PRO AUDIO CATALOG
SPEAKERIMIXINGCONSOLEIAMPLIFIER ERIPHERALEQUIPMENT
2019NEW
ANOPERATOFTOTALSOLUTIONANDSERVICEFOR INTELLIGENTAVSYSTEM
NEWPRODUCTS
DM20M20CHDIGITALMIXER
DM8/DM12/DM16 UItra-Compact Digital Mixer
DB16 Remote-Controlled Digital Mixer
DB20P-600/DB20P-1000/DB20P 20CH Rack-m0unted Digital Mixer
MKSeries Economical Professional Mixers
PSeries PoE-based active speaker
DM1616 AolP technology Based Digital Intelligence Audio Matrix
PROFESSIONALSPEAKER
DLS System Column speaker cabinet system with built-in 2OCH digital mixer 14
LS System Column speaker cabinet system 16
LASeries Full-range speaker 18
TS Series Coaxial Loudspeaker 23
FHESeries Stage Monitor Speakers (Active & Passive) 30
KTSeries Active Coaxial Loudspeaker 32
KVSeries Compact Portable Pro Speaker Cabinet 38
PL Series 4 way long projection audio system 44
FWSeries For Mobile Outdoor Performance 48
FHESeries Pro Active& Passive Speakers 51
KSeries Engineering Speaker 57
KA Series Entertainment Audio System 62
KKSeries Entertainment project Audio System 70
KJSeries Active&Passive Entertainment Audio System 74
L Series Engineering Speaker 79
HSeries Stage Speaker 82
FPHSeries Plastic Speaker 85
FPD Series Plastic Speaker 92
KB Series Plastic Speaker 95
FT Series Coaxial Speaker 99
MKSeries Studio Monitor Speaker 101
PAPSeries Portable Combo Speaker System with Built- 102
in 8-channel Digital Mixer
PSMSeries Stereo Monitor Speaker System 108
MIXING CONSOLE
KG Series Recording Mixing Consoles 111
MIX-C Series Mixing Console 114
MIX-CA Series Powered Mixers 115
MIX Series Mixing Console 116
AESeries Microphone & Power Amplifier Combined 117
PROFESSIONALAMPLIFIER& PERIPHERALEQUIPMENT
DG Series Digital Amplifier with DSP 119
AQSeriesDigital PowerAmplifier 120
AG Series Digital Power Amplifier 122
AK Series Network intelligent power amplifier(DSP) 124
EPSeries Voltage Regulator 126
ALSeries Professional Power Amplifier 127
ADSeries Professional Power Amplifier 128
AESeries Professional Power Amplifier 129
AP Series Audio Processor 130
DP Series Audio Processor 133
SEQSeries Loudspeaker Controller 137
SPS Series Power Sequencer 138
AZ Series Power Sequencer 140
DIGITALWIRELESS CONFERENCESYSTEM
PWB69 Digital Wireless Conference System 141
WDM69 Digital Wireless Conference System 142
PLL UHF Wireless receiver Two Channel Wireless Micophone 143
System
Single Channel Wireless Microphone 144
DM20M
THEFIRSTSOUNDKING COMPACTDIGITALMIXER Patent No: 2016830322501
Introduction:
SKDM2oM mixer-2O channels,motorised faders,large touch Screen, USB ports-everything you need for perfect live mixing. DM20M is the result of many years of R&D combining Soundking's experience in signal processing with the latest technologies to give you total control over your sound.
Although ultra compact, DM2oM uses the full potential of our digital mixer expertise without compromising any features.All settings can be recalled including,most importantly, the faders-unique in this class of mixer.Full control isalso available remotely viaWi-Fi so you are free to mix anywhere in the venue.
Thereare 12mic/line inputs,2 stereo inputs all routable via16 buses to 8 balanced outputs.Joining them is a host of professional digital interfaces-AES/EBU, SPDIF and two USB.
The 1024x6oo touch screen makes navigation simple and intuitive, in fact DM2OM can be used straight out of the box without the need to read a 10o page manual!
Studio quality sound,multi-effects engines and full dynamics processing make DM2OM easy way to mix your sound.
1. Dynamics sub-page
The dynamics sub-page allows to change the parameter for the Gate and compressor.
Innovation Points:
S/PDIF in/out & AES/EBU output >7"1024x600 IPS touch screen Input:12 MIC(4 COMBO),2 ST,S/PDIF input,USB input Touch screen sliding operation 8 FX (2 Modulation,2 Delay,2 Reverb,2 GEQ) > BUS:L/R +4MONO+4ST \dot { + } 1Monitor/High quality components:NEUTRIK XLR >2 USB(recording/playback) > iPad remote control > Electro-gain of 12 MIC > 2 . 1 output > Support acoustic environment improvement at RTA measuring mode > Change 15-band GEQ to 31-band. > Supportogg,flac,ape,WAV and MP3. > Bus layer send function allows directly sending the required input channel to current bus at bus interface.
Application:
1) Bar, KTVpartyetc;
2) enterprise,school, etc;
3) band or music show, etc;
4) private home party;
5) studio or live show on the net;
2.Built-in Media Player& Recorder
2 USB(recording/playback)
> Built in media player and recorder
> Playing MP3 or WAV format.The default recording format is WAV. > NeW APE and FLAC file format playing
1 Mic In 8 Adjust Pot
2 Mic/Line In 9 System Control
3Screen 10 Head Phone Port/Pot
4 Channel Strip Section 11 USB
5Master Fader 12 S/PDIF In/Out
6Layer 13 AES/EBU Out Put
7Master Level Meter 14 Stereo Input
3.High Quality Configuration
The 4th generation 4Obit SHARC float point processor,24bit/192kHz AD/DA converting, built-in reverb/delay/compressor/EQ/GEQ.
15-band GEQ upgraded to 31-band
6.iPad Control
> Control DM2O via iPad APP,including gain/EQ/ dynamic /fader, etc.
> Perfectly control DM2O via WiFi using built-in AP or external router.
4. Modulation Subpage
Double press “Modulation1 or 2 " button in the FX Subpage,access to Modulation parameter tuning Subpageas below showed in the picture.
7.4 band EQ
Frequency ranges from 20Hz up to 20kHz.
5.EasyOperationPerfectTone
2.1 output
> One key crossover; set up
2.1 system quickly
> Save the time of mixing and installation
> Easy operation even for anyone
who has no tuning experience
> New RTA function
8. Mono Bus
Bus 1\~Bus 4 are Mono busses.
DM Series
FEATURES
PC/iPad/smartphone remote control
Multiple control via wireless network and Ethernet, compatible witb iOS,
Android,Windows,Mac OS and Linux device
Input channel supports phantom power,4 band PEQ,high pass filter,
compressor, effect and noise gate
Output channel supports reverb,delayand 8 built-in effects
2x USB(stereo recording/playback/system updates/scene storage)
24bit/192kHz ADC/DAC
60dB MIC pre-amp
4AUX,1 Stereo output
4 assignable output
4 built-in effects
Support scene memory
1.MIC IN 7.Main L/R Out
2.MIC Volume 8.Headphone monitoring
3.STEREO IN 9.Channel Selection and LED
4.USB2.0 10.Function Selection and LED
5.AUX OUT 11.USB Play and Pause
6.Effect Foot Switch 12.Universal Knob
| DM8 | DM12 | DM16 | ||||
| CHANNEL | DESCRIPTION | CHANNEL | DESCRIPTION | CHANNEL | DESCRIPTION | |
| MIC IN | 6 | 2 x Combo XLR | 8 | 4 x Combo XLR | 12 | 6 x Combo XLR |
| LINE IN | 1 pair STEREO | 2xJACK | 2 pair STEREO | 4 x JACK | 2 pairs STEREO | 4 x JACK |
| MAIN OUTPUT | LR | "2 x XLR | LR | "2 x XLR | LR | "2X XLR |
| AUX | 2 | 2 x AUX OUT" | 4 | 4 x AUX OUT" | 4 | 4 X AUX OUT" |
| FOOTSWITCH | 2 | 2xJACK | 2 | 2 x JACK | 2 | 2 xJACK |
| MONIITOR | 1 | 1 x HEADPHONE | 1 | 1 x HEADPHONE | 1 | 1 x HEADPHONE |
| USB | 2 x USB to connect USB stick for playback and record,support WAV and MP3 format | |||||
| Network | ||||||
| LAN interface | External wireless USB module | |||||
| 1 x interface for network connection | ||||||
| AD/DA Effect | Maximumsupport 24Bit/192KHz | |||||
| Power supply | 4 effects-2 Reverband2 Delay | |||||
DB Series
Remote-Controlled Digital Mixer
1. MIC IN
2. MIC/LINE IN
3. STEREO IN
4. Output
5.PHONES
FEATURES
PC/iPad/smartphone remote control
Multiple controlviawirelessnetworkand Ethernet,compatiblewitbiOS,Android,Windows,MacOSand Linuxdevice
Inputchannelpportspreamplectroainantompower,4bandQ,ighssfiteompressectndseate
Output channel supports reverb,delay and 8 built-in effects
24bit/192kHz ADC/DAC
2x USB(stereo recording/playback/system updates/scene storage)
16 Busses:4 Mono output,5 Stereo output,1 Stereo monitor
8 assignable XLR output
4 built-in effects
Support scene memory
Support operations and control by the browser of iPad,Android tablet, PC,etc
| CHANNEL | DESCRIPTION | |
| MIC IN | 12 | 12 Combo XLR |
| LINE IN | 2Stereo | 4 Jack |
| Master Out | LR | 6 assignableXLR |
| AUX | 12 | output |
| USB Interface | USB recording/playback(wav) | |
| AD/DA | Maximum 24Bit/192KHz | |
| Effect | 4 effect modules: 2 reverb, 2 delay | |
| Network | Wifi external module | |
| Power Supply | External24VDC(AC90-240V 50/60Hz)power adapter | |
20 Channels Rack Mounting Digital Mixer
DB2OP rack mounting digital mixer series,among which DB20P-6o0/800 is rack mounting digital mixer with amplifier, 1 9 " standard rack mounting. It combines the brand new concept of modern digital mixer and traditional cabinet type mixer.
Compact design,simple operating interface,professional Reverb effect enables the professional an excellent performance,and canalso provide the inexperienced with powerful effect support.
The digital cabinet type mixer DB2OP integrates the function of limiter, effect, divider, equaliserand regular analog mixer,saving you a lot of costs.
DB2OP combines the advantages of high-tech hardware/touch-slide control and iPad remote control.
Equipped with the 4th generation 4Obit SHARC floating point processor, 24bit/192kHz ADC/DAC,internal 8 effects,includingyReverb,Delay, Modulation and GEQ.
1 Display screen 6 Channel section
2 Main channel 7L/R channel
3 USB 8 Adjusting knob
4 Layer 9 System control
5 Power button 10 Headphones
(20 input channels) it includes 12 mic input,2 stereo input and pro digital input interface;16 busses include 8 user defined analog outputs, digital output port and a pair of monitor interface. It provides you with many configuration options. Besides, DB20P is designed with 2 USB ports for playback,recording,scene memory and iPad remote control.
DB20P is equipped with 7 " HD touch screen,WiFi control available,10 parametric encoders,convenient and visual operation.
iPad control
T
> Optional iPad remotecontrol interface > iPad APP realizes gain,EQ,dynamic, fader and other operations of DB20P > Hotpotmode or routermode forspecific transmission distance,easyand perfect control of DB20P
High Quality Configuration
The 4th generation 4Obit SHARC floating point processor, 24bit/48kHz AD/DA converting,built-in reverb/delay/compressor/ EQ/GEQ.
1 Mic, Line input 5Output
2 Mic input 6 Balance digital output
3 Stereo input 7Digital signal input/output
4 Internal Amp output 8Power input
| Model | DB20P | DB20P-600 | |
| Line input | 12 MIC(4 COMBO), 2 Stereo, S/PDIF input, USB input | ||
| Input channel function | Phase,Delay, highpassilter,4-bandparametric EQ noise gate,Compressor,L/RPanfects | ||
| Line output | 8 assignable XLR + AES/EBU,S/PDIF and stereo headphone | ||
| Internal signal generator | white noise/ sine wave/ pink noise | ||
| Phantom power | 48V, each channel switchable alone | ||
| USB function | USB playback/recording(WAV),system upgrade,scene storage,external USB network card | ||
| Screen | 7"1024x600 IPS high definition touch screen | ||
| AD/DA | max support 192KHz/24-bit | ||
| Sample frequency | 48kHz | ||
| DSP | 4th generation ADI 40-bit float point SHARC processor, 450M | ||
| Effects | up to 8 effect modules(2 Reverb,2 Modulation, 2 Delay and 2 31-band GEQ) | ||
| System | custom Android system | ||
| Network | yes via external USB module | ||
| iPad control | yes | ||
| Internal AMP output | no | 4*150W4Ω | 2*500W4Ω |
| Power supply | 100-240V 50/60Hz | 100-120V 50/60Hz,200-240V 50/60Hz | |
| Dimension | 127*483*177mm | 193*483*177mm | |
| Weight | 4.3kg | 6kg | 6.5kg |
EconomicalProfessionalMixers
MK16/MK2O/MK24series economicalprofesionalmixersaredesignedbasedontestartingpointofmasscustomers.Beforedesigning this series of mixers,wehaveconductedaurveyonthefunction,pricingandquaityof thecompetitors'(YAMAHA,BEHRINGER, Soundcraft,ALLEN&HEATH)products,soastonsurethissriesofmixersarepowerful,cost-effctiveandreliable.Theyfeature 10CH/14CH/18CHmicinputs,10OkindsofDSPefects,USBrecordingandplayback,4-bandofEQ,2frequencysweep,4groups/6 auxiliary output, etc.
Detail functions and features are as follow:
1) Built-in switching power supply,AC 10oV-240V.
2) Low noise,large dynamic pre-amp.
3) Condenser mic with 48V phantom power.
4)Built-indigialtsatigdosticrytuiiiasplaeetooo
effects and states.
5)Built-in USB recording, USB recording/playback with adjustable signal level.
6) Built-in 2 x 9 -band graphic EQ.
7)6 auxiliary outputs,4 group outputs,2 auxiliary returns.
8) High precision 12-band level indicator circuit.
9) Japan imported high-end NOBLE potentiometer.
10) Built-in MP3, USB,SD card, Bluetooth playback function.
MK24REAR
| MK16 | MK20 | MK24 | |
| Mono mic | 10 | 14 | 18 |
| Stereo mic | 4 | 4 | 4 |
| Stereo return | 2 | 2 | 2 |
| Main output | 2 | 2 | 2 |
| Group output | 4 | 4 | 4 |
| Auxiliary output | 6 | 6 | 6 |
| USB recording | YES | YES | YES |
| DSP effects | 100 | 100 | 100 |
| MP3/USB/Bluetooth | YES | YES | YES |
P Series PoE-based active speaker
@Dante
(2)P14WA(POE)/P14WPASSIVE
Features
1).PoE-basedactive speakerP14WA(wallmounted/P14CA(ceiling)isanaudiopowermodulewith6Ow/4Ωoutput,whichdoptsthe latestPoEtechnicalstandard.WithonlyonenetworkcablecanrealizepowersupplyandDantedigitalaudiosignaltransmissionand control;
2).IntegratePoEpowersupplyand Danteaudiodata transmissiontosimplifycable layoutandconformtoEthernetengineering specifications;
3). Digital and networked audio transmission realizes, high expendable system;
4).Distributeddigitalaudiosystem:alargeaudiosystemofmultipleinputandoutputdevicesdecentralizedaudiodevicecoection software routing and signal distribution;
5).Using Dante Controlersoftwarecaneasily realizefullynetworked Dantedevicedetectionandaudio routingconfiguration; 6).PoweramplfierfeaturessingleR-4,obpsofantediotransmissionrateoutingcontrolviaDanteControlertric volume,muteiiQteotialourtmpatudotitotetit dissipation;
7).DigitalEQadjustmentand crossover.UsercaneasilysetEQpointsand crossver frequencies matching the speaker.
The parametersanddatasetbyusercanbesavedtothecomputer,thedataon thecomputerandthemachinecanbereadandcalld from each other;
8)PoEnetworkcablingadoptsthe4VCpowersupplyarredbytheretcable,frefromallrestrictiosofhigvoageADabling, better satisfying the safety and fire prevention regulations;
9).Can be widely used in banquet hal/function hall,classroom,conference room, theme park,etc.
Installation
(1)ceiling
(2)wall mounted
PoE-based active speaker
| Model: P14WA(wallmounted)/P14CA(ceiling) | Model: P14W (wallmounted)/P14C (ceiling) |
| Power: 60W | Rated power: 30W(continuous),120W (peak) |
| Directivity: 70°x 70° | Maximum SPL: 105dB(continuous), 110dB (peak) |
| Frequency response: 130Hz-18kHz | Frequency response(-10db): 130Hz-10kHz |
| Connector: single RJ-45 | Sensitivity(1m/1w): 90dB |
| Audio transmission type: Dante | Rated impedance: 8Ω |
| Rate:100 Mbps | Directivity:70°× 70° |
| Routing control: Dante Controller | Input connector: 6.35mm jack |
| Control parameters: volume,mute,limit, EQ, noise gate(optional) | LF unit: 4"/25.5mm voice coil/30W/8Ω/NdFeB |
| Digital THD: 0.001 | Dimensions(DxWxH): 290*200*81(mm) |
| S/N ratio:>100dB(A-weighted) | |
| Function: over-current,high temperature,overload/shortcircuit protection | |
| Cooling: natural heat dissipation | |
| Power input: PoE+,compatible with 802.3af and 802.3at | |
DM1616
DM166isiatelaeiskei soundsourcedaldiantifierocisfdl meetsthedemtsofaidfiteltnfolvetd DM1616asaesdat themostadancdofiguratiootaresteiceifismproddfultsiesdoeucedutmplideratingce. The most popular feature of DM1616 is the very low signal processing costs.
StabilityadrelaitDM616oferssetofcompleteschmetedyamicdsignsyste.Comparedwiththosesystemsusdbyindustry designer,engineer,maintainer,operatorand terminal user,DM1616 hasunparallled stabilityandreliability.
DM1616hastasfsagttrolbldreooossicerkctetedd aplicationcodeatiouluregtobdestsoossicd economicstddcosructioditadpotatl6ssiditmpesic to be called by user at any time.
Afterystemcstructioisfidoheandagdatillifdeateeriterfaceef advantageofmprsitrolteacesdoedlysacdssdotectittotes administrators so as to avoid anyaccident.
MeetingplacesarealldependingonDM1616WenitomestodmandingaudorequirementorgheficiencydesigrequirementD1616 remains the first choice. 1.AES67-2015ndAS-2stadardareusdasbasicframeworkofAolP(udiooerP)torealiedigiadiostributioadtasmsio; itsupportsDanteviceepasiiordaceiserremetsaliealitecomunicatiodutualotroestesd equipments (currently world's first).
2. Built in with ADl fifth generation SHARC ^ + dual core processor supports 32,40 and 64bit floating point calculation and high performance FFT/R/FIR hardware acceleration function,and calculating capacity reaches up to 5.4 GFlops.
3.ThenewgeneratiointegratedmanageetplatfoXetproidfrcfiguratioogriosudioocesinodulesprtslie andremotemaamtdaltitogdotoiaCarooabletoutiddtd can all be completed within the same interface without third party software like Dante Controler.
4.Voltage,current,temperature and level meter monitor.
5.Localalarmiforatiooraetaretmpeaudtuppndloeliiofveetedethifoatio local database so that user can have easy review of running state.
6.Controltectieseesiditnteorkiteceustitsarameesokcitsatedd sound to Dante network by place a microphone within speaker.
7.Virtual connectionandonline controlcan only be established between outputand input or betweensame type ports.
MAINPERFORMANCE
1.This unit offers 16CH analog input and 16CH analog output,25pin D-shape interface
2.24bit/48KHz sound quality,110dB dynamic range
3.6CHanalog inputsallinclude highquaity microphone amplifier(THAT chipset)and independentphantompower switch
4.Analog output adopts electronic transformer chip,auto matching for balance or unbalance connection mode
5.4 x10oM/1oooM Ethernet interface,support AolP cascade and master-slave mode
6.AolP access maximum supports64in+64out AES67 and 64in ^ + 64out Dante
7.Standard module includes EQ,dynamics,delay,mix,crossover,signal generation,tc
8.Expansion module includes echo cancellation,howling suppression,auto mix,auto gain control,etc
9.Internal 4GPl+4GPO control interface can trigger linkage with other external equipment
10.Word Clock input&output, USB2.0 backup interface
11.Exercise independent control on each channel of DSP via Dante.
12.Delay module: support maximum 1s delay and function switching according to demand.
13.Route module: support maximum 16x16 routing.
14. Mix module: support maximum 16x16 mix,input&output gain adjustment and mute switching.
15.EQ module: support maximum 16-band PEQ and 31-band GEQ.
16Filermouleicdelsig,undicutfiHsndlowssfieprovdestootios-ndrt
17.Crossovermodule:supportmaimumfour-wayandinput&outputgainbackadjusting.Eachfrequencypointcanbeadjustedloneandalsotwo
options are provided-LR and ButterWorth.
18.Signal generator module: Currently provide two options-white noise and pure tone.
DM1616AoIPMatrix
DLS System
Introduction
Soundking is the first company to design rack mounting digital mixer into PA product---- DLS portable column.The mixer features the 4th generation SHARC floating point processor,24 bit/48 kHz AD/DA convertor,built-in programs(DSP,reverb,delay,modulation and EQ and GEQ,12 professional mic inputs and4line inputs,professional S/ PDIF digital signal in/out connectors,16 BUS including 8 user-defined analogue output connector and AES/EBU output connectors,USB for playing/recording/scene saving and wireless connection.User can Control the operation via iPad/tablet PC,and audit the sound at every corner,and thenadjust themixingaccording theactual requirement.
LA12SA Active Sub-bass Speaker System is built in with 3CH digital amplifier,which means one Active Sub-bass Speaker can drive two LA308Full-Range Speakersand one LA12S Passive Sub-bass Speaker.
Application
Touring show,Small conference,conference room.
Function Room, Band practice room.
Innovations:
World's firstPAsystemwith internal digital mixer,simplified system,easy installationand debugging Make the job of professionals much easier,iPad or Android tablet remote control based onactual field conditions.
Application system
| SYSTEMCONFIGURATION | MODEL | QUANTITY | UNIT |
| Full range speaker | LA308 | 4 | piece |
| Subwoofer with mixer | DLA12S | 1 | piece |
| Active subwoofer | LA12SA | 2 | piece |
| Passive subwoofer | LA12S | 1 | piece |
| Flight case | JHLS82 | 2 | piece |
| Mixer stand | DF150-3 | 1 | piece |
| Speaker wire | 1 | set | |
| Signal wire | 1 | set |
| SYSTEM CONFIGURATION | MODEL | QUANTITY | UNIT |
| Full range speaker | LA308 | 2 | piece |
| Subwoofer with mixer | DLA12S | 1 | piece |
| Active subwoofer | LA12SA | 1 | piece |
| Flight case | JHDLS32 | 1 | piece |
| Mixer stand | DF150-3 | 1 | piece |
| Speaker stand | DB073 | 2 | piece |
| Speaker wire | 1 | set | |
| Signal wire | 1 | set |
LS System Column speaker cabinet system
LSsrisieuratiftimtetmac aerativethuidoota projection, etc.
ActivesubwoeiiliubueoQltdcdt Clast stableperformance;three-wayindependentampifercandriveoneactivedrivertwofullrange speakersandonepassvesubwoofer
Thewholeetofstpacedinfghtaswaterpofgeodfol-weatrsonlutedtonstalteoleofsstm for different actual conditions.
Features:
> Full range speakers,imported unit, high sensitivity,light weight;
> High strength,light weight and elegant contour of cabinet;
> Clear tone,long projection;
> Three-way independent amplifier can drive one active driver, two full range speakers and one passive subwoofer;
> Easy system combination,fast installation.
| NAME | MODEL | Qty | UNIT |
| Full range speaker | LA208 | 2 | piece |
| Active subwoofer | LA12SA | 1 | piece |
| Speaker stand | SB305 | 2 | piece |
| Speaker wire | 1 | set | |
LS22
| NAME | MODEL | Qty UNIT |
| Full range speaker | LA208 2 | piece |
| Active subwoofer | LA12SA | piece |
| Passive subwoofer | LA12S | piece |
| Flight case | piece | |
| Speaker stand | DB073-1 2 | piece |
Suitable for100\~150 qmvenue
二
| NAME MODEL | Qty | UNIT |
| Full range speaker LA308 | 4 | piece |
| Active subwoofer | LA12SA 2 | piece |
| Passive subwoofer LA12S | 2 | piece |
| Flight case | 2 | piece |
Suitable for500\~800 sqmvenue
| NAME | MODEL | Qty UNIT |
| Full range speaker | LA306 2 | piece |
| Active subwoofer | LA12SA 1 | piece |
| Passive subwoofer | LA12S | piece |
| Flight case | 1 | piece |
| Speaker stand | DB073-1 | piece |
Suitable for 200\~250 sqm venue
| NAME | MODEL | Qty | UNIT |
| Full range speaker | LA306 | 2 | piece |
| Active subwoofer | LA12SA | 1 | piece |
| Speaker stand | SB305 | 2 | piece |
column speaker cabinet system with built-in 20ch digital mixer
Feature
Active Subwoofer
This active subwoofer is configured with a built-in powerful 32bit DSP processor that integrates functions of Gain,Crossover, EQ,Delay,Limit,Program Memory, etc;6DSP modes can be flexibly selected for different applications including Music,Vocal,Live Show, Disco, Karaoke and Conference;3-channel independent and highly-efficient“Class * 0 ^ { \dprime } power amplifier features high power,low distortion,light weight and stable performance.
System Introduction
Acordingtomarketmandurompanytegatesitrogtchologregthtoeleasteand4srisudlte withmetalmateraleclosureIosistsof4modelsmelypasive404andcti48isspeakerseriesfaturh sensititydielitdfd and meet the bandwidth requirement from different kinds of music instruments,we also provide a special 1 2 " subwoofer to enhance ULF band Thisseriesisdsigdwit5mmleonttmforpolmoutigpurposeandsupportsitroboseitsubwororthckouting use for different amplifying applications,simple and convenient.
Application:vebeelioiogall;io suitable for outdoor performance,band,bar,culture saloon, etc;
Features of LA208:
> 8 x 2 ^ { n } full range speakers,Denmark imported Vifa unit,NdFeB magnet,high sensitivity,light weight;
> ALcabinet, high strength,light weight,elegant contour;
> Wide frequency response,clear tone,wide horizontal coverage,long projection,etc;
> 6 . 3 5 \mathsf {mm } JACK and PHOENIX connector for quick and reliable connection;
> Professional U type stand LWM-1 optional for wallinstallation, Hand Vangle adjustable;
{ > } \varphi 3 5 \mathsf {mm } socket for pole mounting (SB305/DB073-1 stand pole).
FeaturesofLA306:
> 6 x 3 ^ { \prime \prime } full range speakers, Denmark imported Faital unit, high sensitivityexcellent MF response;
> Wide frequency response,clear tone,wide horizontal coverage,long projection,etc;
> Professional SPEAKON and PHOENIX connector for quick and reliable connection;
> Professional U type stand LWM-1 optional forwallinstallation, Hand Vangle adjustable;
> φ35mm socket for pole mounting (SB305/DB073-1 stand pole).
LAseries full range column speakers canmeet the requirements of combination system or single purpose for meeting room,use with woofer recommended.
FeaturesofLA306:
> 8 x 3 ^ { \ " } full range speakers,NdFeB magnet,high sensitivity,light weight;
>AL cabinet, high strength,light weight, elegant contour;
> Wide frequency response,clear tone,wide horizontal coverage,long projection, etc;
> Professional SPEAKON and PHOENIX connector for quick and reliable connection;
> Professional stand for fast wall installation;
φ35mm socket for pole mounting (SB305/DB073 stand pole). > 1 2 " woofer,high power,prominent LF effect; > Internal 32bit DSP module with gain,crossover, EQ, delay, limit and memory function.Default oruser defined setting available; > Switching mode power supply,lightweight,reliableperformance; > 3 { \sf C H } Class Dpoweramplifier,high power, low distortion,perfect sound; > Standard \varphi 3 5 \mathsf {mm } socket for pole mounting; > Cooling fan and radiator;
> One LA12SA can drive two LA208/LA306/LA308 and one passive subwoofer.
| Model | LA208 | LA306 | LA308 |
| Transducer | 8x2"(50 mm) neodymium driver | 6x3"(75mm)ferrite driver | 8x3"(75mm) ferrite driver |
| Frequency Response | 160Hz-18kHz | 130Hz-20kHz | 150Hz-17KHz |
| Rated Power | 120W | 120W | 240W |
| Sensitivity | 92dB | 95dB | 97dB |
| Maximum SPL | 118dB | 123dB | 127dB |
| Nominal Impedance | 8Ω | 12Ω | 16Ω |
| Dispersion Angle | 100X15° | 100°X20° | 125°X15° |
| Connection | 1x PHOENIX2x6.3JACK connector | 2xPHOENIX,2x SPEAKON connector | 1x PHOENIX,2x SPEAKON connector |
| Optional Accessories | SB305/DB073-1 | SB305/DB073-1 | DB009-1/DB073 |
| Dimensions(WxHxD) | 70x610x90mm | 124X550X152mm | 103X807X130mm |
| Net Weight(kg) | 2.9kg | 6.5kg | 5.8kg |
LA12SA/LA12S/DLA12S
DLA12Ssubwooferwith internaldigitalmixer
Equipped with 4th generation 4Obit SHARC floating point processor,24bit/48kHz ADC/DAC,built-in effects including reverb,delay,limit and EQ;
16CH input including 12 mic and 4 line;
Professional digital signal in/out connector,16CH bus control including 8 assignable analog out and digital out connectors.
LA12SA front panel
DLA12S front panel
LA12SA
DLA12S
| Transducer | Active Sub Woofer With DSP | Passive sub woofer | Active Sub Woofer With Digital mixer |
| Component | 12"×1 | 12"×1 | 12"×1 |
| Nominal Impedance | 8Ω | 8Ω | 8Ω |
| RMS Power Handling | 400W | 400W | 400W |
| Peak Power Handling | 800W | 800W | 800W |
| Frequency Response | 45Hz-180Hz | 45Hz-180Hz | 45Hz-180Hz |
| Sensitivity(1W/1M) | 95dB | 95dB | 95dB |
| Max. SPL | 124dB | 124dB | 124dB |
| AMP | 900W+2×350W/8Ω | 1 | 1 |
| 2 In 4 Out DSP Module | 1 | 1 | |
| Enclosure | birth plywood | birth plywood | polywood |
| Dimension (WxHxD) | 376x453×479mm | 376×453×479mm | 376×453×479mm |
| Net weigh(kg) | 24.5kg | 18kg | 24.3kg |
| Model | LA404 | LA408 | Model | LA404AD | LA408AD |
| Type | 4×4"passive full | 8x4"passive full | Type | 4×4"active full | 8×4"active full |
| range column system | range column system | range columnsystem | range column system | ||
| Frequency Response(-10dB)100Hz--20kHz | 100Hz--20kHz | Frequency Response(-10dB) | 100Hz--20kHz | 100Hz--20kHz | |
| Sensitivity(1m@1w) | 92dB | 94dB | Sensitivity LINE | 0dBu | 0dBu |
| Max SPL | 119dB | 124dB | Max SPL(dB) | 115dB | 120dB |
| Nominal Impedance | 8Ω | 4Ω | RMS power | 200W | 400W |
| Rated Power | 120W(continue), | 240W(continue), | LF Unit | 4" full range /19mm | 4" full range /19mm |
| 480(peak) | 960(peak) | voice coil/30W | voice coil/30W | ||
| LF Unit | 4*4" full range/19mm | 8*4" full range/19mm | Coverage(V*H) | 80°x20° | 80°x20° |
| voice coil/30W | voice coil /30W | Connection | JACK/XLR, bult-in DSP | JACK/XLR, built-in DSP | |
| Coverage(HxV) | 80°x20° | 80°x20° | Voltage | 100V-240V(wide) | 100V-240V(wide) |
| Connection | 2xSPEAKON | 2xSPEAKON | Mounting | p35+rack | p35+rack |
| Mounting | φ35+rack | p35+rack | Dimensions(WxHxD) | 137.5×526.5×165 (mm) | 137.5×934.5x165 (mm) |
| Dimensions(WxHxD) | 137.5x526.5x165 (mm) | 137.5×934.5×165 (mm) | Weight | 7.5kg | |
| Weight | 6.4kg | 10.8kg | 12kg |
DLA12S-1/LA12SA-1
SUBWOOFER
Feature
For better amplifying effect, this series products adopt new mould metal material and use hierarchical wavelike mesh so as to deliver an astonishing appearance; professional rack mounting is angle-adjustable according to actual conditions. Featuring high sensitivity, high power and very penetrating speech inteligibility,this speaker series is a best choice for vocal sound reinforcement.
12" Subwoofer
| Type | 12active subwoofer | 12" passive subwoofer |
| Frequency Response -10dB | 45Hz--180Hz | 45Hz--180Hz |
| Sensitivity LINE | 0dBu | 95dB |
| Max SPL(dB) | 124dB | 124dB |
| RMS power | 900WLF+2*350W(MHF) | 8Ω |
| LF Unit | 12" LF/75mmvoice coil /350W | 350W(continue),1400(peak) |
| Coverage V*H | 12"subwoofer/75mm voice coil/350W | |
| Connection | 2*XLR+USB,AUX | |
| Voltage | 220V230V | 2xSPEAKON |
| Mounting | 35+rack | 35 |
| Dimensions WxHxD | 376×453×479 (mm) | 376×453x479 (mm) |
| Weight | 24.5kg | 23kg |
20 Channels Rack Mounting Digital
1 Display screen 6 Channel section
2 Main channel 7L/R channel
3USB 8 Adjusting knob
4Layer 9 System control
5 Power button 10 Headphones
Features:
> It combines the brand new concept of modern digital mixer and traditional cabinet type mixer.
> Compact design,simple operating interface,professional Reverb effect enables the professional an excellent performance,and canalso provide the inexperienced with powerful effect support.
> This digital cabinet type mixer integrates the function of limiter, effect, divider,equaliserand regular analog mixer,saving you a lot of costs.
> It combines the advantages of high-tech hardware/touch-slide control and iPad remote control.
> Equipped with the 4th generation 4Obit SHARC floating point processor, 24bit/192kHz ADC/DAC,internal 8 efects,including Reverb,Delay, Modulation and GEQ.
> (20 input channels) it includes 12 mic input,2 stereo input and pro digital input interface;16 busses include 8 user defined analog outputs, digital output portand apair of monitor interface.
> It provides you with many configuration options; designed with 2 USB ports for playback,recording,scene memory and iPad remote control.
> Equipped with 7"HD touch screen,WiFi control available,10 parametric encoders, convenientand visual operation.
DLS series products have wireless transmittingmodeforeasyconnection
1 Mic, Line input 4Output
2 Mic input 5Balance digital output
3 Stereo input 6 Digital signal input/output
Technical Specifications
| Line input | 12 MIC(4 COMBO), 2 Stereo,S/PDIF input, USB input |
| Input channel function | phase,delayhigh pass filter, 4-band parametric EQ, noise gate,compressor,L/R pan,effects |
| Line output | 8 assignable XLR + AES/EBU, S/PDIF and stereo headphone |
| Internal signal generator | white noise/ sine wave/ pink noise |
| Phantom power | 48V, each channel switchable alone |
| USB function | USB playback/recording(WAV),system upgrade,scene storage, external USB network card |
| Screen | 7"1024x600 IPS high definition touch screen |
| AD/DA | max support 192kHz/24bit |
| Sample frequency | 48kHz |
| DSP | ADI 4th generation 4Obit SHARC floating point processor, 450M |
| Effects | up to 8 effect modules(2 reverb,2 modulation,2 delay and 2 15-band GEQ) |
| System | custom Android operating system |
| Network | yes via extermal USB module |
| iPad control | yes |
| Intermal AMP output | no |
| Power supply | 100-240V 50/60Hz |
TS Series Coaxial Loudspeaker Series
Introduction:
Vocaclearestiaforaterspateradseaersoptfrbeasi andHFteuatioffeldctigtodicostatectitaiasakebnetsH&Finterfereeb filtering.
Becauseofthereasonsmentiondbove,themarketurgentlydsaprofessoalteaterloudspeakerofexcelntperformancetouite theater application.
TSseriesispeciallsigndbyUSexpertsvidGunsandtepnJelforgemdumtatereforcemeteriesosist ofS-33adfofdalsie themainloudspeakersoabidsigoaialLF&ompletelydeligteundterfeceessibosantcti horn is equipped with 3 " Ndcompresion driver toensure the high resolution.The nearfield loudspeaker isdesigned with trapezoidal enclosure and35 degree coverage.Except thesubwoofer,each loudspeaker has16 M10flying points toensure reliable suspension.
Application:
TS series is suitable for the applications in large or medium sizeentertainment places,etc.
TS-33 Far Projection Loudspeaker
Introduction:
TS-33 consists of a B&C 1 5 " cone woofer and a 3"Nd magnetic HF compression driver.TS-33 features horn cabinet design,coaxial LF& HF,HF horn coverage 3 5 ^ { \circ } ( \mathsf { H } ) ^ { \star } 3 5 ^ { \circ } ( \mathsf { V } ) ,18mm plywood with slot-tongue structure for robust tone.The cabinet has 16\*M10 flying points for quick and reliable suspension.
Features:
> Horndesignwith strong directivity,high sensitivity, high SPL,far projection > High performance speaker unit to extend frequency response, Nd magnetic HF > Compact structure,coaxial HF&LF to delete sound interference > Symmetrical trapezoidal enclosure for system installation > Constant directivity horn for even frequency response
| Model | TS-33 |
| Type | 15" two way passive loudspeaker |
| Frequency response | 130Hz~18kHz(±3dB) |
| 100Hz~20kHz(-10dB) | |
| Input Sensitivity(1m/1W) | : |
| Sensitivity(1W@1m) | 104dB(LF); 110dB(HF) |
| Power handing | LF: 700W (continuous); 280oW(peak) |
| HF: 110W(continuous); 440w(peak) | |
| Nominal Impedance | LF: 8Ω; HF: 16Ω |
| Coverage(HxV) | 35°x35° |
| Crossover | 950Hz |
| Woofer | 1X15"cone woofer/100mm voice coil |
| HF driver | 1X 75mm HF compression driver (1.4"throat) |
| /75 mm voice coil | |
| Max SPL(@1m) | 139dB(LF); 137dB(HF) |
| Connector | 2XSPEAKON |
| Dimension(WxHxD) | 610x660x830(mm) |
| Net weight | 54kg |
TS-66 Far/Middle Projection Loudspeaker
Introduction:
TS-66 consists of a B&C 15"cone woofer and a 3"Nd magnetic HF compression driver. PTS-66 features horn cabinet design, coaxial LF& HF, HF horn coverage 6 0 ^ { \circ } ( \mathsf { H } ) ^ { \star } 6 0 ^ { \circ } ( \mathsf { V } ) The loudspeaker has no crossover inside,but has to connect with external digital processor to optimize the performance.The glass fiber constant directivity HF horn delivers delicate tone.High quality 18mm plywood cabinet with slot-tongue structure offers robust tone.The loudspeaker has16\*M10 flying points for quick and reliable suspension.
Features:
> Horndesignwith strong directivity, high sensitivity, high SPL,farprojection > High performance speaker unit to extend frequency response,Nd magnetic HF > Compact structure, coaxial HF&LF to delete sound interference > Symmetrical trapezoidal enclosure for system instalation > Constant directivity horn for even frequency response > NEUTRIK connector
| Type | 15"two way passive loudspeaker |
| Frequency response | 130Hz~18kHz(±3dB) |
| 100Hz~20kHz(-10dB) | |
| Input Sensitivity | : |
| Sensitivity(1W@1m) | 103dB(LF); 109dB(HF) |
| Power handling | LF:700W (continuous),280oW(peak) |
| HF:110W (continuous),440W(peak) | |
| Impedance | LF: 8Ω; HF: 16Ω |
| Coverage(HxV) | 60°x60° |
| Crossover | 950Hz |
| Woofer | 1X15"cone woofer/100mm voice coil |
| HF driver | 1X 75mm HF compression driver (1.4"throat) |
| /75 mm voice coil | |
| Max SPL(@1m) | 138dB(LF); 135dB(HF) |
| Connector | 2XSPEAKON |
| Dimension(WXHxD) | 610x660x670(mm) |
| Net weight | 50kg |
Introduction:
TS-SUB consists of two RCF 1 8 ^ { \mathfrak { n } } conewoofers.Thevented cabinet and diagonal unit assembly effectively reduce the standing wave and make the loudspeaker compact.The loudspeaker has no crossover inside,but has to connect with external digital processor to optimize the performance.High quality 18mm plywood cabinet of slot-tongue structure offers robust tone.The loudspeaker has 1 6 ^ { \star } \mathsf { M } 1 0 flying points for quick and reliable suspension.
Features:
> Classic vented structure;LF extended to 33Hz;
> High performance speaker units extends frequency response; NdFeB magnetic;
> Diagonal unit assembly effectively reduces the standing wave and make the loudspeaker compact.
> 18mm plywood with slot-tongue structure for robust tone;
> NEUTRIK connector
| Type | 18"passive subwoofer |
| Frequency response | 45Hz~250Hz(±3dB) |
| 37Hz~280Hz(-10dB) | |
| Input Sensitivity | : |
| Sensitivity(1W@1m) | 101dB |
| Power handling | 2400W (continuous),96oow (peak) |
| Nominal Impedance | 8Ω×2 |
| Crossover | 200Hz |
| Woofer | 2X18" cone woofer/100mm voice coil |
| Max SPL(@1m) | 141dB |
| Connector | 2XSPEAKON |
| Dimension(WxHxD) | 760x910x510(mm) |
| Net weight | 67kg |
TS-UF Filling Loudspeaker
Introduction:
TS-UF consists of a B&C 8"cone wooferand a 1 . 7 3 " Nd magnet HF compression driver.The HF coverage is 1 0 0 ^ { \circ } ( H ) x 7 0 ^ { \circ } ( V ) .Theexternal digital processor optimizes the loudspeaker performance.Glass fiber constant directivity HF horn delivers delicate tone and splendid pan. 1 2 \mathsf {mm } plywood cabinet with slot-tongue structure offer robust tone. The cabinet is designed with 15\*M6 flying points for quick and reliable suspension.
Features:
> Compact design for ceiling installation
> High performance speaker unit extends frequency response; NdFeB magnetic HF
> Multi-angle cabinetfor flexible installation
> External digital processor optimizes the speaker performance
> 15M6 flying points for quick and reliable suspension
> NEUTRIK connector
510 260 On 220
TS-UF
| Model | TS-UF |
| Type | 8"two way passive loudspeaker |
| Frequency response | 120Hz~18kHz (±3dB) |
| 70Hz~20kHz (-10dB) | |
| Input Sensitivity | 1 |
| Sensitivity(1W@1m) | 92dB |
| Power handling | LF: 200W (continuous); 80oW (peak) |
| HF: 50W (continuous); 2oow (peak) | |
| Nominal Impedance | LF: 8Ω; HF: 8Ω |
| Coverage(HxV) | 100x70° |
| Crossover | 4000Hz |
| Woofer | 1X8"cone woofer/50mm voice coil |
| HF driver | 1X 44mm HF compression driver (1"throat) |
| /44 mm voice coil | |
| Max SPL(@1m) | 121dB |
| Connector | 2XSPEAKON |
| Dimension(WxHxD) | 510x270x260(mm) |
| Net weight | 12kg |
TS-DF Near Projection Loudspeaker
Introduction:
TS-DF consists of a B&C 1 2 " coaxial full range speaker,12"cone woofer anda3"HF compression driver. HF horn coverage is 8 0 ^ { \circ } ( \mathsf { H } ) x 8 0 ^ { \circ } ( \mathsf { V } ) The voice coils of HF and LF are reversed to effectively compensate the MF/ HF impedance,and to reduce the distortion but improve efficiency.The trapezoidal design is suitable for near field projection.Aluminum HF horn delivers delicate tone and splendid pan.18mm plywood cabinet with slottongue structure offers robust tone.The cabinet is designed with 12\*M10 flyingpoints for quick and reliable suspension.
Features:
> Full range coaxial speaker design,HF& LF sharing NdFeB magnet; low distortion,highsensitiit;
> High performance speaker unit extends frequency response.
> Coaxial design deletes the interference of HF&LF and makes the loudspeakercompact.
> External processor optimizes the speaker performance.
> Trapezoidal enclosure suits the near field projection; coverage 35 degree;
| Type | 12" two way passive loudspeaker |
| Frequency response | 180Hz~18kHz (±3dB) |
| 150Hz~20kHz (-10dB) | |
| Sensitivity(1W@1m) | 99dB |
| Power handing | LF: 350W (continuous); 1400W (peak) |
| HF: 80W (continuous); 320W (peak) | |
| Nominal Impedance | LF: 8Ω; HF: 8Ω |
| Coverage(HxV) | 80°x80° |
| Crossover | 1200Hz |
| Woofer | 1X12"cone woofer/67mm voice coil |
| HF driver | 1X75mm HF compression driver/75mm voice coil |
| Max SPL(@1m) | 130dB |
| Connector | 2XSPEAKON |
| Dimension(WxHxD) | 540x400x530(mm) |
| Net weight | 23kg |
TS-SF Filling Loudspeaker
Introduction:
TS-UF consists of a 5"cone woofer and a 25mm HF compression driver. delicate tone and splendid pan.12mm plywood cabinet with slot-tongue structure offer robust tone.
Features:
> Compact design
> High performance speaker unit extends frequency response; NdFeB magnetic HF
> Multi-angle cabinet for flexible installation
> Coaxial design deletes the interference of HF &LF and makes the loudspeaker compact.
| Type | 5"two way passive loudspeaker |
| Frequency response | 90Hz~20kHz ±3dB |
| 70Hz~20kHz -10dB | |
| Sensitivity(1W@1m) | 87dB |
| Power handling | 80W |
| Nominal Impedance | 8Ω |
| Coverage(HxV) | 90°x90° |
| Crossover | 4000Hz |
| Woofer | 1X5"cone woofer/38mm voice coil |
| HF driver | 1X 25mm HF compression driver (1"throat)/13mm voice coil |
| Max SPL(@1m) | 112dB |
| Connector | 2XSPEAKON |
| Dimension(WxHxD) | 250x210x190mm |
| Net weight | 4kg |
| Model | FHE12MA | FHE15MA |
| Type | 12" Active Stage Monitor | 15" Active Stage Monitor |
| Frequency response | 55Hz--20kHz(-10dB) | 50Hz--20kHz(-10dB) |
| LF | 12"LF/75mm voice coil | 15"LF/75mm voice coil |
| HF | 44mm voice coil | 44mm voice coil |
| Input Sensitivity | OdBu | OdBu |
| Max.SPL | 129dB | 131dB |
| Amp power rated | 300W (LF)+80W (HF) | 400W (LF)+80W (HF) |
| Coverage(HxV) | 90°x40° | 90°x40° |
| Crossover | 2.0KHz | 2.0KHz |
| Input connectors | JACK/XLR | JACK/XLR |
| Power supply | 230V/115V | 230V/115V |
| Suspension system | 8 M10 flying points | 8 M10 flying points |
| Dimensions (WxHxD) | 604x360x335 (mm) | 696x415x386 (mm) |
| Net weight | 29Kg | 33Kg |
| Model | FHE12M | FHE15M |
| Type | 12" 2 way Passive Stage Monitor | 15" 2 way Passive Stage Monitor |
| Frequency response | 55Hz--20kHz (-10dB); | 50Hz--20KHz (-10dB) |
| Sensitivity (1W@1m) | 97dB | 98dB |
| Nominal Impedance | 8Ω | 8Ω |
| Power handling | 300W (continuous);1200 (peak) | 400W (continuous); 1600 (peak) |
| Crossover | 2.2kHz | 2.2kHz |
| LF | 12" MF/LF/75mm Voice Coil /300W | 15" MF/LF/75mm Voice Coil /350W |
| HF | 44 mm Compression Driver/1"Throat /40W | 44mm Compression Driver/1" Throat/40W |
| Coverage(HxV) | 90°x40° | 90°x40° |
| Max.SPL | 128dB | 130dB |
| Input Connector | 2×SPEAKON | 2×SPEAKON |
| Suspension system | 12 M10 flying points | 12 M10 flying points |
| Dimensions (WxHxD) | 604x360x335 (mm) | 696x415x386 (mm) |
| Weight | 22kg | 29kg |
Features:
> Elegant appearance,wearable,solid,water-proof wooden box.
> Highperformance tweeterand woofer,big power,excellent tone.
> Seven M1O flying pointsmakes hanging flexible.
| Model | FHE12MB | FHE15MB |
| Type | 12"Active Stage Monitor | 15"Active Stage Monitor |
| Frequency response | 55Hz--20kHz(-10dB) | 50Hz--20kHz(-10dB) |
| LF | 12"LF/75mm voice coil | 15"LF/75mm voice coil |
| HF | Ti/PEN diaphragm /44mm voice coil | Ti/PEN diaphragm/44mm voice coil |
| Input Sensitivity | OdBu | OdBu |
| Max.SPL | 129dB | 131dB |
| Amp power rated | 300W (LF)+80W (HF) | 400W (LF)+80W (HF) |
| Coverage(HxV) | 90°×40° | 90°×40° |
| Crossover | 2.0kHz | 2.0kHz |
| Input connectors | JACK/XLR | JACK/XLR |
| Power supply | 230V/115V | 230V/115V |
| Dimensions (WxHxD) | 608×360×335 (mm) | 696×415×386 (mm) |
| Net weight | 22kg | 28.5kg |
Introduction:
KTseries are three way (dual driver) coaxial active speaker cabinets, each of which consist of an 8 inch MF/HF coaxial speaker (Φ50mm 8" MF unit /Φ44mm HF compression driver) and LF unit (different size for different model) to deliver high power,round and clear tone,even coverage.The Class D poweramp features high efficiency, high power, compact structure,light weight, etc.
Features:
> Unique shape,compact, light-weighted; durable silver environmental friendly paint;
> Solid plywood with slot-tongue structure cabinet to deliver robust tone;
> Dual coaxial driver MF/HF unit to offer optimal coverage and to improve sound clearness and resolution;
> Efficient Class D poweramplifier with 15ooW load capacity,stable performance,low distortion;
> Φ35mm tray for stand installation;
> { \sf K T } series has DSP function to process EQ/X-OVER/LIMIT/DELAY/ volume,etc.The panel operation can be replaced by PC operation via
the USB connection to PC.Professional software is equipped for PC operation.
Conference room,concert hall,multi-function hall,stage monitoring, etc;
Application:
Dual coaxial drivers
| Model | KT315A | KT18SA |
| Type | Active Coaxial Loudspeake | Active Coaxial Subwoofer |
| Frequency response | 50Hz~20kHz (±3dB) | 35Hz~100Hz (±3dB) |
| Input Sensitivity | OdBu | OdBu |
| Max SPL(@1m) | 137dB (peak) | 128dB |
| Amp. power | 1500W | 1500W |
| Coverage(HxV) | 60°x60° | N/A |
| Crossover (LM/MH) | 300Hz(Active) | 80Hz/100Hz |
| 2.0kHz(Passive) | ||
| Input Connector | RCA/XLR | RCK/XLR |
| Supporting system | Φ35 | Φ35 |
| Dimension (WxHxD) | 480x716x472(mm) | 650x719x672(mm) |
| Weight | 33.6kg | 49.5kg |
KT Series Stage Monitor Speaker
The stage monitoring series consists of active and passive types.Angles 3 8 ^ { \circ } / 4 2 ^ { \circ } / 4 5 ^ { \circ } / 4 8 ^ { \circ } / 5 2 ^ { \circ } are offered for option.The series is the best choice for stage showand near field reinforcement.
Features:
> HF/LF units adopts Nd magnet coaxial design.The strong magnet flux density to improve voice coil efficiency and sensitivity,ensure reproducing original sound and lower distortion;
> HF compression driver with Ti/PK compound diaphragm and 75mm voice coil to ensure sound transparency and clear;
> Dual class D power amplifier ofers sufficient headroom.The switching power supply provides wide dynamic and sound purity.Thermal/power surge/ over load/short circuit protection;
> Passive LC crossover;PTC protection of HF;high quality components to reproduce original sound;
> Unique and novel shape; handles for convenient transportation;
> 4 5 ^ { \circ } / 2 0 ^ { \circ } monitoring angle of the enclosure;
> Water-proof painting finish; steel grille for protection;
| Model | KT12M |
| Type | Two way passive monitoring loudspeaker |
| Frequency response | 55Hz -20kHz(±3dB) |
| Sensitivity(1W@1m) | 96dB |
| Nominal Impedance | 8Ω |
| Power handling | 300W(continuous),120ow (peak) |
| Crossover | 1.2KHz |
| LF | 12" LF/75mm voice coil/Nd magnet |
| HF | 75mm compression driver/1.5" exit/ Nd magnet |
| Coverage (HxV) | 80°×80° |
| Max SPL | 127dB |
| Connector | 4×Speakon |
| Dimension (WxHxD) | 468x430x442(mm) |
| Weight | 17.5kg |
| Model | KT12MA |
| Type | Two way active monitoring loudspeaker |
| Frequency response | 55Hz -20kHz(±3dB) |
| Input sensitivity | OdBu |
| Amp power rated | 350W (LF)+100W (HF) |
| Crossover | 1.2KHz |
| LF | 12"LF/75mm voice coil / Nd magnet |
| HF | 75 compression driver /1.5"exit /Nd magnet |
| Coverage (HxV) | 80°×80° |
| Max SPL | 128dB |
| Connector | JACK/XLR |
| Dimension (WxHxD) | 468x430x442(mm) |
| Weight | 20kg |
KT Series Active three-way coaxial system with DSP
Dualcoaxialspeaker
Mellowand cleansound,evenly distributed sound field
AdjustableDSPeffect
1. Peak lamp
2. Signal lamp
3.Power lamp
4. Menu button: press repeatedly to switch between function
5. Function button
6. Function button
7.Exist and save button
8.USB port: used to connect a PC for data transfer
9. Multifunction encoder button: long press for status adjustment
10.MIC IN
11. LINE IN
12.PRELINK OUTPUT
PC software operation interface: support volume,gain,X-Over,PEQ, delay, limit and other function.To import or export user parameters to a PC.
PEQ interface:to drag EQ frequency via mouse or type in data directly forsetting. Each EQ frequency can be independently set for LEVEL and Q value.Each channel supports 5 EQ frequencies.
X-Over interface: to drag X-Over curve via mouse or type in data directly for seting. HlGH and LOW PASS support different attenuation.
KVSeries Compact Portable Pro Speaker Cabinet
Introduction:
KVseries speaker cabinet,one of the most compact pro speaker cabinets,is designed by famous UK expert with plywood and durable black finish.The active mode uses Class D module for compact contour and high efficiency,max power 1ooow but stable powerful performance.Passive model features Nd magnetic design,high sensitivity,abundant powerful bass.
Features:
> Compact,lightweight;
> Class D poweramplifier,reliable performance delicate tone;
> Nd magnet LF unit(passive) and HF compression design;
> Constant directivity horn,coverage 8 0 ^ { \circ } x 6 0 ^ { \circ } : > Also used for 4 5 ^ { \circ } stage monitoring;
> Black durable finish;
> Full range speaker cabinet with 13 flying points and pole socket for various installation.
Application:
Medium/small touring show,entertainment venue,conference room,stage monitoring,etc;
KV15AE
| Model | KV12AE | KV15AE |
| Type | 12inch 2-way active cabinet | 15inch 2-way active cabinet |
| Frequency response | 55Hz~20kHz(-10dB)/60Hz~18kHz(-3dB) | 45Hz~20kHz(-10dB)/55Hz~18kHz(-3dB) |
| AMP power | LF: 205W/HF: 80W | LF: 250W/HF:80W |
| Crossover | 1.7KHz | 1.5KHz |
| LF unit | 12" woofer/34mm voice coil | 15 woofer/63.5mm voice coil |
| HF unit | Compression driver / 34mm voice coil | Compression driver/ 34mm voice coil |
| Coverage(HxV) | 80°x60° | 80°x60° |
| Max SPL | 125dB | 126dB |
| Connector | XLR BAL, JACK and RCA | XLR BAL, JACK and RCA |
| Dimension | 365x341x601(mm) | 430x400x697(mm) |
| Net/gross weight | 18kg/21kg | 21.3kg/25kg |
KV15E
KV12E Cutaway view
| Model | KV12E | KV15E |
| Type | 12inch 2-way passive cabinet | 15inch 2-way passive cabinet |
| Frequency response | 55Hz~20kHz(-10dB)/60Hz~18kHz(-3dB) | 45Hz~20kHz(-10dB)/55Hz~18kHz(-3dB) |
| Sensitivity | 96dB | 96dB |
| Impedandce | 8Ω | 8Ω |
| Rated power | 200W(continue), 400W(program),80oW(peak) | 200W(continue), 400W(program),80oW(peak) |
| Crossover | 2.5kHz | 2.5kHz |
| LF unit | 12" woofer/34mm voice coil | 15"woofer/63.5mmvoice coil |
| HF unit | Compression driver / φ34mm voice coil | Compression driver/ φ34mm voice coil |
| Coverage(HxV) | 80°x60° | 80°x60° |
| Max SPL | 125dB | 125dB |
| Connector | 2 X SPEAKON | 2 X SPEAKON |
| Dimension | 365x341x608(mm) | 430x400x704(mm) |
| Net/gross weight | 17.5kg/21.1kg | 21kg/26.4kg |
KV18SE KV18SAE
KV12E KV15E
| Type | 18inch active subwoofer |
| Frequency response | 35Hz~150Hz(-10dB)/45Hz~100Hz(-3dB) |
| AMP power | 600W |
| LF unit | 18" subwoofer/φ75.8mm voice coil |
| Max SPL | 129dB |
| Connector | XLR BAL |
| Dimension | 530x615x667(mm) |
| Net/gross weight | 32.7kg/37.5kg |
| Type | 18inch passive subwoofer |
| Frequency response | 35Hz~200Hz(-10dB)/45Hz~150Hz(-3dB) |
| Sensitivity(1W@1m) | 96dB |
| Impedance | 8Ω |
| Rated power | 400W(continue),80w(program),160oW(peak) |
| LF unit | 18"subwoofer/φ75.8mm voice coil |
| Max SPL | 127dB |
| Connector | 2xSPEAKON |
| Dimension | 530x615x674(mm) |
| Net/gross weight | 31.8kg/38.5kg |
Introduction:
KV series active speaker cabinets features LF ferrite magnet with symmetric design and heat resistant voice coil for high power load and heat dissipation,HF compression driver with Al diaphragm for delicate tone,24bit 48kHz DSP processor, four tone modes selection,3 band EQ,low cut,limit,delay,volume control,etc;LCD for various parameter adjustment; Dual power amp design: LF Class-D power amp power amp design: LF Class-D power amp for high efficiency, compact contour,high power, light weight,and reliable performance, HF class AB power amp for pleasant tone.
Features:
> 1.Unique and compact contour, light weight, black finish;
> 15mm plywood with slot tongue;
> Φ35mm socket for pole mounting;12 M10 flying points for suspension; > LF Class-D+HF class AB poweramplifier,power 350W+50W;
> 24bit 48kHz DSP,LCD for tone adjustment,3 band EQ,low cut,limit,delay volume control, etc
> 12"15"full range speaker cabinets are designed with universal power supply.
Application:
main reinforcement,filing reinforcement,stage monitoring in multifunction hall, auditorium, etc;
KV12AD
This knob adjusts volume normally.Press it to enter into menu to adjust function (4 tone modes/3 band EQ/low cut/delay,etc, diaplayed on LCD).after function adjustment,user can select EXIT to escape out from menu or it escapes out automatically after no operation.
KV12AD RearPanel
1 Master volume & DSP adjustment
2 LCD
3 Mic/Line volume
4 AUX IN
5 Mic/Line input
6 Output
7 Power switch
8 Power socket
| Model KV12AD |
| Type 12 inch 2 way active speaker cabinet (DSP) |
| Frequency response 60Hz~18kHz (-3dB) |
| 55Hz~20kHz (-10dB) |
| Input sensitivity LINE:0dBu MIC:-40dBu |
| Max SPL 127dB(PeaK) |
| AMP power 350W+50W |
| LF unit 12" woofer/Φ63.5mm voice coil |
| HF unit compression driver/34mm voice coil |
| CoverageH*V 80°x60° |
| Crossover 2.5kHz |
| Input connection(H*V) 2xXLR/Jack combo input,3.5mm jack:XLR LINK output |
| Input voltage 100~240V |
| Suspension 12*M10 flying points+Φ35 |
| Dimension(WxHxD) 365*601*341mm |
| Weight(gross) 17.8/20.7kg |
KV12AD Cutaway view
PL Series
4 way long projection audio system
The perfect tone surpasses that of line array
System configuration:
PL long projection audio system uses 4 way design to offer high SPL, high power, clear and bright HFMF,powerful bass,thus to substitute traditional line array system; convenient installation, easy operation,high performance low cost The cabinet features premium plywood,durable coating finish, ergonomic handle,easy transportation,two professional speaker connectors on the rear panel.
Application: Large square meeting,touring show, bar, etc;
Features:·
> 2 1 inch subwoofer imported from UK ensures powerful bass. >Horn design for 4 way
>MF unit uses 1oomm compound diaphragm compression driverto offer high SPL,high definition and rich tone and overcomes the shortcoming of traditional cone speaker.
> Convenient installation,easy operation,highperformance low cost;
| Product | Model | qty |
| Medium/long projection speaker cabinet | PL2 | 2 pcs |
| MFLF long projection speaker cabinet | PL215 | 2 pcs |
| Medium/long projection subwoofer | PL21S | 2 pcs |
| 20CH digital mixer | DM20 | 1 pcs |
| MFHF horn power amp | AF4200 | 1pcs |
| MFLF power amp | AG2150 | 1 pcs |
| Subwoofer power amp | AG2200 | 1pcs |
| Power sequencer | SPS8 | 1pcs |
| Audio processor | AP4080-Z | 1 pcs |
PL Series Mid/Long Throw Speaker
PL2 Features:
PL2 mid/long projection horn speaker cabinet consists of a100mm MF compression driver and a 75mm HF driver. TheMFMgAl/KAPTON compound diaphragm features high resolutionand SPL.The HF Ceramic/KAPTON compound diaphragm features high SPL.The product is also equipped with specially designed horn to prominently improve the eletro-acoustic efficiency.
PL215 Features:
PL215 mid/long projection MF/LF speaker cabinet consists of horn and two woofers.The LF unit featues NdFeB symmetrical magnet,light weight, leakproof magnet, excellent transient and robust cone,etc.The speaker cabinet delivers powerful bass,clearvocal,prominent detailed performance.When used with the full range speaker cabinet, the system offers ultra-wide dynamic range.
Features:
> 2 x 1 8 " passive bass reflex;
> 2pcs 100mm ferrite LF units;
> Cabinet made from 18mm plywood,exterior treated with black coating.
| Model | GL218S |
| Type | 18"Reflex Loaded Passive Bass Speaker |
| Frequency Response(-10dB) | 32Hz - 200Hz |
| Sensitivity(1W@1M) | 99dB±3dB |
| Max.SPL(peak | 138dB |
| Rated Power | 2000W (continuous) 80oow (peak) |
| Rated Impedance | 4Ω |
| Input | 2 x speakon |
| LF unit | 2X18"subwoofer/100mm voice coil /1800W/4Ω |
| Dimension(WxHxD) | 1115 x 585x 758 (mm) |
| Net weight | 83kg |
| Gross weight | 92.3kg |
| Medium/long projection speaker cabinet | PL2 2 pcs |
| MFLF long projection speaker cabinet | PL215 2 pcs |
| Medium/long projection subwoofer | PL218S 2 pcs |
| Digital mixer | DM20M 1 pcs |
| Digital amplifier | AG4150 2 pcs |
| Digital amplifier | AM2400 1 pcs |
| Audio processor | DP48 1 pcs |
DM20M is the globally first compact digital mixer which features the advantages of premium hardware and iPad remote control,the 4th generation 40 bit SHARC floating point processor,24bit/192kHz DA/AD converting,builtin 8 effect modules (reverb,delay,modulation, GEQ.(20 input channels) 12 professional mic and 2 stereo digital input connectors.16CH BUSes includes 8 assignable analog output and digital output.
| Rated Output Power (THD+N=1%,1kHz continue sine wave, all channel driving] | 8Ω/stereo | 4×1500W |
| 4Ω/stereo | 4×2550W | |
| 2Ω/stereo | 4×3570W | |
| 16Ω/bridge | 2×3000W | |
| 8Ω/bridge | 2×5100W | |
| 4Ω/bridge | 2×7140W |
| 8ΩStereo Power | 2x2400W |
| 4ΩStereo Power | 2x4000W |
| 8QBridged Mono Power | 8000W |
| 4Bridged Mono Power | 12000W |
| Frequency Response | 20Hz~25kHz±0.5dB |
| THD | 0.1% |
| S/N Ratio | 110dB |
| Weight | 13kg |
| Analog input /Analog output | 4 x XLR bal/8 x XLR bal |
| Min load | 150 ohm |
| THD+N | 0.001% at 1kHz OdBu |
| S/N | >100dBA |
| Frequency response | 20Hz - 20kHz; -0.5dBu at 20Hz and 20kHz |
| DSP | 4x32bit filter processing, 96bit precision inte- |
| rmediate data calculation | |
| PEQ | 30 filters for input; 7fiters for output |
FW Series
For Mobile Outdoor Performance
INTRODUCTION:
FW series speakers represent a high quality,full-range and horn loaded speaker which can make high quality sound and sound reproduction.They can be used in any weather condition.
FEATURES:
>Light-weight cabinet,waterproof
> Coaxial structurespeaker
>High sensitivity output,
>Far sound reproduction.
>Safetyand reliability flying settings,easy to install




