Eaton B-Line系列电气外壳介绍 - 电子画册在线预览、各类电子画册在线制作-云展网平台

Type 4X Panel Enclosures

Ground-Mount Enclosures

Type 4X Double-Door Free-Standing with 3-Point Locking

Illustration Sheet and Catalog Number

Notes: Four lifting eyes are furnished when C dimension is 24” (609 mm) or larger.

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Additional quarter-turn latch provided on top and bottom of all enclosures.

mounting channel

body stiffener

(see note)

3-point

handle

print pocket

(supplied)

lifting eye

rotation rotation

8.87

(225)

A-1.62

(41)

B-2.75

(70)

B-1.62

(41)

Front View Side View

Section X-X

Type 4X Panel Enclosures

237 B-Line series electrical enclosures Eaton

ID = Inside Dimension

A ID

B ID C ID

5.35*

(136)

A-6.63

(159)

removable

center post

grounding &

bonding provision

for body grounding &

bonding provision

for door

X X

* From flange opening to bottom of enclosure

Type 4X Panel Enclosures

Ground-Mount Enclosures

Type 4X Double-Door Dual Access Free-Standing with 3-Point Locking

Data Sheet

Finish

• Doors and sides of body have a smooth #4 brushed finish

Accessories

• Full and half panels

• Side and swing panels

• Panel Support Kit

• Panel Lifting Kit

• Channel mounting hardware

• Equipment Rack Mounts

• Lights

• Window kits

• Replacement handle (black), BD-PKHB, see page 429

Construction

• Enclosure and doors are fabricated from (12) gauge Type 304

stainless steel

• All continuous welded seams are finished smooth

• Doors are secured to the body with removable concealed

stainless hinges and a center locating 3-point key-locking and

padlock handle mechanism

• Modern bevel profile on both sides of enclosure doors

• Additional quarter-turn latches provided top and bottom on all

enclosure doors

• Doors have a seamless poured in-place gasket

• Formed lip around enclosure openings to diverts liquids and

contaminants

• Ground studs provided on doors and body

• Removable centerpost for easy panel installation

• Dual-access construction available for back-to-back panel

and equipment mounting

• Print pockets provided

• Mounting channels are welded inside for locating panels or

rack-mount equipment along enclosure depth

• Provisions for mounting flourescent light

• Large lifting eyebolts

• Hole seals are provided to seal enclosure after removal of lifting

eyebolts

Discount Schedule: C2

Subclass: U43

Application

• Houses electrical controls and instruments

• Easy access panels or rack mounts for houseing

optional equipment

• Intended for indoor or outdoor use

• Protects against corrosion, windblown dust and

rain, splashing water and hose directed water

Standards

• UL 508A listed, Type 3R, 4, 4X, 12

• CSA C22.2 No.94 certified, Type 3R, 4, 4X, 12

• Conforms to NEMA standard for Type 3, 3R, 4, 4X, 12

• E.I.A. RS-310-D

Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

238

Type 4X Panel Enclosures

Eaton B-Line series electrical enclosures

Type 4X Panel Enclosures

Ground-Mount Enclosures

Type 4X Double-Door Dual Access Free-Standing with 3-Point Locking

Illustration Sheet and Catalog Number

Notes: Four lifting eyes are furnished when C dimension is 30” (762 mm) or larger.

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Additional quarter-turn latch provided on top and bottom of all enclosures.

mounting

channel

3-point

handle

print pocket

(supplied)

lifting eye

rotation rotation

8.87

(225)

A-1.62

(41)

B-2.75

(70)

B-1.62

(41)

Front View

Side View

Type 4X Panel Enclosures

239

Enclosure Enclosure Size

Height x Width x Depth D

A x B x C

Catalog Number in. mm in. mm

724824-4XSFSDDA3PT 72.00 x 48.00 x 24.00 1829 x 1219 x 609 29.12 739

726024-4XSFSDDA3PT 72.00 x 60.00 x 24.00 1829 x 1524 x 609 29.12 739

727224-4XSFSDDA3PT 72.00 x 72.00 x 24.00 1829 x 1829 x 609 29.12 739

907224-4XSFSDDA3PT 90.00 x 72.00 x 24.00 2286 x 1829 x 609 38.12 968

726036-4XSFSDDA3PT 72.00 x 60.00 x 36.00 1829 x 1524 x 609 29.12 739

B-Line series electrical enclosures Eaton

ID = Inside Dimension

A ID

B ID

C ID

5.35*

(136)

A-6.63

(159)

removable

center post

grounding &

bonding provision

for body

grounding &

bonding provision

for door

Section X-X

X X

* From flange opening to bottom of enclosure

Type 4X Panel Enclosures

Ground-Mount Enclosures

Type 4X Double-Door EnviroShield™ Free-Standing with 3-Point Locking

Data Sheet

Accessories

• Full and half panels

• Side panels

• Swing panels

• Touch-up paint

• Mounting legs

• Rack mounting angles

• Swing out mounting frames

• Replacement handle, BD-PKHSS, see page 429

• See Accessories section

Construction

• Enclosure and door are fabricated from (12) gauge

Type 304 or Type 316L stainless steel

• All continuous welded seams are finished smooth

• Doors are secured to the body with removable concealed

stainless hinges and a center locating 3-point key-locking and

padlock stainless steel handle mechanism

• Modern bevel profile on both sides of enclosure doors

• Removable center post

• Doors have a fixed, neoprene IV2 closed cell gasket

• Ground stud provided on doors and body

• Print pocket provided

• Large bolt-on lifting eyes are mounted to the sides of the

enclosure

• Mounting channels are welded inside for locating panels or

rack mounts along enclosure depth, as well as mounting

studs for fixed panels

• Swing panels, single full and single half panels can be

installed in double-door enclosures when the center post is

used

• A variety of optional panels and accessories are available,

(see pages 242 - 253)

Discount Schedule: C2

Subclass: VS0 (Type 304)

VT0 (Type 316L)

Application

• Houses electrical controls and electrical instruments in

harsh environments

• Provides quick and easy access indoors and out

• Protects against circulating dust, falling dirt, dripping

non-corrosive liquids, rain, sleet, ice, splashing and

hose directed water

Standards

• UL 508A listed, Type 3R, 4, 4X, 12

• CSA C22.2 No.94 certified, Type 3R, 4, 4X, 12

• Conforms to NEMA standard for Type 3, 3R, 4, 4X, 12

• E.I.A. RS-310-D

• NSF Criteria C-2

Finish

• Doors and sides of body have a smooth #4 brushed

finish

Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

240

Type 4X Panel Enclosures

Eaton B-Line series electrical enclosures

Type 4X Panel Enclosures

Enclosure Enclosure Size

Catalog Number Height x Width x Depth

Type 304 Type 316L A x B x C D E

Stainless Steel Stainless Steel in. mm in. mm in. mm

ES-604812-4XS ES-604812-4XSS6 60.00 x 48.00 x 12.00 1524 x 1219 x 305 65.87 1673 64.44 1637

ES-604816-4XS ES-604816-4XSS6 60.00 x 48.00 x 16.00 1524 x 1219 x 406 65.87 1673 64.44 1637

ES-604820-4XS ES-604820-4XSS6 60.00 x 48.00 x 20.00 1524 x 1219 x 508 65.87 1673 64.44 1637

ES-604824-4XS ES-604824-4XSS6 60.00 x 48.00 x 24.00 1524 x 1219 x 609 65.87 1673 64.44 1637

ES-606012-4XS ES-606012-4XSS6 60.00 x 60.00 x 12.00 1524 x 1524 x 305 65.87 1673 64.44 1637

ES-606016-4XS ES-606016-4XSS6 60.00 x 60.00 x 16.00 1524 x 1524 x 406 65.87 1673 64.44 1637

ES-606020-4XS ES-606020-4XSS6 60.00 x 60.00 x 20.00 1524 x 1524 x 508 65.87 1673 64.44 1637

ES-606024-4XS ES-606024-4XSS6 60.00 x 60.00 x 24.00 1524 x 1524 x 609 67.87 1724 64.44 1637

ES-726012-4XS ES-726012-4XSS6 72.00 x 60.00 x 12.00 1829 x 1524 x 305 77.87 1978 76.44 1941

ES-726016-4XS ES-726016-4XSS6 72.00 x 60.00 x 16.00 1829 x 1524 x 406 77.87 1978 76.44 1941

ES-726020-4XS ES-726020-4XSS6 72.00 x 60.00 x 20.00 1829 x 1524 x 508 77.87 1978 76.44 1941

ES-726024-4XS ES-726024-4XSS6 72.00 x 60.00 x 24.00 1829 x 1524 x 609 77.87 1978 76.44 1941

ES-727212-4XS ES-727212-4XSS6 72.00 x 72.00 x 12.00 1829 x 1829 x 305 77.87 1978 76.44 1941

ES-727216-4XS ES-727216-4XSS6 72.00 x 72.00 x 16.00 1829 x 1829 x 406 77.87 1978 76.44 1941

ES-727220-4XS ES-727220-4XSS6 72.00 x 72.00 x 20.00 1829 x 1829 x 508 77.87 1978 76.44 1941

ES-727224-4XS ES-727224-4XSS6 72.00 x 72.00 x 24.00 1829 x 1829 x 609 79.87 2028 76.44 1941

Ground-Mount Enclosures

Type 4X Double-Door EnviroShield™ Free-Standing with 3-Point Locking

Illustration Sheet and Catalog Number

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Type 4X Panel Enclosures

241 B-Line series electrical enclosures Eaton

body

stiffeners

adjustable back

& side panel

mounting

provisions

padlock

3-point locking

mechanism

lighting

bracket

integrated lifting eyes

removable center

post

adjustable top &

bottom mounting

provisions

grounding & bonding

provisions on door &

body

sloped trough collar

C+2.09 (53)

B-2.75

(70)

C-1.18

(30)

C+0.23

(6)

Min=A-7.64 (194)

Max=A-7.33 (186)

B/2-3.50

(89)

4.00

(101)

5.35*

(136)

6.19

(157) 2.50

(63)

D E ID

Front View

Side View

B ID

A ID

C ID

ID = Inside Dimension

rotation rotation

Section X-X

X X

* From flange opening to bottom of enclosure

Type 4X Panel Enclosures

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Free-Standing Enclosure Accessories

Type 4X Single-Door Discount Schedule: C2

Full and Half Panel Subclass: DSD

Illustration Sheet and Catalog Number

Note: Full and Half panel for single-door, single and dual-access enclosures are (12) gauge steel and furnished with panel

side brackets and all hardware necessary for channel and panel mounting. Half Panels can be mounted in either

the upper or lower portion of the enclosure. Free standing design permits the panel to adjust along the depth of

the enclosure. With dual-access enclosures, Full and Half panels can be mounted back-to-back.

Full Panel Mounting

Half Panel Mounting

Full Panel

Half Panel

(lower mount)

Half Panel

(upper mount)

B-1.62

(41)

B-1.62

(41)

A-1.62

(41)

C panel

side bracket

included

(see illustration

1 page 248

and detail

sheet page

249)

242

Type 4X Panel Enclosures

Full Swing Panel (Single-Door)

Panel Panel Size Fits

Height x Width Enclosure

Catalog A x B C Height x Width

Number in. mm in. mm in. mm

AF6024P 47.87 x 19.87 1216 x 505 23.12 587 60.00 x 24.00 1524 x 610

AF6036P 47.87 x 31.87 1216 x 809 23.12 587 60.00 x 36.00 1524 x 914

AF7224P 59.87 x 19.87 1521 x 505 29.12 740 72.00 x 24.00 1829 x 610

AF7230P 59.87 x 25.87 1521 x 657 29.12 740 72.00 x 30.00 1829 x 762

AF7236P 59.87 x 31.87 1521 x 809 29.12 740 72.00 x 36.00 1829 x 914

AF9024P 77.87 x 19.87 1978 x 505 38.12 968 90.00 x 24.00 2286 x 610

AF9036P 77.87 x 31.87 1978 x 809 38.12 968 90.00 x 36.00 2286 x 914

Half Swing Panel (Single-Door)

Panel Panel Size Fits

Height x Width Enclosure

Catalog A x B C Height x Width

Number in. mm in. mm in. mm

AF6024HP 24.75 x 19.87 629 x 505 23.12 587 60.00 x 24.00 1524 x 610

AF6036HP 24.75 x 31.87 629 x 809 23.12 587 60.00 x 36.00 1524 x 914

AF7224HP 30.75 x 19.87 781 x 505 29.12 587 72.00 x 24.00 1829 x 610

AF7230HP 30.75 x 25.87 781 x 657 29.12 587 72.00 x 30.00 1829 x 762

AF7236HP 30.75 x 31.87 781 x 809 29.12 587 72.00 x 36.00 1829 x 914

AF9024HP 39.75 x 19.87 1010 x 505 38.12 968 90.00 x 24.00 2286 x 610

AF9036HP 39.75 x 31.87 1010 x 809 38.12 968 90.00 x 36.00 2286 x 914

Eaton B-Line series electrical enclosures

Type 4X Panel Enclosures

Free-Standing Enclosure Accessories

Type 4X Double-Door Discount Schedule: C2

Full Panel Subclass: DSD

Illustration Sheet and Catalog Number

Notes: Full Panel for double-door, single and dual-access enclosures are (10) gauge steel and furnished with Panel

Brackets, Center Post assembly, panel handle kit and all hardware necessary for channel and panel

mounting. The Center Post assembly offers additional support of panel and equipment. Free-standing

design permits the panel to adjust along the depth of the enclosure. With dual-access enclosures, Full and

Half Panels can be mounted back-to-back.

Full Panel Mounting

Full Panel

Panel Panel Size Fits Enclosure

Height x Width Height x Width

Catalog A x B C D

Number in. mm in. mm in. mm in. mm

AF6048P 47.87 x 43.87 1216 x 1114 23.12 587 21.12 530 60.00 x 48.00 1524 x 1219

AF6060P 47.87 x 55.87 1216 x 1419 23.12 587 27.12 689 60.00 x 60.00 1524 x 1524

AF7248P 59.87 x 43.87 1521 x 1114 29.12 740 21.12 530 72.00 x 48.00 1829 x 1219

AF7260P 59.87 x 55.87 1521 x 1419 29.12 740 27.12 689 72.00 x 60.00 1829 x 1524

AF7272P 59.87 x 67.87 1521 x 1724 29.12 740 33.12 841 72.00 x 72.00 1829 x 1829

AF9048P 77.87 x 43.87 1978 x 1114 38.12 968 21.12 530 90.00 x 48.00 2286 x 1219

AF9072P 77.87 x 67.87 1978 x 1724 38.12 968 33.12 841 90.00 x 72.00 2286 x 1829

panel side bracket included

(see illustration 1 page 248

and detail sheet page 249)

center post included with

double-door full panel

(see illustration 5 page 248)

A A-1.62

(41)

B-1.62

(41)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Type 4X Panel Enclosures

243 B-Line series electrical enclosures Eaton

Type 4X Panel Enclosures

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Free-Standing Enclosure Accessories

Type 4X Double-Door Discount Schedule: C2

Half Panel Subclass: DSD

Illustration Sheet and Catalog Number

Note: Half panel for double-door, single and dual-access enclosures are (12) gauge steel and furnished with Panel Brackets and all

hardware necessary for channel and panel mounting. A Center Post assembly or a double-door panel support bracket (catalog

number AFSUP2) for additional support of the panel is optional and sold separately. Free-standing design permits the panel

to adjust along the depth of the enclosure. With dual-access enclosures, Full and Half Panels can be mounted back-to-back.

panel side bracket included

(see illustration 1 page 248

and detail sheet page 249)

center post or double-door

panel support bracket

(sold separately)

(see illustration 5 page 248)

Half Panel

(upper mount)

Half Panel

(lower mount)

Half Panel Mounting

B-1.62

(41)

244

Type 4X Panel Enclosures

Panel Panel Size Fits Enclosure

Height x Width Height x Width

Catalog A x B C D

Number in. mm in. mm in. mm in. mm

AF6048HP 24.75 x 43.87 629 x 1114 23.12 587 21.12 536 60.00 x 48.00 1524 x 1219

AF7248HP 30.75 x 43.87 781 x 1114 29.12 740 21.12 536 72.00 x 48.00 1829 x 1219

AF7260HP 30.75 x 55.87 781 x 1419 29.12 740 7.12 181 72.00 x 60.00 1829 x 1524

AF7272HP 30.75 x 67.87 781 x 1724 29.12 740 33.12 841 72.00 x 72.00 1829 x 1829

AF9048HP 39.75 x 43.87 1010 x 1114 38.12 968 21.12 536 90.00 x 48.00 2286 x 1219

AF9072HP 39.85 x 67.87 1012 x 1724 38.12 968 33.12 841 90.00 x 72.00 2286 x 1829

Eaton B-Line series electrical enclosures

Type 4X Panel Enclosures

Free-Standing Enclosure Accessories

Type 4X Discount Schedule: C2

Side Panel And Center Post

Illustration Sheet and Catalog Number

Side Panel

Side Panel Mounting Center Post Assembly

Side Panel - Subclass: DSD

Panel Panel Size Fits Enclosure

Height x Width Height Depth*

A x B C

Catalog Number in. mm in. mm in. mm in. mm

AF6018SP 48.37 x 13.87 1229 x 340 23.12 587 60.00 1524 18.00 457

AF7218SP 60.37 x 13.87 1533 x 340 29.12 740 72.00 1829 18.00 457

AF7224SP 60.37 x 19.87 1533 x 505 29.12 740 72.00 1829 24.00 610

AF9018SP 78.37 x 13.87 1991 x 340 38.12 968 90.00 2286 18.00 457

AF9024SP 78.37 x 19.87 1991 x 505 38.12 968 90.00 2286 24.00 457

Center Post - Subclass: DS0

Center Post Fits

Enclosure

A B Height

Catalog Number in. mm in. mm in. mm

AF60CPS 58.37 1483 23.12 587 60.00 1524

AF72CPS 70.37 1787 29.12 740 72.00 1829

AF90CPS 88.37 2245 38.12 968 90.00 2286

Side Panels are (12) gauge steel and furnished with

hardware necessary for channel mounting. They will fit

any width enclosure and are adjustable along its depth,

however, when Full or Half Panels are installed, movement

will be restricted and with some depths make side

mounting prohibitive.

* Back panels restrict the movement of side panels and will prohibit

mounting in some depths. See detail sheet for back panel spacing.

Center Post assembly is furnished with all double-door Full

Panels and includes hardware necessary for channel and panel

mounting. The Center Post is optional on double-door Half

Panels and Swing Panel mounting and must be ordered

separately. It attaches to the top and bottom channels making

it adjustable along the depth of the enclosure. See illustration

#5 on the Detail Sheet-page 248.

C B

A A-2.12

(54)

B-1.62

(41)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Type 4X Panel Enclosures

245 B-Line series electrical enclosures Eaton

Type 4X Panel Enclosures

Free-Standing Enclosure Accessories

Type 4X Single-Door Discount Schedule: C2

Full and Half Swing Panel Subclass: DSD

Illustration Sheet and Catalog Number

Note: Full Swing Panel and Half Swing Panel for single-door, single and dual-access enclosures are (12) gauge steel, have

a dual hinge swing panel bracket and furnished with Panel Brackets and all hardware necessary for channel and

panel mounting. Panels can be installed so they hinge on either the left or right side. In addition, Half Panels can

be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to be

adjustable along the depth of the enclosure. The dual hinge will allow the inner panel to swing completely out of

the door opening when within 5.50 inches of the front. With dual-access enclosures, Full and Half Swing Panels

can be mounted back-to-back.

Full Swing Panel

hinge

3.18

(81)

3.18

(81)

2.06

(52)

2.06

(52)

hinge

swing panel

bracket assembly

included (See detail

sheet page 250)

Full Swing Panel Mounting Half Swing Panel Mounting

panel side bracket

included

(see illustration 1

page 248 and

detail sheet page

250)

Half Swing Panel

(lower mount)

Half Swing Panel

(upper mount)

C A

246

Type 4X Panel Enclosures

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Full Swing Panel (Single-Door)

Panel Panel Size Fits

Height x Width Enclosure

Catalog A x B C Height x Width

Number in. mm in. mm in. mm

AF6024SWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 24.00 1524 x 610

AF6036SWP 47.87 x 30.75 1216 x 781 23.12 587 60.00 x 36.00 1524 x 914

AF7224SWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 24.00 1829 x 610

AF7230SWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 30.00 1829 x 762

AF7236SWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 36.00 1829 x 914

AF9024SWP 77.87 x 18.75 1978 x 476 38.12 968 90.00 x 24.00 2286 x 610

AF9036SWP 77.87 x 30.75 1978 x 781 38.12 968 90.00 x 36.00 2286 x 914

Half Swing Panel (Single-Door)

Panel Panel Size Fits

Height x Width Enclosure

Catalog A x B C Height x Width

Number in. mm in. mm in. mm

AF6024HSWP 24.75 x 18.75 629 x 476 23.12 587 60.00 x 24.00 1524 x 610

AF6036HSWP 24.75 x 30.75 629 x 781 23.12 587 60.00 x 36.00 1524 x 914

AF7224HSWP 30.75 x 18.75 781 x 476 29.12 740 72.00 x 24.00 1829 x 610

AF7230HSWP 30.75 x 24.75 781 x 629 29.12 740 72.00 x 30.00 1829 x 762

AF7236HSWP 30.75 x 30.75 781 x 781 29.12 740 72.00 x 36.00 1829 x 914

AF9024HSWP 39.75 x 18.75 1010 x 476 38.12 968 90.00 x 24.00 2286 x 610

AF9036HSWP 39.75 x 30.75 1010 x 781 38.12 968 90.00 x 36.00 2286 x 914

Eaton B-Line series electrical enclosures

Type 4X Panel Enclosures

Free-Standing Enclosure Accessories

Type 4X Double-Door Discount Schedule: C2

Full and Half Swing Panel Subclass: DSD

Illustration Sheet and Catalog Number

Note: Full Swing Panel and Half Swing Panel for double-door, single and dual-access enclosures are (12) gauge steel, have a dual hinge

swing panel bracket, and furnished with hardware necessary for side channel mounting. A Center Post assembly and Center

Bracket must be ordered separately. Panels can be installed so they hinge either on the left or right side. In addition, Half Panels can

be mounted in either the upper or lower portion of the enclosure. Free-standing design permits the panel to adjust along the depth of

the enclosure. The dual hinge will allow the inner panel to swing completely out of the door opening when within 5.50 inches of the

front. With dual-access enclosures, Full and Half Swing Panels can be mounted back-to-back.

hinge

Swing Panel Mounting

swing panel

bracket assembly

included (see

detail sheet page

250)

center post and panel

mounting center bracket

(sold separately)

(see illustration 2 and 5

page 248)

Half Swing Panel

(lower mount) Full Swing Panel

B B

3.18

(81)

3.18

(81)

A Center Post assembly and Center Bracket must be ordered separately.

panel mounting

center bracket

(sold separately)

(see illustration

2 page 248)

Full Swing Panel (Single-Door)

Panel Panel Size Fits

Height x Width Enclosure

Catalog A x B C Height x Width

Number in. mm in. mm in. mm

AF6024SWP 47.87 x 18.75 1216 x 476 23.12 587 60.00 x 48.00 1524 x 1219

AF7224SWP 59.87 x 18.75 1521 x 476 29.12 740 72.00 x 48.00 1829 x 1219

AF7230SWP 59.87 x 24.75 1521 x 629 29.12 740 72.00 x 60.00 1829 x 1524

AF7236SWP 59.87 x 30.75 1521 x 781 29.12 740 72.00 x 72.00 1829 x 1829

AF9024SWP 77.87 x 18.75 1978 x 781 38.12 968 90.00 x 48.00 2286 x 1219

AF9036SWP 77.87 x 30.75 1978 x 781 38.12 968 90.00 x 72.00 2286 x 1829

Half Swing Panel (Single-Door)

Panel Panel Size Fits

Height x Width Enclosure

Catalog A x B C Height x Width

Number in. mm in. mm in. mm

AF6024HSWP 24.75 x 18.75 629 x 476 23.12 587 60.00 x 48.00 1524 x 1219

AF7224HSWP 30.75 x 18.75 781 x 476 29.12 740 72.00 x 48.00 1829 x 1219

AF7230HSWP 30.75 x 24.75 781 x 629 29.12 740 72.00 x 60.00 1829 x 1524

AF7236HSWP 30.75 x 30.75 781 x 781 29.12 740 72.00 x 72.00 1829 x 1829

AF9024HSWP 39.75 x 18.75 1010 x 476 38.12 968 90.00 x 48.00 2286 x 1219

AF9036HSWP 39.75 x 30.75 1010 x 781 38.12 968 90.00 x 72.00 2286 x 1829

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Type 4X Panel Enclosures

247 B-Line series electrical enclosures Eaton

Type 4X Panel Enclosures

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Free-Standing Enclosure Accessories

Type 4X Discount Schedule: C2

Miscellaneous Accessories Subclass: DS0

Illustration Sheet and Catalog Number

Miscellaneous Accessories

Catalog Number Description Illustration Quantity

AFSBRKT1 Panel mounting side bracket 1 1

AFCBRKT3 Panel mounting center bracket 2 3

AFCMH3 Channel mounting hardware 3 3

AFPSUP2 Double-door panel support bracket 4 2

Illustration 1 Illustration 2

Illustration 3

Illustration 4 Illustration 5

See catalog number page 245

channel

spring nut

channel

spring nut

channel spring nut

panel

nut

panel bolt

channel

mounting

hardware

panel

support

bracket

install panel

bolt in this hole

for top of panel

support

panel bolt

panel nut

panel bolt

hardware

panel bolt

hardware

panel nut

panel mounting stud

panel nut

panel mounting

stud

panel mounting

stud

channel

mounting

hardware

channel

mounting

hardware

channel

mounting

hardware

side bracket

center post

post bracket

center bracket

bracket

mounting

hardware

bracket

mounting

hardware

bracket

mounting

hardware

bracket

mounting hardware

channel

spring nut

248

Type 4X Panel Enclosures

Eaton B-Line series electrical enclosures

Type 4X Panel Enclosures

Free-Standing Enclosure Details

Type 4X

Panel and Enclosure

Detail Sheet

enclosure width -5.75

(146)

Single Door

(section view showing full panels mounted back-to-back)

Double Door

(section view showing full panels mounted back-to-back)

1/2 enclosure width -5.75

(146)

(of enclosure)

2.87 min

(73)

3.00 min

(76)

3.75 min

(95)

2.87

(73)

2.87

(73)

2.87 min

(73)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Type 4X Panel Enclosures

249 B-Line series electrical enclosures Eaton

Type 4X Panel Enclosures

Free-Standing Enclosure Details

Type 4X

Swing Panel and Enclosure

Detail Sheet

enclosure width -6.06

(154)

Single Door

(section view showing swing panels mounted back-to-back)

Double Door

(section view showing swing panels mounted back-to-back)

5.00 min

(127)

3.18

(81)

3.18

(81)

(of enclosure)

2.87

(73)

2.87 min

(73)

2.87

(73)

2.87 min

(73)

1/2 enclosure width -6.06

(154)

5.00 min

(127)

250

Type 4X Panel Enclosures

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Eaton B-Line series electrical enclosures

Type 4X Panel Enclosures

Free-Standing Enclosures Accessories

Rack Mounting Angles Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Kit contains two (2) full length ‘L’ angles, installation instructions,

and hardware necessary to mount in single-door enclosures.

Yellow Zinc finish.

Hole Pattern

Angle Profile

3.50

(89)

1.50

(38)

.75

(19)

1.44

(36)

O.D.

1.50

(38)

O.D.

1.625

(41)

O.D.

2.29

(58)

A = 1.75 (44)

B = .625 (16)

C = .500 (13)

D = .295 (7)

E = .250 (6)

equipment mounting holes

to accept #10-32, #12-24, or

M6 cage nuts

(sold separately)

equipment

mounting holes

to accept #10-32,

#12-24, or M6

cage nuts

(sold separately)

.375 (9)

square

hole

Hole Pattern

A = 1.75 (44)

B = .625 (16)

C = .500 (13)

D = .295 (7)

E = .250 (6)

.375 (9)

square

hole

‘U’ Shaped Mounting Angles

Catalog Fits Enclosure Mounting

Number Height L U’s

in. mm in. mm

ES-48RMA-U 48 1219 42.00 1067 24

ES-60RMA-U 60 1524 54.25 1378 31

ES-72RMA-U 72 1829 66.50 1689 38

ES-90RMA-U 90 2286 78.75 2000 45

Kit contains two (2) full length ‘U’ angles, installation instructions,

and hardware necessary to mount in single-door enclosures.

Yellow Zinc finish.

Heavy Duty Rack Mounting Angles are designed for mounting 19” (482mm) equipment in free-standing enclosures. A Center

Post Assembly, “AFxxCPS” on page 245, and a Panel Mounting Center Bracket, “AFCBRKT3” on page 248, (each sold

separately) are required when mounting in any double door enclosure. Mounting holes are spaced at the 19” “EIA”

Standard and are provided to accept #10-32, #12-24, or M6 cage nuts (sold in packages of 100), on page 252.

Note: L-shaped angles are universal

and can be rotated to accommodate

19” or 23” EIA mounting equipment.

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Type 4X Panel Enclosures

251

‘L’ Shaped Mounting Angles

Catalog Fits Enclosure Mounting

Number Height L U’s

in. mm in. mm

ES-48RMA-L 48 1219 42.00 1067 24

ES-60RMA-L 60 1524 54.25 1378 31

ES-72RMA-L 72 1829 66.50 1689 38

ES-90RMA-L 90 2286 78.75 2000 45

B-Line series electrical enclosures Eaton

Type 4X Panel Enclosures

Free-Standing Enclosures Accessories

Frames & Fasteners Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Swing-Out Rack Mounted Frame

Catalog Fits Enclosure

Number Height L

in. mm in. mm

ES-48SORMF 48 1219 36.91 937

ES-60SORMF 60 1524 49.16 1248

ES-72SORMF 72 1829 59.66 1515

ES-90SORMF 90 2286 77.18 1960

Heavy Duty Swing-Out Rack Mounting Frames are designed for mounting 19” (482mm)

equipment in free standing enclosures. A Center Post Assembly, “AFxxCPS” on

page 245, and a Panel Mounting Center Bracket, “AFCBRKT3” on page 248, (each

sold separately) are required when mounting in any double door enclosure.

Mounting holes are spaced per the “EIA” Standard and are provided to accept #10-32,

#12-24, or M6 cage nuts (sold in packages of 100). Swing-Out Rack Mounting frames

have white powder coated finish.

Screws & Cage Nuts

Catalog

Number Description Finish

Screws

E2MA1032PHMS100 #10-32 Phillips Clear Zinc

E2MA1224PHMS100 #12-24 Phillips Clear Zinc

E2MAM6PHMS100 M6 Phillips Yellow Zinc

Cage Nuts

E2MACN1032100 #10-32 Threads Clear Zinc

E2MACN1224100 #12-24 Threads Clear Zinc

E2MACNM6100 M6 Threads Yellow Zinc

Sold in bags of (100)

Screws

Cage Nuts

19.47

(494)

O.D.

equipment

mounting holes

to accept #10-32,

#12-24, or M6

cage nuts

(sold separately -

see below)

Hole Pattern

A = 1.75 (44)

B = .625 (16)

C = .500 (13)

D = .295 (7)

E = .250 (6)

.375 (9)

square

hole

Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

252

Type 4X Panel Enclosures

Eaton B-Line series electrical enclosures

Type 4X Panel Enclosures

Free-Standing Enclosures Accessories

Floor Stand & Enclosure Stabilizer Kits Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Floor Stand Kits

Catalog

Number ABC

Stainless in. mm in. mm in. mm

MFK12XS 12.0 305 10.06 256 - -

MFK16XS 16.0 406 14.06 357 - -

MFK18XS 18.0 457 16.06 408 7.00 178

MFK20XS 20.0 508 18.06 459 8.00 203

MFK24XS 24.0 610 22.06 560 10.00 254

Floor Stand Kits are intended for use with Enviro Shield Type 4X, Type 4 and Type 12 Enclosures

where floor support is required. Each kit consists of two (10) gauge legs and hardware for

mounting. At the base of each leg is a prepunched plate (see drawing). Steel kits have a gray

polyester powder paint finish. Stainless steel kits are fabricated from 304 stainless steel. Standard

Floor Stand Kits are 12 inches (305 mm) high. For special heights, special material or non-standard

construction consult the factory.

.50 D hole

(13)

4.62

(117)

7.87

(200)

A B

Base 12 - 16 Deep

Sanitary Leg Kit

Catalog Number Description

ES-SMFK6 Set of four (4) legs

Kit allows space between enclosure and floor for compliance in NSF

environments 13/4” (44mm) adjustment provides flexibility in all

applications. Four (4) legs per kit, maintains UL/cUL Type 4X rating

when properly installed.

6.00

(152)

leg sleeve

hex nut

flat washer

sealing

washer

.75

(19)

.75

(19)

1.75

(44)

adjustment

4.62

(117)

.50 D hole

(13)

7.87

(200)

A C B

Base 18 - 24 Deep

9.87

(251)

7.87

(200)

12.00

(305)

Floor Stand Kit

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Type 4X Panel Enclosures

253 B-Line series electrical enclosures Eaton

Type 4X Panel Enclosures

254

Type 4X Panel Enclosures - Notes

Eaton B-Line series electrical enclosures

Polycarbonate Enclosures Type 4X Hinged and Lift-Off Screw Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255a-255b

JIC Fiberglass Enclosures Type 4X Lift-Off Screw Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256-257

JIC Fiberglass Enclosures Type 4X Hinged Screw Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258-259

JIC Fiberglass Enclosures Type 4X Hinged Quick-Release Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260-261

JIC Fiberglass Enclosures Type 4X Hinged Quick-Release Window Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262-263

JIC Fiberglass Enclosures Type 4X Premier™ Series Hinged Screw Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264-265

JIC Fiberglass Enclosures Type 4X Premier™ Series Hinged Quick-Release Cover . . . . . . . . . . . . . . . . . . . . . 266-267

JIC Fiberglass Enclosures Type 4X Premier™ Series Hinged Quick-Release Clear Cover . . . . . . . . . . . . . . . . . . . . . . . 268-269

JIC Fiberglass Enclosures Type 4X Small Junction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270-271

JIC Fiberglass Enclosures Type 4X Small Junction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272-273

Fiberglass Wall-Mount Enclosures Type 3R Continuous Hinge Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274-275

Fiberglass Wall-Mount Enclosures Type 4X Single-Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276-277

Fiberglass Wall-Mount Enclosures Type 4X Double-Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278-279

Fiberglass Ground-Mount Enclosures Type 4X Free-Standing Single-Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280-281

Fiberglass Ground-Mount Enclosures Type 4X Free-Standing Double-Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282-283

Fiberglass Pushbutton Enclosures Type 4X In-Line 30mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284-285

Fiberglass Pushbutton Enclosures Type 4X In-Line 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286-287

Fiberglass Pushbutton Enclosures Type 4X Multi-Hole 30mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288-289

Non-Metallic Back Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290-291

Non-Metallic Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292-294

Type 4X Non-Metallic

Type 4X Non-Metallic Enclosures

255 B-Line series electrical enclosures Eaton

Polycarbonate Enclosures

Type 4X Hinged and Lift-Off Screw Covers

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight hot

compression molded non-Metallic reinforced polycarbonate

• Neoprene rope syle gasket provides watertight, dust-tight

environmental seal (poured polyurethane seamless gasket on

select sizes)

• Clear and opaque cover styles available

• Captive screws provide smooth surfaces

• Latch options - full non-metallic or 300 series stainless steel used on

all external hardware, does not penetrate inside enclosure

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Enclosure can be configured as screw cover or hinged cover

• Thick, robust side wall construction eliminates side wall flexing

• Built in DIN Rail mounting embosses in the back of the enclosure

• Capability to side mount of enclosure panel, DIN or instruments

• Sliding T-Nut allows for infinite panel adjustment back to front

• Multi-directional mounting feet allow mounting flexibility

• Industry leading size range: 6\" x 6\" to 24\" x 24\"

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical and electronic controls and instruments

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

sleet and snow, splashing water, hose directed water,

and sun/UV and flame protection

Standards

• UL/cUL 50 Listed, UL50e, UL508A UL746C, Type 1,

Type 3R, Type 4, Type 4X, Type 12

• Conforms to NEMA Standard for Type 1, Type 3,Type

4X, Type 12

• IEC 60529; IP66

• CSA 22.2, Type 1, Type 3, Type 4X, Type 12

• Temperature Range: -40°F to +248°F (-40°C to +120°C)

• Flammability Rating: UL94-5VA (highest flame resistance)

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back panels (see page 290)

• See accessories (page 294)

Notes: We can provide special modifications. Consult the factory for your special requirements.

Type 4X Non-Metallic

255a

Type 4X Non-Metallic Enclosures

Eaton B-Line series electrical enclosures

Enclosure Catalog # Overall Dimensions Inside Dimensions Mounting

Horz. E x F

Mounting

Vert. E x F

Mounting

H x W x D A x B x C 45° E x F

Clear Cover Opaque Cover in. mm in. mm in. mm in. mm in mm

664-4XPCQRCC 664-4XPCQR 7.41 x 8.68 x 5.84 (188 x 223 x 148) 5.94 x 5.94 x 5.02 (151 x 151 x 127) 3.64 x 8.40 (93 x 213) 8.04 x 3.64 (204 x 93) 6.75 x 6.74 (171 x 171)

864-4XPCQRCC 864-4XPCQR 9.41 x 8.68 x 5.86 (239 x 223 x 149) 7.97 x 5.97 x 5.07 (202 x 152 x 129) 5.64 x 8.04 (143 x 213) 10.04 x 3.64 (255 x 93) 8.76 x 6.75 (223 x 171)

884-4XPCQRCC 884-4XPCQR 9.41 x 10.68 x 5.86 (239 x 271 x 149) 7.97 x 7.97 x 5.03 (202 x 202 x 128) 5.63 x 10.03 (143 x 255) 10.04 x 5.63 (255 x 143) 8.74 x 8.78 (222 x 223)

1084-4XPCQRCC 1084-4XPCQR 11.41 x 10.68 x 6.36 (290 x 271 x 161) 9.96 x 7.96 x 5.57 (253 x 202 x 142) 7.64 x 10.04 (194 x 255) 12.04 x 5.64 (306 x 143) 10.76 x 8.75 (273 x 222)

1086-4XPCQRCC 1086-4XPCQR 11.41 x 10.68 x 7.89 (209 x 271 x 200) 9.95 x 7.95 x 7.06 (253 x 202 x 179) 7.63 x 10.03 (194 x 255) 12.03 x 5.63 (306 x 143) 10.76 x 8.75 (273 x 222)

10106-4XPCQRCC 10106-4XPCQR 11.41 x 12.68 x 6.97 (209 x 322 x 177) 9.95 x 9.95 x 6.15 (253 x 253 x 156) 7.63 x 12.03 (194 x 306) 12.03 x 7.63 (306 x 194) 10.76 x 10.75 (273 x 273)

12106-4XPCQRCC 12106-4XPCQR 13.40 x 12.68 x 7.86 (340 x 322 x 200) 11.95 x 9.95 x 7.07 (304 x 253 x 180) 9.64 x 12.04 (245 x 306) 14.04 x 7.64 (357 x 194) 12.76 x 10.75 (324 x 273)

14126-4XPCQRCC 14126-4XPCQR 15.40 x 14.68 x 7.86 (391 x 373 x 200) 13.95 x 11.95 x 7.07 (354 x 304 x 180) 11.64 x 14.04 (296 x 357) 16.04 x 9.64 (407 x 245) 14.76 x 12.75 (375 x 324)

16148-4XPCQRCC 16148-4XPCQR 17.65 x 16.68 x 9.98 (448 x 424 x 253) 15.93 x 13.93 x 9.20 (405 x 354 x 234) 13.64 x 16.04 (347 x 407) 18.04 x 11.64 (458 x 296) 16.76 x 14.75 (426 x 375)

181610-4XPCQRCC 181610-4XPCQR 19.41 x 18.68 x 11.90 (493 x 474 x 302) 17.83 x 15.83 x 11.08 (453 x 402 x 281) 15.64 x 18.04 (397 x 458) 20.04 x 13.64 (509 x 347) 18.75 x 16.74 (476 x 425)

20168-4XPCQRCC 20168-4XPCQR 21.41 x 18.68 x 9.97 (544 x 474 x 253) 19.86 x 15.86 x 9.15 (504 x 403 x 232) 18.75 x 19.17 (476 x 487) 23.15 x 14.75 (588 x 375) 21.91 x 17.87 (557 x 454)

242410-4XPCQRCC 242410-4XPCQR 25.41 x 26.68 x 11.41 (645 x 678 x 290) 23.91 x 23.91 x 11.88 (607 x 607 x 302) N/A N/A 25.69 x 18.00 (653 x 457) N/A N/A

Enclosure Catalog # Dimensions

J K L M N

Clear Cover Opaque Cover in. mm in. mm in. mm in. mm in. mm Panel No.

664-4XPCQRCC 664-4XPCQR 4.50 (114) 4.25 (108) 4.25 (108) 8.89 (226) 8.89 (226) AW66__

864-4XPCQRCC 864-4XPCQR 4.56 (116) 6.25 (159) 4.25 (108) 10.89 (277) 8.89 (226) AW86__

884-4XPCQRCC 884-4XPCQR 4.53 (115) 6.25 (159) 6.25 (159) 10.88 (277) 10.88 (277) AW88__

1084-4XPCQRCC 1084-4XPCQR 5.05 (128) 8.25 (210) 6.25 (159) 12.89 (327) 10.89 (277) AW108__

1086-4XPCQRCC 1086-4XPCQR 6.54 (166) 8.25 (210) 6.25 (159) 12.88 (327) 10.88 (277) AW108__

10106-4XPCQRCC 10106-4XPCQR 5.65 (144) 8.25 (210) 8.25 (210) 12.88 (327) 12.88 (327) AW1010__

12106-4XPCQRCC 12106-4XPCQR 6.56 (167) 10.25 (260) 8.25 (210) 14.89 (378) 12.89 (327) AW1210__

14126-4XPCQRCC 14126-4XPCQR 6.56 (167) 12.25 (311) 10.25 (260) 16.89 (429) 14.89 (378) AW1412__

16148-4XPCQRCC 16148-4XPCQR 8.68 (220) 14.25 (362) 12.25 (311) 18.89 (480) 16.89 (429) AW1614__

181610-4XPCQRCC 181610-4XPCQR 10.56 (268) 16.25 (413) 14.25 (362) 20.89 (531) 18.89 (480) AW1816__

20168-4XPCQRCC 20168-4XPCQR 8.65 (220) 18.25 (464) 14.25 (362) 24.00 (610) 20.02 (509) AW2016__J

242410-4XPCQRCC 242410-4XPCQR 10.56 (268) 22.25 (565) 22.25 (565) 26.69 (678) 21.86 (555) AW2424__J

Polycarbonate Enclosures

Type 4X Hinge and Lift-Off Screw Cover

Illustration Sheet and Catalog Number

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Type 4X Non-Metallic

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

255b B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

SECTION B-B

A A

M H

SECTION A-A

B W

Section A-A

Section B-B

JIC Fiberglass Enclosures

Type 4X Lift-Off Screw Cover

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Captive screws provide smooth surfaces

• 300 series stainless steel used on all external hardware

• Molded in flange for ease of mounting

• Stainless steel beaded chain for securing cover after lift off

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical and electronic controls and

instruments

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, hose directed water, and prolonged

submersion

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 4X, Type 6P,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3,

Type 4X, Type 6P, Type 12

• CSA 22.2, Type 1, Type 3, Type 4X, Type 6P, Type 12

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back Panels (see page 290)

• See accessories (pages 292 - 294)

Notes: We can provide special modifications. Consult the factory for your special requirements.

Type 4X Non-Metallic

256

Type 4X Non-Metallic Enclosures

Eaton B-Line series electrical enclosures

Enclosure Overall Dimensions Inside Dimensions

Catalog # H x W x D A x B x C E F Hole Dia. Panel No. in. mm in. mm in. mm in. mm in. mm

644-4XFLC 7.50 x 5.43 x 4.75 191 x 138 x 121 5.84 x 3.85 x 4.45 148 x 98 x 113 6.75 171 2.00 51 0.31 8 AW64__

664-4XFLC 7.50 x 7.50 x 4.75 191 x 191 x 121 5.72 x 5.72 x 4.45 145 x 145 x 113 6.75 171 4.00 101 0.31 8 AW66__

864-4XFLC 9.62 x 7.50 x 4.74 244 x 191 x 121 7.73 x 5.74 x 4.45 196 x 146 x 113 8.88 225 4.00 101 0.31 8 AW86__

884-4XFLC 9.56 x 9.38 x 4.89 243 x 238 x 124 7.73 x 7.73 x 4.64 196 x 196 x 118 8.75 222 6.00 152 0.31 8 AW88__

1084-4XFLC 11.62 x 9.41 x 4.25 295 x 239 x 108 9.73 x 7.73 x 3.98 247 x 196 x 101 10.75 273 6.00 152 0.31 8 AW108__

* 1085-4XFLC 11.62 x 9.37 x 5.06 295 x 238 x 129 9.73 x 7.73 x 4.83 247 x 196 x 123 10.75 273 6.00 152 0.31 8 AW108__

12105-4XFLC 13.56 x 11.43 x 5.21 344 x 291 x 132 11.79 x 9.80 x 4.94 299 x 249 x 125 12.75 324 8.00 203 0.31 8 AW1210__

12126-4XFLC 13.56 x 13.38 x 6.36 344 x 340 x 161 11.70 x 11.70 x 6.11 297 x 297 x 155 12.75 324 10.00 254 0.31 8 AW1212__

1476-4XFLC 15.87 x 8.75 x 6.81 403 x 222 x 173 14.00 x 7.00 x 6.56 356 x 178 x 167 15.00 381 5.00 127 0.31 8 AW147__

14126-4XFLC 15.50 x 13.50 x 6.25 394 x 343 x 159 13.53 x 11.55 x 5.94 344 x 293 x 151 14.62 371 10.00 254 0.31 8 AW1412__

16146-4XFLC 17.53 x 15.46 x 6.23 445 x 393 x 158 15.63 x 13.60 x 5.94 397 x 345 x 151 16.75 425 12.00 305 0.31 8 AW1614__

18168-4XFLC 19.62 x 17.61 x 8.82 498 x 447 x 224 17.69 x 15.69 x 8.45 449 x 399 x 215 18.88 479 12.00 305 0.31 8 AW1816__

20168-4XFLC 22.00 x 17.68 x 8.83 559 x 449 x 224 19.72 x 15.72 x 8.45 501 x 399 x 215 21.25 540 10.00 254 0.31 8 AW2016__J

Enclosure Dimensions

Catalog # J K L M N

in. mm in. mm in. mm in. mm in. mm

644-4XFLC 4.00 101 4.25 108 2.25 57 0.25 6 7.39 188

664-4XFLC 4.00 101 4.25 108 4.25 108 0.25 6 7.52 191

864-4XFLC 4.00 101 6.25 159 4.25 108 0.25 6 9.50 242

884-4XFLC 4.06 103 6.25 159 6.25 159 0.25 6 9.37 238

1084-4XFLC 3.50 89 8.25 209 6.25 159 0.25 6 11.35 288

* 1085-4XFLC 4.37 111 8.25 209 6.25 159 0.25 6 11.37 289

12105-4XFLC 4.50 114 10.25 260 8.25 209 0.25 6 13.41 341

12126-4XFLC 5.53 140 10.25 260 10.25 260 0.25 6 13.38 340

1476-4XFLC 6.12 156 12.25 311 5.25 133 0.25 6 15.75 400

14126-4XFLC 5.37 137 12.25 311 10.25 260 0.25 6 15.47 393

16146-4XFLC 5.36 136 14.25 362 12.25 311 0.25 6 17.45 443

18168-4XFLC 7.99 203 16.25 413 14.25 362 0.25 6 19.61 498

20168-4XFLC 8.00 203 18.25 464 14.25 362 0.25 6 21.68 551

JIC Fiberglass Enclosures

Type 4X Lift-Off Screw Cover

Illustration Sheet and Catalog Number

Section Y-Y

Section X-X Front View

Front View

Without Cover

Back Panel

(see page 290)

Y A E H

hole dia.

4 places

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Type 4X Non-Metallic

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

* Crowned Cover

257 B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Hinged Screw Cover

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Captive screws provide smooth surfaces

• 300 series stainless steel used on all external hardware

• Integral flange molded in place for ease of mounting

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full length stainless steel hinged cover

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical and electronic controls and

instruments

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, hose directed water, and prolonged

submersion

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 4X, Type 6P,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3,

Type 4X, Type 6P, Type 12

• CSA 22.2, Type 1, Type 3, Type 4X, Type 6P, Type 12

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back Panels (see page 290)

• See accessories (pages 292 - 294) Type 4X Non-Metallic

Notes: We can provide special modifications. Consult the factory for your special requirements.

258 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Hinged Screw Cover

Illustration Sheet and Catalog Number

Type 4X Non-Metallic

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X Front View

Front View

Without Cover

Back Panel

(see page 290)

Y A E H

hole dia.

4 places

* Crowned Cover

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

259

Enclosure Overall Dimensions Inside Dimensions

Catalog # H x W x D A x B x C E F Hole Dia. Panel No. in. mm in. mm in. mm in. mm in. mm

644-4XFCHSC 7.50 x 5.43 x 4.75 191 x 138 x 121 5.84 x 3.85 x 4.45 148 x 98 x 113 6.75 171 2.00 51 0.31 8 AW64__

664-4XFCHSC 7.50 x 7.50 x 4.75 191 x 191 x 121 5.72 x 5.72 x 4.45 145 x 145 x 113 6.75 171 4.00 101 0.31 8 AW66__

864-4XFCHSC 9.62 x 7.50 x 4.74 244 x 191 x 121 7.73 x 5.74 x 4.45 196 x 146 x 113 8.88 225 4.00 101 0.31 8 AW86__

884-4XFCHSC 9.56 x 9.38 x 4.89 243 x 238 x 124 7.73 x 7.73 x 4.64 196 x 196 x 119 8.75 222 6.00 152 0.31 8 AW88__

1084-4XFCHSC 11.62 x 9.41 x 4.25 295 x 239 x 108 9.73 x 7.73 x 3.98 247 x 196 x 101 10.75 273 6.00 152 0.31 8 AW108__

* 1085-4XFCHSC 11.62 x 9.37 x 5.06 295 x 238 x 129 9.73 x 7.73 x 4.83 247 x 196 x 123 10.75 273 6.00 152 0.31 8 AW108__

12105-4XFCHSC 13.56 x 11.43 x 5.21 344 x 291 x 132 11.79 x 9.80 x 4.94 299 x 249 x 125 12.75 324 8.00 203 0.31 8 AW1210__

12126-4XFCHSC 13.56 x 13.38 x 6.36 344 x 340 x 161 11.70 x 11.70 x 6.11 297 x 297 x 155 12.75 324 10.00 254 0.31 8 AW1212__

1476-4XFCHSC 15.87 x 8.75 x 6.81 403 x 222 x 173 14.00 x 7.00 x 6.56 356 x 178 x 167 15.00 381 5.00 127 0.31 8 AW147__

14126-4XFCHSC 15.50 x 13.50 x 6.25 394 x 343 x 159 13.53 x 11.55 x 5.94 344 x 293 x 151 14.62 371 10.00 254 0.31 8 AW1412__

16146-4XFCHSC 17.53 x 15.46 x 6.23 445 x 393 x 158 15.63 x 13.60 x 5.94 397 x 345 x 151 16.75 425 12.00 305 0.31 8 AW1614__

18168-4XFCHSC 19.62 x 17.61 x 8.82 498 x 447 x 224 17.69 x 15.69 x 8.45 449 x 399 x 215 18.88 479 12.00 305 0.31 8 AW1816__

20168-4XFCHSC 22.00 x 17.68 x 8.83 559 x 449 x 224 19.72 x 15.72 x 8.45 501 x 399 x 215 21.25 540 10.00 254 0.31 8 AW2016__J

Enclosure Dimensions

Catalog # J K L M N

in. mm in. mm in. mm in. mm in. mm

644-4XFCHSC 4.00 101 4.25 108 2.25 57 0.25 6 7.39 188

664-4XFCHSC 4.00 101 4.25 108 4.25 108 0.25 6 7.52 191

864-4XFCHSC 4.00 101 6.25 159 4.25 108 0.25 6 9.50 242

884-4XFCHSC 4.06 103 6.25 159 6.25 159 0.25 6 9.37 238

1084-4XFCHSC 3.50 89 8.25 209 6.25 159 0.25 6 11.35 288

* 1085-4XFCHSC 4.37 111 8.25 209 6.25 159 0.25 6 11.37 289

12105-4XFCHSC 4.50 114 10.25 260 8.25 209 0.25 6 13.41 341

12126-4XFCHSC 5.53 140 10.25 260 10.25 260 0.25 6 13.38 340

1476-4XFCHSC 6.12 156 12.25 311 5.25 133 0.25 6 15.75 400

14126-4XFCHSC 5.37 137 12.25 311 10.25 260 0.25 6 15.47 393

16146-4XFCHSC 5.36 136 14.25 362 12.25 311 0.25 6 17.45 443

18168-4XFCHSC 7.99 203 16.25 413 14.25 362 0.25 6 19.61 498

20168-4XFCHSC 8.00 203 18.25 464 14.25 362 0.25 6 21.68 551

B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Hinged Quick-Release Cover

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Captive screws provide smooth surfaces

• 300 series stainless steel used on all external hardware

• Integral flange molded in place for ease of mounting

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full length stainless steel hinged cover

• Padlocking latches provide quick access and optional closure

locking (padlock not included)

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical and electronic controls and

instruments

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, hose directed water, and prolonged

submersion

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 4X, Type 6P,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3,

Type 4X, Type 6P, Type 12

• CSA 22.2, Type 1, Type 3, Type 4X, Type 6P, Type 12

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back Panels (see page 290)

• See accessories (pages 292 - 294) Type 4X Non-Metallic

Notes: We can provide special modifications. Consult the factory for your special requirements.

260 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Hinged Quick-Release Cover

Illustration Sheet and Catalog Number

Enclosure Overall Dimensions Inside Dimensions

Catalog # H x W x D A x B x C E F Hole Dia. Panel No.

in. mm in. mm in. mm in. mm in. mm

644-4XFCHQRC 7.50 x 5.43 x 4.75 191 x 138 x 121 5.84 x 3.85 x 4.45 148 x 98 x 113 6.75 171 2.00 51 0.31 8 AW64__

664-4XFCHQRC 7.50 x 7.50 x 4.75 191 x 191 x 121 5.72 x 5.72 x 4.45 145 x 145 x 113 6.75 171 4.00 101 0.31 8 AW66__

864-4XFCHQRC 9.62 x 7.50 x 4.74 244 x 191 x 121 7.73 x 5.74 x 4.45 196 x 146 x 113 8.88 225 4.00 101 0.31 8 AW86__

884-4XFCHQRC 9.56 x 9.38 x 4.87 243 x 238 x 123 7.73 x 7.73 x 4.62 196 x 196 x 117 8.75 222 6.00 152 0.31 8 AW88__

1084-4XFCHQRC 11.62 x 9.41 x 4.25 295 x 239 x 108 9.73 x 7.73 x 3.98 247 x 196 x 101 10.75 273 6.00 152 0.31 8 AW108__

* 1085-4XFCHQRC 11.62 x 9.37 x 5.06 295 x 238 x 129 9.73 x 7.73 x 4.83 247 x 196 x 123 10.75 273 6.00 152 0.31 8 AW108__

12105-4XFCHQRC 13.56 x 11.43 x 5.21 344 x 291 x 132 11.79 x 9.80 x 4.94 299 x 249 x 125 12.75 324 8.00 203 0.31 8 AW1210__

12126-4XFCHQRC 13.56 x 13.38 x 6.36 344 x 340 x 161 11.70 x 11.70 x 6.11 297 x 297 x 155 12.75 324 10.00 254 0.31 8 AW1212__

1476-4XFCHQRC 15.87 x 8.75 x 6.81 403 x 222 x 173 14.00 x 7.00 x 6.56 356 x 178 x 167 15.00 381 5.00 127 0.31 8 AW147__

14126-4XFCHQRC 15.50 x 13.50 x 6.25 394 x 343 x 159 13.53 x 11.55 x 5.94 344 x 293 x 151 14.62 371 10.00 254 0.31 8 AW1412__

16146-4XFCHQRC 17.53 x 15.46 x 6.23 445 x 393 x 158 15.63 x 13.60 x 5.94 397 x 345 x 151 16.75 425 12.00 305 0.31 8 AW1614__

18168-4XFCHQRC 19.62 x 17.61 x 8.82 498 x 447 x 224 17.69 x 15.69 x 8.45 449 x 399 x 215 18.88 479 12.00 305 0.31 8 AW1816__

20168-4XFCHQRC 22.00 x 17.68 x 8.83 559 x 449 x 224 19.72 x 15.72 x 8.45 501 x 399 x 215 21.25 540 10.00 254 0.31 8 AW2016__J

Enclosure Dimensions

Catalog # J K L M N

in. mm in. mm in. mm in. mm in. mm

644-4XFCHQRC 4.00 101 4.25 108 2.25 57 0.25 6 7.39 188

664-4XFCHQRC 4.00 101 4.25 108 4.25 108 0.25 6 7.52 191

864-4XFCHQRC 4.00 101 6.25 159 4.25 108 0.25 6 9.50 242

884-4XFCHQRC 3.98 101 6.25 159 6.25 159 0.25 6 9.38 238

1084-4XFCHQRC 3.50 89 8.25 209 6.25 159 0.25 6 11.35 288

* 1085-4XFCHQRC 4.37 111 8.25 209 6.25 159 0.25 6 11.37 289

12105-4XFCHQRC 4.50 114 10.25 260 8.25 209 0.25 6 13.41 341

12126-4XFCHQRC 5.53 140 10.25 260 10.25 260 0.25 6 13.38 340

1476-4XFCHQRC 6.12 156 12.25 311 5.25 133 0.25 6 15.75 400

14126-4XFCHQRC 5.37 137 12.25 311 10.25 260 0.25 6 15.47 393

16146-4XFCHQRC 5.36 136 14.25 362 12.25 311 0.25 6 17.45 443

18168-4XFCHQRC 7.99 203 16.25 413 14.25 362 0.25 6 19.61 498

20168-4XFCHQRC 8.00 203 18.25 464 14.25 362 0.25 6 21.68 551

Type 4X Non-Metallic

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X Front View

Front View

Without Cover

Back Panel

(see page 290)

Y A E H

hole dia.

4 places

* Crowned Cover

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

261 B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Hinged Quick-Release Window Cover

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Captive screws provide smooth surfaces

• 300 series stainless steel used on all external hardware

• Integral flange molded in place for ease of mounting

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full length stainless steel hinged cover

• Padlocking latches provide quick access and optional closure locking

(padlock not included)

• Window utilizes a scratch resistant UVA acrylic material to provide

internal component visibility

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical and electronic controls and

instruments

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, hose directed water, and prolonged

submersion

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 4X, Type 6P,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3,

Type 4X, Type 6P, Type 12

• CSA 22.2, Type 1, Type 3, Type 4X, Type 6P, Type 12

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back Panels (see page 290)

• See accessories (pages 292 - 294) Type 4X Non-Metallic

Notes: We can provide special modifications. Consult the factory for your special requirements.

262 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Hinged Quick-Release Window Cover

Illustration Sheet and Catalog Number

Enclosure Overall Dimensions Inside Dimensions Window Area Mtg. Dimension

Catalog # H x W x D A x B x C (Maximum) E F Panel No.

in. mm in. mm in. mm in. mm in. mm

644-4XFCHQRCW 7.50 x 5.43 x 4.75 191 x 138 x 121 5.84 x 3.85 x 4.45 148 x 98 x 113 4.25 x 2.25 108 x 57 6.75 171 2.00 51 AW64__

664-4XFCHQRCW 7.50 x 7.50 x 4.75 191 x 191 x 121 5.72 x 5.72 x 4.45 145 x 145 x 113 4.25 x 4.25 108 x 108 6.75 171 4.00 101 AW66__

864-4XFCHQRCW 9.62 x 7.50 x 4.74 244 x 191 x 121 7.73 x 5.74 x 4.45 196 x 146 x 113 6.25 x 4.25 159 x 108 8.88 225 4.00 101 AW86__

1084-4XFCHQRCW 11.62 x 9.41 x 4.25 295 x 239 x 108 9.73 x 7.73 x 3.98 247 x 196 x 101 8.25 x 6.25 210 x 159 10.75 273 6.00 152 AW108__

* 1085-4XFCHQRCW 11.62 x 9.37 x 5.06 295 x 238 x 129 9.73 x 7.73 x 4.83 247 x 196 x 123 8.25 x 6.25 210 x 159 10.75 273 6.00 152 AW108__

12105-4XFCHQRCW 13.56 x 11.43 x 5.21 344 x 291 x 132 11.79 x 9.80 x 4.94 299 x 249 x 125 10.25 x 8.25 260 x 210 12.75 324 8.00 203 AW1210__

1476-4XFCHQRCW 15.87 x 8.75 x 6.81 403 x 222 x 173 14.00 x 7.00 x 6.56 356 x 178 x 167 12.75 x 5.75 324 x 146 15.00 381 5.00 127 AW147__

14126-4XFCHQRCW 15.50 x 13.50 x 6.25 394 x 343 x 159 13.53 x 11.55 x 5.94 344 x 293 x 151 12.25 x 10.25 311 x 260 14.62 371 10.00 254 AW1412__

16146-4XFCHQRCW 17.53 x 15.46 x 6.23 445 x 393 x 158 15.63 x 13.60 x 5.94 397 x 345 x 151 14.25 x 12.25 362 x 311 16.75 425 12.00 305 AW1614__

18168-4XFCHQRCW 19.62 x 17.61 x 8.82 498 x 447 x 224 17.69 x 15.69 x 8.45 449 x 399 x 215 16.25 x 14.25 413 x 362 18.88 479 12.00 305 AW1816__

20168-4XFCHQRCW 22.00 x 17.68 x 8.83 559 x 449 x 224 19.72 x 15.72 x 8.45 501 x 399 x 215 18.25 x 14.25 464 x 362 21.25 540 10.00 254 AW2016__J

Enclosure Dimensions

Catalog # Hole Dia. J K L M N

in. mm in. mm in. mm in. mm in. mm in. mm

644-4XFCHQRCW 0.31 8 4.00 101 4.25 108 2.25 57 0.25 6 7.39 188

664-4XFCHQRCW 0.31 8 4.00 101 4.25 108 4.25 108 0.25 6 7.52 191

864-4XFCHQRCW 0.31 8 4.00 101 6.25 159 4.25 108 0.25 6 9.50 242

1084-4XFCHQRCW 0.31 8 3.50 89 8.25 209 6.25 159 0.25 6 11.35 288

* 1085-4XFCHQRCW 0.31 8 4.37 111 8.25 209 6.25 159 0.25 6 11.37 289

12105-4XFCHQRCW 0.31 8 4.50 114 10.25 260 8.25 209 0.25 6 13.41 341

1476-4XFCHQRCW 0.31 8 6.12 156 12.25 311 5.25 133 0.25 6 15.75 400

14126-4XFCHQRCW 0.31 8 5.37 137 12.25 311 10.25 260 0.25 6 15.47 393

16146-4XFCHQRCW 0.31 8 5.36 136 14.25 362 12.25 311 0.25 6 17.45 443

18168-4XFCHQRCW 0.31 8 7.99 203 16.25 413 14.25 362 0.25 6 19.61 498

20168-4XFCHQRCW 0.31 8 8.00 203 18.25 464 14.25 362 0.25 6 21.68 551

Type 4X Non-Metallic

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X Front View

Front View

Without Cover

Back Panel

(see page 290)

Y A E H

hole dia.

4 places

* Crowned Cover

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

263 B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Premier™ Series Hinged Screw Cover

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Captive screws provide smooth surfaces

• 300 series stainless steel used on all external hardware

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full 180° door opening

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical and electronic controls and

instruments

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, and hose directed water

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 3s, Type 4X,

Type 12, Type 13

• Conforms to NEMA Standard for Type 1, Type 3,

Type 3s, Type 4X, Type 12, Type 13

• CSA 22.2, Type 1, Type 3, Type 3s, Type 4X, Type 12,

Type 13

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-halogenated, Non-flame

propagating

• Chemical Resistance: (see chart, pages 464 - 467)

• NFPA No. 101 Flame Spread, Class A (1)

Finish

• Gray color

Accessories

• Back Panels (see page 290)

• Mounting Foot kits (see page 294)

• See accessories (pages 292 - 294) Type 4X Non-Metallic

Notes: We can provide special modifications. Consult the factory for your special requirements.

264 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Premier™ Series Hinged Screw Cover

Illustration Sheet and Catalog Number

Enclosure Overall Dimensions Inside Dimensions Mtg. Dimension Optional Feet Mtg.

Catalog # H x W x D A x B x C P x R E x F Panel No.

in. mm in. mm in. mm in. mm

664-SDF 7.41x7.79x4.31 188x198x109 6.77x6.77x4.06 172x172x103 5.93x4.00 150x101 8.24x4.00 209x101 AW66__

864-SDF 9.41x7.79x4.31 239x198x109 8.77x6.77x4.06 228x172x103 7.91x4.00 201x101 10.21x4.00 259x101 AW86__

884-SDF 9.39x9.76x4.31 238x248x109 8.74x8.74x4.06 222x222x103 7.91x6.00 201x152 10.21x6.00 259x152 AW88__

1086-SDF 11.42x9.79x6.31 290x248x160 10.73x8.73x6.06 272x222x154 9.89x6.00 251x152 12.19x6.00 309x152 AW108__

12106-SDF 13.45x11.83x6.31 341x300x160 12.69x10.69x6.06 322x271x154 11.88x8.00 302x203 14.18x8.00 360x203 AW1210__

14126-SDF 15.49x13.86x6.34 393x352x161 14.72x12.72x6.06 374x323x154 13.91x10.00 353x254 16.21x10.00 412x254 AW1412__

14128-SDF 15.49x13.86x8.34 393x352x212 14.66x12.66x8.06 372x321x205 13.88x10.00 352x254 16.19x10.00 411x254 AW1412__

16148-SDF 17.58x15.96x8.34 446x405x212 16.69x14.69x8.06 424x373x205 15.96x12.00 405x205 18.26x12.00 464x305 AW1614__

181610-SDF 19.77x18.15x10.34 502x461x262 18.63x16.63x10.06 473x422x255 17.94x14.00 455x355 20.24x14.00 514x355 AW1816__

201610-SDF 21.79x18.16x10.34 553x461x262 20.63x16.63x10.06 524x422x255 19.96x14.00 507x355 22.26x14.00 565x355 AW2016__J

Enclosure Dimensions

Catalog # K L S T N J M

in. mm in. mm in. mm in. mm in. mm in. mm in. mm

664-SDF 4.25 108 4.25 108 3.60 91 0.38 9.6 9.02 229 4.56 116 0.25 6.35

864-SDF 6.25 159 4.25 108 3.60 91 0.38 9.6 10.98 279 4.56 116 0.25 6.35

884-SDF 6.25 159 6.25 159 3.60 91 0.38 9.6 10.98 279 4.56 116 0.25 6.35

1086-SDF 8.25 210 6.25 159 5.60 142 0.38 9.6 12.96 329 6.56 167 0.25 6.35

12106-SDF 10.25 260 8.25 210 5.60 142 0.38 9.6 14.95 380 6.56 167 0.25 6.35

14126-SDF 12.25 311 10.25 260 5.60 142 0.38 9.6 16.98 431 6.59 167 0.25 6.35

14128-SDF 12.25 311 10.25 260 7.60 193 0.38 9.6 16.96 431 8.59 218 0.25 6.35

16148-SDF 14.25 362 12.25 311 7.60 193 0.38 9.6 19.04 483 8.59 218 0.25 6.35

181610-SDF 16.25 413 14.25 362 9.60 244 0.38 9.6 21.02 534 10.59 269 0.25 6.35

201610-SDF 18.25 463 14.25 362 9.59 244 0.38 9.6 23.04 585 10.59 269 0.25 6.35

Type 4X Non-Metallic

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X

Front View

D J

#10-32 tap

4 holes

#10-32 tap

4 holes

#10-32 tap

4 holes

optional MT6 foot

.50 x .31 slot

4 places

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

265 B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Premier™ Series Hinged Quick-Release Cover

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Captive screws provide smooth surfaces

• 300 series stainless steel used on all external hardware

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full 180° door opening

• Padlocking latches provide quick access and optional closure

locking (padlock not included)

• Flush mounted scratch and abrasion resistant polycarbonate clear

cover option provides internal component visibility

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical and electronic controls and

instruments

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, and hose directed water

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 3s, Type 4X,

Type 12, Type 13

• Conforms to NEMA Standard for Type 1, Type 3,

Type 3s, Type 4X, Type 12, Type 13

• CSA 22.2, Type 1, Type 3, Type 3s, Type 4X, Type 12,

Type 13

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Window Flammability Rating: UL94V-0

• Self Extinguishing: Non-halogenated, Non-flame

propagating

• Chemical Resistance: (see chart, pages 464 - 467)

• NFPA No. 101 Flame Spread, Class A (1)

Finish

• Gray color

Accessories

• Back Panels (see page 290)

• Mounting Foot kits (see page 294)

• See accessories (pages 292 - 294)

Type 4X Non-Metallic

Notes: We can provide special modifications. Consult the factory for your special requirements.

266 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Premier™ Series Hinged Quick-Release Cover

Illustration Sheet and Catalog Number

Type 4X Non-Metallic

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X

Front View

D J

#10-32 tap

4 holes

#10-32 tap

4 holes

#10-32 tap

4 holes

0ptional MT6 foot

.50 x .31 slot

4 places

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

267

Enclosure Overall Dimensions Inside Dimensions Mtg. Dimension Optional Feet Mtg.

Catalog # H x W x D A x B x C P x R E x F Panel No.

in. mm in. mm in. mm in. mm

664-SDFQR 7.41 x 7.79 x 4.31 188 x 198 x 109 6.77 x 6.77 x 4.06 172 x 172 x 103 5.93 x 4.00 150 x 101 8.24 x 4.00 209 x 101 AW66__

864-SDFQR 9.41 x 7.79 x 4.31 239 x 198 x 109 8.77 x 6.77 x 4.06 228 x 172 x 103 7.91 x 4.00 201 x 101 10.21 x 4.00 259 x 101 AW86__

884-SDFQR 9.39 x 9.76 x 4.31 238 x 248 x 109 8.74 x 8.74 x 4.06 222 x 222 x 103 7.91 x 6.00 201 x 152 10.21 x 6.00 259 x 152 AW88__

1086-SDFQR 11.42 x 9.79 x 6.31 290 x 248 x 160 10.73 x 8.73 x 6.06 272 x 222 x 154 9.89 x 6.00 251 x 152 12.19 x 6.00 309 x 152 AW108__

12106-SDFQR 13.45 x 11.83 x 6.31 341 x 300 x 160 12.69 x 10.69 x 6.06 322 x 271 x 154 11.88 x 8.00 302 x 203 14.18 x 8.00 360 x 203 AW1210__

14126-SDFQR 15.49 x 13.86 x 6.34 393 x 352 x 161 14.72 x 12.72 x 6.06 374 x 323 x 154 13.91 x 10.00 353 x 254 16.21 x 10.00 412 x 254 AW1412__

14128-SDFQR 15.49 x 13.86 x 8.34 393 x 352 x 212 14.66 x 12.66 x 8.06 372 x 321 x 205 13.88 x 10.00 352 x 254 16.19 x 10.00 411 x 254 AW1412__

16148-SDFQR 17.58 x 15.96 x 8.34 446 x 405 x 212 16.69 x 14.69 x 8.06 424 x 373 x 205 15.96 x 12.00 405 x 205 18.26 x 12.00 464 x 305 AW1614__

181610-SDFQR 19.77 x 18.15 x 10.34 502 x 461 x 262 18.63 x 16.63 x 10.06 473x x 422 x 255 17.94 x 14.00 455 x 355 20.24 x 14.00 514 x 355 AW1816__

201610-SDFQR 21.79 x 18.16 x 10.34 553 x 461 x 262 20.63 x 16.63 x 10.06 524 x 422 x 255 19.96 x 14.00 507 x 355 22.26 x 14.00 565 x 355 AW2016__J

Enclosure Dimensions

Catalog # K L S T N J M

in. mm in. mm in. mm in. mm in. mm in. mm in. mm

664-SDFQR 4.25 108 4.25 108 3.60 91 0.38 9.6 9.02 229 4.56 116 0.25 6.35

864-SDFQR 6.25 159 4.25 108 3.60 91 0.38 9.6 10.98 279 4.56 116 0.25 6.35

884-SDFQR 6.25 159 6.25 159 3.60 91 0.38 9.6 10.98 279 4.56 116 0.25 6.35

1086-SDFQR 8.25 210 6.25 159 5.60 142 0.38 9.6 12.96 329 6.56 167 0.25 6.35

12106-SDFQR 10.25 260 8.25 210 5.60 142 0.38 9.6 14.95 380 6.56 167 0.25 6.35

14126-SDFQR 12.25 311 10.25 260 5.60 142 0.38 9.6 16.98 431 6.59 167 0.25 6.35

14128-SDFQR 12.25 311 10.25 260 7.60 193 0.38 9.6 16.96 431 8.59 218 0.25 6.35

16148-SDFQR 14.25 362 12.25 311 7.60 193 0.38 9.6 19.04 483 8.59 218 0.25 6.35

181610-SDFQR 16.25 413 14.25 362 9.60 244 0.38 9.6 21.02 534 10.59 269 0.25 6.35

201610-SDFQR 18.25 463 14.25 362 9.59 244 0.38 9.6 23.04 585 10.59 269 0.25 6.35

B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Premier™ Series Hinged Quick-Release Clear Cover

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Captive screws provide smooth surfaces

• 300 series stainless steel used on all external hardware

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full 180° door opening

• Padlocking latches provide quick access and optional closure

locking (padlock not included)

• Flush mounted scratch and abrasion resistant polycarbonate clear

cover option provides internal component visibility

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical and electronic controls and

instruments

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, and hose directed water

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 3s, Type 4X,

Type 12, Type 13

• Conforms to NEMA Standard for Type 1, Type 3,

Type 3s, Type 4X, Type 12, Type 13

• CSA 22.2, Type 1, Type 3, Type 3s, Type 4X, Type 12,

Type 13

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Window Flammability Rating: UL94V-0

• Self Extinguishing: Non-halogenated, Non-flame

propagating

• Chemical Resistance: (see chart, pages 464 - 467)

• NFPA No. 101 Flame Spread, Class A (1)

Finish

• Gray color

Accessories

• Back Panels (see page 290)

• Mounting Foot kits (see page 294)

• See accessories (pages 292 - 294)

Type 4X Non-Metallic

Notes: We can provide special modifications. Consult the factory for your special requirements.

268 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Premier™ Series Hinged Quick-Release Clear Cover

Illustration Sheet and Catalog Number

Type 4X Non-Metallic

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X

Front View

D J

#10-32 tap

4 holes

#10-32 tap

4 holes

#10-32 tap

4 holes

optional MT6 foot

.50 x .31 slot

4 places

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

269

Enclosure Overall Dimensions Inside Dimensions Mtg. Dimension Optional Feet Mtg.

Catalog # H x W x D A x B x C P x R E x F Panel No.

in. mm in. mm in. mm in. mm

664-SDFQRCC 7.41 x 7.79 x 4.31 188 x 198 x 109 6.77 x 6.77 x 4.06 172 x 172 x 103 5.93 x 4.00 150 x 101 8.24 x 4.00 209 x 101 AW66__

864-SDFQRCC 9.41 x 7.79 x 4.31 239 x 198 x 109 8.77 x 6.77 x 4.06 228 x 172 x 103 7.91 x 4.00 201 x 101 10.21 x 4.00 259 x 101 AW86__

884-SDFQRCC 9.39 x 9.76 x 4.31 238 x 248 x 109 8.74 x 8.74 x 4.06 222 x 222 x 103 7.91 x 6.00 201 x 152 10.21 x 6.00 259 x 152 AW88__

1086-SDFQRCC 11.42 x 9.79 x 6.31 290 x 248 x 160 10.73 x 8.73 x 6.06 272 x 222 x 154 9.89 x 6.00 251 x 152 12.19 x 6.00 309 x 152 AW108__

12106-SDFQRCC 13.45 x 11.83 x 6.31 341 x 300 x 160 12.69 x 10.69 x 6.06 322 x 271 x 154 11.88 x 8.00 302 x 203 14.18 x 8.00 360 x 203 AW1210__

14126-SDFQRCC 15.49 x 13.86 x 6.34 393 x 352 x 161 14.72 x 12.72 x 6.06 374 x 323 x 154 13.91 x 10.00 353 x 254 16.21 x 10.00 412 x 254 AW1412__

14128-SDFQRCC 15.49 x 13.86 x 8.34 393 x 352 x 212 14.66 x 12.66 x 8.06 372 x 321 x 205 13.88 x 10.00 352 x 254 16.19 x 10.00 411 x 254 AW1412__

16148-SDFQRCC 17.58 x 15.96 x 8.34 446 x 405 x 212 16.69 x 14.69 x 8.06 424 x 373 x 205 15.96 x 12.00 405 x 205 18.26 x 12.00 464 x 305 AW1614__

Enclosure Dimensions

Catalog # K L S T N J M

in. mm in. mm in. mm in. mm in. mm in. mm in. mm

664-SDFQRCC 4.25 108 4.25 108 3.60 91 0.38 9.6 9.02 229 4.56 116 0.25 6.35

864-SDFQRCC 6.25 159 4.25 108 3.60 91 0.38 9.6 10.98 279 4.56 116 0.25 6.35

884-SDFQRCC 6.25 159 6.25 159 3.60 91 0.38 9.6 10.98 279 4.56 116 0.25 6.35

1086-SDFQRCC 8.25 210 6.25 159 5.60 142 0.38 9.6 12.96 329 6.56 167 0.25 6.35

12106-SDFQRCC 10.25 260 8.25 210 5.60 142 0.38 9.6 14.95 380 6.56 167 0.25 6.35

14126-SDFQRCC 12.25 311 10.25 260 5.60 142 0.38 9.6 16.98 431 6.59 167 0.25 6.35

14128-SDFQRCC 12.25 311 10.25 260 7.60 193 0.38 9.6 16.96 431 8.59 218 0.25 6.35

16148-SDFQRCC 14.25 362 12.25 311 7.60 193 0.38 9.6 19.04 483 8.59 218 0.25 6.35

B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Small Junction

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Recessed captive screws provide smooth surfaces

• 300 series stainless steel used on all external hardware

• Rounded edges reduce build-up of dust and debris

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical and electronic controls and

instruments

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, hose directed water, and prolonged

submersion

Standards

• UL/cUL 50 Listed, Type 1, Type 3R, Type 4X, Type 6P,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3R,

Type 4X, Type 6P, Type 12

• CSA 22.2, Type 1, Type 3R, Type 4X, Type 6P, Type 12

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Mounting Foot kits (see page 294)

• See accessories (pages 292 - 294) Type 4X Non-Metallic

Notes: We can provide special modifications. Consult the factory for your special requirements.

270 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Small Junction

Illustration Sheet and Catalog Number

Enclosure Overall Dimensions Inside Dimensions Dimensions

Catalog #

H x W x D A x B x C I J K L M N in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

332-4XFSC 3.72 x 3.63 x 2.95 95 x 92 x 75 3.13 x 3.03 x 2.70 79 x 77 x 69 3.22 82 2.12 54 2.31 59 2.75 70 1.59 40 2.03 52

532-4XFSC 5.97 x 3.63 x 3.14 152 x 92 x 80 5.38 x 3.03 x 2.87 137 x 77 x 73 5.72 120 2.38 61 4.56 116 2.75 70 3.84 98 2.03 52

644-4XFSC 6.63 x 3.81 x 3.89 168 x 97 x 99 6.00 x 3.19 x 3.63 153 x 81 x 92 5.31 135 2.50 64 4.88 124 2.94 75 4.13 105 2.19 56

832-4XFSC 8.41 x 3.63 x 3.14 214 x 92 x 80 7.82 x 3.03 x 2.87 199 x 77 x 73 7.16 182 2.38 60 7.00 178 2.75 70 6.28 160 2.03 52

844-4XFSC 8.41 x 3.63 x 3.14 225 x 97 x 99 8.26 x 3.19 x 3.63 210 x 81 x 92 7.56 192 2.50 64 7.13 181 2.94 75 6.38 162 2.19 56

932-4XFSC 9.35 x 3.63 x 3.14 237 x 92 x 80 8.75 x 3.03 x 2.87 222 x 77 x 73 8.10 206 2.38 60 7.94 202 2.75 70 7.22 183 2.03 52

1144-4XFSC 11.13 x 3.81 x 3.89 283 x 97 x 99 10.51 x 3.19 x 3.63 267 x 81 x 92 9.81 249 2.50 64 9.37 238 2.94 75 8.63 219 2.19 56

1432-4XFSC 13.78 x 3.63 x 3.14 350 x 92 x 80 13.19 x 3.03 x 2.87 335 x 77 x 73 12.53 318 2.38 60 12.37 314 2.75 70 11.66 296 2.03 52

1732-4XFSC 17.35 x 3.63 x 3.14 441 x 92 x 80 16.75 x 3.03 x 2.87 426 x 77 x 73 16.10 409 2.38 60 15.94 405 2.75 70 15.22 387 2.03 52

Type 4X Non-Metallic

Section Y-Y

Section X-X

Front View

Without Cover

H M A

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

271 B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Small Junction

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Captive screws provide smooth surfaces

• 300 series stainless steel used on all external hardware

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical and electronic controls and

instruments

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, hose directed water, and prolonged

submersion

Standards

• UL/cUL 50 Listed, Type 1, Type 3R, Type 4X, Type 6P,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3R,

Type 4X, Type 6P, Type 12

• CSA 22.2, Type 1, Type 3R, Type 4X, Type 6P, Type 12

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back Panels (see page 290)

• Mounting Foot kits (see page 294)

• See accessories (pages 292 - 294) Type 4X Non-Metallic

Notes: We can provide special modifications. Consult the factory for your special requirements.

272 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

JIC Fiberglass Enclosures

Type 4X Small Junction

Illustration Sheet and Catalog Number

Enclosure Overall Dimensions Inside Dimensions Dimensions

Catalog #

H x W x D A x B x C E F J K Panel No.

in. mm in. mm in. mm in. mm in. mm in. mm

763-4XFSC 7.63 x 6.63 x 3.19 194 x 168 x 81 6.90 x 5.90 x 2.88 175x150x73 5.37 137 5.63 143 2.48 63 5.37 137 AW76__

963-4XFSC 9.87 x 6.63 x 3.19 251 x 168 x 81 9.15 x 5.90 x 2.88 232x150x73 7.62 194 5.63 143 2.48 63 7.62 194 AW96__

Enclosure Dimensions

Catalog #

L M N

in. mm in. mm in. mm

763-4XFSC 4.25 108 4.52 115 4.90 124

963-4XFSC 4.25 108 6.77 172 4.90 124

Type 4X Non-Metallic

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X

Front View

Without Cover

D K

H M A Y

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

273 B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

Type 4X Non-Metallic

Fiberglass Wall-Mount Enclosures

Type 3R Continuous Hinge Cover

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Rain shield to protect against incidental water ingress

• Twist lock latches provide ease of entry into enclosure

• 300 series stainless steel used on all external hardware

• Integral mounting feet molded in place for ease of mounting

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full length stainless steel hinged cover

• Built in padlock hasp provide optional secure closure locking

(padlock not included)

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical, electronic, instrument, and

mechanical controls

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, falling rain, sleet, and

external ice formation

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 3R

• Conforms to NEMA Standard for Type 1, Type 3,

Type 3R

• CSA 22.2, Type 1, Type 3, Type 3R

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back Panels (pages 290 - 291)

• See accessories (pages 292 - 294)

Notes: We can provide special modifications. Consult the factory for your special requirements.

274 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

Type 4X Non-Metallic

Fiberglass Wall-Mount Enclosures

Type 3R Continuous Hinge Cover

Illustration Sheet and Catalog Number

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X

Front View

E Y Y M A K

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

275

Enclosure Overall Dimensions Inside Dimensions Dimensions Panel

Catalog # Number H x W x D A x B x C E F J K L M N

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

242410-RHCF 27.00 x 25.24 x 11.90 686 x 641 x 302 24.05 x 24.39 x 11.25 611 x 619 x 286 25.75 654 17.87 454 10.25 260 19.25 489 19.25 489 21.25 540 20.00 508 AWF2424__

30208-RHCF 32.86 x 20.99 x 9.89 835 x 533 x 251 29.90 x 20.14 x 9.23 760 x 511 x 234 31.75 806 14.25 362 8.23 209 25.25 641 15.25 387 27.00 686 16.50 419 AWF3020__

302010-RHCF 32.86 x 20.99 x 11.89 835 x 533 x 302 29.90 x 20.14 x 11.23 760 x 511 x 285 31.75 806 14.25 362 10.23 260 25.25 641 15.25 387 27.00 686 16.50 419 AWF3020__

302410-RHCF 33.41 x 26.32 x 11.95 849 x 668 x 304 30.46 x 25.47 x 11.27 774 x 647 x 286 32.25 819 18.50 470 10.27 261 25.25 641 19.25 489 27.38 695 21.25 540 AWF3024__

302412-RHCF 33.41 x 26.32 x 13.79 849 x 668 x 350 30.46 x 25.47 x 13.10 774 x 647 x 333 32.25 819 18.50 470 12.10 307 25.25 641 19.25 489 27.38 695 21.25 540 AWF3024__

36308-RHCF 39.31 x 32.50 x 10.05 999 x 826 x 255 36.31 x 31.69 x 9.36 922 x 805 x 238 38.13 968 23.88 606 8.36 212 31.25 794 25.25 641 33.25 845 27.25 692 AWF3630__

363010-RHCF 39.31 x 32.50 x 12.05 999 x 826 x 306 36.31 x 31.69 x 11.36 922 x 805 x 289 38.13 968 23.88 606 10.36 263 31.25 794 25.25 641 33.25 845 27.25 692 AWF3630__

363012-RHCF 39.31 x 32.50 x 14.05 999 x 826 x 357 36.31 x 31.69 x 13.36 922 x 805 x 339 38.13 968 23.88 606 12.36 314 31.25 794 25.25 641 33.25 845 27.25 692 AWF3630__

483612-RHCF 51.29 x 36.62 x 14.43 1303 x 930 x 367 48.33 x 36.22 x 13.25 1228 x 920 x 336 50.12 1273 29.25 743 12.25 311 43.25 1099 31.25 794 45.25 1149 32.00 813 AWF4836__

483616-RHCF 51.29 x 36.62 x 18.43 1303 x 930 x 468 48.33 x 36.22 x 17.25 1228 x 920 x 438 50.12 1273 29.25 743 16.25 413 43.25 1099 31.25 794 45.25 1149 32.00 813 AWF4836__

B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

Type 4X Non-Metallic

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Twist lock latches provide ease of entry into enclosure

• 300 series stainless steel used on all external hardware

• Integral mounting feet molded in place for ease of mounting

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full length stainless steel hinged cover

• Built in padlock hasp provide optional secure closure locking

(padlock not included)

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical, electronic, instrument, and

mechanical controls

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, and hose directed water

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 3R, Type 4X,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3,

Type 3R, Type 4X, Type 12

• CSA 22.2, Type 1, Type 3, Type 3R, Type 4X, Type 12

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back Panels (pages 290 - 291)

• See accessories (pages 292 - 294)

Notes: We can provide special modifications. Consult the factory for your special requirements.

276 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

Fiberglass Wall-Mount Enclosures

Type 4X Single Door

Data Sheet

Type 4X Non-Metallic

Fiberglass Wall-Mount Enclosures

Type 4X Single-Door

Illustration Sheet and Catalog Number

Enclosure Overall Dimensions Inside Dimensions Dimensions Panel

Catalog # Number H x W x D A x B x C E F J K L M N in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

201612-4XF 22.75 x 16.87 x 13.77 578 x 429 x 350 19.70 x 16.04 x 13.24 500 x 407 x 336 21.50 546 10.12 257 12.26 312 15.25 387 11.25 286 16.75 425 12.19 310 AW2016__

24126-4XF 26.95 x 13.72 x 7.98 685 x 348 x 203 24.00 x 12.87 x 7.33 610 x 327 x 186 25.75 654 6.25 159 6.33 161 19.25 489 7.25 184 21.00 533 8.37 213 AW2412__

241210-4XF 26.95 x 13.72 x 11.99 685 x 348 x 304 24.00 x 12.87 x 11.33 610 x 327 x 288 25.75 654 6.25 159 10.33 262 19.25 489 7.25 184 21.00 533 8.37 213 AW2412__

24208-4XF 27.00 x 21.24 x 9.90 686 x 539 x 252 24.05 x 20.39 x 9.25 611 x 518 x 235 25.75 654 14.00 356 8.25 209 19.25 489 15.25 387 21.25 540 16.00 406 AWF2420__

242410-4XF 27.00 x 25.24 x 11.90 686 x 641 x 302 24.05 x 24.39 x 11.25 611 x 619 x 286 25.75 654 17.87 454 10.25 260 19.25 489 19.25 489 21.25 540 20.00 508 AWF2424__

242412-4XF 27.00 x 25.24 x 13.90 686 x 641 x 353 24.05 x 24.39 x 13.25 611 x 619 x 336 25.75 654 17.87 454 12.25 311 19.25 489 19.25 489 21.25 540 20.00 508 AWF2424__

30206-4XF 32.86 x 20.99 x 7.89 835 x 533 x2 00 29.90 x 20.14 x 7.23 760 x 511 x 184 31.75 806 14.25 362 6.23 158 25.25 641 15.25 387 27.00 686 16.50 419 AWF3020__

30208-4XF 32.86 x 20.99 x 9.89 835 x 533 x 251 29.90 x 20.14 x 9.23 760 x 511 x 234 31.75 806 14.25 362 8.23 209 25.25 641 15.25 387 27.00 686 16.50 419 AWF3020__

302010-4XF 32.86 x 20.99 x 11.89 835 x 533 x 302 29.90 x 20.14 x 11.23 760 x 511 x 285 31.75 806 14.25 362 10.23 260 25.25 641 15.25 387 27.00 686 16.50 419 AWF3020__

302012-4XF 32.86 x 20.99 x 13.89 835 x 533x 353 29.90 x 20.14 x 13.23 760 x 511 x 336 31.75 806 14.25 362 12.23 311 25.25 641 15.25 387 27.00 686 16.50 419 AWF3020__

30248-4XF 33.41 x 26.32 x 8.81 849 x 668x 224 30.46 x 25.47 x 8.12 774 x 647 x 206 32.25 819 18.50 470 7.12 181 25.25 641 19.25 489 27.38 695 21.25 540 AWF3024__

302410-4XF 33.41 x 26.32 x 11.95 849 x 668 x 304 30.46 x 25.47 x 11.27 774 x 647 x 286 32.25 819 18.50 470 10.27 261 25.25 641 19.25 489 27.38 695 21.25 540 AWF3024__

302412-4XF 33.41 x 26.32 x 13.79 849 x 668 x 350 30.46 x 25.47 x 13.10 774 x 647 x 333 32.25 819 18.50 470 12.10 307 25.25 641 19.25 489 27.38 695 21.25 540 AWF3024__

36308-4XF 39.31 x 32.50 x 10.05 999 x 826 x 255 36.31 x 31.69 x 9.36 922 x 805 x 238 38.13 968 23.88 606 8.36 212 31.25 794 25.25 641 33.25 845 27.25 692 AWF3630__

363010-4XF 39.31 x 32.50 x 12.05 999 x 826 x 306 36.31 x 31.69 x 11.36 922 x 805 x 289 38.13 968 23.88 606 10.36 263 31.25 794 25.25 641 33.25 845 27.25 692 AWF3630__

363012-4XF 39.31 x 32.50 x 14.05 999 x 826 x 357 36.31 x 31.69 x 13.36 922 x 805 x 339 38.13 968 23.88 606 12.36 314 31.25 794 25.25 641 33.25 845 27.25 692 AWF3630__

483612-4XF 51.29 x 36,62 x 13.79 1303 x 930 x 350 48.33 x 36.22 x 13.25 1228 x 920 x 336 50.12 1273 28.50 724 12.25 311 21.63 549 31.25 794 45.25 1149 32.00 813 AWF4836__

483616-4XF 51.29 x 36,62 x 17.79 1303 x 930 x 452 48.33 x 36.22 x 17.25 1228 x 920 x 438 50.12 1273 28.50 724 16.25 413 21.63 549 31.25 794 45.25 1149 32.00 813 AWF4836__

603612-4XF 64.00 x 36.50 x 14.12 1627 x 927x359 60.62 x 36.13 x 13.44 1540 x 918 x 341 62.75 1594 28.75 730 12.44 316 27.63 702 31.25 794 57.25 1454 32.00 813 AWF6036__

603616-4XF 64.00 x 36.50 x 18.12 1627 x 927x460 60.62 x 36.13 x 17.44 1540 x 918 x 442 62.75 1594 28.75 730 16.44 418 27.63 702 31.25 794 57.25 1454 32.00 813 AWF6036__

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X

Front View

Y E M A K Y

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

277 B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

Type 4X Non-Metallic

Fiberglass Wall-Mount Enclosures

Type 4X Double-Door

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Twist lock latches provide ease of entry into enclosure

• 300 series stainless steel used on all external hardware

• Integral mounting feet molded in place for ease of mounting

• Integral mounting bosses utilize threaded brass inserts accepting

#10-32 screws for mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full length stainless steel hinged cover

• Built in padlock hasp provide optional secure closure locking

(padlock not included)

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical, electronic, instrument, and

mechanical controls

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, and hose directed water

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 3R, Type 4X,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3,

Type 3R, Type 4X, Type 12

• CSA 22.2, Type 1, Type 3, Type 3R, Type 4X, Type 12

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back Panels (pages 290 - 291)

• See accessories (pages 292 - 294)

Notes: We can provide special modifications. Consult the factory for your special requirements.

278 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

Type 4X Non-Metallic

Fiberglass Wall-Mount Enclosures

Type 4X Double-Door

Illustration Sheet and Data Sheet

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X

Front View

Y Y

N N

* When ordering steel, stainless steel, or aluminum panels (AWF3622__), the part number includes only one (1) panel - two (2) may be

required

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

279

Enclosure Overall Dimensions Inside Dimensions Dimensions Panel

Catalog # Number H x W x D A x B x C E F J K L M N

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

364812-4XFD 39.50 x 48.50 x 13.62 1003 x 1232 x 346 36.12 x 48.12 x 13.00 917 x 1222 x 330 38.25 972 40.50 1029 11.94 303 14.50 368 20.00 508 32.00 813 20.75 527 *

B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

Type 4X Non-Metallic

Fiberglass Ground-Mount Enclosures

Type 4X Free-Standing Single-Door

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Twist lock latches provide ease of entry into enclosure

• 300 series stainless steel used on all external hardware

• Integral mounting bosses utilize threaded brass inserts for

mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full length stainless steel hinged cover

• Built in padlock hasp provide optional secure closure locking

(padlock not included)

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical, electronic, instrument, and

mechanical controls

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, and hose directed water

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 3R, Type 4X,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3,

Type 3R, Type 4X, Type 12

• CSA 22.2, Type 1, Type 3, Type 3R, Type 4X, Type 12

• Temperature Range: -40°F to 250°F (040°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back Panels (pages 290 - 291)

• See accessories (pages 292 - 294)

Notes: We can provide special modifications. Consult the factory for your special requirements.

280 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

Type 4X Non-Metallic

Fiberglass Ground-Mount Enclosures

Type 4X Free-Standing Single-Door

Illustration Sheet and Catalog Number

Enclosure Overall Dimensions Inside Dimensions Dimensions Panel

Catalog # Enclosure Opening Number

H x W x D A x B x C J K L M N in. mm in. mm in. mm in. mm in. mm in. mm in. mm

723618-4XFFS 72.5 x 36.5 x 19.38 1841 x 927 x 492 72.0 x 36.0 x 18.88 1829 x 914 x 479 17.88 454 15.50 388 30.00 762 64.75 1645 32.00 813 AWF7236__

723624-4XFFS 72.5 x 36.5 x 25.38 1841 x 927 x 644 72.0 x 36.0 x 24.88 1829 x 914 x 631 23.88 606 15.50 388 30.00 762 64.75 1645 32.00 813 AWF7236__

903636-4XFFS 90.5 x 36.5 x 37.88 2299 x 927 x 949 90.0 x 36.0 x 37.38 2286 x 914 x 949 36.25 921 20.00 508 30.00 762 82.75 2102 32.00 813 AWF9036__

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X

Front View

Y Y

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

281 B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

Type 4X Non-Metallic

Fiberglass Ground-Mount Enclosures

Type 4X Free-Standing Double-Door

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Twist lock latches provide ease of entry into enclosure

• 300 series stainless steel used on all external hardware

• Integral mounting bosses utilize threaded brass inserts for

mounting optional panel

• Rounded edges reduce build-up of dust and debris

• Full length stainless steel hinged cover

• Built in padlock hasp provide optional secure closure locking

(padlock not included)

Discount Schedule: F2

Subclass: G00

Application

• Houses electrical, electronic, instrument, and

mechanical controls

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, and hose directed water

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 3R, Type 4X,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3,

Type 3R, Type 4X, Type 12

• CSA 22.2, Type 1, Type 3, Type 3R, Type 4X, Type 12

• Temperature Range: -40°F to 250°F (040°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• Back Panels (pages 290 - 291)

• See accessories (pages 292 - 294)

Notes: We can provide special modifications. Consult the factory for your special requirements.

282 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

Type 4X Non-Metallic

Fiberglass Ground-Mount Enclosures

Type 4X Free-Standing Double-Door

Illustration Sheet and Catalog Number

Panel Finishes

Example: AW108__

Insert for __

P = Carbon Steel

SP = Stainless Steel

AP = Aluminum

Section Y-Y

Section X-X

Front View

Y Y

N N

L L

* When ordering panels, the part number includes only one (1) panel - two (2) are required

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

283

Enclosure Overall Dimensions Inside Dimensions Dimensions Panel

Catalog # Enclosure Opening Number

H x W x D A x B x C J K L M N

in. mm in. mm in. mm in. mm in. mm in. mm in. mm

724818-4XFFSD 72.5 x 58.5 x 19.38 1841 x 1232 x 492 72.0 x 48.0 x 18.88 1829 x 1219 x 476 17.88 454 15.50 388 19.50 495 64.75 1645 20.50 521 *AWF7221

727218-4XFFSD 72.5 x 72.5 x 19.38 1841 x 1842 x 492 72.0 x 72.0 x 18.88 1829 x 1829 x 479 17.88 454 15.50 388 31.50 800 64.75 1645 32.50 826 *AWF7233

B-Line series electrical enclosures Eaton

Type 4X Non-Metallic Enclosures

Type 4X Non-Metallic

Fiberglass Pushbutton Enclosures

Type 4X In-Line 30 mm

Data Sheet

Construction

• Enclosures are an impact resistant, non-conductive, light-weight

hot compression molded Non-Metallic reinforced polyester

• Poured polyurethane seamless gasket provides watertight,

dust-tight environmental seal

• Recessed captive screws provide smooth surfaces

• Secure mounting of pushbutton in non-rotatable notched key hole

• 300 series stainless steel used on all external hardware

• Rounded edges reduce build-up of dust and debris

• Full metal grounding strap is provided

Discount Schedule: F2

Subclass: G00

Application

• Designed to mount standard oil-tight pushbuttons, pilot

lights, and switches

• Intended for indoor or outdoor use

• Ideally suited for harsh environments

• Protects against corrosion, windblown dust and rain,

splashing water, hose directed water, and prolonged

submersion

Standards

• UL/cUL 50 Listed, Type 1, Type 3, Type 4X, Type 6P,

Type 12

• Conforms to NEMA Standard for Type 1, Type 3,

Type 4X, Type 6P, Type 12

• CSA 22.2, Type 1, Type 3, Type 4X, Type 6P, Type 12

• Temperature Range: -40°F to 250°F (-40°C to 120°C)

• Flammability Rating: UL94-5V

• Self Extinguishing: Non-flame propagating

• Chemical Resistance: (see chart, pages 464 - 467)

Finish

• Gray color

Accessories

• See accessories (pages 292 - 294)

Notes: We can provide special modifications. Consult the factory for your special requirements.

284 Eaton B-Line series electrical enclosures

Type 4X Non-Metallic Enclosures

快速跳转到指定页