型号及其含义 Model and Its Meaning

C M. L □ / □ □

功能单元代号(见下表)

3-三线制，4-四线制，5-五线制

额定电流(A)

铝合金外壳

密集型

母线槽

C M. L □ / □ □

Functional unit code (see the table below)

3 - Three-wire system, 4 - Four-wire system, 5 - Five-wire system

Rated current (A)

Aluminum alloy housing

Compact type

Bus duct

技术参数 Technical Specifications

母线槽功能单元代号表

产品概述 Product Overview

该产品主要适用于化工，冶金，机械，文化，体育场馆，展览馆，档案馆，博物馆，机场，车站等社会公共场所以及高层建筑等供电系统及消防系统的共用。在正常情况下（非火灾情况）可降容供电；火灾情况下，切断正常供电系统，可按额定电流进行消防供电.从而可达到正常，消防供电两者的兼用，降低成本。

This product is mainly applicable to social public venues such as chemical industries, metallurgy, machinery, cultural institutions, sports venues, exhibition halls, archives, museums, airports, railway stations, etc., as well as power supply systems and fire protection systems of high-rise buildings. Under normal circumstances (non-fire situations), it can be operated at reduced capacity; in the event of a fire, the normal power supply system can be cut off, and fire protection power supply can be provided at the rated current. Thus, it can achieve the dual use of normal and fire protection power supply, reducing costs.

产品概述 Product Overview

XQJ系列电缆桥架具有品种全、应用广、强度大、造价低、施工简单、配线灵活安装标准、外形美观的特点，对您处的技术改进、扩充电缆、维护检修带来方便。

XQJ系列电缆桥架的安装可因地制宜。可随工艺管道架空敷设；楼板，架下吊装；室内外墙壁.柱壁、遂道、电缆沟壁上的侧装，还可在露天立柱或支墩上安装、大型多层桥架吊装或立装时，应尽量采用工字钢立柱两侧对称敷设。

XQJ系列电缆桥架可水平、垂直敷设；可转角、T字形、十字形分支；可调宽、调高。

The XQJ series cable trays feature a wide variety of products, extensive application scope, high strength, low cost, simple construction, flexible wiring installation, strict standards, and attractive appearance. They provide convenience for your technical improvements, expansion of cables, maintenance and repair.

The installation of the XQJ series cable trays can be adapted to local conditions. They can be laid overhead along with the process pipelines; hung from the floor or under the beams; installed on the walls inside and outside the building, on the columns, tunnels, walls of cable trenches; they can also be side-mounted on open-air columns or supports. When installing large multi-story cable trays or lifting or erecting them, it is advisable to use l-beam steel columns with symmetrical laying on both sides.

The XQJ series cable trays can be laid horizontally or vertically; they can branch out in corner, T-shaped or cross-shaped forms; and their width and height can be adjusted.

电缆在电缆桥架上的层次安装 The layered installation of cables on the cable tray

电缆桥架层次排列弱电流控制电缆在最上层。接着一般控制电缆.低压动力电缆高压动力电缆依次往下排列。这种排列有利于屏蔽干扰、电力电缆冷却、方便于施工。

各层电缆桥架层间距离为：

控制电缆≥200mm

动力电缆≥200mm

机械化敷设电缆≥400mm

The weak current control cables are placed on the top layer of the cable tray. Then come the general control cables, followed by the low-voltage power cables and high-voltage power cables arranged in descending order. This arrangement is conducive to shielding interference, cooling the power cables, and facilitating construction.

The spacing between each layer of the cable trays is as follows:

Control cables ≥ 200mm

Power cables ≥ 200mm

Mechanized laid cables ≥ 400mm

桥架空间布置图 Cable tray layout drawing

技术参数 Technical Specifications

WhatsApp

网站 Website

电子样本

印尼森源电气有限公司PT SENYUAN ELECTRICAL INDONESIA

厂址(印尼): JI. Makmur no: 01, Komplek Industri BMK Bayur, Periuk Jaya, Periuk, Tangerang,Banten厂址(上海):上海市嘉定区浏翔公路5555号

idsyec@gmail.com

idsyec.com