOPLYWOOD.COM
High standards&quality
RobertWang@pianoplywood.com
Fax/Tel: +86-21-50792750
CDX PLYWOOD
PIANOPLYWOOD
PRODUCT CERTIFICATE
Environmentally friendly
Customized size&thickness
Free samples&prompt delivery
High standards
FORMAT SIZE
THICKNESS
OTHER SIZE
2.7-24 mm
Customized size and thickness
STANDARD
BS EN 314-2 / BS EN 315 / BS 6566 / EN 13353 / EN 12775
DENSITY
MOISTURE CONTENT
500-630 kg/m³
8%-12%
WWW.PIANOPLYWOOD.COM
RobertWang@pianoplywood.com
PRODUCT CERTIFICATE
ANTI SLIPFILM FACED PLYWOOD
PIANOPLYWOOD
Environmentally friendly
Customized size&thickness
FORMAT SIZE
THICKNESS
MATERIAL
STANDARD
DENSITY
MOISTURE CONTENT
Free samples&prompt delivery
High standards
1200×2400mm/1220×2440mm/1250×2500mm
9/12/15/18/20/21/25mm
Poplar / Eucalyptus / Birch / Pine / Combi
BS EN 314-2 / BS EN 315 / BS EN 316 / BS EN 636
500-700 kg/m³
8%-12%
WWW.PIANOPLYWOOD.COM
CIRCULAR FILM FACED PLYWOOD
PIANOPLYWOOD
PRODUCT CERTIFICATE
Customized Size & Thickness & Diameter
Environmentally friendly
FORMAT SIZE
DIAMETER
LENGTH
THICKNESS & DIAMETER
MATERIAL
STANDARD
Free samples&prompt delivery
300-3000 mm ×1000-3000 mm× 14-18 mm / 20-22 mm
Prov. cust. logo&design
300-3000 mm
1000×3000 mm
14-18 mm & 300-1200 mm / 20-22 mm & 1200-3000 mm
Poplar / Eucalyptus / Birch / Pine / or Other hardwood
BS EN 314-2 / BS EN 315 / BS EN 316 / BS EN 636
WWW.PIANOPLYWOOD.COM
RobertWang@pianoplywood.com
High standards&quality
Fax/Tel: +86-21-50792750
Casting up to 30 times
Customized size&thickness
Free samples&prompt delivery
Customized multiple colors
Eco-friendly&visualization
FORMAT SIZE
LENGTH
1220×2440mm(4'×8')/1250×2500mm
1525/1830/2135/2400/2440/2500/3000/3050 mm
WIDTH
THICKNESS
STANDARD
DENSITY
MOISTURE CONTENT
610/915/1200/1220/1250/1500/1525 mm
6-35 mm
BS EN 314-2 / BS EN 315 / BS EN 316 BS EN 636 / EN 13353
500-680 kg/m³
8%-12%
WWW.PIANOPLYWOOD.COM
RobertWang@pianoplywood.com
MDO
FILM FACED PLYWOOD
PIANOPLYWOOD
PRODUCT CERTIFICATE
Environmentally friendly
Customized size&thickness
FORMAT SIZE
THICKNESS
LENGTH
WIDTH
STANDARD
DENSITY
Free samples&prompt delivery
High waterproof
1220×2440mm/1250×2500mm
9-25 mm
1830/2440/2500/3000/3050 mm
610/915/1220/1250/1500/1525 mm
BS EN 314-2 / BS EN 315 / BS EN 316 BS EN 636 / EN 13353
500-530 kg/m3
WWW.PIANOPLYWOOD.COM
RobertWang@pianoplywood.com
High standards&quality
ORIENTED STRAND BOARD
PIANOPLYWOOD
PRODUCT CERTIFICATE
Environmentally friendly
Customized size&thickness
FORMAT SIZE
LENGTH
Free samples&prompt delivery
WIDTH
High waterproof
1220×2440 mm/2100×280 mm/1830×2440 mm
THICKNESS
2440 /2800 mm
1220/1830 /2100 mm
STANDARD
9-25 mm
SURFACE DESIGN
APA PS1-95 / ANSI 117 / ANSI A190.1
ANSI/APA RPG 320 / ANSI 405 / EN314-2
Melamine paper(glossy / matt / embossed etc.) Beech / Oak / Walnut / Maple / Teak / Cherry / Lvory or as request
WWW.PIANOPLYWOOD.COM
Visualization
High standards&quality
RobertWang@pianoplywood.com
Fax/Tel: +86-21-50792750
PRODUCT OSB-Oriented Strand Board
OSB sheathing panels provide dimensional stability and stiffness for wall and roof sheathing applications. These panels have strong and uniform consistency throughout. Plus, they have a blue edge seal that helps prevent moisture-related issues such as edge swell.
•Every piece meets the highest grading standards for strength and appearance •No core voids, knots, or splits
•Multi-layered bonding provides exceptional dimensional stability and stiffness •Panels offer strength, racking and impact resistance, and uniformity
| Format | 2500*1250,2440*1220mm ,(customizable according to requirements)9,12,15,18mm ,(Customizable according to reuirements) |
| Thickness | |
| Emission Class | E1 (EN ISO 12460-5) |
| certificate | FSC/CE/CARB/ISO 9001 |
| standard | EN 300-type OSB 3/EN 13501-1:class B-s1,d0/EN 13986:2004+A1:2015 |
| Application | 1.Structural applications:walls,floors,roofs,staircases,hoardings,2.Interior:furniture elements,decorative elements inindoor spaces,framework in upholstered furniture,door panels,claddings and partition walls , 3.Packaging:shipping boxesand containers,pallets, 4.Retail & exhibitions , 5.Warehouse management(shelving,racking,etc.) |
Fax/Tel: +86-21-50792750
OSB-ORIENTED STRAND BOARD
OSB 2
OSB 2 is developed and manufactured entirely in compliance with the current demand of ecological living focused on organic materials. Selecting suitable wood and binder, OSB 2 meets high standards of not only environmental buildings.
OSB 3
OSB 3 is the most progressive OSB type that is currently available. OSB 3 is developed and manufactured entirely in compliance with the current demand of ecological living focused on organic materials. Selecting suitable wood and binder, OSB 3 meets high standards of not only environmental buildings.
Fax/Tel: +86-21-50792750
RobertWang@pianoplywood.com
WA BUSINESS
PRESSURE TREATED TIMBER
PIANOPLYWOOD
PRODUCT CERTIFICATE
CE
Corrosion resistance
Customized size&thickness
LENGTH
Free samples&prompt delivery
High waterproof
Up to 12000 mm
WIDTH
50/75/100/125/150/175/200/225/250/300mm
THICKNESS
Visualization
MATERIAL
TREATMENT AGENT
47 / 75/100 mm
PROCESS
Douglas fir / Spruce / Fir / Radiated pine / Larch / Mongolian pine / Birch / Ash/ Basswood / Walnut / Cherry / Oak / Southern yellow pine
CCA/ACQ/CA-B/CBA/Cu8/CuN/BAC/Cu+DDAC / Arsenic / Permethrin / Cypermethrin /Deltamethrin / Creosote / Bifenthrin / TBTO Or TBTN
WWW.PIANOPLYWOOD.COM
Pressure treated / Carbonized
High standards&quality
RobertWang@pianoplywood.com
CE
| Use category | Use condition | Use environment | Main biological wood-destroying agencies | Typical use | |
| C1 | H1 | Indoor; kept clearof soil | Used in indoor dry environment; free of effect from weather andmoisture | Moth | Building interior, decorationand furniture |
| C2 | H2 | Indoo; kept clearof soil | Used in indoor environment,sometimes under the effect ofmoisture but free of weather effect | Moth,termite and wood-destroying fungi | Buildinginterior,decoration,furniture,basement and toilet |
| C3 | H3 | Outdoor; keptclear of soil | Used in outdoor environment and exposed to variousweathers,including shower but not immersed in water for a longterm | Moth,termite and wood-destroying fungi | Deck(of platform,walkway andtrestle),outdoor furniture andexterior door and window(ofbuilding) |
| C4A | H4 | Outdoor ; exposedto soil orimmersed in freshwater | Used in outdoor environment,exposed to various weathers,andcontacted with the ground or immersed in fresh water for a longterm. | Moth,termite and wood-destroying fungi | Fence column,support,woodenhouse foundation,coolingtower,electic pole andjamb(pitprop) |
| C4B | H5 | Outdoor ;exposedto soil orimmersed in freshwater | Uesd in outdoor environment,exposed to various weathers,andcontacted with the ground or immersed in fresh water for a longterm.Structural component which is difficult to replace or thecrutucal one. | Moth.termite and wood-destroying fungi | (Fresh water)Pier fender,pileand jamb(pitprop) |
| C5 | H6 | Lmmersed inseawater(saltwater) | Lmmersed in seawater(salt water)for a long term. | Marine boring animal | Seawater(salt water)pierfender,pile and wooden boat |
| Length | Up to 12 meters(customized according to requirements) |
| Width/thickness | Customizable according to reuirements |
| Treatment agent | CCA/ACQ/CA-B/CBA/Cu8/CuN/BAC/Cu+DDAC/Arsenic/Permethrin/Cypermethrin/Deltamethrin/Creosote/Bifenthrin/TBTO or TBTN |
| Standard | H2F/EN-350-2-1994 |
| Material | Pine/Radiata Pine/Red pine/Larch/fir/spruce/southern pines/Douglas fir/ Hemlock/Mason pine |
| Application | 1.Anticorrosive wooden flower racks and boxes;2.Anticorrosive wooden corridor,3.Anticorrosive wood flooring,4.Anticorrosive wooden tables and chairs,and anti-corrosion wooden stools |
RobertWang@pianoplywood.com
WA BUSINESS
CONTENTS
01 FILM FACED PLYWOOD
02 UV COATING BIRCH PLYWOOD
03 CDX PLYWOOD
04 TWIN PLYWOOD
05 LVL-LAMINATED VENEER LUMBER
06 LVL SCAFFOLDING PLANKS
MELAMINE FILM PANEL
08 BENDABLE PLYWOOD
09 FIRE RETARDANT PLYWOOD
FANCE VENEERY OVERLAY PLYWOOD
HPL OVERLAY PANEL
POLYESTER PANEL
3 BLOCKBOARD
TEXTURED PLYWOOD
FILM FACED PLYWOOD
PRODUCT FILM FACED PLYWOOD
PIANO
CE
Our Piano |Singer | Leonking plywood produce all kinds of plywood and blockboard for clients from all over of world based on different standard and system. Format sizes are 1220×2440 /1250×2500 / 610×2500 / 1500×3000 / 1525×1525 mm, thickness from 9mm to 30mm, or customized.
FILM FACED PLYWOOD:
Includes normal film faced plywood, one side anti slip film faced plywood, circular film faced plywood and plastic overlay film facedplywood.Meanwhile, we can produce melamine/phenolic glue overlay plywood too. Main purposes are for concrete formwork, decking, box, and store/warehouse shelves
An example of the variety of suitable uses for our special coated plywood include:
Cement-Formwork Template SystemSmooth-shuttering,moulds,furniture Mesh-Vehicle bodies,walkways,staging
Hexa-vehicle bodies,flight cases,packaging Diamond-Flight cases,packaging
| Format Size | 1220x2440/1250x2500/610x2500/1500x3000/1525x1525mm1525/1800/1830/2400/2440/2500/3000/3050mm |
| Length | |
| Width | 500/610/915/1200/1220/1250/1500/1525mm9 /12 /13/15/17 /18 /20 /21mm /CustomizedCE / FSC / ISO 9001 / CARB / PEFC |
| Thickness | |
| Certificate | |
| Standard | SI 37 / EN 314-2 / EN 636 / EN 315 / EN 316 / EN 13353 / KS F 3101 / JAS 475 / Grade F4 Star / AS 6669 / AS NZS 2269 / CSA 0153 / GBT 9846 |
| Grade | Australia F17 / Japan F4 Star |
| Core | Poplar / Eucalyptus / Pine / Birch / Hardwood / Combi / Finger joint |
| Packing | Carton Packing / HDF Double Layers / Plywood Packing / PE Film Packing / PP Bag Packing |
| Film | Black Film / Anti-Slip Film / Plastic Film / MDO HDO Film / LOGO Film / Red Film / Brown Film / Adhesive Coating |
| Application | Formwork / Moulds / Furniture / Joinery / Box & Pallet |
WA BUSINESS
INSTRUCTIONS FOR USE AND MAINTENANCE OF FORMWORK PANELS
USAGE
The formwork panels are mostly used in construction for concrete shuttering. Before usage, the user/contracto should check whether the panel surface quality is sufficient for the desired concrete surface quality. As the formwork panels are made of solid wood, wood texture can be visible on the concrete surface. Therefore, the formwork panel producer does not undertake any responsibility for the quality of the concrete surface. After usetraces of the edge protective varnish on the concrete surface may also be visible.The panels are supported at intervals as specified in the diagram of intervals in the producer's brochure.
When assembling or disassembling formwork panels, utmost attention should be paid to minimising the damage to the panels through the use of saws, nails or other fasteners. You should also be careful not to damage the surface of the boards with a hammer or sharp objects. such damages inevitably affect the quality of the concrete surface.
Before applying concrete, the panels should always be treated with formwork oil and thoroughly moistened/sprinkled with water in order to minimise the risk of the concrete sticking to the panels. You should be very careful when removing the shuttering especially if the panels are nailed, screwed or fastened in any otheiway. It is essential to prevent the falling of the panels from greater heights and any resulting damage which migh occur.
MAINTENANCE
After use, the panels should be cleaned of all residues and placed on a flat surface. For the protection of the shuttering, paraffin paste or formwork oil should be used in accordance with the producer's instructions. The panels should be kept in a covered and shady place. If stored outdoors, the panels should be covered with a sheet, such as a tarpaulin, protecting them against harmful weather conditions (sun, rain). If the panels are exposed to the sun, splits and/or cracks may appear on the outer layer. Such panels must be properly moistened with water before next use! Apart from that, fading (discolouration) may appear on the surface protection, which, however, does not significantly affect the functionality of the panel. Due to the components and the natural colour of the wood, the panels may become brown-stained when exposed to rain.
WARNING
In extreme weather conditions (significant deviations from normal humidity and temperature, or longer periods of dry and hot weather) you should take extra care of the shuttering, mostly making sure that the panels are not exposed to the heat of the sun for longer periods. Should you fail to do so, longitudinal cracks on the outer layer may appear, which significantly affect the lifetime of formwork panels and the quality of the concrete surface. Such panels should be properly moistened with water before use; otherwise they might be permanently damaged due to the intrusion of the concrete emulsion into the cracks! Moreover, wooden formwork panels contain certain wooden components, such as tannic acid or resins, which might cause stains on the concrete surface.
Fax/Tel: +86-21-50792750
UV COATING BIRCH PLYWOOD
PRODUCT UV COATING BIRCH PLYWOOD
PIANO
UV Coating Birch Plywood UV finish will add toughness and protection against scrapes and chips.The high quality birch plywood with its extra durability is usable in the production offurnitureand cabinet components as well as for laser cutting.
■PRODUCT FEATURES
• High bending strength
• Strong nail holing
• Moisture resistant and easy work
• Tight construction and high strength
• Laser cutting
• Low formaldehyde emission
Die making
• Suitable for indoor furniture & floor or decoration use
| Format Size: | 1220*2440mm (customized according to requirements). |
| Thickness: | 9mm – 22mm (customized according to requirements). |
| Core: | Birch, poplar, combi, hardwood, eucalyptus. |
| Gloss level | UV High - gloss 80% |
| (upon customer's | UV Medium – gloss 35% UV Light – gloss 20% |
| request) | UV Special - gloss upon customer's request |
| Standard | CE,FSC,CARB,ISO 9001,SGS,BS 1088,AS/NZS 2272,PEFT,EN 314,BS EN 350,ISO 14001, EN 315. |
| Application | Furniture , floor , decoration , drawer sides , cabinet components and interiors , laser cutting , die making. |
Fax/Tel: +86-21-50792750
RobertWang@pianoplywood.com
ADVANTAGES LASER CUTTING UVCOATING BIRCH PLYWOOD
Flatness is good. The thickness tolerance of the whole board ≤0.2mm
Can effectively prevent the lossof moisture while ensuring the surface is clean
Easy forlaser machinecutting Easy for laser machine cutting Excellent user experience
Fax/Tel: +86-21-50792750
CDXPLYWOOD
PRODUCT CDX PLYWOOD
PIANO
Application:
CDX Plywood is the most used product in the construction industry for the foundation of building and roofing due to its sturdy nature.
It is dense and heavy due to pressing a large number of plies together, making it a preferred and cost-effective solution.
Pianoplywood is a leading producer of CDX Plywood in China focus on a high-quality product and service.
CDX is a specific type of plywood and not a thickness indicator.
•1/4-inch - thinner plywood will break. For CDX plywood, you shouldn't use anything less than 1/4-inch, which works for indoor projects and cabinetry.
•3/8-inch - only slightly more significant than the minimum safety allowance. If you want something that won't break without adding too much, this will work.
•1/2-inch – very common. 1/2-inch plywood is the most common size, and if you're unsure which size you need, then 1/2-inch will work for any project.
•5/8-inch – also typical for most projects. While not as popular as the next larger or smaller size, it does work well. If it's available, then go for it. You won't regret the decision.
•3/4-inch - ideal for thickness, but isn't too wide for most projects. The plywood isn't recommended for interior projects due to its weight.
For exterior projects, this works well.
•1-inch and more -if it's thicker than 1-inch, you should know beforehand what your project will entail. Projects requiring greater durability would use plywood thicker than 1-inch. Projects requiring greater durability will use plywood thicker than 1-inch.
CDX stands for:
•C - veneer grade for one strip of plywood.
•D - veneer grade for one strip of plywood.
•X-glue used to connect both veneers. This makes the plywood
durable and rugged. It has nothing to do with "exterior."
| Format Size | 1220x2440mm (4'x8')/ 915x2135mm (3'x7') |
| Other Size | Customized |
| Thickness | 2.7-24mm / Customized |
| Certificate | CE / FSC / ISO 9001 / CARB / PEFC |
| Standard | BS EN 6566 / EN 314-2 / EN 636 / EN 315 / EN 316 / EN 13353 / EN 12775 / SI 37 |
| Moisture content | 8%-12% |
| Density | 500-630kg/m³ |
| Core | Poplar / Eucalyptus / Pine / Hardwood / Combi |
| Application | packing/construction/structural Indoor decoration: flooring/wall/ceiling/etc. Furniture: table/door/chair/bed/cabinet/etc. |
Fax/Tel: +86-21-50792750
RobertWang@pianoplywood.com
www.pianoplywood.com
WA BUSINESS
RobertWang@pianoplywood.com
CDX PLYWOOD
FREQUENTLY ASKED QUESTIONS (FAQ)
Is OSB The Same As CDX Plywood?
OSB is not the same as CDX plywood. While they can both be used for similar projects, they aren't entirely interchangeable.
What Happens if CDX Plywood Gets Wet?
CDX plywood is made for outdoor use. It can absorb water without harming the wood and will dry out quickly. But it should always have a moisture barrier in place and be covered with some type of covering, like roofing.
Is CDX Plywood The Best Plywood?
CDX is considered the best in many cases. However, there isn't a number one plywood overall. There is simply the best plywood for each job. The prettiest is A grade, while the strongest is D grade.
Is CDX Plywood Treated?
CDX plywood is not necessarily treated. You will need to look for the term “pressure-treated" on the plywood itself if you want to know. The plywood grade is not related to whether it is treated.
Is CDX Plywood Fire-Rated? CDX plywood is better to use near fires than other plywood. But the treatment is really what affects the fire-rating. Treated wood is more fire-resistant than untreated wood, so check for this detail.
What Is The Difference Between CDX And ACX Plywood?
The difference is that ACX plywood will have a pretty and delicate side, while CDX will look much rougher. One side of the ACX plywood will be sanded and smooth.
Fax/Tel: +86-21-50792750
WA BUSINESS
