Disconnect Encl.

Free-Standing Enclosures

Disconnect Ordering Information

General Electric †

TDA † Disconnects

* Do not install disconnects in this height enclosure.

The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed.

Fit and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the

applicable regulations, codes and standards.

General Electric† Fuse Clip Rating Fuse Enclosure Height

Mechanism Amp Class 72 84 90 C D

for Switches Amp Volt A B AB A B

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

NC 30A (non) (non) -- 11.87 301 10.50 267 17.37 441 16.00 406 20.37 517 19.00 483 4.75 121 6.25 159

TDOM1A 30A (non) (non) -- 11.87 301 12.37 314 17.37 441 17.87 45 20.37 517 20.87 530 7.00 178 5.50 140

TDOM1A 30A 30A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 7.00 178 5.50 140

TDOM1B 30A 30A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM1B 30A 60A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM1B 30A 60A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM1A 60A (non) (non) -- 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 7.00 178 5.50 140

TDOM1B 60A 60A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM1B 60A 60A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM1B 60A 100A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM1B 60A 100A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM1A 100A (non) (non) -- 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 7.00 178 5.50 140

TDOM1B 100A 100A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM1B 100A 100A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM1B 100A 200A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM1B 100A 200A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 20.37 517 20.87 530 11.50 292 5.50 140

TDOM2 200A (non) (non) -- 11.87 301 9.75 248 17.37 441 15.25 387 20.37 517 18.25 464 7.00 178 9.25 235

TDOM2 200A 200A 250V H,R 11.87 301 9.75 248 17.37 441 15.25 387 20.37 517 18.25 464 15.50 394 9.25 235

TDOM2 200A 200A 600V H,R 11.87 301 9.75 248 17.37 441 15.25 387 20.37 517 18.25 464 15.50 394 9.25 235

General Electric† Enclosure Height

Mechanism for Amp Circuit Breaker Type 72 84 90 C D

Circuit Breakers ABAB AB

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

TDOM1A 150A TEB,TEC,TED,THED 11.87 301 11.25 286 17.37 441 16.75 425 20.37 517 19.75 502 7.00 178 5.50 140

TDOM1B 150A TB1,TEC,TECL 11.87 301 11.25 286 17.37 441 16.75 425 20.37 517 19.75 502 11.50 292 5.50 140

TDOM1C 150A TEL 11.87 301 11.25 286 17.37 441 16.75 425 20.37 517 19.75 502 7.00 178 5.50 140

TDOM1D 150A THCL1 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 7.00 178 5.50 140

TDOM3 225A TFJ,TFK,THFK,TFL 11.87 301 10.87 276 17.37 441 16.37 416 20.35 517 19.37 492 10.50 267 6.00 152

TDOM4 400A TJJ,TJK4,THJK4,TJL4V 11.87 301 10.00 254 17.37 441 15.50 394 20.35 517 18.50 470 8.25 210 9.50 241

TDOM4 600A TJK6,THJK6,TJ4V,TJL4V 11.87 301 10.00 254 17.37 441 15.50 394 20.35 517 18.50 470 8.25 210 9.50 241

TDOM5 400A TB4,TJH6S 11.87 301 10.00 254 17.37 441 15.50 394 20.35 517 18.50 470 14.25 362 9.50 241

TDOM6 225A TLB2,THLC2 * * ** 17.37 441 14.87 378 20.37 517 17.87 454 11.75 298 9.50 241

TDOM6 400A TLB4,THLC4 * * ** 17.37 441 13.50 343 20.37 517 16.50 419 11.75 298 9.50 241

TDOM6 800A TKMA,THKMA,TK4V * * * * ** * * 20.37 517 17.87 454 11.75 298 9.50 241

TDOM6 1200A TK4V,THK4V * * * * ** * * 20.37 517 17.87 454 11.75 298 9.50 241

TDOM7 600A TB6 * * ** 17.37 * 11.75 298 20.37 517 14.75 375 18.25 464 9.50 241

TDOM7 800A TB8 * * ** 17.37 * 11.75 298 20.37 517 14.75 375 18.25 464 9.50 241

TDOM7 1200A TKL12S * * * * ** * * 20.37 517 14.75 375 18.25 464 9.50 241

† Marks are the property of their respective owners.

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

335 B-Line series electrical enclosures Eaton

Disconnect Enclosures

I-T-E† Circuit Enclosure Height

Encl. Mechanism for Cable Amp Breaker Device A C(1) D(2)

Depth Circuit Breakers Length Frame Height 72 84 90 nom min max min max

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

FHOE036 36 125A ED 6.37 162 11.87 301 17.37 441 20.37 517 5.37 136 -2.75 -70 13.50 343 3.00 76 9.75 248

FHOE036 36 125A CED 9.62 244 11.87 301 17.37 441 20.37 517 8.50 216 .06 2 16.87 428 3.00 76 9.75 248

FHOF036 36 250A FD 9.50 241 11.87 301 17.37 441 20.37 517 5.62 143 2.43 62 13.87 352 4.50 114 8.50 216

18 FHOF036 36 250A CFD 14.12 359 11.87 301 17.37 441 20.37 517 10.25 260 7.25 184 18.62 473 4.50 114 8.50 216

FHOJ036 36 400A, 600A JD, LD 11.00 279 11.87 301 17.37 441 20.37 517 5.25 133 -2.87 -73 13.43 341 7.50 191 10.12 257

FHOJ036 36 400A, 600A CJD 17.87 454 11.87 301 17.37 441 20.37 517 12.12 308 4.12 105 20.37 517 7.50 191 10.12 257

FHOE036 36 125A ED 6.37 162 11.87 301 17.37 441 20.37 517 5.37 136 1.37 35 10.75 273 3.00 76 6.37 162

FHOE036 36 125A CED 9.62 244 11.87 301 17.37 441 20.37 517 8.50 216 4.62 117 14.00 356 3.00 76 6.37 162

FHOF036 36 250A FD 9.50 241 11.87 301 17.37 441 20.37 517 5.62 143 1.62 41 11.00 356 4.50 114 5.50 140

20 FHOF036 36 250A CFD 14.12 359 11.87 301 17.37 441 20.37 517 10.25 260 6.43 163 15.87 403 4.50 114 5.50 140

FHOJ036 36 400A, 600A JD, LD 11.00 279 11.87 301 17.37 441 20.37 517 5.25 133 0.00 0 10.62 270 7.50 191 7.25 184

FHOJ036 36 400A, 600A CJD 17.87 454 11.87 301 17.37 441 20.37 517 12.12 308 6.93 176 17.50 445 7.50 191 7.25 184

* 48 125A ED 6.37 162 11.87 301 17.37 441 20.37 517 5.37 136 -15.37 -390 26.25 667 3.00 76 24.43 621

* 48 125A CED 9.62 244 11.87 301 17.37 441 20.37 517 8.50 216 -12.00 -305 29.50 749 3.00 76 24.43 621

* 48 250A FD 9.50 241 11.87 301 17.37 441 20.37 517 5.62 143 -15.00 -381 26.50 673 4.50 114 23.00 584

18 * 48 250A CFD 14.12 359 11.87 301 17.37 441 20.37 517 10.25 260 -10.25 -260 30.37 771 4.50 114 23.00 584

* 48 400A, 600A JD, LD 11.00 279 11.87 301 17.37 441 20.37 517 5.25 133 -15.43 -393 26.12 663 7.50 191 24.50 622

* 48 400A, 600A CJD 17.87 454 11.87 301 17.37 441 20.37 517 12.12 308 -8.50 -216 33.00 838 7.50 191 24.50 622

FHON048 48 800A, 1200A MD, ND 16.00 406 11.87 301 17.37 441 20.37 517 8.12 206 -5.12 -130 21.43 544 9.00 229 20.50 521

* 48 125A ED 6.37 162 11.87 301 17.37 441 20.37 517 5.37 136 -14.87 -378 25.25 641 3.00 76 23.43 595

* 48 125A CED 9.62 244 11.87 301 17.37 441 20.37 517 8.50 216 -11.50 -292 28.50 724 3.00 76 23.43 595

* 48 250A FD 9.50 241 11.87 301 17.37 441 20.37 517 5.62 143 -14.50 -368 25.50 648 4.50 114 22.00 559

20 * 48 250A CFD 14.12 359 11.87 301 17.37 441 20.37 517 10.25 260 -9.75 -248 30.37 771 4.50 114 22.00 559

* 48 400A, 600A JD, LD 11.00 279 11.87 301 17.37 441 20.37 517 5.25 133 -14.93 -379 25.12 638 7.50 191 23.62 600

* 48 400A, 600A CJD 17.87 454 11.87 301 17.37 441 20.37 517 12.12 308 -8.00 -203 32.00 813 7.50 191 23.62 600

FHON048 48 800A 1200A MD, ND 16.00 406 11.87 301 17.37 441 20.37 517 8.12 206 -5.12 -130 20.93 532 9.00 229 21.00 533

* 48 125A ED 6.37 162 11.87 301 17.37 441 20.37 517 5.37 136 -13.37 -340 23.25 591 3.00 76 20.62 524

* 48 125A CED 9.62 244 11.87 301 17.37 441 20.37 517 8.50 216 -10.00 -254 26.50 673 3.00 76 20.62 524

* 48 250A FD 9.50 241 11.87 301 17.37 441 20.37 517 5.62 143 -13.00 -330 23.50 597 4.50 114 19.37 492

24 * 48 250A CFD 14.12 359 11.87 301 17.37 441 20.37 517 10.25 260 -8.25 -210 28.37 721 4.50 114 19.37 492

* 48 400A, 600A JD, LD 11.00 279 11.87 301 17.37 441 20.37 517 5.25 133 -13.43 -341 23.12 587 7.50 191 20.93 532

* 48 400A, 600A CJD 17.87 454 11.87 301 17.37 441 20.37 517 12.12 308 -6.50 -165 30.00 762 7.50 191 20.93 532

FHON048 48 800A, 1200A MD,ND 26.00 406 11.87 301 17.37 441 20.37 517 8.12 206 -3.12 -79 19.93 506 9.00 229 20.50 521

Disconnect Encl.

Free-Standing Enclosures

Disconnect Ordering Information

I-T-E Siemens® †

Disconnect Cable Circuit Breaker Types Mechanism Length

FHOE036 36 ED2 ,ED4, ED6, HED4, HED6, ED6ETI

FHOE036 36 CED6, CED6ETI

FHOF036 36 FD6, FXD6, HFD6, FXD6ETI

FHOF036 36 CFD6, CFD6ETI

FHOJ036 36 JD2, JD6, JXD6, HJD6, JXD6ETI, LD6,LXD6, HLD6, LXD6ETI, SHJD6, SLD6, SHLD6

FHOJ036 36 CJD6, CJD6ETI, CLD6, CLD6ETI,SCJD6,SCLD6

FHON048 48 MD6, HMD6, CMD6, MXD6ETI, CMD6ETI, SMD6, SHMD6, SCMD6, ND6, HND6,CND6,SND6,SCND6

MAX-FLEX † Disconnect Mechanism

I-T-E SIEMENS † MAX-FLEX † Disconnect Mechanism

* Non-standard mechanism with 48 inch operating cable must be specified.

(1) Flexible operating cable allows disconnect to be mounted within min and max of “C” dimension when “D” is minimum.

(2) Flexible operating cable allows disconnect to be mounted within min and max of “D” dimension when “C” is nominal

The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to

be installed. Fit and function of all equipment should be checked before and after installation to assure proper and safe

operation and compliance with the applicable regulations, codes and standards.

Notes: Flexible cable allows for variable disconnect mounting and adequate wire bending space must be maintained.

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

† Marks are the property of their respective owners.

336 Eaton B-Line series electrical enclosures

Disconnect Enclosures

Disconnect Encl.

Free-Standing Enclosures

Disconnect Ordering Information

Square D® †

Square D† Fuse Clip Rating Fuse Enclosure Height

Mechanism Amp Class 72 84 90 C D

for Switches Amp Volt A B A B AB

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

RC-1 30A (non) (non) -- 11.87 301 11.75 298 17.37 441 17.18 436 20.37 517 20.18 513 3.25 83 7.25 184

RC-2 30A 30A 250V H,K,R 11.87 301 11.75 298 17.37 441 17.18 436 20.37 517 20.18 513 5.00 127 7.25 184

RC-3 30A 30A 600V H,K,R 11.87 301 11.75 298 17.37 441 17.18 436 20.37 517 20.18 513 8.00 203 7.25 184

RC-3 30A 30A 600V J 11.87 301 11.75 298 17.37 441 17.18 436 20.37 517 20.18 513 5.00 127 7.25 184

RC-3 30A 60A 250V H,K,R 11.87 301 11.75 298 17.37 441 17.18 436 20.37 517 20.18 513 6.00 152 7.25 184

TC-1 30A (non) (non) -- 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 5.75 146 6.25 159

TC-2 30A 30A 250V H,K,R 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 5.75 146 6.25 159

TC-3 30A 30A 600V H,K,R 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 7.75 197 6.25 159

TC-3 30A 30A 600V J 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 5.75 146 6.25 159

TC-3 30A 60A 250V H,K,R 11.87 301 9.87 251 17.37 441 15.37 390 20.37 517 18.37 467 6.00 152 6.25 159

TD-1 60A (non) (non) -- 11.87 301 10.75 273 17.37 441 16.25 413 20.37 517 19.25 489 6.50 165 6.75 171

TD-2 60A 30A 600V H,K,R 11.87 301 10.75 273 17.37 441 16.25 413 20.37 517 19.25 489 8.50 216 6.75 171

TD-2 60A 60A 250V H,K,R 11.87 301 10.75 273 17.37 441 16.25 413 20.37 517 19.25 489 6.50 165 6.75 171

TD-3 60A 60A 600V H,K,R 11.87 301 10.75 273 17.37 441 16.25 413 20.37 517 19.25 489 9.00 229 6.75 171

TD-3 60A 60A 600V J 11.87 301 10.75 273 17.37 441 16.25 413 20.37 517 19.25 489 6.50 165 6.75 171

TE-1 100A (non) (non) -- 11.87 301 10.50 273 17.37 441 16.00 406 20.37 517 19.00 483 4.75 121 8.50 216

TE-2 100A 100A 250V H,K,R 11.87 301 10.50 273 17.37 441 16.00 406 20.37 517 19.00 483 7.50 191 8.50 216

TE-2 100A 100A 600V H,K,R 11.87 301 10.50 273 17.37 441 16.00 406 20.37 517 19.00 483 9.50 241 8.50 216

TE-2 100A 100A 600V J 11.87 301 10.50 273 17.37 441 16.00 406 20.37 517 19.00 483 6.25 159 8.50 216

TE-3 100A 200A 600V J 11.87 301 10.50 273 17.37 441 16.00 406 20.37 517 19.00 483 13.75 349 8.50 216

TF-1 200A (non) (non) -- 11.87 301 9.12 232 17.37 441 14.62 371 20.37 517 17.62 448 5.50 140 11.75 298

TF-2 200A 200A 250V H,K,R 11.87 301 9.12 232 17.37 441 14.62 371 20.37 517 17.62 448 11.50 292 11.75 298

TF-2 200A 200A 600V H,K,R 11.87 301 9.12 232 17.37 441 14.62 371 20.37 517 17.62 448 14.00 356 11.75 298

TF-2 200A 200A 600V J 11.87 301 9.12 232 17.37 441 14.62 371 20.37 517 17.62 448 10.25 260 11.75 28

TF-3 200A 400A 600V J 11.87 301 9.12 232 17.37 441 14.62 371 20.37 517 17.62 448 14.50 368 11.75 298

Square D† Enclosure Height

Mechanism for Amp Circuit Breaker Type 72 84 90 C D

Circuit Breakers A B A B AB

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

RN-1 100A FAL,FHL,FCL 7.87 200 6.87 174 17.37 441 16.37 416 20.37 517 19.37 492 5.25 133 5.50 140

RP-1 250A KAL,KHL,KCL 7.87 200 6.62 168 17.37 441 17.12 435 20.37 517 20.12 511 7.25 184 5.75 146

RR-1 400A LAL,LHL,Q4L * * ** 17.37 441 12.75 324 20.37 517 15.75 400 7.75 197 9.00 229

RR-2 400A ILL * * ** 17.37 441 17.12 435 20.37 517 20.12 511 11.00 279 15.75 400

RT-1 800A MEL * * ** 17.37 441 12.62 321 20.37 517 15.62 397 9.25 235 12.00 305

RT-1 1000A MAL,MHL * * ** 17.37 441 12.62 321 20.37 517 16.62 422 9.25 235 12.00 305

9422 Disconnect Mechanism

* Do not install disconnects in this height enclosure.

The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed.

Fit and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the

applicable regulations, codes and standards.

† Marks are the property of their respective owners.

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

337 B-Line series electrical enclosures Eaton

Disconnect Enclosures

Disconnect Encl.

Free-Standing Enclosures

Disconnect Ordering Information

ALLEN-BRADLEY †

Standard enclosures designed to accept variable depth

type 1494V / 1494U.

Allen-Bradley† 1494V / 1494U disconnect switch:

1.Disconnect switch.

2.Operating mechanism.

3.Operating handle.

4.Fuse block kit, (if required).

5.Fuse clip kit, (if required).

6.Line and Load connectors, (if necessary).

7.Connecting rod.

Allen-Bradley† 1494V 1494U circuit breaker:

1.Circuit breaker.

2.Operating mechanism.

3.Operating handle.

4.Line and load connectors, (if necessary).

5.Connecting rod.

NOTE: Standard enclosures designed to accept fixed

depth type 1494F or 1494D.

Allen-Bradley† 1494F disconnect switch:

1.Disconnect switch.

2.Operating mechanism.

3.Operating handle.

4.Fuse block kit, (if required).

5.Fuse clip kit, (if required).

6.Line and load connectors, (if necessary).

Allen-Bradley† 1494D circuit breaker:

1.Circuit breaker.

2.Operating mechanism.

3.Operating handle.

4.Line and load connectors, (if necessary).

5.Slide mechanism

CUTLER-HAMMER †

Standard enclosures designed to accept variable depth

type C361 or C371.

Cutler-Hammer† C361 disconnect switch:

1.Disconnect switch.

2.Operating mechanism.

3.Operating handle.

4.Fuse clip kit, (if required).

5.Line and load connectors, (if necessary) .

NOTE: Items 1, 2 and 3 can be ordered as an assembly.

Cutler-Hammer† C371 circuit breaker:

1.Circuit breaker.

2.Operating mechanism.

3.Operating handle.

4.Line and load connectors, (if necessary).

NOTE: Items 2 and 3 can be ordered as an assembly.

GENERAL ELECTRIC †

Standard enclosures designed to accept variable depth

type TDA.

General Electric† TDA disconnect switch:

1.Disconnect switch, (QMR, QMW).

2.Operating mechanism.

3.Operating handle TDA1.

4.Fuse clip kit or no-fuse kit, (if required).

5.Line and load connectors, (if necessary).

6.Extended length drive rod, ( if required).

NOTE:These items can be ordered as an assembly.

General Electric† TDA circuit breaker:

1.Circuit breaker.

2.Operating mechanism.

3.Operating handle TDA1.

4.Line and load connectors, (if necessary).

5.Extended length drive rods, (if required).

I-T-E SIEMENS †

Standard enclosures designed to accept Max-Flex†

type FHO.

I-T-E† Max-Flex† circuit breaker:

1.Circuit breaker.

2.Operating mechanism.

3.Operating handle.

4.Line and load connectors, (if necessary).

5.Operating cable.

NOTE: Items 2, 3 and 5 can be ordered as an assembly,

standard with a 36 inch long operating cable. All 24

inch deep enclosures require a 48 inch long cable.

Notes: Data subject to change without notice.

† Marks are the property of their respective owners.

338 Eaton B-Line series electrical enclosures

Disconnect Enclosures

Disconnect Encl.

Free-Standing Enclosures

Disconnect Ordering Information

SQUARE D †

Standard enclosures designed to accept variable depth

type 9422.

Square D† 9422 disconnect switch:

1. Disconnect switch.

2. Operating mechanism.

3. Operating handle.

4. Fuse clip kit, (if required).

5. Line and load connectors, (if necessary).

6. Connecting rod.

Square D† 9422 circuit breaker:

1. Circuit Breaker.

2. Operating mechanism.

3. Operating handle.

4. Line and load connectors, (if necessary).

5. Connecting rod.

When ordering flange-mounted disconnect equipment be sure to

include all necessary components.

1. Enclosure includes the following equipment:

Enclosure door locking handle and rods

Door interlocking system

Interlocking connecting rod

Adjustable bracket, (see note 3)

2. Operator adapter plate, gasket and hardware for the type of

disconnect device being used MUST be ordered separately

(see page 451)

3. 24 inch deep enclosures include an adjustable bracket for

mounting some disconnects:

Cutler-Hammer† C361 device

Cutler-Hammer† C371 E and F devices unless long connecting

rod C371CS1 is specified

Cutlet-Hammer† C371 G and K devices unless long connecting

rod C371CS2 is specified

General Electric† TDA device unless extended length rod

TDSR is specified.

Square D† 9422 device unless extra long connecting rod

9422-R2 is specified.

4. Disconnects and related components are available from the

manufacturer.

5. The disconnect ordering information provided is derived from

information supplied be the manufacturer of the equipment

to be installed. Fit and function of all equipment should be

checked before and after installation to assure proper and

safe operation and compliance with the applicable

regulations, codes and standards.

Important Note

Notes: Data subject to change without notice.

† Marks are the property of their respective owners.

339 B-Line series electrical enclosures Eaton

Disconnect Enclosures

Disconnect Encl.

340 Eaton B-Line series electrical enclosures

Disconnect Enclosures

Operator Enclosures

Operator Enclosures

Pushbutton Enclosures Type 12 and Type 4X - 22.5 mm & 30.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342-343

Pushbutton Enclosures Type 12 and Type 4X Extra-Deep - 30.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . 344-345

Pushbutton Enclosures Type 12 Miniature - 22.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346-347

Pushbutton Enclosures Type 12 Hinge Cover - 30.5 mm with Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348-349

Pushbutton Enclosures Type 12 Angle Front - 30.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350-351

Pushbutton Enclosures Hole & Cutout Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352

Consolet Type 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353-355

Console Type 12 - AW-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356-357

Console Type 12 - AW-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358-360

Console Type 12 - AW-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361-365

Console Accessories Type 12 - AW-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366-367

Console Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368-369

341 B-Line series electrical enclosures Eaton

Pushbutton Enclosures

Type 12 & Type 4X - 22.5 mm & 30.5 mm

Data and Illustration Sheet

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

• Stainless steel enclosure cover and sides of body have a

smooth brushed finish

Accessories

• Hole seals

• Columns and bases

• Touch-up paint

• See accessories section

Construction

• Enclosure and cover are fabricated from (14) or (16) gauge steel,

Type 304 or Type 316L stainless steel

• All continuous welded seams are finished smooth

• Cover is attached with captive screws which thread into sealed

well nuts (stainless enclosures use stainless sealed well nuts)

• Cover has concealed, detachable hinges which allow for quick

removal and can be hinged on either side (not offered on all

sizes)

• Cover has a fixed, oil-resistant gasket

• Weldnut in body of enclosure for grounding

• Cover is pre-punched with standard 30.5 mm or miniature

22.5 mm “4-way” pushbutton holes

• External mounting feet are provided for secure wall mounting

Discount Schedule: C2

Subclass: DP0

Application

• Designed to mount standard 30.5 mm or miniature

22.5 mm oil-tight pushbuttons, pilot lights and switches

• Protects against circulating dust, falling dirt and

dripping non-corrosive liquids

Standards

• UL 508A listed, Type 12, Type 13, and Type 4X

• CSA C22.2 No.94 certified, Type 12, Type 13, and

Type 4X

• Conforms to NEMA standard for Type 12, Type 13,

and Type 4X

.672

(17)

(TYP)

1.203 D

(30.5)

.190 (TYP)

(5)

Standard 4-Way

.484

(12)

(TYP) .886 D

(22.5)

.125 (TYP)

(3)

Miniature 4-Way

Operator Enclosures

Operator Enclosures

PBxx Series PVxSS Series

Notes: We can provide special sizes, finishes and other holes and cutouts, see page 352. Consult the factory for your special requirements.

342 Eaton B-Line series electrical enclosures

Pushbutton Enclosures

Type 12 & Type 4X - 22.5 mm & 30.5 mm

Illustration Sheet and Catalog Number

* Enclosures are not hinged.

† PB1 and PB2 enclosures are fabricated from (16) gauge steel or stainless steel

detachable hinge

C

Section X-X

Front View

B

B-.88

(22)

A-.50

(13)

B-.50

(13)

X

X

2.25

(57)

(TYP)

2.25

(57)

(TYP)

D

E mounting

feet

∅ .218 x .281

(6 x 7)

A

A+.50

(13)

PB1

PB3

PB2

PB4

PB6 PB9

PB12 PB16

PB20 PB25

Cover Hole

Layout

Enclosure Catalog Number Enclosure Size

(30.5 mm Hole) (22.5 mm Hole) Holes Height x Width x Depth D E

Type 304 Type 316L Type 304 A x B x C

Steel Stainless Stainless Steel Stainless in. mm in. mm in. mm

PB1*† PB1SS*† PB1SS6*† PB1M*† PB1MSS*† 1 4.00 x 3.25 x 3.00 102 x 83 x 76 2.12 54 1.75 44

PB2*† PB2SS*† PB2SS6*† PB2M*† PB2MSS*† 2 5.75 x 3.25 x 3.00 146 x 83 x 76 2.12 54 1.75 44

PB3 - --- 3 7.25 x 6.25 x 3.00 184 x 159 x 76 2.62 67 2.12 54

PB4 - --- 4 7.25 x 6.25 x 3.00 184 x 159 x 76 2.62 67 2.12 54

PB6 PB6SS* PB6SS6* - - 6 9.50 x 6.25 x 3.00 241 x 159 x 76 2.62 67 2.12 54

PB9 PB9SS* PB9SS6* - - 9 9.50 x 8.50 x 3.00 241 x 216 x 76 2.62 67 2.12 54

PB12 PB12SS* PB12SS6* - - 12 11.75 x 8.50 x 3.00 298 x 216 x 76 2.62 67 2.12 54

PB16 - --- 16 11.75 x 10.75 x 3.00 298 x 273 x 76 2.62 67 2.12 54

PB20 - --- 20 14.00 x 10.75 x 3.00 356 x 273 x 76 2.62 67 2.12 54

PB25 - --- 25 14.00 x 13.00 x 3.00 356 x 330 x 76 2.62 67 2.12 54

PV3* PV3SS* PV3SS6* PV3M* PV3MSS* 3 8.00 x 3.25 x 2.75 203 x 83 x 70 2.12 54 1.75 44

PV4* PV4SS* PV4SS6* PV4M* PV4MSS* 4 10.25 x 3.25 x 2.75 260 x 83 x 70 1.87 47 1.75 44

PV5* - --- 5 12.50 x 3.25 x 2.75 318 x 83 x 70 1.87 47 1.75 44

PV6* - --- 6 14.75 x 3.25 x 2.75 375 x 83 x 70 1.87 47 1.75 44

PV8* - --- 8 20.25 x 3.25 x 2.75 514 x 83 x 70 1.87 47 1.75 44

PV10* - --- 10 24.75 x 3.25 x 2.75 629 x 83 x 70 1.87 47 1.75 44

PV3 PV4

PV5 PV6

PV8 PV10 D

1.75

(44)

3.25

(83)

2.25

(57)

(TYP)

PV Series

Typical 8 & 10

Hole

A-1.50

(38)

B-.50

(13)

Operator Enclosures

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

343 B-Line series electrical enclosures Eaton

Pushbutton Enclosures

Type 12 & Type 4X Extra-Deep - 30.5 mm

Data and Illustration Sheet

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

• Stainless steel enclosure cover and sides of body have a smooth

brushed finish

Accessories

• Hole seals

• Columns and bases

• Touch-up paint

• See accessories section

Construction

• Enclosure and cover are fabricated from (14) or (16) gauge steel or

Type 304 stainless steel

• Enclosure has extra depth for those components that

require more room

• All continuous welded seams are finished smooth

• Cover is attached with captive screws which thread into sealed

well nuts (stainless enclosures use stainless sealed well nuts)

• Cover has concealed, detachable hinges which allow for quick

removal and can be hinged on either side (PBX Series only)

• Cover has a fixed, oil-resistant gasket

• Weldnut in body of enclosure for grounding

• Cover is prepunched with standard 30.5 mm “4-way” pushbutton

holes

• External mounting feet are provided for secure wall mounting

Discount Schedule: C2

Subclass: DP0

Application

• Designed to mount standard 30.5 mm oil-tight

pushbuttons, pilot lights and switches

• Protects against circulating dust, falling dirt and

dripping non-corrosive liquids

Standards

• UL 508A listed, Type 12, Type 13, and Type 4X

• CSA C22.2 No.94 certified, Type 12, Type 13, and

Type 4X

• Conforms to NEMA standard for Type 12, Type 13,

and Type 4X

.672

(17)

(TYP)

1.203 D

(30.5)

.190 (TYP)

(5)

Standard 4-Way

Operator Enclosures

Operator Enclosures

Notes: We can provide special sizes, finishes and other holes and cutouts, see page 352. Consult the factory for your special requirements.

344 Eaton B-Line series electrical enclosures

Pushbutton Enclosures

Type 12 & Type 4X Extra-Deep - 30.5 mm

Illustration Sheet and Catalog Number

PBX4

PBX9

PBX6

PBX10

PBX12 PBX16

PBX20 PBX25

PBX30

PBX36

B

B-.88

(22)

X

X

2.25

(57)

(TYP)

2.25

(57)

(TYP)

D

E mounting feet

A A+.50

(13)

detachable hinge

C

Section X-X

Cover Hole

Layout

Enclosure Enclosure Size

Catalog Number Holes Height x Width x Depth

Type 304 A x B x C D E

Steel Stainless in. mm in. mm in. mm

PVX1*† PVX1SS*† 1 4.00 x 4.00 x 4.75 102 x 102 x 121 2.12 54 1.75 44

PVX2*† PVX2SS*† 2 6.00 x 4.00 x 4.75 152 x 102 x 121 2.12 54 1.75 44

PVX3* PVX3SS* 3 8.00 x 4.00 x 4.75 203 x 102 x 121 2.12 54 1.75 44

PVX4* PVX4SS* 4 10.00 x 4.00 x 4.75 254 x 102 x 121 1.87 47 1.75 44

PBX4 - 4 7.25 x 6.25 x 4.75 184 x 159 x 121 2.62 67 2.12 54

PBX6 - 6 9.50 x 6.25 x 4.75 241 x 159 x 121 2.62 67 2.12 54

PBX9 - 9 9.50 x 8.50x x 4.75 241 x 216 x 121 2.62 67 2.12 54

PBX10 - 10 14.00 x 6.25 x 4.75 356 x 159 x 121 2.62 67 2.12 54

PBX12 - 12 11.75 x 8.50 x 4.75 298 x 216 x 121 2.62 67 2.12 54

PBX16 - 16 11.75 x 10.75 x 4.75 298 x 273 x 121 2.62 67 2.12 54

PBX20 - 20 14.00 x 10.75 x 4.75 356 x 273 x 121 2.62 67 2.12 54

PBX25 - 25 14.00 x 13.00 x 4.75 356 x 330 x 121 2.62 67 2.12 54

PBX30 - 30 16.25 x 13.00 x 4.75 413 x 330 x 121 2.62 67 2.12 54

PBX36 - 36 16.25 x 15.25 x 4.75 413 x 387 x 121 2.62 67 2.12 54

* Enclosures are not hinged.

† PVX1 and PVX2 enclosures are fabricated from (16) gauge steel or stainless steel.

PVX1 PVX2

PVX3 PVX4

A-.50

(13)

B-.50

(13)

∅ .218 x .281

(6 x 7)

Operator Enclosures

Front View

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

345 B-Line series electrical enclosures Eaton

Pushbutton Enclosures

Type 12 Miniature - 22.5 mm

Data and Illustration Sheet

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Hole seals

• Columns and bases

• Touch-up paint

• See accessories section

Construction

• Enclosure and cover are fabricated from (14) or (16) gauge steel

• All continuous welded seams are finished smooth

• Cover is attached with captive screws which thread into

sealed well nuts

• Covers more than 2.75 inches wide have concealed,

detachable hinges which allow for quick removal and can

be hinged on either side

• Cover has a fixed oil-resistant gasket

• Weldnut in body of enclosure for grounding

• Cover is pre-punched with miniature 22.5 mm “4-way”

pushbutton holes

• External mounting feet are provided for secure wall mounting

Discount Schedule: C2

Subclass: DP0

Application

• Designed to mount miniature 22.5 mm oil-tight

pushbuttons, pilot lights and switches

• Protects against circulating dust, falling dirt and

dripping non-corrosive liquids

Standards

• UL 508A listed, Type 12 and Type 13

• CSA C22.2 No.94 certified, Type 12 and Type 13

• Conforms to NEMA standard for Type 12 and Type 13

.484

(12)

(TYP) .886 D

(22.5)

.125 (TYP)

(3)

Miniature 4-Way

Operator Enclosures

Operator Enclosures

Notes: We can provide special sizes, finishes and other holes and cutouts, see page 352. Consult the factory for your special requirements.

346 Eaton B-Line series electrical enclosures

Pushbutton Enclosures

Type 12 Miniature - 22.5 mm

Illustration Sheet and Catalog Number

* Enclosures are not hinged.

† PB1B and PB2B enclosures are fabricated from (16) gauge steel

B

B-.88

(22)

X

X

1.87

(47)

(TYP)

1.50

(38)

(TYP)

D

E mounting feet

A

A+.50

(13)

detachable hinge

C

PB1B

PBS3B

PB2B

PBS4B

PB4B PB6B

PB9B PB12B

PB16B

PB20B

PB25B

PB30B

Section X-X

Cover Hole

Layout

Enclosure Enclosure Size

Catalog Number Holes Height x Width x Depth

A x B x C D E

in. mm in. mm in. mm

PB1B*† 1 3.25 x 2.75 x 3.50 83 x 70 x 89 1.75 44 1.50 38

PB2B*† 2 5.12 x 2.75 x 3.50 130 x 70 x 89 1.75 44 1.50 38

PBS3B* 3 7.00 x 2.75 x 3.50 178 x 70 x 89 1.75 44 1.50 38

PBS4B* 4 8.87 x 2.75 x 3.50 225 x 70 x 89 1.75 44 1.50 38

PB4B 4 6.62 x 5.00 x 3.50 168 x 127 x 89 2.50 64 1.87 47

PB6B 6 8.50 x 5.00 x 4.25 216 x 127 x 108 2.50 64 1.87 47

PB9B 9 8.50 x 6.50 x 4.25 216 x 165 x 108 2.50 64 1.87 47

PB12B 12 10.37 x 6.50 x 4.25 263 x 165 x 108 2.50 64 1.87 47

PB16B 16 10.37 x 8.00 x 4.25 263 x 203 x 108 2.50 64 1.87 47

PB20B 20 12.25 x 8.00 x 4.25 311 x 203 x 108 2.50 64 1.87 47

PB25B 25 12.25 x 9.50 x 4.25 311 x 241 x 108 2.50 64 1.87 47

PB30B 30 14.12 x 9.50 x 4.25 359 x 241 x 108 2.50 64 1.87 47

A-.50

(13)

B-.50

(13)

∅ .218 x .281

(6 x 7)

Operator Enclosures

Front View

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

347 B-Line series electrical enclosures Eaton

Pushbutton Enclosures

Type 12 Hinge Cover - 30.5 mm With Panel

Data and Illustration Sheet

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

• Panels have white enamel finish

Accessories

• Hole seals

• Columns and bases

• Touch-up paint

• See accessories section

Construction

• Enclosure and cover are fabricated from (14) gauge steel

• All continuous welded seams are finished smooth

• Cover is secured to the body with a continuous hinge on one

side and captive screws which thread into sealed well nuts on

the opposite side

• Cover has a fixed oil-resistant gasket

• Weldnut in body of enclosure for grounding

• Cover is pre-punched with standard 30.5 mm “4-way”

pushbutton holes

• Heavy gauge panel mounted to weldnuts is provided with

enclosure

• External mounting feet are provided for secure wall mounting

Discount Schedule: C2

Subclass: DP0

Application

• Designed to mount standard 30.5 mm oil-tight

pushbuttons, pilot lights and switches

• Protects against circulating dust, falling dirt and

dripping non-corrosive liquid

Standards

• UL 508A listed, Type 12 and Type 13

• CSA C22.2 No.94 certified, Type 12 and Type 13

• Conforms to NEMA standard for Type 12 and Type 13

.672

(17)

(TYP)

1.203 D

(30.5)

.190 (TYP)

(5)

Standard 4-Way

Operator Enclosures

Operator Enclosures

Notes: We can provide special sizes, finishes and other holes and cutouts, see page 352. Consult the factory for your special requirements.

348 Eaton B-Line series electrical enclosures

Pushbutton Enclosures

Type 12 Hinge Cover - 30.5 mm With Panel

Illustration Sheet and Catalog Number

B

B-.88

(22)

X X

2.50

(64)

(TYP)

3.12

(79)

2.62

(67)

.50

(13)

5.875

(149)

2.50

(64)

(TYP)

mounting feet

A

A+.50

(13)

continuous hinge

removable panel

C

PBP4 PBP6 PBP9

PBP12 PBP16

PBP20 PBP25

PBP30

PBP36

PBP42

Section X-X

Cover Hole

Layout

Enclosure Enclosure Size Panel Size

Catalog Number Holes Height x Width x Depth

A x B x C Height x Width

in. mm in. mm in. mm

PBP4 4 8.50 x 7.50 x 6.00 216 x 191 x 152 6.50 35 5.50 140

PBP6 6 11.00 x 7.50 x 6.00 279 x 191 x 152 9.00 229 5.50 140

PBP9 9 11.00 x 10.00 x 6.00 279 x 254 x 152 9.00 229 8.00 203

PBP12 12 13.50 x 10.00 x 6.00 343 x 254 x 152 11.50 292 8.00 203

PBP16 16 13.50 x 12.50 x 6.00 343 x 318 x 152 11.50 292 10.50 267

PBP20 20 16.00 x 12.50 x 6.00 406 x 318 x 152 14.00 356 10.50 267

PBP25 25 16.00 x 15.00 x 6.00 406 x 381 x 152 14.00 356 13.00 330

PBP30 30 18.50 x 15.00 x 6.00 470 x 381 x 152 16.50 419 13.00 330

PBP36 36 18.50 x 17.50 x 6.00 470 x 445 x 152 16.50 419 15.50 394

PBP42 42 21.00 x 17.50 x 6.00 533 x 445 x 152 19.00 483 15.50 394

A-1.50

(38)

B-.50

(13)

∅ .218 x .281

(6 x 7)

Operator Enclosures

Front View

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

349 B-Line series electrical enclosures Eaton

Pushbutton Enclosures

Type 12 Angle Front - 30.5 mm

Data and Illustration Sheet

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Hole seals

• Columns and bases

• Touch-up paint

• See accessories section

Construction

• Enclosure and cover are fabricated from (14) or (16) gauge steel

• All continuous welded seams are finished smooth

• Cover is attached with captive screws which thread into sealed

well nuts

• Covers more than 3.25 inches high have concealed, detachable

hinges which allow for quick removal and can be hinged on

either side

• Cover has a fixed oil-resistant gasket

• Weld nut in body of enclosure for grounding

• Cover is pre-punched with standard 30.5 mm “4-way”

pushbutton holes

• External mounting feet are provided for secure wall mounting

Discount Schedule: C2

Subclass: DP0

Application

• Designed to mount standard 30.5 mm oil-tight

pushbuttons, pilot lights and switches

• Designed with angle front for mounting in either

30° or 60° positions

• Protects against circulating dust, falling dirt and

dripping non-corrosive liquid

Standards

• UL 508A listed, Type 12 and Type 13

• CSA C22.2 No.94 certified, Type 12 and Type 13

• Conforms to NEMA standard for Type 12 and Type 13

.672

(17)

(TYP)

1.203 D

(30.5)

.190 (TYP)

(5)

Standard 4-Way

Operator Enclosures

Operator Enclosures

Notes: We can provide special sizes, finishes and other holes and cutouts, see page 352. Consult the factory for your special requirements.

350 Eaton B-Line series electrical enclosures

Pushbutton Enclosures

Type 12 Angle Front - 30.5 mm

Illustration Sheet and Catalog Number

B C

E

F

D D+.50

(13)

B-.88

(22)

X

X

2.50

2.25 (64)

(57)

(TYP)

2.25

(57)

(TYP)

mounting feet

.218 x .281

(6 x 7)

A

detachable

hinge

PBC2 PBCS3

PBC3 PBCS4

PBC4 PBC6

PBC8 PBC9

PBCS12

PBC12

PBC16

PBC20

PBC25

Side Section View

Front Cover View

Section X-X

Cover Hole

Layout

Enclosure Enclosure Size

Catalog Number Holes Height x Width x Depth

A x B x C DEF

in. mm in. mm in. mm in. mm

PBC2*† 2 3.25 x 6.25 x 4.81 83 x 159 x 122 3.31 84 1.75 44 2.12 54

PBCS3* 3 3.25 x 8.50 x 4.81 83 x 216 x 122 3.31 84 1.75 44 2.12 54

PBC3 3 6.25 x 7.25 x 6.37 159 x 184 x 162 5.90 150 2.12 54 2.62 67

PBCS4* 4 3.25 x 10.25 x 4.81 83 x 260 x 122 3.31 84 1.75 44 1.87 47

PBC4 4 6.25 x 7.25 x 6.37 159 x 184 x 162 5.90 150 2.12 54 2.62 67

PBC6 6 6.25 x 9.50 x 6.37 159 x 241 x 162 5.90 150 2.12 54 2.62 67

PBC8 8 6.25 x 11.75 x 6.37 159 x 298 x 162 5.90 150 2.12 54 2.62 67

PBC9 9 9.50 x 8.50 x 7.88 241 x 216 x 200 8.84 225 2.12 54 2.62 67

PBCS12 12 6.25 x 16.25 x 6.37 159 x 413 x 162 5.90 150 2.12 54 2.62 67

PBC12 12 8.50 x 11.75 x 7.50 216 x 298 x 191 7.84 199 2.12 54 2.62 67

PBC16 16 10.75 x 11.75 x 8.62 273 x 298 x 219 9.78 248 2.12 54 2.62 67

PBC20 20 10.75 x 14.00 x 8.62 273 x 356 x 219 9.78 248 2.12 54 2.62 67

PBC25 25 13.00 x 14.00 x 9.75 330 x 356 x 248 11.75 298 2.12 54 2.62 67

* Enclosures are not hinged.

† PBC2 enclosures are fabricated from (16) gauge steel

A-1.50

(38)

B-.50

(13)

∅ .25 x .375

(6 x 10)

Operator Enclosures

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

351 B-Line series electrical enclosures Eaton

Pushbutton Enclosures Hole and Cutout Information

Illustration Sheet

Standard 4-Way (Type S4-WAY)

Our standard 4-way pushbutton hole will accommodate

all standard size pushbutton, pilot lights and selector

switches. The hole is designed to orient the device and

legend plate in one of four different positions.

Furnished on “PB”, “PBX”, “PBP”, “PBC”, “PBCS”,

“PV”, “PVX”, “PVS” and “P” style enclosures.

Miniature 4-Way (Type: M4-WAY)

Our miniature 4-way pushbutton hole will accommodate

miniature size pushbuttons, pilot lights and selector

switches. The hole is designed to orient the device and

legend plate in one of four different positions.

Furnished on “PB-M” and “PB-B” style enclosures.

.672

(Typ)

(17)

1.203 D

(30.5)

.190 (TYP)

(5)

.672

(17)

1.210 D

(30.5)

1.210 D

(30.5)

.190

(5)

.600

(15)

1.210 D

(30.5)

.136 D

(3)

.750

(19)

2.00

(51)

2.00

(51)

60°

.484

(Typ)

(12)

.886 D

(22.5)

.125 (TYP)

(3)

Type: C-101 Type C-102

Type C-201 Type: C-103

Custom Holes and Cutouts

Operator Enclosures

Operator Enclosures

Notes: When specifying hole types “C-101”, “C-102” and “C-103” indicate orientation of “key”. Dimensions are in inches.

Millimeters shown are for reference only. Data subject to change without notice.

352 Eaton B-Line series electrical enclosures

Operator Enclosures

Consolet

Type 12

Data Sheet

Accessories

• Columns and bases

• Touch-up paint

• See Accessories section

Construction

• Enclosure and cover are fabricated from (14) gauge steel or

Type 304 stainless steel

• All continuous welded seams are finished smooth

• Cover is secured to the body with a continuous hinge on one

side and captive screws which thread into sealed well nuts on

the opposite side

• Cover has a fixed oil-resistant gasket

• Ground stud provided on cover and body

Discount Schedule: C2

Subclass: DQ0

Application

• Houses electrical controls and instruments

• Designed with angle front for mounting in either

30° or 60° position

• Protects against circulating dust, falling dirt and

dripping non-corrosive liquids

Standards

• UL 508A listed, Type 12 and Type 13

• CSA C22.2 No.94 certified, Type 12 and Type 13

• Conforms to NEMA standard for Type 12 and Type 13

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

• Stainless steel enclosure cover and sides of body

have a smooth brushed finish

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

353 B-Line series electrical enclosures Eaton

Operator Enclosures

Consolet

Type 12

Illustration Sheet and Catalog Number

Enclosure Enclosure Size

Catalog Number Height x Width x Depth

Type 304 A x B x C DE F GH J

Steel Stainless in. mm in. mm in. mm in. mm in. mm in. mm in. mm

AC-8C8 AC-8C8SS 8.00 x 8.00 x 7.12 203 x 203 x 181 5.62 143 7.50 191 6.62 168 7.37 187 8.25 210 8.25 210

AC-8C12 AC-8C12SS 8.00 x 12.00 x 7.12 203 x 305 x 181 5.62 143 7.50 191 6.62 168 11.37 289 8.25 210 12.25 311

AC-8C16 AC-8C16SS 8.00 x 16.00 x 7.12 203 x 406 x 181 5.62 143 7.50 191 6.62 168 15.37 390 8.25 210 16.25 413

AC-8C20 AC-8C20SS 8.00 x 20.00 x 7.12 203 x 508 x 181 5.62 143 7.50 191 6.62 168 19.37 492 8.25 210 20.25 514

AC-12C12 AC-12C12SS 12.00 x 12.00 x 9.12 305 x 305 x 232 7.62 194 11.00 279 10.62 270 11.37 289 12.25 311 12.25 311

AC-12C16 AC-12C16SS 12.00 x 16.00 x 9.12 305 x 406 x 232 7.62 194 11.00 279 10.62 270 15.37 390 12.25 311 16.25 413

AC-12C20 AC-12C20SS 12.00 x 20.00 x 9.12 305 x 508 x 232 7.62 194 11.00 279 10.62 270 19.37 492 12.25 311 20.25 514

AC-12C24 AC-12C24SS 12.00 x 24.00 x 9.12 305 x 610 x 232 7.62 194 11.00 279 10.62 270 23.37 594 12.25 311 24.25 616

AC-16C16 AC-16C16SS 16.00 x 16.00 x 11.12 406 x 406 x 282 9.62 244 14.50 368 14.62 371 15.37 390 16.25 413 16.25 413

AC-16C20 AC-16C20SS 16.00 x 20.00 x 11.12 406 x 508 x 282 9.62 244 14.50 368 14.62 371 19.37 492 16.25 413 20.25 514

AC-16C24 AC-16C24SS 16.00 x 24.00 x 11.12 406 x 610 x 282 9.62 244 14.50 368 14.62 371 23.37 594 16.25 413 24.25 616

AC-16C30 AC-16C30SS 16.00 x 30.00 x 11.12 406 x 762 x 282 9.62 244 14.50 368 14.62 371 29.37 746 16.25 413 30.25 768

AC-16C36 AC-16C36SS 16.00 x 36.00 x 11.12 406 x 914 x 282 9.62 244 14.50 368 14.62 371 35.37 898 16.25 413 36.25 921

AC-20C20 AC-20C20SS 20.00 x 20.00 x 13.12 508 x 508 x 333 11.62 295 18.00 457 18.62 473 18.62 473 20.25 514 20.25 514

AC-20C24 AC-20C24SS 20.00 x 24.00 x 13.12 508 x 610 x 333 11.62 295 18.00 457 18.62 473 22.62 574 20.25 514 24.25 616

AC-20C30 AC-20C30SS 20.00 x 30.00 x 13.12 508 x 762 x 333 11.62 295 18.00 457 18.62 473 28.62 727 20.25 514 30.25 768

captive screw

captive screw

continuous hinge

continuous hinge

30˚

60˚

Typical Mounting Configurations

Side Views

Operator Enclosures

Notes: We can provide special sizes, finishes and other holes and cutouts, see page 352. Consult the factory for your special requirements.

354 Eaton B-Line series electrical enclosures

Operator Enclosures

Consolet

Type 12

Illustration Sheet

H

J

F

G

B

E

A

2.50

(64)

F-1.50

(38)

G-.50

(13)

X

X

D

C

Section X-X

Front Cover View Enclosure Opening View

(cover and hinge removed)

Side Section View

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

355 B-Line series electrical enclosures Eaton

Operator Enclosures

Console

Type 12 - AW-9

Data Sheet and Catalog Number

Consoles Console Size Back Panel Panel Size Side Panel Panel Size

Height x Width x Depth Height x Width Height x Width

A x B x C D A x B A x B

Catalog Number in. mm in. mm Catalog Number in. mm Catalog Number in. mm

AC-924B 48.00 x 24.00 x 18.00 1219 x 610 x 457 15.25 387 AW3020P 26.87 x 16.87 682 x 428 AW3020P 26.87 x 16.87 682 x 428

AC-936B 48.00 x 36.00 x 18.00 1219 x 914 x 457 25.25 641 AW3030P 26.87 x 26.87 682 x 682 AW3020P 26.87 x 16.87 682 x 428

Construction

• Console, panel cover and door are fabricated from (14)

gauge steel

• All continuous welded seams are finished smooth

• Panel cover is secured to the body with a continuous

hinge along the front side and captive screws which thread

into sealed well nuts on the other three sides

• Cover stops allow the panel cover to be held in the

open position

• Front access door is secured to the body with a heavy-duty

continuous hinge on one side and a 3-point locking handle

which latches to the opposite side

• Print pocket provided

• Panel cover and front door have a fixed oil-resistant gasket

• .375-16 collar studs are provided on back and both side walls

for mounting optional panel

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Accessories

• Panels

• NEMA treminal strap kit

• Terminal blocks

• Caster kit

• Touch-up paint

• Replacement handle, 25228C, see page 426

• See Accessories section

Discount Schedule: C2

Subclass: DR0

Application

• Houses electrical controls and instruments

• Designed with 45° angle top surface for

pushbuttons, pilot lights, switches, or other

monitoring devices

• Protects against circulating dust, falling dirt and

dripping non-corrosive liquids

Standards

• UL 508A listed, Type 12

• CSA C22.2 No.94 certified, Type 12

• Conforms to NEMA standard for Type 12

Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

Operator Enclosures

356 Eaton B-Line series electrical enclosures

Operator Enclosures

Console

Type 12 - AW-9

Illustration Sheet

B

A

32.00

(813)

2.00

(51)

25.25

(641)

25.25

(641)

15.25

(387)

C

B-2.75

(70)

19.87

(505)

D

Front View

Front Section View Panel Cover Opening

(Panel Cover Removed)

Side View

.375-16

collar stud

rotation

captive screw

continuous hinge

3-point

handle lock

panel cover

print pocket

(supplied)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

357 B-Line series electrical enclosures Eaton

Operator Enclosures

Console

Type 12 - AW-12

Data Sheet and Catalog Number

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

• Optional top assembly and writing desk have an ANSI 61

gray polyester powder finish

• Panels have a white enamel finish

Accessories

• Terminal blocks

• Caster kit

• Touch-up paint

• See Accessories section

• Replacement handle, 25228C, see page 426

Construction

• Console body, panel cover and door, top assembly and

writing desk are fabricated from (14) gauge steel

• All continuous welded seams are finished smooth

• Panel cover is secured to the body with a continuous

hinge along the front side and captive screws which thread

into sealed well nuts on the other three sides

• Cover stops allow the panel cover to be held in the

open position

• Consoles 36 inches wide or less have a single front access

door with a heavy-duty continuous hinge on one side and

3-pt locking handle on the opposite side

• Consoles wider than 36 inches have double front access

doors with heavy-duty continuous hinge and center locating

3-point locking handle which closes right side door over left

• Print pocket provided

• Panel cover, front door and top assembly covers have a

fixed oil-resistant gasket

• Removable panel mounted on .375-16 collar studs is

located behind the console body door

• Optional top assembly has a front-mounted instrument

panel cover and rear-mounted access panel cover

• Optional writing desk is available for convenient

front mounting

Discount Schedule: C2

Subclass: DR0

Console Body Console Body Size Panel Size Top Assembly Writing Desk

Height x Width x Depth Optional Optional

A x B x C Height x Width

Catalog Number in. mm in. mm Catalog Number Catalog Number

AC-1224B 36.00 x 24.00 x 24.00 914 x 610 x 610 26.87 x 16.87 682 x 428 AC-1224T AC-1224W*

AC-1236B 36.00 x 36.00 x 24.00 914 x 914 x 610 26.87 x 26.87 682 x 682 AC-1236T AC-1236W*

AC-1248B 36.00 x 48.00 x 24.00 914 x 1219 x 610 26.87 x 38.87 682 x 987 AC-1248T AC-1248W*

Application

• Houses electrical controls and instruments

• Designed with an angled top and front surface for

pushbuttons, pilot lights, switches or other

monitoring devices

• Protects against circulating dust, falling dirt and

dripping non-corrosive liquids

Standards

• UL 508A listed, Type 12

• CSA C22.2 No.94 certified, Type 12

• Conforms to NEMA standard for Type 12

Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.

* Not UL or CSA listed

Operator Enclosures

358 Eaton B-Line series electrical enclosures

Operator Enclosures

Console

Type 12 - AW-12

Illustration Sheet

B

panel cover

panel cover

captive screw

captive screw

continuous hinge

continuous hinge

print pocket

(supplied)

print pocket

(supplied)

body stiffener

body stiffener

rotation

rotation

terminal block

channel

terminal block

channel

panel

panel

3-point

handle lock

3-point

handle lock

A

32.00

(813)

C

10.00

(254)

10.00

(254)

20.00

(508)

20.00

(508)

B

C

A

32.00

(813)

Console Body Front View

(24 inch & 36 inch wide body)

Console Body Front View

(48 inch wide body)

Side View

Side View

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

359 B-Line series electrical enclosures Eaton

Operator Enclosures

Console

Type 12 - AW-12

Illustration Sheet

B

B

20.00

(508)

6.00

(152)

10.00

(254)

10.00

(254)

B-2.75

(70) 11.25

(286)

captive screw access cover

instrument

panel cover

top assembly

console body

writing desk

Top Assembly

Front View

Typical Assembly

Side View

Writing Desk Side View

Front View

(*not UL or CSA listed)

Panel Cover Opening

(panel cover removed)

Operator Enclosures

360 Eaton B-Line series electrical enclosures

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

Console

Type 12 - AW-14

Data Sheet

Construction

• Console body, panel cover and door, top assembly and

writing desk are fabricated from (14) gauge steel

• All continuous welded seams are finished smooth

• Panel cover is secured to the body with a continuous hinge

along the front side and captive screws which thread into

sealed well nuts on the other three sides

• Cover stops allow the panel cover to be held in the

open position

• Consoles 36 inches wide or less have a single front and

rear access door with a heavy-duty continuous hinge on

one side and a 3-point locking handle on the opposite side

• Consoles wider than 36 inches have double front and rear

access doors with a heavy-duty continuous hinge and a

center locating 3-point locking handle which closes right

side door over left

• Mounting channels are welded inside for locating optional

panel along console depth

• Front door has a print pocket

• Panel cover, front door and top assembly covers have

fixed oil-resistant gaskets

• Optional top assembly has front mounted instrument

panel cover(s) and rear mounted access panel cover(s)

• An optional writing desk is available with convenient

front mounting

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

• Optional top assembly and writing desk have an

ANSI 61 gray polyester powder finish

Accessories

• NEMA terminal strap kit

• Terminal blocks

• Swing panels

• Full and half panels

• Channel mounting hardware

• Caster kit

• Touch-up paint

• Replacement handle, 25228C, see page 426

• See Accessories section

Discount Schedule: C2

Subclass: DR0

Application

• Houses electrical controls and instruments

• Designed with a 60° angle top surface for pushbuttons,

pilot lights, switches or other monitoring devices

• Protects against circulating dust, falling dirt and

dripping non-corrosive liquids

Standards

• UL 508A listed, Type 12

• CSA C22.2 No.94 certified, Type 12

• Conforms to NEMA standard for Type 12

Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements

Operator Enclosures

361 B-Line series electrical enclosures Eaton

Operator Enclosures

Console

Type 12 - AW-14

Illustration Sheet and

Catalog Number

B

panel cover

captive screw

mounting

channel

continuous hinge

print pocket

(supplied)

rotation

rotation

2.75

(70)

18.00

(457)

3-point

handle

lock

A

32.00

(813)

12.50

(318)

19.25

(489)

19.25

(489)

6.75

(171)

2.75

(70)

B-1.62

(41)

B-2.75

(70) B-2.75

(70)

3.37

(86)

C

A-4.75

(121)

Console Body

Front View

(24 inch & 36 inch wide body)

Console Body

Rear View

Panel Cover Opening

(panel cover removed)

Side View

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Console Body Console Body Size Top Assembly Writing Desk

Height x Width x Depth Optional Optional

A x B x C

Catalog Number in. mm Catalog Number Catalog Number

AC-1424B 50.00 x 24.00 x 23.00 1270 x 610 x 584 AC-1424T AC-1424W*

AC-1436B 50.00 x 36.00 x 23.00 1270 x 914 x 584 AC-1436T AC-1436W*

AC-1448B 50.00 x 48.00 x 23.00 1270 x 1219 x 584 AC-1448T AC-1448W*

AC-1460B 50.00 x 60.00x 23.00 1270 x 1524 x 584 AC-1460T AC-1460W*

AC-1472B 50.00 x 72.00 x 23.00 1270 x 1829 x 584 AC-1472T AC-1472W*

* Not UL or CSA listed

Operator Enclosures

362 Eaton B-Line series electrical enclosures

Operator Enclosures

Console

Type 12 - AW-14

Illustration Sheet

Console Body

Rear View

Panel Cover Opening

(panel cover removed)

B

panel cover

captive

screw

mounting

channel

continuous hinge

print pocket

(supplied)

rotation

rotation

3-point

handle lock

A

C Console Body

Front View

(48 inch wide body) Side View

2.75

(70)

2.75

(70)

12.50

(318)

19.25

(489)

19.25

(489)

6.75

(171)

32.00

(813)

18.00

(457)

B-2.75

(70)

B-2.75

(70)

A-4.75

(121)

B-1.62

(41)

3.37

(86)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

363 B-Line series electrical enclosures Eaton

Operator Enclosures

Console

Type 12 - AW-14

Illustration Sheet

Console Body Rear View

Panel Cover Opening

(panel cover removed)

B

panel cover

captive

screw

mounting

channel

continuous hinge

print pocket

(supplied)

rotation

rotation

3-point

handle lock

A

C

B/2-2.75

(70)

B/2-2.75

(70)

Console Body Front View

(60 inch & 70 inch wide body)

Side View

2.75

(70)

2.75

(70)

12.50

(318)

19.25

(489)

19.25

(489)

6.75

(171)

32.00

(813)

18.00

(457)

B-2.75

(70)

A-4.75

(121)

B-1.62

(41)

3.37

(86)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

364 Eaton B-Line series electrical enclosures

Operator Enclosures

Console

Type 12 - AW-14

Illustration Sheet

B

16.00

(406)

access

cover

B

B

B 10.00

(254)

instrument

panel cover

captive

screw

12.50

(318)

Top Assy Front View

(24 inch (610 mm) & 36 inch

(914 mm) wide body)

Top Assy Front View

(48 inch (1219 mm) wide body)

Top Assy Front View

(60 inch (1524 mm) & 72 inch (1829

mm) wide body)

Writing Desk Front View

(* not UL or CSA listed)

Side View

(typical all top assy)

Side View

Top Assy Rear View

(24 inch (610 mm) & 36 inch

(914 mm) wide body)

Top Assy Rear View

(48 inch (1219 mm) wide body)

Top Assy Rear View

(60 inch (1524 mm) & 72 inch

(1829 mm) wide body)

16.00

(406)

16.00

(406)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

365 B-Line series electrical enclosures Eaton

Operator Enclosures

Console Accessories

Type 12 - AW-14 Discount Schedule: C2

Full and Half Panel Subclass: DR0

Illustration Sheet and Catalog Number

Full panel and half panel for consoles are (12) gauge steel and furnished with panel brackets and all hardware necessary for

channel and panel mounting. Half panels can be mounted in either the upper or lower portion of the console. Console body

design permits the panel to adjust along the depth of the enclosure. Full panel and half panel can be mounted back-to-back.

B

B

B-1.62

(41)

B-1.62

(41)

38.50

(978)

A

A

A

Full Panel Mounting

Full Panel

Half Panel

(upper mount)

Half Panel

(lower mount)

Half Panel Mounting

panel

side bracket

(see detail

sheet page

368)

Half Panel

Panel Panel Size Fits

Height x Width Console Body

A x B

Catalog Number in. mm Catalog Number

AC-1424HP 20.87 x 19.87 530 x 505 AC-1424B

AC-1436HP 20.87 x 31.87 530 x 809 AC-1436B

AC-1448HP 20.87 x 43.87 530 x 1114 AC-1448B

AC-1460HP 20.87 x 55.87 530 x 1419 AC-1460B

19.25

(489)

19.25

(489)

19.25

(489)

19.25

(489)

Full Panel

Panel Panel Size Fits

Height x Width Console Body

A x B

Catalog Number in. mm Catalog Number

AC-1424P 40.12 x 19.87 1019 x 505 AC-1424B

AC-1436P 40.12 x 31.87 1019 x 809 AC-1436B

AC-1448P 40.12 x 43.87 1019 x 1114 AC-1448B

AC-1460P 40.12 x 55.87 1019 x 1419 AC-1460B

AC-1472P 40.12 x 67.87 1019 x 1724 AC-1472B

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

366 Eaton B-Line series electrical enclosures

Operator Enclosures

Console Accessories

Type 12 - AW-14 Discount Schedule: C2

Swing Panel and Terminal Strap Kit Subclass: DR0

Illustration Sheet and Catalog Number

Swing Panel

Panel Panel Size Fits Console Body

Height x Width

A x B

Catalog Number in. mm Catalog Number

AC-1424SWP 40.12 x 18.75 1019 x 476 AC-1424B

AC-1436SWP 40.12 x 30.75 1019 x 781 AC-1436B

Terminal Strap Kit

Panel Quantity Fits Console Body

Catalog Number of Straps Catalog Number

24TS20 4 All AW-14 Series

24TS24 5 All AW-14 Series

Swing Panel Mounting

Swing Panel for Consoles are (12) gauge

steel, have a dual hinge swing panel bracket

and are furnished with panel brackets and all

hardware necessary for channel and panel

mounting. Panels can be installed such that

they hinge either on the left side or right side.

Console body design permits the panel to

adjust along the depth of the enclosure.

The dual hinge allows the inner panel to

swing completely out of the rear opening

when within 5.50 inches. Panel and swing

panel can be mounted back-to-back.

B 2.06

(52)

3.18

(81)

A

Swing Panel Mounting

Swing Panel

Terminal Strap Kit

Terminal Strap Mounting

panel

side bracket

(see detail

sheet page

368)

swing panel

bracket assembly

(see detail sheet)

hinge

Terminal Strap Mounting

Terminal Strap Kits assemble conveniently to

the channel on either side of the console

body. Channel mounting hardware should

be purchased separately for installation. Full

length straps are furnished with adequate

space for the users’ terminal blocks or

terminal blocks and extra straps can be

purchased separately (see detail sheet and

the Accessories section).

19.25

(489)

19.25

(489)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

367 B-Line series electrical enclosures Eaton

Operator Enclosures

Console Accessories Discount Schedule: C2

Type 12 - AW-14 Subclass: DR0

Illustration Sheet and Catalog Number

Catalog Number Description Fits Illustration Quantity

Console Body

AFSBRKT1 Panel mounting bracket AW-14 Series 1 1

AFCMH3 Channel mounting hardware AW-14 Series 2 3

FTB3005 #18-#8 medium-duty flat base terminal block AW-14 Series 3 1

FTE3001 Medium-duty flat base terminal block end AW-14 Series 3 1

CTB3005 #18-#8 medium-duty channel terminal block AW-12 Series 4 1

CTE3001 Medium-duty channel terminal block end AW-12 Series 4 1

FT6005 #18-#4 heavy-duty flat base terminal block AW-14 Series 3 1

FE6001 Heavy-duty flat base terminal block end AW-14 Series 3 1

CT6005 #18-#4 heavy-duty channel terminal block AW-12 Series 4 1

CE6001 Heavy-duty channel terminal block end AW-12 Series 4 1

CTC2 Channel clamp AW-12 Series 4 1

25012A Channel Strip (72 inch) AW-12 Series - 1

Individual terminal block, end, and clamps only. Heavy and

Medium-duty blocks can be stacked to any length. When

stacked, each block is approximately .43 or .56 inches long,

depending on which block is used. For detail and specific

quantity packages, refer to the Accessories section.

Individual terminal block and terminal end only. Heavy and

Medium-duty blocks can be stacked to any length. When

stocked, each block is approximately .43 or .56 inches long,

depending on which block is used. For detail and specific

quantity packages, refer to the Accessories section.

channel

spring nut

panel nut

panel mounting

stud

terminal end

Top Assembly

Writing Desk

Console

Body

terminal end

channel clamp

channel

clamp

channel terminal block

flat base

terminal block

flat base terminal

block (shown stacked)

side bracket

channel

spring nut

channel

mounting

hardware

channel

mounting

hardware

Illustration 1 Illustration 2

Illustration 3

Illustration 4

channel terminal

block (shown

stacked)

Typical Assembly

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

368 Eaton B-Line series electrical enclosures

Operator Enclosures

Console Details

Type 12 - AW-14 Discount Schedule: C2

Panel and Console Subclass: DR0

Detail Sheet

console width -5.75

(146)

console width -6.06

(154)

2.87

(73)

2.87

(73)

2.87 min

(73)

2.87 min

(73)

3.00 min

(76)

5.00 min

(127)

3.18

(81)

Console Rear Access Door

(section view showing full and half panel mounted back-to-back)

Console Rear Access Door

(section view showing swing panel and half panel mounted back-to-back)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Operator Enclosures

369 B-Line series electrical enclosures Eaton

Operator Enclosures

Operator Enclosures

370 Eaton B-Line series electrical enclosures

Air Conditioner - General Specifications, Sizing, Selection, & Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 372-374

Air Conditioners NEMA 4 or 4X Guardian (DP15, DP21, DP33, DP47, DP50) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375-379

Air Conditioners 480 Volt NEMA 4 or 4X Guardian (DP24) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 380

Air Conditioners 480 Volt NEMA 4 or 4X Guardian (DP38, DP52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 381-382

Air Conditioners NEMA 4 or 4X Slimcool Series (SP28, SP36, SP43) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383-385

Air Conditioners Top Mounted NEMA 12 Compact Series Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 386

Air Conditioners Top Mounted NEMA 12 Compact Plus Series Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387

Filter Fans - NEMA 1 Box Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388

Filter Fans NEMA 3R Advantage Sentry Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 389

Filter Fans Filter-Grille Assemblies Advantage Sentry Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390

Filter Fans NEMA 4 or 4X Guardian Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391-392

Filter Fans Filter-Hood Assemblies Guardian Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393

Filter Fans NEMA 12 Filter Fan, Grills, Replacement Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 394-398

Heater Calculation Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399

PTC Fan Heaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400

PTC Heaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401

Fan Heaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402

Small Thermostats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403

Electronic Humidity and Temperature Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403

Climate Control

Climate Control Products

371 B-Line series electrical enclosures Eaton

Enclosure Climate Control

Heat producing components currently widely used in electronic and industrial equipment enclosures present the problem of

dissipating the heat generated before damage can occur to heat-sensitive parts. In many cases, the problem can be solved by

ventilation, using simple air moving devices. However, in more and more applications the available ambient air is too warm or too

contaminated to be used for the safe dissipation of the unwanted heat. Under those conditions, the life expectancy and performance

of sensitive components may be adversely affected, often causing equipment malfunctions, slowdowns or failures.

In forced convection cooling of enclosures, cooler ambient air is drawn or forced through the components in an enclosure and

discharged. When electronic/electrical enclosures are sealed to keep out moisture, dust, dirt and other contaminants, the heat

generated by the components is trapped and closed-loop cooling (air conditioner or heat exchanger) is needed to maintain the

optimum environment for the components.

*Our product offerings include an extensive array of units for virtually every type of application which customers can select from to

address their enclosure ventilation or cooling requirement.

COOLING PRODUCT SELECTION

Our philosophy is to specify the smallest, least complex cooling device that will satisfy the requirements of the application.

Forced Ventilation Air Cooling

In clean, non-hazardous environments with acceptable ambient temperatures, a simple forced-air cooling system utilizing ambient

air is usually adequate. Combined with a low-cost air filter, such devices generally meet the heat removal needs of typical electronic

and electrical equipment.

Closed-Loop Cooling

In harsh environments involving high temperatures, heavy particulates, oil, or chemicals capable of damaging components, ambient

air must be kept out of the enclosure. Sealed enclosures are generally used, with closed-loop cooling consisting of two separate

circulation systems in a single unit. One system, sealed against the ambient air, cools and recirculates the clean cool air throughout

the enclosure. The second system uses ambient air or water to remove and discharge the heat.

General Specifications for all Air Conditioners Climate Control

372 Eaton B-Line series electrical enclosures

CLOSED-LOOP COOLING: The enclosure interior airflow system is isolated from the ambient airflow system. No ambient air can

invade the cool, dehumidified, sensitive component compartment.

BALL-BEARING MOTORS: All blower motors are UL/CSA Recognized and include automatic-reset thermal overload protection

and double-sealed or double-shielded precision ball bearings. Special permanent lubricants perform over a broad temperature range:

-20ºF (-29ºC) to 250ºF (121ºC). Tube axial fans are rated to perform at 14ºF (-10ºC) to 158ºF (70ºC) and are designed to meet UL,

CSA and VDE.

BLOWERS: All centrifugal blowers are designed and built to provide optimum airflow and pressure for each air conditioner design.

RUGGED CONSTRUCTION: Precision-engineered heavy gauge steel construction of all shells and blowers ensures air conditioners

will stand up under tough applications.*

BAKED POWDER FINISH: Durable, baked-on powder finish is standard. Other finishes are available.*

POWER: Units are available in 115 VAC, 230 VAC or 480 Volt.

REFRIGERANTS: CFC-free R134a Refrigerant is used in all air conditioners for which compatible compressors are available. All

others contain Zero Ozone Depleting Potential (ODP) R410a Refrigerant. The model number reflects the refrigerant. A 4 between

the A and C signifies R134a; a 6 signifies R410a.

FILTERS: Multi-layer grid of sturdy, corrugated aluminum in an aluminum frame. May be reused after washing off accumulations

and spraying with A-16 Recoating Adhesive. Filters must be kept free of accumulations to prevent reduction or loss of performance

and/or damage to equipment. Filters are not required on water-cooled models.

CONDENSATE DISPOSAL: Condensate drain fitting and hose are included. Built-in Condensate Evaporators are standard in many

models. (See Series sections)

POWER CORD: All models have 3-wire power cords. 480 Volt models are supplied with an external junction box for permanent wiring

as a Standard Feature. Single phase UL listed units are supplied with a plug.

INSULATION: All cold components, lines and the evaporator compartment are insulated with high-performance insulation for

maximum efficiency.

GASKETING: All units are fully gasketed for tight, leakproof installation in compliance with the NEMA 12, 3R or 4/4X Enclosure

Ratings.

QUALITY ASSURANCE: Refrigeration system components are kept sealed until charged with refrigerant; all brazed joints are

thoroughly leak-tested; each unit is functionally tested before shipment.

INSTALLATION: Installation instructions, including mounting plan drawings, are included with each unit.

* See Guardian, Guardian 480 Volt for different specifications applicable.

Guardian Series, SlimKool Series, Compact Series, Compact Plus Series, and Advantage Series are brand names of KOOLTRONIC, Inc., Pennington, NJ

Climate Control Products

Air Conditioner Sizing and Selection

Climate Control

Climate Control

373 B-Line series electrical enclosures Eaton

Cooling Electronic Control Cabinets

Most electronic control systems generate a substantial amount of heat during operation. This heat factor is intensified as

electronic controls are made more compact, perform more functions and are placed in confined areas. Additional problems are

encountered when the electronic process control system is located on-line in an industrial setting, rather than in a clean computer

room. The factory environment can be hostile to the point that performance and effective life of the electronic components are

materially reduced or the control system fails completely. Ambient temperature might be excessively high, as that found in a steel

mill. Moisture-laden air and airborne particulate matter might be present to adversely affect the electronic components, as in the

paper manufacturing industry. Air conditioners are designed to perform reliably under many of these harsh conditions and to

provide the cooling and environmental protection required by sensitive electronic production control systems.

Factors Affecting Model Selection

This section is presented as a basic outline or checklist of the various application conditions to be considered when choosing a

cooling unit. These are the factors which must be considered when selecting a cooling unit:

Internal Heat Load

This is the heat dissipated by the electronic controls. It is expressed in watts. One WATT equals 3.413 BTU/HR. Thus, to obtain the

approximate cooling capacity required to remove a specific heat load, the following formula can be used: Watts x 3.413 - BTU/HR.

For example, a heat load of 800 watts, require an air conditioner capable of removing at least 2,730 BTU/HR.

Resistance to Airflow in the Enclosure

Airflow is measured in cubic feet per minute (CFM). To create an air flow of any desired velocity requires that pressure be

produced by the blower. Resistance to this blower-produced air flow is created by obstructions within the cabinet in the air flow

path. The resistance itself is called static pressure (SP) and is measured in inches of water column.The effect of significant

restrictions in the cabinet air flow path are as follows:

• the obstructions cause static pressure.

• static pressure results in a pressure drop, or differential, from the air velocity produced by the blower.

• this reduction in cool air flow will decrease the effective capacity of the cooling unit. Allowance must be made for

static pressure.

Heat Load from the Surroundings

Ambient conditions can cause a heat gain in the enclosure. The rated capacity of the cooling unit must be sufficient to handle this

heat gain. When evaluating the additional heat load gained from the surroundings there are two possible conditions:

• the cabinet is insulated and well sealed

• the cabinet is not insulated.

Cabinet Insulated - Normally, well-insulated cabinets do not gain sufficient heat from the surroundings to affect the air conditioner

operation. BTU/HR ratings for Kooltronic air conditioners have been established at the maximum ambient operating temperature

of 125˚F. A substantial improvement in heat removal occurs when operating in ambient temperatures below 125˚F.

Cabinet Not Insulated - Obviously, this design places more of a burden on the cooling unit. Heat is conducted to the cool side.

Thus, high ambient heat will be readily transmitted into the cooler enclosure. To determine the additional capacity required of an

air conditioner installed in an uninsulated cabinet, the surface area of the enclosure must be calculated to obtain the total effective

heat transfer area. For this calculation, use the surface area of the sides, plus the area of the top and omit the bottom area of the

cabinet.

Air movement outside the uninsulated cabinet will increase the heat conducted from the ambient into the enclosure. When there

is little or no air circulation outside the cabinet, the layer of air immediately adjacent to the exterior cabinet walls acts as an

insulating film. Exterior air movement dissipates this insulating layer of air in proportion to the velocity of the air flow. Substantial

ambient air circulation will increase the transmitted heat load imposed on the cooling unit. If the cabinet being cooled is not air

tight, high ambient relative humidity will adversely affect the cooling effectiveness of the air conditioner. When humid air infiltrates

a poorly sealed enclosure, the air conditioner is required to use up valuable capacity just to condense the moisture from the

internal air. Conversely, if the cabinet is well sealed, high ambient relative humidity has very little effect on the rated capacity of

the air conditioner.

Climate Control Products

The proper selection of an air conditioner is determined by the following criteria:

1) Required cooling capacity BTU/HR.

2) Mounting requirements (top, side or internal mounting)

3) Dimensions of air conditioner & enclosure

Air Conditioners Sizing & Selection

Climate Control

Fourth: (Watts x 3.413) + [1.25 x Area ft.2 x Δ T (˚F)] = BTU/HR.

First Second Third

1 Watt = 3.413 BTU/HR

Determine the internal Watts of heat to be

dissipated.

1 M2 = 10.76 ft2

Calculate the area of the enclosure which is

exposed to the ambient air:

2H” (W”+ D”) + (D” x_W” ) = Area (ft2)

144

1˚C Δ T = 1.8˚FΔ T

Determine the temperature differential

Δ T (˚ F) by subtracting the maximum allowable internal cabinet temperature (Ti

)

from the maximum ambient temperature

outside of the enclosure (To): To - Ti = Δ T

H

W

D

Ti

To

To determine air conditioner capacity required:

Climate Control

Air Conditioner Accessories and Options

Climate Control

Notes: Data subject to change without notice. Consult factory for special requirements.

374

Factory Installed Options

Accessories & Options

• Adapter Plates

• Compressor Heater

• Condensate Evaporator Kit

• Deep Drain Pan Kit

• Enclosure Heater

• Filter Recoating Adhesive

• Internal Corrosion Protection

• Lifting Eyes

• Low Airflow Detector

• Low Ambient Kit

• Mounting Hinge

• Programmable Thermostat

• Replacement Filters

• Short Cycle Protector

• Special Motors, Line Cords, or Connectors

• Special Materials or Finishes

• Stainless or Aluminum Cabinet

• Temperature Alarm

• Weather Protection Kit

Some options may not be available on selected models.

Some options are available as standard features on selected models.

Eaton B-Line series electrical enclosures

Climate Control Products

Climate Control

375

Guardian DP15

NEMA 4 or 4X Air Conditioners

KNA4C1DP15L 4 1160 950 131 -20 55 -29 115/100 60/50 4.3 26 12

KNA4C1DP15LV 4X 1160 950 131 -20 55 -29 115/100 60/50 4.3 26 12

* 115V 60 Hz models perform at reduced capacity when operated at 100V 50 Hz.

** Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. **

NEMA BTU/H Rating °F °C * Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

Accessories & Options

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Remote Thermostat Relay

• Replacement Filters (P/N: 525F)

• Special Motors, Line Cords or Connectors

• Special Paint Finishes

• Stainless or Aluminum Shell

NEMA

TYPE 4 OR 4X

MAINTAINED

Standard Features

• Baked Powder Finish

• Built-in Condensate Evaporator

• CFC-Free Refrigerant

• Closed-Loop Cooling

• Compressor Short Cycle Protector

• Epoxy-Coated Condenser Coils

• Filter

• Heavy-duty Steel Shell

• Internal Corrosion Protection (NEMA 4X Models)

• Low Temperature Control Thermostat*

• NEMA 12, 3R and 4 Ratings Maintained (UL50)

• Six-Foot [1.8m] (Minimum) 3-Wire Power Cord

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

* Transitioning to programmable controls

Drawings

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

Performance

Operation within shaded area not recommended.

B-Line series electrical enclosures Eaton

Transitioning to

ANSI 61 Gray finish

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Climate Control

376

Guardian DP21

NEMA 4 or 4X Air Conditioners

Accessories & Options

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Remote Thermostat Relay

• Replacement Filters (P/N: 8388F)

• Special Motors, Line Cords or Connectors

• Special Paint Finishes

• Stainless or Aluminum Shell

NEMA

TYPE 4 OR 4X

MAINTAINED

Standard Features

• Baked Powder Finish

• Built-in Condensate Evaporator

• CFC-Free Refrigerant

• Closed-Loop Cooling

• Compressor Short Cycle Protector

• Condenser Blower Controller

• Epoxy-Coated Condenser Coils

• Filter

• Heavy-duty Steel Shell

• Internal Corrosion Protection (NEMA 4X Models)

• Low Temperature Control Thermostat*

• NEMA 4 or 4X Rating Maintained (UL50)

• Six-Foot [1.8m] (Minimum) 3-Wire Power Cord

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

* Transitioning to programmable controls

Performance

Operation within shaded area not recommended.

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

Drawings

Eaton B-Line series electrical enclosures

Transitioning to

ANSI 61 Gray finish

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

KNA4C3DP21L 4 3000 2470 131 -20 55 -29 115/100 60/50 6.0/5.0 54 25

KNA4C3DP21LV 4X 3000 2470 131 -20 55 -29 115/100 60/50 6.0/5.0 54 25

* 115V 60 Hz models perform at reduced capacity when operated at 100V 50 Hz.

** Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. **

NEMA BTU/H Rating °F °C * Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

Climate Control

377

Guardian DP33

NEMA 4 or 4X Air Conditioners

KNA4C5DP33L 4 5000 4000 131 -20 55 -29 115/100 60/50 10.6/10.2 95 43

KNA4C5DP33LV 4X 5000 4000 131 -20 55 -29 115/100 60/50 10.6/10.2 95 43

* 115V 60 Hz models perform at reduced capacity when operated at 100V 50 Hz.

** Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. **

NEMA BTU/H Rating °F °C * Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

NEMA

TYPE 4 OR 4X

MAINTAINED

Standard Features

• Baked Powder Finish

• Built-in Condensate Evaporator

• CFC-Free Refrigerant

• Condenser Impeller Speed Controller

• Epoxy-Coated Condenser Coils

• Filter

• Heavy-duty Steel Shell

• Internal Corrosion Protection (NEMA 4X Models)

• Low Temperature Control Thermostat*

• NEMA 4 or 4X Rating Maintained (UL50)

• Six-Foot [1.8m] (Minimum) 3-Wire Power Cord

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

* Transitioning to programmable controls

Performance

Operation within shaded area not recommended.

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

Accessories & Options

• Compressor Short Cycle Protector

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Other Voltages and Frequencies

• Remote Thermostat Relay

• Replacement Filters (P/N: 9501F)

• Special Motors, Line Cords or Connectors

• Special Materials and Finishes

• Temperature Alarm

• Available in 230V Models

Drawings

B-Line series electrical enclosures Eaton

Transitioning to

ANSI 61 Gray finish

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Climate Control

378

Guardian DP47

NEMA 4 or 4X Air Conditioners

KNA4C9DP47L 4 9000 7400 131 -20 55 -29 115/100 60/50 19.2 135 61

KNA4C9DP47LV 4X 9000 7400 131 -20 55 -29 115/100 60/50 19.2 135 61

* 115V 60 Hz models perform at reduced capacity when operated at 100V 50 Hz.

** Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. **

NEMA BTU/H Rating °F °C * Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

NEMA

TYPE 4 OR 4X

MAINTAINED

Standard Features

• Baked Powder Finish

• Built-in Condensate Evaporator

• CFC-Free Refrigerant

• Condenser Impeller Speed Controller

• Epoxy-Coated Condenser Coils

• Filter

• Heavy-duty Steel Shell

• Internal Corrosion Protection (NEMA 4X Models)

• Low Temperature Control Thermostat*

• NEMA 4 or 4X Rating Maintained (UL50)

• Six-Foot [1.8m] (Minimum) 3-Wire Power Cord

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

* Transitioning to programmable controls

Accessories & Options

• Compressor Short Cycle Protector

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Other Voltages and Frequencies

• Remote Thermostat Relay

• Replacement Filters (P/N: 8001F)

• Special Motors, Line Cords or Connectors

• Special Materials and Finishes

• Temperature Alarm

• Available in 230V Models

Drawings

Performance

Operation within shaded area not recommended.

Eaton B-Line series electrical enclosures

Transitioning to

ANSI 61 Gray finish

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

Climate Control Products

Climate Control

379

Guardian DP50

NEMA 4 or 4X Air Conditioners

K2NA6C14DP50L 4 14000 13000 131 -20 55 -29 230 60 13.5 207 94

K2NA6C14DP50LV 4X 14000 13000 131 -20 55 -29 230 60 13.5 207 94

* 115V 60 Hz models perform at reduced capacity when operated at 100V 50 Hz.

** Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. **

NEMA BTU/H Rating °F °C * Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

NEMA

TYPE 4 OR 4X

MAINTAINED

Standard Features

• Baked Powder Finish

• Built-In Condensate Evaporator

• Closed-Loop Cooling

• Condenser Blower Controller

• Epoxy-Coated Condenser Coils

• Filters (2)

• Heavy-duty Steel Shell

• Internal Corrosion Protection (NEMA 4X Models)

• Low Temperature Control Thermostat*

• NEMA 4 or 4X Rating Maintained (UL50)

• Six-Foot [1.8m] (Minimum) 3-Wire Power Cord

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

• Zero ODP Refrigerant

* Transitioning to programmable controls

Performance

Operation within shaded area not recommended.

* Operation at 50Hz will be 10% less.

Accessories & Options

• Compressor Short Cycle Protector

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Other Voltages and Frequencies

• Remote Thermostat Relay

• Replacement Filters (P/N: 13658F)

• Special Motors, Line Cords or Connectors

• Special Materials and Finishes

• Temperature Alarm

Drawings

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

B-Line series electrical enclosures Eaton

Transitioning to

ANSI 61 Gray finish

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Climate Control

380

Guardian Series DP24

480 Volt 1-Phase NEMA 4 or 4X Air Conditioners

K3NA4C3DP24L 4 3000 2500 125 -20 52 -29 480/1 60 1.4 61 27

K3NA4C3DP24LV 4X 3000 2500 125 -20 52 -29 480/1 60 1.4 61 27

* Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. *

NEMA BTU/H Rating °F °C Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

NEMA

TYPE 4 OR 4X

MAINTAINED

Standard Features

• Baked Powder Finish

• 480 Volt 1-Phase

• Built-In Condensate Evaporator

• CFC - Free Refrigerant

• Closed-Loop Cooling

• Compressor Short Cycle Protector

• Condenser Blower Controller

• Epoxy-Coated Condenser Coils

• Filter

• Heavy-duty Steel Shell

• Internal Corrosion Protection (NEMA 4X Models)

• Low Temperature Control Thermostat*

• NEMA 4 or 4X Rating Maintained (UL50)

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

* Transitioning to programmable controls

Performance

Operation within shaded area not recommended.

Accessories & Options

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Remote Thermostat Relay

• Replacement Filters (P/N: 8388F)

• Special Materials and Finishes

• Stainless or Aluminum Shell

Drawings

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

Eaton B-Line series electrical enclosures

Transitioning to

ANSI 61 Gray finish

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Climate Control

381

Guardian Series DP38

480 Volt 3-Phase NEMA 4 or 4X Air Conditioners

K3NA4C5DP38L 4 5000 4800 131 0 55 -18 480 60 2.0 115 52

K3NA4C5DP38LV 4X 5000 4800 131 0 55 -18 480 60 2.0 115 52

* Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. *

NEMA BTU/H Rating °F °C Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

NEMA

TYPE 4 OR 4X

MAINTAINED

Standard Features

• Baked Powder Finish

• Built-In Condensate Evaporator

• CFC - Free Refrigerant

• Closed-Loop Cooling

• Condenser Impeller Speed Controller

• Epoxy-Coated Condenser Coils

• External Junction Box for Permanent

Wiring Connections

• Filter

• Heavy-duty Steel Shell

• Internal Corrosion Protection (NEMA 4X Models)

• Low Temperature Control Thermostat*

• NEMA 4 or 4X Rating Maintained (UL50)

• Phase Sequence/Phase Loss Detector/

Under Voltage Monitor

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

* Transitioning to programmable controls

Performance

Operation within shaded area not recommended.

Accessories & Options

• Compressor Short Cycle Protector

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Remote Thermostat Relay

• Replacement Filters (P/N: 9501F)

• Special Paint Finishes

• Temperature Alarm

Drawings

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

B-Line series electrical enclosures Eaton

Transitioning to

ANSI 61 Gray finish

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Climate Control

382

Guardian Series DP52

480-Volt 3-Phase NEMA 4 or 4X Air Conditioners

K3NA4C7DP52L 4 7000 6300 131 0 55 -18 480 60 3.0 160 72

K3NA4C7DP52LV 4X 7000 6300 131 0 55 -18 480 60 3.0 160 72

K3NA4C9DP52L 4 9000 8100 131 0 55 -18 480 60 4.0 164 75

K3NA4C9DP52LV 4X 9000 8100 131 0 55 -18 480 60 4.0 164 75

* Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. *

NEMA BTU/H Rating °F °C Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

NEMA

TYPE 4 OR 4X

MAINTAINED

Standard Features

• Baked Powder Finish

• Built-In Condensate Evaporator

• CFC - Free Refrigerant

• Closed-Loop Cooling

• Condenser Impeller Speed Controller

• Epoxy-Coated Condenser Coils

• External Junction Box for Permanent

Wiring Connections

• Filter

• Heavy-duty Steel Shell

• Internal Corrosion Protection (NEMA 4X Models)

• Low Temperature Control Thermostat*

• NEMA 4 or 4X Rating Maintained (UL50)

• Phase Sequence/Phase Loss Detector/

Under Voltage Monitor

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

* Transitioning to programmable controls

Accessories & Options

• Compressor Short Cycle Protector

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Remote Thermostat Relay

• Replacement Filters (P/N: 8001F)

• Special Paint Finishes

• Temperature Alarm

Drawings

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure Operation within shaded area not recommended.

Performance

Eaton B-Line series electrical enclosures

Transitioning to

ANSI 61 Gray finish

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Climate Control

383

SlimKool Series (narrow width) SP28

NEMA 4 or 4X Air Conditioners

KNA4C4SP28L 4 4000 3700 131 -20 55 -29 115/100 60/50 8.3 85 38.5

KNA4C4SP28LV 4X 4000 3700 131 -20 55 -29 115/100 60/50 8.3 85 38.5

* Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. *

NEMA BTU/H Rating °F °C Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

NEMA

TYPE 12, 3R, & 4

MAINTAINED

(4X OPTIONAL)

Standard Features

• Built-In Condensate Evaporator

• CFC - Free Refrigerant

• Closed-Loop Cooling

• Compact Design/Slim Mounting Footprints

• Compressor Short Cycle Protector

• Condenser Impeller Cycling Controller

• Epoxy-Coated Evaporator & Condenser Coils

• Filter

• Heavy-duty Steel Shell with ANSI Gray Polyester

Powder Coating

• Internal Corrosion Protection

• NEMA 12, 3R, and 4 Ratings

Maintained (UL50) (4X Optional)

• Programmable Temperature Alarm

• Programmable Thermostat

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

Accessories & Options

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Mounting Adapter Plates

• Remote Monitoring

• Remote Thermostat Relay

• Replacement Filters (P/N: 9501F)

• Available in 230V and 480V Models

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

Performance

Operation within shaded area not recommended.

Drawings

B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Climate Control

384

SlimKool Series (narrow width) SP36

NEMA 4 or 4X Air Conditioners

KNA4C6SP36L 4 6000 5600 131 -20 55 -29 115/100 60/50 9.6 100 45.3

KNA4C6SP36LV 4X 6000 5600 131 -20 55 -29 115/100 60/50 9.6 100 45.3

KNA4C8SP36L 4 8000 7500 131 -20 55 -29 115/100 60/50 14.4 100 45.3

KNA4C8SP36LV 4X 8000 7500 131 -20 55 -29 115/100 60/50 14.4 100 45.3

* Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. *

NEMA BTU/H Rating °F °C Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

NEMA

TYPE 12, 3R, & 4

MAINTAINED

(4X OPTIONAL)

Standard Features

• Built-In Condensate Evaporator

• CFC - Free Refrigerant

• Closed-Loop Cooling

• Compact Design/Slim Mounting Footprints

• Compressor Short Cycle Protector

• Condenser Impeller Cycling Controller

• Epoxy-Coated Evaporator & Condenser Coils

• Filter

• Heavy-duty Steel Shell with ANSI Gray

Polyester Powder Coating

• Internal Corrosion Protection

• NEMA 12, 3R, and 4 Ratings

Maintained (UL50) (4X Optional)

• Programmable Temperature Alarm

• Programmable Thermostat

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

Accessories & Options

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Mounting Adapter Plates

• Remote Monitoring

• Remote Thermostat Relay

• Replacement Filters (P/N: 9502F)

• Available in 230V Models

Performance

Operation within shaded area not recommended.

Drawings

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

Eaton B-Line series electrical enclosures

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products