浙江午马减速机有限公司-机械 - 电子画册在线预览、各类电子画册在线制作-云展网平台

四、机型号表示示例 Example for type designation
型号中的字母代表Letter sign

L	W	Y	D	E	B	T	N	Z
立式	卧式	普通电机法兰	表示带电机	双级	防爆电机	调速电机	制动电机	直流电机
Vertical	horizontal	motor flange	with motor	Two stagereduce	with explosionproof motor	reduce motor	brake motor	DC motor

五、摆线减速机许用扭矩表 Table of allowable torque of cycloid speed reducer

机型Type	X2	X3	X4	X5	X6	X7	X8	X9	X10	X11
许用扭矩极限值N.mLimited torque dataN.m	150	250	500	1000	2000	2700	4500	7100	12000	20000

午马减速机

六、单级X摆线减速机型号规格及选型参考
Model and specification of single stage X cycloid speed reducer and reference for its model selection

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducer ratio
		9	11	17	23	29	35	43	59	71	87
			输出扭矩N.m Output torque
X2	0.37	20.4	24.9	38.5	52.1	65.7	79.3	97.2	133
	0.55	30.3	37.1	57.4	77.6	97.2	117	145
	0.75	41.4	50.5	78.3	106	133	-	-	-
	1.1		-			-		一	-
	1.5	-	-	-	-			-	-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	155	127	82	60	48	40	32	23
当输入960r/min时When 960r/min input	power of motordisposed	106	87	56	41	33	27	22	16

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		9	11	17	23	29	35	43	59	71	87
			输出扭矩N.m Output torque
X3	0.55	30.3	37.1	57.4	77.6	97.2	117	145	199	239
	0.75	41.4	50.5	78.3	106	133	161	198	271
	1.1	60.5	74	114	155	195	235	-	-
	1.5	82.9	100	156	211	266	-	-	-
	2.2	121	148	230				-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	155	127	82	60	48	40	32	23	20
当输入960r/min时When 960r/min input	power of motordisposed	106	87	56	41	33	27	22	16	13

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		9	11	17	23	29	35	43	59	71	87
			输出扭矩N.m Output torque
X4	0.75	41.4	50.5	78.3	106	133	161	198	271	326	400
	1.1	60.5	74	114	155	195	235	289	397	478
	1.5	82.9	100	156	211	266	322	396	-
	2.2	121	148	229	310	391	472	-	一
	3.0	165	202	313	423	一	-	-
	4	220	270	416	1	-	-	-	-	-	-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	155	127	82	60	48	40	32	23	20	17
当输入960r/min时When 960r/min input	power of motordisposed	106	87	56	41	33	27	22	16	13	11

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		9	11	17	23	29	35	43	59	71	87
			输出扭矩N.m Output torque
X5	1.5	82.9	100	156	211	266	322	396	542	653	801
	2.2	121	148	229	310	391	472	580	796	958
	3.0	165	202	313	423	533	644	792	-
	4.0	220	270	416	564	712	859	一	-		一
	5.5	304	370	574	776	979	-		-		-
	7.5	414	506	783	-		-	-	-		一
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	155	127	82	60	48	40	32	23	20	17
当输入960r/min时When 960r/min input	power of motordisposed	106	87	56	41	33	27	22	16	13	11
X6	2.2	121	148	229	310	391	472	580	796	958	1174
	3.0	165	202	313	423	533	644	792	1086	1307	1602
	4.0	220	270	416	564	712	859	1055	1450	1743
	5.5	304	370	574	776	979	1181	1451			一
	7.5	414	506	783	1059	1335	1612	-	-
	11	607	743	1148	1553		-	-	一	-	一
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	155	127	82	60	48	40	32	23	20	17
当输入960r/min时When 960r/min input	power of motordisposed	106	87	56	41	33	27	22	16	13	11

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		9	11	17	23	29	35	43	59	71	87
					输出扭矩N.m Output torque
X7	3.0	165	202	313	423	533	644	792	1086	1307	1602
	4.0	220	270	416	564	712	859	1055	1450
	5.5	304	370	574	776	979	1181	1451	-
	7.5	414	506	783	1059	1335	1612		-		-
	11	607	743	1148	1553	一	-	-	-		-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	155	127	82	60	48	40	32	23	20	17
当输入960r/min时When 960r/min input	power of motordisposed	106	87	56	41	33	27	22	16	13	11

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducer ratio
		9	11	17	23	29	35	43	59	71	87
		输出扭矩N.m Output torque
X8	5.5	304	370	574	776	979	1181	1451	1992	2397	2937
	7.5	414	506	783	1059	1335	1612	1979	2716	3268	3791
	11	607	742	1147	1553	1958	2363	2903	4110
	15	831	1015	1572	2148	2686	3223	4028	-
	18.5	1489	1821	2896	3808	一	-	-	-		-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	155	127	82	60	48	40	32	23	20	17
当输入960r/min时When 960r/min input	power of motordisposed	106	87	56	41	33	27	22	16	13	11

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		9	11	17	23	29	35	43	59	71	87
					输出扭矩N.m Output torque
X9	7.5	414	506	783	1059	1335	1612	1979	2716	3268	3791
	11	607	742	1147	1553	1969	2363	2954	4110	4729	5561
	15	831	1015	1572	2148	2686	3223	4028	5605
	18.5	1489	1821	2896	3808	4803	5796	7121	-		-
	22	1771	2165	3346	4527	5709	6890		-	一	一
	30	2416	2954	4566	6179		-	-	-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	155	127	82	60	48	40	32	23	20	17
当输入960r/min时When 960r/min input	power of motordisposed	106	87	56	41	33	27	22	16	13	11

午马减速机

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		9	11	17	23	29	35	43	59	71	87
		输出扭矩N.m Output torque
X10	15	一	1015	1572	2148	2685	3223	4028	5605	6446	7583
	18.5	-	1821	2896	3808	4803	5796	7121	9772	11759	-
	22	-	2165	3346	4527	5709	6890	8465	11625	-	-
	30	1	2954	4566	6179	7791	9403	11552	-	-	-
	37	-	3641	5627	7614	9610	11587	-	-	-	-
	45	-	4428	6843	9259	11674	-	-	-	-	-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	-	127	82	60	48	40	32	23	20	17
当输入960r/min时When 960r/min input	power of motordisposed	-	87	56	41	33	27	22	16	13	11

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		9	11	17	23	29	35	43	59	71	87
		输出扭矩N.m Output torque
X11	18.5	一	1821	2896	3808	4803	5796	7121	9772	11759	14455
	22	-	2165	3346	4527	5709	6890	8465	11625	14545	-
	30	-	2954	4566	6179	7791	9403	11552	16115	-	-
	37	-	3641	5627	7614	9610	11587	14455	-	-	-
	45	-	4428	6843	9259	11674	14325	-	-	-	-
	55	-	5496	8441	11529	14325	17508	-	1	-	-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	1	127	82	60	48	40	32	23	20	17
当输入960r/min时When 960r/min input	power of motordisposed		87	56	41	33	27	22	16	13	11

注：1、“-”如须选用特殊订货
2、参考表中的输出扭矩是按电机功率15KW以下为4极电机1400r/min时值。18.5KW及以上按6极电机960r/min时值。
Note:1."-" need special ordering
2.The output torque in reference table is for 4 pole,1400r/min motor below 15KW.For 18.5KW and above per 6 pole 960r/min motor data.

七、双级减速机型号规格及选型参考

Model and specifications of double-stage reducer and reference for its model selection.

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		12111×11	18711×17	28917×17	38511×35	47311×43	59517×35	73117×43	98923×43	122535×35	184943×43
		输出扭矩N.m Output torque
XE42	0.37	244	376	490	-			-			-
	0.55	363	454	-	-	-		-	-	-	-
	0.75	495	-	-	-	1	-	-	-	-	-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	11.5	7.5	4.8	3.6	3	2.3	1.9	1.4	1.1	0.7
当输入960r/min时When 960r/min input	power of motordisposed	8	5	3.3	2.5	2	1.6	1.3	1.0	0.8	0.5

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		12111×11	18711×17	28917×17	38511×35	47311×43	59517×35	73117×43	98923×43	122535×35	184943×43
		输出扭矩N.mOutput torque
XE53	0.55	363	560	867	981	-	1	一		-	一
	0.75	495	765	981	-	一	-	-	-	-	-
	1.1	726	981	-	-	-	=	-	-	-	-
	1.5	990	-	-	-	1	-	-	-	-	1
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	11.5	7.5	4.8	3.6	3	2.3	1.9	1.4	1.1	0.7
当输入960r/min时When 960r/min input	power of motordisposed	8	5	3.3	2.5	2	1.6	1.3	1.0	0.8	0.5
XE63	0.75	495	765	1183	1576	1807	1961				-
	1.1	726	1122	1735	1961		-			-	-
	1.5	990	1531	1961	-	一	-		-	-
	2.2	1452	1950	-	一				-	-	-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	11.5	7.5	4.8	3.6	3	2.3	1.9	1.4	1.1	0.7
当输入960r/min时When 960r/min input	power of motordisposed	8	5	3.3	2.5	2	1.6	1.3	1.0	0.8	0.5

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducer ratio
		12111×11	18711×17	28917×17	38511×35	47311×43	59517×35	73117×43	98923×43	122535×35	184943×43
		输出扭矩N.mOutput torque
XE64	0.75	495	765	1183	1576	1936
	1.1	726	1122	1735	1936					1	-
	1.5	990	1531	1936	一	一	一		一
	2.2	1452	1936	-	-	-			-		-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	11.5	7.5	4.8	3.6	3	2.3	1.9	1.4	1.1	0.7
当输入960r/min时When 960r/min input	power of motordisposed	8	5	3.3	2.5	2	1.6	1.3	1.0	0.8	0.5

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		12111×11	18711×17	28917×17	38511×35	47311×43	59517×35	73117×43	98923×43	122535×35	184943×43
		输出扭矩N.mOutput torque
XE74	1.1	726	1122	1735	2150	2648
	1.5	990	1531	2366	2648	一			-		一
	2.2	1452	2244	2650	-		-	-	-	-	-
	3.0	1981	2700	-	-		一		1	一	-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	11.5	7.5	4.8	3.6	3	2.3	1.9	1.4	1.1	0.7
当输入960r/min时When 960r/min input	power of motordisposed	8	5	3.3	2.5	2	1.6	1.3	1.0	0.8	0.5

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		12111×11	18711×17	28917×17	38511×35	47311×43	59517×35	73117×43	98923×43	122535×35	184943×43
		输出扭矩N.mOutput torque
XE84	1.5	990	1531	2366	3152	3872	4413	一
	2.2	1452	2244	3469	4014	4413				-	-
	3.0	1981	3062	4910	4413		-	-		-	-
	4.0	2641	4082	4413	-		-			一	一
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	11.5	7.5	4.8	3.6	3	2.3	1.9	1.4	1.1	0.7
当输入960r/min时When 960r/min input	power of motordisposed	8	5	3.3	2.5	2	1.6	1.3	1.0	0.8	0.5

午马减速机

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		12111×11	18711×17	28917×17	38511×35	47311×43	59517×35	73117×43	98923×43	122535×35	184943×43
		输出扭矩N.m Output torque
XE85	2.2	1452	2244	3469	4314
	3.0	1981	3062	4310	4413					一
	4.0	2641	4082	4413			-			-	-
	5.5	3633	4413
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	11.5	7.5	4.8	3.6	3	2.3	1.9	1.4	1.1	0.7
当输入960r/min时When 960r/min input	power of motordisposed	8	5	3.3	2.5	2	1.6	1.3	1.0	0.8	0.5

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		12111×11	18711×17	28917×17	38511×35	47311×43	59517×35	73117×43	98923×43	122535×35	184943×43
					输出扭矩N.mOutput torque
XE95	3.0	1981	3062	4732	6305	7220	7990	8820
	4.0	2641	4082	6309	7843	8820					-
	5.5	3633	5614	7840	8820					-	一
	7.5	4953	7142	8820
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	11.5	7.5	4.8	3.6	3	2.3	1.9	1.4	1.1	0.7
当输入960r/min时When 960r/min input	power of motordisposed	8	5	3.3	2.5	2	1.6	1.3	1.0	0.8	0.5

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducerratio
		12111×11	18711×17	28917×17	38511×35	47311×43	59517×35	73117×43	98923×43	122535×35	184943×43
			输出扭矩N.m Output torque
XE106	4.0	2641	4082	6309	8405	10326	11767
	5.5	3633	5614	8677	11560	11767
	7.5	4953	7656	11767	1			-
	11	7259	11767		-	-	1	-		=	-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	11.5	7.5	4.8	3.6	3	2.3	1.9	1.4	1.1	0.7
当输入960r/min时When 960r/min input	power of motordisposed	8	5	3.3	2.5	2	1.6	1.3	1.0	0.8	0.5

机型Type	配置电机功率(KW)Power of motordisposed	减速机 Reducer ratio
		12111×11	18711×17	28917×17	38511×35	47311×43	59517×35	73117×43	98923×43	122535×35	184943×43
		输出扭矩N.m Output torque
XE117	4.0	2641	4082	6309	8405	10326	12986	15955	17310	19612
	5.5	3633	5614	8677	11560	14195	17856	19612
	7.5	4953	7656	11832	15755	17067	19612	一
	11	7259	11219	17346	19612	-		一	-	-
	15	9900	15305	19612						-
当输入1400r/min时When 1400r/min input	输出转数r/minOutput revolution	11.5	7.5	4.8	3.6	3	2.3	1.9	1.4	1.1	0.7
当输入960r/min时When 960r/min input	power of motordisposed	8	5	3.3	2.5	2	1.6	1.3	1.0	0.8	0.5

八.BW、BWD、XW、XWD型(单级)外形及安装尺寸 Model BW、BWD、XW、XWD (single reduction)contour and installation dimension

机型Type	外形尺寸Contour Dimensions								安装尺寸Installation Dimensions										轴端尺寸Size of Shaft End								重量weight(kg)
	M	W	Z		一	X	J		H	E	F	P	Q	R	S	T	N	G	B	C	D	L	b	C	d	y	BWD约
			BW	BWD
BW.BWD09-9
B09	100	144	192	142	155	140			80	47	12	76	120		M5	35	4	11	6	24.5	22	30	5	17	15	22	8.5
BO	120	185	214	165	190	168				100	93	15	90	150		M8	35	4	11	8	33	30	35	5	17	15	22

B1	160	280	263	194	250	200						120	125	15	110	240		M10	55	4	13	10	38	35	56	6	20.5	18	35

B2	200	320	320	246	296	240			É	140	144	20	150	280	65	M10	60	4	13	14	48.5	45	71	6	24.5	22	40	40
								详
B3	250	390	390	294	355	300						160	159	25	200	340	100	M12	75	4	17	16	59	55	80	8	33	30	55

B4	380	400	479	370	430	340	10	第	3	200	155	25	320	340	150	M12	80	4	22	20	74.5	70	102	10	38	35	62
								103
B5	440	470	564	438	513	400	10	104		4	240	159	32	380	420		M16	80	4	22	25	95	90	120	14	48.5	45	70
								104
B6	520	560	668	528	605	500		页			280	199	35	440	500		M 20	90	4	26	28	106	100	139	14	53.5	50	80

B7	600	690	775	578	706	575				325	230	40	500	630		M 24	105	6	26	28	116	110	150	16	59	55	90

B8	810	880	1061	814	880	700					420	324	50	660	800		M30	160	6	32	32	137	130	202	20	74.5	70	120

B9	1040	1160	1462	1151	1160	1000			540		485	60	840	1050		M42	200	6	45	45	190	180	330	25	95	90	150	2500
XW.XWD1-12
X1	120	180	197	147	175	140			100	60	12	90	150		M5	35	4	12	8	28	25	35	5	17	15	22	8.5
X2	120	210	216	164	190	168				100	101	15	90	180		M8	45	4	12	8	28	25	34	5	17	15	22

X3	150	290	263	194	270	200				140	151	20	100	250		M10	55	4	16	10	38	35	56	6	20.5	18	35

X4	195	330	320	246	316	240					150	169	22	145	290		M10	65	4	16	14	48.5	45	74	6	24.5	22	40

X5	260	410	401	305	356	300		.详	羊		160	206	25	150	370		M12	75	4	16	16	59	55	91	8	33	30	55
								见
X6	335	430	466	359	425	340		见			200	125	30	275	380		M12	75	4	22	18	69	65	89	10	38	35	62
								第
X7	380	470	484	377	484	340	10	103	3	220	145	30	320	420		M12	95	4	22	22	85	80	109	12	43	40	65
								704
X8	440	530	564	438	514	400		104			250	155	35	380	480		M16	120	4	22	25	95	90	120	14	48.5	45	70
								页
X9	560	620	691	528	614	500				290	186	40	480	560		M 20	120	4	26	28	106	100	141	14	53.5	50	80

X10	600	690	775	578	706	575					325	230	40	500	630		M24	105	6	26	28	116	110	150	16	59	55	90

X11	810	880	1061	814	880	700				420	324	50	660	800		M30	160	6	32	32	137	130	202	20	74.5	70	120

X12	1040	1160	1462	1151	1160	1000					540	485	60	840	1050		M42	200	6	45	45	190	180	330	25	95	90	150	2500

午马减速机

九.BL、BLD、XL、XLD型(单级)外形及安装尺寸

Model BL、BLD、XL、XLD(single reduction)contour and installation dimension

机型Type	外形尺寸Contour Dimensions				安装尺寸Installation Dimensions								轴端尺寸Size of Shaft End								重量weight(kg)
	H		M	J	E	F	G	N	P	Q	R	S	B	C	D	L	b	C	d	y	BW	BWD约
	BL	BLD	M	J	E	F	G	N	P	Q	R	S	B	C	D	L	b	C	d	y	BW	BWD约
BL、BLD09-9				详见第103104页
B09	192	142	160		35	10	11	4	110	134	3	M5	6	24.5	22	30	5	17	15	22	8	BL重量+电动机重量
BO	214	165	190		39	10	11	4	140	160	3	M8	8	33	30	35	5	17	15	22	15
B1	263	194	230		61	12	11	6	170	200	4	M10	10	38	35	46	6	20.5	18	35	22
B2	320	246	260		70	15	11	6	200	230	4	M10	14	48.5	45	61	6	24.5	22	40	43
B3	390	294	340		80	20	13	6	270	310	5	M12	16	59	55	74	8	33	30	55	79
B4	477	370	400		100	22	15	8	320	360	5	M12	20	74.5	70	92	10	38	35	62	127
B5	564	438	490		115	30	18	12	400	450	5	M16	25	95	90	108	14	48.5	45	70	200
B6	668	528	580		139	35	22	12	460	520	8	M 20	28	106	100	130	14	53.5	50	80	400
B7	775	578	650		182	40	22	12	520	590	10	M 24	28	116	110	142	16	59	55	90	620
B8	1061	814	880		210	50	38	12	680	800	10	M 30	32	137	130	202	20	74.5	70	120	1220
B9	1462	1151	1160		370	60	39	8	900	1020	10	M42	45	190	180	330	25	95	90	150	2500
XL、XLD1-12
X1	197	147	160	详见第103104页	48	9	12	4	110	134	3	M5	8	28	25	35	5	17	15	22	8.5	XL重量+电动机重量
X2	216	164	180		42	12	12	6	130	160	3	M8	8	28	25	34	6	17	15	22	15
X3	263	194	230		51	15	12	6	170	200	4	M10	10	38	35	46	6	205	18	35	22
X4	324	250	260		79	15	12	6	200	230	4	M10	14	48.5	45	63	6	24.5	22	40	43
X5	401	305	340		93	20	12	6	270	310	4	M12	16	59	55	85	8	33	30	55	88
X6	466	359	400		92	22	16	8	316	360	5	M12	18	69	65	80	10	38	35	62	130
X7	484	377	430		114	22	18	8	345	390	5	M12	22	85	80	96	12	43	40	65	145
X8	564	438	490		115	30	18	12	400	450	6	M16	25	95	90	110	14	485	45	70	195
X9	691	551	580		170	35	22	12	455	520	8	M20	28	106	100	132	14	53.5	50	80	395
X10	775	578	650		182	40	22	12	520	590	10	M 24	28	116	110	142	16	59	55	90	620
X11	1061	814	880		210	50	38	12	680	800	10	M30	32	137	130	202	20	74.5	70	120	1220
X12	1462	1151	1160		370	60	39	8	900	1020	10	M42	45	190	180	320	25	95	90	150	2500

十.BWE、BWED、XWE、XWED型(双级)外形及安装尺寸 Model BW、BWED、XWE、XWED (double reduction) contour and installation dimension

机型Type	外形尺寸Contour Dimensions									安装尺寸Installation Dimensions											轴端尺寸Size of Shaft End								重量weight(kg)
	M	W	Z		一	X	J			H		E	F	P	Q	R	S	T	N	G	B	C	D	L	b	C	d	y	BWE	BWED约
			BWE	BWED
BWE、BWED10-95号
B10	160	280	317	267	250	200				120		124	15	110	240		M10	55	4	13	10	38	35	56	5	17	15	22	43	45
B20	200	320	364	315	306	240					140	144	20	150	240		M10	60	4	13	14	48.5	45	71	5	17	15	22	50	BWE重量+电动机重量

B31	250	390	446	376	356	300						160	159	25	200	340	65	M12	75	4	17	16	59	55	80	6	21	18	35		90

B41	380	400	523	454	425	340							200	155	25	320	340	65	M12	80	4	22	20	74.5	70	102	6	20.5	18		35	140

B42	380	400	554	479	425	340			详			200	155	25	320	340	100	M12	80	4	22	20	74.5	70	102	6	24.5	22	40		155
									见
B52	440	470	623	548	504	400			见			240	158	32	380	420		M16	80	4	22	25	95	90	120	6	24.5	22	40		240
									第
B53	440	470	657	561	504	400	10		103		3	240	158	32	380	420		M16	80	4	22	25	95	90	120	8	33	30	55		260
									104
B63	520	560	741	645	605	500	104						280	199	35	440	500		M 20	90	4	26	28	106	100	139	8	33	30		55	460
								页
B74	600	690	832	725	706	575						325	230	40	500	630		M24	105	6	26	28	116	110	150	10	38	35	62		680

B84	810	880	1071	962	880	700						420	324	50	660	800		M30	160	6	32	32	137	130	202	10	38	35	62		1320

B85	810	880	1095	970	880	700					420	324	50	660	800		M 30	160	6	32	32	137	130	202	14	48.5	45	70	1350

B95	1040	1160	1502	1350	1160	1000					540		485	60	840	1050		M42	200	6	45	45	190	180	330	14	48.5	45	70		2750
XWE、XWED42-128号
X32	150	290	314	364	270	200				140		151	20	100	250		M10	55	4	16	10	38	35	56	5	17	15	22	40	XWE重量+电动机重量
X42	195	330	370	315	316	240						150	169	22	145	290		M10	65	4	16	14	48.5	45	72	5	17	15	22		50

X53	260	410	457	387	356	300						160	206	25	150	370		M12	75	4	16	16	59	55	91	6	205	18	35		110

X63	335	430	510	441	425	340							200	125	30	275	380		M12	75	4	22	18	69	65	89	6	205	18		35	150

X64	335	430	541	466	425	340						200	125	30	275	380		M12	75	4	22	18	69	65	89	6	24.5	22	40		160
									详
X74	380	470	561	486	484	340						220	145	30	320	420		M12	95	4	22	22	85	80	109	6	24.5	22	40		230

X84	440	530	623	548	514	400	10		第			3	250	155	35	380	480		M16	120	4	22	25	95	90	120	6	24.5	22		40	260
									103
X85	440	530	682	586	514	400	10		104		4	250	155	35	380	480		M16	120	4	22	25	95	90	120	8	33	30	55		290
									104
X95	560	620	762	667	614	500			页			290	186	40	480	560		M 20	120	4	26	28	106	100	141	8	33	30	55		470

X106	600	690	832	725	706	575						325	230	40	500	630		M24	105	6	26	28	116	110	150	10	38	35	62		680

X117	810	880	1071	962	880	700						420	324	50	660	800		M 30	160	6	32	32	137	130	202	12	43	40	65		1320

X118	810	880	1095	970	880	700					420	324	50	660	800		M30	160	6	32	32	137	130	202	14	49	45	70	1350

X128	1040	1160	1445	1320	1160	1000						540		485	60	840	1050		M42	200	6	45	45	190	180	330	14	48.5	45		70	2750

午马减速机

十一.BLE、BLED、XLE、XLED型(双级)外形及安装尺寸

Model BLE、BLED、XLE、XLED (double reduction) contour and installation dimension

机型Type	外形尺寸Contour Dimensions					安装尺寸Installation Dimensions								轴端尺寸Size of Shaft End								重量weight(kg)
	H		M	J		E	F	G	N	P	Q	R	S	B	C	D	L	b	C	d	y	BLE	BLED约
	BL	BLD
BLE、BLED10-95号
B10	317	267	230			61	12	11	6	170	200	4	M 10	10	38.5	35	49	5	17	15	22	38	40
B20	368	318	260				70	15	11	6	200	230	4	M10	14	48.5	45	61	5	17	15	22	50

B31	446	376	340					80	20	13	6	270	310	5	M12	16	59	55	74	6	20.5	18	35	95

B41	521	454	400				100	22	15	8	320	360	5	M12	20	74.5	70	92	6	20.5	18	35	145
					送。
B42	554	479	400					100	22	15	8	320	360	5	M12	20	74.5	70	92	6	24.5	22	40	160
					见
B52	623	548	490	第	签		115	30	18	12	400	450	5	M16	25	95	90	108	6	24.5	22	40	240
					弟
B53	657	561	490	10	103		3	115	30	18	12	400	450	5	M16	25	95	90	108	8	33	30	55	260

B63	741	645	580	10	104	4	139	35	22	12	460	520	8	M 20	28	106	100	130	8	33	30	55	460
					百
B74	832	725	650					182	40	22	12	520	590	10	M 24	28	116	110	142	10	38	35	62	690

B84	1071	962	880				210	50	38	12	680	800	10	M 30	32	137	130	202	10	38	35	62	1340

B85	1095	970	880					210	50	38	12	680	800	10	M30	32	137	130	202	14	48.5	45	70	1370

B95	1502	1350	1160			370	60	39	8	900	1020	10	M42	45	190	180	330	14	48.5	45	70	2750
XLE、XLED42-128号
X32	314	264	230			51	15	12	6	170	200	4	M10	10	38	35	46	5	17	15	22	38	XLE重量+电动机重量
X42	370	320	260				79	20	12	6	200	230	4	M 10	14	48.5	45	63	5	17	15	22		50

X53	457	389	340					93	22	12	6	270	310	4	M12	16	59	55	85	6	20.5	18		35	110

X63	510	441	400				92	22	16	8	316	360	5	M12	18	69	65	80	6	20.5	18	35		155

X64	541	466	400		送			92	22	16	8	316	360	5	M12	18	69	65	80	6	24.5	22		40	170
					评
X74	561	486	430		见			114	22	18	8	345	390	5	M16	22	85	80	96	6	24.5	22		40	230

X84	623	548	490		第		2	115	30	18	12	400	450	6	M16	25	95	90	110	6	24.5	22		40	260
					103
X85	658	588	490	10		4	115	30	18	12	400	450	6	M16	25	95	90	110	8	33	30	55		280
					104
X95	762	667	580	页				170	35	22	12	455	520	8	M 20	28	106	100	132	8	33	30		55	480

X106	832	725	650				182	40	22	12	520	590	10	M24	28	116	110	142	10	38	35	62		690

X117	1108	983	880					210	50	38	12	680	800	10	M 30	32	137	130	202	12	43	40		65	1340

X118	1095	970	880				210	50	38	12	680	800	10	M30	32	137	130	202	14	48.5	45	70	1370

X128	1445	1320	1160				370	60	39	8	900	1020	10	M42	45	190	180	320	14	48.5	45	70	2750

十二、选用说明 Procurement guide

1、由于本机为定转矩设计，故选型时请选用实际转矩应小于本机额定转矩，最大瞬时负荷或起动负荷应小于本机额定负荷的160%。

2、如果输入轴转速是变化的应根据使用条件，如果要求功率一定，则按最低转速所需功率选取；如要求扭矩一定，则按高速时所需的功率选取。

3、另外应考虑工作情况系数和功率损失，则应对工作扭矩（或功率）乘以工况系数K。

4、在可能出现过载现象的场合，应安装过载保护装置。以防减速机及其所配的各种原动力因传递大而导致损坏。

1. It is designed based on a constant torque, the refore, during type selection, actual working torque shall be less than the rated torque, and maximum instantaneous load or start load shall be less than 160% of the rated load

2. If input spindle rotation speed is variable, it shall be in accordance with actual working conditions, if required power is constant, then the power shall satisfy the requirements of the lowest speed; if required torque is constant, then the power shall satisfy the requirements of the highest speed.

3. In addition, consider working coefficients and power loss, therefore, the working torque(or power)shall be multiplied by working coefficient K.

4. In conditions when overload is likely to occur, overload protection devices shall be installed, to avoid damages caused by the great transferred force from speed reducers and attached various power sources.

十三、工况系数表 Working coefficient table

动力源种类Power source type	工作条件Working conditions	负荷性质Load nature
动力源种类Power source type	工作条件Working conditions	稳定（1）Stable（1）	中等冲击(II)Medium impact(II)	较大冲击或惯性冲击（IⅢI）Strong impact or inertia impact (III)
电动机Motor	间断工作3小时/日Of starts per hour 3	0.8	0.8	1.4
	8-10小时/日8-10hours/day	1.0	1.0	1.5
	连续工作24小时/日Continuous 24 hours/day work	1.2	1.2	1.6

十四、减速机用途和载荷性质分类参数表

Table of purposes and load natures of speed reducer

用途Purposes		载荷分类	用途Purposes		载荷分类
搅拌器 Agitators	纯液体Pure liquid	I	*塑料挤出机Plastic extrudingmachine	薄膜 Diaphragm	1
	液体和固体Liquid and soild	ⅡI		棒材 Rods
	液体（密度可变）Liquid(variable density）			管材 Pipes
鼓风机 Blower	离心式Centrifugal type	I		吹塑机Plastic blowing machine	ⅡI
	叶片式Blade type		卷扬机（绞车）Winding machine(winding engine)	重型的 Heavy-duty	Ⅲ
	叶轮式Impeller type	ⅡI		中型的 Medium-duty	ⅡI
压气机压缩机Air compressorCompressor	离心式Centrifugal type	I				辊道 rolling path
			ⅢⅢ
	叶轮式Impeller type	ⅡI		碎皮机(矿石)Cracking machine(ores)
	往复式(多缸)Reciprocating type (multi-cylinder)
				锤式粉碎机 Hammer type pulverizing machine
	往复式(单缸)Reciprocating type (single-cylinder)	Ⅲ	混凝土搅拌机 Concrete blending machine		ⅡI
运输机(载荷稳定)Conveyer(Stable load)	板式 Plate type	I	石油工业	石胶压滤机Colloid pressure filtering machine
	皮带式 Strap type			结晶品、冷冻器 Crystal products,condenser
	斗式Hopper type		橡胶与塑料工业	破机Pulverizing machine	Ⅲ
	链式 Chain type			混炼机 Mixing refinery machine
	螺旋式 Screw type			精炼机 Refinery machine	ⅡI
运输机(重载荷非均匀送料)Conveyer(Heavyload,non-uniformmaterial feeding)	板式 Cordially	ⅡI		橡胶压延机 Rubber pressing machine
	皮带式 Strap type		纺织工业	织布机 Weaving machine	ⅡI
	斗式Hopper type			梳棉（毛麻）机 Carding machine
	链式 Chain type			轧布机 Mangling machine
	往复式Reciprocating type			纺纱机 Spinning machine
	螺旋式 Screw type			洗涤机 Washing machine
	振动式Vibration type	Ⅲ

十五、选择方式示例 Examples of selection

有搅拌器一台，只知道装入液体和固体材料混合搅拌，24小时工作，搅拌器转速32r/min，功率11kw，试问该如何选择减速机型号和电动机？

1.查载荷分类表知为II类 2.查工况系数表为1.35

即确11×1.35=14.85，即确定功率为15kw，电动机(4)级，转速32r/min，减速比为1400/32=43.75，即确定为减速比为43。

计算减速机应能承载的扭矩(N.m)=输入功率×9550/输出转速r/min×效率×使用系数，

即15×9550/32×0.90×1.35=5499.45(N.m),即取5499(N.m)

根据型号规格选型参数表造取

i: 43,5499(N.m)即X9#15kw, 5772(N.m)满足要求

则型号规格为XLD15-9-43，即为X9#立式摆线减速机，电机直连安装，功率15kw(4级)，速比43。

A blender, only that liquid and solid materials are input for blending is known, works continuously for 24 hours, rotation speed is 32r/min, power is 11kw, how to select the type of speed reducer and motor?

1. Il type after checking load type table. 2.1.35 after checking working coefficient table.

11×1.35=14.85, so power is 15kw, motor is of 4 stages, rotation speed is 32r/min, speed reduction ratio is 31/1400=43.75, therefore, speed reduction ratio is 43.

To calculate maximum torque allowed on speed reducer (N.m)= Input power 9550/output rotation speed r/min efficiency coefficient, that is 15× 9550/32× 0.90× 1.35=5499.45, taken as 5499(N.m).

According to table of types and parameters, take i:43, 5499(N.m), that is X9# 15kw, 5772(N.m), as per requirements. Then type shall be XLD 15-9-43, that is X9# vertical cycloid speed reducer, with motor directly coupled, power is 15kw (4 stages), speed reduction ratio is 43.

十六、安装使用 Installation and usage

1. 本机可用于24小时连续工作制并允许正反转。

2.单级减速机的输出轴与输入轴的转向相反，输出轴无自锁作用，在可能出现“倒转动”的场合下，应严格限制低速轴的轴速及转矩，以免发生机件损坏。

3.在输出轴与输入轴和其他零件连接时，不允许采用直接锤击的方法。当使用三角皮带轮传动时，三角带不宜涨得太紧，以免损坏轴承；当使用链轮传动时，链条不能放得太松，否则起动时产生冲击力。

4. 输出轴与输入轴轴伸的平键按普通平键型式尺寸(GB1096-79)规定选用，轴径尺寸公差为h6。

5.甲板式减速机要安装在没有振动，并且轴心线处于水平位置时。在必须倾斜使用时，轴心线的仰角不应超过15度。

6. 法兰式减速机安装时，输出轴必须垂直向下。

7.除甲板式与法兰式以外的其他安装形式必须采取相应的润滑，另外还要考虑工作的温度范围，具体情况请与我厂联系。

8.在冲击载荷较大，起动频繁工作时，机座与基础应自配定位销钉或选有液力联轴器安装。

1. The machine is available for continuous 24-hour work in a day; forward/reversed rotation is allowed.

2. To single-stage speed reducer, rotation direction of output spindle and rotation direction of input spindle shall be contrary, and no self -locking function on output spindle. In conditions when reversed rotation is likely to occur, please strictly limit rotation speed and torgue of low-speed spindle, in order to avoid damages on parts.

3. When coupling output spindle or input spindle, with other parts, hammering is not allowed. When triangle strap is used in transmission, the triangle strap shall not be too tightened, in order to avoid damages on bearing; when chain wheel is used in transmission, the chain wheel shall not be loosened extraordinary, otherwise, the impacting will be caused during start.

4. Sizes of flat keys on output spindle or input spindle shall be in accordance with standard (GB1096-79) for common flat keys, and axial size tolerance is h6.

5. Plate type speed reducers shall be installed in an area without vibration and its axes shall be horizontal. When users have to use it in an inclined manner, the angle between axes and horizon shall not be more than 15 degrees.

6. Output spindles shall downward vertically when flanged speed reducers are installed.

7. Except plate type and flange type installation patterns, to all other installation patterns, lubrication is needed, and working temperature range also shall be considered, please contact with our company for details

8. Locating pins, hydraulic shaft couplers are necessary for bases and foundations, when impacting load in great and starting is quite frequent

十七、润滑Lubrication

1.润滑方式Lubrication method:

单级 Single-stage			双级 Double-stage		说明：(1)油脂润滑时请采用二硫化钼1#或2L-2#锂基润滑油脂等(2)在常温下选用40#或50#机械油也可以选用更好的70#或90#极压工业齿轮油。Explanation:(1) Lubricating grease shall be molybdenum bisuifide1# or2L-2# Lithium base lubricating grease,etc(2) In normal temperature,40# or50# machine oil areavailable,and 70# or 90# industrial gear oil is better.
卧式Horizontal	×2	×(3-11)	×32-×42	×53-×117
卧式Horizontal	油脂Gresae	油浴式 Oil bath type	油脂 Grease	油浴式 Oil bath type
立式Vertical	×2-×4	×(5-11)	×32-×42	×53-×117
立式Vertical	油脂 Grease	油液循环	油脂 Grease	油泵循环

2. 本机在使用前必须注入润滑油，因为在出厂时为了便于装卸与运输一般不加润滑油，如是采用油脂润滑的出厂前已加好。

3. 油泵循环润滑方式，要注意开机前先启动油泵电机。视油泵是否供油。否则应将油泵电机接线换相，由于油泵是按指定方向运转的，还有油泵的过滤器要注意清洗以防堵塞。

4.换油制度：第一次加油运转一个月交换机油，并将内部油污冲净。以后可每隔3-6个月交换一次。如工作环境恶劣，尽可能缩短换油时间。如长期没有使用的减速机重新开机，必须先更换润滑油。

5. 卧式减速机油面高度尺寸如下：

2. Before starting, lubricating oil shall be added , for conveniences in loading and transportation during delivery, generally, lubricating oil is not added ,if lubricating grease is used, it will be added before delivery.

3. Oil pump cycling lubrication, start oil pump motor firstly before starting. Check whether oil pump supplies oil, if not, switch phases of oil pump motor, For the oil pump rotates in a specific direction, filter of oil pump shall be clean to avoid jamming.

4. Oil replacement rule: when oil is added for the first time, keep working for one month, and replace oil to clear off all oil dirt inside. From then, replace oil every 3-6 months. If the working conditions are extremely unfavorable, reduce oil replacement period as much as possible. Replace lubricating oil when restart a speed reduced having not been used for a long time.

5.Oil level of horizontal speed reducer: oil level.

机型号Type	×5	×6		×7	×8		×9	×10	×11
机型号Type	×53	×63	×64	×74	×84	×85	×95	×106	×117
油面高度 Oil high	150	190	190	210	240	240	275	315	410

十八、维护保养 Maintenance

一拆卸 Disassembly

1.拆卸前要先放净润滑油，立式减速机须先拆除油泵。拆装顺序见图。

2.拆卸钱首先松开联接螺栓，分解3、17，然后依次分解11、12、9、10、13等零件。

装配时则顺序相反。

3.对直联型进行分解时，严格按要求顺序进行，切禁先从电动机法兰处分解。

1.Drain lubricating oil completely before disassembly, to vertical speed reducers, disassemble oil pumps. Disassembly sequence is shown in the diagram.

2.Before disassembly, firstly loosen coupling bolts,then disassemble part 3,17,then part 11,12,9,10,13 etc, in sequence.Assembly is in the reversed sequence.

3.Disassembly of directly coupled speed reducers shall be strictly in accordance with required sequence, and it is forbidden to start disassembling from the flange area firstly.

二装配 Assembly

装配时请注意—下各项：During assembly, please pay attention to following :

1.装配前将全部零件清洗干净；

2.对滚动及滑动表面涂润滑油，以形成初步润滑条件；

3.两片摆线轮的标记、字头必须180度对称，并字头向上；

4.注意调整橡胶油封中弹簧的松紧，并涂抹油脂；

5.装配结束后装入润滑油或润滑脂，卧式油位达到高度，立式油位达到油标中线

6.用手转动高速轴，经检查无故障即可开空车运转。对立式减速机应检查油泵工作情况是否良好，若均正常方可使用。

1.Clean all parts completely before assembly

2.Smear lubricating oil onto rolling and sliding surfaces for primary lubrication;

3.Two C marks on cycloid wheel ,with head 180 degrees in symmetry and upright;

4.Adjust tightness of spring in rubber oil seal, and smear grease

5.After assembly, add lubricating oil or lubricating grease, to horizontal types, oil level shall reach the specific height, to vertical types, oil level shall in the middle of oil level scale

6.Rotate high-speed spindle by hands, check, when everything is all right ,users can start commissioning without load.

To vertical speed reducers, please check whether oil pump works normally, and start to use when everything is all right .

十九、配Y系列电机时联接法兰尺寸图表

电机接盘型

机型	电机			尺寸
机型	Kw	机座号	极数	NA	MA	PA	J	TA	n x S	XA	d	b	h
B09	0.18	Y63	4P	95	115	140	57.5	4	4xM 8	23	11	4	12.8
	0.25、0.37	Y71		110	130	160	74.5	4	4xM 8	30	14	5	16.3
	0.55	Y801		130	165	200	74.5	4	4xM 10	40	19	6	21.8
BOB10B20	0.18	Y63		95	115	140	54.5	4	4xM 8	23	11	4	12.8
	0.25、0.37	Y71		110	130	160	74.5	4	4xM 8	30	14	5	16.3
	0.55、0.75	Y80		130	165	200	74.5	4	4xM 10	40	19	6	21.8
	1.1	Y90S		130	165	200	83.5	4	4xM 10	50	24	8	27.3
B1B31B41	0.25、0.37	Y71		110	130	160	83.5	4	4xM 8	30	14	5	16.3
	0.55.0.75	Y80		130	165	200	83.5	4	4xM 10	40	19	6	21.8
	1.1、1.5	Y90		130	165	200	83.5	4	4xM 10	50	24	8	27.3
	2.2	Y100L1		180	215	250	90.5	4.5	4xM 12	60	28	8	31.3
B2B42B52	0.55、0.75	Y80		130	165	200	93.5	5	4xM 10	40	19	6	21.8
	1.1、1.5	Y90		130	165	200	93.5	5	4xM 10	50	24	8	27.3
	2.2、3	Y100L		180	215	250	93.5	5	4xM 12	60	28	8	31.3
	4	Y112M		180	215	250	93.5	5	4xM 12	60	28	8	31.3
B3B53B63	0.55、0.75	Y80	4P	130	165	200	118	5	4xM 10	40	19	6	21.8
	1.1、1.5	Y90		130	165	200	118	5	4xM 10	50	24	8	27.3
	2.2、3	Y100L		180	215	250	118	5	4xM 12	60	28	8	31.3
	4	Y112M		180	215	250	118	5	4xM 12	60	28	8	31.3
	5.5、7.5	Y132		230	265	300	118	5	4xM 12	80	38	10	41.3
	11	Y160M		250	300	350	151	5	4xM 16	110	42	12	45.3
B4B74B84	2.2、3	Y100L		180	215	250	125	5	4xM 12	60	28	8	31.3
	4	Y112M		180	215	250	125	5	4xM 12	60	28	8	31.3
	5.5、7.5	Y132		230	265	300	125	5	4xM 12	80	38	10	41.3
	11	Y160M		250	300	350	151	5	4xM 16	110	42	12	45.3
B5B85B95	2.2、3	Y100L		180	215	250	142	6	4xM 12	60	28	8	31.3
	4	Y112M		180	215	250	142	6	4xM 12	60	28	8	31.3
	5.5、7.5	Y132		230	265	300	142	6	4xM 12	80	38	10	41.3
	11、15	Y160M		250	300	350	142	6	4xM 16	110	42	12	45.3
	18.5	Y180M		250	300	350	142	6	4xM 16	110	48	14	51.8
B6	5.5、7.5	Y132		230	265	300	144	6	4xM 12	80	38	10	41.3
	11、15	Y160		250	300	350	144	6	4xM 16	110	42	12	45.3
	18.5、22	Y200L	6P	300	350	400	144	6	4xM 16	110	55	16	59.3
B7	11、15	Y160	4P	250	300	350	129	7	4xM 16	110	42	12	45.3
	18.5、22	Y200L		300	350	400	129	7	4xM 16	110	55	16	59.3
	30	Y225M		350	400	450	161	7	8xM 16	140	60	18	64.4
	37	Y250M		450	500	550	161	7	8xM 16	140	65	18	69.4
B8	18.5、22	Y200L		300	350	400	204	7	4xM 16	110	55	16	59.3
	30	Y225M		350	400	450	234	7	8xM 16	140	60	18	64.4
	37	Y250M		450	500	550	234	7	8xM 16	140	65	18	69.4
	45、55	Y280		450	500	550	234	7	8xM 16	140	75	20	79.9
B9	30	Y225M		350	400	450	236	7	8xM 16	140	60	18	64.4
	37	Y250M		450	500	550	236	7	8xM 16	140	65	18	69.4
	45、55	Y280		450	500	550	236	7	8xM 16	140	75	20	79.9
	75	Y315S		550	600	660	266	7	8xM 20	170	80	22	85.4

注：配置其他系列电机时尺寸可能有所变动

午马减速机

减（变）速机订货须知

1、主机名称：

2、减速机在主机中的作用\_\_\_

3、使用环境条件：温度\_\_\_\_摄氏度

4、每天运转时间

5、电机类型\_\_\_\_功率\_\_\_\_千瓦；电压\_\_\_\_伏特;输入转速\_\_\_\_转/分;频率\_\_\_\_赫兹

6、传动比\_\_\_\_;输出轴转速\_\_\_转/分

7、减速机所承受载荷（转矩）\_\_\_\_N.m

8、减速机型号规格（按型号表示示例填写)\_\_\_\_\_

9、减速机与电动机连接方式

10、所需台数\_\_\_\_\_，希望供货时间\_\_\_\_年\_\_\_\_月\_\_\_\_日

11、用户在订货时，双方需要签定全国同一格式文本合同，签定生效后，双方务必按《中华人民共和国合同法》中有关条款规定执行。

12、在签定合司前，必须详细阅读了解本书中的各产品性能，使用范围特点，各种机型的型号表示方法，包括机型号安装方式、是否带电机、减速比、电机功率、扭矩力等相关内容。直接配电机的产品，除注明电机功率外，还要务必注明机种类，相数（电机）极数（转数）如没有注明一律按三相四极交流电机出厂。

13、用户在订货时尽量选取我公司的型号、规格、如特殊减速比、变速比、特殊电机可特殊订货，我分司可为用户特殊设计制造。

14、本书所例的各项技术数据及其他，可供用户参考使用，如有技术改进，恕不另行通知。

注：a、选择带无级变速器的机型，为充分显示本机型的优良特性，常用转速应选择在变速范围中间值。

b、订货时请尽量选择本目录内的标准产品，如有特殊要求请在合同上详细说明。

Notices in speed reducer (speed changer)procurement

1、Main unit name:\_\_\_\_\_

2、Purpose of speed reducer in main unit

3、Operating conditions:Temperature\_\_\_℃

4、Working time every day\_\_\_\_\_\_\_\_\_

5、Motor type\_\_\_\_;Power\_\_\_\_KW; Voltage\_\_\_\_V;Input rotating speed\_\_\_\_r/min;Frequency\_\_\_\_HZ

6、Transmission ratio\_\_\_\_;Output spindle rotation speed\_\_\_\_r/min

7、Maximum(torque)load allowed on speed reducer\_\_\_\_N.m

8、Type of speed reducer (fill in types as specified)\_\_\_\_\_\_\_

9、Coupling method between speed reducer and motor\_

10、Quantity required\_\_\_\_\_.Expeced delivery date\_\_\_year\_\_\_\_month\_\_\_\_day.

11、When a user places an order,the two parties shall sign a national uniform-pattern contract,which comes into effect after being signed,and the two parties shall implement according to relevant provisions in Contract Law of the People's Republic of China.

12、Before signing a contract,please read all technical parameters,application range and expression of types,including installation patterns,motors attached or not,speed reduction ratio,motor power,torque and so on,To products directly coupled with motors, besides motor power,motor type,phase number(motor) and stage number (rotation number) shall be specified,otherwise,we will provide 3-phase& 4-stage AC motors for all.

13、Users shall try to select the types manufactured by our company,Special orders are available for special speed reduction ratio, transmisson ratio and motors,and our company can design and manufacture for users.

14、All technical parameters and other information in this document ate for users'reference ,and we will not otherwise when any technicalimprovements ate made.

Note: a. When selecting the machine model with stepless speed variator,in order to fully represent the escellent properties of this model of machine,generally,the rotary speed shall be the middle calue within the speed cariation range.

b. When ordering,please try to select the standard products in the catalogue. If there is any special requirement, please notify it in the contract

午马减速机

七、双级减速机型号规格及选型参考

午马减速机

午马减速机

十二、选用说明 Procurement guide

十三、工况系数表 Working coefficient table

十四、减速机用途和载荷性质分类参数表

十五、选择方式示例 Examples of selection

十六、安装使用 Installation and usage

十七、润滑Lubrication

5. 卧式减速机油面高度尺寸如下：

十八、维护保养 Maintenance

一拆卸 Disassembly

二 装配 Assembly

十九、配Y系列电机时联接法兰尺寸图表

午马减速机

减（变）速机订货须知

Notices in speed reducer (speed changer)procurement

备忘录

备忘录

快速跳转到指定页

二装配 Assembly