该页无缩略图
T
Suitable for drilling, milling and Machining, center Simple installation:Asingle installation requires onlytype screw Group to Install:Install a number of chuck plates on the plate, You can quickly replactit Soft jaw and hardened jaw can be replaced to save cost
I Unit: mm
>\*I Technical parameters
| i Order no. | BC550-KL-305 | BC550-KL-306 | BC550-KL-308 | BC550-KL-310 | BC550-KL-312 |
| Size | 305 | 306 | 308 | 310 | 312 |
| * Clamping range | 7-135 | 12-168 | 15-210 | 31-254 | 34-304 |
| * Max. clamping force [kgf] | 3650 | 5800 | 8570 | 11300 | 14650 |
| Max.ptese Mpa | 3.7(37) | 3.6(36) | 3.6(36) | 3.4(34) | 3.6(36) |
| Eff.piston area [cm2] | 46.7 | 60.4 | 98 | 128.6 | 155.3 |
| Piston stroke[mm] | 10 | 12 | 16 | 19 | 23 |
| () Jaw stroke [mm] | 5.4 | 5.5 | 7 | 8.8 | 10.6 |
| A | 1258 | 178 | 210 | 254 | 266 |
| B | 135 | 169 | 210 | 254 | 304 |
| c | 28 | 40 | 45 | 70 | 82 |
| D(H7) | 50 | 60 | 80 | 90 | |
| D1 | 140 | 160 | 190 | 230 | 246 |
see next page
- EM+t+#(5K) BC550
I Unit: mm
> \*x I Technical parameters
| E | 111 | 138 | 158 | 186 | 200 |
| F | 142 | 175 | 196 | 229 | 251 |
| G | 12 | 14 | 16 | 18 | |
| H | 62 | 73 | 95 | 100 | 130 |
| 1 | 14 | 20 | 25 | 30 | |
| Q | 5 | 6 | |||
| L | 9 | 11 | 13 | ||
| N(H7) | 10 | 12 | |||
| P | 25 | 31 | 35 | 40 | 50 |
| Weight [kg] | 12 | 20 | 34 | 56 | 80 |
| The spare parts can be ordered separately. Please inquire on demand | |||||
A
B
I Unit: mm
> I Technical parameters
| iJ** Order no. | * Type | Spindle nose | D1 | D2 | D3 | D4 | L1 |
| BC560-A205-A | A | A2-5 | 133 | 104.8 | 82.563 | 25 | |
| BC560-A206-A | A2-6 | 165 | 133.4 | 106.375 | 30 | ||
| BC560-A208-A | A2-8 | 210 | 171.4 | 106.375 | 35 | ||
| BC560-A211-A | A2-11 | 280 | 235 | 139.719 | 40 | ||
| BC560-B205-B | B | A2-5 | 133 | 104.8 | 82.563 | 115 | 30 |
| BC560-B206-B | A2-6 | 165 | 133.4 | 106.375 | 115/130/140 | 35 | |
| BC560-B208-B | A2-8 | 210 | 171.4 | 106.375 | 140/160/170 | 40 | |
| BC560-B211-B | A2-11 | 280 | 235 | 139.719 | 220 | 45 |
>3t I Naming And Coding Rules
| 01#t Type | |
| BC810 | F Static manual chuck |
| BC830 | Static hydraulic chuck |
| BM410 | Static manual mandrel base |
| BM420 | Static hydraulic mandrel base |
| 03 tt Power Menthod | |
| MS | Fah Manual |
| HS | E Hydraulic |
| 02* | ## Size | |||
| 042 | 052 | 065 | 80 | 100 |
| 3S | 2S | 15 | 00 | 01 |
| 02 | 03 | 04 | 05 | 06 |
| 07 | ||||
| 04 * Clamping Range | |||
| 003042 | 3-42mm | 004080 | 4-80mm |
| 003052 | 3-52mm | 015100 | 15-100mm |
| 003065 | 3-65mm | ||
I Unit: mm
>I Technical parameters
| Size | 42 | 52 | 65 | 80 | 100 |
| * Clamping range [mm] | 3-42 | 3-52 | 3-65 | 4-80 | 15-100 |
| Run-out s [mm] | 0.01 | ||||
| Clamping head serrated | BH210-042 | BH210-052 | BH210-065 | BH210-080 | BH210-100 |
| ** Clamping head smooth | BH220-042 | BH220-052 | BH220-065 | BH220-080 | BH220-100 |
| Max. actuating torque [Nm] | 50 | 60 | 70 | 60 | 80 |
| Radial clamping force [kgf] | 8000 | 9400 | 10500 | 11500 | 15000 |
| Axial drawtube force[pull / push] [kgf] | 3500 | 4000 | 4500 | 5000 | 6500 |
>IPlease refer to
| iJ Order no. | D1 | L1 | L2 | L3 | L4(*) | L4(*) | Weight [kg] | |
| BC810-042-RD-003042 | 0 132 f7 | 214 | 159 | 124 | 9 | 4 | 14.3 | |
| BC810-052-RD-003052 | 4 | 14 | ||||||
| BC810-065-RD-003065 | 9 | 13 | ||||||
| BC810-080-RD-004080 | 0 178 f7 | 264 | 210 | 140 | 4 | 0 | 22 | |
| BC810-100-RD-015100 | 0 | |||||||
| The spare parts can be ordered separately. Please inquire on demand | ||||||||
I Unit: mm
> #\* I Technical parameters
| Size | 42 | 52 | 65 | 80 | 100 |
| * Clamping range [mm] | 3-42 | 3-52 | 3-65 | 4-80 | 15-100 |
| Run-out [mm] | 0.01 | ||||
| Clamping head serrated | BH210-042 | BH210-052 | BH210-065 | BH210-080 | BH210-100 |
| ** Clamping head smooth. | BH220-042 | BH220-052 | BH220-065 | BH220-080 | BH220-100 |
| Max. actuating torque [Nm] | 40 | 40 | 40 | 40 | 40 |
| Radial clamping force [kgf] | 8000 | 10500 | 11500 | 15000 | |
| Axial drawtube force[pull / push] [kgf] | 3500 | 4500 | 5000 | 6500 | |
see next page
I Unit: mm I Unit: mm
>I Technical parameters
> \* I Please refer to
> \* I Please refer to
| iJ*% Order no. | D1 | D2 | L1 | L2 | L3(*) | L3(*) | Weight [kg] |
| BC830-042-RD-003042 | 0 125 f7 | LK 0 157 [8 x M8] | 154 | 120 | 9 | 4 | 12 |
| BC830-052-RD-003052 | |||||||
| BC830-065-RD-003065 | 0 145 f7 | LK 0 180 [8 x M8] | 174 | 4 9 | 15 | ||
| BC830-080-RD-004080 | 0 160 f7 | LK 0 194 [8 x M8] | 130 | 4 | |||
| BC830-100-RD-015100 | 0 180 f7 | LK 0 240 [8 x M8] | 186 229 | 140 | 0 | 0 29 | 17.5 |
| . The spare parts can be ordered separately. Please inquire on demand | |||||||
> #\* I Technical parameters
| * Size | 35-4 | 5-7 |
| Mandrel | BM120-3S/2S/1S/00/01/02/03/04 | BM120-05/06/07 |
| Axial drawtube force [pull / push] [kgf] | 3500 | 4000 |
| Max. actuating torque [Nm] | 55 | 70 |
| Order no. | M | L1 | L2 | L3 | Weight |
| BM410-MS-082 | M30 x 1,5 | 214 | 159 | 82 | 12 |
| BM410-MS-109 | 310 | 245 | 109 | 36 |
The spare parts can be ordered separately. Please inquire on demand
> i\* I Please refer to
| BM120 |
| Mandrel BM120 |
| Page 28 |
> 3t I Naming And Coding Rules
IUnit: mm
> t I Technical parameters
| Size | 35-4 | 5-7 |
| Mandrel | BM120-3S/2S/1S/00/01/02/03/04 | BM120-05/06/07 |
| $ Axial drawtube force [pull / push] [kgf] | 3500 | 4500 |
| Max. release pressure [bar] | 56 | 51 |
| Max. actuating pressure [bar] | 44 | 47 |
> I Please refer to
| i Order no. | M | D1 | Dw | L | Weight [kg] |
| BM420-HS-082 | M30 x 1,5 | 0 131 H6 | 139 | 62 | 9 |
| BM420-HS-109 | 0 219 H6 | 230 | 18 | ||
| The spare parts can be ordered separately. Please inquire on demand | |||||
>7t I Naming And Coding Rules
| 01 #a# Type | |
| BH210 | Clamping neax oughing |
| BH220 | Clamping ha inising |
| BS110 | M210 CM210 ng bushing |
| BS130 | BM120 CMa120 ng ushing |
| 03 # Profile | |
| RD | FE Round |
| 02 3Kx /*# Size | ||||
| 032 | BC220-032 | 3S | BM120-3S | |
| 042 | BC220-042 | 2S | BM120-2S | |
| 052 | BC220-052 | 15 | BM120-1S | |
| 065 | BC220-065 | 00 | BM120-00 | |
| 080 | BC220-080 | 01 | BM120-01 | |
| 100 | BC220-100 | 02 | BM120-02 | |
| 125 | BC220-125 | 03 | BM120-03 | |
| 160 | BC220-160 | 04 | BM120-04 | |
| 05 | BM120-05 | |||
| 06 | BM120-06 | |||
| 07 | BM120-07 | |||
| 04 F Number |
| 01 |
>I Technical parameters
I Unit: mm
I Unit: mm
| Ordering code | Size | Matching chuck Types | Increments [mm] | Type otseration | A | L |
| BH210-032-RD-01 | 32 | BC220-032 | 1 | # with Serration | 4-32 | 47 |
| BH210-042-RD-01 | 42 | BC220-042 | 0.5 | # with Serration | 4-42 | 47 |
| BH210-052-RD-01 | 52 | BC220-052 | # with Serration | 4-52 | 46 | |
| BH210-065-RD-01 | 65 | BC220-065 | with Serration | 4-65 | 58 | |
| BH210-080-RD-01 | 80 | BC220-080 | 1 | # with Serration | 4-80 | 53 |
| BH210-100-RD-01 | 100 | BC220-100 | # with Serration | 15-100 | 59 | |
| BH210-125-RD-01 | 125 | BC220-125 | With Serration | 25-125 | 67 | |
| BH210-160-RD-01 | 160 | BC220-160 | # with Serration | 27-160 | 63 |
I Unit: mm
> I Technical parameters
| iJ*% Ordering code | Size | Matching Chuck Types | Increments [mm] | # Type of serration | A | |
| BH220-032-RD-01 | 32 | BC220-032 | 1 | Smooth | 3-32 | 44 |
| BH220-042-RD-01 | 42 | BC220-042 | 0.5 | Smooth | 3-42 | 42 |
| BH220-052-RD-01 | 52 | BC220-052 | Smooth | 3-52 | 46 | |
| BH220-065-RD-01 | 65 | BC220-065 | # Smooth | 3-62 | 53 | |
| BH220-080-RD-01 | 80 | BC220-080 | 1 | Smooth | 4-80 | 53 |
| BH220-100-RD-01 | 100 | BC220-100 | Smooth | 15-100 | 59 | |
| BH220-125-RD-01 | 125 | BC220-125 | Smooth | 25-125 | 67 | |
| BH220-160-RD-01 | 160 | BC220-160 | Smooth | 27-160 | 63 |
I Unit: mm
> I Technical parameters
> t I Naming And Coding Rules
> t I Naming And Coding Rules
| iJ** Ordering code | Size | *+Rt Clamping head size [mm] |
| BK110-32-01 | 32 | 3-32 |
| BK110-42-01 | 42 | 3-42 |
| BK110-52-01 | 52 | 3-52 |
| BK110-65-01 | 65 | 3-65 |
| BK110-80-01 | 80 | 4-80 |
| BK110-100-01 | 100 | 15-100 |
| BK110-125-01 | 125 | 25-125 |
I Unit: mm
> I Technical parameters
| Ordering code | Storke [mm] | L | A | |
| BS110-00-RD-01 | BM110-00 | 0.25 | 24 | 20-28 |
| BS110-01-RD-01 | BM110-01 | 0.25 | 28 | 26-38 |
| BS110-02-RD-01 | BM110-02 | 0.25 | 44 | 36-54 |
| BS110-03-RD-01 | BM110-03 | 0.35 | 50 | 50-80 |
| BS110-04-RD-01 | BM110-04 | 0.4 | 60 | 69-100 |
| BS110-05-RD-01 | BM110-06 | 0.5 | 78 | 100-130 |
| BS110-06-RD-01 | BM110-07 | 0.5 | 86 | 130-160 |
| BS110-07-RD-01 | BM110-08 | 0.5 | 91 | 160-200 |
I Unit: mm
> I Technical parameters
| Ordering code | Storke [mm] | A | ||
| BS130-3S-RD-01 | BM120-3S | 0.2 | 30 | 8-13 |
| BS130-2S-RD-01 | BN120-2S | 0.25 | 30 | 13-19 |
| BS130-1S-RD-01 | BM120-1S | 31 | 16-21 | |
| BS130-00-RD-01 | BM120-00 | 41 | 20-28 | |
| BS130-01-RD-01 | BM120-01 | 46 | 26-38 | |
| BS130-02-RD-01 | BM120-02 | 61.5 | 36-54 | |
| BS130-03-RD-01 | BM120-03 | 0.35 | 67.5 | 50-80 |
| BS130-04-RD-01 | BM120-04 | 0.45 | 76 | 69-100 |
| BS130-05-RD-01 | BM120-05 | 0.5 | 85 | 100-130 |
| BS130-06-RD-01 | BM120-06 | 94.5 | 130-160 | |
| BS130-07-RD-01 | BM120-07 | 100 | 160-190 |
| BZ400 | P | M | S | 100 | 75 |
| 01 | 02 | 03 | 04 | 05 | 06 |
| 01 *# Type | |
| BZ400 | elf-centering vise |
| 02 Vise | |
| P | Precise |
| E | Economical |
| 03 tt Power Menthod | |
| M | Fa Manual |
| A | 5z Air |
| 04 INumber of Stations | |
| S | $I Single |
| D | XXI Double |
| 05 Vise Length | |
| 100 | 100mm |
| 130 | 130mm |
| 150 | 150mm |
| 155 | 155mm |
| 160 | 160mm |
| 170 | 170mm |
| 225 | 225mm |
| 255 | 255mm |
| 280 | 280mm |
| 300 | 300mm |
| 480 | 480mm |
| 06 Vise Width | |
| 075 | 75mm |
| 080 | 80mm |
| 100 | 100mm |
| 125 | 125mm |
| 130 | 130mm |
| 160 | 160mm |
F
Material: Hardened steel,surface and rail hardening treatment,stable structure
Manual operation, no additional power source required, simple to operate
Stable clamping with precise fit, reducing the up-and-down movement of the jaws
I Unit: mm
> # I Technical parameters
| iJ*s Ordering code | Locking force | EX* Positive and negative clamping | Max torque | IE Weight |
| BZ400-EMS-100075 | 14KN | 0-46/45-80 | 60Nm | 2.6 |
The spare parts can be ordered separately. Please inquire on demand
Material: Hardened steel,surface and rail hardening treatment,stable structure
Manual operation, no additional power source required, simple to operate
Stable clamping with precise fit, reducing the up-and-down movement of the jaws
Unit: mm
> #\* I Technical parameters
| iJs Ordering code | Locking force | EX* Positive and negative clamping | Max torque | Weight |
| BZ400-EMS-150100 | 20KN | 0-80/57-120 | 75Nm | 5.5 |
The spare parts can be ordered separately. Please inquire on demand
F
Material: Hardened steel,surface and rail hardening treatment,stable structure
Manual operation, no additional power source required, simple to operate
Stable clamping with precise fit, reducing the up-and-down movement of the jaws
I Unit: mm Unit: mm I Unit: mm
> # I Technical parameters
| iJ*s Ordering code | Locking force | EX* Positive and negative clamping | Max torque | Weight |
| BZ400-EMS-170130 | 25KN | 0-86/71-152 | 80Nm | 9.3 |
The spare parts can be ordered separately. Please inquire on demand
> #\* I Technical parameters
> t$\* I Technical parameters
| iJ5 Ordering code | Locking force | EX* Positive and negative clamping. | Max torque | I Weight |
| BZ400-PMS-150075 | 14KN | 0-90/41-126 | 60Nm | 3 |
| The spare parts can be ordered | rately. Please inquire on demand |
I Unit: mm I Unit: mm
> #$# I Technical parameters
| iJ*s Ordering code | Locking force | E* Positive and negative clamping | Max torque | I Weight |
| BZ400PMS-155125 | 20KN | 0-76/56-127 | 75Nm | 7 |
The spare parts can be ordered separately. Please inquire on demand
> t$\* I Technical parameters
| iJ*s Ordering code | Locking force | E* Positive and negative clamping | Max torque | I Weight |
| BZ400-PMS-225125 | 20KN | 0-177/56-228 | 75Nm | 9.8 |
| i | The spare parts can be ordered separately. Please inquire on demand | |||
I Unit: mm
> #$# I Technical parameters
| iJ Ordering code | Locking force | EX* Positive and negative clamping | Max torque | I Weight |
| BZ400-PMD-225125 | 20KN | 0-74/32-110 | 75Nm | 9.6 |
The spare parts can be ordered separately. Please inquire on demand
| BZ500 | PSC63 | V | 134 | ||
| 01 | 02 | 03 | 04 |
| 01 ##* Type | |
| BZ500 | PSC $ PSC Zero point |
| 02 # Interface Type | |
| PSC63 | PSC6 Interface |
| PSC80 | PSC8 Interface |
| 03 I Processing Method | |
| V | t Vertical |
| L | #Lathe |
| 04 K Length | |
| 134 | 134mm |
| 140 | 140mm |
| 150 | 150mm |
| 154 | 154mm |
| 162 | 162mm |
| 174 | 174mm |
| 182 | 182mm |
| 194 | 194mm |
| 202 | 202mm |
| 222 | 222mm |
> \* I Technical parameters
I Unit: mm
I Unit: mm
> #\*\* I Technical parameters
| iJ*s Ordering code | Rt Dimension | IE Weight | |||||||
| Interface type Reserve stroke axial [mm] Release stroke axial [mm] | B | c | M1 | M2 D1 | D2 | D3 | |||
| BZ500-PSC63L-140 | G PSC63 | 1.5 | M44X1.5M30x1.5 | 165 | 139 131 | 10.8 | |||
| BZ500-PSC80L-150 | 2 | 165 | 139 | 131 14 | |||||
| iJ Ordering code | D4 | D5 | D6 | L1 | L2 | L3 | L4 | ||
| BZ500-PSC63L-140 | LK0133.4 [6 x M12] | 116 | 63 | 140 | 100 | 18.4 | 26 | ||
| BZ500-PSC80L-150 | LK0133.4 [6 x M12] | 116 | 80 | 150 | 110 | 18.4 | 26 | ||
| The spare parts can be ordered separately.Please inquire on demand | |||||||||
| If you need to,please check the contact information on the back of the sample,we will immedieately provide you with a professional answer | |||||||||
>IPlease refer to
| BM140 Flanges BM140 | BZ500 Mandrel BZ500 |
| Page 33 | Page 85 |
I Unit: mm I Unit: mm
> \* I Technical parameters
| iJ Ordering code | Rt Dimension | IE Weight | ||||||
| Interface type G | A | D1 | L1 | L2 | L3 | L4 | ||
| BZ500-PSC63L-01-022032 | PSC63 | 22-32 | 63 | 70 | 26 | 25 | 12 | 1.1 |
| BZ500-PSC63L-02-032045 | 32-45 | 90 | 44 | 14 | 1.4 | |||
| BZ500-PSC80L-03-040065 | PSC80 | 40-65 | 80 | 100 | 50 | 30 | 13 | 2 |
| BZ500-PSC80L-04-060090 | 60-90 | 120 | 60 | 23 | 2.5 | |||
| The spare parts can be ordered separately. Please inquire on demand | ||||||||
>t I Naming And Coding Rules
| 01 #t Type | |
| BZ100 | Zero point systems module nit. |
| 02 tt Power Menthod | |
| M | F Manual |
| A | 5z Air |
| H | E Hydraulic |
| 03 Locking Structure | |
| B | Ball |
| W | Wedge |
| 04 # Whether ity has a gas test | |
| T | #Ture |
| F | T# False |
| 05 Diameter | |
| 090 | 90mm |
| 138 | 138mm |
>I Technical parameters
| iJ*s Ordering code | Rt Dimension | IE Weight | |||||
| DN | D1 | D2 | H | H1 | M | ||
| BZ100-AWF-090 | 90 | 78 | 13.5 | 5XM6 | 0.8 | ||
| BZ100-AWT-090 | 90 | 78 | 13.5 | 5XM6 | 0.9 | ||
| BZ100-AWF-138 | 138 | 110 | 121 | 55.7 | 39 | 6XM8 | 4.5 |
| BZ100-AWT-138 | 138 | 110 | 121 | 55.7 | 39 | 6XM8 | 4.5 |
| iJs Ordering code | #$ t Locking method | ** Clamping force | Tightening force | Blowing debris |
| BZ100-AWF-090 | 5 | 1.5 | ||
| BZ100-AWF-138 | 4E | 17 | 55 |
The spare parts can be ordered separately.Please inquire on demand
> i I Please refer to
| BZ300 Positioning dowel pin BZ300 | BZ300-B Directional puller pin BZ300-B | BZ300-C Locking studs BZ300-C |
| Page 89 | Page 90 | Page 91 |
| BZ300 | W | A | ||
| 02 | ||||
| 01 | 03 | 04 |
| 01 # Type | |
| BZ300 | Zero point systems Spanbolzen |
| 02 $ Locking Structure | |
| W | Wedge |
| 03 # Type | |
| A | 1T Positioning nail |
| B | $ Directional nail |
| C | $ Locking nail |
| 04 #zxJ Thread Size | ||
| M10 | M12 | M16 |
I Unit: mm
> \* I Technical parameters
| iJ*5 Ordering code | Rt Dimension | ** Holding force | Weight | |||
| DN | D1h6 | M | T | |||
| BZ300-WA-M10 | 40 | 25 | M10 | 5 | 35 | 0.3 |
| BZ300-WA-M12 | 40 | 25 | M12 | 5 | 50 | 0.3 |
| BZ300-WA-M16 | 40 | 25 | M16 | 5 | 75 | 0.3 |
I Unit: mm I Unit: mm
> #\*\* I Technical parameters
| iT* Ordering code | Rt Dimension | ** Holding force | Weight | |||
| DN | D1h6 | M | T | |||
| BZ300-WB-M10 | 40 | 25 | M10 | 5 | 35 | 0.3 |
| BZ300-WB-M12 | 40 | 25 | M12 | 5 | 59 | 0.3 |
| BZ300-WB-M16 | 40 | 25 | M16 | 5 | 75 | 0.3 |
> \* I Technical parameters
| iJs Ordering code | Rt Dimension | ** Holding force | IE Weight | |||
| DN | D1h6 | M | T | |||
| BZ300-WC-M10 | 40 | 25 | M10 | 5 | 35 | 0.3 |
| BZ300-WC-M12 | 40 | 25 | M12 | 5 | 59 | 0.3 |
| BZ300-WC-M16 | 40 | 25 | M16 | 5 | 75 | 0.3 |
MI
Two-station pull stud installation diagram
7stMethod 1
\* Four-station pull stud installation diagram
st= Method 2
| BZ210 | A | 2 | ||
| 10 04 | ||||
| 01 | 02 | 03 |
| 01 #a#* Type | |
| BZ210 | |
| Zero position base plate |
| 03 t Number of Units | |
| 2 | $ Two units |
| 4 | Four units |
| 02 tt Power Menthod | |
| M | Fst Manual |
| A | 4zt Air |
| H | ,EE Hydraulic |
| 04 * Clamping Force | |
| 10 | 10KN |
| 20 | 17KN |
I Unit: mm I Unit: mm I Unit: mm
>ITechnical parameters
| iJ*s Ordering code | R Dimension | |||||||||||
| L w | L1 | L2 | L3(0.01) | W1 | H | H1 | R | E | E1 | G | ||
| BZ210-A2-10 | 366 | 166 | 250-252 | 200 | 200 | 138 | 30 | 10 | 18 | 20 | 12.5 | G1/8 |
| BZ210-A2-20 | 398 | 198 | 250-252 | 200 | 200 | 164 | 38 | 15 | 18 | 20 | 12.5 | G1/4 |
| iJ*s Ordering code | Locking method | ** Clamping force | Tightening force | Blowing debris | I Weight |
| BZ210-A2-10 | 2X10 | 2X25 | 12.6 | ||
| BZ210-A2-20 | 4E | 2X17 | 2X55 | 22.7 | |
| i,i | The spare parts can be ordered separately. Please inquire on demand |
>I Technical parameters
| iJ*s Ordering code | Rt Dimension | ||||||||||
| L | w | L1 | L2(0.01) | W1 | W2 | H | H1 | E | E1 | G | |
| BZ210-A4-10 | 366 | 166 | 336 | 200 | 250-252 | 200 | 32 | 10 | 20 | 12.5 | G1/8 |
| BZ210-A4-20 | 398 | 198 | 364 | 200 | 250-252 | 200 | 38 | 15 | 20 | 12.5 | G1/4 |
| iJ* Ordering code | Locking method | ** Clamping force | Tightening force | Blowing debris | IE Weight |
| BZ210-A4-10 | 4E | 4X10 | 4X25 | 28.7 | |
| BZ210-A4-20 | 4X17 | 4X55 | J | 46 | |
| i | The spare parts can be ordered separately. Please inquire on demand | ||||
> I Technical parameters
| iJ* Ordering code | Rt Dimension | IE Weight | |||
| L | W | L1 | H | ||
| BZ210-V2-10-B | 366 | 166 | 200 | 28 | 16.67 |
| BZ210-V2-20-B | 398 | 198 | 200 | 28 | 16.67 |
>t I Naming And Coding Rules
I Unit: mm
> #\*\*x I Technical parameters
| iTs Ordering code | Rt Dimension | IE Weight | |||
| L | W | L1 | H | ||
| BZ210-V4-10-B | 366 | 166 | 200 | 28 | 34 |
| BZ210-V4-20-B | 398 | 198 | 200 | 28 | 34 |
| BZ210-V4-40-B | 366 | 166 | 200 | 28 | 34 |
| If you need non-standard customization, please check the contact | |||||
| information behind the sample | |||||
| Ji The spare parts can be ordered separately. Please inquire on demand | |||||
> 3t I Naming And Coding Rules
| 01 #t Type | |
| BZ220 | e poon quick change pate |
| 02 tt Power Menthod | |
| M | Fs Manual |
| A | 5z Air |
| H | E Hydraulic |
| 03 t* Quick Change Plate Sort | |
| N | Normal |
| T | F Throuth-hole |
| A | $ Of aluminium |
| 04 $TiE Pin Spacing | |
| 52 | 52mm |
| 96 | 96mm |
| 9652 | 96mm/52mm |
05 / K Circular Diameter/Square Length
| 120 | 120mm Diameter 120mm |
| 170 | 170mm Diameter 170mm |
| 185 | 185mm Diameter 185mm |
| 200 | 200mm Diameter 200mm |
| 108 | K 170mm Length 170mm |
| 125 | 125mm Length 125mm |
| 155 | K155mm Length 155mm |
| 175 | K 175mm Length 175mm |
| 210 | K210mm Length 210mm |
| 340 | K 340mm Length 340mm |
I Unit: mm
>I Technical parameters
| iJ* Ordering code | Locking force | Bolt | IE Weight |
| BZ220-MN-52-120 | 18KN | 4XM10 | 1.7 |
The spare parts can be ordered separately. Please inquire on demand
