该页无缩略图
无卤非阻燃(环保)型热收缩套管
Non-Halogen Non Flame-Retardant (Environment-Friendly) Heat Shrinkable Tubing 珪
{ \scriptsize { 1 } } 特性：非阻燃性热收缩套管具有优良的环保性能、绝缘性、非常柔软有弹性，收缩温度低、收缩快等 特性。广泛应用于电线的连接、电线端部处理、焊点保护、线束标识、电阻电容的绝缘保护、金属棒 或管材的防腐蚀保护、天线的保护等。
⊚ 热收缩原理：在高能射线作用下，线性高分子材料形成在维网状交联结构。交联后的高分子材料在机 械强度、耐温、耐化学溶剂、耐老化等方面获得极大改善，特别是耐酸、碱性能得到很大提高。
{ \scriptsize { 1 } } 安全标准：FT2，RoHS
{ \scriptsize { 1 } } 颜色：黑色、红色、蓝色、白色、黄色、绿色、透明、棕色、灰色、黄绿色，有特殊颜色欢迎定做。
{ \scriptsize { 1 } } 收缩比率：2:1
⊚ 额定电压：600V
③Feature:Non-flame-retardant heat shrinkable tubing features excelent environmental performance, insulation,highflexibilityandelasticitylowshrinkagetemperature,andfastshrinkage.Theyarewidelyused inwireconnection,wireendprocessing,solderjointprotection,wire harnessmarking,insulationprotection of resistorsand capacitors,anti-corrosion protection of metal rods or pipes,antenna protection,etc.
Principleof heatshrinkage:under the high energy radiation,the linear polymercan form network cros-linked structure.The mechanical strength,temperature,chemical solutionand ageing resistanceof cross-linked polymerare greatly improved,especially theacidand alkali resistance.
⊚ Safety standard: FT2,RoHS
{ \scriptsize { 1 } } Color: Black,red,blue,white,yellow,green,transparent,brown,grey,yellow&green,andothercolors areavailableasrequested
⑨ Shrinking ratio: 2:1
⊚ Ratedvoltage:600V
| 规格 Specification | 收缩前尺寸（mm) Dimension beforeshrinking | 收缩后尺寸（mm) Dimensionaftershrinking | 标准包装（米/盘) packaging (m/disc) | 适用范围 Application (mm) | ||
| 内径 Internal | 壁厚 Wall thickness | 内径 Internal diameter | 壁厚 Wall | |||
| 00.8 | diameter 0.9±0.2 | 0.20±0.05 | 0.40±0.1 | thickness 0.32±0.05 | 2007 | .com 0.6-0.8 |
| 01.0 | 1.2±0.3 | 0.20±0.05 | 0.48±0.1 | 0.32±0.05 | 200 | 0.75~0.9 |
| 1.5 | 1.7±0.3 | 0.20±0.05 | 0.73±0.1 | 0.32±0.05 | 200 | 0.95~1.4 |
| 02.0 | 2.2±0.3 | 0.25±0.05 | 0.98±0.1 | 0.32±0.05 | 200 | 1.1~1.8 |
| 02.5 | 2.6±0.3 | 0.25±0.05 | 1.23±0.2 | 0.35±0.05 | 200 | 1.35~2.3 |
| 03.0 | 3.2±0.4 | 0.25±0.05 | 1.45±0.2 | 0.35±0.05 | 200 | 1.6~2.7 |
| 3.5 | 3.6±0.4 | 0.25±0.05 | 1.72±0.2 | 0.35±0.05 | 200 | 1.85~3.2 |
| 04.0 | 4.2±0.4 | 0.25±0.05 | 1.96±0.2 | 0.35±0.05 | 200 | 2.1~3.6 |
| 04.5 | 4.6±0.4 | 0.25±0.05 | 2.20±0.2 | 0.35±0.05 | 200 | 2.35~4.0 |
| 05.0 | 5.2±0.4 | 0.25±0.05 | 2.48±0.2 | 0.35±0.05 | 200 | 2.6~4.5 |
| 06.0 | 6.2±0.4 | 0.28±0.15 | 2.96±0.3 | 0.45±0.15 | 200 | 3.1~5.4 |
| 07.0 | 7.2±0.4 | 0.28±0.15 | 3.48±0.3 | 0.45±0.15 | 100 | 3.7-6.5 |
| 08.0 | 8.2±0.5 | 0.28±0.15 | 3.95±0.3 | 0.45±0.15 | 100 | 4.2~7.2 |
| 09.0 | 9.2±0.5 | 0.30±0.15 | 4.40±0.3 | 0.50±0.15 | 100 | 4.7~8.0 |
| 10 | 10.2±0.5 | 0.30±0.15 | 4.90±0.3 | 0.50±0.15 | 100 | 5.2-9.0 |
| 011 | 11.2±0.5 | 0.30±0.15 | 5.40±0.3 | 0.50±0.15 | 100 | 5.7-10 |
| 12 | 12.2±0.5 | 0.30±0.15 | 5.90±0.5 | 0.50±0.15 | 100 | 6.2~11 |
| 013 | 13.2±0.5 | 0.33±0.15 | 6.40±0.5 | 0.50±0.15 | 100 | 6.7~12 |
| 14 | 14.2±0.5 | 0.35±0.15 | 6.90±0.5 | 0.50±0.15 | 100 | 7.3~13 |
| 015 | 15.2±0.6 | 0.38±0.15 | 7.40±0.5 | 0.60±0.15 | 100 | 7.8~14 |
| 016 | 16.2±0.6 | 0.38±0.15 | 7.90±0.5 | 0.60±0.15 | 100 | 8.3~15 |
| 017 | 17.2±0.6 | 0.38±0.15 | 8.40±0.5 | 0.60±0.15 | 100 | 8.8~16 |
| 018 | 18.2±0.6 | 0.40±0.15 | 8.90±0.5 | 0.60±0.15 | 100 | 9.3~17 |
| 020 | 20.2±0.8 | 0.40±0.20 | 9.90±0.5 | 0.70±0.20 | 100 | 11.4~19 |
| 822 | 22.2±0.8 | 0.42±0.20 | 10.80±1.0 | 0.70±0.20 | 100 | 12.4~21 |
| 025 | 25.3±0.8 | 0.45±0.20 | 12.30±1.0 | 0.70±0.20 | 50 | 12.8~24 |
| 028 | 28.3±0.8 | 0.45±0.20 | 13.50±1.0 | 0.70±0.20 | 50 | 14.4~26 |
| 830 | 30.2±0.8 | 0.45±0.20 | 14.70±1.0 | 0.70±0.20 | 50 | 16~29 |
| 035 | 35.2±0.8 | 0.50±0.20 | 17.30±1.0 | 0.80±0.20 | 50 | 18~34 |
| 840 | 40.0±1.0 | 0.50±0.20 | 19.80±1.0 | 0.80±0.20 | 50 | 21-39 |
| 050 | 50.0±1.0 | 0.50±0.20 | 24.80±1.0 | 0.80±0.20 | 50 | 26~49 |
| 060 | 60.0±1.0 | 0.60±0.20 | 29.80±1.0 | 0.80±0.20 | 25 | 35~55 |
| 070 | 70.0±1.0 | 0.65±0.20 | 34.00±2.0 | 1.00±0.20 | 25 | 40~65 |
| 880 | 80.0±1.0 | 0.65±0.20 | 39.00±2.0 | 1.00±0.20 | 25 | 45~75 |
| 90 | 90.0±1.0 | 0.65±0.20 | 44.00±2.0 | 1.00±0.20 | 25 | 50~85 |
| 0100 | 100.0±2.0 | 0.65±0.20 | 49.00±2.0 | 1.00±0.20 | 25 | 55~95 |
| 120 | 120.0±2.0 | 0.70±0.20 | 59.00±2.0 | 1.20±0.20 | 25 | 65~115 |
| 0150 | 150.0±2.0 | 0.70±0.20 | 74.00±2.0 | 1.20±0.20 | 25 | 80~145 |
| 0180 | 180.0±2.0 | 0.70±0.20 | 88.00±2.0 | 1.20±0.20 | 25 | 95~175 |
热缩管包装
1kV/10kV/35kV热收缩母排保护套管
1kV/10kV/35kV Heat Shrinkable Busbar Protective Tubing
{ \scriptsize { 1 } } 热收缩原理：在高能射线作用下，线性高分子材料形成在维网状交联结构交联后的高分子材料在机械强度、耐温、耐化学溶剂、耐老化方面获得极大改善，特别是耐酸、碱性能得到很大提高。⑨ 颜色：黑色、红色、白色、黄色、绿色、蓝色、透明，有特殊颜色欢迎定做。{ \scriptsize { 1 } } 安全标准：UL224VW-1C-ULCSAC22.2OFT
⊚ Heat-shrinkableprinciple:Under theactionof high-energy rays,linearpolymermaterials formathreedimensional network cross-linked structure.Thecross-linked polymer materials have been greatly improved intermsof mechanicalstrength,temperature resistance,chemical solvent resistanceandaging resistance, especiallytheacidandalkaliresistancehasbeensignificantlyenhanced.
⑨ Color: black,red,white,yellow,green,blue,transparent,andothercolorsareavailableasrequested.
⊚ Safetystandards:UL224VW-1C-UL CSAC22.2OFT
| 系统电压 System voltage(kV) | 通常绝缘距离 Ordinaryinsulation distance(mm) | 使用MPG10系列后的绝缘距离Insulationdistanceafter usingPG10series | 使用MPG10系列后的绝缘距离Insulationdistanceafter usingPG10series | ||
| 对地（mm） To the earth | 相间（mm) Between phase | 对地（mm） | 相间（mm) Between phase | ||
| 10 | 120 | 80 | 70 | To the earth 50 | 40 |
| 22 | 220 | 160 | 120 | 105 | 75 |
| 35 | 320 | - | 200 | 150 | |
| 项目 Item | 质量指示 Index | 项目 Item | 质量指示 Index |
| Harde( Shre A) | 拉伸强度(Mpa) Tensile strength | >12 | |
| 密度(kg/m³) Density | 1.15×10³ | 断裂伸长率(%)Crackelongation | >400 |
| Water-adoring ate | 穿强kV/mmth | ≥25 | |
| Full h缩温pearure | 130±5 | 体ume e(o.tm) | >1x1014 |
| Ra向rngratio | >50 | 氧指数Oxygen index | ≥30 |
| 轴向收缩率(%) Axial shrinking ratio | 偏壁率(%) Eccentricity |
| Sspecification | 适用排 | 收缩前尺寸（mm） Dimension bfore shiking | 收缩后尺寸（mm） Dimension 内alter shiking厚 | 标准包装 Standard (m/disc) | |||
| Internal diameter | Wall thickness | Internal diameter | Wall thickness | ||||
| 1kV MPG 30 | 20~30 | 30.2±0.8 | 0.45±0.15 | 14.7±1.0 | 0.9±0.2 | 50 | 16~29 |
| 1kV MPG35 | 30~40 | 35.2±0.8 | 0.50±0.15 | 17.3±1.0 | 1.0±0.2 | 50 | 18~34 |
| 1kV MPG 40 | 40~50 | 40.0±1.0 | 0.50±0.15 | 19.8±1.0 | 1.0±0.2 | 50 | 21~39 |
| 1kVMPG50 | 50-60 | 50.0±1.0 | 0.50±0.15 | 24.8±1.0 | 1.0±0.2 | 50 | 26~49 |
| 1kVMPG 60 | 60~70 | WWw 60.0±1.0om | 0.65±0.15 | 29.8±1.0 | 1.1±0.2 | 25 | 35~55 |
| 1KV MPG704 | 80~90 057 | 270.0±1.0 | 0.65±0.15 | 34.0±2.0 | 1.1±0.2 | 25 | 40~65 |
| 1KV MPG80 | 90~100 | 80.0±1.0 | 0.65±0.20 | 39.0±2.0 | 1.2±0.2 | 25 | 45~75 |
| 1KVMPG90 | 120 | 90.0±1.0 | 0.65±0.20 | 44.0±2.0 | 1.2±0.2 | 25 | 50~88 |
| 1KV MPG 100 | 140 | 100.0±2.0 | 0.65±0.20 | 49.0±2.0 | 1.3±0.2 | 25 | 55~95 |
| 1KVMPG120 | 180 | 120.0±2.0 | 0.80±0.20 | 59.0±2.0 | 1.4±0.2 | 25 | 65~115 |
| 1kV MPG 150 | 240 | 150.0±2.0 | 0.80±0.20 | 74.0±2.0 | 1.4±0.2 | 25 | 80~145 |
| 型号 Item No. | 适用母排宽度 (mm) Applicable busbarwidth | 收缩前尺寸（mm） Dimension before shrinking | 收缩后尺寸（mm） Dimension after shrinking | ||
| 内径 Internaldiameter | 壁厚 Wall thickness | 内径 Internal diameter | 壁厚 Wall thickness | ||
| 10kV MPG15 | 10~15 | 15±1 | 0.8±0.2 | 6 | 1.6±0.2 |
| 10KVMPG20 | 12~18 | 20±1 | 0.8±0.2 | 8 | 1.6±0.2 |
| 10kV MPG25 | 20~30 | 25±1 | 1.0±0.2 | 10 | 2.0±0.2 |
| 10KVMPG30 | 30~40 | 30±1 | 1.0±0.2 | 13 | 2.0±0.2 |
| 10kVMPG40 | 40~50 | 40±1 | 1.0±0.2 | 15 | 2.2±0.2 |
| 10kVMPG50 | 50~60 | 50±2 | 1.2±0.2 | 20 | 2.2±0.2 |
| 10kV MPG60 | 60~70 | 65±2 | 1.2±0.2 | 24 | 2.5±0.2 |
| 10kVMPG80 | 80~100 | 80±3 | 1.2±0.3 | 32 | 2.5±0.2 |
| 10kV MPG100 | 100~120 | 100±4 | 1.2±0.3 | 40 | 2.5±0.2 |
| 10kVMPG120 | 150 | 120±4 | 1.2±0.3 | 48 | 2.7±0.3 |
| 10kV MPG150 | 200 | 150±4 | 1.2±0.3 | 60 | 2.7±0.3 |
| 10KVMPG180 | max | 180±5 | 1.2±0.3 | 70 | 2.7±0.3 |
| 10KV MPG210 | max | 210±5 | 1.2±0.3 □ | 80 WWW | 2.7±0.3 |
0
| 型号 Item No. | 适用母排宽度 (mm) Applicable busbarwidth | 收缩前尺寸（mm) Dimension before shrinking | 收缩后尺寸（mm) Dimensionaftershrinking | ||
| 内径 Internaldiameter | 壁厚 Wall thickness | 内径 Internaldiameter | 壁厚 Wall thickness | ||
| 35kVMPG30 | 30~40 | 30±2 | 2.0±0.3 | 13 | 3.5±0.3 |
| 35kVMPG40 | 40~50 | 40±2 | 2.0±0.3 | 15 | 3.5±0.3 |
| 35kV MPG50 | 50~60 | 50±2 | 2.0±0.3 | 20 | 4.0±0.3 |
| 35KVMPG60 | 60~70 | 65±2 | 2.0±0.3 | 24 | 4.0±0.3 |
| 35kVMPG80 | 80~100 | 80±3 | 2.2±0.3 | 32 | 4.0±0.3 |
| 35kVMPG100 | 100~120 | 100±4 | 2.5±0.3 | 40 | 4.0±0.3 |
| 35kV MPG120 | 150 | 120±4 | 2.5±0.3 | 48 | 4.5±0.3 |
| 35kVMPG150 | 200 | 150±4 | 2.5±0.3 | 60 | 4.5±0.3 |
| 35kVMPG180 | max | 180±5 | 2.5±0.3 | 70 | 4.5±0.3 |
| 35KVMPG210 | max | 210±5 | 2.5±0.3 | 80 | 4.5±0.3 |
双壁热收缩套管
Double-Wall Heat Shrinkable Tubing
特点及应用范围
{ \scriptsize { 1 } } 是一种内层附有热熔胶的绝缘性热缩管。外层是由辐射交联聚烯烃组成，内层是专门设计的胶性内壁；加热时内壁熔胶，并随着外壁收缩充填孔隙或缝隙，冷却后，双壁管壁厚均匀、坚实。广泛应用于电子设备的接线防水漏气，电线分支处密封固定，金属管线的防腐保护、电线电缆的修补等均可，防止由高分子链松弛产生的松动和脱落，如水下灯饰、汽车油管、高级线束等。
Featureand application
It isan insulating heat shrinkable tubing with a hot melt adhesive layer on the inner side.The outer layer iscomposedofradiation-crosslinkedpolyolefin,and theinner layerisaspeciallydesignedadhesive innerwall.When heated,the inner wall adhesive meltsand fills the pores or gapsas the outer wall shrinks.Aftercooling,the double-walled tube hasauniformandsolid wall thickness.It is widely used in waterproofing andair leakage prevention forwiring in electronicequipment,sealingand fixing of wire branches,anti-corrosion protectionof metal pipelines,repair of wiresand cables,etc.Itcan prevent loosening andfalling offcaused byrelaxationof polymer chains,suchas underwater lighting,automobile oil pipes, high-grade wire harnesses, etc.
特点
{ \scriptsize { 1 } } 适用范围： - 4 0 ^ { \circ } C - 5 0 ^ { \circ } C
⊚ 起始收缩温度： 8 0 ^ { \circ } C ：
⊚ 完全收缩温度： 1 2 5 ^ { \circ } C 开
⊚ 内层胶层融化温度： 7 0 ^ { \circ } C { ~ } 8 0 ^ { \circ } C _ { \circ }
⊚ 收缩倍率：3:1。(可按客户要求提供更大倍率收缩，可提供4倍率，5倍率，6倍率的产品){ \scriptsize { 1 } } 密封、防水、应变能力大，使用方便，用烘箱和热风枪加热即可收缩，供货及时，生产能力大。{ \scriptsize { 1 } } 标准颜色：黑色(可按客户要求提供其它颜色)。
Feature
⑨ Application:-40C\~50℃;
⑨ 8 0 ^ { \circ } \mathsf { C } ; 设计.co.com
⑨ 1 2 5 ^ { \circ } C ;
{ \scriptsize { 1 } }
{0} Shrinkage ratio:3:1.(Larger shrinkage ratios can be provided as per customer requirements.Products with4x,5xand6xratiosareavailable.)
⑨ Seal,water-proof,strong flexibilityconvenient use,able to shrink when heated withoven or hotair gun; timely supply and delivery; and large production.
③Color standard: Black (Other colors are upon the clients' needs).
| 规格 Specification | 收缩前尺寸 （mm）内径 Dininsiginterare diameter | 收缩后尺寸（mm) Dimensionafter shrinking | 标准包装 Standard packaging | 适用范围 Application | |||
| 平均总壁厚 Wall thickness | 平均胶层壁厚 Wall thickness | 内径 Internal | |||||
| mm 02.4 | Inch 3/32 | 2.7±0.5 | 0.7±0.15 | 0.30±0.10 | diameter 0.8 | 100(米/盘m/disc) | 0.9-2.2 |
| 03.2 | 1/8 | 3.2±0.5 | 0.9±0.15 | 0.35±0.10 | 1.0 | 100(米/盘m/disc) | 1.2~3.1 |
| 04.8 | 1.0±0.15 | 0.40±0.10 | 1.6 | 100(米/盘m/disc) | |||
| 06.4 | 3/16 | 4.8±0.5 | 1.2±0.15 | 0.45±0.12 | 2.2 | 100(米/盘m/disc) | 1.8~4.6 |
| 07.9 | 1/4 | 6.4±0.5 8.0±0.5 | 1.3±0.15 | 0.50±0.12 | 2.7 | 100(米/盘m/disc) | 2.4~6.4 |
| 09.5 | 5/16 3/8 | 9.6±0.5 | 1.4±0.15 | 0.50±0.12 | 3.2 | 1.22(米/段m/sec) | 2.9~7.7 3.4~9.4 |
| 012.7 | 1/2 | 12.8±0.8 | 1.6±0.20 | 0.50±0.12 | 4.2 | 1.22(米/段m/sec) | |
| 015 | 5/8 | 15.0±0.8 | 1.8±0.20 | 0.55±0.12 | 5.2 | 1.22(米/段m/sec) | 4.4~12.5 5.4~14.8 |
| 19.1 | 3/4 | 19.6±0.8 | 2.0±0.20 | 0.55±0.12 | 6.3 | 1.22(米/段m/sec) | 6.5~18.8 |
| 025.4 | 1 | 25.4±0.8 | 2.1±0.20 | 0.55±0.15 | 8.5 | 1.22(米/段m/sec) | 8.8~25 |
| 030 | 5/4 | 30.5±0.8 | 2.2±0.20 | 0.60±0.15 | 10.2 | 1.22(米/段m/sec) | 10.5~30 |
| 039 | 3/2 | 39.8±0.8 | 2.4±0.20 | 0.60±0.15 | 13.5 | 1.22(米/段m/sec) | 14~9 |
| 050 | 50±0.8 | WW/2.7±0.25.com | 0.70±0.15 | 17.0 | 1.22(米/段m/sec) | 17.5~49 | |
| 064 | 5/2 | ≥64 | 3.0±0.25 | 0.70±0.15 | 21.0 | 1.22(米/段m/sec) | 22~62 |
| 075 | 了 | ≥75 | 3.0±0.30 | 1.00±0.20 | 25.0 | 1.22(米/段m/sec) | 26~72 |
| 090 | 7/2 | ≥90 | 3.0±0.30 | 1.00±0.20 | 30.0 | 1.22(米/段m/sec) | 32~88 |
| 0100 | 4 | ≥100 | 3.0±0.30 | 1.00±0.20 | 34.0 | 1.22(米/段m/sec) | 36~90 |
| 0125 | 5 | ≥125 | 3.0±0.30 | 1.00±0.20 | 42.0 | 1.22(米/段m/sec) | 44~125 |
卑设 M
热缩复合双壁管
Heat Shrinkable Compound Double Wall Tubing
{ \scriptsize { 1 } } 特性：热缩复合双壁管是由热缩绝缘材料和热缩半导材料经过特殊工艺加工而成。内层具有良好的绝缘性能，外层具有半导电性能，外层与内层间结合紧密，屏蔽可靠。
适用范围：用于35KV及以下电力电缆中间连接的绝缘和外屏蔽层，以及其它有绝缘和屏蔽需要的场所 ⑨ Feature:Heat shrinkablecompound double walltubing made of heat shrinkable insulation material and heat shrinkable semiconductive material by the way of special processing technology.Inner layer show good insulation performance,outer layer isof semi-conductive,innerand outer layersareclung closelyshielded reliably.
⊚ Application: It isusedfor the insulationand outershield of medium joint in 35kVand below power cable, and others where it needs for the insulation and shield.
| 内容 Content | 测试方法 Measurement Methods | 指标 Index |
| 硬度(邵尔A) Hardness (Shore A) | ≤90 | |
| 抗张强度(Mpa)TensileStrength | GB/T1040 | ≥12 |
| 断裂伸长率(%) Crack Elongation | GB/T1040 | ≥300 |
| 热老化120Cx168h Heat Aging | K1>0.8,k2>0.7 | |
| 体积电阻率(Ω.cm) Volume Resistivity | GB/T1040 | ≥1x1014 |
| 吸水率(%)Water-AbsorbingRate | ASTMD570 | ≤0.5 |
| 内容 Content | 测试方法 Measurementmethods | 指标 Index |
| 硬度(邵尔A) Hardness (Shore A) | ≤90 | |
| 抗张强度(Mpa) Tensilestrength | GB/T1040 | ≥14 |
| 断裂伸长率(%) Crack elongation | GB/T1040 | ≥300 |
| 热老化120Cx168h Heat aging | K1>0.8,k2>0.7 | |
| 体积电阻率(Ω.cm) Volume resistivity | GB/T1040 | 50~100 |
| 型号规格（mm） Typeand specification | 收缩前内径（mm） Innerdiameterbeforeshrinking | 收缩后内径（mm） Innerdiameteraftershrinking | 总壁厚（±0.5mm） Totalwall thickness | 长度（mm) Length |
| JHDFH 30/11 | ≥30 | ≤1 | 4.5 | 300~1200 |
| JHDFH35/13 | ≥35 | ≤13 | 4.5 | 300~1200 |
| JHDFH 45/16 | ≥45 | ≤16 | 4.5 | 300~1200 |
| JHDFH55/20 | ≥55 | ≤20 | 4.5 | 300~1200 |
| JHDFH 65/25 | ≥65 | ≤25 | 4.5 | 300~1200 |
| JHDFH88/30 | ≥85 | ≤30 | 5 | 300~1200 |
| JHDFH100/38 | ≥100 w.jrcis.com | ≤38 | 5 | 300-1200 |
| X JHDFH 120/45 91207-62733721 | 5 | 300~1200 | ||
三
1kV热缩电缆终端和中间连接
1kVHeat Shrinkable Cable Termination And Cable Joint
：品分单芯、二芯、三芯、四芯、五芯，已广泛应用于低压电线的终端处理和中间连接。
Theproducts include single core,two-core,three-core,four-core,and five-coreseries,whichare widely used for termination treatment and cable joint of low voltage cables.
产品优点
Product features
{ \scriptsize { 1 } } 指套不加垫管即可收紧；
{0} 终端头绝缘管为红、黄、绿、蓝、黑直接分相；
{0} 收缩快、不开裂。
⑨ The fingertip can be stringed without putting the pad.
{ \scriptsize { 1 } } Theinsulationpipeof terminaltionisred,yellow,green, blue and black,with direct phase.
③Fast shrinkage and non-crack.
1kV四芯电缆终端 1kVFour-Core HeatShrinkable CableTermination
| 项目Item | 实验项目Testitem | 标准要求Standard | 实验结果Result | 结论Conclusion |
| 1kV终端及中间连接 1kV terminjtion and | 1min工频耐压试验 1min power- voltagegreistance test | 4kV不闪络、 不击穿 4on-bron-flashn 5h加热、3h冷却、加 | 4kV/min不闪络、不 击穿 4kV/minrnan-flash, | 合格 Qualified |
| 负荷循环试验 Lo(三次yltest (threecycles) 4h工频耐压试验 | 导体温度75℃ 5hnginond 3sh temperatureof75℃ whenheated | To be以下below | ||
| 4h power-frequency voltage resistance test | 2.4kV不闪络、不击 穿 2.4kV non-flash, non-breakdown | 2.4kV/4h未闪络、未 击穿 2.4kV/4h non-flash, non-breakdown | 合格 Qualified |
四芯终端连接图 Four-Core Heat Shrinkable Cable Termination Connection
| cable joint | Load cycle test (three cycles) | onheatingandSn Tobeassessd below temlingtCrenod 7oc | ||
| 4h工频耐压试验 4h power-frequency voltageresistance test | whenheated 2.4kV不闪络、不击 穿 2.4kV non-flash, non-breakdown | 2.4kV/4h未闪络、未 击穿 2.4kV/4h non-flash, non-breakdown | 合格 Qualified | |
| 型号 Item No. | 名称 Name | 适用电缆截面（mm2） | ||
| 1KVJHDRT-2/0 1KVJHDRT-2/2 | V交联电缆热缩型终实设计 1kVTwo-core Heat Shrinkable Cable | Applicablecablesection 0525-56733721 70~120 | ||
| 1KVJHDRT-2/4 1kVJHDRJ-2/0 1KVJHDRJ-2/1 1KVJHDRJ-2/2 1KVJHDRJ-2/3 | 1kVT联电连接Jint | 10~16 25~50 70~120 150~240 | ||
| 1kVJHDRT-3/0 1kVJHDRT-3/1 1KVJHDRT-3/2 1KVJHDRT-3/3 1KVJHDRT-3/4 | 1KV交联电缆热缩型终端头(三芯) 1kVThree-core Heat Shrinkable Cable | 10~16 25~50 70~120 150~240 | ||
| 1KVJHDRJ-3/0 1KVJHDRJ-3/1 1KVJHDRJ-3/2 1KVJHDRJ-3/3 1KVJHDRJ-3/4 | 1kV交联电缆热缩型中间连接（三芯） 1kVThree-core HeatShrinkableCable | 10~16 25~50 70~120 150~240 | ||
| 1KVJHDRT-4/0 1KVJHDRT-4/1 1KVJHDRT-4/2 1KVJHDRT-4/3 1KVJHDRT-4/4 | 1KV交联电缆热缩型终端头(四芯) 1kVFour-core HeatShrinkable Cable | 10~16 25-50 70~120 150~240 300~400 | ||
| 1KVJHDRJ-4/0 1KVJHDRJ-4/4 | 1kVu联Joint | 10~16 70-120 | ||
| 1KVJHDRT-5/0 .jrcis.C1kVJHDRT-5/1 62733721KVJHDRT-5/2 1KVJHDRT-5/3 1KVJHDRT-5/4 | 1KV交联电缆热缩型终端头(五芯) 1kVFive-core Heat Shrinkable Cable Termination | 10~16 25~50 70~120 150~240 | ||
| 1KVJHDRJ-5/0 1KVJHDRJ-5/1 1KVJHDRJ-5/2 1KVJHDRJ-5/3 1KVJHDRJ-5/4 | 1kV交联电缆热缩型中间连接（五芯） 1kVFive-core HeatShrinkable Cable Joint | 10~16 25~50 70~120 150~240 | ||
10kV/24kV/35kV热缩电缆户内、户外终端和中间连接
10kV/24kV/35kVHeatShrinkable CableIndoor/ OutdoorTermination And CableJoint
热缩电缆采用“三道密封”“双地线”工艺—强力推广电缆工作网专家推荐工艺。
Theheatshrinkable cableaccessoriesuses three sealsand twoearthings,which isstronglyrecommended by cable network experts.
规格型号Specification
三芯户内热缩型电缆附件 Three-Core Indoor HeatShrinkable Cable Accessories
□ kV H Y W x□ 电缆截面积Cable section 电缆线芯数Coresofcable N:户内lndoor；W:户外Outdoor；J:中间Joint 7:代表交联电缆Yrefers to cross-linked cable Z:代表油浸电缆Zrefers to oil impregnated cable +:代表浙江海达新材料有限公司 H: stands for Zhejiang Haida New Materials Co., LTD 10:额定电压等级10kVRatedvoltage10kV 24:额定电压等级24kVRatedvoltage24kV 35:额定电压等级35kVRatedvoltage35kV
产品特点Product features
⊚ 交联电缆热缩型终端头双地线工艺。即钢铠地线和铜屏蔽地线分开，使电缆预试更加合理。
A、测铜铠地线与对地电阻，导通时说明电缆内护层已破坏。
B、测两根地线间的电阻，导通时说明外衬层已破坏；测铜屏蔽地线对地电阻，导通时说明电缆内、外护层都已损坏。
C、相色不褪色 技人品牌设计lwww.jrcis.comD、为了施工方便，开发了三角垫锥。
E、指套锥形结构，绝不开裂。
{0} 交联电缆热缩型中间连接新工艺(三道密封工艺)。
A、电缆中间接头故障许多是因为密封不好造成的，我公司采用新工艺(三道密封工艺)，使电缆运行起来更加安全可靠。所谓三道密封即外护层密封、内护层密封再加内绝缘两端的密封，共三道密封。B、绝缘管加长，解决了抓电问题。
C、护套管柔软、收缩快。
③Thecross-linkedcable heat shrinkable terminationuses thedouble-earthing technology，inwhich thesteelarmourearthingseparates fromthecoppershield earthing,so that thecable trial ismore reasonable.
A.Testthesteelarmourearthingandearthresistance,if it isconducted,itmeans thecableprotection surface is dameged.
B.Testtheresistance between twoearthings,if itisconducted,itmeans theexternalsheath isdamaged; testtheearthresistanceof coppershieldearthing,ifitisconducted,itmeans boththeinternal and external protectionsurfacesaredamaged.
C.The phase will never fade.
D.The triangular prick isdeveloped for the purpose of convenient operation.
E.The taper-shaped fingertip will never be cracked.
③Thecross-linked cable heat shrinkable cable joint uses the new technology (three-seal technology).
A.The breakdown of cable intermediary joint iscaused by poor seal,so ourcompanyadopts the new technologytomakethecableoperatemoresafelyand conveniently.The three-seal refers totheexternal protection seal,internal protection seal,and the seal between two ends of insulation tube.
B.The insulation tube is prolonged to solve the problem of power seize.
C.The protection tube is very soft and shrink fastly.
技人品牌设计
户外热缩型电缆附件10kVOutdoor Heat Shrinkable Cable Accessories
⑨ 三芯指套
{ \scriptsize { 1 } } 热缩环
{0} 单孔伞裙
{0} 地线
⊚ 硅脂膏
2号 ⑨ 应力疏散胶
（20 ⑨ 填充胶，密封胶
⑨ 垫锥
{0} 密封管
{0} 绝缘管
{ \scriptsize { 1 } } 三孔伞裙
{0} 应力控制管
⑨ 相色环
⑨ 附料
{ \scriptsize { 1 } } Three-Core Fingertip
⑨ Heat Shrinkable Ring
{0} Single-Aperture Skirt
⊚ Earthing
⊚ Silicone Grease
⑨ Stress Evacuation Paster
⑨ Fill,Sealant
（204号 ⊚ Prick
{0} Seal Tube
{ \scriptsize { 1 } } Insulation Tube
{ \scriptsize { 1 } } Three-Aperture Skirt
{ \scriptsize { 1 } } Stress Control Tube
⑨ Phase Ring
⑨ Fittings
| 1 | 端子Termination |
| 2 | 密封管Seal tube |
| 了 | 绝缘管 Insulation tube |
| 4 | 线芯绝缘Conductor insulation |
| 5 | 应力控制管Stresscontrol tube |
| 6 | 应力疏散胶 Stress evacuation paster |
| 7 | 半导层Semi-conducting surface |
| 8 | 铜屏蔽层Coppershield |
| 9 | 铜屏蔽地线 Copper shield earthing |
| 10 | 垫维Prick |
| 11 | 内护层 Internal protection surface |
| 12 | 填充胶Fill |
| 13 | 铜铠Steel armour |
| 14 | 三芯指套Three-core fingertip |
| 15 | 外护套 External sheath |
| 16 | 铜铠地线 Steel armour earthing |
| 17 | 热缩环 Heat shrinkable ring |
| 1 | 导体Conductor | 10 |
| 2 | 内半导体层 Internal semi-conducting surface | 半导电带 Semi-conducting strip |
| 3 | XLPE绝缘 Insulation | |
| 4 | 外半导电层 External semi-conducting surface | 应力疏散胶 Stress evacuation paster |
| 5 | 铜屏蔽带Copper shield | 密封胶Sealant |
| 支大品牌 | 连接管.Connection tube2733721 rcis.com | 铜屏蔽网Copper shield net |
| 7 | 应力控制管Stress control tube | 铜编织带 Copper weaving net |
| 8 | 内绝缘管 Internal insulation tube | 扎线Band |
| 9 | 外绝缘管 External insulation tube |
燃气管保护用热缩管
Heat Shrinkable Tubing For Gas Pipe Protection
燃气管道用柔软热缩管主要用于家用燃气管道连接管的保护，广泛用于燃气灶，热水器的连接管保护
Flexible heat shrinkable tubing forgas pipelines is mainly usedfor the protectionof connecting pipes in household gaspipelinesand iswidely used for the protectionof connecting pipes in gas stoves and water heaters.
⑨ 产品证书：CEROHSREACH {0} 热缩倍率：2:1 { \scriptsize { 1 } } 起始收缩温度：≥85℃ { \scriptsize { 1 } } 完全收缩温度： 3 1 2 0 ^ { \circ } C ⑨ 使用温度：-55℃\~+125℃ {0} 标准颜色：黄色、红色、蓝色 ⑨ Product certificates: CE,ROHS,REACH ⊚ Heatshrinkage ratio: 2:1 { \scriptsize { 1 } } Initial shrinkage temperature:≥85℃ { \scriptsize { 1 } } Completeshrinkage temperature:≥120℃C ⑨ Operatingtemperature:-55Cto+125℃ {0} Standard colors:yellow,red,blue
| 性能Performance | 指标Indicatorh卑文试验方法Testmethod33721 | ||||||
| 拉伸强度Tensile strength | ≥ 10.4 MPa | ASTMD 2671 | |||||
| 断裂伸长率Elongationatbreak | ≥200% | ASTMD2671 | |||||
| 老化后拉伸强度Tensile strength after aging | ≥7.3 MPa | 158C x168h | |||||
| 老化后断裂伸长率Elongationatbreakafteraging | ≥ 100% | 158℃x168h | |||||
| 轴向变化率Axial rate of change | -5%~+5% | ASTMD 2671 | |||||
| 阻燃性Flameretardancy | FT-2 | ASTMD2671 | |||||
| 规格Specification | 供货内径Suplyiner | 全缩后尺寸Aftershrinkable(mm) | 标准包装 Standarl ackaging | ||||
| 内径 Innerdiameter | 壁厚 | ||||||
| ≤9.0 | Wall thickness 0.5±0.02 | Rice/plate 100 | |||||
| 018/9.0 022/11 | ≥18 | ≥22 | ≤11 | 0.56±0.2 | 100 | ||
| 028/14 | ≥28 | 50 | |||||
| 030/15 | ≥30 | ≤14 ≤15 | 0.58±0.05 0.60±0.05 | 50 | |||
| www.jrcis.com 人品牌设计 | |||||||
| 040/20 | 0577-62733721 | ≤20 | 0.7±0.05 | 50 | |||
| 050/25 | ≥ 50 | ≤25 | 0.7±0.05 | 50 | |||
| 060/30 ≥60 ≤30 | 25 | ||||||
新能源汽车连接排专用热缩管
HeatShrinkable TubingForNewEnergyVehicle 广泛用于电动汽车电池包、变压器和配电板的电力连接铜排的包覆，收缩快，阻燃等级高，使用安全。 It is widelyused forthecoatingof powerconnectioncopperbars inbatterypacks,transformersand distributior boardsof electric vehicles.It has fast shrinkage,high flame retardancy grade and is safe to use.
⑨ 产品证书：CEROHS REACHTS16949
⑨ 热缩倍率：2：1
⑨ 起始收缩温度：≥85℃
{0} 完全收缩温度： 3 1 2 0 ^ { \circ } C
{0} 使用温度：-55℃\~+125℃
⊚ 标准颜色：橙色
⑨ Productcertificate:CEROHSREACHTS16949
⑨ Heat shrinkage ratio: 2:1
⑨ Initial shrinkage temperature:≥85℃
{ \scriptsize { 1 } } Completeshrinkage temperature:≥120℃
{ \scriptsize { 1 } } Operating temperature:-55C to +125℃
{0} Standard color: Orange
小茶
| 性能Performance | 指标Indicatorh卑设 | 试验方法Testmethod | ||||||
| 拉伸强度Tensile strength | ≥ 10.4 MPa | ASTMD2671 | ||||||
| 断裂伸长率Elongationatbreak | ≥ 200% | ASTMD2671 | ||||||
| 老化后拉伸强度 Tensile strength after aging | ≥7.3MPa | 158℃x168h | ||||||
| 老化后断裂伸长率Elongationatbreakafteraging | ≥100% | 158°C x168h | ||||||
| 轴向变化率Axial rateof change | -5%~+5% | ASTM D 2671 | ||||||
| 阻燃性Flameretardancy | VW-1V0 | ASTMD2671 | ||||||
| 耐电压Withstand voltage (600V) | 2500V，1min不击穿 Don't break through | UL224 | ||||||
| Breakdowntrth强tregtdithadtae | ≥ 15kV/mm | ASTMD149 | ||||||
| 体积电阻率Volume resistivity | ≥1014 Ω·cm | IEC 60093 | ||||||
| 规格Specification | 完全缩后尺寸Aftershrinkable(mm) | 标准包装（米/盘） | ||||||
| Inner liameter | WallthicknessA | WillthiknssBs | Wall thiknssCc | Standare packaging 100 | ||||
| 016 | ≤8.0 | 0.7±0.10 | 1.0±0.15 | |||||
| 018 | ≤9.0 | 0.7±0.10 | 1.0±0.15 | 1.4±0.2 | 100 | |||
| 020 | ≤10 | 0.7±0.10 | 1.0±0.15 | 1.4±0.2 | 100 | |||
| 022 | ≤ 11 | 0.7±0.10 0.7±0.10 | 1.0±0.15 | 1.4±0.2 | 100 | |||
| 025 ≤12.5 | 1.4±0.2 | 50 | ||||||
| X 28万牌技 ≤14 0577-6273370.7±0.10 | 1.4±0.2 | 50 | ||||||
| 030 | ≤15 | 0.7±0.10 | 1.0±0.15 | 1.4±0.2 | 50 | |||
| 035 | ≤ 17.5 | 0.7±0.10 | 1.0±0.15 | 1.4±0.2 | 50 | |||
| 040 | ≤20 | 0.7±0.10 | 1.0±0.15 | 1.4±0.2 | 50 | |||
| 045 | ≤22.5 | 0.7±0.10 | 1.0±0.15 | 1.4±0.2 | 50 | |||
热缩指套 Heat Shrinkable Fingertip
| 型号 Item No. | 编号 Order numaber | 收缩前(mm)Beforerecovered | 收缩后(mm)Afterrecovered | ||
| 大端Bigend | 小端Small end | 大端Big end | 小端Small end | ||
| 二芯 Two way | HY(BC)2ZT-0 | 33 | 10 | 12 | 3.4 |
| HY(BC)2ZT-1 | 48 | 15 | 19 | 5 | |
| HY(BC)2ZT-2 | 65 | 20 | 22 | 8 | |
| HY(BC)2ZT-3 | 98 | 38 | 37 | 14.2 | |
| 三芯 Three way | HY(BC)3ZT-00 | 34 | 15 | 20 | 5.5 |
| HY(BC)3ZT-0 | 50 | 25 | 27 | 6.9 | |
| HY(BC)3ZT-1 | 75 | 32 | 38 | 10 | |
| HY(BC)3ZT-2 | 86 | 40 | 48 | 14 | |
| HY(BC)3ZT-3 | 112 | 50 | 60 | 18.5 | |
| HY(BC)3ZT-4 | 135 | 63 | 70 | 24 | |
| Four ay | HY(BC)4ZT-0 | 40 | 15 | 22 | 5 |
| HY(BC)4ZT-1 | 55 | 20 | 25 | 6 | |
| HY(BC)4ZT-2 | 73 | 27 | 33 | 8 | |
| HY(BC)4ZT-3 | 86 | 34 | 40 | 11 | |
| HY(BC)4ZT-4 | 105 | 38 | 41 | 11.5 | |
| 五芯 Five way | HY(BC)5ZT-0 | 40 | 13 | 21 | 4 |
| HY(BC)5ZT-1 | 54 | 17 | 28 | 5.2 | |
| HY(BC)5ZT-2 | 80 | 26 | 39 | 9 | |
| HY(BC)5ZT-3 | 100 | 36 | 48 | 11 | |
11
热缩带
Heat Shrinkable Tape
具有良好的阻燃绝缘性能，并复合热熔胶可实现自粘作用。复合热缩带用于污闪严重各需要补修的地方和不宜用热缩管实施绝缘处理的地方。
It hasexcellentflame-retardantand insulatingproperties,and whencombinedwith hot meltadhesive,it can achieveself-adhesive effect.Composite heat shrinkable tape isused inareas withseverepolution flashover that need to be repaired and where insulation treatment with heat shrinkable tubing is not suitable.
| 型号 Item No. | 宽度 Width | 长度 Length | 厚度 Thickness |
| MPD50×5000×0.8 | 50 | 5000 | 0.8 |
| MPD50×5000×1 | 50 | 5000 | 1 |
| MPD50×5000×1.4 | 50 | 5000 | 1.4 |
| 项目Project | 参数Parameters | ||
| 拉伸强度(Mpa)Tensile strength (Mpa) | ≥15 | ||
| 断裂伸长率(%)Elongationatbreak (%) | >400 | ||
| rC|体积电阻率(Ω/cm)Volumeresistivity (Ω/cm) | 1.0x1013 | ||
| 击穿强度(kV/min)Breakdownstrength(kV/min) | ≥25 | ||
| 热老化Thermal aging | 没有裂缝， 感觉很好Nocrack,feltwell | ||
| 冲击电压(kV)lmpulsevoltage (kv) | 42 | ||
| 氧指数Oxygenindex | ≥25 | ||
| 铜腐蚀Copper corrosion | 2级Level2 | ||
| 名称Name | 型号Item No. | ApplicabieBusarSize (m) | 类型Type | 电压Voltage |
| 单排接头盒 Single-row joint box | JHD-30/1 | 30×3 | ||
| JHD-40/1 | 40×4 | |||
| JHD-50/1 | 50×5 | |||
| JHD-60/1 | 60×6 | |||
| JHD-70/1 | 70×8 | |||
| JHD-80/1 | 80×8 | |||
| JHD-100/1 | 100×10 | |||
| JHD-120/1 | 120×10 | |||
| JHD-150/1 | 150×10 | |||
| JHD-30/2 | 30×3 | |||
| JHD-40/2 | 40×4 | |||
| JHD-50/2 | 50×5 | |||
| JHD-60/2 | 60×6 | |||
| JHD-70/2 | 70×8 | |||
| JHD-80/2 | 80×8 | |||
| JHD-100/2 | 100×10 | |||
| JHD-120/2 | 120×10 | |||
| JHD-150/2 | 150×10A凸 www.jrcis.com |
热风枪
Hot Gun
产品特点
⊚ 格栅式出风口设计、送风均匀、强劲有力{0} 双重发热丝、过载保护、快速升温不怕过载{ \scriptsize { 1 } } PP+30玻纤主体外壳、更加隔热防摔防刮{ \scriptsize { 1 } } 两档风速调节开关、根据自身需求随心调节温度{ \scriptsize { 1 } } 365大功率纯铜电机、运转均匀稳定、使用寿命更长
ProductFeatures
{0} The grid-type air outlet design ensures uniform air distribution and powerful performance.
{ \scriptsize { 1 } } Dual heating wires,overload protection,rapid temperature rise,no fear of overload.
{ \scriptsize { 1 } } PP+30 fiberglass main bodyshell,better heat insulation,drop resistance and scratch resistance.
{0} Two wind speed adjustment switches,allowing you toadjust the temperatureas you likeaccording to your own needs.
③365 High-power pure copper motor,uniform and stable operation,longer service life.
| Working温prature | 300-600°℃ | A空气流量t | 300-500L |
| Powe suplytype | Ac p交流电supply | Rad电tage | 220V |
| Workigeurent | 7.5A | Rad 输p入tpower | 2000W |
⊚ 端子材料：紫铜 ③Terminal body: Copper
| 护套材料：PVC 镀层：锡 | Inulation: PVC Plating: Tin | PPp | |||||||||||||
| ItmNo. | W | 美制 | 颜色r | ||||||||||||
| d2 | |||||||||||||||
| RV 1.25-3 | #4 | 3.2 | 5.7 | 17.8 | 4.9 | d | 红d B蓝ue | ||||||||
| RV 1.25-3.5S | #6 | 3.7 | 5.7 | 17.8 | 4.9 | ||||||||||
| RV 1.25-4S | #8 | 4.3 | 6.6 | 20.1 | 6.3 | ||||||||||
| RV 1.25-4L | 0.75 | #8 | 4.3 | 8.0 | 21.5 | 7.0 | |||||||||
| RV1-25 | 02.-1.65 | 19A | 55 | 808 | 230 | 7076 10.7 4.2 | |||||||||
| 1/4 | 6.4 | 9.8 | 23.0 7.6 | ||||||||||||
| RV 1.25-6S | 5/16 | 8.4 | 11.627.5 | 11.1 | |||||||||||
| RV 1.25-8 | 3/8 | 10.5 | 13.6 | 31.613.9 | |||||||||||
| RV 1.25-10 | 1/2 | 13.0 | 19.2 | 36.0 16.5 | 2.3 | ||||||||||
| RV 1.25-12 | 技人 | #4 | 3.2 | 6.6 | 18.5 | 4.3 | www.jrci | ||||||||
| RV 2-3 | 0577-62733 | ||||||||||||||
| RV2-3.5S | #6 #8 | 3.7 | 6.618.5 | 4.7 | |||||||||||
| RV2-4S | #8 | 4.3 4.3 | 6.6 8.522.5 | 20.06.5 7.7 | |||||||||||
| RV 2-4L | 1.5-245 | 0.8 | 27A | #10 | 5.3 | 8.522.5 | 7.7 | 4.9 | |||||||
| RV2-5S | 10.7 7.0 | ||||||||||||||
| RV2-5L | #10 1/4 | 5.3 | 9.5 | 22.5 | |||||||||||
| RV2-6S | 5/16 | 6.4 8.4 12.0 | 9.522.5 | 7.0 27.6 | 11.0 | ||||||||||
| RV 2-8 | 3/8 | 10.514.6 | 31.213.0 | 3.0 | Back | ||||||||||
| RV2-10 RV2-12 | 1/2 | 13.019.235.715.5 | |||||||||||||
| #8 | 4.3 | 8.0 | 25.3 | 7.7 | |||||||||||
| RV3.5-4 | 1.0 | 37A | #10 | 5.3 | 8.0 | 25.3 | 7.7 | ||||||||
| RV 3.5-5S | 04 | 5.8 | |||||||||||||
| RV 356 | 2.5-40 | 564 | 1020 | 220 | 33 | 13.8 | Yeow | ||||||||
| 5/16 | 8.4 | 14 | 15.035.0 | ||||||||||||
| RV 3.5-8 RV3.5-10 | 3/8 | 10.515.0 | 34.6 | 14 | |||||||||||
| RV 5.5-4S | 1.0 | 1/4 5/16 | #8 | 4.3 | 7.2 | 22.7 5.9 | 3.4 | ||||||||
| RV 5.5-4L | #8 | 4.3 | 9.5 | 26.3 | 8.3 26.38.3 | 6.412.030.011.014.0 6.3 13.7 | |||||||||
| RV5.5-5m | 4.0-6.0 | 48A | #10 | 5.3 9.5 | |||||||||||
技人品牌设计1ww
| 端子材科：累铜 护套材料：PVC 镀层：锡 | Inulation: PVC Plating: Tin | matbouy.Copper | ||||||||||
| It型. | ||||||||||||
| 最大电 | d2 | D | 颜色r | |||||||||
| SV 1.25-3.2 | #4 | 3.2 | 5.7 | 21.2 | 6.5 | |||||||
| SVS 1.25-3.5 | #6 | 3.7 | 5.7 21.2 | 6.5 | ||||||||
| SVL 1.25-3.5 | #6 | 3.7 | 6.4 | 21.2 | 6.5 | |||||||
| SVS 1.25-4 | #8 | 4.3 | 6.4 | 21.2 | 6.5 | |||||||
| SVM 1.25-4 | 0.75 | #8 | 4.3 | 7.2 | 21.2 | 6.5 | 10 | 4.3 | ||||
| SVL 1.25-4 | 0.5-15 | 19A | #8 | 4.3 8.1 | 21.2 | 6.5 | ||||||
| SVS 1.25-5 | #10 | 5.3 | 8.1 | 21.2 | 6.5 | |||||||
| SVL 1.25-5 | #10 | 5.3 | 9.5 | 21.2 | 6.5 | |||||||
| SVS 1.25-6 | 1/4 | 6.4 9.5 | 21.2 | 6.5 | ||||||||
| SVL 1.25-6 | 1/4 | 6.4 | 12 27.2 | 11 | ||||||||
| SV 1.25-8 | 又 | #4 | 5/16 | 8.4 14 | 29 | 21.2 | 12.5 6.5 | 0577-6273 | ||||
| SV 2-3.2 | 3.2 | 5.7 5.7 | 21.2 | 6.5 | ||||||||
| SVS2-3.5 | #6 | 3.7 | ||||||||||
| SVL 2-3.5 | #6 | 3.7 | 6 | 21.2 | 6.5 | |||||||
| SVS2-4 | 0.8 | #8 | 4.3 | 6.4 | 21.2 | 6.5 | ||||||
| SVM2-4 | #8 | 4.3 | 7.2 | 21.2 | 6.5 | 4.3 | ||||||
| SVL 2-4 | 1.5-245 | 27A | #8 | 4.3 | 8.1 | 21.2 | 6.5 | 10 | ||||
| SVS2-5 | #10 | 5.3 | 8.1 | 21.2 | 6.5 | |||||||
| SVL 2-5 | #10 | 5.3 | 9.5 | 21.2 | 6.5 | |||||||
| SVS 2-6 | 1/4 | 6.4 | 9.5 | 21.2 | 6.5 | |||||||
| 1/4 | 6.4 | 12 | 27.2 | 1 | ||||||||
| SVL 2-6 | 5/16 | 8.4 | 14 | 29 | 12.5 | |||||||
| SV 2-8 SV 3.5-3 | #4 | 3.2 | 5.7 | 24.8 | 7 | 6.2 黑色 Y黄色w | ||||||
| SV3.5-4 | #8 | 4.3 8 | 24.8 | 7 | ||||||||
| SV 3.5-5 | 25-420 | 1.0 | 37A | #10 | 5.3 | 8 | 24.8 | 7 | 13 | |||
| SV 3.5-6 | 1/4 | 6.4 | 12 | 28 | 12.1 | |||||||
| SV 3.5-8 | 5/16 | 8.4 | 12 | 33.7 | 13.7 | 6.7 | ||||||
| SV 5.5-3.5 | #6 | 3.7 | 8.3 | 25.2 | 7.5 | |||||||
| SVS 5.5-4 | #8 | 4.3 | 8.3 | 25.2 | 7.5 | |||||||
| SVL5.5-4 | 1.0 | #8 | 4.3 | 9 | 25.2 | 7.5 | 13 | |||||
| SV 5.5-5 | 410-600 | 48A | #10 | 5.3 | 9 | 25.2 | 7.5 | |||||
| SVS 5.5-6 | 1/4 | 6.4 | 9 | 25.2 | 7.5 | |||||||
| SVL 5.5-6 | 1/4 5/16 | 6.4 8.4 | 12 14 | 31.2 30 | 12 11.5 | |||||||
母预绝缘接头（FDD型）
Vinyl-Insulated Female Disconnect (FDD Type)
Terminal Body: Brass
| 镀层：锡 Plating:Tin | |||||||||||
| 型号 ItemNo. | 导线截面 WireRange (A.W.G.) | 接插规格 Nema Tab (mm) | 最大电流 Current （A) | 材料厚度 Thickness (mm) | 尺寸Dimension(mm) | 颜色 Color | |||||
| W | dg | D | L | ||||||||
| FDD 1.25-110 (5) | 0.5-1.5 (22-16) | 0.5x2.8 | 10A | 0.35 | 3.8 | 1.7 | 3.8 | 19.0 | 10.0 红 Red | ||
| FDD 1.25-110 (8) | 0.8×2.8 | 3.8 | 1.7 | 3.8 | 19.0 | ||||||
| FDD 1.25-187 (5) | 0.5×4.75 | 5.6 | 1.7 | 3.8 | 19.0 | ||||||
| FDD 1.25-187 (8) | 0.8×4.75 | 5.6 | 1.7 | 3.8 | 19.0 | ||||||
| FDD 1.25-250 | 0.8x6.35 | 0.4 7.4 | 1.7 | 3.8 | 21.0 | ||||||
| FDD2-110(5) | 0.5x2.8 | 3.8 2.3 | 4.3 | 19.0 | B蓝u | ||||||
| FDD2-110(8) | 1.5-2.5 | 0.8×2.8 15A | 0.35 | 3.8 | 2.3 | 4.3 | 19.0 | 10.0 | |||
| FDD2-187(5) | 0.5×4.75 | 5.6 | 2.3 | 4.3 19.0 | |||||||
| FDD2-187(8) | 0.8×4.75 | 5.6 | 2.3 | 4.3 19.0 | |||||||
| FDD2-250 | 0.8x6.35 | 7.4 | 2.3 4.3 | 21.0 | |||||||
| FDD 5.5-250 | 4.0-600 | 0.8x6.35 | 24A | 0.4 0.1 | 7.40 | 3.4 | 5.7 | 25.0 13.0 | |||
公预绝缘接头(MDD型)
Vinyl-Insulated Male Disconnect (MDD Type)
Terminal Body: Brass
| 镀层：锡 Plating:Tin | |||||||||||
| 型号 Item No. | 导线截面 mm² WireRange (A.W.G.) | 接插规格 Nema Tab (mm) | 最大电流 Max Current （A) | 材料厚度 Thickness (mm) | 尺寸Dimension(mm） | 颜色 Color | |||||
| B | d | D | L | ||||||||
| MDD 1.25-110(5) | 0.5-15 | 0.5x2.8 | 10A | 0.35 | 2.8 | 1.7 | 4.3 | 17.7 | 红d | ||
| MDD 1.25-110(8) | 0.8x2.8 | 2.8 | 1.7 | 4.3 | 17.7 | ||||||
| MDD1.25-187(5) | 0.5 x 4.75 | 4.75 | 1.7 | 4.3 | 20.010.0 | ||||||
| MDD 1.25-187(8) | 0.8×4.75 | 4.75 | 1.7 | 4.3 | 20.0 | ||||||
| MDD 1.25-250 | 0.8x6.35 | 0.4 | 6.35 | 1.7 | 4.3 21.0 | ||||||
| MDD2-110(5) | 0.5x 2.8 | 0.35 | 2.8 | 2.3 | 4.3 | 17.7 17.7 | B蓝e 25.0 13.0 Yeow | ||||
| MDD2-110(8) | 1.5-2.45 | 0.8x2.8 | 2.8 | 2.3 | 4.3 | ||||||
| MDD.2-187(5) | 0.5x4.75 | 15A | 4.75 | 2.3 | 4.3 | 20.010.0 | |||||
| MDD 2-187(8) | 0.8 x 4.75 | 4.75 | 2.3 | 4.3 | 20.0 | ||||||
| MDD2-250 | 4.0-600 | 0.8x6.35 | 0.4 0.1 | 6.35 6.35 | 2.3 3.4 | 4.3 5.7 | 21.0 | ||||
尼龙母预绝缘接头(FDFN型)
Nylon-Insulated Female Disconnect (FDFN Type)
Terminal Body:Brass Insulation: Nylon Plating: Tin
| Itmo. | Wre Rang (A.W.G.) | 接插格b (mm) | nt （A) | 料度s (mm) | 尺寸Dimension(mm) | 颜色r H | |||||
| W | de | D | L | ||||||||
| FDFN 1.25-110 (5) | 0.5-1.5 | 0.5×2.8 | 10A | 0.35 | 3.8 | 1.7 | 3.8 | 19.0 19.0 | 10.0 | 红d | |
| FDFN 1.25-110 (8) | 0.8 ×2.8 | 3.8 | 1.7 | 3.8 | |||||||
| FDFN 1.25-187 (5) | 0.5× 4.75 | 5.6 | 1.7 | 3.8 | 19.0 | ||||||
| FDFN 1.25-187 (8) | 0.8x4.75 | 5.6 | 1.7 | 3.8 | 19.0 | ||||||
| FDFN 1.25-250 | 0.8x 6.35 | 0.4 | 7.4 1.7 | 3.8 | 21.0 | ||||||
| FDFN2-110(5) | 0.5x2.8 | 0.35 | 3.8 | 2.3 | 4.3 | 19.0 | |||||
| FDFN2-110(8) | 1.5-2.5 4.0-6.0 (12-10) | 0.8 ×2.8 | 15A | 3.8 | 2.3 | 4.3 | 19.0 | 10.0 | 蓝u 黄 Yellow | ||
| FDFN2-187(5) | 0.5 x4.75 | 4.3 | |||||||||
| 5.6 | 2.3 | 19.0 | |||||||||
| FDFN2-187(8) | 0.8 x 4.75 | 5.6 | 2.3 | 4.3 | 19.0 | ||||||
| FDFN2-250 FDFN 5.5-250 | 0.8 x 6.35 0.8x 6.35 | 0.4 0.1 | 7.4 2.3 7.40 3.4 | 4.3 5.7 | 21.0 25.013.0 | ||||||
PVC母全绝缘接头(FDFD型）适用于软线）
Vinyl-Fully Insulated Female Terminal (FDFD Type) (ApplyIn FlexibleWire)
| 端子材料：黄铜 Terminal Body:Brass 镀层：锡 Plating: Tin | ||||||||||
| 型号 ItemNo. | 导线截面 WireRange (A.W.G.) | 接插规格 Nema Tab (mm) | 最大电流 Current （A) | 材料厚度 Thickness (mm) | 尺寸Dimension(mm) | 颜色 Color | ||||
| W | d | DQ | L | |||||||
| FDFD 1.25-110(5) | 0.5-1.5 | 0.5×2.8 | 0.35 | 3.5 | 1.7 | 3.8 | 20.0 | 红d 21.5 蓝 | ||
| FDFD 1.25-110(8) | 0.8×2.8 | 3.5 | 1.7 3.8 | |||||||
| FDFD 1.25-187(5) | 0.5x4.75 10A | 5 1.7 | 3.8 | |||||||
| FDFD 1.25-187(8) | 0.8x4.75 | 5 | 1.7 | 3.8 | ||||||
| FDFD1.25-250 | 0.8x 6.35 | 6.5 | 1.7 | 3.8 | ||||||
| FDFD2-110(5) | 0.5x2.8 | 3.5 | 2.3 | 4.3 | ||||||
| FDFD2-110(8) | 1.5-2.5 (16-14) 4.0-600 | 0.8×2.8 | 15A | 0.35 0.4 | 3.5 | 4.3 | 20.0 Blue Yelow | |||
| FDFD2-187(5) | 0.5×4.75 | 2.3 2.3 | ||||||||
| 5 | 4.3 | |||||||||
| FDFD2-187(8) | 0.8×4.75 | 5 | 2.3 | 4.3 | ||||||
| FDFD2-250 FDFD5.5-250 | 0.8 ×6.35 0.8x 6.35 | 6.5 6.50 | 2.3 3.4 | 4.3 21.5 5.7 25.5 | ||||||
尼龙全绝缘护套母插端子(FDFN型)（适用于软线)
Nylon-Fully Insulated Female Terminal (FDFNType) (ApplyInFlexibleWire)
技人品
③Terminal Body:Brass Insulation: Nylon ③Plating: Tin
| 型号 Item No. | 导线截面 Wir.w.ange | 最大电流 Current | 材料厚度 Thickteial | 尺寸Dimension(mm) | de | 颜色 Color | ||||
| W | F | L | B | D | ||||||
| FDFN 1.25-110 | 0.5~1.5 (22~16) | 10A | 0.3 | 3.2 | 6.4 | 20.4 | 11.0 | 4.4 | 1.7 | 红 Red |
| FDFN 1.25-187 | 0.4 | 5.0 | 6.4 | 21.4 | 10.5 | 3.5 | ||||
| FDFN 1.25-250 | 6.6 | 7.3 | 22.0 | 11.0 | 4.5 | |||||
| FDFN2-110 | 0.3 | 3.2 | 6.4 | 20.4 | 11.0 4.5 | |||||
| FDFN2-187 | 1.5~2.5 (16~14) 4.0~6.0 | 15A 24A | 0.4 | 5.0 | 6.4 | 20.4 | 11.0 | 4.2 | 2.3 黄 3.4 Yellow | 蓝 Blue |
| FDFN2-250 | 6.6 | 7.3 | 22.4 | 11.5 | 4.8 | |||||
| FDFN5.5-250 | 0.4 | 6.6 | 7.6 24.2 | 13.0 | 6.6 | |||||
尼龙全绝缘护套公插端子(MDFN型)（适用于软线)
Nylon-FullyInsulatingMale Terminal (MDFNType) (ApplyInFlexibleWire)
| 端子材料：黄铜 Terminal Body: Brass 护套材质：尼龙 Insulation: Nylon 镀层：锡 Plating: Tin | ||||||||||
| 型号 Item No. | 导线截面 mm² Wire R.W.G.) | 最大电流 Max Current | 接插规格 Connecting spec | 材料厚度 Thickness ofmaterial | W | 尺寸Dimension(mm) F L B | DO de | 颜色 Color | ||
| MDFN1.25-250 | 0.5-165 | 10A | 0.8×6.35 | 0.4×2 | 6.35 8.0 24.0 11.5 | 4.5 1.7 | 红d | |||
| MDFN2-250 | 1.5~2.5 (16~14) | 15A | 0.8×6.35 | 0.4×2 | 6.358.024.3 | 11.3 4.5 | 2.3 | 蓝 Blue | ||
| MDFN5.5-250 | 4.0-600 | 24A | 0.8×6.35 | 0.4×2 | 6.358.0 25.5 14.0 6.5 3.4 | Yelow | ||||
PVC全绝缘护套子弹形母插端子（FRD型）（适用于软线）
Vinyl-Fully Insulated BulletReceptacle (FRDType) (Apply In Flexible Wire)
| 材料：黄铜 Raw Material: Brass | ||||||||||
| It型o. | Wre | R寸Dimegsai | 颜色r | |||||||
| WO | L | |||||||||
| FRD 1.25-156 | 0.5-15 | 10A | 0.4 | 6.0 | 3.9 | 3.7 | 1.7 | 13.0 | 23.0 | 红d |
| FRD2-156 | 1.5-2.5 | 15A | 0.4 | 6.1 | 3.9 | 4.3 | 2.3 | 14.0 | 24.0 | B蓝e |
| FRD2-195 | 7.0 4.9 | 4.3 | 2.3 | 14.0 | ||||||
| FRD 5.5-195 | 40-6.0 | 24A | 0.4 | 7.0 | 4.9 | 5.3 | 3.4 | 14.0 | 25.5 | Yeow |
PVC绝缘护套子弹形公插端子(MPD型)（适用于软线)
Vinyl-lnsulated Male Bullet (MPDType)(ApplyIn Flexible Wire)
| 材料：黄铜 RawMaterial:Brass | |||||||||||
| ItmNo. | R Diersmim | ||||||||||
| WO | L | 颜色r | |||||||||
| MPD 1.25-156 | 0.5-15 | 10A | 0.4 | 4.0 | 3.7 | 1.7 | 11.0 | 10.6 | 22.0 | 红d | |
| MPD2-156 | 1.5~2.5 (16~14) | 15A | 0.4 | 4.0 | 4.3 | 2.3 | 11.0 | 11.0 | 22.0 | 蓝 Blue | |
| MPD2-195 | 5.0 4.3 | 2.3 | 11.0 | 11.0 | 22.0 | ||||||
| MPD5.5-195 52733721 cIs.com | 4.0-600 | 24A | 0.4 | 5.0 | 5.3 | 3.4 | 12.0 | 13.5 | 25.0 | Yeow | |
尼龙全绝缘护套子弹形母插端子（FRFNY型)（适用于软线）
Vinyl-Fully Insulated Fenale BulletReceptacle (FRFNYType) (Apply In Flexible Wire) 技人
| 材料：黄铜 绝缘护套：尼龙 | RawMaterial:Brass Insulation: Nylon | 颜色r | ||||||||
| Itmo. | M最大ur流nt | WO | R时Dimensm | F | ||||||
| FRFNY 0.5-0.78 | 04-10 | 9A | 0.3 | 5.2 | 2.0 | 3.9 | 1.4 | 24.5 14.0 | wite | |
| FRFNY 1.25-156 | 0.5-15 | 10A | 0.4 | 5.9 | 3.9 | 4.2 | 1.7 | 24.514.0 | 红Red | |
| FRFNY 2-156 | 1.5-2.45 | 15A | 0.4 | 5.9 | 3.9 | 4.2 | 2.4 | 24.514.0 | 蓝Blue | |
| FRFNY5.5-195 | 4.0~6.0 (12~10) | 24A | 0.4 | 6.9 | 4.9 | 6.3 | 3.5 | 27 | 14.0 | 黄 Yellow |
尼龙全绝缘护套子弹形公插端子(MRFNY型)(适用于软线)
Nylon-Fully Insulated Male Bullet Receptacle (MRFNYType) (ApplyInFlexibleWire)
| 材料：黄铜 ③绝缘护套：尼龙 | Raw Material: Brass Insulation: Nylon | |||||||||
| ItmNo. | M最大urnt | WO | F | 颜色r | ||||||
| MRFNY 0.5-0.78 | 0.3~1.0 (24~18) | 9A | 0.3 | 5.2 | 2.0 | 3.9 | 1.4 | 25.0 15.5 | 白 White | |
| MPFNY1.25-156 | 0.5-15 | 10A | 0.4 | 7.5 | 4.0 | 4.2 | 1.8 | 25.515.5 | 红d | |
| MPFNY2-156 | 1.5-25 | 15A | 0.4 | 7.5 | 4.0 | 4.2 | 2.4 | 25.515.5 | 蓝e | |
| jrcis.com MPFNY5.5-195 | 4.0~6.0 (12~10) | 24A | 0.4 | 8.5 | 5.0 | 6.3 | 3.5 | 27.5 | 17.5 | 黄 Yellow |
牌设计 www.jrcis.com? 0577 733721X
BV长型全绝缘中间接头(红色) Insulated Butt Connector(Red)
| ③绝缘材料：PVC 端子体：铜 镀层：锡 | Insulation: PVC ③Terminal Body: Copper Plating:Tin | ||||||
| 型号 Item No. | 尺寸Dimension (mm) | 接线范围WireRange | Imax | 颜色Color | |||
| 一 | da | L | A.W.G. | mm² | |||
| BV 1.25 | 15.0 | 1.9 | 26.0 | 22-16 | 0.5-1.5 | 19A | 红Red |
| BV8 | 21.0 | 4.5 | 32.0 | 8.0 | 6-10 | 62A | |
| BV38 | 32.0 | 9.4 | 55.0 | 2.0 | 25-35 | 160A | |
| 端子体：铜 镀层：锡 | ③Terminal Body:Copper Plating: Tin | wwwircis.com | |||||
| 型号 Item No. | 尺寸Dimension (mm) | 接线范围Wire Range | 0577-6273210 | ||||
| 一 | d | L | A.W.G. | mm² | |||
| BV2 | 15.0 | 2.3 | 26.0 | 16-14 | 1.5-2.5 | 27A | 蓝Blue |
| BV14 | 26.0 | 5.8 | 42.0 | 6.0 | 10-16 | 88A | |
| 端子体：铜 镀层：锡 | Insulation: PVC ③Terminal Body: Copper ③Plating:Tin | ||||||
| 尺寸Dimension (mm) | 接线范围WireRange | Imax | 颜色Color | ||||
| Item No. | d | L | A.W.G. | mm² | |||
| BV 5.5 | 15.0 | 3.4 | 26.0 | 12-10 | 4-6 | 48A | 黄Yellow |
| CBV22om | 29.0 | 7.7 | 50.0 | 4.0 | 16-25 | 115A | |
PVC绝缘护套片形端子（DBV型）适用于软线）
Vinyl-Insulated Blade Terminal (DBVType) (ApplyInFlexible Wire)
技人品
| 型号 Item No. | 导线截面 mm² WireRange (A.W.G.) | 材料厚度 Thickness | 最大电流 MaxCurrent | 尺寸Dimension(mm) | 颜色 Color | |||||
| W | L | F | E | DQ | do | |||||
| DBV 1.25-10 | 0.5~1.5 (22~16) | 0.75 | 19A | 2.3 | 20.7 | 10.0 | 10.7 | 4.2 | 1.7 | 红 Red |
| DBV 1.25-14 | 2.3 | 24.7 | 14.0 | |||||||
| DBV2-10 | 1.5~2.5 (16~14) | 0.8 | 27A | 2.8 | 19.7 | 10.0 | 10.7 | 4.9 | 2.3 | 蓝 Blue |
| DBV2-14 | 2.4 | 24.7 | 14.0 | |||||||
| DBV 5.5-10 | 4.0-600 | 1.0 | 48A | 2.8 | 23.5 | 10.0 | 13.7 | 6.5 | 3.0 | Ye黄ow |
| DBV5.5-14 | 4.5 | 27.5 | 14.0 | |||||||
| DBV 5.5-18 | 4.5 | 32.0 | 18.0 | |||||||
| DBV8-14 | 6~10(8) | 1.2 | 62A | 5.0 | 31.0 | 14.0 | 17.0 | 8.2 | 4.8 | 红 Red |
| DBV14-16 | 10~16(6) | 1.4 | 88A | 6.0 | 37.5 | 16.0 | 21.0 | 10.2 | 6.2 | 蓝 Blue |
| 材质：PVC+紫铜 ③Raw Material: PVC& Copper | ||||||||||||
| ItmNo. | M最大ur流nt | 颜色r | ||||||||||
| W | do | |||||||||||
| PTV 1.25-10 | 0.5~1.5 (22~16) | 0.75 | 19A | 1.9 20 | 10 | 10.0 | 4.2 | 1.7 | 红 Red | |||
| PTV 1.25-12 | 1.9 | 22 | 10 | 12.0 | ||||||||
| PTV 1.25-18 | 1.9 | 28 | 10 | 18.0 | ||||||||
| PTV2-10 | 1.5-2.5 | 0.8 | 27A | 1.9 | 20 | 10 | 10.0 | 4.9 | 2.3 | B蓝e | ||
| PTV 2-12 | 1.9 | 22 | 10 | 12.0 | ||||||||
| 273PTV2-18 | 1.9 | 28 | 10 | 18.0 | ||||||||
| PTV 3.5-10 | 2.5-40 | 1.0 | 36A | 2.8 | 23 | 13 | 10.0 | 5.8 | 3.0 | B黑ck | ||
| PTV 3.5-13 | 2.8 | 26 | 13 | 13.0 | ||||||||
| PTV5.5-13 4.0-600 | 48A | 2.8 26 | 13 | 13.0 | ||||||||
PVC绝缘护套针形端子(PTV型)（适用于软线)
Vinyl-Insulated Pin Terminal (PTVType) (Apply In Flexible Wire)
9"棘轮式压接钳(欧洲型)
Ratchet Crimping Plier (European Style)
棘轮式压接钳的元件采用特殊钢制作而成。
{ \scriptsize { 1 } } 符合人体工程学之结构设计；
{ \scriptsize { 1 } } 精密的压线模块和整体锁定(自定释放机械装置)设计保证在反复压线时能保持较高质量的压线标准；
{ \scriptsize { 1 } } 出厂前已经过精密准确调校；
{ \scriptsize { 1 } } 由于设定了最佳的握柄位置，以及采用轻便紧凑的结构和符合人体工程学原理的手柄形状的设计；
⑨ 确保了其具有良好的压线效果。
The components of the ratchet crimping pliers are made of special steel.
⊚ Thecomponentsof the ratchet crimping toolsaremadeof special steel.
⑨ Designed according to human factorsengineering,itcansave 50 % energy when crimping.
{ \scriptsize { 1 } } Precisecrimping diesetsand integral lock with self releasing mechanism ensure high-qualitycrimping effectaftercrimping repeatedly.
{0} Accurate adjustment before ex works delivery.
⑨ Due to best handle grasping position,light and compact structure and handle design ensure perfect crimping effect.
| 工具参数Toolparameters | |
| 压接能力Crimpingcapacity | 1(0.5-1.75),2(1-3), 5(2.5-6)mm2 |
| 美国标准AWG | 20-10AWG |
| 长度Length | 230mm |
| 重量Weight | 0.6Kg |
| 工具参数Tool parameters | |
| 压接能力Crimping capacity | 0.5-1.5,1.1-2.5,2.6-6.0mm2 |
| 美国标准AWG | 20-10AWG |
| 长度Length | 230mm |
| 重量Weight | 0.6Kg |
| 工具参数Toolparameters | |
| 压接能力Crimpingcapacity | 0.25-0.5,0.5-1.5,1.5-2.5,4.0-6.0mm² |
| 美国标准AWG | 23-10AWG |
| 长度Length | 230mm |
| 重量Weight | 0.6Kg |
| 工具参数Toolparameters | |
| 压接能力Crimping capacity | 0.5-1.5,1.5-2.5,4.0-6.0mm2 |
| 美国标准AWG | 20-10AWG |
| 长度Length | 230mm |
| 重量Weight | 0.6Kg |
迷你型欧式端子压接钳
.com 21
4设i计lwww.jrcis.com Λ
SN-02C预绝缘端子 SN-02CInsulatedterminal
Mini European Style Crimping Plier
技人品
| 工具参数Toolparameters | |
| 压接能力Crimping capacity | 0.25-2.5mm² |
| 美国标准AWG | 24-4AWG |
| 长度Length | 190mm |
| 重量Weight | 0.37Kg |
| 工具参数Toolparameters | |
| 压接能力Crimping capacity | 0.08-0.25,0.25-0.5,0.75-1.5mm² |
| 美国标准AWG | 28-16AWG |
| 长度Length | 190mm |
| 重量Weight | 0.37Kg |
| 工具参数Toolparameters | |
| 压接能力Crimping capacity | 支人品牌设9.5-2.5mm2Ww62733.com |
| 美国标准AWG | 22-14AWG 17-62733721 |
| 长度Length | 190mm |
| 重量Weight | 0.37Kg |
川
| 工具参数Toolparameters | |
| 压接能力Crimping capacity | 0.5-2.5mm² |
| 美国标准AWG | 22-14AWG |
| 长度Length | 190mm |
| 重量Weight | 0.37Kg |
管型预绝缘端头（E型）
Insulated Cord End Terminal/Ferrule (EType)
| 型号 Item No. | 尺寸Dimension(mm) | 颜色Color | |||||||
| F | L | W | D | Cg | A.W.G | Wirenge mm² | 德国颜色 Germany Color | 法国颜色 France Color | |
| E0306 | 6.0 | 10 | |||||||
| E0308 | 8.0 | 12 | 1.9 | 1.1 | 0.8 | #24 | 0.3 | Lgnt bu | 粉色Pink |
| E0310 | 10.0 | 13.8 | |||||||
| E0506 | 6.0 | 12.0 | |||||||
| E 0508 | 8.0 | 14.0 | 2.6 | 1.3 | 1.0 | #22 | 0.5 | 橙色Orange | 白色White |
| E0510 | 10.0 | 16.0 | |||||||
| E0512 | 12.0 | 18.0 | |||||||
| E7506 | 6.0 | 12.3 | |||||||
| E7508 | 8.0 | 14.3 | 2.8支1.5 | 1.2 | #20 | 0.75 | 白色White | 蓝色Blue | |
| E7510 | 10.0 | 16.3 | |||||||
| E7512 | 12.0 | 18.3 | |||||||
| E1006 | 6.0 | 12.3 | 黄色Yellow | ||||||
| E 1008 | 8.0 | 14.3 | 3 | 1.7 | 1.4 | #18 | 1.0 | 红色Red | |
| E1010 | 10.0 | 16.3 | |||||||
| E 1012 | 12.0 | 18.3 | |||||||
| E1508 | 8.0 | 14.3 | |||||||
| E 1510 | 10.0 | 16.3 | 3.5 | 2.0 | 1.7 | #16 | 1.5 | 红色Red | 黑色Black |
| E 1512 | 12.0 | 18.3 | |||||||
| E 1518 | 18.0 | 24.3 | |||||||
| E2508 E2510 | 8.0 | 15.4 17.4 | 蓝色Blue | ||||||
| E2512 | 10.0 | 18.4 | 4 | 2.6 | 2.3 | #14 | 2.5 | 灰色Gray | |
| E25180 | 12.0 18.0 | 25.1 | |||||||
| E4009 | 9.0 | 16.4 | |||||||
| E4012 | 12.0 | 19.4 | 4.5 | 3.2 | 2.8 | #12 | 4.0 | 灰色Gray | 橙色Orange |
| E4018 | 18.0 | 25.4 | |||||||
管型预绝缘端头（E型）
Insulated Cord End Terminal/Ferrule (EType)
| 型号 | RawMaterial:P.P.+Copper | ||||||||
| F | L | W | DO | A.W.G | W适用线视 mm² | 德国颜色 Germany | 法国颜色 France | ||
| E6010 | 10.0 | 19.5 | Color | Color | |||||
| E 6012 | 12.0 | 20.5 | 6.0 | 3.9 | 3.5 | #10 | 6.0 | 黑色Black | 绿色Green |
| E 6018 | 18.0 | 20.5 | |||||||
| E 10-12 | 12.0 | 22 | 7.5 | 4.9 | 4.5 | 10.0 | 乳白色lvory | 棕色Brown | |
| E 10-18 | 18.0 | 26 | #8 | ||||||
| E 16-12 | 12.0 | 22 | 8.7 | 6.2 | 5.8 | #6 | 16.0 | 绿色Green | 乳白色lvory |
| E 16-18 | 18.0 | 28 | |||||||
| E 25-16 | 16.0 | 28.0 | 11.0 | 7.9 | 7.5 | #4 | 技人品牌设计 25.0 | 棕色Brown | 黑色Black |
| E25-22 | 22.0 | 34.0 | |||||||
| E 35-16 | 16.0 | 30.0 | 12.5 | 8.7 | 8.3 | #2 | 35.0 | 乳白色lvory | 红色Red |
| E35-25 | 25.0 | 39.0 | |||||||
| E50-20 | 20.0 | 37 | 16 | 10.9 | 10.3 | 1/0 | 50.0 | 橄榄色Olive | 蓝色Blue |
| E 50-25 E70-20 | 25.0 | 42 37 | |||||||
| E70-25 | 20.0 | 42 | 16 | 14.3 | 13.5 | 2/0 | 70.0 | 黄色Yellow | 黄色Yellow |
| E95-25 | 25.0 25.0 | 44.0 | |||||||
| E 95-32 | 32.0 | 51.0 | 18.5 | 16 | 14.5 | 3/0 | 95.0 | 红色Red | 红色Red |
| E 120-27 | 27.0 | 47.6 | |||||||
| E120-32 | 32.0 | 52.6 | 20.3 | 17.5 | 16.5 | 4/0 | 120.0 | 蓝色Blue | 蓝色Blue |
| E 150-27 | 27.0 | 52.6 | |||||||
| E 150-32 | 32.0 | 57.6 | 23.4 | 20.6 | 19.6 | 250/300 | 150.0 | 黄色Yellow | 黄色Yellow |
双线管型预绝缘端头（TE型）
Crewel Insulated Cord End Terminal (TE Type)
| 型号 Item No. | 材质：P.P.+索铜 | |||||||||||
| 尺寸Dimension(mm) | do | Wi用线ge | 颜色Color 德国颜色 | |||||||||
| TE0508 | F 8.0 | L 14.5 | W 5.0 | C 2.1 | B 6.5 | D8 1.8 | A.W.G 2×22 | mm² 2×0.5 | Germany Color 橙色Orange | 法国颜色 France Color 白色White | ||
| TE 7508 | 8.0 | 14.5 | 5.5 | 2.6 | 6.7 | 2.1 | 1.5 1.8 | 2×20 2×0.75 | 白色White | 蓝色Blue | ||
| TE 7510 | 10.0 | 16.7 | 5.5 | 2.6 6.7 | 2.1 | 1.8 | ||||||
| TE 1008 | 8.0 | 15.1 | 5.5 | 2.9 | 7.1 | 2.3 | 2.0 | 2x18 2x1.0 | 黄色Yellow 红色Red | |||
| TE 1010 | 10.0 | 17.1 | 5.5 | 2.9 | 7.1 | 2.3 | 2.0 | 品牌设 | ||||
| TE 1508 | 8.0 | 15.5 | 6.4 | 3.1 | 技 7.2 | 人 2.6 | 2.3 | 2 x 1.5 | 红色Red 黑色Black | |||
| TE 1510 | 10.0 | 18.0 | 6.4 | 3.1 | 7.2 | 2.6 | 2.3 | 2x16 | ||||
| TE 1512 | 12.0 | 20.0 | 6.4 | 3.1 | 7.2 | 2.6 | 2.3 | 蓝色Blue 灰色Gray | ||||
| TE2508 | 8.0 | 17.3 18.5 | 8 | 3.5 | 8.5 | 3.3 | 2.9 | 2x14 2x2.5 | ||||
| TE2510 TE 2512 | 10.0 12.0 | 21.5 | 8 8 | 3.5 3.5 | 8.5 8.5 | 3.3 3.3 | 2.9 2.9 | 2×4 | ||||
| TE 4012 | 12.0 | 23.1 | 8.8 | 4.6 | 11.1 | 4.2 | 3.8 | 2x12 | 灰色Gray | 橙色Orange | ||
| TE 6014 | 14.0 | 26.1 | 9.5 | 6.0 | 12.1 | 5.3 | 4.9 | 2×10 | 2×6 | 黑色Black | 绿色Green | |
| CCIS TE 10-14 | m | 14.0 26.6 | 12.6 | 7.3 | 12.6 | 6.9 | 6.5 | 2×8 | 2×10 | 乳白色lvory | 棕色Brown | |
| 2×16 | ||||||||||||
| TE 16-14 | 14.0 | 31.3 | 19.0 | 9.1 | 17.3 | 8.7 | 8.3 | 2x6 | 绿色Green | 乳白色lvory |
| 材料：紫铜 镀层：银 | ③Material: Copper Plating:Silver | 技人 | |||||
| 型号 Item No. | 尺寸Dimension(mm) | ||||||
| L | D | CQ | W | A.W.G | |||
| 6.0 | |||||||
| EN0308 | 8.0 | 11 | 0.8 | 1.4 | #24 | 0.3 | |
| EN0310 | 10.0 | ||||||
| EN 0506 | 6.0 | ||||||
| EN0508 | 8.0 | ||||||
| EN0510 | 10.0 | ||||||
| EN 0512 | 12.0 | ||||||
| EN7506 | 6.0 | ||||||
| EN7508 | 8.0 | ||||||
| EN7510 | 10.0 | 1.5 1.2 技人品牌设计 | 1.9 | #20 | www.jrcis.com 0577-62733721 | ||
| EN 7512 | 12.0 | ||||||
| EN 1006 | 6.0 | ||||||
| EN 1008 | 8.0 | 1.4 | 2.2 | ||||
| EN 1010 | 10.0 | ||||||
| EN 1012 | 12.0 | ||||||
| EN 1507 | 7.0 | 2.0 | 2.5 | 1.5 | |||
| EN 1508 | 8.0 | #16 | |||||
| EN 1510 | 10.0 | ||||||
| EN1512 | 12.0 | ||||||
| EN1518 | 18.0 | ||||||
| EN2507 | 7.0 | ||||||
| EN2508 | 8.0 | ||||||
| EN2510 | 10.0 | ||||||
| EN2512 | 12.0 | ||||||
| EN2518 | 18.0 | ||||||
| EN4009 | 9.0 | ||||||
| EN 4012 | 12.0 | ||||||
| EN4018 | 18.0 | ||||||
| 材料：紫铜 镀层：银 | ③Material: Copper Plating: Silver | |||||
| 型号 ItemNo. | 尺寸Dimension(mm) | 适用线规Wire Range | ||||
| L | DQ | Cg | W | A.W.G | mm² | |
| EN 6010 | 10.0 | |||||
| EN 6012 | 12.0 | |||||
| EN 6015 | 15.0 | |||||
| EN 6018 | 18.0 | |||||
| 12.0 | 4.9 | 4.5 | 5.8 | |||
| EN 10-12 | ||||||
| EN 10-15 | 15.0 | |||||
| EN 10-18 | 18.0 | |||||
| EN 16-12 | 12.0 | 授人品牌设计 | #5/ww.jrci6.0com | |||
| EN 16-15 | 15.0 | |||||
| EN 16-18 | 18.0 | |||||
| EN 25-16 | 16.0 | 7.9 | 7.5 | 9.1 | #4 | |
| EN25-22 | 22.0 | |||||
| EN 35-16 | 16.0 | 8.7 | 8.3 | 10.2 | #2 | |
| EN35-25 | 25.0 | |||||
| EN50-20 | 20.0 | 10.9 | 10.3 | 12.7 | #1 | |
| EN50-25 | 25.0 | |||||
| EN70-20 | 20.0 | 14.3 | 13.5 | 15.8 | #2/0 | |
| EN70-25 | 25.0 | |||||
| EN 95-25 | 25.0 | 15.6 | 14.8 | 17.3 | #3/0 | |
| EN 95-32 | 32.0 | |||||
| EN120-30 | 30.0 | 17.7 | 16.7 | 20 | #4/0 | |
| EN 120-32 | 32.0 | |||||
| EN 150-27 | 27.0 | 20.6 | 19.6 | 23 | #250/300 | 150.0 |
| EN 150-32 | 32.0 | |||||
迷你型自调式压接钳
Mini-Type Self-Adjustable Crimping Plier
套管式专用钳（压后呈正四边形）
Tubular Special Pliers (Regular quadrilateral after pressing)
{ \scriptsize { 1 } } 用于绝缘的和非绝缘的套管式端子；
⊚ 均匀钳压，保证了精准的压线外型；
⊚ 方形压接套管式端子确保最佳的接触面钳压；
{ \scriptsize { 1 } } 按照端子的要求横截面积自动调节，方便操作；
⑨ 优良的杠杆传动，使得操作更省力；
{ \scriptsize { 1 } } 受力闭锁装置（可释放），确保精确、密封的压接，符合DIN标准；
{ \scriptsize { 1 } } 操作简便，结构紧凑；
⊚ 所有必要的部件采用特种钢经特殊淬火处理。
⊚ For insulated and non-insulated ferrule terminals;
{ \scriptsize { 1 } } Uniform crimping ensures a precise crimp shape;
{ \scriptsize { 1 } } Square crimp ferrule terminals guarantee optimal contact surface crimping;
{ \scriptsize { 1 } } Automaticallyadjustsaccording to the required cross-sectional area of the terminal for easy operation;
{ \scriptsize { 1 } } Excellent lever transmission makes operation more labor-saving;
{ \scriptsize { 1 } } Force-locking device (releasable) ensures preciseand sealed crimping,compliant with DINstandards;
⑨ Easy to operate with a compact structure;
⑨ All necessary componentsare made of special steel with special quenching treatment.
可选配双色手柄
（双色手柄采用双重材料制成，防滑，手感更好）。
Anoptional two-color handle isavailable
技人品
入
(The two-color handle is made of double materials,which isanti-slip and hasabetter feel.)
| 工具参数Toolparameters | HSC86-4/HSC86-4A | HSC810S |
| 压接能力 Crimping capacity | 技 0.25-6.0mm2卑设计 | 0.14-10mm²cis.com |
| 美国标准AWG | 23-10AWG | ZT 25-7AWG |
| 长度Length | 175mm | 175mm |
| 重量Weight | 175mm | 0.36Kg |
迷你型自调式压接钳
Mini-Type Self-Adjustable Crimping Plier
HSC86-6套管式专用钳（压后呈正六边形） HSC86-6TubularSpecial Pliers (Regularhexagonafterpressing)
⊚ 端子侧向进入压接钳
⊚ 自调节适用于要求的套管式端子尺寸，不会因为使用了不匹配的压模而错误压接
⊚ 适合于应用范围内所有的套管及双套管式端子
{ \scriptsize { 1 } } 优质铬钒电工钢，油淬处理
⊚ Ferrule insertion on the sideof the tool
{ \scriptsize { 1 } } Self-adjustingadaptationtothe desired end sleeve (ferule) size.no wrong crimpscaused byusing the wrong die
{ \scriptsize { 1 } } Fitsall ferrules within the application range
⑨ Chrome vanadium electric steel in special quality, oil-hardened
可选配双色手柄
（双色手柄采用双重材料制成，防滑，手感更好）。
Anoptionaltwo-colorhandleisavailable
(The two-color handle is made of double materials,which isanti-slipand hasa better feel.)
| 工具参数Toolparameters | |
| 压接能力Crimping capacity | 0.25-6.0mm² |
| 美国标准AWG | 23-10AWG |
| 长度Length | 175mm |
| 重量Weight | 0.36Kg |
四方压接提供更好的接触。六方压接非常接近于圆形。使用这两种压接的形状，解决了通常难处理的端子插入问题。Four-sidedcrimping_providesbettercontact.Thehexagonalcrimping isveryclosetoa_circle.Byusingthese two crimping shapes,the usually difficult-to-handle terminal insertionproblem hasbeen solved.
HSC816-4套管式专用钳（压后呈正四边形）
HSC816-4Tubular SpecialPliers (Reqularquadrilateral afterpressing)
{ \scriptsize { 1 } } 用于非焊接的，符合标准的电气连接，适合管状裸端子及管状预绝缘端子。{ \scriptsize { 1 } } 压接时只要将端子侧向进入压接钳，根据端子所要求的挤压力度达到时，强制制动装置才会使压接钳口自动松开，保证在反复压线时能保持较高质量的压线标准。
⑨ Itisapplicable for tubularbare terminalsand pre-insulated terminalon non-welding connection complied with standard electrical connection.
③Thus high quality crimping standard can be ensured after crimping repeatedly.
| 工具参数Toolparameters | |
| 压接能力 Crimping capacity | 4-16mm2 |
| 美国标准AWG | 12-6AWG |
| 长度Length | 210mm |
| 重量Weight | 0.52Kg |
端子材料：紫铜 ③Terminal body: Copper
| 端子材料：累铜 镀层：锡 | Terminatboay:Copper Plating: Tin | ||||||||
| ItmNo. | W | ||||||||
| RNB 1.25-3 | #4 | 3.2 | 5.7 | 12.6 4.9 | d | ||||
| RNB 1.25-3.5S | #6 | 3.7 | 5.7 12.6 | 4.9 | |||||
| RNB 1.25-4S | #8 | 4.3 | 6.6 14.4 | 6.3 | |||||
| RNB 1.25-4L | #8 | 4.3 | 8.0 15.8 | 7.0 | |||||
| #10 | 5.3 | 8.0 15.8 | 7.0 | ||||||
| RNB 1.25-5S RNB 1.25-5L | 0.5-15 | 0.75 | 19A | #10 | 5.3 | 9.8 17.6 | 7.6 | 4.8 3.4 1.7 | |
| RNB 1.25-6S | 1/4 | 6.4 | 9.8 17.6 | 7.6 | |||||
| RNB 1.25-6L | 1/4 | 6.4 | 11.621.8 | 11.1 | |||||
| RNB 1.25-8 | 5/16 | 8.4 | 11.621.8 | 11.1 | |||||
| RNB 1.25-10 | 3/8 | 10.5 | 13.625.5 | 13.9 | |||||
| RNB 1.25-12 | 技人品 | 13.0 | 19.230.5 | 16.5 | w.jrcis.com | ||||
| #4 | 3.2 | 6.6 | 13.04.3 | ||||||
| RNB 2-3 | #6 | 6.6 | 13.0 | 4.7 | |||||
| RNB2-3.5S | 3.7 4.3 | 6.6 | |||||||
| RNB2-4S | #8 | #8 | 8.5 | 14.5 | 6.5 7.7 | ||||
| RNB2-4L | 0.8 | 4.3 | 16.8 | 4.8 4.1 2.3 | |||||
| RNB2-5S | 27A | #10 5.3 | 8.5 | 16.8 7.7 | |||||
| RNB2-5L | #10 | 5.3 | 9.516.8 | 7.0 | |||||
| RNB2-8 | 5/16 | 8.4 | 12.021.811.0 | ||||||
| RNB2-10 | 3/8 | 10.5 | 14.625.513.0 | ||||||
| RNB 2-12 | 25-420 1.0 | 37A | 1/2 | 13.0 | 19.230.415.5 | 6.0 5.0 3.0 | |||
| RNB 3.5-4 | #8 | 4.3 | 8.018.0 | 7.7 | |||||
| RNB35 | 14 | 54 | 120 240 | 73 | |||||
| 5/16 | 8.4 | 15.0 27.5 | 14 | ||||||
| RNB 3.5-8 RNB5.5-4S | #8 4.3 | 7.2 | 16.25.9 | ||||||
| RNB 5.5-4L | #8 4.3 | 9.5 | 19.8 | 8.3 | |||||
| RNB5.5-5 | 1.0 | 48A | #10 5.3 | 9.5 | 19.8 | 8.3 6.8 | |||
| RNB5.5-6 | 400-60 | 1/4 | 6.4 | 12.023.511.0 | |||||
| RNB 5.5-8 | 5/16 | 8.4 | 15.028.0 | 13.7 | |||||
| RNB5.5-10 | 3/8 | 10.5 | 15.028.0 | 13.7 | |||||
| RNB 5.5-12 | 1/2 | 13.0 | 19.232.416.0 | ||||||
| 镀层：锡 | |||||||||
| ItemNo. | T | uent | |||||||
| RNB8-4 | #8 | 4.3 | W | d | |||||
| RNB 8-5S | #10 | 8.8 23.8 11.0 23.8 11.3 | 7.2 | ||||||
| 5.3 | 8.8 | ||||||||
| RNB8-5M | #10 | 5.3 | 12.0 23.8 | 9.3 | |||||
| RNB8-6S | 6.0-10 | 62A | 1/4 | 6.4 | 12.0 23.8 | 9.3 | |||
| RNB8-6L | 1/4 | 6.4 | 15.0 29.8 14.0 | ||||||
| RNB8-8 | 5/16 | 8.4 | 15.0 29.8 | 13.8 | |||||
| RNB 8-10 | 3/8 #8 | 10.5 | 15.0 29.8 13.8 | ||||||
| RNB 14-4 | 技人品 | #10 | 4.3 | 12.029.8 13.3 | |||||
| RNB 14-5 | 5.3 | 12.029.813.3 | w.jrcis.com | ||||||
| RNB 14-6S | 1/4 | 6.4 6.4 | 12.029.813.3 | 9.0 | |||||
| RNB 14-6L | 16.032.8 14.3 | ||||||||
| RNB 14-8 | 5/16 | 8.4 10.5 | 16.0 32.814.3 | ||||||
| RNB 14-10 | 3/8 | 16.032.8 14.5 | |||||||
| RNB 14-12 | 1/2 1/4 | 13.0 6.4 | 22.041.019.5 | ||||||
| RNB 22-6S | 12.2 33.2 15.0 | ||||||||
| RNB 22-6L | 16-25 | 1.7 | 1/4 6.4 | 16.5 33.714.0 | 12.011.68.2 | ||||
| RNB 22-8 | 115A | 5/16 | 8.4 | 16.533.7 13.5 | |||||
| RNB 22-10 | 3/8 | 10.5 | 16.533.7 13.5 | ||||||
| RNB 22-12 | 1/2 | 13.0 | 22.0 42.5 19.5 | ||||||
| RNB 38-6 | 25~35 (2) | 1.8 | 1/4 | 6.4 | 15.339.0 | 18.0 | |||
| RNB 38-6L | 1/4 | 6.4 | 22.042.7 17.7 | ||||||
| RNB 38-8S | 5/16 | 8.4 | 15.339.0 18.0 | ||||||
| RNB.38-8L | 160A | 5/16 | 8.4 | 22.042.7 | |||||
| RNB 38-10S | 10.5 | 15.339.0 18.0 | |||||||
| RNB38-10L | 3/8 | 10.5 | 22.042.7 17.7 | ||||||
| RNB 38-12 | 1/2 | 13.0 | 22.0 42.7 | 17.7 | |||||
| 端子材料：紫铜 镀层：锡 | ③Terminal body: Copper Plating: Tin | 技人 | |||||||||
| ItmNo. | 电 | ||||||||||
| RNB60-6 | 1/4 | 6.4 | W | do | |||||||
| 5/16 | |||||||||||
| RNB60-8 | 35-50 | 1.8 | 215A | 8.4 | 22.049.720.718.015.412.0 | ||||||
| RNB 60-10 | 3/8 | 10.5 | |||||||||
| RNB 60-12 | 1/2 13.0 | ||||||||||
| RNB 70-6 | 50~70 | 2.0 | 1/4 | 6.4 | 24510207.0 | ||||||
| RNB 70-8 | 支235A | 5/16 | 8.4 | ||||||||
| RNB 70-10 | 3/8 | 10.5 | |||||||||
| RNB 70-12 | 1/2 | 13.0 | |||||||||
| RNB80-6 | 70-95 2.6 | 1/4 | 28.5 55.6 22.0 21.0 22.517.0 | ||||||||
| 5/16 | 6.4 | ||||||||||
| RNB80-8 | 255A | 8.4 | |||||||||
| RNB80-10 | 3/8 | 10.5 | |||||||||
| RNB 80-12 | 1/2 13.0 | 21.022.517.0 | |||||||||
| RNB 100-6 | 1/4 | 6.4 | |||||||||
| RNB 100-8 | 2.6 | 5/16 | 8.4 | 28.555.622.0 | |||||||
| RNB 100-10 | 95-120 | 300A 3/8 | 10.5 | ||||||||
| RNB 100-12 | RNB 100-14 | 1/2 9/16 | 13.0 15.0 | 32.069.032.0 | |||||||
| nsulatedRingTerminal(RNBType) 端子材料：紫铜 镀层：锡 | ③Terminal body: Copper Plating: Tin | 技人 | |||||||||
| ItmNo. | W | T | |||||||||
| RNB 150-8 | Size 5/16 | d2(mm) 8.4 | W | dg | |||||||
| RNB150-10 | 3/8 | 10.5 | |||||||||
| RNB 150-12 | 120~150 (250/300) | 3.2 | 395A | 1/2 | 13.0 | 36.566.023.027.027.020.0 | |||||
| RNB 150-14 | 9/16 | 15.0 | |||||||||
| RNB 150-16 | 5/8 | 17.0 | |||||||||
| 技入品 | 5/16 | 8.4 | 0577-62733721 | ||||||||
| RNB180-8 | |||||||||||
| RNB 180-10 | 3.5 | 3/8 | 10.5 | 38.569.023.528.528.621.0 | |||||||
| RNB 180-12 | (150-15) | 440A | 1/2 | 13.0 | |||||||
| RNB 180-14 | 9/16 | 15.0 | |||||||||
| RNB 180-16 | 5/8 | 17.0 | |||||||||
| RNB200-8 | 5/16 | 8.4 | |||||||||
| RNB200-10 | 3/8 | 10.5 | |||||||||
| RNB 200-12 | 185~240 (400/500) | 4.0 | 470A | 1/2 | 13.0 | 44.078.024.531.532.624.0 | |||||
| jrcis.com 2733721 | |||||||||||
| RNB 200-14 | 9/16 | 15.0 | |||||||||
| RNB 200-16 | 5/8 | 17.0 | |||||||||
| 端子材料：紫铜 镀层：锡 | ③Terminal Body: Copper Plating: Tin | ||||||||||
| ItemNo. | |||||||||||
| #4 | 3.2 | W 5.7 16.0 | 6.5 | ||||||||
| SNB 1.25-3 SNB 1.25-3.5S | #6 | 3.7 | 5.7 16.0 | 6.5 | 3.4 1.7 | ||||||
| 0.75 | #8 | 4.3 | 6.2 | ||||||||
| SNB 1.25-4S | 025-15 | 19A | #8 | 6.4 | 16.0 | 6.5 5.0 | |||||
| SNB 1.25-4M | #8 | 4.3 4.3 | 7.2 8.1 | 16.0 16.0 | 6.5 | ||||||
| SNB 1.25-4L | #10 | 5.3 | 8.1 16.0 | 6.2 | |||||||
| SNB 1.25-5S | 1/4 | 6.4 | 9.5 | 16.0 6.5 | |||||||
| SNB 1.25-6S | #4 | 3.2 | 5.716.0 | 6.5 | |||||||
| SNB 2-3 SNB 2-3.5S | #8 | #6 3.7 | |||||||||
| 1.5~2.5 (16~14) 0.8 | 27A | 5.7 | 16.06.5 | w.jrcis.com 4.1 2.3 | |||||||
| SNB 2-4S | 支 | 4.3 | 6.416.06.0 | ||||||||
| SNB 2-4M | #8 | 4.3 | 7.2 | 16.06.5 5.0 | |||||||
| SNB 2-4L | #8 | 4.3 | 8.1 | 16.06.0 | |||||||
| SNB 2-5S | #10 | 5.3 8.1 | 16.0 | 6.5 | |||||||
| SNB 2-6S | 1/4 6.4 | 9.5 | 16.0 | 6.5 | |||||||
| SNB 3.5-4 | 1.0 | 37A | #8 | 4.3 | 8.0 | 18.3 7.0 | 6.0 | 5.0 3.0 | |||
| SNB 3.5-5 | 2.5-420 | 1.0 | #10 | 5.3 8.0 | 18.3 | 7.0 | |||||
| SNB 3.5-6 | 1/4 | 6.4 | 12.0 21.5 | 8.7 | |||||||
| SNB 5.5-4S | #8 | 4.3 | 8.3 | 19.5 7.5 | |||||||
| SNB 5.5-4L | #8 | 4.3 9.0 | 19.5 | 7.5 | |||||||
| SNB 5.5-5 | 4.0-60 | 48A | #10 | 5.3 | 9.0 | 19.5 7.5 | 7.0 5.6 | ||||
| SNB 5.5-6S | 1/4 | 6.4 9.0 | 19.5 | 7.5 | |||||||
| SNB 5.5-8 | 5/16 | 8.4 | 14.024.511.5 | ||||||||
| SNB 8-4 | #8 4.3 | 8 | 23.0 8.2 | ||||||||
| SNB 8-5 | 6~10 (8） | 62A | #10 | 5.3 | 11.0 | 23 8.0 | 8.5 | 7.2 4.5 | |||
| SNB 8-6 | 1.2 | 1/4 | 6.4 | 12.0 | 23 9.6 | ||||||
| com SNB8-8 | 5/16 | 8.4 | 14.5 28.0 11.4 | ||||||||
| SNB 14-6 | 1/4 | 6.4 | 12.0 28.5 10.3 | ||||||||
| 10-16 | 1.4 | 88A | 5/16 | 8.4 | 13.7 28.5 10.010.5 | 9.0 5.8 | |||||
| SNB 14-8 SNB 22-8 | 16~25(4) | 1.7 | 115A | 5/16 | 8.4 | 14.0 34.5 | 9.0 | 12.0 11.5 | 7.7 | ||
无绝缘护套片形端子（DBN型）（适用于软线）Non-lnsulated Blade Terminal (DBNType)(Apply In Flexible Wire)
| ③端子材料：紫铜 ③Terminal Body: Copper JX 镀层：锡 ③ Plating: Tin | |||||||||
| It型o. | WreRag | Ma Curent | R寸 Dimesim | d | |||||
| W | L | ||||||||
| DBN 1.25-10 | 0.5-15 | 0.75 | 19A | 2.3 | 15.0 | 10.0 | 5.0 | 3.4 | 1.7 |
| DBN 1.25-14 | 2.3 | 19.0 | 14.0 | ||||||
| DBN 1.25-18 | 2.2 | 23.0 | 18.0 | ||||||
| DBN2-10 | 4.0-600 | 1.0 | 48A | 2.8 | 15.0 | 10.0 | 5.0 | 4.0 | 2.5 |
| DBN2-14 | 4.5 | 19.0 14.0 | |||||||
| DBN2-18 | 4.5 | 23.0 18.0 | |||||||
| DBN 5.5-10 | 4.0-6.0 (12-10) | 1.0 | 3.0 | 17 | 10 | 7.0 | 5.5 | ||
| DBN5.5-14 | 4.5 | 21 | 14 | ||||||
| DBN5.5-18 | 技人品 4.5 | 2518 | www.jrcis.com 057 | ||||||
| DBN8-14 | 6~10(8) | 1.2 | 62A | 5.0 | 22.5 | 14.0 | 8.5 | 7.0 | 5.0 |
| DBN 14-16 | 10~16(6) | 1.4 | 88A | 6.0 | 30.6 | 16.0 | 1.1 | 9.0 | 6.2 |
无绝缘护套针形端子（PTN型）（适用于软线）
Non-lnsulated Pin Terminal (PTNType)(Apply In Flexible Wire)
| 端子材料：紫铜 镀层：锡 | ③Terminal Body:Copper Plating: Tin | ||||||||
| 型号 ItemNo. | 导线截面 WireRange | 材料厚度 Thickness (mm) | 最大电流 MaxCurrent | 尺寸Dimension(mm) | |||||
| W | L | E | F | DO | d | ||||
| PTN 1.25-10 | 0.5-15 | 0.75 | 19A | 1.9 | 15.0 | 4.8 | 10.0 | 3.4 | 1.7 |
| PTN 1.25-12 | 1.9 | 17.0 | 4.8 | 12.0 | |||||
| PTN2-10 | 1.5~2.5 (16~14) | 0.8 | 27A | 1.9 | 15.0 | 4.8 | 10.0 | 4.1 | 2.3 |
| PTN2-12 | 1.9 | 17.3 | 4.8 | 12.0 | |||||
| PTN3.5-10 | 2.5-420 | 1.0 | 37A | 2.8 | 14.8 | 6.0 | 10.0 | 5.0 | 3.0 |
| PTN 3.5-12 | 2.8 | 19.8 | 6.0 | 13.0 | |||||
| PTN5.5-13 | 4.06-6.0 | 1.0 | 48A | 2.8 | 20 | 7.0 | 13 | 5.5 | 3.5 |
| PTN5.5-18 | 2.8 | 25 | 7.0 | 18 | |||||
| 材质：紫铜 镀层：锡 | ③Material: Copper Plating: Tin | ||||
| 型号 ItemNo. | 尺寸Dimension (mm) | 接线范围Wire Range | |||
| dg | DD | L | A.W.G | mm² | |
| BN 1.25 | 1.7 | 3.3 | 15.0 | 22-16 | 0.5-1.5 |
| BN2 | 2.3 | 3.9 | 15.0 | 16-14 | 1.5-2.5 |
| BN3.5 | 3.0 | 5.0 | 15.0 | 14-12 | 2.5-4 |
| BN5.5 | 3.4 | 5.4 | 15.0 | 12-10 | 4-6 |
| BN8 | 4.6 | 7.0 | 21.0 | 8 | 6-10 |
| BN 14 | 5.9 | 8.9 | 26.0 | 6 | 10-16 |
| BN22 | 7.8 | 11.3 | 29.0 | 4 田i | 16-25 www. .com |
| BN 38 | 9.5 | 13.2 | 32.0 | 2 | 25-35 |
| BN60 | 11.4 | 15.3 | 36.0 | 1/0 | 35-50 |
| BN70 | 13.3 | 17.5 | 37.0 | 2/0 | 50-70 |
| BN80 | 14.5 | 19.5 | 38.0 | 3/0 | 70-95 |
| BN 100 | 16.4 | 22.1 | 38.0 | 4/0 | 95-120 |
| BN 150 | 19.5 | 26.4 | 54.0 | 250/300MCM | 150 |
| BN 180 | 21.0 | 28.5 | 57.0 | 300/350MCM | 185 |
| BN200 | 24.0 | 32.4 | 63.0 | 400/500MCM | 240 |
| BN325 | 28.0 | 37.0 | 72.0 | 500/600MCM | 300 |
| CPNY-1.25 | 1.7 | 3.3 | 8.0 | 22-16 | 0.5-1.5 |
| PNT2 | 2.3 | 4.0 | 8.0 | 16-14 | 1.5-2.5 |
| PNT 5.5 | 3.4 | 5.4 | 8.5 | 12-10 | 4-6 |
棘轮式端子压接钳省力型(日式) Ratchet Terminal Crimping Tool
HS-38裸端子（压后呈点式） HS-38 Non-insulated terminals (Point type)
{ \scriptsize { 1 } } 附棘轮装置，操作轻便，防锈效果好。
{ \scriptsize { 1 } } 压接寿命可达10,000次以上。
⑨ With ratchet device,convenient operationand finerust prevention.
⑨ Life time more than 10,000 times.
| 工具参数Toolparameters | |
| 压接能力Crimping capacity | 5.5-38mm² |
| 美国标准AWG | 10-2AWG |
| 长度Length | 356mm |
| 重量Weight | 0.85Kg |
| 工具参数Tool parameters | |
| 压接能力Crimping capacity | 1.5-10mm² |
| 美国标准AWG | 16-8AWG |
| 长度Length | 270mm |
| 重量Weight | 0.55Kg |
| 工具参数Toolparameters | |
| 压接能力Crimping capacity | 6-16mm2 |
| 美国标准AWG | 10-6AWG |
| 长度Length | 270mm |
| 重量Weight | 0.55Kg |
| 工具参数Toolparameters | |
| 压接能力Crimping capacity | 6-25mm² |
| 美国标准AWG | 10-4AWG |
| 长度Length | 354mm |
| 重量Weight | 0.85Kg |
HS-22裸端子（压后呈点式） HS-22Non-insulated terminals (Point type)
| 733721 工具参数Toolparameters | |
| 压接能力Crimping capacity | 5.5-25mm² |
| 美国标准AWG | 10-3AWG |
| 长度Length | 354mm |
| 重量Weight | 0.85Kg |
技人品牌设计17/.
| 材质：紫铜 镀层：锡 | ||||||||||||
| 型号 | 螺栓口直径 | 导线截面 | 尺寸Dimension(mm) | |||||||||
| ItemNo. | Screwmia. | Conuctor | D | dg | W | L1 | N1 | N | L | t1 | t | |
| SC 1.5-3 | 3.2 | 10.0 | ||||||||||
| SC 1.5-4 | 4.3 | 1.5 | 3.0 | 1.8 | 8.0 | 7.0 | 4.0 | 10.5 | 18.0 | 0.6 | 0.6 | |
| SC 1.5-5 | 5.3 4.3. | 11.0 | ||||||||||
| SC 2.5-4 | 5.3 | 2.5 | 4.0 | 2.4 | 8.0 | 7.0 | 0.8 | 0.7 | ||||
| SC 2.5-5 | 6.4 | 10.0 | 5.2 | 12.0 12.0 | 20.0 | |||||||
| SC 2.5-6 | 5.3 | 9.0 | ||||||||||
| SC 4-5 SC 4-6 | 6.4 | 4 | 4.95 | 3.5 | 10.0 | 7.5 | 4.3 | 12.0 | 21.0 | 1.0 | 0.7 | |
| SC 6-4 | 4.3 | 8.0 | 1.1 | |||||||||
| SC 6-5 | 5.3 | 技5.5 | 10.0 | 26.0 | 1.0 | |||||||
| 6.4 | 6 | 4.1 | 11.0 | 18.85.3 | 15.0 | WW 0577 | Lrcis 1.0 | 0.7m | ||||
| SC 6-6 | 8.4 | 12.0 | 27.0 | 0.9 | ||||||||
| SC 6-8 | 5.3 | 11.5 | ||||||||||
| SC 10-5 | 10 | 7.0 | 5.2 | 11.8 | 5.8 | 14.0 | 1.5 | |||||
| SC 10-6 | 6.4 | 12.8 | 9.5 | 26.5 | 0.9 | |||||||
| SC 10-8 | 8.4 | 6.8 | 14.5 | 1.2 | ||||||||
| SC 16-6 | 6.4 | 12.0 | 7.1 | 17.5 | 1.65 | |||||||
| SC 16-8 | 8.4 | 16 | 8.0 | 6.0 | 13.3 | 11.5 | 7.5 | 32.4 | 1.5 | 1.0 | ||
| SC 16.0-10 | 10.5 | 15.0 | 18.0 | 1.45 | ||||||||
| SC 16-12 | 13.0 | 18.5 | 13.0 | 8.5 | 20.0 | 38.0 | 1.0 | |||||
| SC 25-6 | 6.4 | 9.5 | 14.0 | 7.8 | 18.0 | 2.0 | ||||||
| SC 25-8 | 8.4 | 14.0 | 12.0 | 8.3 | 34.0 | 1.9 | 1.0 | |||||
| SC 25-10 | 10.5 | 25 | 7.5 | 15.7 | 18.5 | 1.6 | ||||||
| SC 25-12 | 13.0 | 9.9 | 18.0 | 13.3 | 9.5 | 22.5 | 41.0 | 1.85 | 1.2 | |||
| SC 25-14 | 15.0 | 19.0 | 10.0 | 1.7 | ||||||||
| SC.35-6 | 6.4 | 11.0 | 36.0 | |||||||||
| SC 35-8 | 8.4 | 35 | 8.4 | 16.0 | 13.5 | 8.0 | 18.5 | 2.5 | 1.3 | |||
| SC 35-10 | 10.5 | 37.0 | ||||||||||
| SC 35-12 | 13.0 | 11.4 | 18.0 | 15.0 | 10.0 | 23.0 | 44.0 | 1.5 | ||||
| 材质：紫铜 ③镀层：锡 | pp ③Material: Copper 技人 Plating: Tin | |||||||||||
| ItNo. | e | D | RDinNomm | |||||||||
| 6.4 | dg | W | t1 | |||||||||
| SC 50-6 | ||||||||||||
| SC 50-8 8.4 | 50 | 12.5 | 9.6 | 18.0 | 16.0 | 22.0 | 9.8 | 43.0 | 2.81.45 | |||
| SC 50-10 | 10.5 | |||||||||||
| W N1 | SC 50-12 | 13.0 | 12.0 | 43.0 | ||||||||
| t1 | SC 70-6 SC 70-8 | 6.4 8.4 | ||||||||||
| 10.5 | 70 | 15.0 | 22.0 | 19.5 | 24.0 | 11.0 51.0 | 3.0 | 1.5 | ||||
| SC 70-10 | 2设1 | Lwww.jrcis.com | ||||||||||
| SC 70-12 SC 95-8 | 13.0 8.4 | 0577-62733721 | ||||||||||
| SC 95-10 | 10.5 | 24.6 | 27.3 | 11.6 | ||||||||
| SC 95-12 | 13.0 | 95 | 17.2 | 13.6 | 20.0 | 55.5 3.6 | 1.8 | |||||
| SC 95-14 | 15.0 | |||||||||||
| SC 95-16 | 17.0 | 25.0 | 28.0 | 13.2 57.0 | ||||||||
| SC 120-10 | 10.5 | |||||||||||
| SC 120-14 | SC 120-12 | 13.0 | 120 | 20.0 | 16.0 | 29.0 | 23.0 | 29.0 | 13.0 | 63.0 | 3.9 | 2.0 |
| 15.0 | ||||||||||||
| SC 120-16 | 17.0 | |||||||||||
| SC 150-8 | 8.5 | |||||||||||
| 技人品牌设计 WWW | SC 150-10 | 11.0 | 21.0 16.8 | 30.0 | ||||||||
| 0577-627SC150-12 | 13.0 | 150 | 24.5 | 31.5 | 15.5 | 68.5 | 4.1 | 2.1 | ||||
| SC 150-14 SC 150-16 | 15.0 | |||||||||||
| 材质：紫铜 镀层：锡 | 拉 | ||||||||||||
| ItmNo. | R4Dinegsmim/ | ||||||||||||
| D | d | W | L | t1 | t | ||||||||
| SC 185-10 | 11.0 | ||||||||||||
| SC 185-12 | 13.0 | 185 | 23.7 18.7 | 34.5 | 30.5 | 35.5 | 17.0 | 79.0 | 5.0 | 2.5 | |||
| SC 185-14 | 15.0 | ||||||||||||
| SC 185-16 | 17.0 | ||||||||||||
| SC 240-12 | 13.0 | ||||||||||||
| SC 240-14 | 15.0 | 240 | 26.0 | 21.0 | 37.5 | 35.0 | 41.0 | 18.7 | 92.0 | 5.0 | 2.5 | ||
| SC 240-16 | 17.0 | ||||||||||||
| SC 240-18 | 19.0 | 技人 | C2qi设i+lwww.jrcis.com | 0577-62733721 | |||||||||
| SC 300-12 | 13.0 | ||||||||||||
| SC 300-14 | 15.0 | 300 | 30.7 | 23.7 | 44.0 | 41.0 | 45.7 | 21.0102.06.8 | 3.5 | ||||
| SC 300-16 | 17.0 | ||||||||||||
| SC 300-20 SC 400-12 | 21.0 13.0 | ||||||||||||
| SC 400-14 | 15.0 | 36.0 | |||||||||||
| SC 400-16 | 17.0 | 400 | 28.0 | 51.0 | 42.5 | 49.7 | 19.0 | 110.0 | 8.0 | 4.0 | |||
| SC 400-20 | 21.0 | ||||||||||||
| SC 500-14 | 15.0 | ||||||||||||
| SC 500-16 | 17.0 | 500 | 39.0 30.0 | 56.0 | 51.0 | 51.0 | 23.0 | 120.0 | 9.0 | 4.5 | |||
| SC 500-20 | 21.0 | ||||||||||||
| SC630-14 | 15.0 | ||||||||||||
| SC 630-16 | 17.0 | 630 | 45.0 35.0 | 65.0 | 56.0 | 63.0 | 27.0 | 140.0 | 10.0 | 5.0 | |||
| SC 630-20 | 21.0 | ||||||||||||
| 材质：紫铜 镀层：锡 | ③ Material: Copper Plating: Tin | ||||||
| 型号 | |||||||
| ItemNo. | L1 | B | L | T | |||
| JG 6-6 | 6.0 | 4.0 | 14.0 | 10.0 | 6.5 | 33.0 | 1.0 |
| JG 6-8 | 12.0 | 8.5 | |||||
| JG 10-6 | 11.6 | 6.5 | 2.4 | ||||
| JG 10-8 | 8.5 | ||||||
| JG 10-10 | 10.5 | ||||||
| JG 10-12 | 14.0 | 13.0 | 41.0 | 1.9 | |||
| JG 16-5 | 5.3 | ||||||
| JG 16-6 | 6.5 | ||||||
| JG 16-8 | 17.0 | 13.0 | 8.5 | ||||
| JG 16-10 | 10.5 | ||||||
| JG 16-12 | 17.0 | 13.0 46.0 | |||||
| JG 25-4 | 4.2 | ||||||
| JG25-5 | 14.0 | 5.3 | |||||
| JG25-6 | 6.5 | ||||||
| JG 25-8 | |||||||
| JG 25-10 | 7.0 | 技人品牌 15.0 | 8.5 10.5 | www.jrcis.com 45.0 62733721 48.0 | |||
| JG 25-12 | 17.0 | 13.0 | |||||
| JGX 25-4 | 4.3 | ||||||
| JGX 25-5 | 5.3 | ||||||
| JGX 25-6 | 6.5 | ||||||
| JGX 25-8 | |||||||
| JG 35-6 | 16.0 | 8.5 6.5 8.5 | 50.0 | 3.0 | |||
| JG 35-8 | |||||||
| JG 35-10 | 10.5 | ||||||
| JG 35-12 | 19.0 | 13.0 | |||||
| JGX 35-5 | 5.4 6.5 | ||||||
| JGX 35-6 | 16.0 | 47.8 | 2.9 | ||||
| JGX 35-8 | 8.5 10.5 | ||||||
| JGX 35-10 | |||||||
| JG 50-6 | 10.0 | 23.0 | 6.5 | ||||
| JG 50-8 | 18.5 | 8.5 | |||||
| JG50-10 | 10.5 | ||||||
| JG 50-12 | 18.7 | 13.0 15.0 | |||||
| JG50-14 | 22.5 | ||||||
| JG 50-16 | 17.0 6.5 | ||||||
| JG70-6m | |||||||
| JG 70-8 | 16.0 | 12.0 | |||||
| JG 70-10 JG 70-12 | 25.0 | 10.5 | |||||
| 22.5 | 13.0 | 62.0 | 3.7 | ||||
| JG 70-14 | 15.0 | ||||||
| 24.0 | |||||||
| JG 70-16 | 17.0 | ||||||
| 材质：紫铜 镀层：锡 | ③ Material: Copper Plating: Tin | 技 | ||||||
| 型号 | 尺寸Dimension(mm) | |||||||
| D | d | L1 | B | |||||
| JG 95-8 | 8.5 | |||||||
| JG 95-10 | 25.5 | 10.5 | ||||||
| JG 95-12 | 18.0 | 14.0 | 26.5 | 13.0 | ||||
| JG 95-14 | 15.0 | |||||||
| JG 95-16 | ||||||||
| JG 120-6 | ||||||||
| JG 120-8 | ||||||||
| JG 120-10 | 29.0 | |||||||
| JG 120-12 | ||||||||
| JG 120-14 | ||||||||
| JG 120-16 | 33.5 | 5.0 | ||||||
| JG 150-8 | ||||||||
| JG 150-10 | 170技人品牌 | 10.5 | www.jrcis.com 80.0 | 62733721 | ||||
| JG 150-12 | ||||||||
| JG 150-14 | 15.0 | |||||||
| JG 150-16 | 17.0 | |||||||
| JG 185-10 | 18.5 | 33.5 | 34.0 | 10.5 13.0 | ||||
| JG 185-12 | ||||||||
| JG 185-14 | 35.5 | |||||||
| JG 185-16 | ||||||||
| JG 240-8 | 17.0 8.5 | 93.0 | ||||||
| JG 240-10 | ||||||||
| JG 240-12 | ||||||||
| JG 240-14 | ||||||||
| JG 240-16 | 17.0 | 4.9 | ||||||
| JG 240-20 | ||||||||
| JG300-10 | ||||||||
| JG 300-12 | ||||||||
| JG 300-14 | 24.0 | 42.0 | 43.5 | 5.9 | ||||
| JG 300-16 JG 300-18 | ||||||||
| JG 300-20 | ||||||||
| JG 400-12 | ||||||||
| 27.0 | 48.0 | 49.5 | 13.0 | 114 | 6.9 | |||
| JG 400-14 | 34.0 | 15.0 | ||||||
| JG 400-16 | 17.0 | |||||||
| JG 400-20 | 21.0 | |||||||
C45插针裸端头
C45Insert Needle Naked Terminal
| 型号 Item No. | Materiat:Copper Plating: Tin | ||||
| 尺寸Dimension(mm) | |||||
| C45N1.5 | B | L | L1 | BD | Dd |
| C45N2 | 4.7 | 22 | 10 | 3.5 | 2.1 |
| C45N4 | 5.5 | 22 | 10 | 4 | 2.6 |
| C45N6 | 6.7 7 | 22 | 10 | 4.8 | 3.4 |
| C45N10 | 7 | 27 | 10 | 5.9 | 4 |
| C45N16 | 7 | 33 | 13 | 6.7 | 5.1 |
| C45N25 | 7 | 36 | 13 | 8.1 | 6 |
| C45N35 | 7 | 37 | 13 | 9 | 7 |
| C45N50 | 7 | 39 | 13 | 10.6 | 8.3 |
| C45N70 | 7 | 43.5 47 | 13 13 | 12.5 15 | 9.8 12 |
喇叭口铜管端头(TT型)
Flared Copper Tube End (TT Type)
| 材质：紫铜 镀层：锡 | ||||||
| 型号 Item No. | 尺寸Dimension(mm) | |||||
| Od2 | B | L | D | Dd | E | |
| TT10-6 | 6.4 | 11.9 | 28 | 6.9 | 4.7 | 12 |
| TT10-8 | 8.3 | 13.5 | 31 | |||
| TT16-6 | 6.4 | 11.9 | 33 | 7.8 | 5.6 | |
| TT16-8 | 8.3 | 13.5 | 37 | |||
| TT16-10 | 10.5 | 16 | 38 | |||
| TT25-8 | 8.3 | 14 | 39 | 9.5 | 7.1 | 18 |
| TT25-10 | 10.5 | 16 | 42 | |||
| TT35-8 | 8.3 | 16.5 | 42 | 11 | 8.2 | 19 |
| TT35-10 | 10.5 | 16.5 | 46 | |||
| TT50-10 | 10.5 | 17.9 | 51 | 12.5 | 9.5 | 22 |
| TT50-12 | 13 | 17.9 | 51 | |||
| TT70-10 | 10.5 | 22 | 54 | 15 | 11.5 | 22 |
| TT70-12 | 13 | 22 | 54 | |||
| TT95-14 | 14.5 | 24.7 | 72 | 17 | 13.5 | 27 |
| TT95-16 | 16.5 | 24.7 | 72 | |||
| TT120-14 | 14.5 | 28.9 | 74 | 20 | 15.6 | 29 |
| TT120-16 | 16.5 | 28.9 | 74 | |||
| TT150-14 | 14.5 | 30.4 | 84 | 21 | 16.5 | 38 |
| TT150-16 | 16.5 | 30.4 | 84 | |||
| TT185-16 | 16.5 | 34 | 92 | 23.6 | 18.4 | 42 45 |
| TT240-16 | 16.5 | 38.5 | 98 | |||
| 材质：紫铜 镀层：锡 | Material: Copper Plating: Tin | |||||
| 型号 Item No. | ||||||
| OD | Dd | W | B | L | ||
| T40-6 | 6.4 | 16.3 | ||||
| T40-8 | 8.3 | |||||
| T40-10 | 10.5 | |||||
| T 40-12 | 13.2 | |||||
| T50-6 | 6.4 | 9.5 | 18.0 | 20.0 | 45.0 | |
| T50-8 | 8.3 | |||||
| T50-10 | 10.5 | |||||
| T50-12 | 13.2 | |||||
| T50-14 | 14.5 16.5 | |||||
| T 50-16 | ||||||
| T50-20 | 21.0 | 14.0 | 技人品牌设计 | 28.0 | 23.0 www.jrc4Z6com | 68.0 |
| T70-8 | 8.3 | 0577-62733721 | ||||
| T70-10 | 10.5 | |||||
| T 70-12 | 13.2 | 20.0 | ||||
| T 70-14 | 14.5 | 15.0 | 11.5 | 21.5 | ||
| T 70-16 | 16.5 | |||||
| T70-20 | 21.0 | |||||
| T95-8 | 8.3 | |||||
| T 95-10 | 10.5 | 17.0 | 13.5 | 24.7 | 30.0 | |
| T 95-12 | 13.2 | |||||
| T95-14 | 14.5 | |||||
| T95-16 | 16.5 | |||||
| T 95-20 | 21.0 | |||||
| T 120-10 | 10.5 | 20.0 15.6 | ||||
| T 120-12 | 13.2 | |||||
| T 120-14 | 14.5 | |||||
| T 120-16 | 16.5 | |||||
| T120-20 | 21.0 | |||||
| r15.0-10n | 10.5 | |||||
| T 150-12 | 13.2 | |||||
| T 150-14 | 14.5 | |||||
| T 150-16 | 16.5 | |||||
| T150-20 | 21.0 | |||||
| 材质：紫铜 镀层：锡 | ③Material: Copper Plating: Tin | |||||
| 型号 Item No. | 尺寸Dimension(mm) | |||||
| DE | OD | Od | W | B | L | |
| T185-10 | 10.5 | |||||
| T 185-12 | 13.2 | |||||
| 14.5 | ||||||
| T 185-14 T185-16 | 16.5 | |||||
| T185-20 | 21.0 | |||||
| T240-10 | 10.5 | 38.5 | 37.0 | |||
| T 240-12 | 13.2 | |||||
| T 240-14 | 14.5 | |||||
| T240-16 16.5 | ||||||
| T240-20 | ||||||
| T300-10 | 10.5 | 技人品牌设计 | ww.jrcis.com | |||
| T300-12 | 13.2 | |||||
| T 300-14 | 14.5 | 28.6 | 23.4 | 41.7 | 40.0 | |
| T300-16 | 16.5 | |||||
| T300-20 | 21.0 | |||||
| T400-10 | 10.5 | 32.8 | 26.8 | 47.8 | 37.0 | |
| T 400-12 | 13.2 | |||||
| T 400-14 | 14.5 | |||||
| T 400-16 | 17.0 | |||||
| T400-20 | 21.0 | |||||
| T500-10 | 10.5 | 38.4 | 29.8 | 54.8 | 46.5 | |
| T 500-12 | 13.2 | |||||
| T500-14 | 14.5 | |||||
| T 500-16 | 16.5 | |||||
| T500-20 | 21.0 | 44.7 | 34.5 | 64.0 | 50.0 | |
| T 630-10 | 10.5 | |||||
| 27T630-12 T 630-14 | 13.2 14.5 | |||||
| T 630-16 | 16.5 | |||||
| T630-20 | 21.0 | |||||
技人品
| 材质：紫铜 镀层：锡 | ③ Material: Copper Plating: Tin | ||||||||||||
| D | |||||||||||||
| KRF10-5 | 5.3 | W | L | t1 | t | ||||||||
| KRF 10-6 | 6.4 | 10 | 7.0 | 5.0 | 11.5 | 12.0 | 14.5 | 7.0 | 30.0 | 1.6 | 1.0 | ||
| KRF 10-8 | 8.4 | 13.0 | 1.4 | ||||||||||
| KRF 16-5 | 5.3 | ||||||||||||
| KRF 16-6 | 6.4 | 13.0 | 14.0 | 16.5 | 7.5 | 34.0 | 2.7 | ||||||
| KRF 16-8 | 8.4 | 16 | 8.9 | 5.9 | 1.5 | ||||||||
| 10.5 | 16.0 | 15.0 | 19.5 | 38.0 | 2.1 | ||||||||
| KRF 16-10 | 13.0 | 20.0 | 19.0 | 22.5 | 8.0 11.0 | 45.0 | |||||||
| KRF 16-12 | 5.3 | 1.7 | |||||||||||
| KRF25-5 | 6.4 | 技人品设 | 17.018.0 | www.jrcis.com | 8.50539.062733721 | ||||||||
| KRF25-6 | 8.4 | 25 | 11.0 | 8.0 | 2.8 | 1.5 | |||||||
| KRF25-8 | 10.5 | 17.0 | 18.0 | ||||||||||
| KRF25-10 | 13.0 | 20.0 | 18.0 | 20.0 23.0 | 9.5 | 45.0 | 42 | 2.2 | |||||
| KRF 25-12 | 6.4 | 11.0 | |||||||||||
| KRF 35-6 | 8.4 | 18.0 | 22.0 | 19.0 | 9.0 | 47.0 | 3.4 | ||||||
| KRF35-8 | 35 | 12.5 | 9.0 | 1.75 | |||||||||
| KRF 35-10 | 10.5 | ||||||||||||
| KRF 35-12 | 13.0 | 20.0 | 22.0 | 22.0 | 9.0 | 49.5 | 3.0 | ||||||
| KRF 50-6 | 6.4 | ||||||||||||
| KRF 50-8 | 8.4 | 50 | 14.5 | 11.0 | 21.0 | 24.0 | 21.5 | 10.0 | 49.5 | 3.3 | 1.75 | ||
| KRF 50-10 | 10.5 | 23.0 | |||||||||||
| KRF 50-12 | 13.0 | 23.0 | 23.0 | 11.0 | 51.5 | 3.0 | |||||||
| KRF 70-8 | 8.5 | 70 | 17.0 | 24.0 | 3.9 | ||||||||
| KRF70-10 2733721 | 10.5 | 13.0 | 24.5 | 27.0 | 11.6 | 56.5 | |||||||
| KRF 70-12 | 13.0 | 2.0 | |||||||||||
| KRF 70-14 | 15.0 | 26.5 | 27.0 | 28.5 | 14.0 | 64.0 | 3.5 | ||||||
| KRF 70-16 | 17.0 | ||||||||||||
| 镀层：锡 | Plating: Tin | ||||||||||||
| Ito. | D | d | W | t1 | |||||||||
| KRF95-8 | 8.5 | L | |||||||||||
| KRF 95-10 | 10.5 | 4.9 | |||||||||||
| 20.0 | |||||||||||||
| KRF95-12 | 13.0 15.0 | 15.0 | 28.5 | 30.0 | 30.0 | 14.5 | 68.5 | 2.5 | |||||
| KRF95-14 KRF 95-16 | 17.0 | 4.7 | |||||||||||
| KRF 120-10 | 10.5 | ||||||||||||
| KRF 120-12 | 13.0 | 22.5 | |||||||||||
| KRF 120-14 | 15.0 | 120 | 16.9 | 32.0 | 31.5 | 31.0 | 15.0 | 72.5 | 5.5 | ||||
| KRF 120-16 | 17.0 | ||||||||||||
| KRF150-10 | 10.5 | ||||||||||||
| 13.0 | 技人品牌设计 150 | 25.0 | 19.0 | 35.5 | 37.0 | 31.0 | www.jrcis.com 15.0 | 80.0 5.8 | |||||
| KRF 150-12 | 15.0 | ||||||||||||
| KRF 150-14 KRF 150-16 | |||||||||||||
| 17.0 | 185 | 28.0 | 21.0 | 40.0 | 42.0 | 31.0 | 15.0 | 86.0 | 6.8 | ||||
| KRF185-10 | 10.5 | ||||||||||||
| KRF 185-12 KRF 185-14 | 13.0 15.0 | ||||||||||||
| KRF 185-16 | 17.0 | ||||||||||||
| 240 | 30.0 | 22.5 | 42.0 | 94.5 | 7.3 | ||||||||
| KRF240-10 | 10.5 | ||||||||||||
| KRF240-12 KRF 240-14 | 13.0 15.0 | ||||||||||||
| KRF240-16 KRF 300-12 | 17.0 13.0 | 300 | 33.0 | 25.0 47.0 | |||||||||
| KRF300-14 | |||||||||||||
| KRF300-16 17.0 | |||||||||||||
| KRF300-20 | 21,0 | 4.5 | |||||||||||
| 13.0 | |||||||||||||
