该页无缩略图
GLASSDOOR CLAMP CASERIES
玻璃门夹CA系列
Model no:M-508
Model no:M-508
Model no:M-508
DILIGENTQUALITYWINTHEFUTURETOGETHER
用心品质，共赢未来
Glassto glass Model no:AC-L529A
FLOORSPRING
| 产品图 Product picture | 产品型号 Productnumber | 最大门宽（mm） Widthof doormax (mm) | 最大门重（kg） (kg) | 开门速度 Weight of door max Door opening speed | 开启角度 Openingangle | 使用寿命 Passed durability test |
| AC-50D | 1000mm | 95kg | 二段 | 116° | 500,000次/Cycles | |
| AC-65D | 1000mm | 105kg | 二段 | 116° | 500,000次/Cycles | |
| AC-84D | 1100mm | 135kg | 二段 | 116° | 500.000次/Cycles | |
| AC-75D | 1000mm | 100kg | 二段 | 116° | 500,000次/Cycles | |
| AC-800D | 1000mm | 100kg | 二段 | 116°-360° | 500,000次/Cycles | |
| MA-7135 | 1000mm | 100kg | 二段 | 116° | 500,000次/Cycles | |
| MA-7300 | 1000mm | 100kg | 二段 | 116° | 500,000次/Cycles |
| 产品图 Productpicture | 产品型号 Product number | 最大门宽（mm） Widthof doormax (mm) | 最大门重（kg） (kg) | 开门速度 Weightof door max Dooropening speed | 开启角度 Openingangle | 使用寿命 Passeddurability test |
| MA-2500 | 1000mm | 100kg | 二段 | 116° | 500.000次/Cycles | |
| MA-2600 | 1000mm | 100kg | 二段 | 116° | 500.000次/Cycles | |
| AC-8300K | 1000mm | 100kg | 二段 | 116° | 500,000次/Cycles | |
| AC-533N | 1200mm | 100kg | 二段 | 116° | 500,000次/Cycles |
DOORCLOSER List of ground springs
地弹簧目录
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Draw linesand make floor spring pivot center and door-nip pivot coincide witheach other. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed with door-nip,and insert the floor spring pivot intothe hole fo the door leaf.
(E)Adjustthescrewsatthreedirections.Makethemverticalandtheupperandlowerpivotcenter coincidewitheachother.
(F)Adjustthe speedof door closing.
(G)Put the decoration cover on the floor spring
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) | |
| 最大门t(kgor max(kg) | 95 . |
| 开门速pning speed | |
| 开p启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) 宽/Width | 250 100 |
| Dimension of cement box(mm) 高/Height | |
| 使用寿命 500.000次/Cycles | |
地弹簧尺寸配件图 Assembling picture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Draw linesand make floor spring pivot center and door-nip pivot coincide witheach other. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust thescrewsat three directions.Make them vertical andtheupper andlower pivotcenter coincidewitheachother.
(F) Adjustthe speedof door closing.
(G)Puthe decoration cover onthe floor spring
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) | |
| 最大门t(kgor max(kg) | 105 |
| 开门速pning speed | |
| 开p启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 276 108 |
| 宽/Width Dimension of cement box(mm) 高/Height | |
| 使用寿命 500.000次/Cycles | 40 |
地弹簧尺寸配件图 Assembling picture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Draw linesand make floor spring pivot center and door-nip pivot coincide witheach other. (B)Drillholes ontheflooraccording totheinstructions,Thesizes of theholesmusttightlymatchfloor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjustthescrewsatthreedirections.Makethemverticalandtheupperandlowerpivotcenter coincide with each other.
(F)Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring
Model no:AC-84D 豪华耐用型 Luxuriousanddurable
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1100 |
| Width of door max(mm) | |
| 最大门重（kg) Weight of door max(kg) | 120 |
| 开门速pning speed | |
| 开启角度 Opening angle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 309 宽/Width 108 |
| Dimension of cement box(mm) 高/Height | |
| 使用寿命 500,000次/Cycles | 40 |
地弹簧尺寸配件图 Assembling picture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Draw linesand make floor spring pivot center and door-nip pivot coincide witheachother. (B)Drillholesontheflooraccording totheinstructions,Thesizesoftheholesmusttightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed withdoor-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust the screwsat three directions.Make them vertical andtheupper and lower pivot center coincidewitheachother.
(F) Adjustthe speedof door closing.
(G)Puthe decoration cover onthe floor spring
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) | |
| 最大门重t(kgor max(kg) | 150 |
| 开门速pning speed | |
| 开p启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 285 宽/Width 82 |
| Dimension of cement box(mm) 高/Height | |
| 使用寿命 500.000次/Cycles | 50 |
地弹簧尺寸配件图 Assembling picture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Draw linesand make floor spring pivot center and door-nip pivot coincide witheach other. (B)Drillholes ontheflooraccording totheinstructions,Thesizesof theholesmusttightlymatchfloor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjustthescrewsatthreedirections.Makethemverticalandtheupperandlowerpivotcenter coincide with each other.
(F) Adjustthe speedof door closing.
(G)Put the decoration cover onthe floor spring
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) | |
| 最大门t(kgor max(kg) | 300 |
| 开门速pning speed | |
| 开启角度 | 116°-360° |
| Opening angle 长/Length | |
| 铁壳尺寸(mm) | 340 宽/Width 82 |
| Dimension of cement box(mm) 高/Height | |
| 使用寿命 500,000次/Cycles | 60 |
地弹簧尺寸配件图 Assembling picture of floor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Draw linesand make floor spring pivotcenterand door-nip pivotcoincide witheachother. (B)Drillholes onthefloor according totheinstructions,Thesizesoftheholesmust tightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the doorleaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjustthescrewsatthreedirections.Makethemverticalandtheupperandlowerpivotcenter coincide with each other.
(F)Adjustthe speedof door closing.
(G)Puthe decoration cover onthe floor spring
| 技术参数 | Technical parameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) | |
| 最大门重（kg) Weight of door max(kg) | 100 |
| 开门速pning speed | |
| 开启n角gangle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 222 105 |
| 宽/Width Dimension of cement box(mm) | |
| 高/Height 使用寿命 | 55 |
地弹簧尺寸配件图 Assemblingpicture offloor hinge series
(A)画线，使地弹簧转轴中心与门夹转轴重合。
(B)根据说明书和实物在地面开孔，孔的大细要与地弹簧壳体配紧，不能松动。 (C)将地弹簧放放开好的孔内，摆正。
(D)抬起装好门夹的门风扇，使地弹簧的转轴插入门扇的转动轴孔内。
(E)调节地弹簧三个方向的螺丝，保持门扇垂直，及上下转动轴重合。
(F)调节开门速度。
(G)盖上地弹簧装饰盖。
(A)Draw linesand make floor spring pivotcenterand door-nip pivot coincide witheach other. (B)Drillholesonthefloor according totheinstructions,Thesizesoftheholesmust tightlymatch floor spring.
(C)Place the floor spring into the holes and position it.
(D)Raise the door leaf installed with door-nip,and insert the floor spring pivot into the hole fo the door leaf.
(E)Adjust thescrewsat three directions.Make them vertical andtheupper andlower pivotcenter coincidewitheachother.
(F)Adjustthespeedofdoorclosing.
(G)Put the decoration cover on the floor spring
| 技术参数 | Technicalparameters: |
| 力量级别 Power size | |
| 最大门宽(mm) | 1000 |
| Width of door max(mm) | |
| 最大门重（kg) Weight of door max(kg) | 100 |
| 开门速pning speed | |
| 开ngngle | 116° |
| 长/Length | |
| 铁壳尺寸(mm) | 275 125 |
| 宽/Width Dimension of cement box(mm) | |
| 高/Height 使用寿命 | 65 |
