FW Series For Mobile Outdoor Performance
| Model | FW208 | FW212 | FW215 |
| Type | 2-way passive speaker | 2-way passive speaker | 2-way passive speaker |
| LF | FH0804H(8"+1") | FB1207H(12") | FB1507H(15") |
| HF | / | FE010(1.7") | FE025(3") |
| Frequency response | 90Hz~15kHz(-10dB) | 90Hz~15kHz(-10dB) | 80Hz~18kHz(-10dB) |
| Sensitivity(1W@1m) | 95dB | 102dB | 104dB |
| Nominal Impedance | 8Ω | 8Ω | 8Ω |
| Power handling | 120W (continuous), 48ow (peak) | 250W (continuous),100ow (peak) | 350W (continuous),140ow (peak) |
| Max. SPL | 122dB | 132dB | 135dB |
| Coverage(HxV) | 60°x60° | 45°x 45° | 45x 45° |
| Dimension(HxWxD) | 325x325x345(mm) | 450x450x670(mm) | 535x535x765(mm) |
| Net Weight | 15kg | 27.5kg | 32.5kg |
| Gross Weight | 17.5kg | 35kg | 40kg |
FW Series ForMobile Outdoor Performance
INTRODUCTION:
The FW12 long throw horn loaded speaker was specially designed for gymnasium.It consists of a 1 2 " woofer and two 44 mm high compression driver.The horn is same with the D series line array loudspeakerwith the constant directivity and dual high compression drivers for higher inteligibility.
FEATURES:
>Light-weight cabinet,waterproof
>Power-Output with high sensitivity
> Coverage with fardistance
>Professional flying seting with safety and reliability,easy to
install
APPLICATIONS: Gymnasium, Stadium, Club Auditorium, Small Venue.
FW12
Model
| Type | 2-way 12"long distance horn loaded speaker |
| Frequency response | 200Hz~16kHz(±3dB) |
| 140Hz~20kHz(-10dB) | |
| Sensitivity (1w@1m) | 106dB |
| Power handling | 300W (continuous),120ow (peak) |
| Nominal impedance | 8Ω |
| Horn Coverage(H*V) | 50°x25° |
| Crossover | 2.2kHz |
| LF | 1x12" paper cone woofer |
| HF | 2x44mm HF compression driver (1" exit) |
| Max. SPL | 137dB |
| Dimension(W x H x D) | 617x707x700mm |
| Net Weight | 34kg |
FHE Series Pro Active & Passive Speakers
Instruction:
FHEseriesfcabsettialeifofidstalatoforendurnotmsofabissf model,especially the high power dual 15"and dual 1 2 " models,for specific application environment and audio reinforcement requirement.
Features:
>ThemagnetcofigurationofwofergreatlyducesdistortionWindingvoicecolincreasestesurfaceofvoicecoilandeatdipation >High sensitivity,power and efficiency
>Tweeter with 3 " and1.74"voicecoil,hornwithconstantdirectivityationalpowerdesign,ensure eleganttoneandsuffcientpowermargin. >Water proof paint and grille with waterproof structure for the applications in various weather
>Fourteen M1O screws for hanging,standard pole mounting,quick set up,multi-angle hanging
>wheels of dual 1 2 " and dual 1 5 " cabinet for easy moving
Applications:
Thisseriesfbfsioul stadium,concert, outdoor show,meeting,etc.
Cutaway view
| Mouer | IILTUUA |
| Type | 18"active subwoofer 35Hz~100Hz(-10dB) |
| Frequency response | 128dB |
| Max SPL | |
| Crossover | 80Hz/100Hz |
| LF | 18"/100mm Voice Coil JACK / XLR |
| Input connector Input sensitivity | OdBu |
| Power amp rated | 750W |
| Dimension(WxHxD) | 568x627x710(mm) |
| Weight | 58.5kg |
L signal input connector ② L signal link output connector \otimes L high pass signal output connector 4 R signal input connector ⑤ R signal link output connector ® R high pass signal output connector 0 Volume 8 Ground/float switch 0 Fan 1 Power switch 1 Fuse 12 Power socket ? Low pass signal crossover switch 14 Sub LF phase switch 15 Power/signal/peak indicato
Cutaway view
FHE8
FHE10
FHE12
FHE15
Cutaway view
| Model | FHE8 | FHE10 | FHE12 | FHE15 |
| Type | 2-way8" Passive Speaker | 2-way 10" Passive Speaker | 2-way 12" Passive Speaker | 2-way15" Passive Speaker |
| Frequency response | 60Hz~20kHz(-10dB) | 55Hz~20kHz(-10dB) | 50Hz~20KHz(-10dB) | 45Hz~20kHz(-10dB) |
| Max. SPL | 120dB | 125dB | 128dB | 130dB |
| Sensitivity(1W@1m) | 92dB | 95dB | 97dB | 98dB |
| Nominal Impedance | 8Ω | 8Ω | 8Ω | 8Ω |
| Power handling | 150W (continuous),60ow (peak) | 250W (continuous),100ow (peak) | 300W (continuous),120oW (peak) | 400W (continuous),160ow (peak) |
| Coverage(HxV) | 90°x40°(Rotatable) | 90°x60°(Rotatable) | 90°x60°(Rotatable) | 90°x60°(Rotatable) |
| Crossover Freq | 2.5kHz | 2.5kHz | 2.1kHz | 2.0kHz |
| LF | 8"MF/LF/50mm Voice Coil | 10"MF/LF/65mm Voice Coil | 12"MF/LF/75mm Voice Coil | 15"MF/LF/75mm Voice Coil |
| HF | Ti diaphragm / 44mm Voice Coil | PK diaphragm /44mm Voice Coil | PK diaphragm /44mm Voice Coil | Ti /PEN diaphragm /75mm Voice Coil |
| Dimension(WxHxD) | 300x514x330(mm) | 340x578x357(mm) | 390x660x409(mm) | 424x740x437(mm) |
| Gross Weight | 14kg | 16.5kg | 21kg | 31kg |
| Model | FHE212 | FHE215 | FHE18S |
| Type | 2-way2x12"Passive Speaker | 2-way2x15" Passive Speaker | 18" Passive sunbwoofer |
| Frequency response | 50Hz~20kHz(-10dB) | 45Hz~20kHz(-10dB) | 31Hz~200Hz(-10dB) |
| Max. SPL | 133dB | 135dB | 133dB |
| Sensivty(1W@1m) | 99dB | 100 dB | 98dB |
| Nominal Impedance | 4Ω | 4Ω | 8Ω |
| Power handling | 650W (continuous),260ow (peak) | 800W (continuous),320ow (peak) | 700W (continuous),2800w (peak) |
| Coverage(Hxv) | 90°x60°(Rotatable) | 90°x60°(Rotatable) | / |
| Crossover Freq | 2.2kHz | 2.2KHz | / |
| LF | 12"MF/LF/75mmVoice Coil | 15"MF/LF/75mm Voice Coil | 18"MF/LF/100mm Voice Coil |
| HF | Ti /PEN diaphragm/75mm Voice Coil | Ti/PEN diaphragm/75mm Voice Coil | / |
| Dimension(WxHxD) | 405x989x445(mm) | 450x1153x508(mm) | 568x627×710(mm) |
| Gross Weight | 31kg | 45kg | 46.5kg |
K Series Engineering Speaker Series
EXCELLENT QUALITYSPEAKER OFTHE YEAR2008 CERTIFICATEBYCETA
Inthe“Excelent Quality Speakerof the Year 2OO8 Selection”hold onFebruary,2OO8by China Entertainment TechnologyAssociation,experts evaluate Soundking speakeras"beautifuland softtone,betterbalance;a types of musical instrumentssound natural and true,withbeterrestoringability.Treble bright,structuredand effective, high definitionand in electro-acoustical performance aspect,K212hassmooth impedancecurve,high sensitivity and low distortion."
K212 isone memberof the Soundking"K"series family,with Soundking engineers'tremendous efforts,andafter careful comparison,K212and K215 werechosenas therepresentative toparticipation in this grand event.With innumerable test in the sound reinforcement projects,its success has proved the excellent qualityof K series speakers.
Instruction:
K series speaker is specially designed for projects application. With a wide range of specifications,and optimized configuration, this series may adapt many kinds of sound reinforcement projects.
Features:
With good appeal,compact,and convenient to install and pack; high power and stability;beautiful and soft tone,better balance;all types of musical instruments sound natural and true,with better
restoringability;treble bright,structured and effective,high definition,K seriesspeaker is optimal forall sound reinforcement projects.
Applications:
Kseries speaker can bewidely applied for large-scale theater, live performance,stadium,mobile performance and all other sound reinforcement projects.
K2215
| Type | 2x12"2-way fullrange speaker | 2x15" 2-way full range speaker |
| Frequency response | 50Hz~18kHz(-10dB) | 45Hz~18kHz(-10dB) |
| Sensitivity(1W@1m) | 99dB | 100dB |
| Nominal Impedance | 4Ω | 4Ω |
| Power handling | 600W (continuous),240ow (peak) | 800W (continuous), 320oW (peak) |
| Crossover | 1.7KHz | 1.6KHz |
| LF | 2x12"MF/LF/75mm voice coil | 2x15"MF/LF/75mm voice coil |
| HF | Ti/PK diaphragm/75mmvoice coil/neodymium magnet | Ti/PK diaphragm/75mm voice coil/neodymium magnet |
| Coverage(HxV) | 80°x50° | 80°x50° |
| Max SPL | 133dB | 135dB |
| Dimension(WxHxD) | 418x917x410 (mm) | 481x1076x480 (mm) |
| Weight | 41kg | 49kg |
| Model | K18S | K1218S |
| Type | 18"Low-frequency | 2x18"woofer |
| Frequency Response | 40Hz~150Hz(-10dB) | 35Hz~150Hz(-10dB) |
| LF | 18"/100mm Voice coil | 2x18"/(100mm) voice coil |
| Sensitivity (1W@1M) | 97dB | 100dB |
| Nominal Impedance | 8Ω | 4Ω |
| Power handling | 600W (continuous),240ow(peak) | 1200W (continuous), 48ooW(peak) |
| Max. SPL | 131dB | 137dB |
| Dimensions (WxHxD) | 568x627x710 (mm) | 1236x568×710(mm) |
| Weight | 46kg | 82kg |
The membrane (i.e. paper cone) is mainly composed of the paper pulp and the carbon filament,light,and with high rigidity.The paper cone dimension is comparatively big,the intermediate frequency response and transient response are super.
K212F
K215F
| Type | 2-way 12" fullrange speaker | 2-way 15"fulrange speaker |
| Frequency response | 65Hz~18kHz(-10dB) | 60Hz~18kHz(-10dB) |
| Sensitivity(1W@1m) | 97 dB | 98dB |
| Nominal Impedance | 8Ω | 8Ω |
| Power handling | 300W (continuous), 120ow (peak) | 400W (continuous),160oW (peak) |
| Crossover | 2kHz | 1.8KHz |
| LF | 12" MF/LF/75mm voice coil | 15" middle and bass/75mm voice coil |
| HF | PK membrane/44mm voice coil | Ti/PK diaphragm /75mm voice coil/ neodymium magnet |
| Coverage(HxV) | 90°x50° | 80°x50° |
| Max SPL | 128dB | 130dB |
| Dimension(WxHxD) | 380x585x383(mm) | 445x706x431(mm) |
| Weight | 25kg | 31kg |
KA Series Entertainment Audio System
Instruction:
Soundkig"KA"seriesspeakerisdsignedspeciallforstagengineringapplication.Itfeaturesewspectscompletespcification andeconomicalconfigurationItsfurishingcanbepaintingorvlvetforoptionaccordingtothediferentneedsAnditisplicablefor bar, coffee hall, club,middle& small performance locations,etc.
Features:
> Cabinet adopts MDF,strong strength,and is very economical.
> Wooferadopts high temperature-resistant KAPTON voice coil frame,high effcient magnetic circuit design.
> Tweeteradoptsaluminum diaphragmand PENdiaphragm,accuratephase correctorensure the cleannessof high frequency.
> Accurately designed crossover network ensure the speaker's sound quality can be reproduced truly.
> It sets build-in LC crossover with high frequency protection of low distortion.
> It features 12 M10 hanging system,convenient and safe hanging seting.
> Φ35mm bracket holes ensure the stability of product fixed installation.
| Model | KA10A | KA12A | KA15A |
| Type | 10" 2way active speaker | 12 " 2wayactive speaker | 15 " 2way active speaker |
| Frequency response | 60Hz-20kHz(-10dB) | 50Hz-20kHz(-10dB) | 45Hz-20kHz(-10dB) |
| Sensitivity(1W@1m) | -10dBV±1dBV | -10dBv±1dBv | -10dBv±1dBv |
| Amp power rated | 200W | 250W | 250W |
| Crossover | 2.0KHz | 2.2kHz | 2.0KHz |
| LF | 10" woofer 50 mm voice coil | 12"woofer 65 mm voice coil | 15"woofer 65 mm voice coil |
| HF | 34mm driver/1inch exit | 34mm driver/1inch exit | 34mm driver/linch exit |
| Coverage(HxV) | 80°x60° | 80°x60° | 80°x60° |
| Max SPL | 121dB | 123dB | 123dB |
| Dimension(WxHxD) | 353.5x555x426(mm) | 409x628x472(mm) | 452.6x710x518(mm) |
| Weight | 20.8kg | 25.5kg | 31.3kg |
| Model | KA10 | KA12 | KA15 |
| Type | 10"2 way passive speaker | 12"2 waypassive speaker | 15" 2way passive speaker |
| Frequency response | 60Hz—20KHz(-10dB) | 50Hz—20kHz(-10dB) | 45Hz—20kHz(-10dB) |
| Sensitivity(1W@1m) | 94dB | 96dB | 96dB |
| Nominal Impedance | 8Ω | 8Ω | 8Ω |
| Power handling | 200W(continuous),oow (pak) | 250W(contiuous),ow(ak) | 250W(continuous),10oow (peak) |
| Crossover | 2.0kHz | 2.2kHz | 2.0kHz |
| LF | 10" LF/50mm voice coil | 12" LF/65mm voice coil | 15" LF/65mm voice coil |
| HF | 34mm driver/1" exit | 34mm driver/1" exit | 34mm driver/linch exit |
| Coverage(HxV) | 80°x60° | 80°x60° | 80°x60° |
| Max SPL | 121dB | 123dB | 123dB |
| Input mode | 2xSPEAK0N+2xJACK | 2xSPEAKON+2xJACK | 2xSPEAKON+2xJACK |
| Dimension(WxHxD) | 353.5x555x426 (mm) | 409x628x472 (mm) | 452.6x710x518 (mm) |
| Weight | 19.1kg | 23kg | 28.6kg |
KA Series Active Entertainment Audio System
KA215A
| Type | dual 15 inch active woofer |
| Fre resp | 45HZ-20KHZ(-10dB) |
| Sensitivity(1m/1w) | -10dBv±1dBv |
| Rated impedance | 40hm |
| Rated power | 500W |
| Max power | 1000W |
| Crossover | 2.2KHZ |
| LF unit | 15"woofer 65MM voice coil/2x250W |
| HF unit | 44mm compression driver /1 inch exit/40w |
| Coverage(HxV) | 80°x60° |
| Max SPL(PEAK) | 132dB |
| Dimension(WxHxD) | 471.7 x 1050 x 538(mm) |
| Weight | 54.7kg |
Bottom wheels for easy moving
| Type | 2×15 "two way passive full range speaker |
| Frequency response | 40Hz-20kHz(-10dB) |
| Sensitivity(1W@1m) | 99dB |
| Nominal Impedance | 4Ω |
| Power handling | 500W(continuous),20oow (peak) |
| Crossover | 2.2kHz |
| LF | 2x15" LF /65mm voice coil |
| HF | 44mm compression driver /1 inch exit |
| Coverage(HxV) | 80°x60° |
| Max SPL | 129dB |
| Input mode | 2xSPEAKON+2xJACK |
| Dimension(WxHxD) | 469x1050x538 (mm) |
| Weight | 48kg |
| Model | KA15SA | KA18SA |
| Type | 15"active subwoofer | 18" active subwoofer |
| Frequency response | 35Hz-250Hz(-10dB) | 38Hz-250Hz(-10dB) |
| Sensitivity(1W@1m) | -10dBu±0.5 dBu | -10dBu±0.5dBu |
| Amp power rated | 400W | 500W |
| LF | 15"woofer 75mm voice coil | 18" woofer 75mmvoice coil |
| Max SPL | 125dB | 126dB |
| Dimension(WxHxD) | 479x581x548(mm) | 567x667x600(mm) |
| Weight | 47.6kg | 57.8kg |
KA15S Cutaway view
KA18S Cutaway view
| Model | KA15S | KA18S |
| Type | 15 " subwoofer | 18 "subwoofer |
| Frequency response | 40Hz-250Hz(-10dB) | 38Hz-250Hz(-10dB) |
| Sensitivity(1W@1m) | 96dB | 96dB |
| Nominal Impedance | 80 | 8Ω |
| Power handling | 600W(continuous), 240ow (peak) | 600W(continuous),240ow (peak) |
| LF | 15"woofer/100mm voice coil | 18" woofer/100mm voice coil |
| Max SPL | 127dB | 127dB |
| Input mode | 2xSPEAK0N+2xJACK | 2xSPEAK0N+2xJACK |
| Dimension(WxHxD) | 479x581x548 (mm) | 567x667x600(mm) |
| Weight | 35.2kg | 47.5kg |
KA218S
KA218S Cutaway view
| Model | KA15M | KA15MA | Model | KA218S |
| Type | 15" 2way passive speaker | 15"2way active speaker | Type | 2x18" Subwoofer |
| Frequency response | 45Hz-20kHz(-10dB) | 45Hz-20kHz(-10dB) | Fre resp | 35Hz~250Hz |
| Sensitivity(1W@1m) | 97dB | -10dBv±1dBv | Sensivity(1m/1w) | 99dB |
| Nominal Impedance | 8Ω | / | Rated impedance | 4Ω |
| Power handling | 250W(continuous),0oow (peak) | 250W | Rated power | 1200W |
| Crossover | 2.2kHz | 2.2kHz | Max power | 2400W |
| LF | 15"LF/65mm voice coil | 15" woofer 65mm voice coil | Crossover | 150Hz(recommended crossover) |
| HF | 34mm driver/linch exit | 34mm driver/1" exit | LF unit | 18"woofer/100mmvoice coil/2x600W |
| Coverage(HxV) | 80°x60° | 80°x60° | Max SPL(PEAK) | 136dB |
| Max SPL | 124dB | 124dB | Input mode | 2xSPEAKON+2JACK |
| Input mode | 2xSPEAK0N+2xJACK | / | Dimension(WxHxD) | 1200 x 520x700(mm) |
| Dimension(WxHxD) | 429x635x484 (mm) | 429X635X484(mm) | Weight | 84kg |
| Weight | 22kg | 24.7kg |
KK Series Entertainment Audio System
Instruction:
Based on advanced circuit and electro-acoustic technology, Soundking KK entertainment loudspeakers are specially designed to reproduce powerful bass,round MF,clear treble.The unique and concise enclosure is designed by CAD.They can be used with many subwoofers together,and are the optimal models for entertainment application.
> Tweeter adopts Ti/polyimide diaphragm and Alu winding voice coil to ensuredelicate
> Tone. 15" 1 8 " or 21"subwoofer can be used for the system to enhance more powerful bass.
> Twelve M1O suspension points make quick and reliable setup.
Features:
> Unique and elegant enclosure.Black environment protection imported from Germany;
> RDM cone and dual winding voice coil for woofer ensures wide dynamic operation.
Application:
Bar, disco,entertainment places;
KK10
KK12
| Type | 10"2-way ful range speaker | 12"2-way fullrange speaker |
| Frequency response | 65Hz-18kHz(±3dB) | 55 Hz-18 kHz(±3dB) |
| Sensitivity(1W@1m) | 96dB | 97dB |
| Nominal Impedance | 8Ω | 8Ω |
| Power handling | 250W(Continuous),0o(ak) | 300W(Continuous),20(peak) |
| Crossover | 2.2kHz | 2kHz |
| LF | 10 "LF/MF/65mm voice coil | 12 "LF/MF/75 mm voice coil |
| HF | polyimide diaphragm / 44mm voice coil | polyimide diaphragm /44 mm voice coil |
| Coverage (HxV) | 70°x70° | 90°x50° 128dB |
| Max.SPL | 126dB | |
| Connection socket | 2XNL4MP | 2XNL4MP |
| Dimension (WxHxD) | 325x484x308 (mm) | 369x570x348 (mm) |
| Weight | 17kg | 24 kg |
KK15 Cutaway view
| Model | KK15 | KK153 |
| Type | 15" 2-way full range speaker | 3-way dual driver 15" fullrange loudspeaker |
| Frequency response | 50 Hz-18 kHz(±3dB) | 55 Hz-18 kHz(±3dB) |
| Sensitivity(1W@1m) | 98dB | LF: 97dB, MF+HF: 103 dB |
| Nominal Impedance | 8Ω | LF:8Ω, MF+HF:8Ω |
| Power handling | 400W(Continuous),1600W(peak) | LF:500W(Continuous),20oow(peak) |
| MF+HF:150W(Continuous),600W(peak) | ||
| Crossover | 1.5kHz | 650Hz Active,3.3kHz passive |
| LF | 15 "LF/MF/75 mm voice coil | 15 "LF/MF/100 mm voice coil |
| MF | / | 6.5"mid range |
| HF | polyimide diaphragm/75mm voice coil | Alu diaphragm 34mm voice coil tweeter(Nd magnet) |
| Coverage(HxV) | 80°×50° | 65°x40° |
| Max.SPL | 130dB | 132dB |
| Connection socket | 2XNL4MP | 2XNL4MP |
| Dimension (WxHxD) | 441x690x400 (mm) | 459x720x416 (mm) |
| Weight | 31kg | 35kg |
KK Series Entertainment Project Speaker Series
| Model | KK15S | KK18S |
| Type | 1x15" woofer | 18"woofer |
| Frequency response | 30 Hz-220Hz(±3dB) | 40 Hz-200Hz(±3dB) |
| Sensitivity(1W@1m) | 95dB | 97dB |
| Impedance | 8Ω | 8Ω |
| Power handling | 400W (continuous),16oow(peak) | 700W (continuous),28oow (peak) |
| LF | 15"/75 mm voice coil | 18 "/100 mm voice coil |
| Max.SPL | 127dB | 132dB |
| Connection socket | 2XNL4MP | 2XNL4MP |
| Dimension (WxHxD) | 518x635x490 (mm) | 590x722x575 (mm) |
| Weight | 31kg | 45kg |
KJ Series Active &Passive Entertainment Audio System
Introduction:
KJseries (active and passive) are the newly designed products which feature high sensitivity,high SPL,unique and graceful contour, high performance but low cost.The metal grille protects the components inside.The whole series consists of 12 models. Each model can be mounted on 35mm speaker stand and is designed with recessed handle,and KJ215 has castors for easy transportation.
Features:
>Black carpet finish,metal corners,unique contour;
>High efficiency, low distortion class D power amplifier;
>Brightand full treble,powerful bass,clear vocal;
Application:
Suitable for the professional reinforcement application,e.g.stage show, touring show,bar,etc;
| Model | KJ10A | KJ12A | KJ15A |
| Type | 10 "active loudspeaker | 12 "active loudspeaker | 15"active loudspeaker |
| Frequency response | 60Hz-20kHz(-10dB) | 55Hz-20kHz(-10dB) | 45Hz-20kHz(-10dB) |
| Input sensitivity | 0dBu±0.5dBu | 0dBu±0.5dBu | 0dBu±0.5dBu |
| Amp power rated | 250W(LF),50W(HF) | 250W(LF),60W(HF) | 250W(LF),60W(HF) |
| Crossover | 2.0kHz | 2.2kHz | 2.0kHz |
| LF unit | 10" woofer 50mm voice coil | 12" woofer 65mm voice coil | 15" woofer 65mm voice coil |
| HF unit | 34 mm compression driver/1 inch exit | 34 mm compression driver/1 inch exit | 34 mm compression driver/1 inch exit |
| Coverage(HXV) | 80°x60° | 80x60° | 80°x60° |
| Max SPL | 123dB | 124dB | 125dB |
| Dimension(WXHXD) | 340×509×332(mm) | 402×615×413(mm) | 450×690×465(mm) |
| Weight | 18.4kg | 24.7kg | 30kg |
| Model | KJ215A | KJ15MA | KJ18SA |
| Type | 2 x 15 "active loudspeaker | 15 "active monitor | 18 "active subwoofer |
| Frequency response | 45Hz-20kHz(-10dB) | 43Hz-20kHz(-10dB) | 33Hz-250Hz(-10dB) |
| Input sensitivity | -5dBv | 0dBu±0.5dBu | -10dBu±2dBu |
| Amp power rated | 700W(LF),80W(HF) | 250W(LF),60W(HF) | 900W |
| Crossover | 2.0KHz | 2.0KHZ | |
| LF unit | 2 x 15" woofer 75mm voice coil | 15" woofer 65mm voice coil | 18" woofer 100mm voice coil |
| HF unit | 44 mm compression driver/1 inch exit | 44 mm compression driver/1 inch exit | |
| Coverage(HxV) | 80°x60° | 80°x60° | |
| Max SPL | 130dB | 125dB | 130dB |
| Dimension(WxHxD) | 470.5×1047×477(mm) | 720×460×404(mm) | 540×661×622(mm) |
| Weight | 51kg | 28.6kg | 53.6kg |
| Model | KJ10 | KJ12 | KJ15 |
| Type | 10 "passive loudspeaker | 12 "passive loudspeaker | 15"passive loudspeaker |
| Frequency response | 65Hz-20kHz(-10dB) | 55Hz-20kHz(-10dB) | 45Hz-20kHz(-10dB) |
| Sensitivity(1W@1m) | 94dB | 95dB | 96dB |
| Nominal Impedance | 80hm | 80hm | 80hm |
| Power handling | 200W(coutinuous),8oow(Peak) | 250W(coutinuous),ow(ak) | 350W(coutinuous),140ow(Peak) |
| Crossover | 2.7KHz | 2.7kHz | 2.5kHz |
| LF unit | 10"woofer 50mm voice coil | 12" woofer 65mm voice coil | 15"woofer 75mm voice coil |
| HF unit | 34 mm compression driver/1 inch exit | 34 mm compression driver/1 inch exit | 34 mm compression driver/1 inch exit |
| Coverage(HXV) | 80°x60° | 80°x60° | 80°x60° |
| Max SPL | 123dB | 125dB | 127dB |
| Dimension(WXHXD) | 340×509×332(mm) | 402×615×413(mm) | 450×690×465(mm) |
| Weight | 16.8kg | 23kg | 29.5kg |
| Model | KJ215 | KJ15M | KJ18S |
| Type | 15"passive loudspeaker | 15"passive monitor | 18"passive subwoofer |
| Frequency response | 40Hz-20kHz(-10dB) | 45Hz-20kHz(-10dB) | 33Hz-250Hz(-10dB) |
| Sensitivity(1W@1m) | 98dB | 96dB | 97dB |
| Nominal Impedance | 4 0hm | 8 0hm | 8 0hm |
| Power handling | 700W(coutinuous),28oow(Peak) | 350W(coutinuous),140ow(Peak) | 500W(coutinuous),20oow(Peak) |
| Crossover | 2.0kHz | 2.4kHz | |
| LF unit | 15" woofer 75mm voice coil | 15" woofer 75mm voice coil | 18" woofer 100mm voice coil |
| HF unit | 44 mm compression driver/1 inch exit | 34 mm compression driver/1 inch exit | |
| Coverage(HXV) | 80°x60° | 80°x60° | |
| Max SPL | 132dB | 127dB | 130dB |
| Dimension(WXHXD) | 470.5×1047×477(mm) | 720×460×404(mm) | 540×661×662(mm) |
| Weight | 47.1kg | 27.3kg | 51.5kg |
L Series Engineering Speaker Series
Features:
> LF section adopts copper/aluminum voice coil, magnetic circuit with high efficiency of dissipation;
> HF section adopts accurate phase corrector, excellent Titanium diaphragm;
> Switching betweenLCrossoverandexteralcrossovercanmeetdemandingmixingrequirement.HFprotectioncicuitmakesdistortion low;
> Five aluminum bars for easy hanging;
> Tray with two holes for easy and quick set up.
Applications:
uitable for the applications in multi-purpose hall,show hall, meeting room and auditorium
Cutaway view
| Model | L212 | L215 | L18S | L218S |
| Type | 2X12"two way fullrange cabinet | 2X15"two way full range cabinet | 18"woofer | Dual 18"woofer |
| Frequency response | 50Hz~20KHz(-10dB) | 43Hz~20kHz(-10dB) | 33Hz~150Hz (-10dB) | 33Hz~150Hz (-10dB) |
| 55Hz~18kHz(±3dB) | 48Hz~18kHz(±3dB) | 40Hz~125Hz (±3dB) | 40Hz~125Hz (±3dB) | |
| Sensitivity(1W@1m) | 99dB | 99dB | 98dB | 103dB |
| Nominal Impedance | 4Ω | 4Ω | 8Ω | 4Ω |
| Power handling | 600W (continuous),4w(k) | 1000W (continuous),4w(eak) | 700W (continuous),280ow (peak) | 1400W (continuous), 56oow (peak) |
| Crossover | 1.4kHz | 1.4kHz | 150Hz | 150Hz |
| LF | 2X12"MF/LF/75mm Voice coil | 2X15"MF/LF/100mm Voice coil | 18"/100mm Voice coil | 2X18"/100mm Voice coil |
| HF | Ti/PK Diaphragm/75mm | Ti/PK diaphragm/75mm | / | |
| Voice coil / neodymium magnet | Voice coil / neodymium magnet | 1 | / | |
| Coverage(HxV) | 80°X60° | 80°X60° | / | |
| Max. SPL | 133dB | 135dB | 134dB | 134dB |
| Dimension(WxHxD) | 428x920x426(mm) | 494x478x1090(mm) | 556x650×653 (mm) | 1032x620x720 (mm) |
| Weight | 58.5kg | 61kg | 46kg | 84kg |
H Series Stage Speaker Series
Instruction:
Hseriesofcabinetsadopt highquaitycomponents.HF isequippedwithovercurentprotectionandPTCprotectiontoimprove the cabinetreliability.Hseriesofcabinetsresuitablefortouringshow,meetingroom,multi-purposehallbar,club,etc.
Features:
>Elegant appearance,environmental protection water-paint; >Wearable,solid,water-proof wooden box >High power/sensitivity,sweet tone,rich human voice,powerful bass >Over-current protection and PTC protection for HF >Twelve M10 flying points for quick set up and adjustment
Applications:
>Reinforcement system for touring show, meeting room, multi-purpose hal,bar, club,etc;
>Auxiliary system in medium/large meeting room,auditorium,etc;
| Model | H215 | H18S |
| Type | 2x15"two way full range cabinet | 18"Subwoofer |
| Frequency response | 45Hz~20kHz (-10dB) | 40Hz~150Hz(-10dB) |
| Sensitivity(1W@1m) | 100dB | 97dB |
| Nominal Impedance | 4Ω | 8Ω |
| Power handling | 800W (continuous), 320ow (peak) | 600W(continuous),240ow (peak) |
| Crossoer | 1.8kHz | 150Hz |
| LF | 2x15"MF/LF/75mmvoice coil | 18"/100mm voice coil |
| HF | Ti/PEN composite membrane /75mm voice coil | / |
| Coverage(HxV) | 80°x60° | / |
| Max SPL | 131dB | 129dB |
| Weight | 54kg | 46kg |
| Dimension(WxHxD) | 475x1060x444 (mm) | 572x631x704.4 (mm) |
Instruction:
FPH professional active plastic speaker consist of three active models:FPH15A, FPH12A and FPH1OA.They both can equip a 15"subwoofer for the extended low frequency.
FPH10
FPH12
FPH15
The FPH series are built by rugged and ultra-light gas-injected polypropylene enclosure.This elaborately design enclosure effectivelyavoid the forming of standing wave.The high quality woofer features high power and low distortion, the compression driver is made by a 4 4 \mathsf {mm } PEEK diaphragm.FPH series deliver clear, smooth sound.Its outstanding sound capability can be maximum performed under high dynamic condition.The high efficiency"CLASS-D"amplifier adopts switching mode power of wide-range voltage from 10oV-24OV,which make FPH much lighter than the“CLASS-D"amplifer but getting the equal sound.FPH is equipped with three handles,which is more convenient for carry..
FPH15\FPH12\FPH10 are same size's passive version.
The FPH is designed for meeting room,multi-function hall,music hall, hotel, coffee bar etc
Features:
>High eficiency"CLASS-D"amplifier, high power,low distortion,excellent sound quality.
> Switching mode power supply for light weight,accommodate wide-range voltage from100V\~240V.
> Outstanding performance woofer produce high power, low distortion.
> Constant directivity horn for even coverage.
>Rugged and ultra-light gas-injected polypropylene enclosure
>EQ BOOST to optimize the frequency response,compressor limit LED indication, over heat LED indication.
>Multi-angle cabinet design make FPH can be used for stage monitor.
>Three handles make the carry more convenient.
>5xM10 suspension points for a quick and reliable installation.Can be pole mounted on a 3 5 \mathsf {mm } stand.
| Model | FPH10 | FPH12 | FPH15 |
| Type | 10"2-way Passive Speaker | 12" 2-way Passve Speaker | 15"2-way Passive Speaker |
| Frequency Response | 65Hz~18kHz(±3dB) | 60Hz~18kHz(±3dB) | 55Hz~18kHz(±3dB) |
| 55Hz~20KHz(-10dB) | 50Hz~20kHz(-10dB) | 45Hz~20kHz(-10dB) | |
| Sensivty(1W@1m) | 95dB | 97dB | 99dB |
| Power Handling | 250W (continuous),10oow (peak) | 400W (continuous),160ow (peak) | 400W (continuous),160ow (peak) |
| Coverage (HxV) | 90°x60° | 90°x60° | 90°x60° |
| Nominal Impedance | 8Ω | 8Ω | 8Ω |
| Crossover | 2.2kHz | 1.9KHz | 1.9kHz |
| LF | 1X10"Woofer | 1X12"Woofer | 1X15"Woofer |
| HF | 1X34mm HFCompression Driver(1"Exit) | 1X44mm HFCompressionDriver (1"Exit) | 1X 44mm HF Compression Driver (1"Exit |
| Max. SPL | 125dB | 129dB | 131dB |
| Input Connector/ Output Connector | 2xSPEAKON | 2xSPEAKON | 2xSPEAKON |
| Dimension (W x H x D) | 335x545x319mm | 390x630x360mm | 450x710x370mm |
| Net Weight | 13kg | 20kg | 25kg |
| Model | FPH10A | FPH12A | FPH15A |
| Type | 10"2-way Active Speaker | 12"2-way Active Speaker | 15"2-way Active Speaker |
| Frequency Response | 65Hz~18kHz(±3dB) | 60Hz~18kHz(±3dB) | 55Hz~18kHz(±3dB) |
| 55Hz~20kHz(-10dB) | 50Hz~20kHz(-10dB) | 45Hz~20kHz(-10dB) | |
| Input Sensitivity | 0dBu | OdBu | OdBu |
| Power Handling (RMS) | 250W (LF) | 500W (LF) | 500W (LF) |
| 70W (HF) | 100W (HF) | 100W (HF) | |
| Coverage (HxV) | 90°x60° | 90°x60° | 90°x60° |
| Crossover | 2.2KHz | 1.8KHz | 1.8KHz |
| LF | 1X10"Woofer | 1X12"Woofer | 1X15"Woofer |
| HF | 1X 34mm HF Compression Driver (1"Exit) | 1X 44mm HF compression driver (1"Exit) | 1X 44mm HF compression driver (1"Exit) |
| Max. SPL | 121dB | 125dB | 127dB |
| Input Connector/ Output Connector | Combo(XLR/ JACK),XLR | Combo(XLR/JACK),XLR | Combo(XLR/JACK),XLR |
| Dimension (W x H x D) | 348x557x330mm | 390x630x360mm | 450x710x370mm |
| Net Weight | 14kg | 20kg | 26kg |
| Rated Voltage | AC 110/230V, 50-60Hz | AC 100-240V/50-60Hz | AC 100-240V/50-60Hz |
FPH Series Plastic Speaker
Instruction:
FPH professional active plastic speaker consist of three active models: FPH15AU, FPH12AU and FPH10AU.They both can equip a 1 5 " subwoofer for the extended low frequency.
The FPH seriesare built by rugged and ultra-light gas-injected polypropylene enclosure.This elaborately design enclosureeffectivelyavoid the forming of standing wave.The high quality woofer features high powerand low distortion, the compression driver is made by a 4 4 \mathsf {mm } PEEK diaphragm.FPH series deliver clear, smooth sound.Its outstanding sound capability can be maximum performed underhigh dynamic condition.The high efficiency"CLASS-D"amplifieradopts switching mode power,which make FPH much lighter than the“CLASS-D"amplifer but getting the equal sound.MP3/Bluetooth is more convenient for signal transmission.FPH is equippedwith three handles,which ismore convenient for carry.
The FPH is designed for meeting room,multi-function hall,music hall, hotel, coffee bar etc
Features:
>Highefficiency“CLASS-D"amplifier, high power, low distortion,excellent sound quality.
> Switching mode power supply for light weight.
> Outstanding performance woofer produce high power, low distortion.
> Constant directivity horn for even coverage.
>Rugged and ultra-light gas-injected polypropylene enclosure
>EQ BOOST to optimize the frequency response,compressor limit LED indication, over heat LED indication.
>MP3/Bluetooth is more convenient for signal transmission
>Multi-angle cabinet design make FPH can be used for stage monitor.
>Three handles make the carry more convenient.
>5xM10 suspension points for a quick and reliable installation.Can be pole mounted on a 35mm stand.
| Model | FPH10AU | FPH12AU | FPH15AU |
| Type | 10"2-way Active Speaker | 12"2-way Active Speaker | 15"2-way Active Speaker |
| Frequency Response | 70Hz~20kHz(±3dB) | 60Hz~18kHz(±3dB) | 55Hz~18kHz(±3dB) |
| 60Hz~20kHz(-10dB) | 50Hz~20kHz(-10dB) | 45Hz~20kHz(-10dB) | |
| Input Sensitivity | 0dBu | OdBu | 0dBu |
| Power Handling (RMS) | 250W (LF) | 500W (LF) | 500W (LF) |
| 70W (HF) | 100W (HF) | 100W (HF) | |
| Coverage (HxV) | 90°x60° | 90°x60° | 90°x60° |
| Crossover | 2.5 KHz | 1.8kHz | 1.8kHz |
| LF | 1X10" Woofer | 1X12"Woofer | 1X15"Woofer |
| HF | 1X 34mm HF compression driver (1"Exit) | 1X 44mm HF compression driver (1"Exit) | 1X 44mm HF compression driver (1"Exit) |
| Max. SPL | 121dB | 125dB | 127dB |
| Input Connector/ Output Connector | Combo(XLR/JACK),XLR | Combo(XLR/ JACK),XLR | Combo(XLR/ JACK),XLR |
| Dimension (W x H × D) | 348x557x330(mm) | 390x630x360mm | 450x710x370mm |
| Net Weight | 14kg | 20kg | 25kg |
| Rated Voltage | AC 110/230V.50-60Hz | AC 110/230V50-60Hz | AC 110/230V,50-60Hz |
FPH Series Plastic Speaker
Instruction:
FPH professional active plastic speaker consist of two active models: FPH15AN and FPH12AN.They both can equip a 15"subwoofer for the extended low frequency.
The FPH seriesare built by rugged and ultra-light gas-injected polypropylene enclosure.This elaborately design enclosureeffectively avoid the forming of standing wave.It consists of 4OoW NdFeB Magnets LF paper cone speaker and NdFeB Magnets HF compression driver.FPH series deliver clear, smooth sound.FPH series deliver clear,smooth sound.Its outstanding sound capability can be maximum performed under high dynamic condition.The high efficiency"CLASS-D"amplifier adopts switching mode power of widerange voltage from 10oV-24OV,which make FPH much lighter than the “CLASS-D"amplifer but getting the equal sound.FPH is equipped with three handles,which is more convenient for carry..
FPH15N&FPH12N are same size's passive version.
The FPH is designed for meeting room,multi-function hall,music hall, hotel, coffee bar etc
| Model | FPH12N | FPH15N | |
| Type | 12"2-way Passive Speaker | 15" 2-way Passive Speaker | |
| Frequency Response | 60Hz~18kHz(±3dB) | 55Hz~18kHz(±3dB) | |
| 50Hz~20kHz(-10dB) | 45Hz~20kHz(-10dB) | ||
| Sensitivity(1W@1m) | 97dB | 99dB | |
| Power Handling | 400W (continuous),160ow (peak) | 400W (continuous),160ow (pak) | |
| Coverage (HxV) | 90°x60° | 90°x60° | |
| Nominal Impedance | 8Ω | 8Ω | |
| Crossover | 1.9kHz | 1.5kHz | |
| LF | 1X12"Woofer | 1X15"Woofer | |
| HF | 1X 44mm HF Compression Driver (1"Exit) | 1X75mm HF Compression Driver (1.4"Exit) | |
| Max. SPL | 129dB | 131dB | |
| Input Connector/ Output Connector | 2xSPEAKON | 2xSPEAKON | |
| Dimension (W x H x D) | 390x630x360mm | 450x710x370mm | |
| Net Weight | 16kg | 20kg |
FPH10AN FPH12AN
FPH Series Plastic Speaker
INTRODUCTION:
PS0115SA-G,a subwoofer,can be used with FPH12A and FPH10A (ful range) together asa set.It consists of a15"cone loudspeakerand builtin power amplifier. Class H 6ooW,L/R signal input and output. Signal link ormain loudspeaker output can be selected via a switch.Crossvoer canbe 1 0 0 H z or 80Hz.The loudspeaker cabinet adopts 2Omm HDF in slot structure to ensure pure, rich and transparent tone.35mm mounting hole for convenient application.
PS0115S-G is same size's passive version.
FEATURES:
> High effect “CLASS-H"PA,big power,small distortion and excellent sound quality.
> Power switch design:light weight,stable performance,allow wide power input of 110V\~230V.
> L/R signal input and output. Signal link or main loudspeaker output canbeselectedviaaswitch.Crossvoercanbe1ooHz or80Hz.
> Sub phase swicth with crossover 0 ^ { \circ } 0 \rag 1 8 0 ^ { \circ }
APPLICATION:
Beapplicable for conference,multi-function hall,music hall, restaurant, and coffee house etc professional sound reinforcement locations.Also it is fit for family salon and family concert.
| Type | Subwoofer |
| Frequency response | 40Hz~100Hz(±3dB) |
| 35Hz~120Hz(-10dB) | |
| Input Sensitivity | OdBu |
| Amp power rated | 600W |
| Crossover | 100Hz/80Hz |
| LF | 1X15"LF cone speaker /90mmvoice coil |
| Max. SPL | 129dB |
| In/out connector | 2XCOMBOJACK-XLRFEMALE/4XXLRMALE |
| Dimension(WxHxD) | 500x590x610mm |
| Net weight | 46kg |
| Rated Voltage | AC 110V/230V,50-60Hz |
| Type | Subwoofer |
| Frequency response | 40Hz~100Hz(±3dB) |
| 35Hz~120Hz(-10dB) | |
| Sensitivity(1W@1m) | 98dB(1m/1w) |
| Power Handling | 700W (continuous),28oow (peak) |
| Nominal Impedance | 8Ω |
| Crossover | 100Hz/80Hz |
| LF | 1X15"LF cone speaker /90mmvoice coil |
| Max. SPL | 132dB |
| In/out connector | 2xSPEAKON |
| Dimension(WxHxD) | 500x590x610mm |
| Net weight | 37kg |
| Rated Voltage | / |
FPD Series Plastic Speaker (Active&Passive)
INTRODUCTION:
FPD series plastic speaker cabinet consists of passive series FPD10/FPD12/FPD15,and active series FPD10A/FPD12A/ FPD15A/FPD10AU/FPD12AU/FPD15AU/FPD10AD/FPD12AD/ FPD15AD,which feature high performance and low cost and can be used widely in various applications.
Applications:
Suitable for applications in multifunction hall,conference room, concert hall, hotel, coffee bar,or touring show,family salon, etc;
| FPD10 | FPD10A | FPD10AU |
| FPD12 | FPD12A | FPD12AU |
| FPD15 | FPD15A | FPD15AU |
Features:
> Plastic enclosure, high strength but light weighted.
> High powerand excellent tone tweeterand woofer.
> Active models feature dual poweramplifiers,crossover, low distortion, high performance,3 band EQ,thermal/power surge/short circuit/limit protection.
> Passive models feature LC crossover,PTC/overload protection for reliable performance.
> Trapezoidal enclosure for monitoring application.
> Three handles and light weight for easy transportation.
35mm socket for pole mounting;five M10 flying points for suspension.
| Model | FPD10 | FPD12 | FPD15 |
| Type | 10"2waypassive fullrange loudspeaker | 12"2 waypassive fullrange loudspeaker | 15"2waypassivefullrange loudspeaker |
| Frequency response(-10dB) | 60Hz--20KHz | 50Hz--20KHz | 45Hz--20KHz |
| Sensitivity (1m/1w) | 94dB | 96dB | 97dB |
| Impedance | 8Ω | 8Ω | 8Ω |
| Power handling | 200W(Continuous),8oow(Peak) | 250W(Continuous),10oo(Peak) | 300W(Continuous),1200(Peak) |
| Crossover | 2.5kHz | 2.0kHz | 2.0kHz |
| LF | 10" woofer /50mm voice coil /200W | 12" woofer/65mm voice coil /250W | 15"woofer /65mmvoicecoil/300W |
| HF | 34mm compression driver/1" throat/30W | 34mm compression driver/1" throat/30w | 34mm compression driver/1"throat/30w |
| Coverage(HxV) | 90°x60° | 90°x60° | 90°x60° |
| MaxSPL | 123dB | 126dB | 127dB |
| Input connector | 2xSPEAKON | 2×SPEAKON | 2xSPEAKON |
| Hanging system | 2×M10 | 5×M10 | 5×M10 |
| Dimension(WxHxD) | 335×545×319 (mm) | 390×630×360 (mm) | 450×710×370 (mm) |
| Weight | 13kg | 17.2kg | 20.4kg |
| Model | FPD10A | FPD12A | FPD15A |
| Type | 10"two way actie fullrange cabinet | 12"two way active fullrange cabinet | 15"two way active fullrange cabinet |
| Frequency response(-10dB) | 60Hz--20KHz | 50Hz--20KHz | 45Hz--20KHz |
| Input Sensitivity (line) | OdBu | 0dBu | 0dBu |
| Input Sensitivity (mic) | -40dBu | -40dBu | -40dBu |
| Max SPL(dB) | 121dB | 124dB | 125dB |
| AMP power | 200W (LF)+50W (HF) | 250W (LF)+60W (HF) | 250W (LF)+60W (HF) |
| LF | 10"woofer/50mm voice coil/150W/8Ω | 12"woofer/50mm voice coil/200W/8Ω | 15"woofer/50mm voice coil/200W/8Ω |
| HF | 34mm compression driver/1"throat/30W | 34mm compression driver/1"throat/30W | 34mm compression driver/1"throat/30W |
| Coverage(HxV) | 90°x60° | 90°x60° | 90°x60° |
| Crossover | 2.5 KHz | 2.0 KHz | 2.0 KHz |
| Input connector | JACK/XLR | JACK/XLR | JACK/XLR |
| Input voltage | 115V/230V | 115V/230V | 115V/230V |
| Hanging system | 2×M10 hanging points | 5×M10 hanging points | 5×M10 hanging points |
| Dimension(WxHxD) | 335×545×319 (mm) | 390×630×360 (mm) | 450×710×370 (mm) |
| Weight | 14kg | 17kg | 20.2kg |
| Model | FPD10AU | FPD12AU | FPD15AU |
| Type | 10"two way active full range cabinet | 12"two way active full range cabinet | 15"two way active fullrange cabinet |
| Frequency response(-10dB) | 60Hz--20KHz | 50Hz--20KHz | 45Hz--20KHz |
| Input Sensitivity (line) | OdBu | OdBu | OdBu |
| Input Sensitivity (mic) | -40dBu | -40dBu | -40dBu |
| Max SPL(dB) | 121dB | 124dB | 125dB |
| AMP power | 200W (LF)+50W (HF) | 250W (LF)+60W (HF) | 250W (LF)+60W (HF) |
| LF | 10"w0ofer/50mm voice coil/150W/8Ω | 12"woofer/50mm voice coil/200W/8Ω | 15"w0ofer/50mm voice coil/200W/8Ω |
| HF | 34mm compression driver/1 "throat/30W | 34mm compression driver/1"throat/30W | 34mm compression driver/1"throat/30w |
| Coverage(HxV) | 90°x60° | 90°x60° | 90°x60° |
| Crossover | 2.5 kHz | 2.0 KHz | 2.0 KHz |
| Input connector | JACK/XLR | JACK/XLR | JACK/XLR |
| MP3,SD card/USB interface | MP3,SD card/USB interface | MP3,SD card/USB interface | |
| Input voltage | 115V/230V | 115V/230V | 115V/230V |
| Hanging system | 2×M10 hanging points | 5×M10 hanging points | 5×M10 hanging points |
| Dimension(WxHxD) | 335×545×319 (mm) | 390×630×360 (mm) | 450×710×370 (mm) |
| Weight | 14kg | 17kg | 20.2kg |
This knob adjusts volume normally.Press it to enter into menu to adjust function (4 tone modes/3 band EQ/low cut/ delay,etc,diaplayed on LCD).after function adjustment, user can select EXIT to escape out from menu or it escapes out automatically after no operation.
| Model | FPD10AD | FPD12AD | FPD15AD |
| type | 10"2 way active full range speaker cabinet | 12" 2 way active full range speaker cabinet | 15"2 way active full range speaker cabinet |
| frequency response(-10dB) | 60Hz--20KHz | 50Hz--20KHz | 45Hz- 20KHz |
| input sensitivityLINE | 0dBu | 0dBu | 0dBu |
| MIC | -40dBu | -40dBu | -40dBu |
| max SPL(dB) | 126dB | 128dB | 129dB |
| amp power | 350W (LF)+50W (HF) | 350W (LF)+50W (HF) | 350W (LF)+50W (HF) |
| LF unit | 10 inch LF/50mmvoice coil/200W/8Ω | 12 inch LF/50mm voice coil/200W/8Ω | 15 inch LF/50mm voice coil/200W/8Ω |
| HF unit | 34mm compression driver/1inch throat/30W | 34mm compression driver/1inch throat/30w | 34mm compression driver/1 inch throat/30W |
| coverage(V*H) | 90°x60° | 90°x60° | 90° x60° |
| crossover | 2.4 KHz | 2.4 KHz | 2.4 KHz |
| input connection | 2xJACK/XLR+JACK-3.5 | 2xJACK/XLR+JACK-3.5 | 2 x JACK/XLR+JACK-3.5 |
| DSP | 4 tone mode selection,3 band EQ,low cut,delay, | 4 tone mode selection,3 band EQ, low cut,delay, | 4 tone mode selection,3bandEQ,lowcut, |
| volume control | volume control | delay, volume control | |
| input voltage | 100V-240V(universal) | 100V-240V(universal) | 100V-240V(universal ) |
| suspension | 2×M10 | 5×M10 | 5xM10 |
| dimension(W*H*D) | 335×545×319 (mm) | 390×630×360 (mm) | 450 x710 x370 (mm) |
| weight | 14 kg | 17Kg | 20.2Kg |
KB Series Active Plastic Speaker
INTRODUCTION:
"KB"plasticspeakeirableduluseseaerItadoptslyroperigpsticabetfpastietioog stregthhttadtfuradc &LFspeakerffoacdodictirtscrctios flexiblydelyssitedoderatedidc soft&natureottitlltorf high stability and high security,which can guarantee speaker's normal working.
FEATURES:
> Cabinetadopts highstrength polypropylene engineering plasticof plastic injectionmoulding,good rigidity,lightweight.
> HF& LF speaker of high performance,big power and sound quality;
> Specialhandlebars,isconvenientfortransiting;featuresasymmetrical externaldesign,canbeusedas feedbackspeaker;
> Features high/low tone control,electrical active crossover,can trim tone flexiblyand appropriately.
> D-classbasitswihoweddsoweeerAtatadotedntegatedcuitodprfoane,sallstortiosoft&turete;
> Featursettlotf high security,which can guarantee speaker's normal working.
APPLICATION:
Beapplicable forconferenceroom,ulti-functionall,musichalletcmdum&smallsielocationstatrequirehghersoundqualit
Instruction:
Bserisactivspapditisonatofohfddl oneorPCitlsblofto
KB10AW/KB10AU KB12AW/KB12AU KB15AW/KB15AU
Features:
> High intensity but light weighted polypropylene enclosure
> High quality speaker offers high power and splendid tone
> Handle for convenient transportation; trapezoidal enclosure for monitoring;
> High efficiency, low distortion,high cost performance ratio
> Built-in WIFI function
> HF/LFcontrol,active crossover to fix the tone flexibly
> Switching mode power supply Class D power amplifier, low distortion, natural tone
> Thermal/power surge/short circuit protection,and automatic compression for over load signal to ensure reliable performance; > 4 ^ { \star } \mathsf { M } 1 0 flying points for suspension and 35$ hole for stand installation
Applications:
suitable for the reinforcement in multi-function hall,conference room, theater, etc.
| Model | KB10AW/KB10AU | KB12AW/KB12AU | KB15AW/KB15AU |
| Type | 2-way Active Speaker | 2-way Active Speaker | 2-way Active Speaker |
| Frequency response | 60Hz -20kHz (-10dB) | 55Hz -20kHz (-10dB) | 50Hz -20kHz |
| Input Sensitivity | -10dBv(line) | -10dBv(line) | -10dBv(line) |
| Rated Power | 200W(LF)/50W(HF) | 250W(LF)/70W(HF) | 250W(LF)/70W(HF) |
| Crossover | 3000Hz | 2800Hz | 2200Hz |
| LF | 10"Φ50mm Voice Coil | 12"Φ63.5mm Voice Coil | 15"Φ65mm Voice Coil |
| HF | Φ34mm Voice Coil | Φ34mm Voice Coil | Φ34mm Voice Coil |
| Coverage (HxV) | 90°×60° | 90°×60° | 90°x60° |
| Max SPL(@1m) | 121dB | 123dB | 123dB |
| Dimension (WxHxD) | 345×530×310 (mm) | 410×630×330 (mm) | 495×720×365 (mm) |
| Weight | 16kg | 17.2kg | 25.5kg |
| Model | KB10A | KB12A | KB15A |
| Type | 2-way Active Speaker | 2-way Active Speaker | 2-way Active Speaker |
| Frequency Response | 60Hz - 20KHz (-10dB) | 55Hz - 20kHz(-10dB) | 50Hz - 20kHz(-10dB) |
| Input Sensitivity | -10dBv (line),-42dBu (mic) | -10dBv (line), -42dBu (mic) | -10dBv (line), -42dBu (mic) |
| Crossover | 3kHz | 2.8kHz | 2.2KHz |
| LF | 10 "bass/50mm voice coil | 12 "bass /65mm voice coil | 15 "bass /65mm voice coil |
| HF | AL film /34mm voice coil | AL film / 34mm voice coil | AL film/34mm voice coil |
| Coverage(HxV) | 90°x60° | 90°x60° | 90°x60° |
| Max. SPL | 121dB | 123dB | 123dB |
| Amp power | 200W (LF)+50W (HF) | 250W (LF)+70W (HF) | 250W (LF) +70W (HF) |
| Dimension(WxHxD) | 345x530x310mm | 410x630x330mm | 495x720x365mm |
| Weight | 16kg | 17.2kg | 25.5kg |
| Model | KB10 | KB12 | KB15 |
| Type | 2-way Passive Speaker system | 2-way Passive Speaker system | 2-way Passive Speaker system |
| Frequency response | 60Hz-20KHz(-10dB) | 55Hz-20kHz(-10dB) | 45Hz-20kHz(-10dB) |
| Sensitivity(1W@1m) | 94dB | 96dB | 96dB |
| Nominal Impedance | 8Ω | 8Ω | |
| Power handling | 200W (contiuous),(k) | 250W (continuous),1ooow (peak) | 250W (continuous),10oow (pak) |
| Crossover | 2.5KHz | 2.2kHz | 2kHz |
| F | 10" LF/65mm voice coil (FB1043H) | 12" LF /65mm voice coil (FB1243H) | 15"LF/65mm voice coil(FB1543H) |
| HF | Ti Diaphragm/34mmvoice coil (FE34B) | Ti Diaphragm /34mm voice coil (FE34B) | Ti Diaphragm /34mm voice coil (FE34B) |
| Coverage(HxV) | 90°x60° | 90°x60° | 90°x60° |
| Max SPL | 121dB | 123dB | 123dB |
| Dimension(WxHxD) | 345x530x310 (mm) | 410x630x330 (mm) | 495x720x365 (mm) |
| Weight | 12.7kg | 16.5kg | 20.5kg |




