该页无缩略图
Operation Instructions 4XX Pattern Sewing Machine (Touch Panel H)
191
Example：
Press the “Main Motor” to enter
the main motor configuration
parameter interface.
We can see all the parameters are
displayed in forms. Clicking any grid
will display the arrow for adjusting the
parameter value. No arrow means the
parameter can not be set.
Set the parameter and then click
the area beyond the grid to save that
parameter value. (Here, we changed
No.1 parameter. After the modification,
we need click at the area pointed by
arrow to save the value)
2.9.12 Alarm Record Mode
In function setting interface, press
, then system will ask for the
manufacturer ID. After user gives the
right ID, the system will enter the
alarm record mode
In this mode, the current alarm
will be recorded. The smaller number
means the later alarm.
It also records the accumulated
production value at each alarm.
Click each number, and the
information of and solution for the
error will be displayed.
4XX Pattern Sewing Machine (Touch Panel H) Operation Instructions
192
2.9.13 Running Records Mode
In function setting interface,
press , then system will
ask for the manufacturer ID. After
user gives the right ID, the system
will Enter the running record mode.
① Accumulated Running
Time: Record total sewing time of
machine.
② Accumulated Sewing
Pieces: Record the total number of
the sewn patterns.
③ Accumulated Power-on
Time: Record the total time of
power-on
④ Accumulated Stitch
Number: Record the total stitch
number of the machine.
Additionally, click “Clear” to
clear the counting value.
[Note]: If the Accumulated
Sewing Pieces is cleared, the
system will also clear the
Accumulated Counter in the
assistant information bar at main
interface.
2.9.14 Date and Time Setting
In function setting interface, press
to enter the date and time
setting mode.
Operation Instructions 4XX Pattern Sewing Machine (Touch Panel H)
193
12、 Method for Setting Date
Click “Year” (Here, it is 2011) to
display two arrows to adjust it
Click “Month” (Here, it is June)
to display the list of months. User can
select the proper month.
After the setting, the display of
year and month will be refreshed to the
right ones.
User can also use &
to check the content in calendar.
Click the day to complete the
setting.
[Note]: User has to set year, month
and date to finish the setting. Only
setting the year and month will not
complete this operation.
13、 Method for Setting Time
In default, user has to set hour
first. Press “hour” to shift the setting to
minute (Pressing “hour” is to change it
to “minute”) and then press the arrows
to change the time.
User can also click the display
area to shift between hour and minute.
After the setting of date and time,
please press to save it.
14、 Forbid to Change System
Time
Once the machine is set with the
periodical passwords, the system will
deny the change on the system time.
After all the passwords are cleared, the
system will unlock the setting of the
system time.
4XX Pattern Sewing Machine (Touch Panel H) Operation Instructions
194
2.9.15 Update Mode
In function setting interface, press
. The system will ask for the
manufacturer ID. Input the correct ID
to enter the software update mode.
The updating software shall be
located in the catalogue “Update” in
the U disk.
Click the content for update (the
content in shadow is the selected), then
press .
2.9.16 Player
In function setting interface,
user can press to play
videos and audios. Videos shall be
of avi format.
2.9.17 Pattern Transformation in Batch
This batch transformation
function can enable the continual
availability of the patterns after
software update.
The default pattern number after
transformation can be allocated
manually.
The default setting is to select all
patterns, and pattern names marked
with x are selected.
The original patterns will be
deleted. If you want to keep them,
Operation Instructions 4XX Pattern Sewing Machine (Touch Panel H)
195
please select Keep Original Patterns at
the bottom.
2.9.18 Hotkey Setting
Hotkey function is used to set the
four function keys at the lower right
corner according to the user’s habits.
Press to enter hotkey
function setting interface. User can set
these four commonly used functions
respectively: pattern-making, test
mode, pattern loading, and pattern
modification.
Pattern-making setting:
Press to enter
pattern-making hotkey setting. After
selecting , press to save
and quit.
4XX Pattern Sewing Machine (Touch Panel H) Operation Instructions
196
2.10 Letter Sewing Edition
In main interface P1 (or P2), press
to activate the catalogue mode,
and then press to enter letter
sewing edition mode.
[Note]: Parameter [Special] -> [Letter
Sewing Function Enable] can be used
to close the function of letter sewing
edition. After that, this icon will not
be displayed
2.10.1 Parameters of Letter Sewing
Functions：
No. Functions Content
A Figure Input Input figures. At most, 20 figures can be inputted
B Font Selection 28 fonts are available。
C Array Method User can select “Horizontal”, “Vertical”, “Upper Arc” “Down Arc”
D Density of Satin Set the satin density. The larger value means the denser satin stitches
E Scaling in Height Scale the height of letter, range: 50~200.
F Letter Pitch Set the interval between letters
G Scaling in Width Scale the width of letter, range: 50~200.
H Return Quit and return to main interface
Operation Instructions 4XX Pattern Sewing Machine (Touch Panel H)
197
I
Rotation/Follow
(Not Follow)
When the array method is linear (vertical or horizontal), the content on the
button will be displayed as “Rotation”, which is to set the rotation angle of
letter；
When the array method is arc (Upper Arc or Down Arc), this button will
display “Follow” or “Not Follow”, which is to set whether the letter
rotates with the arc.
J Trim/Not Trim Set whether to automatically insert thread-trimming code
K Enter Confirm operations. And then enter pattern adjustment interface.
1、Figure input
Press “Input” to enter figure
input interface, where user have
to input at least one figure. 20
figures can be inputted at most.
Press to save the input and
quit.
2、Font Selection
Press “Font” to enter font
selection interface, where 28
types of fonts are provided.
Input the numbers from 1 to 28
to select the font. Press to
save it and quit.
In this interface, the font
will be displayed to users.
3、Array Method
Press “Array” to enter the
interface for setting array
method, where user can select
horizontal linear, vertical linear,
upper arc and down arc. Press
to save it and quit.
4XX Pattern Sewing Machine (Touch Panel H) Operation Instructions
198
4、 Figure Pitch
Press “Pitch” to enter the
letter pitch setting interface.
In horizontal array, it is to
set the horizontal pitch between
letters.
In vertical array, it is to set
the vertical pitch between letters.
In arc array, it is to set the
distance between the letters on
arc.
Range: 0~99.9mm。
5、 Density of Satin
Press “Density” to enter the
interface for setting satin density.
The range is among 50~200.
6、 Scaling in Height
Press “Height” to enter the
interface for setting letter
height，where user can scale the
height of letter. Range: 50~200.
7、 Scaling in Width
Press “Width” to enter the
interface for setting letter width，
where user can scale the width
of letter. Range: 50~200.
Operation Instructions 4XX Pattern Sewing Machine (Touch Panel H)
199
8、 Rotation Angle Setting
When the array method is
set at “Horizontal” or “Vertical”,
user can set the rotation angle of
the letter. Press the “Rotation” to
enter the interface for setting
rotation angle.
The rotating direction is
counter-clockwise. Range:
0°~359°.
[Note]: When the array
method is arc (Upper Arc or
Down Arc), this button is to set
whether the letter rotates with
the arc.
9、 Follow/Not Follow
When the array method is
arc (Upper Arc or Down Arc),
user can set whether the letter
rotates with the arc. Press
“Follow” to shift it to “Not
Follow”, vice versa.
[Note]: when the array method
is “Horizontal” or “Vertical”,
this button is to set the
rotating angle.
10、 Add Auto-Trimming
In default setting, the
system will add auto-trimming,
which is to add trimming code at
the end of sewing, joint of empty
feeding (or sewing).
Press “Trim” to change the
content on button and cancel the
function for automatically
adding trimming functions.
4XX Pattern Sewing Machine (Touch Panel H) Operation Instructions
200
11、 Confirm the Pattern
Set the letter sewing pattern
for generation. Press to
enter the interface for adjusting
the letter sewing pattern.
2.10.2 Adjustment of Letter Sewing Pattern
In the interface for setting parameters of the letter sewing, user can press to enter the
interface for adjusting the letter sewing pattern. In this interface, user can have the further
adjustment on the pattern.
Functions：
No. Functions Content
A Font Selection
Change the font of selected letter. The setting method is the same as
that in Parameter Setting.
B Scale in Height
Scale the height of the selected letter. The setting method is the same as
that in Parameter Setting.
C Scale in Width
Scale the width of the selected letter. The setting method is the same as
that in Parameter Setting.
D X Position Display the X coordinate of center point of the selected letter
E Y Position Display the Y coordinate of center point of the selected letter
F X Size Display the width of the selected letter
G Y Size Display the height of the selected letter
Operation Instructions 4XX Pattern Sewing Machine (Touch Panel H)
201
H Pattern Display
Display the current pattern for letter sewing. The selected letters are
displayed in red; the unselected letter is displayed in green.
I Direction Key Adjust the position of the selected letter.
J Esc Return to the previous interface
K
Previous Letter
(from right to
left)
Select the letter for adjustment from right to left. The selected figure is
displayed in red. When the icon still goes to left at selecting the last
letter, the entire letters will be selected.
L
Next Letter
(from left to
right)
Select the letter for adjustment from left to right. The selected figure is
displayed in red. When the icon still goes to right at selecting the last
letter, the entire letters will be selected.
M
Left Tilt/Radian
Down
When the array method is horizontal array or the vertical array, this
button will display “Left Tilt”. Pressing this button will rotate the entire
pattern counterclockwise in the center of origin
When the array method is arc, this button will display “Radian Down”.
Pressing this button will reduce the radian of entire pattern.
[Note] This operation is for the entire pattern.
N
Right
Tilt/Radian Up
When the array method is horizontal array or the vertical array, this
button will display “Right Tilt”. Pressing this button will rotate the
entire pattern clockwise in the center of origin
When the array method is arc, this button will display “Radian Up”.
Pressing this button will increase the radian of entire pattern.
[Note] This operation is for the entire pattern.
O Left Rotation
Adjust the rotating angle of the selected letter counterclockwise. The
rotation center is the center of the letter
P Right Rotation
Adjust the rotating angle of the selected letter clockwise. The rotation
center is the center of the letter
Q Enter Press it to Enter the pattern save interface
Example：
1、 Select Single Letter for
Adjustment
Press “Previous Letter”
or “Next Letter” to select the
single letter for adjustment.
The selected letter is
displayed in red, while the
unselected are displayed in
green
4XX Pattern Sewing Machine (Touch Panel H) Operation Instructions
202
2、 Letter Position
Adjustment
Press direction keys to
adjust the position of the
selected letter. User can see
the coordinates from “X
Position” and “Y Position”
With the same
operations, user can adjust the
position of other letters.
3、 Adjust the Rotating
Angle of Entire Pattern
Press “Left Tilt” or
“Right Tilt” to adjust the
rotating angle of the entire
pattern
“Left Tilt”:
Counter-clockwise Rotation
“Right Tilt”: Clockwise
Rotation
[Note]: When the array
method is arc, these buttons
will turn to “Radian Up”/
“Radian Down”, which are
to adjust the radian of the
entire pattern
4、 Rotation of Single
Letter
Select a letter and then
press “Left Rotation” or
“Right Rotation” to adjust the
rotating angle of the selected
letter
[Note] When adjusting the
rotating angle, user had
better adjust the rotating
angle of the entire pattern
at first. If user adjust the
Operation Instructions 4XX Pattern Sewing Machine (Touch Panel H)
203
rotating angle of the single
letter at first, the
adjustment will be canceled
when user rotates the entire
pattern.
5、 Save Pattern
After the adjustment,
press to enter interface
for saving patterns.
Input name and number,
and then press . The
system will display “Letter
Sewing Pattern Saved
Successfully”. (For other
operations, please refer to [2.6
Save Pattern].)
[Note] After the successful
saving, the letter sewing
pattern will not turn to
current pattern
automatically. User has to
enter the pattern loading
interface to select it.
4XX Pattern Sewing Machine (Touch Panel H) Appendix 1
204
3 Appendix 1
3.1 Warning Information List
Number
Name of
Malfunction
Sub-information
Content
Solution
E-001
Pedal not at normal
position
Please adjust pedal
position
E-002
Machine is in
emergency stop
Check the condition of
emergency switch
Turn and release the emergency
button. If the screen keep displaying
this hint, please check in the
following way:
4、 Check the condition of
emergency button.
5、 Check the connection between
the emergency button and head
transfer board.
6、 Check the connection between
the X9 terminal on cable L433 and
the head transfer board. Open cable
L433 to seek breakage.
E-004
Main voltage is too
low (300V)
Please turn off power
and check system
hardware
1. Check if the AC power supply has
abnormal fluctuation; Make sure
there is no high-power device
that is turned on/off frequently;
equip the voltage regulator.
2. If the AC power supply is normal,
the problem may be at the
hardware. Please return the main
control board for repair.
E-005
Main voltage is too
high (300V)
No
E-007
IPM is over-voltage
or over- current
Please turn off power
and check system
hardware
3、 Make sure no short circuit at
main motor; check if the value of
each winding is equal and not 0；
4、 Check whether the output at
U\\V\\W is shorted out to earth or the
300V power supply, so as to judge
the condition of IPM.
E-008
Voltage of assistant
device (24V) is too
high
Please turn off power
and check system
hardware
3、 Check if the peripheral
solenoids and valves are shorted.
4、 Make sure the cores in both
plugs on L478 cable are not shorted.
Check whether the head transfer
board is shorted out to head at
installation
E-009
Voltage of assistant
device (24V) is too
low
Please turn off power
and check system
hardware
5、 Check if the peripheral
solenoids and valves are damaged
6、 Check whether cores in both
plugs on L478 (For Hai Ling, it is
L432) cable are shorted.
7、 Check whether the head transfer
board is shorted to head at
Appendix 1 4XX Pattern Sewing Machine (Touch Panel H)
205
Number
Name of
Malfunction
Sub-information
Content
Solution
installation.
8、 Check the power part at the
main control board; check the pin on
CPU for collecting 24V power
signal
E-010
Valve (Fan) has
problem
Please turn off power
and check system
hardware
1. Check whether the power of fan
has problem
2. Check the condition of 24V for
head board
3. Search short connecting at
peripheral valve
E-013
Encoder is error or
unconnected.
Please turn off power
and check system
hardware
1. Turn off the machine and check
the connection between the encoder
cable and the plug at control box.
E-014
Motor running
abnormal
Please turn off power
and check system
hardware
6、 Check whether the main shaft is
blocked by the load.
7、 Turn the hand wheel and
repower the machine when the main
shaft is at another angle.
8、 Motor reply signal error, replace
motor
E-015
Exceeds sewing
area
Please press Enter.
1. Pattern data process is
abnormal. Re-pick the pattern and
search the origin for sewing again.
Make sure the problem is at pattern
or caused by BUG in software.
2. Check whether the sewing
range set in operation head matches
to the selected pattern.
E-016
Needle bar Upper
position abnormal
Please press Enter.
Turn the hand wheel to lift the
needle bar to the upper position of
the upper dead point, and then step
the pedal.
E-017
Thread breakage
detection error
Please press Enter.
Check CZ424 port on head transfer
board and cable L433.
E-018
Trimmer position
abnormal
Please turn off power.
E-019
Emergency switch
is not at the right
position
Check the condition of
emergency switch.
1. It is common hint, not the
problem. Please release the
emergency switch.
2. Refer to the solution in EB002
E-020
Stepping software
version error
Please turn off power.
E-023
Thread-catching
position abnormal
Please turn off power.
E-024
Wrong connection
between operation
head and sewing
machine
Please turn off power.
4XX Pattern Sewing Machine (Touch Panel H) Appendix 1
206
Number
Name of
Malfunction
Sub-information
Content
Solution
E-025
X origin detection
abnormal
Please turn off power.
7、 Use debugging function to
move the frame manually and test
whether the coupler signal is
displayed;
8、 When the machine is on, user
can use a piece of metal sheet to
approach the proximity switch. This
is to test whether the system can
give the vocal warning.
9、 Adjust the installation position
of the proximity switch to ensure its
reliable actions.
10、 Test the working
condition of the stepping motor and
make sure they have no step missed;
11、 Test the conditions of the
stepping cables and sensor cables
12、 Check the connection of
L433 cable, make sure this cable has
no short or breakage at the
connectors at both ends
E-026
Y origin detection
abnormal
Please turn off power.
E-027
Presser origin
detection abnormal
Please turn off power.
E-028
Thread-catching
origin detection
abnormal
Please turn off power.
E-029
Intermediate
presser origin
detection abnormal
Please turn off power.
E-030
Stepping driver
communication
abnormal
Please turn off power.
3、 Check the connection of cable
between the main control board and
the stepping board
4、 Make sure the stepping board
power is normal or not. Ensure the
power indicator and the working
indicator are sparking normally
E-031
Stepping motor
over-current
Please turn off power.
3、 The stepping motor is broken;
user needs to replace the stepping
motor
4、 The stepping drive board is
broken; user needs to replace the
stepping drive board
E-032
Stepping driver
power abnormal
Please turn off power.
E-034 Abnormal current Please turn off power. 6、 Turn off the power. Turn the
hand wheel to test the running of the
main shaft. Check whether any
mechanism is blocked.
7、 Turn off the power. Check the
connection at the coupling of the
main shaft motor. The large interval
at the coupling will cause the
over-current at the motor
8、 Turn off the power. Measure
whether the resistance values at the
three-phase resistance are equal. If
not, the motor is down.
9、 Turn off the power. Use the
multimeter to test the IPM module,
if IPM is down, please do not
repower the machine. User needs to
E-035
IPM over current
frequently 1
Please turn off power.
E-036
IPM over current
frequently 2
Please turn off power.
Appendix 1 4XX Pattern Sewing Machine (Touch Panel H)
207
Number
Name of
Malfunction
Sub-information
Content
Solution
replace or repair it.
10、 When the system gives
warning, please make sure whether
the machine is at the process of
trimming or stop. If so, please adjust
the main shaft parameters to solve
this problem.
E-037 Motor is blocked 1 Please turn off power.
6、 Due to the wrong location of the
main shaft angle, the trimmer is
jammed on the needle when cutting
the thread, thus causes the main
shaft to be blocked. Solution:
Relocate the main shaft angle
7、 The needle rod is jammed on
the intermediate presser at moving,
which causes the blockage of the
main shaft. Solution: check the
action of the intermediate presser
and the connection between the air
valve and the solenoid valve.
8、 The trimmer can’t cut the thread
due to lacking of strength, which
causes the blockage of the main
shaft. Solution: adjust the main shaft
parameter and increase the strength
of trimming.
9、 The mechanism has dead point,
so the main shaft is blocked.
Solution: adjust the mechanism;
10、 The encoder at the main
shaft motor has problem, which
responses the wrong signal, thus
causes the blockage of the motor.
Solution: replace the main shaft
motor
E-038 Motor is blocked 2 Please turn off power.
5、 The used fabric is too thick to
be penetrated by the needle.
Solution: adjust the main shaft
parameters or change to a motor
with larger power capacity;
6、 The needle rod is jammed on
the intermediate presser at moving,
which causes the blockage of the
main shaft. Solution: check the
action of the intermediate presser
and the connection between the air
valve and the solenoid valve
7、 The mechanism has dead point,
so the main shaft is blocked.
Solution: adjust the mechanism
8、 The encoder at the main shaft
motor has problem, which responses
the wrong signal, thus causes the
blockage of the motor. Solution:
4XX Pattern Sewing Machine (Touch Panel H) Appendix 1
208
Number
Name of
Malfunction
Sub-information
Content
Solution
replace the main shaft motor
E-039 Motor over speed Please turn off power.
E-040
Over current in
stop status
Please turn off power.
E-041 Motor overload Please turn off power.
E-042
Bus voltage
abnormal
Please turn off power.
E-043
X stepping motor
position error
Please turn off power.
E-044
Y stepping motor
position error
Please turn off power.
E-045 Presser not down Step the pedal
E-046
Not at origin
cannot operate
Press key to return to
origin
E-047 Motor overload 1 Please turn off power.
E-048 Motor overload 2 Please press Enter.
E-049 Motor overload 3 Please turn off power.
3.2 Hint Information List
No. Name Content of Sub-information
M-001 Up counter reaches set value Press Enter
M-002 Down counter reaches set value Press Enter
M-003 Not at origin, cannot operate Return to origin firstly
M-004 Pattern data not exist Please reload or input again
M-005 Set value is too large Please input value within valid range
M-006 Set value is too small Please input value within valid range
M-007 Please press “Return to Origin”
M-008 Save parameter abnormal Press Enter to restore the default values
M-009 Cannot find pattern in memory Press Enter to load the default patterns
M-010 Memory full Please delete the idle sewing data
M-011 Delete pattern data from memory? No
M-012 Replace pattern data in memory? No
M-013 Can not delete pattern data. The selected sewing data is being used
M-014 Format memory?
All the patterns within the memory will be
deleted
M-015 Communication error
Abnormal event occurs in the
communication between the operation head
and the control box. Please turn off power
and check it
M-016 Beyond sewing range Make sure pattern data is in sewing range
Appendix 1 4XX Pattern Sewing Machine (Touch Panel H)
209
No. Name Content of Sub-information
M-017 Fail to load letter sewing file No
M-018
Operation head not match to machine
type
Please check the model and the software
version
M-019 Low memory Please delete the unused pattern data
M-020 Wrong pattern number Please input the right pattern number
M-021 Beyond max stitch interval No
M-022 Wrong password Please input password again
M-023 Hardware clock error
The hardware clock has problem, please
contact manufacturer for repair.
M-024 Stitch number beyond range Please reduce stitch number
M-025 Inputted stitch interval is too low Please input value within valid range
M-026 Inputted stitch interval is too low Please input value within valid range
M-027 Offset origin existed User can only input one offset origin.
M-028 Fast move is set too much or little Please input value within valid range
M-029 Please press Return to Origin No
M-030 Copy the pointed pattern? No
M-031 Copy all pattern data? No
M-032 Restore to default setting? No
M-033 USB is pulled out U Disk Is Pulled Out！
M-034 Cannot find pattern data in U disk No
M-035 At least input one letter
At making pattern of letter sewing, user has
to input at least one letter
M-036 No alarm record
M-037 Replace needle
Reach set value for needle replacement,
please replace needle!
M-038 Replace oil
Reach set value for oil replacement, please
replace oil!
M-039 Clean machine
Reach set value for cleaning machine,
please clean machine!
M-040 Different data format Please confirm the data format
M-041 Cannot create curve
Please input again according to the
standards of curve input.
M-042 Cannot insert trimming at current position Please add trimming behind sewing data
M-043
Cannot add same function code in one
position
M-044
Cannot insert offset origin at current
position Please add offset origin after feeding
M-045
Cannot create arc or circle at the inputted
point Please input again
M-046 Cannot create overlapped sewing data
Please add overlapped sewing after close
shape
M-047 Cannot insert trimming after down pause No
4XX Pattern Sewing Machine (Touch Panel H) Appendix 1
210
No. Name Content of Sub-information
M-048
Cannot insert down pause before
trimming
No
M-049 Not find offset sewing data
Function of offset sewing data transfer is
unavailable
M-050 Not find multi-sewing data
Function of multi-sewing data transfer is
unavailable
M-051 Select wrong position No
M-052 Cannot scale No
M-053 Distance over 12.7mm No
M-054 Wrong pattern data No
M-055 Create arc? No
M-056 Create circle? No
M-057 Create curve? No
M-058 Create polygon? No
M-059 Presser is not down Please step pedal
M-060 Wrong User ID Please input again
M-061 Fail to conform password Please input password again
M-062 Cannot change system time
The periodical password is set. Can not
change system time.
M-063 Fail to save password file No
M-064 Fail to load password file No
M-065 Password saved successfully No
M-066 Fail to clear all passwords Cannot delete password file
M-067 Fail to clear password
After the password is cleared, the file input
becomes abnormal
M-068
Password file is deleted without
authorization
Periodical password is deleted without
authorization, please turn off machine
M-069 User ID file damage
M-70 Input pattern name
Please input pattern name no more than 8
figures
M-71 Please clear current combination data
Press “CLR” to delete current combination
data
M-72 Empty input invalid Can not input empty password
M-73 Password not match Current password is wrong
M-74 New password is different.
New password is different from the retry
password
M-75 Touching panel correction successful
Correction is successful. Please turn off
power to restart.
M-76 Clear alarm records? Yes: Enter No: X
M-77 Delete the selected file? Yes: Enter No: X
M-78 Copy all patterns
Cover the original patterns?
Yes: Enter No: X
Appendix 1 4XX Pattern Sewing Machine (Touch Panel H)
211
No. Name Content of Sub-information
M-79 Fail to copy file Please check the space in memory
M-80 Fail to copy file Please check if the USB disk is pulled out!
M-81 Fail to open file Fail to open file
M-82 Format not match Formats don’t match, current load denied
M-83 Parameter over range
Parameter is over range. After confirmation,
the parameter over range will be restored
according to the default parameters!
M-84 Please create catalogue and file
Please create catalogue bakParam in U disk.
Name the back-up file as backup.param and
copy it to bakParam catalogue！
M-85 File I/O error File I/O error
M-86 Please select file Select the file for input/ output
M-87 File not exist Cannot find the corresponding file
M-88 Not input move amount Please input move amount
M-89 Enter touching panel correction mode? Yes: Enter No: X
M-90 Clear accumulated running time? Yes: Enter No: X
M-91 Clear accumulated sewing pieces? Yes: Enter No: X
M-92 Clear accumulated power-on time? Yes: Enter No: X
M-93 Clear accumulated stitch numbers? Yes: Enter No: X
M-94
Periodical passwords can’t be same to
super password Please input password again
M-95 Cannot change up counter (NUP) At change, please turn off setting (NUP)
M-96 Cannot change down counter (NDP) At change, please turn off setting (NUP)
M-97 Pattern list (hotkey) is empty
If the pattern list is empty, the system will
automatically input the current pattern to list
M-98 Not select update item
Please select item for updating. At least
select one item
M-99 Some selected update items don’t exist.
The item not existing will be cancelled after
return. For updating the rest items, please
confirm again
M-100 Update successful Update is successful, please restart machine.
M-101 Format U Disk?
Press Enter to perform formatting operation.
Press Esc to quit current operation. After
formatting, all pattern files will be deleted.
M-102 Can not find U disk Please insert the U disk for formatting.
M-103 Successful Current operation is successful!
M-104 Failed Current operation is failed!
M-105 Format pattern list (hotkey)?
Press Enter to perform formatting operation.
Press Esc to quit current operation
M-106
Cover the pattern with same name in U
disk?
Press Enter to cover files. Press Esc to quit
current operation
M-107 Fail to correct touching panel Please perform correction again
4XX Pattern Sewing Machine (Touch Panel H) Appendix 1
212
No. Name Content of Sub-information
M-108 Letter sewing pattern saved successfully
Please enter pattern loading interface to
select newly created letter sewing pattern
M-109
The selected pattern is not normal format,
please transform.
Press Enter to perform transforming
operation. Press Esc to quit current
operation
M-110 Cannot transform this pattern Please confirm pattern
M-111 Restore all the settings? Yes: Enter No: X
M-112 Restore the selected item? Yes: Enter No: X
M-113 Not select item Please select one or more parameters
M-114 SRAM initialization
Clear all data in SRAM. Please turn off
power and restore the setting of DIP switch.
M-115 Cannot copy and cover current pattern
Current pattern number in copy group,
system cannot cover it.
M-116 Need transform pattern format
After transforming, user can preview the
pattern
M-117
Cannot perform operation to combined
pattern
Please enter pattern connection mode, press
“CLR” to cancel the combined pattern
M-118 Delete original pattern?
Delete original pattern after format
transforming?
Yes: Enter No: X
M-119 Intermediate presser in down position Please lift intermediate presser
M-120 Turn off machine, Bye No
M-121
Format of pattern with 20mm stitch
interval
Not support this pattern format in this
system
M-122 Wrong transformed pattern format Please confirm pattern
M-123 Transformed pattern data is too long Please confirm pattern
M-124 Cannot open transformed pattern Please confirm pattern
M-125 Wrong accuracy of transformed pattern Please confirm pattern
M-126 Parameter recovery successful
Parameter recovery is successful, please
restart machine
M-127 Software version saving successfully
Software version is saved to the base
catalogue of U disk successfully
Appendix2 4XX Pattern Sewing Machine (Touch Panel H)
213
4.Appendix 2
4.1Installation Size of Control Box
1、Installation Size of Control Box
Figure 1 Installation Size (4 Holes)
1、 MAS41X/MASC44X Installation Size of Control Box
4XX Pattern Sewing Machine (Touch Panel H) Appendix2
214
4.2 External Cable Connection of Control Box
MAS41X/MASC44X Control Box Back Wiring Interface Diagram
Appendix2 4XX Pattern Sewing Machine (Touch Panel H)
215
4.3 Installation Size of Control Panel
Figure 2 Installation Size of Control Panel
4XX Pattern Sewing Machine (Touch Panel H) Appendix2
216
4.4 Diagram and Cable Connection
1、HSC41X Diagram
Appendix2 4XX Pattern Sewing Machine (Touch Panel H)
217
2 、MASC41X Diagram
4XX Pattern Sewing Machine (Touch Panel H) Appendix2
218
3 、MASC44X Diagram
Appendix2 4XX Pattern Sewing Machine (Touch Panel H)
219
4.5 Cable Connection
1、HSC41X Cable Connection
Socker Functions Pin definitions
L627（White） Presser Pneumatic Valve 1+，2-
L627（Yellow）
Feeding Frame
Pneumatic Valve
1+，2-
L627（Blue）
Trimming Pneumatic
Valve
1+，2-
L627（Black） Wipe Solenoid 1+，2-
L627（Red）
Thread releasing
Solenoid 1+，2-
L627（White） Trimming Solenoid 1+，2-
L628（White） Auxiliary 1+，2-
L628（Yellow） Emergency Stop 1+，2-
L628（Black） Safety Switch 1+，2-
L628（White） X Origin 1-，2，3+
L628（Yellow） Y Origin 1-，2，3+
L628（Red） Z Origin 1-，2，3+
L628（Black）
Thread Breakage
Detection
2
L659（Yellow/White/
White/Black/Blue/White）
Auxiliary Pneumatic
1/2/3/4/5/6 1+，2-
L659（Red） LED Light 1+, 2-
2、MASC41X Cable Connection
Socker Functions Pin definitions
L758（Yellow） Emergency Stop 1+, 2-
L758（Black） Safety Switch 1+, 2-
L758（Black）
Thread Breakage
Detection
2
L758（White） X Origin 1-，2，3+
L758（Yellow） Y Origin 1-，2，3+
L758（Red） Z Origin 1-，2，3+
L759（White）
Feeding Frame
Pneumatic Valve
1+, 2-
L759（Yellow）
Presser Pneumatic
Valve
1+, 2-
L759（Blue）
Trimming Pneumatic
Valve
1+, 2-
L759（Red） LED Light 1+, 2-
L759（White） Auxiliary Pneumatic 1+, 2-
4XX Pattern Sewing Machine (Touch Panel H) Appendix2
220
Valve 2/3
L760
（Yellow/Black/Blue/White）
Auxiliary Pneumatic
Valve 1/4/5/6
1+, 2-
L760（White） Auxiliary 1+, 2-
L760（Black） Wipe Solenoid 1+, 2-
L760（White） Trimming Solenoid 1+, 2-
L760（Yellow）
Thread releasing
Solenoid
1+, 2-
3、MASC44X Signal Transform-connecting Board Connection
SC0413 Signal Transform-connecting Board
Socker Functions Pin definitions
CZ134 Emergency Stop 1+，2-
CZ139 Safety Switch 1+，2-
CZ1313 Thread Breakage Detection 2
CZ1317/1321/1327
/1316/1320
Input 1/2/3/4/5 1-，2，3+
CZ133 X Origin 1-，2，3+
CZ138 Y Origin 1-，3，4+
CZ1312 Z Origin 1-，2，3+
CZ1326 Auxiliary Pneumatic Valve 1+，2-
CZ135 Presser Pneumatic Valve 1+，2-
CZ137 Feeding Frame Pneumatic Valve 1+，2-
CZ1310 Trimming Pneumatic Valve 1+，2-
CZ1314 Trimming Solenoid 1+，2-
CZ136 Wipe Solenoid 1+，3-
CZ1311 Thread releasing Solenoid 1+，3-
CZ1315 LED Light 1+，2-
CZ1319/1323/1325
/1318/1322/1324
Valve 1/2/3/4/5/6 1+，2-
