Body Ported SY9000 Series Type 23

Electrical entry for G, H, L, M, W

Nil Without light/surge voltage suppressor

S

Z

With surge voltage suppressor

With light/surge voltage suppressor

R With surge voltage suppressor (Non-polar type)

U With light/surge voltage suppressor (Non-polar type)

∗ For AC voltage valves there is no “S” option.

It is already built-in to the rectifier circuit.

∗ For “R” and “U”, DC voltage is only available.

∗ Power saving circuit is only available in the

“Z” type.

Light/Surge voltage suppressor

Electrical entry for D, Y

Nil Without light/surge voltage suppressor

S

Z

With surge voltage suppressor

With light/surge voltage suppressor

∗ DOZ and YOZ are not available.

∗ For AC voltage valves there is no “S”

option. It is already built-in to the rectifier

circuit.

Rated voltage

5 24 VDC

6 12 VDC

V 6 VDC

S 5 VDC

R 3 VDC

For DC For AC ( Hz)

1 100 VAC

2 200 VAC

3 110 VAC [115 VAC]

4 220 VAC [230 VAC]

50 60

∗ DC specifications of type D, Y, DO and YO is only

available with 12 and 24 VDC.

∗ For type Wfi, DC voltage is only available.

Note) AC-type models that are CE/UKCA-compliant have

DIN terminals only.

SY 9 1 20 5 L 02

How to Order Valve

9 SY9000

Series

1 2 position single

2 2 position double

3 3 position closed center

4 3 position exhaust center

5 3 position pressure center

Type of actuation

Nil Internal pilot

R External pilot

Pilot specifications

∗ In the case of external

pilot specifications, it

cannot be used as a single

unit.

∗ Power saving circuit is not available in the case

of D, Y, DO, YO or Wfi type.

Nil Standard

T With power saving circuit (24 VDC, 12 VDC only)

Coil specifications

Grommet

24, 12, 6, 5, 3 VDC/

100, 110, 200, 220 VAC

L plug connector M plug connector

24, 12 VDC/

100, 110, 200,

220 VAC

DIN terminal

∗ LN, MN type: with 2 sockets.

∗ “Y” type is a DIN terminal conforming to EN-175301-803C (former DIN43650C). For details, refer

to page 957.

∗ For connector cable of M8 connector, refer to page 960.

∗ M8 connector conforming to IEC60947-5-2 standard is also available. Refer to page 941 for

details.

∗ Refer to page 957 for the lead wire length of L and M plug connectors.

∗ Refer to page 958 for the connector assembly with cover for L and M plug connectors.

Note) Enter the cable length symbols in fi. Please be sure to fill in the blank referring to page 961.

Electrical entry

DC

AC

CE/UKCAcompliant

G: Lead wire

length 300 mm

H: Lead wire

length 600 mm

L: With lead wire

(Length 300 mm)

LN: Without lead wire

LO: Without connector

M: With lead wire

(Length 300 mm)

MN: Without lead wire

MO: Without connector

D: With connector

DO: Without connector

Y: With connector

YO: Without connector

WO: Without connector

cable

Wfi: With connector

cable

24, 12, 6,

5, 3 VDC

M8 connector

Note)

Rc

N NPT

T NPTF

F G

Thread type

Nil

Made to Order

Nil —

X90 Main valve fluororubber

(Refer to page 942.)

CE/UKCA-compliant

Note) AC-type models that are

CE/UKCA-compliant

have DIN terminals only.

Nil —

Q CE/UKCA-compliant

Symbol Port size

02

03 3 8

1 4

Thread piping

One-touch fitting (Metric size)

A, B port size

Symbol Port size

C8 One-touch fitting for ø8

C10 One-touch fitting for ø10

C12 One-touch fitting for ø12

One-touch fitting (Inch size)

Symbol Port size

N9 One-touch fitting for ø

N11 One-touch fitting for ø

5 16\"

3 8\"

Nil Non-locking push type

D Push-turn locking slotted type

E Push-turn locking lever type

Manual override

ff

—

ff

—

ff

—

ff

ff

ff

—

Round head combination screw

Gasket

fflGasket assembly part no.

Note) The gasket assembly includes

10 sets of mounting screws

and a gasket.

Series Gasket assembly part no.

SY9000 SY9000-GS-1

Note) When placing an order for body ported solenoid

valve as a single unit, mounting screw for

manifold and gasket are not attached. Order

them separately, if necessary.

Note) AC-type models that are CE/UKCA-compliant

have DIN terminals only. [Option]

773

Type 23 SY9000 Series

Model

Applicable valve

Manifold type

P (SUP)/R (EXH)

Valve stations

A, B port location

Port size

Manifold base weight W (g)

n: Stations

P, EA, EB port

A, B port

SS5Y9-23(-Q)

SY9fi20

Stacking type

Common SUP, Common EXH

2 to 20 stations Note1)

Valve

3 8

1 4

3 8

C8 (One-touch fitting for ø8)

C10 (One-touch fitting for ø10)

C12 (One-touch fitting for ø12)

W = 66n + 246

Note 1) For more than 10 stations, supply pressure to P port on both sides and exhaust from EA/EB port on

both sides.

Note 2) Refer to “Manifold Option” on page 795.

Manifold Specifications

Flow Rate Characteristics

3 8 C12 6.3 0.20 1.5 8.2 0.28 1.9

Model 1, 5, 3

(P, EA, EB)

4, 2

(A, B)

1 → 4/2 (P → A/B) 4/2 → 5/3 (A/B → EA/EB)

Port size Flow rate characteristics

C (dm3/(s·bar) ) b Cv C (dm3/(s·bar) ) b Cv

SS5Y9-23(-Q)

Note) The value is for manifold base with 5 stations and individually operated 2 position type.

774

P E 5

–+ –+ –+ –+ –+

15

13.5 13.5

8

[1(P), 3 (EB), 5(EA) port]

3/8

36

5.5 16.335

[4(A), 2(B) port]

1/4, 3/8

147.8 [152.2]

13.8

25.5 25.548.3

96.62533.6 38.1 38.156.3 73.9 [76.1]

51.7 68.2 51.7

72.4 [79.4] 92.5 (5.5)

57

1020 1060.9 [67.9] 20 81 (5.5)

81 (5.5)

45.5

(SUP port)

1/4

(13.8)

83

31.5

182.3 165.8

82.9

151 167.5

75.5

76.9

59.4

87.4

98.7

106.2

Pg7

204.1 187.6

93.8

Max. 10 202.3 185.8

92.9

M8 x 1

83.5 [90.5]

74 [76.2] 148 [152.4] 164.5 [168.9]

57

72.4 [79.4]

83.8 [86] 167.6 [172] 184.1 [188.5]

(Lead wire length)

Approx. 300 Approx. 300 (Lead wire length)

Applicable cable O.D.

ø3.5 to ø7

P1 3EB 5EA

P1 3EB 5EA5EA 3EB 1 P

5EA 3EB 1 P

1

– +

– +

1

1

EXH port

1/4 (Both sides)

(Height when using DIN rail)

(Light/surge voltage suppressor)

(Station n) (Station 1)

5EA 3EB 1 P

Tightening torque: 0.55 to 0.65N·m

<When attaching the DIN rail>

DIN rail holding screw

4A

2B 4A4A4A4A 2B2B2B2B

PE X Z

X P E

L5

Manual override

L3

L2

L1

L4

5

P = 24

(Pitch)

(DIN: 53) (DIN: 69.5) (DIN: 53) 164.3 [168.7]

(Lead wire length) Approx. 300

(Rail mounting hole pitch: 12.5)

DIN rail

(For mounting)

4 x ø6.3

: ø12 : ø10, ø3/8\" Applicable tubing O.D.: ø8, ø5/16\"

[4(A), 2(B) port]

One-touch fitting (Pilot EXH port)

M5 x 0.8

<In the case of external pilot type solenoid valve>

(External pilot port)

M5 x 0.8

Body Ported SY9000 Series Type 23

SY9000: SS5Y9-23- Stations -(D) [ ]: AC

Grommet (G)

Individual EXH spacer is

mounted

Individual SUP spacer

is mounted

(SUP port is at the end plate of

single solenoid.)

L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO)

Note) Refer to page 961 for

dimensions of connector types.

Stations n

148

137.5

120

14

90

173

162.5

144

14.5

114

123

112.5

96

13.5

66

198

187.5

168

15

138

223

212.5

192

15.5

162

248

237.5

216

16

186

273

262.5

240

16.5

210

298

287.5

264

17

234

323

312.5

288

17.5

258

335.5

325

312

12

282

360.5

350

336

12.5

306

385.5

375

360

13

330

410.5

400

384

13.5

354

435.5

425

408

14

378

460.5

450

432

14.5

402

485.5

475

456

15

426

510.5

500

480

15.5

450

535.5

525

504

16

474

560.5

550

528

16.5

498

L1

L2

L3

L4

L5

Note) In the case of direct mounting without DIN rail, total width of manifold is L3.

2 stations 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 stations

775

Note) CE/UKCA-compliant:

For DC only.

Type 20P

How to Order Manifold Note) CE/UKCA-compliant:

For DC only.

3 SY3000

5 SY5000

7 SY7000

Manifold series

Note) SS5Y3 has 4

to 12 stations. ...

3 stations

12 stations

... 03

12

Stations

Rc

NPT

Nil

00N

00T NPTF

00F G

Thread type

Nil —

Q CE/UKCA-compliant

CE/UKCA-compliant

How to Order Manifold Assembly (Example)

SS5Y3-20P-06 1 set (Type 20P, 6-station manifold part no.)

∗ SY3000-26-10A 1 set (Blanking plate assembly part no)

∗ SY3120-5LOU-C6 3 sets (Single solenoid part no.)

∗ SY3220-5LOU-C6 2 sets (Double solenoid part no.)

∗ SY3000-37-3A 3 sets (Connector assembly part no.)

∗ SY3000-37-4A 2 sets (Connector assembly part no.)

Example

Add the valve and option part number under the manifold base part number.

In the case of complex arrangement, specify them on the manifold

specification sheet.

Caution

Connector Assembly

For 12, 24 VDC For 100 VAC For 100 VAC (115 VAC)

Specifications For SY3000

For single solenoid SY3000-37-3A

Double solenoid,

3 position type SY3000-37-4A

Single with

spacer assembly SY5000-37-3A

Double, 3 position

with spacer assembly SY3000-37-6A

For SY5000/7000

SY5000-37-3A

SY5000-37-4A

SY5000-37-5A

SY5000-37-6A

Specifications For SY3000

For single solenoid SY3000-37-32A

Double solenoid,

3 position type SY3000-37-33A

Single with

spacer assembly SY5000-37-15A

Double, 3 position

with spacer assembly SY3000-37-34A

For SY5000/7000

SY5000-37-15A

SY5000-37-16A

SY5000-37-17A

SY5000-37-18A

Specifications For SY3000

For single solenoid SY3000-37-35A

Double solenoid,

3 position type SY3000-37-36A

Single with

spacer assembly SY5000-37-19A

Double, 3 position

with spacer assembly SY3000-37-37A

For SY5000/7000

SY5000-37-19A

SY5000-37-20A

SY5000-37-21A

SY5000-37-22A

• For non-polar (U) valves, the electrical DC connections can be used with either positive and negative COM. For type (Z), only use with positive

COM as the valve does not operate correctly when used with negative COM.

123

Stations

EA P EB

The asterisk denotes the symbol for assembly.

Prefix it to the part nos. of the solenoid valve, etc.

Note) Please indicate the connector assembly part no. below that connects the

valve and the manifold.

Note) Spacer assembly indicates Individual SUP/EXH.

SY3000/5000/7000 Series

5 Port Solenoid Valve

Body Ported Manifold

Bar Stock Type/Flat Ribbon Cable

SS5Y3-20P-06

Manifold base (6 stations)

SY3000-26-10A (1 set)

Blanking plate assembly

SY3120-5LOU-C6 (3 sets)

Single solenoid (24 VDC)

SY3220-5LOU-C6 (2 sets)

Double solenoid (24 VDC)

C6: With One-touch fitting for ø6

Cylinder port size

SY3000-37-4A

(Double solenoid) Connector assembly

SY3000-37-3A

(Single solenoid) Connector assembly

·······

······

···

···

········

········

SS5Y 5 20P 05

[Option]

776

5 1 20 LO Z 5 01

5 1 20 LOZ 1 01

Nil Standard

T With power saving circuit

Coil specifications

fiGasket assembly part no.

Gasket

Round head combination screw

Body Ported SY3000/5000/7000 Series Type 20P

Note) CE/UKCA-compliant:

For DC only.

5 24 VDC

6 12 VDC

Rated voltage CE/UKCA-compliant

ff

ff

For DC: SY

For AC: SY

How to Order Valve

1 100 VAC

3 110 VAC (115 VAC)

Rated voltage CE/UKCA-compliant

—

—

Note) CE/UKCA-compliant: For DC only.

3 SY3000

5 SY5000

7 SY7000

Series

1 2 position single

2 2 position double

3 3 position closed center

4 3 position exhaust center

5 3 position pressure center

Type of actuation

Nil Non-locking push type

D Push-turn locking slotted type

E Push-turn locking lever type

Manual override

Note) CE/UKCA-compliant:

For DC only.

Nil —

Q CE/UKCA-compliant

CE/UKCA-compliant

Rc

NPT

Nil

N

T NPTF

F G

Thread type

∗ Except for M5

Note) In the case of flat cable type,

“U” and “Z” types are for DC

specifications and “Z” type is for

AC specifications. “Z” for DC is

positive common specifications

only.

Z

With light/surge voltage suppressor

(Non-polar type) U

With light/surge voltage suppressor

Light/surge voltage suppressor

Note) Z: Positive common

specifications only.

∗ Power saving circuit is only

available in the “Z” type.

Symbol Port size

M5 x 0.8 SY3000

Applicable series

SY5000

M5

01

02 1 4 SY7000

1 8

Thread piping

One-touch fitting (Metric size)

A, B port size

Symbol Port size Applicable series

SY3000

SY5000

SY7000

C4 One-touch fitting for ø4

C6 One-touch fitting for ø6

C4 One-touch fitting for ø4

C6 One-touch fitting for ø6

C8 One-touch fitting for ø8

C8 One-touch fitting for ø8

C10 One-touch fitting for ø10

One-touch fitting (Inch size)

Symbol Port size Applicable series

SY3000

SY5000

SY7000

N3 One-touch fitting for ø

N7 One-touch fitting for ø

N3 One-touch fitting for ø

N7 One-touch fitting for ø

N9 One-touch fitting for ø

N9 One-touch fitting for ø

N11 One-touch fitting for ø

5 32\"

1 4\"

5 32\"

1 4\"

5 16\"

5 16\"

3 8\"

Note) When placing an order for body ported solenoid

valve as a single unit, mounting screw for manifold

and gasket are not attached. Order them separately,

if necessary.

Note) Since the electrical entry is “LO”, select a connector

assembly part no. from those stated on page 776.

Note) The gasket assembly includes

10 sets of mounting screws

and a gasket.

Series Gasket assembly part no.

SY3000-GS-1

SY5000-GS-1

SY7000-GS-1

SY3000

SY5000

SY7000

[Option]

777 A

Wiring unit

Station

Solenoid A side

Solenoid B side

Connected on PCB

Station 1

SOL.b (+) (–)

SOL.a (+) (–)

SOL.b (+) (–)

SOL.a (+) (–)

SOL.b (+) (–)

SOL.a (+) (–)

SOL.b (+) (–)

SOL.a (+) (–)

26 25

24 23

8 7

6 5

4 3

2

Station 12 (Max. 12 stations)

Station 4

Station 3

Station 2

SOL.b (+) (–)

SOL.a (+) (–)

Common (–) (+)

Common (–) (+)

1

Type 20P SY3000/5000/7000 Series

• For non-polar (U) valves, the electrical DC

connections can be used with either positive

and negative COM. For type (Z), only use with

positive COM as the valve does not operate

correctly when used with negative COM.

Caution

fi Multiple valve wiring is

simplified through the use

of the flat cable connector

fi Clean appearance

In the case of a flat ribbon cable type, each

valve is wired on the print board of manifold

base to allow the external wiring to be piped all

together with 26 pins MIL connector.

Manifold Specifications

Flow Rate Characteristics

Model

Applicable valve

Manifold type

P (SUP)/R (EXH)

Valve stations

A, B port location

Port size

Manifold base weight W (g)

n: Stations

P, EA, EB port

A, B port

SS5Y3-20P(-Q)

SY3ff20

SS5Y5-20P(-Q)

SY5ff20

SS5Y7-20P(-Q)

SY7ff20

Single base/B mount

Common SUP, Common EXH

4 to 12 stations(1) 3 to 12 stations Note 1)

Valve

1 8 1 4

1 8

1 4

1 M5 x 0.8, 4

C4 (One-touch fitting for ø4)

C6 (One-touch fitting for ø6)

C4 (One-touch fitting for ø4)

C6 (One-touch fitting for ø6)

C8 (One-touch fitting for ø8)

C8 (One-touch fitting for ø8)

C10 (One-touch fitting for ø10)

W = 19n + 45 W = 43n + 77 W = 51n + 81

Applicable flat ribbon cable connector

Internal wiring

Rated voltage Note 4)

Flat ribbon cable connector, Socket: 26 pins MIL type with strain relief, Conforming to MIL-C-83503

In common between +COM and –COM (Z type: +COM only).

12, 24 VDC 100, 110 VAC

1 8

1 4

C6

C8

C10

0.72

1.9

3.6

0.29

0.28

0.31

0.18

0.48

0.93

0.80

2.2

3.6

0.36

0.20

0.27

0.21

0.53

1 4 0.88

Model 1, 5, 3

(P, EA, EB)

4, 2

(A, B)

1 → 4/2 (P → A/B) 4/2 → 5/3 (A/B → EA/EB)

Port size Flow rate characteristics

C [dm3/(s·bar)] b Cv C [dm3/(s·bar)] b Cv

SS5Y3-20P

SS5Y5-20P

SS5Y7-20P

Note 1) For more than 10 stations (more than 5 stations in case of SS5Y7), supply pressure to P port on both

sides and exhaust from EA/EB port on both sides.

Note 2) The withstand voltage specification for the wiring unit section is JIS C 0704, Grade 1 or its equivalent.

Note 3) Refer to “Manifold Option” on page 795.

Note 4) CE/UKCA-compliant: For DC only.

Note) The value is for manifold base with 5 stations and individually operated 2 position type.

• For more than 10 stations, both poles of the

common should be wired.

• For single solenoid, connect to the solenoid A side.

• The maximum number of stations that can be

accommodated is 12.

Internal Wiring of Manifold

Triangle mark

Reference figure

Note)

Terminal no. is not indicated on the connector. The terminal no.

indicated in the connection schematic of connector, as shown in

the reference, means a correlation of 1, 2, 3····26 from the

triangle mark side on the flat ribbon cable of connector.

Triangle mark

A 778

– +

B

A

– +

B

A

– +

B

A

+ -

– +

B

A

+ -

– +

B

A

P EB EA

P EB EA

20

5.8

26.649 [56]

28.5

4

18.5

117.1 [121.5] 45.7 7.2

18.4 10.2

1.3 (3.2)

108.6 [113] 15.5 16

82.8 77.8 [80]

L1

L2

(Pitch)

P=12.5

(For mounting)

4 x ø4.5

(A, B port)

M5 x 0.8

Manual override

: ø6, ø1/4\"

Applicable tubing O.D.: ø4, ø5/32\"

A, B port

One-touch fitting Triangle mark

P, EA, EB port

1/849 14

M5 port

16.5 16.5 23.5

12.5

44

C6: 54.1 N7: 57.9

(Station n) (Station 1)

(Conforming to MIL-C-83503)

with strain relief

Applicable connector: 26 pins MIL type

(Light/surge voltage suppressor)

Body Ported SY3000/5000/7000 Series Type 20P

SY3000: SS5Y3-20P- Stations [ ]: AC

Stations n 4

72.5

64.5

5

85

77

6

97.5

89.5

7

110

102

8

122.5

114.5

9

135

127

10

147.5

139.5

11

160

152

12

172.5

164.5

L1

L2

779

–+ –+ –+ –+

+-

–+

+-

1/4

28.5

7.3 36.2 26.5

21 21

11.5

16.5

60

30

55.1 [62.1] 67.4 (4.9)

59.5

(Station n) (Station 1)

(Conforming to MIL-C-83503)

with strain relief

Applicable connector: 26 pins MIL type

(Light/surge voltage suppressor)

(P, EA, EB port)

L2

L1

16.2 20

93.8 2.3

5

21

(Pitch)

P=17.5

P EB EA

B

B

B

B

B

A

A

A

A

A

P EB EA

14.5

31.4

44 63.5 [65.7]127 [131.4] 139.6 [144] 31.4

Manual override

Triangle mark

(A, B port)

1/8

Applicable tubing O.D.: ø4, ø5/32\"

ø6, ø1/4\"

ø8, ø5/16\"

A, B port

One-touch fitting

(For mounting)

4 x ø4.5

Type 20P SY3000/5000/7000 Series

SY5000: SS5Y5-20P-Stations [ ]: AC

Stations n 4 5

94.5

84.5

3

77

67

112

102

6

129.5

119.5

7

147

137

8

164.5

154.5

9

182

172

10

199.5

189.5

11

217

207

12

234.5

224.5

L1

L2

780

–+

A

B

–+

A

B

–+

A

B

–+

+-

A

B

+-

–+

A

B

P EB EA P EA EB

8.8

28.5

11.5

16.5

2121 60 30

58.5[65.5] 74.6 67 38.1 26.5 (5.5)

(Station n) (Station 1)

(Light/surge voltage suppressor)

(Conforming to MIL-C-83503)

with strain relief

Applicable connector: 26 pins MIL type

(P, EA, EB port)

1/4

L2

L1

10

23.59.4 20 93.8

(Pitch)

P=20.5

38.5 51.5 38.5 70.6 [72.8] 141.2 [145.6] 154.2 [158.6] 19 21

(For mounting)

4 x ø4.5

ø10, ø3/8\"

Applicable tubing O.D.: ø8, ø5/16\"

A, B port

One-touch fitting Triangle mark

Manual

override

A, B port

1/4

Body Ported SY3000/5000/7000 Series Type 20P

SY7000: SS5Y7-20P- Stations [ ]: AC

Stations n 4 5

108.5

88.5

3

88

68

129

109

6

149.5

129.5

7

170

150

8

190.5

170.5

9

211

191

10

231.5

211.5

11

252

232

12

272.5

252.5

L1

L2

781

1

3

100 VAC

110 VAC (115 VAC)

CE/UKCA-compliant

—

—

Rated voltage

Note) CE/UKCA-compliant: For DC only.

5

6

24 VDC

12 VDC

Rated voltage CE/UKCA-compliant

fi

fi

For AC:

For DC:

[Option]

Note) CE/UKCA-compliant: For DC only.

Type 23P

How to Order Manifold

9 SY9000

Manifold series

Rc

NPT

Nil

00N

00T NPTF

00F G ,..

Stations

4 stations

12 stations

...

Symbol

04

12

Valve stations

∗ This also includes the number

of blanking plate assemblies.

Note) CE/UKCA-compliant:

For DC only.

Nil —

Q CE/UKCA-compliant

CE/UKCA-compliant

How to Order Manifold Assembly (Example)

Example

SS5Y9-23P-05 1 set (Type 23, 5-station manifold base part no.)

∗ SY9000-26-3A 1 set (Blanking plate assembly part no.)

∗ SY9120-5LOU-C12 2 sets (Single solenoid part no.)

∗ SY9220-5LOU-C12 2 sets (Double solenoid part no.)

∗SY9000-37-1A 2 sets (Connector assembly part no.)

∗SY9000-37-2A 2 sets (Connector assembly part no.)

Add the valve and option part number under the manifold base part

number. In the case of complex arrangement, specify them on the

manifold specification sheet.

The asterisk denotes the symbol for assembly.

Prefix it to the part nos. of the solenoid valve, etc.

9 SY9000

1 2 position single

2 2 position double

3 3 position closed center

4 3 position exhaust center

5 3 position pressure center

Series

Type of actuation

Nil Internal pilot

R External pilot

Pilot specifications

Nil

D

E

Non-locking push type

Push-turn locking slotted type

Push-turn locking lever type

Manual override

∗ Type 23P manifolds can be used

for both internal and external pilots.

Rc

NPT

Nil

N

T NPTF

F G

Thread type

Symbol Port size

02

03 3 8

1 4

Thread piping

One-touch fitting (Metric size)

A, B port size

Symbol Port size

C8 One-touch fitting for ø8

C10 One-touch fitting for ø10

C12 One-touch fitting for ø12

One-touch fitting (Inch size)

Symbol Port size

N9 One-touch fitting for ø

N11 One-touch fitting for ø

5 16\"

3 8\"

Note) In the case of flat cable type, “U” and “Z” types are for DC

specifications and “Z” type is for AC specifications. “Z” type for

DC is positive common specification onlly.

Note) When placing an order for body ported solenoid valve as a

single unit, mounting screw for manifold and gasket are not

attached. Order them separately, if necessary.

Note) Since the electrical entry is “LO”, select a connector assembly

part no. from those stated on page 783.

How to Order Valve

Note) Please indicate the connector assembly part no. (page 783) that connects

the valve and the manifold.

SY9000 Series

5 Port Solenoid Valve

Body Ported Manifold

Stacking Type/Flat Ribbon Cable

Coil specifications

Nil Standard

T With power saving circuit

Note) CE/UKCA-compliant:

For DC only.

Nil —

Q CE/UKCA-compliant

CE/UKCA-compliant

Round head combination screw

Gasket

ffGasket assembly part no.

Note) The gasket assembly includes

10 sets of mounting screws

and a gasket.

Series Gasket assembly part no.

SY9000 SY9000-GS-1

SY 9 1 20 1 LOZ 02

SY 9 1 20 5 LO 02

Z

With light/surge

voltage suppressor

(Non-polar type) U

With light/surge

voltage suppressor

Light/Surge voltage suppressor

Z

Note) Z: Positive common

specifications only.

∗ Power saving circuit is

only available in the “Z”

type.

Double solenoid (24 VDC)

SS5Y9-23P-05

Manifold base (5 stations)

SY9000-26-3A (1 set)

Blanking plate assembly

SY9120-5LOU-C12 (2 sets)

Single solenoid (24 VDC)

SY9220-5LOU-C12 (2 sets)

C12: One-touch fitting for ø12

Cylinder port Port size

SY9000-37-2A

(Double solenoid) Connector assembly

SY9000-37-1A

(Single solenoid) Connector assembly

12 3 Stations

Type 23P/Common external pilot capable

··········

··········

···

···

············

············

Thread type

SS5Y 9 23P 05

Mounting

Direct mounting

DIN rail mounting (with DIN rail)

DIN rail mounting (without DIN rail)

Symbol

Nil

D

D0

D ∗

Option

When a longer DIN rail is desired than the specified stations,

specify the station number to be required into ∗ mark.

A 782

Wiring unit

Station

Solenoid A side

Solenoid B side

Triangle mark

Reference figure

Body Ported SY9000 Series Type 23P

In the case of a flat ribbon cable type, each valve is

wired on the print board of manifold base to allow

the external wiring to be piped all together with 26

pins MIL connector.

fi Multiple valve wiring is simplified through

the use of the flat cable connector.

fi Clean appearance

Connector Assembly

Specifications For SY9000

SY9000-37-1A

SY9000-37-2A

SY9000-37-3A

SY9000-37-4A

For 12, 24 VDC

For 100 VAC

For 110 VAC (115 VAC)

Specifications For SY9000

SY9000-37-1B

SY9000-37-2B

SY9000-37-3B

SY9000-37-4B

Specifications For SY9000

SY9000-37-1C

SY9000-37-2C

SY9000-37-3C

SY9000-37-4C

For single solenoid

Double solenoid

3 position

Single

with spacer assembly

Double, 3 position

with spacer assembly

For single solenoid

Double solenoid

3 position

Single

with spacer assembly

Double, 3 position

with spacer assembly

For single solenoid

Double solenoid

3 position

Single

with spacer assembly

Double, 3 position

with spacer assembly

Model

Applicable valve

Applicable flat ribbon cable connector

Internal wiring

Rated voltage Note4)

Manifold type

P (SUP)/R (EXH)

Valve stations

A, B port location

Port size

Manifold base weight W (g)

n: Stations

P, EA, EB port

A, B port

SS5Y9-23P(-Q)

SY9ff20

Stacking type

Common SUP, Common EXH

4 to 12 stations Note1)

Valve

3 8

1 4

3 8

C8 (One-touch fitting for ø8)

C10 (One-touch fitting for ø10)

C12 (One-touch fitting for ø12)

W = 73n + 259

Flat ribbon cable connector, Socket: 26 pins MIL with strain relief, Conforming to MIL-C-83503

In common between +COM and –COM (Z type: +COM only)

12, 24 VDC, 100, 110 VAC

Note 1) For more than 10 stations, supply pressure to P port on both sides and exhaust from EA/EB port on both sides.

Note 2) The withstand voltage specification for the wiring unit section is JIS C 0704, Grade 1 or its equivalent.

Note 3) Refer to “Manifold Option” on page 795.

Note 4) CE/UKCA-compliant: For DC only.

Manifold Specifications

Flow Rate Characteristics

3 8 C12 6.3 0.20 1.5 8.2 0.28 1.9

Model 1, 5, 3

(P, EA, EB)

4, 2

(A, B)

1 → 4/2 (P → A/B) 4/2 → 5/3 (A/B → EA/EB)

Port size Flow rate characteristics

C (dm3/(s·bar)) b Cv C (dm3/(s·bar)) b Cv

SS5Y9-23P(-Q)

Note) The value is for manifold base with 5 stations and individually operated 2 position type.

Internal Wiring of Manifold

• For more than 10 stations, both poles of the common should be wired.

• For single solenoid, connect to the solenoid A side.

• The maximum number of stations that can be accommodated is 12.

• For non-polar (U) valves, the electrical DC

connections can be used with either positive

and negative COM. For type (Z), only use with

positive COM as the valve does not operate

correctly when used with negative COM.

Caution

Note) Spacer assembly indicates Individual

SUP/EXH.

Note)

Terminal no. is not indicated on the connector. The

terminal no. indicated in the connection schematic of

connector, as shown in the reference, means a

correlation of 1, 2, 3····26 from the triangle mark side on

the flat ribbon cable of connector.

Connected on PCB

Station 1

SOL.b (+) (–)

SOL.a (+) (–)

SOL.b (+) (–)

SOL.a (+) (–)

SOL.b (+) (–)

SOL.a (+) (–)

SOL.b (+) (–)

SOL.a (+) (–)

26 25

24 23

8 7

6 5

4 3

2

Station 12 (Max. 12 stations)

Station 4

Station 3

Station 2

SOL.b (+) (–)

SOL.a (+) (–)

Common (–) (+)

Common (–) (+)

1

Triangle mark

783 A

-+ -+ -+ -+ -+

+-

+-

2B 4A

2B 4A

2B 4A

2B

PE4A

X 2B 4A PE X

5EA 3EB 1P

-+-+-+-+-+

(5.5)

31.5 15.542.2

52.5

72.4 [79.4] (13.8)

92.5 83

(Station n) (Station 1)

(Conforming to MIL-C-83503)

Applicable connector: 26 pins MIL type

With strain releaf

(Height when using DIN rail)

(Light/surge voltage suppressor)

[1(P), 3 (EB), 5(EA) port] 130.4 25.525.596.6

13.8

48.3

3/8

<When attaching the DIN rail>

Tightening torque: 0.55 to 0.65 N·m

DIN rail holding screw

(Rail mounting hole pitch: 12.5)

L5

L3

L2

L1

15

13.5

L4

5

(Pitch)

P=24 21

13.5

2533.6 38.1 38.156.3 167.6 [172]

8

16.3

5.5 3551.7 51.7

68.2 184.1 [188.5] 83.8 [86]

DIN rail

Manual override

1/4, 3/8 Triangle mark

[4(A), 2(B) port]

(Pilot EXH port)

<In the case of external pilot type solenoid valve>

M5 x 0.8

[Mounting hole when not using DIN rail]

(Pilot EXH port)

<In the case of external pilot>

Applicable tubing O.D. : ø8, ø5/16\"

: ø10, ø3/8\"

: ø12

[4(A), 2(B) port]

One-touch fitting

4 x ø6.3

M5 x 0.8

Type 23P SY9000 Series

SY9000: SS5Y9-23P- Stations -(D)

Grommet (G)

[ ]: AC

Stations n

173

162.5

144

14.5

114

198

187.5

168

15

138

223

212.5

192

15.5

162

248

237.5

216

16

186

273

262.5

240

16.5

210

298

287.5

264

17

234

323

312.5

288

17.5

258

335.5

325

312

12

282

360.5

350

336

12.5

306

L1

L2

L3

L4

L5

Note) In the case of direct mounting without DIN rail, total width of manifold is L3.

4 stations 5 6 7 8 9 10 11 12 stations

784

785

How to Order Manifold

SS5Y 20SA

Nil

00F

00N

00T

P, R port thread type

04

Rc

G

NPT

NPTF

Nil

N

NPN output (+COM.)

PNP output (–COM.)

SI unit

Symbol

Nil

N

SI unit specifications

NPN output (+COM.)

PNP output (–COM.)

SI unit part no.

EX510-S001

EX510-S101 P.1490

Page

SI unit part no.

3

5

7

SY3000

SY5000

SY7000

Manifold series

Valve stations

• SS5Y3 can be set from 4 stations.

• The number of the blanking plate assembly is also included.

Note 1) Double wiring: Use of a single solenoid will result in an unused

control signal. If this is not desired, order with a specified

layout.

Note 2) Specified layout: Indicate wiring specifications on the manifold

specification sheet. (Note that double and 3 position valves

cannot be used where single solenoid wiring has been

specified.)

Refer to pages 1478 to 1504 and the Operation Manual for the details of

EX510 Gateway-type Serial Transmission System. Please download the

Operation Manual via our website, https://www.smcworld.com

Symbol

03

08

03

16

Stations

3 stations

8 stations

3 stations

16 stations

Note

Double wiring Note 1)

Specified layout Note 2)

(Compatible with 16 solenoid valves)

How to Order Manifold Assembly (Example)

3

Add the valve and option part number under the manifold base part number.

When entry of part numbers becomes complicated, indicate by the manifold

specification sheet. For a manifold for an EX510, the length of the lead wire for a

connector assembly depends on the number of stations. Therefore, the manifold

assembly is shipped with the valves (including blanking plates) and connector

assembly mounted on it, as the standard specification. Be sure to specify the part

nos. of the solenoid valves to be mounted.

The asterisk denotes the symbol for assembly. Prefix to the part no. of the

solenoid valve, etc.

SS5Y3-20SA-06 1 set (20SA type 6-station manifold part no.)

∗ SY3120-5LOU-C6 4 sets (Single solenoid part no.)

∗ SY3220-5LOU-C6 2 sets (Double solenoid part no.)

Cylinder port size

C6: With One-touch

fitting for ø6

Double solenoid (24 VDC)

SY3220-5LOU-C6 (2 sets)

Single solenoid (24 VDC)

SY3120-5LOU-C6 (4 sets)

Manifold base (6 stations)

SS5Y3-20SA-06

Example

Nil

Q CE/UKCA-compliant

CE/UKCA-compliant

—

SY3000/5000/7000 Series

EX510 Gateway-type

Serial Transmission System

Body Ported Manifold/Integrated Base

Type 20SA

... ... ... ...

12

3

Stations

······

···

···

6

7

14

15 9

8

1

0

COM

PWR

EB PEA

[Option]

The EX510 series is to be discontinued. When designing new equipment

and facilities, consider using another series (EX260/EX600) instead.

A 786

20 LO5

Coil specifications

SY 3 1 Z M5

Nil Standard

T With power saving circuit

Gasket

How to Order Valves

3

5

7

SY3000

SY5000

SY7000

Series

1

2

3

4

5

Type of actuation

2 position single

2 position double

3 position closed center

3 position exhaust center

3 position pressure center M5

01

02

Thread piping

A, B port size

M5 x 0.8

1/8

1/4

SY3000

SY5000

SY7000

C4

C6

C4

C6

C8

C8

C10

One-touch fitting (Metric size)

SY3000

SY5000

SY7000

Z

U

Light/Surge voltage suppressor

With light/surge voltage suppressor

With light/surge voltage suppressor

(non-polar type)

Nil

D

E

Manual override

Non-locking push type

Push-turn locking

slotted type

Push-turn locking

lever type

One-touch fitting for ø4

One-touch fitting for ø6

One-touch fitting for ø4

One-touch fitting for ø6

One-touch fitting for ø8

One-touch fitting for ø8

One-touch fitting for ø10

One-touch fitting for ø5/32\"

One-touch fitting for ø1/4\"

One-touch fitting for ø5/32\"

One-touch fitting for ø1/4\"

One-touch fitting for ø5/16\"

One-touch fitting for ø5/16\"

One-touch fitting for ø3/8\"

N3

N7

N3

N7

N9

N9

N11

One-touch fitting (Inch size)

SY3000

SY5000

SY7000

Nil

F

N

T

Rc

G

NPT

NPTF

Thread type

Nil

Q CE/UKCA-compliant

CE/UKCA-compliant

—

Body Ported Manifold SY3000/5000/7000 Series Type 20SA

Note) When placing an order for body ported solenoid valve as a single

unit, mounting screw for manifold and gasket are not attached.

Order them separately, if necessary.

fiGasket assembly part no.

Round head combination screw

Note) The gasket assembly includes

10 sets of mounting screws

and a gasket.

Series Gasket assembly part no.

SY3000-GS-1

SY5000-GS-1

SY7000-GS-1

SY3000

SY5000

SY7000

Note 1) Power saving circuit is only available in

the “Z” type.

Note 2) When the SI unit is the PNP output

(-COM.), only the \"U\" type is available.

Rated voltage: 24 VDC

[Option]

787

- + - + - +

+-

- +

+-

Type 20SA SY3000/5000/7000 Series

SY3000: SS5Y3-20SA - - Stations

L1

L2

4 stations

72.5

64.5

5

85

77

6

97.5

89.5

7

110

102

8

122.5

114.5

9

135

127

10

147.5

139.5

11

160

152

12

172.5

164.5

13

185

177

14

197.5

189.5

15

210

202

16 stations

222.5

214.5

Stations n

(Station n) (Station 1)

(3.2)

C6: 54.1 N7: 57.9

(Light/surge voltage suppressor) 11.9

27.1

49

2026.6

SI unit (Take out when wiring the

connector assembly.)

Connector lock pin

COM

PWR

9

8

1

6 0

7

14

15

44

12.5

23.5 16.5 16.5

49

(M5 port)

(P, EA, EB port)

1/8

B

A

B

A

B

A

B

AEA EB P

EA EBP

18.5

L2

L1

4

P=12.5

(Pitch)

15.5

86.3

16

7.2

1.3 18.4 10.2

39.3

45.7 30.8

77.8

Output no.

ø6, ø1/4\"

Applicable tubing O.D.: ø4, ø5/32\"

(A, B port)

One-touch fitting

(A, B port)

M5 x 0.8

(For mounting)

4 x ø4.5

Manual override

788

+-

- + - + - +

+-

- +

Body Ported Manifold SY3000/5000/7000 Series Type 20SA

SY5000: SS5Y5-20SA - - Stations

L1

L2

3 stations

77

67

4

94.5

84.5

5

112

102

6

129.5

119.5

7

147

137

8

164.5

154.5

9

182

172

10

199.5

189.5

11

217

207

12

234.5

224.5

13

252

242

14

269.5

259.5

16 stations

304.5

294.5

15

287

277

Stations n

(Station n) (Station 1)

21.7

59.5

27.1

13.6

36.2

55.1

26.5

67.4 (4.9)

(Light/surge voltage suppressor)

SI unit (Take out when wiring the

connector assembly.)

Connector lock pin

COM

PWR

9

8

1

6 0

7

14

15

16.5

11.5

(P, EA, EB port)

1/4

30

60 21 21

P=17.5 21

L2 5

L1

(Pitch)

97.3

2.3

16.2 2030

46.1

31.4

33.5

44

93.5 31.4

14.5

EA EB P

B

B

B

B

A

A

A

AEA EBP

Manual override

(For mounting)

4 x ø4.5

(A, B port)

1/8 Output no.

ø8, ø5/16\"

Applicable tubing O.D.: ø4, ø5/32\" (A, B port)

One-touch fitting

ø6, ø1/4\"

789

+-

- +

+-

- + - + - +

Type 20SA SY3000/5000/7000 Series

SI unit

SY7000: SS5Y7-20SA - - Stations

L1

L2

3 stations

88

68

4

108.5

88.5

5

129

109

6

149.5

129.5

7

170

150

8

190.5

170.5

9

211

191

10

231.5

211.5

11

252

232

12

272.5

252.5

13

293

273

14

313.5

293.5

16 stations

354.5

334.5

15

334

314

Stations n

(Station n) (Station 1)

58.5

(5.5) 74.6

26.5

67

27.1

17.9

38.1

(Light/surge voltage suppressor)

(Take out when wiring the

connector assembly.)

Connector lock pin

COM

PWR

0

1

8

15 9

14

7

6

60

30 21 21

16.5

11.5

(P, EA, EB port)

1/4

L1

L2

P=20.5

(Pitch)

23.5

10

(For mounting)

4 x ø4.5

(A, B port)

1/497.3

30 9.4

20

EA EBP

B

B

B

B

A

A

A

A

EB EAP

53.6 40.6 100.6

51.5 38.5 38.5

2119

Manual override

Applicable tubing O.D.: ø8, ø5/16\"

(A, B port)

One-touch fitting

ø10, ø3/8\" Output no.

790

791

SS5Y9

Nil

D

DO

D*

Direct mounting

DIN rail mounting (With DIN rail)

DIN rail mounting (Without DIN rail)

Option

When a longer DIN rail is desired

than the specified stations, specify

the station number to be required

into * mark.

Valve stations

23SA 03

Cylinder port size

C12: With One-touch fitting for ø12

Double solenoid (24 VDC)

SY9220-5LOU-C12 (2 sets)

Single solenoid (24 VDC)

SY9120-5LOU-C12 (3 sets)

Manifold base (5 stations)

SS5Y9-23SA-05

Add the valve and option part number under the manifold base part number.

When entry of part numbers becomes complicated, indicate by the manifold

specification sheet. For a manifold for an EX510, the length of the lead wire for a

connector assembly depends on the number of stations. Therefore, the manifold

assembly is shipped with the valves (including blanking plates) and connector

assembly mounted on it, as the standard specification. Be sure to specify the part

nos. of the solenoid valves to be mounted.

The asterisk denotes the symbol for assembly. Prefix to the part no. of the

solenoid valve, etc.

SS5Y9-23SA-05 1 set (23SA type 5-station manifold part no.)

∗ SY9120-5LOU-C12 3 sets (Single solenoid part no.)

∗ SY9220-5LOU-C12 2 sets (Double solenoid part no.)

Example

SI unit

SY9000 Series

EX510 Gateway-type

Serial Transmission System

Body Ported Manifold/Stacking Type

Type 23SA

How to Order Manifold

Nil

N

NPN output (+COM.)

PNP output (–COM.)

• The number of the blanking plate assembly is also included.

Note 1) Double wiring: Use of a single solenoid will result in an unused

control signal. If this is not desired, order with a specified

layout.

Note 2) Specified layout: Indicate wiring specifications on the manifold

specification sheet. (Note that double and 3 position valves

cannot be used where single solenoid wiring has been

specified.)

Symbol

03

08

03

16

Stations

3 stations

8 stations

3 stations

16 stations

Note

Double wiring Note 1)

Specified layout Note 2)

(Compatible with 16 solenoid valves)

... ... ... ...

Nil

Q CE/UKCA-compliant

CE/UKCA-compliant

—

Nil

00F

00N

00T

P, R port thread type

Rc

G

NPT

NPTF

Symbol

Nil

N

SI unit specifications

NPN output (+COM.)

PNP output (–COM.)

SI unit part no.

EX510-S001

EX510-S101 P.1490

Page

SI unit part no.

Refer to pages 1478 to 1504 and the Operation Manual for the details of

EX510 Gateway-type Serial Transmission System. Please download the

Operation Manual via our website, https://www.smcworld.com

How to Order Manifold Assembly (Example)

123

Stations

·······

···

···

9

8

15

14

7

6

1

0

COM

PWR

[Option]

The EX510 series is to be discontinued. When designing new equipment

and facilities, consider using another series (EX260/EX600) instead.

A 792

Round head combination screw

Gasket

Note) When placing an order for body ported solenoid

valve as a single unit, mounting screw for manifold

and gasket are not attached. Order them separately,

if necessary.

fiGasket assembly part no.

Note) The gasket assembly includes

10 sets of mounting screws

and a gasket.

Series Gasket assembly part no.

SY9000 SY9000-GS-1

Note 1) Power saving circuit is only available in

the “Z” type.

Note 2) When the SI unit is the PNP output

(-COM.), only the \"U\" type is available.

Internal pilot

External pilot

Nil

R

Pilot specifications

02

03

1/4

3/8

C8

C10

C12

One-touch fitting (Metric size)

One-touch fitting for ø8

One-touch fitting for ø10

One-touch fitting for ø12

One-touch fitting for ø5/16\"

One-touch fitting for ø3/8\"

N9

N11

One-touch fitting (Inch size)

How to Order Valves

1

2

3

4

5

Type of actuation

2 position single

2 position double

3 position closed center

3 position exhaust center

3 position pressure center

Z

U

Light/Surge voltage suppressor

With light/surge voltage suppressor

With light/surge voltage suppressor

(non-polar type)

Nil

D

E

Manual override

Non-locking push type

Push-turn locking

slotted type

Push-turn locking

lever type

Nil

Q CE/UKCA-compliant

CE/UKCA-compliant

—

Nil

F

N

T

Rc

G

NPT

NPTF

Thread type

Thread piping

A, B port size

Body Ported Manifold SY9000 Series Type 23SA

Rated voltage: 24 VDC

Coil specifications

Nil Standard

T With power saving circuit

SY9 201 LO5 Z 02

[Option]

793

- +

+-

- +

+-

- + - +

COM

PWR

9

8

1

6 0

7

14

15

Type 23SA SY9000 Series

SY9000: SS5Y9-23SA - - Stations (-D)

Note) In the case of direct mounting without DIN rail, total width of manifold is L3.

3 stations

148

137.5

120

14

90

4

173

162.5

144

14.5

114

5

198

187.5

168

15

138

6

223

212.5

192

15.5

162

7

248

237.5

216

16

186

8

273

262.5

240

16.5

210

9

298

287.5

264

17

234

10

323

312.5

288

17.5

258

11

335.5

325

312

12

282

12

360.5

350

336

12.5

306

13

385.5

375

360

13

330

14

410.5

400

384

13.5

354

16 stations

460.5

450

432

14.5

402

15

435.5

425

408

14

378

L1

L2

L3

L4

L5

Stations n

(Station n) (Station 1)

92.5 (5.5)

51.1

29.6 21.7

83

42.2 31.5

(Take out when wiring the

connector assembly.)

Connector lock pin

SI unit

(13.8) (Height when using DIN rail)

(Light/surge voltage suppressor)

[1(P), 3 (EB), 5(EA) port]

3/8

<When attaching the DIN rail>

Tightening torque: 0.55 to 0.65 N·m

DIN rail holding screw

1P 3EB 5EA

48.3

96.625.5 25.5

13.8

131.1

848.3 33.6 38.1 38.125

L1

L2

L3

L5

(Rail mounting hole pitch: 12.5)

5

(L4)

13.5

15

13.5

X PE

X PE

52 35.5 132.1

83.8 68.2 51.7 51.7

16.3

35

5.5 8

DIN rail

P=24 36

(Pitch)

[4(A), 2(B) port]

1/4,3/8

Manual override Output no.

ø12

ø10, ø3/8\"

Applicable tubing O.D.:

ø8, ø5/16\"

[4(A), 2(B) port]

One-touch fitting

(Pilot EXH port)

<In the case of external pilot type solenoid valve>

M5 x 0.8

(Mounting hole when

DIN rail is not used)

4 x ø6.3

(External pilot port)

M5 x 0.8

2 B A4

B2 A4

B2 A4

2 B A4

794

t t

Type 20 Type 20P Type 20SA

Type 23 Type 23P Type 23SA

Body Ported Manifold SY3000/5000/7000/9000 Series

fi Type 20, 23, 20SA, 23SA

Blanking plate assembly

fi Type 20P, 23P

Blanking plate assembly

fi Gasket assembly part no.

Manifold Option

Gasket

Round head

combination screw

Note) The gasket assembly includes 10 sets

of mounting screws and a gasket.

Series Gasket assembly part no.

SY3000-GS-1

SY5000-GS-1

SY7000-GS-1

SY3000

SY5000

SY7000

SY9000 SY9000-GS-1

Series Assembly part no.

SY3000-26-10A

SY5000-26-21A

SY7000-26-23A

SY3000

SY5000

SY7000

SY9000 SY9000-26-3A

<Standard>

Series Assembly part no.

SY3000-26-20A-Q

SY5000-26-3A-Q

SY7000-26-3A-Q

SY3000

SY5000

SY7000

SY9000 SY9000-26-3A-Q

<CE/UKCA-compliant>

Series Assembly part no.

SY3000 SY3000-26-9A

SY5000 SY5000-26-20A

SY7000 SY7000-26-22A

SY9000 SY9000-26-1A

<Standard>

Series Assembly part no.

SY3000 SY3000-26-19A-Q

SY5000 SY5000-26-1A-Q

SY7000 SY7000-26-1A-Q

SY9000 SY9000-26-1A-Q

<CE/UKCA-compliant>

fi Individual SUP spacer assembly fi Individual EXH spacer assembly

SUP port EXH port

(Both sides)

Series Assembly part no. Port size

SY3000 SY3000-38-20A(-Q) M5 x 0.8

SY5000 SY5000-38-1∗A(-Q)

SY7000 SY7000-38-1∗A(-Q)

1 8

1 4

SY9000 SY9000-38-1∗A(-Q) 1 4

Note) • The SUP port of SY3000/5000/7000 may be either

on the lead wire side or on the end plate side.

However, as the CE/UKCA-compliant products (-Q)

must be mounted in the specified direction, the port

directions cannot be changed. (An assembly is

shipped under the conditions shown in the figure.)

• For the SY9000, it can only be used on the

end plate side.

t

10.5

15

18

20

Series Assembly part no. Port size

M5 x 0.8

t

10.5

15

18

20

SY3000 SY3000-39-20A(-Q)

SY5000 SY5000-39-1∗A(-Q)

SY7000 SY7000-39-1∗A(-Q)

1 8

1 4

SY9000 SY9000-39-1∗A(-Q) 1 4

Note) In case of 20P and 23P, for protection of the

wiring unit section from drainage, piping at

the EA port should be arranged so that it will

not be directly exposed to exhaust from the

valve.

fi Individual SUP spacer assembly

+ Individual EXH spacer assembly

(Double spacer)

(Pilot valve)

(End plate)

Note) The SUP spacer's port does not have an orientation. However, as the

CE/UKCA-compliant products (-Q) must be mounted in the specified

direction, the port directions cannot be changed. As for the EXH ports,

adjust the symbol “5” to the pilot valve side. Also, please make sure to

connect the individual ports to protect the wiring section of the pilot

valve from drainage, etc.

The individual SUP spacer and EXH spacer can be mounted either on

the upper side or lower side. (The above illustration shows the condition

when the product is shipped out from a factory.)

Port size

M5 x 0.8

1/8

1/4

Applicable manifold types

SY3000-120-1A(-Q)

SY5000-75-2∗A(-Q)

SY7000-73-3∗A(-Q)

Individual SUP +

Individual EXH

Assemble part no.

Series

[fi: Available fi: Not available]

20P

fi

fi

fi

20

fi

fi

fi

SY3000

SY5000

SY7000

When mounting a valve or spacer on the manifold

base or sub-plate, etc., those mounting directions

are determined. If mounted in the wrong direction,

the equipment to be connected may cause

malfunction. Refer to external dimensions, and

then mount it.

Warning

∗ Thread type

Rc

NPT

Nil

N

T NPTF

F G

Caution

Mounting screw tightening torques

M2: 0.16 N·m

M3: 0.8 N·m

M4: 1.4 N·m

EXH port

(Both sides)

SUP port

795

Connector

Type 20SA SY3000/5000/7000/9000 Series

Type 23SA

For double solenoid (SY3000-37-81A-fi-fi)

ff Connector assembly

For single solenoid (SY3000-37-81A-fi-N)

Manifold Option

Integrated type

Connector assembly order no. (Can be used for the manifold without a specified layout (8 stations or less))

SS5Y3-20SA

SS5Y5-20SA

SY3000-37-81A-3-N

SY3000-37-81A-3-6

SY3000-37-81A-2-N

SY3000-37-81A-2-4

SY3000-37-81A-3-N

SY3000-37-81A-3-6

SY3000-37-81A-3-N

SY3000-37-81A-3-6

SY3000-37-81A-4-N

SY3000-37-81A-4-7

Single : For 1 to 4 stations

Double/3 position : For 1 to 4 stations

Single : For 5 to 8 stations

Double/3 position : For 5 to 8 stations

Single : For 1 to 8 stations

Double/3 position : For 1 to 8 stations

Single : For 1 to 4 stations

Double/3 position : For 1 to 4 stations

Single : For 5 to 8 stations

Double/3 position : For 5 to 8 stations

Model Part no. Connector mounting position

SS5Y7-20SA

Note) The above is for the station addition or maintenance. When ordering a connector assembly separately, a number would not be printed on the connector.

ff Connector assembly

SY3000-37-80A-fi

ff Housing (8 pcs./set)

SY3000-44-3A

Connector assembly order no. (Can be used for the manifold with a specified layout)

SY3000-37-80A-3

SY3000-37-80A-6

SY3000-37-80A-4

SY3000-37-80A-7

SY3000-37-80A-3

SY3000-37-80A-6

SY3000-37-80A-7

SY3000-37-80A-9

SY3000-37-80A-4

SY3000-37-80A-7

SY3000-37-80A-8

SY3000-37-80A-11

SY3000-37-80A-6

SY3000-37-80A-11

SY3000-37-80A-9

SY3000-37-80A-14

SY3000-37-80A-13

SY3000-37-80A-18

For A side

For B side

For A side

For B side

For A side

For B side

For A side

For B side

For A side

For B side

For A side

For B side

For A side

For B side

For A side

For B side

For A side

For B side

For 1 to 8 stations

For 9 to 16 stations

For 1 to 8 stations

For 9 to 16 stations

For 1 to 8 stations

For 9 to 16 stations

For 1 to 8 stations

For 9 to 12 stations

For 13 to 16 stations

Model Part no. Connector mounting position

SS5Y3-20SA

SS5Y5-20SA

SS5Y7-20SA

SS5Y9-23SA

Note 1) The above is for station addition or maintenance. When ordering a connector assembly separately, a number will not be printed on

the connector.

Note 2) After inserting the connector assembly into the housing, be sure to confirm that the lead wire will not come off by lightly pulling the

wire. Furthermore, do not reuse the lead wire after it has been inserted and removed.

Note 3) Wiring is set longer than the actual wiring distance.

Housing

(Black)

(Red)

Triangle mark

(Red)

(Black) Triangle mark

(Red)

(Black) Connector

(+)

(–)

(–)

(+) Triangle mark

796

6

(15.6)

L

37.5 (26 pins) 26 2

25 1

28AWG Red Terminal no.

L

Body Ported Manifold SY9000 Series Type 20 Type 20P

Type 23 Type 23P

Manifold Option

fi SUP blocking disk (For SY9000) fi Cable assembly (For 20P, 23P)

By installing a SUP blocking disk in the pressure supply passage of a manifold

valve, it is possible to supply two or more different high and low pressures to one

manifold.

AXT100-FC26-

fi EXH blocking disk (For SY9000)

By installing an EXH blocking disk in the exhaust passage of a manifold valve, it

is possible to divide the valve’s exhaust so that it does not affect another valve.

(Two blocking disks are needed to divide both exhausts.)

Series Part no.

SY9000 SY9000-61-2A

Series Part no.

SY9000 SY9000-61-2A

fi Label for blocking disk (For SY9000)

VZ3000-123-1A

The labels shown below are used on manifold stations containing SUP/EXH blocking

disk(s) to show their location. (3 pcs. each)

Label for SUP block disk Label for EXH block disk Label for SUP/EXH block disk

fi DIN Rail Dimensions/Weight for SY9000

∗ When a block disk is concurrently ordered by specifying on the manifold

specification sheet, etc., a label will be stuck on the position where block disk

is mounted.

VZ1000 11 4

Refer to L dimensions

∗ Fill in ff with an appropriate no. listed on the

table of DIN rail dimensions shown below.

Cable length (L)

1.5 m

3 m

5 m

AXT100-FC26-1

AXT100-FC26-2

AXT100-FC26-3

Assembly part no.

26 pins

∗ When using a standard commercial connector, use a 26-pin type connector

conforming to MIL-C-83503 with strain relief.

∗ Cannot be used for movable wiring

∗ Lengths other than the above are also available.

Flat ribbon cable connector

Connector Manufacturers’ Example

• HIROSE ELECTRIC CO., LTD.

• 3M Japan Limited

• Fujitsu Limited

• Japan Aviation Electronics Industry, Limited

• J.S.T. Mfg. Co., Ltd.

• Oki Electric Cable Co., Ltd.

Applicable fittings size ød

4

Model A L D

KQ2P-04 16 32 6

6 KQ2P-06 18 35 8

8 KQ2P-08 20.5 39 10

10 KQ2P-10 22 43 12

12 KQ2P-12 24 44.5 14

KQ2P-01 16 31.5 5

KQ2P-03 16 32 6

KQ2P-07 18 35 8.5

KQ2P-09 20.5 39 10

KQ2P-11 22 43 11.5

Dimensions

5 32\"

1 4\"

5 16\"

3 8\"

1 8\"

(10)

(35) (24)

8

5.5

Rail mounting pitch 12.5

1

2

3

fi Plug

These are inserted in unused cylinder ports and SUP, EXH ports.

Purchasing order is available in units of 10 pieces.

No.

L Dimension

Weight (g)

0

98

24.8

1

110.5

28

2

123

31.1

3

135.5

34.3

4

148

37.4

5

160.5

40.6

6

173

43.8

7

185.5

46.9

8

198

50.1

9

210.5

53.3

10

223

56.4

11

235.5

59.6

12

248

62.7

13

260.5

65.9

14

273

69.1

15

285.5

72.2

16

298

75.4

17

310.5

78.6

18

323

81.7

19

335.5

84.9

No.

L Dimension

Weight (g)

No.

L Dimension

Weight (g)

20

348

88

21

360.5

91.2

22

373

94.4

23

385.5

97.5

24

398

100.7

25

410.5

103.9

26

423

107

27

435.5

110.2

28

448

113.3

29

460.5

116.5

No.

L Dimension

Weight (g)

Note) · For DIN rail, refer to page 959.

· Refer to L1 dimension on pages 775, 784 and 794 for lengths that correspond

to the number of manifold stations.

30

473

119.7

31

485.5

122.8

32

498

126

33

510.5

129.2

34

523

132.3

35

535.5

135.5

36

548

138.6

37

560.5

141.8

38

573

145

797 C

+ −

+ −

− +

!1

re

y

i

o

u

q

w

t

!0

!2!3

Type 23 Type 23P SY9000 Series

How to Increase Manifold Bases (SY9000 series only) Manifold case can be added at any location.

When a type 23 manifold base is added, tension bolts as well as manifold block assembly will be required. Order the tension bolt suitable for the stations after

a station was increased (decreased), since the length of a tension bolt differs by the number of stations. (For changing the number of stations for a type 23P

manifold, wiring unit for the stations and lead assembly will be required.)

1

2

3

4

Caution (Tightening torque: 2.9 N·m)

(When equipped with a DIN rail, be sure to tighten the DIN rail holding screws after tightening the tension bolts. Tightening torque: 1.4 N·m)

Caution

1. Be sure to shut off the power and air supplies before disassembly. Furthermore, since air may remain inside the actuator, piping and

manifold, confirm that the air is completely exhausted before performing any work.

2. When disassembly and assembly are performed, air leakage may result if connections between blocks and tightening of the end

block’s holding screw, is inadequate.

3. By adding wiring unit assembly to type 23 manifold, it can be changed to type 23P manifold, too.

Loosen the tension bolts connecting the manifold base, and pull out both of 2 tension bolts.

(When equipped with a DIN rail, loosen one DIN rail holding screw on either U side or D side.)

Separate the blocks at the location where station expansion is desired.

Mount additional manifold block assembly.

Press block-to-block so that there's no gap. After connection, insert a tension bold for desired stations and then tighten it.

Body Ported Manifold Exploded View, 23/23P Common

As for body ported manifold, it is available only for SY9000 series to disassemble or

increase the manifold.

No.

1

2

3

4

5

6

7

8

9

10

11

12

13

Description

SY9000-50-1A

SY9000-51-2A

SY9000-51-4

SY9000-25-1

SY9000-61-1A

SY9000-61-3A

SY9000-18-2

SY9000-11-1

SY9000-29-1A

VZ1000-11-4-fi

SY9000-36-fiA

SY9000-37-fifi

SY9000-23-fi

Part no. Note

Tension bolt

Replacement Parts

Common use for the internal pilot and external pilot

Common use for the internal pilot and external pilot

M5 x 0.8

Since fi at the end of part number corresponds with the number

of stations, fill in the same number as the number of stations.

Included in the Manifold block assembly and the D side SUP/EXH block assembly.

Included in the Manifold block assembly and the D side SUP/EXH block assembly.

Included in the Manifold block assembly.

Included in the Manifold block assembly.

Refer to page 797.

Since fi in part number corresponds with the number of

stations, fill in the number of stations (4 to 12).

Refer to page 783.

Manifold block assembly

D side SUP/EXH block assembly

U side SUP/EXH block

Hexagon nut

Bush assembly

Bush assembly

Round head combination screw

Manifold gasket

Clamp sub assembly

DIN rail

Wiring unit assembly

Connector assembly

U side

D side

∗ Included only withthe DIN

rail mounting type.

∗ Included only with the DIN rail

mounting type (with DIN rail).

DIN rail holding screw

∗ There is not the case

for direct mount type.

798

799

SS5Y 3 60 05 D

How to Order

Series

SY3000

SY5000

SY7000

3

5

7

Valve stations

2 stations

20 stations

02

20... ...

Note) AC-type models that are

CE/UKCA-compliant

have DIN terminals only.

Nil —

Q CE/UKCA-compliant

CE/UKCA-compliant

Option

When a DIN rail longer than standard is required,

enter the number of manifold stations that

corresponds with the length of DIN rail needed.

Max. 20 stations

SUP/EXH block assembly mounting position

Symbol Mounting position

U side

D side

Both sides

Special location

Applicable stations

2 to 10 stations

2 to 20 stations

∗ For special specifications, indicate separately

by the manifold specification sheet.

U

D

B

M*

How to Order Manifold Assembly (Example)

The asterisk denotes the symbol for assembly. Prefix it to the part nos. of the solenoid valve, etc.

SS5Y3-60-04U 1 set (Type 60, 4-station manifold base part no.)

∗ SY3260-5G-C6 2 sets (Double solenoid part no.)

∗ SY3160-5G-M5 2 sets (Single solenoid part no.)

Add the valve and option part number under the manifold base part number. In the case of complex arrangement,

specify them on the manifold specification sheet.

Type 60 SY3000/5000/7000 Series

5 Port Solenoid Valve

Body Ported Manifold

Cassette Type

·································

·································

·································

Note) AC-type models that are

CE/UKCA-compliant

have DIN terminals only.

P

R

+– +–

Example

P port

C8: With One-touch fitting for ø8

R port

C8: With One-touch fitting for ø8

Manifold base (4 stations)

SS5Y3-60-04U

Single solenoid (24 VDC)

SY3160-5G-M5 (2 sets)

Double solenoid (24 VDC)

SY3260-5G-C6 (2 sets)

Cylinder port size

M5: M5 x 0.8

Cylinder port size

C6: With One-touch fitting for ø6

U side

D side

1 2 n Stations

[Option]

800

Body Ported SY3000/5000/7000 Series Type 60

Manifold Specifications

Model

Applicable valve

Manifold type

P (SUP)/R (EXH)

Valve stations

A, B port location

Port size

P, R port

A, B port

SS5Y3-60(-Q)

SY3fi60

C8 (One-touch fitting for ø8)

M5 x 0.8

C4(One-touch fitting for ø4)

C6 (One-touch fitting for ø6)

SS5Y5-60(-Q)

SY5fi60

C10 (One-touch fitting for ø10)

C4 (One-touch fitting for ø4)

C6 (One-touch fitting for ø6)

C8 (One-touch fitting for ø8)

Stacking type/DIN rail mounted

Common SUP/Common EXH

2 to 20 stations Note 1)

Valve

W = 13n + m + 36 W = 41.2n + m + 77.6

SS5Y7-60(-Q)

SY7fi60

C12 (One-touch fitting for ø12)

1/4

C8 (One-touch fitting for ø8)

C10 (One-touch fitting for ø10)

W = 65.4n + m + 128.2

Flow Rate Characteristics

Manifold base weight W (g) Note 2)

(n: Number of SUP/EXH blocks, m: Weight of DIN rail)

Model

Flow rate characteristics

0.55

0.57

0.68

1.8

1.5

1.8

3.7

3.2

3.7

M5

C4

C6

1/8

C6

C8

1/4

C8

C10

0.29

0.24

0.28

0.24

0.30

0.20

0.25

0.26

0.28

0.14

0.14

0.17

0.44

0.37

0.45

0.96

0.81

0.98

0.72

0.71

0.77

2.1

2.0

2.2

3.8

4.0

4.1

0.24

0.20

0.24

0.17

0.16

0.17

0.19

0.18

0.19

0.18

0.17

0.19

0.47

0.46

0.50

0.94

0.96

1.0

1 → 4/2(P → A/B) 4/2 → 5/3(A/B → R)

Port size

Note) The value is for manifold base with 5 stations and individually operated 2 position type.

SS5Y3-60(-Q)

SS5Y5-60(-Q)

SS5Y7-60(-Q)

C8

C10

C12

C (dm3

/(s·bar)) b Cv C (dm3

/(s·bar)) b Cv

1,5/3

(P,R)

4,2

(A,B)

1/8

Note 1) In cases such as those where many valves are operated simultaneously, use “- station B (SUP/EXH block on both sides)”, applying pressure to the P ports on

both sides and exhausting from the R ports on both sides.

Note 2) For DIN rail weight, refer to page 806.

801

(EA)5 1(P)3(EB)

2(B)(A)4

(EA)5 1(P)3(EB)

2(B)(A)4

(EA)5 1(P)3(EB)

2(B)(A)4

(EA)5 1(P)3(EB)

2(B)(A)4

(A)4 2(B)

1

(P) (EA)5 3(EB)

How to Order Valve

Type 60 SY3000/5000/7000 Series

Note) AC-type models that are CE/UKCA-compliant

have DIN terminals only.

1

2

3

4

5

2 position single

2 position double

3 position closed center

3 position exhaust center

3 position pressure center

Type of actuation

A, B port size

Thread piping

Manual override

Light/Surge voltage suppressor

Electrical entry

24, 12, 6, 5, 3 VDC/100, 110, 200, 220 VAC

L plug connector M plug connector

24, 12, 6, 5, 3 VDC

Grommet M8 connector

Nil

S

Z

Electrical entry for D, Y (SY500/7000 only)

24, 12 VDC/

100, 110, 200, 220 VAC

DIN terminal

D, Y: With

connector

DO, YO: Without

connector

(SY5000, 7000)

∗ For AC voltage valves there is no “S” option. It is

already built-in to the rectifier circuit.

∗ Power saving circuit is only available in the “Z” type.

∗ DOZ and YOZ are not available.

∗ For AC voltage valves there is no “S” option. It is

already built-in to the rectifier circuit.

- +

- +

+-

-+

- +

+-

∗ Power saving circuit is not available in

the case of D, Y, DO, YO or Wfi type.

∗ DC specifications of type D, Y,

DO and YO is only available

with 12 and 24 VDC.

∗ D, Y, DO and YO only available

for SY5000, SY7000.

∗ For type Wfi, DC voltage is

only available.

Note) AC-type models that are

CE/UKCA-compliant have

DIN terminals only.

CE/UKCA-compliant

CE/UKCAcompliant

Manifold

mounting

SY3000

SY5000

SY7000

DC

AC

ff

ff

ff

ff

—

ff

ff

ff

ff

—

ff

ff

ff

ff

—

—

ff

ff

ff

ff

ff

ff

ff

ff

—

Thread type

Note 1) The DIN terminal of the SY3000 series cannot be mounted on a standard manifold. For details, refer to page 958.

Note 2) Enter the cable length symbols in fi. Please be sure to fill in the blank referring to page 961.

Note 3) When ordering single unit of the cassette type solenoid valve, the bushing assembly is included.

∗ LN, MN type: with 2 sockets.

∗ “Y” type is a DIN terminal conforming to EN-175301-803C (former DIN43650C). For details, refer to page 957.

∗ For connector cable of M8 connector, refer to page 960.

∗ M8 connector conforming to IEC60947-5-2 standard is also available. Refer to page 941 for details.

∗ Refer to page 957 for the lead wire length of L and M plug connectors.

∗ Refer to page 958 for the connector assembly with cover for L and M plug connectors.

Wfi: With connector

cable Note 2)

Note 1)

H: Lead wire

length 600 mm

LN: Without

lead wire

LO: Without

connector

MO: Without

connector

G: Lead wire

length 300 mm

L: With lead wire

(Length 300 mm)

M: With lead wire

(Length 300 mm)

MN: Without lead

wire

WO: Without

connector cable

Nil

S

Z

R

U

Without light/surge voltage suppressor

With light/surge voltage suppressor

With light/surge voltage suppressor

With surge voltage suppressor (Non-polar type)

With light/surge voltage suppressor (Non-polar type)

Electrical entry for G, H, L, M, W

Without light/surge voltage suppressor

With surge voltage suppressor (Non-polar type)

With light/surge voltage suppressor (Non-polar type)

Nil: Non-locking

push type

E: Push-turn locking

lever type

D: Push-turn locking

slotted type

One-touch fitting (Metric size)

Symbol

C4

C6

C4

C6

C8

C8

C10

Applicable series

SY3000

SY5000

SY7000

Port size

One-touch fitting for ø4

One-touch fitting for ø6

One-touch fitting for ø4

One-touch fitting for ø6

One-touch fitting for ø8

One-touch fitting for ø8

One-touch fitting for ø10

One-touch fitting (Inch size)

Symbol

N3

N7

N3

N7

N9

N9

N11

Applicable series

SY3000

SY5000

SY7000

Port size

One-touch fitting for ø5/32\"

One-touch fitting for ø1/4\"

One-touch fitting for ø5/32\"

One-touch fitting for ø1/4\"

One-touch fitting for ø5/16\"

One-touch fitting for ø5/16\"

One-touch fitting for ø3/8\"

Note) AC-type models that are

CE/UKCA-compliant have

DIN terminals only.

Nil —

Q CE/UKCA-compliant

Symbol

M5

01

02

Port size

M5 x 0.8

1/8

1/4

Applicable series

SY3000

SY5000

SY7000 ∗ Except for M5

Rc

NPT

Nil

N

T NPTF

F G

Made to Order

—

Main valve fluoro rubber

(Refer to page 942.)

Nil

X90

X20 Body ported external pilot

(Refer to page 942.)

SY 3 1 60 5 L C6

Series SY3000

SY5000

SY7000

3

5

7

Coil specifications

Standard

With power saving circuit (24 VDC, 12 VDC only)

Nil

T

Rated voltage

1

2

3

4

100 VAC

200 VAC

110 VAC [115 VAC]

220 VAC [230 VAC]

5

6

V

S

R

24 VDC

12 VDC

6 VDC

5 VDC

3 VDC

(50/60Hz)

For DC

For AC

[Option]

802

Body Ported SY3000/5000/7000 Series Type 60

Specifications

Solenoid Specifications

Response Time

Fluid

Internal pilot

Operating pressure

range (MPa)

Ambient and fluid temperature (°C)

Max. operating

frequency (Hz)

Manual override

(Manual operation)

Pilot exhaust method

Lubrication

Mounting position

Impact/Vibration resistance Note)

Enclosure

2 position single

2 position double

3 position

2 position double

3 position

Air

0.15 to 0.7

0.1 to 0.7

0.2 to 0.7

Max. 50

Common exhaust type for main and pilot valve

Not required

Unrestricted

150/30

Dust proof (∗ DIN terminal, M8 connector: IP65)

Non-locking push type,

Push-turn locking slotted type,

Push-turn locking lever type

Electrical entry

Coil rated

voltage (V)

Allowable voltage fluctuation

Standard

With power

saving circuit

Power

consumption

(W)

Apparent

power

(VA) ∗

Surge voltage suppressor

Indicator light

DC

AC Hz

AC

100 V

110 V

[115 V]

200 V

220 V

[230 V]

Grommet (G), (H)

L plug connector (L)

M plug connector (M)

DIN terminal (D), (Y)

M8 connector (W)

100, 110, 200, 220

G, H, L, M, W

24, 12, 6, 5, 3

D, Y

24, 12

0.78 (With indicator light: 0.81)

Type of

actuation

2 position single

2 position double

3 position

Response time (ms) (at the pressure of 0.5 MPa)

Without surge voltage

suppressor

With surge voltage suppressor

DC

Series SY3000 SY7000

10

3

5

3

SY5000

5

3

SY3000

12 or less

10 or less

15 or less

S, Z type

15 or less

13 or less

20 or less

R, U type

12 or less

10 or less

16 or less

Type of

actuation

2 position single

2 position double

3 position

Response time (ms) (at the pressure of 0.5 MPa)

Without surge voltage

suppressor

With surge voltage suppressor

SY5000

19 or less

18 or less

32 or less

S, Z type

26 or less

22 or less

38 or less

R, U type

19 or less

18 or less

32 or less

0.1 (With indicator light only) ∗

[Starting 0.4, Holding 0.1]

0.35 [With indicator light: 0.4

(DIN terminal with indicator light: 0.45)]

LED (AC of DIN connector is neon light.)

Type of

actuation

2 position single

2 position double

3 position

Response time (ms) (at the pressure of 0.5 MPa)

Without light/surge

voltage suppressor

With light/surge voltage suppressor

SY7000

31 or less

27 or less

50 or less

S, Z type

38 or less

30 or less

56 or less

R, U type

33 or less

28 or less

50 or less

±10% of rated voltage ∗

Note) Impact resistance: No malfunction occurred when it is tested in the axial

direction and at the right angles to the main valve and

armature in both energized and de-energized states

every once for each condition.

Vibration resistance: No malfunction occurred in a one-sweep test between

45 and 2000 Hz.

Test was performed at both energized and de-energized

states in the axial direction and at the right angles to

the main valve and armature. (Values in the initial

stage)

∗ Based on IEC60529

Note) Based on dynamic performance test, JIS B 8375-1981. (Coil temperature:

20°C, at rated voltage)

∗ In common between 110 VAC and 115 VAC, and between 220 VAC and 230

VAC.

∗ For 115 VAC and 230 VAC, the allowable voltage is –15% to +5% of rated

voltage.

∗ For details, refer to page 955.

50 60

1.30 (With indicator light: 1.34)

[1.42 (With indicator light: 1.46)]

1.18 (With indicator light: 1.22)

0.86 (With indicator light: 0.89)

[0.94 (With indicator light: 0.97)]

0.78 (With indicator light: 0.87)

1.27 (With indicator light: 1.46)

[1.39 (With indicator light: 1.60)]

1.15 (With indicator light: 1.30)

0.86 (With indicator light: 0.97)

[0.94 (With indicator light: 1.07)]

Diode (Varistor is for DIN terminal

and non-polar)

803

Type 60 SY3000/5000/7000 Series

Weight

Valve model Type of actuation

2

position

3

position

2

position

3

position

2

position

3

position

2

position

3

position

2

position

3

position

2

position

3

position

2

position

3

position

2

position

3

position

2

position

3

position

2

position

3

position

Single

Double

Closed center

Exhaust center

Pressure center

Single

Double

Closed center

Exhaust center

Pressure center

Single

Double

Closed center

Exhaust center

Pressure center

51

73

76

61

83

86

57

79

82

49

70

73

62

80

82

55

76

78

M5 x 0.8

C6

One-touch ( ) fitting for ø6

One-touch ( ) fitting for ø4

One-touch ( ) fitting for ø6

One-touch ( ) fitting for ø8

C4

One-touch ( ) fitting for ø4

One-touch ( ) fitting for ø10

One-touch ( ) fitting for ø8

Grommet

L/M plug

connector

55

81

84

65

91

94

61

87

90

M8

Connector

Note) [ ]: denotes normal position.

Single

Double

Closed center

Exhaust center

Pressure center

Single

Double

Closed center

Exhaust center

Pressure center

Single

Double

Closed center

Exhaust center

Pressure center

69

94

100

93

116

122

88

111

117

80

103

109

67

91

97

91

113

119

86

108

114

78

100

106

1/8

C8

C6

SY3000 series

SY5000 series

71

102

108

97

124

130

92

119

125

84

111

117

90

136

142

114

158

164

109

153

159

101

145

151

SY3 60- -M5

SY3 60- -C4

SY3 60- -C6

SY5 60- -01

SY5 60- -C6

SY5 60- -C8

Single

Double

Closed center

Exhaust center

Pressure center

C4

SY5 60- -C4

Valve model Type of actuation

Single

Double

Closed center

Exhaust center

Pressure center

Single

Double

Closed center

Exhaust center

Pressure center

105

128

136

139

163

171

125

149

157

103

125

133

138

160

168

123

145

153

1/4

C10

Grommet

L/M plug

connector

SY7000 series

109

136

144

143

171

179

129

157

165

126

170

178

160

205

213

146

191

199

DIN

terminal

M8

Connector

SY7 60- -02

SY7 60- -C10

Single

Double

Closed center

Exhaust center

Pressure center

C8

SY7 60- -C8

Valve model Type of actuation

Port size

A, B Grommet

L/M plug

connector

DIN

terminal

M8

Connector

Weight (g)

Port size

A, B

Weight (g) Port size

A, B

Weight (g)

804

1(P) 3/5(R) 1(P) 3/5(R)

Individual SUP block assembly

X

1(P) 1(P) 3/5(R) 4(A)2(B) 4(A)2(B) 4(A)2(B) 4(A)2(B)

X

X

EXH blocking disk

X

Individual EXH block assembly

X

3/5(R) 1(P) 3/5(R) 4(A)2(B) 4(A)2(B) 4(A)2(B) 4(A)2(B)

SUP blocking disk

X

Individual SUP block assembly

X

1(P) 1(P) 3/5(R) 4(A)2(B) 4(A)2(B) 4(A)2(B) 4(A)2(B)

X

Individual EXH block assembly

X

1(P) 3/5(R) 3/5(R) 4(A)2(B) 4(A)2(B) 4(A)2(B) 4(A)2(B)

U side D side U side D side

U side D side U side D side

P

R

P

P

Body Ported SY3000/5000/7000 Series Type 60

Manifold Option

fi Individual SUP block assembly fi Individual EXH block assembly

U side

D side

(P port)

Blocking disk

One-touch fitting (Metric size)

Applicable series

SY3000

SY5000

SY7000

Assembly part no.

SY3000-54-2C(-Q)

SY3000-54-1C(-Q)

SY5000-54-1C(-Q)

SY7000-54-1C(-Q)

Port size

One-touch fitting for ø6

One-touch fitting for ø8

One-touch fitting for ø10

One-touch fitting for ø12

One-touch fitting (Inch size)

Applicable series

SY3000

SY5000

SY7000

Assembly part no.

SY3000-54-3C(-Q)

SY5000-54-2C(-Q)

SY7000-54-3C(-Q)

Port size

One-touch fitting for ø5/16\"

One-touch fitting for ø3/8\"

One-touch fitting for ø3/8\"

U side

D side

R port Plug

Blocking disk

One-touch fitting (Metric size)

Assembly part no.

SY3000-55-1B(-Q)

SY5000-55-1B(-Q)

SY7000-55-1B(-Q)

Port size

One-touch fitting for ø8

One-touch fitting for ø10

One-touch fitting for ø12

One-touch fitting (Inch size)

Assembly part no.

SY3000-55-2B(-Q)

SY5000-55-2B(-Q)

SY7000-55-3B(-Q)

Port size

One-touch fitting for ø5/16\"

One-touch fitting for ø3/8\"

One-touch fitting for ø3/8\"

Applicable series

SY3000

SY5000

SY7000

Applicable series

SY3000

SY5000

SY7000

[When supplying the manifold with 2 different supply pressures.]

<Manifold model no.: SS5Y -60-ffff >U 5 D 3 <Manifold model no.: SS5Y -60-ffff >U 5 D 3

[When 2 different EXH passages are required.]

Specify arrangement of individual SUP block assembly on the manifold specification sheet. (When using SS5Yff-60-ffffD, blocking disk is assembled on D side.)

Specify arrangement of individual EXH block assembly on the manifold specification

sheet. (When using SS5Yff-60-ffffD, blocking disk is assembled on D side.)

[When a different supply pressure is required for only a middle valve.] [When a separate exhaust passage is needed on only a middle valve.]

Specify arrangement of individual SUP block assembly and SUP

blocking disk on the manifold specification sheet.

(Applicable manifold model no.: SS5Yff-60-ffffB)

Specify arrangement of individual EXH block assembly and EXH blocking

disk on the manifold specification sheet.

(Applicable manifold model no.: SS5Yff-60-ffffB)

805

P

R

P

R

P

R

P

R

P

R

(7.5)

(35) (25)

(10)

(35) (24)

L

8

5.5

[Rail mounting pitch 12.5]

L

8

5.5

[Rail mounting pitch 12.5]

Series

SY3000 (for ø8)

SY5000 (for ø10)

SY7000 (for ø12)

Model

AN15-C08

AN20-C10

AN30-C12

Effective area mm2

20

30

41

B

20

30.5

43.5

C

45

57.5

71.5

A

ø13

ø16.5

ø20

RR

P

A

B

A

A

B

R

P

P

R R

P

R R

Type 60 SY3000/5000/7000 Series

C

B

øA

ød

sound absorbing material

(Resin sintered body)

Body

(Resin)

Manifold Option

fi SUP blocking disk

By installing a SUP blocking disk in the pressure supply passage of a

manifold valve, it is possible to supply two or more different high and low

pressures to one manifold. (This is the same block disk used with the

individual SUP block assembly.)

Series

SY3000

SY5000

SY7000

Part no.

SY3000-52-6A

SY5000-52-4A

SY7000-70-2A

fi EXH blocking disk

By installing an EXH blocking disk in the exhaust passage of a manifold

valve, it is possible to divide the valve’s exhaust so that it does not affect

another valve. (Two blocking disks are needed to separate both EXH

passages. It is the same block disk that is used in the individual EXH

block assembly.)

Series

SY3000

SY5000

SY7000

Part no.

SY3000-52-6A

SY5000-52-4A

SY7000-70-2A

fi Label for block disk

Label for SUP block disk

The labels shown below are used on manifold stations containing

SUP/EXH blocking disk(s) to show their location. (3 pcs. each)

VZ3000-123-1A

Label for EXH block disk Label for SUP/EXH block disk

∗ When a block disk is concurrently ordered by specifying on the manifold specification

sheet, etc., a label will be stuck on the position where block disk is mounted.

SY3000 SY7000

SY5000

End plate side End plate side

fi Silencer with One-touch fitting

The silencer plugs directly into the One-touch fittings of the manifold.

fi Plug

These are inserted in unused cylinder ports and SUP, EXH ports.

Purchasing order is available in units of 10 pieces.

Applicable fittings size ød

4

6

8

10

12

5/32\"

1/4\"

5/16\"

3/8\"

KQ2P-04

KQ2P-06

KQ2P-08

KQ2P-10

KQ2P-12

KQ2P-03

KQ2P-07

KQ2P-09

KQ2P-11

Model A L D

16

18

20.5

22

24

16

18

20.5

22

32

35

39

43

45.5

32

35

39

43

6

8

10

12

14

6

8.5

10

11.5

Dimensions

øD

L

A

ød

fi DIN Rail Dimensions/Weight for SY3000/5000

VZ1000-11-1-

Refer to the L dimension tables

∗ Enter a number from the DIN rail dimension table below in them.

No.

L dimension

Weight (g)

98

17.6

110.5

19.9

123

22.1

135.5

24.4

148

26.6

160.5

28.9

173

31.1

185.5

33.4

198

35.6

210.5

37.9

No.

L dimension

Weight (g)

223

40.1

235.5

42.4

248

44.6

260.5

46.9

273

49.1

285.5

51.4

298

53.6

310.5

55.9

323

58.1

335.5

60.4

No.

L dimension

Weight (g)

348

62.6

360.5

64.9

373

67.1

385.5

69.4

398

71.6

410.5

73.9

423

76.1

435.5

78.4

448

80.6

460.5

82.9

0 1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19

20 21 22 23 24 25 26 27 28 29

fi DIN Rail Dimensions/Weight for SY7000

VZ1000-11-4-

Refer to the L dimension tables

∗ Enter a number from the DIN rail dimension table below in them.

No.

L dimension

Weight (g)

98

24.8

110.5

28

123

31.1

135.5

34.3

148

37.4

160.5

40.6

173

43.8

185.5

46.9

198

50.1

210.5

53.3

No.

L dimension

Weight (g)

223

56.4

235.5

59.6

248

62.7

260.5

65.9

273

69.1

285.5

72.2

298

75.4

310.5

78.6

323

81.7

335.5

84.9

No.

L dimension

Weight (g)

Note) For DIN rail mounting, refer to page 959.

348

88

360.5

91.2

373

94.4

385.5

97.5

398

100.7

410.5

103.9

423

107

435.5

110.2

448

113.3

460.5

116.5

0 1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19

20 21 22 23 24 25 26 27 28 29

806

(EA)5 1

(P)

3(EB)

2(B)(A)4

(EA)5 1

(P)

3(EB)

2(B)(A)4

(EA)5 1

(P)

3(EB)

2(B)(A)4

(EA)5 1

(P)

3(EB)

2(B)(A)4

(A)4 2(B)

1

(P)

(EA)5 3(EB)

Body Ported SY3000/5000/7000 Series Type 60

Construction

SY series

Symbol 2 position single

2 position single

Symbol 2 position double

2 position double

Symbol 3 position closed center / exhaust center / pressure center

3 position closed center

3 position exhaust center

3 position pressure center

(This figure shows a closed center type.)

( )

No. Description Material

Component Parts

Note

1 Body White

2

3

4

5

Adapter plate

End plate

Piston

Spool valve assembly

Resin

Resin

Resin

Aluminum/H-NBR

White

White

—

—

Aluminum die-casted

SY3000:

Zinc die-casted

No.

6

7

8

Pilot valve assembly

Port block assembly

Bottom cover

assembly Note)

No.

Refer to “How to Order Pilot Valve Assembly” on page 948.

Refer to “How to Order Port Block Assembly” on page 948.

SY3000-41-2A (with screw, gasket)

SY5000-41-2A (with screw, gasket)

Replacement Parts

Note) There is no bottom cover assembly available for SY7000.

Description

(B)

2 (A)

4

5(EA) 1(P) 3(EB)

(B)

2 (A)

4

5(EA) 1(P) 3(EB)

(B)

2 (A)

4

5(EA) 1(P) 3(EB)

wy u q r

i

t

807 B

L3 (L4)

L1

L2

One-touch fitting (Rail mounting hole pitch: 12.5)

(A, B port)

Applicable tubing O.D.: ø4, ø5/32\"

ø6, ø1/4\"

Manual override

M5 x 0.8

(A, B port)

(Light/surge voltage suppressor)

One-touch fitting

(P, R port)

Applicable tubing O.D.: ø8, ø5/16\"

97.3 [101.7] 88.8 [93.2] 44.4 [46.6]

1

38.2 [45.2]

30.7 22.2 22.2

(3) 33.4 28.2 22.8 20.7

(3.2)

(3) 26

C6:43.3 N7:47.1

22.5

33.2

(M5 port)

10.2

4.7

5

35

(Pitch)

P = 10.5 13.5 24.3

8

4.1

5.5

One-touch fitting

(P, R port)

Applicable tubing O.D.: ø8, ø5/16\"

33.2

(M5 port)

(Station n) (Station 1)

4.7

7.5

(Lead wire length) Approx. 300

(Station n) (Station 1)

+- +-+- +- +- +-

U side D side

DIN rail holding screw

DIN rail

A

B

A

B

A

B

A

B

A

B

A

B

R

P

(3.2)

28.2 C6:43.3 N7:47.1 38.2 [45.2] 22.87.5

(Light/surge voltage suppressor)

(3) 33.4 20.7

+- +-+- +- +- +-

U side D side

L3 (L4)

8

5.5 44.4 [46.6] 22.5 35 10.2

1

M5 x 0.8

(A, B port)

24.3 21.3

5

L1

L2

(Rail mounting hole pitch: 12.5)

13.5

(Pitch)

P = 10.5

97.3 [101.7] 88.8 [93.2] 26 30.7 22.2 22.24.1 (3) (Lead wire length) Approx. 300

Manual

override

DIN rail holding screw

DIN rail

R

P

A

B

A

B

A

B

A

B

A

B

A

B

One-touch fitting

(A, B port)

Applicable tubing O.D.: ø4, ø5/32\"

ø6, ø1/4\"

Type 60 SY3000/5000/7000 Series

Dimensions

SS5Y3-60- Stations U

[ ]: AC

Stations

L1

L2

L3

L4

98

87.5

69.5

14

110.5

100

80

15

123

112.5

90.5

16

135.5

125

101

17

135.5

125

111.5

12

148

137.5

122

13

160.5

150

132.5

14

173

162.5

143

15

185.5

175

153.5

16

2 stations 3 4 5 6 7 8 9 10 stations

SS5Y3-60- Stations D

Stations

L1

L2

L3

L4

98

87.5

69.5

14

110.5

100

80

15

123

112.5

90.5

16

135.5

125

101

17

135.5

125

111.5

12

148

137.5

122

13

160.5

150

132.5

14

173

162.5

143

15

185.5

175

153.5

16

2 stations 3 4 5 6 7 8 9 10 stations

808

5

(Light/surge voltage suppressor)

(Station n) (Station 1)

One-touch fitting

(P, R port)

Applicable tubing O.D.: ø8, ø5/16\"

33.2

(M5 port)

4.7

117.1 [121.5] 108.6 [113]

(Lead wire length) Approx. 300

22.8

38.2 [45.2]

54.3

97.5 [101.9] 89 [93.4]

44.5

49.3 [56.3]

(Lead wire length)

Approx. 300 M8 x 1

25.2

42.7

53.4

106.8 115.3 92100.5 46

(3.2)

38.2 [45.2] C6:43.3 N7:47.1 22.8

(3) 33.4 28.2 20.77.5

R

P

R

P

A

B

A

B

A

B

A

B

A

B

A

B

35

1 (3) 26 22.5 5.5

L3 (L4)

8

4.1 24.313.5

L2

(Rail mounting hole pitch: 12.5)

L1

(Pitch)

P = 10.5

44.4 [46.6] 88.8 [93.2] 97.3 [101.7] 30.7 22.2 22.2 10.2

(Lead wire length) Approx. 300

One-touch fitting

(A, B port)

Applicable tubing O.D.: ø4, ø5/32\"

ø6, ø1/4\"

DIN rail holding screw

DIN rail

M5 x 0.8

(A, B port)

Manual override

U side D side

+-+-+- +-+- +-

Body Ported SY3000/5000/7000 Series Type 60

SS5Y3-60- Stations B

[ ]: AC

Stations

L1

L2

L3

L4

2 stations

110.5

100

86

12

3

123

112.5

96.5

13

4

135.5

125

107

14

5

148

137.5

117.5

15

6

160.5

150

128

16

7

173

162.5

138.5

17

8

173

162.5

149

12

9

185.5

175

159.5

13

10 stations

198

187.5

170

14

Stations

L1

L2

L3

L4

11 stations

210.5

200

180.5

15

12

223

212.5

191

16

13

235.5

225

201.5

17

14

235.5

225

212

11.5

15

248

237.5

222.5

12.5

16

260.5

250

233

13.5

17

273

262.5

243.5

14.5

19

298

287.5

264.5

16.5

20 stations

310.5

300

275

17.5

18

285.5

275

254

15.5

L plug connector (L) M plug connector (M) M8 connector (WO)

Note) Refer to page 961 for

dimensions of connector types.

809

5

5 44

(1/8 port)

39.6 [46.6]

5.8

5.8

44

(1/8 port)

39.6 [46.6]

(Station n) (Station 1)

24.2

(4.9) 51.9

(5.5) 43.8 34.5 19.17.5

+- +-+- +- +- +-

R

One-touch fitting

(P, R port)

Applicable tubing O.D.: ø10, ø3/8\" (Light/surge voltage suppressor)

107.2 [111.6] 119.8 [124.2] 51 [53.2] 46.6

(DIN: 47.9)

34 (DIN: 35.3) 28.8 (DIN: 30.1)

14.5 4.7 2.6

L3

L2

(Rail mounting hole pitch: 12.5)

L1

2820 (Pitch)

P = 16

(L4)

(5.5)

5.5 20.7 25.9 30 34.9 35 5.5 16.2

1/8

(A, B port) 8

Manual override (Lead wire length) Approx. 300

Button for DIN rail release

One-touch fitting

(A, B port)

Applicable tubing O.D.: ø4, ø5/32\"

ø6, ø1/4\"

ø8, ø5/16\"

U side D side

DIN rail holding screw

DIN rail

A

B

A

B

A

B

A

B

A

B

A

B

R

P

43.8 34.5 19.1 (5.5)

7.5 24.2

(4.9) 51.9

(Light/surge voltage suppressor)

One-touch fitting

(P, R port)

Applicable tubing O.D.: ø10, ø3/8\"

(Station n) (Station 1)

+-+-+- +-

R +-+-

L1

L2

(Rail mounting hole pitch: 12.5)

L3

(Pitch)

P = 16 24 2028

(L4)

(Lead wire length) Approx. 300

107.2 [111.6] 119.8 [124.2] 51 [53.2] 46.6

(DIN: 47.9) (5.5) 30 34

(DIN: 35.3)

14.5 4.7 2.6 5.535 5.5

28.8

(DIN: 30.1)

34.9 20.7 25.916.2

DIN rail holding screw

DIN rail

8

1/8

(A, B port)

Manual override

One-touch fitting

(A, B port)

Applicable tubing O.D.: ø4, ø5/32\"

ø6, ø1/4\"

ø8, ø5/16\"

Button for DIN rail release

U side D side

A

B

R

P

A

B

A

B

A

B

A

B

A

B

Type 60 SY3000/5000/7000 Series

Dimensions

SS5Y5-60- Stations U

[ ]: AC

Stations

L1

L2

L3

L4

2 stations

123

112.5

88

17.5

3

135.5

125

104

15.5

4

148

137.5

120

14

5

160.5

150

136

12

6

185.5

175

152

16.5

7

198

187.5

168

15

8

210.5

200

184

13

9

235.5

225

200

17.5

10 stations

248

237.5

216

16

SS5Y5-60- Stations D

Stations

L1

L2

L3

L4

2 stations

123

112.5

88

17.5

3

135.5

125

104

15.5

4

148

137.5

120

14

5

160.5

150

136

12

6

185.5

175

152

16.5

7

198

187.5

168

15

8

210.5

200

184

13

9

235.5

225

200

17.5

10 stations

248

237.5

216

16

810

5

(Station n) (Station 1)

44

(1/8 port)

39.6 [46.6]

5.8

137.8 125.2

60

M8 x 1 44.1

26.6

123 110.4

52.6

159.6 147

70.9

53.6

64.9 Max. 10

72.4

Pg7

157.8 145.2

70

Applicable cable O.D.

ø3.5 to ø7

120 [124.4] 107.4 [111.8] 51.1 [53.3]

50.6 [57.6]

(Lead wire length)

Approx. 300

39.6 [46.6]

24.2

60.9 [63.1]

139.6 [144] 127 [131.4]

(Lead wire length) Approx. 300

(Light/surge voltage suppressor)24.2

(4.9) 51.9

(5.5) 43.8 34.5 19.1

7.5

One-touch fitting

(P, R port)

Applicable tubing O.D.: ø10, ø3/8\"

R R +- +- +- +- +- +-

U side D side

One-touch fitting

(A, B port)

Applicable tubing O.D.: ø4, ø5/32\" ø6, ø1/4\"

ø8, ø5/16\"

8 Button for DIN rail release 1/8

(A, B port)

34.9 25.916.2 28.8

(DIN: 30.1)

5.520.7 35 5.5

DIN rail holding screw

DIN rail

(L4)

2820

(Pitch)

P = 16

L1

L2

(Rail mounting hole pitch: 12.5)

L3

107.2 [111.6] 119.8 [124.2]

(Lead wire length) Approx. 300

51 [53.2] 46.6

(DIN: 47.9) (5.5) 30 34 (DIN: 35.3)

4.7

14.5 2.6

Manual override

R

P

R

P

A

B

A

B

A

B

A

B

A

B

A

B

Body Ported SY3000/5000/7000 Series Type 60

SS5Y5-60- Stations B

[ ]: AC

Stations

L1

L2

L3

L4

9 stations

248

237.5

224

12

10

273

262.5

240

16.5

11

285.5

275

256

14.5

12

298

287.5

272

13

13

323

312.5

288

17.5

14

335.5

325

304

15.5

15 stations

348

337.5

320

14

Stations

L1

L2

L3

L4

16 stations

360.5

350

336

12

17

385.5

375

352

16.5

19

410.5

400

384

13

20 stations

435.5

425

400

17.5

18

398

387.5

368

15

Stations

L1

L2

L3

L4

2 stations

135.5

125

112

11.5

3

160.5

150

128

16

4

173

162.5

144

14.5

5

185.5

175

160

12.5

6

210.5

200

176

17.5

7

223

212.5

192

15.5

8 stations

235.5

225

208

13.5

L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO)

Note) Refer to page 961 for

dimensions of connector types.

811

(Station n) (Station 1)

42.5 [49.5]

8

51

(1/4 port)

42.5 [49.5]

8

51

(1/4 port)

(Station n) (Station 1) (5.5) 27.158.6 10

3949.1 25.4 (5.4)

One-touch fitting

[1(P), 3/5(R) port]

Applicable tubing O.D.: ø12, ø3/8\"

(Light/surge voltage suppressor)

3/5 R

+- +- +- +- +- +-

4

A

2

B

4

A

2

B

4

A

2

B

4

A

2

B

4

A

2

B

4

A

2

B

1P

U side D side

L1

L2

(Rail mounting hole pitch: 12.5)

L3

(Pitch)

P = 19 32.522

(L4)

5

(5.4) 38.1 39.4 2828 355.5 20

DIN rail holding screw

8 DIN rail

1/4

[4 (A), 2 (B) port]

One-touch fitting

[4(A), 2(B) port]

Applicable tubing O.D.: ø8, ø5/16\"

ø10, ø3/8\" Manual override (Lead wire length) Approx. 300 121.4 [125.8] 134.4 [138.8] 60.7 [62.9] 51.5 (DIN: 52.8) 38.5 (DIN: 39.8) 38.5 (DIN: 39.8) 19

3/5 R

+- +- +- +- +- +-

(5.4) 49.1 39 25.4 10

(5.5)

27.1

58.6

One-touch fitting

[1(P), 3/5(R) port]

Applicable tubing O.D.: ø12, ø3/8\"

(Light/surge voltage suppressor)

U side D side (Lead wire length) Approx. 300 134.4 [138.8] 121.4 [125.8] 60.7 [62.9] 51.5 (DIN: 52.8) (5.4) 38.1 38.5 (DIN: 39.8) 19

2232.5

L1

L2

(Rail mounting hole pitch: 12.5)

L3 29.5

(Pitch)

P = 19

5

(L4)

1/4

[4 (A), 2 (B) port] 38.5 (DIN: 39.8) 2028 2839.4 355.5

8

DIN rail holding screw

DIN rail

One-touch fitting

[4(A), 2(B) port]

Applicable tubing O.D.: ø8, ø5/16\"

ø10, ø3/8\" Manual override 1P

4

A

2

B

4

A

2

B

4

A

2

B

4

A

2

B

4

A

2

B

4

A

2

B

Type 60 SY3000/5000/7000 Series

Dimensions

SS5Y7-60- Stations U

[ ]: AC

Stations

L1

L2

L3

L4

2 stations

135.5

125

103

16

3

148

137.5

122

13

4

173

162.5

141

16

5

185.5

175

160

12.5

6

210.5

200

179

15.5

7

223

212.5

198

12.5

8

248

237.5

217

15.5

9

260.5

250

236

12

10 stations

285.5

275

255

15

SS5Y7-60- Stations D

Stations

L1

L2

L3

L4

2 stations

135.5

125

103

16

3

148

137.5

122

13

4

173

162.5

141

16

5

185.5

175

160

12.5

6

210.5

200

179

15.5

7

223

212.5

198

12.5

8

248

237.5

217

15.5

9

260.5

250

236

12

10 stations

285.5

275

255

15

812

(Station n) (Station 1)

42.5 [49.5]

27.1 (Lead wire length) Approx. 300 154.2 [158.6] 141.2 [145.6] 70.6 [72.8]

53.6 [60.6]

(Lead wire length)

Approx. 300 121.6 [126] 134.6 [139] 60.8 [63]

172.4 159.4

79.7

Max. 10Pg7

77

69.5

58.2

174.2 161.2

80.6

Applicable cable O.D.

ø3.5 to ø7

152.4 132

69.7

M8 x 1

47

29.5

137.6 124.6

62.3

49.1 39 25.4 (5.4)

10

One-touch fitting

[1(P), 3/5(R) port]

Applicable tubing O.D.: ø12, ø3/8\"

(Light/surge voltage suppressor) (5.5) 27.158.6

42.5 [49.5]

8

51

(1/4 port)

U side D side

134.4 [138.8] 121.4 [125.8]

(Lead wire length) Approx. 300

60.7 [62.9] 51.5

(DIN: 52.8)

19

Manual override

L1

L2

(Rail mounting hole pitch: 12.5)

L3

(Pitch)

P = 19 22 32.5

5

(L4)

(5.4) 38.1 39.4 2828 35

20

5.5

8

DIN rail holding screw

DIN rail

1/4

[4 (A), 2 (B) port]

One-touch fitting

[4(A), 2(B) port]

Applicable tubing O.D.: ø8, ø5/16\"

ø10, ø3/8\"

1P

4

A

2

B

4

A

2

B

4

A

2

B

1P

4

A

2

B

4

A

2

B

4

A

2

B

3/5 R

+- +- +-

3/5 R

+- +- +-

38.5

(DIN: 39.8)

38.5

(DIN: 39.8)

Body Ported SY3000/5000/7000 Series Type 60

SS5Y7-60- Stations B

[ ]: AC

Stations

L1

L2

L3

L4

9 stations

285.5

275

261

12

10

310.5

300

280

15

11

323

312.5

299

12

12

348

337.5

318

15

13

360.5

350

337

11.5

14

385.5

375

356

14.5

15 stations

410.5

400

375

17.5

Stations

L1

L2

L3

L4

16 stations

423

412.5

394

14.5

17

448

437.5

413

17.5

19

485.5

475

451

17

20 stations

498

487.5

470

14

18

460.5

450

432

14

Stations

L1

L2

L3

L4

2 stations

160.5

150

128

16

3

173

162.5

147

13

4

198

187.5

166

16

5

210.5

200

185

12.5

6

235.5

225

204

15.5

7

248

237.5

223

12.5

8 stations

273

262.5

242

15.5

L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO)

Note) Refer to page 961 for

dimensions of connector types.

813

DIN Rail Manifold Exploded View

SY3000

Type 60

Type 60 SY3000/5000/7000 Series

DIN rail

holding screw a

P

R

P

R

U side

D side

Replacement Parts

1

2

3

4

5

6

Valve

SUP/EXH block assembly

End block assembly

End block assembly

Bushing assembly

DIN rail

Part no. Note

fi at the end of part number denotes A. B port size: M5, C4, C6, N3, N7.

Includes bushing assembly (SY3000-52-5A) 3 pcs.

No. Description

SY3fi60-fifi-fi(-Q)

SY3000-55- A(-Q)

SY3000-56-1A(-Q)

SY3000-56-1B(-Q)

SY3000-52-5A

VZ1000-11-1-fi

For D side (Bushing assembly: Not available for SY3000-52-5A)

For U side (Bushing assembly: Not available for SY3000-52-5A)

Refer to page 806.

P, R port (1: One-touch fitting for ø8, 2: One-touch fitting for ø5/16\")

Includes bushing assembly (SY3000-52-5A) 3 pcs. 1

2

814

End plate

PUSH

PUSH

P

R

P

R

Body Ported SY3000/5000/7000 Series Type 60

SY5000

Type 60

DIN rail

holding screw a

U side

D side

Replacement Parts

1

2

3

4

5

6

Part no. Note

fi at the end of part number denotes A. B port size: 01, C4, C6, C8, N3, N7, N9.

Includes bushing assembly (SY5000-52-3A) 3 pcs.

No. Description

SY5fi60-fifi-fi(-Q)

SY5000-55- A(-Q)

SY5000-56-1A(-Q)

SY5000-56-1B(-Q)

SY5000-52-3A

VZ1000-11-1-fi

For D side (Bushing assembly: Not available for SY5000-52-3A)

For U side (Bushing assembly: Not available for SY5000-52-3A)

Refer to page 806.

P, R port (1: One-touch fitting for ø10, 2: One-touch fitting for ø3/8\")

Includes bushing assembly (SY5000-52-3A) 3 pcs. 1

2

How to Add Additional Valves to the DIN Rail Valves can be added at any station on the rail.

1 Loosen the manifold base clamping screw a .

2 Separate the valves at the point where more valves are to be added.

3 Mount the additional valves on the DIN rail as shown in Fig. 1

4 Connect them together while pressing the block assemblies toward each other,

and tighten the holding screw a to fix them to the DIN rail.

Tightening torque

SY3000: 1 N·m

SY5000: 1.4 N·m

Caution

(While lightly holding the blocks after fixing an end block on one side, tighten

the other end block for better sealing after no gap between valves is

confirmed.)

• Bushing assembly must be seated properly to each valve

block in order to prevent air leaks from occurring.

• Refer to the fig. 2 when dismounting the valve from the DIN

rail.

When clamping screw a of the end block is not sufficiently

tightened during reassembly, air leakage may result. Before

supplying air, check that there are no gaps between valves

and that the end block is firmly secured to the DIN rain in order

to ensure air supply without leakage.

Caution

Fig. 1 Manifold mounting procedure Fig. 2 Manifold dismounting procedure

A side

B side

B side

A side

Remove upwards

from side B. Slide it onto side B.

While pressing the bottom of the valve onto the lip of the

DIN rail, pull side B upwards and dismount from the rail.

Hook this part of side B on the DIN

rail and press down in the direction

of the arrow.

Valve

SUP/EXH block assembly

End block assembly

End block assembly

Bushing assembly

DIN rail

815

Type 60 SY3000/5000/7000 Series

SY7000

Type 60

DIN Rail Manifold Exploded View

a DIN rail

holding screw

U side

D side

Replacement Parts

1

2

3

4

5

Part no. Note

fi at the end of part number denotes A. B port size: 02, C8, C10, N9, N11.

Includes bushing assembly (SY7000-70-1A) 3 pcs.

P,R port size (1: ø12 One-touch fitting, 3: 3/8\"One-touch fitting)

Includes bushing assembley (SY7000-70-1A) 3pcs.

No. Description

SY7fi60-fifi-fi(-Q)

SY7000-75- A(-Q)

SY7000-56-1A(-Q)

SY7000-70-1A

VZ1000-11-4-fi

In common for D side and U side (Bushing assembly: Not available for SY7000-70-1A.)

Refer to page 806.

1

3

How to Add Additional Valves to the DIN Rail Valves can be added at any station on the rail.

Fig. 1 Manifold mounting procedure Fig. 2 Manifold dismounting procedure

Slide it onto side A.

Remove upwards

from side A.

A side

B side

A side

B side

While pressing the B side stopper

onto the DIN rail, insert into the rail.

While pressing the bottom of the

valve onto the lip of the DIN rail,

pull side A upwards and dismount

from the rail.

When clamping screw a of the end block is not sufficiently

tightened during reassembly, air leakage may result. Before

supplying air, check that there are no gaps between valves

and that the end block is firmly secured to the DIN rain in

order to ensure air supply without leakage.

Caution

1 Loosen the rail holding screw a at both of 2 locations which holds

the manifold base either in the U side or D side.

2 Separate the valves at the point where more valves are to be

added.

3 Mount the additional valves on the DIN rail as shown in Fig. 1.

4 Connect them together while pressing the block assemblies toward each

other, and tighten the 2 holding screws a for DIN rail alternately (2 to 3

times) with the prescribed torque (1.4 N·m) to fix them to the DIN rail.

When removing the end block assembly from the DIN rail, loosen the

holding screws for DIN rail at first, then slide it to the edge of the rail.

Tightening torque

SY7000: 1.4 N·m

Caution

(While lightly holding the blocks after fixing an end block on one side,

tighten the other end block for better sealing after no gap between valves

is confirmed.)

• Bushing assembly must be seated properly to each valve

block in order to prevent air leaks from occurring.

• Refer to the fig. 2 when dismounting the valve from the DIN

rail.

Valve

SUP/EXH block assembly

End block assembly

Bushing assembly

DIN rail

816

817

-+ -+

A

B

EB

P

EA

Type 41/Compact type

Type 42/External pilot capable

SS5Y 5 41 05 C8

SS5Y 5 42 05 C8

Nil —

Q CE/UKCA-compliant

CE/UKCA-compliant

How to Order Manifold

3 SY3000

5 SY5000

Manifold series

...

2 stations

20 stations

... 02

20

Stations

Rc

NPT

Nil

N

T NPTF

F G

Thread type

∗ Except for M5

Symbol Port size

M5 x 0.8 SY3000

Applicable series

SY5000

M5

01 1 8

Thread piping

A, B port size

One-touch fitting (Metric size)

Symbol Port size Applicable series

SY3000

SY5000

C4 One-touch fitting for ø4

C6 One-touch fitting for ø6

C6 One-touch fitting for ø6

C8 One-touch fitting for ø8

One-touch fitting (Inch size)

Symbol Port size Applicable series

SY3000

SY5000

N3 One-touch fitting for ø

N7 One-touch fitting for ø

N7 One-touch fitting for ø

N9 One-touch fitting for ø

5 32\"

1 4\"

1 4\"

5 16\"

3 SY3000

5 SY5000

7 SY7000

Manifold series

...

2 stations

20 stations

... 02

20

Stations

Rc

NPT

Nil

N

T NPTF

F G

Thread type

Symbol Port size

SY3000

Applicable series

SY5000

01

02 1 4

02 1 4 SY7000

1 8

Thread piping

A, B port size

One-touch fitting (Metric size)

Symbol Port size Applicable series

SY3000

SY5000

C4 One-touch fitting for ø4

C6 One-touch fitting for ø6

C6 One-touch fitting for ø6

C8 One-touch fitting for ø8

One-touch fitting (Inch size)

Symbol Port size Applicable series

SY3000

SY5000

SY7000 SY7000

N3 One-touch fitting for ø

N7 One-touch fitting for ø

N7 One-touch fitting for ø

N9 One-touch fitting for ø

5 32\"

1 4\"

1 4\"

5 16\"

C10 One-touch fitting for ø10 N11 One-touch fitting for ø3 8\"

How to Order Manifold Assembly (Example)

SS5Y3-41-05-C6 1 set (Type 41, 5-station manifold base part no.)

∗ SY3240-5G 2 sets (Double solenoid part no.)

∗ SY3140-5G 2 sets (Single solenoid part no.)

∗ SY3000-26-9A 1 set (Blanking plate assembly part no)

The asterisk denotes the symbol for assembly.

Prefix it to the part nos. of the solenoid valve, etc.

Example

Add the valve and option part number under the manifold base part

number. In the case of complex arrangement, specify them on the manifold

specification sheet.

SY3140-5G (2 sets)

Single solenoid (24 VDC)

SY3240-5G (2 sets)

Double solenoid (24 VDC)

SY3000-26-9A (1 set)

Blanking plate assembly

SS5Y3-41-05-C6

Manifold base (5 stations)

C6: With One-touch fitting for ø6

Cylinder port size

3 2 1 Stations

···

············

············

·······

Note) AC-type models that are

CE/UKCA-compliant have

DIN terminals only.

Type 42

Type 41

SY3000/5000/7000 Series

Note) AC-type models that are

CE/UKCA-compliant

have DIN terminals only.

5 Port Solenoid Valve

Base Mounted Manifold

Bar Stock Type/Individual Wiring

∗ This also includes the

number of blanking

plate assemblies.

∗ This also includes the

number of blanking

plate assemblies.

Nil —

Q CE/UKCA-compliant

CE/UKCA-compliant

Note) AC-type models that are

CE/UKCA-compliant have

DIN terminals only.

[Option]

818

Electrical entry for G, H, L, M, W

Nil Without light/surge voltage suppressor

S

Z

With surge voltage suppressor

With light/surge voltage suppressor

R With surge voltage suppressor (Non-polar type)

U With light/surge voltage suppressor (Non-polar type)

Electrical entry for D, Y

Nil Without light/surge voltage suppressor

S

Z

With surge voltage suppressor (Non-polar type)

With light/surge voltage suppressor (Non-polar type)

∗ For AC voltage valves there is no “S” option. It is already

built-in to the rectifier circuit.

∗ For “R” and “U”, DC voltage is only available.

∗ Power saving circuit is only available in the “Z” type.

∗ DOZ and YOZ are not available.

∗ For AC voltage valves there is no “S” option. It is already

built-in to the rectifier circuit.

Light/Surge voltage suppressor

5 24 VDC

6 12 VDC

V 6 VDC

S 5 VDC

R 3 VDC

For AC ( Hz)

For DC

1 100 VAC

2 200 VAC

3 110 VAC [115 VAC]

4 220 VAC [230 VAC]

50 60

∗ DC specifications of Type D, Y, DO and YO

is only available with 12 and 24 VDC.

∗ For type Wfi, DC voltage is only available.

Note) AC-type models that are CE/UKCA-compliant

have DIN terminals only.

SY 5 2 40 5 L

Nil —

X90 Main valve fluororubber (Refer to page 942.)

Made to Order

CE/UKCA-compliant

Note) AC-type models that are

CE/UKCA-compliant

have DIN terminals only.

Nil —

Q CE/UKCA-compliant

3 SY3000

5 SY5000

7 SY7000

Series

How to Order Valve

1 2 position single

2 2 position double

3 3 position closed center

4 3 position exhaust center

5 3 position pressure center

Type of actuation

Nil Internal pilot

R External pilot

Pilot type

∗ Power saving circuit is not available in

the case of D, Y, DO, YO or Wfi type.

Nil Standard

T With power saving circuit

(24 VDC, 12 VDC only)

Coil specifications

Nil Non-locking push type

D Push-turn locking slotted type

E Push-turn locking lever type

Manual override

CE/UKCAcompliant

Manifold

mounting

SY3000

SY5000

SY7000

DC

AC

Grommet

24, 12, 6, 5, 3 VDC/100, 110, 200, 220 VAC

24, 12 VDC/

100, 110, 200,

220 VAC

L plug connector M plug connector DIN terminal

Note 1) The DIN terminal of the SY3000 series cannot be mounted on a standard manifold. For details, refer to page 958.

Note 2) Enter the cable length symbols in fi. Please be sure to fill in the blank referring to page 961.

∗ LN, MN type: with 2 sockets.

∗ “Y” type is a DIN terminal conforming to EN-175301-803C (former DIN43650C). For details, refer to page 957.

∗ For connector cable of M8 connector, refer to page 960.

∗ M8 connector conforming to IEC60947-5-2 standard is also available. Refer to page 941 for details.

∗ Refer to page 957 for the lead wire length of L and M plug connectors.

∗ Refer to page 958 for the connector assembly with cover for L and M plug connectors.

Electrical entry

24, 12, 6, 5, 3 VDC

M8 connector

G: Lead wire length

300 mm lead

H: Lead wire length

600 mm

ff

ff

ff

ff

—

ff

ff

ff

ff

—

ff

ff

ff

ff

—

ff

ff

ff

ff

—

—

ff

ff

ff

ff

L: With lead wire

(Length 300 mm)

LN: Without lead wire

LO: Without connector

M: With lead wire

(Length 300 mm)

MN: Without lead wire

MO: Without connector

(SY5000/7000 only)

D: With connector

DO: Without connector

Y: With connector

YO: Without connector

WO: Without connector

cable

Wfi: With connector

cable Note 2)

Base Mounted SY3000/5000/7000 Series Type 41 Type 42

Note) AC-type models that are CE/UKCA-compliant

have DIN terminals only.

Note) When ordering single unit of the base mounted type solenoid valve, the mounting screws and gaskets for the manifold are included.

Rated voltage

Note 1)

[Option]

819

Type 41 Type 42 SY3000/5000/7000 Series

Manifold Specifications

Flow Rate Characteristics

Model

Applicable valve

Manifold type

P(SUP)/R(EXH)

Valve stations

A, B port

Porting specifications

Port

size

Manifold base weight

W (g) n: Stations

Location

Direction

A, B port

P, EA, EB port

SS5Y3-41(-Q) SS5Y3-42(-Q) SS5Y5-41(-Q) SS5Y5-42(-Q) SS5Y7-42(-Q)

SY3fi40 SY5fi40 SY7fi40

Single base/B mount

Common SUP, Common EXH

2 to 20 stations Note 1)

Base

Side

1 8

1 8 1 8 1 4 1 4

1 4 1 4

M5 x 0.8,

C4 (One-touch fitting for ø4)

C6 (One-touch fitting for ø6)

C4 (One-touch fitting for ø4)

C6 (One-touch fitting for ø6)

C6 (One-touch fitting for ø6)

C8 (One-touch fitting for ø8)

C6 (One-touch fitting for ø6)

C8 (One-touch fitting for ø8) C10 (One-touch fitting for ø10)

W = 30n + 50 W = 37n + 63 W = 61n + 101 W = 79n + 127 W = 100n + 151

Note 1) For more than 10 stations (more than 5 stations in case of SS5Y7), supply pressure to P port on

both sides and exhaust from EA/EB port on both sides.

Note 2) Refer to “Manifold Option” on page 858.

1 8

1 8

C6

C6

1 4 C8

Model 1, 5, 3

(P, EA, EB)

4, 2

(A, B)

1 fi 4/2 (P fi A/B) 4/2 fi 5/3 (A/B fi EA/EB)

Port size Flow rate characteristics

C (dm3/ (s·bar) ) b Cv C (dm3/ (s·bar) ) b Cv

SS5Y3-41(-Q)

SS5Y3-42(-Q)

SS5Y5-41(-Q)

SS5Y5-42(-Q) 1 4 C8

C10

0.75

0.75

1.8

1.9

3.0

0.19

0.20

0.23

0.20

0.25

0.18

0.18

0.44

0.46

0.75

0.81

0.82

1.9

1.9

3.0

0.23

0.20

0.16

0.12

0.12

0.20

0.20

0.45

0.43

SS5Y7-42(-Q) 1 4 0.66

Note) The value is for manifold base with 5 stations and individually operated 2 position type.

820

- + - + - + - +

A A

B B

A A

B B

B

A

B

A

B

A

B

A

B

A

EA EB P

B

A

B

A

B

A

EA EB P

EA EB

P

EA EB

P

(Station 1) (Station n)

4 x ø4.5

(For mounting)

14 (Pitch)

P = 10.5

57.5 [64.5]

42.1

108.6 [113] 117.1 [121.5] Approx. 300 (Lead wire length)

Approx. 300

(Lead wire length)

68.6 [75.6]

89 [93.4] 97.5 [101.9]

M8 x 1

62

44.5

115.3 106.881.2

92 100.5

57.5 [64.5] 42.1 10.5 7 (Pitch)

P = 10.5

6.5 20.7 28.5

(Light/surge voltage suppressor)

One-touch fitting

(A, B port)

Applicable tubing O.D. : ø4, ø5/32\" : ø6, ø1/4\"

For M5

57.5 [64.5] 42.1 10.5 7 (Pitch)

P = 10.5

6.5 20.7 28.5

M5 x 0.8

(A, B port)

(Light/surge voltage suppressor)

97.3 [101.7]

(Lead wire length) Approx. 300

Manual

override 2.9

88.8 [93.2] 1622.650.1 72.3 [74.5] 5.7

(Pitch)

14 P = 10.5

L2

L1

4

8.5

13.6

15.5 15.5

(3.2)

1/8

(P, EA, EB port)

ø15

16

4 x ø4.5

(For mounting)

72

(7) With plug 53.8

72.5 [79.5]

28.5

36.5

30.653.8

22.6

111.4

(29.4) 124.9

82.2 [84.4] 72.4 [74.6] 74.9

SY3000: SS5Y3-41- Stations -M5,

Grommet (G) With interface regulator (with gauge)

C4,N3

C6,N7 [ ]: AC

L1

L2

2 stations

38.5

30.5

3

49

41

4

59.5

51.5

5

70

62

6

80.5

72.5

7

91

83

8

101.5

93.5

9

112

104

10

122.5

114.5

11

133

125

12

143.5

135.5

13

154

146

14

164.5

156.5

15

175

167

16

185.5

177.5

17

196

188

18

206.5

198.5

19

217

209

20 stations

227.5

219.5

Stations n

Base Mounted SY3000/5000/7000 Series Type 41

L plug connector (L) M plug connector (M) M8 connector (WO)

Note) Refer to page 961 for

dimensions of connector types.

821

A

B

A

B

A

B

A

B

A

B

P EA EB

- + - +

A

B

A

B

A

B

A

B

A

B

- + - +

A

B

A

B

P EA EB

P EA EB EB EA P EB EA P

(14.5) With plug 66.8

46.2

61.6 [68.6]

127 [131.4] 100.3 [102.5] 139.6 [144] Approx. 300 (Lead wire length)

72.7 [79.7]

(Lead wire length)

Approx. 300

107.4 [111.8] 120 [124.4] 90.5 [92.7]

Max. 10

Applicable cable O.D.

ø3.5 to ø7

Pg7

94.4

86.9

75.6

157.8 145.2109.4 159.6 147110.3

66.1

48.6

M8 x 1 137.8 125.299.4 110.4 12392

For 1 8

(Light/surge voltage suppressor)

61.6 [68.6] 46.2

(Pitch) 15.5 P = 16

9

1/8

(A, B port)

33 23

7.5

33

C6, N7: 23 C8, N9: 23.5

7.5

61.6 [68.6] 46.2

One-touch fitting

(A, B port)

Applicable tubing O.D.: ø6, ø1/4\" ø8, ø5/16\"

(Pitch)

P = 16

C6, N7: 9

C8, N9: 7.5

C6, N7: 15.5

C8, N9: 17

(Light/surge voltage suppressor)

2027.8

18.5 (Pitch)

P = 16

(50.2) 106.8

4 x ø4.5

(For mounting)

ø15

33

45

84.6 [91.6]

119.8 [124.2] 68.2

(DIN: 69.5)

5.4

(DIN: 4.1)

7.3 (DIN: 8.6)

18.5

5.5

(Pitch)

P = 16

L2

L1

(Station 1) (Station n)

4 x ø4.5

(For mounting) (Lead wire length) Approx. 300

90.4 [92.6] 107.2 [111.6] 2027.8

Manual override

P EA EB

1/4

(P, EA, EB port) 2020 37.866.8

15.2

13.8 (4.9)

L1

L2

2 stations

52.5

42

3

68.5

58

4

84.5

74

5

100.5

90

6

116.5

106

7

132.5

122

8

148.5

138

9

164.5

154

10

180.5

170

11

196.5

186

12

212.5

202

13

228.5

218

14

244.5

234

15

260.5

250

16

276.5

266

17

292.5

282

18

308.5

298

19

324.5

314

20 stations

340.5

330

Stations n

Type 41 SY3000/5000/7000 Series

With interface regulator (with gauge)

L plug connector (L) M plug connector (M) DIN terminal (D, Y) M8 connector (WO)

Note) Refer to page 961 for

dimensions of connector types.

SY5000: SS5Y5-41- Stations -01,

Grommet (G)

C6, N7

C8, N9 [ ]: AC

822