Features

·Certifiedto EN1154Grade8
China XF93-2004 fire protection
·Closing & latching speed adjustable.
·Hold open sliding rail arm.
·Backcheck Action
·Suitable for Door size EN3,door weight 80kg ·Max door width 950mm
·Max opening angle: 1 2 0 ^ { \circ }
·Finish: Sliver

Construction Details

·Aluminium Housing Closer Body ·Steel Track Arm

\* Hold Open Arm not suitable for fire rated doors \*Consult Stanley Technical Services for door closer accessories

STANLEY

Features

·Certifiedto EN1154 Grade8 China XF93-2004 fire protection
·Cam system operated with high quality spring to provide a smooth precise action & minimum wear
·Closing & latching speed adjustable.
·Hold open sliding rail arm.
·Suitable for Door size EN2-4，door weight 4 0 { - } 8 0 \mathsf {kg }
·Max door width 1 1 0 0 \mathsf {mm }
·Max opening angle： 1 2 0 ^ { \circ }
·Finish: Sliver

\* Hold Open Arm not suitable for fire rated doors \* Consult Stanley Technical Services for door closer accessories

Features

·SGDC50 is ideally suited for use on light or mediumduty doors for commercial or residential applications
·Non-handed unit.
·Totally reversible without any adjustment
·Available with standard arms or hold-open arms.
·Adjustable for door sizes 2/3/4 by Shoe / Template adjustment.
·Closing speed range 180-15°
·Latching speed range 1 5 ^ { \circ } - 0 ^ { \circ } （204号
·Suitable for Door size 2/3/4
Size #2: Door width of 850mm&Weight of 40kg Size#3:Door width of 950mm&Weight of 60kg Size #4: Door width of 1100mm&Weight of 80kg

\* Hold Open Arm not suitable for fire rated doors \*Consult Stanley Technical Services for door closer accessories

STANLEY

PANICDEVICES

1. SCOPE

1.1This standard establishes requirements for exit devicesand trim,automatic and self-latching flush bolts，removable mulions，coordinators,and carry-open bars.Performance criteria include cycle, operational,strength,material evaluation,and finish tests．Functions and types are described and numbered.

1.2Tests described in this standard are performed under laboratory conditions.Inactual usage,results varybecause of installation,maintenance and environmental conditions.

2. GENERAL

2.1All products certified to this standard shall be listed or labeled bya Nationally Recognized Testing Laboratory (NRTL) and be subject to periodic examination service.

2.2Exit devices are available in Grades 1,2,and 3 with grade 1 being the highest grade.Allare suitable forall classesof buildings and are basedon the performance tests listed.A Grade1 exit device shall be furnished withall Grade1 trim andcylinders,when supplied,inorder to retainan overall Grade1rating. A Grade2exit device shallbe furnished with grade2,or higher,trim and cylinder inorder to retain an overall Grade 2 rating;and similarly for Grade 3 rating.

2.3Door coordinators Type 21A are available in Grade 1 and 2．Door coordinators Type 21B are available in Grade2.Both Grades are suitable forallclasses of buildings and are based on performance tests listed.

2.4Carry-open bars are available in Grades 1 and 2.Both are suitable for all classes of buildings and are based on the performance test listed.When coordinators are installed with carry-open bars,the Grade of the combination is the lower Grade of either component.

2.5All exit devices shall meet the requirements and performance tests found in Underwriters Laboratories,Inc.StandardUL3o5-Panic Hardware-2004,

2.6The cycling requirements listed shall not be considered as being in addition to those required by UL305 but comprise the total required.

2.7Values Required values in this Standard are given in US units.The SI (metric) equivalents are approximate.All values which do not carry specific tolerances or are not marked maximum or minimum shall have the following tolerances:Linear dimensions shall be ± 1 / 1 6 in 1 . 6 {mm } ).Pounds or pound force shall be ± 5 % ：Angular measurements shall be ± 4 degrees.Voltage measurements shall be ± 5 percent. Temperature measurements shall be ± 4 degreesF( ± 2 degrees C).

2.9Reference to ANSI Standards ANSI Standards are available from the American National Standards Institute,11 W.42nd Street,New York,NY 10036 or www.buildershardware.com.

2.10Related StandardsANSI/BHMA A156.1 for Buttsand Hinges,A156.5 for Auxiliary Locks, A156.16 for Auxiliary Hardware,A156.18 for Materialsand Finishes,A156.24 for Delayed Egress Devices,A156.25for Electrified Locking Devices,A156.29 for ExitLocks,Exit Alarms,Alarms For Exit Devices.Definitions of some other terms used in this Standard are found in ANSI/SDI A250.7 Nomenclature for Steel Doors and Steel Door Framesand ANSI/NFPA8O Fire Doorsand Windows.

12. COORDINATORANDCARRY-OPENBARTESTS

12.1 Tests shallbe performed using pairs of doors no smaler than described in 7.1.Frames and hardware shallbe in accordance with 7.2,7.4,and 7.5.For tests that include acarry-open bar,anastragal with a minimum of 3/4 in.( ( 1 9 \ {mm } ) ）overlap shall be applied to the pull side of the active leaf.Install the coordinator and carry-open bar in accordance with the manufacturer's published instalation instructions.

12.2 Cycle Test When cycle testing a coordinator,doors shallbe pushed open separately to not less than a 60 degrees open position,then released sequentially so that the active leaf is first to engage the coordinator.When cycle testinga coordinator and carry-open barcombination,the inactive leaf shall be pushed at a speed not to exceed 5 degrees per second and to not less thanan open position2O degrees beyond the point where the carry-open bar breaks contact with the active leaf,then released.For subsequent cycles,the inactive leaf shall be opened at any speed to not less than an open position 20 degrees beyond the point where the carry-open bar breaks contact with the active leaf,then released.

12.3In alltests,during the closing sequence,the active leaf shallbe held open by the coordinator hold open device fora minimum ofone(1) second and shall alow the inactive leaf to swing past the active leaf and activate the coordinator release,and the active door shallclose against the stop.An opening and closing operation shall constitute one (1) cycle.The coordinator or carry-open bar or both shall complete the specified cycles without failure.Failure of the coordinator to perform any closing sequence constitutes failure ofthe entire coordinator test.Failure of the carry-open bar to perform any one opening sequence or failure to bypass any one coordinated active leaf constitutes failure of the carry-open bar test.Failure of the coordinator to prevent marring of the door face by wearing through any strike during the cycle test constitutes failure of the entire coordinator and remaining cycles shall be discontinued.

12.4 Override Function Test Type 21A coordinators equipped with override mechanisms shall complete the cycles required in 7.9.2.1.With the device at the factory preset position,or iffield setat the midpoint seting,restrain the inactive leaf inan open position.Open the active leaf until the hold open device on the coordinator is fuly projected.At the furthest point from the hinges or pivots,push on the active leaf until theoverride mechanismreleases.With the inactive leaf stillrestrained in the open position,manually open the active leaf a minimum of 6O degrees.Release the active leaf.The active leaf shall remain held in the openposition by thecoordinator.Perform this test prior to thecycle test,after every25,Ooo cycles,and at the completion of the cycle test.Failure of the overrde mechanism to release or failure ofthe active leaf to be held open by the coordinator constitutes failure ofthe function test.Failure of any one of the function tests constitutes failure of the entire coordinator test and any remaining cycles shallbe discontinued.

STANLEY

Features

·Tested to EN1125 Grade7, GB30051-201390mins firerated
·Available in Rim& Surface Vertical rod type Stainless Steel Construction
·High shock-resistant latching mechanism for protectionagainst vandalism
·All inside components are of high rustresistant
alloy& heavily electroplated steel toavoid corrosion
·All devicesare non-handed
·External access trimsareavailablewithdifferent functions
·Exit Alarmavailable

SGPD250VR

SurfaceVerticalRodExitDevice StainlessSteelPush-bartype

External Trim

STANLEY

STANLEY

Hinges

Installation Standard

·Topreference distance from hinge center to door frame: 1 2 7 \mathsf {mm } （204 -Bottom reference distance from hinge center to the floor: 2 5 4 \mathsf {mm }

Precautions on Hinge Selection

·Distinguishing tongued-and-grooved door from flat-top door;
-Materials of door panelsand door frame;
·Hand of door, left hand or right hand;
·Door weight;
-Door width;
·Door thickness;
·Door height.

Determining leaves,height,and unfolded width of hinge

How to determine the leaves of hinge:

·Door height <= 1 5 2 4 \mathsf {mm } 2 leaves · 1 5 2 4 ~ { {mm } } ≤door height <= 2 2 8 6 \ \mathsf {mm } \ 3 leaves ： 2 2 8 6 ~ \mathsf {mm s } doorheight <= 2 0 4 8 \ \mathsf {mm } 4 leaves ·One more leaf shall be added if the door width falls into the range 9 4 0 ~ {mm } ~ 1 2 1 9 ~ {mm } （204号

1. SCOPE

1.1This Standard establishes requirements for lightweight,standard weight,heavy weight and detention hinges.Cycle tests,lateraland vertical wear tests,friction tests,strength tests,finish tests,and materialand dimensional requirementsare included.

1.2Tests described in this Standard are performed under laboratory conditions.In actual usage,results vary because of installation,maintenance and environmental conditions.

1.3Consult NFPA 80-1999 for Fire Doors and Windows concerning hinge requirements for fire doors.

2. DEFINITIONS

2.1 Bearings

2.1.1Anti-Friction Bearing Bearing material between the Various moving parts of a hinge.

2.1.2Plain Bearing (non anti-friction bearing)．When no bearing material is between the various moving parts of a hinge.

2.2 Butt Hinge See Full Mortise Hinge

2.3Detention Hinge A hinge having higher security atributes than conventional hinges and subject to more stringent tests.These hinges are usually constructed with a maximum security pin.Alternate designs which meet the higher security attributes are acceptable.

2.4Full Mortise HingeAhinge having one leaf mortised into the hinge edge ofadoor and the other leaf mortised into the rabbet of a frame.

2.5FullSurface Hinge A hinge having one leaf attached to the face ofa doorand the otherleaf attached to the face of a door frame.

2.6Half Mortise Hinge A hinge having one leaf mortised into the hinge edge ofadoor and the other leaf attached to the face of a door frame.

2.7Half Surface Hinge A hinge having one leaf atached to the face of adoor and the other leaf mortised into the rabbet ofadoor frame.

2.8Hospital Tips A hinge barrel having sloped ends.

2.9Maximum Security Pin (MSP)A hinge pin that has been fixed after insertion by welding,pinning,or other permanent means to prevent hinge pin removal without the use of special tools.Set screws are not permitted.Affords greater security than a Non-Removable Pin.

2.10 Non-Removable Pin (NRP)A hinge pin secured by a set screw or other equivalent means and affords less security than the Maximum Security Pin.This modification is intended as a deterrent only.

2.11 Olive Knuckle Hinge A pivot hinge with a joint shaped like an olive.

2.12Pivot HingeA hinge with a fixed pinand a single joint having a height less than the adjacent hing leaves.

2.13Raised Barrel A full mortise hinge having an offset barrel.

2.14Reverse Safety Stud A projecting memberon the back of each full mortise leaf that engagesa hole in the door and jamb hinge reinforcing plates.

2.15 Safety Stud A projecting member on one surface ofa fullmortise hinge leaf that engages a hole in the opposite leaf when the door is closed.

BHMAA156.1 -2006 Hinge

2.16Slip-In HingeA hinge where oneor both leaves slide intoacavity prepared ina dooror door frame thusconcealing one or both hinge leaves.

2.17 Swaging Offseting a hinge leaf at the barrel so the surface of the leaf is not tangent to the outer diameterof the barrel.

2.18 Swing Clear Hinge A hinge that swings a door completely clear of the opening when the door is opened 90 to 95degrees.

3. GENERAL

3.1Bearing SurfacesAnti-friction bearings shall beused in Grades 1and2 for standard and heavy weight hinges.

3.2Fastenings All products shallbe complete with screws,bolts,or other fastenings,as required and of size necessary for application and shall be compatible with the product as to finish and material.

3.3Swaging The clearance between the leaves of full mortise hinges when closed to the parallel position shall be 1 / 1 6 ± 1 / 6 4 in ( 1 . 6 ± 0 . 4 {mm } ) unless specifically noted otherwise.

3.4Stainless Steel PinsAllstandardand heavy weight non-ferrous type hinges of Grades 1,2,and 3 shall be equipped with stainless steel pins.Protruding heads of any material of stainless steel pins shall match finish of hinge.

3.5Non-rising Loose Pins Pins shallbe removable without damaging exposed surfaces of the hinge or tip and shall be retained bymeans thatofer effectiveresistance to movementof thepin from itsseat,but allows the pin to be removed by moderate force.

3.6Options Hinges listed are permited to be equipped with the following options (consult individual manufacturerscatalogs):

3.7Templates Hinges made to template shallhave dimensions,screw hole locations and tolerances in accordance with ANSI/BHMA Standard A156.7-2003 for Template Hinge Dimensions.

6. TESTSFORHINGES

6.1Cycle Test Using the test fixture described in 5.9and mounted inaccordance with 5.3and 5.4,cycle the hinges for the number required below.Atthe conclusion of the cycle test,the hinges shallmeet the Hinge PinRise,Vertical Wear,andLateralWear Tests.

These numbers of cycles pertain to the specific conditions and degrees of wear outlined in this test procedure,and are not recommendations to guide selection of hinges for actual installation.

6.2HingePinRise Test (does not apply to Maximum Security Pin hinges）Hinge pins shall not rise duringthe cycle test to the point of touching the safety barrier described in 5.6ora maximumspecified below.

6.3HingePlay Test Prior to thecycle test,lateral andvertical displacement shallnot exceed the values given below when measured in accordance with 5.10 and 5.11.

6.4Vertical and Lateral Wear TestAtthe conclusionofthe cycle test,vertical and lateral wearshall not exceed the values given belowwhenmeasured inaccordance with5.10.

6.5Overload Test At the conclusion of the cycle test,lateral displacement shall not exceed the values given below when measured in accordance with 5.11.

STANLEY

BS EN 1935 Hinge

·ABHMBESTPRACTICEGUIDES

Thispublication isone inaseriesof guides addressing the major issues that should be consideredwhenspecifying,orderingorusing the productsitdescribes.Itaimsto provide thereader with a concise document which includes a summary of relevant sections from the new European product standard.Thereaderwill thenbe ina positiontoseek further specialistadvice where necessary and recognise GENUiNEconformitytothenewstandards.

BS EN 1935 Single-axis hinges

This standard provides details on product types, classification by use,test cycles,door mass,corrosion resistance,as well as definitions,product performance requirements,testapparatus,testmethodsand marking of products.In addition,the published standard includes annexes with details for special applications.

Extracts from BS EN1935are reproduced with the permission of the British Standards Institution under licence number 2003/SK0014. BSl publications can be obtainedfromBSlCustomerServices,389Chiswick High Road,London W4 4ALTel + 4 4 (0)20 8996 9001 Email: cservices@bsi-global.com.

Note: This standard has replaced BS 7352:1990: Specification for strength and durability performance of metal hinges for side hanging applications and dimensional requirements for template drilled hinges.

·SCOPE

ThisEuropeanstandardspecifiesrequirementsfor single-axis hinges for windowsand doors opening in one direction only, whose rotation axis is no more than 3 0mm from the face of the sash or door.Itcovers both fixed pin and lift-off hinges,and contains additional requirements for hinges intended for use on fire doors.

·CLASSIFICATION

BS EN 1935 classfies door furniture by using an 8 digit coding system.A similar classification applies to all building hardware product standardsso that complementary items of hardware can be specified to, for instance,a common level of corrosion resistance, category of use,etc.Each digit refers toa particular feature of the product measured against the standard's performance requirements.

The ABHM recommends the use of graphic icons to enhance clarity of information and has devised a system to facilitate assimilation of the various product classifications. Each feature within the product classification is represented by an icon comprising four elements; Symbol, Grade/Type,Range/Optionsand Box

Box Symbol 目 Grade/Type 2 Range/Options (1-4)

The icon above is for a product which meets Grade 2 in the Category of Use classification,where EN 1935 stipulates a range of four possible grades from1 to 4.

Full details on the ABHM graphic icons system can be found on this CD_or at www.abhm.org.uk

Digit 1 Category of use Four categories of use are identified:

- grade 1: light duty - grade 2: medium duty - grade 3: heavy duty - grade 4: severe duty

Digit 2 Durability

Three gradesare identified for single-axis hinges manufacturedtothis Europeanstandard:

- grade 3:10 ooo test cycles,for light duty hinges on windows only
- grade 4:25 oo0 test cycles,for light duty hinges on windows and doors
- grade 7: 20o ooo test cycles,for medium. heavy and severe duty hinges on doors only

Digit 3

Test door mass

Eight door mass grades related to single-axis hinges are identified in this European standard as shown in Table 1 below.

Digit 4

Suitability for fire/smoke door use

Two grades of suitability are identified for single-axis hinges:

- grade O: not suitable for fire/smoke resistant door
assemblies
- grade 1: suitable for fire/smoke resistant door
assemblies subject to satisfactory assessment of the contribution of the single-axis hinge to the fire resistance ofthespecifiedfire/smokedoorassemblies.Such
assessment is beyond the scope of this European
standard (see EN 1634-1).

Digit5 Safety

Single-axis hingesare required to satisfy the essential requirementsof safety in use.Therefore,only grade1 is identified.

BS EN 1935 Hinge

Digit 6 Corrosion resistance

Five grades of corrosion resistance are identified in accordance with EN 1670:

- grade O: no defined corrosion resistance.
- grade 1: mild resistance.
- grade 2: moderate resistance.
- grade 3: high resistance.
- grade 4:very high resistance.

Digit 7 Security

Two grades of securityare identified for single-axis hinges:

- grade O: not suitable for use on burglar-resistant door assemblies - grade 1: suitable for applications requiring a degree of security.Annex C of this European standard details the hinge grade to use for the level of security required.

Digit 8

Hinge grade

Fourteen gradesare identified in this European standardandare detailed inTable2below.The full classification is shown in the standard.

·EXAMPLE

Example:the following marking denotes a single-axis hinge for use in medium duty situations, tested to 200 000 cycles,for use on doors with a mass up to 6 0 \kg , （204号 withstated fire door suitability,satisfying the essential requirement of safety in use, high corrosion resistance, suitable for burglar-resistant doorsand with a hinge grading of 10.

目 园 海 p 器 2 7 3 1 1 4 1 10 (1-4) (3/4/7) (1-8) (0/1) (1) (0-4) (0/1) (1-14)

·MARKING

Each single-axis hinge manufactured to this European standard must be marked with the following: (a) manufacturer's name or trademark,or other means of identification. (b)the hinge grade (eighth digit of classification code). (d) number of this European standard.

Note:This informationcan be in coded form

CEMARKING

Singleaxishinges intendedfor useon fire resisting doorsand smokecontrol doorsarecoveredbya Construction ProductsDirectivemandate issued by the European Commission.Consequently, this standardisregardedasa“harmonised"standardand compliance with it,supported by suitable evidence, allowstheapplicationoftheCEmark.

Asfire/smoke door hinges haveacritical safety function,applicationof the CEmarkwill require the involvementofanotifiedcertificationbodytoprovide verificationofthecomplianceclaims.Thiswill involve initialtype-testingoftheproducttoEN935,initial inspectionofthemanufacturer'sfactoryproduction control andcontinuing surveillanceandapprovalof the factory production control. On satisfactory completionof these tasks,thenotified body issuesan EC Certificate of Conformity which then permits the manufacturertodeclarecomplianceandaffixtheCE marking to his product.

Thestandard requiresthefollowingadditional
informationtoaccompanytheCEmarking:-
·theidentificationnumberof thenotifiedcertification
body
·thename or identifying markof the manufacturer
·theregisteredaddressof themanufacturer
·the last two digits of the year in which the marking
wasapplied
·the number of the EC certificate of conformity
·reference to EN1935:2002
·the classification code of the product

Notethat,althoughthenotifiedbodyhastobe involvedtoverifythemanufacturer'sclaims,the manufacturerremainsresponsible fordesigningand producing the product,foraffixing the CEmarking, andfor ensuring that the productmeetsthe requirementsof the Directive.

STANLEY

Features

·5 knuckle 2 ball bearing butt hinges
·Size: Height"× Width"× Thickness mm
·Template Drilled as Standard
·Stainless Steel SS 304 Grade Leaf/Pin/Ba bearing
·Constructed to EN1935,Grade14,GB12955-2008
90 minutes fire rated
·Max Door weight 160kgs based on 3 hinges/leaf
·Application:Wood/Hollow Metal doors

Size:Height"×Width"×Thickness mm

ConfigurationOptions

·Pair of Hinges ·Screw kit (Wood or Metal)

\*Specify "M"afterPart#forMetalScrewrequirement Specify "W"after Part# for Wood Screwrequirement \* Consult Stanley Technical Services for Finish & SS Grade options

Features

·5 knuckle 2 ball bearing butt hinges
·Size:Height"× Width"× Thickness mm
·Template Drilled as Standard
·Stainless Steel SS 304 Grade Leaf/Pin/Ballbearing
·Constructed to EN1935,Grade13,GB12955-2008 90 minutes fire rated
·Max Door weight 120kgs based on 3 hinges/leaf
·Application:Wood/Hollow Metal doors

Size:Height"xWidth"xThicknessmm

Configuration Options

·Pair of Hinges ·Screw kit (Wood or Metal)

\*Specify "M"afterPart#forMetalScrewrequirement Specify "W"after Part# for Wood Screwrequirement \* Consult Stanley Technical Services for Finish & SS Grade options

STANLEY

Features

·5 knuckle 2 ball bearing butt hinges
·Size:Height"×Width"× Thickness mm
·Template Drilled as Standard
·Stainless Steel SS 304 Grade Leaf/Pin/Ball Bearing
·Tested to ANSl A156.1 Grade2
·GB12955-2008 90 minutes fire rated
·Max door weight up to 160kgs based on 3 hinges/leaf
·Application:Wood/Hollow Metal doors

Size:Height"×Width"×Thicknessmm

·SatinStainlessSteel

ConfigurationOptions

·Pair of Hinges ·Screw kit (Wood or Metal)

\*Specify "M"afterPart#forMetalScrewrequirement Specify "W"afterPart#forWoodScrewrequirement \* Consult Stanley Technical Services for Finish & SS Grade options

Features

·5 knuckle 4 ball bearing butt hinges
·Size:Height"× Width"× Thickness mm
·Template Drilled as Standard
·Stainless Steel SS 304 Grade Leaf/Pin/Ball Bearing
·Tested to ANSl A156.1 Grade 1
·GB12955-2008 90minutes fire rated
·Max door weight up to 160kgs based on 3 hinges/leaf
·Application:Wood/Hollow Metal doors

Size:Height"xWidth"xThicknessmm

Configuration Options

·Pair of Hinges ·Screw kit (Wood or Metal)

\*Specify "M"afterPart#forMetalScrewrequirement Specify "W"afterPart#forWoodScrewrequirement \* Consult Stanley Technical Services for Finish & SS Grade options

STANLEY

Features

·Electric hinges conduct current regardless of door positiontoelectric locks,exitdevices,orhold open devices where tamper-proof hinge is required. ·Transmit signals from code readers on doors to remote computers foraccess control ·No electrical parts are exposed when hinge is installed ·Material: 304 Stainless steel ·Current&Voltage:1A,12VDC/24VDC ·Wires:4 wires Standard，6，8，10 wires available

WarrantyInformation

1 Years Warranty

Features

·Material:Zinc Alloy&StainlessSteel
·Loading Capacity:50-85 kgs based on 3 hinges/leaf ·Durability \because 100,000 cycles
· Suitable for Wood& Metal doors.
·Concealed Installation
·Max. opening angle 1 8 0 ^ { \circ }
·Corrosion Resistance -Pass 48 hours'Salt spray test.

\*Consult Stanley Technical Services for Finish & SS Grade options

STANLEY

Features

·Forwooden doors,steel and casing frame doors
·Concealed installation
·Easy to install and adjust
·With 3D adjustable: vertical ±2mm, horizontal ±3mm
depth ±1mm
·Opening angle:180°
·Material: Zinc Alloy
·Max.door weight by 2 hinges 60Kg or 80kg

SGAJL60SC

ConfigurationOptions

\*Consult StanleyTechnical Services for Finish&SS Grade options

SGAJL80SC

Features

·Forwooden doors,steel and casing frame doors
·Concealed installation
·Easy to install and adjust
·With 3D adjustable:vertical ±3mm, horizontal ±3mm depth ±2 mm
·Opening angle: 1 8 0 ^ { \circ }
·Material: Solid stainless steel
·Max.door weight by2 hinges 120Kg or 2 0 0 \mathsf {kg }

SGAJL120SS

ConfigurationOptions

·Pair of Hinges

·Screw kit (Wood or Metal)

\* Consult Stanley Technical Services for Finish & SS Grade options

SGAJL200SS

STANLEY

Features

·Testedto ANSI A156.4 Grade1 GB12955-2008,90 mins fire rated
·Material: cast stainless steel (sus 304)
·Maximum Load 880 pounds (400kg)
·Door Thickness minimum 1-3/4"(44mm)
·Opening angle 1 8 0 ^ { \circ }
·Handed
·Optional Intermediate Pivot (handed) caries up to an additional 100 pounds ( 4 5 . 5 \mathsf {kg } ) loadorneeded for doors over7'

ConfigurationOptions

·Screwkit(WoodorMetal)

\*Consult StanleyTechnical Services forFinish&SS Grade options

Heavy Duty Offset Pivot set

ConfigurationOptions

·Screwkit(WoodorMetal)

\* Consult Stanley Technical Services for Finish & SS Grade options

STANLEY

Shanghai Eastern Iron Hardware Co., Ltd.

TESTREPORT

Intertek Testing Servioes Shenzhen Lt. Guangzhou Branch Room4103 & 4203, No.63,PnnRoad,Hungpustriet,Guanghou,Ch:na. Tel: +8620-82139688, Fax: 020-32157538 Website: www.intertek.com Test Report Report Number:200410152G2U-001 Report Date:2020-11-11 Applicant: Shanghai Easternron Hardware Co., Ltd. Applicant Address: 288,Jlyedict Sample Information Product: Floor Spring Trade Mark: GMT Modeland/ortypereference: NH-2524 Manufacturer: Shanghai Eastern Iron Hardware Co.. Ltd. Manufacturer Address: 288,Jiye Rd, Songjiang District, Shanghai, China Sample ID: 5200410152 -001\~005 Date of receipt of test item: 2020-03-30 &2020-07-31 Situation of receipt samples: Received in good condition Date (s) of performance of tests: 2020-04-10\~2020-11-05 Testing informatton Standard: EN 1154:1996/A1:2002/AC:2006 Rating(s): 382/012 Testing Laboratory name: Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Address: Room4103&423,No.63,unanRoad,Hagpistict Guangzhou, China. Possible Test Case Verdicts Test Casedoes not apply to the Test object： N/A 技不事务有限公 Test object does meet the requirement: P(Pass) LEETSS ★ R Test object does not meet the requirement: F (Fail) 检专用章 Conciusion: TeubmitedsamplesOLEDWallaicalemechnicaleformanceefE 1154:1996/A1:20o2/AC:2006 for the ratings.Items5.2.9 andS.2.11 were compliant afterretest with second time received samples.

Thisreportisforthe exclusive use ofntertek'sClentandisprovded pursuant tothe agreementbetweenltertek andits llent Itertek'sresponsibltyandlbilitaeimiedtetersdcondonsofteageemntInertessusnitt anypartytrntelticdeieageenosegeodeeof thisrepart.OnlytheClentisuthorizedtopermltcopyngordistrbuionoftisrepartandthenonyinitsentiretyAnyuseof thetnterteknameoroneofltsmarksforthesate radvertisementofthetestedmaterial,productorservicenustfirstbe approvedin writingbyInertek.Theobservationsandtestresutsinthsreport arerelevant onlytothesampe tested.Thls reportbyitselfdesotmtattematerial,roducteiceisoseveeendeantertekcerifianoa AllthetestsresultsiveestateentofonityreertothedecisinueofProcedre2AccurayMethodasstatedin the IEC Gulde 11S:2007.

CERTIFICATEOFCONSTANCY OFPERFORMANCE

0905-CPR-000729-01

In compliance with Regulation (EU) No 305/2011of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR),thiscertificate applies to the construction product(s)

Product(s):

Building hardware-Controlled door closing devices-Requirementsand test methods (refer to attached appendix for details and conditions)

Placed on the market under the name or trade mark of:

Shanghai Eastern Iron Hardware Co., Ltd. 288, Jiye Rd, Songjiang istrict,hanghaiCina

and produced in the manufacturing plant(s):

Shanghai Eastern Iron Hardware Co., Ltd. 288, Jiye Rd, Songjiang istrict, Shanghai, Cina

Intended use:

Onfireandsmokecompartmentationdoors (tofulfil theself-closing requirements of such doors)

This certificate attests that allprovisions concerning the assessment and verification of constancy of performance described in Annex ZA of the standard(s):

EN1154:1996/A1:2002/AC:2006

Under System 1 for the performances set out in this certificate are applied and that the performance of the construction product fulfilsall the prescribed requirements for these performances.

This certificate replaces 0359-CPR-000729-02 first issued on 2019-07-26 andwillremainvalidaslongasthetestmethodsand/orfactory production control requirements included in the harmonised standard, usedtoassesstheperformancesofthe declared essentialcharacteristics, donotchangeandtheconstructionproduct,andthemanfactuing conditions in the plant are not modified significantly, unless suspended or withdrawn by the product certification body.

CE 0905

Theissued document andstotement(s) hereinmakesreferenceonlytoa presumption of conformityinaccordancewith the CPR RegulationsEU 305/2011 (asamended).However,itisthe manufacturer'sor their authorisedrepresentative'ssoleresponsibilitytoaffxtheCElogoand,by doingso, confirmsfull complianceandconformity toall other European mandatorydirectivesandregulations thatmayalsoapply.

Signature:

Date: 2019-09-10 intertek Issue: 01 Deutschiand Dipl.-Ing. Roland Heine Position: Certification Manager

Name:

CERTIFICATEOF CONSTANCY OFPERFORMANCE

0905-CPR-000729-01

APPENDIXTO:Certificate of Constancy of Performance

Brand: GMT Model Ref: N-120E, N-150E, S-300E

Notes.

a.Digit 4 grade “1" was based on the test result from fire resistance test (refer to Table A3). b.Thedoorclosershallbe installed inaccordance withthe installation instructionsfortheproducts

STANLEY

Features

Dimensions&Specifications

·Door Width (mm):800-950. ·Max.Door Weight (kg):100. ·Dimension (mm):255X93X49

Applications

·Center hung,double acting
·With 9 0 ^ { \circ } hold open,max.door opening angle 1 1 6 ^ { \circ } # ·SuitableforFramelessGlass/Wood/Steel& Framed Aluminium Doors.
·Vertical & Harizantal adjustment :Optional.
·Adjustable closing & latching speeds.

TechnicalData

·Closed at 0 ^ { \circ }
·With 9 0 ^ { \circ } holdopen.
·Buffer Zone 9 0 ^ { \circ } -110°
·Free standing range 1 1 0 ^ { \circ } - 1 1 6 ^ { \circ }
·2 speed adjustment valves
Closing speed adjustment valve 9 0 ^ { \circ } - 2 0 ^ { \circ } Latching speed adjustment valve 2 0 ^ { \circ } - 0 ^ { \circ } ·Suitable for LH& RH doors.
·CoverPlatescrewedto cementbox.

ConstructionDetails

Cast iron body.
Galvanized Cement Box.
Accessories:
AluminiumForged Steel:Top&bottomstrap

StandardConfigurations

Closer unit
Top Strap
Bottom Strap
SS cover Plate
AllenKey&Screw Kit

Standard&OptionalFunctions

Function
(1) Closed at 0°
(2)Holding at 9 0 ^ { \circ }
(3) 0 ^ { \circ } ~ 9 0 ^ { \circ } backtoO°automatically
(4) Buffer Zone:90°\~116°
(5)2 section speed adjustment valve: closing speed adjustment valve 9 0 ^ { \circ } ~ 2 0 ^ { \circ } latching speed adjustment valve 2 0 ^ { \circ } { ~ } 0 ^ { \circ }

FinishOptions

SatinStainless Steel

Accessories: ·Double action accessories ·Left Single Action accessories ·Right Single Action accessories

WarrantyInformation

2 Years Warranty

Finishes: ·stainless steel

Remark

Installationinstructions

OTimber or metal doors Installation

2Frameless Glass Door Installation

Correct Installation

Correct Installation

Wrong Installation

Precautionsforinstallation

Wrong Installation

1.Use the right door botom strap.Avoid modifying the spindle.(Figure 1)
2.DO NOT use rivet to secure door bottom strap to door panel.(Figure 1)
3.DO NOT remove dustproof cover strown in Figure 2.
4.Fasten the Horizontal/Lateral screwsafter you haveadjusted the floor
hinge to the correct position.(Figure 3)
5. Speed adjustment valve.(Figure 3) ·Turn valve clockwise:reduce speed ·Turn valve anti clockwise:increase speed

STANLEY

Features

Dimensions&Specifications

·Door Width (mm):900-1100. ·Max.Door Weight (kg): 120. ·Dimension (mm):298X93X49

Applications

·Center hung,double acting
·With 9 0 ^ { \circ } hold open,max.door opening angle 1 8 0 ^ { \circ } # ·SuitableforFramelessGlass/Wood/Steel& Framed Aluminium Doors.
·Vertical & Harizantal adjustment :Optional.
·Adjustable closing & latching speeds.

TechnicalData

·Closed at 0 ^ { \circ }
·With 9 0 ^ { \circ } holdopen.
·Buffer Zone 9 0 ^ { \circ } -110°
·Free standing range 1 1 0 ^ { \circ } - 1 8 0 ^ { \circ } #
·2 speed adjustment valves
Closing speed adjustment valve 9 0 ^ { \circ } - 2 0 ^ { \circ } Latching speed adjustment valve 2 0 ^ { \circ } - 0 ^ { \circ } ·Suitable for LH& RH doors.
·CoverPlatescrewedto cementbox.

ST-120E-XC

ConstructionDetails

Cast iron body.
Galvanized Cement Box.
Accessories:
Aluminium Forged Steel: Top & bottom strap

StandardConfigurations

Closer unit
Top Strap
Bottom Strap
SS cover Plate
Allen Key& Screw Kit

Standard&Optional Functions

FinishOptions

SatinStainless Steel

WarrantyInformation

2 Years Warranty

Function
(1) Closed at 0°
(2) Holding at 90°
(3) 0 ^ { \circ } ~ 9 0 ^ { \circ } backtoOautomatically
(4) Buffer Zone:90°\~116°
(5) Free Standing Angle Range:110°\~180°
(6)2 section speed adjustment valve: closing speed adjustment valve 9 0 ^ { \circ } ~ 2 0 ^ { \circ } latching speed adjustment valve 2 0 ^ { \circ } { ~ } 0 ^ { \circ } （204号

Installationinstructions

OTimber or metal doors Installation

2Frameless Glass Door Installation

Correct Installation

Correct Installation <br>Wrong Installation

Wrong Installation

Precautionsforinstallation

1. Use the right door bottom strap.Avoid modifying the spindle.(Figure 1)

2.DO NOT use rivet to secure door bottom strap to door panel. (Figure 1)

3.DO NOT remove dustproof cover strown in Figure 2.

4.Fasten the Horizontal/Lateral screwsafter you have adjusted the floor hinge to the correct position.(Figure 3)

5.Speed adjustment valve.(Figure 3) ·Turn valve clockwise:reduce speed ·Turn valve anti clockwise:increase speed

STANLEY

Features

Dimensions&Specifications

·Door Width (mm):1000-1200. ·Max.Door Weight (kg):150. ·Dimension (mm):310X124X58

Applications

·Center hung,double acting
·With 9 0 ^ { \circ } hold open,max.door openingangle 1 1 6 ^ { \circ } ·Suitable for Frameless Glass Wood /Steel& Framed Aluminium Doors.
·Vertical & Harizantal adjustment :Optional.
·Adjustable closing & latching speeds.

TechnicalData

·Closed at 0 ^ { \circ } #
·With 9 0 ^ { \circ } holdopen.
·Buffer Zone 9 0 ^ { \circ } -110°
·Free standing range 1 1 0 ^ { \circ } - 1 1 6 ^ { \circ }
·2 speed adjustment valves
Closing speed adjustment valve 9 0 ^ { \circ } - 2 0 ^ { \circ } Latching speed adjustment valve 2 0 ^ { \circ } - 0 ^ { \circ } ·Suitable for LH& RH doors.
·CoverPlatescrewedto cement box.

ConstructionDetails

Cast iron body.
Galvanized Cement Box.
Accessories:
AluminiumForged Steel:Top&bottomstrap

StandardConfigurations

Closer unit
Top Strap
Bottom Strap
SS cover Plate
Allen Key& Screw Kit

Standard&Optional Functions

Function
(1) Closed at 0°
(2)Holding at 9 0 ^ { \circ }
(3) 0 ^ { \circ } ~ 9 0 ^ { \circ } backtoO°automatically
(4) Buffer Zone:90°\~116°
(5)2 section speed adjustment valve: closing speed adjustment valve 9 0 ^ { \circ } ~ 2 0 ^ { \circ } latching speed adjustment valve 2 0 ^ { \circ } { ~ } 0 ^ { \circ }

FinishOptions

SatinStainless Steel

Accessories: ·Double action accessories ·Left Single Action accessories ·Right Single Action accessories

WarrantyInformation

2 Years Warranty

Finishes: ·stainless steel

Top pivot (Top jamb side)

Figure3

Attention: 1.DO NOT screw out the adjustment valves. 2.Floor hinge warranty considered void if stanley sticker on floor hinge is damaged or missing.

Arm (Door side)

Remark

Installationinstructions

OTimber or metal doors Installation

2Frameless Glass Door Installation

Correct Installation

Correct Installation

Wrong Installation

Wrong Installation

Precautionsforinstallation

1.Use the right door bottom strap.Avoid modifying the spindle.((Figure 1)
2.DO NOT use rivet to secure door bottom strap to door panel.(Figure 1)
3.DO NOT remove dustproof cover strown in Figure 2.
4.Fasten the Horizontal/Lateral screwsafter you haveadjusted the floor
hinge to the correct position.(Figure 3)
5. Speed adjustment valve.(Figure 3) ·Turn valve clockwise:reduce speed ·Turn valve anti clockwise:increase speed

STANLEY

Features

Dimensions&Specifications

·Door Width (mm):1100-1350. ·Max.Door Weight (kg):200. ·Dimension (mm):310X124X58

Applications

·Center hung,double acting
·With 9 0 ^ { \circ } hold open,max.door openingangle 1 1 6 ^ { \circ } ·Suitable for Frameless Glass Wood /Steel& Framed Aluminium Doors.
·Vertical & Harizantal adjustment:Optional.
·Adjustable closing & latching speeds.

TechnicalData

·Closed at 0 ^ { \circ } #
·With 9 0 ^ { \circ } holdopen
·Buffer Zone 9 0 ^ { \circ } -110°
·Free standing range 1 1 0 ^ { \circ } - 1 1 6 ^ { \circ }
·2 speed adjustment valves
Closing speed adjustment valve 9 0 ^ { \circ } - 2 0 ^ { \circ } Latching speed adjustment valve 2 0 ^ { \circ } - 0 ^ { \circ } ·Suitable for LH& RH doors.
·CoverPlatescrewedto cementbox.

ConstructionDetails

Cast iron body.
Galvanized Cement Box.
Accessories:
AluminiumForged Steel:Top&bottomstrap

StandardConfigurations

Closer unit
Top Strap
Bottom Strap
SS cover Plate
Allen Key & Screw Kit

Standard&OptionalFunctions

Function
(1) Closed at 0°
(2)Holding at 9 0 ^ { \circ }
(3) 0 ^ { \circ } ~ 9 0 ^ { \circ } backtoO°automatically
(4) Buffer Zone:90°\~116°
(5)2 section speed adjustment valve: closing speed adjustment valve 9 0 ^ { \circ } ~ 2 0 ^ { \circ } latching speed adjustment valve 2 0 ^ { \circ } { ~ } 0 ^ { \circ }

FinishOptions

SatinStainless Steel

Accessories: ·Doubleaction accessories ·Left Single Action accessories ·Right Single Action accessories

WarrantyInformation

2 Years Warranty

Finishes: ·stainless steel

Remark

Installationinstructions

OTimber or metal doors Installation

2Frameless Glass Door Installation

Correct Installation

Correct Installation

Wrong Installation

Wrong Installation

Precautionsforinstallation

1.Use the right door botom strap.Avoid modifying the spindle.(Figure 1)
2.DO NOT use rivet to secure door bottom strap to door panel.(Figure 1)
3.DO NOT remove dustproof cover strown in Figure 2.
4.Fasten the Horizontal/Lateral screwsafter you haveadjusted the floor
hinge to the correct position.(Figure 3)
5. Speed adjustment valve.(Figure 3) ·Turn valve clockwise:reduce speed ·Turn valve anti clockwise:increase speed

STANLEY

Features

Dimensions&Specifications

·Door Width (mm): 1200-1400. ·Max.Ooor Weight (kg):350. ·Dimension of pump (mm):341X78X60

Applications

·Center hung,double acting
·With 9 0 ^ { \circ } hold open,max.door openingangle 1 8 0 ^ { \circ } # ·Suitable forFrameless Glass /Wood/Steel& Framed Aluminium Doors.
·Height & Lateral adjustment :Optional.
·Adjustable closing& latching speeds.
·Check for external applicatian involving closing against heavy wind loads.

TechnicalData

·Closed at 0 ^ { \circ }
·With 9 0 ^ { \circ } hold open.
^ { * 2 } speedadjustment valves
·Suitable for LH& RH doors.
·Cover Plate screwed to cement box.

ConstructionDetails

Cast iron body.
Galvanized Cement Box.
Accessories:
Aluminium Forged Steel: Top & bottom strap

StandardConfigurations

Floor Pump with Cement box
Top Strap
Bottom Strap
SS cover Plate
Allen Key& Screw Kit

Standard&OptionalFunctions

Top pivot (Top jamb side)

182 172752.5 21.5 20 321 申 37 1025 123 171

Top pivot (Door side)

Attention: 1.DONOTscrewouttheadjustment valves. 2.Floor hingewarrantyconsideredvoidif stanley sticker on floor hinge isdamagedormissing.

Arm (Door side)

Installationinstructions

Precautionsforinstallation

1. Use the right door bottom strap.Avoid modifying the spindle.((Figure 1)

2.DO NOT use rivet to secure door bottom strap to door panel. (Figure 1)

3.DO NOT remove dustproof cover strown in Figure 2.

4.Fasten the Horizontal/Lateral screwsafter you haveadjusted the floor hinge to the correct position.(Figure 3)

5. Speed adjustment valve.(Figure 3) ·Turn valve clockwise:reduce speed ·Turn valve anti clockwise:increase speed

Features

·For Frameless glass doors ·Glass Thickness:10-12mm ·Patch Lockwith double cylinder

WarrantyInformation

2 Years Warranty

STANLEY

Features

·For Frameless glass doors ·Glass Thickness:15mm ·Patch Lock with double cylinder

Features

·For Frameless glass doors ·Glass Thickness:19mm ·Patch Lock with double cylinder

WarrantyInformation

2 Years Warranty

STANLEY

STANLEY

Features

·Material:Zn、POM、SUS304
·Function:With two Soft Close for both sides Door heightadjustable
·Door Weight: 50-80kg
·Door Width:≥560mm
·Door Thickness:≥30mm
·Executive standard:QB/T4597-2013 BSEN1527-2013
·For door material:Wood& Steel Doors or Slim Aluminium Frame Doors
·Track Length:2M,3M,4M,6M

SGKPC80