powerteam.com 52

Features

Pumps■ Four styles of cylinders to choose from.

■ Sets feature single or two-speed hydraulic hand pumps.

■ Cylinders of various tonnages with long, medium or

short stroke.

■ Includes necessary fittings, couplers and 6 foot hose.

PRECISION-MATCHED CYLINDER AND PUMP SET

FOR WIDE RANGE OF APPLICATIONS.

Model Shown:

RPS1006, RPS203H

Ordering Information

Style of

Cylinder

Cyl. Cap. Stroke Order

No.

Retracted

Height

Handle Strokes

Required to

Fully Extend

Cylinders

Cylinder

No.

Pump

No.

Hose

No.

Coupler

No.

Pump

Speed

Prod.

Wt.

(tons.) (in.) (in.) (lbs.)

“C\" Series

5 5.25 RPS55 8.50 75 C55C P12 9756 9798 Single 12.00

10 2.13 RPS102** 4.75 32 C102C P55 9756 9798 Single 26.00

10 6.13 RPS106** 9.75 93 C106C P55 9756 9798 Single 32.10

10 10.13 RPS1010** 13.75 154 C1010C P55 9756 9798 Single 35.60

15 4.13 RPS154** 7.88 81 C154C P55 9756 9798 Single 29.00

15 6.13 RPS156** 10.69 118 C156C P55 9756 9798 Single 34.00

25 6.25 RPS256** 10.75 219 C256C P55 9756 9798 Single 42.70

25 14.25 RPS2514** 18.75 285* C2514C P159 9756 9798 Two 62.70

55 6.25 RPS556** 11.13 268* C556C P159 9756 9798 Two 82.70

100 6.63 RPS1006 13.25 428* C1006C P460 9756 9798 Two 128.70

\"Shorty\"

30 2.44 RPS302** 4.63 61* RSS302 P59 9756 9798 Two 40.00

50 2.38 RPS552** 5.00 89* RSS502 P59 9756 9798 Two 50.00

100 2.25 RPS1002** 5.50 172* RSS1002 P59 9756 9798 Two 81.00

\"Center-Hole\" 20 3.00 RPS203H** 6.06 80 RH203 P55 9756 9798 Single 40.50

Alum. 55 6.13 RPS556A** 10.75 262* RA556 P159 9756 9798 Two 47.00

* Based on 50% of the stroke being made at low-pressure and

50% of the strokes at high pressure.

** Add suffix “B” (example: RPS102B, RPS203HB, etc.) to order

set with optional storage box shown above.

CYLINDER AND PUMP SET

SINGLE OR TWO-SPEED HYDRAULIC HAND PUMPS RPS

SERIES

Mechanical Puller

Selection

OPTIONAL: STORAGE BOX Optional Cylinders

Order

No.

Dimensions Wt.

(lbs.)

350722 35\" L x 14\" H x 13.5\" W 23.00

Storage box for hydraulic cylinder and

pump sets. Rugged industrial strength

material, strong as steel, never needs

painting, won’t rust, dent or chip.

Weatherproof lid is self sealing and

lockable. Molded-in handles, water-tight,

one piece bottom and side construction.

Strong enough to stand on. Note: Actual

product may differ from photo.

53 powerteam.com

Features

Pumps

■ The power unit of choice for major manufacturers

of auto body, frame straighteners and other shop

equipment.

■ Operate at 40-100 psi shop air pressure at the pump.

■ Quiet operation that is suitable for indoor applications,

85 dBA at 10,000 psi.

■ Serviceable pump motor is not a “throw away” providing

economical repair.

■ Permanently vented reservoir cap.

■ Internal relief valve protects circuit components, air inlet

filter protects motor.

COMPACT, LIGHTWEIGHT AND PORTABLE.

SINGLE-SPEED PUMPS DESIGNED TO DRIVE

SINGLE-ACTING CYLINDERS.

SINGLE-SPEED, SINGLE-ACTING, AIR PUMP PA6 6 CU. IN. / MIN., SERIES

PA6 Pressure vs Volume Based on 100 psi air pressure

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

Mechanical Puller

Selection Typical Set-Up Optional Cylinders

Hook-up for

single-acting cylinders

PUMP

AIR

OIL

Performance Specifications

PA6 is the perfect choice for driving this nut splitter in

this heavy truck shop.

Model Shown:

PA6, PA6M-1, PA6-2

powerteam.com 54 PumpsSINGLE-SPEED, SINGLE-ACTING, AIR PUMP

6 CU. IN. / MIN. PA6

SERIES

Two Point Lifting System Example

Ordering Information

Description Order

No.

Air Supply

Req’d

Reservoir Oil

Port

Prod.

Wt. Oil

Cap.

Usable

Oil Cap.

(psi) (cu. in.) (cu. in.) (in.) (lbs.)

Base model pump with high density polyethylene reservoir. PA6 40-120 105 98 3/8 NPTF 14.00

PA6 pump with externally adjustable relief valve and polyethylene reservoir PA6A 40-120 105 98 3/8 NPTF 15.00

PA6 pump with externally adjustable relief valve and metal reservoir. PA6AM 40-120 105 98 3/8 NPTF 17.00

PA6 pump with metal reservoir. PA6M 40-120 105 98 3/8 NPTF 18.00

PA6 pump with 12 foot remote control and polyethylene reservoir PA6R 40-120 105 98 3/8 NPTF 20.58

PA6 pump with 12 foot remote control and metal reservoir. PA6RM 40-120 105 98 3/8 NPTF 21.58

PA6 pump with 1 gallon metal reservoir. PA6M-1 40-120 1 gal. 185 3/8 NPTF 23.70

PA6 pump with 2 gallon high density polyethylene reservoir. PA6-2 40-120 2 gal. 454 3/8 NPTF 24.50

PA6 pump with 2.5 gallon metal reservoir. PA6M-2 40-120 2.5 gal. 570 3/8 NPTF 32.10

Technical Dimensions

Order

No.

A B C D E G

(in.) (in.) (in.) (in.) (in.) (in.)

PA6 7.75 5.88 4.38 9.50 5.00 4 x 9.00

PA6A 7.75 5.88 4.38 9.50 5.00 4 x 9.00

PA6AM 7.75 5.88 4.38 9.50 5.00 4 x 9.00

PA6M 7.75 5.88 4.38 9.50 5.00 4 x 9.00

PA6R 7.75 5.88 4.38 9.50 5.00 4 x 9.00

PA6RM 7.75 5.88 4.38 9.50 5.00 4 x 9.00

PA6M-1 7.88 6.00 4.38 12.63 7.38 —

PA6-2 10.25 8.00 7.00 11.50 9.50 5 1/8 x 7.13

PA6M-2 10.00 7.75 6.75 11.50 9.50 8 x 10.00

55 powerteam.com

Features

Pumps

PA6D pump, 9052 analog and 25 ton cylinder used

in a test fixture.

■ Operate at 40-100 psi shop air pressure at the pump.

■ Internal relief valve protects circuit components while

the air inlet filter protects motor.

■ Serviceable pump allows for economical repairs.

■ Permanently vented reservoir cap.

■ 85 dBA at 10,000 psi for all PA6 pumps.

COMPACT, LIGHTWEIGHT AND PORTABLE

SINGLE-SPEED PUMP FOR DRIVING

DOUBLE-ACTING CYLINDERS.

Model Shown:

PA6D

SINGLE-SPEED, DOUBLE-ACTING, AIR PUMP PA6D 6 CU. IN. / MIN. SERIES

PA6D Pressure vs Volume Based on 100 psi air pressure

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

Mechanical Puller

Selection Typical Set-Up Optional Cylinders

Hook-up for

double-acting cylinders

PUMP

AIR OIL

Performance Specifications

powerteam.com 56 PumpsTechnical Specifications

Description Order

No.

Valve

No.

Air

Supply

Req’d

Reservoir Oil

Port

Prod.

Wt. Oil

Cap.

Usable

Oil Cap.

(psi) (cu. in.) (cu. in.) (in.) (lbs.)

Base model pump with high density polyethylene

reservoir. PA6D 9504

3-way/4-way 40-120 105 98 3/8 NPTF 18.40

PA6D pump with metal reservoir. PA6DM 9504

3-way/4-way 40-120 105 98 3/8 NPTF 20.40

PA6D pump with 1 gallon metal reservoir. PA6DM-1 9504

3-way/4-way 40-120 1 gal. 185 3/8 NPTF 28.10

PA6D pump with 2 gallon high density polyethylene

reservoir. PA6D2 9504

3-way/4-way 40-120 2 gal. 454 3/8 NPTF 28.60

PA6D pump with 2.5 gallon metal reservoir. PA6DM-2 9504

3-way/4-way 40-120 2.5 gal. 570 3/8 NPTF 36.20

Technical Dimensions

Order

No.

A B C D E G

(in.) (in.) (in.) (in.) (in.) (in.)

PA6D 10.38 5.88 4.38 9.50 5.00 4 x 9.00

PA6DM 10.38 5.88 4.38 9.50 5.00 4 x 9.00

PA6DM-1 11.00 5.75 4.38 12.63 7.38 n/a

PA6D2 12.75 8.00 7.00 11.31 9.25 5 1/8 x 7.13

PA6DM-2 12.50 7.75 6.75 11.50 9.50 8 x 10.00

SINGLE-SPEED, DOUBLE-ACTING, AIR PUMP

6 CU. IN. / MIN. PA6D

SERIES

A

C

G

D

B E G

Model Shown:

PA6D2, PA6DM-1

57 powerteam.com

Features

Pumps

PA9H Hand Control Pump used in a

straightening press.

■ Easier to operate than a hand pump, giving you the

speed you need at an affordable price.

■ Serviceable pump allows for economical repairs.

■ Unique bladder design for all-position operation and

storage.

■ Operates on 40-120 psi shop air, at 20 cfm.

■ Hard-coat anodized aluminum housing.

■ Oil filler with integral safety relief minimizes chance of

damage to reservoir bladder if overfilling occurs.

IDEAL FOR POWERING SINGLE-ACTING

CYLINDERS AND PORTABLE HYDRAULIC TOOLS.

Model Shown:

PA9 Foot Control, PA9H Hand Control

SINGLE-ACTING, AIR PUMP PA9 9 CU. IN. / MIN. SERIES

PA9 Pressure vs Volume Based on 100 psi air pressure

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

Mechanical Puller

Selection Typical Set-Up Optional Cylinders

Hook-up for

single-acting cylinders

PUMP

AIR

OIL

Performance Specifications

powerteam.com 58 PumpsPA9 Foot Control

Ordering Information

For Use With

Cyl. Type

Order

No.

Air Supply

Req’d

Reservoir Oil

Port

Max.

Pressure

Output

Prod.

Wt. Oil

Cap.

Usable

Oil Cap.

(psi) (cu. in.) (cu. in.) (in.) (psi) (lbs.)

Single-Acting PA9 40-120 35.00 33.50 3/8 NPTF 10,000 15.00

Single-Acting PA9H 40-120 35.00 33.50 3/8 NPTF 10,000 15.00

Technical Dimensions

Order

No.

A B C D E F G H I J K

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.)

PA9 16.94 12.00 2.81 4.25 5.31 7.00 5.83 7.00 1.13 — —

PA9H 16.94 12.00 2.81 4.25 — 7.00 — 7.00 1.13 4.81 6.69

SINGLE-ACTING, AIR PUMP

9 CU. IN. / MIN. PA9

SERIES

WARNING

A

B C

E

F

D K

I

Turn and hold to release

hydraulic pressure on PA9H

WARNING

H

up position G

J

Relief valve settings: up to 10,000 psi

Mounting holes (standard): 3/

8

” slots

Press and hold to

run motor on PA9H

59 powerteam.com

Features

Pumps

The PA60 used in a work-holding environment

■ Equipped with air pressure regulator, air filter and

lubricator.

■ Serviceable air motor for economical repair.

■ Internal relief valve protects circuit components.

■ Permanently vented reservoir cap.

TWO-SPEED PUMP FOR RAPID OIL DELIVERY AT

LOW PRESSURE QUICKLY ADVANCES CYLINDER

OR TOOL.

Model Shown:

PA64

TWO-SPEED, SINGLE AND DOUBLE-ACTING, AIR PUMP PA60 6 CU. IN. / MIN. SERIES

Typical Set-Up Optional Cylinders

Single-Acting

Cylinder.

9510 sub-plate

with 9502, 9505

or 9576 valve.

OIL

OIL

AIR

PA60 In this typical application an

air/hydraulic pump is used

with a remote valve to drive a

single-acting cylinder.

Performance Specifications

465

400

300

200

100

75

50

25

0

1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

PA6

PA60/PA64

PA9

powerteam.com 60 PumpsTWO-SPEED, SINGLE AND DOUBLE-ACTING, AIR PUMP

6 CU. IN. / MIN. PA60

SERIES

A

C

F

B

D

E

G

PA60 / PA64

Technical Specifications

Description Order

No.

Valve

No.

Valve

Function

Air

Supply

Req’d

Reservoir Oil

Port

Prod.

Wt. Oil

Cap.

Usable

Oil Cap.

(psi) (cu. in.) (cu. in.) (in.) (lbs.)

For use with remote valves. PA60 9626

Manifold — 40-120 2.00 425.00 3/8 NPTF 54.00

For use with single or double-acting cylinders PA64 9507

3/4-Way

Advanced

Hold Return 40-120 2.00 425.00 3/8 NPTF 56.00

* Typical delivery. Actual flow will vary with field conditions.

Technical Dimensions

Model Shown:

PA60

Order

No. A B C D E F G

Max.

Pressure

Output

Oil Del. (cu. in./min. @) *

0 100 1,000 5,000 10,000

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi)

PA60 — 9.44 8.13 14.25 9.63 7.13 5.13 10,000 360 350 50 12 6

PA64 14.25 — 8.13 14.25 9.63 7.13 5.13 10,000 390 350 50 12 6

61 powerteam.com

Features

Pumps

■ Serviceable air motor for economical repair.

■ Air inlet filter protects air motor.

■ Filter in outlet port protects against contaminated

systems.

■ Assorted reservoirs to suit your application’s

requirements.

SINGLE-SPEED, LOW PRESSURE (3,200 PSI)

OUTPUT PUMPS.

Model Shown:

PA50D, PA50M, PA50R2

SINGLE-SPEED, SINGLE AND DOUBLE-ACTING, AIR PUMP PA50 28 CU. IN. / MIN. SERIES

The PA50 used in a work-holding environment

Performance Specifications

465

400

300

200

100

75

50

25

0

1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

PA50

powerteam.com 62 PumpsTWO-SPEED, SINGLE AND DOUBLE-ACTING, AIR PUMP

6 CU. IN. / MIN. PA50

SERIES

Notes: Air inlet port 1/4” NPTF. Requires 20 cfm at 100 psi shop air pressure at the pump to achieve 3,200 psi.

Technical Dimensions

Order

No. A B C D E F G

Max.

Pressure

Output

Oil Del. (cu. in./min. @) *

0 100 1,000 3,200

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi)

PA50, PA50R 7.75 5.88 4.38 9.50 5.00 — 4 x 9.00 3,200 128 110 88 28

PA50R2 10.25 8.00 7.00 11.50 9.50 — 5 1/8 x 7.13 3,200 128 110 88 28

PA50D 10.38 5.88 4.38 9.50 5.00 9.00 4.00 3,200 128 110 88 28

A

C

F

B

D

E

G

* Typical delivery. Actual flow will vary with field conditions.

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

No.

Air

Supply

Req’d

Reservoir Oil

Port

Prod.

Wt. Oil

Cap.

Usable

Oil Cap.

(psi) (cu. in.) (cu. in.) (in.) (lbs.)

Single-Acting Base model pump with high density polyethylene

reservoir. PA50 — 40-120 105 98 3/8 NPTF 14.20

Single-Acting PA50 pump with 12 foot remote control and

polyethylene reservoir. PA50R — 40-120 105 98 3/8 NPTF 18.50

Single-Acting PA50R with 2 gallon polyethylene reservoir. PA50R2 — 40-120 2 gal. 454 3/8 NPTF 28.50

Single and

Double-Acting PA50 pump with valve and polyethylene reservoir. PA50D 9504

3-way / 4-way 40-120 105 98 3/8 NPTF 18.40

Mechanical Puller

Selection Analog Gauges Optional Cylinders

Improve your system visibility and safety by

adding an inline hydraulic gauge to your

circuit.

9440 (2.5 in.), 9052 (4 in.), and 9089 (6 in.)

Mechanical Puller

Selection

Heavy-duty and thermo plastic hydraulic hoses

to meet your requirements and safety factor.

Refer to the accessories section for details.

Hydraulic Hoses Optional Cylinders

63 powerteam.com

Features

Pumps

■ Two-speed operation for high speed cylinder advance.

■ Durable two gallon thermoplastic reservoir. (Metal

reservoir conversion kits are available.)

■ Air motor capable of starting under full load.

ROTARY-STYLE AIR MOTOR. USE WHERE AIR IS

THE PREFERRED SOURCE OF ENERGY.

Model Shown:

PA172, PA174

TWO-SPEED, SINGLE AND DOUBLE-ACTING, AIR PUMP PA17 17 CU. IN. / MIN. SERIES

The PA17 used with a flange spreader

Performance Specifications 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

465

400

300

200

100

50

0

525

390

290

PA554

PA172, PA174

PA464R,

PA464RA

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

powerteam.com 64 PumpsTWO-SPEED, SINGLE AND DOUBLE-ACTING, AIR PUMP

17 CU. IN. / MIN. PA17

SERIES

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

No.

Valve

Function

Air

Supply

Req’d

Reservoir Prod.

Wt. Oil

Cap.

Usable

Oil Cap.

(psi) (cu. in.) (cu. in.) (lbs.)

Single-Acting Base model pump with 2 gallon

thermoplastic reservoir. PA172 9517,

2-way

Advance

Return* 40-120 2 295 40.00

Single and

Double-Acting

PA172 pump with 2 gallon thermoplastic

reservoir, 9500 valve for use with single or

double-acting cylinders

PA174 9500,

4-way

Advance

Hold

Return*

40-120 2 295 41.00

Technical Dimensions

Order

No. A B C D E F H

Max.

Pressure

Output

Oil Del. (cu. in./min. @) *

0 100 1,000 5,000 10,000

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi)

PA172 14.13 11.38 9.25 7.00 7.13 5.13 3/8 NPTF 10,000 290 240 24 23 17

PA174 14.13 11.38 9.25 7.00 7.13 5.13 3/8 NPTF 10,000 290 240 24 23 17

Holds pressure in advance position when valve motor is shut-off or in return position Notes: Requires 40 cfm at 100 psi shop air pressure at the pump. 85/90 dBA at 10,000 psi.

with motor running. Pump will build pressure when motor is shut-off and oil returns

to reservoir.

*

* Typical delivery. Actual flow will vary with field conditions.

D

A

E

B

F

C

H

Mechanical Puller

Selection

For dependable performance

of all your hydraulic pumps and

cylinders. Power Team specialty

blended oils contains foam

suppressant additives and has a

high viscosity index. Refer to the

Accessories section for complete

details

Hydraulic Fluids Optional Cylinders

Mechanical Puller

Selection

Heavy-duty and thermo plastic hydraulic hoses

to meet your requirements and safety factor.

Refer to the accessories section for details.

Hydraulic Hoses Optional Cylinders

Mechanical Puller

Selection

Looking for great safety suggestions? Visit our

Resource Section to get a better understanding

of hydraulic and mechanical safety insights on

what to look for when working around hydraulics

Learn More - About Hydraulic Safety Insight Optional Cylinders

65 powerteam.com

Features

Mechanical Puller

Selection Torque Wrench Pumps Optional Cylinders

For Torque Wrench Pump Configurations,

refer to the Tools Section.

Pumps

■ 3 hp motor starting under full load.

■ Two-speed operation for rapid cylinder advance.

■ Models available with full remote control over

advance and return, (except PA554).

■ Tandem center valve holds the load when pump is

shut-off.

ROTARY-STYLE AIR MOTOR. USE WHERE AIR IS

THE PREFERRED SOURCE OF ENERGY.

Features Model Shown:

PA462, PA464R, PA554

TWO-SPEED, SINGLE AND DOUBLE-ACTING, AIR PUMP

46-55 CU. IN. / MIN.

PA554 pump and RH2008 Center Hole cylinder

used to tension cables.

PA

SERIES

Performance Specifications 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

465

400

300

200

100

50

0

525

390

290

PA554

PA172, PA174

PA464R,

PA464RA

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

powerteam.com 66 PumpsTWO-SPEED, SINGLE AND DOUBLE-ACTING, AIR PUMP

46-55 CU. IN. / MIN.

D

A

E

B

F

C

H

PA

SERIES

Note: Reservoir has four 1/2\" - 20 mounting holes.

Technical Dimensions

Order

No. A B C D E F H

Max.

Pressure

Output

Oil Del. (cu. in./min. @) *

0 100 1,000 5,000 10,000

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi)

PA462 15.00 11.50 9.50 7.00 10.00 8.00 3/8 NPTF 10,000 465 450 53 51 46

PA464 15.00 11.50 9.50 7.00 10.00 8.00 3/8 NPTF 10,000 465 450 53 51 46

PA464R 15.00 11.50 9.50 7.00 10.00 8.00 3/8 NPTF 10,000 465 450 53 51 46

PA464RA 15.00 11.50 9.50 7.00 10.00 8.00 3/8 NPTF 10,000 465 450 53 51 46

PA554 19.00 11.50 9.50 7.00 10.00 8.00 3/8 NPTF 10,000 465 450 80 70 55

* Typical delivery. Actual flow will vary with field conditions.

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Number

Valve

Function

Air

Supply

Req’d

Reservoir Prod.

Wt. Oil

Cap.

Usable

Oil Cap.

(psi) (cu. in.) (cu. in.) (lbs.)

Single-Acting Base model pump with 2.5 gallon steel reservoir. PA462 9584,

2-way

Advance/ Hold/

Return 40-120 2.5 590 60.00

Single and

Double-Acting

PA462 pump with 9500 valve capable of running

2 single-acting cylinders or one double-acting

cylinder.

PA464 9500,

4-way

Advance/

Hold/

Return*

40-120 2.5 590 61.00

Single and

Double-Acting

PA462 pump with air actuated valve for full

remote control over advance and return. Includes

12 ft. remote control.

PA464R† 9594,

4-way

Advance/

Hold/

Return

40-120 2.5 590 78.00

Single and

Double-Acting

PA464R pump with automatic dump feature.

Includes 25 ft. remote control. PA464RA**† 9594,

4-way

Advance/ Hold/

Return* 40-120 2.5 590 79.00

Single and

Double-Acting

High-performance pump with 2.5 gallon steel

reservoir. PA554 9500,

4-way

Advance/ Hold/

Return* 40-120 2.5 525 72.00

Notes: Requires 50 cfm at 80 psi shop air pressure at the pump.

85/90 dBA at 10,000 psi.

The PA464RA has an “automatic dump” feature. Pressure is not held when operator

releases “advance” or “return” button. PA464R will “hold” only in the “advance”

position with the motor shut-off.

†

* Holds when motor is shut-off and valve is in “advance” position. ** Not to be used for lifting.

Mechanical Puller

Selection Analog Gauges Optional Cylinders

Improve your system visibility and safety by

adding an inline hydraulic gauge to your

circuit.

9440 (2.5 in.), 9052 (4 in.), and 9089 (6 in.)

67 powerteam.com

INFO SECTION

WORKSHEET

powerteam.com 68

INFO SECTION

WORKSHEET

69 powerteam.com

INFO SECTION

WORKSHEET

powerteam.com 70

INFO SECTION

WORKSHEET

71 powerteam.com

Features

Pumps

■ Compact, Li-ion 18VDC, 8.0 Ah battery-powered pump

provides extended run-time.

■ Two-stage, high-pressure hydraulic pump offers quick tool

advancement in the first stage.

■ Extremely compact, lightweight with an ergonomic handle grip

and transport strap to ease portability.

■ Self-contained, rubber bladder reservoir allows pump usage

in most positions with an impressive capacity of 52 cu. in.

usable.

■ Quiet, smooth-running, serviceable brushed 18VDC motor.

■ High-impact, fiberglass reinforced shroud protects your

investment in the most demanding and harsh applications.

■ Interchangeable valve configuration accommodates a vast

array of applications.

■ CSA rated for intermittent duty, CE compliant.

COMPACT, PORTABLE, CORDLESS HYDRAULIC

PUMP FOR MRO APPLICATIONS.

Order

No.

Description Refer

to

Note

Tool

Type

Valve

Type

Valve

Function

Remote Control PB102-0 18VDC Power Pump SA 2-Way Auto-Dump NO Charger (1) SA 2-Way Hold/Auto Dump (9561) Advance/Return Optional

PB102P-0 18VDC Power Pump SA 2-Way Auto-Dump

w/Pendent NO Charger (1) SA 2-Way Hold/Auto Dump (9561) Advance/Return Included Pendant

with 10 ft. cord PB102R-0 18VDC Power Pump SA 2-Way Auto-Dump Pressure

Reg. NO Charger (1), (3) SA 2-Way Hold/Auto Dump w/

Pressure Regulator (9561, 9560)

Advance/Return Pressure

Adjustment 1-10K Optional PB102A-0 18VDC Power Pump SA Auto-Dump NO Charger (2) SA 2-Way Auto Dump (9562) Advance/Return (Auto) Optional PB104-0 18VDC Power Pump DA 4-Way NO Charger (4) DA 4-Way (9563) Advance/Hold/Return Optional PB102-CP 18VDC Power Pump SA 2-Way Auto-Dump w/Popper (2), (5) SA 2-Way Dump w/ Pop Off RV (3001123) Advance/Auto Return Optional PB102-1 18VDC Power Pump SA 2-Way Auto-Dump US Charger (1) SA 2-Way Hold/Auto Dump (9561) Advance/Return Optional

PB102P-1 18VDC Power Pump SA 2-Way Auto-Dump

w/Pendent US Charger (1) SA 2-Way Hold/Auto Dump (9561) Advance/Return Included, Pendant

with 10 ft. cord PB102R-1 18VDC Power Pump SA 2-Way Auto-Dump

Pressure Reg. US Charger (1), (3) SA 2-Way Hold/Auto Dump w/Pressure

Regulator (9561, 9560)

Advance/Return

Pressure Adjustment 1-10K Optional PB102A-1 18VDC Power Pump SA Auto-Dump US Charger (2) SA 2-Way Auto Dump (9562) Advance/Return (Auto) Optional PB104-1 18VDC Power Pump DA 4-Way US Charger (4) DA 4-Way (9563) Advance/Hold/Return Optional PB102-2 18VDC Power Pump SA 2-Way Auto-Dump EU Charger (1) SA 2-Way Hold/Auto Dump (9561) Advance/Return Optional

PB102P-2 18VDC Power Pump SA 2-Way Auto-Dump

w/Pendent EU Charger (1) SA 2-Way Hold/Auto Dump (9561) Advance/Return Included Pendant

with 10 ft. cord PB102R-2 18VDC Power Pump SA 2-Way Auto-Dump

Pressure Reg. EU Charger (1), (3) SA 2-Way Hold/Auto Dump w/Pressure

Regulator (9561, 9560)

Advance/Return

Pressure Adjustment 1-10K Optional PB102A-2 18VDC Power Pump SA Auto-Dump EU Charger (2) SA 2-Way Auto Dump (9562) Advance/Return (Auto) Optional PB104-2 18VDC Power Pump DA 4-Way EU Charger (4) DA 4-Way (9563) Advance/Hold/Return Optional Model Shown:

PB102-1, PB102P-1

PB

SERIES

2-Way Auto Dump Function: Flapper handle in \"hold\" position will allow the tool to advance and

maintain pressure when the motor is shut-off, flapper handle must be switched back to retract

and dump pressure. Flapper handle is set to \"return\" position, power on will advance tool and

power-off will retract tool and dump pressure.

(1)

(2) Auto Dump Function: Power on - tool advances, and power-off - tool returns, releasing pressure to tank.

Using the external knob, the pressure regulator valve allows the operator to externally adjust the

pressure on demand, ranges from 500 - 10,000 psi.

(3)

Four-way valve direction is controlled by the handle lever. Three position; Advance, hold, retract.

For crimping applications only. Once full pressure is reached, RV provides audible noise.

(4)

(5)

SA = Single-Acting DA = Double-Acting

Ordering Information

COMPACT, LI-ION BATTERY-POWERED, HYDRAULIC PUMP

52 CU. IN.

powerteam.com 72 PumpsFlow @ Stages Usable

Oil

Capacity

Battery Included Charger

(w/plug style)

Dimension Prod.

Weight

Order

No.

A B C

Length Width Height

(cu. in.) (cu. in.) (in.) (in.) (in.) (lbs.)

1st Stage:

200 @ 200 psi

2nd Stage:

11 @ 10,000 psi

52 (1) One 18VDC

Li-Ion 8.0 Ah No charger is included

17.23 7.56 8.45 24 PB102-0

17.23 7.56 8.45 26 PB102P-0

17.23 7.56 9.52 25 PB102R-0

17.23 7.56 7.56 24 PB102A-0

17.23 7.56 10.20 25 PB104-0

17.23 7.56 8.45 25 PB102-CP

1st Stage:

200 @ 200 psi

2nd Stage:

11 @ 10,000 psi

52 (1) One 18VDC

Li-Ion 8.0 Ah

(1) One 115VAC

M18 Charger

(US Plug)

17.23 7.56 8.45 24 PB102-1

17.23 7.56 8.45 26 PB102P-1

17.23 7.56 9.52 25 PB102R-1

17.23 7.56 7.56 24 PB102A-1

17.23 7.56 10.20 25 PB104-1

1st Stage:

200 @ 200 psi

2nd Stage:

11 @ 10,000 psi

52 (1) One 18VDC

Li-Ion 8.0 Ah

(1) One 230VAC

M18 Charger

(EU Plug) Europe Only

17.23 7.56 8.45 24 PB102-2

17.23 7.56 8.45 26 PB102P-2

17.23 7.56 9.52 25 PB102R-2

17.23 7.56 7.56 24 PB102A-2

17.23 7.56 10.20 25 PB104-2

Turnkey, 10,000 PSI (690 bar) hydraulic

power pump powered by an 18VDC Li-Ion

battery, ships with hydraulic oil.

Transport shoulder strap with clips

installed on shroud for quick fastening or

removal.

One 18VDC Li-Ion 8.0 Ah Battery,

additional batteries can be purchased

separately.

18VDC battery charger available in

115VAC or 230VAC for certain models,

excludes all -0 models

PB

SERIES

Optional Remotes Optional Cylinders

These remotes are equipped with connectors to

enable the operator to “plug and play” the connection

quickly. The wiring is configured to allow the operator

to use the power switch on the pump or operate

remotely once connected.

Hand Switch

Order # 3000989

Foot Pendant

Order # 3000975

A B

C

Top View Rear Side View

Technical Dimensions

Hardware Included

COMPACT, LI-ION BATTERY-POWERED, HYDRAULIC PUMP

52 CU. IN.

73 powerteam.com

Features

■ Portable power source for hydraulic cylinders and tools.

■ Permanent magnet motor starts easily under load, even

with reduced voltage conditions.

■ Battery-operated models have 8 foot power cord with

alligator clips to connect to any 12VDC battery.

■ Optional rechargeable battery pack with shoulder strap

for maximum portability.

■ Pump typically delivers 15 minutes of continuous

operation at 10,000 psi on a single battery.

■ Pump can be operated in any position.

■ 24VDC hand and foot switches available for all AC

powered models.

■ High-impact housing with flame–retardant construction.

■ Base mounting holes for fixed installations.

■ CSA rated for intermittent duty.

HIGH-PERFORMANCE IN A COMPACT PACKAGE.

ELECTRIC AND BATTERY POWERED MODELS

FOR POWERING TOOLS AND CYLINDERS UP TO

25 TON.

Model Shown:

PE104, PR104

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC/BATTERY PE10 PUMP, QUARTER HORSE®, 60 CU. IN. / MIN. SERIES

Technical Dimensions

Order

No.

Max.

Pressure

Output

dBA at

Idle and 10,000

Oil Del. (cu. in./min. @) Overall Dimensions Prod.

Wt.

0-40 10,000 with Oil Length Width Height

(psi) (psi) (psi) (psi) (in.) (in.) (in.) (lbs.)

PE10 Series

10,000 68-74 * 120 10 13.00 7.75 8.00 20.00 PR10 Series

* Measured at 3 ft. distance, all sides.

Pumps

L

H

W

Performance Specifications 100 500 1000 2000 3000 4000 5000 7000 10,000

150

100

50

0

250

200 PE10, PR10

Series

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

powerteam.com 74

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC/BATTERY

PUMP, QUARTER HORSE® , 60 CU. IN. / MIN. PE10

SERIES

Ordering Information

Order

No.

For Use With

Cylinder Type

Description Valve

Type

Valve

No.

Valve

Function

Control

Switch

Motor Reservoir

Usable

Oil Cap.

(cu. in.)

PE102 Single-Acting 1/4 hp motor. Bladder type reservoir,

110VAC power required.

2-Way/

Auto

Dump

9561

Advance

Return

(Auto.)*

Rocker Type off,

Momentary on

1/4 hp, 110/115VAC

50/60 Hz, Single-Phase 60

PE102A Single-Acting

1/4 hp motor. Bladder type reservoir,

110VAC power required, automatic

dump valve.

Auto. Dump 9562 Advance

Return**

Rocker Type off,

Momentary on

1/4 hp, 110/115VAC

50/60 Hz, Single-Phase 60

PE102-220 Single-Acting 1/4 hp motor. Bladder type reservoir,

220VAC power required.

2-Way/

Auto.

Dump

9561

Advance

Return

(Auto.)*

Rocker Type off,

Momentary on

1/4 hp, 110/115VAC

50/60 Hz, Single-Phase 60

PE102A-220 Single-Acting

1/4 hp motor. Bladder type reservoir,

220VAC power required, automatic

dump valve.

Auto. Dump 9562 Advance

Return**

Rocker Type off,

Momentary on

1/4 hp, 220/230VAC

50/60 Hz, Single-Phase 60

PR102 Single-Acting 1/4 hp motor. Bladder type reservoir,

12VDC power required.

2-Way/

Auto.

Dump

9561

Advance

Return

(Auto.)*

Rocker Type off,

Momentary on 1/4 hp, 12VDC† 60

PR102A Single-Acting

1/4 hp motor. Bladder type reservoir,

12VDC power required, automatic

dump valve.

Auto. Dump 9562 Advance

Return**

Rocker Type off,

Momentary on 1/4 hp, 12VDC† 60

PE104 Single-Acting,

Double-Acting

Base model pump has 4-way valve for

operating double-acting systems.

110VAC power required.

4-Way 9563

Advance

Hold

Return

Rocker Type off,

Momentary on

1/4 hp, 110/115VAC

50/60 Hz, Single-Phase 60

PE104-220 Single-Acting,

Double-Acting

PE104 pump has 4-way valve for

operating double-acting systems.

220VAC power required.

4-Way 9563

Advance

Hold

Return

Rocker Type off,

Momentary on

1/4 hp, 220/230VAC

50/60 Hz, Single-Phase 60

PR104 Single-Acting,

Double-Acting

PE104 pump has 4-way valve for

operating double-acting systems.

12VDC power required.

4-Way 9563

Advance

Hold

Return

Rocker Type off,

Momentary on 1/4 hp, 12VDC† 60

** Cylinder advances with motor running and automatically returns with motor shut-off.

† Comes with an 8 ft. alligator clip cord for 12VDC use.

Advance position holds pressure with motor shut-off. Return position advances cylinder with motor running and returns cylinder with motor shut-off. *

NOTE: Amp draw at 10,000 psi – 6 amp at 115VAC, 3 amp at 230VAC, and 35 amp

at 12VDC.

Accessories

9560 – Pressure regulator. Adjustable

from 1,000 to 10,000 psi. All

mounting hardware included.

Wt., 3.0 lbs.

251660 – Foot switch with 10 ft. cord.

Single pole, double throw, 15 amp @

125-250VAC. Wt., 1.0 lb.

BP212VQ – Optional 12VDC battery

pack. Includes sealed lead acid battery,

115VAC charger, 4 ft. cord, carrying

case and shoulder strap. Wt., 17.7 lbs.

BP12INT – Battery with cord and

carrying case. Wt., 11.1 lbs.

RC12V – Replacement 4 ft. battery cord

only. Wt., 0.5 lbs. The Quarter Horse pump has a maximum operating pressure of

10,000 psi, which handles a wide variety of hand-held hydraulic

tools.

NOTE: PR10 rechargeable model is equipped with 8 ft. cord with alligator clips. Order optional

battery pack (No. BP212VQ) or use with any 12VDC battery.

Pumps

75 powerteam.com

Features

■ For use with single or double-acting cylinders at

operating pressure up to 10,000 psi.

■ Equipped with 1/2 hp, 3,450 rpm, single-phase, thermal

protected induction motor; 10 ft. remote control cord

(PE172S has 25 ft. cord)

■ Low amperage draw; small generators and low

amperage circuits can be use as power source.

■ Extremely quiet noise level (67-81 dBA).

■ Starts under full load for intermittent duty.

FOR MAINTENANCE AND CONSTRUCTION

APPLICATIONS.

Model Shown:

PE172

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP, PE17 17 CU. IN. / MIN. SERIES

Pumps

Performance Specifications

Mechanical Puller

Selection

Heavy-duty and thermo plastic hydraulic hoses

to meet your requirements and safety factor.

Refer to the accessories section for details.

Hydraulic Hoses Optional Cylinders 10

0

50

0 1000 2000 3000 4000 5000 7000 10,000

400

300

200

100

0

500

PE84

PE17 Series

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

powerteam.com 76

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

17 CU. IN. / MIN. PE17

SERIES

Technical Dimensions

* PE84 is the same as the PE174, except has continuous duty with 2 gallon thermoplastic reservoir and features 1,750 RPM

Order

No. A B C D E F G

Max.

Pressure

Output

rpm dBA at

Idle and

10,000

Amp Draw

115 V - at

10,000

Oil Del. (cu. in./min. @) Prod.

Wt.

0 100 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PE17 Series 18.50 7.00 11.38 7.13 14.88 9.25 5.13 10,000 3,450 67/81* 10 290 190 20 16 45.00

PE17M Series 18.13 6.63 11.50 — 14.50 9.50 — 10,000 3,450 67/81* 10 290 190 20 16 53.00

PE84 Series 18.50 7.00 11.38 7.13 15.38 9.25 5.13 10,000 1,750 67/81* 10 145 120 12 8 47.00

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

No.

Valve

Function

Control

Switch ††

Motor Reservoir

Usable

Oil Cap.

(cu. in.)

Single-Acting 1/2 hp pump with 2 gallon thermoplastic

reservoir. PE172 ††† 2-Way 9517

Advance

Return

(Auto†)

Remote Motor Control

(10 ft.) on/off

1/2 hp, 110/115VAC*

50/60 Hz, Single-Phase 295

Single-Acting 1/2 hp pump with 2.5 gallon aluminum

reservoir. PE172M ††† 2-Way 9517

Advance

Return

(Auto†)

Remote Motor Control

(10 ft.) on/off

1/2 hp, 110/115VAC*

50/60 Hz, Single-Phase 375

Single-Acting 1/2 hp pump with 2 gallon thermoplastic

reservoir, solenoid-operated valve. PE172S 3-Way 9579

Advance

Hold

Return

Remote Motor &

Valve (25 ft.)

1/2 hp, 110/115VAC

50/60 Hz, Single-Phase 295

Single-Acting 1/2 hp pump with 2 gallon aluminum

reservoir, solenoid-operated valve. PE172SM 3-Way 9579

Advance

Hold

Return

Remote Motor &

Valve (25 ft.)

1/2 hp, 110/115VAC

50/60 Hz, Single-Phase 375

Single-Acting

Best suited for crimping, punching,

pressing. Not for lifting.

Thermoplastic reservoir.

PE172A †††∞ Auto./Dump

Manifold 45554 Advance

Return

Remote Motor Control

(10 ft.) on/off

1/2 hp, 110/115VAC

50/60 Hz, Single-Phase 295

Single-Acting

Best suited for crimping, punching,

pressing. Not for lifting.

Aluminum reservoir.

PE172AM †††∞ Auto./Dump

Manifold 45554 Advance

Return

Remote Motor Control

(10 ft.) on/off

1/2 hp, 110/115VAC*

50/60 Hz, Single-Phase 375

Single-Acting,

Double-Acting

1/2 hp pump with 2 gallon thermoplastic

reservoir, 9500 double-acting valve. PE174 ††† 4-Way 9500

Advance

Hold

Return**

Remote Motor Control

(10 ft.) on/off

1/2 hp, 110/115VAC*

50/60 Hz, Single-Phase 295

Single-Acting,

Double-Acting

1/2 hp pump with 2 gallon aluminum

reservoir, 9500 double-acting valve. PE174M ††† 4-Way 9500

Advance

Hold

Return**

Remote Motor Control

(10 ft.) on/off

1/2 hp, 110/115VAC*

50/60 Hz, Single-Phase 375

Single- or Multi

Double-Acting

1/2 hp pump, continuous duty with 2 gallon

thermoplastic reservoir, 9500 double-acting

valve.

PE84 4-Way 9500

Advance

Hold

Return**

Remote Motor Control

(10 ft.) on/off

1/2 hp, 115VAC*

60 Hz, Single-Phase 295

The remote motor control switch on 220VAC 50Hz cycle PE17 series pumps is

24VDC.

†† Usable oil is calculated with the oil fill at the recommended level of 1.50\" below

reservoir cover plate.

NOTE:

NOTE: Contact Factory for special 12VDC version for service vehicles

Some Power Team pumps are available in special configurations not listed in

this catalog. For your special requirements please consult your local distributor

or the Power Team factory.

Available with 220VAC 50Hz motor (to order, place suffix “50-220” behind ‡

pump order number).

*

** Advance position holds pressure with motor shut-off.

Advance position holds pressure with motor shut-off. Return position

advances cylinder with motor running and returns cylinder with motor shut-off.

† ∞ Not to be used for lifting.

††† CSA Compliant

Pumps

77 powerteam.com

Features

■ Vanguard Jr.® pumps provide two-speed highperformance in a light-weight, compact package.

■ Gauge port provided on pump. Metal reservoir on all

models.

■ Equipped with a 1⁄2 hp, 115VAC, 60/50 Hz

single-phase motor that starts under load, even at

reduced voltage.

■ Low amperage draw permits use with smaller

generators and low amperage circuits.

■ All pumps have a 10 foot remote control (PE183C has

25 foot remote control).

■ Noise level of 85-90 dBA.

■ CSA rated for intermittent duty.

IDEAL FOR USE WITH SMALL HYDRAULIC POWER

TOOLS.

Model Shown:

PE182, PE183-2, PE183C

PE18

SERIES

100

500 1000 2000 3000 4000 5000 6000 7000 10,000

290

150

100

50

0

350

250

200

PE18 Series Oil Volume (cu. in./min.)

Hydraulic Pressure (psi)

Performance Specifications

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

VANGUARD JR.®SERIES, 18 CU. IN. / MIN.

Pumps

Mechanical Puller

Selection

For operating hydraulic crimping, cutting or

other tools:

• PE183C - For crimping or pressing applications. Has

special electrical circuitry to pulse/advance, hold at full

pressure, build to a predetermined pressure, release and

reset circuit. Features separate emergency return switch.

• PE184C - Allows operator to alternately operate a springreturn cutting and/or crimping tool without disconnecting

either tool. Select port connection with manual 4-way

valve, start pump with remote control hand switch and

extend connected tool. When hand switch is switched

to off, pump stops and automatic valve opens, allowing

tool to return. In center (neutral) position, manual control

valve holds tool in position at time valve is shifted.

powerteam.com 78

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

VANGUARD JR.®SERIES, 18 CU. IN. / MIN. PE18

SERIES

G

F

D

C

B

A

Technical Dimensions

Order

No. A B C D F G

Max.

Pressure

Output

rpm dBA at

Idle and

10,000

Amp Draw

115VAC at

10,000

Oil Del. (cu. in./min. @) † Prod.

Wt.

0 100 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PE182 16.00 4.75 8.00 7.13 6.00 5.13 10,000 12,000 85/90** 10.2 Amps 230 190 25 18 30.00

PE183 16.00 4.75 8.00 7.13 6.00 5.13 10,000 12,000 85/90** 10.2 Amps 230 190 25 18 30.00

PE183A 16.00 4.75 8.00 7.13 6.00 5.13 10,000 12,000 85/90** 10.2 Amps 230 190 25 18 30.00

PE184 16.00 4.75 8.00 7.13 6.00 5.13 10,000 12,000 85/90** 10.2 Amps 230 190 25 18 30.00

PE183-2* 18.50 7.25 11.50 10.00 9.50 8.00 10,000 12,000 85/90** 10.2 Amps 230 190 25 18 42.00

PE184-2* 18.50 7.25 11.50 10.00 9.50 8.00 10,000 12,000 85/90** 10.2 Amps 230 190 25 18 42.00

PE183C †† 16.00 4.75 8.00 7.13 6.00 5.13 10,000 12,000 85/90** 10.2 Amps 230 190 25 18 30.00

PE184C †† 16.00 4.75 8.00 7.13 6.00 5.13 10,000 12,000 85/90** 10.2 Amps 230 190 25 18 30.00

* 2.5 gal. reservoir.

** Measured at 3 ft. distance, all sides. †† Special application pumps for cutting, crimping or pressing.

* Also for use with special single-acting cylinder applications.

Available with 220VAC, 60/50 Hz motor (to order, place suffix “50-220” behind

pump order number). Specify voltage when ordering.

**

† Holds when motor is shut-off and valve is in “advance” position.

Pumps supplied with 2 gallon oil (usable oil is 355 cu. in.), will hold 2.50 gallon

when filled to within 1.50\" below reservoir cover plate.

††

∞ Not to be used for lifting.

† Typical delivery. Actual flow will vary with field conditions.

PumpsOrdering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

Function

Control

Switch

Motor Reservoir

Usable

Oil Cap.

(cu. in.)

Single-Acting 1/2 hp pump with 2-Way valve and 0.5

gallon reservoir. PE182 2-Way Advance

Return†

Remote Motor Control

(10 ft.) on/off

1/2 hp, 110/115VAC**

50/60 Hz, A.C., Single-Phase 104

Single-Acting 1/2 hp pump with 3-Way valve and 0.5

gallon reservoir. PE183 3-Way

Advance

Hold

Return

Remote Motor Control

(10 ft.) on/off

1/2 hp, 110/115VAC**

50/60 Hz, A.C., Single-Phase 104

Single-Acting 1/2 hp pump with 3-Way valve and 2 gallon

reservoir. PE183-2 3-Way

Advance

Hold

Return

Remote Control

(10 ft.)

1/2 hp, 110/115VAC**

50/60 Hz, A.C., Single-Phase 525††

Single-Acting 1/2 hp pump with dump valve and 0.5

gallon reservoir. PE183A∞ Auto./Dump

Pump

Advance

Return

Remote

(10 ft.)

1/2 hp, 110/115VAC**

50/60 Hz, A.C., Single-Phase 104

Single-Acting Special crimping pump. PE183C∞ Special, for

crimping only

Advance

Hold

Return†

Remote Motor Control

(25 ft.) on/off

1/2 hp, 110/115VAC**

50/60 Hz, A.C., Single-Phase 104

Single-Acting,

Double-Acting

1/2 hp pump for double-acting systems with

0.5 gallon reservoir. PE184 4-Way

Advance

Hold

Return

Remote Motor Control

(10 ft.) on/off

1/2 hp, 110/115VAC**

50/60 Hz, A.C., Single-Phase 104

Single-Acting,

Double-Acting

1/2 hp pump for double-acting systems with

2 gallon reservoir. PE184-2 4-Way

Advance

Hold

Return†

Remote Motor Control

(10 ft.) on/off

1/2 hp, 110/115VAC**

50/60 Hz, A.C., Single-Phase 525††

Single-Acting,

Double-Acting Special crimping pump. PE184C* 4-Way Advance

Return

Remote Control

(10 ft.) on/off

1/2 hp, 110/115VAC**

50/60 Hz, A.C., Single-Phase 104

79 powerteam.com

Features

■ Totally enclosed, fan cooled induction motor: 1 hp,

1,725 rpm, 60 Hz, single-phase. Thermal overload

protection.

■ Remote control, with 10 foot cord is standard on pumps

with solenoid valves. Manual valve pumps have “Stop”,

“Start” and “Run/Off/Pulse” switches.

■ Pump controls are moisture and dust resistant.

■ Motor drip cover with carrying handles and lifting lug.

■ Low noise level of 70 dBA@10,000 psi.

■ In the event of electrical interruption, pump shuts off

and will not start up until operator presses the pump

start button.

■ Units with remote have a 24VAC control circuit that

provides additional user/operator safety.

■ CSA rated for intermittent duty.

Model Shown:

PE213, PE214, PE214S

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP, PE21 22 CU. IN. / MIN. SERIES

PE21 series pump and RD5513 cylinder used in a

special press that produces pharmaceutical-grade

extracts for herbal medicines.

IDEAL FOR USE WITH SMALL MEDIUM

HYDRAULIC POWER TOOLS. 500 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

700

600

400

200

100

0

800

500

300

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

PE21 Series

PQ60 Series

PQ120 Series

Performance Specifications

Pumps

powerteam.com 80

Mechanical Puller

Selection Optional Cylinders

Power Team offers a wide variety of single-acting, double-acting, lock

nut, pancake and center hole cylinders to meet your requirements.

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

22 CU. IN. / MIN. PE21

SERIES

E

B

H J

A

G

F

C

D

K

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

No.

Valve

Function

Max. Amp Draw

@ 10,000 ††

Motor Reservoir

Usable

Oil Cap.

(psi) (cu. in.)

Single-Acting 1 hp pump with 2.5 gallon reservoir

and manual valve. PE213 3-Way 9520*

Advance

Hold

Return

115VAC -15 amps

230VAC -7.5 amps

1 hp, 115/230VAC

60 Hz, Single-Phase 590

Single-Acting

1 hp pump with 2.5 gallon reservoir

and solenoid-operated remote

valve.

PE213S 3-Way 9599†

Advance

Hold

Return

115VAC -15 amps

230VAC -7.5 amps

1 hp, 115/230VAC

60 Hz, Single-Phase 590

Double-Acting 1 hp pump with 2.5 gallon reservoir

and manual valve. PE214 4-Way 9506*

Advance

Hold

Return

115VAC -15 amps

230VAC -7.5 amps

1 hp, 115/230VAC

60 Hz, Single-Phase 590

Double-Acting

1 hp pump with 2.5 gallon reservoir

and solenoid-operated remote

valve.

PE214S 4-Way 9512†

Advance

Hold

Return

115VAC -15 amps

230VAC -7.5 amps

1 hp, 115/230VAC

60 Hz, Single-Phase 590

** For 2\" dia. swivel casters, order (4) No. 10494. † Shipping weight with manual valve; add 14 lbs. for pump with solenoid valve.

NOTE: Some Power Team pumps are available in special configurations not listed in this

catalog. For your special requirements please consult your local distributor or the

Power Team Customer Service.

Manual valve. Pump is equipped with RUN/OFF/PULSE switch for control of

motor.

*

† Solenoid valve. Pump is equipped with a remote control switch with 10 ft. cord.

Pre-wired at factory for this voltage. PE21 series available in 230VAC 60Hz or

220VAC 50Hz. Please specify when ordering. Example: for 60Hz order

PE213-230; for 50Hz order PE213-50-220.

††

Technical Dimensions

Order

No. A B C D E F G H J K**

Max.

Pressure

Output

rpm dBA at

Idle and

10,000

Oil Del. (cu. in./min. @) Prod.

Wt. †

100 1000 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PE21 Series 21.38 11.50 9.50 6.50 10.00 8.00 14.13 9.50 3.25 1/2-20 UNF 10,000 1,725 70* 270 29 27 22 98.00

PumpsMechanical Puller

Selection

Looking for great safety suggestions? Visit our

Resource Section to get a better understanding

of hydraulic and mechanical safety insights

on what to look for when working around

hydraulics.

Learn More - About Hydraulic Safety Insight Optional Cylinders

81 powerteam.com

Features

50

0 1000 2000 3000 4000 5000 6000 7000 8000 10,000

800

700

600

500

400

300

200

100

0

PE55 Series

PED Series

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

■ Two-speed pumps have the same low pressure and

high pressure flows from both valves.

■ Flows and pressures of each pump are independent.

■ Delivers 300 cu. in./min. of oil @ 100 psi and 25 cu.

in./min. @ 10,000 psi from each pump.

■ 1.5 hp, 110/115VAC, 60 Hz induction motor, 10 foot

remote control and 5 gallon steel reservoir.

■ Models available for operating single-acting or

double-acting cylinders.

■ Each power unit contains two separate pumps and two

separate valves allowing operator to control multiple

processes with one power unit.

■ Both pumps on each power unit are equipped with an

externally adjustable pressure relief valve.

■ Not recommended for frequent starting and stopping.

Model Shown:

PED253, PED254, PED254S

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP, PED UP TO 75 TON, 25 CU. IN. / MIN. SERIES

PED series pump and RD5513 cylinder used in a

special press that produces pharmaceutical-grade

extracts for herbal medicines.

IDEAL FOR RUNNING MULTIPLE TOOLS OR

CYLINDERS FROM ONE POWER UNIT.

RECOMMENDED FOR CYLINDERS UP TO 75 TONS.

Performance Specifications

Pumps

powerteam.com 82

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

UP TO 75 TON, 25 CU. IN. / MIN. PED

SERIES

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

No.

Valve

Function

Control

Switch

Motor Reservoir

Usable

Oil Cap.

(cu. in.)

Single-Acting 1.5 hp pump with 5 gallon reservoir. Valve

has \"Posi-Check\" feature. PED253 3-Way 9520 Advance

Return Remote Motor 1-1/2 hp, 115/230VAC

60 Hz, Single-Phase 1,000

Double-Acting 1.5 hp pump with 5 gallon reservoir. Valve

has \"Posi-Check\" feature. PED254 4-Way 9506

Advance

Hold

Return

Remote Motor 1-1/2 hp, 115/230VAC

60 Hz, Single-Phase 1,000

Double-Acting 1.5 hp pump with 5 gallon reservoir.

Solenoid-operated remote valve. PED254S 4-Way 9513

Advance

Hold

Return

Remote Control 1-1/2 hp, 115/230VAC

60 Hz, Single-Phase 1,000

NOTE: All remotes are 10 ft. long.

G

B

E F

C

H

A

D

** Amp draw at 10,000 psi, 230VAC 50/60 Hz is 15 Amps.

Technical Dimensions

Order

No. A B C D E F G H

Max.

Pressure

Output

rpm dBA at

Idle and

10,000

115VAC**

Amp Draw

at 10,000

Oil Del. (cu. in./min. @) Prod.

Wt.

100 1000 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PED Series 20.75 18.00 11.50 8.50 16.50 9.00 18.00 13.00 10,000 3.450 87/85* 22 300 40 35 25 170.00

Mechanical Puller

Selection

For dependable performance

of all your hydraulic pumps and

cylinders. Power Team specialty

blended oils contains foam

suppressant additives and has a

high viscosity index. Refer to the

Accessories section for complete

details

Hydraulic Fluids Optional Cylinders

Mechanical Puller

Selection

For independent multiple-cylinder

operation, feature needle valves for

precise manual control. Designed for

remote-mounted applications.

Ordering Information: 9644

Optional Cylinders 4 Port Control Manifold

Pumps

83 powerteam.com

Features

■ Deliver a powerful punch to operate single-acting

or double-acting cylinders.

■ Integral roll cage protects pump from abuse.

■ 1 hp, single-phase, permanent magnet motor.

■ High-performance-to-weight ratio.

■ Starts under full load even when voltage is reduced

to 50% of nominal rating.

■ Quiet operation: 82 dBA @ 10,000 psi and

87 dBA @ 0 psi.

■ Remote controls and/or solenoid valves feature

24VAC controls.

■ CSA rated for intermittent duty.

IDEAL FOR MAINTENANCE AND CONSTRUCTION

APPLICATIONS

Model Shown:

PE302S, PE302

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP, PE30 30 CU. IN. / MIN. SERIES

H

W L

H

W L

Technical Dimensions

Order

No.

Overall Dimensions Max.

Pressure

Output

dBA at

Idle and

10,000

Amp Draw

115VAC

at 10,000

Oil Del. (cu. in./min. @) Prod.

Wt.

Length Width Height 100 500 1,000 5,000 10,000 with Oil

(in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PE30 Series with

1.25 gallon reservoir 20.75 18.00 11.50 10,000 87/82 13 300 200 44 38 30 56.00

PE30 Series with

1.75 gallon reservoir 10.00 9.00 16.00 10,000 87/82 13 300 200 44 38 30 64.00

Mechanical Puller

Selection

PE30TWP Optional Cylinders

For Torque Wrench Pump Configurations,

refer to the Tools Section.

Performance Specifications

Pumps 50

0 1000 2000 3000 4000 5000 6000 7000 8000 10,000

400

350

300

250

200

150

100

50

0

PE30 Series

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

powerteam.com 84

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

30 CU. IN. / MIN. PE30

SERIES

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

No.

Valve

Function

Control

Switch

Motor Reservoir

Usable

Oil Cap.

(4,000 rpm) (cu. in.)

Single-Acting Base model 1 hp pump with 1.25 gallon

reservoir, & 2-position valve. PE302 3-Way,

2-Position 9584

Advance

Hold

Return

On/Off

Pulse Switch

1 hp 110/115VAC,

50/60 Hz, Single-Phase 280**

Single-Acting 1 hp pump with 1.75 gallon reservoir,

& 2-position valve. PE302-2 3-Way,

2-Position 9584

Advance

Hold

Return

On/Off

Pulse Switch

1 hp 110/115VAC,

50/60 Hz, Single-Phase 380***

Single-Acting 1 hp pump with 1.25 gallon reservoir,

2 position valve, & remote motor control. PE302R 3-Way,

2-Position 9584

Advance

Hold

Return

Remote Motor

Control (10 ft.)

1 hp 110/115VAC,

50/60 Hz, Single-Phase 280**

Single-Acting 1 hp pump with 1.75 gallon reservoir,

2-position valve, & remote motor control. PE302R-2 3-Way,

2-Position 9584

Advance

Hold

Return

Remote Motor

Control (10 ft.)

1 hp 110/115VAC,

50/60 Hz, Single-Phase 380***

Single-Acting

1 hp pump with 1.25 gallon reservoir,

solenoid-operated remote valve, &

remote motor control.

PE302S† 3-Way,

2-Position 9579

Advance

Hold

Return

Remote Motor

Control (10 ft.)

1 hp 110/115VAC,

50/60 Hz, Single-Phase 280**

Single-Acting

1 hp pump with 1.75 gallon reservoir,

solenoid-operated remote valve, &

remote motor control.

PE302S-2† 3-Way,

2-Position 9579

Advance

Hold

Return

Remote Motor

& Valve (10 ft.)

1 hp 110/115VAC,

50/60 Hz, Single-Phase 380

Single-Acting 1 hp pump with 1.25 gallon reservoir,

\"Auto Dump\" valve. PE302A∞ Auto Dump 9610

Automatic

Pilot

Operation

Remote Motor

Control (10 ft.)

1 hp 110/115VAC,

50/60 Hz, Single-Phase 280**

Single-Acting Base model 1 hp pump with 1.25 gallon

reservoir & 3-position valve. PE303 3-Way,

3-Position 9520*

Advance

Hold

Return

On/Off

Pulse Switch

1 hp 110/115VAC,

50/60 Hz, Single-Phase 280**

Single-Acting 1 hp pump with 1.75 gallon reservoir, &

3-position valve. PE303-2 3-Way,

3-Position 9520*

Advance

Hold

Return

On/Off

Pulse Switch

1 hp 110/115VAC,

50/60 Hz, Single-Phase 380***

Single-Acting 1 hp pump with 1.25 gallon reservoir,

3-position valve, & remote motor control. PE303R 3-Way,

3-Position 9520*

Advance

Hold

Return

Remote Motor

Control (10 ft.)

1 hp 110/115 VAC,

50/60 Hz, Single-Phase 280**

Single-Acting 1 hp pump with 1.75 gallon reservoir,

3- position valve, & remote motor control. PE303R-2 3-Way,

3-Position 9520*

Advance

Hold

Return

Remote Motor

Control (10 ft.)

1 hp 110/115VAC,

50/60 Hz, Single-Phase 380***

Double-Acting

Base model 1 hp pump with 1.25 gallon

reservoir, & 4-way valve for double-acting

systems

PE304

4-Way,

3-Position

Tandem

Center

9506*

Advance

Hold

Return

On/Off

Pulse Switch

1 hp 110/115VAC,

50/60 Hz, Single-Phase 280**

Double-Acting 1 hp pump with 1.75 gallon reservoir, &

4-way valve for double-acting systems PE304-2

4-Way,

3-Position

Tandem

Center

9506*

Advance

Hold

Return

On/Off

Pulse Switch

1 hp 110/115VAC,

50/60 Hz, Single-Phase 380***

Double-Acting

1 hp pump with 1.25 gallon reservoir,

4-way valve for double-acting systems, &

remote motor control.

PE304R

4-Way,

3-Position

Tandem

Center

9506*

Advance

Hold

Return

Remote Motor

Control (10 ft.)

1 hp 110/115VAC,

50/60 Hz, Single-Phase 280**

Double-Acting

1 hp pump with 1.75 gallon reservoir,

4-way valve for double-acting systems, &

remote motor control.

PE304R-2

4-Way,

3-Position

Tandem

Center

9506*

Advance

Hold

Return

Remote Motor

Control (10 ft.)

1 hp 110/115VAC,

50/60 Hz, Single-Phase 380***

Posi-Check® valve design, Posi-Check® guards against pressure loss when

valve is shifted from “advance” to “hold” position.

*

*** Shipped with 2 gal. of oil.

** Shipped with 1 gal. of oil (231 cu. in., 210 usable). † 115VAC, 60 Hz.

NOTE: For 220/230VAC, 50/60 Hz. add suffix “- 220” (example PE302-220).

Not to be used for lifting applications. Best suited for crimping, pressing &

punching applications.

∞

Pumps

85 powerteam.com

Features

Performance Specifications

■ Two-speed high-performance pump.

■ For use with single or double-acting cylinders at

operating pressures up to 10,000 psi.

■ Equipped with a 1-1⁄2 hp, 3,450 rpm single-phase, 60

Hz thermal protected induction motor that starts under

full load. Noise level of 77-81 dBA.

■ All equipped with a 10 foot remote control except

PE462S which has a 25 foot remote control.

■ 24VAC control circuit on all units with remote control.

■ CSA rated for intermittent duty.

Model Shown:

PE462A, PE462S, PE464

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP, PE46 46 CU. IN. / MIN. SERIES

PE46 series pump and RD5513 cylinder used in a

special press that produces pharmaceutical-grade

extracts for herbal medicines.

BEST SUITED FOR UNDER-THE-ROOF MAINTENANCE AND PRODUCTION APPLICATIONS. 10

0

50

0 1000 2000 3000 4000 5000 7000 10,000

500

400

300

200

100

0

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

PE46 Series

Pumps

powerteam.com 86

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

46 CU. IN. / MIN. PE46

SERIES

Available with 220VAC 50 Hz motor (to order, place suffix “50-220” behind

pump order number). Specify voltage when ordering.

*

Usable oil is calculated with the oil fill at the recommended level of 1.50\"

below reservoir cover plate.

***

** Advance position holds pressure with motor shut-off.

Advance position holds pressure with motor shut-off. Return position returns

cylinder.

†

†† 115VAC, 60 Hz.

††† The remote motor control switch on PE46 series pumps is 24VAC.

∞ Not to be used for lifting. When pump is shut-off, oil returns to reservoir.

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

No.

Valve

Function

Control

Switch

†††

Motor Reservoir

***Usable

Oil Cap.

(cu. in.)

Single-Acting Base model 1-1/2 hp pump

with 2.5 gallon metal reservoir. PE462 3-Way 9584 Advance

Return†

Remote Motor

Control (10 ft.)

on/off

1 1/2 hp, 115/230VAC*

60 Hz, Single-Phase 590

Single-Acting 1-1/2 hp pump with solenoid valve,

& 2.5 gallon metal reservoir. PE462S†† 3-Way 9579 Advance

Return**

Remote Motor/

Valve(25 ft.)

1 1/2 hp, 115/230VAC*

60 Hz, Single-Phase 590

Single-Acting 1-1/2 hp pump with “dump valve”,

& 2.5 gallon metal reservoir. PE462A∞

Auto/

Dump

3-Way

9610 Advance

Return

Remote Motor

Control (10 ft.)

on/off

1 1/2 hp, 115/230VAC*

60 Hz, Single-Phase 590

Double-Acting,

Multi Single-Acting

1-1/2 hp pump with 9500

double-acting valve, & 2.5 gallon

metal reservoir.

PE464 4-Way 9500

Advance

Hold

Return†

Remote Motor

Control (10 ft.)

on/off

1 1/2 hp, 115/230VAC*

60 Hz, Single-Phase 590

Double-Acting,

Multi Single-Acting

1-1/2 hp pump with 9592

double-acting valve, & 2.5 gallon

metal reservoir.

PE464S†† 3/4-Way 9592 Advance

Return**

Remote Motor/Valve

(10 ft.)

1 1/2 hp, 115/230VAC*

60 Hz, Single-Phase 590

** Requires 20 amp circuit.

Technical Dimensions

Order

No. A B C D E F G

Max.

Pressure

Output

rpm dBA at

Idle and

10,000

115VAC

Amp Draw

at 10,000

Oil Del. (cu. in./min. @) † Prod.

Wt.

100 1000 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PE46 Series 19.63 6.81 11.50 10.00 18.50 9.50 8.00 10,000 3,450 77/81* 25** 500 450 51 46 79.00

* Measured at 3 ft. distance, all sides. † Typical delivery. Actual flow will vary with field conditions.

A

B

G

F

D

C

E

Mechanical Puller

Selection

For dependable performance

of all your hydraulic pumps and

cylinders. Power Team specialty

blended oils contains foam

suppressant additives and has a

high viscosity index. Refer to the

Accessories section for complete

details

Hydraulic Fluids Optional Cylinders

Mechanical Puller

Selection

Heavy-duty and thermo plastic hydraulic hoses

to meet your requirements and safety factor.

Refer to the accessories section for details.

Hydraulic Hoses Optional Cylinders

Pumps

87 powerteam.com

Features

Mechanical Puller

Selection Torque Wrench Pumps Optional Cylinders

For Torque Wrench Pump Configurations,

refer to the Tools Section.

■ 1-1/8 hp, 12,000 rpm, 110/115VAC, 50/60 Hz universal

motor. Draws 25 amps at full load, starts at reduced

voltage.

■ True unloading valve achieves greater pump efficiency,

allowing higher flow at maximum pressure.

■ Reservoirs available in sizes up to 10 gallons, refer to

pump accessories page.

■ Lightweight and portable. Best performance-to-weight

ratio of all Power Team pumps.

■ 10 foot remote motor control (except PE552S which

has a 25 foot remote motor and valve control).

■ “Assemble to Order” System allows you to choose

from a wide range of pre-engineered, off-the-shelf

components to build a customized pump to fit specific

requirements. Refer to the “Assemble to Order” (ATO)

Pump Pages.

■ CSA rated for intermittent duty.

Model Shown:

PE554S, PE552, PE554W

SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP, PE55 VANGUARD®, 55 CU. IN. / MIN. SERIES

INDUSTRY LEADING HEAVY-DUTY PUMP FOR

MULTIPLE APPLICATIONS

* Amp draw at 10,000 psi, 230VAC 50/60 Hz is 15 Amps.

Technical Dimensions

Order

No. A B C D E F G

Max.

Pressure

Output

rpm dBA at

Idle and

10,000

115VAC*

Amp Draw

at 10,000

Oil Del. (cu. in./min. @) Prod.

Wt.

0 700 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PE55 Series 18.25 11.50 9.50 7.00 10.00 8.00 14.00 10,000 12,000 90/89* 25 704 440 74 56 65.00

4 mounting holes 1/2\"–20

Performance Specifications 50

0 1000 2000 3000 4000 5000 6000 7000 8000 10,000

800

700

600

500

400

300

200

100

0

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

PE55 Series

PED Series

A

D

F

C

E

B

G

Pumps

powerteam.com 88

SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

VANGUARD®, 55 CU. IN. / MIN. PE55

SERIES

Ordering Information

For Use With

Cylinder Type

Description Order

No.

***

Valve

Type

Valve

No.

Valve

Function

Control

Switch

††

Motor Reservoir

Usable

Oil Cap.

(cu. in.)

Single-Acting Base model 1-1/8 hp pump with 2.5 gallon

reservoir, & remote motor control PE550 - - - Remote Motor 1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Single-Acting Base model 1-1/8 hp pump with 5 gallon reservoir,

remote motor control. PE550-RP50 - - - Remote Motor 1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 1150

Single-Acting Base model 1-1/8 hp pump with 2.5 gallon

reservoir, remote motor control, & 3-way valve. PE552 3-Way 9582 Advance

Return **

Remote

Motor

1 1/8 hp*, 110/115 VAC 50/60 Hz,

Single-Phase 525

Single-Acting 1-1/8 hp pump with 2.5 gallon reservoir, remote motor

control, & solenoid-operated remote valve. PE552S 3-Way 9579 Advance Hold

Return

Remote

Motor

& Valve

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Single-Acting 1-1/8 hp pump with 5 gallon reservoir, remote motor

control, & solenoid-operated remote valve. PE552S-RP50 3-Way 9579 Advance Hold

Return

Remote

Motor

& Valve

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 1150

Single-Acting 1-1/8 hp pump with 2.5 gallon reservoir, remote motor

control, & \"Auto Dump\" valve. PE552A∞ Auto/

Dump 9610 Advance

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Single-Acting 1-1/8 hp pump with 2.5 gallon reservoir, remote motor

control, & \"Auto Dump\" valve. PE552F∞ Auto/

Dump 9610A Advance

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Single-Acting 1-1/8 hp pump with 2.5 gallon reservoir. Valve has

\"Posi-Check\" feature PE553 3-Way† 9520 Advance Hold

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Single-Acting 1-1/8 hp pump with 5 gallon reservoir. Valve has

\"Posi-Check\" feature PE553-RP50 3-Way† 9520 Advance Hold

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 1150

Double-Acting Base model 1-1/8 hp pump with 2.5 gallon

reservoir, and 4-way valve for double-acting systems PE554 4-Way† 9506 Advance Hold

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Double-Acting Base model 1-1/8 hp pump with 5 gallon

reservoir, and 4-way valve for double-acting systems PE554-RP50 4-Way† 9506 Advance Hold

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 1150

Double-Acting Pump equipped with 3/4-way solenoid valve,

and 5 gallon reservoir PE554S-RP50 3/4-Way 9592 Advance Hold

Return

Remote

Motor

& Valve

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 1150

Double-Acting

Weather-resistant model 1-1/8 hp pump with 2.5

gallon reservoir, and 4-way valve for double-acting

systems.

PE554W 4-Way† 9506 Advance Hold

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Double-Acting Weather-resistant model 1-1/8 hp pump with 5 gallon

reservoir, and 4-way valve for double-acting systems. PE554W-RP50 4-Way† 9506 Advance Hold

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Double-Acting 1-1/8 hp pump with 2.5 gallon reservoir, and 9500

tandem center valve for double-acting systems. PE554T 4-Way 9500 Advance Hold

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Double-Acting For use with single-acting Spring Seat, Stressing

Jack or double-acting cylinder. Includes hour meter. PE554P 4-Way 9500 Advance Hold

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Double-Acting \"For use with single-acting or double-acting Power

Seat, Stressing Jacks ONLY.\" PE554PT 4-Way 9628 Advance Hold

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Double-Acting Pump suitable to run multiple spring return tools. PE554C 4-Way \"9511

†††\"

Advance Hold

Return

Remote

Motor

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Double-Acting Pump equipped with 3/4-way solenoid valve. PE554S 3/4-Way 9592

Advance

Hold

Return **

Remote

Motor

& Valve

1 1/8 hp*, 110/115VAC 50/60 Hz,

Single-Phase 525

Pumps available with 230VAC, 60/50 Hz motors. Specify voltage when

ordering. See “Assemble to Order” pump options

*

** Holds with motor shut-off.

† Valves have Posi-Check® feature.

†† All remotes are 10 ft. long except for PE552S which is 25 ft. long.

Valving allows alternate and independent operation of two different spring return

tools. Valve holds pressure only while valve is in “A” or “B” port position with

pump motor shut-off.

†††

∞ Not to be used for lifting.

Pumps

89 powerteam.com

Features

■ Pump offers long, trouble-free life in the most

demanding work environments.

■ For operating single or double-acting cylinders, or

stressing jacks.

■ Powered by 1-1⁄8 hp, 115VAC, 50/60 Hz single-phase

motor. Starts under load, even at reduced voltages at

construction sites.

■ Optional fan-driven external oil cooler includes rollover

guard.

■ Insulated carrying handle.

■ Integral 4” dia. fluid-filled pressure gauge with steel

bezel complies with ASME B40.1 Grade A.

■ Sealed 0.754 gallon (usable) reservoir. Reservoir drain

port is standard.

■ Oil level sight gauge for accurate oil level monitoring.

■ External spin-on filter removes contaminants from

circulating oil to maximize pump, valve and cylinder/

tool life.

■ CSA rated for intermittent duty.

Model Shown:

PE604T, PE604PT

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP, PE60 POST-TENSIONING, 56 CU. IN. / MIN. SERIES

The PE60 used for pre-stressing application

COMPACT, LIGHTWEIGHT PUMP. EXCELLENT

CHOICE FOR RUGGED APPLICATIONS AND LOW

VOLTAGE STARTING.

Performance Specifications 50

0 1000 2000 3000 4000 5000 6000 7000 8000 10,000

800

700

600

500

400

300

200

100

0

Hydraulic Pressure (psi)

PE60 Series Oil Volume (cu. in./min.)

Pumps

powerteam.com 90

TWO-SPEED, SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

POST-TENSIONING, 56 CU. IN. / MIN. PE60

SERIES

A

B

E

G

F

D

Technical Dimensions

Order

No. A B C D E F G

Max.

Pressure

Output

rpm dBA at

Idle and

10,000

115VAC

Amp Draw

at 10,000

Oil Del. (cu. in./min. @) Prod.

Wt.

0 700 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PE604T 9.31 11.50 18.25 6.00 15.00 4.00 3/8 NPTF 10,000 10,000 80/85 25 704 440 74 56 50.00

PE604PT 9.31 11.50 18.25 6.00 15.00 4.00 3/8 NPTF 10,000 12,000 80/85 25 704 440 74 56 51.00

NOTE: Contact Factory for PE60 pump models with other control and valve options.

NOTE: For 220/230VAC, 50/60 Hz, single-phase models, add -220 suffix.

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

No.

Valve

Function

Control

Switch

Motor Reservoir

Usable

Oil Cap.

(cu. in.)

Single-Acting, Spring

Seat, Stressing Jack or

Double-Acting

1-1/8 hp pump with 0.75 gallon

reservoir & valve for double-acting

systems.

PE604T 4-Way/

3-Position 9500

Advance

Hold

Return

On/Off

Pulse

1-1/8 hp, 115VAC

60/50 Hz, Single-Phase 157

Single-Acting or

Double-Acting

Power Seat,

Stressing Jacks Only

1-1/8 hp pump with 0.75 gallon

reservoir & a special valve for

post- tensioning application only.

PE604PT 4-Way/

3-Position

9628

Model C

Advance

Hold

Sequenced

Return

On/Off

Pulse

1-1/8 hp, 115VAC

60/50 Hz, Single-Phase 157

NOTE: Unloading pressure is 1,000 psi.

C

Mechanical Puller

Selection

For dependable performance

of all your hydraulic pumps and

cylinders. Power Team specialty

blended oils contains foam

suppressant additives and has a

high viscosity index. Refer to the

Accessories section for complete

details

Hydraulic Fluids Optional Cylinders

Mechanical Puller

Selection

Looking for great safety suggestions? Visit our

Resource Section to get a better understanding

of hydraulic and mechanical safety insights on

what to look for when working around hydraulics

Learn More - About Hydraulic Safety Insight Optional Cylinders

PumpsMechanical Puller

Selection Optional: Oil Cooler Kit Optional Cylinders

For Use

With:

Kit

Order No.

Voltage Wt.

(lbs.)

PE604T

or

PE604PT

252511 115VAC 5.00

252512 220VAC 5.00

91 powerteam.com

Features

■ For operating single or double-acting cylinders.

■ Metal shroud keeps dirt and moisture out of motor and

electrical components.

■ Electrical shut-down feature prevents unintentional

restarting of motor following an electrical service

interruption.

■ Internal relief valve limits pressure to 10,000 psi.

■ External relief valve is adjustable from 1,000 to 10,000

psi.

■ Pumps operate below maximum OSHA noise limitation

(74-76 dBA).

■ Start and operate under full load, even with voltage

reduced by 10%.

■ CSA rated for intermittent duty.

Model Shown:

PQ603, PQ604, PQ604S

SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP, PQ60 60 CU. IN. / MIN. SERIES

Hydraulic Machine Press Operation.

PUMP DESIGNED SPECIFICALLY FOR HEAVYDUTY, EXTENDED CYCLE OPERATION.

Performance Specifications 500 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

700

600

400

200

100

0

800

500

300

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

PE21 Series

PQ60 Series

PQ120 Series

Mechanical Puller

Selection

For dependable performance

of all your hydraulic pumps and

cylinders. Power Team specialty

blended oils contains foam

suppressant additives and has a

high viscosity index. Refer to the

Accessories section for complete

details

Hydraulic Fluids Optional Cylinders

Pumps

powerteam.com 92

SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

60 CU. IN. / MIN. PQ60

SERIES

E

B

H J

A

G

F

C

D

K

** Total weight with oil and 3-way solenoid valve. Subtract 10 lbs. to obtain weight of pump with manual valve.

Technical Dimensions

Order

No. A B C D E F G H J K

Max.

Pressure

Output

rpm dBA at

Idle and

10,000

Oil Del. (cu. in./min. @) Prod.

Wt.

100 1000 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PQ60 Series 25.13 14.25 15.50 7.25 12.13 13.31 14.69 9.31 4.81 1/2-20 UNF 10,000 1,725 74/76 * 730 70 65 60 169.00**

Ordering Information

Mechanical Puller

Selection Optional: Swivel Casters Optional Cylinders

Order

No.

Description Wt.

(lbs.)

10494 2” dia. swivel casters

(4 Required) 0.30

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

No.

Valve

Function

Max. Amp Draw

@ 10,000

Motor

††

Reservoir

Usable

Oil Cap.

(psi) (cu. in.)

Single-Acting 2 hp pump with 5.7 gallon reservoir

and manual valve. PQ603 3-Way 9520*

Advance

Hold

Return

115VAC -22 amps

230VAC -11 amps

2 hp, 230VAC

60 Hz, Single-Phase 1,250

Single-Acting

2 hp pump with 5.7 gallon reservoir

and solenoid-operated remote

valve.

PQ603S 3-Way 9599†

Advance

Hold

Return

115VAC -22 amps

230VAC -11 amps

2 hp, 230VAC

60 Hz, Single-Phase 1,250

Double-Acting 2 hp pump with 5.7 gallon reservoir

and manual valve. PQ604 4-Way 9506*

Advance

Hold

Return

115VAC -22 amps

230VAC -11 amps

2 hp, 230VAC

60 Hz, Single-Phase 1,250

Double-Acting

2 hp pump with 5.7 gallon reservoir

and solenoid-operated remote

valve.

PQ604S 4-Way 9512†

Advance

Hold

Return

115VAC -22 amps

230VAC -11 amps

2 hp, 230VAC

60 Hz, Single-Phase 1,250

Manual valve. Pump is equipped with RUN/OFF/PULSE switch for control of

motor.

* PQ60 series also available in 115VAC, 60 Hz or 220VAC, 50 Hz. Please specify

when ordering. Example: for 60 Hz order PQ603-115; for 50 Hz order PQ603-50-220.

††

† Solenoid valve. Pump is equipped with a remote control switch with 10 ft. cord. NOTE: Some Power Team pumps are available in special configurations not listed in this

catalog. For your special requirements please consult your local distributor or the

Power Team factory.

* Measured at 3 ft. distance, all sides.

Mechanical Puller

Selection

Mobilize your hydraulic pumps with the

cart # PC200 - refer to the accessories

section for details. Cart can be used

with the following pumps; PA60, PA64,

PA55/PE55, PE18, PE21, PQ60,

PQ120, PG55 series and pumps with

optional 5- and 10-gallon reservoirs;

Nos. RP50, RP51, RP101 and RP103.

(Pump not included)

Universal Pump Cart Optional Cylinders

Pumps

93 powerteam.com

Features

■ Start and operate under full load, even with voltage

reduced by 10%.

■ Electrical shut-down feature prevents unintentional

restarting of motor following an electrical service

interruption.

■ Internal relief valve limits pressure to 10,000 psi.

■ External relief valve is adjustable from 1,000 to 10,000

psi.

■ Pump pre-wired at factory with a 3 hp, 460VAC, 60 Hz,

three-phase motor. Other electrical configurations are

available. See ordering information on the following

page.

■ 24VAC control circuit on units with remote control for

added user/operator safety.

■ Thermal overload protection, motor starter and heater

element supplied as standard equipment.

■ Metal shroud keeps dirt and moisture out of motor and

electrical components.

■ Pumps operate below OSHA noise limitation

(74-76 dBA).

■ CSA rated for intermittent duty.

Model Shown:

PQ1203, PQ1204, PQ1204S

SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP, PQ 120 CU. IN. / MIN. SERIES

PQ series pump used to drive piers to lift and

stabilize building foundation.

PUMP DESIGNED SPECIFICALLY FOR HEAVYDUTY, EXTENDED CYCLE OPERATION.

Performance Specifications 500 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

700

600

400

200

100

0

800

500

300

PE21 Series

PQ60 Series

PQ120 Series Oil Volume (cu. in./min.)

Hydraulic Pressure (psi)

Pumps

powerteam.com 94

SINGLE AND DOUBLE-ACTING, ELECTRIC PUMP,

120 CU. IN. / MIN. PQ

SERIES

E

B

H J

A

G

F

C

D

K

** Total weight with oil and 3-way solenoid valve. Subtract 10 lbs. to obtain weight of pump with manual valve.

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

No.

Valve

Function

Max. Amp Draw

@ 10,000

Motor

††

Reservoir

Usable

Oil Cap.

(psi) (cu. in.)

Single-Acting 3 hp pump with 5.7 gallon reservoir

and manual valve. PQ1203 3-Way 9520*

Advance

Hold

Return

230VAC -10.5 amps

460VAC -5.3 amps

3 hp, 460VAC

60 Hz, Three-Phase 1,250

Single-Acting

3 hp pump with 5.7 gallon reservoir

and solenoid-operated remote

valve.

PQ1203S 3-Way 9599†

Advance

Hold

Return

230VAC -10.5 amps

460VAC -5.3 amps

3 hp, 460VAC

60 Hz, Three-Phase 1,250

Double-Acting 3 hp pump with 5.7 gallon reservoir

and manual valve. PQ1204 4-Way 9506*

Advance

Hold

Return

230VAC -10.5 amps

460VAC -5.3 amps

3 hp, 460VAC

60 Hz, Three-Phase 1,250

Double-Acting

3 hp pump with 5.7 gallon reservoir

and solenoid-operated remote

valve.

PQ1204S 4-Way 9512†

Advance

Hold

Return

230VAC -10.5 amps

460VAC -5.3 amps

3 hp, 460VAC

60 Hz, Three-Phase 1,250

PQ120 series also available in 230VAC 60 Hz or 220/380VAC 50 Hz. Please

specify when ordering. Example: for 60 Hz order PQ1204S-230; for 50 Hz.

order PQ1204S-50-220 or PQ1204S-50-380.

PQ120 Series also available in 575VAC 60 Hz. Consult the factory.

††

NOTE:

Manual valve. Pump is equipped with RUN/OFF/PULSE switch for control of

motor.

*

† Solenoid valve. Pump is equipped with a remote control switch with 10 ft. cord.

Mechanical Puller

Selection Optional: Swivel Casters (4) Optional Cylinders

Order

No.

Description Wt.

(lbs.)

10494 2” dia. swivel casters 0.30

Mechanical Puller

Selection Analog Gauges Optional Cylinders

Improve your system visibility and safety by

adding an in-line hydraulic gauge to your

circuit.

9440 (2.5 in.), 9052 (4 in.), and 9089 (6 in.)

Technical Dimensions

Order

No. A B C D E F G H J K

Max.

Pressure

Output

rpm dBA at

Idle and

10,000

Oil Del. (cu. in./min. @) Prod.

Wt. **

0 1000 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PQ120 Series 25.13 14.25 15.50 7.25 12.13 13.31 14.69 9.31 4.81 1/2-20 UNF 10,000 1,725 73/78 730 160 130 120 164.00

Pumps

95 powerteam.com

Features

■ Two-speed high output pump delivers up to 5 gpm of

oil.

■ Low noise level of 73-80 dBA.

■ Integral electrical shut-down feature prevents

unintentional restarting of motor following an electrical

service interruption. Over-current protection prevents

damage to motor as a result of overheating.

■ “Stop” and “Start” control buttons are 24VDC.

■ PE4004 has a 4-way/3-position manual valve.

■ PE4004S has a 4-way/3-position solenoid valve with a

24VDC remote hand switch.

■ External pressure relief valve is adjustable from 1,500

to 10,000 psi.

■ Heavy-duty 4” diameter casters assure easy

maneuvering.

■ 20 gallon (3,927 cu. in. usable) reservoir has a low oil

level sight gauge.

■ Powered by a dual voltage 10 hp, three-phase, 1,725

rpm motor.

■ Three-phase motor has all the electrical components

necessary to operate the pump. The customer has

no hidden charges when making a purchase.

■ Deliver 1,200 cu. in./min. of oil @ 200 psi, 420 cu. in./

min. of oil @ 10,000 psi.

■ CSA rated for intermittent duty.

Model Shown:

PE4004S

DOUBLE-ACTING, ELECTRIC PUMP, PE 420 CU. IN. / MIN. SERIES

PUMP DESIGNED SPECIFICALLY FOR HEAVYDUTY, EXTENDED CYCLE OPERATION.

PE4004S pump and RD3006 cylinder used in a

special press which repairs damaged chain links

for the shipping industry.

Performance Specifications 400 800 1200 1600 2000 3000 4000

5000

6000

7000

8000 10,000

1400

1200

1000

800

600

400

200

0

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

PE400 Series

Pumps

powerteam.com 96

Technical Dimensions

Order

No. A B C D E F

Max.

Pressure

Output

rpm dBA at

Idle and

10,000

Max. Amp Draw

@ 10,000

Oil Del. (cu. in./min. @) Prod.

Wt. *

200 1,200 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (psi) (psi) (lbs.)

PE4004 36.38 25.00 24.00 21.25 15.50 21.50 10,000 1,725 73/80 42 @230VAC 1,200 1,050 450 420 492.00

PE4004S 36.38 25.00 24.00 21.25 15.50 21.50 10,000 1.725 73/80 21 @460VAC 1,200 1,050 450 420 506.00

DOUBLE-ACTING, ELECTRIC PUMP,

420 CU. IN. / MIN. PE

SERIES

E

B

F

C

D

A

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

No.

Valve

Function

Max. Amp Draw

@ 10,000

Motor Reservoir

Usable

Oil Cap. †

(psi) (cu. in.)

Double-Acting 10 hp pump with 20 gallon reservoir

and manual valve. PE4004 4-Way 9506

Advance

Hold

Return

230VAC -42 amps

460VAC -21 amps

10 hp, 208/230/460VAC*

60 Hz, 3-Phase 3,927†

Double-Acting

10 hp pump with 20 gallon reservoir

and solenoid-operated remote

valve.

PE4004S 4-Way 9512**

Advance

Hold

Return

230VAC -42 amps

460VAC -21 amps

10 hp, 208/230/460VAC*

60 Hz, 3-Phase 3,927†

* Factory wired for this voltage. For 230VAC, 60Hz order PE4004S-230. † Usable oil is calculated with oil fill at recommended level at 2.25\" below cover plate.

** Solenoid valve with remote control. NOTE: Valves for spring return cylinders are available upon request. Consult the factory.

Mechanical Puller

Selection

Precision metering for controlled cylinder

piston return. Operation: Permits free flow

when extending cylinder, built-in pressure

relief and Posi-Check® locks and holds load

in raised position until operator opens valve.

Ordering number: 9596

Optional Cylinders Load Lowering Valve

Mechanical Puller

Selection Analog Gauges Optional Cylinders

Improve your system visibility and safety by

adding an in-line hydraulic gauge to your

circuit.

9440 (2.5 in.), 9052 (4 in.), and 9089 (6 in.)

Mechanical Puller

Selection

Looking for great safety suggestions? Visit our

Resource Section to get a better understanding

of hydraulic and mechanical safety insights on

what to look for when working around hydraulics

Learn More - About Hydraulic Safety Insight Optional Cylinders

Pumps* Add 5” and 8 lbs. when casters are mounted. (Units are supplied with four 4” dia. swivel casters.)

97 powerteam.com

Features

■ 5/8 hp universal electric motor (50/60 Hz cycle),

intermittent duty pump.

■ Two-stage pump for rapid ram advance.

■ Operational under low-line voltage conditions.

■ Designed for use with spring-returned remote tools.

■ High-pressure safety relief valve.

■ Remote hand control with 10-foot cord.

■ Carrying handle.

■ Factory filled oil reservoir.

■ Pressure matched quick-coupler supplied.

■ Piston-type high-pressure pump supercharged by a

low-pressure pump.

■ Optional operating pressures available (consult Power

Team factory for details).

■ Optional carrying case.

EXTREMELY DURABLE YET LIGHTWEIGHT

AND OPERATE UNDER LOW-LINE VOLTAGE

CONDITIONS.

Features Model Shown:

PE-NUT

PE

SERIES

Mechanical Puller

Selection CAUTION Optional Cylinders

DESIGNED FOR CRIMPING APPLICATIONS ONLY!

This system should not be used for lifting.

Ordering Information

Order

No.

Overall Dimensions Oil Delivery Reservoir Prod.

Wt.

With Oil A B C

100

(psi)

10,000

(psi)

Oil

Cap.

Usable

W Oil Cap. idth Length Depth

(in.) (in.) (in.) (cu. in./min.) (cu. in./min.) (cu. in.) (cu. in.) (lbs.)

PE-NUT 6.50 14.38 8.25 160 60 93 43 28.00

PE-NUTC* 6.50 14.38 8.25 160 60 93 43 28.00

*Includes Case

Mechanical Puller

Selection Electrical Data Optional Cylinders

Electric Motor Electric Control

5/8 hp, 10,000 rpm

115VAC, 50/60 Hz

11 amp current draw

(115VAC @ 10,000 PSI)

Remote control

with 10-foot cord

WARNING

B

A C

TWO-SPEED, ELECTRIC CRIMPING PUMP

30 CU. IN. / MIN.

Pumps

powerteam.com 98

Features

TWO-SPEED, GAS HYDRAULIC CRIMPING PUMP

130 CU. IN. / MIN.

■ 6 hp Briggs & Stratton engine.

■ Manual control valve.

■ High-pressure safety relief valve.

■ Protective roll cage.

■ For use with single acting tools.

■ 5.5 hp Honda OHV-type engine.

■ Solenoid valve with remote hand control with 10’ cord.

■ Two-stage pump for rapid advance.

■ High-pressure safety relief valve.

■ Protective roll cage.

■ For use with either single or double-acting tools.

PG1203-CP

PG1203/4S-CP

TWO-STAGE PUMP FOR CRIMPING APPLICATIONS

Features Model Shown:

PG1203/4S-CP

PG

SERIES

Mechanical Puller

Selection CAUTION Optional Cylinders

DESIGNED FOR CRIMPING APPLICATIONS ONLY!

This system should not be used for lifting.

Ordering Information

Order

No.

Overall Dimensions Oil Delivery Reservoir Prod.

Wt.

With Oil A B C

100

(psi)

10,000

(psi)

Oil

Cap.

Usable

W Oil Cap. idth Length Depth

(in.) (in.) (in.) (cu. in./min.) (cu. in./min.) (gal.) (cu. in.) (lbs.)

PG1203-CP 19.75 21.75 24.50 480 130 3 700 154.00

PG1203/4S-CP 19.75 21.75 24.50 480 130 3 700 154.00

B A

C

Mechanical Puller

Selection

Heavy-duty and thermo plastic hydraulic hoses

to meet your requirements and safety factor.

Refer to the accessories section for details.

Hydraulic Hoses Optional Cylinders

Pumps

99 powerteam.com

Features

Gasoline Powered Hydraulic Pumps like this PG303 Performance Specifications help provide hydraulic force at remote locations.

Features Model Shown:

PG304, PG554

SINGLE AND DOUBLE-ACTING, GASOLINE PUMP, PG UP TO 75-150 TON, 30-55 CU. IN. / MIN. SERIES

■ Powered by a 4-cycle, 2 hp Honda engine giving it the

lowest weight to horsepower ratio of all gasoline driven

pumps.

■ Has an aluminum reservoir with 375 cu. in. of usable

oil.

■ PG30 series pumps are equipped with roll cages to

protect pump from damage.

■ PG303 is for single-acting cylinders, has a 9520 valve

with separate internal return line which allows oil from

running pump to return to reservoir, independently of

cylinder return oil, when valve is in “return” position.

■ PG304 is for double-acting cylinders, has a 9506 4-way

(tandem center) valve.

■ 6 hp Intek “Diamond Edge” 4-cycle, by Briggs &

Stratton.

■ 5 gallon reservoir.

■ PG553 has a 9520 3-way valve for single-acting

cylinders.

■ PG554 has a 9506 4-way valve for double-acting

cylinders.

■ Optional roll cage available.

■ A logical choice at work sites where electricity or

compressed air are unavailable. For single or

double-acting cylinders at operating pressures up to

10,000 psi.

■ All gasoline engine/hydraulic pumps feature

Posi-Check® valve to guard against pressure loss

when valve is shifted from “advance” to “hold.”

PG303 and PG304 (Up to 75 Ton)

PG553 and PG554 (Up to 150 Ton)

GASOLINE POWER IDEAL FOR REMOTE

LOCATIONS. 500 1000 2000 3000 4000 5000 6000 7000 8000 9000 10,000

500

450

400

350

300

250

200

150

100

50

0

Hydraulic Pressure (psi)

Oil Volume (cu. in./min.)

PG553, PG554 Series

PG303, PG304 Series

Pumps

powerteam.com 100

SINGLE AND DOUBLE-ACTING, GASOLINE PUMP,

UP TO 75-150 TON, 30-55 CU. IN. / MIN. PG

SERIES

E

A

D

C

B

F E

B

F

C

A

D

PG303 and PG304 PG553 and PG554

Ordering Information

For Use With

Cylinder Type

Description Order

No.

Valve

Type

Valve

No.

Valve

Function

Reservoir

Usable

Oil Cap.

Horsepower Cycle

(cu. in.)

Single-Acting 2 hp pump with 2 gallon reservoir

and single-acting valve. PG303 3-Way 9520

Advance

Hold

Return

375 2 2

Single-Acting 6 hp pump with 5.7 gallon reservoir

and single-acting valve. PG553 3-Way 9520

Advance

Hold

Return

1,300* 6 4

Double-Acting 2 hp pump with 2 gallon reservoir

and double-acting valve. PG304 4-Way 9506

Advance

Hold

Return

375 2 2

Double-Acting 6 hp pump with 5.7 gallon reservoir

and double-acting valve. PG554 4-Way 9506

Advance

Hold

Return

1,300* 6 4

* First stage oil delivery from 0-400 psi @ 230 cu. in. per minute minimum.

Technical Dimensions

Order

No. A B C D E F

Max.

Pressure

Output

rpm Oil Del. (cu. in./min. @) Prod.

Wt.

100 1000 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (lbs.)

PG303, PG304 14.88 10.38 9.50 16.00 5.13 13.50 10,000 6,000 275* 40 35 30 32.00

PG553, PG554 22.00 18.00 12.50 8.63 16.63 20.25 10,000 3,600 480 75 70 55 120.00

* Usable oil is calculated with oil fill at recommended level at 1/2\" below cover plate.

Mechanical Puller

Selection

Heavy-duty and thermo plastic hydraulic hoses

to meet your requirements and safety factor.

Refer to the accessories section for details.

Hydraulic Hoses Optional Cylinders

Pumps

101 powerteam.com

Features

Technical Dimensions

Order

No. A B C D E F

Max.

Pressure

Output

rpm Oil Del. (cu. in./min. @) Prod.

Wt.

100 1,000 5,000 10,000 with Oil

(in.) (in.) (in.) (in.) (in.) (in.) (psi) (psi) (psi) (psi) (psi) (lbs.)

PG120HM 23.00 15.50 14.25 19.00 13.31 12.13 10,000 3,600 480 175 150 130 150.00

PG1203 27.88 20.25 14.25 26.25 13.50 18.25 10,000 3,600 480 175 150 130 154.00

PG1204 27.88 20.25 14.25 26.25 13.50 18.25 10,000 3,600 480 175 150 130 154.00

PG1204S 27.88 20.25 14.25 26.25 13.50 18.25 10,000 3,600 480 175 150 130 161.00

PG1200M-4 42.13 18.00 25.00 42.50 26.25 7.25 10,000 3,600 480 175 150 130 260.00

PG1200M-4D 42.13 18.00 25.00 42.50 26.25 7.25 10,000 3,600 480 175 150 130 280.00

PG4204 50.25 52.00 52.00 — — — 10,000 3,600 1,240 1,120 475 400 435.00

PG4204S 50.25 52.00 52.00 — — — 10,000 3,600 1,240 1,120 475 400 440.00

■ A logical choice at work sites where electricity or

compressed air are unavailable. For single or doubleacting cylinders at operating pressures to 10,000 psi.

■ All gasoline engine/hydraulic pumps feature

Posi-Check® valve to guard against pressure loss

when valve is shifted from “advance” to “hold.”

■ PG1200 Series pumps powered by a Honda 4-cycle,

5.5 hp engine with automatic decompression and

electronic ignition. Deliver over 0.5 gallon (130 cu. in.)

of oil per minute at 10,000 psi.

■ A 5 gallon reservoir means adequate capacity for multicylinder applications. Dual element air cleaner protects

engine from dusty environments.

■ Heavy-duty “roll cage” provides pick-up points for lifting.

Horizontal bars on PG1203, PG1204 and PG1204S

protect unit, provide hand holds for carrying.

■ Rubber anti-skid insulation on bottom of reservoir

resists skidding and dampens vibration. PG1200M-4

and PG1200M-4D include a pump cart with 12” wheels.

■ Adjustable external pressure regulator.

■ CSA rated for intermittent duty.

Model Shown:

PG4204S, PG1204S, PG1200M-4D

TWO-SPEED, SINGLE AND DOUBLE-ACTING, GASOLINE PUMP,

MAXIMUM OUTPUT, 130-420 CU. IN. / MIN.

TWO-SPEED HIGH-PERFORMANCE PUMPS IDEAL

FOR CONSTRUCTION, STRUCTURE MOVING AND

RIGGING APPLICATIONS.

PG120HM PG1203, PG1204, PG1204S PG1200M-4 and PG1200M-4D PG4204 and PG4204S

A

B C

D

E

F

C

E

B D

A

F

E

B

F

C

A

D

B

PG

SERIES

Pumps