回回回4

KTSL180 HEAVY-LIFTING ANDSLIDING DOOR HARDWARE SYSTEMKTSL180重型提升推拉系统

Technical Feature Analysis

Small footprint, large door leaf opening

The lifting sliding door has the same characteristics as the replacement sliding door, occupying less space when opened.

The maximum suitable opening width for a single question sliding door can reach about 6500, and the maximum fan width can reach 3000mm,

• Flexible movement

Small opening force, easy push control after opening.

• Wide application of lifting doors

Suitable for balcony doors, sunroom doors, corner doors, etc.

• Heavy weight when opening the room

The weight of the fan is determined by the carrying capacity and quantity.

Good anti-theft performance

Adopting the combination of anti-theft positioning block and transmission group.

• High sealing performance

Using rubber strips for sealing, the sealing performance is higher than that of traditional Italian strips on sliding doors.

Seal the overlapping area of the two fans to address the issue of wind bridges.

技术特点分析

·占地空间小，门扇开启扇大

提升推拉门同替道推拉门特点一致，在开启时占据的空间小。

单题推拉门最大适合的淌口宽度可以达到约6500，扇宽最大可达到3000mm，

·运动灵活

开启力小，开启后轻松推控。

·提升门应用广泛

适用于阳台门、阳光房门，隅断门等。

·开启房重量大

开启扇重量由承重量和数量决定。

·防盗性好

采用防盗定位块和传动群的配合。

·密封性高

采用胶条密封，比推拉门传统意文上的毛条密封性高。
在两扇重叠的部位采用密封解决风桥问惩。

HEAVY DUTYFRICTION STAY

SERIES重型系列铰链

14 INCH 6.0MM HIGH-STRENGTH HEAVY-DUTY HOME DECORATION REARSLIDING BRACE (OPTIONAL 4.0MM, BEARING 60KG)

14寸 6.0mm 高强度重型家装后拉滑撑(可选 4.0mm,承重 60KG)

ZPD2214HL-L/R

技术参数 Technical Parameter

最大扇高Maximum Fan Height

1500mm

最大扇宽Maximum Fan Width

750mm

6.0mm 最大承重Maximum Fan Height

75 KG

最大开启角度
Maximum Opening Angle
<80°

产品安装尺寸(单位unit:mm) ProductInstallation Dimensions

1. 适用于 C 槽
2.产品材质：不锈钢304
3. 使用范围：平开窗

·选用最优质不锈钢304制造；

·五万次循环测试后仍能操作正常；

·符合BS6375英国门窗性能测试标准;

·符合JG/T127-2017《建筑门窗五金件-滑撑》标准。

1. Suitable for C tank
2. Product material: stainless steel 304
3. Application scope: casement window

• Made of the highest quality stainless steel 304;
• After 50000 cycles of testing, it can still operate normally;
• Complies with BS6375 British door and window performance testing standards;
• Complies with JG/T127-2017 "Hardware for Building doors and Windows - Sliding Braces" standard.

家中的每一扇门窗，都是德国工艺的见证，质感生活的开始。

Every door and window in the home is a witness to German craftsmanship and the beginning of a textured life.

12 INCH HEAVY-DUTY FLAT BRACE - LEFT AND RIGHT12 寸重型平开撑 - 左右ZPD2212B-L/R

技术参数 Technical Parameter

最大扇高Maximum Fan Height

1400mm

最大扇宽Maximum Fan Width

700mm

最大承重Maximum Fan Height

45KG

最大开启角度
Maximum Opening Angle
<84°

产品安装尺寸(单位 unit:mm) Product Installation Dimensions

1. 适用于 C 槽

2.产品材质：不锈钢304

3.使用范围：平开窗

·选用最优质不锈钢304制造；

·五万次循环测试后仍能操作正常；

·符合BS6375英国门窗性能测试标准;

·符合JG/T127-2017《建筑门窗五金件-滑撑》标准。

1. Suitable for C tank
2. Product material: stainless steel 304
3. Application scope: casement window

• Made of the highest quality stainless steel 304;
• After 50000 cycles of testing, it can still operate normally;
• Complies with BS6375 British door and window performance testing standards;
• Complies with JG/T127-2017 "Hardware for Building doors and Windows - Sliding Braces"standard.

FPS2212K-L/R

22F12 INCH HEAVY-DUTY FLAT BRACE - LEFT AND RIGHT
22F12寸重型平开撑-左右

最大扇高Maximum Fan Height

1400mm

最大扇宽
Maximum Fan Width
700mm
最大承重
Maximum Fan Height
45KG
最大开启角度
Maximum Opening Angle
<45°/88°

产品安装尺寸(单位 unit:mm) Product Installation Dimensions

技术参数 Technical Parameter

1. 适用于 K槽

·选用最优质不锈钢304制造；

2.产品材质：不锈钢304

·五万次循环测试后仍能操作正常；

3. 使用范围：平开窗

·符合BS6375英国门窗性能测试标准；

·符合JG/T127-2017《建筑门窗五金件-滑撑》标准。

1. Suitable for K tank

2. Product material: stainless steel 304

3. Application scope: casement window

• Made of the highest quality stainless steel 304;

• After 50000 cycles of testing, it can still operate normally; • Complies with BS6375 British door and window performance testing standards;

• Complies with JG/T127-2017 "Hardware for Building doors and Windows - Sliding Braces" standard.

产品安装尺寸(单位 unit:mm) Product Installation Dimensions

技术参数 Technical Parameter

1. 适用于 K 槽

2.产品材质：不锈钢304

·选用最优质不锈钢304制造；

3. 使用范围：平开窗

·五万次循环测试后仍能操作正常；

·符合BS6375英国门窗性能测试标准；

·符合JG/T127-2017《建筑门窗五金件-滑撑》标准。

1. Suitable for C tank

2. Product material: stainless steel 304

3. Application scope: casement window

• Made of the highest quality stainless steel 304; •After 50000 cycles of testing, it can still operate normally; •Complies with BS6375 British door and window performance testing standards; •Complies with JG/T127-2017 "Hardware for Building doors and Windows - Sliding Braces" standard.

FPS2212YB-L/R

13.5F12 INCH HEAVY-DUTY FLAT BRACE - LEFT AND RIGHT
13.5F12寸重型平开撑-左右

最大扇高Maximum Fan Height1400mm

1. 适用于 K 槽
2. 产品材质：不锈钢 304
3. 使用范围：平开窗

·选用最优质不锈钢304制造；
·五万次循环测试后仍能操作正常；
·符合BS6375英国门窗性能测试标准；
·符合JG/T127-2017《建筑门窗五金件-滑撑》标准。

1. Suitable for K tank
2. Product material: stainless steel 304
3. Application scope: casement window

1. 适用于 C 槽
2.产品材质：不锈钢304
3. 使用范围：平开窗
·选用最优质不锈钢304制造；
·五万次循环测试后仍能操作正常；
·符合BS6375英国门窗性能测试标准；
·符合JG/T127-2017《建筑门窗五金件-滑撑》标准。

1. Suitable for C tank
2. Product material: stainless steel 304
3. Application scope: casement window

KYJ19

最大扇高Maximum Fan Height1400mm

最大扇宽
Maximum Fan Width
650mm
最大承重
Maximum Fan Height
80KG
最大开启角度
Maximum Opening Angle
<86°

技术参数 Technical Parameter

1. 适用于 C 槽
2.产品材质：不锈钢304
3. 使用范围：平开窗

·选用最优质不锈钢304制造；

·五万次循环测试后仍能操作正常；

·符合BS6375英国门窗性能测试标准；

·符合JG/T127-2017《建筑门窗五金件-滑撑》标准。

1. Suitable for C tank
2. Product material: stainless steel 304
3. Application scope: casement window

• Made of the highest quality stainless steel 304;
• After 50000 cycles of testing, it can still operate normally; • Complies with BS6375 British door and window performance testing standards;
• Complies with JG/T127-2017 "Hardware for Building doors and Windows - Sliding Braces" standard.

KYJ20

最大扇高Maximum Fan Height1400mm

最大扇宽
Maximum Fan Width
650mm
最大承重
Maximum Fan Height
80KG
最大开启角度
Maximum Opening Angle
<86°

技术参数 Technical Parameter

1. 适用于 C 槽
2.产品材质：不锈钢304
3. 使用范围：平开窗

·选用最优质不锈钢304制造；

·五万次循环测试后仍能操作正常；

·符合BS6375英国门窗性能测试标准；

·符合JG/T127-2017《建筑门窗五金件-滑撑》标准。

1. Suitable for C tank
2. Product material: stainless steel 304
3. Application scope: casement window

• Made of the highest quality stainless steel 304; • After 50000 cycles of testing, it can still operate normally; • Complies with BS6375 British door and window performance testing standards; • Complies with JG/T127-2017 "Hardware for Building doors and Windows - Sliding Braces" standard.

TRANSMISSIONROD SERIES传动杆系列

KE-CD09

传动锁闭器产品规格(中心距：22mm)，外开

Product specifications for transmission lock (center distance: 22mm), external opening

KE-CD04

传动锁闭器产品规格(中心距：7.5mm)，用于内平开窗

Product specifications for transmission lock (center distance: 7.5mm), used for internal casement windows

HANDLE-STAR

SYSTEM星辰执手系列

KFY-01

Dimensions外观尺寸/mm

KFY-01B

Dimensions外观尺寸/mm

KFY-02

Dimensions外观尺寸/mm

KFY-02B

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

KFZ21

Dimensions外观尺寸/mm

KEF22

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

KFZ23B-L/R

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

KEF12-L/R

Dimensions外观尺寸/mm

KEF15-L/R

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

KEF18-L/R

KEF19

KEF20

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

KFZ41 L/R<br>KFZ32

KFZ34 L/R

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

Dimensions外观尺寸/mm

KFZ37A

Dimensions外观尺寸/mm

KFZ38A L/R

Dimensions外观尺寸/mm

KFZ25

可选Optional

→

Dimensions外观尺寸/mm

KFZ35 L/R

可选Optional

0

Dimensions外观尺寸/mm

KFZ27

可选Optional

→

Dimensions外观尺寸/mm

KFZ39 L/R

可选Optional

Dimensions外观尺寸/mm

→

KFZ37B

可选Optional

Dimensions外观尺寸/mm

→

KFZ38B L/R

Dimensions外观尺寸/mm

可选Optional

→

STAINLESSS STEELHANDLE-STARSYSTEM星辰全不锈钢执手系列

精铸不锈钢材质

盐雾测试可以达到 240h

STAR SERIES ALLSTAINLESSSTEEL HANDLE星辰全不锈钢执手系列

精铸不锈钢材质

盐雾测试可以达到240h

KFZ-P1014

精铸钢 Precision cast steel

KEF04 精铸钢 Precision cast steel

KEF05 精铸钢 Precision cast steel

STAR SERIES PRECISION CAST STEEL STAINLESS STEEL HANDLE SERIES

星辰精铸钢不锈钢执手系列

精铸不锈钢材质

盐雾测试可以达到240h

KEF03

精铸钢 Precision cast steel

Dimensions外观尺寸/mm

KEF01

精铸钢 Precision cast steel

Dimensions外观尺寸/mm

KEF02

精铸钢 Precision cast steel

Dimensions外观尺寸/mm

KFY-001

胡木色灰色Humusen grey

Dimensions外观尺寸/mm

KFY-001

胡桃色银色Nut-brown silvery

Dimensions外观尺寸/mm

KFY-002

浅胡桃古铜色 Light walnut antique bronze color

Dimensions外观尺寸/mm

KFY-002 原木色银色 Wood color silver

Dimensions外观尺寸/mm

KFY-003

Dimensions外观尺寸/mm

KFY-004

Dimensions外观尺寸/mm

KFY-005

Dimensions外观尺寸/mm

JZS929（C 槽）锌合金(C slot) Zinc alloy

JZS929（K槽）锌合金 (K-slot) zinc alloy

JZS924（C 槽）不锈钢(C slot) stainless steel

JZS924（K槽）不锈钢 (K-slot) stainless steel

KLG18D-250
静音杆
Silent pole
KLG18D-400
静音杆
Silent pole

714 不锈钢锁盒(单向)

适配有基座执手/无基座执手
Equipped with a base handle/without a base handle
中心距 Center distance:
11/13/15/18/20mm

621 不锈钢锁盒(双向)

适配有基座执手/无基座执手
Equipped with a base handle/without a base handle
中心距 Center distance:
10/12/15/18/20/23/25/28/30mm

620 不锈钢锁盒(双向)

适配有基座执手/无基座执手
Equipped with a base handle/without a base handle
中心距 Center distance:
10/12/15/18/20/22.5/25/27.5/30mm

715 不锈钢锁盒(双向)

适配有基座执手
Equipped with a base handle
中心距 Center distance:
6.5/7.5/15/18/20/25mm，实际中心距+5mm

623 不锈钢锁盒(双向)

适配有基座执手 Equipped with a base handle 中心距 Center distance: 6.5/7.5/15/18/20/25mm

本目录各项产品颜色因印刷及摄影之故，与实物可能有所差异，请事先了解。
本目录所有产品，以实物为准，如有更改，恕不另行通知。
本目录版权所有，翻版必究。

All colors of the articles listed in the catalogue may differ from that of the real objects due to photography

and printing process.

All articles listed in the catalogue are subject to the objets, should any change correction and alteration on

All rights reserved, no copy allowed.

them be occurred, please be noted that it should not be our obligation to inform you of it.

Official Account

E-catalog

Zhaoqing Keyi Metal Manufacturing Co., Ltd 肇庆市科艺金属制品有限公司

Add: Jintao Industrial Park, Jinli Town, Gaoyao District, Zhaoqing City, Guangdong Province, China-526105.