Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

435 B-Line series electrical enclosures Eaton

Accessories

Bolt-On Accessories

Illustration Sheet and Catalog Number Discount Schedule: C2

Subclass: DS0

Filters

Filter Used with

Louver Plate

Catalog Number Catalog Number

FLT33 LPK33

FLT34 LPK34

FLT43 LPK43

FLT44 LPK44

FLT64 LPK64

FLT66 LPK66

FLT84 LPK84

FLT86 LPK86

FLT88 LPK88

FLT812 LPK812

Designed for use with Louver Plate Kits. The Filter mounts securely inside of the

enclosure using the brackets and hardware furnished with the kit. The Filter is

comprised of finely woven aluminum strips which offers protection against airborne

dust and dirt. Periodic washing with warm water is needed to keep the Filter clean.

For best results, coating with Air Filter Adhesive (shown below) is recommended.

Filters & Filter Adhesive

Filter Adhesive

Filter Adhesive

Catalog Number Description

FAS-412 14 oz. Aerosol Spray

Use the filter adhesive to help increase efficiency of air filters. The

adhesive spray helps trap small particles that normally pass through

the filter and helps protect the elements within.

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

436 Eaton B-Line series electrical enclosures

Accessories

Baffle Plates

Hole Seals

Baffle Plates

Baffle Plate Used with

Louver Plate

ABC

Catalog Number in. mm in. mm in. mm Catalog Number

BP23 3.25 83 3.25 83 2.50 64 LKP23

BP33 3.87 98 4.50 114 3.75 95 LPK33

BP34 4.75 121 4.50 114 3.75 95 LPK34

BP43 4.50 114 5.50 140 4.75 121 LPK43

BP44 5.62 143 5.50 140 4.75 121 LPK44

BP64 5.12 130 7.50 191 6.75 171 LPK64

BP66 7.37 187 7.50 191 6.75 171 LPK66

BP84 5.31 135 9.50 241 8.75 222 LPK84

BP86 7.68 195 9.50 241 8.75 222 LPK86

BP88 10.06 256 9.50 241 8.75 222 LPK88

BP812 14.81 376 9.50 241 8.75 222 LPK812

B

C .50

(13)

A

Baffle Plates are intended to be used with Louver Plates when it is necessary

to prevent direct access into the enclosure through the louver opening. The

plate is designed to mount to the inside of the enclosure using the same

cut-out and mounting holes required to mount the Louver Plate Kit. Plates

are (16) gauge steel and have an ANSI 61 gray polyester powder finish.

UL Listed.

.21 D hole

(5)

Bolt-On Accessories

Illustration Sheet and Catalog Number Discount Schedule: C2

Subclass: DS0

Protects knockout openings and extra pushbutton or conduit openings from dirt, oil, dust and water.

Each hole seal has oil-resistant gasketing and plated stud and wing nut. Available in steel finished

with ANSI 61 polyester powder or unpainted stainless steel.

Oil-Tight Hole Seals

Catalog Number Application Max. Hole Hole Seal

Diameter Diameter

Steel Stainless in. mm in. mm

SPBG SPBGSS Miniature oil-tight pushbutton holes 0.88 22 1.22 31

SPB SPBSS Standard oil-tight pushbutton holes 1.25 32 1.75 44

S050 S050SS 1/2-inch conduit holes .88 22 1.38 35

S075 S075SS 3/4-inch conduit holes 1.06 27 1.56 40

S100 S100SS 1-inch conduit holes 1.38 35 1.88 48

S125 S125SS 1 1/4-inch conduit holes 1.69 43 2.19 56

S150 S150SS 1 1/2-inch conduit holes 2.00 51 2.50 64

S200 S200SS 2-inch conduit holes 2.50 64 3.00 76

S250 S250SS 2 1/2-inch conduit holes 3.00 76 3.50 89

S300 S300SS 3-inch conduit holes 3.62 92 4.12 105

S350 S350SS 3 1/2-inch conduit hole 4.12 105 4.62 117

S400 S400SS 4-inch conduit holes 4.62 117 5.12 130

Painted Steel - U.L. listed as Type 3R,

12, 13, & 4

Stainless Steel - U.L. listed as Type 4X

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

437 B-Line series electrical enclosures Eaton

Accessories

Bolt-On Accessories

Illustration Sheet and Catalog Number Discount Schedule: C2

Subclass: DS0

Drip Shields

Casters

NEMA 12 Drip Shield Kits

Catalog Number Fits Enclosure

DK12A 12.00 inch wide

DK16A 16.00 inch wide

DK20A 20.00 inch wide

DK24A 24.00 inch wide

DK30A 30.00 inch wide

DK36A 36.00 inch wide

NEMA 4X Drip Shield Kits

Catalog Number Fits Enclosure

DK12SS 12.00 inch wide

DK16SS 16.00 inch wide

DK20SS 20.00 inch wide

DK24SS 24.00 inch wide

DK30SS 30.00 inch wide

DK36SS 36.00 inch wide

The NEMA 4X Drip Shield Kit is intended for use with Type 4X and

Type 4 Single Door Wall-Mount Enclosures. It offers protection to the

door and hardware from dripping water and falling dust. The drip shield

is constructed from (14) gauge steel and has a fine brushed finish. The

shield attaches to the enclosure top front. The kit includes a drip shield,

stainless steel hardware, and sealing compound. UL Listed.

The NEMA 12 Drip Shield Kit is intended for use with Type 12 Single

Door Wall-Mount Enclosures. It offers protection to the door and

hardware from dripping water and falling dust. The drip shield is

constructed from (14) gauge steel and has an ANSI 61 gray polyester

powder finish. It attaches to the enclosure front, above the door. The

kit includes a drip shield, stainless steel clamps, hardware and sealing

compound. UL Listed

Casters for Series AW-9 and AW-14 Consoles

Mounting

Catalog Number Description plate size

(front to back)

4700-CC Set of 4 casters, 2 mounting plates and hardware 16”

4700-CC2 Set of 4 casters, 2 mounting plates and hardware 19”

Each set contains 2 swivel casters and two stationary casters. Composition rubber

wheel is self-lubricating and has a soft rubber tread with a hard rubber core. Each

swivel wheel has a side brake. Each caster has a 200 pound load capacity.

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

438 Eaton B-Line series electrical enclosures

Accessories

Bolt-On Accessories

Illustration Sheet and Catalog Number

Barrier

Barrier/Shelf Kit Fits Enclosure

(and larger)

A B Length x Depth

Catalog Number in. mm in. mm in. mm

BK412 3.87 98 11.75 298 12.00x4.00 305x102

BK415 3.87 98 14.75 375 15.00x4.00 381x102

BK418 3.87 98 17.75 450 18.00x4.00 457x102

BK424 3.87 98 23.75 603 24.00x4.00 610x102

BK430 3.87 98 29.75 756 30.00x4.00 762x102

BK436 3.87 98 35.75 908 36.00x4.00 914x102

BK448 3.87 98 47.75 1213 48.00x4.00 1219x102

BK612 5.87 149 11.75 298 12.00x6.00 305x152

BK615 5.87 149 14.75 375 15.00x6.00 381x152

BK618 5.87 149 17.75 450 18.00x6.00 457x152

BK624 5.87 149 23.75 603 24.00x6.00 610x152

BK630 5.87 149 29.75 756 30.00x6.00 762x152

BK636 5.87 149 35.75 908 36.00x6.00 914x152

BK648 5.87 149 47.75 1213 48.00x6.00 1219x152

Barrier/Shelf Kits are intended for use with Type 1 and Type 3R

Telephone Termination Cabinets. Barrier/Shelf kits can also be used

with other types of enclosure designs provided the enclosure

dimensions are large enough to fit the Barrier/Shelf (see table). The

flanged lip design creates a ridged barrier construction or a shelf for

containing and storing spare fuses and other components. Each kit

includes all the necessary hardware for field installation. The

Barrier/Shelf is constructed from (16) gauge steel and has an

ANSI 61 gray polyester powder finish.

Discount Schedule: C2

Subclass: AQ0

B

.56

(14)

A

.87

(22)

B-1.75

(44)

.37 flanged up

(9)

(omit center hole where

“B” is less than 23.75)

CL

.21 D hole

(5)

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

439 B-Line series electrical enclosures Eaton

Accessories

Component Mounting Device

Component Mounting Device

Catalog Number Description

ECMD1 Small mounting aid

The Component Mounting Device is a small mounting aid especially

designed to make mounting of small 35 mm DIN rail mountable

components easier. It can be used whenever the installation of a

35 mm DIN rail is impractical, or when there is not enough space

left in an enclosure. Because of its industrial grade self-adhesive it

can be installed much easier and quicker than a conventional DIN

rail, without hole drilling and screw mounting. B-Line’s component

mounting device can hold components up to 1.1 lbs in weight. The

initial adhesive power is 40%. After 24 hours, it has its full holding

power of 1.1 lbs. ECMD1 can also be screw mounted if a more

secure mounting is desired or if the surface is rough. All that is

necessary to install our ECMD1 is a smooth and clean surface.

Sold in packages of five (5).

Discount Schedule: C2

Subclass: TH0

1.5

(38)

1.5

(38)

1.5

(38)

1.7

(43)

.55

(13.5)

Technical Data

Application: Direct attachment of small components and

35 mm DIN rails, EN 50022

Capacity: 0.44 lb. (200 g) initially

1.1 lb (500 g) after 24 hour waiting period

Mounting Surface: All smooth surfaces, (e.g. metals, laquered

surfaces, plastics other than polyethylene,

polypropylene and rubber). Mounting surface must

be dry and free from dust, oil, separating agents

and other contamination.

Dimensions: 1.7x1.5x0.55” (43x38x14 mm)

Hole pattern: 0.5” distance, ∆ 0.14” (12.8 mm; ∆ 3.6 mm)

Material: polyamide (rated UL 94V-0) with non-deteriorating

high-performance adhesive

Temperature range: -22° to +131°F (-30° to +55°C)

Included: mounting screw for perforated 35 mm DIN rail, EN 50022

Mounting holes for

screw mounting

Self-adhesive

Bolt-On Accessories

Illustration Sheet and Catalog Number

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

440 Eaton B-Line series electrical enclosures

Accessories

Electrical Accessories

Terminal Block Kits

Illustration Sheet and Catalog Number

JIC Terminal Strap Kit

Terminal Strap Kit Quantity Fits Enclosure Extra Strap Kit

ABC D Of Straps Height x Width

Catalog Number in. mm in. mm in. mm in. mm in. mm Catalog Number

86TS 6.25 159 4.25 108 1.12 28 4.50 114 2 8.00x6.00 203x152 8TS

108TS 8.25 210 6.25 159 1.12 28 6.50 165 2 10.00x8.00 254x203 10TS

1210TS 10.25 260 8.25 210 2.43 62 8.50 216 3 12.00x10.00 305x254 12TS

1212TS 10.25 260 10.25 260 2.43 62 10.50 267 3 12.00x12.00 305x305 12TS

1412TS 12.25 311 10.25 260 2.43 62 10.50 267 3 14.00x12.00 356x305 14TS

1614TS 14.25 362 12.25 311 2.43 62 12.50 318 4 16.00x14.00 406x356 16TS

JIC Terminal Strap Kits fit all styles and types of JIC

enclosures. The kits are furnished with flat straps for

mounting Flat Based Terminal Blocks, (see Flat Based

Terminal Blocks, page 445). There is adequate space on

each terminal strap should the user wish to provide another

style of block. Terminal straps are made from (10) gauge

steel with an electrogalvanized finish. They are fastened to

channel clamping nuts which allows them to adjust along

the width of the channel bracket assembly. Extra Strap Kits

can be ordered separately and come furnished with all

hardware necessary for channel mounting.

Discount Schedule: C2

Subclass: DS0

B +.75

(19)

B

A

C

1.50

(38)

flat strap

channel bracket

shaded area is

useable space

D ( useable space)

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

441 B-Line series electrical enclosures Eaton

Accessories

Electrical Accessories

Terminal Block Kits

Illustration Sheet and Catalog Number

JIC Terminal Block Strip Kit

B +.75

(19)

B C

A

1.25

(32)

terminal

block strip

channel bracket assembly

D ( useable space)

JIC Terminal Block Strip Kits fit all styles and types of JIC

Enclosures. Kits are furnished with Terminal Strips and

contain Medium-Duty Channel Mount Terminal Blocks,

Terminal End and Clamps. Terminals have tubular screw

type lugs which accept wire sizes from #18 through #8.

Terminal Strips are fastened to channel nuts which allow

them to adjust along the entire width of the channel

bracket assembly. Extra Strip Kits can be ordered

separately. They come furnished with all the hardware

necessary for channel mounting but do not include the

terminal blocks. Terminal blocks, ends, and clamps can

be ordered separately as well, (see Channel Mount

Terminal Blocks, page 444).

Discount Schedule: C2

Subclass: DS0

Terminal Strap Kit Quantity Fits Enclosure Extra Strap Kit

ABC D Of Straps Height x Width

Catalog Number in. mm in. mm in. mm in. mm in. mm Catalog Number

86TB 6.25 159 4.25 108 2.15 55 4.50 114 2 8.00x6.00 203x152 8TB

108TB 8.25 210 6.25 159 2.15 55 6.50 165 2 10.00x8.00 254x203 10TB

1210TB 10.25 260 8.25 210 3.56 90 8.50 216 3 12.00x10.00 305x254 12TB

1412TB 12.25 311 10.25 260 3.56 90 10.50 267 3 14.00x12.00 356x305 14TB

1614TB 14.25 362 12.25 311 3.56 90 12.50 318 4 16.00x14.00 406x356 16TB

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

442 Eaton B-Line series electrical enclosures

Accessories

Electrical Accessories

Terminal Block Kits

Illustration Sheet and Catalog Number

NEMA Terminal Strap Kits

Terminal Strap Kit Quantity Fits Enclosure Extra Strap Kit

Catalog Number A BC D of Straps Height x Width Catalog Number

in. mm in. mm in. mm in. mm in. mm

16TS12 11.25 286 7.25 184 2.18 55 11.75 298 2 16.00x12.00 406x305 16S

20TS16 15.25 387 11.25 286 2.18 55 15.75 400 3 20.00x16.00 508x406 20S

20TS20 15.25 387 15.25 387 2.18 55 15.75 400 4 20.00x20.00 508x508 20S

24TS20 19.25 489 15.25 387 2.18 55 19.75 502 4 24.00x20.00 610x508 24S

24TS24 19.25 489 19.25 489 2.18 55 19.75 502 5 24.00x24.00 610x610 24S

30TS20 25.25 641 15.25 387 2.18 55 25.75 654 4 30.00x20.00 762x508 30S

30TS24 25.25 641 19.25 489 2.18 55 25.75 654 5 30.00x24.00 762x610 30S

36TS24 31.25 794 19.25 489 2.18 55 31.75 806 5 36.00x24.00 914x610 36S

36TS30 31.25 794 25.25 641 2.18 55 31.75 806 6 36.00x30.00 914x762 36S

42TS30 37.25 946 25.25 641 2.18 55 37.75 959 6 42.00x30.00 1067x762 42S

48TS36 43.25 1099 31.25 794 2.18 55 43.75 1111 7 48.00x36.00 1219x914 48S

60TS36 55.25 1403 31.25 794 2.18 55 55.75 1416 7 60.00x36.00 1524x914 60S

NEMA Terminal Strap Kits fit Type 4, Type 4X and Type 12

Enclosures. Kits are furnished with flanged straps for

mounting Flat Base Terminal Blocks, (See Flat Base

Terminal Blocks, page 445). There is adequate space on

each terminal strap should the user wish to provide another

style block. Terminal straps are (14) gauge steel with an

electrogalvanized finish. They are fastened to channel nuts

which allow them to adjust along the width of the channel

bracket assembly. Three channel brackets are supplied with

kits that fit enclosures that are 36 inches wide. Extra Strap

Kits can be ordered separately and come furnished with all

hardware necessary for channel mounting.

Discount Schedule: C2

Subclass: DS0

B +1.00

(25)

A

C

1.50

(38)

flanged strap

shaded area is useable space

channel bracket assembly

omit when “B” is less than 36.00

D (useable space)

CL

B

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

443 B-Line series electrical enclosures Eaton

Accessories

Electrical Accessories

Terminal Block Kits Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Channel Mounted Terminal Blocks

Catalog Number Description Illustration Quantity

CTB3005 Medium-duty channel mount terminal 1 5

CTE3001 Medium-duty channel mount end 1 1

CT6005 Heavy-duty channel mount terminal 2 5

CE6001 Heavy-duty channel mount end 2 1

CTC2 Channel mount terminal clamp 1 & 2 2

25012A Channel Strip (72 inch) 1 & 2 1

Medium-Duty Channel Mount terminal blocks are

rated at 600 VAC, 50 Amps. Terminal lugs are

plated copper and have tubular screw contacts.

Terminal wire range is from #22 through #8 AWG.

Each terminal block top has a painted marking area

intended for circuit designation. These blocks are

designed to dovetail into channel and can be

stacked in combination with both Medium-Duty

and/or Heavy-Duty Channel Mount type terminals.

One Channel Mount Terminal End and two

Channel Clamps are required to terminate a stack

of blocks (order separately).

L=(.43+[N x.43])

(11+[N x11])

.43 (TYP)

(11)

1.18

(30)

1.18

(30)

1.46

(37)

.62

(16)

.62

(16)

marking area

N = number of terminal blocks

clamp

terminal end

1.23

(31)

.18

(5)

.18

(5)

channel

clamp

L=(.56+[N x.56])

(14+[N x14])

.56 (TYP)

(14)

1.63

(41)

marking area

N = number of terminal blocks

clamp

terminal end

1.50

(38)

channel clamp

Illustration 1

Illustration 2

Heavy-Duty Channel Mount terminal blocks are

rated at 600 VAC, 90 Amps. Terminal lugs are

plated copper and have tubular screw contacts.

Terminal wire range is from #18 through #4 AWG.

Each terminal block top has a painted marking area

intended for circuit designation. These blocks are

designed to dovetail into channel and can be

stacked in combination with both Heavy-Duty and/or

Medium-Duty Channel Mount type terminals. One

Channel Mount Terminal End and two Channel

Clamps are required to terminate a stack of blocks

(order separately).

CTB3005 CTE3001

CT6005

CTC2

25012A

CE6001

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

444 Eaton B-Line series electrical enclosures

Accessories

Electrical Accessories

Terminal Block Kits Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Flat Base Terminal Blocks

Medium-Duty Flat Base type terminal blocks are

rated at 600 VAC, 50 Amps. Terminal lugs are

plated copper and have tubular screw contacts.

Terminal wire range is from #22 through #8 AWG.

Each terminal block top has a painted marking area

intended for circuit designation. These blocks are

designed to stack in combination with both MediumDuty and/or Heavy-Duty Channel Mount type

terminals. One Flat Based Terminal End and

hardware is required to terminate a stack of blocks

(order separately).

Heavy-Duty Flat Base terminal blocks are rated at

600 VAC, 90 Amps. Terminal lugs are plated copper

and have tubular screw contacts. Terminal wire

range is from #18 through #4 AWG. Each terminal

block top has a painted marking area intended for

circuit designation. These blocks are designed to

stack in combination with both Heavy-Duty and/or

Medium-Duty Flat Base type terminals. One Flat

Base Terminal End and hardware is required to

terminate a stack of blocks (order separately).

L=(.43+[N x.43])

(11+[N x11])

.43 (TYP)

(11)

1.23

(31)

.62

(16)

marking area

N = number of terminal blocks

terminal end

1.23

(31)

L=(.56+[N x.56])

(14+[N x11])

.56 (TYP)

(11)

1.30

(33)

marking area

N = number of terminal blocks

terminal end

1.50

(38)

Illustration 1

Illustration 2

fits #8 screw

.12

(3)

fits #8 screw .62

(16)

.12

(3)

FTB3005 FTE3001

FT6005 FE6001

Catalog Number Description Illustration Quantity

FTB3005 Medium-duty flat base terminal 1 5

FTE3001 Medium-duty flat end, (includes #8 screws) 1 1

FT6005 Heavy-duty flat base terminal 2 5

FE6001 Heavy-duty flat end, (incudes #8 screws) 2 1

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

445 B-Line series electrical enclosures Eaton

Accessories

Electrical Accessories

Terminal Strap Support & Lights

Illustration Sheet and Catalog Number

Terminal Strap Support

Terminal Strap Support Kit

Catalog Number Description

TSK Two support brackets

This kit is intended for supporting the Terminal Straps and Strips off

the back of panels or enclosure walls. The “Z” shaped brackets

are made from (12) gauge steel and have a white enamel paint

finish. Two brackets and hardware are furnished with each kit.

Terminal Straps and Strips must be purchased separately.

Discount Schedule: C2

Subclass: DS0

Electrical Accessories Discount Schedule: C2

Enclosure Lights Subclass: DS0

Illustration Sheet and Catalog Number

Enclosure Lights

Catalog Number Description

ELS25-120 Enclosure Light with on/off switch

ELMS25-120 Enclosure Light with motion sensor

Technical Data

Operating voltage: 110-120V/50-60 Hz

Lamp type: Compact fluorescent light bulb

Power consumption: 11 W (~75W incand.), Base: 2G7, electronic ballast

Light intensity: 900 Lm

Lamp life: 5,000 hours

Switch: On/off switch (for light only)

Motion sensor: PIR = Passive Infrared (see note)

Receptacle: US/Canada, 120 VAC, 15A max.

Connection: 3 pole screw terminal for AWG 14 max. (2.5 mm2

)

(includes cable strain relief)

Mounting: M5 screws (not included), 11.8” (300mm) hole distance

Dimensions: Length 13.6” (l345m) x Width 3.6” (91mm) x Depth 1.6” (40mm)

Housing: Plastic UL94V-0

Weight: 0.9 lbs. (0.4 kg) - 1.3 lbs. (0.6 kg) with magnet

Protection Type: IP 20

Agency Approvals: VDE, UL

The ELS25 light was designed to fit in tight spaces in enclosures. It

features an optional integrated receptacle so that electrical devices

(e.g. power tools) can be easily plugged in when needed. The standard

light can be screw mounted in a variety of positions. The motion

sensor version was designed to eliminate the need for a door switch.

• Also available in magnet mount models.

Note: A passive infrared (PIR) motion sensor detects the motion of the enclosure door being opened and automatically

turns on the light. The sensor is factory pre-set to turn the light off 5 minutes after all motion ceases. The motion

sensor does not detect movement through glass or fiberglass, thus allowing installation in enclosure with glass doors.

ELS25-120 ELMS25-120

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

446 Eaton B-Line series electrical enclosures

Accessories

Electrical Accessories Discount Schedule: C2

LED 025 Enclosure Lights Subclass: DS0

Illustration Sheet and Catalog Number

Technical Data

Power consumption max. 5 W (~ 75 W incandescent bulb)

Luminosity 400 Lm at 120° (1200 Lm at 360° or equivalent 95W light bulb)

Lamp type LED, 120° angle of radiation

light color - daylight, color temperature - 6,500 K

Service life 60,000 hrs. at 68 °F (20 °C)

Connection 2-pole plug with snap lock; AC: max. 2.5 A / AC 240 V, white

connector; DC: max. 2.5 A / DC 60 V, blue connector

Housing plastic, transparent

Mounting magnet, M5 screws (not included), or clip (M6 screws)

torque 2 Nm max.

Operating temperature -22°F to +140 °F (-30°C to +60 °C)

Storage temperature -40°F to +185 °F (-40°C to +85 °C)

Dimensions see drawings

Protection type/Protection class IP20 / II (double insulated)

Accessories input connector (P/N: BL264057) and output connector (P/N: BL264058)

cable for supply )P/N: BL244357) or cable for daisy chain (P/N: BL244359)

Approvals UL File No. E234324, VDE, GOST-R

Other options:

• Available in magnet and clip mount models

• Available in DC models

Enclosure Lights with Input Connector Included

Part No.

screw mount Operating voltage Description

BL02540.0-01-0003 AC 100-240 V, 50/60 Hz (min. AC 90 V, max. AC 265 V) starter on/off switch with power input connector

BL02540.0-01 AC 100-240 V, 50/60 Hz (min. AC 90 V, max. AC 265 V) add-on on/off switch for daisy chaining

BL02541.0-01-0003 AC 100-240 V, 50/60 Hz (min. AC 90 V, max. AC 265 V) starter PIR motion sensor¹ with power input connector

BL02541.0-01 AC 100-240 V, 50/60 Hz (min. AC 90 V, max. AC 265 V) add-on PIR motion sensor¹ for daisy chaining

¹ Passive Infrared (PIR) motion sensor is factory pre-set to turn the light off 6 minutes after all motion ceases

LED 025 light with on/off

switch and screw mount

13.8” (351mm)

9.8” (250mm)

On/off switch light

Screw mount end view

∆1.3” (33mm) ∆1.3” (33mm)

2.0” (51mm) 2.0” (51mm)

1.4” (36mm) 1.6” (40mm)

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

447 B-Line series electrical enclosures Eaton

Accessories

Electrical Interlocks

Catalog Number Description Volts/Hz

BAEK115NDH Electrical Interlock 120/60

Electrical Interlocks

Catalog Number Description Volts/Hz

BAEK115 Electrical Interlock 120/60

The BAEK115NDH is designed to be used with standard B-Line series

enclosures that have no handles. This interlock requires drilling several

holes in the cover and the body for mounting.

Electrical Interlock Defeater

Catalog Number Description

BAEKDF Defeater

This defeater is key operated and enables personnel to enter an

enclosure while the enclosures internal components are energized.

Turning the key disengages the circuit to the electrical interlock.

The BAEK115 is designed to be used with standard B-Line series door latching

mechanisms. When turned on, this interlock will prevent the door handle from

being turned to open the door. This interlock is designed to fit handles in the

following enclosures:

(A) All two door NEMA 12 enclosures

(B) Free standing NEMA 12 enclosures

(C) All consoles

(D) All single door NEMA 12 enclosures which have 3 pt. handle mechanisms.

(E) Two door NEMA 12 enclosures for flange-mounted disconnects

(F) Modular NEMA 12 enclosures

(G) Multi-door NEMA 12 enclosures

Electrical Accessories

Interlocks Discount Schedule: C2

Illustration Sheet and Catalog Number Subclass: DS0

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

448 Eaton B-Line series electrical enclosures

Accessories

Part Number Switch Type Suitable Wire

BL01350.0-00 Change Over (CO) Round cable, stranded wire AWG 18 to 17 (with wire end ferrule)

BL01351.0-00 Normally Closed (NC) Round cable, stranded wire AWG 18 to 16 (with wire end ferrule)

BL01352.0-00 Normally Open (NO) Round cable, stranded wire AWG 18 to 16 (with wire end ferrule)

Technical Data

Maximum Switching Capacity 10A resistive / 1.5A inductive @ AC 250V

Service Life VDE: > 10,000 cycles

UL: > 6,000 cycles

Connection 4-pole clamp with strain relief, clamping torque 0.5 Nm maximum

Housing plastic according to UL 94V-0, gray/black

Mounting MS screws (not included)

Mounting Position variable

Operating / Storage temperature -4°F to +185°F (-20°C to +85°C)

Operating / Storage humidity maximum 90% RH (non-condensing)

Dimensions 3.4” x 2.5” x 1.2” (87mm x 64mm x 30mm)

Weight approximately 1.8 oz. (50g)

Protection Type IP20

Approvals UL & VDE intended

Door Switch

Illustration Sheet and Catalog Number Discount Schedule: C2

Subclass: DS0

The door switch monitors the position of cabinet doors and is available in three versions. For example,

it can be used for switching a light when opening a door (NC), or to activate a fan when closing a door

(NO). The version with change over contact (CO) can be used as a normally closed and/or normally

open contact. The wide mechanical adjustment range of the door switch offers versatile mounting; the

housing is adjustable within a 13/8” (35mm) range, while the screw flange with a slotted hole offers an

additional 13/16” (21mm). The travel of the switch is another 5/16” (8mm).

Dimensional Drawings Wiring Diagrams

CO NC NO

N

1.18”

(30mm)

0.81”

(21mm)

0.20”

(5.3mm)

1.40”

(36mm)

2.52” (64mm) 1.97” (50mm)

L

1

N

L

1

N

L

2 4 2 4 1

1.38”

(35mm)

3.41”

(86mm)

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

449 B-Line series electrical enclosures Eaton

Accessories

Receptacles for Enclosures

Catalog Number Description

ER1 USA/Canada

ER2 Germany

ER3 France/Benelux

ER4 Switzerland

ER5 Great Britain/Ireland

Provide a safe and convenient method for adding a receptacle/outlet

inside electrical enclosures.

USA/Canada Germany France Switzerland GB

Technical Data

Maximum ratings: 15 amps @125 VAC

Mounting: Clip for 35 mm DIN rail, EN 50022

Connection: 3xAWG14 max. (2.5 mm)

Dimensions: 3.6x2.4x1.9” (92x62x48 mm)

Electrical Accessories

Receptacles

Illustration Sheet and Catalog Number

Discount Schedule: C2

Subclass: TH0

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

450 Eaton B-Line series electrical enclosures

Accessories

Columns & Bases

Illustration Sheet and Catalog Number

Columns

Catalog Number Type

Column Size Access Opening

A x B

Width x Depth Height x Width

in. mm in. mm

AC-44COL Straight 4.00x4.00 102x102 6.00x2.75 152x70

AC-44ACOL Angled 4.00x4.00 102x102 6.00x2.75 152x70

AC-66COL Straight 6.00x6.00 152x152 6.75x4.75 171x121

AC-66ACOL Angled 6.00x6.00 152x152 6.75x4.75 171x121

Bases

Base Size

Catalog Number A x B

Width Depth

C D

in. mm in. mm

AC-1818BASE 18.00x18.00 457x457 17.00x17.00 432x432

AC-2424BASE 24.00x24.00 610x610 23.00x23.00 584x584

Application

• Enable floor mounting of various types of enclosures.

• Designed to support enclosures at a 60˚ angle to the floor

Discount Schedule: C2

Subclass: DR0

Construction

• Columns are fabricated from (14) gauge steel and provide rigid support of

mounted equipment

• Flanges are (10) gauge steel

• All continuous welded seams are finished smooth

• External and internal edges are rounded to prevent injury or damage to cables

• Column has a gasketed access plate

• Kit consisting of a box connector, gasket and hardware is furnished

• Top flange of angle column type is at a 60˚ angle to the floor

• Bases have hole pattern suitable for any size or type column

• Floor mounting holes and leveling screws provided with each base

Finish

• Wash and phosphate undercoat

• ANSI 61 gray polyester powder finish

Standards

• Conforms to NEMA standard for Type 13 and Type 12

AC-44ACOL

shown

AC-44COL

shown

AC-1818BASE

shown

Accessories

451 B-Line series electrical enclosures Eaton

Accessories

Columns & Bases

Illustration Sheet and Catalog Number

5.50

(140)

5.50 (140)

4.00

(102)

4.00 (102)

4.00

(102)

4.00 (102) 6.00 (152)

7.75

(197)

7.75

(197)

6.00

(152)

7.75 (197)

.12

(3)

.12

(3)

.12

(3)

.12

(3) 3.31

(84) 3.31

(84)

3.31

(84) 3.31

(84)

3.31 (84) 3.31 (84) 3.31 3.31 (84) (84)

4.62

(117)

4.62 (117)

A

A

A

B

B

B

D C

41.00

(1041)

35.00

(889)

2.12

(54)

straight

column

access plate

(see table)

base (see flange detail)

.31 D hole (typical)

(8)

angled column

Top Flange Bottom Flange

4.00 x 4.00 6.00 x 6.00

Flange Detail

CL

CL

CL

CL

Top & Bottom Flange

Notes: Flange holes are .28 D. Flange radii are .37 R.

Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

7.75 (197)

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

452 Eaton B-Line series electrical enclosures

Accessories

Operator Adapter Kits

Intended for use on all B-Line series disconnect enclosures with

universal cutouts. Adapter kits are required to install a disconnect in

B-Line series enclosures with universal mounts. Each kit contains an

adapter plate and all parts used to interlock the disconnect operating

mechanism with the master door. Installation instructions are included

in each kit.

Operator Adapter Kits

Catalog Number Brand and Type of Operator

AP-ABFD Allen-Bradley† 1494F and 1494D

AP-ABV Allen-Bradley† 1494V or 1494U

AP-CH Cutler-Hammer† C361, C371/ABB Controls

AP-GE General Electric† STDA

AP-ITE I-T-E Max-Flex†

AP-SD Square D† Class 9422, (variable depth only)

AP-WSM Westinghouse† SM

AP-WAMT Westinghouse† AMT (below handle) and Flex Shaft™

AP-CH shown

Disconnect Accessories

Illustration Sheet and Catalog Number Discount Schedule: C2

Subclass: DS0

Blank Adapter Plates

Blank Adapter Plates

Catalog Number Description

7.5 BAP Wall-mounted Enclosures

10.5 BAP Floor and Free-Standing Enclosures

Blank Adapter Plates are designed to cover the cut-outs in either the flange

or center post on Disconnect Enclosures when the disconnect switch is not

installed. Plates are constructed from 12 gauge steel. Each kit contains

two plates, gasket, and hardware. The kit is designed to sandwich the

gasket between the enclosure opening and exterior plate. The exterior plate

has an ANSI 61 gray enamel paint finish, the interior plate has a white

enamel paint finish.

† Marks are the property of their respective owners.

Accessories

453 B-Line series electrical enclosures Eaton

Accessories

Catalog Description Typical Use Quantity Number

10168 #8-32 x .375 inch self tapping steel screw Perforated panels 20

10169 #10-32 screw JIC 12 & 14, small 3R & 1 panel mtg 4

10240 A #10-32 stainless screw JIC 4X panel mtg 4

10242 A .375-16 stainless flange nut NEMA 4X panel mtg 4

10242 B .375-16 stainless flange nut NEMA 4X panel mtg 6

10242 C .375-16 stainless flange nut NEMA 4X panel mtg 8

10242 D .375-16 stainless flange nut NEMA 4X panel mtg 10

10243 A .375-16 flange nut NEMA 12 & 4, large 3R panel mtg 4

10243 B .375-16 flange nut NEMA 12 & 4, large 3R panel mtg 6

10243 C .375-16 flange nut NEMA 12 & 4, large 3R panel mtg 8

10243 D .375-16 flange nut NEMA 12 & 4, large 3R panel mtg 10

10108 A Formed hinge and screw RTHC cover mtg 2

10118 A #10-32 gasketed screw WPSC cover mtg 10

10129 A Oval head screw, cupped washer Type 1 telephone cabinet cover mtg 10

10119 A #10-32 retaining screw & washer JIC-SC, consolet, console, pushbutton cover mtg 10

10166 A #10-32 x .50 inch steel screw Miscellaneous cover mtg 20

10167 A #10-32 x .50 inch stainless screw MIscellaneous cover mtg 20

29645 #10-32 ground screw Type 1 Junction Boxes 1

29646 #10-32 square flat screw Screw Covers 2

A variety of Hardware Packages intended to be used as replacement hardware parts for the different styles and types of

B-Line series enclosures. For more information or for availability of other replacement parts consult the factory.

Discount Schedule: C2

Subclass: DS0

Hardware Packages

Hardware

Illustration Sheet and Catalog Number

Hardware Packages

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

454 Eaton B-Line series electrical enclosures

Accessories

Hardware

Illustration Sheet and Catalog Number

Grounding Devices

Grounding Device

Catalog Approximate Length Ring Terminal

Number Description Wire Size Between Ring For Stud

Terminals Diameter

in. mm in. mm

GLK2 Grounding Kit .- .-- - -

GS88 Grounding Strap #8 8.00 203 .250 6

GS816 Grounding Strap #8 16.00 406 .250 6

GS48 Grounding Strap #4 8.00 203 .375 10

GS416 Grounding Strap #4 16.00 406 .375 10

C.S.A. Grounding Kit is intended for use on Industrial Control Enclosures with panels where

product must comply with Canadian Standards Association (C.S.A.) requirements. The kit

includes hardware, labels and instructions for application. The grounding strap is used to

provide electrical continuity between metal parts which must be electrically connected. The

strap is stranded copper with a ring terminal at each end. The strap is insulated in green wrap.

Discount Schedule: C2

Subclass: DS0

Ground Lug Kits

Catalog Number Wire Range Fastener

10184 A #6-#14 AWG CU/AL #10-32

10184 B 1/0-#14 AWG CU/AL #10-32

10184 C 250MCM-1/0 CU/AL .25-20

Ground Lug Kits

Ground Lug Kits are intended to provide a means for

equipment grounding for most enclosures. Lug sizes 1/0

and above have a “J” shaped design to lay-in wire and

cable. The fastener is colored green to meet NEC

standards for grounding devices.

10184A

GLK2

GS88

GS816 GS48 GS416

10184B

10184C

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

455 B-Line series electrical enclosures Eaton

Accessories

Hardware

Illustration Sheet and Catalog Number

Touch-Up Paint

Touch-Up Paint

Catalog Number Description

84033 White enamel

84034 ANSI 61 gray

84035 RAL 7035 light gray

Touch-Up Paint can be used to repair the finish of panels and

enclosures. Paint is available in ANSI 61, RAL 7035, and White

Enamel in 12oz. spray cans.

Channel Nut Package

Catalog Number Description Quantity

TN228-20 Large, .375-16 thread 20

N624-20 Small, .25-20 thread 20

N627-20 Small, 10-32 thread 20

Sealing Device Packages

Catalog Number Description Quantity

SEALS Wire seal screw 10

SEALWN Wire seal wing nut 10

SEALC Wire seal clip 10

Channel Nuts are intended to be used on channel strut typically found in Consoles,

Free-Standing, Terminal, and Disconnect Enclosures. There are two sizes of clamp

nuts available. One size fits the 1.62 inch wide (large) channel; the other fits the

.81 inch wide (small) channel. The small channel nuts come in two thread sizes

(see table).

Discount Schedule: C2

Subclass: DS0

Sealing hardware devices are used as replacement pieces for various enclosures

and wireway. All hardware is plated.

Discount Schedule: C2

Subclass: DS0

SEALC

SEALS SEALWN

Sealing Device Packages

Channel Nuts

Accessories

Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

456 Eaton B-Line series electrical enclosures

Accessories

Industry Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458-459

Enclosure Comparison Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460-461

Materials & Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 462

Corrosion Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 463-467

Wireway Selection Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 468-470

Decimal & Metric Equivalents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471

Metric Conservion Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 472

Engineering Data

Engineering Data

457 B-Line series electrical enclosures Eaton

Industry Standards

Enclosure Ratings

Third party certifiers, such as UL & CSA, have adopted most of the enclosure ratings from the ANSI /NEMA 250

standard for electrical enclosures. Such ratings identify the environmental capabilities of enclosures based on

specified performance criteria. Thus, the type of enclosure can be selected as deemed appropriate for the

application.

These enclosures are intended to house electrical equipment rated at no more than 1000 volts for use in

nonhazardous locations. Such enclosures do not protect devices against conditions such as condensation, icing,

corrosion or contamination which may occur within the enclosure or may enter via the conduit or unsealed

openings, and are not intended to prevent entry or operation by unauthorized personnel.

Sources of Standards

NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION

1300 North 17th Street

Suite 1847

Rosslyn, VA 22209

• NEMA Standards Publication No. 250, Enclosures for Electrical Equipment (1000 Volts Maximum)

• NEMA Standards Publication No. ICS6, Enclosures for Industrial Controls and Systems

ELECTRICAL/ELECTRONIC MANUFACTURERS ASSOCIATION OF CANADA

10 Carlson Court, Suite 500

Rexdale (Toronto), Ontario

Canada, M9W 6L2

UNDERWRITERS LABORATORIES INC.

333 Pfingsten Road

Northbrook, IL 60062

• UL 50, Enclosures for Electrical Equipment

• UL 50E, Enclosures for Electrical Equipment Environmental Considerations

• UL 508A, Industrial Control Panels

• UL 870, Wireway, Auxiliary Gutters and Associated Fittings

• UL 414, Meter Sockets

CANADIAN STANDARDS ASSOCIATION

178 Rexdale Boulevard

Rexdale (Toronto), Ontario

Canada, M9W IR3

• CSA Standard C22.2 No. 94, Special Purpose Enclosures, Industrial Control Equipment for use in

Ordinary (Nonhazardous) locations.

• CSA Standard C22.2 No. 40 M1989, Cutout, Junction & Pull Boxes

• CSA Standard C22.2 No. 26 1952, Wireways, Auxillary Gutters & Associated Fittings

• CSA Standard C22.1, 1990, Canadian Electrical Code

NATIONAL FIRE PROTECTION ASSOCIATION

Batterymarch Park

Quincy, MA 02269

• NFPA 70 National Electrical Code

Engineering Data

NFPA

458 Eaton B-Line series electrical enclosures

Engineering Data

Industry Standards

An enclosure is a surrounding case constructed to provide a degree of protection to personnel against incidental

contact with the enclosed equipment and to provide a degree of protection to the enclosed equipment against

specified environmental conditions.

A brief description of the more common types of enclosures used by the electrical industry relating to their

environmental capabilities follows:

NEMA UL (UL 50) CSA 22.2 No. 94-M91

Enclosures are intended for indoor use

primarily to provide a degree of

protection against limited amounts of

falling dirt.

Enclosures are intended for outdoor

use primarily to provide a degree of

protection against rain, sleet, wind

blown dust and damage from external

ice formation.

Enclosures are intended for outdoor

use primarily to provide a degree of

protection against rain, sleet and

damage from external ice formation.

Enclosures are intended for indoor or

outdoor use primarily to provide a

degree of protection against windblown

dust and rain, splashing water,

hose-directed water and damage from

external ice formation.

Enclosures are intended for indoor or

outdoor use primarily to provide a

degree of protection against corrosion,

windblown dust and rain, splashing

water, hose-directed water and damage

from external ice formation.

Enclosures are intended for indoor

use primarily to provide a degree of

protection against circulating dust,

falling dirt and dripping noncorrosive liquids.

Enclosures with knockouts are intended

for indoor use primarily to provide a

degree of protection against circulating

dust, falling dirt and dripping noncorrosive liquids.

Enclosures are intended for indoor

use primarily to provide a degree of

protection against dust, spraying of

water, oil and noncorrosive coolant.

Indoor use primarily to provide a degree

of protection against limited amounts of

falling dirt.

Outdoor use primarily to provide a

degree of protection against rain, sleet,

windblown dust and damage from

external ice formation.

Outdoor use primarily to provide a

degree of protection against rain, sleet,

and damage from external ice formation.

Indoor or outdoor use primarily to

provide a degree of protection against

windblown dust and rain, splashing

water, hose-directed water and damage from external ice formation.

Indoor or outdoor use primarily to

provide a degree of protection against

corrosion, windblown dust and rain,

splashing water, hose-directed water

and damage from external ice formation.

Indoor use primarily to provide a degree

of protection against circulating dust,

falling dirt and dripping noncorrosive

liquids.

Indoor use primarily to provide a degree

of protection against dust, spraying of

water, oil and noncorrosive coolant.

General purpose enclosure. Protects

against accidental contact with live parts.

An enclosure for either indoor or outdoor

use, constructed so as to provide a

degree of protection against rain, snow,

and windblown dust; undamaged by

the external formation of ice on the

enclosure.

An enclosure for either indoor or outdoor

use, constructed so as to provide a

degree of protection against rain, and

snow, undamaged by the external

formation of ice on the enclosure.

An enclosure for either indoor or outdoor

use, constructed so as to provide a

degree of protection against rain, snow,

windblown dust, splashing and

hose-directed water; undamaged by the

external formation of ice on the enclosure.

An enclosure for either indoor or outdoor

use, constructed so as to provide a

degree of protection against rain, snow,

windblown dust, splashing and

hose-directed water; undamaged by the

external formation of ice on the enclosure; resists corrosion.

An enclosure for indoor use, constructed

so as to provide a degree of protection

against circulating dust, lint, fibres, and

flyings; dripping and light splashing of

noncorrosive liquids; not provided with

knockouts.

An enclosure for indoor use, constructed

so as to provide a degree of protection

against circulating dust, lint, fibres, and

flyings; dripping and light splashing of

noncorrosive liquids; and provided with

knockouts.

An enclosure for indoor use, constructed

so as to provide a degree of protection

against circulating dust, lint, fibres, and

flyings; seepage and spraying of

noncorrosive liquids including oils and

coolants.

Type 1

Type 3

Type 3R

Type 4

Type 4X

Type 12

Type 12K

Type 13

Type 1

Type 3

Type 3R

Type 4

Type 4X

Type 12/12K

Type 13

Type 1

Type 3

Type 3R

Type 4

Type 4X

Type 12

Type 12K

Type 13

This material reprinted by permission of the

National Electrical Manufacturers Association from

NEMA Standards Publication 250, copyright 2005

by NEMA.

Engineering Data

459 B-Line series electrical enclosures Eaton

Engineering Data

Comparison of Specific Applications

of Enclosures for Indoor Nonhazardous Locations

Enclosure Type

Provides a degree of protection

against the following environmental conditions 1* 4 4X 12 12K 13

Incidental contact with the enclosed equipment XXXXXX

Falling Dirt XXXXXX

Falling liquids and light splashing XXXXX

Circulating dust, lint, fibers and flyings** XXXXX

Settling airborne dust, lint, fibers and flyings** XXXXX

Hosedown and splashing water X X

Oil and coolant seepage XXX

Oil or coolant spraying and splashing X

Corrosive agents X

Occasional temporary submersion

Occasional prolonged submersion

* These enclosures may be ventilated.

** These fibers and flying are nonhazardous materials and are not considered the Class III type ignitable fibers or combustible flyings. For Class III

type ignitable fibers or combustible flyings see the National Electrical Code, Article 500.

Comparison of Specific Applications

of Enclosures for Outdoor Nonhazardous Locations

Enclosure Type

Provides a degree of protection

against the following environmental conditions: 3 3R*** 4 4X

Incidental contact with the enclosed equipment XXXX

Rain, snow and sleet* XXXX

Sleet**

Windblown dust X XX

Hosedown X X

Corrosive agents X

Occasional temporary submersion

Occasional prolonged submersion

* External operating mechanisms are not required to be operable when the enclosure is ice covered.

** External operating mechanisms are operable when the enclosure is ice covered.

*** These enclosures may be ventilated.

“This material is reproduced by permission of the National Electrical Manufacturers Association from

NEMA Standards Publication 250, copyright 1996 by NEMA.”

Engineering Data

460 Eaton B-Line series electrical enclosures

Engineering Data

IEC Publication 529 Classification of Degrees of Protection Provided by Enclosures provides a system for

specifying the enclosures of electrical equipment on the basis of degree of protection provided by the

enclosure. IEC 529 does not specify degrees of protection against mechanical damage of equipment, risk of

explosions, or conditions such as moisture (produced for example by condensation), corrosive vapors, fungus

or vermin. NEMA Standards Publication 250 does test for environmental conditions such as corrosion, rust,

icing, oil and coolants. For this reason, and because the tests and evaluations for other characteristics are not

identical, the IEC Enclosure Classification Designations cannot be exactly equated with NEMA Enclosure Type

Numbers.

The IEC designation consists of the letters IP followed by two numerals. The first characteristic numeral

indicates the degree of protection provided by the enclosure with respect to persons and solid foreign objects

entering the enclosure. The second characteristic numeral indicates the degree of protection provided by the

enclosure with respect to the harmful ingress of water.

Table A-1 provides an equivalent conversion from NEMA Enclosure Type Numbers to IEC Enclosure

Classification Designations. The NEMA Types meet or exceed the test requirements for the associated IEC

Classifications; for this reason Table A-1 cannot be used to convert from IEC Classifications to NEMA Types.

Table A-1 Conversion of NEMA Type Numbers to IEC Classification Designations

(Cannot be used to convert IEC Classification Designations to NEMA Type Numbers)

NEMA Enclosure IEC Enclosure

Type Number Classification Designation

1 IP20

2 IP22

3 IP55

3R IP24

3S IP55

4 and 4X IP66

5 IP53

6 and 6P IP67

12 and 12K IP54

13 IP54

Note: This comparison is based on tests specified in IEC Publication 529.

Components Suitable for Closing Openings in Enclosures

Enclosure Openings shall be closed by equipment

Type rated for enclosure types

3 3, 3S, 4, 4X

3R 3, 3R, 3S, 4, 4X

4 4, 4X

4X 4X

12,12K 12, 12K, 13, 4, 4X

13 13

Comparison Between NEMA Enclosure Type Numbers

and IEC Enclosure Classification Designations

Engineering Data

461 B-Line series electrical enclosures Eaton

Engineering Data

Caution: Environmental capabilities of enclosures, including materials and finishes, are limited to the degree of

protection provided by the “type” rating of the selected enclosure. See industry standards for more information.

METALS

Characteristics of Various Metals

Hot Rolled Pickled and Oiled Steel Sheets (ASTM A1011)

A low-carbon, hot-finished steel that has had the normal mill

oxide removed by means of an acid bath. After de-scaling, an

oil film is applied to protect the surface. Removal of the mill

oxide improves the surface appearance, uniformity, and

finishing quality.

Cold Rolled Steel (ASTM A1008)

A low-carbon, cold-finished steel having commercial quality,

close thickness tolerance and better surface than hot rolled

pickled and oiled.

Galvanized/Galvanneal Steel (ASTM A653)

Steel with a zinc coating applied by the hot dip galvanizing

process. The zinc coating provides a degree of corrosion

protection, and also provides some protection at the sheared

edges.

Stainless Steel Type 304, 316, or 316L

An excellent corrosion resistant material with excellent

mechanical properties. It has many of the same chemical

resistance attributes of fiberglass materials.

5052-H32 Aluminum

An excellent alloy for enclosure manufacturing. It exhibits

good resistance to corrosion in a marine atmosphere.

Gasket Material

Peel and stick - high density polyurethane gasket with

excellent compression set and oil resistance.

Temperature range for consistant use: -40°F to -194°F

Foam In Place (FIP) - two-component polyurethane foam

gasket with good adhesion, strong shape re-setting, and

seamless flexible size shape geometry.

Temperature range for consistant use: -40°F to -212°F

Closed cell neoprene - broad temperature range and strong

resistance to aging, UV, oxidation, and ozone.

Temperature range for consistant use: -40°F to -200°F

Finishes

Polyester Urethane - Powder: A durable and smooth coating with good adhesion and corrosion resistance

suitable for outdoor use. Provides good impact protection against heat or chemicals.

Electrocoat (E-Coat) - Liquid: A rugged cathodic acrylic coating that results in a unique combination of

durability and corrosion resistance.

Epoxy - Powder: A tough, durable finish which is corrosion resistant and resistant to many solvent oils.

Gloss may be affected by prolonged exposure to UV light.

Materials and Finishes

Magnesium

Magnesium Alloys

Zinc

Beryllium

Aluminum - Zinc Alloys (7000 series)

Aluminum - Magnesium Alloys (5000 series)

Aluminum (1000 series)

Aluminum - Magnesium Alloys (3000 series)

Aluminum - Magnesium - Silicon Alloys (6000 series)

Cadmium

Aluminum - Copper Alloys (2000 series)

Cast Iron, Wrought Iron, Mild Steel

Austenitic Nickel Cast Iron

Type 410 Stainless Steel (active)

Type 316 Stainless Steel (active)

Type 304 Stainless Steel (active)

Naval Brass, Yellow Brass, Red Brass

Tin

Copper

Lead-Tin Solders

Admiralty Brass, Aluminum Brass

Manganese Bronze

Silicon Bronze

Tin Bronze

Type 410 Stainless Steel (passive)

Nickel - Silver

Copper Nickel Alloys

Lead

Nickel - Aluminum Bronze

Silver Solder

Nickel 200

Silver

Type 316 Stainless Steel (passive)

Type 304 Stainless Steel (passive)

Incoloy 825

Hastelloy B

Titanium

Hastelloy C

Platinum

Graphite

More Anodic

Anodic End

Cathodic End

Engineering Data

462 Eaton B-Line series electrical enclosures

Engineering Data

We manufactures enclosures from a wide range of materials, offering varying degrees of resistance against chemical

corrosion. All materials are affected by corrosion in some manner. Depending on the physical properties of the material

and the environment to which it is exposed, chemical or electromechanical corrosion may occur. In order to select the

appropriate material for your application, refer to the corrosion resistance table on the following pages.

Atmospheric Corrosion

Atmospheric corrosion occurs when a material is exposed to airborne liquids, solids, or gases. Some sources of atmospheric

corrosion are moisture, salt, dirt, and sulfuric acid. This form of corrosion is typically worse outdoors, and especially near

marine environments.

To combat the effects of atmospheric corrosion, the National Electrical Manufacturers Association (NEMA) has developed the

NEMA 4X rating. An enclosure carrying the NEMA 4X rating meets certain minimum conditions of corrosion resistance.

Specifically, the materials from which NEMA 4X rated enclosures are formed must withstand two hundred hours of salt spray

with no more evidence of corrosive pitting than is exhibited by a concurrently tested sample of Type 304 stainless steel.

We offer metallic NEMA 4X rated enclosures in aluminum, and stainless steel Type 304 and Type 316L as well as a full line

of NEMA 4X rated non-metallic enclosures.

Chemical Corrosion

Chemical corrosion takes place when a material comes into direct contact with a corrosive agent. The severity of chemical

corrosion is affected by chemical concentration level, frequency of washing, and operating temperature. Refer to the chart

below for a general overview of how different enclosures might perform when in contact with chemicals of varying pH. The

chart is provided as a quick guide to how different materials might perform in your environment. We recommend consulting

the detailed corrosion resistance table provided on the following pages to be sure that the appropriate material is selected.

Storage Corrosion

Wet storage stain (White rust) is caused by the entrapment of moisture between the surfaces of closely packed and poorly

ventilated material for an extended period. Wet storage stain is usually superficial, having little affect on the properties of the

material.

Proper handling and storage will help to assure stain free material. If a product arrives wet, it should be unpacked and allowed

to dry before storage. Dry material should be stored in a well-ventilated, low-moisture environment to avoid the formation of

condensation. Outdoor storage is undesirable and should be avoided whenever possible.

Galvanic Corrosion

Galvanic corrosion occurs when two or more dissimilar metals are in contact in the presence of seawater or another electrolyte.

In this situation, an electrolytic cell is created and the metals become either an anode or a cathode. The anodic material will

corrode and the cathodic material will be protected.

Whether a material is anodic depends on the relative positions of the interacting materials in the Galvanic Series Table (shown

at left). For example: If zinc and steel are in contact, the zinc acts as the anode and will corrode while protecting the steel. If

steel and copper are in contact, the steel is now the anode and will corrode while protecting the copper.

The rate at which galvanic corrosion occurs depends

on several factors:

1. The amount and concentration of electrolyte

present. An indoor, dry environment will support

little or no galvanic corrosion relative to a wet

atmosphere.

2. The relative amount of the materials. A small

amount of anodic material in contact with a large

amount of cathodic material will result in

accelerated corrosion of the anodic material.

Inversely, a large amount of anodic material in

contact with a small amount of cathodic material

will decrease the rate of corrosion.

3. The relative position of the materials in the

Galvanic Series. The further apart the interacting

materials are in the Galvanic Series, the greater

the potential for corrosion of the anodic material.

Corrosion Resistance

Solvent Caustic Acid

Stainless Steel Type 316 Non-Metallic Non-Metallic

Stainless Steel Type 304 Stainless Steel Type 316 Stainless Steel Type 316

Non-Metallic Stainless Steel Type 304 Stainless Steel Type 304

Aluminum

Steel, Epoxy

Powder Coated

Non-Metallic Non-Metallic Non-Metallic

Steel, Epoxy Powder Coated

Steel, Epoxy

Powder Coated

Aluminum Aluminum

Preferred Satisfactory Limited

Note: The corrosion data given in the table on the following pages is for general comparison only. (Reference Corrosion Resistance Tables, Second Edition)

The presence of contaminates in chemical environments can greatly affect the corrosion rate of any material. B-Line strongly suggests that field service tests or simulated laboratory

tests using actual environmental conditions be conducted in order to determine the proper materials and finishes to be selected. We offer no guarantee or warranty as to the

suitability of a particular material for use in any specific environment which is beyond our control.

Engineering Data

463 B-Line series electrical enclosures Eaton

Engineering Data

Unpainted Metal Enclosures Painted Steel Enclosures

Aluminum Stainless Steel Stainless Steel Acrylic Electrocoat, Polyester Powdercoat,

Type 304 Type 316 ANSI 61 Gray ANSI 61 Gray

Chemical Cold Warm Hot Cold Warm Hot Cold Warm Hot Cold Warm Hot Cold Warm Hot

Acetic Acid, 50% RLU R R L R R R U U U R R U

Acetic Acid, 10% RLU R R R R R R U U U R R R

Acetone RRR R R R R R R U U U U U U

Aluminum Chloride UUU R R R R R R R -- -- RRR

Aluminum Sulfate ,Saturated RRR R R R R R R R -- -- RRR

Ammonia Gas -- -- -- R -- -- R -- -- R -- -- RRL

Ammonium Hydroxide, 10% LLL R RR R R R R -- -- LLL

Amyl Acetate RRR R R R R R R U U U L U U

Amyl Alcohol RRR R -- -- R RRR -- -- RRR

Aniline RRR R R R R R R U U U U U U

Aqua Regia UUU U U U U U U -- -- -- UUU

Benzene, Benzol RRR R R R R R R U U U U U U

Benzoic Acid LLU R RR R R R U U U R R --

Boric Acid RR L R R R R R R R -- -- R R --

Bromine Water UUU U U U U U U U U U U U U

Butyl Acetate RRR R -- -- R RRUUU L U U

Butyl Alcohol, Tertiary RRR R R R R R R R -- -- R -- --

Butyric Acid LLL R RR R R R U U U R R --

Calcium Chloride LLU R RR R R R R -- -- RRR

Calcium Hydroxide U -- -- R RR R R R R -- - RR --

Calcium Nitrate R R -- R -- -- R RR -- -- -- RRR

Carbon Dioxide, Wet R R -- R RL R R L R -- -- RRR

Carbon Disulfide (Bisulfide) RRR R R L R R R R -- -- UUU

Carbon Monoxide RRR R R R R R R -- -- -- RRR

Carbon Tetrachloride LLU L L L R R R U U U U U U

Chlorine, Liquid -- -- -- R L -- -- -- -- -- -- -- -- -- --

Chlorine Water, Saturated R -- -- U UU U U U R -- -- RRR

Chlorobenzene (Phenylchloride) R R -- R RL R R R U U U U U U

Chloroform RLU R L L R R R U U U U U U

Chlorox Bleach Solution, 5.5% Chlorine UUU -- -- -- R -- -- -- -- -- -- -- --

Chromic Acid, 10% R R -- R RL R R R U U U U U U

Citric Acid, 5% LLL R UU R R R R -- -- RRR

Copper Chloride UUU U U U U U U R -- -- RRR

Copper Sulfate UUU R R R R R R U U U R R R

Cresol R L -- R R -- R L -- UUU U U U

Crude Oil R R -- R RR R R R -- -- -- RRR

Diesel Fuels R -- -- R -- -- R -- -- -- -- -- R R --

Dimethyl Formamide R -- -- -- -- -- R RRUUU U U U

Dioxane RRR R R R R R R -- -- -- UUU

Ethyl Acetate RRR R R L R R R U U U U U U

Ethyl Alcohol RRR R R R R R R U U U R -- --

Ethyl Chloride RRR R R R R R R U U U -- -- --

Ethyl Ether R -- -- R RR R R R U U U U U U

Ethylene Glycol RR L R R -- R RRR -- -- RRR

Ethylene Oxide RRR R R L R R R -- -- -- UUU

Ferric Chloride UUU U U U U U U R -- -- R R --

Formaldehyde, 37% Solution RRR R R R R R R R -- -- R R --

Formic Acid, 10% R R -- R RU R R R U U U -- -- --

Freon, F-22 R -- -- R -- -- R RR -- -- -- -- -- --

Gasoline, Unleaded RRR R -- -- R -- -- RUU R R R

Heptane R L -- R RR R R R -- -- -- RRR

Hexane R -- -- R RR R R R R -- -- R -- --

Hydrobromic Acid, Dilute UUU U U U U U U -- -- -- R R --

Corrosion Resistance Table

The corrosion data given in this table is for general comparison only. (Reference Corrosion Resistance Tables, Second Edition)

The presence of contaminates in chemical environments can greatly affect the corrosion rate of any material.

R = Recommended L = Limited Use U = Unsatisfactory -- = Information not available Cold = 50-80°F Warm = 130-170°F Hot = 200-212°F

Engineering Data

464 Eaton B-Line series electrical enclosures

Engineering Data

Corrosion Resistance Table

Non-Metallic Enclosures Door Gasket Materials

Foam-in-Place Neoprene Silicone

Polyurethane Polyurethane Rubber Rubber Viton, Rubber

Polyamide Polycarbonate Polyester Sponge Sponge Sponge Sponge Sponge

LL R -- -- LR R

R R R L L LR R

R U U U U LUU

L R R R R RR R

L R R R R RR R

U U L R RR -- U

U U U R R RR R

-- U L U U UU U

-- L L U U RU R

U U U U U UR R

-- LUU U -- -- R

R U L U U RU R

L U L R U RR R

L R R R L UR R

-- U U -- U UU R

-- U L R U UR R

RR R -- -- UR R

LU L -- -- UU R

R R R R R RR R

U -- U -- L RR R

LR R -- L RR R

L -- R R R RR R

RU L -- -- U -- R

L -- R -- R RR R

R U L U U UU R

LL L -- -- UU R

RR R -- U UU R

R U U L U UU R

R U U L U UU R

-- L R -- -- UU U

U R L U U UL R

RR R R -- RR R

L R -- -- R RR R

LR R -- R R -- R

UU U -- U U -- R

L -- L -- L UU R

-- RR R -- RU R

UU L U -- UL L

-- U L -- -- UL L

R U L L U UR U

R L R R U UR U

RU L -- -- LU R

RU U -- U UU U

L R R R R RR R

-- R R -- U UU U

LR R -- R RR R

LR R -- U R -- L

R R L U U RR R

-- U R -- U RU R

RL R -- R RU R

R R R R U RU R

-- L R R R RU R

L -- L -- -- UU R

Engineering Data

The corrosion data given in this table is for general comparison only. (Reference Corrosion Resistance Tables, Second Edition)

The presence of contaminates in chemical environments can greatly affect the corrosion rate of any material.

R = Recommended L = Limited Use U = Unsatisfactory -- = Information not available Cold = 50-80°F Warm = 130-170°F Hot = 200-212°F

465 B-Line series electrical enclosures Eaton

Engineering Data

Unpainted Metal Enclosures Painted Steel Enclosures

Aluminum Stainless Steel Stainless Steel Acrylic Electrocoat, Polyester Powdercoat,

Type 304 Type 316 ANSI 61 Gray ANSI 61 Gray

Chemical Cold Warm Hot Cold Warm Hot Cold Warm Hot Cold Warm Hot Cold Warm Hot

Hydrochloric Acid, 20% UUU U U U U U U R -- -- R R --

Hydroflouric Acid, 10% UUU U U U U U U -- -- -- R -- --

Hydrogen Peroxide, 30% RRR R R R R R R -- -- -- R -- --

Hydrogen Sulfide, Wet R -- -- U UU R R R R R -- R R --

Isopropyl Alcohol R -- -- R R -- R RR -- -- -- UUU

Jet Fuels R R -- R -- -- R RRR -- -- R R --

Kerosine R R -- R RR R R R R -- -- R R --

Lactic Acid, 10% R -- -- R RL R R R U U U R R R

Magnesium Chloride UUU L L L R R R R -- -- RRR

Methyl Alcohol R L -- R RL R R R -- -- -- R R --

Methyl Ethyl Ketone R L -- R L -- R RRUUU U U U

Methylene Chloride RRR R R L R R R U U U U U U

Mineral Oils R R -- R -- -- R RRR -- -- R -- --

Naptha R -- -- R R -- R -- -- RUU R R R

Nitric Acid, 10% UUU R R R R R R R -- -- RRU

Nitrobenzene R -- -- R RL R R R U U U U U U

Oleic Acid R -- -- R RL R R R R R -- RRR

Oleum R -- -- R -- -- R -- -- UUU U U U

Oxalic Acid, 10% R L -- U UU U U U R -- -- R R --

Oxygen R R -- R -- -- R RR -- -- -- -- -- --

Ozone R R -- R R -- R RR -- -- -- -- -- --

Perchloroethylene RRR R R R R R R -- -- -- RUU

Phenol RRR R R R R R R R -- -- UUU

Phosphoric Acid, 25% UUU R R L R L U R -- -- RRR

Phthalic Acid RRR R R R R R R -- -- -- R -- --

Potassium Chloride, 30% UUU R R R R R R R -- -- RRR

Potassium Dichromate, 30% RR L R R R R R R R -- -- RRR

Potassium Hydroxide, 10% UUU R R L R R R R R U U U U

Potassium Nitrate, 50% RRR R R L R R R R -- -- RRR

Potassium Permanganate, 10% RRR R L L R R L U U U R R --

Pyradine RRR R R R R R R -- -- -- UUU

Sodium Bicarbonate, 20% R -- -- R RR R R R R -- -- R R --

Sodium Bisulfite, 10% UUU R R L R R R R -- -- R R --

Sodium Carbonate, 10% UUU R R L R R R U U U R R U

Sodium Chlorate, 10% RRR R R R R R R R -- -- R R --

Sodium Chloride, 10% RUU R R L R R R R -- -- RRR

Sodium Hydroxide, 10% UUU R R R R R R R -- -- RUU

Sodium Hypochlorite, 10% RL L R L U R -- -- R R -- UUU

Sodium Nitrate RRR R R U R R R R -- -- RRR

Sodium Sulfate RR L R R U R R R R -- -- RRU

Sulfur Dioxide RRR R R R R R R R R -- RRR

Sulfuric Acid, 5% UUU L U U R -- -- R -- -- RRR

Tartaric Acid LUU R R R R R R -- -- -- RRR

Tetrahydrofuran UUU R -- -- L LL -- -- -- UUU

Toluene RRR R R R R R R U U U R U U

Trichloroacetic Acid UUU U U U U U U -- -- -- RRU

Trichloroethylene RR L R L L R R L U U U U U U

Trisodium Phosphate UUU R R -- R R -- -- -- -- RRU

Turpentine L -- -- R R -- R RLR -- -- R R --

Water RR L R R R R R R R -- -- RRR

Xylene RRR R R R R R R -- -- -- R -- --

Zinc Chloride UUU U U U L L L R -- -- RRR

Zinc Sulfate UUU R R R R R R R -- -- RRR

Corrosion Resistance Table cont.

Engineering Data

The corrosion data given in this table is for general comparison only. (Reference Corrosion Resistance Tables, Second Edition)

The presence of contaminates in chemical environments can greatly affect the corrosion rate of any material.

R = Recommended L = Limited Use U = Unsatisfactory -- = Information not available Cold = 50-80°F Warm = 130-170°F Hot = 200-212°F

466 Eaton B-Line series electrical enclosures

Engineering Data

Corrosion Resistance Table

Non-Metallic Enclosures Door Gasket Materials

Foam-in-Place Neoprene Silicone

Polyurethane polyurethane Rubber Rubber Viton, Rubber

Polyamide Polycarbonate Polyester Sponge Sponge Sponge Sponge Sponge

L L L R R RR R

L R L -- -- RU R

-- R R -- -- UR R

LR R -- -- RL U

R R R -- U UU U

R L R -- U UU R

R R R -- U RU R

LR R -- -- RR R

L R R R R RR R

R L L U U RU U

R U L U U UU U

RU U U U -- -- R

L R R R R RR R

-- R R -- R UU R

L R L U U UU R

L U L -- U UU R

L R R R R LU R

U -- U -- U LU R

LR R -- -- UR R

L R R -- -- UR R

-- UL R -- LR R

R -- U U U UU R

LU U -- U RU R

LL L -- -- R -- --

L -- R -- -- RR R

-- R R R R RR R

U -- L -- R RR R

LU U -- R RL R

LR R -- -- RR R

UR L -- -- R -- R

L U -- -- -- LR R

UR R -- -- RR R

-- R R -- -- RR R

UR R -- -- RR R

-- R R -- -- RL R

L R R R R RR R

RU L -- -- RR R

UR L -- -- LR R

LU R -- -- RU R

LR R -- R RR R

LL R -- -- RR R

L L L U U UU R

LR R -- R RR R

-- UU U -- UU U

LU L L U -- R R

-- R U -- -- UU L

L -- L L U UU R

U L -- -- R RR R

-- L R R U UU R

R R R R RU -- R

-- U L L U UU R

LR R -- -- RR R

LR R -- -- RR R

Engineering Data

The corrosion data given in this table is for general comparison only. (Reference Corrosion Resistance Tables, Second Edition)

The presence of contaminates in chemical environments can greatly affect the corrosion rate of any material.

R = Recommended L = Limited Use U = Unsatisfactory -- = Information not available Cold = 50-80°F Warm = 130-170°F Hot = 200-212°F

467 B-Line series electrical enclosures Eaton

Engineering Data

Wireway Selection (Reference NFPA 70, National Electrical Code)

Definition

Wireways are troughs with hinged or removable covers for housing and protecting electric wires and cable.

Conductors are laid into the wireway after the wireway has been installed as a complete system.

Uses

The use of wireways are permitted as follows:

1. For exposed work in dry locations. For outdoor or wet locations, use Type 3R wireway.

2. If installed in inaccessible spaces, the use of wireway is permitted only for use with audio

signal conductors (per NEC®† 376.10).

3. In hazardous locations as permitted by NEC®† sections 501, 502 and 504.

4. For extensions through walls, if the length passing through the wall is unbroken and access

to conductors can be maintained from both sides.

The use of wireways is not permitted where a risk of severe physical damage or corrosive vapor is present.

Size of Conductors

Table I shows maximum allowable cable sizes for varying wireway sizes. (Based on UL 870 Table 7.1)

Table I

Conductors entering the wireway only at the ends of runs are limited in size only by the 20 percent fill

requirement of the NEC®. However, it is recommended that wire sizes not exceed those in Table I above.

Number of Conductors

Wireways which contain no more than 30 current-carrying conductors at any cross section, and for which the sum of the

cross-sectional areas of all contained conductors at any cross section does not exceed 20% of the interior cross-sectional

area of the wireway, require no derating of cables. (Refer to Table II below)

Wireway Size Maximum Cable Size

Inches AWG or kcmil

2.5x2.5 2

3x3 1

4x4 4/0

4x6 4/0

6x6 500

12x6 500

8x8 900

10x10 1250

12x12 2000

Cross sectional area of conductors

≤ 20% of cross sectional

area of wireway.

For exceptions allowing more

conductors, see NEC® 362-5.

Table II Engineering Data

468

Wireway Size Allowable Cable Area

Inches sq. in.

2.5x2.5 1.2

3x3 1.8

4x4 3.2

4x6 4.8

6x6 7.2

8x8 12.8

12x6 14.4

10x10 20.0

12x12 28.8

Eaton B-Line series electrical enclosures

† Marks are the property of their respective owners.

Engineering Data

Wireway Selection

Splices and Taps

Splices and taps are permitted within a wireway, provided they are accessible. The conductors, including

splices and taps, shall not fill the wireway to more than 75 percent of its area at the point of a splice or tap.

Cross sectional area of

splices and taps is less

than 75% of wireway’s

cross sectional area

Cross Sectional Area of Conductors (sq. in.)

SIZE XXHW, XXHW-2, THHN, THWN THW, THW-2, RHH*, RHW*

XHH THWN-2 THHW RHW-2*

AWG- Diameter Area Diameter Area Diameter Area Diameter Area

kcml in. in.2 in. in.2 in. in.2 in. in.2

14 0.1330 1.0139 0.1110 0.0097 0.1630 0.0209 0.1930 0.0293

12 0.1520 1.0181 0.1300 0.0133 0.1820 0.0260 0.2120 0.0353

10 0.1760 0.0243 0.1640 0.0211 0.2060 0.0333 0.2360 0.0437

8 0.2360 0.0437 0.2160 0.0366 0.2660 0.0556 0.3260 0.0835

6 0.2740 0.0590 0.2540 0.0507 0.3040 0.0726 0.3640 0.1041

4 0.3220 0.0814 0.3240 0.0824 0.3520 0.0973 0.4120 0.1333

3 0.3500 0.0962 0.3520 0.0973 0.3800 0.1134 0.4400 0.1521

2 0.3820 0.1146 0.3840 0.1158 0.4120 0.1333 0.4720 0.1750

1 0.4420 0.1534 0.4460 0.1562 0.4920 0.1901 0.5850 0.2688

1/0 0.4820 0.1825 0.4860 0.1855 0.5320 0.2223 0.6220 0.3039

2/0 0.5280 0.2190 0.5320 0.2223 0.5780 0.2624 0.6680 0.3505

3/0 0.5800 0.2642 0.5840 0.2679 0.6300 0.3117 0.7200 0.4072

4/0 0.6380 0.3197 0.6420 0.3237 0.6880 0.3718 0.7780 0.4754

250 0.7050 0.3904 0.7110 0.3970 0.7650 0.4596 0.8950 0.6291

300 0.7600 0.4536 0.7660 0.4608 0.8200 0.5281 0.9500 0.7088

350 0.8110 0.5166 0.8170 0.5242 0.8710 0.5958 1.0010 0.7870

400 0.8580 0.5782 0.8640 0.5863 0.9180 0.6619 1.0480 0.8626

500 0.9430 0.6984 0.9490 0.7073 1.0030 0.7901 1.1330 1.0082

600 1.0530 0.8790 1.0510 0.8676 1.1130 0.9729 1.2430 1.2135

700 1.1240 0.9923 1.1220 0.9887 1.1840 1.1010 1.3140 1.3561

750 1.1580 1.0532 1.1560 1.0496 1.2180 1.1652 1.3480 1.4272

800 1.1900 1.1122 1.1880 1.1085 1.2500 1.2272 1.3800 1.4957

900 1.2540 1.2351 1.2520 1.2311 1.3140 1.3561 1.4440 1.6377

1000 1.3120 1.3519 1.3100 1.3478 1.3720 1.4784 1.5020 1.7719

1250 1.4790 1.7180 - - 1.5390 1.8602 1.7290 2.3479

1500 1.6020 2.0156 - - 1.6620 2.1695 1.8520 2.6938

1750 1.7160 2.3127 - - 1.7760 2.4773 1.9660 3.0357

2000 1.8220 2.6073 - - 1.8820 2.7818 2.0720 3.3719

* RHH, RHW and RHW-2 without covering have the same dimension as THW.

Cross Sectional Area of Conductors

Single Conductor Cable 600V

Engineering Data

469 B-Line series electrical enclosures Eaton

Engineering Data

Wireway Selection

Sample Calculation

A. Wireway dimensions are obtained as follows:

1. List cables by size and types.

2. List cable cross sectional areas.

3. List the number of each size of cable.

4. Multiply cable cross sectional areas by number of each cable.

5. Sum the total cross sectional areas of each cable type to obtain the total cross sectional

areas for the conductors.

6. The wireway must first meet the dimensional requirements for the largest conductor. In

the example above, the largest conductor is 750 kcmil. The minimum wireway cross section

based on the largest conductor size requirements is 8” x 8”, as shown in Table I on page 466.

7. The wireway dimensions must meet 20% fill requirements. Based on the sum of the total

conductor cross sectional areas (3.19 sq. in.), the minimum wireway cross section, based on

the 20% fill requirements is 4” x 4” as shown in Table II on page 466.

8. In this example, the wireway dimensions must be the larger of the two cross sections obtained

in steps 6 and 7. In this case, 8” x 8” wireway is required.

List Cable Sizes List Cable Cross List Number Multiply (A) x (N) =

and Types Sectional Areas (A) of Cables (N) Total Cross Sectional Area for Each Size

sq. in. sq. in.

2 AWG-XXHW 0.1182 x4= 0.4728

2/0-TW 0.2290 x2= 0.4580

750 kcmil-RHH 1.1300 x2= 2.2600

Sum of the total cross sectional areas = 3.1908

Engineering Data

470 Eaton B-Line series electrical enclosures

Engineering Data

Decimal and Metric Equivalents

4ths 8ths 16ths 32nds 64ths To 3 places To 2 places Millimeters

1/64 .016 .02 0

1/32 .031 .03 1

3/64 .047 .05 1

1/16 .062 .06 2

5/64 .078 .08 2

3/32 .094 .09 2

7/64 .109 .11 3

1/8 .125 .12 3

9/64 .141 .14 4

5/32 .156 .16 4

11/64 .172 .17 4

3/16 .188 .19 5

13/64 .203 .20 5

7/32 .219 .22 6

15/64 .234 .23 6

1/4 .250 .25 6

17/64 .266 .27 7

9/32 .281 .28 7

19/64 .297 .30 8

5/16 .312 .31 8

21/64 .328 .33 8

11/32 .344 .34 9

23/64 .359 .36 9

3/8 .375 .38 10

25/64 .391 .39 10

13/32 .406 .41 10

27/64 .422 .42 11

7/16 .438 .44 11

29/64 .453 .45 12

15/32 .469 .47 12

31/64 .484 .48 12

1/2 .500 .50 13

33/64 .516 .52 13

17/32 .531 .53 13

35/64 .547 .55 14

9/16 .562 .56 14

37/64 .578 .58 15

19/32 .594 .59 15

39/64 .609 .61 15

5/8 .625 .62 16

41/64 .641 .64 16

21/32 .656 .66 17

43/64 .672 .67 17

11/16 .688 .69 17

45/64 .703 .70 18

23/32 .719 .72 18

47/64 .734 .73 19

3/4 .750 .75 19

49/64 .766 .77 19

25/32 .781 .78 20

51/64 .797 .80 20

13/16 .812 .81 21

53/64 .828 .83 21

27/32 .844 .84 21

55/64 .859 .86 22

7/8 .875 .88 22

57/64 .891 .89 23

29/32 .906 .91 23

59/64 .922 .92 23

15/16 .938 .94 24

61/64 .953 .95 24

31/32 .969 .97 25

63/64 .984 .98 25

1 1.000 1.00 25

Engineering Data

471 B-Line series electrical enclosures Eaton

Engineering Data

Metric Conversion Tables

LENGTH

U.S. to Metric Metric to U.S.

1 inch = 25.40 millimeters

1 inch = 2.540 centimeters

1 foot = 30.480 centimeters

1 foot = 0.3048 meter

1 yard = 91.440 centimeters

1 yard = 0.9144 meter

1 mile = 1.609 kilometers

1 millimeter = 0.03937 inch

1 centimeter = 0.3937 inch

1 meter = 39.37 inches

1 meter = 3.2808 feet

1 meter = 1.0936 yards

1 kilometer = 0.62137 mile

AREA

U.S. to Metric Metric to U.S.

1 sq. inch = 645.16 sq. millimeters

1 sq. inch = 6.4516 sq. centimeters

1 sq. foot = 929.03 sq. centimeters

1 sq. foot = 0.0929 sq. meter

1 sq. yard = 0.836 sq. meter

1 sq. millimeter = 0.00155 sq. inch

1 sq. centimeter = 0.1550 sq. inch

1 sq. meter = 10.7640 sq. feet

1 sq. meter = 1.196 sq. yards

Engineering Data

472

Engineering Data

Eaton B-Line series electrical enclosures

Product Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474-508

Index

Index

473 B-Line series electrical enclosures Eaton

Catalog Page

Number Number

10106-12CHC 93

10106-12CHSC 97

10106-12SC 95

10106-4QT 141

101060 G 10

101060 G NK 10

101060 GGV NK 10

101060 GRT NK 43

101060 GRTGV NK 43

101060 HS 16

101060 HS NK 16

101072 G 10

101072 G NK 10

101072 GGV NK 10

101072 GRT NK 43

101072 GRTGV NK 43

Catalog Page

Number Number

10243 A 454

10243 B 454

10243 C 454

10243 D 454

1064 SC NK 51

1064 SCGV NK 51

108P (GP) 154, 212

108PSS4 154, 212

108 SCF 53

108TB 442

108TS 441

1084-FTC 103

1084 HC 54

1084 HC NK 54

1084 RTSC 57

1084 RTSC NK 57

Index

00011184 A 427

10TB 441

10TS 440

10URMA 157, 215

10.5 BAP 452

1010 C 11

1010 E 11

1010 E NK 11

1010 EGV 11

1010 EGV NK 11

1010 FH 12, 18

1010 FL IN 13

1010 FL OUT 13

1010 FL SIDE 13

1010 FTF 11, 17

1010 FTFGV 11

1010 GF 11

1010 GFGV 11

1010 HSC 17

1010 HSCA 17

1010 HSCU 17

1010 HSE 17

1010 HSE NK 17

1010 HSF 18

1010 HSL IN 19

1010 HSL OUT 19

1010 HSL SIDE 19

1010 HST 20

1010 HSX 20

1010 L COMBO 13

1010 L COMBOGV 13

1010 L SIDE 13

1010 L SWEEP 13

1010 L SWEEPGV 13

1010 LTX 12

1010 LTXGV 12

1010 SCF 53

1010 SCS 53

1010 T 14

1010 TCF 80

1010 TCS 80

1010 TGV 14

1010 WB 413

1010 X 14

1010 XGV 14

1010-12BK 12, 18

101012 G 10

101012 G NK 10

101012 GGV NK 10

101012 HS 16

101012 HS NK 16

1010120 G 10

1010120 G NK 10

1010120 GGV NK 10

1010120 GRT NK 43

1010120 GRTGV NK 43

1010120 HS 16

1010120 HS NK 16

10101212 FR 12, 17

101024 G 10

101024 G NK 10

101024 GGV NK 10

101024 GRT NK 43

101024 GRTGV NK 43

101024 HS 16

101024 HS NK 16

101036 G 10

101036 G NK 10

101036 GGV NK 10

101036 GRT NK 43

101036 GRTGV NK 43

101036 HS 16

101036 HS NK 16

10104 HC 54

10104 HC NK 54

10104 RTHC 58

10104 RTHC NK 58

10104 RTSC 57

10104 RTSC NK 57

10104 RTSCGV 57

10104 RTSCGV NK 57

10104 SC 51

10104 SC NK 51

10104 SCG 61

10104 SCGV 51

10104 SCGV NK 51

10104 TCF 80

10104 TCS 80

10104 WPSC 63

10104-1 65

10104-12CHSC 97

10104-12SC 95

101045 HSL COMBO 19

101045 HSL SIDE 19

101045 L COMBO 14

101045 L COMBOGV 14

101045 L SIDE 14

101048 G 10

101048 G NK 10

101048 GGV NK 10

101048 GRT NK 43

101048 GRTGV NK 43

101048 GTGV NK 41

101048 HS 16

101048 HS NK 16

10106 HC 54

10106 HC NK 54

10106 RTSC 57

10106 RTSC NK 57

10106 RTSCGV 57

10106 RTSCGV NK 57

10106 SC 52

10106 SC NK 52

10106 SCG 61

10106 SCGV 52

10106 SCGV NK 52

10106 TCF 80

10106 TCS 80

10106 WPSC 63

10106-1 65

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

474

Index

Eaton B-Line series electrical enclosures

Index

10106-12CHC 93

10106-12CHSC 97

10106-12SC 95

10106-4QT 141

101060 G 10

101060 G NK 10

101060 GGV NK 10

101060 GRT NK 43

101060 GRTGV NK 43

101060 HS 16

101060 HS NK 16

101072 G 10

101072 G NK 10

101072 GGV NK 10

101072 GRT NK 43

101072 GRTGV NK 43

10108 A 453

10108 RTSC 57

10108 RTSC NK 57

10108 RTSCGV NK 57

10108 SC NK 52

10108 SCGV NK 52

10108-12CHC 93

101096 GRT NK 43

101096 GRTGV NK 43

10118 A 453

10119 A 453

10129 A 453

10166 A 453

10167 A 453

10168 409, 410, 453

10169 453

10184 A 454

10184 B 454

10184 C 454

10240 A 453

10242 A 453

10242 B 453

10242 C 453

10242 D 453

10243 A 453

10243 B 453

10243 C 453

10243 D 453

1064 SC NK 51

1064 SCGV NK 51

108P (GP) 154, 212

108PSS4 154, 212

108 SCF 53

108TB 441

108TS 440

1084-FTC 103

1084 HC 54

1084 HC NK 54

1084 RTSC 57

1084 RTSC NK 57

1084 SC 51

1084 SC NK 51

1084 SCG 61

1084 SCGV 51

1084 SCGV NK 51

1084-SD 146

1084-SDLG 146

1084-SDSS4 209

1084-SDSS6 210

1084 WPSC 63

1084-1 65

1084-12CHC 93

1084-12CHCS 93

1084-12CHQRC 99

1084-12CHSC 97

1084-12LC 91

1084-12SC 95

1084-4CHC 139

1084-4LC 137

1084-4QT 141

1084-4XACHC 201

1084-4XALC 197

1084-4XFCHQRC 261

1084-4XFCHQRCW 263

1084-4XFCHSC 259

1084-4XFLC 257

1084-4XSCHC 199

1084-4XSLC 195

1084-4XSQT 203

1084-4XSS6CHC 199

1084-4XSS6LC 195

1085-4XFCHQRC 261

1085-4XFCHQRCW 263

1085-4XFCHSC 259

1085-4XFLC 257

1086 HC 54

1086 HC NK 54

1086 RHC 72

1086 RTSC 57

1086 RTSC NK 57

1086 SC 52

1086 SC NK 52

1086 SCGV 52

1086 SCGV NK 52

1086-SD 146

1086-SDF 265

1086-SDFQR 267

1086-SDFQRCC 269

1086-SDLG 146

1086-SDSS4 209

1086-SDSS6 210

1086-1 65

1086-12CHC 93

1086-12CHSC 97

1086-12SC 95

1086-4CHC 139

1086-4QT 141

1086-4XSQT 203

1144-4XFSC 271

12DR1P 156, 214

12DR3P 155, 214

12DRCP 155, 214

12GS1 156, 214

12MC 156, 213

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

Index

475 B-Line series electrical enclosures Eaton

Index

12PMK 159, 217

12TB 441

12TS 440

12URMA 157, 215

1210P (GP) 154, 212

1210PSS4 154, 212

1210TB 441

1210 TCF 80

1210 TCS 80

1210TS 440

1210 WB 413

12104 HC 54

12104 HC NK 54

12104 RTSC 57

12104 RTSC NK 57

12104 SC 51

12104 SC NK 51

12104 SCGV 51

12104 SCGV NK 51

12104 TCF 80

12104 TCS 80

12104-1 65

12104-12CHSC 97

12105-12CHC 93

12105-12CHCS 93

12105-12CHQRC 99

12105-12LC 91

12105-12SC 95

12105-4CHC 139

12105-4LC 137

12105-4QT 141

12105-4XALC 197

12105-4XFCHQRC 261

12105-4XFCHQRCW 263

12105-4XFCHSC 259

12105-4XFLC 257

12105-4XSLC 195

12105-4XSQT 203

12105-4XSS6LC 195

12105-FTC 103

12106 HC 54

12106 HC NK 54

12106 RHC 72

12106 RTHC 58

12106 RTHC NK 58

12106 RTSC 57

12106 RTSC NK 57

12106 SC 52

12106 SC NK 52

12106 SCG 61

12106 SCGV 52

12106 SCGV NK 52

12106-SD 146

12106-SDF 265

12106-SDFQR 267

12106-SDFQRCC 269

12106-SDLG 146

12106-SDSS4 209

12106-SDSS6 210

12106 TCF 80

12106 TCS 80

12106-1 65

12106-12CHC 93

12106-12CHSC 97

12106-4QT 141

12106-4XACHC 201

12106-4XSCHC 199

12106-4XSS6CHC 199

12108-12CHC 93

12108-4QT 141

12108-4XSQT 203

1212 C 11

1212DF 155, 213

1212 E 11

1212 E NK 11

1212 EGV 11

1212 EGV NK 11

1212 FH 12, 18

1212 FL IN 13

1212 FL OUT 13

1212 FL SIDE 13

1212 FTF 11, 17

1212 FTFGV 11

1212 GF 11

1212 GFGV 11

1212 HSC 17

1212 HSCA 17

1212 HSCU 17

1212 HSE 17

1212 HSE NK 17

1212 HSF 18

1212 HSL IN 19

1212 HSL OUT 19

1212 HSL SIDE 19

1212 HST 20

1212 HSX 20

1212 L COMBO 13

1212 L COMBOGV 13

1212 L SIDE 13

1212 L SWEEP 13

1212 L SWEEP GV 13

1212 LTX 12

1212 LTXGV 12

1212P (GP) 154, 212

1212PSS4 154, 212

1212 SCF 53

1212 SCS 53

1212SP 155, 213

1212 T 14

1212 TCF 80

1212 TCS 80

1212 TGV 14

1212TS 440

1212 WB 413

1212 X 14

1212 XGV 14

1212-12BK 12, 18

121210 RHC 72

121210 RTSC 57

121210 RTSC NK 57

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

476

Index

Eaton B-Line series electrical enclosures

Index

121210 SC NK 53

121210 SCGV NK 53

121212 G 10

121212 G NK 10

121212 GGV NK 10

121212 HS 16

121212 HS NK 16

121212 SC NK 53

121212 SCGV NK 53

1212120 G 10

1212120 G NK 10

1212120 GGV NK 10

1212120 GRT NK 43

1212120 GRTGV NK 43

1212120 HS 16

1212120 HS NK 16

121224 G 10

121224 G NK 10

121224 GGV NK 10

121224 GRT NK 43

121224 GRTGV NK 43

121224 GTGV NK 41

121224 HS 16

121224 HS NK 16

121236 G 10

121236 G NK 10

121236 GGV NK 10

121236 GRT NK 43

121236 GRTGV NK 43

121236 GTGV NK 41

121236 HS 16

121236 HS NK 16

12124 HC 54

12124 HC NK 54

12124 RTC 81

12124 RTHC 58

12124 RTHC NK 58

12124 RTSC 57

12124 RTSC NK 57

12124 RTSCGV 57

12124 RTSCGV NK 57

12124 SC 51

12124 SC NK 51

12124 SCG 61

12124 SCGV 51

12124 SCGV NK 51

12124 TCF 80

12124 TCS 80

12124 WPSC 63

12124-1 65

121245 HSL COMBO 19

121245 HSL SIDE 19

121245 L COMBO 14

121245 L COMBOGV 14

121245 L SIDE 14

121248 G 10

121248 G NK 10

121248 GGV NK 10

121248 GRT NK 43

121248 GRTGV NK 43

121248 GTGV NK 41

121248 HS 16

121248 HS NK 16

12126-FM 151

12126 HC 54

12126 HC NK 54

12126 RHC 72

12126 RTC 81

12126 RTHC 58

12126 RTHC NK 58

12126 RTSC 57

12126 RTSC NK 57

12126 RTSCGV 57

12126 RTSCGV NK 57

12126 SC 52

12126 SC NK 52

12126 SCG 61

12126 SCGV 52

12126 SCGV NK 52

12126-SD 148

12126-SDLG 148

12126-SDSS4 209

12126-SDSS6 210

12126-SDW 148

12126-SDWLG 148

12126-SDWSS4 209

12126 TCF 80

12126 TCS 80

12126 WPSC 63

12126-1 65

12126-1PP 70

12126-12CHC 93

12126-12CHSC 97

12126-12SC 95

12126-4CHC 139

12126-4QT 141

12126-4XACHC 201

12126-4XFCHQRC 261

12126-4XFCHSC 259

12126-4XFLC 257

12126-4XSCHC 199

12126-4XSQT 203

12126-4XSS6CHC 199

121260 G 10

121260 G NK 10

121260 GGV NK 10

121260 GRT NK 43

121260 GRTGV NK 43

121260 HS 16

121260 HS NK 16

121272 G 10

121272 G NK 10

121272 GGV NK 10

121272 GRT NK 43

121272 GRTGV NK 43

12128 RTC 81

12128 RTHC 58

12128 RTHC NK 58

12128 RTSC 57

12128 RTSC NK 57

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

Index

477 B-Line series electrical enclosures Eaton

Index

12128 RTSCGV NK 57

12128 SC 52

12128 SC NK 52

12128 SCG 61

12128 SCGV NK 52

12128 WPSC 63

12128-1 65

121296 GRT NK 43

121296 GRTGV NK 43

12246-12 106

12248-12 106

122AMK 159, 217

124AMK 159, 217

126-12LAHM 30

126-12LAHW 30

126-12 LASD 30

126-12LBC 31

126-12LC 30

126-12LCF 27

126-12LCP 31

126-12LE15A 29

126-12LE45A 29

126-12LE45B 29

126-12LE45C 29

126-12LE9A 28

126-12LE9B 28

126-12LE9C 28

126-12LN1 28

126-12LN2 28

126-12LN3 28

126-12LSP 31

126-12LTA 29

126-12LTF 27

12604-12LW 27

12606-12LW 27

12612-12LW 27

126120-12LW 27

12624-12LW 27

12636-12LW 27

1264 SC 51

1264 SC NK 51

1264 SCGV NK 51

1264-12CHC 93

1264-4QT 141

12644-12LR 30

12648-12LW 27

1266 SC NK 52

12660-12LW 27

12666-12LR 30

128 SCF 53

128 TCF 80

128 TCS 80

128 WB 413

1284 HC 54

1284 HC NK 54

1284 RTSC 57

1284 RTSC NK 57

1284 SC 51

1284 SC NK 51

1284 SCGV 51

1284 SCGV NK 51

1284 TCF 80

1284 TCS 80

1286 RTHC 58

1286 RTHC NK 58

1286 RTSC 57

1286 SC NK 52

1286 SCGV NK 52

1286 TCF 80

1286 TCS 80

1286 WPSC 63

14TB 441

14TS 440

1412TB 441

1412TS 440

14124-1 65

14126-FTC 103

14126-SDF 265

14126-SDFQR 267

14126-SDFQRCC 269

14126-1 65

14126-12CHC 93

14126-12CHCS 93

14126-12CHQRC 99

14126-12CHSC 97

14126-12LC 91

14126-12SC 95

14126-4CHC 139

14126-4LC 137

14126-4QT 141

14126-4XACHC 201

14126-4XALC 197

14126-4XFCHQRC 261

14126-4XFCHQRCW 263

14126-4XFCHSC 259

14126-4XFLC 257

14126-4XSCHC 199

14126-4XSLC 195

14126-4XSQT 203

14126-4XSS6CHC 199

14126-4XSS6LC 195

14128-SDF 265

14128-SDFQR 267

14128-SDFQRCC 269

14128-1 65

14128-12CHC 93

14128-4QT 141

14128-4XSQT 203

1414120 GRT NK 43

1414120 GRT GV NK 43

141448 GRT NK 43

141448 GRTGV NK 43

141472 GRT NK 43

141472 GRT GV NK 43

141496 GRT NK 43

141496 GRT GV NK 43

1432-4XFSC 271

1476-4XFCHQRC 261

1476-4XFCHQRCW 263

1476-4XFCHSC 259

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

478

Index

Eaton B-Line series electrical enclosures

Index

1476-4XFLC 257

1486-12CHC 93

1486-4QT 141

15124 RTSC 57

15154 SC NK 51

15154 SCGV 51

15156 SC NK 52

15156 SCGV NK 52

16DR1P 156, 214

16DR3P 156, 214

16DRCP 156, 214

16GS1 156, 214

16MC 155, 213

16PMK 159, 217

16S 442

16TB 441

16TS 440

16TS12 442

16URMA 157, 215

16106-12CHC 93

16106-4QT 143

1612DF 155, 213

1612P (GP) 154, 212

1612PSS4 154, 212

1612SP 155, 213

1612 TCF 80

1612 TCS 80

1612 WB 413

161210-12 107

161210-SD 146

161210-SDLG 146

161210-SDW 146

16124 RTSC 57

16124 RTSC NK 57

16124 SC 51

16124 SC NK 51

16124 SCGV 51

16124 SCGV NK 51

16124 TCF 80

16124 TCS 80

16126-1PP 70

16126-FM 151

16126 HC 54

16126 HC NK 54

16126RHC 74

16126 RTSC 57

16126 RTSC NK 57

16126 SC 52

16126 SC NK 52

16126 SCG 61

16126 SCGV 52

16126 SCGV NK 52

16126-SD 146

16126-SDLG 146

16126-SDSS4 209

16126-SDSS6 210

16126-SDW 146

16126-SDWLG 146

16126-SDWSS4 209

16126 TCF 80

16126 TCS 80

16126 WPSC 63

16126-1 67

16126-12 106

16126-12TE 109

16126-4 144

16126-4XA 206

16126-4XS 205

16126-4XSS6 205

16126-SDLG 146

16126-SDWLG 146

16128 SC 52

16128 SC NK 52

16128 SCGV NK 52

16128-SD 146

16128-SDLG 146

16128-SDW 146

16128-SDWLG 146

16128-SDSS4 209

16128-SDSS6 210

16128-SDW 146

16128-1 67

16128-12 106

16128-4 144

16128-4XA 206

16128-4XS 205

16128-4XSS6 205

1614TB 441

1614TS 440

161410-12CHC 93

161410-4QT 141

161410-4XSQT 203

16146-FTC 103

16146-12CHC 93

16146-12CHCS 93

16146-12CHQRC 99

16146-12LC 91

16146-12SC 95

16146-4CHC 139

16146-4LC 137

16146-4QT 141

16146-4XACHC 201

16146-4XALC 197

16146-4XFCHQRC 261

16146-4XFCHQRCW 263

16146-4XFCHSC 259

16146-4XFLC 257

16146-4XSCHC 199

16146-4XSLC 195

16146-4XSQT 203

16146-4XSS6CHC 199

16146-4XSS6LC 195

16148-SDF 265

16148-SDFQR 267

16148-SDFQRCC 269

16148-12CHC 93

16148-4QT 141

1616P (GP) 154, 212

1616PSS4 154, 212

1616 SCF 53

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

Index

479 B-Line series electrical enclosures Eaton

Index

1616SP 155, 213

161610-SD 146

161610-SDLG 146

16164 RTSC 57

16164 RTSC NK 57

16164 SC 51

16164 SC NK 51

16164 SCGV 51

16166 HC 54

16166 HC NK 54

16166RHC 74

16166 RTSC 57

16166 RTSC NK 57

16166 SC 52

16166 SC NK 52

16166 SCG 61

16166 SCGV 52

16166 SCGV NK 52

16166-SD 146

16166-SDLG 146

16166-SDSS4 209

16166-SDSS6 210

16166-1 67

16166-12 106

16166-4 144

16166-4XA 206

16166-4XS 205

16166-4XSS6 205

16168-SD 146

16168-SDLG 146

16168-SDSS4 209

16168-SDSS6 210

16168-12 106

1620SP 155, 213

162010-SD 146

162010-SDLG 146

16206-1 67

16206-12 106

16206-4 144

16206-4XS 205

16206-4XSS6 205

16206-SD 146

16206-SDLG 146

16208-12 106

16208-SD 146

16208-SDLG 146

16208-SDSS4 209

16208-SDSS6 210

1732-4XFSC 271

1812 SCF 53

1812 TCF 80

1812 TCS 80

1812 WB 413

181210 RTSC 57

181210 SC 53

181210 SC NK 53

181210 SCGV NK 53

18124 HC 54

18124 HC NK 54

18124 RTSC 57

18124 SC 51

18124 SC NK 51

18124 SCGV 51

18124 SCGV NK 51

18124 TCF 80

18124 TCS 80

18126 HC 54

18126 HC NK 54

18126 RTC 81

18126 RTHC 58

18126 RTHC NK 58

18126 RTSC 57

18126 RTSCGV NK 57

18126 RTSC NK 57

18126 SC 52

18126 SC NK 52

18126 SCGV 52

18126 SCGV NK 52

18126 TCF 80

18126 TCS 80

18126 WPSC 63

18128 RTSC 57

18128 RTSC NK 57

18128 SC 52

18128 SC NK 52

18128 SCGV NK 52

1815 TCF 80

1815 TCS 80

1815 WB 413

18154 SC NK 51

18154 SCGV 51

18154 TCF 80

18154 TCS 80

18156 SC NK 52

18156 SCGV NK 52

18156 TCF 80

18156 TCS 80

181610-SDF 265

181610-SDFQR 267

18168-4XFCHQRC 261

18168-4XFCHQRCW 263

18168-4XFCHSC 259

18168-4XFLC 257

1818 SCF 53

1818 SCS 53

1818 TCF 80

1818 TCS 80

1818 WB 413

181810 RHC 74

181810 RTSC 57

181810 RTSC NK 57

181810 SC 53

181810 SC NK 53

181810 SCGV NK 53

181810 RHC 74

181812 SC 53

181812 SC NK 53

181812 SCGV NK 53

18184 RTSC 57

18184 RTSC NK 57

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

480

Index

Eaton B-Line series electrical enclosures

Index

18184 SC 51

18184 SC NK 51

18184 SCGV 51

18184 SCGV NK 51

18184 TCF 80

18184 TCS 80

18184 WPSC 63

18186 HC 54

18186 HC NK 54

18186 RHC 74

18186 RTC 81

18186 RTSC 57

18186 RTSC NK 57

18186 RTSCGV 57

18186 RTSCGV NK 57

18186 SC 52

18186 SC NK 52

18186 SCG 61

18186 SCGV 52

18186 SCGV NK 52

18186 TCF 80

18186 TCS 80

18186 WPSC 63

18188 RTC 81

18188 RTHC 58

18188 RTHC NK 58

18188 RTSC 57

18188 RTSC NK 57

18188 RTSCGV NK 57

18188 SC 52

18188 SC NK 52

18188 SCGV NK 52

18188 WPSC 63

18249 RTCT 84

19URMA 157, 215

20DR1P 156, 214

20DR3P 156, 214

20DRCP 156, 214

20GS1 156, 214

20MC 155, 213

20PMK 159, 217

20S 442

20TS16 442

20TS20 442

20126-1 65

20126-12 106

20128-12 106

2016DF 155, 213

2016P (GP) 154, 212

2016PSS4 154, 212

2016SP 155, 213

201610-12 107

201610-4 144

201610-4XA 207

201610-4XS 205

201610-4XSS6 205

201610-SD 146

201610-SDF 265

201610-SDFQR 267

201610-SDLG 146

201610-SDSS4 209

201610-SDSS6 210

201610-SDW 146

201610-SDWLG 146

201612-12 107

201612-4XF 277

20166-FM 151

20166RHC 74

20166 SCG 61

20166-SD 146

20166-SDLG 146

20166-SDSS4 209

20166-SDSS6 210

20166-SDW 146

20166-SDWLG 146

20166-SDWSS4 209

20166-1 67

20166-1PP 70

20166-12 106

20166-12TE 109

20166-4 144

20166-4XA 206

20166-4XS 205

20166-4XSS6 205

20167-12CHSC 101

20168-SD 146

20168-SDLG 146

20168-SDSS4 209

20168-SDSS6 210

20168-SDW 146

20168-SDWLG 146

20168-SDWSS4 209

20168-1 67

20168-12 106

20168-4 144

20168-4XA 206

20168-4XFCHQRC 261

20168-4XFCHQRCW 263

20168-4XFCHSC 259

20168-4XFLC 257

20168-4XS 205

20168-4XSS6 205

2020DF 155, 213

2020P (GP) 154, 212

2020PSS4 154, 212

2020SP 155, 213

202010-12 107

202010-SD 146

202010-SDLG 146

202010-SDW 146

202010-SDWLG 146

202012-SD 146

202012-SDLG 146

202012-SDSS4 209

202012-SDSS6 210

202012-SDW 146

202012-SDWLG 146

202012-SDWSS4 209

20206-FM 151

20206-SD 146

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

Index

481 B-Line series electrical enclosures Eaton

Index

20206-SDLG 146

20206-SDSS4 209

20206-SDSS6 210

20206-SDW 146

20206-SDWLG 146

20206-SDWSS4 209

20206-1 67

20206-12 106

20206-12TE 109

20206-4 144

20206-4XA 206

20206-4XS 205

20206-4XSS6 205

20207-12CHSC 101

20208RHC 74

20208 SCG 61

20208-SD 146

20208-SDLG 146

20208-SDSS4 209

20208-SDSS6 210

20208-SDW 146

20208-SDWLG 146

20208-SDWSS4 209

20208-1 67

20208-12 106

20208-4 144

20208-4XS 205

20208-4XSS6 205

2024SP 155, 213

202410-SD 146

202410-SDLG 146

20246-12 106

20248-1 67

20248-12 106

20248-4 144

20248-4XS 205

20248-4XSS6 205

20248-SD 146

20248-SDLG 146

203611 HRTCT 87

22 C 11

22 E 11

22 E NK 11

22 EGV 11

22 EGV NK 11

22 FH 12, 18

22 FTF 11, 17

22 FTFGV 11

22 GF 11

22 GFGV 11

22 HSC 17

22 HSCA 17

22 HSCU 17

22 HSE 17

22 HSE NK 17

22 HSF 18

22 HSL IN 19

22 HSL OUT 19

22 HSL SIDE 19

22 HST 20

22 HSX 20

22 L COMBO 13

22 L COMBOGV 13

22 L SIDE 13

22 L SWEEP 13

22 L SWEEPGV 13

22 LTX 12

22 LTXGV 12

22 T 14

22 TGV 14

22 X 14

22 XGV 14

22-12BK 12, 18, 31

22-12LAHM 30

22-12LAHW 30

22-12LASD 30

22-12LBC 31

22-12LBH 31

22-12LC 30

22-12LCF 27

22-12LCP 31

22-12LDH 31

22-12LE15A 29

22-12LE45A 29

22-12LE45B 29

22-12LE45C 29

22-12LE9A 28

22-12LE9AC 28

22-12LE9B 28

22-12LE9C 28

22-12LE9TC 28

22-12LE9TCC 28

22-12LJB 30

22-12LN1 28

22-12LN2 28

22-12LN3 28

22-12LSP 31

22-12LTA 29

22-12LTC 29

22-12LTF 27

22-12LTSC 27

22-12LTSCC 27

2204-12LW 27

2206-12LW 27

2212 G 9

2212 G NK 9

2212 GGV NK 9

2212 HS 16

2212 HS NK 16

2212-12LW 27

22120 G 9

22120 G NK 9

22120 GGV 9

22120 GGV NK 9

22120 HS 16

22120 HS NK 16

22120-12LW 27

2224 G 9

2224 G NK 9

2224 GGV 9

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

482

Index

Eaton B-Line series electrical enclosures

Index

2224 GGV NK 9

2224 HS 16

2224 HS NK 16

2224-12LW 27

2233 FR 12, 17

2236 G 9

2236 G NK 9

2236 GGV 9

2236 GGV NK 9

2236 HS 16

2236 HS NK 16

2236-12LW 27

2245 HSL COMBO 19

2245 HSL SIDE 19

2245 L COMBO 14

2245 L COMBOGV 14

2245 L SIDE 14

2248 G 9

2248 G NK 9

2248 GGV NK 9

2248 HS 16

2248 HS NK 16

2248-12LW 27

2260 G 9

2260 G NK 9

2260 GGV 9

2260 GGV NK 9

2260 HS 16

2260 HS NK 16

2260-12LW 27

2272 HS 16

2272 HS NK 16

24DR1P 156, 214

24DR3P 156, 214

24DRCP 156, 214

24GS1 156, 214

24MC 155, 213

24PMK 159, 217

24S 442

24TS20 367, 442

24TS24 367, 442

2412 TCF 80

2412 TCS 80

2412 WB 413

241210 SC NK 53

241210 SCGV NK 53

241210-12 107

241210-4XF 277

241212 SC 53

241212 SC NK 53

241212 SCGV NK 53

24124 SC 51

24124 SC NK 51

24124 SCGV 51

24124 TCF 80

24124 TCS 80

24126 RTC 81

24126 RTSC 57

24126 RTSC NK 57

24126 SC NK 52

24126 SCGV NK 52

24126 TCF 80

24126 TCS 80

24126-12 106

24126-4 144

24126-4XF 277

24126-4XS 205

24126-4XSS6 205

24128 SC 52

24128 SC NK 52

24128 SCGV NK 52

24128-12 106

2416P (GP) 154, 212

2416PSS4 154, 212

2416SP 155, 213

241610-SD 146

241610-SDLG 146

24166-1 67

24166-12 106

24166-4 144

24166-4XS 205

24166-4XSS6 205

24166-SD 146

24166-SDLG 146

24168 RTSC 57

24168 RTSC NK 57

24168-SD 146

24168-SDLG 146

24168-SDSS4 209

24168-SDSS6 210

24168-12 106

24168-4XA 206

24168-4XS 205

24168-4XSS6 205

2418 SCF 53

2418 TCF 80

2418 TCS 80

2418 WB 413

241810 RTSC 57

241810 RTSC NK 57

241810 SC 53

241810 SC NK 53

241810 SCGV NK 53

241812 SC 53

241812 SC NK 53

241812 SCGV NK 53

24184 SC NK 51

24184 SCGV 51

24184 TCF 80

24184 TCS 80

24186 HC 54

24186 HC NK 54

24186 RTC 81

24186 RTSC 57

24186 RTSC NK 57

24186 SC 52

24186 SC NK 52

24186 SCGV 52

24186 SCGV NK 52

24186 TCF 80

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

Index

483 B-Line series electrical enclosures Eaton

Index

24186 TCS 80

24186 WPSC 63

24188 RTHC 58

24188 RTHC NK 58

24188 RTSC 57

24188 RTSC NK 57

24188 SC 52

24188 SC NK 52

24188 SCGV NK 52

2420DF 155, 213

2420P (GP 154, 212

2420PSS4 154, 212

2420SP 155, 213

242010-1 67

242010-12 107

242010-4 144

242010-4XA 207

242010-4XS 205

242010-4XS3PT 218

242010-4XSS6 205

242010-4XSS63PT 218

242010-43PT 160

242010-SD 146

242010-SDLG 146

242010-SDW 146

242010-SDWLG 146

242012-1 67

242012-12 107

242012-SD 146

242012-SDLG 146

242012-SDSS4 209

242012-SDSS6 210

242012-SDW 146

242012-SDWLG 146

242016-12 107

242016-SD 148

24206 SC NK 52

24206 SCGV NK 52

24206-SD 146

24206-SDLG 146

24206-SDW 146

24206-1 67

24206-1PP 70

24206-12 106

24206-12TE 109

24206-4 144

24206-4XA 206

24206-4XS 205

24206-4XS3PT 218

24206-4XSS6 205

24206-4XSS63PT 218

24206-43PT 160

24207-12CHSC 101

24208-FM 151

24208RHC 74

24208 SC NK 52

24208 SCG 61

24208 SCGV NK 52

24208-SD 146

24208-SDLG 146

24208-SDSS4 209

24208-SDSS6 210

24208-SDW 146

24208-SDWSS4 209

24208-1 67

24208-12 106

24208-4 144

24208-4XA 206

24208-4XF 277

24208-4XS 205

24208-4XS3PT 218

24208-4XSS6 205

24208-4XSS63PT 218

24208-43PT 160

24209-12CHSC 101

2424DF 155, 213

2424P (GP) 154, 212

2424PSS4 154, 212

2424 SCF 53

2424 SCS 53

2424SF 157, 215

2424SP 155, 213

2424 TCF 80

2424 TCS 80

2424 WB 413

242410 RHC 74

242410 RTHC 58

242410 RTHC NK 58

242410 RTSC 57

242410 RTSC NK 57

242410 RTSCGV NK 57

242410 SC 53

242410 SC NK 53

242410 SCGV NK 53

242410-SD 146

242410-SDLG 146

242410-SDW 146

242410-SDWLG 146

242410-12 107

242410-4D3PT 162

242410-4XF 277

242410-RHCF 275

242411 RTCT 84

242412 RTSC 57

242412 RTSC NK 57

242412 RTSCGV NK 57

242412 SC 53

242412 SC NK 53

242412 SCG 61

242412 SCGV NK 53

242412-1 67

242412-12 107

242412-4XA 207

242412-4XF 277

242412-4XS 205

242412-4XSS6 205

242412-SCG 61

242412-SD 146

242412-SDLG 146

242412-SDSS4 209

Catalog Page

Number Number

Catalog Page

Number Number

Catalog Page

Number Number

484

Index

Eaton B-Line series electrical enclosures