Climate Control

385

SlimKool Series (narrow width) SP43

NEMA 4 or 4X Air Conditioners

KNA4C11SP43L 4 11000 9300 131 -20 55 -29 115/100 60/50 20.0/19.5 115 52

KNA4C11SP43LV 4X 11000 9300 131 -20 55 -29 115/100 60/50 20.0/19.5 115 52

* Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. *

NEMA BTU/H Rating °F °C Running Weight

Model Rating Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

NEMA

TYPE 12, 3R, & 4

MAINTAINED

(4X OPTIONAL)

Standard Features

• Built-In Condensate Evaporator

• CFC - Free Refrigerant

• Closed-Loop Cooling

• Compact Design/Slim Mounting Footprints

• Compressor Short Cycle Protector

• Condenser Impeller Cycling Controller

• Epoxy-Coated Evaporator & Condenser Coils

• Filter

• Heavy-duty Steel Shell with ANSI Gray Polyester

Powder Coating

• Internal Corrosion Protection

• NEMA 12, 3R, and 4 Ratings

Maintained (UL50) (4X Optional)

• Programmable Temperature Alarm

• Programmable Thermostat

• Stainless Steel Shell (NEMA 4X Models)

• UL/CUL Listed

Accessories & Options

• Enclosure Heater

• Filter Recoating Adhesive

• Lead-Lag Controller

• Mounting Adapter Plates

• Remote Monitoring

• Remote Thermostat Relay

• Replacement Filters (P/N: 9503F)

• Available in 230V and 480V Models

Performance

Operation within shaded area not recommended.

Drawings 1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Climate Control

386

Compact Series Horizontal

Top-Mounted Air Conditioners

KA4C4HTL 4000 2250 125 50 52 10 115/100 60/50 13.1 85 38

* Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. *

BTU/H Rating °F °C Running Weight

Model Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

Standard Features

• Built-In Condensate Evaporator

• CFC - Free Refrigerant

• Filter

• Low Temperature Control Thermostat

• UL/CUL Listed

Accessories & Options

• Compressor Short Cycle Protector

• Enclosure Heater

• Filter Recoating Adhesive

• Internal Corrosion Protection

• Lead-Lag Controller

• Lifting Eyes

• Low Airflow Detector

• Low Ambient Kit

• Remote Thermostat Relay

• Replacement Filters (P/N: 240F)

• Special Controls or Indicators

• Special Materials or Finishes

• Special Motors, Line Cords,

or Connectors

• Stainless or Aluminum Shell

• Temperature Alarm

• Available in 230V Models

Performance

Operation within shaded area not recommended.

Drawings

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

Eaton B-Line series electrical enclosures

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Climate Control

387

Compact Plus Series Horizontal

Top-Mounted Air Conditioners

KA4C5.0H5R 5000 3500 125 50 52 10 115/100 60/50 16.5 95 43

* Rating shown for operation at maximum ambient temperature.

95/95 Ambient Temp. *

BTU/H Rating °F °C Running Weight

Model Capacity BTU/H Max. Min. Max. Min. Volts Hz Amps lbs kg

Standard Features

• CFC - Free Refrigerant

• Filter

• Low Temperature Control Thermostat

• Reversible Condenser Outlet Blower

• UL Recognized

Accessories & Options

• Compressor Short Cycle Protector

• Brackets for Rack Mounting

• Enclosure Heater

• Filter Recoating Adhesive

• Internal Corrosion Protection

• Lead-Lag Controller

• Lifting Eyes

• Low Airflow Detector

• Low Ambient Kit

• Remote Thermostat Relay

• Replacement Filters (P/N: 4811F)

• Special Controls or Indicators

• Special Materials or Finishes

• Special Motors, Line Cords,

or Connectors

• Stainless or Aluminum Shell

• Temperature Alarm

• Available in 230V Models

Performance

Operation within shaded area not recommended.

Drawings

1 Condenser air inlet (ambient air in)

2 Condenser outlet (warm ambient air out)

3 Warm air return from enclosure

4 Cool air outlet to enclosure

B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Recognized

Climate Control

388 Eaton B-Line series electrical enclosures

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Filter Fans

NEMA 1 Box Fan

Description

High airflow with low noise operations makes these versatile

packaged fans very popular in a wide range of applications.

Reversible mounting brackets allow user to push or pull air

through the enclosure. In addition, these fans can be installed

internally or externally, vertically or horizontally, with or without

a filter. Utilizing the special motor-mount isolation system,

these fans operate virtually vibration-free. Front and rear grilles

can be adjusted to accommodate or omit filter. Filter slides in

and out easily for cleaning and replacement.

Accessories

All Packaged Fans

• Filter Recoating Adhesive

• Replacement Filters

(531F for KP40, 681F for KP60, 1081F for KP100)

• Special Materials or External finishes

• Special Motors, Line Cords or Connectors

• Variable Speed Control

• Adapters

• Grille Assemblies (KFG40, KFG60, KFG100) Includes Filter

Features

• Exceptionally Quiet

• Versatile Mounting and Adaptability

• Heavy-Gauge Steel Construction

• UL/CSA Ball-Bearing Motors

• Attractive Stainless Steel Grilles

• All models Can Pressurize or Exhaust

• Accessories and Options

A

B

C

D

D

E

G

Airflow

H

F

Additional Specifications

Permanent Filter: Furnished with each packaged fan.

Grille/Guard: KP40, KP60 and KP100 each include a rear guard and an attractive stainless steel grille and knurled captive

fasteners for easy removal. Grilles and guards comply with OSHA and UL safety standards.

KP40

Static Pressure

Airflow C.F.M.

KP60

Static Pressure

Airflow C.F.M.

KP100

Static Pressure

Airflow C.F.M.

Technical Data

Catalog CFM@ RPM Running Amps Watts Volts Weight

Number 0-inches nominal Run. L.P. Lbs kg

KP40 105 3000 0.18 0.33 15 115† 3.0 1.36

KP60 220 3300 0.29 0.35 33 115† 4.0 1.81

KP100 550 1600 0.49 1.30 60 115† 10.0 4.53

Dimensions Inches (mm)

Catalog A B C D E F G H

Number in mm in mm in mm in mm in mm in mm in mm in mm

KP40 6.13 156 7.38 187 2.37 60 5.62 143 6.37 162 4.12 04 .75 19 7.00 178

KP60 7.63 194 8.87 225 3.00 76 7.12 181 7.87 200 4.50 114 1.31 33 8.50 216

KP100 11.63 295 13.00 330 4.56 116 11.12 282 11.87 310 6.87 174 2.12 54 12.50 317

= For 230 volt models add a \"2\" after the \"K\" in the catalog number.

Climate Control

389 B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Advantage Sentry Series NEMA 3R

Filter Fans KNP100F

BLKNP100F 115 VAC 50/60 .35/.38 36/38 338/405 141/172 55/58 -40 158 -40 70 12.5 5.6

* Fan airflow without filter or grille.

** NEMA Rated if installed with provided filter.

Fan Fan w/Grille Operating Temp. Approx.

Frequency Input Input Airflow Airflow Noise °F °C Weight

Model Voltage Hz mA Watts CFM* CFM** db(A) Min. Max. Min. Max. lbs kg

Standard Features

• Baked Powder Finish

• Integrated Fan Guards

• Integrated Sealing Gasket

• Most Assemblies are UL/cUL Listed

• NEMA 3R Rating Maintained (if used

with provided filter)

• Secure Mounting

• UL/CSA Shielded Ball Bearing Motor

• Washable, Reuseable Filter

Accessories & Options

• Grille Assembly (P/N: KNPA100F)

• IP54 & IP55 Filter Protection Available

• Other Voltages, Both AC & DC

• Replacement Filters (P/N: 1081F)

• Available with Reversed Airflow Direction

Performance

Drawings

NEMA

TYPE 3R

MAINTAINED

Transitioning to

ANSI 61 Gray finish

Climate Control

390 Eaton B-Line series electrical enclosures

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Advantage Sentry Series

Filter Fans Filter-Grille Assemblies

BLKNPA100F

Model

Standard Features

• Integrated Sealing Gasket

• Surface Mounting

• Baked Powder Finish

• Washable, Reuseable Filter

Description

These Filter-Grille Assemblies can be used in conjunction with

the Advantage Sentry Series Filter Fans for enclosure cooling.

In a typical mounting orientation the motorized Filter Fan

pulls air into an enclosure while the Filter-Grille Assembly

functions as an outlet. Alternatively, if the reverse airflow

option is chosen for the filter fan, the fan exhausts the

enclosure and the Filter-Grille Assembly functions as an

intake. These Filter-Grille Assemblies feature filters that are

easily removed for cleaning or replacement .

Accessories & Options

• Replacement Filter (P/N: 1081F)

Drawings

Typical Mounting Orientations

Blue arrows show direction of airflow. Boxes represent side view of electronics/electrical enclosure.

(Left) Filter Fan pressurizes cabinet. (Right) Filter Fan with reverse option chosen.

Filter-Grille Assembly exhausts cabinet.

Transitioning to

ANSI 61 Gray finish

Climate Control

391 B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Guardian Series

NEMA 4 or 4X Filter Fans

Standard Features

• Baked Powder Finish

• Integrated Fan Guards

• Integrated Sealing Gasket

• IP55 Filter Protection

• Most Assemblies are UL/cUL Approved

• NEMA 4 or 4X Rating Maintained (if

used with provided filter)

• Secure Mounting

• Stainless Steel Shell (NEMA 4X Models)

• UL/CSA Shielded Ball Bearing Motors

• Washable, Reuseable Filter

Accessories & Options

• Filter-Hood Assembly (Recommended)

(P/N: BLKNPA60FL, BLKNPA60FLV)

• Other Voltages, Both AC & DC

• Replacement Filters (P/N: 0429-01-01)

• Available with Reversed Airflow Direction

Performance

Airflow vs. static pressure curves are shown for

60 HZ and 50 HZ (broken line) inputs.

Drawings

BLKNP40FL 4 115 VAC 50/60 .22/.19 14/13 90/106 40/45 52/55 -40 158 -40 70 10 4.5

BLKNP40FLV 4X 115 VAC 50/60 .22/.19 14/13 90/106 40/45 52/55 -40 158 -40 70 10 4.5

* Fan airflow without filter or grille.

** NEMA Rated if installed with provided filter.

Fan Fan w/Grille Operating Temp. Approx.

NEMA Frequency Input Input Airflow Airflow Noise °F °C Weight

Model Rating Voltage Hz mA Watts CFM* CFM** db(A) Min. Max. Min. Max. lbs kg

NEMA

TYPE 4 or 4X

MAINTAINED

Mounting Plan

For general ventilating use only. Do not use these fans to exhaust hazardous or

explosive material or vapors.

NOT ALL SYSTEMS ARE SUITABLE FOR UTILIZING OUTSIDE AIR. To protect

sensitive components against condensation an enclosure heater or closed-loop

cooling is recommended. To protect sensitive components against corrosive

elements closed-loop cooling is recommended.

Transitioning to

ANSI 61 Gray finish

Climate Control

392 Eaton B-Line series electrical enclosures

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Guardian Series

NEMA 4 or 4X Filter Fans

Standard Features

• Baked Powder Finish

• Integrated Fan Guards

• Integrated Sealing Gasket

• IP55 Filter Protection

• Most Assemblies are UL/cUL Approved

• NEMA 4 or 4X Rating Maintained (if

used with provided filter)

• Secure Mounting

• Stainless Steel Shell (NEMA 4X Models)

• UL/CSA Shielded Ball Bearing Motors

• Washable, Reuseable Filter

Accessories & Options

• Filter-Hood Assembly (Recommended)

(P/N: BLKNPA60FL, BLKNPA60FLV)

• Other Voltages, both AC & DC

• Replacement Filters (P/N: 0429-01-01)

• Available with Reversed Airflow Direction

Performance

Airflow vs. static pressure curves are shown for

60 HZ and 50 HZ (broken line) inputs.

Drawings

BLKNP60FL 4 115 VAC 50/60 .42/.34 43/37 270/290 84/92 59/61 -40 158 -40 70 11.3 5.1

BLKNP60FLV 4X 115 VAC 50/60 .42/.34 43/37 270/390 84/92 59/61 -40 158 -40 70 11.3 5.1

* Fan airflow without filter or grille.

** NEMA Rated if installed with provided filter.

Fan Fan w/Grille Operating Temp. Approx.

NEMA Frequency Input Input Airflow Airflow Noise °F °C Weight

Model Rating Voltage Hz mA Watts CFM* CFM** db(A) Min. Max. Min. Max. lbs kg

NEMA

TYPE 4 or 4X

MAINTAINED

Mounting Plan

For general ventilating use only. Do not use these fans to exhaust hazardous or

explosive material or vapors.

NOT ALL SYSTEMS ARE SUITABLE FOR UTILIZING OUTSIDE AIR. To protect

sensitive components against condensation an enclosure heater or closed-loop

cooling is recommended. To protect sensitive components against corrosive

elements closed-loop cooling is recommended.

Transitioning to

ANSI 61 Gray finish

Climate Control

393 B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in [ ] are for reference only.

Climate Control Products

Guardian Series

Filter Fans Filter-Hood Assemblies

BLKNPA60FL 4

BLKNPA60FLV 4X

Model NEMA Rating

Standard Features

• Filter

• Integrated Sealing Gasket

• IP55 Filter Protection

• NEMA 4 or 4X Rating Maintained (if

used with provided filter)

• Secure Mounting

• Stainless Steel Shell (NEMA 4X Models)

• Baked Powder Finish

• Washable, Reuseable Filter

Description

These Filter-Hood Assemblies can be used in conjunction with the

Guardian Series Filter Fans for enclosure cooling. In a typical

mounting orientation the motorized Filter Fan pulls air into an

enclosure while the Filter-Hood Assembly functions as an outlet.

Alternatively, if the reverse airflow option is chosen for the filter fan,

the fan exhausts the enclosure and the Filter-Hood Assembly

functions as an intake. These Filter-Hood Assemblies feature filters

that are easily removed for cleaning or replacement .

Accessories & Options

• Replacement Filters (P/N: 0429-01-01)

Drawings

Typical Mounting Orientations

Blue arrows show direction of airflow. Boxes represent side view of electronics/electrical enclosure.

(Left) Filter Fan pressurizes cabinet. (Right) Filter Fan with reverse option chosen.

Filter-Hood Assembly exhausts cabinet.

Transitioning to

ANSI 61 Gray finish

Climate Control

394 Eaton B-Line series electrical enclosures

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in ( ) are for reference only.

Climate Control Products

NEMA 12 Filter Fans

Applications

• Industrial and Process Automation

• Packaging and Logistical Systems

• Energy (Solar, Wind, Water and Petrochemical)

• Telecommunications

• Defense Systems

Standards

• UL Recognized

• CSA Listed

• IP54 Rated

• IP55 Capable with Optional Filter

• Type 12

Product Options

• 5 Different Size Footprints for Flexibility

• CFM Range of 21 CFM - 585 CFM

• Voltage : 115VAC *

• Operating Temperature: 14°F (-10°C) to 140°F (60°C)

• All Models UV Resistant ABS blend; RAL 7035

• MTBF of 50,000 Hours

• All Units Functionally Tested Before Shipment

* 230VAC, 460VAC, 12VDC, 24VDC, 48VDC

are also available in most model numbers

Construction

• Snap in mounting that does not require hardware

• Simple adjustment of airflow reversal; push/pull

• Retention clips designed to accept wide range of enclosures

• Hinged cover design for easy filter replacement

• Spring loaded terminal blocks for reliable electrical connection

• Gasketing and user manuals provided

Accessories

• Grills

• Replacement filters

Illustration shows reverse/pull set-up.

Standard ambient set-up will push cooler

outside air into the enclosure.

Climate Control

395 B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in ( ) are for reference only.

Climate Control Products

NEMA 12 Filter Fans

NEMA 12 Grills

NEMA 12 Replacement Filters

BLGSV1000203 14 21 NEMA 12 41

/2” Filter Fan 115VAC

BLGSV1500203 29 39 NEMA 12 6” Filter Fan 115VAC

BLGSV2000203 44 64 NEMA 12 8” Filter Fan 115VAC

BLGSV2500203 77 112 NEMA 12 10” Filter Fan 115VAC

BLGSV2501203 159 218 NEMA 12 10” Filter Fan 115VAC

BLGSV3000203 224 295 NEMA 12 121

/2” Filter Fan 115VAC

BLGSV30A1203 294 362 NEMA 12 121

/2” Filter Fan 115VAC Ambient

BLGSV30A2203 338 582 NEMA 12 121

/2” Filter Fan 115VAC Ambient

Model CFM w/ Equiv. CFM Rating Description

Exhaust Grill

BLAVAFAGS10 NEMA 12 41

/2” Replacement Filter (packed 10)

BLAVAFAGS15 NEMA 12 6” Replacement Filter (packed 10)

BLAVAFAGS20 NEMA 12 8” Replacement Filter (packed 10)

BLAVAFAGS25 NEMA 12 101

” Replacement Filter (packed 10)

BLAVAFAGS30 NEMA 12 121

/2” Replacement Filter (packed 10)

Model Rating Description

BLGSF10 NEMA 12 41

/2” Filter Grill

BLGSF15 NEMA 12 6” Filter Grill

BLGSF20 NEMA 12 8” Filter Grill

BLGSF25 NEMA 12 10” Filter Grill

BLGSF30 NEMA 12 121

/2” Filter Grill

Model Rating Description

CFM w/ Equiv. Exhaust Grill

Airf;ow (CFM)

700

600

500

400

300

200

100

0

CFM

BLGSV1000203

BLGSV1500203

BLGSV2000203

BLGSV2500203

BLGSV2501203

BLGSV3000203

BLGSV30A1203

BLGSV30A2203

Climate Control

396 Eaton B-Line series electrical enclosures

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in ( ) are for reference only.

Climate Control Products

NEMA 12 Filter Fans

BLGSV1000203 41

/2” Filter Fan 115VAC

Model Description

BLGSV1500203 6” Filter Fan 115VAC

Model Description

Cut-Out

Dimensions

Cut-Out

Dimensions

BLGSV1500203 - Performance Chart

BLGSV1000203 - Performance Chart

Climate Control

397 B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in ( ) are for reference only.

Climate Control Products

NEMA 12 Filter Fans

BLGSV2000203 8” Filter Fan 115VAC

Model Description

BLGSV2500203 10” Filter Fan 115VAC

Model Description

Cut-Out

Dimensions

Cut-Out

Dimensions

BLGSV2500203 - Performance Chart

BLGSV2000203 - Performance Chart

Climate Control

398 Eaton B-Line series electrical enclosures

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in ( ) are for reference only.

Climate Control Products

BLGSV2501203 - Performance Chart

NEMA 12 Filter Fans

BLGSV2501203 10” Filter Fan 115VAC

Model Description

BLGSV3000203 12.5” Filter Fan 115VAC

BLGSV30A1203 12.5” Filter Fan 115VAC Ambient

BLGSV30A2203 12.5” Filter Fan 115VAC Ambient

Model Description

Cut-Out

Dimensions

Cut-Out

Dimensions

BLGSV3000203 - Performance Chart

BLGSV30A1203 - Performance Chart

BLGSV30A2203 - Performance Chart

Climate Control

399 B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in ( ) are for reference only.

Climate Control Products

Heater Calculation Sheet

Climate Control

Enclosure Heaters are used to maintain minimum operating temperatures and to help prevent

failure of electronic components caused by condensation and corrosion.

Follow steps 1-5 to determine the heating requirement of an enclosure (US units - left column, metric - right column)

STEP 1: Determine Surface Area (A) exposed to open air

Enclosure Dimensions: height = feet meters

width = feet meters

depth = feet meters

Assuming a free-standing enclosure ⇒ A = 2 (Height x Width) + 2 (Height x Depth) + 2 (Width x Depth)

STEP 2: Choose the Heat Transmission Coefficient (k) for your enclosure

painted steel = 0.511 W/(ft2 • K) 5.5 W/(m2 • K)

stainless steel = 0.344 W/(ft2 • K) 3.7 W/(m2 • K)

aluminum = 1.115 W/(ft2 • K) 12 W/(m2 • K)

plastic (or insulated stainless) = 0.325 W/(ft2 • K) 3.5 W/(m2 • K)

STEP 3: Determine the Temperature Differential (ΔΤ)

Desired interior temperature = °F °C

Lowest ambient temperature = °F °C

Temperature differential = °F °C = K

⇓

Calculation requires ΔΤ to be in Kelvin (K)

Divide ΔT (°F) by 1.8 for

STEP 4: Determine Heating Power (PV), if any

PV = components in the enclosure which generates heat (i.e. transformers, power supplies, etc.)

STEP 5: Calculating the Required Heating Power (PH)

If enclosure is located inside:

If enclosure is located outside:

A = ft2 or m2

PV = W or W

ΔT = K or K

k = W/(ft2 • K) W/(m2 or • K)

PH = (A x k x ΔT) - PV = W

PH = 2 x (A x k x ΔT) - PV = W

Climate Control

400 Eaton B-Line series electrical enclosures

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in ( ) are for reference only.

Climate Control Products

Heaters

PTC Fan Heaters

Climate Control Description

PTC fan heaters are designed to help prevent failure of

electronic components caused by condensation, corrosion

and low temperatures. Integrated thermostat stabilizes

enclosure temperature, improves performance and extends

the life of critical components. EFHT series fan heaters

are designed for larger applications with high power

requirements.

Features

• Compact fan heater in PTC technology

• PTC (Positive Temperature Coefficient) heating element

• Maintains minimum operating temperatures in enclosures

• Helps prevent failure of electronic components caused by

condensation and corrosion

• Heating power adjusts to ambient temperature

• Integrated adjustable thermostat and control light

• 35 mm DIN rail mountable

• UL, VDE, and CE

Discount Schedule: C2

Subclass: TG0

Catalog Number Voltage Power Max. current Axial Fan Thermostat range Weight

(inrush) (ball bearing) lbs kg

EFHT550F-120 110-120 VAC 550 W (60 Hz) 14 A 20 cfm (35 m3

/h) 32-140°F 2 0.9

EFHT650F-120 110-120 VAC 650 W (60 Hz) 15 A 26 cfm (45 m3

/h) 32-140°F 2.4 1.1

Heating Power / Ambient Temperature at 60Hz

Heating Power (W)

For spacing, add 2” clearance to heat sensitive parts.

Ambient Temperature

6.30 (160mm)

4.88 (124mm)

5.04

(128mm)

6.50

(165mm)

3.94

(100mm)

Technical Data

Heating element: PTC-Semiconductor/resistor. Self regulating with

changing ambient temperature (see graph below)

Overheat protection: Temperature limitor in case of fan failure

Function control light: LED

Housing: Plastic, rated UL94V-0

Dimensions (HxWxD): 6.5x3.94x5” (165x100x128 mm)

Connection: 2 pole terminal, AWG 14, max. (2.5 mm2

)

Mounting: Clip for 35 mm DIN rail, EN 50022

Protection class: II (double insulated)

Protection type: IP20

Climate Control

401 B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in ( ) are for reference only.

Climate Control Products

Heaters

PTC Heater

Climate Control

Description

PTC heaters are designed to help prevent failure of electronic

components caused by condensation, corrosion and low

temperatures. EH15 series feature PTC technology and are

designed for smaller enclosure applications with lower wattage

requirements.

Features

• Compact heater in PTC technology

• PTC (Positive Temperature Coefficient) heating element

• Maintains minimum operating temperatures in enclosures

• Helps to prevent failure of electronic components caused by

condensation and corrosion

• Push connectors for quick and easy wiring

• 35 mm DIN rail mountable

• UL, VDE, and CE

Discount Schedule: C2

Subclass: TG0

Technical Data

Operating voltage: AC/DC 110-250V

Heating element: PTC resistor, self regulating

Heating body: Anodized extruded aluminum

Protection class: I, test voltage 1600V

Protection type: IP20

Connection: Push type terminals for stranded and rigid

wire 3 x AWG 20-AWG 16 (0.5-2.5 mm2

)

Mounting: Clip for 35 mm DIN rail, EN 50022

Agency approvals: UL, VDE

Easy wiring by using push-type terminals

Catalog Number Power(1) Max. Current(2) L Weight

in. mm lbs kg

EH15 15W 0.5A 2.6 65 0.66 0.3

EH30 30W 1.0A 2.6 65 0.66 0.3

EH45 45W 1.0A 2.6 65 0.66 0.3

EH60 60W 1.5A 5.5 140 1.10 0.5

EH75 75W 1.8A 5.5 140 1.10 0.5

EH100 100W 2.4A 5.5 140 1.10 0.5

EH150 150W 4.5A 8.7 220 1.76 0.8

(1) At 68°F (20°C) ambient temperature. (2) Inrush current

Pending

2.76

(70mm)

2.36

(60mm)

1.97

(50mm)

0.79

(20mm)

L

1.85

(47mm)

0.20

(5mm)

1.54

(39mm)

Climate Control

402

Climate Control Products

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in ( ) are for reference only.

Eaton B-Line series electrical enclosures

Heaters

Fan Heaters

Climate Control Description

Fan heaters are designed to help prevent failure of electronic

components caused by condensation, corrosion and low

temperature. EFH100-120 series feature a wide wattage range

for maximum versatility in a small compact design.

Features

• Small compact size fan heater

• Maintains minimum operating temperatures in enclosures

• Helps prevent failure of electronic components caused by

condensation and corrosion

• Built-in overheat protection

• 35 mm DIN rail mountable

Discount Schedule: C2

Subclass: TG0

Shown: EFH100

Catalog Number Power Voltage Air Flow

cfm min. m3

/h min.

EFH100-120 100W 110-120 VAC 20 35

EFH150-120 150W 110-120 VAC 20 35

EFH200-120 200W 110-120 VAC 63 108

EFH300-120 300W 110-120 VAC 63 108

EFH400-120 400W 110-120 VAC 63 108

G

L1 L2

N1

N2

100W/150W Heater

200W/300W/400W Heater

0.98

(25mm) 0.87

(22mm)

2.81

(71mm)

2.68

(68mm)

3.15

(80mm)

typ.

Label

Axial

Fan

Airflow

Mounting hole for

DIN clip

Mounting hole for

DIN clip

0.71

(18mm)

0.98

(25mm) 0.87

(22mm)

Axial

Fan

Airflow

0.71

(18mm)

1.26

(32mm)

4.13

(105mm)

2.68

(68mm)

4.68

(119mm)

typ.

Label 1.26

(32mm)

(4) 0.16 (4mm)

Dia. Holes

(4) 0.16 (4mm)

Dia. Holes

Technical Data

Heating element: Resistance type heater

Heat sink: Die-cast aluminum, glass bead finish

Overheat protection: Built-in temperature limitor

Air exit temperature: Approx. 113°F (45°C) 2” (50 mm) above heater

Wiring compartment: Plastic UL94V-0

Wiring of axial fan: 2 pole terminal (L2/N2), AWG14 max. (2.5 mm2

)

Mounting: Clip for 35 mm DIN rail, EN 50022

Protection type/class: IP44/I (grounded)

Weight: 100/150W: 0.6 lbs. (240 kg) without fan

200/300/400W: 1.1 lbs. (490 kg) without fan

Agency approvals: UL

Caution: Heater may only be operated with fan.

Climate Control

403 B-Line series electrical enclosures Eaton

Notes: Data subject to change without notice.

Consult factory for special requirements. Dimensions are in inches. Millimeters shown in ( ) are for reference only.

Climate Control Products

Temperature & Humidity Controls

Small Thermostat

Climate Control

Electronic Humidity and Temperature Control

Description

Small thermostats are easy to install and designed to regulate the air

temperature inside enclosures. Thermostats increase operating life

of fans, heaters and heat exchangers. ESTNC-F (normally closed)

thermostat opens at temperature rise and is used to control

heaters and low temperature alarms. ESTNO-F (normally open)

thermostat closes at temperature rise and is used to control

cooling fans, air conditioners and high temperature alarms.

Features

• Compact design

• Wide adjustment range

• Color coded temperature dials Discount Schedule: C2

• 35 mm DIN rail mountable Subclass: TG0

• Tolerance ±7.2°F (4K)

• 2-pole terminal for AWG 14 max.

• Protection type: IP30

• Plastic housing UL94V-0

Description

Electronic humidity and temperature control regulates the air

temperature and relative humidity inside enclosures. Depending on

which contact combination is chosen, the control turns on or off a

connected device if either the temperature is below, or the humidity

is above the set point.

Features

• Controls both temperature and humidity

• High switching capacity

• Optical function display

• 35 mm DIN rail mountable Discount Schedule: C2

• Tolerance ±3.6°F (2k) Subclass: TG0

• 5-pole terminal for AWG 14 max.

• Protection type: IP20

• Plastic housing UL94V-0

Catalog Number Contact Type Switching Capacity Switching Capacity Housing Dimensions

@ 120 VAC @ 250 VAC Scale in mm

ESTNC-F Normally closed 15A resistive/1A inductive 10A resistive/1A inductive 30-140°F 2.4x1.3x1.4 60x33x35

ESTNO-F Normally opened 15A resistive/1A inductive 10A resistive/1A inductive 30-140°F 2.4x1.3x1.4 60x33x35

Contacts close at... open at... use for

humidity rise humidity drop heaters

3 and 5 or or de-humidifiers

temperature drop temperature rise low-temp alarms

humidity drop humidity rise cooling

4 and 5 or or humidifiers

temperature rise temperature drop high-temp alarms

Catalog Number Temperature Range Humidity Range Voltage Hz Switching Capacity Switching Capacity Dimensions

@ 120 VAC @ 240 VAC in. mm

EHTC120-F 32-140°F 50-90% RH 120 VAC 50/60 8A Resistive 8A Resistive 2.6x2.0x1.5 67x50x39

adjustable adjustable 7 FLA/45 LRA 5 FLA/30 LRA

ESTNC-F

ESTNO-F

Climate Control

404

Climate Control Products

Eaton B-Line series electrical enclosures

Panels

JIC & Small Panels, RHC Panels, Type 1 Medium Panels,

NEMA Panels, JIC Perforated Panels, Medium Perforated

Panels, Flanged Panels, Wood Back Panels, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406-413

Panel Accessories - JIC & NEMA Swing Panel Kits, Panel Supports, Lifting Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414-416

Window Kits - Fixed & Hinged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417-418

Door Accessories - Door Stops & Print Pockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 418

Locks, Latches, Inserts, Handles, Clamps

Locks, Latches, Inserts, & Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419-429

Clamp Kits, Padlock Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430-432

Bolt-On Accessories

Folding Shelf Kit & Gland Plates, Floor Stand Kit & Stabilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433-434

Louver Plate Kits, Filters, & Filter Adhesive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435-436

Baffle Plates & Hole Seals, Drip Shields & Casters, Barriers, Component Mounting Device . . . . . . . . . . . . . . . . . 437-440

Electrical Accessories

JIC & NEMA Terminal Strap & Block Strip Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441-443

Terminal Blocks - Channel Mounted & Flat Base, Terminal Strap Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444-446

Enclosure Lights & Interlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 446-448

Door Switch & Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449-450

Disconnect Adapter Kits & Blank Adapter Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451

Columns & Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452-453

Hardware

Hardware Packages, Ground Lug & Devices, Sealing Devices, Clamping

Nuts, Touch-Up Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 454-456

Accessories

Accessories

405 B-Line series electrical enclosures Eaton

Panels & Panel Accessories Discount Schedule: C2; A2

JIC & Small Panels Subclass: DSA - JIC

Illustration Sheet and Catalog Number DSE - Small Enclosure

JIC Flat Panel Catalog Number Fits Enclosure

Painted Galvanized A B Height x Width

Steel Steel Stainless Aluminum in. mm in. mm Gauge in. mm

AW64P AW64GP AW64SP AW64AP 4.87 124 2.87 73 14 6.00x4.00 152x102

AW66P AW66GP AW66SP AW66AP 4.87 124 4.87 124 14 6.00x6.00 152x152

AW86P AW86GP AW86SP AW86AP 6.87 174 4.87 124 14 8.00x6.00 203x152

AW88P AW88GP AW88SP AW88AP 6.87 174 6.87 174 14 8.00x8.00 203x203

AW108P AW108GP AW108SP AW108AP 8.87 225 6.87 174 14 10.00x8.00 254x203

AW1010P AW1010GP AW1010SP AW1010AP 8.87 225 8.87 225 14 10.00x10.00 254x254

AW126P -- - 10.87 276 4.87 124 14 12.00x6.00 305x152

AW1210P AW1210GP AW1210SP AW1210AP 10.87 276 8.87 225 14 12.00x10.00 305x254

AW1212P AW1212GP AW1212SP AW1212AP 10.87 276 10.87 276 14 12.00x12.00 305x305

AW148P -- - 12.87 327 6.87 174 14 14.00x8.00 356x203

AW1412P AW1412GP AW1412SP AW1412AP 12.87 327 10.87 276 14 14.00x12.00 356x305

AW1610P -- - 14.87 378 8.87 225 14 16.00x10.00 406x254

AW1614P AW1614GP AW1614SP AW1614AP 14.87 378 12.87 327 14 16.00x14.00 406x356

Small Enclosure Fits Enclosure

Flat Panel A B Height x Width

Catalog Number in. mm in. mm Gauge in. mm

N66P 4.25 108 4.25 108 14 6.00x6.00 152x152

N86P 6.25 159 4.25 108 14 8.00x6.00 203x152

N88P 6.25 159 6.25 159 14 8.00x8.00 203x203

N108P 8.25 210 6.25 159 14 10.00x8.00 254x203

N1010P 8.25 210 8.25 210 14 10.00x10.00 254x254

N1210P 10.25 260 8.25 210 14 12.00x10.00 305x254

N1212P 10.25 260 10.25 260 14 12.00x12.00 305x305

N1412P 12.25 360 10.25 260 14 14.00x12.00 356x305

N2012P 18.25 463 10.25 260 14 20.00x12.00 508x305

JIC panels can be installed in all types of JIC

Enclosures. Some sizes will fit the NEMA 12

Lay-In Wireway Junction Box. Panels are

available in steel, galvanized steel, stainless

and aluminum. Painted steel panels have a

white powder finish. Stainless steel and

aluminum panels have a smooth brushed

finish on one side and protected with PVC

film.

Small Enclosure panels can be installed in

Small Type 3R RHC and Small Type 1

Enclosures. Panels are only available in steel,

and have a white powder finish.

B

.31

(8)

.31

(8)

.31

(8)

.31

(8)

B

.25 D hole

(6)

.25 D hole

(6)

enclosure width -1.75

(44)

enclosure height -1.75 (44) enclosure height -2.37 (60)

enclosure width -2.37

(60)

A

A

Accessories

Small

Enclosure

Panels JIC Panels

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

406

Accessories

Eaton B-Line series electrical enclosures

Flat Panel Fits Enclosure

Catalog Number A B Height x Width

in. mm in. mm Gauge in. mm

N1612P 13.00 330 9.00 229 12 16.00x12.00 406x305

N1616P 13.00 330 13.00 330 12 16.00x16.00 406x406

N1818P 15.00 381 15.00 381 12 18.00x18.00 457x457

N2016P 17.00 432 13.00 330 12 20.00x16.00 508x406

N2020P 17.00 432 17.00 432 12 20.00x20.00 508x508

Flanged Panel Fits Enclosure

A B Height x Width

Catalog Number in. mm in. mm Gauge in. mm

N2420P 20.87 530 16.87 428 12 24.00x20.00 610x508

N2424P 20.87 530 20.87 530 12 24.00x24.00 610x610

N3024P 26.87 682 20.87 530 12 30.00x24.00 762x610

N3624P 32.87 835 20.87 530 12 36.00x24.00 914x610

N3030P 26.87 682 26.87 682 12 30.00x30.00 762x762

N3630P 32.87 835 26.87 682 12 36.00*x30.00* 914x762

N4230P 38.87 987 26.87 682 12 42.00*x30.00* 1067x762

N4830P 44.87 1140 26.87 682 12 48.00*x30.00* 1219x762

N3636P 32.87 835 32.87 835 12 36.00x36.00 914x914

N4236P 38.87 987 32.87 835 12 42.00*x36.00* 1067x914

N4836P 44.87 1140 32.87 835 12 48.00*x36.00* 1219x914

N6036P 56.87 1444 32.87 835 12 60.00x36.00 1524x914

RHC Flanged Panels can be installed in Large Type 3R

RHC Enclosures. Panels are only available in steel and

have a white powder paint finish.

RHC Flanged Panels

RHC Flat Panels can be installed in Large Type 3R

RHC Enclosures. Panels are only available in steel

and have a white powder paint finish.

RHC Flat Panels

B

B

A

A enclosure height -4.75 (121) enclosure height -4.75 (121)

enclosure width -4.75

(121)

enclosure width -4.75

(121)

(omit when enclosure height

is less than 36 inches)

(omit when enclosure width

is less than 36 inches)

.56 D hole

(14)

.56 D hole

(14)

.75

(19) .81

(20)

.81

(20)

.88

(22)

.88

(22)

CL

CL

* Panel also fits these enclosures when height and width dimensions are reversed.

Panels & Panel Accessories Discount Schedule: C2

RHC Panels Subclass: DSE

Illustration Sheet and Catalog Number

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Accessories

407 B-Line series electrical enclosures Eaton

Accessories

Panels & Panel Accessories Discount Schedule: C2

Type 1 Medium Enclosure & NEMA Flat Panels Subclass: DSF - Type 1 Medium

Illustration Sheet and Catalog Number DSB - NEMA

NEMA Flat Panel Catalog Number Fits Enclosure

Painted Galvanized AB C D Height x Width

Steel Steel Stainless Aluminum in. mm in. mm in. mm in. mm Gauge in. mm

AW1612P AW1612GP AW1612SP AW1612AP 13.00 330 9.00 229 11.25 286 7.25 184 12 16.00x12.00 406x305

AW1616P AW1616GP AW1616SP AW1616AP 13.00 330 13.00 330 11.25 286 11.25 286 12 16.00x16.00 406x406

AW2012P --- 17.00 432 9.00 229 15.25 387 7.25 184 12 20.00x12.00 508x305

AW2016P AW2016GP AW2016SP AW2016AP 17.00 432 13.00 330 15.25 387 11.25 286 12 20.00*x16.00* 508x406

AW2020P AW2020GP AW2020SP AW2020AP 17.00 432 17.00 432 15.25 387 15.25 387 12 20.00x20.00 508x508

AW2412P - AW2412SP - 21.00 533 9.00 229 19.25 489 7.25 184 12 24.00*x12.00* 610x305

AW2416P AW2416GP AW2416SP AW2416AP 21.00 533 13.00 330 19.25 489 11.25 286 12 24.00x16.00 610x406

B

A

.56 D hole

(14)

* Panel also fits these enclosures when height and width dimensions are reversed.

Type 1 Medium Enclosure Fits Enclosure

Flat Panel AB C D Height x Width

Catalog Number in. mm in. mm in. mm in. mm Gauge in. mm

AW1612-1P 13.00 330 10.50 267 11.50 292 9.00 228 14 16.00x12.00 406X305

AW1616-1P 13.00 330 14.50 368 11.50 292 13.00 330 14 16.00x16.00 406X406

AW1620-1P 13.00 330 18.50 470 11.50 292 17.00 432 14 16.00x20.00 406X508

AW2016-1P 17.00 432 14.50 368 15.50 394 13.00 330 14 20.00x16.00 508X406

AW2020-1P 17.00 432 18.50 470 15.50 394 17.00 432 14 20.00x20.00 508X508

AW2024-1P 17.00 432 22.50 572 15.50 394 21.00 533 14 20.00x24.00 508X610

AW2416-1P 21.00 533 14.50 368 19.50 495 13.00 330 14 24.00x16.00 610X406

AW2420-1P 21.00 533 18.50 470 19.50 495 17.00 432 14 24.00x20.00 610X508

AW2424-1P 21.00 533 22.50 572 19.50 495 21.00 533 14 24.00x24.00 610X610

AW3020-1P 26.00 660 18.50 470 24.50 622 17.00 432 14 30.00x20.00 762X508

AW3024-1P 26.00 660 22.50 572 24.50 622 21.00 533 14 30.00x24.00 762X610

AW3030-1P 26.00 660 28.50 724 24.50 622 27.00 686 14 30.00x30.00 762X762

AW3624-1P 32.00 813 22.50 572 30.50 775 21.00 533 14 36.00x24.00 914X610

AW3630-1P 32.00 813 28.50 724 30.50 775 27.00 686 14 36.00x30.00 914X762

AW4224-1P 38.00 965 22.50 572 36.50 927 21.00 533 14 42.00x24.00 1067X610

NEMA flat panels can be installed in Type

4X, Type 4 and Type 12 NEMA Enclosures.

Panels are available in steel, galvanized

steel, stainless steel, and aluminum.

Painted steel panels have a white powder

paint finish. Stainless steel and aluminum

panels have a smooth brushed finish on

one side and protected with PVC film.

NEMA Flat Panels

B

A

(omit when enclosure height

is less than 30 inches)

(omit when enclosure width

is less than 30 inches)

.56 D hole

(14)

CL

CL

Type 1 medium enclosure panels can be installed in

Type 1 medium panel enclosures. Panels are only

available in steel and have a white powder paint finish.

Type 1 Medium Enclosure Panels

.75

(19)

.75

(19)

.88

(22)

.88

(22)

D

D

C

C

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

408 Eaton B-Line series electrical enclosures

Accessories

JIC Flat Perforated Panel Fits Enclosure

Catalog A B Height x Width

Number in. mm in. mm Gauge in. mm

AW64PP 4.87 124 2.87 73 16 6.00x4.00 152x102

AW66PP 4.87 124 4.87 124 16 6.00x6.00 152x152

AW86PP 6.87 174 4.87 124 16 8.00x6.00 203x152

AW88PP 6.87 174 6.87 174 16 8.00x8.00 203x203

AW108PP 8.87 225 6.87 174 16 10.00x8.00 254x203

AW1010PP 8.87 225 8.87 225 16 10.00x10.00 254x254

AW126PP 10.87 276 4.87 124 16 12.00x6.00 305x152

AW1210PP 10.87 276 8.87 225 16 12.00x10.00 305x254

AW1212PP 10.87 276 10.87 276 16 12.00x12.00 305x305

AW148PP 12.87 327 6.87 174 16 14.00x8.00 356x203

AW1412PP 12.87 327 10.87 276 16 14.00x12.00 356x305

AW1610PP 14.87 378 8.87 225 16 16.00x10.00 406x254

AW1614PP 14.87 378 12.87 327 16 16.00x14.00 406x356

Panels & Panel Accessories Discount Schedule: C2; A2

JIC & Small Enclosure Perforated Panels Subclass: DSG

Illustration Sheet and Catalog Number

JIC perforated panels can be installed

in all types of JIC Enclosures, and are

intended for mounting lightweight

components without drilling and tapping.

Small enclosure perforated panels can

be installed in small Type 3R RHC, and

small Type 1 Enclosures, and are

intended for mounting lightweight

components without drilling and tapping.

Small Enclosure Flat Perforated Panel Fits Enclosure

Catalog A B Height x Width

Number in. mm in. mm Gauge in. mm

N66PP 4.25 108 4.25 108 16 6.00x6.00 152x152

N86PP 6.25 159 4.25 108 16 8.00x6.00 203x152

N88PP 6.25 159 6.25 159 16 8.00x8.00 203x203

N108PP 8.25 210 6.25 159 16 10.00x8.00 254x203

N1010PP 8.25 210 8.25 210 16 10.00x10.00 254x254

N1210PP 10.25 260 8.25 210 16 12.00x10.00 305x254

N1212PP 10.25 260 10.25 260 16 12.00x12.00 305x305

N1412PP 12.25 360 10.25 260 16 14.00x12.00 356x305

N2012PP 18.25 463 10.25 260 16 20.00x12.00 508x305

Panels are available in steel and have a white powder paint finish.

Panels are available in steel and have a white powder paint finish.

60°

.25

(6)

.125

(3)

A

A

B

B

enclosure width -1.75

(44)

enclosure width -1.75 (44)

enclosure width -2.37

(60)

enclosure width -2.37 (60)

.31

(8)

.31

(8)

.31

(8)

.31

(8)

.25 Dia.

(6)

.25 Dia.

(6)

Catalog Description Typical Use Quantity Number

10168 #8-32 x .375 inch selt tap steel screw NEMA 1 & JIC performed panels 20

Hardware Packages

JIC Enclosure Perforated Panels Small Enclosure Perforated Panels

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

.25

(6)

Accessories

409 B-Line series electrical enclosures Eaton

Accessories

Panels & Panel Accessories Discount Schedule: C2

Medium Perforated Panels Subclass: DSG

Illustration Sheet and Catalog Number

B

D

A C

.56 Dia.

(14)

.75

(19)

.75

(19)

CL

(omit when enclosure width

is less than 30 inches)

CL

60°

.25

(6)

.25

(6)

.125

(3)

Type 1 Medium Enclosure Fits Enclosure

Flat Perforated Panel AB C D Height x Width

Catalog Number in. mm in. mm in. mm in. mm Gauge in. mm

AW1612-1PP 13.00 330 10.50 267 11.50 292 9.00 228 16 16.00x12.00 406X305

AW1616-1PP 13.00 330 14.50 368 11.50 292 13.00 330 16 16.00x16.00 406X406

AW1620-1PP 13.00 330 18.50 470 11.50 292 17.00 432 16 16.00x20.00 406X508

AW2016-1PP 17.00 432 14.50 368 15.50 394 13.00 330 16 20.00x16.00 508X406

AW2020-1PP 17.00 432 18.50 470 15.50 394 17.00 432 16 20.00x20.00 508X508

AW2024-1PP 17.00 432 22.50 572 15.50 394 21.00 533 16 20.00x24.00 508X610

AW2416-1PP 21.00 533 14.50 368 19.50 495 13.00 330 16 24.00x16.00 610X406

AW2420-1PP 21.00 533 18.50 470 19.50 495 17.00 432 16 24.00x20.00 610X508

AW2424-1PP 21.00 533 22.50 572 19.50 495 21.00 533 16 24.00x24.00 610X610

AW3020-1PP 26.00 660 18.50 470 24.50 622 17.00 432 16 30.00x20.00 762X508

AW3024-1PP 26.00 660 22.50 572 24.50 622 21.00 533 16 30.00x24.00 762X610

AW3030-1PP 26.00 660 28.50 724 24.50 622 27.00 686 16 30.00x30.00 762X762

AW3624-1PP 32.00 813 22.50 572 30.50 775 21.00 533 16 36.00x24.00 914X610

AW3630-1PP 32.00 813 28.50 724 30.50 775 27.00 686 16 36.00x30.00 914X762

AW4224-1PP 38.00 965 22.50 572 36.50 927 21.00 533 16 42.00x24.00 1067X610

Type 1 medium enclosure perforated panels can be installed in Type 1 Medium Panel

Enclosures. Panels are available in steel and have a white powder paint finish.

Type 1 Medium Enclosure Perforated Panels

Catalog Number Description Typical Use Quantity

10168 #8-32 x .375 inch selt tap steel screw NEMA 1 & JIC performed panels 20

Hardware Packages

(omit when enclosure

height is less than 30

inches) Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

410 Eaton B-Line series electrical enclosures

Accessories

Panels & Panel Accessories Discount Schedule: C2

NEMA Flanged Panels Subclass: DSB

Illustration Sheet and Catalog Number

NEMA Flanged Panel Catalog Number Fits Enclosure

Painted Galvanized A B Height x Width

Steel Steel Stainless Aluminum in. mm in. mm Gauge in. mm

AW2420P AW2420GP AW2420SP AW2420AP 20.87 530 16.87 428 12 24.00*x20.00* 610x508

AW2424P AW2424GP AW2424SP AW2424AP 20.87 530 20.87 530 12 24.00x24.00 610x610

AW3016P AW3016GP AW3016SP AW3016AP 26.87 682 12.87 327 12 30.00x16.00 762x406

AW3020P AW3020GP AW3020SP AW3020AP 26.87 682 16.87 428 12 30.00x20.00 762x508

AW3024P AW3024GP AW3024SP AW3024AP 26.87 682 20.87 530 12 30.00*x24.00* 762x610

AW3030P AW3030GP AW3030SP AW3030AP 26.87 682 26.87 682 12 30.00x30.00 762x762

AW3624P AW3624GP AW3624SP AW3624AP 32.87 835 20.87 530 12 36.00x24.00 914x610

AW3630P AW3630GP AW3630SP AW3630AP 32.87 835 26.87 682 12 36.00*x30.00* 914x762

AW3636P - AW3636SP - 32.87 835 32.87 835 12 36.00x36.00 914x914

AW4224P - -- 38.87 987 20.87 530 12 42.00*x24.00* 1067x610

AW4230P AW4230GP AW4230SP AW4230AP 38.87 987 26.87 682 12 42.00*x30.00* 1067x762

AW4236P AW4236GP AW4236SP AW4236AP 38.87 987 32.87 835 12 42.00x36.00 1067x914

AW4242P - -- 38.87 987 38.87 987 12 42.00x42.00 1067x1067

AW4824P - -- 44.87 1140 20.87 530 12 48.00*x24.00* 1219x610

AW4830P AW4830GP AW4830SP - 44.87 1140 26.87 682 12 48.00*x30.00* 1219x762

AW4836P AW4836GP AW4836SP AW4836AP 44.87 1140 32.87 835 12 48.00*x36.00* 1219x914

AW4842P AW4842GP AW4842SP AW4842AP 44.87 1140 38.87 987 12 48.00*x42.00* 1219x1067

AW4848P - -- 44.87 1140 44.87 1140 12 48.00x48.00 1219x1219

AW6030P - -- 56.87 1444 26.87 682 12 60.00*x30.00* 1524x762

AW6036P AW6036GP AW6036SP AW6036AP 56.87 1444 32.87 835 12 60.00*x36.00* 1524x914

AW7230P - -- 68.87 1749 26.87 682 12 72.00x30.00 1829x762

AW7236P - -- 68.87 1749 32.87 835 12 72.00x36.00 1829x914

B

A (omit when enclosure height

is less than 36 inches)

(omit when enclosure width

is less than 36 inches)

.56 D hole

(14)

.75

(19) .81

(20)

.81

(20)

* Panel also fits these enclosures when height and width dimensions are reversed.

NEMA Flanged Panels can be

installed in consoles, Type 4X,

Type 4, and Type 12 NEMA

Enclosures. Panels are available in

steel, galvanized steel, stainless

steel and aluminum. Painted steel

panels have a white powder paint

finish. Stainless steel and aluminum

panels have a smooth brushed

finish on one side and protected

with PVC film.

CL

CL

enclosure width -4.75

(121)

enclosure height -4.75 (121)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Accessories

411 B-Line series electrical enclosures Eaton

Accessories

Panels & Panel Accessories Discount Schedule: C2

Large NEMA Flanged Panels Subclass: DSC

Illustration Sheet and Catalog Number

Panel Catalog Number Fits Enclosure*

AB C Height x Width

Steel Stainless Aluminum in. mm in. mm in. mm Gauge in. mm

AW5442P - - 49.87 1267 37.87 962 - - 10 54.00x42.00 1372X1067

AW6042P --- 56.87 1444 38.87 987 12 60.00*x42.00* 1524x1067

AW6048P AW6048SP AW6048AP 55.87 1419 43.87 1114 - - 10 60.00x48.00 1524X1219

AW6060P AW6060SP AW6060AP 55.87 1419 55.87 1419 - - 10 60.00x60.00 1524X1524

AW7260P AW7260SP AW7260AP 67.87 1724 55.87 1419 22.06 560 10 72.00x60.00 1829X1524

AW7272P AW7272SP AW7272AP 67.87 1724 67.87 1724 22.06 560 10 72.00x72.00 1829X1829

B

A C enclosure height -5.75 (146)

enclosure width -5.75

(146)

(omit when enclosure

height is 72 inches)

add when enclosure

height is 72 inches

add when enclosure

height is 72 inches

.56 D Hole

(14)

.75

(19) .81

(20)

.81

(20)

*Panel also fits Type 4X and Type 4 where the height is 2.00 inches more than shown in the table

Large Flanged Panels can be installed in Floor Standing Type 4X, Type 4 and Type 12 Enclosures. Handle Kits

are furnished with each panel. Steel panels have a white powder paint finish. Stainless steel and aluminum

panels have a smooth brushed finish on one side and protected with PVC film.

CL

CL

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

412 Eaton B-Line series electrical enclosures

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Panels & Panel Accessories

Wood Back Panels Discount Schedule: A2

Illustration Sheet and Catalog Number Subclass: AQ0

Wood Back Board Fits Enclosure

A B Height x Width

Catalog Number in. mm in. mm in. mm

88 WB 5.00 127 5.00 127 8.00x8.00 203x203

1010 WB 7.00 178 7.00 178 10.00x10.00 254x254

128 WB 9.00 229 5.00 127 12.00x8.00 350x203

1210 WB 9.00 229 7.00 178 12.00x10.00 305x254

1212 WB 9.00 229 9.00 229 12.00x12.00 305x305

1612 WB 13.00 330 9.00 229 16.00x12.00 406x305

1812 WB 15.00 381 9.00 229 18.00x12.00 457x305

1815 WB 15.00 381 12.00 305 18.00x15.00 457x381

1818 WB 15.00 381 15.00 381 18.00x18.00 457x457

2412 WB 21.00 533 9.00 229 24.00x12.00 610x305

2418 WB 21.00 533 15.00 381 24.00x18.00 610x457

2424 WB 21.00 533 21.00 533 24.00x24.00 610x610

3015 WB 27.00 686 12.00 305 30.00x15.00 762x381

3018 WB 27.00 686 15.00 381 30.00x18.00 762x457

3024 WB 27.00 686 21.00 533 30.00x24.00 762x610

3030 WB 27.00 686 27.00 686 30.00x30.00 762x762

3624 WB 33.00 838 21.00 533 36.00x24.00 914x610

3630 WB 33.00 838 27.00 686 36.00x30.00 914x762

3636 WB 33.00 838 33.00 838 36.00x36.00 914x914

4824 WB 45.00 1143 21.00 533 48.00x24.00 1219x610

4836 WB 45.00 1143 33.00 838 48.00x36.00 1219x914

4848 WB 45.00 1143 45.00 1143 48.00x48.00 1219x1219

B

A

.75

(19)

Wood back boards are intended for Type 1 and Type 3R Telephone Termination Cabinets. However, they may be

installed in any enclosure that will accommodate the board size. Standard boards are cut from shop grade type CDX

plywood with one side finished smooth. Boards normally are not treated or painted. Consult the factory for special cuts,

holes, finishes or wood treating.

Accessories

413 B-Line series electrical enclosures Eaton

Accessories

Panels & Panel Accessories

JIC Swing Panels

Illustration Sheet and Catalog Number

Catalog Number Description

For use with JIC Enclosures that are 8.00 (203 mm)

JICSPK x 6.00 (152 mm) inches or larger. The distributed

weight of panel and equipment should not exceed

25 pounds.

This kit offers a means for mounting user’s components and equipment

near the front of an enclosure opening for easy access. The JIC Swing

Panel Kit includes two hinge brackets, two fastening brackets, knurled

thumb screws, retaining hardware and instructions for installing standard

panels. Panels must be ordered separately.

Discount Schedule: C2

Subclass: DS0

Front View

(without cover)

Panel Fastening Detail Panel Hinge Detail

enclosure width -1.75

(44)

enclosure height -1.75 (44)

fasteningbracket

hinge bracket

hinge

(w/o cover)

thumb screw

panel

(order separately)

fastening bracket

X X

hinge

bracket

clamp

bracket

(w/o clip)

X=.62 (16) Min. for all JIC Enclosures Except Quick Release type.

X= 1.37 (35) min. for JIC Quick-Release type.

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

414 Eaton B-Line series electrical enclosures

Accessories

Panels & Panel Accessories

NEMA Swing Panels

Illustration Sheet and Catalog Number

Catalog Number Description

For use with Type 4, Type 4X, and Type 12 Single

Door Enclosures 16.00 (406 mm) x 12.00 (305 mm)

NSPK and larger, provided the distributed weight of panel

and equipment does not exceed 100 pounds. Also

used on the Larger Type 12 CHSC and Larger Type

3R RHC Enclosure.

Front View

(without door)

Panel Fastening Detail

Panel Hinge Detail

enclosure width -4.75

(121)

enclosure height -4.75 (121)

fastening bracket

hinge bracket

thumb screw

see fastening detail see hinge detail

fastening bracket

Y

X

hinge bracket

clamp

bracket

(w/o clip)

This kit offers a means for mounting user components and equipment near

the front of an enclosure opening for easy access. The NEMA Swing Panel

Kit includes two hinge brackets, two fastening brackets, knurled thumb

screws, retaining hardware, bracket mounting hardware and instructions for

installing standard panels. Panels must be ordered separately.

Discount Schedule: C2

Subclass: DS0

X= 1.37 (35) min. Type 4, Type 4X, & Type 12 Single door, and Large Type 3R

RHC Enclosures

Y= 1.25 (32) min. Type 4, Type 4X, & Type 12 Single door, and Large Type 3R

RHC Enclosures

X= 1.00 (25) min. Large Type 12 CHSC Enclosures

Y= .87 (22) min. Large Type 12 CHSC Enclosures

hinge

(w/o door)

Notes: Large Type 12 CHSC Enclosures have back panels installed. Dimensions are in inches. Millimeters shown are for reference only.

Data subject to change without notice.

Accessories

415 B-Line series electrical enclosures Eaton

Accessories

Panels & Panel Accessories

Illustration Sheet and Catalog Number Discount Schedule: C2

Subclass: DS0

Panel Support Kits

Catalog Number Description

PS3 For use on Single Door and Double-Door

Floor-Standing Enclosure Panels

PS9 For use on Free-Standing and Multi-Door

Free-Standing Enclosure Panels

Panel Lifting Hooks

Catalog Number Description

PLH Panel lifting hooks

Designed to provide additional support to panels which are burdened with

heavy equipment. Supports fit over the bottom corner collar Studs. Each

support bracket can be adjusted so that the load can be shared between the

support and the stud. A “jam” nut maintains the adjustment. At the base of

the support bracket is a nylon shoe to prevent damage to the interior finish.

Two support brackets assemblies are furnished with each kit.

Two (2) Panel lifting hooks are used for picking up and

moving large panels. The hooks are designed to be

used on back panels while laying flat. Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

416 Eaton B-Line series electrical enclosures

Accessories

Lifting Hooks

Panel Supports

Frameless Window Kits

Window Size Enclosure cut-out (max)

Catalog Number in. mm in. mm

FLWK52 6.00 x 3.00 152 x 76 5.00 x 2.00 127 x 51

FLWK96 10.00 x 7.00 254 x 178 9.00 x 6.00 229 x 152

FLWK133 14.00 x 4.00 356 x 102 13.00 x 3.00 330 x 76

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Window Kits

Fixed Window Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Framed Window Kits Frame Detail Window Detail Enclosure

Catalog Number A B CD Cut-Out

Steel Stainless in. mm in. mm in. mm in. mm in. mm

PWK53 PWK53SS 7.50 191 5.50 140 5.00 127 3.00 76 6.62x4.62 168x117

PWK95 PWK95SS 11.50 292 8.00 203 9.00 229 5.50 140 10.62x7.12 270x181

PWK133 PWK133SS 15.50 394 5.50 140 13.00 330 3.00 76 14.62x4.62 371x117

PWK138 PWK138SS 15.50 394 10.50 267 13.00 330 8.00 203 14.62x9.62 371x244

PWK175 PWK175SS 19.50 495 8.00 203 17.00 432 5.50 140 18.62x7.12 473x181

PWK1711 PWK1711SS 19.50 495 13.50 343 17.00 432 11.00 279 18.62x12.62 473x321

PWK2315 PWK2315SS 25.50 648 17.50 445 23.00 584 15.00 381 24.62x16.62 625x422

PWK2919 PWK2919SS 31.50 800 21.50 546 29.00 737 19.00 483 30.62x20.62 778x524

PWK3523 PWK3523SS 37.50 953 25.50 648 35.00 889 23.00 584 36.62x24.62 930x625

Steel Framed Window Kits are designed for use with Type 4 and

Type 12 Enclosures. Stainless Steel Framed Window Kits are for

use with Type 4X Enclosures, however, they can also be used on

Type 4 and Type 12, if additional corrosion protection is needed.

Steel kits are constructed from heavy gauge and have an ANSI 61

gray polyester powder finish. Stainless steel kits are constructed

from Type 304 stainless and have a brushed finish. Each kit

includes a .25 inch (6 mm) thick polycarbonate window and

gasket to ensure a tight, oil and water-resistant seal around the

enclosure cut-out. Hardware and instructions for field installation

are also furnished. UL Listed.

B

C

D

A

.31

(8)

.62

(16)

gasket

window

frame

retaining

hardware

Frameless Window Kits are intended for use with

Type 1 and Type 12 Enclosures. Each kit includes a

roll of .50 inch (13 mm) wide double-sided adhesive

tape and a .12 inch (3 mm) thick polycarbonate

window. Instructions for mounting and hardware are

also furnished. UL listed.

Accessories

417 B-Line series electrical enclosures Eaton

Accessories

Window & Door Kit Accessories

Illustration Sheet and Catalog Number Discount Schedule: C2

Subclass: DS0

Framed Window Kits Frame Detail Window Detail Enclosure

Height Width Height Width Cut-Out

Catalog Number in. mm in. mm in. mm in. mm in. mm

HWK1212 12.50 318 12.50 318 10.12 257 10.12 257 11.87x11.87 301x301

HWK1612 16.50 419 12.50 318 14.12 359 10.12 257 15.87x11.87 403x301

HWK2016 20.50 521 16.50 419 18.12 460 14.12 359 19.87x15.87 505x403

HWK2020 20.50 521 20.50 521 18.12 460 18.12 460 19.87x19.87 505x505

HWK2420 24.50 622 20.50 521 22.12 562 18.12 460 23.87x19.87 606x505

HWK3024 30.50 775 24.50 622 28.12 714 22.12 562 29.87x23.87 759x606

Provides a clear view to components mounted inside an enclosure. The window is

made of .21-inch thick polycarbonate. All mounting hardware is provided for easy

installation. Gasketing along all edges maintains the Type 12 rating. Finished in

ANSI 61 gray polyester powder. UL Listed.

Door Stops

Hinged Windows

Print Pockets

Door Stop Kit

Catalog Number Description

DSTOPK Door stop kit

Door Stop Kits are intended for most Type 4, Type 4X, and Type 12

Single Door Wall-Mount Enclosures that have a minimum width of

16 inches. The kit is designed to mount at the top or bottom of the

door opening. When properly installed the door can be held open

approximately 135˚

. Tools are not necessary to affix or release the stop.

When not in use the assembly folds and locks neatly away. Each kit

contains detailed mounting instructions and all the necessary hardware

for field assembly.

Print Pockets

Catalog Number Length x Width

in. mm

32170 6”x 6” 152x152

32171 10”x10” 254x254

32172 9”x12” 229x305

Print pockets provide a convenient place to store operation manuals,

diagrams, or other documents inside the enclosure. Thermoplastic

pockets are gray and have cut away areas for viewing contents.

Pockets have adhesive backing for mounting inside on enclosure door.

Accessories

Front Side

Back Side

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

418 Eaton B-Line series electrical enclosures

Accessories

Locks, Latches, Inserts, & Handles

Flush Locks Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Type 1 Panel Enclosure Flush Lock

Type 1 Enclosure Flush Lock

Catalog Number Description

T1EFL New Flush lock

Flush Locks are used as a keyed locking mechanism for Type 1

small, medium and large Panel Enclosures. Mechanisms are

steel with a plated finish.

.886 dia.

(22)

.791

Typ.

(20)

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Accessories

Hole Pattern Detail

Hole Pattern Detail

X

(inside edge of door)

DD Punch

.75

(19)

.625

(16)

Hole Pattern Detail

(inside edge of door)

DD Punch

.75

(19)

.625

(16)

Type 4 & 12 NEMA Enclosure Flush Locks

NEMA 4 & 12 Flush Lock

Catalog Number Description

25351 A NEMA 4 & 12 flush lock

Flush lock is intended for 1-pt field modification to

most Type 4 and Type 12 Single Door Wall-Mount

Enclosures. Included is detail instructions for the

door hole size and location (see detail at right).

The lock is steel with a bright plated finish.

1.81

(47)

X = 1.18 (30) JIC Enclosure

X = 1.68 (43) Large Type 12 CHSC

Enclosure

JIC 4 & 12 Flush Lock

Catalog Number Description

25352 A JIC 4 & 12 flush lock

Flush Locks are intended for 1-pt field

modifications to most Type 4 and 12 JIC

Enclosures as well as the Large Type 12

CHSC Enclosures. Included is detail

instructions for the door hole size and

location (see detail at right). The lock is steel

with a bright plated finish.

Type 4 & Type 12 JIC Enclosure Flush Lock

419 B-Line series electrical enclosures Eaton

Accessories

Locks, Latches, Inserts, & Handles

Inserts Discount Schedule: C2

Illustration Sheet and Catalog Number

Accessories

Type 1 Panel Enclosure Security Inserts

Security latch inserts interchange with slotted quarter-turn

flush latch and provide security and control access to

interior of enclosure. Inserts include matching key.

Type 1 Enclosure Security Latch Inserts

Catalog Number Description

7MT1TLK 7mm triangular latch insert

7MT1SLK 7mm square latch insert

3MT1DBLK 3mm double bit latch insert

7MT1TLK 7MT1SLK

3MT1DBLK

Type 4 Premier Enclosure Security Inserts

Security latch inserts interchange with slotted quarter-turn

flush latch and provide security and control access to

interior of enclosure. Inserts include matching key.

Type 4 Premierv Enclosure Security Latch Inserts

Catalog Number Description

7MTLK 7mm triangular latch insert

7MSLK 7mm square latch insert

3MDBLK 3mm double bit latch insert

3MDBLK

7MTLK

7MSLK

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

420 Eaton B-Line series electrical enclosures

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Locks, Latches, Inserts, & Handles

Latches & Locks Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0, 0A0 *

Accessories

Type 4 & Type 12 Security Latch Kits

A = Chrome Plate

Intended to be used on Type 4 and Type 12/13 enclosures which

utilize external screw clamps. Latches require a hole punched or

drilled in the door for installation. Once installed, an internal O-ring

and external gasket maintain a dust-tight and water-tight seal. The

tamper resistant latches require specific keys to gain access.

Latch Kits for Type 4 & 12 Enclosures

Catalog Number Description

25270 A Slotted flush latch

25278 A Triangle flush latch key

25277 A * Triangle flush latch

25289 A * Square flush latch key

25288 A Square flush latch

25270A

25277A

25288A

25278 A

25289A

Type 1 Single-Door Telephone Cabinet Tumbler Locks

Type 1 Tel Cab Mechanism

Catalog Number Description

25092 A For right hand hinged single door cabinet

25092 B For left hand hinged single door cabinet

Tumbler Locks are used as replacement mechanisms for Type 1

Single-Door Telephone Termination Cabinets. The low profile

mechanism is excellent for surface and flush cabinet cover

mounting.

25092A

25092B

421 B-Line series electrical enclosures Eaton

Accessories

Locks, Latches, Inserts, & Handles

Locks & Latches Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Type 1 & Type 12 Quarter-Turn Enclosure Locks

Type 4 Quarter-Turn Enclosure Locks & Latches for JIC & Ground Mount

Accessories

T1KLBM & T12KLB

T4WNBM & T4WNB

Type 1 & Type 12

Catalog Number Description Used With

T1KLBM Type 1 - Small Locking - Black/Stainless Steel JIC

T12KLB Type 12 - Large Locking - Black/Stainless Steel Ground Mount

T4DLBM & T4LDLB

Type 4

Catalog Number Description Used With

T4DLBM Type 4 - Small Slotted Latch - Black Fnish JIC

T4LDLB Type 4 - Large Slotted Latch - Black Fnish Ground Mount

Type 4

Catalog Number Description Used With

T4WNBM Type 4 - Small Wing Knob - Black Fnish JIC

T4WNB Type 4 - Large Wing Knob - Black Fnish Ground Mount

T4KLWNB

T4KLWNBM

Type 4

Catalog Number Description Used With

T4KLWNBM Type 4 - Small Keylocking Wing Knob - Black Fnish JIC

Type 4

Catalog Number Description Used With

T4KLWNB Type 4 - Large Keylocking Wing Knob - Black Fnish Ground Mount

T4PLWNB

Type 4

Catalog Number Description Used With

T4PLWNB Type 4 - Large Padlockable Wing Knob - Black Fnish Ground Mount

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

422 Eaton B-Line series electrical enclosures

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Locks, Latches, Inserts, & Handles

Locks, Latches, & Inserts Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Type 4 Quarter-Turn Enclosure Locks, Latches, & Inserts

Type 4X Quarter-Turn Enclosure Latch

Accessories

Type 4X

Catalog Number Description Used With

T4XDLSSM Type 4X - Small Slotted Latch - Stainless Steel JIC

T4XLDLSS Type 4X - Large Slotted Latch - Stainless Steel Ground Mount

T4XDLSSM & T4XLDLSS

7MT4SLKB & 6MT4SLKBM

7MT4TLKB & 6.5MT4TLKBM

Type 4

Catalog Number Description Used With

7MT4TLKB Type 4 - Large Security Insert (7mm Triangle) - Black Fnish Ground Mount

6.5MT4TLKBM Type 4 - Small Security Insert (6.5mm Triangle) - Black Fnish JIC

Type 4

Catalog Number Description Used With

7MT4SLKB Type 4 - Large Security Insert (7mm Square) - Black Fnish Ground Mount

6MT4SLKBM Type 4 - Small Security Insert (6mm Square) - Black Fnish JIC

T4KLTHB

T4THB

Type 4

Catalog Number Description Used With

T4THB Type 4 - Large T-Handle Non-Locking - Black Fnish Ground Mount

Type 4

Catalog Number Description Used With

T4KLTHB Type 4 - Large T-Handle Key-Locking - Black Fnish Ground Mount

4MT4HXLKBM

3MT4DBLKB

Type 4

Catalog Number Description Used With

3MT4DBLKB Type 4 - Large Security Insert 3mm Double Bit) - Black Fnish Ground Mount

Type 4

Catalog Number Description Used With

4MT4HXLKBM Type 4 - Small Security Insert (4mm Socket Hex) - Black Fnish JIC

423 B-Line series electrical enclosures Eaton

Accessories

Locks, Latches, Inserts, & Handles

T-Handles

Illustration Sheet and Catalog Number

Accessories

Type 3R Double-Door Enclosure Padlock Handle

Type 1 & 3R Double-Door Telephone Cabinet T-Handle Lock

Type 1 & 3R T-Handle Lock

Catalog Number Description

25421 A T-handle lock

Type 3R Padlock Handle

Catalog Number Description

25350 A Type 3R padlock handle

T-Handle Lock is intended to be used as a replacement mechanism

for Type 1 Double Door Telephone Termination Cabinets, Type 3R

Telephone Termination Cabinets. The handle is designed to fit doors

that hinge on either the left or right side. Cam and adjustable

hardware can be rotated accordingly. The lock is steel with a bright

plated finish.

Discount Schedule: C2

Subclass: AS0

Type 3R Padlock Handle is intended to be used as a replacement

mechanism for Type 3R Double-Door Enclosures. It is designed to fit

existing 3-pt locking rod and cam assembly. The handle is steel with a

bright plated finish.

Discount Schedule: C2

Subclass: DS0

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

424 Eaton B-Line series electrical enclosures

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Locks, Latches, Inserts, & Handles

Inserts

Illustration Sheet and Catalog Number

Accessories

Wall-Mount Handles

Padlocking, key-locking or non-locking handles are interchangeable with

standard slotted quarter-turn flush latch on Premier series enclosures.

Available keyed alike or keyed different, please specify when ordering.

Discount Schedule: C2

Subclass: TD0

Type 4 & 12 Premier Enclosure Handle Inserts

WMHNL

non-locking

WMHK-01 thru WMHK-04

key-lockable

WMHPTO

padlockable

SD-KHB

key-lockable

425 B-Line series electrical enclosures Eaton

Accessories

Catalog Latch

Number Description Type

WMHNL Wall-mount handle, non-locking Single point

WMHK-01 Wall-mount handle, key-locking - keyed 01 Single point

WMHK-02 Wall-mount handle, key-locking - keyed 02 Single point

WMHK-03 Wall-mount handle, key-locking - keyed 03 Single point

WMHK-04 Wall-mount handle, key-locking - keyed 04 Single point

WMHPTO Wall-mount handle, padlockable Single point

SD-KHB Black die cast zinc, key-locking handle 3-point

See hole pattern detail for field mounting the handle assembly.

The handle is steel with a bright plated finish.

Discount Schedule: C2 Subclass: DS0

Catalog Number Description

25345 A NEMA 12 - 1 pt padlocking

Catalog Number Description

25345 A** NEMA 12 - 3 pt padlocking

** Specify enclosure height after the catalog number, (20, 24,

30, 36, 42, 48, 60, 72). Example: 25345 A48 for 48 inch

height.

NEMA 12 Padlock Handle Kits are intended for 3-pt field

modification to most Type 12 Single Door Wall-Mount

Enclosures with a standard height from 20 inches (508 mm) to

72 inches (1829 mm). The handle is heavy-duty and will rotate

in both the counter-clockwise and clockwise directions. Below

handle center is a padlock provision with holes large enough to

accommodate up to a .43 inch (11 mm) shaft. Kits include a

handle, cam, rods, spacer, rollers, adjustable rod guides and all

the hardware necessary for assembly. Adjustable rod guides

have multiple settings for desired gasket compression. Detailed

instructions are also furnished which include a door hole

pattern for field mounting the handle assembly (see detail 2 on

this page). The handle is steel with a bright plated finish.

Discount Schedule: C2 Subclass: DS0

2.25

(57)

(of door)

A = .20 (5) D hole

B = .60 (15) D hole

A

A

A

A

.75

(19) .75

(19)

.75

(19)

1.12

(28)

1.12

(28)

B

Hole Pattern Detail

(inside edge of door)

CL

25345A36 shown

25345A

Type 12 NEMA Single-Door Enclosure Padlock Handle Kits

Type 12 NEMA Single-Door Enclosure Padlock Handle Kits

Locks, Latches, Inserts, & Handles

Handles

Illustration Sheet and Catalog Number

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

426 Eaton B-Line series electrical enclosures

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Locks, Latches, Inserts, & Handles

Handles

Illustration Sheet and Catalog Number

Accessories

427 B-Line series electrical enclosures Eaton

Accessories

Type 12 Console Handle Kits

Catalog Number Description

25228 A Type 12 handle CCW lock

25228 B Type 12 handle CCW latch

25228 C Type 12 handle CW lock

25228 D Type 12 handle CW latch

Type 12 Door Handles can be used as a replacement lock or latch for Type

12 Consoles. These enclosures use a clockwise (CW) handle rotation,

counter-clockwise (CCW) lock and latch are available.

Handles are steel with a bright plated finish.

See hole pattern detail for field mounting the handle assembly.

Handles are steel with a bright plated finish.

Discount Schedule: C2 Subclass: DS0

2.25

(57)

(of door)

A = .21 (5) D hole

B = .81 (21) D hole

A

A

.90

(23) 1.81

(46)

B

Hole Pattern Detail

(inside edge of door)

CL

Padlocking Defeater Handle Kit

Catalog Number Description

BD-PDHB Type 4 - 1 pt padlocking defeater

These door handles can be used as replacement locks for Type 12

ground mounted disconnect enclosures featuring a beveled door.

Handles are a zinc die-cast construction with a textured powder

coat finish to provide durability and corrosion resistance. An optional

built in spring loaded defeater provides a two handed operation

requirement and a standard padlockable hangle trigger provides

secondary security. Handles are supplied with nut and gasketing

materials.

Discount Schedule: C2

Subclass: DS0

Hole Pattern Detail

.791

(20.1)

Square

1.417

(36.0)

.885

(22.5)

Diameter

.334

(8.5)

Diameter

Locks, Latches, Inserts, & Handles

Handles

Illustration Sheet and Catalog Number

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

428 Eaton B-Line series electrical enclosures

Accessories

Padlocking Keylocking Handle Kit

Catalog Number Description

BD-PKHB Type 4X - 1 pt padlocking keylocking

These door handles can be used as replacement locks for Type 12,

Type 4 and Type 4X ground mounted enclosures featuring a beveled

door. Handles are a zinc die-cast construction with a textured powder

coat finish to provide durability and corrosion resistance. A key-lock

and padlockable hangle trigger provides secondary security.

Handles are supplied with nut and gasketing materials and keys.

Discount Schedule: C2

Subclass: DS0

Hole Pattern Detail

.791

(20.1)

Square

1.417

(36.0)

.885

(22.5)

Diameter

.334

(8.5)

Diameter

Padlocking Keylocking Handle Kit

Catalog Number Description

BD-PKHSS Type 4X - 1 pt padlocking keylocking

These door handles can be used as replacement locks for Type 4X

ground mounted 316SS enclosures featuring a beveled door. Handles

are a die-cast stainless steel construction to provide durability and

corrosion resistance. A key-lock and padlockable hangle trigger

provides secondary security.

Handles are supplied with nut and gasketing materials and keys.

Discount Schedule: C2

Subclass: DS0

Hole Pattern Detail

.791

(20.1)

Square

1.417

(36.0)

.885

(22.5)

Diameter

.334

(8.5)

Diameter

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Accessories

429 B-Line series electrical enclosures Eaton

Accessories

JIC Padlock Kit

JIC Padlock Kit

Catalog Number Description

PLKJICSS6 Padlock Kit Type 316 Stainless Steel

The JIC Padlock Kit is designed to field install on all JIC type

and Larger Type 12 CHSC Enclosures. Mounting hardware

and instruction are provided.

Discount Schedule: C2

Subclass: D10

Clamp & Padlock Kits

Padlock Kit

Illustration Sheet and Catalog Number

Accessories

Type 12 JIC Cover Clamp Kit

Type 4X/4 JIC Cover Clamp Kit

Type 4X/4/12 JIC Fast-Access Clamp Kit

This kit is intended to be used in place of standard JIC cover clamps to

provide quick access into an enclosure. Clamps will fit JIC Type 4X, 4 and 12

hinge and clamp cover enclosures. They will also replace the clamps used on

NEMA 12 and 4X Feed-Through Wireway and NEMA 12 and 4X Wiring

Trough. These clamps will not fit the JIC screw or quick-release cover

designs. Each kit includes washers for fitting between the enclosure bracket

and the fast-access clamp to control gasket compression. Kits are available in

plated steel (Type 12 Enclosures) and stainless steel (Type 4X & 4

Enclosures). UL Listed.

This kit is intended as replacement clamp parts on all JIC Type 12 hinge

cover and clamp cover devices. Clamps will also fit NEMA 12 Feed-Through

Wireway and NEMA 12 Wiring Trough. Each kit contains two each - plated

steel cover clamps and plated screws.

1/4” hardware.

This kit is intended as replacement clamp parts on all JIC Type 4X and JIC

Type 4 Wall-Mount and Floor-Standing Enclosures. Each kit contains two

each - stainless steel cover clamps stainless steel screws.

1/4” hardware.

JIC 12 Cover Clamp Kit

Catalog Number Description Quantity

J12CK2 Cover clamp kit 1 Kit

JIC 4 & 4X Cover Clamp Kit

Catalog Number Description Quantity

J4XCK2 Cover clamp kit 1 Kit

JIC Fast-Access Clamp Kit

Catalog Number Description Quantity

L23 Fast-clamp, steel 1

L23SS Fast-clamp, stainless 1

L23

L23SS

Clamp & Padlock Kits

Clamps Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

430 Eaton B-Line series electrical enclosures

Accessories

Accessories

Type 12 Door Clamp Kit

Catalog Number Description Quantity

N12CK2 Door clamp kit 1 Kit

Type 4 & 4X Door Clamp Kit

Catalog Number Description Quantity

N4XCK2 Door clamp kit 1 Kit

NEMA Fast-Access Clamp Kit

Catalog Number Description Quantity

FC412SS Fast-clamp, stainless steel 1 Kit

This kit is intended to be used in place of standard NEMA door clamps to

provide quick access into an enclosure. Clamps will fit Type 4X, 4 and 12

Single Door Wall-Mount Enclosures. They will also replace the clamps used

on Type 4X and Type 4 Floor Standing Enclosures. Each kit contains two

each - door clamps, fast access screw fasteners, springs and washers.

Gasket compression is controlled by turning the handle in or out of the

bracket. UL Listed.

This kit is intended as replacement clamp parts on Type 12 Single Door

Wall-Mount Enclosures. Each kit contains two each - door clamps, screws,

springs and washers. The clamps, screws and washers are plated steel,

the springs are stainless steel.

1/4” hardware.

This kit is intended as replacement clamp parts on Type 4X and Type 4

Wall-Mount and Floor Standing Enclosures. Each kit contains two each - door

clamps, screws, springs and washers. All clamp parts and hardware are

stainless steel.

1/4” hardware.

Type 12 NEMA Cover Clamp Kit

Type 4X/4 NEMA Cover Clamp Kit

Type 4X/4/12 NEMA Fast-Access Clamp Kit

Clamp & Padlock Kits

Clamps Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

431 B-Line series electrical enclosures Eaton

Accessories

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

432 Eaton B-Line series electrical enclosures

Accessories

Folding Shelf Kit

Catalog Number Description

FSHELF12 12 x 12 Flat mounting surface

FSHELF18 18 x 18 Flat mounting surface

The folding shelf is intended to mount inside or outside of enclosure to

support components, sensitive instruments and other equipment which

may be integral to the enclosure. When properly installed the shelf will

fold open into a locked position perpendicular to the mounting surface.

When not in use, the shelf folds down into a locked position. The

Folding Shelf is constructed from heavy gauge steel and has a white

polyester powder paint finish.

Gland Plates

Bolt-On Accessories

Illustration Sheet and Catalog Number Discount Schedule: C2

Subclass: DS0

Folding Shelf Kit

Catalog Number Gland Plate Detail Enclosure Cut-Out

A B

in. mm in. mm in. mm

GP610 6.00 152 10.00 254 5.00x9.00 127x229

GP618 6.00 152 18.00 457 5.00x17.00 127x432

Intended for use with Type 12 Enclosures and is an

excellent means of providing a removable access plate to

an enclosure and still maintain its listing. The Gland Plate is

constructed from (16) gauge steel and has ANSI 61 gray

polyester powder finish. Fastening is done from the inside

of the enclosure to prevent tampering. Hardware and

instructions are included with the kit. UL Listed.

.75 min

(19) enclosure back

1.00 min.

(25)

B

A

Enclosure Cut-Out

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

433 B-Line series electrical enclosures Eaton

Accessories

Bolt-On Accessories

Illustration Sheet and Catalog Number Discount Schedule: C2

Subclass: DS0

Floor Stand Kit

Enclosure Stabilizer

Floor Stand Kits

Catalog Number

AB C

Steel Stainless in. mm in. mm in. mm

MFK8 MFK8XS 8.0 203 6.06 154 - -

MFK10 MFK10XS 10.0 254 8.06 205 - -

MFK12 MFK12XS 12.0 305 10.06 256 - -

MFK16 MFK16XS 16.0 406 14.06 357 - -

MFK18 MFK18XS 18.0 457 16.06 408 7.00 178

MFK20 MFK20XS 20.0 508 18.06 459 8.00 203

MFK24 MFK24XS 24.0 610 22.06 560 10.00 254

Enclosure Stabilizer

Catalog Number Quantity

ES2 2

Floor Stand Kits are intended for use with Type 4X, Type 4 and Type

12 Wall-Mount Enclosures where floor support is required. They are

easily installed on most enclosures where the width is 20 inches (508

mm) or more. The enclosure mounting feet need not be removed in

order to install Floor Stand Kits. Each kit consists of two (10) gauge

legs and hardware for mounting. At the base of each leg is a prepunched plate (see drawing). Steel kits have a gray polyester powder

paint finish. Stainless steel kits are fabricated from 304 alloy.

Standard Floor Stand Kits are 12 inches (305 mm) high. For special

heights or non-standard construction consult the factory.

Enclosure Stabilizers are heavy gauge with a wide base for

use with NEMA Floor Stand Kits which add stability to large

enclosures or top heavy enclosures. Two thumb screws

thread into the offset piece and secure the stabilizer to the

base of the leg. Two stabilizers are furnished. They are

finished with a bright caution orange enamel paint.

4.62

(117)

.50 D hole

(13)

.50 D hole

(13)

4.62

(117)

9.87

(251)

7.87

(200)

7.87

(200)

7.87

(200)

A

A B

B

12.00

(305)

C

Base 20 - 24 Deep Base 8 - 16 Deep Floor Stand Kit

CL

Steel Stainless

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

434 Eaton B-Line series electrical enclosures

Accessories

Louver Plate Kits

Louver Louver Plate Size Louver Plate Detail Enclosure Cut-Out Area

Plate Kit

A B CDE Depth Quantity Height Width Opening

Catalog Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm (sq.in.)

LPK23 3.25 83 3.25 83 2.50 64 2.50 64 2.00 51 .25 6 3 2.12 54 2.12 54 1.10

LPK33 3.87 98 4.50 114 3.12 79 3.75 95 3.00 76 .25 6 3 2.50 64 3.12 79 1.68

LPK34 4.75 121 4.50 114 4.00 102 3.75 95 3.00 76 .25 6 4 3.37 86 3.12 79 2.20

LPK43 4.50 114 5.50 140 3.75 95 4.75 121 4.25 121 .25 6 3 3.00 76 4.12 105 2.30

LPK44 5.62 143 5.50 140 4.87 124 4.75 121 4.25 121 .25 6 4 4.00 102 4.12 105 3.10

LPK64 5.62 143 7.50 191 4.87 124 6.75 171 5.50 140 .25 6 4 4.25 121 6.12 155 4.10

LPK66 7.87 200 7.50 191 7.12 181 6.75 171 5.50 140 .25 6 6 6.50 165 6.12 155 6.10

LPK84 5.81 148 10.50 267 5.06 129 8.75 222 4.25 108 .25 6 8 4.25 121 8.12 206 6.30

LPK86 8.19 208 10.50 267 7.44 189 8.75 222 4.25 108 .25 6 12 6.50 165 8.12 206 9.50

LPK88 10.56 268 10.50 267 9.81 249 8.75 222 4.25 108 .25 6 16 8.75 222 8.12 206 12.70

LPK812 15.31 389 10.50 267 14.56 370 8.75 222 4.25 108 .25 6 24 13.25 337 8.12 206 19.00

Excellent for providing ventilation in enclosures where

external conditions or internal components may cause

excessive amount of heat or moisture. Designed to be used

with B-Line series Filter Kits using the same cut-out and

mounting hole configurations. Louver Plate Kits include all of

the necessary hardware and instructions for field installation.

Plates are constructed from 16 gauge steel and have an

ANSI 61 gray polyester powder finish.

Discount Schedule: C2

Subclass: DS0

B

D

A C

E

.87

(22)

.37

(9)

.21 D hole

(5)

(omit center

holes when

less than (12)

louvers)

CL

LPK84 to LPK812

Typical

LPK23 to LPK66

Typical

B

D

A

C

E

.37 (9)

.37

(9)

.21 D hole

(5)

(omit center holes

when less than (6)

louvers)

CL

Bolt-On Accessories

Illustration Sheet and Catalog Number