该页无缩略图
Type 4X Non-Metallic
Fiberglass Pushbutton Enclosures
Type 4X In-Line 30 mm
Illustration Sheet and Catalog Number
Section Y-Y
Section X-X
Front View
Front View
Without Cover
N
C
B
D
K
L
I
J
Y H M A Y
X
X
W
.190 (5mm)
.672 (17mm) 1.210 (31mm)
PV5F PV6F
PV3F PV4F
PV1F PV2F
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
285
Enclosure Overall Dimensions Inside Dimensions Dimensions
Catalog #
H x W x D A x B x C I J K L M N O
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
PV1F 6.63 x 3.81 x 3.89 168 x 97 x 99 6.00 x 3.19 x 3.63 153 x 81 x 92 5.31 135 2.50 64 4.88 124 2.94 75 4.13 105 2.19 56 3.31 84
PV2F 6.63 x 3.81 x 3.89 168 x 97 x 99 6.00 x 3.19 x 3.63 153 x 81 x 92 5.31 135 2.50 64 4.88 124 2.94 75 4.13 105 2.19 56 2.19 56
PV3F 8.88 x 3.81 x 3.89 225 x 97 x 99 8.26 x 3.19 x 3.63 210 x 81 x 92 7.56 192 2.50 64 7.13 181 2.94 75 6.38 162 2.19 56 2.19 56
PV4F 11.13 x 3.81 x 3.89 283 x 97 x 99 10.51 x 3.19 x 3.63 267 x 81 x 92 9.81 249 2.50 64 9.37 238 2.94 75 8.63 219 2.19 56 2.19 56
PV5F 13.78 x 3.63 x 3.14 350 x 92 x 80 13.19 x 3.03 x 2.87 335 x 77 x 73 12.53 318 2.38 60 12.37 314 2.75 70 11.66 296 2.03 52 2.39 61
PV6F 17.35 x 3.63 x 3.14 441 x 92 x 80 16.75 x 3.03 x 2.87 426 x 77 x 73 16.10 409 2.38 60 15.94 405 2.75 70 15.22 387 2.03 52 3.05 77
B-Line series electrical enclosures Eaton
Type 4X Non-Metallic Enclosures
Type 4X Non-Metallic
Fiberglass Pushbutton Enclosures
Type 4X In-Line 22 mm
Data Sheet
Construction
• Enclosures are an impact resistant, non-conductive, light-weight
hot compression molded Non-Metallic reinforced polyester
• Poured polyurethane seamless gasket provides watertight,
dust-tight environmental seal
• Recessed captive screws provide smooth surfaces
• Secure mounting of pushbutton in non-rotatable notched key hole
• 300 series stainless steel used on all external hardware
• Rounded edges reduce build-up of dust and debris
• Full metal grounding strap is provided
Discount Schedule: F2
Subclass: G00
Application
• Designed to mount standard oil-tight pushbuttons, pilot
lights, and switches
• Intended for indoor or outdoor use
• Ideally suited for harsh environments
• Protects against corrosion, windblown dust and rain,
splashing water, hose directed water, and prolonged
submersion
Standards
• UL/cUL 50 Listed, Type 1, Type 3, Type 4X, Type 6P,
Type 12
• Conforms to NEMA Standard for Type 1, Type 3,
Type 4X, Type 6P, Type 12
• CSA 22.2, Type 1, Type 3, Type 4X, Type 6P, Type 12
• Temperature Range: -40°F to 250°F (-40°C to 120°C)
• Flammability Rating: UL94-5V
• Self Extinguishing: Non-flame propagating
• Chemical Resistance: (see chart, pages 464 - 467)
Finish
• Gray color
Accessories
• See accessories (page 292 - 293)
Notes: We can provide special modifications. Consult the factory for your special requirements.
286 Eaton B-Line series electrical enclosures
Type 4X Non-Metallic Enclosures
Type 4X Non-Metallic
Fiberglass Pushbutton Enclosures
Type 4X In-Line 22 mm
Illustration Sheet and Catalog Number
Enclosure Overall Dimensions Inside Dimensions Dimensions
Catalog #
H x W x D A x B x C I J K L M N O
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
PV1MF 6.63 x 3.81 x 3.89 168 x 97 x 99 6.00 x 3.19 x 3.63 153 x 81 x 92 5.31 135 2.50 64 4.88 124 2.94 75 4.13 105 2.19 56 3.31 84
PV2MF 6.63 x 3.81 x 3.89 168 x 97 x 99 6.00 x 3.19 x 3.63 153 x 81 x 92 5.31 135 2.50 64 4.88 124 2.94 75 4.13 105 2.19 56 2.19 56
PV3MF 6.63 x 3.81 x 3.89 225 x 97 x 99 6.00 x 3.19 x 3.63 153 x 81 x 92 5.31 135 2.50 64 4.88 124 2.94 75 4.13 105 2.19 56 1.75 44
PV4MF 8.88 x 3.81 x 3.89 225 x 97 x 99 8.26 x 3.19 x 3.63 210 x 81 x 92 7.56 192 2.50 64 7.13 181 2.94 75 6.38 162 2.19 56 2.09 53
PV5MF 11.13 x 3.81 x 3.89 283 x 97 x 99 10.51 x 3.19 x 3.63 267 x 81 x 92 9.81 249 2.50 64 9.37 238 2.94 75 8.63 219 2.19 56 2.44 62
PV6MF 11.13 x 3.81 x 3.89 283 x 97 x 99 10.51 x 3.19 x 3.63 267 x 81 x 92 9.81 249 2.50 64 9.37 238 2.94 75 8.63 219 2.19 56 1.66 42
1.56
.125 (3mm)
.468 (12mm) .875 (22mm)
Section Y-Y
Section X-X
Front View
Front View
Without Cover
N
C
B
D
K
L
I
J
Y
H M A
Y
X
X
O
W
1.56 (40mm)
1.56 (40mm)
1.56 (40mm)
PV5MF PV6MF
PV3MF PV4MF
PV1MF PV2MF
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
287 B-Line series electrical enclosures Eaton
Type 4X Non-Metallic Enclosures
Type 4X Non-Metallic
Fiberglass Pushbutton Enclosures
Type 4X Multi-Hole 30 mm
Data Sheet
Construction
• Enclosures are an impact resistant, non-conductive, light-weight
hot compression molded Non-Metallic reinforced polyester
• Poured polyurethane seamless gasket provides watertight,
dust-tight environmental seal
• Captive screws provide smooth surfaces
• Secure mounting of pushbutton in non-rotatable notched key hole
• 300 series stainless steel used on all external hardware
• Integral flange molded in place for ease of mounting
• Integral mounting bosses utilize threaded brass inserts accepting
#10-32 screws for mounting optional panel
• Rounded edges reduce build-up of dust and debris
• Full metal grounding strap is provided
• Stainless steel beaded chain for securing cover after lift off
Discount Schedule: F2
Subclass: G00
Application
• Designed to mount standard oil-tight pushbuttons, pilot
lights, and switches
• Intended for indoor or outdoor use
• Ideally suited for harsh environments
• Protects against corrosion, windblown dust and rain,
splashing water, hose directed water, and prolonged
submersion
Standards
• UL/cUL 50 Listed, Type 1, Type 3, Type 4X, Type 6P,
Type 12
• Conforms to NEMA Standard for Type 1, Type 3,
Type 4X, Type 6P, Type 12
• CSA 22.2, Type 1, Type 3, Type 4X, Type 6P, Type 12
• Temperature Range: -40°F to 250°F (-40°C to 120°C)
• Flammability Rating: UL94-5V
• Self Extinguishing: Non-flame propagating
• Chemical Resistance: (see chart, pages 464 - 467)
Finish
• Gray color
Accessories
• Back Panels (page 290)
• See accessories (pages 292 - 294)
Notes: We can provide special modifications. Consult the factory for your special requirements.
288 Eaton B-Line series electrical enclosures
Type 4X Non-Metallic Enclosures
Type 4X Non-Metallic
Fiberglass Pushbutton Enclosures
Type 4X Multi-Hole 30 mm
Illustration Sheet and Catalog Number
Enclosure Overall Dimensions Inside Dimensions
Catalog # H x W x D A x B x C E F Hole Dia. Panel No.
in. mm in. mm in. mm in. mm in. mm
PB4F 7.50 x 7.50 x 4.75 191 x 191 x 121 5.72 x 5.72 x 4.45 145 x 145 x 113 6.75 171 4.00 101 0.31 8 AW66__
PB6F 9.62 x 7.50 x 4.74 244 x 191 x 121 7.73 x 5.74 x 4.45 196 x 146 x 113 8.88 225 4.00 101 0.31 8 AW86__
PB9F 11.62 x 9.41 x 4.25 295 x 239 x 108 9.73 x 7.73 x 3.98 247 x 196 x 101 10.75 273 6.00 152 0.31 8 AW108__
Enclosure Dimensions
Catalog # J K L M N O P
in. mm in. mm in. mm in. mm in. mm in. mm in. mm
PB4F 4.00 101 4.25 108 4.25 108 0.25 6 7.52 191 2.64 67 2.64 67
PB6F 4.00 101 6.25 159 4.25 108 0.25 6 9.50 242 2.64 67 2.51 64
PB9F 3.50 89 8.25 209 6.25 159 0.25 6 11.35 288 3.43 87 2.45 62
Panel Finishes
Example: AW108__
Insert for __
P = Carbon Steel
SP = Stainless Steel
AP = Aluminum
Section Y-Y
Section X-X
Front View
B
C
L
D J
J
Y
N
M
A K E H
Y
P
X
X
O
W
2.25 (57mm)
hole dia.
4 places
.190 (5mm)
.672 (17mm) 1.210 (31mm)
PB4F
PB9F
PB6F
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
289 B-Line series electrical enclosures Eaton
Type 4X Non-Metallic Enclosures
Type 4X Non-Metallic
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Non-Metallic Accessories
Illustration Sheet and Catalog Number Discount Schedule: F2
Subclass: DSA, DSB
Back Panels B
E
E
H
B - (2 x E)
A - (2 x E)
A
Flat Panel for Non-Metallic Enclosures Fits Enclosure
Polycarbonate Hole Dia. (Nominal)
Painted Swing A B E H Height x Width
Steel Stainless Aluminum Panel Kit in. mm in. mm in. mm in. mm Gauge in. mm
AW64P AW64SP AW64AP 4.87 124 2.87 73 0.31 8 0.25 6 14 6.00 x 4.00 152 x 102
AW66P AW66SP AW66AP 66PCSP 4.87 124 4.87 124 0.31 8 0.25 6 14 6.00 x 6.00 152 x 152
AW76P AW76SP AW76AP 6.00 152 4.87 124 0.31 8 0.25 6 14 7.00 x 6.00 178 x 152
AW86P AW86SP AW86AP 86PCSP 6.87 174 4.87 124 0.31 8 0.25 6 14 8.00 x 6.00 203 x 152
AW88P AW88SP AW88AP 88PCSP 6.87 174 6.87 174 0.31 8 0.25 6 14 8.00 x 8.00 203 x 203
AW96P AW96SP AW96AP 8.25 209 4.87 124 0.31 8 0.25 6 14 9.00 x 6.00 228 x 152
AW108P AW108SP AW108AP 108PCSP 8.87 225 6.87 174 0.31 8 0.25 6 14 10.00 x 8.00 254 x 203
AW1010P AW1010SP AW1010AP 1010PCSP 8.87 225 8.87 225 0.31 8 0.25 6 14 10.00 x 10.00 254 x 254
AW1210P AW1210SP AW1210AP 1210PCSP 10.87 276 8.87 225 0.31 8 0.25 6 14 12.00 x 10.00 305 x 254
AW1212P AW1212SP AW1212AP 10.87 276 10.87 276 0.31 8 0.25 6 14 12.00 x 12.00 305 x 305
AW147P AW147SP AW147AP 12.87 327 5.87 149 0.31 8 0.25 6 14 14.00 x 7.00 356 x 178
AW1412P AW1412SP AW1412AP 1412PCSP 12.87 327 10.87 276 0.31 8 0.25 6 14 14.00 x 12.00 356 x 305
AW1614P AW1614SP AW1614AP 1614PCSP 14.87 378 12.87 327 0.31 8 0.25 6 14 16.00 x 14.00 406 x 356
AW1816P AW1816SP AW1816AP 1816PCSP 16.88 429 14.88 378 0.31 8 0.25 6 14 18.00 x 16.00 457 x 406
AW2016PJ AW2016SPJ AW2016APJ 18.88 479 14.88 378 0.31 8 0.25 6 14 20.00 x 16.00 508 x 406
AWF2424PJ AWF2424SPJ AWF2424APJ 22.88 581 22.88 581 0.31 8 0.25 6 14 24.00 x 24.00 610 x 610
AW2016P AW2016SP AW2016AP 2016PCSP 17.00 432 13.00 330 0.88 22 0.56 14 12 20.00 x 16.00 508 x 406
AW2412P AW2412SP AW2412AP 21.00 533 9.00 229 0.88 22 0.56 14 12 24.00 x 12.00 610 x 305
AWF2420P AWF2420SP AWF2420AP 21.00 533 17.00 432 0.88 22 0.56 14 12 24.00 x 20.00 610 x 508
AWF2424P AWF2424SP AWF2424AP 21.00 533 21.00 533 0.88 22 0.56 14 12 24.00 x 24.00 610 x 610
AWF3020P AWF3020SP AWF3020AP 27.00 686 17.00 432 0.88 22 0.56 14 12 30.00 x 20.00 762 x 508
AWF3024P AWF3024SP AWF3024AP 27.00 686 21.00 533 0.88 22 0.56 14 12 30.00 x 24.00 762 x 610
AWF3622P AWF3622SP AWF3622AP 31.00 787 22.00 559 1.00 25 0.56 14 12 36.00 x 48.00 914 x 1219
AWF3630P AWF3630SP AWF3630AP 33.00 838 27.00 686 0.88 22 0.56 14 12 36.00 x 30.00 914 x 762
(omit when enclosure height
is less than 29 inches)
CL
290 Eaton B-Line series electrical enclosures
Type 4X Non-Metallic Enclosures
Polycarbonate swing panel kit - aluminum
Type 4X Non-Metallic
Non-Metallic Accessories
Illustration Sheet and Catalog Number Discount Schedule: F2
Subclass: DSB
Back Panels
Flanged Panel for Non-Metallic Enclosures Fits Enclosure
Hole Dia. (Nominal)
Painted A B E H Height x Width
Steel Stainless Aluminum in. mm in. mm in. mm in. mm Gauge in. mm
AWF4836P AWF4836SP AWF4836AP 45.00 1143 33.00 838 0.88 22 0.56 14 12 48.00 x 36.00 1219 x 914
AWF6036P AWF6036SP AWF6036AP 57.00 1448 33.00 838 0.88 22 0.56 14 12 60.00 x 36.00 1524 x 914
AWF7221P AWF7221SP AWF7221AP 64.00 1625 21.50 546 1.00 25 0.56 14 12 72.00 x 48.00 1829 x 1219
AWF7224P AWF7224SP AWF7224AP 64.00 1625 20.00 508 1.00 25 0.56 14 12 72.00 x 24.00 1829 x 609
AWF7233P AWF7233SP AWF7233AP 64.00 1625 33.50 851 1.00 25 0.56 14 12 72.00 x 72.00 1829 x 1829
AWF7236P AWF7236SP AWF7236AP 64.00 1625 32.00 813 1.00 25 0.56 14 12 72.00 x 36.00 1829 x 914
-- -- -- 64.00 1625 21.50 546 1.00 25 0.56 14 12 72.00 x 48.00 1829 x 1219
-- -- -- 64.00 1625 33.50 851 1.00 25 0.56 14 12 72.00 x 72.00 1829 x 1329
AWF9036P AWF9036SP AWFF9036AP 82.00 2083 32.00 813 1.00 25 0.56 14 12 90.00 x 36.00 2286 x 914
1
See
Drawing
3
2
Drawing
1
Drawing
2 Drawing
3
B
A
B - (2 x E)
A - (2 x E)
B
A
B - (2 x E)
A - (2 x E)
B
A
B - (2 x E)
A - (2 x E)
H
E
E
H
E
E
H
E
E
CL
CL
CL
CL
CL
CL
(omit when
enclosure width
is less than 311
/4
inches)
.500
(12)
.500
(12)
.500
(12)
15.50
(394)
15.50
(394)
20.00
(508)
20.00
(508)
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
291 B-Line series electrical enclosures Eaton
Type 4X Non-Metallic Enclosures
Type 4X Non-Metallic
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Non-Metallic Accessories
Illustration Sheet and Catalog Number Discount Schedule: F2
Subclass: G00
Breather Vent
Drain Vent
Non-metallic breather vent allows an enclosure to breathe, allowing the free passage of air while maintaining UL Type 4X enclosure integrity as a recognized component.
Non-metallic drain vent reliably protects electrical
equipment housed inside an enclosure by properly
draining unwanted mositure or accumulated water
from within, while maintaining UL Type 4X enclosure
integrity as a recognized component.
Drain & Vent Vapor Capsule
Vapor capsules contain a unique phase inhibitor designed to protect
metallic surfaces within an enclosure against airborne corrosion. Simply
place these self-contained capsules inside an enclosure, the vapors
readily permeate every point, passivating all metallic surfaces. When
the capsule is removed from its sealed package, it begins to emit an
invisible, no-toxic vapor which is diffused throughout the surrounding
atmosphere until the air is saturated. The vapor then passivates the
metal surface against atmospheric corrosion by reducing the electrochemical activity of the metal surfaces.
292
Enclosure Catalog #
DV
Enclosure Catalog #
BLVC
Enclosure Catalog #
DV4X
Enclosure Catalog #
BV4X
Eaton B-Line series electrical enclosures
Type 4X Non-Metallic Enclosures
Type 4X Non-Metallic
Non-Metallic Accessories
Illustration Sheet and Catalog Number Discount Schedule: F2
Subclass: G00
Louver Plate Vent
Helps protects knockout openings and
extra pushbutton or concuit openings
from dirt, oil, dust and water. Each hole
seal has oil-resistant gasketing and lock
nut.
Carrying Handle
Enclosure Application Max. Hole Hole Seal
Catalog # in. mm in. mm
SPBGFG Minature oil-tight bushbutton holes 0.88 22 1.22 31
SPBFG Standard oil-tight bushbutton holes 1.25 32 1.75 44
S050FG 1
/2\" conduit holes 0.88 22 1.38 35
S075FG 3
/4\" conduit holes 1.06 27 1.56 40
S100FG 1\" conduit holes 1.38 35 1.88 48
S125FG 11
/4\" conduit holes 1.69 43 2.19 56
S150FG 11
/2\" conduit holes 2.00 51 2.50 64
S200FG 2\" conduit holes 2.50 64 3.00 76
S250FG 21
/2\" conduit holes 3.00 76 3.50 89
S300FG 3\" conduit holes 3.62 92 4.12 105
S350FG 31
/2\" conduit holes 4.12 105 4.62 117
S400FG 4\" conduit holes 4.62 117 5.12 130
Oil-Tight Hole Seals
3.86\"
4.80\"
5.59\"
1.57\" 0.31\"
1.02\"
0.25 dia.
2 places
0.24 Dia.
4.80\"
2.40\"
3.86\"
.75\"
.375\"
.375\"
.375\" silicone
seal silicone
seal
.75\"
.063\"
1.84\"
3.00\"
dia.
3.69\"
drill
.203\" dia.
4 places
Cut-Out Detail
1.53\"
3.062\"
4.436\"
3.688\"
2.969\"
3.813\"
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
293
Enclosure Catalog #
LPKF
Enclosure Catalog #
CARRY HANDLE
B-Line series electrical enclosures Eaton
.250\" dia.
4 places
Type 4X Non-Metallic Enclosures
Type 4X Non-Metallic
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Non-Metallic Accessories
Illustration Sheet and Catalog Number Discount Schedule: F2
Subclass: G00
Mounting Feet
Encapsulated Screws
Polycarbonate Accessories
Swing Panel Mounts & Slot Nut Kit
Enclosure Catalog #
ENCAP2K
ENCAP4K
Catalog # Description Pieces included
SPMKPC Swing panel mounts Four per kit
SNKPC Slot nut kit Two nuts & two screws
Stainless Steel Screws
Enclosure Catalog # Description
SS2PK Set of 2
SS4PK Set of 4
Enclosure Catalog #
MTGFTKITSD
SS4PK
SS2PK
ENCAP4K
ENCAP2K
294 Eaton B-Line series electrical enclosures
Type 4X Non-Metallic Enclosures
Swing panel mounts - SPMKPC
Slot nut kit - SNKPC
Wall-Mount Enclosures Type 12 Flange-Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296-298
Wall-Mount Enclosures Type 4 & 4X Premier™ Series 2-Point or 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . . . 299-300
Wall-Mount Enclosures Disconnect Mechanisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301-306
Ground-Mount Enclosures Type 12 Center & Flange-Mount Floor-Standing 3-Point Locking . . . . . . . . . . . . 307-311
Floor-Standing Enclosures Disconnect Mechanisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312-319
Ground-Mount Enclosures Type 12 Heavy-Duty Single & Multi Door
Flange-Mount Free-Standing 3-Point Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320-326
Ground-Mount Enclosures Type 12 Modular Free-Standing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327-331
Free-Standing Enclosures Disconnect Mechanisms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332-339
Disconnect Encl.
Disconnect Enclosures
295 B-Line series electrical enclosures Eaton
Wall-Mount Enclosures
Type 12 Flange-Mount
Data Sheet
Standards
• UL 508A listed, Type 12 and Type 13
• CSA C22.2 No.94 certified, Type 12 and Type 13
• Conforms to NEMA standard for Type 12 and Type 13
Finish
• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories
• Panels
• Touch-up paint
• See Accessories section
Construction
• Enclosure and door are fabricated from (14) gauge steel
• All continuous welded seams are finished smooth
• Door is secured to the body with a heavy-duty continuous
hinge
• Door has an interlock bracket, collar studs and hardware to
accept a door closing mechanism
• Door has a seamless poured in-place gasket
• Ground stud provided on door and body
• Print pocket provided
• Formed lip around enclosure opening diverts liquids and
contaminants
• Holes are provided on body flange and door for mounting a
disconnect operating mechanism, (mechanism not furnished
with enclosure -- see manufacturer's table, pages 301 - 306)
• Enclosures include a properly sized 2-pt latching bar
(under 40 inches) or a 3-point latching bar (40 inches or higher)
• .375-16 collar studs are provided for mounting optional panel
• External mounting feet are provided for secure wall mounting
Discount Schedule: C2
Subclass: DO0
Application
• Houses electrical controls and instruments
• Protects against circulating dust, falling dirt and
dripping noncorrosive liquids
• Designed to house the following:
1. Allen-Bradley† Bulletin 1494V or 1494U disconnect
switches with flange-mounted variable depth
operating mechanisms and Bulletin 1494V or
1494U flange-mounted variable depth operating
mechanisms for circuit breakers.
2. Cutler-Hammer† Type C361 flange-mounted
variable depth operating mechanisms with
disconnect switches and Type C371 flange
mounted variable depth operating mechanisms
for circuit breakers. Also Flex Shaft™ handle
mechanisms for circuit breakers.
3. General Electric† Type STDA flange handles and
variable depth operating mechanisms for
disconnect switches and circuit breakers. Also
Spectra Flex™ cable operators for circuit breakers.
4. I-T-E Max-Flex™† flange-mounted variable depth
operating handle for disconnect switches and
circuit breakers as well as some fixed depth
operators for disconnect switches.
5. Square D† Class 9422 disconnect switches with
flange-mounted variable depth operating
mechanisms or cable mechanisms and Class 9422
flange-mounted variable depth operating
mechanisms or,cable mechanisms for circuit
breakers.
6. ABB Controls† flange-mounted variable depth
operating mechanisms for disconnect switches and
circuit breakers.
Important Note
Latching bar, latching bar bracket interlock, hardware and
instruction sheet to locate and install disconnects are furnished
with enclosure.
Disconnect switch (or circuit breaker), operating handle,
operating mechanism and door closing hardware are not
furnished with enclosure, see disconnect ordering information
pages 301-306
Disconnect Encl.
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
† Marks are the property of their respective owners.
296
Disconnect Enclosures
Eaton B-Line series electrical enclosures
Wall-Mount Enclosures
Type 12 Flange-Mount
Illustration Sheet and Catalog Number
Enclosure Enclosure Size Panel Panel Size
Height x Width x Depth
A x B x C Height x Width
Catalog Number in. mm Catalog Number in. mm
FD20218-12 20.00 x 21.37 x 8.00 508 x 543 x 203 AW2020P 17.00 x 17.00 432 x 432
FD24218-12 24.00 x 21.37 x 8.00 610 x 543 x 203 AW2420P 20.87 x 16.87 530 x 428
FD24258-12 24.00 x 25.37 x 8.00 610 x 644 x 203 AW2424P 20.87 x 20.87 530 x 530
FD30218-12 30.00 x 21.37 x 8.00 762 x 543 x 203 AW3020P 26.87 x 16.87 682 x 428
FD30258-12 30.00 x 25.37 x 8.00 762 x 644 x 203 AW3024P 26.87 x 20.87 682 x 530
FD36258-12 36.00 x 25.37 x 8.00 914 x 644 x 203 AW3624P 32.87 x 20.87 835 x 530
FD36318-12 36.00 x 31.37 x 8.00 914 x 797 x 203 AW3630P 32.87 x 26.87 835 x 682
FD42318-12 42.00 x 31.37 x 8.00 1067 x 797 x 203 AW4230P 38.87 x 26.87 987 x 682
FD42378-12 42.00 x 37.37 x 8.00 1067 x 949 x 203 AW4236P 38.87 x 32.87 987 x 835
FD48378-12 48.00 x 37.37 x 8.00 1219 x 949 x 203 AW4836P 44.87 x 32.87 1140 x 835
FD60378-12 60.00 x 37.37 x 8.00 1524 x 949 x 203 AW6036P 56.87 x 32.87 1444 x 835
FD202110-12 20.00 x 21.37 x 10.00 508 x 543 x 254 AW2020P 17.00 x 17.00 432 x 432
FD242110-12 24.00 x 21.37 x 10.00 610 x 543 x 254 AW2420P 20.87 x 16.87 530 x 428
FD242510-12 24.00 x 25.37 x 10.00 610 x 644 x 254 AW2424P 20.87 x 20.87 530 x 530
FD302110-12 30.00 x 21.37 x 10.00 762 x 543 x 254 AW3020P 26.87 x 16.87 682 x 428
FD302510-12 30.00 x 25.37 x 10.00 762 x 644 x 254 AW3024P 26.87 x 20.87 682 x 530
FD362510-12 36.00 x 25.37 x 10.00 914 x 644 x 254 AW3624P 32.87 x 20.87 835 x 530
FD363110-12 36.00 x 31.37 x 10.00 914 x 797 x 254 AW3630P 32.87 x 26.87 835 x 682
FD423110-12 42.00 x 31.37 x 10.00 1067 x 797 x 254 AW4230P 38.87 x 26.87 987 x 682
FD423710-12 42.00 x 37.37 x 10.00 1067 x 949 x 254 AW4236P 38.87 x 32.87 987 x 835
FD483710-12 48.00 x 37.37 x 10.00 1219 x 949 x 254 AW4836P 44.87 x 32.87 1140 x 835
FD603710-12 60.00 x 37.37 x 10.00 1524 x 949 x 254 AW6036P 56.87 x 32.87 1444 x 835
FD302512-12 30.00 x 25.37 x 12.00 762 x 644 x 305 AW3024P 26.87 x 20.87 682 x 530
FD363112-12 36.00 x 31.37 x 12.00 914 x 797 x 305 AW3630P 32.87 x 26.87 835 x 682
FD423112-12 42.00 x 31.37 x 12.00 1067 x 797 x 305 AW4230P 38.87 x 26.87 987 x 682
FD423712-12 42.00 x 37.37 x 12.00 1067 x 949 x 305 AW4236P 38.87 x 32.87 987 x 835
FD483712-12 48.00 x 37.37 x 12.00 1219 x 949 x 305 AW4836P 44.87 x 32.87 1140 x 835
FD603712-12 60.00 x 37.37 x 12.00 1524 x 949 x 305 AW6036P 56.87 x 32.87 1444 x 835
FD603712A-12* 60.00 x 37.37 x 12.00 1524 x 949 x 305 AW6036P 56.87 x 32.87 1444 x 835
FD363116-12 36.00 x 31.37 x 16.00 914 x 797 x 406 AW3630P 32.87 x 26.87 835 x 682
FD483716-12 48.00 x 37.37 x 16.00 1219 x 949 x 406 AW4836P 44.87 x 32.87 1140 x 835
FD603716-12 60.00 x 37.37 x 16.00 1524 x 949 x 406 AW6036P 56.87 x 32.87 1444 x 835
D
(When enclosure depth is:)
8 10 12 16
in. mm in. mm in. mm in. mm
4.75 121 7.09 180 11.62 295 11.62 295
E = .28 (7) Dia. hole
F = .50 x 1.50 (13x38) slot
2.37
(60)
1.60
(41) 3.50
(89)
2.93
(74) 4.68
(119)
1.06
(27)
E
E
F
F
D
Flange Hole Detail
Flange Section
Flange Hole Location Table
* The 400 amp and 600 amp Allen-Bradley† Bulletin 1494V or 1494U disconnect
switches and I-T-E Siemens† 800 amp and 1200 amp circuit breakers will not fit
any other enclosure except catalog number FD603712A-12. Enclosures 12 inches
and 16 inches deep can be modified to accept I-T-E Siemens† 800 amp and
1200 amp circuit breakers. When enclosure “A” dimension is 30, 36, or 42
inches, verify the amount of wire bend space required for both the line and
load sides.
Notes: Catalog number FD603712A-12 has a larger cutout in the enclosure flange to accomodate the Allen-Bradley 1494V-H2 and the I-T-E FHOHN
operating handles. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
297 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Wall-Mount Enclosures
Type 12 Flange-Mount
Illustration Sheet
print pocket
(supplied)
body stiffener
(omit where “B” is less than 30)
.375-16 collar stud
(omit center studs where “A” is less than 36)
.375-16 collar stud
(omit center studs where “B” is less than 36)
CL
B-6.12
(155)
B C
B-6.00
(152)
∅ .44
(11)
mounting
hole (2PL)
C
2.38
(60)
2.37
(60)
X
X
mounting feet
A A+1.25
(32)
A-4.75
(121)
Section X-X
Disconnect Encl.
298 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
Wall-Mount Enclosures - Type 4 & 4X Premier™ Series with 2-Point or 3-Point Locking
Data Sheet
Standards
• UL 508A listed, Type 4 or 4X, Type 12 and Type 13
• CSA C22.2 No.94 certified, Type 12 and Type 13
• Conforms to NEMA standard for Type 4 and Type 12/13
Finish
• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
• Stainless enclosures are offered with a brushed finish in both
304 and 316L stainless steel.
Accessories
• Premier panels
• NEMA panel adapters
• Depth adjustment brackets
• Print pockets
• Mounting foot kits
• Swing-out panels
Construction
• Enclosure and door are fabricated from code gauge steel
(see table)
• Hardware kit (provided) contains grounding hardware,
.312-18 flanged hex nuts for panel mounting, and sealing
washers for body mounting holes
• Body flange trough design, formed around body opening, diverts
liquid contaminants away from door opening
• Reduced width flange design increases enclosure opening
• Ground stud provided on enclosure body with provision on door
• .312-18 collar studs are provided for mounting optional
Premier panels
• Enclosure mounting holes in body provided for direct mounting
or optional mounting feet
• Utility bracket provides wire management and accessory mounting
• Padlocking “tool-to-open” handle with 2-point or 3-point door
closing hardware installed
• Door is secured to the body with a concealed hinge
• Door is easily removed and interchangeable
• Door has a seamless foam-in-place gasket
• Door opens 170° for easy access
• Latching system interlocks with the disconnect handle for added
safety
Discount Schedule: C2
Subclass: TCD (Type 4) TED (Type 4X)
Application
• Provides housing for electrical controls and instruments
• Suitable for indoor or outdoor use
• Protects against circulating and windblown dust, falling
dirt, dripping non-corrosive liquids, rain, splashing
water, and hose-directed water
• Designed to house the following:
1. Allen-Bradley† Bulletin 1494V or 1494U disconnect
switches with flange-mounted variable depth
operating mechanisms and Bulletin 1494V or
1494U flange-mounted variable depth operating
mechanisms for circuit breakers.
2. Cutler-Hammer† Type C361 flange-mounted
variable depth operating mechanisms with
disconnect switches and Type C371 flange-mounted
variable depth operating mechanisms for circuit
circuit breakers. Also Flex Shaft™ handle
mechanisms for circuit breakers.
3. General Electric† Type STDA flange handles and
variable depth operating mechanisms for disconnect
switches and circuit breakers. Also Spectra Flex™
cable operators for circuit breakers.
4. ITE Max-Flex™† flange-mounted variable depth
operating handle for disconnect switches and circuit
breakers, as well as some fixed depth operators for
disconnect switches.
5. Square D† Class 9422 disconnect switches with
flange mounted variable depth operating mechanisms
and Class 9422 flange-mounted variable depth
operating mechanisms or cable mechanisms for
circuit breakers.
6. ABB Controls† flange-mounted variable depth
operating mechanisms for disconnect switches
and circuit breakers.
Important Note
Door closing hardware, handle,latching bar, latching bar bracket
interlock, hardware and instruction sheet to locate and install
disconnects are furnished with enclosure.
Disconnect switch (or circuit breaker), operating handle and
operating mechanism are not furnished with enclosure, see
disconnect ordering information pages 301 - 306
Disconnect Encl.
† Marks are the property of their respective owners.
299 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Wall-Mount Enclosures - Type 4 & 4X Premier™ Series with 2-Point or 3-Point Locking
Illustration Sheet and Catalog Number
Enclosure Enclosure Size Panel Panel Size Mounting
Door Body Height x Width x Depth Gauge Gauge A x B x C Catalog H x W D x E J
Catalog Number in. in. in. mm Number in. mm in. mm in. mm
DSC20228 2020P
DSC20228SS4 14 16 20.00 x 22.00 x 8.00 508 x 559 x 203 2020PSS4 18.00 x 18.00 457 x 457 18.50 x 20.37 470 x 518 5.0 127
DSC20228SS6 --
DSC24228 2420P
DSC24228SS4 14 16 24.00 x 22.00 x 8.00 610 x 559 x 203 2420PSS4 22.00 x 18.00 559 x 457 22.50 x 20.37 572 x 518 6.0 153
DSC24228SS6 --
DSC24268 2424P
DSC24268SS4 14 16 24.00 x 26.00 x 8.00 610 x 660 x 203 2424PSS4 22.00 x 22.00 559 x 559 22.50 x 24.37 572 x 619 6.0 153
DSC24268SS6 --
DSC30268 3024P
DSC30268SS4 14 16 30.00 x 26.00 x 8.00 762 x 660 x 203 3024PSS4 28.00 x 22.00 711 x 559 28.50 x 24.37 724 x 619 6.0 153
DSC30268SS6 --
DSC36268 3624P
DSC36268SS4 14 14 32.00 x 26.00 x 8.00 914 x 660 x 203 3624PSS4 34.00 x 22.00 864 x 559 34.50 x 24.37 876 x 619 6.0 153
DSC36268SS6 --
DSC36328 3630P
DSC36328SS4 14 14 36.00 x 32.00 x 8.00 914 x 813 x 203 3630PSS4 34.00 x 28.00 864 x 711 34.50 x 30.37 869 x 771 6.0 153
DSC36328SS6 --
DSC363212 3630P
DSC363212SS4 14 14 36.00 x 32.00 x 12.00 914 x 813 x 305 3630PSS4 34.00 x 28.00 864 x 711 34.50 x 30.37 869 x 771 6.0 153
DSC363212SS6 --
DSC423212 4230P
DSC423212SS4 14 14 42.00 x 32.00 x 12.00 1067 x 813 x 305 4230PSS4 40.00 x 28.00 1016 x 711 40.50 x 30.37 1029 x 771 21.0 53
DSC423212SS6 --
DSC423812 4236P
DSC423812SS4 14 14 42.00 x 38.00 x 12.00 1067 x 965 x 305 4236PSS4 40.00 x 34.00 1016 x 864 40.50 x 36.37 1029 x 924 21.0 53
DSC423812SS6 --
DSC483812 4836P
DSC483812SS4 14 14 48.00 x 38.00 x 12.00 1219 x 965 x 305 4836PSS4 46.00 x 34.00 1168 x 864 46.50 x 36.37 1181 x 924 24.0 610
DSC483812SS6 --
DSC603812 6036P
DSC603812SS4 14 14 60.00 x 38.00 x 12.00 1524 x 965 x 305 6036PSS4 58.00 x 34.00 1473 x 864 58.50 x 36.37 1486 x 924 30.0 762
DSC603812SS6 --
DSC423816 4236P
DSC423816SS4 14 14 42.00 x 38.00 x 16.00 1067 x 965 x 406 4236PSS4 40.00 x 34.00 1016 x 864 40.50 x 36.37 1029 x 924 21.0 53
DSC423816SS6 --
DSC483816 4836P
DSC483816SS4 14 14 48.00 x 38.00 x 16.00 1219 x 965 x 406 4836PSS4 46.00 x 34.00 1168 x 864 46.50 x 36.37 1181 x 924 24.0 610
DSC483816SS6 --
DSC603816 6036P
DSC603816SS4 14 14 60.00 x 38.00 x 16.00 1524 x 965 x 406 6036PSS4 58.00 x 34.00 1473 x 864 58.50 x 36.37 1486 x 924 30.0 762
DSC603816SS6 --
Painted Steel - Part Number alone. Stainless Steel 304 - Part Number with SS4. Stainless Steel 316 - Part Number with SS6.
A
body
opening
A - 1.75
(44)
B
C
J
X
X
D
E
H
W
body opening
B - 3.62
(92)
.80
(20)
2.75
(70)
3.37
(86)
3.88
(98)
1.12
(28)
.81
(13)
2.62
(67)
.75
(19)
mounting holes
ø.50
(13)
order
panel
separately
Section X-X
Disconnect Encl.
300 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Wall-Mount Enclosures
Disconnect Ordering Information
Allen-Bradley †
B
C
panel
panel
this area
represents
disconnect
switch or
circuit
breaker
A
2.87
(73)
Disconnect Mounting
Location
1494V or 1494U Disconnect Mechanism
* Do not install disconnects in this depth enclosure.
The dimensional information provided in this table is derived from
information supplied by the manufacturer of the equipment to be
installed. Fit and function of all equipment should be checked before and
after installation to assure proper and safe operation and compliance with
the applicable regulations, codes and standards.
Allen-Bradley † Fuse Clip Rating Fuse C
Mechanism Amp Class (when enclosure depth is:)
for Switches Amp Volt A B8 10 12 16
in. mm in. mm in. mm in. mm in. mm in. mm
DS30 30A (non) (non) -- 5.75 146 6.37 162 2.87 73 5.25 133 9.75 248 9.75 248
DS30 30A 30A 250V H,K,R 7.12 181 6.37 162 2.87 73 5.25 133 9.75 248 9.75 248
DS30 30A 30A 600V H,K,R 9.87 251 6.37 162 2.87 73 5.25 133 9.75 248 9.75 248
DS30 30A 30A 600V J 7.12 181 6.37 162 2.87 73 5.25 133 9.75 248 9.75 248
DS30 30A 60A 250V H,K 7.87 200 6.37 162 2.87 73 5.25 133 9.75 248 9.75 248
DS30 30A 60A 600V H,K 10.37 263 6.37 162 2.87 73 5.25 133 9.75 248 9.75 248
DS30 30A 60A 600V J 7.25 184 6.37 162 2.87 73 5.25 133 9.75 248 9.75 248
DS60 60A (non) (non) -- 5.87 149 6.37 162 2.75 70 5.12 130 9.62 244 9.62 244
DS60 60A 60A 250V H,K,R 8.00 203 6.37 162 2.75 70 5.12 130 9.62 244 9.62 244
DS60 60A 60A 600V H,K,R 10.50 267 6.37 162 2.75 70 5.12 130 9.62 244 9.62 244
DS60 60A 60A 600V J 7.37 187 6.37 162 2.75 70 5.12 130 9.62 244 9.62 244
DS60 60A 30A 600V H,K,R 10.00 254 6.37 162 2.75 70 5.12 130 9.62 244 9.62 244
DS60 60A 100A 250V H,K 10.50 267 6.37 162 2.75 70 5.12 130 9.62 244 9.62 244
DS60 60A 100A 600V H,K 12.50 318 6.37 162 2.75 70 5.12 130 9.62 244 9.62 244
DS60 60A 100A 600V J 9.25 235 6.37 162 2.75 70 5.12 130 9.62 244 9.62 244
DS100 100A (non) (non) -- 8.25 210 7.62 194 * * 3.62 92 8.12 206 8.12 206
DS100 100A 100A 250V H,K,R 13.87 352 7.62 194 * * 3.62 92 8.12 206 8.12 206
DS100 100A 100A 600V H,K,R 15.87 403 7.62 194 * * 3.62 92 8.12 206 8.12 206
DS100 100A 100A 600V J 12.62 321 7.62 194 * * 3.62 92 8.12 206 8.12 206
DS100 100A 200A 600V H,K 14.75 375 7.62 194 * * 3.62 92 8.12 206 8.12 206
DS100 100A 200A 600V H,K 17.25 438 7.62 194 * * 3.62 92 8.12 206 8.12 206
DS100 100A 200A 600V J 13.37 340 7.62 194 * * 3.62 92 8.12 206 8.12 206
Allen-Bradley † Circuit Breaker Type C
Mechanism for Amp (when enclosure depth is:)
Circuit Breakers Manufacturer Frame(s) AB 8 10 12 16
in. mm in. mm in. mm in. mm in. mm in. mm
M40 150A General Electric TED, THED, TEC 6.12 155 4.25 108 4.25 108 6.62 168 11.12 282 11.12 282
M40 150A Westinghouse F (series C) 5.50 140 4.25 108 4.25 108 6.62 168 11.12 282 11.12 282
M50 250A Westinghouse J (series C) 11.00 279 4.50 114 * * ** 10.62 270 10.62 270
M60 400A Westinghouse K (series C) 11.00 279 5.87 149 * * ** 10.50 267 10.50 267
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
301 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Wall-Mount Enclosures
Disconnect Ordering Information
Cutler-Hammer †
B
C
panel
panel
this area
represents
disconnect
switch or
circuit
breaker
A
2.87
(73)
Disconnect Mounting
Location
C361 Disconnect Mechanism
* Do not install disconnects in this depth enclosure.
(1) Wire bending space “C” does not allow for the maximum size cable
in some depth enclosures.
(2) Do not install 200A switch in enclosures less than 30 inches high.
The dimensional information provided in this table is derived from
information supplied by the manufacturer of the equipment to be
installed. Fit and function of all equipment should be checked before
and after installation to assure proper and safe operation and
compliance with the applicable regulations, codes and standards.
Cutler-Hammer † Fuse Clip Rating Fuse C
Mechanism Amp Class (when enclosure depth is:)
for Switches Amp Volt A B8 10 12 16
in. mm in. mm in. mm in. mm in. mm in. mm
NC 30A (non) (non) -- 6.00 152 5.75 146 3.50 89 5.75 146 10.25 260 10.25 260
SC21 30A 30A 250V H,K,R 9.00 229 5.75 146 3.50 89 5.75 146 10.25 260 10.25 260
SC61 30A 30A 600V H,K,R 9.00 229 5.75 146 3.50 89 5.75 146 10.25 260 10.25 260
SC61 30A 30A 600V J 9.00 229 5.75 146 3.50 89 5.75 146 10.25 260 10.25 260
SC61 30A 60A 250V H,K,R 9.50 241 5.75 146 3.50 89 5.75 146 10.25 260 10.25 260
ND 60A (non) (non) -- 6.00 152 5.75 146 3.50 89 5.75 146 10.25 260 10.25 260
SD22 60A 30A 600V J 9.00 229 5.75 146 3.50 89 5.75 146 10.25 260 10.25 260
SD22 60A 60A 250V H,K,R 9.50 241 5.75 146 3.50 89 5.75 146 10.25 260 10.25 260
SD62 60A 60A 600V H,K,R 9.50 241 5.75 146 3.50 89 5.75 146 10.25 260 10.25 260
SD62 60A 60A 600V J 9.00 229 5.75 146 3.50 89 5.75 146 10.25 260 10.25 260
NE 100A (non) (non) -- 6.00 152 7.12 181 3.00 76 5.37 136 9.87 251 9.87 251
SE263 100A 100A 250V H,K,R 10.62 270 7.12 181 3.00 76 5.37 136 9.87 251 9.871 251
SE263 100A 100A 600V H,K,R 10.62 270 7.12 181 3.00 76 5.37 136 9.87 251 9.871 251
SE263 100A 100A 600V J 9.37 238 7.12 181 3.00 76 5.37 136 9.87 251 9.871 251
NF (2) 200A (non) (non) -- 16.75 425 9.75 248 **** 8.00 203 8.001 203
SF264 (2) 200A 200A 250V H,K,R 16.75 425 9.75 248 **** 8.00 203 8.00 203
SF264 (2) 200A 200A 600V H,K,R 16.75 425 9.75 248 **** 8.00 203 8.00 203
SF264 (2) 200A 200A 600V J 16.75 425 9.75 248 **** 8.00 203 8.00 203
C371 Disconnect Mechanism
Cutler-Hammer † Circuit Breaker Type C
Mechanism for Amp (when enclosure depth is:)
Circuit Breakers Manufacturer Frame(s) AB 8 10 12 16
in. mm in. mm in. mm in. mm in. mm in. mm
C371E (1) 150A Cutler-Hammer HMCP,FS,FH 6.50 165 5.25 133 4.43 113 6.81 173 11.43 290 11.431 290
C371F (1) 225A Cutler-Hammer HMCP,JS,JH,JL 11.50 292 7.75 197 * * 6.75 171 11.25 286 11.251 286
C371F (1) 400A Cutler-Hammer HMCP,KS,KH 10.50 267 7.75 197 ** ** 10.75 273 10.751 273
C371G (1) 600A Cutler-Hammer LS,LH 9.75 248 11.62 295 ** ** 9.25 235 9.251 235
C371E (1) 150A Westinghouse F (series C) 6.50 165 5.25 133 4.43 113 6.81 173 11.43 290 11.431 290
C371F (1) 250A Westinghouse J (series C) 11.50 292 7.75 197 * * 6.75 171 11.25 286 11.251 286
C371F (1) 400A Westinghouse K (series C) 10.50 267 7.75 197 ** ** 10.75 273 10.751 273
C371G (1) 600A Westinghouse LA,LC 10.87 276 11.62 295 ** ** 9.25 235 9.251 235
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
302 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Wall-Mount Enclosures
Disconnect Ordering Information
General Electric †
B
C
panel
panel
this area
represents
disconnect
switch or
circuit
breaker
A
2.87
(73)
Disconnect Mounting
Location
TDA Disconnect Mechanism
* Do not install disconnects in this depth enclosure.
The dimensional information provided in this table is derived from
information supplied by the manufacturer of the equipment to be
installed. Fit and function of all equipment should be checked
before and after installation to assure proper and safe operation and
compliance with the applicable regulations, codes and standards.
General Electric † Fuse Clip Rating Fuse C
Mechanism Amp Class (when enclosure depth is:)
for Switches Amp Volt A B8 10 12 16
in. mm in. mm in. mm in. mm in. mm in. mm
TDOM1A 30A (non) (non) -- 6.31 160 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1A 30A 30A 250V H,R 6.31 160 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 30A 30A 600V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 30A 30A 250V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 30A 60A 600V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1A 60A (non) (non) -- 6.31 160 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 60A 60A 250V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 60A 60A 600V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 60A 100A 250V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 60A 100A 600V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1A 100A (non) (non) -- 6.31 160 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 100A 100A 250V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 100A 100A 600V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 100A 200A 250V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM1B 100A 200A 600V H,R 10.93 278 5.00 127 6.18 157 7.62 194 12.12 308 12.12 308
TDOM2 200A (non) (non) -- 9.12 232 8.87 225 ** ** 9.50 241 9.50 241
TDOM2 200A 200A 250V H,R 17.50 445 8.87 225 ** ** 9.50 241 9.50 241
TDOM2 200A 200A 600V H,R 17.50 445 8.87 225 ** ** 9.50 241 9.50 241
General Electric † C
Mechanism for Amp Circuit Breaker Type (when enclosure depth is:)
Circuit Breakers AB 8 10 12 16
in. mm in. mm in. mm in. mm in. mm in. mm
TDOM1A 150A TEB,TEC,TED,THED 6.43 163 5.00 127 6.06 154 7.50 191 12.06 306 12.06 306
TDOM1B 150A TBI,TEC,TECL 11.06 281 5.00 127 6.06 154 7.50 191 12.06 306 12.06 306
TDOM1C 150A TEL 6.43 163 5.00 127 6.06 154 7.50 191 12.06 306 12.06 306
TDOM1D 150A THLCI 9.75 248 5.00 127 * * 5.12 130 9.62 244 9.62 244
TDOM3 225A TFJ,TFK,THFK,TFL 11.43 290 5.50 127 * * 6.06 154 10.62 270 10.62 270
TDOM4 400A TJJ,TJK4,THJK4,TJL4V 10.25 260 9.12 232 * * 5.12 130 9.68 246 9.68 246
TDOM4 600A TJK6,THJK6,TJ4V,TJL4V 10.25 260 9.12 232 * * 5.12 130 9.68 246 9.68 246
TDOM5 400A TB4,TJH6S 16.25 413 9.12 232 * * 5.12 130 9.68 246 9.68 246
TDOM6 225A TLB2,THLC2 14.25 362 9.12 232 ** ** 9.12 232 9.12 232
TDOM6 400A TLB4,THLC4 15.62 397 9.12 232 ** ** 7.75 197 7.75 197
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
303 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Wall-Mount Enclosures
Disconnect Ordering Information
I-T-E Siemens® †
Encl. I-T-E † Mechanism Cable Amp Circuit Breaker A(1) B(2)
Depth for Circuit Breaker Length Frame device nominal min max device max
in. mm in. mm in. mm in. mm in. mm in. mm
FHOE036 36 125A ED,HED,ED6ETI 6.37 162 10.12 257 1.25 32 21.00 533 3.00 76 14.50 368
FHOE036 36 125A CED6ETI 8.50 216 13.25 337 4.50 114 24.25 616 3.00 76 14.50 368
FHOF036 36 250A FD,HFD,FXD,FXDETI 9.50 241 10.37 263 1.00 25 21.25 540 4.50 114 13.00 330
FHOF036 36 250A CFD,CFDETI 14.12 359 15.00 381 3.12 79 21.25 540 4.50 114 13.00 330
8 FHOJ036 36 400A JD,HJD,JXD2,JXD6 11.00 279 10.00 254 1.12 28 20.87 530 7.50 191 14.50 368
FHOJ036 36 400A SJD,SHJD,JXD6ETI 11.00 279 10.00 254 1.12 28 20.87 530 7.50 191 14.50 368
FHOJ036 36 400A CJD,SCJD,CJD6ETI 17.87 454 16.87 428 6.75 171 26.50 673 7.50 191 14.50 368
FHOJ036 36 600A LD,LXD,HLD 11.00 279 10.00 254 1.12 28 20.87 530 7.50 191 14.50 368
FHOJ036 36 600A SLD,SHLD,LXD6ETI 11.00 279 10.00 254 1.12 28 20.87 530 7.50 191 14.50 368
FHOJ036 36 600A CLD,SCLD,CLD6ETI 17.87 454 16.87 428 6.75 171 26.50 673 7.50 191 14.50 368
FHOE036 36 125A ED,HED,ED6ETI 6.37 162 12.50 318 2.62 67 22.87 581 3.00 76 14.25 362
FHOE036 36 125A CED6ETI 8.50 216 16.62 422 5.87 149 26.12 663 3.00 76 14.25 362
FHOF036 36 250A FD,HFD,FXD,FXDETI 9.50 241 12.75 324 2.87 73 23.12 587 4.50 114 12.75 324
FHOF036 36 250A CFD,CFDETI 14.12 359 17.37 441 5.50 140 28.00 711 4.50 114 12.75 324
10 FHOJ036 36 400A JD,HJD,JXD2,JXD6 11.00 279 12.37 314 2.50 64 22.75 578 7.50 191 14.25 362
FHOJ036 36 400A SJD,SHJD,JXD6ETI 11.00 279 12.37 314 2.50 64 22.75 578 7.50 191 14.25 362
FHOJ036 36 400A CJD,SCJD,CJD6ETI 17.87 454 19.25 489 9.37 238 29.62 160 7.50 191 14.25 362
FHOJ036 36 600A LD,LXD,HLD 11.00 279 12.37 314 2.50 64 22.75 578 7.50 191 14.25 362
FHOJ036 36 600A SLD,SHLD,LXD6ETI 11.00 279 12.37 314 2.50 64 22.75 578 7.50 191 14.25 362
FHOJ036 36 600A CLD,SCLD,CLD6ETI 17.87 454 19.25 489 9.37 238 29.62 160 7.50 191 14.25 362
FHOE036 36 125A ED,HED,ED6ETI 6.37 162 17.00 432 6.37 162 27.50 699 3.00 76 13.75 349
FHOE036 36 125A CED6ETI 8.50 216 19.87 505 9.62 244 30.37 771 3.00 76 13.75 349
FHOF036 36 250A FD,HFD,FXD,FXDETI 9.50 241 17.25 438 6.62 168 27.37 695 4.50 114 12.25 311
FHOF036 36 250A CFD,CFDETI 14.12 359 21.87 555 11.37 289 32.12 816 4.50 114 12.25 311
12 FHOJ036 36 400A JD,HJD,JXD2,JXD6 11.00 279 16.87 428 6.25 159 26.87 682 7.50 191 13.75 349
FHOJ036 36 400A SJD,SHJD,JXD6ETI 11.00 279 16.87 428 6.25 159 26.87 682 7.50 191 13.75 349
FHOJ036 36 400A CJD,SCJD,CJD6ETI 17.87 454 23.75 603 13.12 333 33.87 860 7.50 191 13.75 349
FHOJ036 36 600A LD,LXD,HLD 11.00 279 16.87 428 6.25 159 26.87 682 7.50 191 13.75 349
FHOJ036 36 600A SLD,SHLD,LXD6ETI 11.00 279 16.87 428 6.25 159 26.87 682 7.50 191 13.75 349
FHOJ036 36 600A CLD,SCLD,CLD6ETI 17.87 454 23.75 603 13.12 333 33.87 860 7.50 191 13.75 349
FHOE036 36 125A ED,HED,ED6ETI 6.37 162 17.00 432 7.75 197 26.50 673 3.00 76 11.50 292
FHOE036 36 125A CED6ETI 8.50 216 19.87 505 11.12 282 29.87 759 3.00 76 11.50 292
FHOF036 36 250A FD,HFD,FXD,FXDETI 9.50 241 17.25 438 8.12 206 26.87 682 4.50 114 10.00 254
FHOF036 36 250A CFD,CFDETI 14.12 359 21.87 555 13.00 330 31.62 803 4.50 114 10.00 254
16 FHOJ036 36 400A JD,HJD,JXD2,JXD6 11.00 279 16.87 428 7.62 194 26.37 670 7.50 191 11.50 292
FHOJ036 36 400A SJD,SHJD,JXD6ETI 11.00 279 16.87 428 7.62 194 26.37 670 7.50 191 11.50 292
FHOJ036 36 400A CJD,SCJD,CJD6ETI 17.87 454 23.75 603 14.62 371 33.37 848 7.50 191 11.50 292
FHOJ036 36 600A LD,LXD,HLD 11.00 279 16.87 428 7.62 194 26.37 670 7.50 191 11.50 292
FHOJ036 36 600A SLD,SHLD,LXD6ETI 11.00 279 16.87 428 7.62 194 26.37 670 7.50 191 11.50 292
FHOJ036 36 600A CLD,SCLD,CLD6ETI 17.87 454 23.75 603 14.62 371 33.37 848 7.50 191 11.50 292
B max
panel
panel
this area
represents
disconnect
switch or
circuit
breaker
A min
A max
2.87
(73)
Disconnect
Mounting Location
MAX-FLEX Disconnect Mechanism
(1) Flexible operating cable allows disconnect to be mounted within
minimum and maximum of “A” dimension when “B” is min. (2.87).
(2) Flexible operating cable allows disconnect to be mounted within
minimum, (2.87) and maximum of “B” dimension when “A” is
nominal.
The dimensional information provided in this table is derived from
information supplied by the manufacturer of the equipment to be
installed. Fit and function of all equipment should be checked
before and after installation to assure proper and safe operation and
compliance with the applicable regulations, codes and standards.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
304 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Wall-Mount Enclosures
Disconnect Ordering Information
Square D® †
B
C
panel
panel
this area
represents
disconnect
switch or
circuit
breaker
A
2.87
(73)
Disconnect Mounting
Location
9422 Disconnect Mechanism
* Do not install disconnects in this depth enclosure.
The dimensional information provided in this table is derived from
information supplied by the manufacturer of the equipment to be
installed. Fit and function of all equipment should be checked
before and after installation to assure proper and safe operation
and compliance with the applicable regulations, codes and
standards.
Square D † Fuse Clip Rating Fuse C
Mechanism Amp Class (when enclosure depth is:)
for Switches Amp Volt A B8 10 12 16
in. mm in. mm in. mm in. mm in. mm in. mm
RC-1 30A (non) (non) -- 3.37 86 6.87 174 4.62 117 7.00 178 11.50 292 11.50 292
RC-2 30A 30A 250V H,K,R 5.12 130 6.87 174 4.62 117 7.00 178 11.50 22 11.50 292
RC-3 30A 30A 600V H,K,R 8.12 206 6.87 174 4.62 117 7.00 178 11.50 292 11.50 292
RC-3 30A 30A 600V J 5.12 130 6.87 174 4.62 117 7.00 178 11.50 292 11.50 292
RC-3 30A 60A 250V H,K,R 6.12 155 6.87 174 4.62 117 7.00 178 11.50 292 11.50 292
TC-1 30A (non) (non) -- 7.75 197 5.75 146 3.12 79 5.12 130 10.50 267 10.50 267
TC-2 30A 30A 250V H,K,R 7.75 197 5.75 146 3.12 79 5.12 130 10.50 267 10.50 267
TC-3 30A 30A 600V H,K,R 7.75 197 5.75 146 3.12 79 5.12 130 10.50 267 10.50 267
TC-3 30A 30A 600V J 7.75 197 5.75 146 3.12 79 5.12 130 10.50 267 10.50 267
TC-3 30A 60A 250V H,K,R 7.75 197 5.75 146 3.12 79 5.12 130 10.50 267 10.50 267
TD-1 60A (non) (non) -- 9.50 241 6.37 162 3.62 92 6.00 152 10.50 267 10.50 267
TD-2 60A 30A 600V H,K,R 9.50 241 6.37 162 3.62 92 6.00 152 10.50 267 10.50 267
TD-2 60A 60A 250V H,K,R 7.62 194 6.37 162 3.62 92 6.00 152 10.50 267 10.50 267
TD-3 60A 60A 600V H,K,R 10.12 257 6.37 162 3.62 92 6.00 152 10.50 267 10.50 267
TD-3 60A 60A 600V J 7.62 194 6.37 162 3.62 92 6.00 152 10.50 267 10.50 267
TE-1 100A (non) (non) -- 6.12 155 8.12 206 * * 5.75 146 10.25 260 10.25 260
TE-2 100A 100A 250V H,K,R 8.87 225 8.12 206 * * 5.75 146 10.25 260 10.25 260
TE-2 100A 100A 600V H,K,R 10.87 276 8.12 206 * * 5.75 146 10.25 260 10.25 260
TE-2 100A 100A 600V J 7.62 194 8.12 206 * * 5.75 146 10.25 260 10.25 260
TE-3 100A 200A 600V J 15.12 384 8.12 206 * * 5.75 146 10.25 260 10.25 260
TF-1 200A (non) (non) -- 8.25 210 11.37 289 ** ** 8.87 225 8.87 225
TF-2 200A 200A 250V H,K,R 14.25 362 11.37 289 ** ** 8.87 225 8.87 225
TF-2 200A 200A 600V H,K,R 16.75 425 11.37 289 ** ** 8.87 225 8.87 225
TF-2 200A 200A 600V J 12.87 327 11.37 289 ** ** 8.87 225 8.87 225
TF-3 200A 400A 600V J 17.25 438 11.37 289 ** ** 8.87 225 8.87 225
Square D † Circuit Breaker Type C
Mechanism for Amp (when enclosure depth is:)
Circuit Breakers AB 8 10 12 16
in. mm in. mm in. mm in. mm in. mm in. mm
RN-1 100A FAL,FHL,FCL 6.12 155 4.25 108 3.75 95 6.12 155 10.62 270 10.62 270
RP-1 250A KAL,KHL,KCL 7.37 187 4.25 108 * * 6.87 174 11.37 289 11.37 289
RR-1 400A LAL,LHL,Q4L 12.25 311 4.50 114 ** ** 7.00 178 7.00 178
RR-2 400A ILL 11.12 282 5.87 149 ** ** 11.37 289 11.37 289
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
305 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Wall-Mount Enclosures
Disconnect Ordering Information
ALLEN-BRADLEY †
Standard enclosure designed to accept variable depth
type 1494V / 1494U.
Allen-Bradley† 1494V / 1494U disconnect switch:
1. Disconnect switch and operating mechanism.
2. Operating handle.
3. Trailer fuse block kit, (if required).
4. Fuse clip kit, (if required).
5. Line and load connectors, (if necessary).
6. Door hardware: 2-pt latching mechanism
or 3-pt latching mechanism.
Allen-Bradley† 1494V / 1494U circuit breaker:
1. Circuit breaker.
2. Operating mechanism.
3. Operating handle.
4. Door hardware: 2-pt latching mechanism
or 3-pt latching mechanism.
CUTLER-HAMMER †
Standard enclosures designed to accept variable depth
types C361 and C371.
Cutler-Hammer† C361 disconnect switch:
1. Disconnect switch and operating mechanism.
2. Operating handle.
3. Door hardware: 2-pt latching mechanismor 3-pt
latching mechanism.
Cutler-Hammer† C371 circuit breaker:
1. Circuit breaker.
2. Operating mechanism.
3. Operating handle.
4. Door hardware: 2-pt latching mechanism or 3-pt
latching mechanism.
GENERAL ELECTRIC †
Standard enclosures designed to accept variable
depth type TDA.
General Electric† TDA disconnect switch:
1. Disconnect switch (QMR, QMW) and variable depth
operating mechanism.
2. Operating handle.
3. Fuse clip kit or no fuse kit, (if required).
4. Door hardware: 2-pt latching mechanism or 3-pt
latching mechanism.
General Electric† TDA circuit breaker:
1. Circuit breaker.
2. Variable depth operating mechanism.
3. Operating handle.
4. Door hardware: 2-pt latching mechanism or 3-pt
latching mechanism.
I-T-E SIEMENS †
Standard enclosures designed to accept MAX-FLEX
type FHO.
I-T-E Siemens† MAX-FLEX† circuit breaker:
1. Circuit Breaker.
2. Operating mechanism.
3. Operating handle FHOH.
4. Line and load connectors, (if necessary).
5. Operating cable (standard 36 inch).
6. Door hardware: 2-pt latching mechanism or
3-pt latching mechanism.
SQUARE D †
Standard enclosures designed to accept variable depth
type 9422.
Square D† 9422 disconnect switch:
1. Disconnect switch and operating mechanism.
2. Operating handle.
3. Door hardware: 2-pt latching mechanism or
3-pt latching mechanism.
Square D† 9422 circuit breaker:
1. Circuit breaker.
2. Operating mechanism.
3. Operating handle.
4. Door hardware: 2-pt latching mechanism or
3-pt latching mechanism.
Important Note
When ordering flange-mounted disconnect equipment be sure
to include all the necessary components.
1. Latching bar, latching bar bracket interlock and hardware
are furnished with the enclosure.
2. Disconnects and related components are available from the
manufacturer, see pages 301 - 306.
Notes: Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
306 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Ground-Mount Enclosures
Type 12 Center & Flange-Mount Floor-Standing with 3-Point Locking
Data Sheet
Construction
• Enclosure and door are fabricated from (12) gauge steel
• All continuous welded seams are finished smooth
• Doors are secured to the body with removable concealed
hinges and a center locating 3-point key-locking and padlock
handle mechanism
• Modern bevel profile on hinge side of enclosure doors
• Right-side door serves as the master door on the flange mount
disconnect type with a defeater mechanism which requires a
screwdriver to open
• Left-side door serves as the master door on the center post
disconnect type with a defeater mechanism which requires a
flat screwdriver to open
• Slave doors cannot open without activating mechanical
interlock but can close in any order
• Universal opening on either the right side flange or the center
post will accommodate most disconnect operators when used
with operator adapters, (order separately) see page 451
• Print pocket provided
• Doors have an oil-resistant gasket
• Ground studs provided on doors and body
• Lighting mounting channel provided
• Removable center post allows for easy access and
panel installation
• Heavy-gauge angle supports and .375-16 collar studs are
provided for optional panel mounting
• Large lifting eyebolts are supplied
• Mounting legs are provided for floor mounting
Discount Schedule: C2
Subclass: DOC
Application
• Houses electrical controls and instruments
• Protects against circulating dust, falling dirt and
dripping noncorrosive liquids
Standards
• UL 508A listed, Type 12
• CSA C22.2 No.94 certified, Type 12
• Conforms to NEMA standard for Type 12
Finish
• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
Accessories
• Panels
• Channel mounting hardware
• Blank adapter plates
• Operator adapters
• Leg stabilizer kit
• Touch-up paint
• Replacement handles: defeater handle BD-PDHB and
keyed handle BD-PKHB (see pages 428 & 429).
• See Accessories section
Discount Schedule: C2
Subclass: DO0
Important Note
When ordering flange or center-mounted disconnect
enclosures, be sure to include all the necessary
components.
1. A flange or center-mounted enclosure
2. A panel (optional)
3. Operator adapter plates MUST be ordered for the
specific brand and type of disconnect being used,
(see page 451)
Disconnect switch (or circuit breaker), operating handle and
operating mechanism are not furnished with enclosure, see
disconnect ordering information, pages 312 - 319.
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements
Disconnect Encl.
307 B-Line series electrical enclosures Eaton
Disconnect Enclosures
CD606012-12FD
FD606012-12FD
Ground-Mount Enclosures
Type 12 Center & Flange-Mount Floor-Standing with 3-Point Locking
Catalog Number
Enclosure Enclosure Size Panel Panel Size
Height x Width x Depth
A x B x C Height x Width
Catalog Number in. mm Catalog Number in. mm
CD604812-12FD 60.00 x 48.12 x 12.00 1524 x 1222 x 305 AW6048P 55.87 x 43.87 1419 x 1114
CD606012-12FD 60.00 x 60.12 x 12.00 1524 x 1527 x 305 AW6060P 55.87 x 55.87 1419 x 1419
CD726012-12FD 72.00 x 60.12 x 12.00 1829 x 1527 x 305 AW7260P 67.87 x 55.87 1724 x 1419
CD727212-12FD 72.00 x 72.12 x 12.00 1829 x 1832 x 305 AW7272P 67.87 x 67.87 1724 x 1419
CD727218-12FD 72.00 x 72.12 x 18.00 1829 x 1832 x 305 AW7272P 67.87 x 67.87 1724 x 1724
Flange-Mounted
Enclosure Enclosure Size Panel Panel Size
Height x Width x Depth
A x B x C Height x Width
Catalog Number in. mm Catalog Number in. mm
FD604912-12FD 60.00 x 49.00 x 12.00 1524 x 1245 x 305 AW6048P 55.87 x 43.87 1419 x 1114
FD606112-12FD 60.00 x 61.00 x 12.00 1524 x 1549 x 305 AW6060P 55.87 x 55.87 1419 x 1419
FD726112-12FD 72.00 x 61.00 x 12.00 1829 x 1549 x 305 AW7260P 67.87 x 55.87 1724 x 1419
FD727312-12FD 72.00 x 73.00 x 12.00 1829 x 1854 x 305 AW7272P 67.87 x 67.87 1724 x 1724
FD604918-12FD 60.00 x 49.00 x 18.00 1524 x 1245 x 457 AW6048P 55.87 x 43.87 1419 x 1114
FD606118-12FD 60.00 x 61.00 x 18.00 1524 x 1549 x 457 AW6060P 55.87 x 55.87 1419 x 1419
FD726118-12FD 72.00 x 61.00 x 18.00 1829 x 1549 x 457 AW7260P 67.87 x 55.87 1724 x 1419
FD727318-12FD 72.00 x 73.00 x 18.00 1829 x 1854 x 457 AW7272P 67.87 x 67.87 1724 x 1724
FD727324-12FD 72.00 x 73.00 x 24.00 1829 x 1854 x 610 AW7272P 67.87 x 67.87 1724 x 1724
Center-Mounted
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
308 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Disconnect Encl.
Ground-Mount Enclosures
Type 12 Center & Flange-Mount Floor-Standing with 3-Point Locking
Illustration Sheet
B ID C ID
X X
A ID
B-2.75
(70)
A-2.75
(70)
C-1.13
(29)
C+0.30
(7)
rotation
print pocket
(supplied)
rotation
center disconnect opening
3-point padlock
handle
mounting leg
lighting channel
lighting channel
collar stud
removable
center post
panel support
lifting eye
ID = Inside Dimension
Section X-X
Front View
Side View
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
309 B-Line series electrical enclosures Eaton
Disconnect Enclosures
12.00
(305)
Disconnect Encl.
Ground-Mount Enclosures
Type 12 Center & Flange-Mount Floor-Standing with 3-Point Locking
Illustration Sheet
B-4.70
(120) B/2-4.48
(113)
A-2.75
(70)
rotation rotation
3-point padlock
handle
flange
disconnect
opening
mounting leg
grounding &
bonding
provisions for
body & door
print pocket
(supplied)
lighting channel
lighting channel
collar stud
body stiffeners
removable center
post
panel
support
lifting eye
Section X-X
X X
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Two lifting eyes are furnished when C dimension is 24” (610 mm) or less.
Front View Side View
310 Eaton B-Line series electrical enclosures
Disconnect Enclosures
B ID C ID
A ID
ID = Inside Dimension
C-1.13
(29)
C+0.30
(7)
12.00
(305)
Disconnect Encl.
Ground-Mount Enclosures
Type 12 Center & Flange-Mount Floor-Standing with 3-Point Locking
Illustration Sheet
D
C
E
A A
C
D+E+1.50
(38)
panel
(see note)
panel
(see note)
see universal
opening detail
see universal
opening detail
panel
(see note)
this area
represents
disconnect
switch or
circuit
breaker
this area
represents
disconnect
switch or
circuit
breaker
B B
2.50
(64)
1.12
(28)
9.93
(252)
9.31
(236)
1.62
(41)
.28 D
(7)
(TYP)
2.75
(70)
1.37
(35)
1.37
(35)
The dimensional information provided in these drawings is derived
from information supplied by the manufacturer of the equipment to
be installed. Fit and function of all equipment should be checked
before and after installation to assure proper and safe operation and
compliance with the applicable regulations, codes and standards.
Universal opening must be filled with an operator adapter kit for
the specific brand and type of disconnect being used, (see page
451).
Flange Mounting Center Post Mounting
Universal Opening Detail
CL
Important Note
When ordering flange or center-mounted disconnect
enclosures, be sure to include all the necessary
components.
1. A flange or center-mounted enclosure
2. A panel (optional)
3. Operator adapter plates MUST be ordered for the
specific brand and type of disconnect being used,
(see page 451)
Disconnect switch (or circuit breaker), operating handle and
operating mechanism are not furnished with enclosure, see
disconnect ordering information, pages 312 - 319.
Notes: Refer to disconnect tables for associated dimensions. Panels are ordered separately. Refer to catalog table for size and ordering information.
Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
311 B-Line electrical enclosures Eaton
Disconnect Enclosures
Floor-Standing Enclosures
Disconnect Ordering Information
Allen-Bradley® †
1494V or 1494U Disconnect Mechanism
* Do not install disconnects in this height enclosure.
(1) Dimension “D” does not include space for auxiliary switches.
The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed. Fit and
function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the applicable
regulations, codes and standards.
Allen-Bradley† Fuse Clip Rating Fuse Enclosure Height
Mechanism Amp Class 60 72 C D(1) E
for Switches Amp Volt A BA B
in. mm in. mm in. mm in. mm in. mm in. mm in mm
DS30 30A (non) (non) -- 7.87 200 6.00 152 13.37 340 11.50 292 4.00 102 6.75 171 .25 6
DS30 30A 30A 250V H,K,R 7.87 200 6.00 152 13.37 340 11.50 292 5.25 133 6.75 171 .25 6
DS30 30A 30A 600V H,K,R 7.87 200 6.00 152 13.37 340 11.50 292 8.00 203 6.75 171 .25 6
DS30 30A 30A 600V J 7.87 200 6.00 152 13.37 340 11.50 292 5.25 133 6.75 171 .25 6
DS30 30A 60A 250V H,K 7.87 200 6.00 152 13.37 340 11.50 292 6.00 152 6.75 171 .25 6
DS30 30A 60A 600V H,K 7.87 200 6.00 152 13.37 340 11.50 292 8.50 216 6.75 171 .25 6
DS30 30A 60A 600V J 7.87 200 6.00 152 13.37 340 11.50 292 5.50 140 6.75 171 .25 6
DS60 60A (non) (non) -- 7.87 200 5.87 149 13.37 340 11.37 289 4.00 102 6.75 171 .25 6
DS60 60A 30A 600V H,K,R 7.87 200 5.87 149 13.37 340 11.37 289 8.00 203 6.75 171 .25 6
DS60 60A 60A 250V H,K,R 7.87 200 5.87 149 13.37 340 11.37 289 6.00 152 6.75 171 .25 6
DS60 60A 60A 600V H,K,R 7.87 200 5.87 149 13.37 340 11.37 289 8.50 216 6.75 171 .25 6
DS60 60A 60A 600V J 7.87 200 5.87 149 13.37 340 11.37 289 5.50 140 6.75 171 .25 6
DS60 60A 100A 250V H,K 7.87 200 5.87 149 13.37 340 11.37 289 8.50 216 6.75 171 .25 6
DS60 60A 100A 600V H,K 7.87 200 5.87 149 13.37 340 11.37 289 10.50 267 6.75 171 .25 6
DS60 60A 100A 600V J 7.87 200 5.87 149 13.37 340 11.37 289 7.25 184 6.75 171 .25 6
DS100 100A (non) (non) -- 7.87 200 4.37 111 13.37 340 9.87 251 4.75 121 8.00 203 .25 6
DS100 100A 100A 250V H,K,R 7.87 200 4.37 111 13.37 340 9.87 251 10.50 267 8.00 203 .25 6
DS100 100A 100A 600V H,K,R 7.87 200 4.37 111 13.37 340 9.87 251 12.50 318 8.00 203 .25 6
DS100 100A 100A 600V J 7.87 200 4.37 111 13.37 340 9.87 251 9.25 235 8.00 203 .25 6
DS100 100A 200A 250V H,K 7.87 200 4.37 111 13.37 340 9.87 251 11.25 286 8.00 203 .25 6
DS100 100A 200A 600V H,K 7.87 200 4.37 111 13.37 340 9.87 251 13.75 349 8.00 203 .25 6
DS100 100A 200A 600V J 7.87 200 4.37 111 13.37 340 9.87 251 10.00 254 8.00 203 .25 6
DS200 200A (non) (non) -- * * ** 11.93 303 7.50 191 10.00 254 11.00 279 .25 6
DS200 200A 200A 250V H,K,R * * ** 11.93 303 7.50 191 15.00 381 11.00 279 .25 6
DS200 200A 200A 600V H,K,R * * ** 11.93 303 7.50 191 17.25 438 11.00 279 .25 6
DS200 200A 200A 600V J ** * * 11.93 303 7.50 191 13.50 343 11.00 279 .25 6
DS200 200A 400A 250V H,K * * ** 11.93 303 7.50 191 15.75 400 11.00 279 .25 6
DS200 200A 400A 600V H,K * * ** 11.93 303 7.50 191 18.75 476 11.00 279 .25 6
DS200 200A 400A 600V J ** * * 11.93 303 7.50 191 14.25 362 11.00 279 .25 6
Allen-Bradley† Circuit Breaker Type Enclosure Height
Mechanism for Amp 60 72 C D(1) E
Circuit Breakers Manufacturer Frame(s) A BA B
in. mm in. mm in. mm in. mm in. mm in. mm in mm
M40 150A General Electric TED,THED,TEC 7.87 200 7.25 184 13.37 340 12.75 324 5.75 146 4.75 121 .25 6
M40 150A Westinghouse F (series C) 7.87 200 7.25 184 13.37 340 12.75 324 5.00 127 4.75 121 .25 6
M50 250A Westinghouse J (series C) 7.87 200 6.87 174 13.37 340 12.37 324 9.75 248 5.00 127 .25 6
M60 400A Westinghouse K (series C) * * ** 13.37 340 12.37 324 9.75 248 6.25 159 .25 6
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
312 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Floor-Standing Enclosures
Disconnect Ordering Information
Allen-Bradley® †
* Do not install disconnects in this height enclosure.
(1) Dimension “D” does not include space for auxiliary switches.
The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed. Fit and
function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the applicable
regulations, codes and standards.
1494F Disconnect Mechanism
Allen-Bradley† Fuse Clip Rating Fuse Enclosure Height
Mechanism Amp Class 60 72 C D(1) E
Switches Amp Volt A BA B
in. mm in. mm in. mm in. mm in. mm in. mm in mm
N30 30A (non) (non) -- 5.87 149 5.37 136 11.37 289 10.87 276 4.75 121 6.50 165 .75 19
NF30 30A 30A 250V H,K,R 5.87 149 5.37 136 11.37 289 10.87 276 6.50 165 6.50 165 .75 19
NF30 30A 30A 600V H,K,R 5.87 149 5.37 136 11.37 289 10.87 276 9.25 235 6.50 165 .75 19
NF30 30A 30A 600V J 5.87 149 5.37 136 11.37 289 10.87 276 6.50 165 6.50 165 .75 19
NF30 30A 60A 250V H,K,R 5.87 149 5.37 136 11.37 289 10.87 276 7.25 184 6.50 165 .75 19
NF30 30A 60A 600V H,K,R 5.87 149 5.37 136 11.37 289 10.87 276 9.75 248 6.50 165 .75 19
NF30 30A 60A 600V J 5.87 149 5.37 136 11.37 289 10.87 276 6.75 171 6.50 165 .75 19
N60 60A (non) (non) -- 5.87 149 4.62 117 11.37 289 10.12 257 4.75 121 6.50 165 .75 19
NF60 60A 30A 600V H,K,R 5.87 149 4.62 117 11.37 289 10.12 257 10.50 267 6.50 165 .75 19
NF60 60A 60A 250V H,K,R 5.87 149 4.62 117 11.37 289 10.12 257 8.50 216 6.50 165 .75 19
NF60 60A 60A 600V H,K,R 5.87 149 4.62 117 11.37 289 10.12 257 11.00 279 6.50 165 .75 19
NF60 60A 60A 600V J 5.87 149 4.62 117 11.37 289 10.12 257 7.75 197 6.50 165 .75 19
NF60 60A 100A 250V H,K,R 5.87 149 4.62 117 11.37 289 10.12 257 11.00 279 6.50 165 .75 19
NF60 60A 100A 600V H,K,R 5.87 149 4.62 117 11.37 289 10.12 257 13.00 330 6.50 165 .75 19
NF60 60A 100A 600V J 5.87 149 4.62 117 11.37 289 10.12 257 9.75 248 6.50 165 .75 19
N100 100A (non) (non) -- * * ** 11.37 289 8.25 210 4.75 121 7.25 184 .75 19
NF100 100A 100A 250V H,K,R * * ** 11.37 289 8.25 210 11.50 292 7.50 191 .75 19
NF100 100A 100A 600V H,K,R * * ** 11.37 289 8.25 210 13.50 343 7.50 191 .75 19
NF100 100A 100A 600V J * * ** 11.37 289 8.25 210 10.25 260 7.50 191 .75 19
NF100 100A 200A 250V H,K,R * * ** 11.37 289 8.25 210 12.25 311 7.75 197 .75 19
NF100 100A 200A 600V H,K,R * * ** 11.37 289 8.25 210 14.75 375 7.75 197 .75 19
NF100 100A 200A 600V J * * ** 11.37 289 8.25 210 11.00 279 7.75 197 .75 19
N200 200A (non) (non) -- * * ** 10.06 256 6.62 210 7.25 184 10.50 267 .75 19
NF200 200A 200A 250V H,K,R * * ** 10.06 256 6.62 168 15.00 381 10.50 267 .75 19
NF200 200A 200A 600V H,K,R * * ** 10.06 256 6.62 168 17.50 445 10.50 267 .75 19
NF200 200A 200A 600V J * * ** 10.06 256 6.62 168 13.75 349 10.50 267 .75 19
NF200 200A 400A 250V H,K,R * * ** 10.06 256 6.62 168 16.50 419 11.00 279 .75 19
NF200 200A 400A 600V H,K,R * * ** 10.06 256 6.62 168 19.50 495 11.00 279 .75 19
NF200 200A 400A 600V J * * ** 10.06 256 6.62 168 15.00 381 11.00 279 .75 19
1494D Disconnect Mechanism
Allen-Bradley† Circuit Breaker Type Enclosure Height
Mechanism for Amp 60 72 C D(1) E
Circuit Breakers Manufacturer Frame(s) A BA B
in. mm in. mm in. mm in. mm in. mm in. mm in mm
N4/N40 150A General Electric TED,THED,TEC 5.87 149 5.25 133 11.37 289 10.75 273 5.87 149 4.62 117 .75 19
N5/N55 225A General Electric TFK,THFK,TFC 5.87 149 4.50 114 11.37 289 10.00 254 8.87 225 4.75 121 .75 19
N4/N40 150A Westinghouse F (series C) 5.87 149 5.25 133 11.37 289 10.75 273 5.87 149 4.62 117 .75 19
N5/N50 250A Westinghouse J (series C) 5.87 149 4.50 114 11.37 289 10.00 254 8.87 225 4.75 121 .75 19
N5/N60 400A Westinghouse K (series C) ** ** 11.37 289 10.00 254 8.87 225 5.87 149 .75 19
Disconnect Encl.
† Marks are the property of their respective owners.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
313 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Floor-Standing Enclosures
Disconnect Ordering Information
Cutler-Hammer †
C361 Disconnect Mechanism
* Do not install disconnects in this height enclosure.
(1) Wire bending space “B” does not allow the maximum size cable in 60H enclosures.
(2) Wire bending space “B” does not allow the maximum size cable in 72H enclosures.
The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed. Fit and
function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the applicable
regulations, codes and standards.
Cutler-Hammer† Fuse Clip Rating Fuse Enclosure Height
Mechanism Amp Class 60 72 C DE
Switches Amp Volt A BAB
in. mm in. mm in. mm in. mm in. mm in. mm in mm
NC 30A (non) (non) -- 7.87 200 6.50 165 13.37 340 12.00 305 4.75 121 6.25 1588 .25 6
SC21 30A 30A 250V H,K,R 7.87 200 6.50 165 13.37 340 12.00 305 7.75 197 6.25 1588 .25 6
SC61 30A 30A 600V H,K,R 7.87 200 6.50 165 13.37 340 12.00 305 7.75 197 6.25 1588 .25 6
SC61 30A 30A 600V J 7.87 200 6.50 165 13.37 340 12.00 305 7.75 197 6.25 1588 .25 6
SC61 30A 60A 250V H,K,R 7.87 200 6.50 165 13.37 340 12.00 305 8.25 210 6.25 1588 .25 6
ND 60A (non) (non) -- 7.87 200 6.50 165 13.37 340 12.00 305 4.75 121 6.25 1588 .25 6
SD22 60A 30A 600V J 7.87 200 6.50 165 13.37 340 12.00 305 7.75 197 6.25 1588 .25 6
SD22 60A 60A 250V H,K,R 7.87 200 6.50 165 13.37 340 12.00 305 8.25 210 6.25 1588 .25 6
SD62 60A 60A 600V H,K,R 7.87 200 6.50 165 13.37 340 12.00 305 8.25 210 6.25 1588 .25 6
SD62 60A 60A 600V J 7.87 200 6.50 165 13.37 340 12.00 305 8.00 203 6.25 1588 .25 6
NE 100A (non) (non) -- 7.87 200 6.12 155 13.37 340 11.62 295 4.25 108 7.50 191 .25 6
SE263 100A 100A 250V H,K,R 7.87 200 6.12 155 13.37 340 11.62 295 9.00 229 7.50 191 .25 6
SE263 100A 100A 600V H,K,R 7.87 200 6.12 155 13.37 340 11.62 295 9.00 229 7.50 191 .25 6
SE263 100A 100A 600V J 7.87 200 6.12 155 13.37 340 11.62 295 7.75 197 7.50 191 .25 6
NF (1) 200A (non) (non) -- 7.87 200 4.12 155 13.37 340 9.62 295 13.25 337 10.25 260 .25 6
SF264 (1) 200A 200A 250V H,K,R 7.87 200 4.12 155 13.37 340 9.62 295 13.25 337 10.25 260 .25 6
SF264 (1) 200A 200A 600V H,K,R 7.87 200 4.12 155 13.37 340 9.62 295 13.25 337 10.25 260 .25 6
SF264 (1) 200A 200A 600V J 7.87 200 4.12 155 13.37 340 9.62 295 13.25 337 10.25 260 .25 6
C371 Disconnect Mechanism
Cutler-Hammer† Circuit Breaker Type Enclosure Height
Mechanism for Amp 60 72 C DE
Circuit Breakers Manufacturer Frame(s) A BA B
in. mm in. mm in. mm in. mm in. mm in. mm in mm
C371E 150A Cutler-Hammer HMCP,FS,FH 7.87 200 7.62 194 13.37 340 13.12 333 6.00 152 5.75 146 .25 6
C371F (1) 225A Cutler-Hammer HMCP,JS,JH,JL 7.87 200 7.50 191 13.37 340 13.00 330 11.00 279 8.25 210 .25 6
C371F (1) 400A Cutler-Hammer HMCP,KS,KH 7.87 200 7.00 178 13.37 340 12.50 318 9.75 248 8.25 210 .25 6
C371G (1) 600A Cutler-Hammer LS,LH * * ** 13.37 340 10.87 276 8.50 216 12.00 305 .25 6
C371E 150A Westinghouse F (series C) 7.87 200 7.62 194 13.37 340 13.12 333 6.00 152 5.75 146 .25 6
C371F (1) 250A Westinghouse J (series C) 7.87 200 7.50 191 13.37 340 13.00 330 9.00 229 8.25 210 .25 6
C371F (1) 400A Westinghouse K ( series C) 7.87 200 7.00 178 13.37 340 12.50 318 9.75 248 8.25 210 .25 6
C371G (1) 600A Westinghouse LA,LC * * ** 13.37 340 10.87 276 8.50 216 12.00 305 .25 6
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
314 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Floor-Standing Enclosures
Disconnect Ordering Information
General Electric® †
General Electric† Fuse Clip Rating Fuse Enclosure Height
Mechanism Amp Class 60 72 C DE
for Switches Amp Volt A BA B
in. mm in. mm in. mm in. mm in. mm in. mm in mm
TDOM1A 30A (non) (non) -- 7.87 200 8.37 213 13.37 340 13.87 340 7.00 178 5.50 140 .25 6
TDOM1A 30A 30A 250V H,R 7.87 200 8.37 213 13.37 340 13.87 340 7.00 178 5.50 140 .25 6
TDOM1B 30A 30A 600V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM1B 30A 60A 250V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM1B 30A 60A 600V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM1A 60A (non) (non) -- 7.87 200 8.37 213 13.37 340 13.87 340 7.00 178 5.50 140 .25 6
TDOM1B 60A 60A 250V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM1B 60A 60A 600V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM1B 60A 100A 250V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM1B 60A 100A 600V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM1A 100A (non) (non) -- 7.87 200 8.37 213 13.37 340 13.87 340 7.00 178 5.50 140 .25 6
TDOM1B 100A 100A 250V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM1B 100A 100A 600V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM1B 100A 200A 250V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM1B 100A 200A 600V H,R 7.87 200 8.37 213 13.37 340 13.87 340 11.50 292 5.50 140 .25 6
TDOM2 200A (non) (non) -- 7.87 200 5.75 146 13.37 340 11.25 286 7.00 178 9.25 235 .25 6
TDOM2 200A 200A 250V H,R 7.87 200 5.75 146 13.37 340 11.25 286 15.50 394 9.25 235 .25 6
TDOM2 200A 200A 600V H,R 7.87 200 5.75 146 13.37 340 11.25 286 15.50 394 9.25 235 .25 6
General Electric† Circuit Breaker Type Enclosure Height
Mechanism for Amp 60 72 C DE
Circuit Breakers ABA B
in. mm in. mm in. mm in. mm in. mm in. mm in mm
TDOM1A 150A TEB,TEC,TED,THED 7.87 200 7.25 184 13.37 340 12.75 324 7.00 178 5.50 140 .25 6
TDOM1B 150A TB1,TEC,TECL 7.87 200 7.25 184 13.37 340 12.75 324 11.50 292 5.50 140 .25 6
TDOM1C 150A TEL 7.87 200 7.25 184 13.37 340 12.75 324 7.00 178 5.50 140 .25 6
TDOM1D 150A THCL1 7.87 200 5.87 149 13.37 340 11.37 289 7.00 178 5.50 140 .25 6
TDOM3 225A TFJ,TFK,THFK,TFL 7.87 200 6.87 174 13.37 340 12.37 314 10.50 267 6.00 152 .25. 6
TDOM4 400A TJJ,TJK4,THJK4,TJL4V * * * * 13.37 340 11.50 292 8.25 210 9.50 241 .25 6
TDOM4 600A TJK6,THJK6,TJ4V,TJL4V ** ** 13.37 340 11.50 292 8.25 210 9.50 241 .25 6
TDOM5 400A TB4,TJH6S ** ** 13.37 340 11.50 292 14.25 362 9.50 241 .25 6
TDOM6 225A TLB2,THLC2 ** ** 13.37 340 10.87 276 11.75 298 9.50 241 .25 6
TDOM6 400A TLB4,THLC4 ** ** 13.37 340 9.50 241 11.75 298 9.50 241 .25 6
TDA Disconnect Mechanism
* Do not install disconnects in this height enclosure.
The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed.
Fit and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the
applicable regulations, codes and standards.
Disconnect Encl.
† Marks are the property of their respective owners.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
315 B-Line series electrical enclosures Eaton
Disconnect Enclosures
I-T-E† Circuit Enclosure Height
Enclosure Cable Mechanism Breaker Amp Device A C(1) D(2)
Circuit Breakers Frame Height 60 72 nom min max min max
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
36 FHOE036 ED 125A 6.37 162 7.87 200 13.37 340 5.37 136 -5.37 -136 15.43 392 3.00 76 14.00 356
36 FHOE036 CED 125A 9.62 244 7.87 200 13.37 340 8.50 216 -2.00 -51 18.75 476 3.00 76 14.00 356
36 FHOF036 FD 250A 9.50 241 7.87 200 13.37 340 5.62 143 -5.00 -127 15.75 400 4.50 114 12.50 318
12 36 FHOF036 CFD 250A 14.12 349 7.87 200 13.37 340 10.25 260 -.25 -6 20.50 521 4.50 114 12.50 318
36 FHOJ036 JD,LD 400A, 600A 11.00 279 7.87 200 13.37 340 5.25 133 -5.43 -138 15.37 390 7.50 191 14.00 356
36 FHOJ036 CJD 400A, 600A 17.87 454 7.87 200 13.37 340 12.12 308 1.50 38 22.25 565 7.50 191 14.00 356
36 FHOE036 ED 125A 6.37 162 7.87 200 13.37 340 5.37 136 -2.75 -70 13.50 343 3.00 76 9.75 248
36 FHOE036 CED 125A 9.62 244 7.87 200 13.37 340 8.50 216 .62 16 16.87 428 3.00 76 9.75 248
36 FHOF036 FD 250A 9.50 241 7.87 200 13.37 340 5.62 143 2.43 62 13.87 352 4.50 114 8.50 216
18 36 FHOF036 CFD 250A 14.12 359 7.87 200 13.37 340 10.25 260 7.25 39 18.62 473 4.50 114 8.50 216
36 FHOJ036 JD,LD 400A, 600A 11.00 279 7.87 200 13.37 340 5.25 133 -2.87 -73 13.43 341 7.50 191 10.12 257
36 FHOJ036 CJD 400A, 600A 17.87 454 7.87 200 13.37 340 12.12 308 4.12 105 20.37 517 7.50 191 10.12 257
48 * ED 125A 6.37 162 7.87 200 13.37 340 5.37 136 -16.37 -416 27.50 699 3.00 76 26.37 670
48 * CED 125A 9.62 244 7.87 200 13.37 340 8.50 216 -13.00 -330 30.87 784 3.00 76 26.37 670
48 * FD 250A 9.50 241 7.87 200 13.37 340 5.62 143 -16.00 -406 27.87 708 4.50 114 24.87 632
12 48 * CFD 250A 14.12 359 7.87 200 13.37 340 10.25 260 -11.25 -286 32.62 829 4.50 114 24.87 632
48 * JD,LD 400A, 600A 11.00 279 7.87 200 13.37 340 5.25 133 -16.43 -417 27.43 697 7.50 191 26.37 670
48 * CJD 400A, 600A 17.87 454 7.87 200 13.37 340 12.12 308 -9.50 -241 34.37 873 7.50 191 26.37 670
48 FHON048 MD,ND 800A, 1200A 16.00 406 7.87 200 13.37 340 8.12 206 -6.62 -168 21.93 557 9.00 229 20.50 521
48 * ED 125A 6.37 162 7.87 200 13.37 340 5.37 136 -15.37 -390 26.25 667 3.00 76 24.43 621
48 * CED 125A 9.62 244 7.87 200 13.37 340 8.50 216 -12.00 -305 29.50 749 3.00 76 24.43 621
48 * FD 250A 9.50 241 7.87 200 13.37 340 5.62 143 -15.00 -381 26.50 673 4.50 114 23.00 584
18
48 * CFD 250A 14.12 359 7.87 200 13.37 340 10.25 260 -10.25 -260 30.37 771 4.50 114 23.00 584
48 * JD,LD 400A, 600A 11.00 279 7.87 200 13.37 340 5.25 133 -15.43 -392 26.12 663 7.50 191 24.50 622
48 * CJD 400A, 600A 17.87 454 7.87 200 13.37 340 12.12 308 -8.50 -216 33.00 838 7.50 191 24.50 622
48 FHON048 MD,ND 800A 1200A 16.00 406 7.87 200 13.37 340 8.12 206 -5.12 -130 21.43 544 9.00 229 20.50 521
48 * ED 125A 6.37 162 7.87 200 13.37 340 5.37 136 -13.37 -340 23.25 591 3.00 76 20.62 524
48 * CED 125A 9.62 244 7.87 200 13.37 340 8.50 216 -10.00 -254 26.50 673 3.00 76 20.62 524
48 * FD 250A 9.50 241 7.87 200 13.37 340 5.62 143 -13.00 -330 23.50 597 4.50 114 19.37 492
24 48 * CFD 250A 14.12 359 7.87 200 13.37 340 10.25 260 -8.25 -210 28.37 721 4.50 114 19.37 492
48 * JD,LD 400A, 600A 11.00 279 7.87 200 13.37 340 5.25 133 -13.43 -341 23.12 587 7.50 191 20.93 532
48 * CJD 400A, 600A 17.87 454 7.87 200 13.37 340 12.12 308 -6.50 -165 30.00 762 7.50 191 20.93 532
48 FHON048 MD,ND 800A, 1200A 16.00 406 7.87 200 13.37 340 8.12 206 -3.12 -79 19.93 506 9.00 229 20.50 521
Floor-Standing Enclosures
Disconnect Ordering Information
I-T-E Siemens® †
Disconnect Cable Circuit Breaker Types Mechanism Length
FHOE036 36 ED2, ED4, ED6, HED4, HED6, ED6ETI
FHOE036 36 CED6, CED6ETI
FHOF036 36 FD6, FXD6, HFD6, FXD6ETI
FHOF036 36 CFD6, CFD6ETI
FHOJ036 36 JD2, JD6, JXD6, HJD6, JXD6ETI, LD6,LXD6, HLD6, LXD6ETI, SHJD6, SLD6,SHLD6
FHOJ036 36 CJD6, CJD6ETI, CLD6, CLD6ETI,SCJD6,SCLD6
FHON048 48 MD6, HMD6, CMD6, MXD6ETI, CMD6ETI, SMD6, SHMD6, SCMD6, ND6, HND6, CND6, SND6, SCND6
MAX-FLEX † Disconnects
I-T-E SIEMENS®† MAX-FLEX† Disconnect Mechanism
* Non-standard mechanism with 48 inch operating cable must be specified.
(1) Flexible operating cable allows disconnect to be mounted within min and max of “C” dimension when “D” is minimum.
(2) Flexible operating cable allows disconnect to be mounted within min and max of “D” dimension when “C” is nominal.
The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to
be installed. Fit and function of all equipment should be checked before and after installation to assure proper and safe operation
and compliance with the applicable regulations, codes and standards.
Notes: Refer to detail sheet for drawing information and associated dimensions.
Flexible cable allows for variable disconnect mounting and adequate wire bending space must be maintained.
Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
316 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Floor-Standing Enclosures
Disconnect Ordering Information
Square D® †
9422 Disconnect Mechanism
* Do not install disconnects in this height enclosure.
The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed.
Fit and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the
applicable regulations, codes and standards.
Square D† Fuse Clip Rating Fuse Enclosure Height
Mechanism Amp Class 60 72 C DE
for Switches Amp Volt A BA B
in. mm in. mm in. mm in. mm in. mm in. mm in mm
RC-1 30A (non) (non) -- 7.87 200 7.75 197 13.37 340 13.18 335 3.25 83 7.25 184 .25 6
RC-2 30A 30A 250V H,K,R 7.87 200 7.75 197 13.37 340 13.18 335 5.00 127 7.25 184 .25 6
RC-3 30A 30A 600V H,K,R 7.87 200 7.75 197 13.37 340 13.18 335 8.00 203 7.25 184 .25 6
RC-3 30A 30A 600V J 7.87 200 7.75 197 13.37 340 13.18 335 5.00 127 7.25 184 .25 6
RC-3 30A 60A 250V H,K,R 7.87 200 7.75 197 13.37 340 13.18 335 6.00 152 7.25 184 .25 6
TC-1 30A (non) (non) -- 7.87 200 5.87 149 13.37 340 11.37 289 5.75 146 6.25 159 .25 6
TC-2 30A 30A 250V H,K,R 7.87 200 5.87 149 13.37 340 11.37 289 5.75 146 6.25 159 .25 6
TC-3 30A 30A 600V H,K,R 7.87 200 5.87 149 13.37 340 11.37 289 7.75 197 6.25 159 .25 6
TC-3 30A 30A 600V J 7.87 200 5.87 149 13.37 340 11.37 289 5.75 146 6.25 159 .25 6
TC-3 30A 60A 250V H,K,R 7.87 200 5.87 149 13.37 340 11.37 289 6.00 152 6.25 159 .25 6
TD-1 60A (non) (non) -- 7.87 200 6.75 171 13.37 340 12.25 311 6.50 165 6.75 171 .25 6
TD-2 60A 30A 600V H,K,R 7.87 200 6.75 171 13.37 340 12.25 311 8.50 216 6.75 171 .25 6
TD-2 60A 60A 250V H,K,R 7.87 200 6.75 171 13.37 340 12.25 311 6.50 165 6.75 171 .25 6
TD-3 60A 60A 600V H,K,R 7.87 200 6.75 171 13.37 340 12.25 311 9.00 229 6.75 171 .25 6
TD-3 60A 60A 600V J 7.87 200 6.75 171 13.37 340 12.25 311 6.50 165 6.75 171 .25 6
TE-1 100A (non) (non) -- 7.87 200 6.50 165 13.37 340 12.00 305 4.75 121 8.50 216 .25 6
TE-2 100A 100A 250V H,K,R 7.87 200 6.50 165 13.37 340 12.00 305 7.50 191 8.50 216 .25 6
TE-2 100A 100A 600V H,K,R 7.87 200 6.50 165 13.37 340 12.00 305 9.50 241 8.50 216 .25 6
TE-2 100A 100A 600V J 7.87 200 6.50 165 13.37 340 12.00 305 6.25 159 8.50 216 .25 6
TE-3 100A 200A 600V J 7.87 200 6.50 165 13.37 340 12.00 305 13.75 349 8.50 216 .25 6
TF-1 200A (non) (non) -- 7.87 200 5.12 130 13.37 340 10.62 270 5.50 140 11.75 298 .25 6
TF-2 200A 200A 250V H,K,R 7.87 200 5.12 130 13.37 340 10.62 270 11.50 292 11.75 298 .25 6
TF-2 200A 200A 600V H,K,R 7.87 200 5.12 130 13.37 340 10.62 270 14.00 356 11.75 298 .25 6
TF-2 200A 200A 600V J 7.87 200 5.12 130 13.37 340 10.62 270 10.25 260 11.75 298 .25 6
TF-3 200A 400A 600V J 7.87 200 5.15 131 13.37 340 10.62 270 14.50 368 11.75 298 .25 6
Square D† Enclosure Height
Mechanism for Amp Circuit Breaker Type 60 72 CDE
Circuit Breakers A BA B
in. mm in. mm in. mm in. mm in. mm in. mm in mm
RN-1 100A FAL,FHL,FCL 7.87 200 6.87 174 13.37 340 12.37 314 5.25 133 5.50 140 .25 6
RP-1 250A KAL,KHL,KCL 7.87 200 6.62 168 13.37 340 13.12 333 7.25 184 5.75 146 .25 6
RR-1 400A LAL,LHL,Q4L * * ** 13.37 340 8.75 222 7.75 197 9.00 229 .25 6
RR-2 400A ILL * * ** 13.37 340 13.12 333 11.00 279 15.75 400 .25 6
Disconnect Encl.
† Marks are the property of their respective owners.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
317 B-Line series electrical enclosures Eaton
Disconnect Enclosures
ALLEN-BRADLEY †
Standard enclosure designed to accept variable depth
type 1494V / 1494U.
Allen-Bradley† 1494V / 1494U disconnect switch:
1. Disconnect switch.
2. Operating mechanism.
3. Operating handle.
4. Fuse block kit, (if required).
5. Fuse clip kit, (if required).
6. Line and load connectors, (if necessary).
7. Connecting rod.
Allen-Bradley† 1494V / 1494U circuit breaker:
1. Circuit breaker, (General Electric, Westinghouse).
2. Operating mechanism.
3. Operating handle.
4. Line and load connectors, (if necessary).
5. Connecting rod.
NOTE: Allen-Bradley support kit is recommended when
1494V devices are installed in 72 inch high center
mounted enclosures.
Standard enclosures designed to accept fixed depth
type 1494F or 1494D.
Allen-Bradley† 1494F disconnect switch:
1. Disconnect switch.
2. Operating mechanism.
3. Operating handle.
4. Fuse block kit, (if required).
5. Fuse clip kit, (if required).
6. Line and load connectors, (if necessary).
Allen-Bradley† 1494D circuit breaker:
1. Circuit breaker.
2. Operating mechanism.
3. Operating handle.
4. Line and load connectors, (if necessary).
5. Slide mechanism.
CUTLER-HAMMER †
Standard enclosures designed to accept variable depth
type C361 or C371.
Cutler-Hammer† C361 disconnect switch:
1. Disconnect switch.
2. Operating mechanism.
3 Operating handle.
4. Fuse clip kit, (if required).
5. Line and load connectors, (if necessary).
NOTE: Items 1, 2 and 3 can be ordered as an assembly.
Cutler-Hammer† C371 circuit breaker:
1. Circuit breaker.
2. Operating mechanism.
3. Operating handle.
4. Line and load connectors, (if necessary).
NOTE: Items 2 and 3 can be ordered as an assembly.
GENERAL ELECTRIC †
Standard enclosures designed to accept variable depth
type TDA.
General Electric† TDA disconnect switch:
1. Disconnect Switch, (QMR, QMW).
2. Operating mechanism.
3. Operating handle.
4. Fuse clip kit or no-fuse kit, (if required).
5. Line and load connectors, (if necessary).
6. Extended length drive rod, (if required).
NOTE: These items can be ordered as an assembly.
General Electric† TDA circuit breaker:
1. Circuit breaker.
2. Operating mechanism.
3. Operating handle.
4. Line and load connectors, (if necessary).
5. Extended length drive rod, (if required).
NOTE: When TDOM1 and TDOM3 operating mechanism is
used on 72 inch high center mounted enclosures a
flange stiffener kit TDSR is recommended.
I-T-E SIEMENS †
Standard enclosures designed to accept MAX-FLEX†
type FHO.
I-T-E† MAX-FLEX† circuit breaker:
1. Circuit breaker.
2. Operating mechanism.
3. Operating handle.
4. Line and load connectors, (if necessary).
5. Operating cable.
NOTE: Items 2, 3 and 5 can be ordered as an assembly,
standard with a 36 inch long operating cable. All 24
inch enclosures require a 48 inch long cable.
Floor-Standing Enclosures
Disconnect Ordering Information
Notes: Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
318 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Floor-Standing Enclosures
Disconnect Ordering Information
SQUARE D †
Standard enclosures designed to accept variable depth
type 9422.
Square D† 9422 disconnect switch:
1. Disconnect switch.
2. Operating mechanism.
3. Operating handle.
4. Fuse Clip kit, (if required).
5. Line and load connectors, (if necessary).
6. Connecting rod.
NOTE: Square D support kit 9422-C1 is recommended when
some devices are installed in 72 inch high center
mounted enclosures.
Square D† 9422 circuit breaker:
1. Circuit breaker.
2. Operating mechanism.
3. Operating handle.
4. Line and load connectors, (if necessary).
5. Connecting rod.
NOTE: Square D support kit 9422-C1 is recommended when
some devices are installed in 72 inch high enclosures.
When ordering flange or center mounted disconnect
equipment, be sure to include all necessary
components listed below.
1. Enclosure includes the following equipment:
Enclosure door locking handle and rods
Door interlocking system
Interlocking connecting rod
Adjustable bracket, (see note 3)
2. Operator adapter plate, gasket and hardware for the type
of disconnect device being used MUST be ordered
separately (see page 451)
3. 24 inch deep enclosures include an adjustable bracket for
mounting some disconnects:
Cutler-Hammer† C361 device
Cutler-Hammer† C371 E and F devices unless long
connecting rod C371CS1 is specified
Cutler-Hammer† C371 G device unless long connecting
rod C371CS2 is specified
General Electric† TDA device extended length rod TDSR
is specified
Square D† 9422 device unless extra long connecting rod
9422-R2 is specified
Note: Some devices require two rods, consult the device
manufacturer (Westinghouse AMT below handle device).
4. Panels are ordered separately.
5. Disconnects and related components are available from
the manufacturer.
6. The disconnect ordering information provided is derived
from information supplied by the manufacturer of the
equipment to be installed. Fit and function of all
equipment should be checked before and after
installation to assure proper and safe operation and
compliance with the applicable regulations, codes and
standards.
Important Note
Notes: Data subject to change without notice.
Disconnect Encl.
† Marks are the property of their respective owners.
319 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Ground-Mount Enclosures
Type 12 Heavy-Duty Single & Multi-Door
Flange-Mount Free-Standing with 3-Point Locking
Data Sheet
Construction
• Enclosure body (10 or 12) gauge (see appropriate charts) and
door (12) gauge are fabricated from steel
• All continuous welded seams are finished smooth
• Doors are secured to the body with removable concealed
hinges and a center locating 3-point key-locking and padlock
handle mechanism
• Modern bevel profile on hinge side of enclosure door(s)
• Right-side door serves as the master door with a defeater
mechanism which requires a screwdriver to open
• Slave doors cannot open without activating mechanical
interlock but can close in any order
• Universal opening on right-side flange will accommodate
most disconnect operators when used with operator
adapter, (order separately - see page 451)
• Doors have an oil-resistant gasket
• Ground stud provided on door(s) and body
• Print pocket provided
• Lighting mounting channel provided
• Fixed center posts are supported from the front to back for
enclosure rigidity
• Removable center post allows for easy access and panel
installation
• Removable panels mounted on .375-16 collar studs and
panel supports
• Large lifting eyebolts are supplied
Application
• Houses electrical controls and equipment
• Protects against circulating dust, falling dirt and
dripping non-corrosive liquids
Standards
• UL 508A listed, Type 12
• CSA C22.2 No.94 certified, Type 12
• Conforms to NEMA standard for Type 12
Finish
• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
• Panels have white enamel finish
Accessories
• Channel mounting hardware
• Blank adapter plates
• Operator adapters
• Touch-up paint
• Replacement handles: defeater handle BD-PDHB and
keyed kandle BD-PKHB (see pages 428 & 429).
• See Accessories Section
Discount Schedule: C2
Subclass: see pages 321 - 325 Important Note
When ordering flange-mounted disconnect enclosures,
be sure to include all the necessary components.
1. A flange-mounted disconnect enclosure
2. Operator adapter plates MUST be ordered for the
specific brand and type of disconnect being used,
(see page 451)
Disconnect switch (or circuit breaker), operating handle and
operating mechanism are not furnished with enclosure, see
disconnect ordering information, pages 326, 332 - 339.
Disconnect Encl.
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
320 Eaton B-Line series electrical enclosures
Disconnect Enclosures
FD723318-12FS
FD8411718-12FS FD725318-12FS
Ground-Mount Enclosures
Type 12 Heavy-Duty
Single-Door
Flange-Mount
Free-Standing with
3-Point Locking
Illustration Sheet and
Catalog Number
Subclass: DOE
3-point padlock
handle
flange disconnect
opening
print pocket
(supplied)
panel
1.30 **
(33)
5.35
(136)
lighting channel
ground stud
ground stud
lifting eye
B-4.70
(120)
C-1.30
(33)
C+0.15 *
(4)
A-8.63
(219)
Disconnect Encl.
Front View Side View
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Four lifting eyes are furnished when C dimension is 24” (609 mm) or more.
321 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Section X-X
X X
B ID C ID
A ID
ID = Inside Dimension
Enclosure Enclosure Size Panel Size
Height x Width x Depth Gauge
A x B x C Height x Width
Catalog Number in. mm in. mm
FD722718-12FS 72.00 x 27.50 x 18.00 1829 x 699 x 457 12 60.00 x 21.75 1524 x 552
FD723318-12FS 72.00 x 33.50 x 18.00 1829 x 851 x 457 12 60.00 x 27.75 1524 x 705
FD723918-12FS 72.00 x 39.50 x 18.00 1829 x 1003 x 457 12 60.00 x 33.75 1524 x 857
FD843918-12FS 84.00 x 39.50 x 18.00 2134 x 1003 x 457 12 72.00 x 33.75 1829 x 857
FD903920-12FS 90.00 x 39.50 x 20.00 2286 x 1003 x 508 12 78.00 x 33.75 1981 x 857
FD903924-12FS 90.00 x 39.50 x 24.00 2286 x 1003 x 610 12 78.00 x 33.75 1981 x 857
* From inside of door to front of panel
** From front of panel to back inside of enclosure
Ground-Mount Enclosures
Type 12 Heavy-Duty Double-Door
Flange-Mount Free-Standing with 3-Point Locking
Illustration Sheet and Catalog Number
Subclass: DOE
3-point
defeater
padlock
handle
print pocket
(supplied)
removable center post
rotation rotation
5.35
(136)
B/2-4.50
(114)
A-8.62
(219)
lighting channel
lifting eye
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Four lifting eyes are furnished when C dimension is 24” (609 mm) or more.
Disconnect Encl.
Front View
Top View
Side View
322 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Enclosure Enclosure Size Panel Size
Height x Width x Depth Gauge
A x B x C Height x Width
Catalog Number in. mm in. mm
FD725318-12FS 72.00 x 53.75 x 18.00 1829 x 1365 x 457 12 60.00 x 48.00 1524 x 1219
FD726518-12FS 72.00 x 65.75 x 18.00 1829 x 1670 x 457 12 60.00 x 60.00 1524 x 1524
FD727718-12FS 72.00 x 77.75 x 18.00 1829 x 1975 x 457 12 60.00 x 72.00 1524 x 1829
FD727724-12FS 72.00 x 77.75 x 24.00 1829 x 1975 x 610 12 60.00 x 72.00 1524 x 1829
FD847718-12FS 84.00 x 77.75 x 18.00 2134 x 1975 x 457 12 72.00 x 72.00 1829 x 1829
FD907720-12FS 90.00 x 77.75 x 20.00 2286 x 1975 x 508 12 78.00 x 72.00 1981 x 1829
FD907724-12FS 90.00 x 77.75 x 24.00 2286 x 1975 x 610 12 78.00 x 72.00 1981 x 1829
B ID C ID
A ID
flange disconnect
opening
Section X-X
X X
grounding &
bonding provisions
for body & door
B-4.75
(120)
C-1.30
(33) panel
ID = Inside Dimension
1.30 **
(33)
* From inside of door to front of panel
** From front of panel to back inside of enclosure
C+0.15 *
(4)
Ground-Mount Enclosures
Type 12 Heavy-Duty Three-Door
Flange-Mount Free-Standing with 3-Point Locking
Illustration Sheet and Catalog Number
Subclass: DOF
Enclosure Enclosure Size Panel A Size Panel B Size
Height x Width x Depth D E Gauge
A x B x C Height x Width Height x Width
Catalog Number in. mm in. mm in. mm in. mm in. mm
FD729918-12FS 72.00 x 99.50 x 18.00 1829 x 2527 x 457 67.60 1717 31.90 810 10 60.00 x 27.75 1524 x 705 60.00 x 60.00 1524 x 1524
FD8411718-12FS 84.00 x 117.50 x 18.00 2134 x 2985 x 457 79.60 2022 37.90 962 10 72.00 x 33.75 1829 x 857 72.00 x 72.00 1829 x 1829
FD9011724-12FS 90.00 x 117.50 x 24.00 2286 x 2985 x 610 79.60 2022 37.90 962 10 78.00 x 33.75 1981 x 857 78.00 x 72.00 1981 x 1829
Disconnect Encl.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Four lifting eyes are furnished when C dimension is 24” (610 mm) or more.
323 B-Line series electrical enclosures Eaton
Disconnect Enclosures
print pocket
(supplied)
print pocket
(supplied)
removable
center post
fixed
center post
fixed center
post support
rotation rotation
rotation
panel B
panel A
5.39
(137)
E-3.50
(89)
D/2-0.60
(15)
D/2-0.60
(15)
A-8.84
(224)
3-point padlock
handle
D E
lighting channel
lifting eye
1.30
(33)
Front View Side View
B ID
C ID
A ID
ID = Inside Dimension
C-1.30
(33)
C+0.15
(4)
Section X-X
X X
B-4.75
(120)
flange disconnect
opening
grounding &
bonding provisions
for body & door
Ground-Mount Enclosures
Type 12 Heavy-Duty Four-Door
Flange-Mount Free-Standing with 3-Point Locking
Illustration Sheet and Catalog Number
Subclass: DOF
print pocket
(supplied)
print pocket
(supplied)
removable
fixed center post center post
fixed center
post support
rotation rotation rotation rotation
panel panel
1.30
(33)
18.00
(457)
7.37
(187)
84.00
(2134)
77.77
(1975)
79.72
(2025)
73.05
(185)
75.38
(191)
73.05
(185)
157.50
(4001)
3-point padlock
handle
lifting eye
Enclosure Enclosure Size Panel Size
Height x Width x Depth Gauge Height x Width
Catalog Number in. mm in. mm
FD8415718-12FS 84.00 x 157.50 x 18.00 2134 x 4001 x 457 10 72.00 x 72.00 1829 x 1829
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
Front View
Top View
Side View
324 Eaton B-Line series electrical enclosures
Disconnect Enclosures
ID = Inside Dimension
lighting channel
Section X-X
X X
flange disconnect
opening
grounding &
bonding provisions
for body & door
C-1.30
(33)
C+0.15
(4)
Ground-Mount Enclosures
Type 12 Heavy-Duty Five-Door
Flange-Mount Free-Standing with 3-Point Locking
Illustration Sheet and Catalog Number
Subclass: DOF
Enclosure Enclosure Size Panel A Size Panel B Size
Height x Width x Depth Gauge Height x Width Height x Width
Catalog Number in. mm in. mm in. mm
FD8419618-12FS 84.00 x 196.75 x 18.00 2134 x 4997 x 457 10 72.00 x 33.75 1829 x 857 72.00 x 72.00 1829 x 1829
print pocket
(supplied)
print pocket
(supplied)
print pocket
(supplied)
removable
center post
removable
center post fixed center post fixed center post
fixed center post
support
fixed center post
support
rotation rotation rotation rotation rotation
panel B panel B panel A
1.30
(33)
18.00
(457)
7.37
(187)
84.00
(2134)
77.44
(1967)
78.90
(2004)
40.40
(1026)
34.40
(874)
73.00
(1854)
73.00
(1854)
75.38
(191)
196.75
(4997)
3-point padlock
handle
lighting channel
lifting eye
Disconnect Encl.
Front View Side View
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
325 B-Line series electrical enclosures Eaton
Disconnect Enclosures
ID = Inside Dimension
grounding &
bonding provisions
for body & door
flange disconnect
opening
Section X-X
X X
C-1.30
(33)
C+0.15
(4)
B-4.75
(120)
Ground-Mount Enclosures
Type 12 Heavy-Duty Single & Multi-Door
Flange-Mount Free-Standing with 3-Point Locking
Illustration Sheet
The dimensional information provided in these drawings is derived
from information supplied by the manufacturer of the equipment
to be installed. Fit and function of all equipment should be
checked before and after installation to assure proper and safe
operation and compliance with the applicable regulations, codes
and standards.
Universal opening must be filled with an operator adapter kit
for the specific brand and type of disconnect being used, (see
page 451).
B
D
C
A A B
see universal
opening detail
see universal
opening detail
panel
panel
panel
panel
this area
represents
disconnect
switch or
circuit
breaker
this area
represents
disconnect
switch or
circuit
breaker
C
3.50
(89)
.28 D (Typ)
(7)
3.25
(83)
D
3.00
(76)
1.62
(41)
9.93
(252)
9.31
(236)
1.12
(28)
2.75
(70)
4.00
(102)
3.37
(86)
Flange Mounting
(1 and 2 door enclosures)
Universal Opening Detail
Flange Mounting
(3, 4 and 5 door enclosures)
4.00
(102)
3.37
(86)
Important Note
When ordering flange-mounted disconnect enclosures,
be sure to include all the necessary components.
1. A flange-mounted disconnect enclosure
2. Operator adapter plates MUST be ordered for the
specific brand and type of disconnect being used,
(see page 451)
Disconnect switch (or circuit breaker), operating handle and
operating mechanism are not furnished with enclosure, see
disconnect ordering information, pages 326, 332 - 339.
Notes: Refer to disconnect table for associated dimensions.
Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
326 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Ground-Mount Enclosures
Type 12 Modular Free-Standing
Data Sheet
Construction
• Enclosure and door are fabricated from (12) gauge steel
• All continuous welded seams are finished smooth
• Doors are secured to the body with removable concealed
hinges and a center locating 3-point key-locking and padlock
handle mechanism
• Modern bevel profile on hinge side of enclosure door(s)
• Slave doors cannot open without activation of mechanical
interlock but can close in any order
• Doors have an oil-resistant gasket
• Ground stud provided on door(s) and body
• Print pocket provided
• Modular design and flanged side opening provide strength
and a variety of mounting arrangements
• Heavy steel stiffeners welded across the back provide
enclosure rigidity
• Removable panels mounted on .375-16 collar studs and panel
supports are furnished behind each door
• Large lifting eyebolts are supplied
• Two styles of enclosure construction and specific features:
1. Single-door disconnect enclosure - Left side open. Door
hinges left serving as a master door with connecting
interlocks which prevent slave doors from opening first.
Defeater mechanism on door requires a screwdriver to open.
Universal cut-out on right side flange for disconnect operator.
2. Two-door disconnect enclosure - Left side open. Both doors
hinge left, the right side serving as the master with
connecting interlocks which prevent slave doors from
opening first. Defeater mechanism on door requires a
screwdriver to open. Universal cut-out on right flange for
disconnect operator. Center post is removable. Lighting
mounting channel provided.
Discount Schedule: C2
Subclass: DOG
Application
• Houses electrical controls and instruments
• Protects against circulating dust, falling dirt and
dripping non-corrosive liquids
Standards
• UL 508A listed, Type 12
• CSA C22.2 No.94 certified, Type 12
• Conforms to NEMA standard for Type 12
Finish
• Wash and phosphate undercoat
• ANSI 61 gray polyester powder finish
• Panels have a white polyester powder finish
Accessories
• Channel mounting hardware
• Blank adapter plates
• Operator adapters
• Touch-up paint
• Replacement handles: deafeater handle BD-PDHB
and keyed handle BD-PKHB (see pages 428 & 429).
• See Accessories section
Important Note
When ordering modular enclosure systems, be sure to
include all the necessary components.
1. Disconnect master or slave enclosure
2. Gasket kits and/or end plates (see page 330)
3. Operator adapter plates MUST be ordered for the
specific brand and type of disconnect being used,
(see page 451)
Disconnect switch (or circuit breaker), operating handle and
operating mechanism are not furnished with enclosure, see
disconnect ordering information, pages 332 - 339.
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
Disconnect Encl.
327 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Ground-Mount Enclosures
Type 12 Modular Single-Door Free-Standing
Illustration Sheet and Catalog Number
3-point
defeater
padlock
handle
flanged opening
lifting eye
rotation
flange
disconnect
opening
print pocket
(supplied)
5.35
(136)
X
Section X-X
3.37
(86)
3.75
(95)
2.00
(51)
2.00
(51) connecting hole
B (-5.31)
(135)
A-8.62
(219)
2.08
(523)
C-2.08
(53)
C-0.65
(16) panel
X
Notes: Four lifting eyes are furnished when C dimension is 24 (609 mm). Dimensions are in inches. Millimeters shown are for reference only.
Data subject to change without notice.
Disconnect Encl.
Side View Front View
328
Enclosure Enclosure Size Panel Size
Height x Width x Depth
A x B x C Height x Width
Catalog Number in. mm in. mm
MFD723918-12FS 72.00 x 39.75 x 18.00 1829 x 1010 x 457 60.00 x 33.75 1524 x 857
MFD843918-12FS 84.00 x 39.75 x 18.00 2134 x 1010 x 457 72.00 x 33.75 1829 x 857
MFD843924-12FS 84.00 x 39.75 x 24.00 2134 x 1010 x 610 72.00 x 33.75 1829 x 857
Eaton B-Line series electrical enclosures
Disconnect Enclosures
B ID
C ID
A ID
ID = Inside Dimension
grounding &
bonding provisions
for body & door
Ground-Mount Enclosures
Type 12 Modular Double-Door Free-Standing
Illustration Sheet and Catalog Number
Connecting
hole
3-point
padlock
handle
flanged opening lighting channel
disconnect
opening
lifting
eye
rotation rotation
5.35
(136)
print pocket
(supplied)
removable
center post
panel
X X
Section X-X
B-5.31
(135)
3.37
(86)
3.75
(95)
2.00
(51)
2.00
(51)
B/2-4.58
(116)
A-8.62
(219)
2.08
(53)
Notes: Four lifting eyes are furnished when C dimension is 24 (609 mm). Dimensions are in inches. Millimeters shown are for reference only.
Data subject to change without notice.
Disconnect Encl.
Side View Front View
329
Enclosure Enclosure Size Panel Size
Height x Width x Depth
A x B x C Height x Width
Catalog Number in. mm in. mm
MFD727818-12FS 72.00 x 78.00 x 18.00 1829 x 1981 x 457 60.00 x 72.00 1524 x 1829
MFD847818-12FS 84.00 x 78.00 x 18.00 2134 x 1981 x 457 72.00 x 72.00 1829 x 1829
MFD847824-12FS 84.00 x 78.00 x 24.00 2134 x 1981 x 610 72.00 x 72.00 1829 x 1829
B-Line series electrical enclosures Eaton
Disconnect Enclosures
B ID
C ID
A ID
C-2.08
(53)
C-0.65
(16)
Free-Standing Accessories
End Plates & Gasket Kits
Illustration Sheet and Catalog Number
Gasket Kit
Pre-cut and pre-punched
high density poron gasket is
required for sealing barrier
to additional modular
enclosures when ganging.
Includes: Gasket &
Hardware.
End Plate
Formed end plate and
gasket used to seal open
end of Modular enclosure.
Includes: End Plate, Gasket
& Hardware.
Flat End Plate
Flat end plate and gasket
used to seal open end of
Modular enclosure. Also can
serve as a barrier when
additional gasket is used.
Includes: Flat End Plate,
Gasket & Hardware
B
B B+.37
(9)
A A A
2.50
(64)
Modular Accessories
Size Fits Enclosure
A B H x D
Catalog Number in. mm in. mm in. mm in. mm
End Plate
M7218-12FEK 72.00 1829 18.00 457 72.00 1829 18.00 457
M8418-12FEK 84.00 2134 18.00 457 84.00 2134 18.00 457
M8424-12FEK 84.00 2134 24.00 610 84.00 2134 24.00 610
Flat End Plate/Barrier
M7218-12FBK 72.00 1829 18.25 464 72.00 1829 18.00 457
M8418-12FBK 84.00 2134 18.25 464 84.00 2134 18.00 457
M8424-12FBK 84.00 2134 24.25 464 84.00 2134 24.00 610
Gasket Kit
M7218-12FGK 72.00 1829 18.00 457 72.00 1829 18.00 457
M8418-12FGK 84.00 2134 18.00 457 84.00 2134 18.00 457
M8424-12FGK 84.00 2134 24.00 610 84.00 2134 24.00 610
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Disconnect Encl.
330 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Ground-Mount Enclosures
Type 12 Modular Free-Standing
Illustration Sheet
see universal Disconnect Encl.
opening detail
panel
panel
The dimensional information provided in this drawing is derived from information supplied by the
manufacturer of the equipment to be installed. Fit and function of all equipment should be checked
before and after installation to assure proper and safe operation and compliance with the applicable
regulations, codes and standards.
Universal opening must be filled with an operator adapter kit for the specific brand and type of
disconnect being used, (see page 451).
B A
C 9.31
(236)
9.93
(252)
3.37
(86)
4.00
(102)
2.75
(70)
3.00
(76) 1.62
(41)
1.12
(28)
.28 D
(7)
(TYP)
D
Flange Mounting Universal Opening Detail
this area
represents
disconnect
switch or
circuit
breaker
Important Note
When ordering modular enclosure systems, be sure to
include all the necessary components.
1. Disconnect master or slave enclosure
2. Gasket kits and/or end plates (see page 330)
3. Operator adapter plates MUST be ordered for the
specific brand and type of disconnect being used,
(see page 451)
Disconnect switch (or circuit breaker), operating handle and
operating mechanism are not furnished with enclosure, see
disconnect ordering information, pages 331 - 339.
Notes: Refer to disconnect table for associated dimensions. Dimensions are in inches.
Millimeters shown are for reference only. Data subject to change without notice.
331 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Disconnect Encl.
Free-Standing Enclosures
Disconnect Ordering Information
Allen-Bradley® †
Allen-Bradley† Fuse Clip Rating Fuse Enclosure Height
Mechanism Amp Class 72 84 90 C D(1)
for Switches Amp Volt AB AB AB
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
DS30 30A (non) (non) -- 11.87 301 10.00 254 17.37 441 15.50 394 20.37 517 18.50 470 4.00 102 6.75 171
DS30 30A 30A 250V H,K,R 11.87 301 10.00 254 17.37 441 15.50 394 20.37 517 18.50 470 5.25 133 6.75 171
DS30 30A 30A 600V H,K,R 11.87 301 10.00 254 17.37 441 15.50 394 20.37 517 18.50 470 8.00 203 6.75 171
DS30 30A 30A 600V J 11.87 301 10.00 254 17.37 441 15.50 394 20.37 517 18.50 470 5.25 133 6.75 171
DS30 30A 60A 250V H,K 11.87 301 10.00 254 17.37 441 15.50 394 20.37 517 18.50 470 6.00 152 6.75 171
DS30 30A 60A 600V H,K 11.87 301 10.00 254 17.37 441 15.50 394 20.37 517 18.50 470 8.50 216 6.75 171
DS30 30A 60A 600V J 11.87 301 10.00 254 17.37 441 15.50 394 20.37 517 18.50 470 5.50 140 6.75 171
DS60 60A (non) (non) -- 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 4.00 102 6.75 171
DS60 60A 30A 600V H,K,R 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 8.00 203 6.75 171
DS60 60A 60A 250V H,K,R 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 6.00 152 6.75 171
DS60 60A 60A 600V H,K,R 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 8.50 216 6.75 171
DS60 60A 60A 600V J 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 5.50 140 6.75 171
DS60 60A 100A 250V H,K 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 8.50 216 6.75 171
DS60 60A 100A 600V H,K 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 10.50 267 6.75 171
DS60 60A 100A 600V J 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 7.25 184 6.75 171
DS100 100A (non) (non) -- 11.87 301 8.37 213 17.37 441 13.87 390 20.37 517 16.87 428 4.75 121 8.00 203
DS100 100A 100A 250V H,K,R 11.87 301 8.37 213 17.37 441 13.87 390 20.37 517 16.87 428 10.50 267 8.00 203
DS100 100A 100A 600V H,K,R 11.87 301 8.37 213 17.37 441 13.87 390 20.37 517 16.87 428 12.50 318 8.00 203
DS100 100A 100A 600V J 11.87 301 8.37 213 17.37 441 13.87 390 20.37 517 16.37 416 9.25 235 8.00 203
DS100 100A 200A 250V H,K 11.87 301 8.37 213 17.37 441 13.87 390 20.37 517 16.87 428 11.25 286 8.00 203
DS100 100A 200A 600V H,K 11.87 301 8.37 213 17.37 441 13.87 390 20.37 517 16.87 428 13.75 349 8.00 203
DS100 100A 200A 600V J 11.87 301 8.37 213 17.37 441 13.87 390 20.37 517 16.87 428 10.00 254 8.00 203
DS200 200A (non) (non) -- 10.43 265 6.00 152 15.93 405 11.50 292 18.93 481 14.50 368 10.00 254 11.00 279
DS200 200A 200A 250V H,K,R 10.43 265 6.00 152 15.93 405 11.50 292 18.93 481 14.50 368 15.00 381 11.00 279
DS200 200A 200A 600V H,K,R 10.43 265 6.00 152 15.93 405 11.50 292 18.93 481 14.50 368 17.25 438 11.00 279
DS200 200A 200A 600V J 10.43 265 6.00 152 15.93 405 11.50 292 18.93 481 14.50 368 13.50 343 11.00 279
DS200 200A 400A 250V H,K 10.43 265 6.00 152 15.93 405 11.50 292 18.93 481 14.50 368 15.75 400 11.00 279
DS200 200A 400A 600V H,K 10.43 265 6.00 152 15.93 405 11.50 292 18.93 481 14.50 368 18.75 476 11.00 279
DS200 200A 400A 600V J 10.43 265 6.00 152 15.93 405 11.50 292 18.93 481 14.50 368 14.25 362 11.00 279
DS400 400A (non) (non) -- * * ** 15.93 405 9.62 244 18.93 481 12.62 321 10.75 273 11.00 279
DS400 400A 400A 250V H,K,R * * ** 15.93 405 9.62 244 18.93 481 12.62 321 16.25 413 11.00 279
DS400 400A 400A 600V H,K,R * * ** 15.93 405 9.62 244 18.93 481 12.62 321 19.25 489 11.00 279
DS400 400A 400A 600V J * * ** 15.93 405 9.62 244 18.93 481 12.62 321 14.75 375 11.00 279
Allen-Bradley† Circuit Breaker Type Enclosure Height
Mechanism for Amp 72 84 90 C D(1)
Circuit Breakers Manufacturer Frame(s) A BA BA B
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
M40 150A General Electric TED,THED,TEC 11.87 301 11.25 286 17.37 441 16.75 425 20.37 517 19.75 502 5.75 146 4.75 121
M40 150A Westinghouse F (series C) 11.87 301 11.25 286 17.37 441 16.75 425 20.37 517 19.75 502 5.00 127 4.75 121
M50 250A Westinghouse J (series C) 11.87 301 10.87 276 17.37 441 16.37 416 20.37 517 19.37 492 9.75 248 5.00 127
M60 400A Westinghouse K (series C) 11.87 301 10.62 270 17.37 441 16.12 409 20.37 517 19.12 486 9.75 248 6.25 159
1494V / 1494U Disconnect Mechanism
* Do not install disconnects in this height enclosure
(1) Dimension “D” does not include space for auxiliary switches.
The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed.
Fit and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the
applicable regulations, codes and standards.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
† Marks are the property of their respective owners.
332 Eaton B-Line series electrical enclosures
Disconnect Enclosures
Allen-Bradley† Fuse Clip Rating Fuse Enclosure Height
Mechanism Amp Class 72 84 90 C D(1)
for Switches Amp Volt ABAB A B
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
N30 30A (non) (non) -- 9.87 251 9.37 238 15.37 390 14.87 378 18.37 467 17.87 454 4.75 121 6.50 165
NF30 30A 30A 250V H,K,R 9.87 251 9.37 238 15.37 390 14.87 378 18.37 467 17.87 454 6.50 165 6.50 165
NF30 30A 30A 600V H,K,R 9.87 251 9.37 238 15.37 390 14.87 378 17.37 441 17.87 454 9.25 235 6.50 165
NF30 30A 30A 600V J 9.87 251 9.37 238 15.37 390 14.87 378 18.37 467 17.87 454 6.50 165 6.50 165
NF30 30A 60A 250V H,K,R 9.87 251 9.37 238 15.37 390 14.87 378 18.37 467 17.87 454 7.25 184 6.50 165
NF30 30A 60A 600V H,K,R 9.87 251 9.37 238 15.37 390 14.87 378 18.37 467 17.87 454 9.75 248 6.50 165
NF30 30A 60A 600V J 9.87 251 9.37 238 15.37 390 14.87 378 18.37 467 17.87 454 6.75 171 6.50 165
N60 60A (non) (non) -- 9.87 251 8.62 219 15.37 390 14.12 359 18.37 467 17.12 435 4.75 121 6.50 165
NF60 60A 30A 600V H,K,R 9.87 251 8.62 219 15.37 390 14.12 359 18.37 467 17.12 435 10.50 267 6.50 165
NF60 60A 60A 250V H,K,R 9.87 251 8.82 219 15.37 390 14.12 359 18.37 467 17.12 435 8.50 216 6.50 165
NF60 60A 60A 600V H,K,R 9.87 251 8.62 219 15.37 390 14.12 359 18.37 467 17.12 435 11.00 279 6.50 165
NF60 60A 60A 600V J 9.87 251 8.62 219 15.37 390 14.12 359 18.37 467 17.12 435 57.75 1467 6.50 165
NF60 60A 100A 250V H,K,R 9.87 251 8.62 219 15.37 390 14.12 359 18.37 467 17.12 435 11.00 279 6.50 165
NF60 60A 100A 600V H,K,R 9.87 251 8.62 219 15.37 390 14.12 359 18.37 467 17.12 435 13.00 330 6.50 165
NF60 60A 100A 600V J 9.87 251 8.62 219 15.37 390 14.12 359 18.37 467 17.12 435 9.75 248 6.50 165
N100 100A (non) (non) -- 9.87 251 6.75 171 15.37 390 12.25 311 18.37 467 15.25 387 4.75 121 7.25 184
NF100 100A 100A 250V H,K,R 9.87 251 6.75 171 15.37 390 12.25 311 18.37 467 15.25 387 11.50 292 7.50 191
NF100 100A 100A 600V H,K,R 9.87 251 6.75 171 15.37 390 12.25 311 18.37 467 15.25 387 13.50 343 7.50 191
NF100 100A 100A 600V J 9.87 251 6.75 171 15.37 390 12.25 311 18.37 467 15.25 387 10.25 260 7.50 191
NF100 100A 200A 250V H,K,R 9.87 251 6.75 171 15.37 390 12.25 311 18.37 467 15.25 387 12.25 311 7.75 197
NF100 100A 200A 600V H,K,R 9.87 251 6.75 171 15.37 390 12.25 311 18.37 467 15.25 387 14.75 375 7.75 197
NF100 100A 200A 600V J 9.87 251 6.75 171 15.37 390 12.25 311 18.37 467 15.25 387 11.00 279 7.75 197
N200 200A (non) (non) -- 8.56 217 5.12 130 14.06 357 10.62 270 17.06 433 13.62 346 7.25 184 10.50 267
NF200 200A 200A 250V H,K,R 8.56 217 5.12 130 14.06 357 10.62 270 17.06 433 13.62 346 15.00 381 10.50 267
NF200 200A 200A 600V H,K,R 8.56 217 5.12 130 14.06 357 10.62 270 17.06 433 13.62 346 17.50 445 10.50 267
NF200 200A 200A 600V J 8.56 217 5.12 130 14.06 357 10.62 270 17.06 433 13.62 346 13.75 349 10.50 267
NF200 200A 400A 250V H,K,R 8.56 217 5.12 130 14.06 357 10.62 270 17.06 433 13.62 346 16.50 419 11.00 279
NF200 200A 400A 600V H,K,R 8.56 217 5.12 130 14.06 357 10.62 270 17.06 433 13.62 346 19.50 495 11.00 279
NF200 200A 400A 600V J 8.56 217 5.12 130 14.06 357 10.62 270 17.06 433 13.62 346 15.00 381 11.00 279
1494D Disconnect Mechanism
Allen-Bradley† Circuit Breaker Type Enclosure Height
Mechanism for Amp 60 72 90 C D(1)
Circuit Breakers Manufacturer Frame(s) AB A B A B
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
N4/N40 150A General Electric TED,THED,TEC 9.87 251 9.25 235 15.37 390 14.75 375 18.37 467 17.75 451 5.87 149 4.62 117
N5/N55 225A General Electric TFK,THFK,TFC 9.87 251 8.50 216 15.37 390 14.00 356 18.37 467 17.00 432 8.87 225 4.75 121
N4/N40 150A Westinghouse F (series C) 9.87 251 9.25 235 15.37 390 14.75 375 18.37 467 17.75 451 5.87 149 4.62 117
N5/N50 250A Westinghouse J (series C) 9.87 251 8.50 216 15.37 390 14.00 356 18.37 467 17.00 432 8.87 225 4.75 121
N5/N60 400A Westinghouse K (series C) 9.87 251 8.50 216 15.37 390 14.00 356 18.37 467 17.00 432 8.87 225 5.87 149
Disconnect Encl.
Free-Standing Enclosures
Disconnect Ordering Information
Allen-Bradley †
1494F Disconnect Mechanism
* Do not install disconnects in this height enclosure
(1) Dimension “D” does not include space for auxiliary switches.
The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed.
Fit and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the
applicable regulations, codes and standards.
† Marks are the property of their respective owners.
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
333 B-Line series electrical enclosures Eaton
Disconnect Enclosures
Disconnect Encl.
Free-Standing Enclosures
Disconnect Ordering Information
Cutler-Hammer® †
C361 Disconnect Mechanism
* Do not install disconnects in this height enclosure
(1) Wire bending space “B” does not allow the use of cable larger than 300 MCM in 72H enclosures.
(2) Wire bending space “B” does not allow the use of cable larger than 250 MCM in 72H enclosures.
(3) Wire bending space “B” does not allow the use of cable larger than 300 MCM in 84H enclosures.
(4) Wire bending space “B” does not allow the use of 4 cables per terminal larger than 350 MCM in 90H enclosures.
(5) Wire bending space “B” does not allow the use of Westinghouse terminals TA1201NB1 in 84H or 90H enclosures
The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed.
Fit and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the
applicable regulations, codes and standards.
Cutler-Hammer† Fuse Clip Rating Fuse Enclosure Height
Mechanism Amp Class 72 84 90 C D(1)
for Switches Amp Volt A B AB A B
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
NC 30A (non) (non) -- 11.87 301 10.50 267 17.37 441 16.00 406 20.37 517 19.00 483 4.75 121 6.25 159
SC21 30A 30A 250V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 20.37 517 19.00 483 7.75 197 6.25 159
SC61 30A 30A 600V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 20.37 517 19.00 483 7.75 197 6.25 159
SC61 30A 60A 250V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 20.37 517 19.00 483 8.25 210 6.25 159
ND 60A (non) (non) -- 11.87 301 10.50 267 17.37 441 16.00 406 20.37 517 19.00 483 4.75 121 6.25 159
SD22 60A 30A 600V J 11.87 301 10.50 267 17.37 441 16.00 406 20.37 517 19.00 483 7.75 197 6.25 159
SD22 60A 60A 250V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 20.37 517 19.00 483 8.25 210 6.25 159
SD62 60A 60A 600V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 20.37 517 19.00 483 8.25 210 6.25 159
SD62 60A 60A 600V J 11.87 301 10.50 267 17.37 441 16.00 406 20.37 517 19.00 483 8.00 203 6.25 159
NE 100A (non) (non) -- 11.87 301 10.12 257 17.37 441 15.62 397 20.37 517 18.62 473 4.25 108 7.50 191
SE263 100A 100A 250V H,K,R 11.87 301 10.12 257 17.37 441 15.62 397 20.37 517 18.62 473 9.00 229 7.50 191
SE263 100A 100A 600V H,K,R 11.87 301 10.12 257 17.37 441 15.62 397 20.37 517 18.62 473 9.00 229 7.50 191
SE263 100A 100A 600V J 11.87 301 10.12 257 17.37 441 15.62 397 20.37 517 18.62 473 7.75 197 7.50 191
NF 200A (non) (non) -- 11.87 301 8.12 257 17.37 441 13.62 397 20.37 517 16.62 422 13.25 337 10.25 260
SF264 200A 200A 250V H,K,R 11.87 301 8.12 257 17.37 441 13.62 397 20.37 517 16.62 422 13.25 337 10.25 260
SF264 200A 200A 600V H,K,R 11.87 301 8.12 257 17.37 441 13.62 397 20.37 517 16.62 422 13.25 337 10.25 260
C371 Disconnect Mechanism
Cutler-Hammer† Circuit Breaker Type Enclosure Height
Mechanism for Amp 72 84 90 C D(1)
Circuit Breakers Manufacturer Frame(s) AB ABA B
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
C371E 150A Cutler-Hammer HMCP,FS,FH 11.87 301 11.62 295 17.37 441 17.12 435 20.37 517 20.12 511 6.00 152 5.75 146
C371F (1) 225A Cutler-Hammer HMCP,JS,JH,JL 11.87 301 11.50 292 17.37 441 17.00 432 20.37 517 20.00 508 11.00 279 8.25 210
C371F (1) 400A Cutler-Hammer HMCP,KS,KH 11.87 301 11.00 279 17.37 441 16.50 419 20.37 517 19.50 495 9.75 248 8.25 210
C371G (2) 600A Cutler-Hammer LS,LH 11.87 301 9.37 238 17.37 441 14.87 378 20.37 517 17.87 454 8.50 216 12.00 305
C371K (3) 800A Cutler-Hammer MS,MH ** ** 17.37 441 11.37 289 20.37 517 14.37 365 10.25 260 12.00 305
C371K (3) 1200A Cutler-Hammer NS,NH ** ** 17.37 441 11.37 289 20.37 517 14.37 365 10.25 260 12.00 305
C371E 150A Westinghouse F (series C) 11.87 301 11.62 295 17.37 441 17.12 435 20.37 517 20.12 511 6.00 152 5.75 146
C371F (1) 250A Westinghouse J (series C) 11.87 301 11.50 292 17.37 441 17.00 432 20.37 517 20.00 508 9.00 229 8.25 210
C371F (1) 400A Westinghouse K (series C) 11.87 301 11.00 279 17.37 441 16.50 419 20.37 517 19.50 495 9.75 248 8.25 210
C371G (2) 600A Westinghouse LA,LC 11.87 301 9.37 238 17.37 441 14.87 378 20.37 517 17.87 454 8.50 216 12.00 305
C371K (3) 800A Westinghouse MC ** ** 17.37 441 11.37 289 20.37 517 14.37 365 10.25 260 12.00 305
C371K (3)(4)(5) 12000A Westinghouse NC ** ** 17.37 441 11.37 289 20.37 517 14.37 365 10.25 260 12.00 305
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
† Marks are the property of their respective owners.
334 Eaton B-Line series electrical enclosures
Disconnect Enclosures
