ABB公司EL3020，L3040气体分析仪ABBEL3020，EL3040GasAnalyzer

有以下型号的分析仪可供选择：

Theanalyzersare madein ABB,the following analyzersareavailableforselection:

Uras26红外分析仪用于测量红外特性气体组分的分析，例如CO、 \mathsf { C O } _ { 2 } 、NO、 \mathsf { S O } _ { 2 } 、CH等。
·Magnos28磁氧分析仪用于测量过程气体中的氧或者氮中氧。
·Caldos27热导式分析仪用于测量具有不同热导率的二元混合气体，如氧中氩、氩中氢、氮中甲烷。
·电化学式氧传感器用于测量氧气，并且它只能与Uras26红外分析仪一起使用
·Fidas24分析仪用于测量碳氢化合物，采用火焰离子检测器原理
·ZO23分析仪用于测量纯气（N2、 \mathsf { C O } _ { 2 } 、Ar）中的氧气
·Uras26 Infrared Analyzer for the measurementof infrared-active gas components e.g.CO, \mathsf { C O } _ { 2 } , NO, S \mathsf { O } _ { 2 } C H _ { 4 }
·Magnos28Paramagnetic Oxygen Analyzer forthe measurement of { O } _ { z } in process gas or in N _ { 2 }
·Caldos27 Thermal Conductivity Analyzer for themeasurement of binary gasmixtureswith differentthermal conductivity e.g.Ar in { O } _ { z } , （20号 H _ { 2 } in Ar, C H _ { 4 } in { \sf N } _ { z } , （204号
·Electrochemical oxygensensorforthemeasurementof { O } _ { 2 } The electrochemical oxygen sensor can onlybe used in combination with the Uras26 infrared.
Fidas24analyzer is formeasurement hydrocarbon,and use flame lionization detector principle.
·Zo23 analyzer is for measurement oxygen in puregas ( \mathsf { N } _ { 2 } \mathsf { C O } _ { 2 } , Ar).

ABB公司A02020，AO2040气体分析仪ABBAO2020，AO2040 GasAnalyzer

有以下型号的分析仪可供选择：

·Uras26红外分析仪用于测量红外特性气体组分的分析，例如CO、 \mathsf { C O } _ { 2 } 、NO、 \mathsf { S O } _ { 2 } ， C H _ { 4 } 、NH等。
·Limas11紫外线分析仪的测量原理是基于气体过滤的相关性或在紫外线和可见光谱范围波长 λ { = } 2 0 0 { { - } } 6 0 0 \mathsf { n m } (Limas11UV)和红外线光谱范围 λ { = } 2 . 5 { - } 1 0 \mu { m } (Limas11IR)的测量.如Limas11UV测量NO， { \mathsf { S O } } _ { 2 } , N \mathsf { O } _ { 2 } （20 { \sf H } _ { 2 } { \sf S } { C l } _ { 2 } \mathsf { C S } _ { 2 } ，COS等，Limas11IR测量CO，{ C O } _ { 2 } , HCl, C H _ { 4 } { C _ { 2 } H _ { 2 } } , { C _ { 2 } H _ { 4 } } , \sharp 1
·Magnos28磁力机械式氧分析仪用于测量过程气体中的氧或者氮中氧。Magnos27热磁式氧分析仪用于测量过程气体中的氧或者氮中氧。
·Caldos25高抗腐蚀性热导式分析仪用于测量具有不同热导率的二元混合气体，如氮气或空气中氢气、氮气或空气中二氧化碳、录气中氢气。样气池有玻璃制成，Caldos25特别适合测量腐蚀性成分。
·Caldos27热导式分析仪用于测量具有不同热导率的二元混合气体，如氧中氩、氩中氢、氮中甲烷，响应时间快。
·MuItiFID14FID分析仪用于测量碳氢化合物，采用火焰离子检测器原理。
·LS25激光分析仪是基于激光光谱吸收技术基本原理，如测量CO， { C O } _ { z } , （20 \mathsf { C H } _ { 4 } , （204号 N H _ { 3 } , HS, HF, H _ { 2 } O O等。
·电化学式氧传感器用于测量氧气，并且它只能与Uras26红外分析仪一起使用。

The analyzersare made in ABB,the following analyzersare available forselection:

Uras26 InfraredAnalyzermodule for themeasurementof infrared-active gas components e.g. CO, \mathsf { C O } _ { 2 } , NO, { \mathsf { S O } } _ { z } , （204号 \mathsf { C H } _ { 4 } , （204号 N H _ { 3 } . （20号
Limas11 Process Photometer Analyzer module is based onmeasuringprincipleof gas filter correlationorwavelength comparison in ultraviolet and visible spectrum range λ = 200-60o nm (Limas11 UV) and in infrared spectrumrange （204号 λ { = } 2 . 5 { - } 1 0 \mu { m } (Limas11 IR).e.g. Limas11 UV measurement components is NO, { \mathsf { S O } } _ { z } { \mathsf { N O } } _ { z } , H2S, { C l } _ { 2 } , （20 { C S } _ { z } , COS. Limas11 IR measurement components is CO, \mathsf { C O } _ { 2 } , HCI, \mathsf { C H } _ { 4 } , （20 { { C } } _ { 2 } { \mathsf { H } } _ { 2 } , C _ { 2 } H _ { 4 } Magnos 28Magnetomechnical Oxygen Analyzer module for themeasurement of { O } _ { 2 } in process gas or in { \sf N } _ { 2 } . （20 Magnos27 heavy-duty thermomagnetic oxygenanalyzer for the measurement of { O } _ { 2 } in process gas or in { \sf N } _ { 2 } .
Caldos25 Highly Corrosion-resistant Thermal Conductivity analyzermodule for the measurement of binary gasmixtures with different thermal conductivity e.g. \mathsf { H } _ { 2 } n N _ { 2 } or air, \mathsf { C O } _ { 2 } in N _ { 2 } or air, H _ { 2 } in { C l } _ { 2 } . sample cellsembedded in glass, the Caldos25 isspecificallydesigned formeasurementsof corrosive gascomponents. Caldos27 Thermal Conductivity Analyzer module for the measurement of binary gas mixtures with different thermal conductivity e.g.Ar in { O } _ { 2 } , （204号 \mathsf { H } _ { 2 } in Ar, CH4 in N _ { z } Micromechanical siliconsensor with especially short T90 time. MultiFID14FIDAnalyzermodule forthemeasurementof Hydrocarbons with Flame-ionization detector principle. LS25 Laser Analyzer module is based on measuring principle called single-linespectroscopy,e.g.CO, \mathsf { C O } _ { 2 } , （204号 \mathsf { C H } _ { \omega } N H _ { 3 } , H2S, HF, HO, \mathbf { O } _ { z } . （2 Electrochemical Oxygensensor for the measurement of { O } _ { z } . The electrochemical oxygen sensor can only be used in combination with the Uras26 infrared.

ABB公司EL3060防爆气体分析仪

ABB公司EL3060ExGasAnalyzer

有以下型号的分析仪可供选择：

The analyzersare made in ABB,the following analyzersareavailableforselection

·Uras26红外分析仪用于测量红外特性气体组分的分析，例如CO、 \mathsf { C O } _ { 2 } 、NO、 \mathsf { S O } _ { 2 } ， C H _ { 4 } 、NH3

Uras26 infrared Analyzerforthemeasurementof infrared-active gas components e.g. CO, { C O } _ { 2 } , NO, { \mathsf { S O } } _ { 2 } , CH4, NH.

·Magnos28磁氧分析仪用于测量过程气体中的氧或者氮中氧。

Magnos 28 Paramagnetic Oxygen Analyzer for the measurement of { O } _ { 2 } in process gas or in { \mathsf { N } } _ { z } . （20

·Caldos27热导式分析仪用于测量具有不同热导率的二元混合气体，如氧中氩、氩中氢、氮中甲烷。

Caldos27Thermal ConductivityAnalyzer for themeasurement of binary gas mixtures with differentthermal conductivity e.g. Ar in { O } _ { z } , H in Ar, CH in \mathsf { N } _ { 2 } , ·Caldos25高抗腐蚀性热导式分析仪用于测量具有不同热导率的二元混合气体，如氮气或空气中氢气、氮气或空气中二氧化碳、录气中氢气。样气池有玻璃制成，Caldos25特别适合测量腐蚀性成分。

Caldos25 Highly Corrosion-resistant Thermal Conductivity Analyzermodule for the measurement of binary gas mixtures with different thermal conductivity e.g. H _ { 2 } n N _ { 2 } or air, \mathsf { C O } _ { 2 } in N _ { 2 } Or air, \mathsf { H } _ { 2 } \mathsf { i n C l } _ { 2 } . samplecellsembedded in glass,theCaldos25isspecificallydesigned for measurementsof corrosive gascomponents.

ABBLS25激光分析仪

LS25LaserAnalyzerModule

测量原理

LS25激光分析仪模块采用“单线光谱学”。在接近红外光谱的范围内选择一个无干扰的被测量气体吸收波长，一个室温条件下的二极管激光器发射单一吸收波长，激光检测器检测发射光和被测气体分析吸收后的光强度。当检测器测出被测气体分子吸收后的光强度。即可计算出气体浓度。模块中包含温度和压力自动修正。

MeasuringPrinciple

The LS25 Laser Analyzer Module is based ona measuring principlecalled single-linespectroscopy.Onesingle target gas absorption line with no interference is chosen in the near infraredspectral range.Asingle mode diode laser operating around roomtemperature scans thissingleabsorption line.A detectordiametricallyoppositedetects the lightand the absorptioncaused only by the target gasmolecules.Once theabsorptionbythe targetgasmoleculesisdetected,the gasconcentrationiscalculated.Automatic corrections for temperatureand pressureare included.

样气测量组份和量程

LS25分析仪对每种样气组份均有一个物理量程。在物理量程内，量程指示可以自由调整。最低检测极限及相应的最小检测量程如下：

Samplecomponentsandmeasurement ranges

The LS25 Laser Analyzer Module has one physical measurement range per sample component.The indicated measurement range can be freelyadjusted within the physical measurement range.The smallest detection limits and corresponding measurement rangesare shown in the tablebelow:

稳定性

零点漂移： < 2 % 最小量程每3月
量程漂移： < 4 % 最小量程每3月
检测极限： <= 1 % 最小量程
数量：每种组份1个量程档， 1 x 发射源
最大量程：在同样条件下，最大量程一般为最小量程的100倍。通过调节测量光程及选择较弱的吸收线，通常还能调大量程。

Stability

Zero drift: < 2 % of smallest possible measurementrange per3months
Span drift： < 4 % ofmeasurementrangeper3months Detection limit：≤1%of smallest measurement range Measurementranges
Quantity：1range per sample component 1 x transmission LargestMeasurementRange:Largestmeasurementrange isgenerally1oo times theminimummeasurement range for thesame conditions.Largermeasurement rangesare normally possibleby adaptation of measuring path and choice of aweakerabsortion line.

标定

维护间隔：建议每隔3个月。（无需消耗品）

Calibration

Maintenanceintervalrecommended every3months (noconsumablesneeded)

零点检查

利用N等惰性气体或者不含样气成分的空气进行。由于测量原理决定，无需零点标定。

Zero-Point check

With inert gas,e.g.N2,or with ambient air free of the sample component.Due to themeasuringprinciple,there isno zeropoint drift.

标定

Calibration

利用标准气和流通式试验池。

Withtest gasanda flow-through test cell.

影响因素

流量影响：对测量无直接影响；
背景气影响/交叉灵敏度影响：在正常工作条件下无交叉灵敏度影响，但是流量大小会影响吹扫气体量；
气压影响：无零点影响，通过压力付感器的输入进行自动补偿；
温度影响：正常工作环境下无影响；
气体温度影响：仪器自带温度补偿。

Influence effects

Flow:nodirect influence
Background gas/cross sensitivity:no cross sensitivity influenceundernormal operationconditions,but the purging gas needed is depended on the flow;
Air pressure:no influence on zero point,automatic
temperaturecompensation is realized through the inputof pressure sensor;
Temperature:no influenceundernormal operation
conditions;
Gastemperature:withautomaticcompensation function.

动态响应

预热时间小于1小时；
响应时间：小于2秒。

Dynamic response

Preheating time less than1 hour Response time less than2seconds

电源
输入电压： 2 4 { V D C } ± 5 % ，或外部电源115V/220V Ac；(随机附带)
功耗：约20W。

Powersupply

Inputvoltage：24VDC ± 5%from an external power supply
unit115/230VAC(partof delivery)
Power consumption：about 20W

ABB公司工业色谱仪ABB Industrial Chromatographs

川仪在用户身边用户在川仪心中CHUANYIACCOMPANIESCUSTOMERSANDCUSTOMERSARETHEHEARTOFCHUANYI