该页无缩略图
Commercial vehicle solutions
Vehicle controls
Dimensions
Approximate dimensions in inches (mm)
aC/DCRated(Mediumduty)MIL-83731Switches
AC Rated (Heavy duty)MIL-83731 Switches withleverseal
Single-Polemaintainedandmomentaryaction
Two-Polemaintainedaction
Commercial vehicle solutions
Vehicle controls
Approximatedimensionsininches(mm)
AC Rated (HeavyDuty) MIL-83731 leverlock switcheswithLeverSeal
AC Rated (Heavy Duty)
Single-Pole
Two-Pole
2PDT Momentary action
Commercial vehicle solutions
Vehicle controls
General purpose toggles
Product description
TheseACrated toggleswitchesoffer thewidestselectionoffeaturesandthe design flexibility to meet a variety of applications.
Features
Theoptionalfeaturesshownbelow may not be available on all toggle models.Contact your local EatonSalesRepresentative.
7500,7600,7700and7900Series
·3-independent ON Circuit (2PDT or 4PDT only, see Page 206)
· Short (11/32 in) bushing
·Tall (15/32 in) bushing
·White nylon designer lever, see Dimensions onPage 208
·Black nylon designer lever, seeDimensionsonPage208
·Reversing jumpers (not for use with 3-independent ON circuit)
·Short(15/32in)batlever
·Tall(11/16 in)bat lever(not available with short bushing)
·Rotate keyway 180°
·Lever seal
·Omit one pole (2P,3P, 4P only.Not fc usewith3-independentONcircuit)
7800 Series Only
·3-independentONcircuit(2PDTor 4PDT only, See Page 206)
·Reversing jumpers (Not for use with 3-independent ON circuit)
·Rotate keyway 180°
· Silicone lever seal (1P and 2P only)
·Omit one pole (2P 3P, 4P only. Not for use with 3-independent ON circuit)
Options
Combi-Term option
ThisisanextensionofourACrated generalpurposetoggleswitch. The"Combi-Term"design allows the user theoptionofscrewterminals, 0.25 in quick connects or solder termination allon the same switch. Thespecial clips and screws are provided in apolybag withthe switch.
Circuits
·1PST,1PDT,2PST,2PDT,3PST,3PDT, 4PST and 4PDT ·Maintained and momentary
Standards and certifications
·UL Recognized ·CSA? Certified · (except as noted) ·RoHS Compliant
Commercial vehicle solutions
Vehiclecontrols
Productselection
| Circuit with lever in.. UP CENTER DOWN | Catalog number | ||||||||||
| Position | Position | Position | Base circuit | Bushing | Lever | 0.250 in | |||||
| Rating 6A,125Vac | and throw | (Keyway) | see | length"A" Page222 inches (mm) | length“B" inches (mm) | Solder lugs | Screw terminals | Spade terminals | |||
| 3A,250 Vac | 1PST | ON | NONE | OFF | A | 0.344 (8.74) 0.469 (11.91) | 0.563 (14.30) 0.563 (14.30) | 7580K7 7580K6 | 7580K5 7580K4 | 7580K9 7580K8 | |
| 1PDT | ON | OFF | ON | B | 0.469 (11.91) | 0.563 (14.30) | 7581K6 | 7581K4 | 7581K8 | ||
| 1PDT | ON | NONE | ON | B | 0.469 (11.91) | 0.563 (14.30) | 7582K6 | 7582K4 | 7582K8 | ||
| 1PDT | ON MOM. ON | NONE OFF | MOM. ON MOM.ON | B | 0.469 (11.91) | 0.563 (14.30) | 7585K6 7587K6 | 7585K4 7587K4 | 7585K8 7587K8 | ||
| 10A,250 Vac 1/2 hp, 250 Vac | 1PST | OFF | NONE | MOM. ON | A | 0.469 (11.91) | 0.563 (14.30) | 7506K3 | 7506K4 | 7506K6 | |
| 1PST | OFF | NONE | MOM. ON | A | 0.469 (11.91) | 0.688 (17.48) | 7506K38 | 7506K36 | 7506K40 | ||
| 1PDT | MOM. ON | OFF NONE | MOM. ON MOM.ON | B | 0.469 (11.91) | 0.563 (14.30) | 7509K4 7510K6 | 7509K5 7510K7 | 7509K7 7510K9 | ||
| 1PDT | ON ON MOM. | OFF OFF | MOM. ON MOM. ON | B | 0.469 (11.91) | 0.688(17.48) | 7508K38 7509K38 | 7508K36 7509K36 | 7508K40 7509K40 | ||
| 15A, 125 Vac 10A,250 Vac 3/4 hp, 250 Vac 1/2 hp, 125V Vac | 1PST | ON ON | NONE | OFF | A | 0.344 (8.74) 0.469 (11.91) | 0.563 (14.30) 0.563 (14.30) | 7501K12 7501K13 | 7500K13 7500K14 | 7501K14 7501K15 | |
| 15A, 125 Vac 10A, 250 Vac 1/2 hp, 125 Vac 3/4 hp, 250 Vac | 1PDT | ON | OFF | ON | B | 0.469 (11.91) | 0.563 (14.30) | 7503K13 | 7502K13 | 7503K15 | |
| 1PDT | ON | NONE | ON | B | 0.469 (11.91) | 0.563 (14.30) | 7505K4 | 7504K4 | 7505K6 | ||
| 20A, 125 Vac 10A,250 Vac 1/2 hp, 125 Vac | 1PST | ON | NONE | OFF | A | 0.469 (11.91) | 0.688(17.48) | 7546K38 | 7546K36 | 7546K40 | |
| 3/4 hp, 250 Vac 30A,125 Vac 25A, 250 Vac@ | 1PST | ON | NONE | OFF | A | 0.344 (8.74) | 0.563 (14.30) | 7576K2 | |||
Note:
Commercial vehicle solutions
Vehicle controls
Note:
| Poles | Circuit with lever in... UP | CENTER DOWN Position Position Position | Base | Catalog number | |||||||
| Rating 6A,125Vac 3A,250 Vac 2A,277 Vac | throw 2PST | ON | NONE | (Keyway) OFF | see C | Page 22 inches(mm) inches (mm) lugs 0.469 (11.91) | 0.563 (14.30) | 7590K6 | terminals 7590K4 | terminals 7590K8 | Term 一 |
| 2.5A,L at 125 Vac 6A, 125Vac | 2PDT | ON | OFF | ON | D | 0.469 (11.91) | 0.563 (14.30) | 7591K6 | 7591K4 | 7591K8 | |
| 3A, 250 Vac 2.5A, L at 125 Vac | 2PDT | ON | NONE | ON | D | 0.469 (11.91) | 0.563 (14.30) | 7592K6 | 7592K4 | 7592K8 | |
| 6A.125Vac 3A,250 Vac | 2PDT | MOM. | OFF | MOM.ON | D | 0.469 (11.91) | 0.563 (14.30) | 7597K6 | 7597K4 | 7597K8 | |
| 2PDT | ON ON | ON | OFF | 7530 | 0.469 (11.91) | 0.563 (14.30) | 7530K1 | 7530K3 | 7530K2 | ||
| 10A 250 Vac, 15A 125 Vac, 1/4 hp 125-250 Vac | 2PDT | ON | ON | ON | 7555 | 0.469 (11.91) | 0.563 (14.30) | 7555K12 | 7555K11 | 7555K13 | |
| 15A,125Vac 10A, 250 Vac 3/4 hp, 250 Vac | 2PST | ON | NONE | OFF | C | 0.344 (8.74) 0.469 (11.91) | 0.563 (14.30) 0.563 (14.30) | 7561K5 7561K4 | 7560K6 7560K5 | 7561K7 7561K6 | |
| 1/2 hp, 125 Vac 15A,125Vac 10A, 250 Vac | 2PDT | ON | OFF | ON | D | 0.344(8.74) 0.469 (11.91) | 0.563(14.30) 0.56 (14.30) | 7563K5 7563K4 | 7562K5 7562K4 | 7563K7 7563K6 | |
| 3/4 hp. 125-250 Vac 15A,125 Vac 10A, 250 Vac | 2PDT | ON | NONE | ON | D | 0.469 (11.91) | 0.563 (14.30) | 7565K5 | 7564K6 | 7565K7 | |
| 3/4 hp, 250 Vac 15A,125 Vac | 2PST | OFF | NONE | 0.469 (11.91) | 0.563(14.30) | 7566K4 | 7566K5 | 7566K7 | |||
| 10A, 250 Vac 1/2 hp, 250 Vac | 2PDT | ON | OFF | MOM.ON MOM.ON | C D | 0.469 (11.91) | 0.563(14.30) | 7568K3 | 7568K2 | 7568K4 | |
| MOM. ON | OFF NONE | MOM.ON MOM.ON | 7569K1 7570K4 | 7569K2 7570K5 | 7569K3 7570K7 | ||||||
| 2PDT | ON MOM. | OFF | MOM.OND | 0.469 (11.91) | 0.688(17.48) | ||||||
| 20A,125Vac | 2PST | ON | 7569K38 | 7569K36 | 7569K40 | ||||||
| 10A, 250 Vac 3/4 hp, 250 Vac | 2PDT | ON ON | NONE NONE | OFF ON | C D | 0.469 (11.91) 0.469 (11.91) | 0.688(17.48) 0.688(17.4) | 7630K38 7632K38 | 7630K36 7632K36 | 7630K40 7632K40 | |
| 1/2 hp, 125 Vac SectionA 10A 250 Vac; 15A 125 Vac, 3/4 hp 250 Vac, 4.2A L 125 Vac; | 2PDT | OFF | 10N | 2 ON | 7571 | 0.469 (11.91) | 0.563 (14.30) | 7571K2 | 7571K4 | 7571K6 | |
| SectionB 10A 250 Vac, 15A 125 Vac, 1/4 hp 250 Vac | |||||||||||
| 20A,125Vac 10A, 250 Vac | 2PST 2PDT | ON ON | NONE OFF | OFF ON | C D | 0.469 (11.91) 0.469 (11.91) | 0.688(17.48) 0.688(17.48) | 7803K11 7803K12 | 7803K31 7803K32 | 7803K21 7803K22@ | 7803K41 7803K42 |
| 1 hp, 120-240 Vac | ON | ON MOM. | NONE OFF | ON MOM.ON | 7803K13 7803K17 | 7803K33 7803K37 | 7803K23 7803K27 | 7803K43 7803K47 |
Commercial vehicle solutions
Vehicle controls
ACRatedtoggleswitches-Three-Pole
| Circuit with lever in... UP CENTER Position Position | DOWN Position | ||||||||||
| Rating | Poles and throw | 身 (Keyway) | Baseit see Page 222 | Bushing length"A" inches (mm) | Lever length“B" inches (mm) | Solder lugs | Screw terminals | 0.250 in Spade terminals | Combi- Term | ||
| 15A, 125 Vac 10A, 250 Vac 3/4 hp, 250 Vac 1 hp, 3 Ph | 3PST | ON | NONE | OFF | E | 0.469 (11.91) | 0.688 (17.48) | 7700K1 | 7700K2 | 7700K3 | |
| 125-600 Vac 1 hp, 1 and 2 Ph 125-480 Vac | 3PDT | ON ON | OFF NONE | ON ON | F | 0.469 (11.91) | 0.688 (17.48) | 7701K1 7702K1 | 7701K2 7702K2 | 7701K3 7702K3 | |
| 15A, 125 Vac 10A, 250 Vac 3/4 hp, 250 Vac | 3PDT | MOM. ON MOM. | OFF NONE | ON ON | F | 0.469 (11.91) | 0.688 (17.48) | 7704K1 7705K1 | 7704K2 7705K2 | 7704K3 7705K3 | |
| 20A, 125 Vac 10A, 250 Vac 1 hp, 120 Vac 1, 2 and 3 Ph | 3PDT | ON ON | OFF | ON | F | 0.469 (11.91) | 0.688 (17.48) | 7804K120 | 7804K32 | 7804K22 | 7804K42 |
ACRatedtoggleswitches-Four-Pole
Note:
| UP | Circuit with Lever in... | Catalog Number | |||||||||
| Poles | CENTER DOWN Position Position | Position | Base circuit | Bushing length"A" | Lever length"B" | 0.250 in | |||||
| Rating 15A, 125 Vac | and throw | see (Keyway) Page 222 (mm) | inches | inches (mm) | Solder lugs | Screw terminals | Spade terminals | Combi- Term | |||
| 10A, 250 Vac | 4PST | ON | NONE | OFF | E | 0.469 (11.91) | 0.688 (17.48) | 7691K14 | 7690K8 | ||
| 3/4 hp, 250 Vac | 4PDT | ON | OFF | ON | F | 0.469 (11.91) | 0.688 (17.48) | 7693K2 | 7692K13 | ||
| 20A, 125 Vac | ON | NONE | ON | 7695K5 | 7694K4 | ||||||
| 10A,250Vac | 4PST | ON | NONE | OFF | E | 0.469 (11.91) | 0.688 (17.48) | 7933K38 | 7933K36 | 7933K40 | |
| 3/4 hp, 250 Vac | 4PDT | ON | OFF | ON | F | 0.469 (11.91) | 0.688 (17.48) | 7934K38 | 7934K36 | 7934K40 | |
| 1/2 hp, 125 Vac 20A, 125 Vac | ON | NONE | ON | 7935K38 | 7935K36 | 7935K40 | |||||
| 10A,250 Vac 1 hp, 125240 Vac 2 and 3 Ph | 4PDT | ON | OFF | ON | F | 0.469 (11.91) | 0.688 (17.48) | 7805K12 | 7805K32 | 7805K22 | 7805K42 |
Commercial vehicle solutions
Vehicle controls
ACratedsealed ① toggle switches-Single-Pole
| Circuit with lever in ... | Catalog number | |||||||||
| UP Position | CENTER Position | DOWN Position | Biaseit | Bushing | Lever | 0.250 in | ||||
| Rating 10A, 250 Vac | throw 1PST | OFF | NONE | (Keyway) MOM.ON | see Page 222 | length"A" inches (mm) 0.469 (11.91) | length“B" inches (mm) 0.563 (14.30) | Solder lugs 一 | Screw terminals 7506K20 | Spade terminals 7506K21 |
| 1/2 hp, 250 Vac | 1PDT | A | ||||||||
| MOM.ON ON | OFF NONE | MOM.ON MOM.ON | B | 0.469 (11.91) | 0.563 (14.30) | 一 | 7509K20 7510K20 | 7509K21 7510K21 | ||
| ON | OFF | MOM. ON | —二 | 7508K20 | 7508K21 | |||||
| 1PST | ON | NONE | OFF | A | 0.469 (11.91) | 0.563 (14.30) | 7501K22 | 7500K20 | 7501K21 | |
| 3/4 hp, 250 Vac 1/2 hp, 125V-250 Vac 15A,125 Vac | 1PDT | |||||||||
| 10A, 250 Vac 1/2 hp, 125 Vac 3/4 hp, 250 Vac | 1PDT | ON ON | OFF NONE | ON ON | B B | 0.469 (11.91) 0.469 (11.91) | 0.563 (14.30) 0.563 (14.30) | 一 | 7502K20 7504K20@ | 7503K21 7505K21 |
ACratedsealed ① toggleswitches-Two-Pole
| Circuit with lever in ... CENTER | Catalog number | |||||||||
| UP Position | Position | DOWN Position | 0.250 in | |||||||
| Poles and throw | (Keyway) | Baseit see Page 222 | Bushing length"A" inches(mm) | Lever length "B" inches (mm) | Solder lugs | Screw terminals 7560K20 | Spade terminals 7561K21 | |||
| 15A,125Vac 10A, 250 Vac 3/4 hp, 250 Vac 1/2 hp, 125 Vac | 2PST | ON | NONE | OFF | C | 0.469 (11.91) | 0.563 (14.30) | 一 | ||
| 15A,125Vac 10A, 250 Vac 3/4 hp, 125-250 Vac | 2PDT | ON | OFF | ON | D | 0.469 (11.91) | 0.563 (14.30) | 一 | 7562K20 | 7563K21 |
| 15A, 125 Vac 10A, 250 Vac 3/4 hp, 250 Vac | 2PDT | ON | NONE | ON | D | 0.469 (11.91) | 0.563 (14.30) | 7564K20 | 7565K21 | |
| 15A, 125 Vac | 2PST | OFF | NONE | MOM.ON | C | 0.469 (11.91) | 0.563 (14.30) | 一 | 7566K20 | 7566K21 |
| 2PDT | OF NONE | OF NONE | M8M 8N MOM.ON | D | 0.469 (11.91) | 0.563 (14.30) | 二 | 7568K20 7570K20 | 756K2 0 7570K21 | |
ACRated special circuit toggle switches-Two-Pole
| Circuit with lever in... | Catalog number | |||||||||
| UP Position | CENTER Position | DOWN Position | 0.250 in | |||||||
| Rating 15A,125Vac | Poles and throw 2PDT | 2-3, 5-6 | OFF | (Keyway) 2-6, 5-3 | Biaseit see Page 222 D | Bushing length"A" inches(mm) 0.469 (11.91) | Lever length"B" inches(mm) 0.563 (14.30) | Solder lugs 7563K24 | Screw terminals 7562K23 | Spade terminals 7563K25 |
| 10A, 250 Vac 3/4 hp, 125-250 Vac 15A, 125Vac | ||||||||||
| 10A,250 Vac 3/4 hp, 250 Vac | 2PDT | 2-3, 5-6 | NONE | 2-6, 5-3 | D | 0.469 (11.91) | 0.563 (14.30) | 7565K24 | 7564K23 | 7565K25 |
Note:
Commercial vehicle solutions
Vehicle controls
Technical data and specifications
General purpose toggles-acrated
| Description | Specification |
| Ratings | See Product Selection tables;Switch ratings at 125Vac also apply to 28Vdc |
| Contact mechanism | Slow-make/slow-brake butt contact |
| Terminal types | Screw terminals—brass designed to accept #6-32x 3/16 binding head (Cat.No.811-2)screws Furnished unassembled Solder lug terminals—tintillate-plated brass Spade terminals—combi-term——brass |
| Base material Mounting means | Thermoset molding material Threaded bushing—0.468 in (11.89 mm) dia., 32 threads/in Keyway—0.068x 0.035 in(1.73 x 0.89 mm)deep,provides anti-rotation feature |
| Finish | Hardware supplied—1hexagon locknut (Cat.No.15-192)and1bright nickel-plated knurled facenut (Cat. No.15-124F1),except 77007705, which have bright nickel hexagon facenut (Cat.No. 15-966-2) Furnished unassembled |
| Dielectric withstand | Bright nickel-plated toggle lever and bushing |
| Operating temperaturerange | 1000V rms minimum 0° to 150°F (17.8° to 65.6°C) |
Contactmaterial
| Ampere | Movable | Stationary |
| 7500,7600,7700 and7900Series Switches | ||
| 3to6 | Silver-plated copper | Silver-plated copper |
| 10 to 20 | Silver-platedcopperwith silverbttons | Silver-plated copper with silverbuttons |
| 20 to 30 | Silver-plated copper with cad oxide buttons | Copper with cad oxide buttons |
| 7800SeriesSwitches | ||
| 3to6 | Silver-plated copper | Silver-plated copper |
| 10 to 20 | Copper with silver buttons | Copper withsilver buttons |
Dimensions
Approximate dimensionsininches (mm)
7500,7600,7700 and 7900Series
1PSTMaintainedandmomentary(screwterminals)
Commercial vehicle solutions
Vehicle controls
7500,7600,7700and7900Series,continued
Commercial vehicle solutions
Vehiclecontrols
Approximate dimensions in inches (mm))
7500,7600,7700and7900Series,continued
3PDTMaintainedandmomentary(Solderlugs)
Commercial vehicle solutions
Vehicle controls
7800 Series
2PDTMaintained(Screwterminals)
Commercial vehicle solutions
Vehicle controls
Product description
Thislineofswitchesemploys
a quick-make/quick-breakcontact
mechanism.The resultant high-speed movementeliminates the"teasing"
of the switch and reduces the pitting of the contact surfaces due to arcing. Self-cleaning andwiping contact action assurespositivecontactonswitch
operation.Theseswitches areespecially suited for use in small
motor applications.
Options
·Lever—11/16 in
·Lever seal
·Mounting hardware; furnished assembled
·Other lead lengths
Standards and certifications
·UL Recognized ·CSA Certified ·RoHS Compliant
Product selection
AC/DCRatedtoggleswitches-Single-Pole
Catalog number
| Poles | Base circuit see | Bushing Lever | ||||||||
| Rating | and throw | UP | CENTER | DOWN | length"B" inches (mm) | length"A" | Solder Screw | Wire leads | ||
| 3A,250 Vdc | Position | Position | Position | Page222 A | 0.344 (8.74) | inches (mm) 0.500 (12.70) | lugs | terminals | ||
| 6A,125 Vac/Vdc | 1PST | ON | NONE | OFF | 8280K115 | 8295K107 | 8290K115 | |||
| 3A, 250 Vdc | 1PST | ON | NONE | OFF | A | 0.344 (8.74) | 0.500 (12.70) | 8381K107 | 8396K107 | 8391K107 |
| ON | NONE | OFF | 0.469 (11.91) | 0.500 (12.70) | 8381K108 | 8396K108 | 8391K108 | |||
| MOM.ON | NONE | OFF | 0.469 (11.91) | 0.500 (12.70) | 8928K478 | |||||
| 1PST | ON | NONE | OFF | B | 0.469 (11.91) | 0.500 (12.70) | 8928K479 | |||
Productselection
AC/DCRatedtoggleswitches-Two-Pole
CatalogNumber
| Rating | Poles | Base circuit seePage | Bushing length“B" | Lever | ||||||
| and throw | UP Position | CENTER Position | DOWN | length"A" | Solder lugs | Screw terminals | Wire leads | |||
| 7A, 125V 3A, 250 Vdc | 2PST | ON | NONE | Position OFF | V11-T4-35 C | inches (mm) 0.469 (11.91) | inches (mm) 0.500(12.70) | 8370K107 | 8372K107 | 8371K107 |
| MOM. ON | NONE | OFF | 0.469 (11.91) | 0.500 (12.70) | 8928K481 | 8928K482 | ||||
| 2PDT | ON ON | NONE NONE | ON ON | D | 0.344 (8.74) 0.469 (11.91) | 0.500 (12.70) 0.500 (12.70) | 8373K108 8373K107 | 8375K108 8375K107 | 8374K108 8374K107 | |
Commercial vehicle solutions
Vehicle controls
Technical data and specifications
| Description | Specification |
| Ratings | See Product Selection table; Switch ratings at 125 Vac also apply to 28 Vdc |
| Circuits | 1PST, 1PDT, 2PST, 2PDT |
| Maintained andmomentary toggle action | |
| Contact mechanism | Quick-make/quick-break wiping action |
| Contact material | Bronze silver-plated |
| Terminal types | Screw terminals—-brass designed to accept #5-40 x 5/32 in (Cat.No.11-26) screws Furnished unassembled Solder lug terminals—brass silver-plated with 0.085-0.090 in (2.162.29 mm) dia.hole Integrated wire leads—18 gauge,6 in long and skinned 3/4 in Specialwireleadslengthsbeyond6inareavailableatadditionalcharge |
| Base material Mounting means | Thermoset molding material Threaded bushing—0.468 in (11.89 mm) dia., 32 threads/inch |
| Keyway—0.068 x 0.035 in (1.73 x.89 mm) deep, provides anti-rotation feature Hardware supplied—1 hexagon locknut (Cat. No. 15-192) and 1 bright nickel-plated knurled facenut (Cat. No. 15-124F1) | |
| Finish | Furnished unassembled Bright nickel-plated toggle lever and bushing |
| Operating temperaturerange | 0° to 150°F (17.8° to 65.6°C) |
Dimensions
Approximatedimensionsininches(mm)
8280K115 1PST Maintained (Solderlug)
8290K115 1PST Maintained (Wirelead)
8295K107 1PST Maintained (Screwterminals)
8381K107andK108 1PSTMaintained (Solderlug)
| "A" Lever Dim. | “B" Bushing Dim. | “C" Overall Dim. | "D" Throw Dim. |
| 0.500 | 0.344 | 1.411 | 29-1/2° |
| (12.70) | (8.74) | (35.84) |
| "A" Lever Dim. | “B" Bushing Dim. | "C" Overall Dim. | "D" Throw Dim. |
| 0.500 (12.70) | 0.344 (8.74) | 1.406 (35.71) | 29-1/2° |
| "A" Lever | “B" Bushing | “C" Overall | "D" Throw |
| Dim. | Dim. | Dim. | Dim. |
| 0.500 | 0.344 | 1.406 | 29-1/2° |
| (12.70) | (8.74) | (35.71) |
| "A" Lever | “B" Bushing | “C" Overall Dim. | "D" Throw Dim. |
| Dim. 0.500 (12.70) | Dim. 0.344 | 1.531 (38.89) | 29-1/2° |
| 0.500 | (8.74) 0.469 | 1.656 | 25-1/2° |
| (12.70) | (11.91) | (42.06) |
Commercial vehicle solutions
Vehicle controls
Approximate dimensions in inches (mm)
8391K107andK108 1PSTMaintained (Wire lead)
8396K107andK108 1PST Maintained (Screw terminals)
8928K478 1PSTMomentary (Solderlug)
| "A" Lever Dim. | “B" Bushing Dim. | “C" Overall Dim. | "D" Throw Dim. |
| 0.500 (12.70) | 0.344 (8.74) | 1.531 (38.89) | 29-1/2° |
| 0.500 | 0.469 | 1.656 | 25-1/2° |
| (12.70) | (11.91) | (42.06) |
| "A" Lever Dim. | “B" Bushing Dim. | “C" Overall Dim. | "D" Throw Dim. |
| 0.500 (12.70) | 0.344 (8.74) | 1.531 (38.89) | 29-1/2° |
| 0.500 | 0.469 | 1.656 | 25-1/2° |
| (12.70) | (11.91) | (42.06) |
| "A" Lever Dim. | “B" Bushing Dim. | “C" Overall Dim. | "D" Throw Dim. |
| 0.500 (12.70) | 0.344 (8.74) | 1.980 (50.29) | 29-1/2° |
| 0.500 | 0.469 | 1.656 | 25-1/2° |
| (12.70) | (11.91) | (42.06) |
Commercial vehicle solutions
Vehicle controls
8370and8373K107andK108 2PST/2PDTMaintained (Solderlug)
8371and8374K107andK1081PST Maintained(Wire lead)
8373and8375K107andK108 2PST/2PDTMaintained (Screw terminals)
| "A" Lever Dim. | “B" Bushing Dim. | “C" Overall Dim. | “D" Throw Dim. |
| 0.500 | 0.344 | 1.694 | 29-1/2° |
| (12.70) | (8.74) | (43.03) | |
| 0.500 (12.70) | 0.469 | 1.820 | 25-1/2° |
| (11.91) | (46.23) |
| "A" Lever Dim. | “B" Bushing Dim. | “C" Overall Dim. | “D" Throw Dim. |
| 0.500 | 0.344 | 1.484 | 29-1/2° |
| (12.70) 0.500 | (8.74) 0.469 | (37.69) 1.515 | 25-1/2° |
| (12.70) | (11.91) | (38.48) |
| "A" Lever Dim. | “B" Bushing Dim. | “C" Overall Dim. | “D" Throw Dim. |
| 0.500 | 0.344 | 1.484 | 29-1/2° |
| (12.70) | (8.74) | (37.69) | |
| 0.500 (12.70) | 0.469 | 1.609 | 25-1/2° |
| (11.91) | (40.87) |
Commercial vehicle solutions
Vehicle controls
XSeries toggles
Product description
Eaton's new,competitivelypriced, ACrated \mathsf{X} Series toggles offera standard highratingforboth singleand two-pole applications.The new \mathsf{X} Series toggle line offers a wide range of switching circuits,functions and accessories.Ratings for single-and twopole include20Aat125Vac and 10A at 277Vac to handle more severe inductive, motor and lamploads.
In addition, \mathsf{X} Series toggles have a high standard horsepower rating of 1-1/2 hp, 125-250 Vac for two-pole applications.
The easy-to-install toggles also have an industrystandard 0.48in diametermountinghole.Foradded convenienceanddeliverysupport, selectindustrystandardswitchcircuit part numbers are availablefrom stock. Withsomanyfeatures, \mathsf{X} Seriestoggles canbeused inavariety of applications.
Application description
·Commercialandindustrialequipment
·Household appliances
· Industrial machinery and automation
· Medical equipment
·Military communications and surveillance
·Rail systems
·Signaling and communications
·Test and lab equipment
·Telecommunications,cableand broadcasting
Standards and certifications
· UL Recognized component for Canada File E2702 ·RoHS Compliant
Commercial vehicle solutions
Vehicle controls
Product selection
| Poles and throw | UP Position | CENTER Position | DOWN Position | Terminal type—Catalog number | ||
| 0.250inSpade | Screw | Solder lugs | ||||
| 1PST | ON | NONE | OFF | XTD1A1A2 | XTD1A2A2 | XTD1A3A2 |
| 1PST | ON@ | NONE | OFF | XTD1F1A2 | XTD1F2A2 | XTD1F3A2 |
| 1PDT | ON | OFF | ON | XTD2B1A | XTD2B2A | XTD2B3A |
| 1PDT | ON | NONE | ON | XTD2C1A | XTD2C2A | XTD2C3A |
| 1PDT | ON | NONE | ON | XTD2D1A | XTD2D2A | XTD2D3A |
| 1PDT | ON | OFF | ON | XTD2E1A | XTD2E2A | XTD2E3A |
| 1PDT | ON | OFF | ON@ | XTD2G1A | XTD2G2A | XTD2G3A |
Two-Pole
Circuit with Lever in...
| Poles and throw | UP Position | CENTER Position | DOWN Position | Terminal type—Catalog number | ||
| 0.250inSpade | Screw | Solder lugs | ||||
| 2PST | ON | NONE | OFF | XTD3A1A2 | XTD3A2A2 | XTD3A3A2 |
| 2PST | ON· | NONE | OFF | XTD3F1A2 | XTD3F2A2 | XTD3F3A2 |
| 2PDT | ON | OFF | ON | XTD4B1A | XTD4B2A | XTD4B3A |
| 2PDT | ON | NONE | ON | XTD4C1A | XTD4C2A | XTD4C3A |
| 2PDT | ON | NONE | ON@ | XTD4D1A | XTD4D2A | XTD4D3A |
| 2PDT | ON@ | OFF | ON@ | XTD4E1A | XTD4E2A | XTD4E3A |
| 2PDT | ON | OFF | ON | XTD4G1A | XTD4G2A | XTD4G3A |
Note:
Commercial vehicle solutions
Vehicle controls
Accessories
See Accessories on Page 223.
Technical data and specifications
XSeriesToggles
| Description | Specification |
| Single-pole rating | 20A, 125 Vac; 10A, 277 Vac; 3/4 hp 125250 Vac; Recommended up to 15A at 28Vdc |
| Two-pole rating | 20A, 125 Vac; 10A, 277 Vac; 1-1/2 hp 125250 Vac; Recommended up to 15A at 28Vdc |
| Available circuits | 1PST, 1PDT, 2PST, 2PDT |
| Terminal types | Brass screw, brass solder lugs, brass nickel-plated 0.250 in spade |
| Hardware included | Zinc nickel-plated knurl nut, zinc nickel-plated hex nut |
| Mounting means | Threaded bushing 12.0 +0.1, 0 mm; 16.5 +1, -1 mm |
| Keyway | 1.8 mm located in DOWN position |
| Base material | Thermoset molding material |
| Finish | Bright nickel-plated toggle lever and bushing |
| Contact mechanism | Slow-make/slow-break butt contact |
| Contact resistance | 50 ohm maximum |
| Dielectric strength | AC 1500V,1 minute |
| Operating temperature | 32° to 149°F(0° to 65°℃) |
| Insulationresistance | DC 500V 100M ohm minute |
| Seal level rating | IP40 |
| Packaging | Sealed in polybag labeled with part number |
Commercial vehicle solutions
Vehicle controls
Dimensions
Approximate dimensions in inches (\mathsf{mm})
Single-Pole
Two-Pole
A 0.649±0.039 (16.50 ± 1.00)
B0.468±0.012 (11.90 ± 0.30)
C 0.677±0.019 (17.20 ± 0.50)
D 0.452 ± 0.019 (11.50 ± 0.50)
A0.649±0.039 (16.50 ± 1.00)
B0.468±0.012 (11.90 ± 0.30)
C0.740±0.019 (18.80 ± 0.50)
D0.452± 0.019 (11.50 ± 0.50)
Commercial vehicle solutions
Vehicle controls
Product description
One-hole panel mount
These heavy duty toggle switches are available in either two-or three-position. The three-position switches offer a uniquepositive center stopfeature, whichassuresthatthelevercannot bethrownfromoneside throughthe center OFF position without stopping. This design feature is a major factor in theirwidespreadacceptanceformotor reversing andspeed control applications.
The most common application for the switch is to help prevent motor damageresultingfrom thehighcurrent generationby counterEMFof the armature at the time of reversing. Thistypeofdevice isreferred to within the industry as an antiplugging, hesitation, positive stop or positive off switch.Typical applicationsinclude bench tools, coach and truck (electric lift) and X-ray equipment.
Flush mount
These three-position switches also offer thepositivecenterstopfeaturewhere thelevercannotbe thrownfromone side through the center OFF position without stopping. The high ratings of this seriesallowittobeusedwithabroad range of heavy duty applications. Copper contacts and brass screw terminals arestandard.
Standards and certifications
· UL Recognized (except where noted) · CSA Certified (where noted)
叫 G
Commercial vehicle solutions
Vehiclecontrols
Product selection
Heavydutyhesitationswitches-one-holepanelmount
Note:
Technical data and specifications
Heavydutyhesitationswitches
| Description | Specification |
| Ratings | See Product Selection tables;Switch ratings at 125 Vac also apply to 28 Vdc |
| Circuits | 2PDT, 3PDT, 4PDT; maintained action |
| Contact mechanism | |
| One-hole panel mount | AC rated devices—slow-make/Slow-break butt contact AC/DC rated devices——Quick-make/quick-break wiping contacts |
| Contact material One-hole panel mount | |
| AC rated devices: | |
| Movable—silver-plated copper with fine or coin silver contact face button | |
| Stationary—copper with fine or coin silver contact face button | |
| AC/DC rated devices: Movable—copper | |
| Terminal types | Stationary—bronze Screw terminals—-brass |
| Mounting means One-hole panel mount | AC rated devices: Threaded bushing—0.468 in (11.89 mm) dia., 32 threads/in Keyway—0.068 x 0.035 in(1.73 x0.89 mm) deep. provide anti-rotation feature Hardware supplied |
| Dielectric withstand | Furnished unassembled 1000V rms minimum |
| Operating temperaturerange | 0° to 150°F(-17.8° to 65.6°C) |
Commercial vehicle solutions
Vehiclecontrols
Dimensions
Approximate dimensionsininches(mm)
One-hole panel mount 7990K10-4PDT
Commercial vehicle solutions
Vehicle controls
Mounting hardware
Product description
One-holemountingswitches
All bushingmutdwitchesarefishedwithtmuntintnenmoutdbhindthpanepreventheushin sleevefrombeingdistortedifthefrotpanelisertightenedEatnaccptnreonsibityforamagetowithsmod without the backup nuts
Product selection
Mounting hardware for one-hole mounting switches-mounting nuts
| Thickness Dim."A" in | Inside diameter Dim “B" in | OD or Dimension acrossflats Dim."C" in | Dimension across corners Dim."D" in | Catalog | |||
| Size 3/8-27 | Description Hexagon locknut | Material Nickel-plated brass | inches (mm) 0.125 (3.18) | inches (mm) 一 | inches (mm) 0.562 (14.27) | inches (mm) 0.625 (15.88) | number 15-2526-2 |
| 3/8-24 | Brightnickel-plated brass | 一 | 15-1525-6 | ||||
| 11/32-32 | Nickel-plated brass | 0.063 (1.60) | 一 | 0.473 (12.01) | 0.531 (13.49) | 15-1525-2 | |
| 15/32-32 | Hexagon locknut | Zinc-chromate treated | 0.075 (1.91) | 二 | 0.625 (15.88) | 二 | 15-192 |
| Bright nickel-plated brass | 0.078 (1.98) | 0.546 (13.87) | 0.625 (15.88) | 15-2525-58 | |||
| Zinc-chromate treated | 0.188 (4.76) | 0.783 (19.89) | 1.125 (25.80) | 二 | 15-2528-2 | ||
| Hexagon facenut | Nickel-plated brass | 0.078 (1.98) | 二 | 0.562 (14.27) | 0.656 (16.66) | 15-966-2 | |
| Semi-lustre nickel-plated brass | 一 | 二 | 19-966-6 | ||||
| Knurled facenut | Bright nickel-plated brass | 0.066(1.68) | 一 | 0.562 (14.27) | 一 | 15-124F1 | |
| Black cupric oxide-plated brass | 一 | 15-124F5 | |||||
| Brass nickel-plated brass | 0. 109 (2.77) | 一 | 0.625 (15.88) | 一 | 15-90 | ||
| Chamfered dress nut | Bright nickel-plated brass | 0.151 (3.84) | 0.312(7.92) | 0.687 (17.45) | 一 | 15-994-2 | |
| Standard knurl nut with shoulder | Nickel-plated brass | 0.109 (2.77) | 一 | 0.593 (15.06) | 15-2534-14 | ||
| Dress nut | Satin chrome-plated brass | 0.125 (3.18) | 一 | 0.562 (14.27) | 一 | 15-2523-4 | |
| Black nylon | 0.187 (4.75) | 0.390 (9.91) | 0.640 (16.26) | 15-1048-3 | |||
| Knurled dress nut | Chrome-plated brass | 0.187 (4.75) | 0.312 (7.92) | 0.640 (16.26) | 二 | 15-189-5 | |
| 3/4-32 | Hexagon facenut | Nickel-plated steel | 0.093 (2.36) | 一 | 0.937 (23.80) | 1.078 (27.38) | 15-1043 |
| #8-40 | Hexagon locknut with facenut | Nickel-plated steel | 0.060 (1.52) | 一 | 0.245(6.2) | 0.216(5.49) | 15-1047 |
Commercial vehicle solutions
Vehicle controls
Mounting Washers and Locking Ring
| Insidediameter Dim“B" | ODor Dimension acrossflats Dim."C" | Dimenslon acrosscorners | Catalog | ||||
| Size For 15/32 bushing | Description Locking ing | Material Zinc-plated steel | Dim."A" 0.040 (1.02) | 0.475 (12.07) | 0.718 (18.24) | Dim."D" 一 | number 29-761-5 |
Dimensions
Approximate dimensions in inches (mm)
Mountinghardware
Note:
① Hardware items are sold for use with Eaton switches only.
Commercial vehicle solutions
Vehicle controls
Decorator facenuts
Productselection
| Type | Color | Catalognumber |
| Knurled facenuts | Bright black | 15-1048-3 |
| Bright clear | 15-1048-7 | |
| Beveled facenuts | Bright black | 15-1049-3 |
| Bright clear | 15-1049-7 |
Dimensions
Approximatedimensionsininches(mm)
Catalog number 15-1048
Panel seal
·Prevents moisture and contaminants from entering panel enclosure
·Behind panel mounting
·Stainless-steelcupwasher ensuresproper seating of siliconerubber seal
·Seal withstands 20psi waterpressure
·Cat.No.32-341
Dimensions-32-341
Commercial vehicle solutions
Vehicle controls
Replacement terminal screws
| Screwsize | Catalognumber |
| #5-40 × 1/8 in | 11-1117 |
| #5-40 x 5/32 in | 11-26 |
| #5-40 x 3/16 in binding head | 811-7206 |
| #5-40 x 1/4 in binding head | 811-14 |
| #6-32 x 3/16 in binding head | 811-2 |
| #6-32 x 1/4 in binding head | 811-161 |
| #6-32 x 1/4 in binding head | 811-7248 |
| #6-32 x 1/4 in pan head, brass | 11-1893 |
| #6-32 x 3/8 in binding head | 811-129 |
| #8-32 x 3/16 in binding head | 11-1618 |
| #8-32 x 1/4 in | 11-1369 |
| #8-32 x 1/4 in | 811-408-2 |
| #8-32 x 3/8 in binding head | 11-1766 |
| #8-32 x 3/8 in binding head | 11-6074-4 |
| #6-32 x7/32 in binding head | 11-6085-2 |
Toggle boot
·Prevents moisture and contaminants from entering levertobushing enclosure
·Front panel mounting
· Threaded mounting nut ensures proper assembly of silicon rubber boot
·Brass nut: 15/32-32 NS-2A
·Black color
SW1RY3030
| Mounting description | Color | Catalog number |
| Front panel mounting Molded | Black | SW1RY3030 |
| in brassmounting nut | ||
| (15/32-32NS-2A)ensures proper | ||
| assemblyof siliconrubberboot |
Note:
① Decoratorfacenutsfor15/32inbushing switches,15/32-32 thread.
② Hardware items are sold for use with Eaton switches only.
Commercial vehicle solutions
Vehicle controls
Indicating plates
ProductSelection-IndicatingPlatesfor15/32-InchBushingMountedSwitches
| Keywaylocation | Marking opposite keyway | Keyway side | Material | Finish | Catalog number | |
| ON | Keyway on bottom | ON | OFF | 0.032 in steel | Plain | 30-5632 |
| Keyway on bottom | ON | OFF | 0.032 in stee | Statuary bronze | 30-5632-3 | |
| Keyway on bottom | ON | OFF | 0.032 in steel | Burnished nickel | 30-5632-4 | |
| Keyway on bottom | ON | OFF | 0.032 in brass | Black cupric oxide @ | 30-2899-3 | |
| Keyway on bottom | RAD | PHO | 0.032 in steel | Statuary bronze | 30-5632-7 | |
| Keyway on bottom | RAD | PHO | 0.032 in steel | Burnished nickel | 30-5632-6 | |
| Keyway on bottom | RUN | START | 0.032 in steel | Burnished nickel | 30-5632-11 | |
| Keyway on bottom | HOT | COLD | 0.032 in steel | Burnished nickel | 30-5632-15 | |
| Keyway on bottom | HI | LOW | 0.032 in steel | Burnished nickel | 30-5632-16 | |
| Keyway on bottom | ON | STOP | 0.032 in steel | Burnished nickel | 30-5632-17 | |
| Keyway on bottom | FOR | REV | 0.032 in steel | Burnished nickel | 30-2899-2 | |
| Keyway on bottom | AUTO | TEST | 0.032 in steel | Burnished nickel | 30-2899-6 | |
| Keyway on bottom | PUSH | START | 0.032 in steel | Burnished nickel | 30-2899-7 | |
| Keyway on bottom | RUN | TEST | 0.032 in steel | Burnished nickel | 30-2899-9 | |
| Keyway on bottom | BLANK | BLANK | 0.032 in stee | Burnished nickel | 30-5632-8 | |
| L ON | Keyway on side | ON | OFF | 0.032 in steel | Burnished nickel | 30-5632-13 |
| ON | Keyway on side | OFF | ON | 0.032 in steel | 0.032 in steel | 30-2899-8 |
| OFF | Keyway on top | B | 0.032 in steel | Burnished nickel | 30-5632-12 | |
| Keyway on top | OFF | ON | 0.032 in steel | Burnished nickel | 30-5632-14 | |
| Keyway on top | SET | RUN | 0.032 in steel | Burnished nickel | 30-2899-10 | |
| Keyway on top | BLANK | RESET | 0.032 in steel | Burnished nickel | ||
| 30-2899-12 | ||||||
| Keyway on top | 0 | 0.032 in steel | Burnished nickel | 30-5632-23 |
Dimensions
Approximate dimensions in inches
Indicating plate
Note:
① White lettering.
Commercial vehicle solutions
Vehiclecontrols
Terminal identification
When speifidonrdwitcheswihavetheteminalsientifiedasshwintheilustrationat ightemnlmarkingwill ink-stamped on the side of the switch case and unused terminal positions will not be identified.
All viewsarefwithwithywardwaaliablmnlerandandandareonidedibd terminalsforsingle-,two-and four-pole switchesrespectively.Allothers are consideredoutboard.
"Three independent”ON-ON-ON circuit diagram
For switchmodied withThreIpendentONONONsecialcircuit.xtealmers arerequiredUsertoconect wirig instructions givenbelow.
ON-ON-ONspecialcircuit
| Connection points | Single-Pole |
| Connect common to terminals | 2 |
| Connect circuit "A" to terminals | 6 |
| Connect circuit “B" to terminals | 4 |
| Connect circuit "C" to terminals | 1 |
| 30N independent | No. of poles | UP Position | T | CENTER (Maintained) | Poswion (Keyway) | |
| 1 PDT | 1 | Circuit A | Circuit B | Circuit C | ||
| ·i 2 3 | 1 | 2 3 | ·3 | |||
| i 2 | ||||||
| ·4 5 .6 == | ·4 | 5 ·6 | 4 5 | ·6 |
Circuit diagrams
Special generalpurpose toggle circuits
Commercial vehicle solutions
Vehicle controls
| Circuitletter | Schematic | Circuitletter | Schematic | |
| APST | 2 ?3 | 2 Circuit | 1 | |
| 1PDT | 2 ·3 | 1PST | to ！7 女 | |
| 2PST | [2-16 | KPDT | ||
| PDT | 3.6 | 2PST | +01404 | |
| E 4PST | 2 5 81 131619112 | M 2PST | ||
| 4PDT | 3·6·912 | N 2PDT | TTE | |
| IPST | 4 3 66 | PDT | TE | |
| HPDT | 2Cicuit | TNC INO | ||
| 3° 6 |
Legends
Toggle switch legend
| Legend | Rockerswitchtype |
| · | Contact terminal—will make contact with switch lever |
| 。 | Isolated terminal—does not make contact with lever |
| Center terminal and switch lever | |
| α | Bulb |
| +4 | Momentary contact |
| Denotes mechanical contact portion |
Note:
① Poles 11 and 12 may be eliminated for three-pole devices.
② Poles 10, 11 and 12 may be eliminated for three-pole devices.
③ Dependent lamp.
④ Independent lamp.
⑤ wocircuitindicatspecialtfdoulethrwwitchinwhichthetwcircuitsbengcontrolmaybeiependent f eacht ⑥ For 206 Series, an additional lamp is available.
⑦ Available in 1PDT or 2PDT.
Commercial vehicle solutions
Vehicle controls
Dimmers and wipers
Product description
Eaton's uniquefamilyof dimmer and wipercontrols arefieldproventobe the market'smost dependable controls. Although originally designed for the heavy truck market, applications in various othertypes ofvehiclesexist. Paddle and slideversions are available andbothhavethelook,feeland durability associated withourcontrols. Bezels and actuatorsaremolded in asoftmattefinish.Illuminated and non-illuminatedversions areavailable. Board-mounted LEDslocated behind a laseretchedpanelprovideillumination.
Customized light panel lettering and custompadprintedbezelsarealso available.Bothdimmerandwiper controls aredesigned tocomplement theNGRfamily of switches.
Catalog number selection
How to order-paddleandslidecontrols
Todeterminecomletecatalgumberstartwiththeappropriatecontroltyeandaddtheappropriatcodelettesand numbers.
Commercial vehicle solutions
Vehicle controls
BezelPrintStyle
Note:
① Amperage ratings for dimmers only.
② Maximum dwell time describes the average time constant for delayed wiper activation.
③ Maximum nominal dwell.
④ Custom pad print available for bezel or button.
Technical data and specifications
Paddleandslidecontrols
| Description | Specification |
| Ratings (dimmer only) | 4,6, 8, 10A at 14 Vdc |
| Mechanical life | 3, 5A at 28 Vdc |
| 100,000 operations, maximum | |
| Operating temperature range Base material | -40° to 185°F (40° to 85°C) |
| Mounting means | High-grade thermoplastic molding material |
| Mounting hole | Snap-in mounting with plastic bezel |
| Panel thickness | Rectangular panel cutout: 1.734 x 0.867 in (44.00 x 22.00 mm) |
| Paddle | 0.030 to 0.190 in (0.762 x 4.80 mm) |
| Slide Approximate weight | 0.030 to 0.080 in (0.762 x 2.03 mm) 1.5 oz |
Commercial vehicle solutions
Vehicle controls
Dimensions
Approximate dimensions in inches (mm)
Paddle control
Slide control
Commercial vehicle solutions
Vehicle controls
Product description
Therotarywiperhasbeendesigned tobeahighlydurablerotarywiper control for the transportation industry. TheRW200 series wiper has four wiper control positions via arotatingknob: Off,Intermittent,Continuous LowSpeed and Continuous High Speed.The device has a washerfunctionthat operates the washer pump and wiper while the knob is depressed.
Features
·Load Dump Protection ·The switchwillwithstand a120V load dump per SAE J1455
·ReverseVoltageProtection ·The device will not be damaged when exposed to12 Vdc for 5 minutes
Options
· Variable bushing length · Variable spindle length ·Choice of connectors ·Pad printing on knob
Standards and certifications
Meets SAE standards J1455,J1944 and J1988.
Productselection
determtataltartththapprpriatonrltandadthapprpriateetan
| Bushing length in | ||||||||
| Series RW | Code RW | Voltage 12 Vdc | Code 200 | Packard connectors 12064752 | Code 12A | inches (mm) 0.261 (6.63) | Code A | Catalog number RW20012AA |
| RW | RW | 12 Vdc | 200 | 12064752 | 12A | 0.424 (10.77) | B | RW20012AB |
| RW | RW | 12 Vdc | 200 | 12977042 | 12B | 0.261 (6.63) | A | RW20012BA |
| RW | RW | 12 Vdc | 200 | 12977042 | 12B | 0.424 (10.77) | B | RW20012BB |
| RW | RW | 12 Vdc | 200 | 6288538 | 12C | 0.261 (6.63) | A | RW20012CA |
| RW | RW | 12 Vdc | 200 | 6288538 | 12C | 0.424 (10.77) | B | RW20012CB |
| RW | RW | 12 Vdc | 200 | 6294544 and 2977048 | 12D | 0.261 (6.63) | A | RW20012DA |
| RW | RW | 12 Vdc | 200 | 6294544 and 2977048 | 12D | 0.424 (10.77) | B | RW20012DB |
Commercial vehicle solutions
Vehicle controls
Technical data and specifications
Rotary wipers
| Description | Specification |
| Operating voltage range | 9 Vdc to 16 Vdc |
| Continuous load rating | 17A from 40° to 73°F (40° to 23°C) |
| Derated to 5A at 185°F(85°C) | |
| Wiperelectromechanical life | 50,000 cycles |
| Electrical cycle life | 250,000 cycles in the Intermittent position |
| 300,000 cycles combined in the Low and High positions | |
| Operating temperature | -40° to 185°F (-40° to 859℃) |
| Humidity rating | Device will operate properly at 98% humidity between —40° and 100°F (—40° and 38°C) |
| Mechanical shock | The switch will withstand a 3ft drop on concrete |
| Vibration | The device will operate properly while being exposed to133 hours of 1G rms vibration along all three axes, sweeping from 5 Hz to 1500 Hz at one octave per minute |
Connector drawings
Circuit continuity
| Switch position | Circuit continuity |
| Off | Open |
| Intermittent | Yellow——Red and brown |
| Low speed | Yellow |
| High speed | White |
| Washer | Brown |
| Washer | Red—Positive |
| Washer | Black—Negative |
| Wire color | Switchconnections |
| Yellow | Motor low speed terminal |
| White | Motor high speed terminal |
| Blue | Motor park terminal |
| Black | Ground |
| Brown | Washer pump |
| Red | +12 Vdc (positive) |
Commercial vehicle solutions
Vehicle controls
Dimensions
Approximate dimensionsininches (mm)
Commercial vehicle solutions
Vehicle controls
ACRated
Pushbuttons
Product description
These general-purpose,AC rated, pushbutton switches offer a widevariety of configurations, button styles and terminationtypes.The7835and7836 light-duty series pushbutton switches areAConly.Theyfeatureslow-make/ slow-break butttype contacts with a light operatingpressurethatisparticularly suited toinstrumentationapplications.
Features
Circuits ·1PST,1PDT,2PDT · Momentary action
·Terminal types ·Screw terminals, brass (furnished unassembled) ·8448 Series -\#6.32x3/16 in binding head screws (Cat. No. 811-2) ·8410/8411Series -\#5-40x3/16 in (Cat.No.811-7206) 8406/8440 Series -\#5-40x5/32 inscrews (Cat.No.11-26)
·Solder lug, brass silverplated
·Hardware supplied Onehexagonlocknut (Cat.No.15-192) and onebrightnickel-plated knurled facenut (Cat.No.15-124F1) 8411/8418Serieshas abrightnickel-plated hexagonfacenut (Cat.No.15-966-2) Allhardwareisfurnished unassembled ·Other mounting types are flush,nest and snap-in
Standards and certifications ①
·UL Recognized ·CSA?Certified ·RoHS
Commercial vehicle solutions
Vehicle controls
Product selection
Non-lluminated Light-Duty, Momentary contact
Flush
Flush mounted
| Poles and | Circuit | Button | Button extension dimensions"B" | operating | Typical max. Mounting or bushing length dimensions | Catalog | |||
| Rating | throwContactsnumberconstruction | Color in inches(mm) | force | "A"in inches (mm) | number | ||||
| Screwterminals | |||||||||
| 1/4A, 250 Vac/Vdc | 1PST | NC | A | Nylon | Black | 0.468 (11.89) | 0.7 Ibs @ | Flush | 8406K1 |
| 3/4A,125 Vac/Vdc | 0.453 (11.50) | 0.7 Ibs @ | Flush | 8410K1 |
Snap-in
| Rating | Poles and throw Contacts | Circuit number | Button | construction Color | Button extension dimensions"B"" in inches (mm) | operating force | Typical max. Mounting or bushing lengthdimensions "A" in Inches (mm) | Catalog number |
| SpadeTerminals(0.250 in) | ||||||||
| 3/4A,125 Vac/Vdc | 1PST NC | A | Nylon | White | 0.375 (9.53) | 一 | Snap-in | 8423K1 |
| 1/4A, 250 Vac/Vdc | NO | A | Nylon | White | 0.375 (9.53) | Snap-in | 8424K1 | |
Commercial vehicle solutions
Vehicle controls
Snap-in
Note:
| Poles and | Circuit | Button | Button extension dimensions"B" | Typical max. operating | Mounting or Bushing Length Dimensions"A" | Catalog | |||
| Rating Solderlugs | throw | Contacts | number | construction | Color in Inches(mm) | force | in Inches (mm) | number | |
| 3/4A,125 Vac/Vdc 1/4A, 250 Vac/Vdc | 1PST | NC | A | Nylon | Black | 0.250 (6.35) | 1.5 Ibs @ | 0.250 (6.35) | 8411K5 |
| 3/4A,125 Vac/Vdc | 1PST | NC | A | Nylon | Black | 0.406 (10.31) | 1.5 Ibs @ | 0.468 (11.89) | 8411K8 |
| 1/4A, 250 Vac/Vdc 5A, 12 Vdc, 3A, 125 Vac | 1PST | NO | A | Metal | 一 | 0.296(7.52) | 2.5lbs | 0.468 (11.89) | 8440K2@ |
| 3A,125Vac 1A,250 Vac | A | Metal | 一 | 0.312(7.92) | 一 | 0.562 (14.27) | 7835K11A@ | ||
| 1/10 hp, 125 Vac 3A,125Vac | 1PST | NC | A | Nylon (snap-on) | Black | 二 | 一 | 0.562(14.27) | 7835K11C |
| 1PST | NC | A | Nylon (snap-on) | Red | 二 | 二 | 0.562 (14.27) | 7835K11D | |
| 1PST | NO | A | Metal | 一 | 0.312(7.92) | 0.562(14.27) | 7836K11A | ||
| 1A,250 Vac 1/10 hp, 125 Vac Screwterminals | 1PST | NO | A | Nylon (snap-on) | Black | 一 | 一 | 0.562(14.27) | 7836K11C |
| 1PST | NO | A | Nylon (snap-on) | Red | - | 一 | 0.562 (14.27) | 7836K11D | |
| 3/4A,125Vac/Vdc 1/4A, 250 Vac/Vdc | 1PST | NC | A | Nylon | Black | 0.406 (10.31) | 1.5 Ibs@ | 0.468 (11.89) | 8411K7 |
| 1PST | NO | Nylon | Black | 0.375 (9.53) | 1.5 Ibs | 0.468 (11.89) | 8411K12 | ||
| 5A, 12 Vdc, 3A, 125 Vac | 1PST | NO | A | Metal | 二 | 0.296 (7.52) | 2.5 Ibs | 0.468 (11.89) | 8440K3 |
| 3A,125 Vac,1A,250 Vac 1/10 hp, 125 Vac | 1PST | NO | A | Metal | 0.312 (7.92) | 一 | 0.562(14.27) | 7836K13A | |
| Wire leads | |||||||||
| 3/4A, 125 Vac | 1PST | NC | A | Metal | 0.312 (7.92) | 0.562 (14.27) | 7835K12A | ||
| 1A, 250 Vac 1/10 hp, 125 Vac | 1PST | NO | A | Metal | 一 | 0.312(7.92) | 一 | 0.562 (14.27) | 7836K12A |
| Spade terminals (0.250 in) | |||||||||
| 1/4A, 250 Vac/Vdc 3/4A,125 Vac/Vdc | 1PST | NO | A | Nylon | Red | 0.250 (6.35) | 1.5 Ibs @ | 0.250 (6.35) | 8411K13 |
| 1PST | NC | A | Nylon | Black | 0.406 (10.31) | 1.5 Ibs | 0.468 (11.89) | 8411K10 | |
| 1PST | NO | A | Nylon | Black | 0.375 (9.53) | 1.5 Ibs @ | 0.468 (11.89) | 8411K11 | |
| 3A,125 Vac | 1PST | NC | A | Nylon | Black | 0.250 (6.35) | 1.5 Ibs | 0.250 (6.35) | 8418K1 |
| 1PST | NO | A | Nylon | Black | 0.406 (10.31) | 1.5 Ibs | 0.468 (11.89) | 8418K12 |
Commercial vehicle solutions
Vehiclecontrols
Non-Illuminated
Medium-Duty,Momentary contact
One-Hole
| Poles | Button extension dimensions"B" | Typical max. operating force | Mounting or bushing length dimensions"A" in inches (mm) | Catalog number | |||||
| and | Circuit Contacts number | Button construction Color in inches(mm) | |||||||
| Rating Screwterminals | throw | ||||||||
| 15A, 125 Vac 10A, 250 Vac | 1PST | NO | A | Metal | 0.531(13.49) | 0.9Ibs | 0.687 (17.45) | 8444K3 | |
| 1/3 hp, 125-250 Vac 15A, 125 Vac, NO | 1PST | NO | A | Metal | 0.250 (6.35) | 0.9Ibs 2.0 Ibs | 0.343 (8.71) 0.687 (17.45) | 8444K4 | |
| 10A, 125 Vac, NC 10A, 250 Vac, NO | 1PDT | NO, NC | B | Metal | 0.531 (13.49) | 8434K2 | |||
| 5A, 250 Vac, NC 1/2 hp, 250 Vac 1/4 hp, 125 Vac | 1PDT | NO, NC | B | Bakelite | Black | 0.531 (13.49) | 2.0 Ibs | 0.687 (17.45) | 8435K2 |
| 15A, 125 Vac 10A, 250 Vac | 2PST | NO | C | Metal | 0.250 (6.35) | 0.343 (8.71) | 8448K2 | ||
| Spade terminals(0.250 in) 15A, 125 Vac | NO | A | Metal | 0.9 Ibs | |||||
| 10A, 250 Vac 1/3 hp,125-250 Vac | 1PST | 0.531 (13.49) | 0.687 (17.45) | 8444K2 | |||||
| 15A, 125 Vac, NO 10A, 125 Vac, NC 10A, 250 Vac, NO | 1PDT | NO, NC | B | Metal | 0.531 (13.49) | 2.0 Ibs | 0.687 (17.45) | 8434K1 | |
| 5A, 250 Vac, NC 1/2 hp, 250 Vac 1/4 hp, 125 Vac | 1PDT | NO, NC | B | Bakelite | Black | 0.531 (13.49) | 2.0 Ilbs | 0.687 (17.45) | 8435K1 |
| 15A, 125Vac,10A,250Vac | 2PST | NO | C | Metal | 0.250 (6.35) | 0.343 (8.71) | 8448K1 | ||
Technical data and specifications
| Description | Specification |
| Ratings | SeeProduct Selection tables on Page 237 and the table above. |
| Contact material | |
| 3-6A rated | Movable, silver-plated copper |
| Stationary,silver-platedcopper | |
| 10-15A rated | Movable, silver-plated copper with fine orcoin silver contact face button |
| Stationary,copperwithfineorcoinsilvercontactfacebutton | |
| Wire leads Mounting means—One-hole mount | 18 gauge,6in(152mm)longskinned 0.75in(19mm),Lengthsbeyond6in(152mm)are additional charge |
| Threaded bushing—0.468 in dia. 32 threads/inch (11.90 mm) | |
| Keyway—0.068Wx0.035D in(1.73Wx0.89 Dmm);provides anti-rotation feature | |
| Keyway on 7835/7836 Series is 0.080 W x 0.040 D in (2.03 W x 1.01 D mm) | |
| Operating temperature range 0° to 150°F (-17.8° to 65.6°℃) |
Note:
Commercial vehicle solutions
Vehiclecontrols
Dimensions
Approximate dimensions in inches (mm)
8410
8406
Commercial vehicle solutions
Vehicle controls
Commercial vehicle solutions
Vehicle controls
Approximatedimensionsininches(mm)
8448K1
8442and8444(ScrewTerminals)
8448K2
Dimensions, weights and ratings
Dimensionsweightsandratingsgiveninthiscatalgareapproximateandhouldntbeuedforconstructionpurose Drawingntainingxatdimniosareavailalurequstllitdprutpificatonsandratiaresujecth without notice. Photographs are representative of production units.
Termsandconditions
All pricesanddiscouts aresubject tochangewithout noticeWhenpricechangeoccur, theyarepulishedin theatn CorporationPrieandvalabityDest）llrdersaccptdyEatoltricasectraresubjttthgenraltma conditions as set forth in Appendix 1—Eaton Terms & Conditions.
Technicalanddescriptivepublications
Thiscatalcontainsbriftchicaatafproereletiofprodturhernfomationsavailaleinthfomf teh informationpuliationandilratdbrhurfadionrdutmatiorequirdontactlcalatnr Distributor,call1-800-525-2000 orvisit ourWebsiteat www.eaton.com.
Compliancewith nuclearregulation10 CFR 21
Eatonprdtareldascmmercialgradprodtttndedforaplicationinfacitioractitilinedbthi Stateslulatormoratmicpdurherificatiowilrqidrfth products inasafety-related application in any nuclear faitylicensed by the U.NuclearRegulatoryCommission.
Warning
TheinstalationandusefEatonprdutsshouldbenaccordancewiththeprovisionsof the.ationallectricalCdeandor otherlocaldeornustrystadardthatarerinttthparicarndtalltoetnccrdanceith codes and standards could be hazardous topersonnel and/or equipment.
Thesecatalogpagesdonot purport tocoveralldetailsorvariationsinequipmentnortprovideforeverypoible contingencyteminconectinwithnstalltionperatiormaintenacehouldurheormationedeired shoul partiulprlmarisewhicharenterduficietlforthpurchaser'spurethmatthoulderd to the local EatonProducts DistributororSales OfficeThecontents of thiscatalog shallnot becomepartof ormodify any priororexistingareementcmitmentrrelationhiphesalscontractcontainstheentrebligationfEatonslectri sectorThewarrantycontainedinthecontractbetweenthepartiesisthesolewarrantyfEaton.Anystatmentscontaind herein do not create new warranties or modify the existing warranty.
Eaton
1000 EatonBoulevard
Cleveland, OH 44122
United States
Eaton.com
⊚ 2024 Eaton
All Rights Reserved
Printed in USA
Publication No. EMOB0046
December 2024
