该页无缩略图
DC\~18GHz2 Channel One-piece Compact
Cable Assembly
Applicable to the interconnection between microwave equipment, test instruments and modules.
SMA(M)
CableAttenuation <2.89dB/m@18GHz
VSWR <1.25:1@18GHz Typ.
ShieldingEffectiveness <-90dB
Phase Stability vs. Flex. <±2°@18GHz
Amplitude Stability vs. Flex. <±0.05dB/m@18GHz
Phase Stability vs.Temp. 500ppm@-55°C\~+85°C
SMP(M) Half Éscapement Integrated Structure Design
— VSWR Curave
The 1.0/2.3 coaxial contacts are widely used in D-sub and rectangular combination connectors for integrated RF/LF cables. The contact interfaces are complied with the standard of DIN 41626/2. At present, the maximum application frequency of this type of contacts is usually only 4GHz, while the MIcable 1.0/2.3 contacts support a higher working frequency up to 18GHz with reliable mechanical and electrical performance.It offers you a best choice in higher frequency applications above 4GHz in 5G communication market.
18GHz High Performance
1.0/2.3 Coaxial Contacts & Cable Assemblies
Design and interface per DIN 41626/2
Working frequency up to 18GHz comparing to the regular 4GHz in the market
VSWR: <1.25:1@8GHz <1.35:1@18GHz
Slide-on coupling mechanism & small size with stable mechanical & electrical performance
| Cable | Description | Cable OD(mm) | Shielding Effectiveness(dB) | Cable Loss (dB/m, Typ.) | VSWR(Max.) | ||||||
| 3GHz | 6GHz | 8GHz | 18GHz | 3GHz | 6GHz | 8GHz | 18GHz | ||||
| C25F | .047 Low Loss Flex.Cable | 1.42 | >100 | 1.93 | 2.77 | 3.22 | 4.96 | 1.20 | 1.25 | 1.25 | 1.35 |
| F06J | .047 Conformable Cable | 1.65 | >100 | 2.03 | 2.95 | 3.41 | 5.12 | ||||
This product adopts N type internally swept right angle connectors with MIcable B12Y ultra-low loss phase stable cable which outer diameter is 4.9mm, it has excellent electrical and mechanical performance with reliable structure, low loss, low VSWR, excellent amplitude and phase stability. It's much suitable for the interconnection between microwave equipment, test instruments and modules.
High Performance Microwave Cable Assemblies
This product adopts N type internally swept right angle connectors with MIcable B12Y ultra-low loss phase stable cable which outer diameter is 4.9mm, it has excellent electrical and mechanical performance with reliable structure, low loss, low VSwR, excellent amplitude and phase stability. It's much suitable for the interconnection between microwave equipment, test instruments and modules
Frequency: DC\~18GHz
Cable Loss: <1.10dB/m@18GHz
VSWR: 1.35:1@18GHz Max.
Shielding Effectiveness: <-90dB
Amplitude Stability over Flex.: <±0.05dB@18GHz
Phase Stability over Flex.: <±4°@18GHz
Phase Stability over Temp.: 500PPM@-55 \~ +85℃
VSWR
The product is composed of internally swept right angle SMA connectors and low loss phase stable cable (Ø4.9mm) with high reliable soldering process and rugged configuration design. The typical 1m length assembly has 2.0dB insertion loss and 1.30:1 VSWR up to 26.5GHz.
NEW
26.5 GHz
SMA-RA
HIGH PERFORMANCE
MICROWAVE CABLE ASSEMBLIES
Cable Loss
<1.10dB/m@18GHz
VSWR
<1.50dB/m@26.5GHz
1.30@18GHz
1.35@26.5GHz Max.
Frequency: DC\~26.5GHz
Shielding Effectiveness: <-90dB
Phase Stability over Flex.: <±4°@18GHz,<±5°@26.5GHz
Phase Stability over Temp.: 500ppm@-55\~+85℃
Amplitude Stability over Flex.: <±0.05dB@18GHz,<±0.07dB@26.5GHz
| Model | Connector Configure | Length(m) | Unit Price(1-24pcs) |
| B12Y-01-05-1M | SMA/M STR to SMA/M RA | 1 | $131.57 |
| B12Y-05-05-1M | SMA/M RA to SMA/M RA | 1 | $155.25 |
The product is composed of internally swept right angle SMA connectors and low loss phase stable cable (Ø4.9mm) with high reliable soldering process and rugged configuration design.The typical 1m length assembly has 2.0dB insertion loss and 1.30:1 VSWR up to 26.5GHz. 1
NEW 18GHZ TNC·RA
High Performance Microwave Cable Assemblies
Cable Loss: <1.10dB/m@18GHz
VSWR:1.25@18GHz Typ.
Shielding Effectiveness:<-90dB
Phase Stability:<±4°@18GHz
Temp. Stability:500ppm@-55℃\~+85℃
Amplitude Stability: <±0.05dB@18GHz
Cable Dia:4.90mm
This product adopts 2.92MM internally swept right angle connectors with B02 ultra-low loss phase stable cable (wire diameter 3.7mm), it has excellent electrical and mechanical performance with reliable structure, low loss, low VSWR, amplitude and phase stability. It's your ideal choice for the interconnection between microwave & mmwave equipment, test instruments and modules, as well as phased array radar and 5G test applications.
DC\~18GHz HIGH PERFORMANCE Push-pull Quick-fit SMA Microwave Cable Assembly
Quick Mount/Unmount
Spring Claw
High Performance
Reliable Structure
—VSWR-Sample
| Cable OD | 3.5mm (FEP Jacket)4.0mm (PUR Jacket) |
| Frequency | DC~18GHz |
| Cable Attenuation | <1.93dB/m@18GHz |
| VSWR | <1.25:1@18GHz |
| Shielding Effectiveness | <-90dB |
| Phase Stability vs. Flex. | <±2°@18GHz |
| Amplitude Stability vs. Flex. | <±0.05dB @18GHz |
MIcable Low PIM cable assemblies provide flexible, hand formable and corrugated cable versions and also allow for various connector selections of SMA, N, 4.3/10 and L29 with low PIM and low VSWR performance, they are good choices for the distributed antenna systems (DAS) and other complex multi-carrier jumper connections as well as low intermodulation testing applications.
| CableOptional | Cable | CableDiameter(mm) | Connector | PIM3(@20W*2, 1880MHz) | VSWR | Insertion Loss for 1M Cable Assembly(dB, Max.) | ||||||
| 1GHz | 2GHz | 6GHz | 18GHz | 1GHz | 2GHz | 6GHz | 18GHz | |||||
| C02 | Flexible .141 | 4.20 | N Male | ≤-155 dBc | 1.15:1 | 1.15:1 | 1.20:1 | 1.35:1 | 0.5 | 0.8 | 1.4 | 2.6 |
| C29H | Ultra Low Loss Flexible .086 | 2.57 | SMA Male | ≤-140 dBc | 1.15:1 | 1.15:1 | 1.20:1 | 1.30:1 | 0.7 | 1.0 | 1.7 | 3.0 |
| F02J | Hand Formable .141 | 4.20 | N Male | ≤-155 dBc | 1.15:1 | 1.15:1 | 1.20:1 | 1.35:1 | 0.6 | 0.8 | 1.4 | 2.6 |
| IM03 | Hand Formable .250 | 6.90 | N Male | ≤-160 dBc | 1.15:1 | 1.15:1 | 1.20:1 | 1.35:1 | 0.4 | 0.6 | 1.0 | 1.9 |
| L29 Male | ≤-160 dBc | 1.15:1 | 1.20:1 | 1.30:1 | ， | 0.4 | 0.6 | 1.0 | - | |||
| IM04 | 1/4"Corrugated Cable, Superflex | 7.50 | N Male | ≤-160 dBc | 1.15:1 | 1.15:1 | 1.25:1 | 1.35:1 | 0.3 | 0.5 | 0.8 | 1.5 |
| L29 Male | ≤-163 dBc | 1.15:1 | 1.20:1 | 1.30:1 | - | 0.3 | 0.5 | 0.8 | - | |||
| G02 | 3/8"Corrugated Cable, Superflex | 10.20 | N Male | ≤-160 dBc | 1.15:1 | 1.15:1 | 1.30:1 | , | 0.3 | 0.4 | 0.8 | - |
| 4.3/10 Male | ≤-165 dBc | 1.15:1 | 1.20:1 | 1.25:1 | - | 0.3 | 0.4 | 0.8 | - | |||
| L29 Male | ≤-165 dBc | 1.15:1 | 1.20:1 | 1.30:1 | = | 0.3 | 0.4 | 0.8 | = | |||
| G04 | 1/2"Corrugated Cable | 15.70 | N Male | ≤-160 dBc | 1.15:1 | 1.15:1 | 1.30:1 | ， | 0.2 | 0.3 | 0.5 | - |
| G06 | 1/2"Corrugated Cable, Superflex | 13.40 | N Male | ≤-160 dBc | 1.15:1 | 1.15:1 | 1.30:1 | - | 0.3 | 0.4 | 0.6 | - |
| L29 Male | ≤-168 dBc | 1.15:1 | 1.20:1 | 1.30:1 | - | 0.3 | 0.4 | 0.6 | 1 | |||
C05 Series DC\~40GHz
High Reliable Stainless Steel Armored Test Cable
Advantages & Features
•Rugged Configuration with Super Flexible Stainless Steel Armor
•Negligible Changes of Phase & Amplitude after Flexing
Exellent Attenuation: 7.69dB/m@40GHz
• Double Protection by High-Shielding Cable & Armor against Salt-Fog, Corrosion, Extrusion & Distortion
•Wide Operation Temp.@-65\~ + 165℃
Applications
• Space Limited Environment Test
Lab & Production Testing
Test in Harsh Environment
M:Cable
E12 Series DC\~40GHz High Performance Low Loss Semi-rigid Cable Assemblies
• Insertion Loss: <2.55dB/m@40GHz
VSWR: <1.30:1@40GHz
Shielding Effectiveness: <-120dB
Operating Temp.: -65\~200°℃
• Preform Technology and Easy to Install
E12-40-1N-L (40=2.92mm Male, 1N=2.92mm F Bulkhead)
MIcable H09 series non-magnetic cable assembly is special designed and developed for the application areas of MRI magnetic resonance imaging, EMC laboratory, particle accelerator and high power equipment connection. The product has the characteristics of non-magnetic, high shielding effectiveness, low loss, high power and excellent VSWR performance. It is a good choice for the application areas above.
M:Cable
NEW
H09 HIGH POWER series Ultra Low Loss Non-magnetic Cable Assembly
FEATURES
Cable Diameter 22.10mm
Frequency DC\~6GHz
VSWR <1.20:1@6GHz
Shielding Effectiveness >90dB
Operating Temp. -40\~+70°C
Applications
MRI Magnetic Resonance Imaging EMC Laboratory
Particle Accelerator
High Power Equipment Connection
— Power & Loss —
| Frequency (GHz) | Attenuation(dB/100m) | Power (W) |
| 0.05 | 1.4 | 5864 |
| 0.1 | 1.9 | 4320 |
| 1 | 6.5 | 1263 |
| 2 | 9 | 982 |
| 3 | 11 | 803 |
| 4 | 13 | 608 |
| 5 | 15 | 590 |
| 6 | 17.5 | 500 |
VSWR
Window 1 (1) S11 Units
| 1.50 1.50 | US22 | 1: | 3.604000 GHz | 1.1206 | ||||||
| 1.45 1.45 1.40 1.40 | > 1: | 3.604000 GHz | 1.1195 | |||||||
| 1.35 1.35 | ||||||||||
| 1.30 | ||||||||||
| 1.25 | ||||||||||
| 1,20 | I PASS | |||||||||
| 1.15 | V | |||||||||
| 1.10 1.10 | ||||||||||
| 1.05 1.05 | ||||||||||
| MM 1.00 1.00 | Ch1: Start 10.0000 MHz | Stop 6.00000 GHz |
This product adopts 2.92MM internally swept right angle connectors with B02 ultra-low loss phase stable cable (wire diameter 3.7mm), it has excellent electrical and mechanical performance with reliable structure, low loss, low VSWR, amplitude and phase stability. It's your ideal choice for the interconnection between microwave & mmwave equipment, test instruments and modules, as well as phased array radar and 5G test applications.
NEW 40GHz 2.92MM-RA High Performance MMWave Cable Assembly
Frequency: DC-40GHz
Cable Loss: <2.20dB/m@40GHz
VSWR: <1.35@40GHz
Shielding Effectiveness: <-90dB
Phase Stability: <±4°@40GHz
Temp. Stability: 500ppm@-55℃\~+85℃
Amplitude Stability: <±0.05dB@40GHz
This product adopts 2.92MM internally swept right angle connectors with B02 ultra-low loss phase stable cable (wire diameter 3.7mm), it has excellent electrical and mechanical performance with reliable structure, low loss, low VSWR, amplitude and phase stability. It's your ideal choice for the interconnection between microwave & mmwave equipment, test instruments and modules, as well as phased array radar and 5G test applications.
DC\~110GHz
High ReliablePrecision RF / Microwave Coaxial Adapters
N, SMA, 3.5mm, 2.92mm, 2.4mm, 1.85mm ,1.0mm, TNC & NMD
High Performance
Competitive Price
• Excellent VSWR • Durability >1000 Cycles
Fast Delivery
Adapter kits are on sale !
| SMA Series | VSWR Max. (:1) |
| SMA Male - SMA Male | 1.15@27GHz |
| SMA Male - SMA Female | |
| SMA Female - SMA Female | |
| SMA Female - SMA Female 4-Hole Flange | |
| SMA Male Quick-plug - SMA Female | |
| SMA Male - SMA Male | 1.15@18GHz |
| SMA Male - SMA Female | |
| SMA Female - SMA Female | |
| SMA Female - SMA Female 4-Hole Flange | |
| SMA Male - SMA Female Bulkhead | |
| SMA Female - SMA Female Bulkhead | |
| SMA Male - TNC Male | 1.20@18GHz |
| SMA Male - TNC Female | |
| SMA Female - TNC Male SMA Female - TNC Female | |
| SMA Female - BMA Female 2-Hole Flange | 1.25@18GHz |
| SMA Male - SMA Male Right Angle | |
| SMA Male - SMA Female Right Angle | |
| SMA Female - SMA Female Right Angle | |
| SMA Female - BMA Male | 1.30@18GHz |
| 3.5mm Series | VSWR Max. (:1) |
| 3.5mm Male - 3.5mm Female | 1.25@34GHz |
| 3.5mm Male - 3.5mm Male | |
| 3.5mm Female - 3.5mm Female | |
| 3.5mm Female - 3.5mm Female 4-Hole Flange | 1.15@33GHz |
| 3.5mm Male - 3.5mm Female | |
| 3.5mm Male - 3.5mm Male | |
| 3.5mm Female - 3.5mm Female | |
| 3.5mm Female - 3.5mm Female Bulkhead | |
| 3.5mm Male - 3.5mm Male Right Angle | 1.30@33GHz |
| 3.5mm Male - 3.5mm Female Right Angle | |
| 3.5mm Female - 3.5mm Female Right Angle |
| 1.85mm series | VSWR Max. (:1) |
| 1.85mm Female - 1.85mm Female | 1.25@67GHz |
| 1.85mm Male - 1.85mm Female | |
| 1.85mm Male - 1.85mm Male | |
| 1.85mm Female - 1.85mm Female 4-Hole Flange | |
| 1.85mm Female - 1.85mm Female Right Angle | |
| 1.85mm Male - 1.85mm Female Right Angle | |
| 1.85mm Male - 1.85mm Male Right Angle 1.85mm Female - 1.85mm Female Bulkhead | |
| 1.85mm Male - 1.85mm Female Bulkhead | |
| 1.85mm Female -2.4mm Female | 1.20@50GHz |
| 1.85mm Female - 2.4mm Male | |
| 1.85mm Male - 2.4mm Female | |
| 1.85mm Male - 2.4mm Male | |
| 1.85mm Female - 2.92mm Female | 1.15@40GHz |
| 1.85mm Female - 2.92mm Male | |
| 1.85mm Male - 2.92mm Female | |
| 1.85mm Male - 2.92mm Male | 1.30@67GHz |
| 1.0mm Female - 1.85mm Female | |
| 1.0mm Female - 1.85mm Male | |
| 1.0mm Male - 1.85mm Female 1.0mm Male - 1.85mm Male | |
| TNC Series TNC Male - TNC Male | VSWR Max. (:1) |
| TNC Male - TNC Female | 1.20@18GHz |
| TNC Female - TNC Female |
| N Series | VSWR Max. (:1) |
| N Male - N Male | 1.15@18GHz |
| N Male - N Female | |
| N Female - N Female | |
| N Female - N Female Bulkhead | |
| N Male - N Male Right Angle | |
| N Male - N Female Right Angle | |
| N Female - N Female Right Angle | |
| N Male - SMA Male | |
| N Male - SMA Female | |
| N Female - SMA Female | |
| N Female - SMA Male | |
| N Female - SMA Female 4-Hole Flange | 1.20@18GHz |
| N Female - SMA Female Bulkhead | |
| N Male - TNC Male | |
| N Male - TNC Female | |
| N Female - TNC Male N Female - TNC Female | |
| N Female - SMA Female Bulkhead 1.25@6GHz |
| NMD Series | VSWR Max. (:1) |
| NMD2.4mm Male - 2.92mm Female NMD2.4mm Male - 2.92mm Male | 1.15@40GHz |
| NMD2.4mm Male - NMD2.92mm Female | |
| NMD2.4mm Male - NMD2.92mm Male | |
| NMD2.92mm Female - 2.92mm Male | |
| NMD2.92mm Male - NMD2.92mm Female | |
| 2.4mm Series | VSWR Max. (:1) |
| 2.4mm Male - 2.4mm Female | 1.15@50GHz |
| 2.4mm Male - 2.4mm Male | |
| 2.4mm Female - 2.4mm Female | 1.20@50GHz |
| 2.4mm Female - 2.4mm Female 4-Hole Flange | |
| 2.4mm Female - 2.4mm Female Bulkhead | 1.25@50GHz |
| 2.4mm Female - 2.4mm Female Right Angle 2.4mm Male - 2.4mm Female Right Angle | |
| 2.4mm Male - 2.4mm Male Right Angle | |
| 2.4mm Female - 2.92mm Female | |
| 2.4mm Female - 2.92mm Male | |
| 2.4mm Male - 2.92mm Female | 1.15@40GHz |
| 2.4mm Male - 2.92mm Male | |
| 2.4mm Female - 2.92mm Female 4-Hole Flange | |
| 2.4mm Female - 2.92mm Female Bulkhead | 1.20@40GHz |
| 2.4mm Male - SMP Male Full Detent | |
| 2.4mm Female - 2.92mm Female Right Angle | |
| 2.4mm Female - 2.92mm Male Right Angle | 1.25@40GHz |
| 2.4mm Male - 2.92mm Female Right Angle | |
| 2.4mm Male - 2.92mm Male Right Angle | |
| 2.4mm Male - 3.5mm Male | 1.15@33GHz |
| 2.4mm Female - 3.5mm Female | |
| 2.4mm Female - 3.5mm Male | |
| 2.4mm Male - 3.5mm Female | |
| 2.4mm Female - SMA Female | |
| 2.4mm Female - SMA Male | |
| 2.4mm Male - SMA Female | 1.15@27GHz |
| 2.4mm Male - SMA Male |
| 2.92mm Series | VSWR Max. (:1) |
| 2.92mm Male - 2.92mm Male | 1.15@40GHz |
| 2.92mm Male - 2.92mm Female | |
| 2.92mm Female - 2.92mm Female | |
| 2.92mm Female - 2.92mm Female Bulkhead | 1.20@40GHz |
| 2.92mm Female - 2.92mm Female 4-Hole Flange | |
| 2.92mm Female - 2.92mm Female Right Angle | |
| 2.92mm Male - 2.92mm Female Right Angle | |
| 2.92mm Female- 2.92mm Female | 1.25@40GHz |
| 2.92mm Male - 2.92mm Female | |
| 2.92mm Male - 2.92mm Male | |
| 2.92mm Male - 2.92mm Male Right Angle | |
| 2.92mm Female - SMA Female | |
| 1.15@33GHz | |
| 2.92mm Female - SMA Male | |
| 2.92mm Male - SMA Female | |
| 2.92mm Male - SMA Male | |
| 2.92mm Female - 3.5mm Female | |
| 2.92mm Female - 3.5mm Male | |
| 2.92mm Male - 3.5mm Female | |
| 2.92mm Male -3.5mm Male |
| 1.0mm Series | VSWR Max. (:1) |
| 1.0mm Female - 1.0mm Female | 1.25@110GHz |
| 1.0mm Male - 1.0mm Female | |
| 1.0mm Male - 1.0mm Male |
MIcable new 40GHz NMD series precision adapters are specially designed for VNA to protect VNA RF ports from damage and reduce the use of the expensive VNA test cables to save cost. The products have excellent performance, very rugged configuration and wide choices which can meet various transforming requirements.
NMD Precision Adapters for Vector Network Analyzer
High Performance!
Competitive Price!
Fast Delivery!
•Excellent VSWR≤1.15:1
• Durability: >1000 Cycles
•Protect VNA Instrument Port
• Save the Cost of VNA Test Cable Assembly
Part No.
NMD 2.4 M - NMD 2.92 M
NMD 2.4 M - 2.92 F
NMD 2.4 M - 2.92 M
NMD 2.92 F - 2.92 M
NMD 2.92 M - NMD 2.92 F
NMD2.4F-NMD2.92M
VSWR
MIcable NMD2.4MM female to NMD2.92MM male adaptors are suited for the vector network analyzers with NMD2.4MM male or NMD2.92MM female ports, they have excellent electrical and mechanical performance with maximum VSWR at 1.15:1@40GHz and durability at 5000 cycles minimum. They are used to protect the ports from accidental damage due to direct contact or wear caused by frequent DUT load and unload, and also avoid of the decline of testing accuracy and service life.
NEW NMD2.4F-NMD2.92M
Adaptor for Vector Network Analyzer
lol Features
Frequency: DC\~40GHz
VSWR: <1.15:1@40GHz
Cable Loss: <0.4dB@40GHz
Durability: >5000
VSWR & IL Test Curve
MIcable NMD2.4MM female to NMD2.92MM male adaptors are suited for the vector network analyzers with NMD2.4MM male or NMD2.92MM female ports, they're used to protect the ports from accidental damage due to direct contact or wear caused by frequent DUT load and unload, and then to avoid of the decline of testing accuracy and service life.
The 1.85MM series high-precision millimeter wave coaxial adapters adopt stainless steel and reinforced structural design with stable structure, high mechanical reliability and outstanding durability, as well as excellent electrical performance of low VSWR and low insertion loss. It is suitable for microwave/mmwave testing with 1.85MM interface and the installation of microwave/mmwave module/instrument/equipment.
MiCable
185mm 1.BSPRECISI Adapters
Cost-Effective
| Within Series | VSWR (Max.) |
| 1.85mm Female- 1.85mm Female | 1.25:1@67GHz |
| 1.85mm Male - 1.85mm Female | |
| 1.85mm Male - 1.85mm Male | |
| 1.85mm Female - 1.85mm Female 4-Hole Flange | |
| 1.85mm Female - 1.85m Female Right Angle | |
| 1.85mm Male - 1.85mm Female Right Angle | |
| 1.85mm Male - 1.85mm Male Right Angle | |
| 1.85mm Female - 1.85mm Female Bulkhead | |
| 1.85mm Male - 1.85mm Female Bulkhead |
| Between Series | VSWR (Max.) |
| 1.85mm Female - 2.92mm Female | 1.15:1@40GHz |
| 1.85mm Female - 2.92mm Male | |
| 1.85mm Male - 2.92mm Female | |
| 1.85mm Male - 2.92mm Male | |
| 1.85mm Female - 2.4mm Female | 1.20:1@50GHz |
| 1.85mm Female - 2.4mm Male | |
| 1.85mm Male - 2.4mm Female | |
| 1.85mm Male - 2.4mm Male | |
| 1.0mm Female - 1.85mm Female | 1.30:1@67GHz |
| 1.0mm Female - 1.85mm Male | |
| 1.0mm Male - 1.85mm Female | |
| 1.0mm Male - 1.85mm Male |
MIcable high performance 2.92mm-RA adapter is designed with swept right angle contact and swept right angle body with stainless steel materials. It has excellent electrical and mechanical performance in reliable structure, low loss, low VSWR. It’s your ideal choice for the interconnection of microwave/mmwave equipment and test instruments, as well as laboratory and production line test applications.
Mlcable high performance 2.92mm-RA adaptor is designed with swept right angle contact and swept right angle body with stainless steel materials. It has excellent electrical and mechanical performance in reliable structure, low loss, low VSWR. It's your ideal choice for the interconnection of microwave/mmwave equipment and test instruments, as well as laboratory and production line test applications. L
MIcable Inc.
暂无英文广告说明
M:Cable
Microwave & Millimeter Wave Cable Assembly Expert
MORE THAN A CABLE
MICROWAVE CABLE & CABLE ASSEMBLY SOLUTION TOOLS
SEARCHING MICABLE DATABASE TO FIND “MY CABLE”
www.micable.cn
Search
MIcable Inc.
M:Cable
[NMD 2.4MM Male] NEW 50GHz VNA Port Connector
High Performance
High Reliability
Frequency DC\~50GHz
VSWR <1.2@50GHz
I.L. <0.70dB@50GHz
Durability >1000 cycles
暂无英文广告说明
Offer 5G Best Cable Assembly Solution with our Professional Knowledge & Technology
\- Comments from well-known 5G equipment supplier
We've delivered 5G customers
Test Cable 6GHz, 26.5GHz, 40GHz, 50GHz, 67GHz & 110GHz
Test Cable for Temperature Cycle -55\~+105℃ up to 40GHz
Superbend® Cable replace minibend/-L up to 67GHz
Hand-flex & Semi-rigid Cable 6GHz, 40GHz & 50GHz
Phase-matched Cable ±1ps@3.5GHz for over 1000pcs ±2°@28GHz for 8pcs/group
Absolute Electric Length Phase-matched Cable for system phase compensation
Multi-Pin Cable Assembly with Phase Matching 4 & 8 pins,6GHz & 40GHz
Low PIM Test Cable up to 4GHz, IM3<-165dBc
Please contact us for your cable assembly solution !
MIcable Inc.
This product adopts N type internally swept right angle connectors with MIcable B32L low loss phase stable cable which outer diameter is 3.5mm. It has excellent electrical and mechanical performance with reliable structure, low loss, low VSWR, excellent amplitude and phase stability. It can resist salt spray test for more than 96 hours and meet IP65 waterproof rating, which is an excellent choice for the interconnection between microwave equipment, test instruments and modules under the harsh marine and outdoor environmental conditions.
This product adopts N type internally swept right angle connectors with Mlcable B32L low loss phase stable cable which outer diameter is 3.5mm. It has excellent electrical and mechanical performance with reliable structure, low loss, low VSWR, excellent amplitude and phase stability. It can resist salt spray test for more than 96 hours and meet IP65 waterproof rating, which is an excellent choice for the interconnection between microwave equipment, test instruments and modules under the harsh marine and outdoor environmental conditions.
The MIcable 40/50GHz high speed multi-pin cable assemblies is designed with blind-mate, high precision contacts. It features a stable and reliable structure with a pin pitch of 4mm, offering high density and excellent mechanical strength. The assembly also delivers superior electrical performance, including low VSWR, low insertion loss, high delay matching accuracy, and excellent amplitude-phase consistency. It is ideally suited for applications such as high speed data testing, semiconductor design and testing, and automated test and measurement.
