eaton-bussmann-series-nh-gear-catalogue-ca132061en-en-gb - 电子书在线预览、各类电子书在线制作-云展网平台

EBH

140

32 37

7 8

R3 85

102

ø9 33

196

214

140

32 37

7 8

R3 85

102

ø11 57

196

214

140

32 37

7 8

102

69 69

196

214

17.5

Terminal adaptors

EBH 00 EBH1

EBH2

EBH Horizontal fuse switch disconnector - Outline drawings (mm)

EATON Bussmann series NH Gear catalogue 51

EBH

EBH 1

EBHA10 - Terminal adaptor

Terminal adaptor EBH1

3 x V-clamp + terminal shroud

EBH 1 and EBH2

EBHA11 - Auxiliary contacts microswitch

Auxiliary contacts microswitch

AC-15 Ue

230 V ~ Ie

= 2.5 A

DC-13 Ue

230 V ~ Ie

= 0.3 A

EBH2

EBHA12 - Terminal adaptor

Terminal adaptor EBH2

3 x V-Clamp + terminal shroud

EBH3

EBHA13 - Auxiliary contacts

Auxiliary contacts

(microswitch)

AC-15 Ue

110/230/400 V~ Ie

= 1 A

DC-13 Ue

48/110/220 V~ Ie

= 0.5 A

screw terminals

conductors cross-section:

– solid – 1 x 0.5 = 1 mm2

– stranded – 1 x 0.5 = 0.75 mm2

EBH000

EBHA1 - Feeding bridge

Feeding bridge EBH 000 25-95 mm2 (1 set - 3 pcs.) for

connection of conductor of cross-section

25 - 70 mm2 25 - 95 mm2

EBHA2 - Auxiliary contacts

Auxiliary contacts (microswitch)

AC-15 Ue

230 V~ Ie

2,5 A

DC-13 Ue

230 V~ Ie

0,3 A

EBHA3 - Additional terminal shroud

Additional terminal shroud „O”extends

shroud length of 25 mm

EBH00

EBHA4 - Feeding bridge

Feeding bridge clamp EBH 00 25 - 95 mm2 (1 set -

3 pcs.) for connection of conductor of cross-section

25 - 70 mm2 25 - 95 mm2

EBHA5 - Clamp

Clamp for EBH 00

2 x 25 mm2

1 x 16 mm2

EBHA6 - Clamp

Clamp for EBH 00 4 x 10 mm2

EBHA7 - Auxiliary contacts (microswitch)

Auxiliary contacts (microswitch)

AC-15 Ue

230 V~ Ie

2.5 A

DC-13 Ue

230 V~ Ie

0.3 A

EBHA8 - Full cover (matt)

Full cover matt

EBHA9 - Terminal adaptor

Terminal adaptor + 3 x clamp + terminal

shroud

EBH Horizontal fuse switch disconnector - Accessories

52 EATON Bussmann series NH Gear catalogue

EBV

Vertical fuse switch disconnector

• Fibre glass strenghtened, self extinguishing thermoplastics of V0 flammability

class

• Double clearance between open contacts

• Arc chutes with deionisation plates over every contact

• Reversible - top/bottom cable terminal connection

• Wide range of accessories

EBV Introduction 54-55

EBV Technical data 55

EBV Catalogue numbers structure 56

EBV00 100 mm busbar system 57-58

EBV00 185 mm busbar system 59-60

EBV2 185 mm busbar system 61-62

EBV3 185 mm busbar system 61 and 63

EBV2 and EBV 3 Fuse disconnector with

lateral busbar terminal

EBV with electronic fuse monitoring

module

65-66

Outline drawings 67-71

Accessories 72-73

EATON Bussmann series NH Gear catalogue 53

EBV

Sizes

EBV fuse switch disconnectors are designed for installation onto 185 mm busbar system. They are available in following sizes (according

to rated current):

• 00 (160 A)

• 2 (400 A)

• 3 (630 A and 1250 A upon request)

EBV size 00 are manufactured in two versions depending on busbar system:

• EBV00/100mm fuse switch disconnector (160 A) for installation on 100 mm busbar system. Installation on 185 mm busbar system

is possible by using an adaptor.

• EBV00 fuse switch disconnector (160 A) for installation on 185 mm busbar system.

Construction

EBV fuse switch disconnectors are manufactured in two versions:

• One-pole switching (separately each pole)

• Three-pole switching (three poles simultaneously)

They are manually operated, consequently making and breaking is dependant on the speed of operation.

Main base of fuse switch disconnector EBV is made of halogen free, fibre glass strengthened, self extinguishing, thermoset

polyester of V0 flammability class. Other plastic parts of fuse switch disconnectors EBV are made of halogen free fibre glass

strengthened, thermoplastic polyamides.

Silver plated contacts provide low power loss. Depending on clamp type, EBV fuse switch disconnectors enable user to connect circular

or sector-shaped conductors with busbar ends or conductors with lug terminals. Arc chute with deionization plates are installed over

each contact ensuring better arc extinction and exhaust of arc plasma. Protection degree of IP30 from the front is provided.

Additional accessories enable to install EBV fuse switch disconnectors of different sizes on common busbar systems. All sizes of EBV

fuse switch disconnectors are provided complete with clamps (i.e. screws, V-terminals, 2V-terminals) and shrouds for cable terminals.

The making and breaking operations has to be done with adequate force since these are manually operated switches

Parallel moving, double contact system.

Fuse switch disconnectors width: 50, 100 and 200 mm.

Suitable for top cable terminal connection.

Flexibility to terminate circular or sector-shaped busbar conductors for V or 2V terminals. Conductors with lugs can be

terminated with screw terminals.

Voltage test can be performed through test holes leading to blade contacts.

Applications

EBV vertical fuse switch disconnectors are designed for distribution of electricity and protection against short circuits and overloads

in three phase. They are designed to be used with NH fuse links and are meant for direct installation on horizontal or vertical busbar

systems.

EBV fuse switch disconnectors conform to IEC 60947-1- and IEC 60947-3 standards. EBV fuse switch disconnectors are designed for

applications which require reliability and safety like low voltage distribution boards installed in transformer substations, industrial low

voltage distribution boards and cable cabinets.

Removal of fuse links is simple and safe. Once the fuse links are removed,there is a large isolating distance clearly visible. Mounting

and cable termination is simple and can be accomplished by one person only using insulated equipment.

EBV fuse switch disconnectors are designed to perform the following functions:

• Protection,

• Energy distribution,

• Earthing,

• Switching,

• Touch protection.

54 EATON Bussmann series NH Gear catalogue

EBV

Operating conditions

• To be installed in a room free of any dust, aggressive or explosive gases

• Altitude up to 2000 meters above sea level

• Outdoor – in cabinets with protection degree > IP 34

• Ambient temperature from -25°C to +55°C

• Relative humidity of the air should not be higher than 50 percent at temperature of +40°C

Technical data

Description

Rated

voltage

EBV00

100 mm EBV00 EBV2 EBV3 EBV3-1250

Rated thermal current Ith=In

with fuse links

160 A 160 A 400 A 630 A -

Rated thermal current Ith with solid links - - 600 A 750 A 1250 A

Rated voltage Un 690 V a.c. 690 V a.c. 690 V a.c. 690 V a.c. 400 V a.c.

Utilisation category

690 V a.c. AC-22B AC-22B AC-22B AC-21B -

500 V a.c. - - - AC-22B -

400 V a.c. AC-23B AC-23B AC-23B AC-23B AC-22B

Rated switching current Ie - 160 A 160 A 400 A 630 A 1250 A

Rated short-circuit making current

690 V a.c. 25 kA 80 kA 100 kA 80 kA -

500 V a.c. 25 kA - 100 kA 100 kA -

400 V a.c. 25 kA 100 kA 100 kA 100 kA -

Rated short-circuit withstand current

690 V a.c. 100 kA 80 kA 100 kA 80 kA -

500 V a.c. 100 kA - 100 kA 100 kA -

400 V a.c. 100 kA 100 kA 100 kA 100 kA -

Rated insulation voltage Ui

1000 1000 1000 1000 1000

Rated impulse withstand voltage Uimp. 8 kV 12 kV 12 kV 12 kV 12 kV

Rated short time withstand current Icw - - 121

/152 kA 141

)/162 kA 15/203 kA

Rated frequency 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz

Mechanical durability (Number of cycles) 1600 1600 1000 1000 600

Electrical durability (Number of cycles) 200 200 200 200 100

IP degree of protection (IP) 30 20 30 30 30

Compatible NH Fuse links body size 00 00 1, 2 3 solid links

1) For disconnectors 1-phase disconnected 2) For disconnectors 3-phase disconnected 3) With mechanical lock

EATON Bussmann series NH Gear catalogue 55

EBV

Example: EBV233SV1

Ordering code information Type designation

Product type EBV

NH Fuse link size 2

Mounting type 3

Number of poles 3

Simultaneous or separate switching S

Terminal clamps V1

Complete part numbers EBV 2 3 3 S V1

Catalogue number EBV233SV1

represents a vertical fuse switch

disconnector, for NH Fuse link size 2,

suitable for 185 mm busbar system 33,

each phase switching separately S, with

V-terminals and V-clamps V1.

Vertical fuse

switch

disconnector

NH Fuse

link size Mounting type Poles Switching type Terminal clamps details

Electronic module or Lateral

busbar

EBV 00

11 = 185 mm busbar

with heightened rails

23 = 100 mm busbar

system

33 = 185 mm busbar

system

1 = onepole

3 = threepole

S = Each phase

switching separately

T = Simultaneous 3

phase switching

M1 = Screw terminals with pressed nuts

M2 = Screw terminals with pressed nuts M12

S8 = Screw terminals with M8 Screws

V0 = V-terminals without V-clamps

V1 = V-terminals with V-clamps

W0 = 2-V Terminals without double V-clamps

W1 = 2-V Terminals with double V-clamps

-E = Electronic fuse monitoring

module

-L = Lateral busbar terminal - Left

side

- R = Lateral busbar terminal - Right

side

Miscellaneous part: EBV3-12150-3-2M-L and EBV3-1250-3-3M-R see details page 64

Catalogue numbers structure

56 EATON Bussmann series NH Gear catalogue

EBV

EBV00 Vertical fuse switch disconnector, size 00, 160 A, 690 V, 100 mm busbar system

Padlocking in parked

and closed position

Terminal shroud label

Hole for sealing of

terminal shroud

Fuse link cover label

(one label for each phase)

Test holes

EBV 00/100 mm

For installation on 100 mm busbar system

Fuse switch disconnector’s width 50 mm

Three pole switching - all phases simultaneously

EATON Bussmann series NH Gear catalogue 57

EBV

EBV00 / 100 mm busbar system - Technical data

EBV00 Vertical fuse switch disconnector, size 00, 160 A, 690 V, 100 mm busbar system

Description EBV00 / 100 mm

Rated thermal current Ith=In 160 A

Rated voltage Un 690 V a.c.

Utilisation category AC-22B AC-23B

Rated switching voltage Ue 690 V a.c. 400 V a.c.

Rated switching current Ie 160 A

Rated short circuit

making current 25 kA

Rated short circuit

withstand current 100 kA

Rated insulation voltage Ui 1000 V

Rated impulse

withstand voltage Uimp.

8 kV

Rated frequency 50-60 Hz

Mechanical durability (number of cycles) 1600

Electrical durability (number of cycles 200

IP degree of protection (IP) 30

Compatible NH Fuse link body size 00

Accessories see page 72

100 mm busbar system Weight

Three pole switching - all phases simultaneously (for installation on 100 mm busbar system)

EBV0023TS8 cable terminals: bridge terminals with bridge clamps (S) 4-70 mm2

, screw terminals with M8 screws 1,3 kg

EBV0023TV1 cable terminals: V-terminals with V-clamps 25-120 SW 1,5 kg

EBV0023TV0 cable terminals: V-terminals, without V-clamps 1,3 kg

EBV00 Terminal clamps details

Description

Clamp S-bridge clamp 2 x M5 x 25 M8 screw* V-clamp 25-120 SW HM 10-120

Outline drawing

Cross –section

of conductors 4 - 70 mm2

Conductor with

lug terminal

max 185 mm2

re 16 mm2

- 95 mm2

se 25 mm2

- 120 mm2

re 10 mm2

- 70 mm2

se 20 mm2

- 120 mm2

rm 16 mm2

- 95 mm2

sm 25 mm2

- 120 mm2

rm 10 mm2

- 70 mm2

sm 25 mm2

- 95 mm2

Tightening torque 3 Nm** 12 Nm** 20 Nm** 15 Nm**

For stranded conductors using cable ferrules is recommended

*) Busbars of maximum width of 20 mm and maximum thickness of 5 mm can be fixed to M type screw terminals.

**) using torque wrench is recommended

***) fuse switch disconnectors with V-terminals are equipped with steel V-clamp HM 10-120 on request

Recommend using Eaton V-terminals only. Minimum tightening torque (M8 screw) for screws fixing fuse switch disconnector to busbar system –12 Nm,

recommended tightening torque for screws and nuts with property class 8.8 – 21 Nm

***

EBV00 - Catalogue numbers

58 EATON Bussmann series NH Gear catalogue

EBV

Description EBV00 / 185 mm

Rated thermal current Ith=In 160 A

Rated voltage Un 690 V a.c.

Utilisation category AC-22B AC-23B

Rated switching voltage Ue 690 V 400 V

Rated switching current Ie 160 A

Rated short circuit making current 80 kA (690 V a.c.)

100 kA (400 V a.c.)

Rated short circuit withstand current 80 kA (690 V a.c.)

100 kA (400 V a.c.)

Rated insulation voltage Ui 1000 V a.c.

Rated impulse

withstand voltage Uimp.

12 kV

Rated frequency 50-60 Hz

Mechanical durability (Number of cycles) 1600

Electrical durability (Number of cycles) 200

IP degree of protection (IP) 20

Compatible NH Fuse link body size 00

Accessories see page 72

EBV00 / 185 mm busbar system - Technical data

185 mm busbar system Weight

Three-pole switching - each phase independently

EBV0033SS8 Cable terminals: bridge terminals with bridge clamps (S) 4-70 mm2

, screw terminals with M8 screws 2,6 kg

EBV0033SV1 Cable terminals: V-terminals with V-clamps 25-120 SW 2,7 kg

EBV0033SV0 Cable terminals: V-terminals, without V-clamps 2,6 kg

Three-pole switching - all phases simultaneously

EBV0033TS8 Cable terminals: bridge terminals with bridge clamps (S) 4-70 mm2

, screw terminals with M8 screws 2,7 kg

EBV0033TV1 Cable terminals: V-terminals with V-clamps 25-120 SW 2,8 kg

EBV0033TV0 Cable terminals: V-terminals, without V-clamps 2,7 kg

EBV 00 with heightened rails adjusted to front line and terminal cover of EBV 2, 3

One-pole switching - each phase independently

EBV0011SS8 Cable terminals: bridge terminals with bridge clamps (S) 4-70 mm2

, screw terminals with M8 screws 2,7 kg

EBV0011SV1 Cable terminals: V-terminals with V-clamps 25-120SW 2,8 kg

EBV0011SV0 Cable terminals: V-terminals, without V-clamps 2,7 kg

One-pole switching - all phases simultaneously

EBV0011TS8 Cable terminals: bridge terminals with bridge clamps (S) 4-70 mm2, screw terminals with M8 screws 2,8 kg

EBV0011TV1 Cable terminals: V-terminals with V-clamps 25-120 SW 2,9 kg

EBV0011TV0 Cable terminals: V-terminals, without V-clamps 2,8 kg

EBV00 Vertical fuse switch disconnector, size 00, 160 A, 690 V, 185 mm busbar system

For installation on 185 mm busbar system

Fuse switch disconnector’s width 50 mm

Three pole switching - all phases simultaneously - two-hand operation

or one pole switching - each phase independently

EBV 00-S EBV 00-T

EBV00 - Catalogue numbers

EATON Bussmann series NH Gear catalogue 59

EBV

EBV00 / 185 mm busbar system - Terminal clamps details

Description

Clamp S-bridge clamp 2 x M5 x 25 M8 screw* V-clamp 25-120 SW HM 10-120

Outline drawing

Cross–section of

conductors 4 - 70 mm2

Conductor with

lug terminal

max 185 mm2

re 16 mm2

- 95 mm2

se 25 mm2

- 120 mm2

re 10 mm2

- 70 mm2

se 25 mm2

- 120 mm2

rm 16 mm2

- 95 mm2

sm 25 mm2

- 120 mm2

rm 10 mm2

- 70 mm2

sm 25 mm2

- 95 mm2

Tightening torque 3 Nm** 12 Nm** 20 Nm** 15 Nm**

For stranded conductors using cable ferrules is recommended

*) Busbar of maximum width of 20 mm and maximum thickness of 5 mm can be fixed to M-type screw terminals

**) Using torque wrench is recommended

***) Fuse switch disconnectors with V-terminals are equipped with steel V-clamp HM 10-120 on request

Recommend using Eaton V-terminals only. Minimum tightening torque (M8 screw) for screws fixing fuse switch disconnector to busbar system

– 12 Nm, recommended tightening torque for screws and nuts with property class 8.8 – 21 Nm

***

EBV 00 version with heightened rails,

adjusted to front line and terminal cover

of EBV 1, 2, 3 without using adaptor

Installation on busbar system

with use of hooked clamps

Or screws

EBV00-S EBV00-T EBV00-S EBV00-T

Fuse switch disconnector with cable

terminals at the top Parking position

EBV00 Vertical fuse switch disconnector, size 00, 160 A, 690 V, 185 mm busbar system

60 EATON Bussmann series NH Gear catalogue

EBV

1 - Main base

2 - Hooked clamp – for installation on busbar system

3 - Terminal shroud for fuse switch disconnector with

double V-clamps (2 x 240 mm2

)

4 - Terminal shroud (long)

5 - Terminal shroud (short)

6 - Bottom adjusting shroud

7 - Cable terminal protective cover

8 - protective busbar barrier

Description

Sealing of each phase

separately

Padlocking and sealing

in closed and parked

position

Possible connection

of fused tee off adaptor

for temporary power supply

Possibility to use ammeter

Fuse link cover labelling area

Test holes

Hole for sealing of

terminal shroud

Terminal shroud label

Vertical fuse switch disconnector, EBV2 size 2, 400 A and EBV3 size 3 630 A, 690 V a.c.

185 mm busbar system

For installation on 185 mm busbar system

Fuse switch disconnector’s width 100 mm

Three pole switching - all phases simultaneously or one pole switching - each phase independently

EBV3

EATON Bussmann series NH Gear catalogue 61

EBV

Description EBV 2 V-Clamps (400 A) EBV 2 Double V-Clamps EBV 2 with M10 screw

Clamp V-clamp V-clamp HS M10 screw (pressed nut)*

Outline drawing

Cross-section of

conductors

V-clamp for direct fixing of conductor with busbar end with crosssection of:

35 - 185 mm2 35 - 240 mm2 35 - 185 mm2 35 - 240 mm2

35 - 240 mm2 35 - 300 mm2 35 - 240 mm2 35 - 300 mm2

Tightening torque 30 Nm 40 Nm 32 Nm

185 mm busbar system Weight

Three-pole switching - each phase independently

EBV233SV1 Cable terminals: V-terminalswith V-clamps 240 mm2 5,8 kg

EBV233SM1 Cable terminals: screw terminals with pressed nuts M10 5,7 kg

EBV233SW1 Cable terminals: 2V-terminalswith double V-clamps 240 mm2 6,4 kg

EBV233SV0 Cable terminals: V-terminals without V-clamps 5,5 kg

EBV223SW0 Cable terminals: 2V-terminals without double V-clamps 6,9 kg

Three-pole switching - all phases simultaneously

EBV233TV1 Cable terminals: V-terminalswith V-clamps 240 mm2 5,8 kg

EBV233TM1 Cable terminals: screw terminals with pressed nuts M10 5,7 kg

EBV233TW1 Cable terminals: 2V-terminals with double V-clamps 240 mm2 6,4 kg

EBV233TV0 Cable terminals: V-terminals without V-clamps 5,5 kg

EBV233TW0 Cable terminals: 2V-terminals without double V-clamps 5,9 kg

EBV2 / 185 mm busbar system - Technical data

For stranded conductors using cable ferrules is recommended

*) Busbars of maximum width of 40 mm and maximum thickness of 8 mm can be fixed to M type screw terminals when protective busbar barrier

between phases is installed.

Recommend using Eaton V-terminals only. Minimum tightening torque (M12 screw) for screws fixing fuse switch disconnector to busbar system – 32 Nm,

recommended tightening torque for screws and nuts with property class 8.8 – 56 Nm

EBV2 Vertical fuse switch disconnector, size 2, 400 A, 690 V, 185 mm busbar system

Description EBV2 / 185 mm

Rated thermal current Ith=In with fuse links 400 A

Rated thermal current Ithwith solid links 600 A

Rated voltage Un 690 V a.c.

Utilisation category AC-22B AC-23B

Rated switching voltage Ue 690 V a.c. 400 V a.c.

Rated switching current Ie 400 A

Rated short circuit making current 100 kA

Rated short circuit withstand current 100 kA

Rated insulation voltage Ui 1000 V a.c.

Rated impulse withstand voltage Uimp. 12 kV

Rated short time withstand current Icw 121

/152 kA

Rated frequency 50-60 Hz

Mechanical durability (number of cycles) 1000

Electrical durability (number of cycles) 200

IP degree of protection (IP) 30

Compatible NH Fuse link body size 1, 2

Accessories see page 73

EBV2 - Terminal clamps details

Designed for operation with NH1 and NH2 fuse links

1) for disconnectors 1-phase disconnected

2) for disconnectors 3-phase disconnected

EBV233S EBV233T

EBV2 - Catalogue numbers

62 EATON Bussmann series NH Gear catalogue

EBV

EBV3 Vertical fuse switch disconnector, size 3, 630 A, 690 V, 185 mm busbar system

EBV3 / 185 mm busbar system - Technical data

EBV333S EBV333T

For stranded conductors using cable ferrules is recommended

*) Busbars of maximum width of 40 mm and maximum thickness of 8 mm can be fixed to M type screw terminals when protective busbar barrier

between phases is installed.

Recommend using Eaton V-terminals only. Minimum tightening torque (M12 screw) for screws fixing fuse switch disconnector to busbar system – 32 Nm,

recommended tightening torque for screws and nuts with property class 8.8 – 56 Nm

185 mm busbar system Weight

Three-pole switching - each phase independently

EBV333SV1 Cable terminals: V-terminalswith V-clamps 240 mm2 6,6 kg

EBV333SM2 Cable terminals: screw terminals with pressed nuts M12 6,5 kg

EBV333SW1 Cable terminals: 2V-terminalswith double V-clamps 240 mm2 7,2 kg

EBV333SV0 Cable terminals: V-terminals without V-clamps 6,3 kg

EBV333SW0 Cable terminals: 2V-terminals without double V-clamps 6,7 kg

Three pole switching - all phases simultaneously

EBV333TV1 Cable terminals: V-terminalswith V-clamps 240 mm2 6,6 kg

EBV333TM2 Cable terminals: screw terminals with pressed nuts M12 6,5 kg

EBV333TW1 Cable terminals: 2V-terminals with double V-clamps 240 mm2 7,2 kg

EBV333TV0 Cable terminals: V-terminals without V-clamps 6,3 kg

EBV333TW0 Cable terminals: 2V-terminals without double V-clamps 6,7 kg

Description EBV3 / 185 mm

Rated thermal current Ith=In

with fuse links 630 A

Rated thermal current Ith with solid links 750 A

Rated voltage Un

690 V a.c.

Utilisation category AC-22B AC-23B AC-21B

Rated switching voltage Ue 500 V a.c. 400 V a.c. 690 V a.c.

Rated switching current Ie 630 A

Rated short circuit making current 80 kA (690 V a.c.)

100 kA (500 V a.c.)

Rated short circuit withstand current 100 kA

Rated insulation voltage Ui 1000 V a.c.

Rated impulse withstand voltage Uimp. 12 kV

Rated short time withstand current Icw 121

/152 kA

Rated frequency 50-60 Hz

Mechanical durability (Number of cycles) 1000

Electrical durability (Number of cycles) 200

IP degree of protection 30 IP

Compatible NH Fuse link body size 3

Accessories see page 73

1) for disconnectors 1-phase disconnected

2) for disconnectors 3-phase disconnected

EBV3 - Catalogue numbers

EBV3 - Terminal clamps details

Description EBV 3 V-clamps EBV 3 Double V-Clamps EBV 3 M12 Screws

Clamp V-clamp 35-300SW-B V-clamp HS 2/35 240-C M12 screw (pressed nut)

Outline drawing

Cross section of

conductors

V-clamp for direct fixing of conductor with busbar end with cross section of:

35 - 185 mm2 35 - 240 mm2 35 - 185 mm2 35-240 mm2

35 - 240 mm2 35 - 300 mm2 35 - 240 mm2 35 - 300 mm2

Tightening torque 30 Nm 40Nm 56 Nm

EATON Bussmann series NH Gear catalogue 63

EBV

Description EBV 2-x-NL (400 A) EBV 2-x-NR (400 A) EBV 3-x-NL (630 A) EBV 3-x-NR (630 A)

Clamp M12 screw M12 screw M12 screw M12 screw

Outline drawing

Lateral busbar terminal Left side Right side Left side Right side

Tightening torque 56 Nm 56 Nm 56 Nm 56 Nm

EBV2 and EBV3 Fuse switch disconnector with lateral busbar terminal*

EBV2 and EBV3 - Technical data

Description EBV2 EBV3

Rated thermal current Ith=In 400 A 630 A

Rated voltage Un 690 V a.c. 690 V a.c.

Utilisation category AC-22B AC-22B

Rated switching voltage Ue 690 V a.c. 500 V a.c.

Rated switching current Ie 400 A 630 A

Rated short circuit making current 100 kA 100 kA

Rated short circuit withstand current 100 kA 100 kA

Rated insulation voltage Ui 1000 V a.c. 1000 V a.c.

Rated impulse withstand voltage Uimp. 12 kV 12 kV

Rated frequency 50-60 Hz 50-60 Hz

Mechanical durability (number of cycles) 1000 1000

Electrical durability (number of cycles) 200 200

IP degree of protection (IP) 30 30

Compatible NH Fuse link body size 2 3

Accessories see page 73

185 mm busbar system Weight

Fuse switch disconnectors EBV2 - 400A

Three-pole switching - each phase independently

EBV233SM2-L Cable terminals: screw terminals with pressed nuts M12, lateral busbar terminal - left side 5,1 kg

EBV233SM2-R Cable terminals: screw terminals with pressed nuts M12, lateral busbar terminal - right side 5,1 kg

Three-pole switching - all phases simultaneously

EBV233TM2-L Cable terminals: screw terminals with pressed nuts M12, lateral busbar terminal - left side 5,1 kg

EBV233TM2-R Cable terminals: screw terminals with pressed nuts M12, lateral busbar terminal - right side 5,1 kg

Fuse switch disconnectors EBV3 – 630 A

Three-pole switching - each phase independently

EBV333SM2-L Cable terminals: screw terminals with pressed nuts M12, lateral busbar terminal - left side 5,9 kg

EBV333SM2-R Cable terminals: screw terminals with pressed nuts M12, lateral busbar terminal - right side 5,9 kg

Three pole switching - all phases simultaneously

EBV333TM2-L Cable terminals: screw terminals with pressed nuts M12, lateral busbar terminal - left side 5,9 kg

EBV333TM2-R Cable terminals: screw terminals with pressed nuts M12, lateral busbar terminal - right side 5,9 kg

Fuse switch disconnectors EBV3 – 1250 A

Three pole switching - all phases simultaneously

EBV3-1250-3-2M-L Switch-disconnector 1250 A , equipped with solid-links 1250 A

Cable terminals: screw terminals with pressed nuts M12, lateral busbar terminal - left side 7 kg

EBV3-1250-3-3M-R Switch-disconnector 1250 A , equipped with solid-links 1250 A

Cable terminals: screw terminals with pressed nuts M12, lateral busbar terminal - right side 7 kg

EBV2 and EBV3 with lateral busbar terminals terminal clamps details

Lateral busbar terminals

EBV2 and EBV3 - Catalogue numbers

*EBV 2 and 3 with lateral busbar terminal available upon request. Please contact Eaton’s application engineering department for further details:

buletechnical@eaton.com

64 EATON Bussmann series NH Gear catalogue

EBV

Electronic fuse monitoring module

Fuse switch disconnector can be equipped with electronic fuse

monitoring module. Fuse link status (operational, operated, loss

of voltage) is indicated by light-emittng diodes and status of relay

contacts.

Principle of operation

• L1, L2, L3 diodes are on - all three phases are supplied, all fuse

links are operational. Relay contacts: [21..22] - closed; [13..14]

- opened

• L1, L2, L3 diodes are flashing - all three phases are supplied,

fuse links operated Relay contacts: [21..22] - opened; [13..14]

- closed

• L1, L2, L3 diodes are off - two or more phases are not supplied

or fuse links are removed. Relay contacts: [21..22] - opened;

[13..14] – closed

Nominal parameters

• Operating voltage AC - 400 - 690 V, 40-60 Hz;

• Relay parameters 5 A , 250 V~

5 A 250 V AC

Diode

EBV with electronic fuse monitoring module

EBV with electronic fuse monitoring module available upon request. Please contact Eaton’s application engineering department for further details:

buletechnical@eaton.com

EATON Bussmann series NH Gear catalogue 65

EBV

Catalogue number Description Weight

Fuse switch disconnectors EBV2 - 400 A

For installation on 185 mm busbar system, one pole switching - each phase independently

EBV233SV1-E Cable terminals: V-terminals with V-clamps 240 mm2 5,9 kg

EBV233SM1-E Cable terminals: screw terminals with pressed nuts M10 5,8 kg

EBV233SW1-E Cable terminals: 2V-terminals with double V-clamps 240 mm2 6,5 kg

EBV233SV0-E Cable terminals: V-terminals without V-clamps 5,6 kg

EBV233SW0-E Cable terminals: 2V-terminals without double V-clamps 6,0 kg

For installation on 185 mm busbar system, three pole switching - all phases simultaneously

EBV233TV1-E Cable terminals: V-terminals with V-clamps 240 mm2 5,9 kg

EBV233TM1-E Cable terminals: screw terminals with pressed nuts M10 5,8 kg

EBV233TW1-E Cable terminals: 2V-terminals with double V-clamps 240 mm2 6,5 kg

EBV233TV0-E Cable terminals: V-terminals without V-clamps 5,6 kg

EBV233TW0-E Cable terminals: 2V-terminals without double V-clamps 6,0 kg

Fuse switch disconnectors EBV3 – 630 A

For installation on 185 mm busbar system, one pole switching - each phase independently

EBV333SV1-E Cable terminals: V-terminals with V-clamps 240 mm2 6,7 kg

EBV333SM2-E Cable terminals: screw terminals with pressed nuts M12 6,6 kg

EBV333SW1-E Cable terminals: 2V-terminals with double V-clamps 240 mm2 7,3 kg

EBV333SV0-E Cable terminals: V-terminals without V-clamps 6,4 kg

EBV333SW0-E Cable terminals: 2V-terminals without double V-clamps 6,8 kg

For installation on 185 mm busbar system, three pole switching - all phases simultaneously

EBV333TV1-E Cable terminals: V-terminals with V-clamps 240 mm2 6,7 kg

EBV333TM2-E Cable terminals: screw terminals with pressed nuts M12 6,6 kg

EBV333TW1-E Cable terminals: 2V-terminals with double V-clamps 240 mm2 7,3 kg

EBV333TV0-E Cable terminals: V-terminals without V-clamps 6,4 kg

EBV333TW0-E Cable terminals: 2V-terminals without double V-clamps 6,8 kg

Catalogue numbers

EBV with electronic fuse monitoring module

EBV with electronic fuse monitoring module available upon request. Please contact Eaton’s application engineering department for further details:

buletechnical@eaton.com

66 EATON Bussmann series NH Gear catalogue

EBV

CLOSED

OPENED PARKED

EBV00 / 100 mm , EBV00-1 , EBV00-3

49.8

50 100 100 84.5 39.5 38

8,5x16 ø 8.5

40.6

39.6

240 163

127

423

172.5

113.5

EBV Vertical fuse switch disconnectors - Outline drawings (mm)

EATON Bussmann series NH Gear catalogue 67

EBV

OPENED PARKED

49.5

EBV WITH HEIGHTENED RAILS

1-phase

3-phase 1-phase 3-phase 1-phase 3-phase 1-phase 279.5 279.5 705 39.5 40 185 185 297.5

44 45

40 40

705

279.5

49.5

133.7

106

133.7

106

185 185

297.5

44 45

134

15.5

141.5

186 185 196 204 165

165

172.5 172.5

EBV00/100 mm , EBV00-1 , EBV00-3 Closed 3-phase

EBV Vertical fuse switch disconnectors - Outline drawings (mm)

CLOSED

3-phase

68 EATON Bussmann series NH Gear catalogue

EBV

220

225

220

230

EBV2 and EBV3

175

135

185 185 40

305

ø 14

18,5 53,5

150

665

185 92

175

135

185

665

185

18,5 53,5

150

ø 14

92 185 185

305

170

135

185

665

185

150

18,5 53,5

EBV Vertical fuse switch disconnectors - Outline drawings (mm)

EATON Bussmann series NH Gear catalogue 69

EBV

EBV Vertical fuse switch disconnectors - Outline drawings (mm)

EBV2-E, EBV3-E Electronic module 157,5 183,5 185 185 185 185 183,5 756 183,5 185 185 185 185 183,5 756

157,5

175

135

185 185

702

150

5 67

ø 14

92 185 185

305

178

EBV3 with terminals 2V (2 x 240 mm2

)

70 EATON Bussmann series NH Gear catalogue

EBV

EBV2 , EBV3 with lateral busbar terminal

ø 14

92 185 185

ø 14

92 185 185

548

175

135

185 185

600

175

135

185 185

600

548

EBV Vertical fuse switch disconnectors - Outline drawings (mm)

EATON Bussmann series NH Gear catalogue 71

EBV

EBV00, EBV00 / 100 mm

EBFVA1 - M8 Terminal screw

M8 terminal screw, for connection

of conductors with lug terminal

(set - 3 pcs.)

EBFVA2 - Busbar shroud

Busbar shroud (polycarbonate)

for busbar system 185 mm, Width 50 mm,

length 562 mm, thickness 3 mm

EBFVA4 - Isolating pin

Isolating pin for fixing the 50 mm busbar

shroud, M8 (set – 2 pcs.)

EBFVA6 - S-Bridge clamp

S-Bridge clamp – fixed with

2 x M5 screw - for connection

of conductors with cross-section

4 mm2

up to 70 mm2

(set – 3 pcs.)

EBFVA7 - V-shape clamp

V-shape clamp – S-bridge clamp + V-shape

saddle - for connection of sector-shaped

conductors with cross-section 1,5 up to

70 mm2

(stranded) or 95 mm2

(solid) (set - 3 pcs.)

EBFVA8 - Universal earthing device

Universal earthing device

for EBV 00, 2, 3

EBFVA32 - V-Clamp 25-120 SW

V-clamp 25-120 SW. For connection of conductor with cross-section:

16 - 95 mm2 16 - 95 mm2

25 - 120 mm2 25 - 120 mm2

EBFVA9 - V-clamp HM-10-120

V-clamp HM-10-120. For connection of

conductor with cross-section:

10 - 70 mm2 10 - 70 mm2

25 - 120 mm2 25 - 95 mm2

EBFVA3 - Hooked clamps

Hooked clamps for installation of EBV

on busbar system without drilled holes.

(set - 3 pcs.)

EBV00 / 100 mm

EBFVA33 - Micro switch

Micro switch for fuse link cover position

monitoring (0-1) of EBV 00/100mm

EBFVA34 - Support angle

Support angle for installation of busbar

shroud

EBV Vertical fuse switch disconnectors - Accessories

EBV00 / 100 mm

EBFVA35 - Labelling area

Labelling area

EBFVA10 - Terminal shroud/adjusting shroud

Terminal shroud/adjusting shroud. When

fixed top and bottom of EBV 00/100 mm it

adjusts its length and height to that of EBV

2, 3 enclosure

EBFVA36 - Extended terminal shroud/adjusting shroud

Extended terminal shroud/adjusting shroud.

Together with two shrouds it adjusts the

length and height of EBV 00/100 mm to that

of EBV 1, 2, 3 with terminal shroud

EBFVA37 - Extended terminal shroud/adjusting shroud

Extended terminal shroud/adjusting shroud.

When fixed to shroud it adjusts the length

and height of EBV 00/100 mm to that of EBV

2, 3 with label holder 53-945826-011.

EBFVA11 - Single adaptor

Single adaptor 100/185 enabling

to install EBV 00/100 mm on busbar

system 185 mm

EBFVA12 - Double adaptor

Double adaptor 100/185 enabling

to install two EBV 00/100 mm units on

busbar system 185 mm

EBV00

EBFVA15 - Single distance adaptor

Single distance adaptor 185/185.

It adjusts front line of EBV 00 to that of EBV

2,3 (set – 3 pcs.)

EBFVA14 - Double distance adaptor

Double distance adaptor 185/185. Designed

for two EBV 00 units. It adjusts front line of

EBV 00 to that of EBV 2,3 (set – 3 pcs.)

EBFVA16 - Terminal shroud

Terminal shroud

EBFVA38 - Hooked clamps

Hooked clamps for installation

of EBV with heightened rails

on busbar system without drilled

holes. (set - 3 pcs.)

72 EATON Bussmann series NH Gear catalogue

EBV

EBV2 , EBV3 , EBV630 kVA , EBV1250

EBFVA25 - Busbar shroud

Busbar shroud (polycarbonate) for busbar

system 185 mm, width 100 mm, length

562 mm, thickness 3 mm

EBFVA26 - Isolating pin

Isolating pin for fixing

the 50 mm busbar shroud, M12

(1 set – 2 pcs.)

EBFVA27 - Terminal shroud

Terminal shroud

EBFVA28 - Extended terminal shroud

Extended terminal shroud, for use with

terminal shroud below

EBFVA29 - Terminal protective cover

Terminal protective cover

EBFVA8 - Universal earthing device

Universal earthing device

for EBV 00, 2, 3

EBFVA39 - Label holder

Label holder

EBV2 , EBV3 , EBV630 kVA , EBV1250

Terminal screw

For connection of conductors with lug

terminal (1 set- 3pcs)

EBFVA17 - M10 terminal screw for EBV1 and EBV2

EBFVA18 - M12 terminal screw for EBV3

EBFVA19 - V-clamp

V-clamp. For connection of conductor

with cross-section:

35 - 120 mm2 35 - 150 mm2

35 - 240 mm2 35 - 300 mm2

EBFVA20 - V-clamp

V-clamp. For connection of conductor

with cross-section:

35 - 185 mm2 35 - 240 mm2

35 - 240 mm2 35 - 300 mm2

EBFVA21 - Double V-clamp

Double V-clamp. For connection of two

conductors with cross-section:

35 - 185 mm2 35 - 240 mm2

35 - 240 mm2 35 - 300 mm2

EBFVA23 - V-clamp HS

V-clamp HS (steel) for connection of two

conductors with cross-section

35 - 185 mm2 35 - 240 mm2

35 - 240 mm2 35 - 300 mm2

EBFVA24 - Hooked clamps

Hooked clamps for installation

of EBV 2, 3 on busbar system without

drilled holes

(1 set - 3 pcs.)

EBV Vertical fuse switch disconnectors - Accessories

EATON Bussmann series NH Gear catalogue 73

Low voltage — NH DIN Industrial fuse links gG

400 Volts gG 500 Volts gG 690 Volts gG

Catalogue numbers with conducting

metal gripping lugs

(amp)NHG(size)B-400 (amp)NHG(size)B (amp)NHG(size)B-690

Catalogue numbers with insulated metal

gripping lugs

(amp)NHG(size)BI-400 (amp)NHG(size)BI (amp)NHG(size)BI-690

Fuse link body size 000 to 3 000 to 4 000 to 4

Rated voltage 400 V a.c. 500 V a.c. 690 V a.c.

Rated current 2 to 630 A 2 to 1250 A 2 to 800 A

Operating Class gG gG gG

Breaking capacity 120 kA AC

Fuse bases Single pole SD -D DIN-Rail mounted and SD-S Screw mounting or TD-D DIN-Rail mounted (data sheet 10163)

Fuse switches Fuse switch disconnectors vertical EBV and horizontal EBH (data sheets 10292 and 10293)

Fuse rail Fuse rail vertical EBF (data sheet 10240)

Standards IEC 60269-1 and 2, VDE 0636, DIN 43620 and CE

Applications Alternative energy, utilities, industrial and motor applications

NH DIN Fuse links overview

Description

A square bodied range of NH DIN industrial fuse links for

a wide variety of applications.

Features and benefi ts

• Comprehensive portfolio: Standard metal gripping lugs

and insulated metal gripping lugs versions are available

• Reliability: Dual indication for more reliable fault finding.

• Safety: Lead and cadmium free – they are RoHS and

REACH compliant (not dangerous or hazardous for the

environment).

• Energy efficient solutions: Class leading watts loss –

helping to improve network efficiencies.

Standards

IEC 60269-1 and 2, VDE 0636, DIN 43620 and CE.

Data sheets: 400V gG: 720099, 500V gG 10164, 690V gG 720109, 500 and 690V aM: 10165

74 EATON Bussmann series NH Gear catalogue

Low voltage — NH DIN Industrial fuse links aM

500/690 Volts aM

Catalogue numbers with conducting

metal gripping lugs

500 Volts: (amp)NHM(size)B

690 Volts: (amp)NHM(size)B-690

Catalogue numbers with insulated metal

gripping lugs

N/A

Fuse link body size 000 to 3

Rated voltage 500 and 690 V a.c.

Rated current 6 to 500 A

Operating Class aM

Breaking capacity 120 kA AC

Fuse bases Single pole SD -D DIN-Rail mounted and SD-S Screw mounting or TD-D DIN-Rail mounted (data sheet 10163)

Fuse switches Fuse switch disconnectors vertical EBV and horizontal EBH (data sheets 10292 and 10293)

Fuse rail Fuse rail vertical EBF (data sheet 10240)

Standards IEC 60269-1 and 2, VDE 0636, DIN 43620 and CE

Applications Alternative energy, utilities, industrial and motor applications

Data sheets: 400V gG: 720099, 500V gG 10164, 690V gG 720109, 500 and 690V aM: 10165

Low voltage — NH DIN Industrial fuse links range overview Voltage (V a.c.) Class Size

Amps

2 4 6 10 16 20 25 32 35 40 50 63 80 100 125 160 200 224 250 300 315 355 400 425 450 500 630 800 1000 1250

400

000 2 4 6 10 16 20 25 32 35 40 50 63 80 100

00 125 160

01 35 40 50 63 80 100 125 160

1 200 224 250

02 35 40 50 63 80 100 125 160 200 224 250

2 315 355 400 630

03 250 315 355 400

3 500 630

500

000 2 4 6 10 16 20 25 32 35 40 50 63 80 100

00 50 63 80 100 125 160

0 6 10 16 20 25 32 35 40 50 63 80 100 125 160

01 6 10 16 20 25 32 35 40 50 63 80 100 125 160

1 50 63 80 100 125 160 200 224 250 315 355

02 35 40 50 63 80 100 125 160 200 224 250

2 250 300 315 355 400 425 450 500

03 250 315 355 400

3 315 355 400 425 450 500 630 800

4 500 630 800 1000 1250

690

000 2 4 6 10 16 20 25 32 35 40 50 63

00 50 63 80 100 125 160

1 50 63 80 100 125 160 200 224 250

2 200 224 250 315

3 250 315 355 400 425 500

4 630 800

500 and 690

000 6 10 16 20 25 32 35 40 50

00 63 80 100

1 50 63 80 100 125 160

2 125 160 200 224 250 315 355

3 315 355 400 500

: Part available, for example Size 00 400 V is available in 125 and 160A

EATON Bussmann series NH Gear catalogue 75

Index

Catalogue number Page Catalogue number Page Catalogue number Page

EBC00013TBF 25 EBFVA36 72 EBH1O3TS8 35

EBC00013TTF 25 EBFVA37 72 EBH1O3TS8ͲBE 41

EBC0003TFͲD125 25 EBFVA38 72 EBH1O3TS8ͲTE 41

EBC0003TFͲD150 25 EBFVA39 73 EBH1O3TSV 35

EBC000O3TF 25 EBFVA4 17 and 72 EBH1O3TV1 35

EBF00230S8 9 EBFVA6 17 and 72 EBH1O3TVM 35

EBF00230V0 9 EBFVA7 17 and 72 EBH1O3TVS 35

EBF00230V1 9 EBFVA8 17, 18 and 72 EBH213TBM1 38

EBF00330S8 10 EBFVA9 17 and 72 EBH213TBS8ͲE 41

EBF00330V0 10 EBH00013TBM8 23 EBH213TBV1 38

EBF00330V1 10 EBH00013TBS5 23 EBH213TBW1 38

EBF2330ͲL 14 EBH00013TTM8 23 EBH213TTM1 38

EBF2330M1 12 EBH00013TTS5 23 EBH213TTS8ͲE 41

EBF2330ͲR 14 EBH000O3TM8 23 EBH213TTV1 38

EBF2330V1 12 EBH000O3TM8ͲD 23 EBH213TTW1 38

EBF2330W1 12 EBH000O3TM8L 23 EBH223TBM1 38

EBF3330ͲL 14 EBH000O3TS5 23 EBH223TBS8ͲE 41

EBF3330M1 13 EBH000O3TS5ͲD 23 EBH223TBV1 38

EBF3330ͲR 14 EBH000O3TS5L 23 EBH223TBW1 38

EBF3330V1 13 EBH0013TBF 30 EBH223TTM1 38

EBF3330W1 13 EBH0013TBM8 30 EBH223TTS8ͲE 41

EBFVA1 17 and 72 EBH0013TBS5ͲE 41 EBH223TTV1 38

EBFVA10 17 and 72 EBH0013TTF 30 EBH223TTW1 38

EBFVA11 17 and 72 EBH0013TTM8 30 EBH2O3TM1 38

EBFVA12 17 and 72 EBH0013TTS5ͲE 41 EBH2O3TS8 38

EBFVA13 17 EBH00O3TM8 28 EBH2O3TS8ͲBE 41

EBFVA14 17 and 72 EBH00O3TM8L 28 EBH2O3TS8ͲTE 41

EBFVA15 17 EBH00O3TS5 28 EBH2O3TV1 38

EBFVA16 17 and 72 EBH00O3TS5ͲBE 41 EBH2O3TW1 38

EBFVA17 18 and 73 EBH00O3TS5L 28 EBH313TM2 40

EBFVA18 18 and 73 EBH00O3TS5ͲTE 41 EBH3O3TM2 40

EBFVA19 18 and 73 EBH00O3TV1 28 EBH3O3TS8 40

EBFVA2 17 and 72 EBH113TBM1 35 EBHA1 52

EBFVA20 18 and 73 EBH113TBS8 35 EBHA10 52

EBFVA21 18 and 73 EBH113TBS8ͲE 41 EBHA11 52

EBFVA22 18 EBH113TBV1 35 EBHA12 52

EBFVA23 18 and 73 EBH113TTS8 35 EBHA13 52

EBFVA24 18 and 73 EBH113TTS8ͲE 41 EBHA2 52

EBFVA25 18 and 73 EBH113TTV1 35 EBHA3 52

EBFVA26 18 and 73 EBH123TBM1 35 EBHA4 52

EBFVA27 18 and 73 EBH123TBS8 35 EBHA5 52

EBFVA28 18 and 73 EBH123TBS8ͲE 41 EBHA6 52

EBFVA29 18 and 73 EBH123TBV1 35 EBHA7 52

EBFVA3 17 and 72 EBH123TTM1 35 EBHA8 52

EBFVA31 18 EBH123TTS8 35 EBHA9 52

EBFVA32 72 EBH123TTS8ͲE 41 EBHOO03TV1L 28

EBFVA33 72 EBH123TTV1 35 EBV0011SS8 59

EBFVA34 72 EBH1O3TM1 35 EBV0011SV0 59

EBFVA35 72 EBH1O3TMV 35 EBV0011SV1 59

76 EATON Bussmann series NH Gear catalogue

Index

Catalogue number Page Catalogue number Page

EBV0011TS8 59 EBV333SW1ͲE 66

EBV0011TV0 59 EBV333TM2 63

EBV0011TV1 59 EBV333TM2ͲE 66

EBV0023TS8 58 EBV333TM2ͲL 64

EBV0023TV0 58 EBV333TM2ͲR 64

EBV0023TV1 58 EBV333TV0 63

EBV0033SS8 59 EBV333TV0ͲE 66

EBV0033SV0 59 EBV333TV1 63

EBV0033SV1 59 EBV333TV1ͲE 66

EBV0033TS8 59 EBV333TW0 63

EBV0033TV0 59 EBV333TW0ͲE 66

EBV0033TV1 59 EBV333TW1 63

EBV223SW0 62 EBV333TW1ͲE 66

EBV233SM1 62

EBV233SM1ͲE 66

EBV233SM2ͲL 64

EBV233SM2ͲR 64

EBV233SV0 62

EBV233SV0ͲE 66

EBV233SV1 62

EBV233SV1ͲE 66

EBV233SW0ͲE 66

EBV233SW1 62

EBV233SW1ͲE 66

EBV233TM1 62

EBV233TM1ͲE 66

EBV233TM2ͲL 64

EBV233TM2ͲR 64

EBV233TV0 62

EBV233TV0ͲE 66

EBV233TV1 62

EBV233TV1ͲE 66

EBV233TW0 62

EBV233TW0ͲE 66

EBV233TW1 62

EBV233TW1ͲE 66

EBV3Ͳ1250Ͳ3Ͳ2MͲL 64

EBV3Ͳ1250Ͳ3Ͳ3MͲR 64

EBV333SM2 63

EBV333SM2ͲE 66

EBV333SM2ͲL 64

EBV333SM2ͲR 64

EBV333SV0 63

EBV333SV0ͲE 66

EBV333SV1 63

EBV333SV1ͲE 66

EBV333SW0 63

EBV333SW0ͲE 66

EBV333SW1 63

EATON Bussmann series NH Gear catalogue 77

Notes

78 EATON Bussmann series NH Gear catalogue

Customer Satisfaction team

Eaton's Customer Satisfaction team is available to answer

questions regarding Bussmann series products.

Calls can be made between:

Monday - Thursday 7.30 a.m. - 5.30 p.m. GMT

Friday 7.30 a.m. - 5.00 p.m. GMT

The Customer Satisfaction team can be reached via:

Phone: 00 44 (0) 1509 882 600

Fax: 00 44 (0) 1509 882 786

Email: bulesales@eaton.com

www.my.eaton.com

Tailored just for you. Powerful online tools and resources

get you the up-to-date information you need to work

smarter, make informed decisions and streamline your

transactions with Eaton.

Get started today at www.my.eaton.com by clicking

‘Request User ID and Password’.

• Easy to Navigate

• Simple to Use

• Real-Time Data.

Contact details

Online resources

Visit www.eaton.com/bussmannseries for the following

resources:

• Product cross reference

• Product profiles

• Online catalogues for the latest United States and

European catalogues.

Application engineering

Application Engineering assistance is available to all

customers. The Application Engineering team is staffed by

university-qualified electrical engineers who are available

with technical and application support.

Calls can be made between:

Monday - Thursday 8.30 a.m. - 4.30 p.m. GMT

Friday 8.30 a.m. - 4.00 p.m. GMT

Application Engineering can be reached via:

Phone: 00 44 (0) 1509 882 699

Fax: 00 44 (0) 1509 882 794

General technical enquiries:

buletechnical@eaton.com

High speed technical enquiries:

bulehighspeedtechnical@eaton.com

EATON Bussmann series NH Gear catalogue 79

At Eaton, we’re energized by the challenge of powering a

world that demands more. With over 100 years experience in

electrical power management, we have the expertise to see

beyond today. From groundbreaking products to turnkey design

and engineering services, critical industries around the globe

count on Eaton.

We power businesses with reliable, efficient and safe electrical

power management solutions. Combined with our personal

service, support and bold thinking, we are answering

tomorrow’s needs today. Follow the charge with Eaton.

Visit eaton.com/electrical.

Contact your

local Eaton office

Eaton

Melton Road

Burton-on-the-Wolds

LE12 5TH

Leicestershire

United Kingdom

bulesales@eaton.com

www.eaton.com/bussmannseries

Changes to the products, to the information contained in this

document, and to prices are reserved; so are errors and omissions.

Only order confirmations and technical documentation by Eaton is

binding. Photos and pictures also do not warrant a specific layout or

functionality. Their use in whatever form is subject to prior approval

by Eaton. The same applies to Trademarks (especially Eaton, Moeller,

and Cutler-Hammer). The Terms and Conditions of Eaton apply, as

referenced on Eaton Internet pages and Eaton order confirmations.

快速跳转到指定页