点击目录名称可跳转对应的广告

C25F SSMP 40GHz Female Bend Angle Millimeter Wave Cable Assembly 24年11月、25月2/4/5月推过广告

C25F Series DC-67GHz High Performance & Reliable Millimeter Wave Cable Assemblies

C25/C25F DC-40GHz SSMP Cable Assemblies

C25F Series High Corrosion-Resistant Microwave Cable Assemblies

C25H Series Coaxial Delay Lines5

C29H Air Dielectric Ultra Flexible & Low Loss Phase Stable Cable Assemblies 25年3月推过广告，24年10月推过新品

C29F Series 40GHz High Performance Elbow Right Angle MMWave Cable Assembly 25年3月推过新品

C29F Series 40GHz High Performance SMP Microwave Cable Assemblies 23年9月推过广告，23/24年2月推过新品

C29H Series Phase Stable & Phase Matched Cable Assemblies

C29F Series Phase Stable & Phase Matched Cable Assemblies

C29F Series Cost-effective 2.4mm Cable Assemblies

Your Widest Choice for .047 Cable Assemblies

C29S Superbend® Microwave & Millimeter Wave Cable Assemblies

Superbend® N Type Ultra-Flexible High-Performance Cables 24年2月推过广告

Superbend® 67GHz High-performance Millimeter Wave Cable Assemblies 24年1月、25年1月/9月推过广告

B67 Series DC-67GHz Millimeter Wave Cable Assemblies

C04I Series DC-26.5GHz High Performance Test Cable Assemblies

C04I Series DC-26.5GHz High Performance Test Cable Assemblies (Right Angle Connectors)

AT Series Test Cable for VNA

110GHz High Precision Armored Test Cable 25年8月推过广告，24年12月推过新品

110GHz High Performance Millimeter Wave Cable Assemblies 23年3/5月推过广告

T26 Series High Reliable & Durable SMA-RA Test Cable 23年11月推过新品

T26 Series High Reliable & Durable Test Cable 24年8月、25年3月/11月推过广告

T18 Series DC-18GHz Precision Test Cables

首 页

T40/T50 Series High Accurate & Reliable Test Cable

Test Cable Assemblies for Vector Network Analyzer

Test Cable Solution 24年7月推过广告

下一页

5G Test Cable Solution

DC\~50GHz 2.4MM High Performance Semi-rigid Cable Assembly

67GHz High Performance Semi-rigid Cable Assembly With Movable Nut 24年12月推过广告，25年7月推过新品

Cryogenic Component Solutions 24年1月推过广告，24年5月推过Showcase

MIcable Phase Matching Cable Assemblies Expert 24年6月推过广告和产品指南

DC-50GHz Hand Formable Cable Assemblies

2.92mm 40GHz Hand Formable Cable Assemblies

点击目录名称可跳转对应的广告

F01J/F01 Series SMP-40GHz Cable Assembiles(.086 Hand-Flex)

F06J/F06 Series 2.92\~40GHz Cable Assemblies(.047 Hand Formable)

Hand Formable Right Angle .086 & .141 Cable Assemblies

18GHz .086 & .141 High Performance Hand Formable Cable Assemblies 暂不推

.141 Anti-Torque Hand-Flex. Cable Assemblies 暂不推

A11 Series DC-10GHz Ultra Low Loss Super High Power Cable Assemblies

B10 Series DC-18GHz Ultra Low Loss Cable Assemblies with Phase Stability vs. Temp

B02 Series DC-40GHz Ultra Low Loss High Performance Cable Assemblies

A20 Series DC-18GHz High Performance & Armored Test Cable Assemblies43

DC-50GHz High Reliable & Performance Multi-pin Connector Harness Assemblies

DC-40GHz Push-pull-latching Multi-pin Connector Harness Assemblies

DC-50GHz High Reliable SCREW-ON Multipin Cable Assemblies

19-Pin High Performance D38999 Multi-Coax Cable Assemblies

D38999 High Performance Coaxial Contacts

DC\~18GHz 2 Channel One-piece Compact Cable Assemblies 定制产品暂不推

18GHz High Performance 1.0/2.3 Coaxial Contacts & Cable Assemblies

18GHz N-RA High Performance Microwave Cable Assemblies

26.5GHz SMA-RA High Performance Microwave Cable Assemblies

18GHz TNC-RA High Performance Microwave Cable Assemblies

High Performance Push-pull Fast-plug SMA Microwave Cable Assembly 25年10月推过新品

Low PIM Cable Assemblies 23年11月推过广告，23年9月推过Showcase

C05 Series DC-40GHz High Reliable Stainless Steel Armored Test Cable

E12 Series High Performance Low Loss Semi-rigid Cable Assemblies 暂不推

首 页

H09 Series High Power Ultra Low Loss Nonmagnetic Cable Assembly 23年3月推过新品

40GHz 2.92MM-RA High Performance MMWave Cable Assembly

DC\~110GHzPrecision RF Microwave Coaxial Adapter

NMD Precision Adapters for Vector Network Analyzer

NMD2.4F-NMD2.92M Adaptor for Vector Network Analyzer 暂不推

1.85mm High Precision Adapter 23年8月推过广告

High Performance 2.92MM-RA Adaptors

Microwave Cable & Cable Assembly Solution Tools

NMD 2.4mm Male 50GHz Vector Network Analyzer Port-Specific Connector 暂不推

Offer 5G Best Cable Assembly Solution with our ProfessionalKnowledge Technology

18GHz N-RA High Corrosion-Resistant Microwave Cable Assemblies

High Speed Multi-pin Cable Assemblies

The C25F SSMP 40GHz female right angle millimeter wave cable assembly adopts ultra-fine low loss 047 flexible phase stable cable and small-size SSMP female right angle connectors, which is extremely suitable for high density arrangement. The product has the characteristics of high frequency, low loss, low WSWR, and excellent amplitude and phase stability, especially phase change rate <200PPM@-15 \~+35℃ and <400PPM@40 \~+70℃, it’s highly suitable for miniaturized integrated applications with high requirements for amplitude/phase consistency and stability.

The C25F series DC\~67GHz high performance cable assembly has the smallest cable diameter in the 67GHz cable assembly market. This series of products has reliable structure, excellent and stable performance! It is an excellent choice for your miniaturization and integration applications.

MiCable

Series C25F High Performance & Reliable Millimeter Wave Cable Assemblies

3mm Minimum Bend Radius

Phase Stability over Flex. ±6°@67GHz Typ.

Amplitude Stability over Flex. ±0.06dB@67GHz Typ.

Insertion Loss < 10.3dB/m@67GHz

VSWR < 1.35:1@67GHz

Phase Stability over Temp. 500PPM (-40\~+70°C) Typ.

Applications:

• Interconnection System Military/Commercial Equipment Connection

Microwave/Millimeter Wave Receiver/Transmitter

Test Report for 0.6M Cable Assembly

C25/C25F SSMP Cable Assemblies

Ideal for Extremely Limited Installation Space

Advantages & Features:

. 0 4 7 ^ { \prime \prime } Ultra Flexible Cable

SSMP Female & RA Female Available

Bend Radius (Installation): 3mm Min

VSWR: 1.45:1@40GHz Max.

Flex. Phase Stability: ±1°@40GHz (C25) ±4°@40GHz(C25F)

AmplitudeStability: <±0.05dB@18GHz

Low Loss: 8.57dB/m@40GHz Typ. (C25) 7.69dB/m@40GHz Typ. (C25F)

C25-24-24-L C25-0C-0C-L C25-24-0C-L

C25F-24-24-L C25F-0C-0C-L C25F-24-0C-L

24=SSMP Female, 0C=SSMP Right Angle Female, L=Length

C25F Series High Corrosion-Resistant Microwave Cable Assemblies are high-performance microwave cable assemblies for high corrosion environment applications. They have been qualified 192 hours salt spray test per GJB150.11A-2009, and have wide working frequency, low VSWR, high shielding effectiveness, low loss, excellent and stable performance, etc.. They are the excellent choice for shipboard equipment and internal connection of microwave communication/radar equipment.

Salt Spray Test

C25F/Hig Crrsion-Resistant Microwave Cable Assemblies

Ideal for the shipborne & internal connection of equipment under various high corrosion environments

192 Hours Salt Spray Test Qualified per MIL-STD-202G

Cable Loss: <4.96dB/m@18GHz <7.69dB/m@40GHz

Shielding Effectiveness: <-100dB

Phase Stability over Temp.: 500ppm@-40°C\~+70°℃

Cable Dia.: 1.42mm

LRM/SSMP-J (Dual Port)

SMP-K (Dual Port)

SMP-KW (Dual Port)

MIcable C25H series coaxial delay lines are made of ultra-fine & flexible air dielectric ultra-low loss C25H cable. The products have very low loss, excellent shielding effectiveness, accurate time delay, very small bending radius, compact size and stable performance. They are the ideal choice of the delay lines which are required with accurate and long time delay and compact size.

C25H Series Coaxial Delay Lines

— Ideal Choice for High Performance & Compact Delay Lines

Super Small Diameter: 1.42mm, Very Light Weight: 5.5g/m

Long Delay with Compact Size

Higher Shielding Effectiveness:< -100dB

Accurate Time Delay: Tolerance<±1ps Max., ±0.5ps Available

Stable Temperature Performance Delay Change: <30ppm@-5\~+40℃ <500ppm@-40\~+70℃

Operating Frequency Up to67GHz

Customized Delay & Shape Available

Flexible, Simple & Reliable: No Optical-electrical Converter Required

Compared to Fiber-optical Delay Line

MIcable Inc.

Excellent Amplitude & Phase Stability

MIcable C29H air dielectric ultra flexible & low loss phase stable cable assembly uses air as the dielectric, which is the lowest loss .086 cable with the highest velocity of propagation in the market. It's ultra-flexible with a small bending radius of 5mm, and extremely stable in dynamic application environments in terms of amplitude, phase, and VSWR. it also has an excellent temperature phase stability of less than 500ppm change rate over the range of -40\~+70°C. The product is suitable for antenna servo systems, compact space connections, robotics/mechanical arms, and board interconnections, etc., and especially for applications requiring low loss and high amplitude-phase stability.

M:Cable

C29H AIR DIELECTRIC NEW

Ultra Flexible & Low Loss Phase Stable Cable Assemblies

Ideal for applications requiring extremely limited installation space and high reliability

Air Dielectric

M Structure of Cable

Ultra-Low Loss

Test Curve of Sample Length: 1m; SMA/M - SMA/M

MMWave Cable Assembly

The 40GHz high-performance elbow right-angle millimeter-wave cable assembly, launched by MIcable, features a 90° elbow 2.92mm right-angle connector paired with the C29F low-loss phase-stable cable (with a 2.54mm diameter). It offers the same exceptional electrical performance as straight assemblies while providing superior mechanical reliability compared to conventional right-angle assemblies. This product is suitable for production line and laboratory testing, as well as various equipment and system connections.

M:Cable

C29F MMWave Cable Assembly

High Pe

Frequency

DC\~40GHz

Cable Attenuation

4.92dB/m@40GHz Typ.

VSWR

<1.25@40GHz

Shielding Effectiveness

<-90dB

Amplitude Stability vs. Flex

<±0.1dB@40GHz

Phase Stability vs. Flex.

<±3°@40GHz

Phase Stability vs. Temp.

500PPM@-40\~+70°℃

Reliability

VSWR Curve

C29F Series 40GHz High Performance SMP Microwave Cable Assemblies

MIcable C29F series 40GHz high-performance SMP microwave cable assemblies have a wide operating frequency range up to 40GHz with low loss, low VSWR, high shielding effectiveness, and excellent amplitude and phase stability. Also the small cable diameter, small bending radius and blind-mated structure make them easy to install. It is an ideal choice for equipment internal connection, module
interconnection and compact space installation.

40GHz

High Performance SMP Microwave Cable Assemblies

Application: Equipment Internal Connection / Module Interconnection

2.54mm Small Wire Diameter

5mm Bending Radius

Suitable for Compact Space Installation

Reliable Structure
&
Durability
Low Loss
Low VSWR
High Shielding

Excellent
Mechanical Amplitude
Phase Stablity &
Excellent Temp.
Phase Stability

Frequency: DC\~40GHz

Cable Loss: 4.92dB/m@40GHz Typ.

VSWR:1.35:1@40GHz

Shielding Effectiveness: <-90dB

Amplitude Stability over Flex.: <±0.1dB@40GHz

Phase Stability over Flex.: <±3°@40GHz

Phase Stability over Temp.: 500PPM@-40\~ +70°C

VSWR(SMP/F to SMP/F) —

C29H Series Phase Stable & Phase Matched Cable Assemblies

Excellent Phase Stability vs. Temp. & Flex., Ideal for the Application Where Installation Space is Limited but High Reliability Requested

Advantages & Features :

Diameter:2.57mm

Phase Stability vs. Temp.: <500ppm@-40℃\~+70°℃

Small Bending Radius(Static): 5mm Min.

Operating Temp.: -55\~+125℃

Phase Stability vs. Flex.: <5°@50GHz

Shielding Effectiveness:<-100dB

Applications :

Antenna Servo System

In-box Connection

Robot, Manipulator

Board to Board Connection

C29F Series cable assemblies are specially developed for 5G testing and connecting application. They use 0.086 inches flexible 80% propagation velocity low loss phase stable cable, special rugged low cost stainless steel connector design, and advanced assemblying technology. The cable assemblies have outstanding VSWR Typical 1.35:1 @50 GHz, phase stability versus flexture ±5°@50GHz, amplitude stability±0.13dB@50GHz and phase stability 500ppm over - 4 0 { ~ } + 7 0 ^ { \circ } { C } . MIcable can offer 2.4, 2.92, SMP, Multi-Pins connectors for choice, also phase matching and tracking options are available. These cables assemblies are ideal for 5G MIMO testing and equipment inside/external connecting.

C29F Series (Ideal Solution for 5G)

Phase Stable & Phase Matched Cable Assemblies

Advantages & Features:

Phase Stability vs. Flex.: <±4°@50GHz

Phase Stability vs. Temp.: 500ppm@-40\~+70℃

Phase Matching among Multi Pieces: <±3°@40GHz, <±4°@50GHz

Low Loss: 5.71dB/m@50GHz, 6.20dB/m@67GHz

Diameter:2.54mm

Applications:

Massive MIMO Connecting & Testing

Lab & Production Testing

In-box Connection

Equipment/Rack Connection

M:Cable

C29F Series Cost-effective 2.4mm Cable Assemblies

Features & Advantages

• Phase Stability vs.Temp.: 500ppm@-40\~+70°℃

• Amplitude Stability vs. Flexure: <±0.08dB/m

• Phase Stability vs. Flex. : <±5°

• VSWR: 1.30:1 Max

• Insertion Loss: 5.71dB/m Typ.

• Diameter: 2.54mm

Applications

• Microwave & millimeter wave receivers & transmitters

• The connection between the module and the device

• Build various test platforms

• 5G or phased array antenna feed system

VSWR Test Curve (C29F-39-39-0.3M)

C29F-39-39-L (C29F=Cable Model, 39=2.4mm Male Connector, L=Component Length)

MIcable offers 5 kinds of .047" cables to meet various applications. They are semi-rigid and four versions of flexible cables. For each cable, there are wide range of connectors for your choice, including SMA, MCX, SMP, 2.92, 2.4 and 1.85mm, etc. These cable assemblies have excellent VSWR, stable performance and high reliability.

M:Cable

Your Widest Choice In Stock day to 1 weer for .047"Cable Assemblies

Propagation Velocity: 70% Shielding Effectiveness: <-120dE

Propagation Velocity: 70% Shielding Effectiveness: <-100dB Phase Stablity vs. Flex.: ±1°@40GHz

High Strength Braid Layer Propagation Velocity: 70% Shielding Effectiveness: <-100dB Phase Stablity vs. Flex.: ±1°@40GH

Propagation Velocity: 78.7% Shielding Effectiveness: <-100dB Phase Stablity ys. Flex.: ±6\*@67GHz Phase Stablity ys.Temp.: 500ppm@-40\~+70\*C

Propagation Velocity: 87% Shielding Effectiveness: <-100dB Phase Stablity vs. Flex.: ±1°@40GHz Phase Stablity vs.Temp.:500ppm@-40\~+70C

Mlcable offers 5 kinds of .047" cables to meet various applications. They are semi-rigid and four versions of flexible cables. For each cable, there are wide range of connectors for your choice, including SMA, MCX, SMP, 2.92, 2.4 and 1.85mm, etc. These cable assemblies have excellent VSWR, stable performance and high reliability.

MIcable C29S Superbend cable assembly is specially designed for the solution of the interconnection in the compact space condition. It is ideal replacement to traditional right-angle connector semi-rigid/conformable/flexible cable assemblies. It uses low loss and phase stable cable with high tensile strength stainless steel braids, the cable outer diameter is 2.64mm and the bending radius is less than 5mm. The connectors of cable assembly are designed with compact structure and high retention force (>90N), it eliminates the requirement for right-angle connectors as the cable can be bended vertically at the root of joint and the space for bending is even smaller than the regular right-angle connector. The outstanding advantages from this design are space saving, high reliability and cost saving.

C29S Superbend Microwave & Millimeter Wave Cable Assemblies

Low Loss

Low VSWR

High Shielding Effectiveness

High Retention Force

Eliminate Need for Costly Right Angle Connectors

10-249 pcs BEST PRICE

26.5GHz

MIcable C29S Superbend cable assembly is specially designed for the solution of the interconnection in the compact space condition. It is ideal replacement to traditional right-angle connector semi-rigid/conformable/flexible cable assemblies. It uses low loss and phase stable cable with high tensile strength stainless steel braids, the cable outer diameter is 2.64mm and the bending radius is less than 5mm. The connectors of cable assembly are designed with compact structure and high retention force (>90N), it eliminates the requirement for right-angle connectors as the cable can be bended vertically at the root of joint and the space for bending is even smaller than the regular right-angle connector. The outstanding advantages from this design are space saving, high reliability and cost saving.

Features

Frequency: DC\~18GHz

Low Loss: <2.73dB/m@18GHz

Low VSWR: <1.30:1@18GHz

Shielding Effectiveness: <-90dB

Shielded with stainless steel braids with high mechnical strength & flexure durability

Really tight bend radius to save installation space & eliminate the need for costly right angle connectors without performance degradation

Test Plot for 0.2M Cable Assembly

Stop:67.0000GHz

MIcable C29S Superbend® cable assembly is specially designed for the solution of the interconnection in the compact space condition. It is ideal replacement to traditional right-angle connector semi-rigid/conformable/flexible cable assemblies. It uses low loss and phase stable cable with high tensile strength stainless steel braids, the cable outer diameter is 2.64mm and the bending radius is less than 5mm. The connectors of cable assembly are designed with compact structure and high retention force (>90N), it eliminates the requirement for right-angle connectors as the cable can be bended vertically at the root of joint and the space for bending is even smaller than the regular right-angle connector. The outstanding advantages from this design are space saving, high reliability and cost saving.

CIDEDDENT High Performance Millimeter Wave Cable Assemblies

Really tight bend radius to save installation space & eliminate the need for costly right angle connectors without performance degradation

Low Loss <5.7d B/m@67GHz

Low VSWR <1.35:1@67GHz

High Shielding Efficiency < - 9 0 d B

Shielded with stainless steel braids with high mechnical strength & flexure durability

Test Report for 0.2M Cable Assemblies

1Ch1 Start:10.0000MHz --

MIcable new 67GHz millimeter wave cable assemblies have very low loss, low VSWR, excellent mechanical & temperature performance stability and small bending radius. Furthermore, they are very cost effective. These cable assemblies can meet various test and connecting requirements which need higher performance stability.

M:Cable

DC\~67GHz

Millimeter Wave Cable Assemblies

Feature & Advantage :

• Excellent VSWR: 1.35:1@67GHz Max.

• Insertion Loss: 6.2dB/m@67GHz Max.

• Amplitude Stability over Flexure: <±0.15dB@67GHz

• Phase Stability over Flexure: <±6°@67GHz

• Phase Matching: ±0.5-1ps

• Phase Stability over Temp.: <500ppm@-40\~+70°℃

• Cost Effective

B67-0P-0P-L (L=Length)

Test Report for 1M Cable Assembly

Tr3 S12 Trans LogM RefLvl: -3 dB Res: 1 dB/Div

S21 Trans LogM RefLvl: -3dB Res: 1 dB/Div

C04I series are highly reliable and cost-effective cable assemblies which are specially suitable for the long-time, frequent and accurate test application. These assemblies are made with advanced technology and materials, which include the super phase & amplitude stable cable, MIcable's proprietary enhanced stainless steel connectors, advanced strain relief system and assembling technology. Compared with the products in the market, these products show the consistent tested performance even after 20,000 times of bending. If you need to know more information about the products or custom-made service, please contact MIcable and its distributors.

M:Cable

C04I Series DC-26.5GHz High Performance Test Cable Assemblies

Advantages & Features

• Negligible Changes of Phase & Amplitude after Flexing

Excellent Stability for High Accuracy Measurement

• Long-life Consistent Performance

Reinforced Passivated Stainless Steel Connectors

Rugged Configuration & Advanced Strain Relief Design

Triple Shielded with Shielding Effectiveness<-95dB

Custom-Length, Connector, Armor Assemblies Available

C04I Series DC-26.5GHz High Performance Test Cable Assemblies (Right Angle Connectors)

MIcable 18GHz/26.5GHz bending connector test cable assemblies are constructed by our very flexible, phase & amplitude stable C04I cable and specially designed bending connector. These bending connector assemblies have the same performance as that of the straight connector cable assemblies. They have excellent phase and amplitude stability vs flexure, very low VSWR，long life stable performance and low cost, ideally for the test applications in production lines and laboratories.

@26.5GHz

Phase Stability vs. Flex. <±3°

Amplitude stability vs. flexure <±0.08dB

Insertion Loss <2.56dB/m

VSWR <1.3:1

Triple Shielding, Shielding Effectiveness <-95dB

Excellent Strain Relief Design & Rugged Configuration

C04I Series DC\~26.5GHz (SMA M - SMA MRA, 2FT)

AT Series Test Cable for VNA

Advantages & Features

Flexible & Durable, Long Life Cycle

Reinforced Connector, Robust Protection & Ideal Strain Relief

Multilayer Armor Structure to Prevent Cable from Water Dust, Extrusion & Distortion

• Excellent Phase & Amplitude Stability over Bending, Shaking & Torsion

Ideal VSWR & Measurement Accuracy

AT26 VSWR

AT40 VSWR

AT50 VSWR

AT67 VSWR

MIcable AT110 series armored precision test cable uses low loss, phase and amplitude stable cable, coupled with multi-layer composite armor protection. It has excellent mechanical properties in reliable structure, water and oil proof, abrasion, compression and torsion resistance, and good durability, as well as excellent electrical performance in low VSWR, low loss, high shielding effectiveness, and stable amplitude and phase, especially in the room temperature range (-10 ℃\~+30 ℃), the phase change rate is less than 100ppm. It is your ideal choice for the testing of 110GHz products in laboratory and production line.

M:Cable

HIGH PRECISION 110GHz NEW ARMORED TEST CABLE

HIGH PERFORMANCE

HIGH STABILITY

LONG LIFE

Application \* 110 GHz millimeter wave testing \* Equipment & System Connection

Model Outer Diameter Frequency Cable Attenuation VSWR AT110 <15dB/m@110GHz|<1.35@110GHz 5.0mm DC\~110GHz AC110 <16dB/m@110GHz|<1.45@110GHz

Shielding Effectiveness

<-90dB

Phase Stability vs. Flex.

<±8°@110GHz

<±10°@110GHz

Phase Stability vs. Temp.

<100ppm@-10℃\~+30℃ <500ppm@-55℃\~+85℃

Amplitude Stability vs. Flex.

<±0.2dB@110GHz

<±0.3dB@110GHz

Test Curves

The 110GHz millimeter-wave cable assembly is built with 1.0MM precision male connectors and phase stable low loss cable, it’s featured on low loss, low VSWR, high shielding effectiveness and excellent phase stability over both flexure and temperature, as well as mechanical and electrical stability and consistency, it’s your ideal choice for the high frequency millimeter-wave applications up to 110GHz.

110GHz HIGH PERFORMANCE MILLIMETER WAVE CABLE ASSEMBLIES

Cable Loss <15dB/m@110GHz

VSWR<1.45:1@110GHz

Shielding Effectiveness <-90dB

Amplitude Stability vs. Flex. <±0.1dB@110GHz

Phase Stability vs. Flex. <±8°@110GHz

Phase Stablity vs.Temp. 400ppm@-40C\~+70°℃

Wire Diameter 3.0mm w/ armor

Applications

•Connections of module to module or rack to rack

Various test systems

•Temperature cycle test in chamber

Military & commercial millimeter wave equipment

T26 series SMA-RA test cables utilize SMA internally swept right angled connectors with T26 ultra flexible and durable cable, which have excellent amplitude and phase stabilities, as well as quite good electrical performance in VSWR and insertion loss in a wide frequency range from DC to 26.5GHz, even after 150K strict bending cycles. They are ideal for volume production, lab, 5G OTA and phase array antenna test.

T26

SeriesNEW In Stock!

SMA-RA TEST CABLE

Performance Qualified up to 150,000 Bending Cycles

Frequency: DC\~26.5GHz

Cable Loss：< 2.53dB/m@26.5GHz

VSWR：< 1.30:1@26.5GHz

Shielding Effectiveness:<-90dB

Phase Stability over Flex.: <±2°@26.5GHz

Amplitude Stability over Flex.: <±0.04dB@26.5GHz

<br>(SMA M - SMA MRA, 3FT)

MIcable T26 series DC-26.5GHz Test Cable Assemblies are super soft and flexible, they have unbelieveable phase/amplitude stability and very durable life. After 150k strict bending cycles, the performance is still very stable. The qualification test include VSWR, insertion loss, phase & amplitude stability vs flexure, bending cycles, shocking, twisting and temperature cycles. Furthermore, the unique bending connector design can ensure the performance same as that of straight connector cable assemblies. Adding very competitive price, they are ideal choice of the test cables in the production lines and laboratories.

DC-26.5CHz

T26 High Reliable & Durable Series Test Cable

High Quality

High Reliability

Competitive Price

Super Amplitude & Phase Stable

even after 150K Bending Cycles

Straight Connectors

90° Connectors

VSWR/ Insertion Loss

T26 Cable Assemblies Testing Video

(3.5mm M - 3.5mm M, 1 Meter)

T18-07-07-4M
VSWR Test Curve

The 18GHz precision test cables possess low VSWR, low loss and excellent phase and amplitude stabilities, they are suitable for frequent tests in production lines and laboratories!

MiCable

NEW T18 Series DC\~18GHz Precision Test Cables

Features & Advantages

Phase Stability over Flexure: <±4°@18GHz

Amplitude Stability: <±0.03dB@18GHz

Production line/Laboratory test

Applications

Cable Loss: <1.24dB/m@18GHz

Test equipment connection

VSWR: 1.25@18GHz Typ.

T18-01-01-1M

T40 / T50 Series

High Accurate & Reliable Test Cable

Advantages & Features

• Flexible & Durable, Long Life Cycle

Reinforced Connector, Robust Protection

•Excellent Phase & Amplitude Stability over Bending, Shaking & Torsion

•Ideal VSWR & Measurement Accuracy

MIcable VNA test cable assemblies adopted various NMD connectors which mate with VNAs. They have rugged configuration, very stable performance, and are anti-pressure and anti-torsion. These VNA cable assemblies almost cover all test requirements by various VNAs below 67GHz. For the user of VNAs, they are the high performance, cost-saving test cables solution.

M:Cable

Test Cable Assemblies for Vector Network Analyzer

UP to 67GHz

Advantages & Features:

Negligible Changes of Phase & Amplitude after Flexing

Long-life Performance

HighStability for Precision Testing

Excellent Strain Relief Design & Rugged Configuration

Crush & Torque Resistant

High Quality with Reasonable Price

Specifications

Test Economical Cabie Solution Durable

DC\~110GHz

High Performance Millimeter Wave Stainless Steel Armor Protection

26.5/40/50/67/110GHz

High Precision Armor Protected Long Life Cycles

DC\~18GHz

High Performance High Reliability Flexible, Long Life Cycles

DC\~67GHz

High Performance Millimeter Wave High Precision & Cost Effective

DC\~26.5GHz

Super Precision & Stability Ultra-Long Life Qualified for over 150K Bending Cycles

DC\~26.5GHz

High Performance
Long Life
Excellent Stability for High Accuracy Measurement

40/50GHz

High Reliability
High Accuracy
Flexible & Durable, Long Life Cycles

VNA Series

More Information Scan the QR Code

26.5/40/50/67GHz

Test Cable for Vector Network Analyzer Super Precision & Stability Competitive Price

DC\~40GHz

Wide Temperature Range High Accuracy Special for Thermal Shock Testing

MiCable

5G Test Cable Solution

T26/T34 Series

26.5/34GHz

Qualified for over 150K Bending Cycles Super Precision & Stability

C29F Series

Up to 67GHz Special for Test & Connection Economy & High Accuracy

T40/T50 Series

40/50GHz

High Reliability & Accuracy

VNA Series

2 Up to 67GHz Super Precision & Stability Competitive Price

T40E Series

Special for Thermal Shock Testing

AT Series
Up to 110GHz
Armored Test Cable High Accuracy

MIcable Inc.

This product adopts high-performance 2.4mm stainless steel connectors with 086 semi-rigid cable (outer diameter 2.2mm). It can be bent to any requested shape with reliable and excellent mechanical and electrical performance. It is well-suited for the internal and external connection of microwave equipment, test instruments and fixtures.

M:Cable

DC\~50GHz/2.4MM NEW High Performance Semi-rigid Cable Assembly

Features

Cable Loss: <5.27dB/m@40GHz <6.10dB/m@50GHz

VSWR: <1.30:1@40GHz <1.40:1@50GHz

Shielding Effectiveness: <-120dB

This product adopts high-performance 2.4mm stainless steel connectors with 086 semi-rigid cable (outer diameter 2.2mm). It can be bent to any requested shape with reliable and excellent mechanical and electrical performance. It is well-suited for the internal and external connection of microwave equipment, test instruments and fixtures.

VSWR

This high-performance 67GHz millimeter wave cable assembly utilizes .070" low-loss semi-rigid cable. The connector screw nut is designed with a movable feature, enabling visual, fast, and accurate positioning to prevent contact damage during installation and save processing time. Custom 3D pre-form is available upon request, and phase matching is optional, the electrical performance of this product is outstanding, featuring low loss and low VSWR even after formed, there's no wrinkles on the surface after bent and the appearance looks exquisite. This assembly is highly suitable for both internal and external connections in millimeter wave equipment, testing instruments, and test fixtures, especially panel mounting.

DC\~67GHz

<6.2dB/m@67GHz

<1.35:1@67GHz

<-120dB

MIcable cryogenic product series provides a complete of connection solutions for cryogenic applications such as quantum computers. The products mainly include cryogenic cable assemblies, coaxial adapters, and fixed attenuators. The components have the advantages of small size for high-density arrangement, hermetic seal feature for avoiding air inflow and gas leakage, low heat conductivity for minimizing inflow of the heat from the high-temperature end, as well as excellent electrical performance and high working frequency up to 18GHz. They can be working in cryogenic environments below 4K for a long time and is an excellent choice for cryogenic applications. The components have already been successfully applied in the quantum computer projects of Chinese universities.

M:CableCRYOGENIC DC\~18GHCOMPONENTS SOLUTIONS

Excellent VSWR : <1.25:1@18GHz

Long time working in extremely cryogenic environments below 4K (-269.15°C)

SMPM Cryogenic Adapter

SSMP/M to SSMP/M Interface Outer Diameter: Φ5.7mm Perfect for high density arrangement

Stable construction with hermetic seal feature

Cryogenic Semi-rigid Cable Assembly

Cryogenic Fixed Attenuator

Excellent & stable electrical performance through whole working temperature range

Small size SSMP/F interface with outer diameter: Φ4.7mm Perfect for high density arrangement

Hermetic seal feature to avoid air inflow and gas leakage

Tiny cable with special surface treatment for low heat conductivity, minimizing inflow of the heat from the high-temperature end.

Excellent & stable electrical performance through whole working temperature range

SSMP/M to SSMP/F Interface Outer Diameter: Φ4.8mm Perfect for high density arrangement

Stable construction with hermetic seal feature

Excellent VSWR & small tolerance of attenuation Stable electrical performance through whole working temperature range

The components have been successfully applied in the quantum computer projects of Chinese universities

Frequency(GHz)

Cryogenic environment below 4K (-269.15°C)

2-way are connected without attenuator

MIcable has industry-leading precision phase matching, tuning, and stabilizing treatment production technology, and offers a variety of phase matching cables for the microwave market, which includes semi-rigid, conformable, flexible, and integrated ganged cables, with maximum frequency up to 67GHz. The outstanding feature and benefit of MIcable phase matching cable is that the cables can maintain phase matched at straight, bent or coiled status with excellent phase consistency and stability, as well as excellent phase tracking performance over working temperature range. The phase matching accuracy is divided into four levels of low, mid, high, and extremely high, with max capability \mathsf { t o } ± 0 . 0 5 4 ^ { \circ } / \mathsf { G H } z \left( ± 0 . 1 5 \mathsf { p s } \right) , that allows customer to determine and select the appropriate accuracy to obtain better cost-effectiveness. MIcable also offers absolute phase matching cables and amplitude-phase-match cables as per your application requirements.

Level of Phase Matching

Applications

Massive MIMO Feed Network

High Speed Data Transmission

Automatic Testing for Multi-channel Chip/System

Phased Array Radar

Test for Phase & Amplitude Matched Matrix/Switch Matrix

HIGH FREQUENCY

HIGH ACCURACY

HIGH STABILITY

Up to 67GHz

Lowest deviation capable to ±0.054°/GHz (or ±0.15ps)

PHASE TRACK

Keep phase matched at straight bent or coiled status

Keep phase matched over the working temperature range

ABSOLUTE PHASE MATCH (optional)

Phase matched per requested electrical/phase length

PHASE & AMPLITUDE MATCH (optional

Both phase and amplitude matched on requests

CUSTOM PHASE MATCH

Phase matched among multiple channels with several different length segments

SELECTABLE PHASE MATCH LEVEL

Available for phase match level selecting per application requirements so as to achieve high cost-effectiveness

67GHz Extremely High Phase Matching Chart (Cable Length 0.2m)

40GHz

MIcable precision hand-formable cable assemblies cover a wide working frequency range from DC to 50GHz with the advantages of low VSWR, high shielding effectiveness, anti-torque, hand formable and easy installation, they are the best choice for the internal-connection of your commercial and military microwave millimeter wave equipment and instruments.

MiCable

STATE-OF-THE-ART TECHNOLOGY Brings You Excellent Hand Formable Cable Assemblies

Features

Anti-torque design to prevent the cable from damage during Installation

Low VSWR 1.25:1@18GHz; 1.30:1@26.5GHz 1.35:1@40GHz; 1.40:1@50GHz

SMA RA connector up to 26.5GHz

Cables available .047, .086, .141

Applications

Replacement for semi-rigid cable assemblies

Interconnection system

DC\~50GHz

Commercial / Military receiver & transmitter

Optional Connectors

18GHz
Cable Assemblies VSWR

50GHz

MiCable

2.92mm -- 40GHz Hand Formable Cable Assemblies

Advantages & Features:

High Reliable 2.92mm Soldering Connector

Low VSWR: <1.30:1@40GHz

Low Cable Loss: 5.8dB/m@40GHz

Stable Performance vs. Bending

●Smaller Bending Radius@6mm Min.

暂无英文广告说明

M:Cable

F01J / F01 Series SMP-40GHz Cable Assembiles (.086 Hand Formable)

Advantages & Features:

SMP Female on both sides

Applications:

VSWR<1.40:1@40GHz

Interconnection System

Low Loss: 5.8dB/m@40GHz Typ.

Compact Space Connection

Tight Bend Radius

• Jumper

Competitive Price

Easy Installation, Replacement of Semi-rigid Cable

暂无英文广告说明

F06J/F06 Series 2.92\~40GHz Cable Assemblies (.047 Hand Formable)

VSWR<1.30:1@40GHz

★ Low Loss<9.0dB/m@40GHz

Easy Installation and Stability

Tight Bend Radius (4mm Min.)

Competitive Price

F06J Series DC\~40GHz (2.92mm M-2.92mm F Bulkhead,12”)

Hand Formable Right Angle

.086 & .141 Cable Assemblies

F01-05-05-XX\*

F02-05-05-XX\*

( Qty: 10\~99 \*Length<20”)

78 ea. $13.0

Advantages & Features:

● Easy to Bend & Install

● Small Bending Radius

Applications:

● Direct Replacement of .086 & .141 Semi-rigid Cables

● Up to 26.5GHz with Right Angle Connectors at Both Ends

● Microwave/Millimeter Wave Receiver & Transmitter

● Connection in Testing System

● Excellent Return Loss

● Commercial Equipments & Various Military

● Cost Effective

\*If only one connector requested, one of the connectors code can be replaced with '00'

MIcable Inc.

暂无英文广告说明

18GHz .086 & .141 High Performance Hand Formable Cable Assemblies (SMA Male to SMA Male) Selivery Tim

086

Excellent VSWR (with Center Conductor as Pin)

141 Regular

Hand Formable, Replacement of .141 & .086 Semi-rigid Cable Assemblies

Tight Bend Radius, Easy to Install

Stainless Steel Nut, High Mechanical Reliability

141 Anti-torque

With or Without Jacket Optional

M:Cable

.141" Anti-Torque Hand-Flex Cable Assemblies

Advantages & Features

Easy to form to almost any customer shape by hand

Tight bend radius

Built in anti-torque nut to alleviate the risk of stress during installation

Excellent return loss/VSWR RL<-19dB(VSWR<1.25)@18GHz RL<-17.7dB(VSWR<1.30)@26.5GHz

Ideal for interconnect of assembled system

Jacketed & unjacketed options

Application

Replacement for custom bent .141" semi-rigid cables

Communication receivers & transmitters

Military & aerospace system

Environmental & test chambers

M:able

A11 Series DC\~10GHz Ultra Low Loss Super High Power Cable Assemblies

Advantages & Features:

Frequency up to 10 GHz

• Power Handling: 3340 W @ 1 GHz, 910 W @ 10 GHz

• Cable Attenuation: 0.10 dB/m Typ. @ 1 GHz 0.36 dB/m Typ. @ 10 GHz

• Double Shielded with Shielding Effectiveness: < - 90 dB

• Reinforced Passivated Stainless Steel Connectors

Robust Construction with Advanced Strain Relief Design

7/16 & N Type Connectors Available

A11 Cable Assemblies (N M-N M DC-9.4GHz, 1Meter)

MiCable

B10 Series DC\~18GHz Ultra Low Loss Phase Stable cable Assemblies

Advantages & Features

Lowest Attenuation: 0.66dB/m@18GHz

•Outstanding Phase Stability vs.Temp.: 500ppm@-55\~ + 85℃

Light Weight: 125g/m

•Small Overall Diameter: 7.37mm(0.29”)

Applications

• EMC Testing

• Lab & Production Testing

Phase Array Radar

EW System

Mobile CommunicationSystem

暂无英文广告说明

M:Cable

B02Series

DC\~40GHz

Ultra Low Loss High Performance Cable Assemblies

Ultra Low Insertion Loss:<2.21dB/m@40GHz

Phase Stability vs. Flex. : <±3°@40GHz

Amplitude Stability:<±0.05dB@40GHz

Low VSWR:<1.35:1@40GHz

MIcable Inc.

MIcable DC-18GHz A20 series high performance armored test cable assemblies have very rugged configuration：anti-pressure and anti-torsion. Their performance is very stable, very good for the long-life test application.

M:Cable

A20 Series DC\~18GHz

High Performance & Armored Test Cable Assemblies

Feature & Advantage:

•Phase Stability vs. Flex.: <±1°@18GHz

Amplitude Stability vs. Flexure: <±0.05dB@18GHz

• Low Loss: <1.6dB/m@18GHz

• Low VSWR: 1.25:1@18GHz Typ.

• Excellent Strain Relief Design & Rugged Configuration

•Waterproof (IP67), Anti-pressure, Anti-torsion

M:Cable

High Reliable & Performance Multi-Pin Coaxial Harness Assemblies

Advantages & Features:

Excellent Electrical Performance VSWR<1.40:1@50GHz

•No Performance Changes at Incomplete Mating Condition

●Multi Channels, Small Size, Light Weight, Easy to Install

•Available for Phase Matching

Applications:

Military& Commercial Antenna Array Systems

High Speed Data Transmission

•Other Integrated Applications

Allowed Incomplete Mating Interface

MIcable DC\~40GHz push-pull-latching multi-pin connector harness cable assemblies have the characteristics of high reliability, compact size, high performance and easy to be connected and disconnected. They are very suitable for the connecting application of multi-cables that require high frequency, miniature and high performance.

M:Cable

Push-pull-latching

Multi-pin Coaxial Harness Assemblies

DC\~40GHz

Feature & Advantage:

• Security of the Push-pull Self-latching System

•Consistent Impedance and Excellent VSWR:

<1.30:1 @20GHz, <1.40:1@40GHz

• 360° Screening for Full EMC Shielding

• High Packing Density for Space Savings

•Allowed Incomplete Mating Interface: 2mm

Application:

• Military & Commercial Telecommunication System

• EMI & EMC

•Portable Instrument

VSWR

Ch1: Start 10.0000 MHz-- Stop 40.0000 GHz

MIcable high performance screw-on circular multicoax cable assemblies are mainly used for the transmission of RF signals in electronic equipment, which allow you to connect your multi-channels at one-time mounting, they have positioning error-proof design to avoid any mis-operation, and the positioning marks on the shell make your connection quickly. They have good performance in mechanical shock and vibration, and also excellent and stable electrical performance. They can be widely used in military and civil antenna array systems, communication systems, airborne shipboard equipment and so on.

Advantages & Features:

• Excellent Electrical Performance

VSWR<1.40:1@50GHz

•No Performance Changes at Incomplete Mating Condition

Multi Channels, Small Size, Light Weight, Easy to Install

Available for Phase Matching

Allowed Incomplete Mating Interface

Completely Mated

VSWR vs. Different Mating Interface

Applications:

Military & Commercial Antenna Array Systems

High Speed Data Transmission

Other Integrated Applications

19-Pin High Performance D38999 Multi-Coax Cable Assemblies can transmit 19-channels RF signals to 40GHz at one-timing mounting. The product has compact structure and reliable connection, the core is used ultra-incompletely matched design to ensure excellent electrical performance, stable and reliable signals. The plug circular connector uses D38999III series standard three-threaded structure, which allows quick and easy connection and disconnection, and they have positioning error-proof design to avoid any mis-operation and automatic loosening. They have good performance in mechanical shock and vibration, and also excellent and stable electrical performance. They can be widely used in military and civil antenna array systems, communication systems, airborne shipboard equipment and so on.

NEW 19-Pin High Performance D38999Multi-Coax Cable Assemblies

Advantages & Features

† Ultra Wide Frequency Range: DC - 40GHz

Excellent Electrical Performance: VSWR<1.35:1@40GHz

D38999III Series Tri-Start Quick Coupling & Self Lock

Applications

\+ Military & Commercial Antenna Array Systems

† No Performance Changes at Incomplete Mating Condition

\+ High Speed Data Transmission

Available for Phase Matching

5G Test

MIcable D38999 high performance coaxial contacts are used for MIL-DTL-38999 circular connectors, there are 2 sizes and 4 types of contacts available at present, that are BMA type (size 8), RMMP type (size 8), SMMP type (size 12) and SSMP type (size 12). The working frequency range of size 8 contacts is DC-18GHz, and size 12 is DC-40GHz normally, and the VSWR of the contacts are 1.25@18GHz and 1.35@40GHz typically.

Suit for: MIL-DTL-38999 Circular Connector series I, III, IV