FT Series Coaxial Speaker
FT4 Cutaway view
MK Series Studio Monitor Speaker Series
INTRODUCTION:
MK series is a newly developed monitor speaker with builtin class AB dual-CHANNEL amp,two-in and two-out 24- bit DSP processor,with gain,crossover,equalization,delay, compressor,scene memory and other functions so that it can ensure the sound Dynamic requirements and great resolution. Specific models include: full-range speakers:MK5/MK6/MK8, ultra-low speaker: MK10SA.
| Model | MK5 | MK6 | MK8 |
| Frequency Response | 65Hz-20kHz (±3dB) | 50Hz-20kHz (±3dB) | 45Hz-20kHz (±3dB) |
| LF | FH0501H-1 | FH0601H-1 | FH0801H-1 |
| HF | FE2502G | FE2502G | FE2502G |
| Amp power rated | LF-50W | LF-60W | LF-90W |
| HF-25W | HF-30W | HF-45W | |
| Power Amp Distortion | 0.05% @ 1kHz | 0.05% @1kHz | 0.05% @ 1kHz |
| Input connector | Combo XLR + RCA | Combo XLR + RCA | Combo XLR + RCA |
| Input Sensitivity | OdBV | OdBV | 0dBV |
| Impedance | 10kΩ | 10kΩ | 10kΩ |
| Sensitivity | 87dB /1m | 88dB/1m | 88dB/1m |
| Max. SPL | 107dB(Pair) | 109dB(Pair) | 111dB(Pair) |
| Crossover | 2.2KHz | 2.2kHz | 1.9KHz |
| Power Supply | 220V 50Hz | 220V 50Hz | 220V 50Hz |
| Dimensions (WxHxD) | 208x321x217 mm | 235x372x255mm | 274x433x297mm |
| Weight | 7.2kg | 10kg | 14.5kg |
| Model MK10SA |
| Frequency response 35Hz-250Hz(±3dB) |
| Impedance 4Ω |
| Max. SPL 110dB |
| Unit 10"LF |
| Amp power rated 100W |
| Music Power 200W |
| Power AMP Distortion(T.H.D) 0.05% @1KHz |
| Connector 2*XLR IN + 2*XLR OUT |
| Input Sensitivity Line: +4dBU |
| Nominal Impedance 10KΩ |
| Power Supply 220V/50Hz |
| Dimensions (WxHxD) 342x433x385mm |
Introduction
As a new type of portable multifunction combo speakersystem,PAP1OD includes1pcs active speakercabinet,1pcs 1 0 " active cabinet with built-in removable8eiaeromneaseeradnietoffoaeofioalspekerch verysuitablefortheaplication inalon,winepartybandperformance,outdoordance,conferenceroomandotherues.
FEATURES:
> 1 0 " two-way combo speaker system features excellent tone and light weight.The constant directivity horn-loaded tweeter can be used as either FOH or stage monitor.
> Removable 8-channel digital mixer features easy use and excellent performance and adopts the 4th-generation 40bit SHARC floating point processor,24bit/192kHz ADC/DAC,8 builtineffects(reverb,delay,modulation and GEQ),8 LINE IN(6 Pro Mic and 1 Stereo),8 busses(1 Stereo output),4 assignable output and 2 USB interfaces(for recording,playback,scene storage and wireless access).
> High eficiency 2-channel “CLASS-D"amplifier(25oW) features large power, low distortion and excellent tone.
> Designed with switching power supply featuring light weight, stable performance and 1oo-240Vwide voltage input.
> Digital mixer offers USB2.0 dock forWIFl remote control by iPad or Android device
> Digital network interface supports PC connection for visual operation.
> 8 effect modules include 2 reverb,2 modulation,2 delay and 2 31-band GEQ to adjust tone flexibly and properly.
> Support USB recording/playback(wav).
> Designed with high quality NEUTRlK components and 6 x Combo XLR.
> Mixer features easy installation and co-use with special stand.
| Rated Power | 2*250W (THD:1%,4Ω load at 1kHz) |
| THD | ≤0.3%(1kHz) |
| Frequency Response | 20Hz--20kHz |
| Voltage | 100-240V/50-60Hz |
REAR
| Type | 10" two way active speaker cabinet system |
| Frequency response | 70Hz~20kHz(±3dB) 60Hz~20kHz(-10dB) |
| Sensitivity(1m/1W) | 94dB |
| Max SPL(@1m) | 122dB |
| Speaker cabinet | |
| Nominal Impedance | 4Ω |
| Power | 200Wx2 |
| LF speaker cabinet | 1X10" woofer/50mm voice coil/200W |
| HF driver | 1X34mm HFdr iver/34mm voice coil /30W |
| Coverage(H*V) | 90°x60° |
| Crossover | 2.5kHz |
| Connector | JACK |
| Speaker cabinet dimension (W*H*D) | 348x557×330(mm) |
| Speaker system net weight | 32kg |
8-channel Digital Mixers
supportwirelesscontrol viaiPador AndroidTablet andwiredaccess toaPC,andwill support iPhone and Android Phone in October, 2018 as expected.
1.MIC IN 8.Function Selection and LED
2. MIC Gain 9.Universal Knob
3. STEREO IN 10.PHONES
4. Output 11. Standby
5.Network 12. USB2.0
6.MAINS IN 13. Headphone Level Knob
7. Channel Selection and LED
Features
> PC/iPad/smartphone remote control
> Multiple control via wireless network and Ethernet,compatible with iOS,Android,
Windows,MacOSandLinuxdevice
> Input channel supports phantompower,4 band PEQ,high pass filter,compressor,effect
and noise gate
> Output channel supports reverb,delay and 8 built-in effects
> 2x USB(stereo recording/playback/system updates/scene storage)
> Input:6 Mic,1 Stereo,2 USB wireless Mic
> 8 Busses:1 Stereo output
> 4 assignable output
> High quality components: NEUTRIK
> 8 built-in effects
> Support scene memory
8-channel Digital Mixer
| CHANNEL | DESCRIPTION | |
| MIC IN | 6 | 6 Combo XLR |
| LINE IN | 1 Stereo | 2 Jack |
| Master Out | LR | 4 assignable output |
| Mono Busses | 4 | |
| Stereo Busses | 1 | |
| USB Interface | USB recording/playback(wav) | |
| AD/DA | Maximum 24Bit/192KHz | |
| Effect | 8 effect modules:2 reverb,2 modulation,2 delay and 2 31-band GEQ | |
| Network | Wifi External Module | |
| Power Supply | AC 90-240V50/60Hz | |
PAP12D/PAP15D Portable Combo Speaker System with Built-in 8-channel Digital Mixer
Introduction
This portable multifunction speaker combo includes two sets of speaker system -12inch(digital mixer ^ + passive speaker) and 15inch(professional power amplifier ^ + pasive speaker).Combiningspecialspeakerstand,youcanbuildasetof highperformanceprofessionalspeakersystemfeaturing perfect tone,light weight,easy operation and excellent performance.
Active Speaker System
1. High efficiency "Class * \mathsf { D } ^ { \prime \prime } amplifier,large power,low distortion,xcellenttone;
2.Dual channel design,perfect stereo efect,10o-24OV wide voltage input;
3.Power:2x 250W/4Ω;
4.XLR input,12V/4A power supplyand external passive speaker interface.
Passive Speaker System
1. Cabinet made of high intensity plastic materials;
2.Subwooferand tweeterdesignedwithferitemagneticcuit,ighensitiylowdistortion,largepower,highiciency;
3.3pcs handle for easy carry,light weight,elegant and attractive contour;
4. 4 5 ^ { \circ } trapezoid appearance design,can be used as stage monitor;
5.Support either pole mounting(35mm hole)or suspension(5pcs M10 suspension points)for instalation.
Applications
Very suitable for salon,wine partyband performance,outdoordance,conference roomand othervenues.
16-channel Digital Mixer
support wireless control via iPad or AndroidTabletandwiredaccesstoa PC,and will support iPhone and Android Phone in October,2018asexpected
1. MIC IN
2. MIC Gain
3. STEREO IN
4. Output
5.Network
6. MAINS IN
7. Channel Selection and LED
Features
> Speaker Cabinet with Built-in Mixer
> PC/iPad/smartphone remote control;
> Multiple control via wireless network and Ethernet, compatible with iOS,Android,Windows, Mac OS and Linux device;
> Input channel supports pre-amp electro-gain,phantom power,4 band PEQ,high pass filter, compressor, effect and noise gate;
> Output channel supports reverb,delay and 8 built-in effects;
> 2 x USB(stereo recording/playback/system updates/scene storage);
> Input: 12 Mic,2 Stereo;
> 6 Busses: 4 AUX,1Mix(L/R)
> 6 assignable XLR output;
> High quality components: NEUTRIK;
> 4 built-in effects;
> Support scene memory.
| MIC IN 12 | 8 XLR,4 Combo XLR | |
| stereo in | 2 | 4 Jack |
| Master Out | LR | 6 assignable XLR output |
| AUX | 4 | |
| USB Interface | USB recording/playback(wav) | |
| AD/DA | Maximum 24Bit/192KHz | |
| Effect | 4 effect modules: 2 reverb,2 delay | |
| Network | Wifi external module | |
| Power Supply | External12VDC(AC90-240V 50/60Hz)power adapter | |
Portable Combo Speaker System with Built-in 16-channel Digital Mixer
| Model | PAP12 | PAP15 |
| Type | 12"two-way active fullrange speaker | 15"two-way active fullrange speaker |
| Frequency Response | 50Hz--20kHz | 45Hz--20kHz |
| Sensitivity(1W@1m) | 96dB | 97dB |
| Impedance(Ω2) | 4Ω | 4Ω |
| Rated Power(RMS) | 200W | 200W |
| Maximum SPL(dB) | 126dB | 127dB |
| LF Unit | 12"subwoofer/50mm voice coil/200W/4Ω | 15"subwoofer/50mm voice coil/200W/4Ω |
| HF Unit | Φ34 compression driver/1"throat/30W | Φ34 compression driver/1"throat/30W |
| Coverage(V*H) | 90°x60° | 90°x60° |
| Crossover | 2.2 KHz | 2.4 KHz |
| Suspension | 5×M10 | 5×M10 |
| Dimension(W*H*D) | 390×630×360 (mm) | 450×710×370 (mm) |
18"active subwoofer
| Type | 18" Subwoofer |
| Frequency response(-10dB) | 35Hz~100Hz |
| Max SPL | 128dB |
| Crossover | 80Hz/100Hz |
| LF | 18"/100mm Voice Coil |
| Input connector | JACK/XLR |
| Input sensitivity | OdBu |
| Power | 750W |
| Dimension(WxHxD) | 568x627x710(mm) |
| Weight | 58.5kg |
INTRODUCTION:
PAP18SA,a subwoofer, can be used with PAP12 andPAP15 (full range) together as a set. It consists of a 18"cone loudspeaker and built-in power amplifier. Class H750W, L/R signal input and output. Signal link or main loudspeaker output can be selected via a switch. Crossvoer can be 1OoHz or 8OHz.The loudspeaker cabinet adopts 2 0 \mathsf {mm } HDF in slot structure to ensure pure,rich and transparent tone.35mm mounting hole for convenient application.
ActiveSpeaker
1.Highefficiency“Class-D”amplifier,largepower,lowdistortion, excellenttone;
2.Dualchanneldesign,perfectstereoeffect,0o-24oVwidevoltage input;
3.Power:2x250W/4Ω;
4.XLRinput,12V/4Apowersupplyandexternal passivespeaker interface.
AlternativesofPAP12D
| Item | Model | Quantity |
| Speaker | PAP12 | 2 |
| Stand | DB009B-1 | 2 |
| Cable | 1(10m length) |
| Item | Model | Quantity |
| Speaker | PAP12 | 2 |
| Subwoofer | PAP18SA | 1 |
| Stand | DB009B-1 | 2 |
| Instrument cable | 4(6m length) | |
| Speakercable | 1(10m length) |
| Item | Model | Quantity |
| Speaker | PAP12 | 2 |
| Subwoofer | PAP18SA | 2 |
| Stand | DB023-1 | 2 |
| Instrumentcable | 4(3pcs1.5m,1pcs10m) | |
| Speakercable | 1(10m length) |
AlternativesofPAP15D
| Item | Model | Quantity |
| Speaker | PAP15 | 2 |
| Stand | DB009B-1 | 2 |
| Cable | 1(10m length) |
| Item | Model | Quantity |
| Speaker | PAP12 | 2 |
| Subwoofer | PAP18SA | 1 |
| Stand | DB009B-1 | 2 |
| Instrument cable | 4(6m length) | |
| Speaker cable | 1(10m length) |
| Item | Model | Quantity |
| Speaker | PAP12 | 2 |
| Subwoofer | PAP18SA | 2 |
| Stand | DB023 | 2 |
| Instrument cable | 4(3pcs1.5m1csm | |
| Speaker cable | 1(10m length) |
PSM Series
Stereo Monitor Speaker System
Introduction
PSMO5R PSMo5S Monitor Speaker features compact design,MIC stand integration system for use with stand and boom,2x12oW Class-D amplifier and high quality speaker unit.MIC1/LINE is designed with INSTRUMENT switch function and effects. Internal MP3/USB/BLUETOOTH, USB recording/ folder read function(PSM05R only)
Applications: Suitable for band show or solo performance.
FEATURES:
> Internal 2x15oW Class-D amplifier and high quality speaker unit > 2CH MIC/LINE,1CHAUX IN,3-band EQ (PSMO5R is 2-band EQ) > MIC input has effects for option.
> MIC1/LINE input with internal INSTRUMENT function for signal optimization.
> 48V phantom power for use with condenser MIC.
> MAIN IN and THRU function for option.
> Wide power supply 100V-240V.
| Model | PSM05R | PSM05S | PSM05E |
| Type | 5" plastic monitor speaker | 5" plastic monitor speaker | 5"plastic monitor speaker |
| Frequency response | 60Hz -18kHz (-10dB) | 60Hz -18kHz (-10dB) | 60Hz -18kHz (-10dB) |
| 90Hz-13kHz (-3dB) | 90Hz -13kHz (-3dB) | 90Hz -13kHz (-3dB) | |
| Power | 60W(8Ω) 120W(4Ω2) | 60W(8Ω) 120W(4Ω) | 60W(8Ω2) 120W(4Ω2) |
| Max SPL(1m) | 115dB | 115dB | 115dB |
| Audio inputs | |||
| 3.5mm mini jacks | -10dBu to +4dBu | -10dBu to +4dBu | / |
| RCA jacks | -10dBu to +4dBu | -10dBu to +4dBu | / |
| XLR/TRS combo jacks | -40dBu to +4dBu | -40dBu to +4dBu | OdBu |
| Phantom power | +48V,switchable | +48V,switchable | / |
| powersupply | 100V-240V.50/60Hz | 100V-240V.50/60Hz | 100V-240V.50/60Hz |
| Equalizer | |||
| high | >12KHz ±15dB | >12KHz ±15dB | / |
| mid | 2.5kHz±15dB | / | / |
| low | 100Hz±15dB | 100Hz±15dB | |
| USB/BLUETOOTH/REC | Yes | No | No |
| Dimension(W*H*D) | 290*215*175(mm) | 290*215*175(mm) | 290*215*175(mm) |
| weight | 2.8kg | 2.8kg | 2kg |
PSM-R system
Bluetooth/USB/REC
PSM-R combination system includes PSM05R monitor speaker and PSM05 passive speaker,output power 2x120W/4Ω,BLUET00TH/USB/MP3 play function.
PSM-Ssystem
PSM-S combination system includes PSM05S monitor speaker and PSM05 passive speaker,output power 2x120W/4Ω,suitable for solo performance and stage monitor.
PSM-Esystem
PSM-E combination system includes PSM05E monitor speaker and PSM05 passive speaker,output power 2x120W/4Ω,suitable for stage monitor and use with other pre-amp..
PSM Series
Ultra-Compact 150-watt PA/Monitor Speaker System
Introduction
Multi-purpose,15O-Watt,active speaker for vocal and keyboard monitoring,multi-media,press conferencesand home recording studio, etc.
FEATURES:
>Revolutionary Class-Damplifier technology;
>Ultra-low noise 3-channel mixerwith 3-band EQ;
>Mic stand integration system for use with stand and boom; >Internal switch-mode power supply for noise-free audio, superior
>transient response and very low power consumption;
>Add the echo effect for optimizing the Mic input;
>Bluetooth for option;
>USB recording/Playing function;(only PSMO5R)
>USB record and select the files to play.(only PSMO5R)
| Model | PSM05A |
| Type | 5" plastic monitor speaker |
| Frequency response | 60Hz -18kHz (-10dB) |
| 90Hz-13kHz (-3dB) | |
| Power | 150W |
| Max SPL(1m) | 115dB |
| Audio inputs | |
| 3.5mm mini jacks | -10dBu to +4dBu |
| RCA jacks | -10dBu to +4dBu |
| XLR/TRS combo jacks | -40dBu to +4dBu |
| Phantom power | +48V,switchable |
| powersupply | 100V-240V,50/60Hz |
| Equalizer | |
| high | >12KHz ±15dB |
| mid | 2.5kHz±15dB |
| low | 100Hz±15dB |
| USB/BLUETOOTH/REC | / |
| Dimension(W*H*D) | 290*210*175 |
| weight | 2.8kg |
KG Series Recording Mixing Consoles
中 DSP ?SDUSB SD DSP RECORDING BLUETOOTH
Introduction:
New to the range for 2O16 are our KG range of compact,and portable mixing consoles. Offering all the features and specifications required from mixing consoles at this level,at a great price point.With features such as 3 band EQ,built-in channel compression,DSP effects and a hugely versatile MP3/USB/SD card playback and recording system.
Availablein5,6,8,10 or12inputmodels.The5inputwith1mic channel,the 6 input with 2 mic channels,the 8 has 4 mic channels, the 10 with 6 mic channels,and the 12 input model has 8.All feature 2 stereo input channels.
Input channels,are fully featured with 3 band EQ,2 Auxiliaries, balanced mic/line connectors,compressor control and a useful channel MUTE switch.Stereo channels differ only with 2 band EQ and no compressor.
Main outputs are balanced XLR,with additional jack outputs available forauxiliaries and control room,and RCA phono record/playback facilities.
The USB/SD card facility for stereo recording/playback make the ideal for project home recording or giving the ability to supply interval /backing music to your live performance.To add further practicality to the unit,there is a built in MP3 player to give you every opportunity to make your live performance as quick and easy to set-up as possible. Also included on both KG models is a high quality 16 programme DSP effects unit.
Inaddition to this,the KG models feature + 4 8 V phantom power on all mic channels,high quality 6omm smooth faders,and a robust quiet internal switchmode power supply.
Features:
>1-8 channel input models
{ > } 3 Band EQ on all mic channels
>High pass filters and adjustable compressors on all mic channels
>USB/SD card recording /playback
>Bluetooth playback facility
>High quality DSP effects
>Ultra compact and lightweight design
| Model | KG05 | KG06 | KG08 | KG10 | KG12 |
| Inputs | 5 | 6 | 8 | 10 | 12 |
| Mic Input channels | 1 | 2 | 4 | 6 | 8 |
| Stereo Input channels | 2 | 2 | 2 | 2 | 2 |
| Gain | MIN - MAX | MIN - MAX | MIN - MAX | MIN - MAX | MIN - MAX |
| Mic | +6dB-+50dB | +6dB-+50dB | +6dB-+50dB | +6dB-+50dB | +6dB-+50dB |
| Line | +10dB - -34dB | +10dB - -34dB | +10dB - -34dB | +10dB- -34dB | +10dB--34dB |
| EIN | -100dB | -100dB | -100dB | -100dB | -100dB |
| Frequency response | |||||
| Mic Channel | 10Hz - 20kHz +1/-3 | 10Hz - 20kHz +1/-3 | 10Hz - 20kHz +1/-3 | 10Hz - 20kHz +1/-3 | 10Hz - 20kHz +1/-3 |
| THD Mic Channel | ≤0.03% | ≤0.03% | ≤0.03% | ≤0.03% | ≤0.03% |
| Signal to noise ratio | 80dB | 80dB | 80dB | 80dB | 80dB |
| Output Levels | MAX +27(BAL) | MAX +27(BAL) | MAX +27(BAL) | MAX +27(BAL) | MAX +27(BAL) |
| MAX +22(UNBAL) | MAX +22(UNBAL) | MAX +22(UNBAL) | MAX +22(UNBAL) | MAX +22(UNBAL) | |
| Channel EQ | |||||
| Hi | 12kHz | 12KHz | 12kHz | 12kHz | 12KHz |
| Mid | 2.5kHz | 2.5kHz | 2.5kHz | 2.5KHz | 2.5kHz |
| Lo | 45Hz | 45Hz | 45Hz | 45Hz | 45Hz |
| Lo Cut | / | 80Hz | 80Hz | 80Hz | 80Hz |
| MP3/USB/SD Audio | YES | YES | YES | YES | YES |
| playback | |||||
| USB/SD Audio recording | YES | YES | YES | YES | YES |
| DSP Effects | NO | YES | YES | YES | YES |
| CEHO Effects | YES | NO | NO | NO | NO |
| Power requirements | 100V-240V | 100V-240V | 100V-240V | 100V- 240V | 100V - 240V~ |
| Dimensions (W x H x D) | 195x80x270(mm) | 227×70×359(mm) | 283x70x359(mm) | 339x70x359(mm) | 395x70x359(mm) |
> KG series portable compact mixeroffers all the features and specifications required from mixing consoles at this level,but ata much greater price point.It features 3-band EQ,built-in channel compression,DSP effects and versatile MP3/USB/SD card playback and recording system.
> Available in 5,6,8,10,12 and 16channel models.5-channel mixerhas 1 mic input; 6-channel onehas 2 mic inputs;8-channel one has 4 mic inputs;10-channel onehas 6 mic inputs;12-channel one has 8 mic inputs.All mixershave 2 stereo inputs.
> Input channel features 3-band EQ,2 aux inputs,balanced mic/line input, compressor control and a useful channel mute switch. Stereo channel differs with only 2-band EQ and without compressor.
> Main outputis balanced XLR,additional jack output available forauxiliaries,control roomand RCA recording/playbackfacilities.
> USB/SD card stereo recording/playback makesKG series ideal for home recording or providing insulation/background music for your live performance.To add further practicality to the unit, there isa built-in MP3playeravailable to facilitate your live performance.
> \mathsf { I n } addition,KG series features 16 kinds of high quality DSP effect units,phantom power supply for mic channel, high quality 6Omm smooth faders and switching mode power supply.
> { \mathsf { K G 1 6 } } has added the new functions below:
1).Each channel adds monitor switch and LED,the DJ can manually detect the sound effect of each channel.
2).DSP foot switch function.
3).AUX2 function.
Model
KG16
| Inputs | 16 |
| Mic Input channels | 12 |
| Stereo Input channels | 2 |
| Gain | MIN - MAX |
| Mic | +6dB-+50dB |
| Line | +10dB--34dB |
| EIN | -100dB |
| Frequency response | |
| Mic Channel | 10Hz - 20kHz +1/-3 |
| THD Mic Channel | ≤0.03% |
| Signal to noise ratio Output Levels | 80dB |
| MAX +27(BAL) MAX +22(UNBAL) | |
| Channel EQ | |
| Hi | 12kHz |
| Mid | 2.5kHz |
| Lo | 45Hz |
| Lo Cut | 80Hz |
| MP3/USB/SD Audio playback YES | |
| USB/SD Audio recording | YES |
| DSP Effects | YES |
| CEHO Effects | NO |
| Power requirements | 100V-240V~ |
| Dimensions (W x H x D) | 395x70x359(mm) |
The MIX-C compact mixing console range offer a versatile and cost effective solution.
Professional features such as 3-band swept EQ,4auxiliaries,high quality onboard DSP,4 subgroups and USB connections.A 9-band graphic EQ on the output and balanced XLR output connections make these comprehensive and feature packed mixing consoles suitable for many different applications.
Features
> 3 band with swept mid EQ on mic channels > 4 band EQ on stereo channels { > } 9 band graphic equaliser > Rackmountable model MIX08CG
| MODEL | MIX08CG | MIX08C | MIX12C | MIX16C | MIX20C |
| Mic Input | 6 | 6 | 10 | 14 | 18 |
| Stereo Input | 4 | 4 | 4 | 4 | 4 |
| Aux | 4 | 4 | 4 | 4 | 4 |
| Dsp | 100 programs | 100 programs | 100 programs | 100 programs | 100 programs |
| MONO | 1 | 1 | 1 | 1 | 1 |
| Stereo L/R Output | 2 | 2 | 2 | 2 | 2 |
| Group L/R Output | 4 | 4 | 4 | 4 | 4 |
| Gain | 70dB(MIC main output) | ||||
| MIC CH. EQ±15dB | HI: 12kHz, MID:800-8kHz(optional), LO:80Hz | ||||
| LINE CH. EQ±15dB | HI: 12KHz, HI MID:3KHz, LO MID:500Hz, LO:80Hz | ||||
| Frequency response | (20-20kHz)±1dB | ||||
| Equivalent input noise | -127(unweighted) | ||||
| Maximum Output Level | +28dBu | ||||
| Meter | 12segment(-30dB to 18dB) | ||||
| Distortion | ≤0.01%(20-20KHz) | ||||
| Lamp | / | ||||
| Weight (kg) | 5.5kg | 5.3kg | 7.2kg | 8.8kg | 10kg |
| Dimension(WxDxH)mm | 482x445x105 | 430x445x105 | 535x445x105 | 645x445x105 | 732x445x105 |
The MIX-CA compact mixing console range offer a versatile and cost effective solution.
Professional features such as 3-band swept EQ,4auxiliaries,high quality onboard DSP,4 subgroups and USB connections.A 9-band graphic EQ on the output and balanced XLR output connections make these comprehensive and feature packed mixing consoles suitable for many different applications.
Features
> 3 band with swept mid EQ on mic channels
> 4 band EQ on stereo channels
{ > } 9 band graphic equaliser
> Rackmountablemodel MIX08CGA
>2X 300W class D amplifier MIX08CGA MIX08CA MIX12CA MIX16CA
| MIX08CGA | MIX08CA | MIX12CA | MIX16CA | |
| Mic Input | 6 | 6 | 10 | 14 |
| Stereo AUX Input | 4 | 4 | 4 | 4 |
| Aux | 4 | 4 | 4 | 4 |
| DSP | 100 programs | 100 programs | 100 programs | 100 programs |
| MONO | / | 1 | / | |
| Stereo L/R Output | 2 | 2 | 2 | 2 |
| Group L/R Output | 4 | 4 | 4 | 4 |
| Gain | 70dB(MIC main output) | |||
| MIC CH. EQ±15dB | HI: 12kHz,MID:800-8KHz(optional),O:80Hz | |||
| LINE CH. EQ±15dB | HI: 12KHz, HI MID:3KHz, LO MID:50OHz, LO:80Hz | |||
| Frequency response | (20-20KHz)±1dB | |||
| Equivalent input noise | -127(unweighted) | |||
| Maximum Output Level | +28dBu | |||
| Meter | 12segment(-30dB to 18dB) | |||
| Distortion | ≤0.01%(20-20kHz) | |||
| Lamp | ||||
| Weight(kg) | 8.7kg | 8.5kg | 10.5kg | 12kg |
| Dimension(WxDxH)mm | 482x445x150 | 430x445x150 | 535x445x150 | 645x445x150 |
MIX02-1A REAR PANEL
MIX02A MIX02AUREAR PANEL
MIX04A MIX04AUREAR PANEL
Features:
> 2 / 4 Mic/line input,48V phantom power, used for condenser microphone. > 2way stereo line input
> 2 band EQ, + / . -15dB EQat 80Hz&12kHz
> Main output control (L/R)
> Headphone output control
> RCA input/output > 4band LED level indicator
> Compact external structure;be applicable for different locations; > Operation is friendly and easy;
> External power supply,(100-265V) can be used for any
> countries.
| Model | MIX02-1A | MIX02A | MIX02AU | MIX04A | MIX04AU |
| Mic Input | 2 | 2 | 2 | 4 | 4 |
| Stereo Input | 1 | 2 | 2 | 2 | 2 |
| Aux | / | 1 | 1 | 1 | 1 |
| Dsp | / | / | / | / | / |
| MONO | / | / | |||
| Stereo L/R Output | 1 | 2 | 2 | 2 | 2 |
| Group L/R Output | / | / | / | / | / |
| Gain | 65dB(MIC main output) | ||||
| MIC CH. EQ±15dB | HI: 12kHz, LO:80Hz | ||||
| LINE CH. EQ±15dB | HI: 12kHz, LO:80Hz | ||||
| Frequency response | (20-20kHz)±1dB | ||||
| Equivalent input noise | -103(unweighted) | ||||
| Maximum Output Level | +20dBu | ||||
| Meter | 4segment(-20dB to CLIP) | ||||
| Distortion | ≤0.08%(20-20kHz) | ||||
| Lamp | / | ||||
| Weight (kg) | 0.54kg | 0.78kg | 0.78kg | 0.98kg | 0.98kg |
| Dimension(W*D*H)mm | 190x140x68 | 220x160x68 | 220x160x68 | 220x220x68 | 220x220x68 |
Poweramplifier part:
AE414 features high efficiency class D power amplifier,4 Ohms speaker cabinet with reliable performance,2x5ooW output power, high efficiency,low distortion,high S/N ratio, wide dynamic,perfect protections (thermal/short circuit/DC protections).
| Model | AE414 |
| Frequency range | 790~870 MHz |
| Frequency stability | ±0.005% |
| Frequency response | 50~18 kHz |
| Receiving sentivity | > -95 dBm |
| Distortion | |
| Transmission power | 10mW |
| Input | 4 CH MIC,4 CH LINE,1 group of RCA,1 MP3,USB and SD card interface |
| Frequency response | 20~20 kHz |
| EQ | HF ±15dB±2dB (10kHz) |
| MF ±12dB±2dB (2kHz) | |
| LF ±15dB±2dB (50Hz) | |
| Sensitivity | MIC -45dBu±2dB |
| LINE -13.5dBu±2dB | |
| RCA -6.5dBu±2dB | |
| Mode | ClassD |
| Rated power | 2*500W4ohms stereo |
| Protection | short circuit/over load protection |
| Cooling | fan |
| S/N ratio | >70dB |
Wireless Part:
Wireless section includes 4 UHF receiving units and 4UHF transmitters which feature high S/N ratio, high anti-interference, wide dynamic,stable frequency.
Thereare 3 types of transmitters:handheld,bodypack and desktop for different applications.The handheld type can be used in live show or Karaoke.The bodypack type can be packed in the waist and picks-upat the collar,and the actor's hands are free to handle other things in the show.The desktop type can be used in the small conference.
This equipment is designed with 4 receiving units and 4 wireless microphones for application.
AE42BEM Introduction:
This product is the newversionof AE42BE.DSP/MP3player/USB/SD card/ remote control have beenadded to the product. Class AB 5oWx2 amplifier makes sound clear and full.Two passive loudspeakers can be linked to the mixer for perfect stereo effect.AE42BEM features compact enclosureand comprehensive function.The product is the combination of mixer,player and reinforcement system.
Features:
> compact but unique shape.
> comprehensive function(mixer,poweramplifier, MP3,SD card.
> multiple input connectors to connect the audio source.
> light weighted.
> solid structure.
| Mic Input | 4 |
| LINE Input | 4 |
| Aux | 1 |
| Dsp | 1(reverb) |
| MONITOR | / |
| Stereo L/R Output | |
| Power amp output(THD≤1%,RMS) | 2x50W(4ohm)class AB |
| Gain | 45dB(MIC main output) |
| MIC CH. EQ±15dB | HI: 10KHz, LO:100Hz |
| Frequency response | (20-20kHz)±3dB |
| S/N Ratio | 70dB |
| Maximum Output Level | 27dB |
| Meter | / |
| Distortion | ≤0.5%(20-20kHz) |
| Wireless | / |
| Weight (kg) | 9.2kg |
| Dimension(W×D×H)mm | 480x160×130 |
U AE42-A
0 AE42-B
Configuration:
AE42BEM 1pcs,KB12 2 pcs, handheld wireless microphone 2pcs, bodypack wireless microphone 2pcs.
Configurations forselection:
Configuration:
AE42BEM 1pcs, KJ12-1 2pcs, handheld wireless microphone 2pc, bodypack wireless microphone 2pcs;
DG Series
DigitalAmplifierwithDSP
Asthebradnwflagshipproduct,DGseriesdigitalpowermpifiersadoptmultiopregulatingtechniquefeaturinghghstandardteical specifications.The specially-designed amplification technology can realize 9 5 % efficiency and excellent stability even under low impedance and large cuentuidfiitdt harsh power grid environment and provides continuous power.
DGseriesigiediaid/ertedD enforce realtime monitoring via RS-485and LCDpanelandsupportreceiving analogandAES digitalaudio signal.
| Model | DG2300 | DG4200 | DG4150 | DG2200 | DG2150 | DG4100 | DG2100 | DG4065 | DG2065 | ||||
| Rated Power | 8Ω/Stere0 4Ω/Stereo | 2×3000W | 4×2000W | 4x1500W | 2×2000W | 2×1500W | 4×1000W | 2×1000W | 4×650W | 2×650W | |||
| 2×5100W | 4×3400W | 4×2550W | 2×3400W | 2×2550W | 4×1700W | 2×1700W | 4×1100W | 2×1100W | |||||
| *2Ω/Stereo | 2×7140W | 4×4760W | 4×4335W | 2×4760W | 2×4335W | 4×2890W | 2×2890W | 4×1870W | 2×1870W | ||||
| 16Ω/Bridge | 1×6000W | 2×4000W | 2×3000W | 1×4000W | 1×3000W | 2×2000W | 1×2000W | 2×1300W | 1x1300W | ||||
| 8Ω/Bridge | 1x10200W | 2×6800W | 2×5100W | 1x6800W | 1×5100W | 2×3400W | 1×3400W | 2×2200W | 1×2200W | ||||
| *4Ω/Bridge RMS Voltage | 1×14280W 2x11560W | 2×8670W | 1×11560W | 1×8670W | 2×5780W | 1×5780W | 2×3740W | 1×3740W | |||||
| (THD=1%,1KHz) Rise Slope(1kHz, | 154.9V | 126.5V | 109.5V | 126.5V | 109.5V 50V/us | 89.4V | 89.4V | 72.1V | 72.1V | ||||
| bypass low pass filter)IMD- SMPTE(10% rated | |||||||||||||
| output, typical value) | 0.01% | ||||||||||||
| DIM30(10% rated output, typical value) | 0.01% | ||||||||||||
| Crosstalk(under rated power, 20 Hz ~1 kHz) | ≥90 dB | ||||||||||||
| Frequency Response(10% rated output, 8Ω, 20Hz~20 kHz) | ±0.3dB | ||||||||||||
| Input Impedance Damping | 20kΩ(bal),10kΩ (unbal) | ||||||||||||
| (8Ω,20Hz~200Hz) | ≥5000 | ||||||||||||
| S/N Ratio(A-weighted, 20Hz~20kHz) | ≥115dB | ≥112dB | ≥110dB | ≥112dB | ≥110dB | ≥109dB | ≥109dB | ≥107dB | ≥107dB | ||||
| Power Supply | 90~260VAC,50~60Hz | ||||||||||||
| Protection Function | Undervoltage,amplifier direct current,over heat, temperature control,overload control | ||||||||||||
| Dimension | 483×44×465mm | ||||||||||||
| (W×H×D) N.W | 13kg | 483×44×370mm 9kg | |||||||||||
Introduction:
AQseries digital poweramplifier is suitable for demanding conference system,entertainment or small touring show. This series digital power amplifier features perfect protection, reliable performance,PFC and harmonic soft start switching mode power supply technology,90\~26ovAC universal voltage.
Function
> stereo/mono/bridge operationmodes;
> sensitivity1Vrms,gain 32dB,26dB for option > XLR input connector;
> professional speaker connector;
> output over load/short circuit protection;
> DC output protection;
> 70l power compression;
> thermal protection;
> Thermal indication;
Features:
> high efficiencyenergysaving;
> active PFC,power factor 0.99 > high output to drive 2 Ohm load stably;
> compact but solid structure;
> perfect protection;
> meet the requirement of production compliance and electromagnet compatibility.
> Variable speed fan for cooling;
| MODEL | AQ2150 | AQ2250 | AQ2350 | AQ2450 | ||
| Rated power(EIAJ | 8Ω/stereo | 2x150W | 2×250W | 2×350W | 2×450W | |
| 4Ω/stereo | 2×255W | 2×425W | 2×595W | 2×765W | ||
| *2Ω/stereo | 2×435W | 2×725W | 2×1015W | 2×1300W | ||
| 16Ω/bridged | 1×300W | 1×500W | 1×700W | 1×900W | ||
| 8Ω/ bridged | 1×510W | 1×850W | 1×1190W | 1×1530W | ||
| RMS output voltage(THD=1%,1KHz) | *4Ω/bridged | 1×870W | 1×1450W | 1×2030W | 1×2600W | |
| 34.6V | 44.7V | 52.9V | 60.0V | |||
| Slew rate( 1kHz, low-pass filter bypassed) | 50V/us | |||||
| Sensitivity(Rated Power,1kHz) | selectable35dB,32dB,29dB,26dB | |||||
| THD+N (10% rated output powerl) | 0.02% | 0.02% | 0.02% | 0.02% | ||
| IMD-SMPTE(10% rated output powerl) | 0.02% | 0.02% | 0.02% | 0.02% | ||
| DIM30(10%rated output powerl) | 0.02% | 0.02% 0.02% | 0.02% | |||
| Crosstalk rejectioniless than rated powerl 20 Hz -1 kHz) | ≥90dB | |||||
| Frequency response(10% rated output powerl] 8ΩI20Hz - 20 kHz) | ±0.2dB | |||||
| Input impedance | 20kΩ(bal) [10kΩ(unbal) | |||||
| Damping factor(8Ω20 Hz -100 Hz) | ≥300 | |||||
| S/N ratio (A weightedl20Hz-20kHz) | ≥105dB ≥104dB | ≥103dB | ≥100dB | |||
| Power supply | 90~260VACI 50~60 Hz | |||||
| protection | Protection:Under voltage,DC,Over temperature; Limiter:Over temperature,verload,Sort | |||||
| dimension(W×H×D) | 483×44×370mm | |||||
| Net weight | 9kg | |||||
| MODEL | AQ4150 | AQ4250 | AQ4350 | AQ4450 | ||
| Rated power(EIAJ | 8Ω/ stereo | 4×150W | 4×250W | 4×350W | 4×450W | |
| 4Ω/stereo | 4×255W | 4×425W | 4×595W | 4×765W | ||
| *2Ω/ stereo | 4×435W | 4×725W | 4×1015W | 4×1300W | ||
| 16Ω/bridged | 2×300W | 2×500W | 2×700W | 2×900W | ||
| 8Ω/ bridged | 2×510W | 2×850W | 2x1190W | 2×1530W | ||
| *4Ω/bridged | 2×870W | 2x1450W | 2×2030W | 2×2600W | ||
| RMS output voltage(THD=1%,1KHz) | 34.6V | 44.7V | 52.9V | 60.0V | ||
| Slew rate( 1kHz, low-passfilter bypassed) | 50V/us | |||||
| Sensitivity(Rated Power,1kHz) | selectable 35dB,32dB,29dB,26dB | |||||
| THD+N (10% rated output powerl) | 0.02% | 0.02% | 0.02% | 0.02% | ||
| IMD-SMPTE(10% rated output powerl) | 0.02% | 0.02% | 0.02% | 0.02% | ||
| DIM30(10%rated output poweri) | 0.02% | 0.02% | 0.02% | 0.02% | ||
| Crosstalk rejectioniless than rated powerl 20 Hz -1 kHz) | ≥90 dB | |||||
| Frequency response(10% rated output power) 8Ω120Hz - 20 kHz) | ±0.2dB | |||||
| Input impedance | 20kQ(bal) [10kΩ(unbal) | |||||
| Damping factor(8Ω[20 Hz -100 Hz) | ||||||
| S/N ratio (A weightedli20Hz-20kHz) | ≥300 ≥105dB ≥104dB | ≥103dB | ≥100dB | |||
| Power supply | 90~260VACl 50~60 Hz | |||||
| protection dimension(W×H×D) | Protection:Under voltage,DC,Over temperature; Limiter: Over temperature,Over load,Short | |||||
| Net weight | 483×44×370mm | |||||
| 9kg | ||||||
Introduction:
AG series digitalpoweramplifierisournew flagshipproduct which featuresmultipleadjustmenttechnology,over 9 5 % efficiency and stable function in thelowimpedadtictidffielsl AGserieshashaed4caelprouctseficencndrelbleperfoancandtheapacitytodriveaditabforline array system.
Features:
>high efficiency,energy saving;
>compact but solid structure;
>meet the requirement of production compliance and electromagnet compatibility.
>90VAC\~26OVAC universal power supply;
>premium components;
>variable speed fan for cooling;
> moduledesign forconvenientmaintenance;
^ { > 2 } channel and 4 channel design to suit for touring show;
>Reliable performance;
Function:
> stereo/parallel/bridgemodes;
>gain option:41dB38dBl35dB32dBl
> output limit switch;
>XLR balance input;
>Paralleled professional speaker connector provides high current operation; >Professional reliable 32A power socket
>Thermal protection and indication;
> Overload control offers continuous output;
{ \tt > D C } output protection
>low voltage protection;
>Limit/problem indication;
| MODEL | AG2300 | AG4200 | AG4150 | AG2200 | AG2150 | |
| Rated power(THD=1%, continuous sine 1kHzll each channel working | 8Ω/stereo | 2×3000W | 4×2000W | 4×1500W | 2×2000W | 2x1500W |
| 4Ω/stereo | 2×5100W | 4×3400W | 4×2550W | 2×3400W | 2×2550W | |
| *2Ω/stereo | 2×7140W | 4×4760W | 4×3570W | 2×4760W | 2×3570W | |
| 16Ω/bridge | 1×6000W | 2×4000W | 2×3000W | 1×4000W | 1×3000W | |
| 8Ω/bridge | 1x10200W | 2x6800W | 2×5100W | 1×6800W | 1×5100W | |
| *4Ω/bridge | 1×14280W | 2×9520W | 2×7140W | 1×9520W | 1×7140W | |
| RMS output voltage (THD=1%,1kHz) | 126.5V 109.5V 126.5V | |||||
| Slope(1kHz, bypass LPF) | 50V/us | |||||
| Sensitivity(Rated Power,1kHz) | selectable41dB,38dB, 35dB,32dB | |||||
| THD+N (10% rated output power) | 0.01% | |||||
| IMD-SMPTE(10% rated output power) | 0.01% | |||||
| DIM30(10% rated output power) Crosstalk rejection(less than rated | 0.01% | |||||
| powerl20 Hz ~1 KHz) | ≥90 dB | |||||
| Frequency response(10% rated output power8Ωl20Hz~20 kHz) | ±0.2dB | |||||
| Input impedance | 20kΩ(bal) [10kΩ2(unbal) | |||||
| Damping factori8Ql20Hz~200Hz) S/N ratio (A weightedi20Hz~20kHz) | ≥115dB | ≥300 | ||||
| ≥112dB | ≥110dB 90~260VACl50~60 Hz | ≥112dB | ≥110dB | |||
| Power supply | ||||||
| protection | Protection:Undervoltage,DC,Over temperature; Limiter:Over temperature,Overload,Sort. | |||||
| Dimension (W×H×D) Net weight | 483×44×465mm 12kg | 483×44×370mm 9kg | ||||
| MODEL | AG4100 | AG2100 | AG4065 | AG2065 | ||
| Rated power(THD=1%, continuous sine 1kHzll each channel working | 8Ω/stereo | 4×1000W | 2x10O0W | 4×650W | 2×650W | |
| 4Ω/stere0 | 4×1700W | 2x1700W | 4×1100W | 2×1100W | ||
| *2Ω/stereo | 4×2890W | 2×2890W | 4×1870W | 2x1870W | ||
| 16Ω/bridge | 2×2000W | 1×2000W | 2x1300W | 1×1300W | ||
| 8Ω/bridge | 2×3400W | 1×3400W | 2×2200W | 1×2200W | ||
| *4Ω/bridge | 2×5780W | 1×5780W | 2×3740W | 1×3740W | ||
| RMS output voltage (THD=1%,1KHz) | 89.4V | 89.4V | 72.1V | 72.1V | ||
| Slope(1kHz, bypass LPF) | 50V/us | |||||
| Sensitivity(Rated Power,1kHz) | selectable38dB,35dB,32dB,29dB | |||||
| THD+N (10% rated output power) | 0.01% | |||||
| IMD-SMPTE(10% rated output power) | 0.01% | |||||
| DIM30(10% rated output power) Crosstalk rejection(less than rated | 0.01% | |||||
| powerl20 Hz ~1 KHz) | ≥90dB | |||||
| Frequency response(10% rated output powerl8Ω[20Hz~20 kHz) | ±0.2dB | |||||
| Input impedance | 20kΩ(bal) [10kΩ2(unbal) ≥300 | |||||
| Damping factori8Ω[20Hz~200Hz) | ||||||
| S/N ratio (A weightedl20Hz~20kHz) | ≥109dB ≥109dB | |||||
| Power supply | 90~260VACl50~60 Hz | |||||
| protection | Protection:Under voltage,DC,Over temperature; Limiter: Over temperature,Over load,Short | |||||
| Dimension (W×H×D) | 483×44×370mm | |||||
| Net weight | 9kg | |||||
AK Series
Network intelligent power amplifier(DSP)
Introduction:
1.Power Supply
“AK"inteligntpopfiassntfuofoii edgetechol poweroftheintealresistanceisow.Ianprovideihcurentomentoadathtemegabasshavenouheergtoontrolpaperone The presentation of good strength.
2.Amplifying Circuit
“AK"inellitlounddprsseiudeoaldioeiot Poweramplfieinsidetereisaltiutomaticetectioofadimpedancecicuit.ontheladipedancesowertanteuctofe presetalueeilts notaffectsfbkle stability of the product,and doesn't affect the use of the load.
AK"intellgentpoweramplifieris noteasytooverheating protection;theeficiencyof the whole machinecan reach89 in8 \Omega conditions. So in normal useisnoteasytppeartheenomofatigprotectioIfetroentotereasosladtoapidtemperaturisfepoer ampifierpltaUfl ifthetemperaueosicllotosdartliimpureopdn temperaturetutomaicalleadodddtotiuAdittyodusialsB amplifier,and the efficiency of class D poweramplifier.
3.Complete Appliance
“AK"intelintofodopd controlciitoatiatleatitatefhrtftitebttato ofworkeacrtitedttti athaetinUtoiatfhlstiisefddtforatiototftocdifo mutualexchaneIossofoatiaeiatairtftittitilaillyke corresponding adjustment, make the product stability and reliability to improve on an unprecedented scale.
4.Built-in high-performance DSP processor
“AK"intelliii coerter;eab srpesercdlalt andlimiteldi RJ45 interface;Channel Copy function, convenient debugging and so on many merits.
| Model | AKT700 | AKT1000 | AKT1600 | AKT2400 |
| Number of input channels | 2 | 2 | 2 | 2 |
| Number of output channels | 2 | 2 | 2 | 2 |
| RMS. Output Power(EIA (AC230V) | ||||
| 8 ohms ch. | 700W | 1000W | 1600W | 2400W |
| 4 ohms ch. | 1200W | 1700W | 2700W | 3800W |
| 2 ohms ch. | 1200W | 1700W | 2700W | 3800W |
| 8 ohms bridged | 2000W | 2800W | 4600W | 6200W |
| 4 ohms bridged | 2000W | 2800W | 4600W | 6200W |
| Special function | ||||
| Built-in DSP processor | YES | YES | YES | YES |
| The matrix of input signal | NO | NO | NO | NO |
| PC Monitor | YES | YES | YES | YES |
| Standby system | YES | YES | YES | YES |
| Dimensions /Weight | ||||
| Dimensions (W/H/D) | 483 mm*88(U)*440mmDepthcontainshandle and therearsupport) | |||
| Weight | 14kg | 14kg | 14.5kg | 15kg |
| Appearance | Black paintedsteelchassis withblackpaintedsteel/aluminumfront | |||
| Model | AKF700 | AKF1000 | AKF1600 | |
| Number of input channels | 4 | 4 | 4 | |
| Number of output channels | 4 | 4 | ||
| RMS.Output Power(EIA (AC230V) | ||||
| 8 ohms ch. | 700W | 1000W | ||
| 4 ohms ch. | 1200W | 1700W | 1600W 2600W | |
| 2 ohms ch. | 1200W | 1700W | ||
| 8 ohms bridged | 2000W | 2800W | 2600W 4200W | |
| 4 ohms bridged | 2000W | 2800W | 4200W | |
| Special function | ||||
| Built-in DSP processor | YES | YES | ||
| The matrix of input signal | YES | YES | ||
| PC Monitor | YES | YES | ||
| Dimensions (W/H/D)(2U) | ||||
| Weight | 483 mm*88 mm *475 mm 16kg | 16kg | 18kg | |
| Overall Efficiency & Input Characteristics | ||||
| OverallEfciency (8ohms) | 89% | |||
| Inputs Sensivty | 0~20dB | |||
| Inputs Impedance | 30KOHM(balanced, stereo)15KOHM (unbalanced, parall) | |||
| Frequency response | 20-20000Hz(±0.3dB) | |||
| Slew rate | >30V/us | |||
| Damping factor | 200-1000tunableness) | |||
| S/N(A weighted) | >100dB | |||
| Audio Performance | ||||
| THD+N 20Hz-20KHz for 1W | ||||
| THD+Nat1KHzand1dBbelowciping | ||||
| Frequency response (1Winto 8ohms,20Hz-20KHz) | ±0.3dB | |||
| Common Mode Rejection(CMR) 20 Hz~1 KHZ | >78dB | |||
| Internal sample rate | 96KHz | |||
| Internal data path | 32bit foating point | |||
| Sample Rate Converters | ||||
| THD + Noise | 0.003%,20Hz- 20KHz,unweighted | |||
| Analog to Digital inputs THD + Noise | 0.022 %,typical at1kHz unweighted at +26dBu headroom setting | |||
Features:
> Voltage and current display on front panel > Voltage convert switch to convert 23OV or 24OV on rear panel.When 230V isselected,the input voltage fluctuation range is 18o-26oV,and output voltage is 23oV.When 24OV is selected,the input voltage fluctuation range is 190V-27OV,and the output voltage is 24OV.If the input voltage is over 275V, the regulator goes to protection status and shuts off output.
b. Over current protection: If the overall output current is over 30A, it shuts down the outputs c.Low voltage alarm: If the input AC voltage is lower than 180V,the orange LED on the front panel lights up.
> Advanced power surge protection
> Line filtering with ultra-low noise
> 1 0 output connectors,six 1oA connectors (one group 4 and one group 2) on the rear panel.
> The total load current is 30A
> Protection:
a. Over voltage protection: if the input voltage is over 275V,it shuts down the outputs
| Model | EP11 | EP12 |
| Max current | 30A | 16A |
| Regulated voltage | 180~250VAC/50Hz | 180~250VAC/50Hz |
| Over voltage Protectoin | 275±3VAC | 275±3VAC |
| Power consumption | 17W(idle) | 17W (idle) |
| Dimension | 482.6x597x133.5mm | 482 x 400 x 88mm |
| Weight | 26kg | 15kg |
AL1200
Features:
> Heatsink and variable speed fan for cooling
> Loop transformer to offer suffcient power supply
> Perfectcontour;standard rackmounting holes
> Limit/soft start/DC/short circuit/thermal protection
> Built-in limiter to prevent speaker from damage
> Prominent tone,signal conversion,extremely low THD/SMPTGE-IM/transient modulation
distortion
> Stereo/parallel/bridgemode
> Signal /clip LED for each channel
> Gain control on front panel
> SMD components for reliable performance
> Transistor connected with heatsink for cooling
| MODEL | AL400 | AL700 | AL1200 | AL1600 | AL2000 |
| Output Power 8Ω | 2x200W | 2x350W | 2x700W | 2x800W | 2x1000W |
| Output Power 4Ω | 2x300W | 2x450W | 2x990W | 2x1250W | 2x1350W |
| Bridge Output power 8Ω | 600W | 900W | 2×1980W | 2550W | 2700W |
| Input Sensitivity | 0.775V/1.4V | ||||
| Frequency response(@1W) | (20Hz-20KHz)±1dB | ||||
| S/N ratio (A weighted) | >100dB | ||||
| THD(rated output power) | |||||
| Crosstalk A-weighted) | |||||
| Damp Factor(1kHz 8Ω) | >200 | ≥70dB >200 | >200 | >200 | |
| Protection | Audio Limiters,High Temperature,DC,Short Circuit,HF,Peak Current Limiters,Turn-on Delay | ||||
| Power Requirements | 110~120@220~240AC 50/60Hz | ||||
| Weight | 13kg | 14.5kg | 15g | 15.8kg | 18.5kg |
| 482x353x88 | 482x353x88 | 482x353x88 | 482x353x88 | 482x403x88 | |
INTRODUCTION
AD series features compact contour,perfect tone,excellent performance, unique circuit, high load capacity and perfect protection,including DC/input limit/over-load output/short-circuit/thermal/power surge/soft-start protection and limit/compression to ensure the reliable performance.
FEATURES
> 2U/3U height,compact contour; > Class AB&H circuit > Professional protection
> Dual side PCB and SMD to improve the stability; > Variable speed fan for cooling; > Stereo/parallel/bridge mode > Light weight for easy transportation
APPLICATION
Entertainment venue,stadium, touring show, theater, cinema,etc;
| MODEL | AD600 | AD900 | AD1500 | AD2200 | AD3000 | AD4000 |
| Stereo power 8Ω | 2x200W | 2x300W | 2x500W | 2x700W | 2x1050W | 2x1200W |
| Stereo power 4Ω | 2x300W | 2x450W | 2x750W | 2x1100W | 2x1500W | 2x2000W |
| Bridge power 8Ω | 600W | 900W | 1500W | 2200W | 3000W | 4000W |
| Frequency response(@1W) | 20Hz-20kHz ±0.5dB | |||||
| THD(rated output power) | ≤0.05% | ≤0.05% | ≤0.05% | ≤0.05% | ≤0.05% | ≤0.05% |
| Damping factor (1kHz 8Ω) | ≥200 | ≥300 | ≥300 | ≥300 | ≥300 | ≥300 |
| S/N ratio (A weighted) | ≥100dB | ≥100dB | ≥100dB | ≥100dB | ≥100dB | ≥100dB |
| Input sensitivity | OdBu | 0dBu | 0dBu | OdBu | OdBu | OdBu |
| Crosstalk (A weighted) | ≤70dB | ≤70dB | ≤70dB | ≤70dB | ≤70dB | ≥70dB |
| Protection | Limit/thermal/DC/shortcircuit/delay start protection | |||||
| Voltage | AC230V/50Hz | |||||
| Dimension (W×D×H)mm | 483x320x88.8 | 483x320x88.8 | 483x320x88.8 | 483x380x88.8 | 483x495x133.3 | 483x495x133.3 |
| Weight | 14kg | 16kg | 17kg | 21.5kg | 31kg | 38kg |
Introduction
AE series is the latest Soundking amplifiers,compact & solid design, refined components,perfect tone,excellent performance,unique circuit, power load to meet various professional requirement. Protection circuit ensures safety and reliability.This series include AE9oO,AE15OO,AE2200 and AE3o0o.Output power covers the range from 90oW to 3000W.
Features
>Standard 2U/3U height, compact and solid appearance;
>Class H circuit,low temperature, high efficiency,stable performance; >Professional protection: DC protection,short circuit protection, thermal protection,over load protection, CLIP/LIMIT protection
>Variable speed fan for cooling,low noise;
>Stereo,mono,bridge mode for selection;
>Low weight,convenient for installation and transportation
Applications
Mainly used in large/medium sized application,e.g.stadium,dancing hall, cinema,etc;
| MODEL | AE900 | AE1500 | AE2200 | AE3000 | AE4000 |
| Output Power 8Ω | 2x300W | 2x500W | 2x700W | 2x1000W | 2x1200W |
| Output Power 4Ω | 2x450W | 2x750W | 2x1100W | 2x1500W | 2x2000W |
| Bridge Output power 8Ω | 900W | 1500W | 2200W | 3000W | 4000W |
| Input Sensitivity | 1.4V/32dB/26dB | ||||
| Frequency Response | (20Hz-20kHz)±0.5dB | ||||
| S/N Ratio(A-weighted) | 100dB | ||||
| THD at rated output power | |||||
| Crosstalk (A-weighted) | ≥70dB | ||||
| Damp Factor(1kHz 8Ω) | >300 | >300 | >300 | >300 | >300 |
| Protection | AudioLimiters,Highmperature,DCShortCircuit,Heak CurrentLimiters,umoelay | ||||
| Power Requirements | 110~120@220~240AC 50/60Hz | ||||
| Weight | 16kg | 17kg | 21.5kg | 31kg | 38kg |
| Dimension(WxD×H)mm | 483x320x88 | 483x320x88 | 483x380x88 | 483x380x133.3 | 483x495x133.3 |
Introduction:
AP24/AP36/AP48 features CH/3CH/4CHbalanced input,4CH/6CH/8CHbalancedoutput,24bit48kHzsamplingrate,∑-lAD/DA converterandbitDSPchip.Iputsectionincludes8procesingunits-gainmute,noisegate,ghcut,lowcut,8EQaedelay; outputsectionideoceinnitseQinute,liitaeelayfratriistribtiit andoutputs;rossovegainandbandwidthofallQadjustable,type:peak,igselving,owshelving;typeofallhigoctfiter andcrossoverueorthnkwitiyel;dOcttodOcto;datiarttidcoerl limiter/compreorcontinuouslyajustable;tresold,starttimendrecoverytimeofallnoisegatecontinuouslyadjustable;imum 682msdelaytimeforalldelaymodule,O2imsstep;freecopingofparametersbetweennychannels;built-insignalgeneratorwith32 presets;PC software controlvia USB or RS232;remote timing cascade control overas manyas 256 units via RS485.
AP24/AP36/AP48
Features:
> 2 x 4 digital matrix processor,2CH bal input,4CH bal output; 3 x 6 digital matrix processor, 3CH bal input, 6CH bal output;
4 × 8 digital matrix processor, 4CH bal input,8CH bal output;
24bit 48kHz sampling rate,∑-lAD/DA converter,32bit DSP chip; > Input section includes 8 processing units - gain,mute, noise gate, high cut,low cut,8 PEQ,phase,delay;
> Output section includes 7 processing units - crossover,5 PEQ, gain,mute,limit,phase,delay;
> Free matrix distribution between all inputs and outputs;
> Crossover, gain and band width of all PEQ adjustable,type: peak, high shelving,low shelving;
> Type of all high/low cut filterand crossover: Butterworth,LinkwitzRiley, Bessel,-6dB/Oct to -48dB/Oct slope,20Hz\~20kHz frequencies continuously adjustable;
> Threshold,ratio,start time and recovery time of allimiter/
compressor continuously adjustable;
> Threshold,start time and recovery time of all noise gate
continuously adjustable; > Maximum 682ms delay time for all delay module;
> Free copying of parameters between any channels;
> Built-in signal generator, pink/white noise output mode,20Hz to 20kHz sine wave adjustable,signal amplitude adjustable;
> 2 x 2 0 LCD screen,custom buttons with lamp,one button operation, easy and fast;
> 3 2 user presets,each preset saved or called alone,password protection supported;
> { \mathsf { P C } } software remote control via USB or RS232;
>Cascade control over as many as 256 units via RS485,remote network control by center control system supported.
| AP24 | AP36 | AP48 | |
| Input | 2x XLR bal | 3x XLR bal | 4x XLR bal |
| Output | 4x XLR bal | 6x XLR bal | 8x XLR bal |
| Impedance | 1MQ/stereo input, 50oKΩ/mono input | ||
| Max input level | +12dBu | ||
| CMRR | >50dB (30Hz~20kHz) | ||
| Output | |||
| Impedance | |||
| Max input level | +12dBu | ||
| Frequency response | 20Hz~20kHz,±0.5dB | ||
| THD | >110dBu | ||
| Distortion | |||
| Max delay | 668ms | ||
| Output gain | -60dB~+12dB ±0.5dB | ||
| Input gain | -60dB~+12dB ±0.5dB | ||
| PEQ | 5 IN, 70UT | ||
| Filter | |||
| Gain | ±12dB in 0.5dB steps | ||
| Center frequency | 20Hz~20kHz | ||
| Q value | 0.4~128 | ||
| Shelving filter frequency response | |||
| Lo-shelf | 19.7Hz~1kHz | ||
| Hi-shelf | 1KHz~20.6kHz | ||
| Shelf gain | ± 12dB in 0.5dB steps | ||
| HPF&LPF | |||
| Filter | |||
| Frequency (high pass) | |||
| Frequency (low pass) | |||
| Response curve | 35Hz~22.0kHz Butterworth 6dBI12dB018dBl24dB | ||
| Linkwitz-Riley 12dBl18dBl24dB | Bessel 6dBl12dBl18dBl24dB | ||
| Limiter | |||
| Threshold (level) -90~+12dB | |||
| 1~200ms | |||
| Rise time | 1~1000ms | ||
| Fall time | 90V-260VAC 50HZ | ||
| Power supply | |||
Features:
> 32bit DSP chip,96kHz sampling rate,24bit AD/DA converter;
> Input sectionincludes highcut,lowcut,EQ,noisegate,gain,mute,pase,linkage,olumegroupndotherprocessinguits; > Outputsectionincludesrossver,PEQ,gain,mute,limit,pase,delaylinkage,volumegroupandotherprocessngits;
> Gain,bandihdeecyofaotiouslusabletypQlelvingfieelnfiut cutfilter, first order phase shift,second order phase shift;
> Free matrix distribution between allinputs and outputs, name of all channels changeable;
> All input&output channels with independent phase curve adjustment, 1 8 0 ^ { \circ } / 3 6 0 ^ { \circ } curve adjustment respectively for first/second order phase shift when it comes to PEQ type;
> Type of all high/low cutfilter and crossover: Butterworth,Linkwitz-Riley, Bessel; slope adjustable;
> Threshold,startidrecoveryimofseatecotiuuslyjustableforinputchanel;esoldatiotarttdery time of compressor/limiter continuously adjustable for output channel;
> Maximum 68Oms delay time for each delay module of all output channels;
> Free copying of parameters and linkage adjustable between any channels;
> PEQ curve graph for all current input/output channels visible from any single input/output channel;
> Built-in signal generator,pink/white noiseoutputmode,2OHzto 2OkHzsinewaveadjustable,signalamplitudeadjustable;
> Input&outputleiatodtattel,&dtettidst wireless PC mixing supported;
> 2 1 userpresets,whole stateandeach presetsavedorcalled alone.IDsetting enablescascadecontroloveras manyas 256 units, password protection function for great security.
| System specification | Frequency response |
| Dynamic range | |
| Distortion | |
| Crosstalk | |
| CMRR | |
| Input | Type |
| Max input level | |
| Impedance | |
| Output | Type |
| Max output level | |
| Impedance | |
| Digital Processing | 24bit sigma-delta AD/DA converter |
| 32 bit DSP, 48kHz sampling rate | |
| Display | Lattice LCD to show current parameters and all the other settings |
| Power Supply | AC 95V-250V50/60Hz |
| Dimension | 482*205*44mm |
| Weight | 2.88kg |
DP24/DP6isecieinoutinoutiaoroceoitotteqemetsofdddgeafor mostsuitabledioprocessigndfieldotrolisprocesorcdesaogiutsdaalogutputsoefulndit/ DAconvertercendrotecstaie adjustabledelayEachoutputprovidesmaimum7-bandQwhoseslopecanreachashighas4B/ctEachoutputcanselectpakcopo RMS limiterand delay.Inadition,output channel1 and output channel 3areequipped with dynamic loudnessfiter.
| DF24 | |
| Analog input/output | 2xXLR bal/4x XLR bal |
| Min load | 150 ohm |
| THD+N | 0.001% at 1kHz OdBu |
| S/N | >106dBA |
| Frequency response | 20Hz - 20kHz; ±0.5Bu at 20Hz and 20kHz |
| DSP | M704,24x32bitfilter processng,54bitaccumulator register,96bit precision intermediate data calculation |
| PEQ | 11-band EQ input; 7-band EQ output |
| Filter gain | -15dBu~+15dBu, step: 0.5dBu |
| Input&output gain | Input: -12dB~+12dB,step: 0.1dBu |
| Output: -18dB~+12dB, step: 0.1dBu 1Hz per step adjustment within 20Hz~20kHz | |
| Center frequency | |
| Q value/broadband | 0.4~128 |
| High/low pass filter | Butterworth slope: 6/12/18/24/36/48dB per octave |
| Bessel slope: 12/24dB per octave | |
| Linkwitz-Riley slope: 12/24/36/48dB per octave | |
| Noise gate | Threshold: -90dBu~-60dBu; control start time:1ms~1,000ms; release time:10ms~100ms |
| RMS limiter | Threshold: -14dBu~+16dBu, bypass adjustable ratio: 2:1~32:1; knee: 0~100% |
| Fil:-12dBu~+12dBu; control start time: 5ms~200ms; release time: 0.1s~3s | |
| Peak compressor | Threshold: -14dBu~+16dBu |
| Delay | Control start time: 5ms~200ms; release time: 0.1s~3s Max 900ms delay for each input; max 340ms delayfor each output,10.4us per step |
| Analog input/output | DP26 2 x XLR bal/ 6 x XLR bal |
| Min load | 150 ohm |
| THD+N | 0.001% at 1kHz OdBu |
| S/N | >106dBA |
| Frequency response | 20Hz - 20kHz;±0.5Bu at 20Hz and 20kHz |
| M704,24x32bitflterprocessing,54bitaccumulator register,96bit precision intermediate data calculation | |
| DSP | |
| PEQ | 11-band EQ input; 7-band EQ output Max 900ms delay for each input; max 34Oms delay for each output |
| Filtergain | -12dBu~+12dBu, step: 0.5dBu |
| Input&output gain | Input: -12dB~+12dB, step: 0.1dBu |
| Output: -18dB~+12dB,step: 0.1dBu | |
| Center frequency | 1Hz per step adjustment within 20Hz~20kHz 0.4~128 |
| Q value/broadband | |
| High/low pass filter | Butterworth slope: 6/12/18/24dB per octave/Bessel slope: 12/18/24dB per octave |
| Linkwitz-Riley slope:12/24/36/48dB per octave | |
| Noise gate | Threshold: -90dBu~-60dBu; control start time: 1ms~1,000ms; release time: 10ms~1,000ms |
| RMS limiter | Threshold: -14dBu~+16dBu; bypass adjustable ratio: 2:1~32:1; knee: 0~100% |
| Peak compressor | Fill: -12dBu~+12dBu; control start time: 5ms~200ms; release time: 0.1s~3s Threshold: -14dBu~+16dBu |
| Control start time: 5ms~200ms; release time: 0.1s~3s | |
| Delay | Max 900ms delay for each input; max 340ms delay for each output |
DP44isaidiutoteatoediitteato 1clipanditsprocods4biertertatfaturesaguttertdaloguteul6 DSPmanagesaalogututandcannsHproessTisproceorsupportsfretfullmatrixiingmodes:1)iputn mix output channel at any ratio;2) each output channel can mix other output channel at any ratio.
DP48isoii analogoutputareprocessdbytowerfulesidesthigprfomance4bitDcoerteachanelaturesbdQ gaincontrol,iteandustabledelayEchputprovidesaim7bandQoeoeangesfroBOctavtoctae Eachoutputcanselectpeak compressorandadjustabledelay.Inadition,highand low passfilterisalsoavailable.
DP44
| Analog input | 24 x XLR bal |
| Analog output | 4 x XLR bal |
| Min load | 150 ohm |
| THD+N | 0.001% at 1kHz OdBu |
| S/N | >110dBA |
| Frequency response | 20Hz - 20kHz;-0.5dBu at 20Hz and 20kHz |
| AD/DA converter | 1×AK538824bit,2×AK439624bit-96kHz |
| DSP | M716,24x32bit filter processing,54bitaccumulator register,96bit precision intermediate data calculation |
| PEQ | 13-band EQ input; 11-band EQ output |
| Filter type | Each equalising filter can be setas Bell,Shelving, high/low pass, band pass, notch or all pass filter |
| Filter gain | -15dBu~+15dBu, step: 0.5dBu |
| Center frequency | 1Hz per step adjusting within 2OHz~20kHz |
| Q value/band width | Bellfite:0.428,step:0;Selvingowpassier:05.1step:00;bndpasslpass/nochfiter:40te:00 |
| High/low pass filter | Buterworthslope:/1/18/24/36/48dBperoctave;Bselsope:1/24dBperoctave;Linkwitz-Rileysope:12/24/36/48dBperoctave |
| RMS limiter | Threshold: 20dBu~-10dBu; adjustable ratio: 2:1~32:1; knee: 0~100% |
| Delay | Fill: -12dBu~+12dBu; control start time: 5ms~200ms; release time: 0.1s~3s 400ms,step: 21us |
| Analog input | 4 x XLR bal |
| Analog output | 8 x XLR bal |
| Min load | 150 ohm |
| THD+N | 0.001% at 1kHz OdBu |
| S/N | >110dBA |
| Frequency response | 20Hz - 20kHz;-0.5dBu at 20Hz and 20kHz |
| AD/DA converter | CS42528 24bit-48kHz |
| DSP | M716,24x32bit filter processing, 96bit precision intermediate data calculation |
| PEQ | 30 filters for input; 7 filters for output |
| Filter type | Bell,high/lowShelving, high/low pass,band pass, notch orallpassfiteras optional |
| Filter gain | -15dBu~+15dBu,step:0.5dBu |
| Input&output gain | -18dB~+12dB,step: 0.1dBu |
| Center frequency | 1Hz per step adjusting within 2OHz~20KHz |
| Q value/band width | Shelving/high/low pass filter: 0.1~5.1; Bellfilter: 0.4~128 |
| Band pass/all pass/notch fiter: 4~104 | |
| High/low pass filter | Butterworthslope:6/12/18/24dBperoctave; Besselslope:12/24/48dBperoctave;Linkwitz-Rileyslope:1/24/48dBperoctave |
| Noise gate | Threshold: -80dBu~-50dBu; control start time:1ms~1,000ms;release time:10ms~1,000ms |
| RMS limiter | Threshold: -14dBu~+16dBu; bypass adjustable ratio: 2:1~32:1; knee: 0~100%; fil: -12dBu~+12dBu; control starttime:5ms~200ms;release time:0.1s~3s |
| Peak compressor | Threshold: -14dBu~+16dBu; bypass control start time:1ms~900ms; release time: 0.1s~5s |
| Input/output channel polarity | Positive (0°)/negative (180°)as optional |
| Input/output channel muting | ON/OFF |
| Delay | Max 420.998ms delay for each input; max 128.998ms delay for each output |
DP88upports4aystoealizeremoteontroandetokonfiguratioPCtosingleacineoctaCviaUSBealifullotoiaC software;Ctaotifultaareallroucul controlviaPfwreoctwallotroliaiipliwallotrolfeotollfft machine,includingeditingnduploadingpresetstothemachine.8haelscanalsupprtlineoricinndditributetoutputsvia 8 ^ { \star } 8 matrix.
DP88
| Analog input | 8 bal |
| Analog output | 8bal |
| Max input level | line:+18dBu; mic:-18dBu |
| Max output level | +18dBu |
| THD+N | 0.005% at 1kHz 0dBu |
| S/N | >104dBu |
| Frequency response | 20Hz - 20kHz±1dBu |
| AD/DA converter | 4×AK5385B 24bitI1×AK4358 24bit |
| DSP | Dream SAM3716,24x32bit filter processing,96bit precision intermediate data calculation |
| Input EQ | Each input channel has 3 Bell or Shelving filters |
| Output EQ | Each output channel has 5 Bell or Shelving filters |
| Filter type | Symmetric Bellor high/low Shelving to the second level command |
| Filter gain | Bell or Shelving gain: ±12dBu, step: 0.5dBu |
| Center frequency | 1/24th octave resolution per step within ±20Hz |
| Q value/band width | Q/BW range: 0.4/3.59~10/0.0312; Q/BW step: 0.1 res |
| High/low pas filter | Thefirst level command (Butterworth -6dB/Oct)tothe fourth levelcommand (Butterworth,Linkwitz-RileyorBesel-24dB/Oct |
| RMS limiter | Threshold: 18dBu~-12dBu |
| Test time: 5ms~200ms (1ms res~20ms; 10ms res~100ms; 20ms~200ms) | |
| Release time: 0.1s~3s (0.1s res) | |
| Ratio:1:1 (shoot through)~32:1 (hard limiting),step: 0.1 | |
| Delay | Max 380.998ms delay for each output, step: 21us |
| Feedback activation | Only available when selecting mic in |
| Default parameter | 6 user call; 4 S1-S4 digital input |
| Front panel | 2x24 LCD screen |
| Each input has 6 indicators (line/mic/feedback/signal/clip/limit) | |
| 1 phantom power indicator | |
| 6 key switch potentiometer can control and edit each channel alone | |
| Type B USB connector | |
| Rear panel | 2 x 12pin Phoenix connector (mic/line in) |
| 2 x 12pin Phoenix connector (line out) | |
| 2 x 4pin Phoenix connector (S1-S4 digital input, level:0-5V) | |
| 2 x 4pin Phoenix connector (S1-S4 digital output, level:0-5V) | |
| 2 x RJ45-RS485 input/output seat | |
| 1xRJ45- Internet seat (10/100 TCP-IP) | |
| AC supply | IEC C1316A,power socket:rockerswitch |
| 90-240VAC (50/60Hz)- 40W | |
| Dimension | 482x44x229mm,1U |
| Net/gross weight | 3.5/4kg |
SEQ-1502
SEQ-3102
SEQ-3103
Introduction:
The role of equalizer in a sound processing system can not be underestimated.Different environmentwill definitelyaffect the performance of a sound processing system.It is recommended that a equalizer should be equipped in your system.SOUNDKING products SEQ-3103 is your optimal choice. SEQ-3103 and SEQ-3102 are dual 31 segment graphic equalizer according to 1 { S } 0 ~ 1 / 3 otc for its 20Hz-20kHz frequency,SEQ-1502 is a dual 15 segment graphic equalizer according to ISO 1/3 otc for its 20Hz-20kHz frequency.
Features
> Stable performance.
> The excellency of ratio performance is well recognized in domestic and overseas market.
> Compact and convenient.
> CE& ETL certificated for safety.
> Transformer balanced output.
Application
Theater, disco,studio,concert, stage show,etc.
| MODEL Central Frequency(Hz) | Low Cut Filter | Range (Optional) | ||
| SEQ-1502 | 25,40,63,100,160,250,400,630,1k,1.6k,2.5k,4k,6.3k,10k,16k,(Hz) | 40Hz built in jumper (-12 dB/oct) | ±6dB/±15dB (switchable) | Weight |
| SEQ-3102 | 20,25,31.5,40,50,63,80,100,125,160,200,250,315,400,500,630, 800,1k,1.25k,1.6k,2k,2.5k,3.15k, 4k, 5k,6.3k,8k,10k,12.5k,16k,20k(Hz) | 40Hz (-12 dB/oct) | ±6dB/±15dB(switchable) | 2.5kg 3kg |
| SEQ-3103 | 20,25,31.5,40,50,63,80,100,125,160,200,250,315,400,500,630,800, 1k, 1.25k,1.6k,2k,2.5k,3.15k, 4k,5k,6.3k,8k,10k,12.5k,16k,20k(Hz) | 12Hz-285Hz (-12 dB/oct) | ±6dB/±15dB(switchable) | 4.0kg |
| MODEL ConnectorPower | Consumption Dimension | |||
| SEQ-1502 | XLR bal L/R, TRS 1/4" bal input L/R, XLR bal output L/R, TRS 1/4" bal output L/R | 17W-(AC100~240V,50~60Hz) | 433x183x44mm | |
| SEQ-3102 | XLR bal L/R, TRS 1/4" bal input L/R, XLR bal output L/R, TRS 1/4" bal output L/R | 17W (AC100~240V, 50~60Hz) | 433x183x88mm | |
| SEQ-3103 | XLR bal L/R,TRS 1/4" bal input L/R, XLR bal output L/R,TRS 1/4"bal output L/R | 17W (AC100~240V,50~60Hz) | 433x183x132mm | |
Introduction
PS30powerceoptsdustratrodleocatisiustrafrostey ilters offer pure power supply.
Features
> 3 0 \mathsf { A } industrial input connector
> Multifunction power socket
> One key to turn on the sequence function
> Turn on in turn and turn off conversely
> Each channel turns on/off independently
> Input voltage display
> Network control port
> 3U height for rack mounting
> 1 0 channel outputs; channel status display on the front panel;
| Model | SPS30 |
| Rated output current | 30A |
| Max current out per CH | 20A and 13A |
| Power supply control | 10 channel |
| Delay | 2 seconds |
| Dimension | 133x483x360(mm) |
| Weight | 11kg |
Introduction
SPSFpoweretstoarscholyiduoffleeyIias voltageandreduces instantcurrntsurge tosecuretheappliances1Ounitsatmostcanbeconnectedandoperated together. Application: Stereo appliance,computer,TV, broadcast system,etc..
SPS6-U (European application)
Introduction
SPS6-U power sequenceradopts SCM control,starts each power supply in turns and turns off power supply conversely. It has digital display to indicate voltage and reduces instant current surge to secure the appliances 6 units at most can be connected and operated together. Offer12V/1.2W lighting
Features
prevent the electrical facilities from the current surge in the circuit loop.
Application:
Applyto stereo,ComputerTV, Broadcast system or other electrical facilities which need sequence power driven system.
| SPS10F | 15A | 10 way | 1 second | 2×1.2W |
| SPS6-U | 16A | 6way | 1 second | 2×1.2W |
AZ-8F
Introduction
This power sequencer features CMsmart control,turingoneach channelpower inorderand turningoffreverselyone by oneto reduce the transient power surge damage to the equipment,compact contourand reasonable topology (GZ-8F 2U,GZ12F3U),built-inpremiumfiltertoreducetheinterference,mulifunctionpowersocket,digi-displayof thevoltage.Tepower sequencercompatiblewithTMSsystemhastiming,tele-control,auto-controlfunctions.The tele-controluses Etheretstructure and supports TCP Server,TCP Client operation modes.
Features
Applications
touring show,PC/TV/PA system,etc.
> Multifunction power socket;
> One button to turn on the sequence function;
> Turn on in order and off reversely;
> Each channel can be turned on/off independently;
> GZ-8F provides 8 channel power outputs
GZ-12F provides 12 channel power outputs,channel ;status displayed on the panel; > Input voltage display;
> Network control connector; turning on/off via the TMS;
> GZ-8F 2U,GZ-12F 3U
| Model | AZ-8F | AZ-12F |
| Power supply | AC 220V/50Hz | AC 220V/50Hz |
| Total out current | 30A | 30A |
| Each CH out current | 13A | 13A |
| Power control | 8CH | 12 CH |
| Delay time | 2s | 2s |
| Dimension DxWxH | 88×483×260(mm) | 132×483×260(mm) |
| Weight | 6.5kg | 7.8kg |
PWB69isdgielsfereg.tsstsfUCithesfuldsteactio convenient and easy operation for the applications in medium/smal meeting.
FEATURES:
> 2 . 4 G H Z universal ISM frequency band meets CCC,CE,ROHS,FCC standard
> Smart power supply: when the master power supply is turned off, the other slave devices turn off automatically.
> Four channels can speak simultaneously (master and slaves). Unlimited number of slaves
> Conference mode:1st in 1st out and apply for speaking
> Dual way transmission; recording output connector
> Battery detection function: when the battery is low,the LED lights up. > ADFHSS technology; system encoded for confidentiality;
> Digital frequency shift technology;strong capacity to prevent from feedback; round and stable tone;
| Systemconfiguration | Model | QTY |
| Flat panel speaker cabinet (active) | P6U | 1pcs |
| Flatpanel speaker cabinet (passive) | P6 | 1pcs |
| Master | WDM69C | 1pcs |
| Slave | WDM69D | 9pcs |
| Speaker cable | / | 1pcs |
| Remote control | / | 1pcs |
| Standard Al case | / | 1pcs |
| Charger | CD69 | 1pcs |
FEATURES:
1.2.4GHz universal ISM frequency band meets CCC,CE,ROHS,FCC standard
2.Smart power supply: when the master power supply is turned off,the other slave devices turn off automatically.
3.Four channels can speak simultaneously (master and slaves). Unlimited number of slaves
4. Conference mode:1st in 1st out and apply for speaking
5.Dual way transmission; recording output connector
6. Battery detection function: when the battery is low, the LED lights up. 7.ADFHSS technology;system encoded for confidentiality;
8.Digital frequency shift technology; strong capacity to prevent from feedback; round and stable tone;
The advantage of digital transmission:
1.Strong capability to prevent from interference;encoded signal transmission for confidentiality; low noise;two times frequency of the analog device;high S/N ratio;
2.Digital shift technology; Strong capability to prevent from feedback; round and stable sound;automatically adjusting the gain; better receiver dynamic;
3. Not interfered by mobile phone or router.
4. Universal 2.4GHZ frequency without law limitation unlimited number of slaves; Batteries feed the device up to 10 hours continuously. One week standby time;
| Model | WDM69 |
| Carrier frequency band) | 2.4GHz (2400-2830MHz) |
| Frequency response | 20Hz-50kHz |
| Extend frequency mode | ADFHSS |
| Audio delay | ≤15MS |
| Receiving sensitivity | -85dBu |
| S/N ratio | ≥110dB |
| Dynamic range | ≥ 110dB |
| Distortion | ≤0.6% |
| Max out level | OdB(p6.3 JACK OUT);3dB(XLR OUT) |
| Operation distance | 25-30 m( indoors) |
| Master/slave power supply | 3.7V/1000mAHlithium battery |
| Battery | 10h |
| Master power supply | DC-12V/1A |
WDM69
Standard Set List:
Host:WDM69M×1
Chairman:WDM69C×1
Extension:WDM69Dx9
Aluminum-alloy Cabinet x 1
Charger:CD69x1
PLL UHF Wireless receiver Two Channel Wireless Micophone System
FEATURES:
1.Built-in2\*1/4antennadstribute internetandphantompowersignaloutput,modularityautomaticsignalselectionrceiver.
2.Receiver and transmitter adopt industrial level TFTcolorful OLED display screen.
3.Aluminum-alloy housing elaborate mechanical processing and surface treatment.
4.Shuttle button with menu operation setting
5.Real-time accurate battery display and under voltage warming willdisplay on the receiver and transmitter
6.AdoptsordasstopFprocsngndndFmpontichineadtestFperfomancetobeceltadsured
the RF link to be reliable.
7.Eight numbers pilot frequency ID code .
SYSTEM:
Operation range:5Om line of sight
AF response:50 Hz - 15 kHz
T.H.D:<1% (@AF 1 KHz,RF 46 dBu)
Dynamic range:>100 dB A-weighted
Signal to Noise: { > } 9 0 dB
operation temperature:- * 1 0 ^ { \circ } \mathsf { C } (14°F) to + 6 0 ^ { \circ } \mathsf { C } (+140°F)
Pilot frequency:32.768KHz
Transmitter(Bodypack):
Transmitter(Bodypack):Mini-XLR
Input:1MΩ
Input impedance:38 dB
RF output power :10 mW EIRP
Battery:Two AA (LR6)alkaline batteries
Operation time:15 hours
Handheld Transmitter
Output Gain Range: 28 dB
RF output power:10 mW EIRP
Battery:Two AA (LR6)alkaline batteries
Operation time:10 hours
Receiver
AF output level:Unbalanced+14dBu/Balanced
+9dBu
AF ouput impendance: Unbalanced810 Ohms/
Balanced 240 Ohms
Imagine rejection:-100 dBm/30 dB sinad
Operation Voltage:15V
W95R/THHandheld Microphone
FEATURES:
1. UHF dual channel true diversity,infrared frequency matching and pilot function(easy operation, no crosstalk);
2.Adjustable working distance(both receiver and transmitter designed with distance control key);
3.Noise free HiFi transmission circuit for clear sound and true reproduction; 4.300 channels for option,as many as 1Oo sets for combo use at one place, perfect for KTV;
5. Receiver designed with multiple squelch control circuit to prevent external interfering signal;
6.Switching surge protection forsafety use of post-amp and speaker;
7.Effective working distance(unblocked):≥200m. distributors receiver the signal forma pair of antenna.
> Built-in high frequency amplifier device without consumption during operation. > The distributor can supply power for 4 set receiver and A pair of antenna amplifier by BNC connector.
> Antenna amplifier is compensate for the consumption of antenna cable length. > The power supply of W1ooo,microphone receiver and amplifier all combine using one power adapter.
> Combine two set W1ooo can just using one pair of antenna together.
> One 19'flight case can mount 1set W1000
Technical specification:
Connector :BNC
Impedance :50Ω
Power supply:10-15V,75mA
Receiver mode (3dB wave width) 70angle
Three layer overload intercept point(OIP3):>30dBm
Antenna gain :7.5dBi
Signal gain ±1dB switchable +10dBi,OdBi
W89R/THBODYPACKMICROPHONE
FEATURES:
UHFtruediveittieiingsicuperogevbitreableefoaedempleditios,te screnwithvoluedsplaothfrceiverandicaaSEfuctioneyicudinganue,lokunockfraedfreqcyatcgd pilot(noise free),high-end and elegant double layermetal panel.
Traditioaligoar application in school,all kinds of venue,etc;
Elegantrgocdfoablasidtaoerihddta muting,removable tail tubeandconcealed batterycompartment,easy frequencyadjustingand lock/unlockoperation;
Both receiver and mic designed with lock function to avoid mistake operation;
Effective working distance(unblocked) 2 1 5 0 m




