Technical Datasheet ASW08kH-T3 ASW10kH-T3 ASW12kH-T3 PV input

Max. PV array power 12000 Wp 15000 Wp 18000 Wp

Max. input voltage 1100 V 5

MPP voltage range / rated input voltage 200 V - 950 V / 630 V 3

Min. input voltage / start voltage 60 V / 180 V

No. of independent MPPT trackers / strings per MPPT input 3 / 1

Max. input current / Max. power per MPP tracker 16 A / 10000 W

Max. short-circuit current per MPP tracker 24 A

Battery input

Battery voltage range 120 V - 600 V 5

Max. charge / discharge power 8000 W 10000 W 12000 W

Max. charge / discharge current 30 A 5

Battery type LiFePO4

AC input

Rated grid voltage 3/N/PE / 380 V / 400 V / 415 V

Rated grid frequency 50 Hz / 60 Hz

Max. input power from grid 16000 W 20000 W 24000 W

Max. input current from grid 23.2 A 29.0 A 34.8 A

AC output

AC voltage range / Nominal AC voltage 220 V - 480 V / 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V

Rated AC grid frequency 50 Hz / 60 Hz

AC grid frequency range 45 Hz - 55 Hz / 55 Hz - 65 Hz

Rated apparent power 8000 VA 10000 VA 12000 VA

Max. apparent power 8000 VA 10000 VA 12000 VA

Rated grid output current (@400 V) 11.6 A 14.5 A 17.4 A

Max. grid output current(@400 V) 12.8 A 16.0 A 19.2 A

Power factor at rated power / adjustable displacement 1 / 0.8 leading - 0.8 lagging

Harmonics THDi < 3 % (of nominal power)

EPS output

Nominal output voltage 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V

Nominal output frequency 50 Hz / 60 Hz

Rated apparent power 8000 VA 10000 VA 12000 VA

Rated current (@400 V) 11.6 A 14.5 A 17.4 A

Max. current (@400 V, continuous on-grid / off-grid) 23.2 A / 11.6 A 29.0 A / 14.5 A 34.8 A / 17.4 A

Max. power on each phase (@400 V, continuous on-grid / off-grid) 5333 W / 2667 W 6667 W / 3333 W 8000 W / 4000 W

Peak output apparent power (@400 V, continuous on-grid / off-grid up to 10s) 16000 VA / 16000 VA 20000 VA / 20000 VA 24000 VA / 24000 VA

Max. switch time < 10 ms

Output THDv (@ Linear load) 2 %

Effi- ciencyMPPT efficiency 99.9 %

European efficiency / Max. efficiency 97.2 % / 98.0 % 97.9 % / 98.4 %

Safety protection

DC surge protection( Type II, according to EN/IEC 61643-11) ●

Insulation resistance detection ●

PV string input reverse polarity protection ●

Battery input reverse polarity protection ●

Ground fault monitoring ●

Residual current monitoring unit ●

AC short circuit protection ●

Anti-islanding protection ●

Arc fault circuit interrupter (AFCI) ○ 2

General data

Dimensions (W / D / H) 545 / 205 / 465 mm

Weight 26.0 kg

Operating temperature range -25 °C ~ 60 °C

Cooling concept Natural convection

Noise emission < 35 dB

Degree of protection (as per IEC 60529) IP66

Relative humidity 100 %

Max. operating altitude 4000 m

Features

HMI LED, App

BMS interface CAN

Smart meter interface RS485

Communication interfaces Dongle: Wi-Fi (2.4 GHz) / LAN (100 Mbps)

Inverter: RS485 (ModBus RTU), LAN (100 Mbps, ModBus TCP only) 4

Digital output (dry contact) / No. of outputs ● / 2

Digital input (dry contact) / No. of inputs ● / 4

Integrated power control / export power control ● / ●

Certificates (more available upon request)

AS/NZS 4777.2, TOR Stromerzeugungsanlagen Typ A, C10/11, TR 3.3.1, FD C11-519-11, EN 50549-1, EN 61000-6-1, EN 61000-

6-2, EN 61000-6-3, EN 61000-6-4, VDE-AR-N 4105, IEC 60068-2-x, IEC 61683. IEC 61727, IEC 62116, IEC 63027, NTS Type

A. RD 647, UNE 217001, UNE 217002, NA/EEA-NE7, G99-1, PORTARIA Nº 140

● standard features ○ optional features - not available

1 Asymmetrical power output functionality released in August 2024, please confirm version with Solplanet's sales staff before purchase.

2

AFCI functionality released in April 2025, please confirm version with Solplanet's sales staff before purchase.

3 The latest optimised platform design supports MPP voltage range at 150 V - 950 V, pending subsequent certificate updates.

4 Modbus TCP functionality released in April 2025, please confirm version with Solplanet's sales staff before purchase.

5

When connecting to Solplanet's Ai-HB G2 Series batteries (with only 5 kWh, i.e. two modules), limitations as below apply:

1. The maximum open circuit voltage of PV shall not exceed 750 V;

2. The battery nominal voltage range is reduced to 102.4 V for the particular operation;

3. The maximum charging and discharging current depends on the operating point and is within the range greater than 25 A, less than 30 A.

Three phase hybrid inverters 5 to 12 kW

ASW H-T2-DG

Series

• Max. 50 A charge / discharge

current

• Compatible with diesel generator

• Smart setup, commissioning and

monitoring via Solplanet App

• Intelligent operation modes and

smart battery management for DOD

/ Time of Use / Power setting

• Max. 20 A input current, ideal for

bifacial and large PV modules

• Supporting parallel for on-grid and

off-grid operation

Models:

ASW05kH-T2-DG

ASW06kH-T2-DG

ASW08kH-T2-DG

ASW10kH-T2-DG

ASW12kH-T2-DG

Easy-to-install Safe & reliable User-friendly

• Quick and easy-to-install with

standard tools

• Compact wall mount design

• Simple battery and smart meter

interfaces for quick and secure

installation

• Up to 150 % PV array oversizing for

higher yields

• Asymmetrical power output

• UPS level switching time < 10 ms

• IP66 rated design for indoor and

outdoor use

• DC SPD surge protection

• Arc fault circuit interrupter (AFCI) 1

• ShadeSol shadow management

52

● standard features / ○ optional features / - not available 1

AFCI functionality released in April 2025, please confirm version with Solplanet's sales staff before purchase.

2 When connecting to Solplanet's Ai-HB G2 Series batteries (with only 5 kWh, i.e. two modules), limitations as below apply:

1. The maximum open circuit voltage of PV shall not exceed 750 V;

2. The battery nominal voltage range is reduced to 102.4 V for the particular operation;

3. The maximum charging and discharging current depends on the operating point and is within the range greater than 36 A, less than 50 A.

Technical Datasheet ASW05kH-T2-DG ASW06kH-T2-DG ASW08kH-T2-DG ASW10kH-T2-DG ASW12kH-T2-DG PV input

Max. PV array power 7500 Wp 9000 Wp 12000 Wp 15000 Wp 18000 Wp

Max. input voltage 1100 V 2

MPP voltage range / rated input voltage 150 V - 950 V / 630 V

Min. input voltage / start voltage 60 V / 180 V

No. of independent MPPT trackers / strings per MPPT input 2 / 1

Max. input current / Max. power per MPP tracker 20 A / 7500 W 20 A / 9000 W 20 A / 10000 W

Max. short-circuit current per MPP tracker 30 A

Battery input

Battery voltage range 120 V - 600 V 2

Max. charging power from PV and grid 12000 W

Max. charging power from grid 5000 W 6000 W 8000 W 10000 W 12000 W

Max. discharge power 5000 W 6000 W 8000 W 10000 W 12000 W

Max. charge / discharge current 50 A 2

Battery type LiFePO4

AC input

Rated grid voltage 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V

Rated grid frequency 50 Hz / 60 Hz

Max. input power from grid 10000 W 12000 W 16000 W 20000 W 24000 W

Max. input current from grid 14.5 A 17.4 A 23.2 A 29.0 A 34.8 A

AC output

AC voltage range / Nominal AC voltage 270 V - 480 V / 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V

Rated AC grid frequency 50 Hz / 60 Hz

AC grid frequency range 45 Hz - 55 Hz / 55 Hz - 65 Hz

Rated apparent power 5000 VA 6000 VA 8000 VA 10000 VA 12000 VA

Max. apparent power 5500 VA 6600 VA 8800 VA 11000 VA 13200 VA

Rated grid output current (@400 V) 7.3 A 8.7 A 11.6 A 14.5 A 17.4 A

Max. grid output current (@400 V) 8.0 A 9.6 A 12.8 A 16.0 A 19.2 A

Power factor at rated power / adjustable range 1 / 0.8 leading - 0.8 lagging

Harmonics THDi < 3 % (of nominal power)

EPS output

Nominal output voltage 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V

Nominal output frequency 50 Hz / 60 Hz

Rated apparent power 5000 VA 6000 VA 8000 VA 10000 VA 12000 VA

Rated current (@400 V) 7.3 A 8.7 A 11.6 A 14.5 A 17.4 A

Max. current (@400 V, continuous on-grid / off-grid) 14.5 A / 7.3 A 17.4 A / 8.7 A 23.2 A / 11.6 A 29.0 A / 14.5 A 34.8 A / 17.4 A

Max. power on each phase

(@400 V, continuous on-grid / off-grid) 3333 W / 1667 W 4000 W / 2000 W 5333 W / 2667 W 6667 W / 3333 W 8000 W / 4000 W

Peak output apparent power

(@400 V, continuous on-grid / off-grid up to 10s) 10000 VA / 10000 VA 12000 VA / 12000 VA 16000 VA / 16000 VA 20000 VA / 20000 VA 24000 VA / 24000 VA

Max. switch time < 10 ms

Output THDv (@ Linear load) 2 %

Generator side

Max. input apparent power 7500 VA 9000 VA 12000 VA 15000 VA 18000 VA

Max. charging power of battery 5000 W 6000 W 8000 W 10000 W 12000 W

Rated AC voltage 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V

Rated AC frequency 50 Hz / 60 Hz

Effi- ciencyMPPT efficiency 99.9 %

European efficiency / Max. efficiency 97.2 % / 98.0 % 97.5 % / 98.2 % 97.9 % / 98.4 %

Safety protection

DC surge protection (Type II, according to EN/IEC 61643-11) ●

Insulation resistance detection ●

PV string input reverse polarity protection ●

Battery input reverse polarity protection ●

Ground fault monitoring ●

Residual current monitoring unit ●

AC short circuit protection ●

Anti-islanding protection ●

Arc fault circuit interrupter (AFCI) ○ 1

General data

Dimensions (W / D / H) 625 / 241 / 465 mm

Weight 28.0 kg

Operating temperature range -25 °C ~ 60 °C

Cooling concept Natural convection

Degree of protection (as per IEC 60529) IP66

Relative humidity 100 %

Max. operating altitude 4000 m

Features

HMI LED, App

BMS interface CAN

Smart meter interface RS485

Communication interfaces Dongle: Wi-Fi (2.4 GHz) / LAN (100 Mbps)

Inverter: RS485 (ModBus RTU), LAN (100 Mbps, ModBus TCP only)

Digital output (dry contact) / No. of outputs ● / 2

Digital input (dry contact) / No. of inputs ● / 4

Integrated power control / export power control ● / ●

Certificates (more available upon request)

AS/NZS 4777.2, TOR Stromerzeugungsanlagen Typ A , C10/11, TR 3.3.1, FD C11-519-11, EN 50549-1, EN 61000-6-1, EN 61000-

6-2, EN 61000-6-3, EN 61000-6-4, VDE-AR-N 4105, IEC 60068-2-x, IEC 61683. IEC 61727, IEC 62116, IEC 63027, NTS Type A.

RD 647, UNE 217001, UNE 217002, NA/EEA-NE7, G99-1, PORTARIA Nº 140

Three phase hybrid inverters 8 to 15 kW

ASW H-T3-DG

Series

• 3 independent MPPTs for flexible

and higher kWp PV array design

• Max. 50A charge / discharge

current

• Compatible with diesel generator

• Smart setup, commissioning and

monitoring via Solplanet App

• Intelligent operation modes and

smart battery management for DOD

/ Time of Use / Power setting

• Max. 16 A input current, ideal for

bifacial and large PV modules

• Supporting parallel for on-grid and

off-grid operation

Models:

ASW08kH-T3-DG

ASW10kH-T3-DG

ASW12kH-T3-DG

ASW15kH-T3-DG

Easy-to-install Safe & reliable User-friendly

• Quick and easy-to-install with

standard tools

• Compact wall mount design

• Simple battery and smart meter

interfaces for quick and secure

installation

• Up to 150 % PV array oversizing for

higher yields

• Asymmetrical power output2

• UPS level switching time < 10 ms

• IP66 rated design for indoor and

outdoor use

• DC SPD surge protection

• Arc fault circuit interrupter (AFCI)

• ShadeSol shadow management

54

Technical Datasheet ASW08kH-T3-DG ASW10kH-T3-DG ASW12kH-T3-DG ASW15kH-T3-DG PV input

Max. PV array power 12000 Wp 15000 Wp 18000 Wp 22500 Wp

Max. input voltage 1100 V 1

MPP voltage range / rated input voltage 150 V - 950 V / 630 V

Min. input voltage / start voltage 60 V / 180 V

No. of independent MPPT trackers / strings per MPPT input 3 / 1

Max. input current / Max. power per MPP tracker 16 A / 10000 W

Max. short-circuit current per MPP tracker 24 A

Battery input

Battery voltage range 120 V - 600 V 1

Max. charging power from PV and grid 12000 W 15000 W

Max. charging power from grid 8000 W 10000 W 12000 W 15000 W

Max. discharge power 8000 W 10000 W 12000 W 15000 W

Max. charge / discharge current 50 A 1

Battery type LiFePO4

AC input

Rated grid voltage 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V

Rated grid frequency 50 Hz / 60 Hz

Max. input power from grid 16000 W 20000 W 24000 W 24000 W

Max. input current from grid 23.2 A 29.0 A 34.8 A 34.8 A

AC output

AC voltage range / Nominal AC voltage 270V - 480V, 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V

Rated AC grid frequency 50 Hz / 60 Hz

AC grid frequency range 45 Hz - 55 Hz / 55 Hz - 65 Hz

Rated apparent power 8000 VA 10000 VA 12000 VA 15000 VA

Max. apparent power 8000 VA 10000 VA 12000 VA 15000 VA

Rated grid output current (@400 V) 11.6 A 14.5 A 17.4 A 21.7 A

Max. grid output current(@400 V) 12.8 A 16.0 A 19.2 A 23.9 A

Power factor at rated power / adjustable displacement 1 / 0.8 leading - 0.8 lagging

Harmonics THDi < 3 % (of nominal power)

EPS output

Nominal output voltage 3/N/PE, 220 V / 380 V; 230 V / 400 V; 240 V / 415 V

Nominal output frequency 50 Hz / 60 Hz

Rated apparent power 8000 VA 10000 VA 12000 VA 23.9 A

Rated current (@400 V) 11.6 A 14.5 A 17.4 A 21.7 A

Max. current (@400 V, continuous on-grid / off-grid) 23.2 A / 11.6 A 29.0 A / 14.5 A 34.8 A / 17.4 A 34.8 A 21.7 A

Max. power on each phase(@400 V, continuous on-grid / off-grid) 5333 W / 2667 W 6667 W / 3333 W 8000 W / 4000 W 8000 W 5000 W

Peak output apparent power(@400 V, continuous on-grid / off-grid

up to 10s) 16000 VA / 16000 VA 20000 VA / 20000 VA 24000 VA / 24000 VA 24000 VA 24000 VA

Max. switch time < 10 ms

Output THDv (@ Linear load) 2 %

Generator side

Max. input apparent power 12000 VA 15000 VA 18000 VA 18000 VA

Max. charging power of battery 8000 W 10000 W 12000 W 15000 W

Rated AC voltage 3/N/PE, 220 / 380 V; 230 V / 400 V; 240 V / 415 V

Rated AC frequency 50 Hz / 60 Hz

Effi- ciency

MPPT efficiency 99.9 %

European efficiency / Max. efficiency 97.2 % / 98.0 % 97.9 % / 98.4 %

Safety protection

DC surge protection ( Type II, according to EN/IEC 61643-11) ●

Insulation resistance detection ●

PV string input reverse polarity protection ●

Battery input reverse polarity protection ●

Ground fault monitoring ●

Residual current monitoring unit ●

AC short circuit protection ●

Anti-islanding protection ●

Arc fault circuit interrupter (AFCI) ○ ●

General data

Dimensions (W / D / H) 625 / 241 / 465 mm 625 / 245 / 465 mm

Weight 29.5 kg 30.0 kg

Operating temperature range -25 °C ~ 60 °C

Cooling concept Natural convection Smart cooling

Degree of protection (as per IEC 60529) IP66

Relative humidity 100 %

Max. operating altitude 4000 m

Features

HMI LED, App

BMS interface CAN

Smart meter interface RS485

Communication interfaces Dongle: Wi-Fi (2.4 GHz) / LAN (100 Mbps)

Inverter: RS485 (ModBus RTU), LAN (100 Mbps, ModBus TCP only)

Digital output (dry contact) / No. of outputs ● / 2

Digital input (dry contact) / No. of inputs ● / 4

Integrated power control / export power control ● / ●

Certificates (more available upon request) 3

AS/NZS 4777.2, TOR Stromerzeugungsanlagen Typ A，C10/11, TR 3.3.1, FD C11-519-11, EN

50549-1, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, VDE-AR-N 4105, IEC

60068-2-x, IEC 61683. IEC 61727, IEC 62116, IEC 63027, NTS Type A. RD 647, UNE 217001,

UNE 217002, NA/EEA-NE7, G99-1, PORTARIA Nº 140

IEC 61683, IEC 61727,

IEC 62116, IEC 63027, EN

50549, Ord 208, PL NC RfG,

PTPiREE

● standard features / ○ optional features / - not available

1 When connecting to Solplanet's Ai-HB G2 Series batteries (with only 5 kWh, i.e. two modules), limitations as below apply:

1. The maximum open circuit voltage of PV shall not exceed 750 V;

2. The battery nominal voltage range is reduced to 102.4 V for the particular operation;

3. The maximum charging and discharging current depends on the operating point and is within the range greater than 36 A, less than 50 A.

2

Please consult local sales regarding supporting symmetric or asymmetric parallel.

3 Please consult local sales regarding the certification availability.

Models:

ASW015K-TH

ASW020K-TH

ASW025K-TH

ASW29.9K-TH

ASW030K-TH

Three phase hybrid inverters 15 to 30 kW

ASW TH Series

• String-level current monitoring

• DC SPD Type II surge protection

• IP66 rated design for indoor and

outdoor use

• Optimal battery voltage range,

120-800 V

• Intelligent operation modes and

smart battery management

• UPS-level switching time < 10 ms

• Asymmetical power output

• Compatible with diesel generators 2

• Quick and easy-to-install with

standard tools

• Smart setup, commissioning and

monitoring via Solplanet App

• Anti-theft design

Optimal performance Safe & reliable User-friendly

• 4 MPPTs, up to 40 A input per

MPPT

• Up to 200 % PV array oversizing

• Up to 100 A charge / discharge

current

• ShadeSol shadow management

• Dynamic export power control

• Integrated parallel function in ongrid mode with symmetric power

output1

56

● standard features / ○ optional features / - not available

1

Parallel function requires integration with Solplanet's Ai-Hub energy management system when operating in on-grid mode. This

function is supported in models produced from August 2025 onward and with software version R008 or higher.

2

Integration with diesel generator is supported in models produced from November 2025 onward.

Technical Datasheet ASW015K-TH ASW020K-TH ASW025K-TH ASW29.9K-TH ASW030K-TH PV input

Max. PV array power 30000 Wp 40000 Wp 50000 Wp 59800 Wp 60000 Wp

Max. input voltage 1000 V

MPP voltage range / rated input voltage 150 V - 950 V / 630 V

Min. input voltage / start voltage 95 V / 180 V

No. of independent MPPT trackers / strings per MPPT input 4 / 1 4 / 2

Max. input current / Max. power per MPP tracker 20 A / 15000 W 20 A / 15000W 40 A / 25000 W 40 A / 25000 W 40 A / 25000 W

Max. short-circuit current per MPP tracker 25 A 50 A

Battery input

Battery voltage range 120 V - 800 V

Max. charge power from PV and AC side 30000 W 40000 W 50000 W 59800 W 60000 W

Max. charge power from AC side 15000 W 20000 W 25000 W 29900 W 30000 W

Max. discharge power 15000 W 20000 W 25000 W 29900 W 30000 W

Max. charge current / Max. discharge current 50 A 100 A

No. of independent battery inputs 1 2

Battery type LiFePO4

AC input

Nominal AC voltage

3/N/PE, 220 V / 380 V

3/N/PE, 230 V / 400 V

3/N/PE, 240 V / 415 V

Rated grid frequency 50 Hz / 60 Hz

Max. input power from grid 30000 W 40000 W 50000 W 50000 W 50000 W

Max. input current from grid 43.5 A 58.0 A 72.5 A 72.5 A 72.5 A

AC output

Nominal AC voltage

3/N/PE, 220 V / 380 V

3/N/PE, 230 V / 400 V

3/N/PE, 240 V / 415 V

AC voltage range 270 V - 480 V

Rated AC grid frequency 50 Hz / 60 Hz

AC grid frequency range 45 Hz - 55 Hz / 55 Hz - 65 Hz

Rated apparent power 15000 VA 20000 VA 25000 VA 29900 VA 30000 VA

Max. apparent power 15000 VA 20000 VA 25000 VA 29900 VA 30000 VA

Rated grid output current(@400V) 21.7 A 29.0 A 36.2 A 43.3 A 43.4 A

Max. grid output current 23.9 A 31.9 A 39.8 A 47.6 A 47.8 A

Power factor at rated power / adjustable range 1 / 0.8 leading - 0.8 lagging

Harmonics THDi < 3 % (of nominal power)

EPS output

Nominal AC voltage

3/N/PE, 220 V / 380 V

3/N/PE, 230 V / 400 V

3/N/PE, 240 V / 415 V

Nominal output frequency 50 Hz / 60 Hz

Rated apparent power 15000 VA 20000 VA 25000 VA 29900 VA 30000 VA

Max. apparent power (@400 V, continuous on-grid/off-grid) 16500 VA 22000 VA 27500 VA 32890 VA 33000 VA

Rated current (@400V) 21.7 A 29.0 A 36.2 A 43.3 A 43.4 A

Max. current (@400 V, continuous on-grid / off-grid) 23.9 A 31.9 A 39.8 A 47.6 A 47.8 A

Max. power on each phase (@400 V, continuous on-grid / off-grid) 5500 W 7333 W 9166 W 10963 W 11000 W

Peak output apparent power (off-grid up to 10s) 30000 VA 40000 VA 45000 VA 45000 VA 45000 VA

Max. switch time < 10 ms

Output THDv (@ Linear load) 2 %

Effi- ciency

MPPT efficiency 99.9 %

European efficiency / Max. efficiency 97.2 % / 98.0 % 97.9 % / 98.4 %

Safety protection

DC / AC surge protection (Type II, according to EN/IEC 61643-11） ● / ○

Insulation resistance detection ●

PV string input reverse polarity protection ●

Battery input reverse polarity protection ●

Ground fault monitoring ●

Residual current monitoring unit ●

AC short circuit protection ●

Anti-islanding protection ●

General data

Supported grid types TN-S, TN-C, TN-C-S, TT

Dimensions (W / D / H) 769 / 285 / 491 mm

Weight 52.0 kg 58.0 kg

Operating temperature range -30 °C ~ 60 °C

Cooling concept Smart cooling

Degree of protection (as per IEC 60529) IP66

Relative humidity 100 %

Max. operating altitude 4000 m

Features

HMI LED, App

BMS interface CAN

Communication Interfaces Dongle: Wi-Fi (2.4 GHz) / LAN (100 Mbps)

Inverter: RS485 (ModBus RTU), LAN (100 Mbps, ModBus TCP only)

Digital output (dry contact) / No. of outputs ● / 3

Digital input (dry contact) / No. of inputs ● / 7

Integrated power control / export power control ● / ●

Single phase All-in-one hybrid energy storage system 600 to 1000 W

ASW A-S Series

ASW0600/2500A-S

ASW0800/2500A-S

ASW1000/2500A-S

Models:

ASW0600/1250A-S

ASW0800/1250A-S

ASW1000/1250A-S

Safe & reliable Easy-to-install Efficient & intelligent

• Isolated topology, safe

and reliable low voltage

system

• 10 years warranty

• All-around protection

with Battery Management System (BMS)

• Quick plug design, easier

installation process

• Compact exterior design,

fits in your home decorated nicely

• All-in-one system, easy

to install for everyone

• Over 200 % PV array

oversizing for higher

yields

• 2 MPPTs with 4 strings,

increase PV generation.

• 6 work modes, 2 battery

capacity choices

User-friendly

• Low working temperature down to -15°C

• LCD display screen,

intuitive setup and status

monitoring

• Smart setup, commissioning and monitoring

via Solplanet App

58

ASW0600/2500A-S

ASW0800/2500A-S

ASW1000/2500A-S

Technical Datasheet

ASW0600/

1250A-S

ASW0800/

1250A-S

ASW1000/

1250A-S

ASW0600/

2500A-S

ASW0800/

2500A-S

ASW1000/

2500A-S

PV input

Max. PV array power 2000 Wp

Max. input voltage 50 V

MPP voltage range / rated input voltage 16 V - 50 V / 40 V

Min. input voltage / start voltage 26 V / 30 V

No. of independent MPPT trackers / strings per

MPPT input 2 / 2

Max. input current per MPP tracker 28 A

Max. short-circuit current per MPP tracker 39 A

Battery input

Rated battery energy 1.3 kWh 2.4 kWh

Rated capacity 27 Ah 50 Ah

Battery type LiFePO4

AC output（On-grid）

Nominal AC voltage 220 V / 230 V / 240 V

AC voltage range 154 V - 276 V

Rated AC grid frequency 50 Hz / 60 Hz

AC grid frequency range 45 Hz - 55 Hz / 55 Hz - 65 Hz

Rated apparent power 600 VA 800 VA 1000 VA 600 VA 800 VA 1000 VA

Max. apparent power 600 VA 800 VA 1000 VA 600 VA 800 VA 1000 VA

Rated grid output current (@230 V) 2.6 A 3.5 A 4.4 A 2.6 A 3.5 A 4.4 A

Max. grid output current 2.8 A 3.8 A 4.8 A 2.8 A 3.8 A 4.8 A

Harmonics THDi < 3 % (of nominal power)

AC input

Rated grid voltage 220 V / 230 V / 240 V

Rated grid frequency 50 Hz / 60 Hz

Max. input power from grid 1000 W

Max. input current from grid 4.8 A

AC output(Off-grid)

Nominal output voltage 230 V

Nominal output frequency 50 Hz / 60 Hz

Rated apparent power 1000 VA

Peak output apparent power 1600 VA, 60 s

Rated output current (@230 V) 4.4 A

Max. output current 4.8 A

Output THDv (@ Linear load) < 2 %

EPS model Manual switch

Effici- ency

MPPT efficiency 99.9 %

Max. battery to load efficiency 92.0 %

General data

Power factor at rated power / adjustable range 1 / 0.8 leading - 0.8 lagging

Topology Isolated

Dimensions (W / D / H) 600 / 310 / 400 mm

Weight 31.0 kg 38.0 kg

Operating temperature range -15 °C ~ 45 °C

Cooling concept Fan Cooling

Degree of protection (as per IEC 60529) IP55

Relative humidity 95.0 %

Max. operating altitude 3000 m

Features

HMI LCD, App

Zero-export interface CT

Internet communication interfaces Wi-Fi

Certificates

Grid VDE 4105, EN 50549

Safety IEC/EN 62109-1, IEC/EN 62109-2

EMC IEC/EN 61000-6-1/-2/-3/-4, IEC/EN 61000-3-2/-3

Battery IEC62619, UN 38.3

Energy

Storage

Batteries

60

Store each energy

HIGH VOLTAGE BATTERY

AP-H SERIES

APH5.0-S2 / S3 / S4 / S5 / S6 / S7 / S8

/ S9 / S10

Ai-HB G2-E SERIES

Ai-HB-E 050A / 100A / 150A / 200A

Ai-HB G2 Pro SERIES

Ai-HB Pro 050A / 075A / 100A / 125A /

150A / 175A / 200A

Ai-HB G2 SERIES

Ai-HB 050A /075A / 100A / 125A /

150A / 175A / 200A

LOW VOLTAGE BATTERY

Ai-LB-G3 SERIES

ASW5120-LB-G3

Ai-LB-E SERIES

ASW5120-LB-E

High Voltage Battery 10 to 51 kWh

Models:

APH5.0-S2

APH5.0-S3

APH5.0-S4

APH5.0-S5

APH5.0-S6

APH5.0-S7

APH5.0-S8

APH5.0-S9

APH5.0-S10

AP-H Series

• Stackable up to 51.2 kWh per

tower, max. 4 towers in parallel

(204.8 kWh)

• Plug-and-play design for simplified installation

• Built-in emergency fire suppression module

• IP65 rated design for indoor and

outdoor use

• Built with durable LFP technology

and an intelligent battery management system

• 51 kWh tower at just 1.8 meters in

height

• Lightweight modules for easier

handling and installation

• Compact design fits for narrow

spaces like garages and walkways

• 5 selections for operating (LED)

indicator via Solplanet's App

Safe Reliable User-friendly

62

Technical Datasheet APH5.0-S2 APH5.0-S3 APH5.0-S4 APH5.0-S5 APH5.0-S6 APH5.0-S7 APH5.0-S8 APH5.0-S9 APH5.0-S10 System Data

battery designation

Battery module APH 5.0

Module quantity 25 3 4 5 6 7 8 9 10

Cell type LiFePO4

Rated capacity 100 Ah

Nominal energy1 10.24 kWh 15.36 kWh 20.48 kWh 25.6 kWh 30.72 kWh 35.84 kWh 40.96 kWh 46.08 kWh 51.2 kWh

Usable energy2 9.72 kWh 14.59 kWh 19.45 kWh 24.32 kWh 29.18 kWh 34.04 kWh 38.91 kWh 43.77 kWh 48.64 kWh

Nominal voltage 102.4 V 153.6 V 204.8 V 256.0 V 307.2 V 358.4 V 409.6 V 460.8 V 512.0 V

Battery voltage range 80 V - 118.4 V 120 V - 177.6 V 160 V - 236.8 V 200 V - 296 V 240 V - 355.2 V 280 V - 414.4 V 320 V - 473.6 V 360 V - 532.8 V 400 V - 592 V

Recommended charge / discharge current 50 A / 50 A

Max. charge / discharge current 50 A / 50 A

Rated DC power 5.12 kW 7.68 kW 10.24 kW 12.8 kW 15.36 kW 17.92 kW 20.48 kW 23.04 kW 25.6 kW

Rated charge / discharge power 5.12 kW 7.68 kW 10.24 kW 12.8 kW 15.36 kW 17.92 kW 20.48 kW 23.04 kW 25.6 kW

Max. charge / discharge power 5.12 kW 7.68 kW 10.24 kW 12.8 kW 15.36 kW 17.92 kW 20.48 kW 23.04 kW 25.6 kW

System Data

Dimensions（W / D / H） 1040 / 250 /

600 mm

1040 / 250 /

750 mm

1040 / 250 /

900 mm

1040 / 250 /

1050 mm

1040 / 250 /

1200 mm

1040 / 250 /

1350 mm

1040 / 250 /

1500 mm

1040 / 250 /

1650 mm

1040 / 250 /

1800 mm

Weight 111.0 kg 157.0 kg 203.0 kg 249.0 kg 295.0 kg 341.0 kg 387.0 kg 433.0 kg 479.0 kg

Installation location Indoor / utdoor

Mounting method Floor mounted

Operating temperature range Charge： 0 ℃ ~ 58 ℃

Discharge： -20 ℃ ~ 58 ℃

Storage temperature range -20 °C ~ 60 °C

Cooling concept Natural convection

Protective class I

Degree of protection IP65

Relative humidity 5 % - 95 % (Non - condensing)

Max. operating altitude 4000 m (>3000 m derating)

Communication CAN

Certificate IEC 62619, IEC 62040, IEC 63056, IEC 61000

Cycle life³ 6000 times

Round-trip efficiency ≥ 95 %

1. Nominal energy is defined under the following conditions: 0.5 C charge & discharge at 25 ℃.

2. Usable energy is defined under the following conditions: 95 %DOD, 0.2 C charge & discharge at 25 ℃. 3. Cycle life is defined under the following conditions: 90 %DOD, 0.5 C charge & discharge at 25 ℃ (One cycle a day), 70 %EOL.

High Voltage Battery 5 to 20 kWh

Models:

Ai-HB-E 050A

Ai-HB-E 100A

Ai-HB-E 150A

Ai-HB-E 200A

Ai-HB G2-E Series

• LFP technology with cell-level

monitoring for precise alerts and

maximum safety

• Built-in emergency fire suppression module for rapid response

in critical situations

• Advanced BMS protects against

overcharge, over-discharge, and

short circuits

• Robust anti-dumping design

delivers secure installation and

shock resistance

• Modular Plug-and-Play design supports flexible expansion

(up to 8 units in parallel)

• Versatile applications for self-consumption, time-of-use tariffs, and

customizable modes

• Stackable and expandable up to

163.84 kWh

• IP20 rating ensures safe and reliable operation in diverse indoor

environments

• Real-time monitoring via Solplanet's App enables effortless

control anytime, anywhere

Safe Reliable User-friendly

64

Technical Datasheet Ai-HB-E 050A Ai-HB-E 100A Ai-HB-E 150A Ai-HB-E 200A System Data

Battery designation

Battery module-Master ASW5120M-HB-E

Battery module-Slave ASW5120S-HB-E

Cell type LiFePO4

Module quantity 1 Master 1 Master + 1 Slave 1 Master + 2 Slaves 1 Master + 3 Slaves

Rated capacity 50 Ah

Nominal energy1 5.12 kWh 10.24 kWh 15.36 kWh 20.48 kWh

Usable energy2 4.60 kWh 9.21 kWh 13.82 kWh 18.43 kWh

Nominal voltage 102.4 V 204.8 V 307.2 V 409.6 V

Operating voltage range 96 V - 115.2 V 192 V - 230.4 V 288 V - 345.6 V 384 V - 460.8 V

Max. charge current 50 A

Max. discharge current 50 A

Rated charge /discharge power 5.12 kW 10.24 kW 15.36 kW 20.48 kW

Max.charge power 5.12 kW 10.24 kW 15.36 kW 20.48 kW

Max.discharge power 5.12 kW 10.24 kW 15.36 kW 20.48 kW

General Data

Dimensions including the base (W / D / H) 525 / 350 / 415 mm 525 / 350 / 700 mm 525 / 350 / 985 mm 525 / 350 / 1270 mm

Weight 60.5 kg 116.0 kg 171.5 kg 227.0 kg

Installation location Indoor

Mounting method Floor mounted

Operating temperature range Charge: 0 °C ~ 50 °C

Discharge: -20 °C ~ 50 °C

Storage temperature range -20 °C ~ 45 °C

Cooling concept Natural convection

Degree of protection IP20

Relative humidity 5 % - 95 %（Non-condensing）

Communication CAN

Certificate IEC 62619, EN 61000, UN38.3, IEC 62477

Protection

Charging over-voltage protection, discharge under-voltage

protection, over-current protection, over-temperature

protection ,short-circuit protection, fire suppression, etc

Cycle life3 6000 times

Round-trip efficiency ≥ 95 %

1. Nominal energy is defined under the following conditions: cell voltage 2.5 V - 3.65V, 0.5C charge & discharge at 25 °C.

2. Usable energy is defined under the following conditions: 90 % DOD, 0.5C charge & discharge at 25 °C. Usable energy may vary depending on discharge,

charge, environmental conditions and SOC % limits defined by the user.

3. Cycle life is defined under the following conditions: 90 % DOD, 70 % EOL, 0.5C charge & discharge at 25 °C.

* Parallel expansion is only supported within same series models.

High Voltage Battery 5 to 20 kWh

Models:

Ai-HB Pro 050A

Ai-HB Pro 075A

Ai-HB Pro 100A

Ai-HB Pro 125A

• Up to 1C charge / discharge rate

• Stackable and expandable up to

163.84 kWh (supporting 8 modules

per unit, 8 units in parallel)

• IP65 rated design for indoor and

outdoor use

• Multi-use applications: selfconsumption, time of use tariffs,

customisation

• VDE-compliant with enhanced

protection

• Smarter and safer battery

management system for precise

diagnostics

• LFP safe technology with long

lifespan

• Built-in fire suppression

functionality

• Steady and anti-dumping design

• Quick & easy-to-install with

standard tools

• Modular design with plug-in

connections

• Quick connections between battery

and inverter

Ai-HB Pro 150A

Ai-HB Pro 175A

Ai-HB Pro 200A

Ai-HB G2 Pro

Series

Optimal performance Safe & reliable User-friendly

66

Technical Datasheet Ai-HB Pro 050A Ai-HB Pro 075A Ai-HB Pro 100A Ai-HB Pro 125A Ai-HB Pro 150A Ai-HB Pro 175A Ai-HB Pro 200A System Data

Battery designation

Battery module HB051050B

Cell type LiFePO4

Module quantity 2 3 4 5 6 7 8

Rated capacity 50 Ah

Nominal energy1 5.12 kWh 7.68 kWh 10.24 kWh 12.8 kWh 15.36 kWh 17.92 kWh 20.48 kWh

Usable energy2 4.60 kWh 7.29 kWh 9.72 kWh 12.16 kWh 14.59 kWh 17.02 kWh 19.45 kWh

Nominal voltage 102.4 V 153.6 V 204.8 V 256.0 V 307.2 V 358.4 V 409.6 V

Battery voltage range 80 V - 106.8 V 120 V - 175.2 V 160 V - 233.6 V 200 V - 292 V 240 V - 350.4 V 280 V - 408.8 V 320 V - 467.2 V

Recommended charge /

discharge current 50 A / 50 A

Max. charge / discharge

current 50 A / 50 A

Rated charge /

discharge power 5.12 kW 7.68 kW 10.24 kW 12.8 kW 15.36 kW 17.92 kW 20.48 kW

Max.charging power 5.12 kW 7.68 kW 10.24 kW 12.8 kW 15.36 kW 17.92 kW 20.48 kW

Max.discharging power 5.12 kW 7.68 kW 10.24 kW 12.8 kW 15.36 kW 17.92 kW 20.48 kW

General Data

Dimensions (W / D / H) 540 / 390 / 470

mm

540 / 390 / 600

mm

540 / 390 / 730

mm

540 / 390 / 860

mm

540 / 390 / 990

mm

540 / 390 / 1120

mm

540 / 390 / 1250

mm

Weight 78.0 kg 109.0 kg 140.0 kg 171.0 kg 202.0 kg 233.0 kg 264.0 kg

Battery module weight 31.0 kg

Depth of discharge 95.0 %

Installation location Indoor / Outdoor

Mounting method Floor mounted

Operating temperature

range

Charge: 2 °C ~ 58°C

Discharge: -28 °C ~ 58 °C

Storage temperature range -20 °C ~ 45 °C

Cooling concept Natural convection

Degree of protection IP65

Relative humidity 5 % - 95 %（Non - condensing）

Max. operating altitude 3000 m (> 2000 m derating)

Communication CAN

Protection

Charging over-voltage protection, discharging under-voltage

protection, over-current protection, over-temperature

protection, short-circuit protection, built-in fire suppression, etc

Certificate IEC62619 / EN61000 / VDE2510-50

IEC62040 / UN38.3

Cycle life3 8000 times

Round-trip efficiency ≥ 95 %

1. Nominal energy is defined under the following conditions: cell voltage 2.5 V - 3.65 V, 0.5C charge / discharge at 25°C.

2. Usable energy is defined under the following conditions: 95% DOD, 0.5C charge / discharge at 25°C. Usable energy may vary depending on discharge,

charge, environmental conditions and SOC % limits defined by the user.

3. Cycle life is defined under the following conditions: 90% DOD, 70% EOL, 0.2C charge / discharge at 25°C.

* Parallel expansion is only supported within same series models.

High Voltage Battery 5 to 20 kWh

Models:

Ai-HB 050A

Ai-HB 075A

Ai-HB 100A

Ai-HB 125A

• Modular design with plug-in

connections

• Quick connections between battery

and inverter

• Quick and easy-to-install with

standard tools

• Steady and anti-dumping design

• IP65 rated design for indoor and

outdoor use

• Cell-level monitoring

• LFP safe technology

• Stackable and expandable up to

163.84 kWh (supporting 8 modules

per unit, 8 units in parallel)

• Multi-use applications: selfconsumption, time of use tariffs,

customisation

• Smart setup, commissioning and

monitoring via Solplanet App

Ai-HB 150A

Ai-HB 175A

Ai-HB 200A

Ai-HB G2 Series

Easy-to-install Safe & reliable User-friendly

68

Technical Datasheet Ai-HB 050A Ai-HB 075A Ai-HB 100A Ai-HB 125A Ai-HB 150A Ai-HB 175A Ai-HB 200A System Data

Battery designation

Battery module HB051050A

Cell type LiFePO4

Module quantity 25 3 4 5 6 7 8

Rated capacity 50 Ah

Nominal energy1 5.12 kWh 7.68 kWh 10.24 kWh 12.8 kWh 15.36 kWh 17.92 kWh 20.48 kWh

Usable energy2 4.60 kWh 6.91 kWh 9.21 kWh 11.52 kWh 13.82 kWh 16.12 kWh 18.43 kWh

Nominal voltage 102.4 V 153.6 V 204.8 V 256 V 307.2 V 358.4 V 409.6 V

Battery voltage

range

80 V - 116.8 V 120 V - 175.2 V 160 V - 233.6 V 200 V - 292 V 240 V - 350.4 V 280 V - 408.8 V 320 V - 467.2 V

Recommended

charge / discharge

current

25 A / 30 A

Max. charge / discharge current 25 A / 30 A

Rated charge /

discharge power 2.56 kW 3.84 kW 5.12 kW 6.40 kW 7.68 kW 8.86 kW 10.24 kW

Max.charging

power

2.56 kW 3.84 kW 5.12 kW 6.40 kW 7.68 kW 8.86 kW 10.24 kW

Max.discharge

power

3.08 kW 4.61 kW 6.14 kW 7.68 kW 9.22 kW 10.75 kW 12.29 kW

General Data

Dimensions (W /

D / H) 540 / 390 / 470 mm 540 / 390 / 600 mm 540 / 390 / 730 mm 540 / 390 / 860 mm 540 / 390 / 990 mm 540 / 390 / 1120 mm 540 / 390 / 1250 mm

Weight 76.0 kg 106.5 kg 137.0 kg 167.5 kg 198.0 kg 228.5 kg 259.0 kg

Battery module

weight 30.5 kg

Installation location Indoor / Outdoor

Mounting method Floor mounted

Operating temperature range

Charge: 0 °C ~ 50 °C

Discharge: -20 °C ~ 55 °C

Storage temperature range

-20 °C ~ 45 °C

Cooling concept Natural convection

Degree of protection IP65

Relative humidity 5 % - 95 %（Non - condensing）

Max. operating

altitude 3000 m (> 2000 m derating)

Communication CAN

Certificate IEC 62619, EN 61000, IEC 62040, UN38.3

Cycle life3 6000 times

Protection

Charging over-voltage protection, discharging under-voltage

protection, over-current protection, over-temperature

protection, short-circuit protection, built-in fire suppression4, etc

Round-trip efficiency ≥ 95 %

1. Nominal energy is defined under the following conditions: cell voltage 2.5 V - 3.65 V，0.5C charge & discharge at 25°C.

2. Usable energy is defined under the following conditions: 0.5C charge & discharge at 25°C， 90% DOD. Usable energy may vary depending on discharge,

charge, environmental conditions and SOC % limits defined by the user.

3. Cycle life is defined under the following conditions: 0.5C charge & discharge at 25°C，90% DOD, 70% EOL

4. Available with or without built-in fire suppression functionality, this feature was released in August 2024, please confirm version with Solplanet sales before purchase.

5. When using only 2 modules (5.12 kWh), please ensure that the maximum operating voltage of the inverter's photovoltaic system is not higher than 750 V.

* Battery towers of different series or models cannot be used in parallel.

Model:

ASW5120-LB-G3

Ai-LB-G3 Series

Low Voltage Battery 5 to 25 kWh

Optimal performance Safe & reliable User-friendly

• Low self and standby consumption

• Enhanced SOC measurement

accuracy for optimal battery

management

• Supports up to 1C charge /

discharge rate

• IP66 rated design for indoor and

outdoor use

• Designed in accordance with global

safety standards

• Integrated fire suppression system

• Smarter and safer battery

management system for precise

diagnostics

• Integrated MOSFET and dual fuse

protection for superior safety and

reliability

• Stackable up to 5 modules,

25.6 kWh per tower

• Elegant design with concealed

cable management

• Compact, lightweight modules for

easier handling and installation

• 5 selections for operating (LED)

indicator via Solplanet App

70

1. Nominal energy is defined under the following conditions: battery voltage 40 V - 58.4 V, 0.5C charge & discharge at 25 °C.

2. Usable energy is defined under the following conditions: 0.5C charge & discharge at 25°C, 95% DOD.

3. Cycle life is defined under the following conditions: 0.5C charge & discharge at 25°C (One cycle a day), 90% DOD, 70% EOL.

Technical Datasheet System Data

Battery module ASW5120-LB-G3

Module number

1 2 3 4 5

Cell type LiFePO4

Rated capacity 100 Ah

Nominal energy1 5.12 kWh 10.24 kWh 15.36 kWh 20.48 kWh 25.6 kWh

Usable energy2 4.86 kWh 9.72 kWh 14.59 kWh 19.45 kWh 24.32 kWh

Nominal battery voltage 51.2 V

Battery voltage range 40 V - 58.4 V

Recommended charge / discharge current 60 A 120 A 120 A 120 A 120 A

Max. charge / discharge current 100 A 120 A 120 A 120 A 120 A

Rated charge / discharge power 3.07 kW 6.14 kW 6.14 kW 6.14 kW 6.14 kW

Max. charge / discharge power 5.12 kW 6.14 kW 6.14 kW 6.14 kW 6.14 kW

General Data

Dimensions (W / D / H) 630 / 185 / 320 mm 630 / 185 / 640 mm 630 / 185 / 960 mm 630 / 185 / 1280 mm 630 / 185 / 1600 mm

Module weight 46.0 kg 92.0 kg 138.0 kg 184.0 kg 230.0 kg

Base weight 2.6 kg

Installation location Indoor / Outdoor

Mounting method Floor mounted / Wall mounted

Operating temperature range Charging: -8 °C ~ 58 °C

Discharging: -18 °C ~ 58 °C

Storage temperature range -20 °C ~ 60 °C

Cooling concept Natural convection

Protective class II

Degree of protection IP66

Relative humidity 5 % - 95 %（Non-condensing）

Max. operating altitude 4000 m (> 3000 m derating)

Communication CAN

Certificate IEC 62619, IEC 62040, IEC 62477, IEC 63056, IEC 61000

Cycle life3 6000 times

Round-trip efficiency ≥ 95 %

Model:

ASW5120-LB-E

Ai-LB-E Series

Low Voltage Battery 5.12kWh

Optimal performance Safe & reliable User-friendly

• LFP safe technology, long cyclelife,

high efficiency and high power

density

• Supports up to 1C charge /

discharge rate with short-term 2 C

overload capability

• Cell level monitoring and balancing

• Smarter and safer battery

management system for precise

diagnostics

• Provides complete protection to

keep battery healthy and safe

• Built-in fire suppression

functionality 4

• Stackable and expandable up to

163.84 kWh (supporting 8 modules

per unit, 4 units in parallel)

• Streamlined design for easier

handling

• Various mounting methods: wallmounted, floor-standing, and

racked

72

Technical Datasheet System Data

Battery module ASW5120-LB-E

Cell type LiFePO4

Rated capacity 100 Ah (≥ 100 Ah)

Nominal energy1 5.12 kWh

Usable energy2 4.6 kWh

Nominal voltage 51.2 V

Battery voltage range 43.2 V - 57.6 V

Recommended charge / discharge current 60 A

Peak discharge current 200 A @ 3 s

Max. charge / discharge current 100 A / 100 A

Max. charge / discharge power 5.12 kW

Peak discharge power 10.24 kW @ 3 s

General Data

Dimensions (W / D / H) 390 / 500 / 155 mm

Weight 43.0 kg

Installation location Indoor

Mounting method Floor mounted / Wall mounted / Rack mounted

Operating temperature range Charge: 2 °C ~ 58 °C

Discharge: -18 °C ~ 58 °C

Storage temperature range -20 °C ~ 45 °C

Cooling concept Natural convection

Protective class II

Degree of protection IP20

Relative humidity 5 % - 95 %（Non-condensing）

Max. operating altitude 3000 m (> 2000 m derating)

Scalability Max. 32 sets in parallel

Communication CAN

Certificate IEC62619, IEC61000, UN38.3

Cycle life3 6000 times

Round-trip efficiency ≥ 95 %

1. Nominal energy is defined under the following conditions: battery voltage 43.2 V - 57.6 V, 0.2C charge / discharge at 25°C.

2. Usable energy is defined under the following conditions: 90% DOD, 0.2C charge / discharge at 25°C.

3. Cycle life is defined under the following conditions: 90% DOD, 70% EOL, 0.5C charge / discharge at 25°C (One cycle a day).

4. This specification is only applicable in European region.

C&I Energy

Storage

System

74

C&I Energy

Storage

System

C&I ESS

ASW 125K/261-PT

Power every

business moment

Model:

ASW 125K/261-PT

ASW PT Series

All-in-one ESS Cabinet

• Multi-level electrical protection and

fire protection

• PACK-level alarms and protection

to effectively prevent fault propagation

• Zone-isolated enclosure and advanced liquid cooling

• Modular design, PCS and battery

module replaced quickly

• High-cycling cells design reduces

lifecycle maintenance

• Integrated local EMS for real-time

data and system monitoring

All in one Design High safety Smart O&M

• High energy density, with PCS

and battery integrated into one

cabinet

• Space-saving design, requiring

minimal floor space

• Modular design for easy installation and capacity expansion

76

Technical Datasheet ASW 125K/261-PT Battery Parameter

Battery energy 261 kWh

Battery type LiFePO4 3.2 V / 314 Ah

Battery module energy 52 kWh

Rated voltage 832 V

Voltage range 728 V - 936 V

Battery system configuration 1P260S

Charge and discharge rate 0.5P

Cooling concept Liquid cooling

AC Parameter

Rated power 125 kW

Max. apparent power 137.5 kVA

Rated voltage 400 V

Voltage range 323 V - 460 V

Rated frequency 50 Hz / 60 Hz

Rated current 180 A

THD ≤ 3 %

Power factor -1 ~ +1

Overload capability 110% - longtime

General Parameter

System efficiency ≥ 90%

Cycle life ≥ 8000 times

Operating temperature range -25 °C ~ 55 °C

Operating humidity 5 % - 95 % R.H

Degree of protection IP55

Max. operating altitude 4000 m (≥2000m derating)

Dimension (W / H / D) 1300 / 1400 / 2350 mm

Weight 2.8 T

Firefighting system Aerosol

Communication interface CAN / RS485 / ETH / 4G

Smart

EV Charger

78

SOL APOLLO SERIES

SOL7.4H-WP, SOL7.4H-WS, SOL7.4H-WSS

SOL11H-WP, SOL11H-WS, SOL11H-WSS

SOL22H-WP, SOL22H-WS, SOL22H-WSS

Driving towards

a green future

Models:

SOL7.4H-WP, SOL7.4H-WS, SOL7.4H-WSS

SOL11H-WP, SOL11H-WS, SOL11H-WSS

SOL22H-WP, SOL22H-WS, SOL22H-WSS

Easy-to-install Safe & reliable Smart & Eco-friendly User-Friendly

• Easy-to-install with

standard tools

• Cable entry on the front

or rear of the housing

• Quick set-up via Bluetooth and App

• IP65 enclosure suitable

for indoor and outdoor

use

• IK10 protection rating

• TÜV IEC 61851-1 & CE

compliant

• Solar Eco Mode &

Automatic phase

switching

• Intelligent App for remote

control and monitoring

• Dynamic load balancing

• Remote update via App

• Lock / unlock the charger

via App

• Integrated RFID card

reader & NFC

• OCPP4

SOL APOLLO Series

AC EV Charger 7.4 to 22 kW

80

Technical Datasheet

SOL7.4HWP

SOL7.4HWS/WSS

SOL11HWP

SOL11HWS/WSS

SOL22HWP

SOL22HWS/WSS

Input & Output

Rated Voltage 230 V AC 400 V AC

Rated Frequency 50 Hz / 60 Hz

Max. Output Power 7.4 kW 11 kW 22 kW

Max. Output Current 32 A 16 A 32 A

Standby Power Consumption < 5 W

Residual Current Detection DC 6 mA

Connector Type (IEC62196-2) Type 2 Type 2 socket1,2 Type 2 Type 2 socket1,2 Type 2 Type 2 socket1,2

Cable Length 5 m / 7.5 m - 5 m / 7.5 m - 5 m / 7.5 m -

User Interface & Control

Network Interface Wi-Fi / Bluetooth / RS485 / LAN

RFID/NFC Reader ●

Status Indication LED Light strip

Smart App ●

Communication protocol OCPP1.6J 4

Working Environment

Ingress Protection IP65 (Enclosure)

Operating Temperature -25 °C ~ 50 °C

Storage Temperature -40 °C ~ 70 °C

Relative Humidity 5 % - 95 %（Non-condensing）

Altitude Up to 2000 m

Cooling Concept Natural convection

Mechanical

Impact Protection Class IK10

UV Resistant ●

Mounting Wall / Pedestal

Dimensions (W / H / D) 230 / 360 / 130 mm

Weight 4.0 kg / 5.0 kg 3.0 kg 4.0 kg / 4.5 kg 3.0 kg 5.0 kg / 6.5 kg 3.0 kg

Colour ● Morandi Blue / ● Black

Cable Holder ● - ● - ● -

Safety

DC Leakage Protection ●

Over Temperature Protection ●

Ground Protection ●

Surge Protection (EN60664) ● (Type III)

Certificate CE, TUV, IEC 61851-1, EN 18031, EN 303645

● standard features ○ optional features - not available

1

Self-closing cover and built in electronic lock is standard

2

Shutter for cover is optional

3

Optional energy meter for solar charging function and dynamic load balancing

4 OCPP1.6J is available from firmware 2.01 and above

Connect

& monitor Photo by Artem Podrez

82

Smart cloud-based

monitoring

& communication

systems

COM STICK SERIES

Wi-Fi Stick

Ai-Dongle LAN/WLAN

Ai-Dongle 4G

Ai-Logger 1000

CLOUD BASED MONITORING

Solplanet Cloud and App

Ai-Logger 2000

Ai-AMU 2000

Cloud & App

Easy-to-install Reliable User-friendly

• Quick setup and commissioning of

Solplanet inverters

• Quick active/reactive and export

power control setup

• Available on Android and iOS devices

and accessible via web browsers

• Cloud-based monitoring system

• Centralized management of all plant

data

• Intuitive navigation

• Clear readability of key plant data

• Performance reports sent via email

PV Plant monitoring plays an important role in our approach to revolutionizing access

to solar energy. Your energy generation and consumption are presented in simple and

easy to read graphs giving you a complete picture of your daily, monthly and yearly

usage. Our monitoring solution will help you adjust your consumption behaviours to

match your generation allowing you to make the most of your PV plant.

Real time and historical data are readily available via our cloud-based monitoring

portal, allowing you to compare your current performance to past results. Solplanet

Cloud, our new online monitoring portal, is perfect for home owners, business owners

and PV developers who want to monitor their PV Plants from anywhere in the world.

Smart cloud-based monitoring system

To download the App

search for “Solplanet” or simply

scan the QR codes:

Download on the Get it on

84

Ai-Dongle

LAN/WLAN

Wi-Fi

Stick

The Ai-Dongle LAN/WLAN/ Wi-Fi Stick allow Solplanet inverters to connect to

the Solplanet Cloud and App. The inverter and meter data is collected and sent to

the Solplanet Cloud via the internet to allow for easy PV plant monitoring.

Smart Simple Reliable

Technical Datasheet Wi-Fi Stick ASW-WLAN-G1 Device Management

Max. Number of Manageable Devices 5 5

Communication Interface

North Communication

LAN / LAN 10 / 100 Mbps

WLAN 2.4 GHz 802.11 b/g/n

South Communication RS 485 (USB Type A)

Interaction

LED LED Indicator x 2

APP Solplanet App

Environment

Operating Temperature Range -40 °C ~ 60 °C (-40 °F ~ 140 °F)

Storage Temperature -40 °C ~ 70 °C (-40 °F ~ 158 °F)

Relative Humidity 5 % - 95 % (Non-condensing)

Max. Operating Altitude 3,000 m (9, 842 ft.) 4,000 m (13,123 ft.)

Elec- trical

DC Power Supply 7 V - 9 V 5 V - 12 V

Power Consumption Typical 2 W, Max. 5 W

Mechanical

Dimensions (W / H / D) 51 / 112 / 27 mm 50 / 34 / 170 mm

Protection Degree IP65 IP66

Certificate CE

• Smart zero export control design • Easy to install on site • Adapt to various application scenarios

The Ai-Dongle 4G allows Solplanet inverters to connect to the Solplanet

Cloud and App. The inverter and meter data is collected and sent to the

Solplanet Cloud via the internet to allow for easy PV plant monitoring.

Smart Simple Reliable

Technical Datasheet ASW-4G-G1 Device Management

Max. Number of Manageable Devices 5

Communication Interface

Sim card type Micro SIM (12×15mm)

Supported standards & frequencies

LTE-FDD:B1/B3/B5/B7/B8/B20/B28

LTE-TDD:B38/B40/B41

GSM:GSM850/EGSMB900/DCS1800/PCS1900

Wi-Fi Operation Mode AP

Supported standards & frequencies 802.11b/g/n (2.412G ~ 2.484G)

South Communication RS 485 (USB Type A)

Interaction

LED LED Indicator x 2

App Solplanet App

Environment

Operating Temperature Range -40 °C ~ 60 °C (-40 °F ~ 140 °F)

Storage Temperature -40 °C ~ 70 °C (-40 °F ~ 158 °F)

Relative Humidity 5 % - 95 % (Non-condensing)

Max. Operating Altitude 4,000 m (13,123 ft.)

Elec- tricalDC Power Supply 5 V - 12 V

Power Consumption Typical 6.5 W, Max. 10 W

Mechanical

Dimensions (W / H / D) 50 / 34 / 154 mm

Protection Degree IP66

• 4G communication • Plug and play design, easy-to-install • IP66

Ai-Dongle 4G

86

Smart Simple Reliable

Ai-Logger 1000 data logger

Ai-Logger 1000 data logger allows Solplanet inverters to connect to the

Solplanet Cloud. The inverter and meter data is collected and sent to the

Solplanet Cloud via the internet to allow for easy PV plant monitoring.

• Smart zero export control design • Easy to install on site • Adapt to various application scenarios

* Each 485 interface can connect up to 30 inverters or 1 smart meter.

Technical Datasheet Ai-Logger 1000 Device Manage- ment

Max. Number of Manageable Devices* 80

Communication Interface

North Communication LAN LAN x 1, 10 / 100 / 1000 Mbps

South Communication RS485 COM x 3, 1000 m

Others Digital / Analog Input / Output DI x 4, DO x 2

Interaction

LED LED Indicator x 4 – COM 1~3, North communication

WEB Embedded Web

USB USB 2.0 x 1

RST 1

Environment

Operating Temperature Range -40 °C ~ 60 °C (-40 °F ~ 140 °F)

Storage Temperature -40 °C ~ 70 °C (-40 °F ~ 158 °F)

Relative Humidity 5 % - 95 %（Non-condensing）

Max. Operating Altitude 4,000 m (13,123 ft.)

Electrical

DC Power Supply 12 V - 24 V / 2 A

Power Consumption Typical 8 W, Max. 15 W

Mechanical

Dimensions (W / H / D) 240 / 126 / 42 mm

Protection Degree IP20

Installation Options Wall Mounting, DIN Rail Mounting, Tabletop Mounting

Ai-Logger 1000

Ai-Logger 2000

Ai-Logger 2000 high-performance data logger by Solplanet,

is used for monitoring inverters, transformer stations, as well

as third-party electricity meters and environmental monitoring

instruments,etc. By managing inverters, collecting data and

adjusting the operating status. It serves as a key connection

node between inverters and photovoltaic power plant monitoring

systems, enabling real-time monitoring and management

scheduling of photovoltaic plant data, enhancing the effciency of

power plant management and maintenance.

* Each 485 interface can connect up to 30 inverters or 1 environmental monitoring instrument or 1 electricity meter.

• Multi-scenario system

control

• Real-time response and rapid

operations maintenance,

effectively ensuring the safe

operation of power stations

• Adaptable to extreme

application environments

with long operational

uptime

• Source data desensitization

and encrypted

communication links

Safer Smarter More efficient More reliable

Technical Datasheet Ai-Logger 2000 Device Management

Max. number of devices access to RS485 180

Max. number of devices access to each port RS485: 30 ; ABUS:80; LAN / FE:32

Northbound Interface

WAN 2 × WAN

Optical fiber 2 × SFP

Southbound Interface

LAN 4 × LAN

Serial port 6 × RS485

AI port 4 × AI

DI port 4 × DI

DO port 4 × DO

PT100 / PT1000 2 × PT100 / PT1000

ABUS Max. voltage 800 V (±10%)

Power

DC power input 24 V / 0.8 A DC, 12 V / 2A DC

Consumption Typical 8 W ; Max. 15 W

DC power output 12 V / 100 mA

Human Machine Interface(HMI)

Indicator 3 × LED ; RUN, SERV, ALM

Commissioning Embedded Web

USB 1 × USB 2.0

Environmental Parameter

Operating temperature -30 °C ~ 60 °C

Storage temperature -40 °C ~ 70 °C

Relative humidity 5 % - 95 %（Non-condensing）

Altitude Max. 5000 m

Mechanical Parameter

Dimensions (W / H / D) 242 / 142 / 51.5mm (without installation accessories)

Ingress protection IP20

Mounting method Wall-mounted, rail-mounted, desktop

88

* Each 485 interface can connect up to 30 inverters or 1 environmental monitoring instrument or 1 electricity meter.

Technical Datasheet Ai-AMU 2000 Basic Parameter

Built-in data collector Ai-Logger 2000

Ethernet 2 × WAN, 4 × LAN

RS485 6×RS485

DI / DO / AI 4 × DI / 4 × DO / 4 × AI

PT100 / PT1000 2

Fiber 2 × SFP

USB 1

ABUS port 2

Anti-PID module 2

Environmental Parameter

Operating temperature -30 °C ~ 60 °C

Relative humidity 0% - 100% (non-condensing)

Altitude Max. 5000 m

Electrical Parameter

AC input voltage 100 V - 240 V, L / N (L)+PE

ABUS input voltage 380 V - 800 V, 3Ph

Anti-PID input voltage 380 V - 800 V, 3Ph+FE

Anti-PID output voltage 0 / ± 750 V

AC input frequency 50 Hz / 60 Hz

Consumption

Self consumption Max. 250 W

Mechanical Parameter

Dimensions (W / H / D) 670 / 760 / 200 mm (without installation accessories)

Ingress protection IP66

Mounting Wall mounted, rack mounted, ground mounted

Ai-AMU 2000

The Ai-AMU 2000 photovoltaic array management unit from

Solplanet is a highly integrated and intelligent all-in-one

communication cabinet specifically developed for utility

scenarios. It can achieve real-time monitoring of PV plant data,

prevent the PID effects of PV modules, and adapt to an optical

fiber ring network. Serving as a key connection node between

the photovoltaic array system and the power plant monitoring

system, it intelligently manages the photovoltaic array, helping

users enhance the management and operational efficiency of

photovoltaic power plants.

• Provide embedded web services

for quick steup and convenient

parameter settings

• Industrial-grade cpmponent

selection with built-in highperformance surge protectors

ensuring safety and reliablity

• Support connection of up to

180n inverters, with one-stop

calibration and deployment

More flexible and smarter Simpler and easier to use More stable and reliable

EMS APP

AISWEI Cloud Distribution Box

Load

Grid

PV Inverter

PV Array PV Array

...

DC

AC

Internet

RS485

Wireless

ASW RESIDENTIAL SOLUTION

90

AISWEI Cloud

EMS APP

Load

AC Combiner Box

Grid

Distribution Cabinet

DC

AC

Internet

RS485

Wireless

PV Array PV Array

PV Inverter PV Inverter

Ai Logger

Smart Meter

Weather Station

...

...

ASW C&I SOLUTION

STORAGE SOLUTION

PV Array

Hybrid Inverter Battery

Household Load

Grid

DC

AC

Internet

CAN

RS485

Wireless

AISWEI Cloud

EMS APP

WLAN Router

EPS Load

92

Internationally

accredited laboratory

Our products are tested and certified according to strict international quality

standards.

In addition to international quality test and certification of our products,

our quality centre is also contributor and formulator of many international

standards and the main drafting company of the China Quality Certification

Center “Standards for Certification of Household Roof Solar System”.

Photo by Raja Tilkian EN EU 202605/ All products and services described and all technical data are subject to change at any time without notice. AISWEI assumes no liability for typographical and other errors.

SOLPLANET INTERNATIONAL

info@solplanet.net

sales@solplanet.net

service.LATAM@solplanet.net

service.EMEA@solplanet.net

service.APAC@solplanet.net

Scan QR code and contact your local team

www.solplanet.net