WENDT Always on finish ahead!

WENDT Alwaysohefiniish ahead!

1.0

NONWOVEN CLEANING

Coarse Silicon Carbide grain dispersed throughout a strong nylonweb.

Aggressively removes rust. weld spatter, paint and coatings without loading or clogging. Tough enough for deburring.

Easier, safe, and faster alternative to wire brushes.

2.0

CUTTING & GRINDING

A selection of popular cutting wheels for and Steel Stainless Steel.

Extra-thin cutoff wheels for minimal resistance, yet maximum life.

Premium grade Type 27 Grinding Wheels for heavy stock removal on Steel and Stainless.

3.0

COATED ABRASIVES

An assortment of premium abrasive grains bonded to a cotton, polyester or poly-cotton backing.

ALUMINIUM OXIDE (A), (N)

An all purpose grain for general grinding. sanding and finishing.

CERAMIC (K)

ZIRCONIA (E). (R) & (X)

More durable & aggressive than aluminium oxide. Performsbest when slight pressure is applied. Good choice for stainless steel.

Maximum durability with aggressive stock removal and cooler grinding on stainless steel, hard metals, and alloys.

SILICON CARBIDE (S)

A brittle, self-sharpening grain for stone, glass, plastics and very hard materials like titanium.

1.1

1.2

2.2

1.3

3.25

4.0

INTERLEAVED FINISHING

Alternating flaps of coated abrasive and nonwoven finishing materials.

The coated flaps provide light stock removal or deburring. while the nonwoven flaps apply a good finish.

Produces a brushed, or lightly grained finish, as is popular with stainless steel food processing equipment.

NONWOVEN FINISHING

Abrasive grain distributed throughout a3-dimensional nylon web.

Conditions, cleans and finishes the surface without undercuttingthe material.

Some products are available in Surface ConditioningMaterial and Convolute versions with heavier grain concentrations anddensities for added aggressiveness and strength..

PRE POLISHING

High concentration ofabrasive grain throughout a firm, nonwoven base material.

The additional grain requires less operator pressure, increasing tool life and grinding cooler

Achieve final finishes and well prepared surface prior to Polishing.

6.0

FELT POLISHING

For producing up to a mirror finish! Made from 100% wool felt and used with a polishing paste or buffing compound.

Felt is arranged in a flap pattern to allow cooler air flow and dissipate the heat.

Felt flap wheels are more flexible than solid felt points and eliminate the need for assorted shapes.

Wheels also available in slit brushes for added flexibility

4.1.4

4.1.5

4.2.5

4.2.7

4.1.6

5.1

5.1.2

5.1.4

5.2

6.5

4.2.9

6.7

4.1.7

WENDT - The ORIGINAL

Professional tools for grinding and polishing

In all likelihood, you are already familiar with the reputation of Wendt quality. Since 1971, the Wendt name has evolved into a recognized brand, and established itself as a pioneer in the international market. We continue to develop new products with innovative and productive features. Many of these items provide new directions for the metalworking market. Our customers can look forward to this pioneering trend, as well as benefit from the legendary quality of our existing products.

Since 2001, Wendt has expanded its presence into numerous regions and markets. This brings our knowledge and expertise into direct contact with our customers. In doing so, our program and variety of solutions remains clear, complete, and accessible.

In partnership with our customers we often develop specialized products to fit their demanding or specialized needs. For assistance with product recommendations or development, we encourage you to contact our sales department.

In several product lines,Wendt provides the largest assortment available worldwide. For many applications we provide multiple tiers of solutions.

In the flap disc program, for example, the economic Basic-Line already meets high standards for most applications. Thanks to its high reliability it is ideal for general use. With the right product, the work is accomplished easily and the efficiency increases significantly.

Wendt developed the Power-Line for processing particularly demanding applications where product performance is more critical.

When working on specialized materials, or where exceptional performance is needed, the Premium-Line line is available. Inmanycases, these products were designed to perform faster, and reduce ever risinglabor costs. A milestone in this development is the patented Original PowerFlex. Its' scope seems to be endless.

In a leading position

Being a pioneer carries great responsibility,and WENDT has embraced this role during the last four decades.

3-stage polishing & WENDT FPM230

The world's smallest mini flap wheel - 10 x 10 mm

Consider the use of the fiber glass backing plate: It is used in 85 percent of present-day applications. The original design was developed by WENDT.

Wendt was one of the first manufacturers to offer a three-stage polishing set and, thus provide one of the fastest and most effective ways to transform metal surfaces into the perfect finish! This system is ideal when used in combination with theWENDT FPM230.

Wendt has also developed the mini flap wheels, with widths as narrow as 3 millimeters, or diameters of just 10 millimeters.

Whether mini flap wheels or polishingdiscs with felt flaps: it was Wendt innovations whichmade them available to theindustry. We are still the only manufacturer of a flap disc with an aluminium backing featuring an abrasive edge.

Patent by Wendt

PATENT by WENDT

The performance and innovation is evident in the
numerous patents which Wendt holds. Decades of experience in research and development of advanced grinding, cutting and polishing agents are incorporated in our high quality products - Made in Germany.

Did you know?

In 1899 Charles Duell, head of the U.S. Patent Office, thought about a closure of his institution and commented to the President William McKinley: »There is nothingnew. Everything that can be invented has been invented already.« Such errorscan be encountered all too often.

However, we at Wendt are always on the cutting edge. The world around us is constantly changing and with it, our requirements are changing as well.

For more than 40 years Wendt has been able to identify new trends, to make visions come true, and be always one step ahead with a pioneering spirit. By partnering with us, you can enjoy access to our patented product range, Wendt's exclusive innovations, and tocustomized application solutions.

Problem solved – money saved

At some point every material will be conquered. Sweat, calluses and blisters testify to the challenges we all encounter. But when an innovator comes along and cuts metalparts like butter, he gains the attention of his peers.

Abrasive and backing materials can be combined in innumerable variations. Since each work piece, each power tool and each surface has very specific properties, the finishing tool must be adjusted accordingly Therefore, it is critical in our industry to offer a very wide product assortment. We at Wendt carry the deepest program available worldwide. Reliable products, extended product life, and faster performance increase efficiency and productivity andultimately save your customers money. Provide these solutions, and you clients will want to come back to you again and again.

Why we are so sure? It's simple: We pay attention.

Always with an eye on the market

This is the reason we continue to be pioneers in our industry. Innovations by Wendt make it possible to achieve brilliant results and to produce a quality surface finish in one step. Many of our most successful products and patents were inspired by the needs of our customers. We respond to the tasks and the demands of manufacturing and finishing with our products. We appreciate your confidence in our products, as well as the comments, feedback and suggestions you provide us.

For lasting satisfaction, all of our products are
continuously checked to ensure a consistently high level of quality. The same applies to all components and raw materials used in our production. All products manufactured in Germany are certified according to DIN EN ISO 9001:2008.

The Wendt experience

Service is our strength: Benefit from our specialized retailer training at Wendt and then use this knowledge to develop solutions which benefit your customers.

Our pledge: We at Wendt are always interested in developing joint solutions in cooperation with our partners. It is important that we do our best to educate our dealers on the full range of our products and their performance.

Surrounded by magnificent countryside in the beautiful Rhein-Sieg area, we offer product training and seminars lasting several days in a friendly atmosphere for the wholesale trade. The diversity of applications and the need to increase efficiency make this educational support an asset to you and your customers. Better understandingthe available solutions triggers,light-bulb'moments in even experienced clients. Product knowledge is a resource which can be used to develop solutions - and loyal customers!

Therefore: Better choose Wendt!

On the road to success

Since its founding in 1971 by Günter Wendt in Windeck, about 50 kilometers from Cologne, the company isrecognized as a trusted family-run business. It has preserved its traditionalvalues as it has grown and evolved into the new millenia. The approximately 200 employees in our company work together on a daily basis with one goal in mind - meeting the needs of our customers!

»Reliability and a consistently high level of quality!«

From an early age, the current managing directors of the second generation, siblings Frank Wendt and Dr. Marion Wendt-Ginsberg, got to know the subtleties of grinding and polishing products. To this day, they can count on the advice and experiences of their father and mentor, Günter Wendt. In recent years, Frank Wendt has coached the company as it expanded its global presence. At the same time, Dr. Wendt-Ginsberg has overseen new product development as well as improving manufacturing efficiencies.

Since 2001 regional offices have been established in the USA, the UK, Brazil, France and in Romania for the Eastern European market. This global footing ensures the company is well situated for the future. At Wendt - Made in Germany - remains synonymous with unparalleled quality. For our customers this means above all: »Reliability, and a consistently high level of quality!«

WENDT is my brand!

1.0 CLEANING PRODUCTS

WENDT Cleaning Products like REX FLEX CLEANING DISCS are a perfect alternative to wire brushes!

Due to its unique open web construction, the material resists loading and runs cooler than ordinary wire brushes and conventional abrasives. They are much faster and safer to use than wirebrushes, especially on harder alloys, i.e. on stainless steel weld lines, when removing heat discolouration.

The extruded nylon fiber forms an open web, which prevents undercutting and makes them easy to use, when working on different surfaces i.e. removing of gasket, sealing compounds, marine algae or stone-chip coatings, rust, scale, paint and weld discolouration.

Before and after use of REX FLEX CLEANING DISCS on metal surfaces:

Removing Rust

Removing Colour

Removing heat discolouration

REX FLEX NONWOVEN CLEANING DISC

Fiberglass Backing

For aggressive cleaning, or removing rust, paint, epoxy or weld spatter.

Unmounted

REXNONWOVEN CLEANING DISC

Very coarse silicon carbide grain in a nylon web resists loading.

Excellent for cleaning and surface preparation, as well as removing rust, paint, epoxy or weld spatter. Use with flanged adapters to mount on power tools.

Type RD

REUSEABLE 6 MM SHANK forREX CLEANING DISCS

Specially designed 6 mm shank with flush end. Cap contains serrated teeth to secure disc. Adapter can hold either one or two discs.

1.2.1

REX NONWOVEN CLEANING WHEELS

Wheel style mounted on a fixed 6 mm shank

Type RS

Dimensions (mm)			S-Coarse	RPM		10
0A	B	0C	to00	opt.	max.
55	13	6	187510	6.000	12.100
75	13	6	187520	4.000	8.600

CLEANING ROLLS

REX NONWOVEN CLEANING ROLLS

Wide face roll with Quad Keyway or M14 threaded arbor.

TIP Cleaning Rolls should always

be run at lower speeds than coated abrasives. This will extend the roll life and improve finish.

2.0 CUTTING & GRINDING DISCS

WENDT Cutting and Grinding Discs are manufactured to the best performing specifications for a variety of metal working applications.

QUALITY LINES

for Cutting and Grinding Discs

Wendt offers an assortment of Cutting Discs in 3 performance lines to best match the customer's needs. The BASIC, POWER, and PREMIUM lines offer varying combinations of aggressiveness and product life.

Wendt Grinding discs are available in the POWER series for good overall performance.

All materials used in the production of WENDT products are extensively tested to ensure our products deliver the best performance possible. Materials are carefully selected to meet the needs of the products they will go into. All of our Cutting and Grinding Discs are osA-certified.

WENDT Grinding and Cutting Discs are manufactured and certified according to quality standard EN12413. This ensures consistent quality of the products from order to order.

MARKINGS on WENDT Cutting and Grinding Discs

WENDT Quality Line

USA safety standard

European safety standard

Safety Symbols I.

Application

ISO-Identification

Quality:

A: Aluminium Oxide

C: Silicon Carbide

Z: Zirconium

Grain: Grit 4-24 = rough, grit 30-60 = med, grit 70-222 = fine

U: Hardness (A = soft to Z = hard)

BF: Synthetic resin bonding with fibre reinforced

Max. Working Speed (RPM)

Speed

Part Number

Safety Symbols II.

Proof of OSA-Certification

Dimension

Cross Beam Color Codes

PREMIUM-LINE CUTTING DISCS

PremiumCUTTING DISC for STAINLESS STEEL

Extra-Performance discs deliver longest life on stainless steel cutting applications. Iron and Sulphur free specification.

AGGRESSIVENESS +++++十

PRODUCT LIFE +十十十十十

Type 41

POWER-LINE CUTTING DISCS

2.2.1

PowerCUTTING DISC forSTAINLESS STEEL

Provides fast cutting action on stainless steel.
Iron & Sulphur free specification.

AGGRESSIVENESS

++++++

PRODUCT LIFE

++++++

Type 42

2.2.2

PowerCUTTING DISCSfor STEEL

Rapid cutting and good life on mild steel applications.

AGGRESSIVENESS

++++++

PRODUCT LIFE

++++++

Type T1 UNI, T2 UNI

Type 42

Power CUTTING DISCS for ALUMINIUM

Fast cutting and lasting power on aluminium and NF-metals. Special filler materials prevent the disc from loading, thus guaranteeing an efficient sharp cut and a long lifetime.

AGGRESSIVENESS

++++++

PRODUCT LIFE

++++++

Type 41

Power CUTTING DISCS forSTEEL

Engineered for fast cutting action and good life on low power (up to 3 kw) bench top chop saws.

Not for use on hand held saws or grinders.

AGGRESSIVENESS

PRODUCT LIFE

++++++

++++++

are available upon request.

BASIC-LINE CUTTING DISCS

Basic CUTTING DISCS for STAINLESS STEEL

Best choice for customers looking for an economical disc and good overall performance. Iron and Sulphur free specification.

AGGRESSIVENESS十十十十十十

PRODUCTLIFE ++十十十十

POWER-LINE GRINDING DISCS

Power GRINDING DISC for STEEL

Excellent stock removal and good life on mild steel grinding applications.

AGGRESSIVENESS 十十十十十十

PRODUCTLIFE +十+++十

Type 27

PowerGRINDING DISC forSTAINLESS STEEL

Provides fast stock removal on stainless steel. Iron and Sulphur free specification.

AGGRESSIVENESS 十十十十十十

PRODUCT LIFE +++十十十

Type 27

3.0COATED ABRASIVES

Abrasive materials to match your application

A variety of premium grains bonded to a cotton, polyester or poly-cotton backing.

Zirconia (E, R)

Standard cotton

backing for exceptional

performance in both

mild and stainless steel.

100% Zirconia (X)

Poly-cotton backing

for the very best

performance. Combines

long life with aggressive

stock removal.

Aluminium Oxide (N)

Standard cotton

backing general

finishing of mild

steels, stainless

steel and aluminium.

Ceramic (K)

Top coating with polyester

backing for faster stock

removal, increased life, and

cooler grinding on stainless

steel, harder metals and alloys.

3.1

ABOUT WENDT FLAP DISCS

WENDT was one of the first manufacturers of flap discs, and is one of the largest volume producers worldwide. In addition to constantly improving our products, we have developed a number of unique flap discs to satisfy a wide range of needs.

TOP ADVANTAGES OF WENDT FLAPS DISCS

much easier to control

much quieter to operate

do not chatter

less likely to gouge, undercut or otherwise ruin the workpiece

strict quality controls for safety and consistent performance

Flap Discs were developed in the 1980's, and have continued to gain popularity while the demand for many abrasive products has declined in that same period. One of the keys to their success is that they allow an

operator to grind material and create a good finish in one step. Flap discs are very versatile, and the tools they are used on can be found in almost every factory, fabrication shop, and maintenance department.

A CHOICE OF SHAPES:

Depending on the customer demand and preference, Wendt offers three shapes. Our customers can choose between a soft flat, shallow angle, or aggressive angle style.

Type 27 (Conical 8°)

The original style flap disc with slight taper on the flaps

Type 28 (Flat)

Type 29(Conical 15°)

with “built-in grinding angle" for more aggressive stock removal

A VARIETY OF BACKINGS:

Fiberglass

Very strong, yet wears away as the disc is consumed.

Aluminium

For rigid support. Zirconia and ceramic grains perform more aggressively as you apply moderate pressure.

AluEdge

Our patented AluEdge which combines an aluminium backing with a unique consumable edge.

Plastic

Provides firm support, yet more economical than aluminium.

Premium-Line Flap Discs

For maximum performance when it's needed most. Ceramic grain provides the most aggressive stock removal on stainless and hard alloys.

HiTec design contains significantly more abrasive allowing both exceptional life and a better surface finish!

AGGRESSIVENESS PRODUCT LIFE

HiTec

with ZIRCONIA

AGGRESSIVENESS PRODUCT LIFE

Powerflexwith CERAMIC

Power-Line Flap Discs

Available in a wide variety of abrasives and backings for exceptional performance in and productivity.

Powerflex

Powerflex

with ZIRCONIA & Fiberglass Backing

with ALUMINIUM OXIDE & Fiberglass Backing

Powerflex with ZIRCONIA & Reduced Fiberglass Backing

AGGRESSIVENESS PRODUCT LIFE

Powerflex

with ZIRCONIA & Alu Backing (patented AluEdge)

Powerflex with ZIRCONIA & Alu Backing

Basic-Line Flap Discs

Manufactured with the same quality and safety standards as our Premium and Power lines. Good overall performance, in economically priced discs.

AGGRESSIVENESS

PowerEx with ZIRCONIA & Fiberglass Backing

PRODUCT LIFE

PowerEx with ZIRCONIA & Plastic Backing

PREMIUM-Line FLAP DISCS

3.2

HiTec withZIRCONIA

Made with a greater number, and longer individual flaps than our standard version to significantly increase product life. Thicker construction provides more cushioningfor finishing applications. With fiberglass backing.

Type GH1 (Flat, soft)

3.2.1

Powerflex withCERAMIC

Made with a specially engineered Ceramic grain for the most aggressive stock removal and exceptional life on hard materials like stainless steel. This abrasive performs best as pressure is applied by the operator.

AGGRESSIVENESS ++++++ PRODUCT LIFE 十十十十十十

Powerflex with ZIRCONIA

Best choice when working on a variety of materials including carbon steel, stainless steel, aluminium, fiberglass and plastics.

Wendt Powerflex Flap Discs are made with a higher concentration of exceptional abrasive cloth which results in a long life time as well as high aggressiveness.

AGGRESSIVENESS 十十十十十十

For general grinding and finishing on carbon steel, stainless steel, and aluminium.

Also suitable for cooler grinding on thin gauge steel.

NOTE

Improved product thanks

to new formulation!

AGGRESSIVENESS

+++++十

PRODUCT LIFE

++++++

3.4

BASIC-Line FLAP DISCS

3.4.1PowerEx with ZIRCONIA

PowerEx Flap Discs are made with durable Zirconia grain on a cotton cloth backing. They are manufactured under the same quality standards and safety requirements as our more premium grades.

WENDT's best choice for customers looking for an economical solution.

PowerEx Flap Discs remain aggressive, even when used on lower power tools.

AGGRESSIVENESS ++十十十十

PRODUCT LIFE

Specialty FLAP DISCS

Powerflex withZIRCONIA

Reduced Fiberglass Backing

The Powerflex with reduced backing creates a flexible edge that conforms to the workpiece. This makes it ideal for working on edges and inside corners.

AGGRESSIVENESS ++++十十

PRODUCT LIFE ++++十十

Type G 17 (Conical 8°)

Powerflex with ZIRCONIA

Patented AluEdge Aluminium Backing

WENDT's patented grinding edge offers the rigid support of an aluminium backing. The outer grinding edge supports the flaps, yet wears away allowing full use of the disc. Best performing design for aggressive applications!

AGGRESSIVENESS 十十十十十十PRODUCT LIFE +++++十

PATENT by WENDT

Powerflex with ZIRCONIA

Aluminium Backing

The Aluminium Backing is ideal for heat absorption and provides firm support. It is a light material and will not scratch the metal work piece.

AGGRESSIVENESS 十十十十十十PRODUCT LIFE ++++++

3.5.4

PowerEx with ZIRCONIA

Plastic Backing

PowerEx Flap Discs are made with a standard Zirconium cloth with cotton backing. They are manufactured under the same quality standards and safety requirements as our more premium grades. They are the best choice for customers looking at an economical solution.

AGGRESSIVENESS十十十十十十 PRODUCT LIFE ++++十十

MiniFLAP DISCS

MINI FLAP DISC withZIRCONIA

Plastic Backing

The versatility of Zirconia grain on a small diameter plastic backing. Offers more aggressive stock removal and longer life than quick change sanding discs. Ideal for working in confined spaces where larger flap discs will not fit.

REUSABLE 6 MM SHANKformini FlapDiscs

The reusable threaded shaft on 6 mm shank fits both 50 mm and75 mm WENDT MINI FLAPDISCSwith Internal Thread.

3.7

The new & Improved FLEXTREME FLAP DISC

A Patented WENDT Exclusive! WENDT's new FLEXTREME Flap Disc stands alone in the world of abrasives. The innovative design provides a number of outstanding benefits.

Conventional flap disc backings provide strength and support. Flextreme's revolutionary backing is contructedof abrasive material. The backing wears down evenly with the flaps. It can be used to grind and blend interior corners without interference from a backing plate. It also eliminates the need to trim the backing.

Flextreme Advantages

extreme high flexibility due to the unique flap design

reduced vibration allows more comfort & control

perfect control on edges, blends into corners and less risk of undercutting

long life / less waste – use the disc down to the center

faster tool changes with the M14 thread

excellent finish

considerably more usable abrasive than a traditional flap disc

FlexTreme

FLEXTREME

the best of the best

in flexibility, comfort,

control & product life

FLEXTREME FLAP DISCS

PATENT by WENDT

3.8.1

FLEXTREMEwith ZIRCONIA

With thepatented FLEXTREME, thetraditional backing plate has been eliminated and replaced by a fully consumable backingmade from abrasive material. This construction provides up to 60% more usable abrasive than a conventional flap disc - which translates into longer product life!

The new backing of the Flextreme grinds away smoothly with the flaps. Discs backings which needed to be trimmed back manually are not only unnecessary, but obsolete!

FLEXIBILITY ++++++ AGGRESSIVENESS ++++++ PRODUCT LIFE ++++++

IMPROVED DESIGN FOR 2014 New threaded insert provides greater strength.

FlexTreme

NOTE Must be used in combination with the backing spacer (which was originally provided with the power tool).

FOLDED FLAP DISCS

Unique folded flaps are ideally suited for blending welds on fitting attachments. Folded Flap Discs can also being used at a shallow angle if flexible finishing is required.

FLEXIBILITY

AGGRESSIVENESS

PRODUCT LIFE

NOTE Zirconia & Aluminium Oxide Folded Flap Discs are non stock items

ZIRCONIA FOLDED FLAP DISC

Tough zirconia grain for more aggressive stock removal and longer life. Best choice for stainless steel.

ALUMINIUM OXIDE FOLDED FLAP DISCS

Available in a wider grit range for improved finish.

TYPE FS

3.9.1

Grinding and abrading requirements cover a wide spectrum of applications for metal work:

▶For Stock removal, Finishing and Blending

▶Cost effective

▶Varying materials including steel and stainless steel

▶Flat surfaces

▶Contour Surfaces

Resin Fibre Discs are powerful, versatile, flexible, safe and economical. Choosing the right disc for the job assures improved productivity.

3.10.1

RESIN FIBRE DISCSwith ALUMINIUM OXIDE

▶Provides overall economy, with good performance

They contain no halogen producing grinding additives

▶Cost effective stock removal and a safer working environment.

PRODUCT LIFE

++++++

numbers are non stock items!

▶Superior grinding performance

Longer life than aluminium oxide

▶Cool grinding action which reduces glazing and loading

▶Most cost effective when used in high production applications where cutting rates are monitored.

PRODUCT LIFE

Grey-coloured numbers

are non stock items!

TIP\_ Resin Fibre Discs with Ceramic

grain are also available upon request.

BACKING PADS forRESIN FIBRE DISCS

Wendt Backing Pads are made of premium materials to ensure maximum life and performance.

Wendt recommends using a rigid backing pad like ourHeavy Duty grade when working with coarser grit discs (grit 50 and coarser). The firm support ribs increase the discs aggressiveness, while allowing greater air flow and increasing the life of the disc.

Finer grit discs (60 and finer) should be used with the Smooth surface pads. Their more flexible backing provides a better finish.

3.11.1

QUICK CHANGE DISCS ALUMINIUM OXIDE

Durable Aluminium Oxide grain for general purpose grinding and finishing on both ferrous and non-ferrous materials.

TYPE OF FASTENER

WENDT Quick Change Discs are available in either the Type R and Type S fastener styles.

S-TYPE FASTENER

R-TYPE FASTENER

QUICK CHANGE DISCS

ZIRCON+ with Grinding Aid

Premium Zirconia plus a Grinding Aid to dissipate heat and allow cooler grinding on Stainless Steel and hard alloys. Application requires moderate to heavy pressure to activate the grinding aid.

Grinding aid also inhibits loading of softer materials like aluminium and brass.

QUICK CHANGE DISCS

CERAMIC with Grinding Aid

Ceramic grain plus a Grinding Aid for aggressive stock removal on harder materials like stainless and alloys.

Grinding aid dissipates heat, particularly under heavy pressure, while providing maximum life.

QUICK CHANGE HOLDERS

All Wendt quick change holders are industrial grade for long life in flexible finishing applications. Combo versions have a removable shank, and can thread directly onto grinders with M14 spindle.

3.12

ABOUT WENDT FLAP WHEELS

They are commonly used for blending and finishingapplications.

These shank mounted products are ideal for working in hard to reach areas, where a larger disc or wheel will not fit.

Since they are primarily a finishing tool, we manufacture our abrasive flap wheels with a very flexible, yet durable x-weight cotton backing. The added flexibility improve their finishing performance.

Wendt Flap Wheels are manufactured with Premium Aluminium Oxide grain on an X-weight cotton backing.
WENDT flap wheels are made with a standard flush core which allows easy access inside corners.

custom product?

No problem!

Besides offering perhaps the broadest variety of flap wheels, Wendt is renowned for its production of high quality custom flap wheels. Not only can we manufacture custom sizes, but we can also produce in:

SPECIAL MATERIALS

NARROW FACE

WIDE FACE

RECESSED END

SPECIAL SHANKS

If your application requires more aggressive stock removal, see our Flap Bands!

Minimum quanities may apply if special materials are needed. Otherwise, we can produce as few as 100 pieces. Contact us for more information, or for recommended solutions.

FLAP WHEELS

Wendt FlapWheels are manufactured with Premium Aluminium Oxide grain on anX-weight cotton backing. This gives thewheels a superior durability and greater flexibility.

From bronze boat propellers, stainless steel wine tanks, right through airplane landing gear. WENDT Flap Wheels perform the jobs!

WENDT offer the most extensive selection of high performing, long lastings and user friendly abrasive tool. Many applications in the metal working industry would be unthinkable without using flap wheels.

3.14 MINI FLAP WHEELS

WENDT produces someof the smallest and highest quality mini flap wheelsinthe world Ideal for detailed finishing, hard to reach applications, and fabrication and repair.

TIP Custom products have been a mainstay of Wendt's Flap wheel business. A variety of special sizes and materials in abrasive, nonwoven and felt flaps can be manufactured to meet the customer's needs.

Type WM

Grey-coloured numbers are non stock items!