该页无缩略图
powerteam.com 202 ToolsSLIMLINE TORQUE WRENCHES
MAX. TORQUE: 4,210 FT. LBS. AT 10,000 PSI
Drive Body
Order No.
Hex Range for SlimLine SlimLine Min. Torque SlimLine Max. Torque Weight (Link Only)
(in.) (in.) (ft. lbs.) (ft. lbs.) (lbs.)
TWLC2 1.13 2.38 222 1,240 - 1,850 2.2
TWLC4 1.81 3.13 505 2,639 - 4,210 4.4
Link
Order No.
Hex Range for SlimLine SlimLine Min. Torque SlimLine Max. Torque Weight (Link Only)
(in.) (in.) (ft. lbs.) (ft. lbs.) (lbs.)
TWSL2-# 1.13 2.38 222 1,240 - 1,850 4.2 - 4.5
TWSL4-# 1.81 3.13 505 2,639 - 4,210 8.0 - 8.4
Nut A/F Link
Order No.
Max. Torque Weight
(Link Only)
(in.) (ft. lbs.) (lbs.)
1.25 TWSL2-032 1,240 4.1
1.44 TWSL2-036 1,430 4.2
1.63 TWSL2-041 1,600 4.3
1.81 TWSL2-046 1,850 4.3
2.00 TWSL2-050 1,850 4.3
2.19 TWSL2-055 1,850 4.4
2.38 TWSL2-060 1,850 4.4
Nut A/F Link
Order No.
Max. Torque Weight
(Link Only)
(in.) (ft. lbs.) (lbs.)
1.81 TWSL4-046 2,639 8.0
2.00 TWSL4-050 3,271 8.2
2.19 TWSL4-055 3,568 8.2
2.38 TWSL4-060 3,867 8.3
2.56 TWSL4-065 4,210 8.4
2.75 TWSL4-070 4,210 8.4
2.94 TWSL4-075 4,210 8.4
3.13 TWSL4-080 4,210 8.4
Note: The “#” suffix will be replaced with the actual link size in a numeric value.
Note: Links are sold separately from the drive body, refer to the tables below.
Mechanical Puller
Selection SlimLine Application Range Optional Cylinders
Due to the compact design, the maximum torque of the
TWSL links vary depending on link size, reference the
information below for complete details.
* Shown with optional handle, order # DFTAS000001
for TWSL2, DFTAS00002 for TWSL4.
New SlimLine*
(TWSL Series)
Standard
(TWLC Series)
TW
SERIES
Technical Fit Overview
The TWSL’s narrow width and reduced radius design enables the tool
to fit into tight areas where standard low clearance links cannot.
TWSL2 SlimLine Link Reference Table* TWSL4 SlimLine Link Reference Table*
Torque Wrench Link Ordering Information for SlimLine
Torque Wrench Drive Body Ordering Information for SlimLine
203 powerteam.com
Tools
■ Pressure balanced spool mechanism allowing for easier
trigger pull/squeeze effort (fatigue reduction)
■ Two-stage trigger system (interlock and trigger)
preventing accidental operation/advancement of the
tool
■ 2:1 Safety Factor (pressure test min 20,000 psi)
■ Can be used with any hydraulic torque wrench
Model Shown:
400148
BFCV BOLTING FLOW CONTROL VALVE
SERIES
Order
No. A B C D
Prod.
Wt.
(in.) (in.) (in.) (in.) (lbs.)
4000148 10.382 30.75 1.883 7.609 6.19
Ordering Information
Specifications subject to change without notice
A
B
C
D
Features
powerteam.com 204 ToolsBOLTING FLOW CONTROL VALVE BFCV
SERIES
Hydraulic
Torque Wrench
Bolting Flow
Control Valve
Hydraulic
Pump Unit
Twin-Line
Hose
BOLTING FLOW CONTROL VALVE
Allows the operator to position the torque wrench
with zero risk of entrapment or nipped fingers
Suitable for hydraulic tool applications where local
isolation and operator control is required
Isolates the wrench whilst operator carries out
drive direction changes, link switch over on low
profile tools
Pumps Hoses
Other Related Items
Wrenches
Refer to the Bolting Systems catalog or website for more details.
205 powerteam.com
Tools
■ High-speed continuous rotation, speeds up bolt working
times
■ Torque output accurate to +/- 3%.
■ Unique calibration for each tool, with certificate.
■ Stepless torque adjustment via air control unit, large
easy read air pressure gauge
QUALITY MEANS HIGHER PRODUCTIVITY
PNEUMATIC TORQUE WRENCH NRP 5 MODELS, UP TO 6,000 NM (4,428 LBFT) SERIES
*Maximum Working Air Pressure 6.3Bar (90psi)
** Weight not including Reaction Arm
■ Quiet operation for greater operator comfort.
■ Robust, non-impact, low vibration gearbox design
■ Pistol grip design for easy handling
DESIGNED WITH SAFETY IN MIND
■ High-low gear, two-speed design for rapid nut rundown.
■ Easy access motor switch to change drive direction
■ 360 Degree rotating drive unit for easy reaction arm
positioning
■ Automatic switch-off at desired torque
ENHANCED USABILITY
Tool
Model
Min.
Torque
Max.
Torque
Square
Drive
Rotation
Speed A B C D E F Wt.
Nm lb-feet Nm lb-feet (in) RPM Millimeters (Inches) Kg Lbs
NRP-9 60 44 900 664 3/4 40 317 (12.48) 72 (2.83) 88 (3.46) 140 (5.51) 88 (3.46) 180 (7.09) 7.4 16
NRP-15 100 74 1500 1107 3/4 28 317 (12.48) 72 (2.83) 88 (3.46) 140 (5.51) 88 (3.46) 180 (7.09) 7.4 16
NRP-30 190 140 3000 2214 1 13 351 (13.82) 72 (2.83) 88 (3.46) 140 (5.51) 88 (3.46) 180 (7.09) 8.5 19
NRP-45 300 221 4500 3321 1 1/2 9 362 (14.25) 9.2 (3.62) 105 (4.13) 175 (6.89) 102 (4.02) 180 (7.09) 11.2 25
NRP-60 480 354 6000 4428 1 1/2 6 317 (12.48) 9.2 (3.62) 105 (4.13) 175 (6.89) 102 (4.02) 180 (7.09) 11.2 25
Order
No.
Description Order
No.
Description
NRP-9K NRP-9K Pneumatic Torque Wrench Kit
NRP-15K NRP-15K Pneumatic Torque Wrench Kit
NRP-30K NRP-30K Pneumatic Torque Wrench Kit
NRP-45K NRP-45K Pneumatic Torque Wrench Kit
NRP-60K NRP-60K Pneumatic Torque Wrench Kit
Technical Dimensions
Ordering Information
Features
Each kit consists of Pneumatic Torque Wrench, Air Control Unit
(NRP-CU), 4m Air Hose (AH4M), Storage Case (2010883),
Calibration Certificate, Operating Manual/Parts List
powerteam.com 206 Tools■ Two-speed high-performance pump.
■ External adjustable pressure regulator
■ Retract side internal relief valve protects tool.
■ Hand remote control with 20 ft. cord.
■ Use for single or double-acting tools.
■ Four-tool manifold allows use of up to four tools
simultaneously.
VANGUARD® ELECTRIC HYDRAULIC TORQUE
WRENCH PUMPS.
Model Shown:
PE55TWP-4-BS, PE55TWP-BS
TORQUE WRENCH, ELECTRIC HYDRAULIC PUMP
56 CU. IN/MIN 10,000 PSI
Order
No.
Width Length Height Electric
Motor
No.
of
Tools
Oil Delivery
per min.
Oil
Reservoir
Cap.
Usable
Oil
Prod.
Wt.
(in.) (in.) (in.) (12,000 rpm) (cu. in.) (gal.) (cu. in.) (lbs.)
PE55TWP-BS 9.50 17.14 18.12 110/115VAC, 50/60 Hz, 25A 1
704 in³ @ 100 psi
56 in³ @ 10,000 psi
2.50 324 75.00
PE55TWP-220-BS 9.50 17.14 18.12 220/230VAC, 50/60 Hz, 13A 1 2.50 324 75.00
PE55TWP-E110* 9.50 17.14 18.12 110VAC, 50 Hz, 25A 1 1.25 324 75.00
PE55TWP-E220* 9.50 17.14 18.12 220VAC, 50 Hz,, 13A 1 1.25 324 75.00
PE55TWP-4-BS 9.50 17.14 18.12 110/115V, 50/60 Hz, 25A 4
704 in³ @ 100 psi
56 in³ @ 10,000 psi
2.50 324 78.00
PE55TWP-4-CF-BS 12.80 17.50 18.70 110/115V, 50/60 Hz, 25A 4 2.50 324 83.00
PE55TWP-4-220-BS 9.50 18.49 19.15 220/230VAC, 50/60 Hz, 13A 4 2.50 324 78.00
PE55TWP-4-E110* 9.50 18.49 19.15 110VAC, 50 Hz, 25A 4 1.25 324 78.00
PE55TWP-4-E220* 9.50 18.49 19.15 220VAC, 50 Hz,, 13A 4 1.25 324 78.00
* CE Approved - designed for 50 Hz applications
Pump models with -BS suffix are supplied with black reservoir and Bolting Systems branding
Mechanical Puller
Selection
CAUTION Optional Cylinders
THIS PUMP SHOULD NOT BE USED FOR LIFTING
APPLICATIONS, IT’S DESIGN FOR TORQUE
WRENCH APPLICATIONS ONLY.
4 mounting holes 1/2\"–20
H
W
L
PE55
SERIES
Ordering Information
Features
207 powerteam.com
Tools
■ Use where air is the preferred source of power.
■ Powerful 3 hp motor starts under load.
■ External adjustable pressure regulator.
■ Retract side internal relief valve protects tools.
■ Use for single or double-acting tools.
■ Four-tool manifold allows use of up to four tools
simultaneously.
■ 25 ft. pneumatic remote controller included.
AIR HYDRAULIC TORQUE WRENCH PUMP
Model Shown:
RWP55-4-BS-R
TORQUE WRENCH, AIR/HYDRAULIC PUMP RWP 55 CU. IN./MIN. MAX. FLOW 10,000 PSI SERIES
Order
No.
Width Length Height Air
Motor
No.
of
Tools
Oil Delivery
per min.
Oil
Reservoir
Cap.
Usable
Oil
Prod.
Wt.
(in.) (in.) (in.) (cu. in.) (gal.) (cu. in.) (lbs.)
RWP55-BS 9.50 16.55 19.83 3HP, 50 cfm @ 80 psi 1 465 in³ @ 100 PSI
55 in³ @ 10,000 PSI 2.50 324 98.00
RWP55-BS-R 11.90 18.70 21.00 3HP, 50 cfm @ 80 psi 1 465 in³ @ 100 PSI
55 in³ @ 10,000 PSI 2.50 324 103.00
RWP55-4-BS 9.50 16.55 19.83 3HP, 50 cfm @ 80 psi 4 465 in³ @ 100 PSI
55 in³ @ 10,000 PSI 2.50 324 101.00
RWP55-4-BS-R 11.90 18.70 21.00 3HP, 50 cfm @ 80 psi 4 465 in³ @ 100 PSI
55 in³ @ 10,000 PSI 2.50 324 106.00
Mechanical Puller
Selection
CAUTION Optional Cylinders
THIS PUMP SHOULD NOT BE USED FOR LIFTING
APPLICATIONS, IT’S DESIGN FOR TORQUE
WRENCH APPLICATIONS ONLY.
H
L
W
Ordering Information
Pumps supplied with black reservoir and Bolting Systems branding. For Roll Cage, add -R, after Order No.
Features
powerteam.com 208 Tools■ Specially designed “tool steel” cutter blade penetrates
the nut to the precise point where it cracks, stopping
short of the bolt threads.
■ Dial-in” feature on HNS150 makes adjustment of splitter
simple, without the worry of damaging the bolt.
■ Nut splitter features a dramatically improved cutter
blade with an 800% greater resistance to chipping and
breaking over previous models.
■ Compact size allows you to use it in confined areas
where it will deliver enough force to split the toughest
“fused” or rusted-on grade 2H nuts.
■ All models feature a rugged one-piece cutting frame
coupled to a heavy-duty hydraulic cylinder.
HYDRAULIC NUT SPLITTERS
Model Shown:
HNS150, HNS150A, HNS225
HYDRAULIC NUT SPLITTERS
TONNAGE RANGE: 15 - 25
Order
No. A B C D E F Head
Thickness
Replacement
Blade
Prod.
Wt.
(in.) (in.) (in.) (in.) (in.) (in.) (in.) (lbs.)
HNS150 2.88 3.38 0.65 2.75 10.38 2.06 1.0 308840 8.10
HNS150A 3.02 14.20 1.03 2.11 3.70 1.16 1.0 351985 15.80
HNS225 4.25 6.00 14.38 3.88 — 3.25 1.5 308022 29.00
A
C
E
D
B
F
A
B
C
E
F D
FOR HNS150A
FOR HNS150 & HNS225
For HNS150A
A
C
E
D
B
F
NUT GRADE CAPACITIES
Order
No. 2 or A 5 or B 8 or C 2H
HNS150 1/2 - 1-1/2 in. hex 1/2 - 1-1/2 in. hex 1/2 - 1-5/16 in. hex 1/2 - 1-1/8 in. hex
HNS150A 1/2 - 1-1/2 in. hex 1/2 - 1-1/2 in. hex 1/2 - 1-5/16 in. hex 1/2 - 1-1/8 in. hex
HNS225 1-1/8 - 2-1/4 in. hex 1-1/8 - 2-1/4 in. hex 1-1/8 - 2-1/16 in. hex 1-1/8 - 1-11/16 in. hex
Align mark on cutter blade with scale.
HNS
SERIES
Ordering Information
Features
209 powerteam.com
Tools
Model Shown:
FLS15, FLS15-ST
HYDRAULIC FLANGE SPREADER FLS TONNAGE RANGE: 16.5 SERIES
■ 33,000 pound wedge-driven spreader. Jaws fully
supported by wedge for excellent durability.
■ Low friction provided by heavy-duty extended-life
lubricant, ideal for flanges with narrow gaps (only 0.2
inches required for entry).
■ Compact and lightweight design (only 9.9 inches long
at a weight of 7 pounds).
■ Ergonomically balanced handle included.
■ Suitable for the offshore environment due to superior
corrosion resistance
■ Quick adjustments for various tasks due to
interchangeable shoes (both stepped and serrated)
■ Easy and quick maintenance without special tools
required.
■ Includes female half coupler & mates to standard 3/8”
male half coupler (9798).
2.48 in.
2.35 in.
8.93 in.
0.19 in.
1.50 in.
9.90 in.
0.57 in.
1.87 in.
8.94 in.
2.35 in.
2.48 in.
0.19 in.
0.50 in.
0.82 in.
1.13 in.
1.45 in.
9.90in
0.58 in.
0.89 in.
1.21 in.
1.52 in.
1.84 in.
2.48 in.
2.35 in.
8.93 in.
0.19 in.
1.50 in.
9.90 in.
0.57 in.
1.87 in.
8.94 in.
2.35 in.
2.48 in.
0.19 in.
0.50 in.
0.82 in.
1.13 in.
1.45 in.
9.90in
0.58 in.
0.89 in.
1.21 in.
1.52 in.
1.84 in.
Fully CLOSED Fully OPENED Fully CLOSED Fully OPENED
Order
No.
Maximum
Spreading Force
Minimum
Tip Clearance
Maximum
Tip Spread
Spreader
Type
Oil
Cap.
Maximum
Operating Pressure
Prod.
Weight
(lbs.) (in.) (in.) (cu. in.) (psi.) (lbs.)
FLS15
33,000 0.197 Inches 0.59 Inches Hydraulic 1 10,000 7.00
FLS15–ST
FLS15 Spreader FLS15-ST Spreader
INTEGRATED WEDGE CONCEPT IDEAL FOR
CREATING SPACE FOR FLANGE SURFACE
CLEANING AND REPAIR
Features
powerteam.com 210 ToolsHYDRAULIC FLANGE SPREADER
TONNAGE RANGE: 16.5
COUPLER & GAUGE ADAPTER
Order No. Description
9798 Male half coupler.
9670 Gauge adapter
OTHER OPTIONAL ACCESSORIES
* Part number is for one shoe only. Two shoes required per spreader.
HANDLE
Order No. Description
2008410 Lightweight spreaders handle is
designed for use with FLS15 or
FLS15-ST. Wt., 0.12 lbs.
STEPPED BLOCK
Order No. Description
SB15 Use to increase the wedge opening.
Designed to use with FLS15 or FLS15-
ST. (1 piece).
HOSE
Order No. Description
9764 Hydraulic hose assembly.
STEPPED SHOE
Order No. Description
2008083* Lightweight spreader stepped shoe
with an interlocking friction-free
smooth, parallel wedge design, Wt.
0.64 lbs.
ANALOG GAUGE
Order No. Description
9040 Pressure gauge.
SERRATED SHOE
Order No. Description
2008082* Lightweight spreader serrated shoe.
PUMP
Order No. Description
P19L Two-speed, single-acting hand pump .
29 cu. in. oil capacity. Wt. 5.10 lbs.
TYPICAL APPLICATIONS:
■ Pipe and flange repair
■ Removing elbows
■ Couplers & gasket and metal seal replacement
■ Heavy equipment maintenance
FLS
SERIES
211 powerteam.com
Tools
■ You’ll never again have to resort to “hammer and
chisel” methods that waste time and effort. Flange
spreaders should be used in pairs to provide even
spreading force.
■ Use HFS3A for applications where total thickness of
flanges and max. spread gap is 3 or less, and flange
bolts are a min. of 0.69\" diameter.
■ Use HFS6A if total thickness of flanges and max.
spread gap is 6\" or less, and flange bolts are a min. of
0.81\" diameter.
Model Shown:
HFS3A
PIPE FLANGE, HYDRAULIC SPREADERS HFS TONNAGE RANGE: 5 & 10 SERIES
Order
No.
Cap. Standard
Wedge
Type
Optional Wedges Min. Flange Opening Min. Flange Opening Min.
Combined
Flange
Opening
Pin
Dia.
Prod.
Wt.
30˚
Thin
60˚
Blunt
60˚
Std.
60˚
Blunt
30˚ 60˚
Std.
60˚
Blunt
30˚
(ton) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (lbs.)
HFS3A 5 60° Sharp 350823 350822 0.06 1.00 0.06 1.25 1.25 0.72 3.50 0.69 9.00
HFS6A 10 60° Sharp 350549 350550 0.06 1.50 0.06 2.00 2.00 0.97 6.56 0.81 18.00
Ordering Information
Mechanical Puller
Selection
OPTIONAL WEDGE ENDS Optional Cylinders
350823 350822 350549 350550
Standard 60° wedge is suitable for most flanges;
30° “thin” and 60° “blunt” wedges are optional.
CONTROLLED AND GUIDED FLANGE SEPARATION
TOOL
HFS6AP59L spreader offers up to 10 tons of spreading force
to safety separate this flange.
Features
powerteam.com 212 Tools■ Use to lift machines to spread concrete forms or rebar
and perform straightening jobs.
■ Conforms to ASME B30.1 standard.
■ High strength alloy steel forged upper and lower jaws
on HS2000.
■ Jaws are spring-return to retract automatically when
pressure is released.
■ 1 ton capacity spreader, full 2,000 lbs. capacity at
10,000 PSI with 4” spread.
■ Can be “dead-ended” at 4” spread under full load.
■ Needs only 0.56” clearance to engage jaws.
■ 1.5 ton capacity spreader, full 3,000 lb. capacity at
10,000 psi. with 11.5” spread.
■ Needs only 1.25” clearance to engage jaws.
■ Can be “dead-ended” at 11.50” spread at full load.
HYDRAULIC SPREADERS OFFER A GREATER
FORCE THAN TRADITIONAL MECHANICAL TOOLS.
HS2000 (FORGED STEEL)
HS3000 (HIGH GRADE DUCTILE IRON)
Model Shown:
HS2000, HS3000
SPREADERS, HYDRAULIC
TONNAGE RANGE: 1 - 1.5
Order
No.
Cap. Max.
Spread A B C D E F G H Oil
Cap.
Min. Clearance
Required
Prod.
Wt.
(ton) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (cu. in.) (in.) (lbs.)
HS2000 1.0 4.00 4.00 2.00 0.56 6.94 9.31 2.00 2.25 — 0.63 0.56 4.80
HS3000 1.5 11.50 11.50 4.50 1.19 20.13 17.75 2.25 5.63 3.63 3.50 1.25 22.00
111
/2\"
201
/8\"
21
/4\" 35
/8\" 55
/8\"
173
/4\"
13
/16\"
41
/4\"
HS3000
A
B
C
615/16\"
95
/16\"
2\"
4\" Max. 9
/16\"
615/16\"
21 2\" /4\"
HS2000
A B
C
D
E
F G H
D
E
F
G
HS
SERIES
Ordering Information
Features
213 powerteam.com
Tools
■ In 5, 10 and 25 ton capacities. For use with Power
Team general purpose single-acting series cylinders of
comparable capacity.
■ For clamping, pressing and bending. Ideal for welding
and metal fabrication for fit-up of sheet or plate steel.
■ Clamps withstand full rated capacity of the cylinders for
which they are intended.
Model Shown:
CC10
C-CLAMPS, HYDRAULIC, AND ACCESSORIES CC TONNAGE RANGE: 5, 10, & 25 SERIES
A B C
D
E
F
G
H
I
Order
No.
Cap. A B C D E F G H I Use With
Cyl. No.
Prod.
Wt.
(ton) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (lbs.)
CC5 5 12.38 3.75 7.31 2.00 2.50 7.75 1 1/2” - 16 UN 0.88 3.00 C51C-C57C 25.00
CC10 10 15.88 6.00 9.81 2.00 3.00 10.75 2 1/4” - 14 UNS 0.88 3.50 C101C-C1010C 50.00
CC25 25 21.00 6.00 13.00 3.00 4.00 12.31 3 5/16” - 12 UNS 1.44 4.63 C251C-C2514C 96.00
Note: To minimize the effects of off-center loading, the
CC5, CC10 and CC25 should be used with the optional
350144 and 350145 swivel caps.
Ordering Information
Features
powerteam.com 214 ToolsC-CLAMPS, HYDRAULIC, AND ACCESSORIES
TONNAGE RANGE: 5, 10, & 25 CC
SERIES
Features
* May be used with CC5
** Must be used with a threaded adapter.
OTHER OPTIONAL ACCESSORIES WITH CC5, CC10 & CC25 HYDRAULIC CLAMPS
B
A
E
A B
C
D C D
A B
E
A B
C
D B
A
C D
C B
A
C
A
B
SWIVEL CAPS
Order
No.
Cap. A B
(ton) (in.) (in.)
350144 * 5 - 10 1.38 0.75
350145 25 2.00 1.00
PUSHING ADAPTERS
Order
No.
Cap. A B C D E
(ton) (in.) (in.) (in.) (in.) (in.)
201923** 10 3.13 2.25 5.38 0.50 1 - 8
34510** 25 3.25 2.63 5.88 0.75 1.25 - 7
THREADED ADAPTERS
Order
No.
Cap. A B C D
(ton) (in.) (in.) (in.) (in.)
38597 10 1 - 8 1 - 8 0.75 2.00
38953 25 1.5 - 16 1.5 - 16 2.75 4.38
PUSHING ADAPTERS
Order
No.
Cap. A B C D E
(ton) (in.) (in.) (in.) (in.) (in.)
201454** 10 3.06 2.63 5.69 0.75 1 - 8
34511** 25 3.25 2.63 5.88 1.00 1.25 - 7
V PUSHING ADAPTERS
Order
No.
Cap. A B C D
(ton) (in.) (in.) (in.) (in.)
34806** 10 2.63 1 - 8 1.50 1.00
34807** 25 3.13 1.25 - 7 1.75 1.25
PUSHING ADAPTERS
Order
No.
Cap. A B C
(ton) (in.) (in.) (in.)
25228** 10 2.38 1 - 8 1.50
28229** 25 2.88 1.25 - 7 1.75
PUSHING ADAPTERS
Order
No.
Cap. A B C
(ton) (in.) (in.) (in.)
309874* 5 2.03 2.78 0.63
215 powerteam.com
Tools
■ Punch smooth, precise holes in seconds. Much faster
than drilling.
■ Fully portable for construction, maintenance and service
applications, or can be mounted on a workbench for
production jobs.
■ Has carrying handle for precise locating.
■ Rugged, forged steel C-Frame for great strength and
durability.
■ Dual-action, spring-loaded stripper holds material
during punching operation, strips material from punch
on return. Scribe lines on stripper aid in locating the
punch.
Model Shown:
HP35S
HYDRAULIC PUNCHES AND ACCESSORIES HP TONNAGE RANGE: 35 SERIES
Order
No.
Cap. Max.
Oper.
Press.
Oil
Cap.
Max.
Material
Thickness
A B C D E F G H K L M N O P Q
(ton) (psi) (cu. in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.)
HP35 35 10,000 4.6 0.50 13.75 9.00 3.75 0.56 2.88 0.25 3.00 1.81 2.81 2.25 1.50 3.50 0.88 4.00 0.75
C B
A
L
E P
D
N
G
F
O
Q
M
H
K
Technical Dimensions
Mechanical Puller
Selection
RECOMMENDED PRODUCTS Optional Cylinders
The PE172 electric/hydraulic pump is an ideal power
source, which is included in item # HP35SP.
Features
powerteam.com 216 ToolsOrder
No.
Description Prod.
Wt.
(lbs.)
HP35 Punch only, includes metal case and die change tools. 42.50
HP35S Punch with punches and dies. Includes HP35 punch, metal case and 250459 punch/die set. 44.00
HP35P * Punch set with pump. Same as HP35SP, but does not include punch/die set. 86.30
HP35SP * Punch set with pump. Includes HP35 punch, PE172 electric/hydraulic pump, 9756 hose, 9798 hose half coupler, 250459 punch/die set, metal case. 87.80
250459 Punch/die set for round holes. Includes one each: PD437 0.44” punch/die, PD562 0.56” punch/die, PD688 0.69” punch/die, PD812 0.81” punch/die. 1.50
* NOTE: Available in 220VAC, 50 Hz. Order with suffix “-220”.
HYDRAULIC PUNCHES AND ACCESSORIES
TONNAGE RANGE: 35
Flat Die Coupling Nut Punch
PUNCH / DIE SETS FOR HP35 HYDRAULIC PUNCHES
Punch
Size
Punch
Style
Hole
Dia.
Punch with
Flat
Die Set
Punch with Bevel
Die Set
(in.) (in.)
0.25
Round
0.25 — —
0.31 0.31 PD313 —
0.38 0.38 PD375 PD375B
0.44 0.44 PD437 PD437B
0.53 0.53 PD531 PD531B
0.56 0.56 PD562 PD562B
0.69 0.69 PD688 —
0.78 0.78 PD781 —
0.81 0.81 PD812 —
Mechanical Puller
Selection Optional Coupling Nut Wrench Optional Cylinders
Order No. Description
252000 Makes punch/die changes easier without
“rounding-off” coupling nuts. Wt., 0.5 lbs.
Model Shown:
HP35SP
HP
SERIES
Ordering Information
217 powerteam.com
Tools
■ Accurately measure oil flow, pressure and temperature
on in-plant equipment, forklifts, machine tools and
more.
■ Temperature and flow readings are in Imperial and
Metric and accurate to within ±2% of full scale.
■ Dual pressure gauges for high and low pressure
readings. Low pressure gauge is automatically shut-off
and protected as pressure rises beyond its maximum
reading.
■ Automatic pressure compensating feature lets you
increase flow without affecting pressure setting.
■ Reverse flow through tester will not cause damage.
A replaceable safety disc ruptures if pressure exceeds
upper limit.
■ Solid state voltage regulator eliminates errors caused
by voltage change during testing.
Model Shown:
HT200
HYDRAULIC TESTERS HT GPM RANGE: 75 & 200 GPM SERIES
Order
No.
Max.
Flow
Scale Flow
Range
Max.
Oper.
Press.
Temp.
Scale
Range
Port
Sizes A B C
Prod.
Wt.
(gpm) (gpm) (l/min..) (psi.) (°F) (in.) (in.) (in.) (lbs.)
HT75 75 High 15 - 75 50 - 300 5,000 100 - 250 3/4\" NPT Swivel 13.75 11.88 5.75 18.20
Low 3 - 15 10 - 60
HT200 200 High 25 - 200 100 - 750 5,000 100 - 250 1 1/2\" SAE Split Flange 15.88 13.25 6.75 28.20 Low 5 - 40 20 - 150
75 AND 200 GPM IN-LINE HYDRAULIC TESTERS
B
A
C
Ordering Information
Features
powerteam.com 218 ToolsHYDRAULIC TESTER ACCESSORIES
GPM RANGE: 50, 75 & 200 GPM
AUXILIARY POWER CORDS FOR USE WITH 75 AND 200 GPM TESTERS
CAUTION: For use on negative ground systems only.
Order No. Description
37045 Auxiliary power cord. For use with any 12 or 24VAC battery to remotely power tester. Wt. 0.1 lb.
HOSES
Order No. Description
9785 Hose, 3/4\" I.D. x 3/4\" NPTF male both ends. 10 ft. length. 2,250 psi working pressure.
(2 req’d on 50 and 75 gpm testers). Wt., 0.7 lb.
9786 * Hose, 1\" I.D. x 1-1/4\" NPT male both ends. Recommended max. flow 90 gpm, with a working pressure of 4,000
psi. Wt., 14.0 lbs.
9787 * Hose, 1-1/4\" I.D. x 1-1/4\" NPT male both ends. Recommended max. flow 140 gpm, with a working pressure of
3,000 psi. Wt., 21.0 lbs.
9788 * Hose, 1-1/2\" I.D. x 1-1/2\" NPT male both ends. Recommended max. flow 200 gpm, with a working pressure of
2,500 psi. Wt., 25.0 lbs.
* Hose assemblies are all 4-ply spiral wound wire, 10 ft. long. For use with 200 gpm testers.
HOSE REDUCER BUSHINGS
Order No. Description
203264 Consists of two hose reducer bushings, 1-1/4\" NPT female x 1-1/2\" NPT male end.
Needed to adapt 9786 1\" I.D. hose and 9787 1-1/4\" I.D. hose to tester. Wt., 2.2 lbs.
Mechanical Puller
Selection Typical Set-up: Testing the pump, relief valve, and directional valve Optional Cylinders
TESTING A PUMP TESTING A RELIEF VALVE TESTING A DIRECTIONAL VALVE
Disconnect
Here
Disconnect
Here Disconnect
Here
Outlet Outlet Outlet
Inlet Inlet Inlet
Reservoir Reservoir Reservoir
Cyl. Cyl. Cyl.
Pump Pump Pump
Hydraulic
Tester
Hydraulic
Tester
Hydraulic
Tester
Directional
Valve
Directional
Valve Directional
Valve
Relief
Valve
Relief
Valve Relief
Valve
HT
SERIES
219 powerteam.com
HT200 HYDRAULIC TESTER ACCESSORIES Tools
203154
203017 203003
203155 203156
FLANGED HEAD ADAPTER UNIONS & SPLIT FLANGE KIT
Order No. Description
203154 Straight flange adapter. 1-1/2” flanged-head to 1-1/2” NPSM female swivel. Wt., 2.2 lbs.
203155 45° flange adapter. 1- 1/2” flanged-head by 1-1/2” NPSM female swivel. Wt., 3.2 lbs.
203156 90° flange adapter. 1-1/2” flanged-head by 1-1/2” NPSM female swivel. Wt., 4.2 lbs.
203017 Split Flange Kit. Consists of four flange halves and attaching bolts to permit use of 1-1/2” I.D. flange
adapters listed at left. Wt., 2.9 lbs.
FEMALE STRAIGHT FLANGE ADAPTER
Order No. Description
203003 Consists of two female straight flange adapters with attaching bolts. When attached to inlet/outlet ports,
allows connection of 1-1/2” NPT male hose ends to tester. Wt., 8.5 lbs.
Attach to the HT200 hydraulic tester by the use of flanged-head adapters and split flanges, or by a
set of female straight adapters.
HYDRAULIC TESTERS SERVICE ACCESSORIES
FITTINGS/ADAPTERS FOR THE 200 GPM TESTER
NOTE: The recommended maximum working pressure on the above fittings is 5,000 psi (except the 208402 is 3,000 psi).
16954 90° Swivel Adapter. 3/4\" NPTF male x
3/4\" NPSM female. Wt., 0.8 lb.
22041 Coupler. 3/4\" NPTF male x 3/4\"–16 female
ORB. Wt., 0.5 lb.
22042 Coupler. 3/4\" –16 female ORB x 1-1/16\"–
12 female 37° JIC. Wt., 0.4 lb.
22043 Coupler. 3/4\" –16 female ORB x 9/16\"–18
female 37° JIC. Wt., 0.4 lb.
22044 Coupler. 3/4\" –16 female ORB x 1/2\"– 20
female 37° JIC. Wt., 0.4 lb.
27737 Swivel Adapter. 3/4\" –16 male x 3/4\"
NPSM female. For use with No. 9785
hose, which has 3/4\" NPTF male thread.
Wt., 0.3 lb.
27287 Coupler. 3/4\" –16 UNF female ORB x
7/8\"–14 UNF female 37° JIC. Wt., 0.4
13449 Cap. 1-1/16\"–12 UNF female, 3/4\" O.D.
tube, 37° flare. Wt., 0.2 lb.
26068 45° Swivel Adapter. 1\" NPTF male x 3/4\"
NPSM female. Wt., 0.8 lb.
26069 Swivel Adapter. 1\" NPTF female x 3/4\"
NPSM female. Wt., 0.5 lb.
26070 Adapter. 1\" NPTF male x 3/4\" NPTF
female. Wt., 0.3 lb.
26071 Service Tee. 3/4\" NPTF female (2) x 3/4\"
NPTF male. Wt., 0.9 lb.
26072 Swivel Adapter. 3/4\" NPSM female x 1/2\"
NPTF male. Wt., 0.4 lb.
26073 Swivel adapter. 3/4\" NPTF female x 1/2\"
NPSM female. Wt., 0.3 lb.
26074 45° Swivel Adapter. 3/4\" NPSM female x
3/4\" NPTF male. Wt., 0.6 lb.
26075 Swivel Adapter. 3/4\" NPSM female x
3/4\" NPTF female. Wt., 0.4 lb.
26076 Swivel Adapter. 3/4\" NPTF male x 3/4\"
NPSM female. Wt., 0.4 lb.
26077 Cap. 3/4\" NPTF. Wt., 0.6 lb.
26078 Plug. 3/4\" NPTF. Wt., 0.3 lb.
26079 Adapter. 3/4\" NPTF female x 1-1/16\" –12
male ORB. Wt., 0.4 lb.
208402 45° Union Adapter. 7/8\"–14 UNF male
37° JIC x 3/4\" NPTF female. 3,000 psi
working pressure. Wt., 0.6 lb.
208401 45° Union Adapter. 7/8\"–14 UNF male
37° JIC x 3/4\" NPTF female. Wt., 0.7 lb.
206753 Coupler. 1-15/16\"–12 UNF female 37°
JIC x 3/4\" NPTF female. Wt., 1.1 lbs.
26666 Connector. 1-5/16\"–12 UNF male 37°
JIC x 3/4\" NPTF male. Wt., 0.4 lb.
28984 Straight Adapter. 3/4\" NPTF female x
1-3/16\" –12 UN male 37° JIC. Wt., 0.6 lb.
28985 Straight Adapter Union. 1-3/16\"–12 UN
female 37° JIC x 3/4\" NPTF female. Wt.,
1.3 lbs.
HYDRAULIC FITTINGS FOR USE WITH ALL TESTERS.
HT
ACC.
powerteam.com 220
RATCHETING CHAIN WRENCHES
Special head design allows you to turn wrench in
either direction. Ratcheting action makes it possible
to re-grip without removal. Fits parts of most any
size and shape.
Order No. Description
7400
Chain wrench, cap. 0.50\" to 4.75\"
O.D. (Capacity= 333 ft. lbs.) Handle
length: 12.50\". Wt., 2.0 lbs.
209199 Replacement chain with pin for 7400
chain wrench (16\" long).
7401
Chain wrench, cap. 3\" to 6.75\" O.D.
(Capacity= 666 ft. lbs.) Handle
length: 19.00\" Wt., 5 lbs.
209200 Replacement chain with pin for 7401
chain wrench (24\" long).
7163
7164
7165
7162
PRY BARS
Our rolling head pry bars are an extremely popular
and useful tool. Head may be used for almost any
prying job since a great deal of leverage can be
obtained. Long tapered body may be used as a
lining-up drift.
Order No. Description
7162 Pry bar; 0.38” round, 6” long. Wt., 0.3 lb.
7163 Pry bar; 0.44” round, 12” long. Wt., 0.6 lb.
7164 Pry bar; 0.56” round, 16” long. Wt., 1.1 lbs.
7165 Pry bar; 0.75” round, 18” long. Wt., 2.2 lbs.
JIMMY BARS
Ideal for general lifting or prying. Heat treated
chrome alloy steel to resist bending or breaking.
Order No. Description
7166 Jimmy bar; 0.63” round, 18” long.
Wt., 1.4 lbs.
7167 Jimmy bar; 0.75” round, 24” long.
Wt., 2.5 lbs.
7168 Jimmy bar; 0.88” round, 30” long.
Wt., 4.3 lbs.
7401
7400
ADJUSTABLE GLAND NUT WRENCH
Designed to handle 2\" to 6\" dia. hydraulic cylinder
gland nuts on many construction vehicles. Fits 0.25\"
and 0.31\" dia. pin holes. Features a 0.75\" sq. drive.
Order No. Description
1266 Adjustable gland nut wrench. Wt.,
3.0 lbs.
204928 Replacement pin for 1266
(2 required)
“MAJOR PERSUADER” JIMMY BARS
Two big jimmy bars for big jobs. Forged from
chrome alloy steel.
Order No. Description
7420 Jimmy bar; 0.88” round, 46” long.
Wt., 7.5 lbs.
7421 Jimmy bar; 1” round, 54” long. Wt.,
11.3 lbs.
ADJUSTABLE HOOK SPANNER WRENCH
Needed wherever turret adjusting nuts or packing
gland nuts are used. Adjust 1.5\" to 4\". Handle
overall length: 19\".
Order No. Description
885 Adjustable hook spanner wrench.
Wt., 3.0 lbs.
PLIERS, PRY BARS
AND WRENCHES
RETAINING RING PLIER KITS
Choose from four sets; internal ring, external ring and convertible pliers for either internal or external rings.
Order No. Description
7053K Replaceable tip pliers kit. This versatile kit contains (1) internal and (1) external pliers with (8) tip sets. Two
sets each: .038 dia. 90° bend, .047” dia. straight, .047\" dia. 90° bend, .070\" dia. straight. Recommended for
1/4\"–2\" rings. Packaged in plastic storage case. Wt., 0.8 lb.
7053K
Fed. Spec.:GGG-P-480-E
External Internal Convertible
RETAINING RING PLIERS SELECTION GUIDE
Order
No.
Type of
Pliers
Tip
Bend
Tip Size
Dia.
For Internal
Rings †
For External
Rings †
Bore Dia. Shaft Dia.
(in.) (in.) (in.)
1120 Convertible Str. 0.038 0.375 - 0.562 0.250 - 0.672
1125* Convertible 45° 0.038 0.375 - 0.562 0.250 - 0.672
1131** Convertible 90° 0.038 0.375 - 0.562 0.250 - 0.672
1320 Convertible Str. 0.047 0.625 - 1.023 0.687 - 0.875
1329 Convertible 90° 0.047 0.625 - 1.023 0.687 - 0.875
1340 Convertible Str. 0.070 1.062 - 1.750 0.938 - 1.438
1345* Convertible 45° 0.070 1.062 - 1.750 0.938 - 1.438
1349** Convertible 90° 0.070 1.062 - 1.750 0.938 - 1.438
* 45° Angled Tips
** 90° Angled Tips
CAUTION: Always wear safety goggles when using pliers
† Capacities are shown for basic style rings.
ToolsTOOL
SECTION
221 powerteam.com
O-RING SEAL PICKS
Even the seemingly simple job of removing and installing O-ring seals can be difficult without the aid of the proper tool. The
7312 is constructed with plastic & steel O-ring seal pick does the job with ease. Two special picks in set 7103 get right to the
trouble areas.
Order No. Description
7312 O-ring seal pick. Wt., 0.1 lb.
7103 Set of two O-ring seal picks. Wt., 0.1 lb.
7103
7312
UNIVERSAL OUTSIDE THREAD CHASER
Restore damaged threads on shafts, housings, cages, etc., for re-assembly of matching parts. Eliminates need for
thread-cutting equipment. Will not harm threads. V-pads and dies can be replaced. Cap. 1-1/4\" to 5\" O.D.
Order No. Description
7402 Thread chaser, complete (with 6 dies: threads per inch – 4, 5, 6, 7, 7.5, 8, 9, 10, 11, 11.5, 12, 14, 16, 18, 20
and 24). Wt., 4.5 lbs.
202817 Metric die set (3 dies: mm per thread: 1, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, and 4). Wt., 0.2 lb.
MAGNETIC PICK-UP TOOL
Has permanent magnetic head for retrieving parts from otherwise inaccessible places.
Order No. Description
7395 Pick-up tool with pocket clip. 6\" lg. Wt., 0.1 lb.
HTS50 HEAVY-DUTY PIPE SEALANT WITH PTFE
• Seals new or damaged threads; resists water, chemicals and oils.
• Replaces conventional tape methods; forms a clog-free seal.
• Effective at 10,000 psi.
When “plumbing” a hydraulic system, there’s now a better answer than tapes which can tear or shred, possibly plugging filters,
valves or gauges. This compound combines the lubricating qualities of PTFE with a fast curing anaerobic sealant. Seals all
metal fittings, plugs and threaded joints quickly and easily. Cures to form a permanent seal which is inert to hydrocarbons, most
acids, chemicals, solvents and steam. Allows adjustment up to 16 hours after assembly; won’t loosen under vibration. Prevents
galling of mating parts upon disassembly. Withstands temperatures from 65° F to +375° F.
Order No. Description
Note: Product labeling may vary from picture. HTS50 Sealant, 50 ml. tube. Wt., 0.4 lb.
MISCELLANEOUS TOOLS
Tools
TOOL
SECTION
powerteam.com 222 Tools
INFO SECTION
WORKSHEET
Tools
PULLERS
With the acquisition of Posi Lock, Power Team now offers a comprehensive line of mechanical and hydraulic pullers. These pullers are
available in a two-jaw or three-jaw configuration. Mechanical pullers
range from 1-40 ton capacity and hydraulic pullers range from 5-200
ton capacity. Turnkey packages are available to simplify your selection and setup. Additionally, specialty pullers, vises, and alignment
tools are now available.
Range includes:
• Mechanical Pullers
• Hydraulic Pullers
• Puller Sets
• Bi-Directional™Pullers
• High Tonnage Pullers
• Accessories & Adapters
223
Section /
Series Page Description Page(s)
Introduction Puller Basics, Basic Puller Scenarios & Choosing
the Right Puller 225-226
PT Posi Lock® Mechanical Pullers 227
PTTJ Posi Lock® Transmission Jaw Pullers 228
PTPM Posi Lock® Internal Slide Hammer Pullers 229
PTPM Posi Lock® Tool Board Sets 230
PTPMW
PTTK
PTTB
Posi Lock® Mechanical Puller Sets 231
PTHP
PTFR Posi Lock® Fan Removal Sets 232
PTPH Posi Lock® Hydraulic Pullers 233-236
PTPH Posi Lock® High Tonnage Hydraulic Pullers 237-240
PTPHS Posi Lock® Self-Contained Pullers 241
PTPH Posi Lock® Hydraulic Internal/External Pullers 242
1020-1027
1035-1050 Mechanical 2 & 3-Jaw Pullers 243-244
927-939 Michanical Bi-Directional™ Pullers 245-246
6981, SS2,
1178
Blind Hole Puller Set,
Slide Hammer Puller Set,
Slide Hammer
247
7136,
1173-1174,
1155-1158
Bearing Cup Remover, Pilot Bearing Pullers,
basic Slide Hammer Units, Reversible-Jaw Slide
Hammer Pullers, Slide Hammer Pullers w/Cup Pulling Attachements
248
PH63C, PH83C,
PH113C,
PH303C
Hydra Lock-Jaw™
2 & 3-Jaw Pullers 249
K82-K83,
HST11, 1188
Lock-Jaw™ Puller Accessories Kits
Hydraulic Straightening Tool, Long Jaw Set 250
PH Hydraulic Pullers 251-252
PPH Bi-Directional™ Hydraulic Pullers 253-254
PHP Bearing Pusher 255
PB Puller Blankets 256
MB Metal Boxes 256
PH Enforcer 55 & Enforcer 100 257-258
PR Roller Bearing Puller/Installer 259-260
1150-1154,
1165-1166,
1121-1130,
679-680
Pulling Attachments 261-262
Puller Adapters 263-264
INDEX
PULLERS SERIES
224
Pullers
225 powerteam.com
Pullers
MECHANICAL AND HYDRAULIC PULLERS
APPLICATION AND USE
You need a firm grip,
a straight pull and the
proper force…
Whether it’s a
gear, wheel
or bearing:
If you grip it
by its outer
edges and
apply force to
the shaft, you
can perform a
proper pulling
job.
Components Requiring Extraction
Primary Markets /
Applications
Bearing cups,
retainers and
seals must be
gripped through
their inside
diameters and
pulled straight
out to avoid
damage.
Gripping a shaft
and bracing
against the
housing for the
pull offers the
best solution
to this basic
pulling problem.
PT
SERIES
powerteam.com 226 PullersMECHANICAL AND HYDRAULIC PULLERS
QUICK SELECTION GUIDE
Puller Selection
HOW TO SELECT THE “RIGHT” PULLER
1. DETERMINE THE TYPE OF PULLER OR PULLER
COMBINATION
Which puller type is best for “getting a grip” on the part, internal or
external puller?
2. DETERMINE THE “REACH” NEEDED
The puller you select must have a “reach” equal to, or larger than, the
corresponding dimension of the job.
3. DETERMINE THE “SPREAD” NEEDED
The width of the part to be pulled will determine the “spread” required.
4. ESTIMATE THE FORCE REQUIRED
A puller with the proper “reach” and “spread” will usually have
enough power. When in doubt, always use the next larger size…
more power may be needed for rusted parts, or when the “area of
resistance” is large.
Considerations
The “area of resistance” or “area of press fit” can vary greatly between
seemingly similar jobs, such as in the example shown below. Study
each pulling job before you select the puller.
For manual, screw-powered pullers: The puller screw must be at least
half as large (in diameter) as the shaft of the pulling job.
Hydraulic pullers suggestion for selection: The maximum force exerted
in tons should be 7 to 10 times the diameter of the shaft in inches.
HOW TO MEASURE
“REACH” AND “SPREAD”
“Reach” and “spread” dimensions of the job
must first be determined. A typical example
- a component to be removed from a
shaft - is shown below. The length of the
protruding shaft and the thickness of the
component determine the “reach” needed.
The width of the component determines the
spread required.
Spread
Reach
SPREAD
REACH REACH
SPREAD
Tapered jaw design
allows clamping around
bearing for a perfect
pull.
Tapered roller bearing
on shaft.
Lock on ball grooves
and bearing races.
SPREAD
REACH
AREA OF
RESISTANCE
PT
SERIES
Pullers
227 powerteam.com
Pullers
Features
Long Jaws/Extra Long Jaw
Optional Accessories
Tip
Protector
Bolt
Extender
Transmission
Jaws
Order
No.
Cap. Jaws Bolt
Diameter
Reach Spread Weight
Long Jaw/
XL Jaw
Order No.
Reach Spread
Order No. Order
No. Order No.
Short
Tons Qty. in. (mm) in. (mm) in. (mm) lbs. (kg) in. (mm) in. (mm)
PT202 1 2 0.31 (7.9) 2.25 (57) 3.25 (82.6) 0.62 (0.28) — — — — —
PT203 2 2 0.37 (9.4) 3.00 (76.2) 4.50 (127) 1.12 (0.51) — — — — —
PT204 2 2 0.5 (12.7) 4.00 (102) 5.00 (127) 3 (1.36) — — — PTP4 PTX4 10454T
PT206 6 2 0.62 (15.8) 6.00 (152) 7.00 (178) 7 (3.18) — — — PTP6 PTX6 10654T
PT208 12 2 0.75 (19 ) 8.00 (203) 12.00 (305) 12 (5.44) PT208L /
PT208XL
9.8 (249) /
16.00 (406)
15.8 (401) /
22.00 (559) PTP10 PTX10 11054T
PT210 14 2 0.75 (19) 9.67 (246) 15.00 (381) 13 (5.9) PT210L 16.00
(406)
22.00
(559) PTP10 PTX10 11054T
PT213 25 2 1.12 (28.5) 12.00 (305) 18.00 (457) 38 (17.24) PT213L 20.00 (508) 30.00 (762) PTP13/16 —
PT216 35 2 1.25 (32) 14.00 (356) 25.00 (635) 57 (25.85) PT216L 26.00 (660) 38.00 (965) PTP13/16 —
PT102 1 3 0.31 (7.9) 2.25 (57) 3.25 (82.6) 0.68 (0.31) — — — — —
PT103 2 3 0.37 (9.4 ) 3.00 (76.2) 4.50 (114.3) 1.3 (0.59) — — — — —
PT104 5 3 0.5 (12.7) 4.00 (102) 5.00 (127) 4.1 (1.86) — — — PTP4 PTX4 10454T
PT106 10 3 0.62 (15.8) 6.00 (152) 7.00 (178) 8 (3.63) — — — PTP6 PTX6 10654T
PT108 17 3 0.75 (19) 8.00 (203) 12.00 (305) 14 (6.35) PT108L /
PT108XL
9.8 (249) /
16.00 (406)
15.8 (401) /
22.00 (559) PTP10 PTX10 11054T
PT110 20 3 0.75 (19) 9.67 (246) 15.00 (381) 16 (7.26) PT110L 16.00 (406) 22.00 (559) PTP10 PTX10 11054T
PT113 30 3 1.12 (28.5) 12.00 (305) 18.00 (457) 44 (19.96) PT113L 20.00 (508) 30.00 (762) PTP13/16 —
PT116 40 3 1.25 (32) 14.00 (356) 25.00 (635) 68 (30.84) PT116L 26.00 (660) 38.00 (965) PTP13/16 —
POSI-LOCK® PULLERS PT MECHANICAL PULLERS SERIES
PULLING BEARINGS IS A ONE-PERSON OPERATION
WHEN USING THE PT SERIES MECHANICAL PULLERS.
OPENING, CLOSING, LOCKING, AND ALIGNING
OF THE JAWS IS ALL DONE AUTOMATICALLY BY
SIMPLY TURNING THE T-HANDLE.
Model Shown:
PT110,
PT216
n 1 to 40-ton capacity puller with up to 14” (356 mm) reach
and 25” (635 mm) spread for large pulling requirements
n Mechanical pullers use a rolled center bolt thread to
reduce effort when applying high torque to extract
objects in a controlled manner
n Recessed nut to avoid mushrooming and disfiguring
n Slim tapered heat-treated tips allow for better gripping
and easier access in tight spots
n Safety Cage® guides jaws for fast set-up, solid contact
and superior safety
B
A
C
A B C
Ordering Information
powerteam.com 228 PullersFeatures
POSI-LOCK® PULLERS
TRANSMISSION PULLERS PTTJ
SERIES
Model Number
of Jaws
Reach Spread Weight Tip
Protector
Optional Accessories
Accessories Optional Jaws
Description Part # Jaw Style Reach Spread
in. (mm) in. (mm) lbs. (kg) in. (mm) in. (mm)
PTTJ-1 2
9.25
(235)
2.75 to 14.75
(70 to 375)
12
(5.4) PTP10 Bolt Extender PTX10
Jaw - 10854
8
(203)
.75 to 12
(19 to 305)
Long Jaw - 11054
10
(254)
2.25 to 15
(57 to 381)
Extra Long Jaw - 11054L
16
(406)
1.5 to 22
(38 to 559)
PTTJ-2 3
5.25
(133)
1 to 6.75
(25 to 171)
8
(3.6) PTP6
Bolt Extender PTX6
Jaw - 10654
6
(152)
.5 to 7
(13 to 178)
Slide Rod Adaptor PT10661
Slide Rod PT10561
2.5 lb Slide
Hammer PT10562
5.0 lb Slide
Hammer PT10563
PTTJ-3 3
4
(102)
.5 to 5.5
(13 to 140)
4.1
(1.9)
PTP4
TJ-3 Bolt Extender PTX4
Jaw - 10454
4
(102)
.5 to 5
(13 to 127)
Slide Rod PT10561
2.5 lb Slide
Hammer PT10562
5.0 lb Slide
Hammer PT10563
A standard jaw (left) is compared to a specially machined transmission jaw (right).
Jaws that clamp in snap-ring
grooves as narrow as .070\" (1.8 mm)
REMOVAL OF BEARINGS, BUSHINGS, SLEEVES
AND OTHER FRICTION-FITTED PARTS CAN
EASILY BE ACCOMPLISHED WITH USING THE
SERIES PTTJ AUTOMOTIVE TRANSMISSION
PULLERS.
Model Shown:
PTTJ-1,
PTTJ-2,
PTTJ-3
Ordering Information
n Pullers with up to 9.25” (235 mm) reach and
14.75” (375 mm) spread for large pulling
requirements
n Machined jaws that clamp in snap-ring grooves as
narrow as .070\" (1.8 mm).
n Specially designed for transfer cases on 4-wheeldrive vehicles, output shaft bearings and
numerous other applications on any vehicle
n Slim tapered heat-treated tips allow for better
gripping and easier access in tight spots
Pullers
229 powerteam.com
Pullers
Features
POSI-LOCK® PULLERS PT INTERNAL SLIDE HAMMER PULLER SERIES
Promotional Goods
Showcase your pullers with a
branded, reinforced pegboard
display in your showroom or shop.
Order No.
Kit
Components Description
PTPMI6
PT105 3-Jaw Internal Puller 1
PT10561 Slide Rod 24\" (609 mm) 1
PT10562 2.5 lb. (1.13 kg) Slide Hammer 1
PT10554L Long Jaw Set 1
2008508 Tool Board Kit, Posi Lock Tool Sets 1
PT10563 5 lb. (2.27 kg) Slide Hammer Optional
Model Number
of Jaws
Jaw
Style
Reach Spread
Range
Slide
Hammer
Weight
Dimensions Optional
Accessories
Overall
Length
Slide Rod
Diameter
Jaw Width Jaw Length Slide Hammer
Weight
in. (mm) in. (mm) lbs. (kg) in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg)
PTPMI6 3
Standard 2.78 (71) .56-4 (14-102) 2.5 (1.1) 29 (737) .52 (13) .33 (8) 6.62 (168) 5 (2.3)
Long 9 (229) 1-5.25(25-133) 2.5 (1.1) 31 (787) .52 (13) .33 (8) 8.62 (219) 5 (2.3)
A B C D E
B
D
C
A
B
BE
C
D
DURABLE SLIDE HAMMER WITH TIGHT GRIPPING
JAW DESIGN AND A SAFETY CAGE THAT GUIDES
JAWS FOR FAST SET-UP, AND SOLID CONTACT
FOR SUPERIOR SAFETY.
Model Shown:
PTPMI6
Ordering Information
n Long internal jaws with slim tapered heat-treated
tips allow for better gripping and easier access in
tight spots
n High force 2.5 lb (1.13 kg) slide hammer for an
effective use of force (optional ultra high force 5.0 lb
(2.27 kg) slide hammer)
n Includes 3-Jaw puller (model no. PT105)
n Includes promotional tool board
n Safety Cage® guides jaws for fast set-up, solid
contact and superior safety
powerteam.com 230 PullersFeatures
POSI-LOCK® PULLERS
PULLER DISPLAY SETS PTTM
SERIES
Peg Board Only
Order No. 2008508
ORDER NUMBER
Kit
Components Description PTPM4 PTPM4L PTPM4S PTPM5 PTPM6 PTMPS16
PTP13/16 TIP PROTECTOR for PT113 / PT213 / PT116 / PT216 — — — — — 4
PTP10 TIP PROTECTOR PT108 / PT208 / PT110 / PT21 1 2 — 1 2 4
PTP6 TIP PROTECTOR for PT106 / PT206 2 2 2 2 2 2
PTP4 TIP PROTECTOR for PT104 / PT204 1 — 2 1 2 2
PT216 PULLER, MANUAL 2 JAW - 35 TON — — — — — 1
PT213 PULLER, MANUAL 2 JAW - 25 TON — — — — — 1
PT210 PULLER, MANUAL 2 JAW - 14 TON — 1 — — 1 1
PT208 PULLER, MANUAL 2 JAW - 12 TON — — — — — 1
PT206 PULLER, MANUAL 2 JAW - 6 TON 1 1 1 1 1 1
PT204 PULLER, MANUAL 2 JAW - 2 TON — — 1 — 1 1
PT203 PULLER, MANUAL 2 JAW - 2 TON — — — — — 1
PT202 PULLER, MANUAL 2 JAW - 1 TON — — — — — 1
PT116 PULLER, MANUAL 3 JAW - 40 TON — — — — — 1
PT113 PULLER, MANUAL 3 JAW - 30 TON — — — — — 1
PT110 PULLER, MANUAL 3 JAW - 20 TON 1 1 — 1 1 1
PT108 PULLER, MANUAL 3 JAW - 17 TON — — — — — 1
PT106 PULLER, MANUAL 3 JAW - 10 TON 1 1 1 1 1 1
PT104 PULLER, MANUAL 3 JAW - 5 TON 1 — 1 1 1 1
PT103 PULLER, MANUAL 3 JAW - 2 TON — — — 1 — 1
PT102 PULLER, MANUAL 3 JAW - 1 TON — — — — — 1
2008508 TOOL BOARD KIT, POSI LOCK TOOL SETS 1 1 1 1 2 2
Peg Board with Pullers
Order No. PTPM4L
SHOWCASE YOUR PULLERS WITH A BRANDED,
REINFORCED PEGBOARD DISPLAY IN YOUR
SHOWROOM OR SHOP.
Model Shown:
PTP
Ordering Information
n 6 peg board promotional kits that offer many different
variations
n Order the peg board separately for even greater
flexibility
n Suitable for use behind a counter, parts desk or
showroom
Pullers
231 powerteam.com
Pullers
Features
POSI-LOCK® PULLERS PT MECHANICAL PULLERS SETS SERIES
Description Dimensions Part #
Manual Puller — PT107
Tip Protector — PTP4
Internal Puller Jaws — PT10554
Slide Rod PT10561
Slide Hammer 2.5 lb. (1.13 kg) PT10562
Internal Puller Long Jaw (3) — PT10554L
Case 34\" x 8.5\" x 4.5\" (15.8 lbs.)
864 x 216 x 114 mm (7.2 kg) —
Optional Accessories
Slide Hammer 5 lb. (2.27 kg) PT10563
Small Hub Collar 0\" to 1.5\" (0 to 38 mm) PTHP-30
Large Hub Collar 0\" to 2\" (0 to 51 mm) PTHP-40
Extra Large Hub Collar 0\" to 3\" (0 to 76 mm) PTHP-50
Tip Reducer/Extender — PTHP-70
Bolt Extender — PTX4
Transmission Jaw — PT10454T
Description Qty Number of
Jaws
Capacity
Tons (kN)
Reach
in. (mm)
PT102 Puller 1 3 1 ton (9 kN) 2.25 (57)
PT202 Puller 1 2 1 ton (9 kN) 2.25 (57)
PT103 Puller 1 3 2 tons (18 kN) 3 (76.2)
PT203 Puller 1 2 2 tons (18 kN) 3 (76.2)
Case 1 12\" x 17\" x 5\" (8 lbs.) 305 x 432 x 127 mm (3.6 kg)
Optional
PTPMW Tool board set 16\"x26\" (406x660 mm)
THESE PULLER SETS ARE ESSENTIAL IN REMOVING
INTERNAL PILOT BEARINGS, BEARING CUPS,
BUSHINGS, SEALS ALONG WITH EXTERNAL
BEARINGS, BEARING RACES, PULLEYS, AND MANY
OTHER PRESS-FIT ITEMS FROM ONE COMPACT SET.
Model Shown:
PTPMW-1
1 to 2 Ton Puller Set
Model Shown:
PTTK-107
4-in-1 Puller Set
Model Shown:
PTTB-1045
Internal/External
Slide Hammer Puller Set
Description Dimensions Part #
Manual Puller — PT107
Internal Puller — PT105
Tip Protector — PTP4
Slide Rod PT10561
Slide Hammer 2.5 lb. (1.13 kg) PT10562
Internal Puller Long Jaw (3) — PT10554L
Case 24\" x 16.5\" x 4.5\" (18.3 lbs.)
610 x 419 x 114 mm (8.3 kg) —
Optional Accessories
Slide Hammer 5 lb. (2.27 kg) PT10563
Small Hub Collar 0\" to 1.5\" (0 to 38 mm) PTHP-30
Large Hub Collar 0\" to 2\" (0 to 51 mm) PTHP-40
Extra Large Hub Collar 0\" to 3\" (0 to 76 mm) PTHP-50
Tip Reducer/Extender — PTHP-70
Bolt Extender — PTX4
Transmission Jaw — PT10454T
powerteam.com 232 PullersFeatures
POSI-LOCK® PULLERS
FAN REMOVAL SETS
PTHP/PTFR
SERIES
Description Dimensions Part #
Manual Puller — PT104
Small Collar Adaptor 0\" to 1.5\" (0 to 38 mm) PTHP-30
Large Collar Adaptor 0\" to 2\" (0 to 51 mm) PTHP-40
Tip Reducer/Extender PTHP-70
Square Head Set Screws (4) — PTHP-60
Case 13\" x 9.5\" x 5.5\" (9 lbs.)
330 x 241 x 140 mm (4.1 kg) —
Optional Accessories
Extra Large Hub Collar 0\" to 3\" (0 to 76 mm) PTHP-50
Hub Collar
Adaptor
Fan Hub
Tip Reducer/
Extender
PT104 Puller
Description Part #
Manual Puller PT104
Fan Removal Adaptor PTFR104
Fan Puller Tip Reducer PTX4F
Fan Removal Hub Screws (5) PTFR-60
Case —
Model Shown:
PTHP-1
Model Shown:
PTHP-2
Model Shown:
PTFR-104K
Fan Removal Adaptor Kit
for Wind Turbines
SIMPLIFY THE REMOVAL OF MANY INDUSTRIAL
AND AUTOMOTIVE FANS AND BLOWER WHEELS BY
PROVIDING A SOLID CONNECTION BETWEEN THE
PULLER AND FAN HUB.
Description Dimensions Part #
Small Collar Adaptor 0\" to 1.5\" (0 to 38 mm) PTHP-30
Large Collar Adaptor 0\" to 2\" (0 to 51 mm) PTHP-40
Tip Reducer/Extender — PTHP-70
Square Head Set Screws (4) — PTHP-60
Optional Accessories
Extra Large Hub Collar 0\" to 3\" (0 to 76 mm) PTHP-50
Includes
Includes
Includes
Pullers
233 powerteam.com
Pullers
Features
POSI-LOCK® PULLERS PTPH HYDRAUALIC PULLERS SERIES
KNOWN FOR SAFETY, DURABILITY, AND EASE OF
USE, POSI-LOCK PULLERS ARE DESIGNED TO HELP
EXTEND BEARING LIFE IN APPLICATIONS THROUGH
PROPER INSTALLATION, REMOVAL, AND SERVICE.
Model Shown:
PTPHB-116,
PTPHB-110
Mechanical Puller
Selection Puller Accessories Optional Cylinders
Order No. Puller
No. *
Storage Transport Cart
PTPT-2550 PTPHB-213
PTPT-2550 PTPHB-113
PTPT-2550 PTPHB-116
Power Team offers accessories to compliment your
puller. These accessories conveniently store, transport
and position your hydraulic pullers to maximize your
productivity.
n 5 to 50-ton capacity puller with up to 14” (356 mm) reach
and 25” (635 mm) spread for large pulling requirements
n 10,000 PSI (690 Bar) single-acting cylinder that allows
for high tonnage repeatable execution
n Slim tapered heat-treated tips allow for better gripping
and easier access in tight spots
2 Jaw 3 Jaw 2 Jaw 3 Jaw Dimensions
Standard Jaw
Order No.
Standard Jaw
Order No.
Cap.
Short Tons
Cylinder
Included
Reach
in. (mm)
Spread
in. (mm)
Long Jaw/ XL
Jaw
Order No.
Long Jaw/ XL
Jaw
Order No.
Reach
In. (mm)
Spread
In. (mm)
PTPHB-206 PTPHB-106 5 C55C 6 (152) .5 to 8 (13 to 203) --- --- - -
PTPHB-208 PTPHB-108 10 C106C 8 (203) .75 to 12
(19 to 305)
PTPHB-208L
PTPHB-208XL
PTPHB-108L
PTPHB-108XL
9.8 (249)
16 (406)
15.8 (401)
22 (559)
PTPHB-210 PTPHB-110 15 C1510C 9.67 (245) 1 to 15 (25 to 38) PTPHB-210L PTPHB-110L 16 (406) 22 (559)
PTPHB-213 PTPHB-113 25 C2514C 12 (305) 2.5 to 18
(64 to 457) PTPHB-213L PTPHB-113L 20 (508) 30 (762)
--- PTPHB-116 50 C5513C 14 (356) 3 to 25 (76 to 635) --- PTPHB-116L 26 (660) 38 (965)
Long Jaw/Extra Long Jaw Ordering Information
powerteam.com 234 PullersFeatures
POSI-LOCK® PULLERS
HYDRAULIC PULLERS PTPH
SERIES
THESE HYDRAULIC PULLERS DESIGNED TO HANDLE
REMOVING JOBS WITH A MINIMAL AMOUNT OF
EFFORT FOR THE ULTIMATE EFFICIENT PULLING
SOLUTION.
Model Shown:
PTPHC-110
n Puller Iron and Ram Point Set
n Hydraulic Cylinder
n Lift and Positioning Plate
n Two Speed Manually operated Pump
n Gauge Adapter, 10,000 PSI (690 Bar) Gauge
n 10' (3.05 m) heavy-duty Hose
n Male Coupler with dust cap
Mechanical Puller
Selection Included with the Kits* Optional Cylinders
n 5 to 50-ton capacity puller with up to 14” (356 mm) reach
and 25” (635 mm) spread for large pulling requirements
n Lightweight, two-speed manually operated 10,000 PSI
(690 Bar) hydraulic pump provides high oil volume
for fast cylinder piston approach, then the pump
automatically shifts to the high-pressure stage to move
the load
n 10,000 PSI (690 Bar) single-acting cylinder that allows
for high tonnage repeatable execution
2 Jaw 3 Jaw 2 Jaw 3 Jaw Dimensions
Standard Jaw
Order No.
Standard Jaw
Order No.
Cap.
Short
Tons
Cylinder
Included
Pump
Included
Reach
in. (mm)
Spread
in. (mm)
Long Jaw/ XL
Jaw
Order No.
Long Jaw/ XL
Jaw
Order No.
Reach
In. (mm)
Spread
In. (mm)
PTPHC-206 PTPHC-106 5 C55C P19L 6 (152) .5 to 8 (13 to 203) --- --- - -
PTPHC-208 PTPHC-108 10 C106C P19L 8 (203) .75 to 12 (19 to
305)
PTPHC-208L
PTPHC-208XL
PTPHC-108L
PTPHC-108XL
9.8 (249)
16 (406)
15.8 (401)
22 (559)
PTPHC-210 PTPHC-110 15 C1510C P59L 9.67
(245) 1 to 15 (25 to 38) PTPHC-210L PTPHC-110L 16 (406) 22 (559)
PTPHC-213 PTPHC-113 25 C2514C P159 12 (305) 2.5 to 18 (64 to
457) PTPHC-213L PTPHC-113L 20 (508) 30 (762)
--- PTPHC-116 50 C5513C P460 14 (356) 3 to 25 (76 to
635) --- PTPHC-116L 26 (660) 38 (965)
Long Jaw/Extra Long Jaw Ordering Information
Mechanical Puller
Selection Puller Accessories Optional Cylinders
Order No. Puller
No. *
Storage Transport Cart
PTPT-2550 PTPHC-213
PTPT-2550 PTPHC-113
PTPT-2550 PTPHC-116
Power Team offers accessories to compliment your
puller. These accessories conveniently store, transport
and position your hydraulic pullers to maximize your
productivity.
Pullers
235 powerteam.com
Pullers
Features
POSI-LOCK® PULLERS PTPH HYDRAUALIC PULLERS SERIES
5 TO 50-TON CAPACITY HYDRAULIC PULLERS
KITS ARE AVAILABLE IN 2- OR 3-JAW MODELS
AND OFFER MANY OPTIONS FOR FLEXIBILITY
WITH ANY PROJECT.
n Puller Iron and Ram Point Set
n Hydraulic Cylinder
n Lift and Positioning Plate
n 2 Stage Electric Pump
n Gauge Adapter, 10,000 PSI (690 Bar) Gauge
n 10' heavy-duty Hydraulic Hose
n Male Coupler with dust cap
Mechanical Puller
Selection
Optional Cylinders
Included with the Kits*
Model Shown:
PTPHD-110
n 5 to 50-ton capacity puller with up to 14” (356 mm)
reach and 25” (635 mm) spread for large pulling
requirements
n PE17 Series lightweight, 10,000 PSI (690 Bar)
heavy-duty electric pump for reliable performance
use after use
n 10,000 PSI (690 Bar) single-acting cylinder that
allows for high tonnage repeatable execution
*Standard models supplied with 115v 50/60hz pump. For other voltage options, please contact technical support.
2 Jaw 3 Jaw 2 Jaw 3 Jaw Dimensions
Standard Jaw
Order No.*
Standard Jaw
Order No.*
Cap.
Short
Tons
Cylinder
Included
Pump
Included
Reach
in. (mm)
Spread
in. (mm)
Long Jaw/ XL
Jaw
Order No.*
Long Jaw/ XL
Jaw
Order No.*
Reach
In. (mm)
Spread
In. (mm)
PTPHD-206 PTPHD-106 5 C55C PE17 6 (152) .5 to 8 (13 to 203) --- --- - -
PTPHD-208 PTPHD-108 10 C106C PE17 8 (203) .75 to 12 (19 to
305)
PTPHD-208L
PTPHD-208XL
PTPHD-108L
PTPHD-108XL
9.8 (249)
16 (406)
15.8 (401)
22 (559)
PTPHD-210 PTPHD-110 15 C1510C PE17 9.67
(245) 1 to 15 (25 to 38) PTPHD-210L PTPHD-110L 16 (406) 22 (559)
PTPHD-213 PTPHD-113 25 C2514C PE17 12
(305)
2.5 to 18 (64 to
457) PTPHD-213L PTPHD-113L 20 (508) 30 (762)
--- PTPHD-116 50 C5513C PE17 14
(356)
3 to 25 (76 to
635) --- PTPHD-116L 26 (660) 38 (965)
Long Jaw/Extra Long Jaw Ordering Information
Mechanical Puller
Selection Optional Cylinders Puller Accessories
Order No. Puller
No. *
Storage Transport Cart
PTPT-2550 PTPHD-213
PTPT-2550 PTPHD-113
PTPT-2550 PTPHD-116
Power Team offers accessories to compliment your
puller. These accessories conveniently store, transport
and position your hydraulic pullers to maximize your
productivity.
powerteam.com 236 PullersFeatures
POSI-LOCK® PULLERS
HYDRAULIC PULLERS PTPH
SERIES
FOR THOSE BIG JOBS, THIS 50-TON PULLER SET IS
WHAT YOU NEED. JUST THINK OF THE JOBS YOU
CAN DO WITH THIS PULLER WITH THE INCLUDED
EASY TO MANEUVER CART THAT RAISES TO A
HEIGHT OF 55” (1397 MM).
n 50-ton puller, model PTPH-116
n Standard and long jaw sets
n Ram Point Set
n PTC-50T cart
n 50-Ton Hydraulic cylinder
n 10,000 PSI (690 Bar) electric two-stage pump, remote
jog switch on electric pump with 10' cord (3.05 m)
n 10' (3.05 m) hose
n Gauge, coupler
n Lift and Positioning Plate
n 6\" (152 mm) and 12\" (305 mm) ram extenders
Mechanical Puller
Selection Optional Cylinders Included with the 50 Ton Pullers
Model Shown:
PTPH-50T
Shown with long jaws
n 50-ton capacity puller with 14” (356 mm) reach and
25” (635 mm) spread for large pulling requirements
n PE17 Series lightweight, two-stage,10,000 PSI (690
Bar) heavy-duty electric pump for reliable performance
use after use
n Remote jog switch with a 10’ (3 m) cords allows for
additional worker safety
n 10,000 PSI (690 Bar) single-acting cylinder that allows
for high tonnage repeatable execution
n Flexible mounting platform allows puller to swivel 360
degrees for easy accessibility to any project
Model
Number*
Capacity
Tons
Number
of Jaws
Reach Spread Weight of Set**
Long Jaws
Part Number Reach Spread
Tons (kN) in. (mm) in. (mm) lbs. (kg) in. (mm) in. (mm)
PTPH-50T 50 tons (445 kN) 3 14 in.
(356 mm)
3 to 25 in.
(76 to 635 mm)
320 lbs
(145 kg) PTPH-11654L 26 in.
(660 mm)
2 to 38 in.
(51 to 965 mm)
*Standard models supplied with 115v 50/60hz pump. For other voltage options, please contact technical support.
**Weight does not include hydraulic components due to variances in weight.
Ordering Information
Mechanical Puller
Selection Optional Cylinders Hydraulic Puller Suggestion For Selection
The maximum force exerted in tons should be 7 to 10
times the diameter of the shaft in inches; for example,
a 1.5\" (38 mm) diameter shaft would generally require
a 15-ton puller.
237 powerteam.com
Pullers
Features
POSI-LOCK® PULLERS PTPH HIGH TONAGE HYDRAULIC PULLERS SERIES
Vertical 100-Ton Hydraulic Puller | PTPH-102TV
The 100-Ton vertical hydraulic puller was designed for big pulling
jobs with limited jaw placement options. This two-jaw vertical puller
is available with a single or double acting cylinder. This versatile
puller can also be used in a suspended position.
100 HYDRAULIC PULLERS PROVIDE MAXIMUM
EXTRACTION FORCE IN APPLICATIONS
REQUIRING HIGH FORCE REMOVAL OF LARGE
PRESS FIT PARTS.
The PTPH-123T combination 100-ton puller transforms
from a 2-jaw to a 3-jaw puller in 4 easy steps.
Mechanical Puller
Selection PosiLock Safety Insight Optional Cylinders
Adjustable jaw tips
Lifting eyes can be used
to lift puller off cart Adjustable jaw
guide
Model Shown:
PTPH-100T
n 100-ton capacity puller with 50” (1270 mm) reach
and 70” (1778 mm) spread for extra-large pulling
requirements
n Hydraulic-actuated lift cart extends vertically up to 5’
(1.52 m) to align easily with project
n Lifting brackets allow the puller to be removed from
the cart and lifted into workplaces
n PE55 Series lightweight, two-stage 10,000 PSI
(690 Bar) heavy-duty electric pump for reliable
performance use after use
n 10,000 PSI (690 Bar) single-acting 10.25” (260
mm) stroke cylinder with spring return for ease of
compression and retraction. (Optional double-acting
cylinder available)
n Available in 2-jaw, vertical 2-jaw, 3-jaw, or 2/3-jaw
combination to allow a wide range of flexibility with
any project
powerteam.com 238 PullersPOSI-LOCK® PULLERS
HIGH TONAGE HYDRAULIC PULLERS PTPH
SERIES
Model Number* Capacity Number of
Jaws
Dimensions
Weight Spread Overall Length Reach Jaw Length Jaw Tip Width Tip Clearance Tip Depth
Tons (kN) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg)
Single Acting
PTPH-102T
100 tons
(890 kN) 2 7.5 to 70 in.
(191 to 1778 mm)
77 in.
(1956 mm)
50 in.
(1270 mm)
53 in.
(1346 mm)
1.25 in.
(32 mm)
3.5 in.
(89 mm)
3.5 in.
(89 mm)
1700 lbs.
(771 kg)
PTPH-100T
100 tons
(890 kN) 3 7.5 to 70 in.
(191 to 1778 mm)
77 in.
(1956 mm)
50 in.
(1270 mm)
53 in.
(1346 mm)
1.25 in.
(32 mm)
3.5 in.
(89 mm)
3.5 in.
(89 mm)
1950 lbs.
(885 kg)
PTPH-123T
100 tons
(890 kN) 2/3 7.5 to 70 in.
(191 to 1778 mm)
77 in.
(1956 mm)
50 in.
(1270 mm)
53 in.
(1346 mm)
1.25 in.
(32 mm)
3.5 in.
(89 mm)
3.5 in.
(89 mm)
2000 lbs.
(907 kg)
Single Acting Vertical
PTPH-102TV
100 tons
(890 kN) 2 7.5 to 70 in.
(191 to 1778 mm)
77 in.
(1956 mm)
50 in.
(1270 mm)
53 in.
(1346 mm)
1.25 in.
(32 mm)
3.5 in.
(89 mm)
3.5 in.
(89 mm)
1800 lbs.
(816 kg)
Double Acting
PTPH-102TDA
100 tons
(890 kN) 2 7.5 to 70 in.
(191 to 1778 mm)
77 in.
(1956 mm)
50 in.
(1270 mm)
53 in.
(1346 mm)
1.25 in.
(32 mm)
3.5 in.
(89 mm)
3.5 in.
(89 mm)
1800 lbs.
(816 kg)
PTPH-100TDA
100 tons
(890 kN) 3 7.5 to 70 in.
(191 to 1778 mm)
77 in.
(1956 mm)
50 in.
(1270 mm)
53 in.
(1346 mm)
1.25 in.
(32 mm)
3.5 in.
(89 mm)
3.5 in.
(89 mm)
2050 lbs.
(930 kg)
PTPH-123TDA
100 tons
(890 kN) 2/3 7.5 to 70 in.
(191 to 1778 mm)
77 in.
(1956 mm)
50 in.
(1270 mm)
53 in.
(1346 mm)
1.25 in.
(32 mm)
3.5 in.
(89 mm)
3.5 in.
(89 mm)
2100 lbs.
(953 kg)
Double Acting Vertical
PTPH-102DATV
100 tons
(890 kN) 2 7.5 to 70 in.
(191 to 1778 mm)
77 in.
(1956 mm)
50 in.
(1270 mm)
53 in.
(1346 mm)
1.25 in.
(32 mm)
3.5 in.
(89 mm)
3.5 in.
(89 mm)
1800 lbs.
(816 kg)
A B C D E F G
max. 66.54 in.
(1690 mm)
min. 26.50 in.
(673 mm)
77.95 in.
(1980 mm)
40.98 in. (1041 mm)
A
E
F
B
C
G
n PE55 electric two-stage pump, 10,000 PSI (690 Bar)
n 100-ton cylinder 10,000 PSI (690 Bar), single acting
with return spring 10.25\" (260 mm) stroke (Optional
double-acting cylinder available)
n Remote jog switch with 10' cord (3.05 m)
n Hydraulic-actuated lift cart extends puller from
ground to a height of 5' (1.52 m)
n Multiple pushing adaptors
1 - 3.5\" diameter x 9\" (89 x 229 mm)
1 - 3.5\" diameter x 19\" (89 x 483 mm)
1 - 3.5\" diameter x 29\" (89 x 737 mm)
1 - Coupler
n Adjustable jaw tips and guides (Custom jaw tips available)ght
Mechanical Puller
Selection Included with the 100 Ton Pullers Optional Cylinders
Ordering Information
Technical Information
D
77.95 in.
(1980 mm)
max. 66.54 in.
(1690 mm)
min. 26.50 in.
(673 mm)
40.98 in. (1041 mm)
*Standard models supplied with 115v 50/60hz pump. For other voltage options, please contact technical support.
239 powerteam.com
Pullers
Features
POSI-LOCK® PULLERS PT HIGH TONAGE HYDRAULIC PULLERS SERIES
PROVIDES ULTIMATE HYDRAULIC PULLER
MUSCLE FOR THE REMOVAL OF STUBBORN
GEARS, BEARINGS, AND WHEELS
FROM HEAVY MINING, RAILROAD, AND
CONSTRUCTION MACHINERY.
200 Ton cylinder used in this pulling application.
Model Shown:
PTPH-200T
Mechanical Puller
Selection Hydraulic Puller Suggestion For Selection Optional Cylinders
The maximum force exerted in tons should be 7
to 10 times the diameter of the shaft in inches;
for example, a 1.5\" (38 mm) diameter shaft would
generally require a 15-ton puller.
n 200-ton capacity puller with 48” (1219 mm) reach
and
70” (1778 mm) spread for extra-large pulling
requirements
n PE55 Series lightweight, two-stage 10,000 PSI
(690 Bar) heavy-duty electric pump for reliable
performance use after use
n 10,000 PSI (690 Bar) double-acting 13.25” (337
mm) stroke cylinder for ease of compression and
retraction
n Hydraulic-actuated lift cart extends vertically up to
5’ (1.52 m) to align easily with project
n Remote jog switch with a 10’ (3m) cords allows for
additional worker safety
powerteam.com 240 PullersPOSI-LOCK® PULLERS
HIGH TONAGE HYDRAULIC PULLERS PTPH
SERIES
max. 66.85 in.
(1698 mm)
min.
26.85 in.
(682 mm)
26.28 in.
(668 mm)
A
E
F
B
C
G
HT-1180S
HT-1180A
HT-1180*
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0.0 in.
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
*PTHT-1180 tips come
standard with all 100
and 200-ton pullers.
Optional Jaw Tips
All jaws are 3 in.
(76 mm) thick.
PTHT-1180S
PTHT-1180A
PTHT-1180*
n PE55 electric two-stage pump, 10,000 PSI (690 Bar)
n 200-ton cylinder 10,000 PSI (690 Bar), double
acting 13.25\" (337 mm) stroke
n Remote jog switch with 10' cord (3.05 m)
n Hydraulic-actuated lift cart extends puller from ground
to a height of 5' (1.52 m)
n Jaws are hydraulically controlled with cylinders
n Multiple pushing adaptors
1 - 4\" diameter x 9\" (102 x 229 mm)
1 - 4\" diameter x 19\" (102 x 483 mm)
1 - 4\" diameter x 29\" (102 x 737 mm)
1 - 4\" diameter x 39\" (102 x 990 mm)
n Adjustable jaw tips and guides (Custom jaw tips
available)iLock Safety Insight
Mechanical Puller
Selection Included with the 200 Ton Pullers Optional Cylinders
D
Technical Information
max. 66.85 in.
(1698 mm)
min.
26.85 in.
(682 mm)
26.28 in.
(668 mm)
max. 66.85
(1698 mm)
max. 26.28
(668 mm)
min.
26.85 in.
(682 mm)
Model
Number*
Capacity Number
of
Jaws
Dimensions
Weight Spread Overall Length Reach Jaw Length Jaw Tip Width Tip Clearance Tip Depth
Tons (kN) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg)
PTPH-200T
200 tons
(1779 kN)
4
8 to 70 in.
(203 to 1778
mm)
78.5 in.
(1994 mm)
48 in.
(1219 mm)
53 in.
(1346 mm)
1.25 in.
(32 mm)
3.5 in.
(89 mm)
3.5 in.
(89 mm)
4150 lbs.
(1882 kg)
A B C D E F G
Ordering Information
*Standard models supplied with 115v 50/60hz pump. For other voltage options, please contact technical support.
Pullers
241 powerteam.com
Pullers
Features
POSI-LOCK® PULLERS PTPHS SELF-CONTAINED PULLERS SERIES
THESE POWERFUL, SELF-CONTAINED PULLING
SYSTEMS ARE IDEAL FOR PULLING A WIDE
VARIETY OF PRESS-FIT PARTS, INCLUDING
BEARINGS, GEARS, BUSHINGS, WHEELS, AND
PULLEYS. YOU GET THE EASE OF A MANUAL
PULLER WITH THE POWER OF HYDRAULICS.
Model Shown:
PTPHS-108,
PTPHS-208
Mechanical Puller
Selection Long Jaws Optional Cylinders
When ordering optional long jaws, extension
rods should also be ordered to extend length
of ram.
n 108 or 208 puller assembly with standard length
jaws with a reach up to 8” (203 mm) and a 12” (305
mm) spread
n Self-contained pump/cylinder with swiveling
adjustable-length pump handle for ease of use at
any angle
n Multiple extension rod parts that includes a 1.9\"
(48 mm) and two 2.9\" (74 mm) extension rods with
centering tips for versatility with any project
n T-handle facilitates the opening, closing, locking,
and aligning of the jaws for easy operation
n Safety cage guides jaws for quick setup, providing a
“vise-like” grip reducing slippage
2 Jaw 3 Jaw 2 Jaw 3 Jaw Dimensions
Standard Jaw
Order No.
Standard Jaw
Order No.
Cap.
Short Tons
Jaw Reach
in. (mm)
Spread
in. (mm)
Long Jaw/ XL
Jaw
Order No.
Long Jaw/ XL
Jaw
Order No.
Reach
In. (mm)
Spread
In. (mm)
PTPHS-208 PTPHS-108 12 10854 8 (203) .75 to 12 (19 to
305)
PTPHS-208L
PTPHS-208XL
PTPHS-108L
PTPHS-108XL
9.8 (249)
16 (406)
15.8 (401)
22 (559)
Long Jaw/Extra Long Jaw Ordering Information
powerteam.com 242 PullersFeatures
POSI-LOCK® PULLERS
HYDRAULIC INT/EXT PULLERS PTPH
SERIES
Order No. Number of
Jaws
Part
Number
Jaw
Style
Reach
in. (mm)
Spread
in. (mm)
Overall Length
in. (mm)
Jaw Width
in. (mm)
Jaw Length
in. (mm)
PTPH-113IE
3 11354T Internal 7 (178) 8 to 21 (203
to 533) 25.75 (654) 1.25 (32) 10.9 (277)
3 11354 External 12 (305) 2.5 to 18 (64
to 457) 27 (686) 1.25 (32) 13.7 (348)
OPTIONAL 3 11354L External
Long 20 (508) 1.5 to 30 (38
to 762) 36 (914) 1.25 (32) 21.6 (549)
INTERNAL/EXTERNAL PULLING MADE EASY.
FUNCTIONS WITH A PTPHB, PTPHC, AND PTPHD
HYDRAULIC 5 TO 50-TON CAPACITY PULLERS
TO ALLOW THE FLEXIBILITY OF INTERNAL OR
EXTERNAL PULLING.
Ordering Information
Model Shown:
PTPH-113IE (Internal/External)
n External pulling up to 20” (508 mm) reach and
30” (762 mm) spread for large pulling requirements
n Internal pulling up to 7” (178 mm) reach and
21” (533 mm) spread for an effective range of internal
pulling capabilities
n Safety cage houses either the internal or external jaws
by simply removing the ball lock pins that allows you to
change from internal to external in seconds
n Slim tapered heat-treated tips permit better gripping and
easier access in tight spots
243 powerteam.com
Pullers
Features Model Shown:
1024
MECHANICAL JAW PULLERS
2 & 3-JAW PULLERS
Step plate
Pulling attachment
Shaft protector
Mechanical Puller
Selection Choosing the right size puller Optional Cylinders
Compare the “reach” and “spread” of the
pulling job with that of the pullers listed.
The puller selected must have dimensions
greater than those of the job.
Styles of puller cross heads
2-Jaw
head
3-Jaw
head
2/3-Jaw
combination
■ Lock-Jaw™ feature on all pullers. The harder the pull,
the tighter the grip for removing gears, bearings and
countless other press fitted parts.
■ 2-way, 3-way and 2/3-way combination pullers make it
easy to select a specific puller for your application.
■ Forged from high quality steel, heat treated and
subjected to rigorous tests which exceed rated puller
capacity.
■ Forcing screw threads are rolled, not cut, creating a
smoother and stronger thread.
■ Heat treated alloy steel cross bolts for maximum shear
strength.
■ Machined puller jaw toes produce larger and stronger
pulling toes.
■ Meets Fed. Spec.: GGG-P-00781-D
VERSATILE DESIGN OFFER A TIGHT GRIP FOR
YOUR PULLING APPLICATIONS.
Two-jaw head puller example.
MP
SERIES
powerteam.com 244 PullersMECHANICAL JAW PULLERS
2 & 3-JAW PULLERS
Jaw width
Jaw thickness
Reach
Reach
Spread
Order
No.
Cap. Jaw
Type
Max. Jaw Screw
Size
Weight
Reach Spread Thickness Width
(tons) (in.) (in.) (in.) (in.) (in.) (lbs.)
1020
1
2-Jaw 2.13 3.25
0.14 0.25 5/16 - 24 x 3.88
0.31
1021 3-Jaw 2.13 3.25 0.31
1022
2
2-Jaw * 3.38 4.00
Upper 0.19
Lower 0.13
Upper 0.25
Lower 0.50 3/8 - 24 x 4.88
0.88
1023 2/3-Jaw * 3.38 4.75 0.88
1024
5
2/3-Jaw * 3.25 6.00
Upper 0.31
Lower 0.25
Upper 0.38
Lower 0.50 9/16 - 20 x 6.94
0.75
1026 2/3-Jaw * 3.25 7.00 0.75
1025
5
Long 2-Jaw * 5.50 6.00
Upper 0.31
Lower 0.25
Upper 0.38
Lower 0.75 9/16 - 20 x 6.94
2.00
1027 Long 2/3-Jaw * 5.50 7.00 3.63
1035
7
2-Jaw * 5.00 9.00
Upper 0.31
Lower 0.34
Upper 1.00
Lower 1.00 11/16 - 18 x 9.00
4.50
1037 2/3-Jaw * 5.00 10.50 6.13
1036
7
Long 2-Jaw 8.75 9.50
0.34 1.00 11/16 - 18 x 9.00
5.38
1038 Long 2/3-Jaw 8.75 11.00 8.13
1039
13
2-Jaw 11.00 12.00
0.56 1.00 13/16 - 16 x 12.00
10.81
1040 Long 2-Jaw 15.25 15.50 13.00
1041 2/3-Jaw 11.00 12.00 16.25
1042 Long 2/3-Jaw 15.25 17.00 18.75
1043
17.5
Long 2-Jaw 14.50 14.00 0.56 1.00
1 - 14 x 13.50
23.00
1044 Long 2-Jaw 18.75 16.00
0.81 1.28
26.00
1045 3-Jaw 14.50 14.00 33.00
1046 Long 3-Jaw 18.75 16.00 37.00
1048
25
Long 2-Jaw 22.25 20.00
1.06 1.50 1 1/4 - 12 x 16.63
42.75
1050 Long 3-Jaw 22.25 20.00 60.00
1020
1022
1024
1024
1035
1036
1039/1040
1043/1044
1048
1021
1023
1026
1026
1037
1038
1041/1042
1045/1046
1050
* Reversible Jaws
Ordering Information
MP
SERIES
245 powerteam.com
Pullers
Features
MECHANICAL BI-DIRECTIONAL™ PULLERS
10, 17.5, & 30 TON CAP.
Model Shown:
927,
938,
939
ASSEMBLING THE TOOL TO APPLY PUSHING OR PULLING FORCE:
Sliding Plate
Sliding Plate
Nut
Nut
Pulling
Force
Pulling
Force
Pushing
Force
Pushing
Force
p p
p
Pulling
Force
p p
p
Pushing
Force
1. Determine if you want the tool’s
forcing screw to push or pull.
2. To exert pushing force, the forcing nut
is installed beneath the cross block,
as shown on left.
3. To cause the forcing screw to pull,
the forcing nut is placed on top of the
cross block.
4. The sliding plates must always be
placed on the opposite side of the
cross block from the forcing nut.
Mechanical Puller
Selection Selection and Capacity Rating Optional Cylinders
Each Bi-Directional™ Puller specified tonnage
“capacity” is determined using its standard legs in
tension. Using longer legs, or a setup in which the legs
are in compression, will reduce the “capacity.” Always
select the largest “capacity” puller and the shortest legs
that will fit the job.
Mechanical Puller
Selection Puller Adapters Optional Cylinders
Male/Female Shaft Protector Female Step Plate
For more information, see page 240.
■ Can apply a pushing or pulling force, depending on how
the puller is set up.
■ Optional leg kits adapt your Bi-Directional™ Puller to
extra long or extra short reach.
■ A wide variety of threaded adapters, bearing pulling
attachments and internal pulling attachments can be
used in combination with our Bi-Directional™ Puller.
■ Meets Fed. Spec.: GGG-P-00781-D
VERSATILE DESIGN OFFERS A TIGHT GRIP FOR
YOUR PULLING APPLICATIONS.
MP
SERIES
powerteam.com 246 PullersMECHANICAL BI-DIRECTIONAL™ PULLERS
10, 17.5, & 30 TON CAP.
17.5 TON MECHANICAL BI-DIRECTIONAL™
17.5 Ton Capacity can be used with 1124 and 1130 bearing pulling attachments or 679
and 680 pulley pulling attachments. May also be used with 1150, 1151, 1153, 1165, or
1166 internal pulling attachments.
Order
No.
Max. Screw
Size
Weight Notes
Reach Spread
(in.) (in.) (in.) (lbs.)
938 11.13 3.13 - 11.75 1 - 14 x 13.25 20.75 Leg ends threaded 5/8\"–18. 1106 legs and 24827 leg ends
included.
Spread
3.13\" – 11.75\"
10 TON MECHANICAL BI-DIRECTIONAL™
10 Ton Capacity can be used with 1123 bearing pulling attachment or 679 pulley
pulling attachment. May also be used with 1150, 1151, 1152, or 1153 internal pulling
attachments.
Spread
2.13\" – 7.25\"
Order
No.
Max. Screw
Size
Weight Notes
Reach Spread
(in.) (in.) (in.) (lbs.)
927 8.25 2.13 - 7.25 3/4 - 16 x 12.00 7.00 1/2\" of forcing screw tip end is threaded 5/8\"–18.
1100 legs and 24827 leg ends included.
30 TON MECHANICAL BI-DIRECTIONAL™
30 Ton Capacity can be used with 1126 and 1127 bearing pulling attachments or 680
pulley pulling attachment (two 8012 adapters are required to connect 680 to puller).
Can be used with 1165 internal pulling attachment.
Spread
2.13\" – 7.25\"
Order
No.
Max. Screw
Size
Weight Notes
Reach Spread
(in.) (in.) (in.) (lbs.)
939 10.50 7.00 - 16.25 1 1/2 - 12 x 17.25 44.00 Leg ends threaded 1\"–14. 1109 legs and 28390 leg ends
included.
Order
No.
Leg
Length
Weight
(in.) (lbs.)
927
1103 4.75 1.00
1100 6.75 1.50
1102 11.75 2.25
1101 15.75 3.25
938
1107 4.50 2.50
1106 9.50 4.50
Order
No.
Leg
Length
Weight
(in.) (lbs.)
938
1104 16.50 6.50
1105 22.50 9.00
1108 30.00 11.50
939
1109 8.00 8.00
1110 18.00 15.00
1111 28.00 22.00
ACCESSORIES - PULLER LEGS
Ordering Information
MP
SERIES
247 powerteam.com
Pullers
SLIDING HAMMERS ONLY
Order No. Description
22185 2.5 lb. Sliding Hammer.
34331 5.0 lb. Sliding Hammer.
22185 34331
SLIDE HAMMER PULLER SET
This useful set contains a reversible-jaw slide hammer puller with a 2.5 lb. sliding hammer plus an assortment of special jaws
(3 of each size) and adapters. In this set, you get all the versatility you demand of a slide hammer puller.
Order No. Description
1178 Slide hammer puller set with 2.5 lb. sliding hammer. Wt., 13.80 lbs.
44195 3”
32054 34698 2” 1.25\"
4.5\"
44148 1156
27315 27241
36578
Jaw
Order No.
2-Jaw Spread 3-Jaw Spread
Inside Outside Inside Outside
Min. Max. Min. Max. Min. Max. Min. Max.
(in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.)
44195 1.50 4.50 0.75 5.00 1.50 4.75 1.00 4.50
32054 0.75 2.38 — — 1.00 2.75 — —
44148 2.75 5.50 0.75 7.50 3.25 6.25 1.00 6.50
34698 1.25 3.50 1.00 4.50 1.50 4.25 1.50 4.50
SLIDE HAMMER PULLERS
BLIND HOLE PULLER SET
Removal of bearings, bushings, sleeves and other friction-fitted parts from blind holes can now be accomplished with ease. Set
provides selection of expanding collets 5/16\" to 1-3/4\" I.D. Collet is placed through bore of part to be removed, then expanded
with actuator pin so that lips of collet secure a positive grip for pulling. Pulling force is exerted by means of a forcing screw and
bridge assembly or with a slide hammer. Equipped with a plastic case.
Order No. Description
6981 Blind-hole puller set with slide hammer, forcing screw, bridge, actuator pins, collets, and storage box. Wt., 14.70 lbs.
blind hole puller
example
Order No. Description
2009585 Pin 0.140\"
2009587 Pin 0.200\"
2009589 Pin 0.280\"
2009591 Pin 0.400\"
2009593 Pin 0.500\"
Order No. Description Reach
2009586 Collet 0.300\" - 0.350\" 1.50\"
2009588 Collet 0.350\" - 0.438\" 1.50\"
2009590 Collet 0.438\" - 0.563\" 1.75\"
2009592 Collet 0.563\" - 0.865\" 2.50\"
2009594 Collet 0.865\" - 1.250\" 3.00\"
Order No. Description
24835 Forcing Screw
24836 Forcing Screw Nut
22185 Hammer 2.5 lb.
2009583 Pin Adapter and Thumb Screw
Order No. Description
2009584 Slide Hammer Rod
41331 Bridge
— Plastic Case - 20\" × 15\" × 5.5\"
CONTENTS OF 6981 SET
Order No. Description
SS2 Slide hammer puller set includes both 1172
and 1174. Wt., 5.80 lbs.
Order No. Inch Range
Min. Max.
(in.) (in.)
1172 0.50 2.00
1174 0.50 1.38
SLIDE HAMMER PULLER SET
This very handy set is ideal for close-quarters, inside pulling jobs. The slide hammer puller set is very practical for pulling motor,
generator, and magneto bearings. It’s good for removing small-bore bushings, bearings, and oil seals. 1172
1174
SH
SERIES
powerteam.com 248 PullersSLIDE HAMMER PULLERS
BEARING CUP REMOVER
The 7136 is perfect for pulling internal bearing cups, seals, bushings, etc. With a jaw spread of 0.94” to 3.25”, and reach to
3.50”. Use with any slide hammer having 5/8”-18 thread (1155, 1156 or 927 Bi-Directional™).
Order No. Description
7136 Universal bearing cup remover. Wt., 1.50 lbs.
PILOT BEARING PULLERS
These very versatile pullers are built especially for inside pulling jobs, and particularly for removing flywheel pilot bearings on
machines and construction vehicles. Also very practical for pulling motor, generator and magneto bearings.
Special slide hammer puller – Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil
seals, etc. Internal pulling attachment has jaw spread of 0.5\" to 1.38\". The handle end has a 1/2”– 20 thread.
Order No. Description
1173 Slide hammer puller. Wt., 3.50 lbs.
1174 Puller head, less slide hammer. Wt., 0.80 lb.
1170
Order No. Reach I.D. Spread Weight
Min. Max.
(in.) (in.) (in.) (lbs.)
1170 0.75 0.50 1.50 4.90
1171 1.00 0.88 2.13 4.90
1172 1.75 0.50 2.00 4.90
BASIC SLIDE HAMMER UNITS
Compatible with internal pulling attachment and compatible with threaded adapters. 24\" in length, 5/8\"–18 threaded end.
Order No. Description
1155 Basic slide hammer unit with 5.0 lb. hammer. Wt., 7.30 lbs.
1156 Basic slide hammer unit with 2.5 lb. hammer. Wt., 4.80 lbs.
1155
1156
SLIDE HAMMER PULLERS WITH CUP PULLING ATTACHMENTS
These combine a basic slide hammer with 1152 internal pulling attachment for removing oil seals, outer races, and bearing cups
from blind holes.
Order No. Description Reach Spread Length Prod.
Min. Max. Wt.
(in.) (in.) (in.) (in.) (lbs.)
1157 Slide hammer puller consisting of 1156 slide
hammer and 1152 internal pulling attachment. 4.00 1.50 6.00 28.00 9.80
1158 Slide hammer puller consisting of 1155 slide
hammer and 1152 internal pulling attachment. 4.00 1.50 6.00 28.00 12.30
1158
REVERSIBLE-JAW SLIDE HAMMER PULLERS
Ideal for pulling gears, bearings, outer races, grease retainers, oil seals, etc. Two or three jaws may be used and positioned for
“inside” or “outside” pulling jobs. Both have 5/8”– 18 threaded end so attachments and adapters may be used.
Order No. Description
1176 Slide hammer puller with 2.5 lbs. hammer, 27241 two-way head and 34698 jaws.
1176 1177 Slide hammer puller with 5.0 lbs. hammer, 27241 two-way head and 34698 jaws.
1177
Jaw
Order No.
2-Jaw Spread 3-Jaw Spread Length Prod.
Wt. Inside Outside Inside Outside
Min. Max. Min. Max. Min. Max. Min. Max.
(in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (lbs.)
1176 1.25 3.50 1.00 4.50 1.50 4.50 1.50 4.50 27.00 8.00
1177 1.25 3.50 1.00 4.50 1.50 4.50 1.50 4.50 27.00 10.50
2-Jaw
Spread
3-Jaw
Spread
Jaws
Reversed
SH
SERIES
249 powerteam.com
Pullers
Features
PH
SERIES
■ Power Team pullers are tested for top performance and
reliability at maximum capacity and jaw spread.
■ Easily metered release valve control knob.
■ Spring loaded live centering cone.
■ Bladder type oil reservoir.
■ Rapid adjustment.
■ Use with 2 or 3-jaws.
■ Supplied with a sturdy storage/carrying case.
■ Features Power Team’s exclusive PowerThon™
Limited Lifetime Warranty.
SELF CONTAINED PULLER SYSTEMS ENABLES
FAST AND QUICK SETUP
HYDRA LOCK-JAW™: USE WITH 2 & 3-JAW PULLERS
6, 8, 11 & 30 TON
Model Shown:
PH303C,
PH63C,
HST11S,
PH82K
These pullers are ideal for pulling a wide variety of pressfitted parts including bushings, bearings, wheels, gears and
pulleys. Hydra Lock-Jaw™ pullers have been rigorously
tested for top performance and reliability. PH82K is a
complete pulling system which includes a hydraulic power
module, 2-way puller head, jaws, legs and bearing splitter
attachment, all contained in a convenient carrying case.
HYDRA LOCK-JAW™ PULLING SYSTEM
F
D Stroke Reach
Spread
A
C
B
E
PH82K
HST11S
PH303C
PH63C
Order
No.
Cyl.
Cap.
Reach
Studs
Min.
Jaws
Max.
Reach
Spread
Studs
Jaws Stroke A B C D E F Weight
(ton) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (lbs.)
PH63C 6 — 6.00 — — 7.88 3.13 0.44 0.25 0.88 3.25 0.88 — 10.80
PH83C 8 — 7.50 — — 9.81 3.13 0.44 0.38 1.00 3.25 1.13 — 14.50
PH113C 15 — 9.00 — — 11.00 3.13 0.56 0.38 1.13 3.25 1.13 — 17.60
PH303C 30 10.50 14.75 — — 21.25 3.13 1.06 1.44 0.50 6.69 2.13 5/8-18 UNF 112.00
PH82K 8 10.50 8.16 4.91 11.80 9.91 3.13 0.36 1.00 0.63 3.25 0.88 5/8-18 UNF 35.00
HST11S* 11 — 5.91 — — 16.13 3.13 — — — 3.25 0.88 — 32.00
* Max bar size 2.3622”
Ordering Information
powerteam.com 250 PullersA
ACC.
PULLER
ACCESSORIES
LOCK-JAW™ PULLER ACCESSORY KITS FOR THE HYDRA LOCK-JAW™ PULLER NO. PH83C
Order No. Description
K82 Accessory kit for the Hydra Lock-Jaw™ puller PH83C. Includes 2-way
puller head, 2-jaws, 2 threaded legs and sturdy carrying/storage case.
Wt. 13.70 lbs.
LOCK-JAW™ PULLER ACCESSORY KITS FOR THE PH83C LOCK-JAW™ HYDRAULIC PULLER
Order No. Description
K83 Accessory kit for PH83C Hydra Lock-Jaw™ hydraulic puller. Includes
2/3-way puller head, 3-jaws, 3 threaded legs (5/8-18 thread) and sturdy
carrying/storage case. Also can be used with 1123, 1124, 1130 pulling
attachments. Wt. 23.00 lbs.
PULLER ACCESSORY CONVERTS PH113C INTO A HYDRAULIC STRAIGHTENING TOOL
Good for straightening mechanical shafts, round bars, etc. Simply remove
pump and cylinder from puller head and insert them into the straightening tool
accessory. This product is widely used in steel mills, wire roll companies, wire
extruding companies, textile industry, and any straightening situation where
portability and power are required. Contoured heat-treated shaft adapter
included.
Order No. Description
HST11 Spread: 3.50\" to 16.13\", Reach: 5.91\". Wt., 21.00 lbs.
Shaft adapter
included
LONG JAW SET FOR PH83C AND PH113C LOCK-JAW™ PULLERS
This long jaw set is the perfect addition to the PH83C or PH113C Lock-Jaw™
hydraulic pullers. The extra long jaws give you the added capability of pulling a
wider variety of parts. Jaw capacity is 8 tons when used with the PH83C puller;
15 tons when used with the PH113C puller.
Order No. Description
1188 Spread: 11.00\" to 12.50\", Reach: 12.50\". Wt. 11.50 lbs.
251 powerteam.com
Pullers
Features
HYDRAULIC PULLERS
5, 10, 17.5, 30 & 50 TON
Spread Reach
Reach
Model Shown:
PH53CR,
PH172,
PH303
Order
No.
Cap. Jaws Jaw
Reach
Jaw
Spread
Jaw
Thickness
Jaw
Width
Weight
(ton) (in.) (in.) (in.) (in.) (lbs.)
1057 5 2/3 8.75 11.50 0.34 0.98 7.80
1060 10 2/3 15.00 17.00 0.56 0.98 17.00
1064 17.5 2 11.50 16.00 0.81 1.28 22.00
1066 17.5 3 11.50 20.00 0.81 1.28 36.00
1074 30 3 19.44 34.00 1.13 1.63 90.00
1080 50 3 27.88 44.00 1.41 1.88 191.00
Order No. Description
PH53C Combination 2-jaw/3-jaw puller set. Includes 1057 5 ton puller, RPS55 hydraulic set (C55C cylinder, P12 hand
pump, fittings, coupler, and 6 ft. hose), and 309874 pushing adapter. Wt., 20.00 lbs.
PH53CR Combination 2-jaw/3-jaw puller set. Includes 1057 5 ton puller, C55C cylinder, and 309874 pushing adapter.
Wt., 12.00 lbs.
1057 5 ton cap. 2-jaw/3-jaw puller only. Wt., 7.80 lbs.
5 TON CAPACITY, 2/3-JAW PULLER
Order No. Description
309874 0.63\" diameter pushing adapter. (Included with PH53C and PH53CR hydraulic puller sets). Wt., 0.30 lb.
309875 0.88\" diameter pushing adapter. Wt., 0.80 lb.
47997 2-way/3-way puller head. (Can be used to convert 1038 7 ton manual puller into a 5 ton hydraulic puller).
Wt., 2.30 lbs.
AVAILABLE COMPONENTS
CAUTION: Always use a 3-jaw puller where clearance permits in
order to provide a more stable setup and a more even pulling force.
Ordering Information - Puller Only
HP
SERIES
■ Broad capacity range of 5, 10, 17.5, 30 and 50 tons.
■ 5 and 10 ton sets include: single-acting, spring return
hydraulic cylinder, hose, coupler dust cap, single-speed
hydraulic hand pump, and puller.
■ 17.5, 30 and 50 tons sets include: Power-Twin® singleacting, spring return hydraulic cylinder, hose, coupler
dust cap, single-speed hydraulic hand pump puller,
adjusting screw and crank.
■ Hydraulic cylinder of all models is readily removable
from puller for use with pump in other hydraulic
applications. You get maximum maintenance versatility
for your investment.
■ Fed. Spec.: GGG-P-00781-D
REMOVE GEARS, BEARINGS, AND OTHER
PRESS-FITTED PARTS WITH SPEED AND EASE.
