电机型号Motormodel

RGWA3-50

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1. in the standard linearmotormodule operationprocess,the platform will be subjected to greaterimpact, so the installation platformneedstohave sufficient stiffness and stability. f the installation platform stiffnesif it is insufficient,the standard module will appear jitter and resonance during operation,which will affecthepositioning accuracy,repetitionaccuracyandequipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as posible,as well as the numberoflockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

that theinstallation tableisfreeofforeignbodies,burrsandotheritemsthatmayhindert

尺寸示意图

电机型号

RGWA1-75

安装要求

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 \dot{^{0}}.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1,in the standard linearmotormodule operation process,the platform willbe subjected to greaterimpactso theinstallationplatformneedstohave sufficient stiffness and stability.f the instllation plaform stiffnessf it is insufficient, the standard module will appear jiter and resonance during operation, which willaffect the positioning accuracy,repetition accuracy and equipment.

2. If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the number of lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be no1 lessthan0.02mm/500mm.

it the installation table is free of foreign bodies, burrs and other items that may hinder thei

尺寸示意图

电机型号
Motormodel
RGWA2-75

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1,in the standard linear motormodule operation process,the platform willbe subjected to greaterimpact,so theinstallation platform needsto have sufficient stiffness and stability If the installtion platform stiffnessf it is insufficient, the standardmodule willappear jiter and resonance during operation,which will affect thepositioning accuracy,repetition accuracyand equipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lockscrews.

3,the tabletop flatness of the installation platform is not less than 0.05mm/500mm,and the occasion with high accuracyrequirements needs tobe not lesthan0.02mm/500mm.

at the installation table is free of foreign bodies, burrs and other items that may hinder the

尺寸示意图

电机型号Motormodel

RGWA3-75

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 \dot{^{0}}.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.in the standard linearmotormodule operationprocess,the platform will be subjected to greaterimpact, so theinstallation platformneedstohave sufficientstiffnessandstability.f theinstallationplatformstiffnesslf it isinsufficientthestandardmodulewillappearjiterandresonance during operation,which will affect thepositioning accuracy,repetitionaccuracy and equipment.

2. If condlitions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm and the occasion with high accuracy requirements needs to be not less than 0.02mm/500mm.

4,cleanthe tableto ensure that theinstallation tableisfree of foreign bodies,burrs andotheritems thatmayhindertheinstallation.

尺寸示意图

电机型号Motormodel

RGWA1-100

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.inthe standardlinearmotormodule operation process,the platform willbe subjectedtogreaterimpactso theinstallation platformneedstohave sufficient stiffness and stability.f the installation platform stifnesslfit is insufficient,the standardmodule willappear jitter and resonance during operation, which willaffect the positioning accuracy, repetition accuracy and equipment.

2. If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the number of lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

尺寸示意图

电机型号Motormodel

RGW A2-100

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 *0.02\mathsf{mm}/500\mathsf{mm} ®
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.in thestandard linearmotormodule operationprocess,the platform will be subjected to greaterimpact,so theinstallation plaformneedstohave sufficient stiffnessandstability.If theinstallationplatformstiffnessfit isinsufficient,the standardmodule willappearjitterandresonance during operation, which willaffecthe positioning accuracy,repetition accuracy and equipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as wellas the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

4, clean the table to ensure that the installation table is free of foreign bodies, burrs and other items that may hinder the installation.

尺寸示意图

电机型号Motormodel

RGWA3-100

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 \dot{0}.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1,in the standard linearmotormodule operationprocess,the platform willbe subjected to greaterimpactso theinstallationplatformneedstohave sufficient stiffness and stability.f the instllation plaform stiffnessf it is insufficient, the standard module will appear jiter and resonance during operation,which will affect thepositioning accuracy,repetition accuracyandequipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as wellas the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

4, clean the table to ensure that the installation table is free of foreign bodies, burrs and other items that may hinder the installation.

尺寸示意图

电机型号Motormodel

RGWA1-125

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 *0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.in thestandard linearmotormodule operationprocess,the platform will be subjected to greaterimpact,so theinstallation plaformneedstohave sufficient stiffnessandstability.If theinstallationplatformstiffnessfit isinsufficient,the standardmodule willappearjitterandresonance during operation, which willaffecthe positioning accuracy,repetition accuracy and equipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as wellas the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

4, clean the table to ensure that the installation table is free of foreign bodies, burrs and other items that may hinder the installation.

尺寸示意图

Dimensional diagram

电机型号Motormodel

RGW A2-125

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.in the standard linearmotormoduleoperation processthe platform willbesubjected to greaterimpact,so the installation platformneedstohave sufficient stiffnessandstability.If theinstallationplatformstiffnesslf it isinsufficient,the standard modulewillappearjitterandresonance during operation,which willaffect thepositioning accuracy,repetition accuracyand equipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the number of lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

尺寸示意图

电机型号Motormodel

RGWA3-125

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1, in the standard linear motormodule operation process,the platform willbe subjected togreaterimpact,so the installation platform needstohave sufficient stiffness and stability If the instlltion platform stiffnessf it is insufficient, the standardmodule will appear jiter and resonance during operation,which will affect thepositioning accuracy,repetition accuracyand equipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible,as well as the numberof lock screws.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm and the occasion with high accuracy requirements needs to be not less than0.02mm/500mm.

4,cleanthe table to ensure that theinstallation tableisfree offoreignbodies,burrs and otheritemsthat mayhindertheinstallation.

尺寸示意图

电机型号Motormodel

RGWC1-60A-3S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 \dot{0}.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.in the standard linearmotormodule operation process,the platform willbe subjected to greaterimpact,so theinstallation platform needstohave sufficient stiffnessandstability.f theinstallation platformstiffnesslf it isinsufficientthe standard module willappearjitterandresonance during operation,which will affecthepositioning accuracy,repetitionaccuracyand equipment.

2. If condlitions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lock screws.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm and the occasion with high accuracy requirements needs to be not lessthan 0.02mm/500mm.

4, clean the table to ensure that the installation table is free of foreign bodies, burrs and other items that may hinder the installation.

尺寸示意图

Dimensional diagram

电机型号
Motormodel
RGWC2-60A-6S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 *0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1,in the standard linearmotormodule operation process,the platform will be subjected to greaterimpact,so the installationplatformneedstohave sufficient stiffness and stability. f the installation platform stiffnessif it is insufficient,the standard module will appear jiter and resonance during operation,which will affect the positioning accuracy,repetition accuracy and equipment.

2.If conditions permit,the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lockscrews.

3.the tabletop flatness of the installation platform is not less than 0.05mm/500mm,and the occasion with high accuracy requirements needsto be not lessthan0.02mm/500mm.

that the installation table is free of foreign bodies, burrs and other items that may hinder t

尺寸示意图

Dimensional diagram

电机型号Motor model

RGWC3-60A-12S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.in the standard linear motormodule operation process,the platform willbe subjected to greaterimpact,so theinstallation platform needsto have sufficient stiffness and stability. f the installation platform stiffnesfit is insufficient,the standardmodule willappear jitter and resonance during operation,which will affect thepositioning accuracy,repetition accuracyandequipment.

2. If condlitions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lock screws.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

that the installation table is free of foreign bodies, burrs and otheritems that may hinder th

尺寸示意图

电机型号Motormodel

RGWC1-75A-3S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1, in the standard linear motormodule operation process,the platform willbe subjected to greaterimpact,so the installation platform needsto have sufficient stiffness and stability. If the installtion platform stiffnessf it is insufficient, the standard module willappear jiter and resonance during operation,which willaffecthepositioning accuracy,repetition accuracy and equipment.

2. If condlitions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan 0.02\mathsf{mm}/500\mathsf{mm}

4, clean the table to ensure that the installation table is free of foreign bodies, burrs and other items that may hinder the installation.

尺寸示意图

电机型号
Motormodel
RGWC2-75A-6S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1,in the standard linearmotormodule operation process,the platform willbe subjected togreaterimpact,so theinstallation platform needs tohave sufficient stiffness and stability. If the installtion platform stiffnessf it is insufficient, the standard module willappear jiter and resonance during operation,which will affect thepositioning accuracy,repetition accuracyand equipment.

2. If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the number of lockscrews.

3,the tabletopflatness of theinstallation platform is notless than 0.05mm/500mm,and the occasionwith high accuracyrequirements needs tobe not lesthan0.02mm/500mm.

at the installation table is free of foreign bodies, burrs and other items that may hinder the

尺寸示意图

电机型号M+ar m

RGWC3-75A-12S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1, in the standard linearmotormodule operation process,the platform willbe subjected to greaterimpact,so theinstallation platform needs tohave sufficient stiffnessandstability.If theinstallationplatform stiffnesslf it isinsufficient,thestandard modulewillappearjitter andresonance during operation,which will affect thepositioning accuracy,repetition accuracyand equipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

at the installation table is free of foreign bodies, burrs and otheritems that may hinder thei

尺寸示意图

Dimensional diagram

电机型号Motormodel

RGWC1-100A-3S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.in the standard linearmotormodule operationprocess,the platform wilbe subjected to greater impactso theinstalltion platform needstohave sufficient stiffnessandstability.If theinstallationplatform stiffnesslf it isinsufficient,thestandardmodule willappearjitterandresonance during operation, which willaffect the positioning accuracy,.repetition accuracy and equipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

4, clean the table to ensure that the installation table is free of foreign bodies, burrs and other items that may hinder the installation.

尺寸示意图

Dimensional diagram

电机型号Motormodel

RGWC2-100A-6S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.in thestandard linearmotormodule operationprocessthe platformwillbe subjected to greatermpact so theinstallation plaformneedstohave sufficient stiffnessandstabilityf theinstallationplatform stiffnesslf it isinsufficientthestandardmodulewillappearjitterandresonance dring operation,which will affecthepositioning accuracy,repetitionaccuracyand equipment.

2. If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the number of lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

it theinstallation tableisfreeofforeignbodies,burrsand otheritemsthatmayhinderthei

尺寸示意图

电机型号Motormodel

RGWC3-100A-12N

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1, in the standard linear motor module operation process,the platform will be subjected to greaterimpact,so the installation platform needsto have sufficientstiffnessandstability.f theinstallationplatformstiffnesslf it isinsufficient,thestandardmodulewillappearjitterandresonance during operation,which willaffecthepositioning accuracy,repetitionaccuracyandequipment.

2. If condlitions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the number oflock screws.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

lat the installation table is free of foreign bodies, burrs and other items that may hinder the

尺寸示意图

Dimensional diagram

电机型号Motormodel

RGWC1-125A-3S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.inthe standard linearmotormodule operation process,the platform willbesubjectedtogreaterimpactso theinstallationplatformneedstohave sufficient stiffness and stability.If the installation platform stiffnesf it is insufficient,the standardmodule willappear jiter and resonance during operation,which willaffect thepositioning accuracy,repetition accuracyandequipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

4, clean the table to ensure that the installation table is free of foreign bodies, burrs and other items that may hinder the installation.

尺寸示意图

Dimensional diagram

电机型号Motormodel

RGWC2-125A-6S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 *0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.inthe standardlinearmotormoduleoperationprocessthe platformwillbe subjectedtogreaterimpact,so theinstallationplatformneedstohave sufficient stiffness and stability.f theinstallation platform stiffnesf it is insufficient, the standardmodule will appear jiter and resonance during operation,which willaffect thepositioning accuracy,repetitionaccuracyand equipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible,as well as the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

4, clean the table to ensure that the installation table is free of foreign bodies, burs and other items that may hinder the installation.

尺寸示意图

Dimensional diagram

电机型号Motormodel

RGWC3-125A-12N

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1, in the standard linear motormodule operation process,the platform willbe subjected togreaterimpact,so the installationplatform needstohave sufficient stiffess and stability If the instlltion platform stiffnessf it is insufficient, the standardmodule willappear jiter and resonance during operation,which will affect thepositioning accuracy,repetition accuracyand equipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

at the installation table is free of foreign bodies, burrs and other items that may hinder the

尺寸示意图

电机型号Motormodel

RGWC2-150A-6S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 *0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1. in the standard linearmotormodule operationprocess,the platform wil be subjected to greater impact, so theinstalltion platformneedstohave sufficient stiffness and stability If the instlltion platform stiffnessf it is insufficient, the standardmodule illappear jiter and resonance during operation,which will affect thepositioning accuracy,repetition accuracyand equipment.

2.If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

4, clean the table to ensure that the installation table is free of foreign bodies, burrs and other items that may hinder the installation.

尺寸示意图

Dimensional diagram

电机型号

RGWC3-150A-12N

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 *0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1.in the standardlinearmotormodule operationprocess,theplatform willbe subjected togreaterimpact,so theinstallationplatformneedstohave sufficient stiffnessandstability.If theinstallationplatformstiffnesslf it isinsufficient,thestandardmodulewillappearjitterandresonance during operation,which willaffecthe positioning accuracy,repetition accuracy and equipment.

2. If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberoflockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

that theinstallation tableisfree offoreignbodies,burrsand otheritemsthatmayhindert

尺寸示意图

电机型号Motormodel

RGWC2-180A-6S

安装要求

Installation requirements

1、在标准直线电机模组运行过程中，平台会受到较大的冲击力，因此安装平台需要具备足够的刚度与稳定性。若安装平台刚度
不足，则标准模组在运行过程中会出现抖动、共振等现象，从而产生对定位精度、重复精度以及设备的影响。
2、在条件允许的情况下，应尽可能多的增加模组底座与安装台面的接触面积，以及锁螺钉的数量。
3、安装平台的台面平整度不低于 0.05\mathsf{mm}/500\mathsf{mm} ，对于精度要求高的场合需不低于 0.02\mathsf{mm}/500\mathsf{mm}
4、清理台面，确保安装台面无异物、毛刺等可能妨碍安装的物品。

1. in thestandard linearmotormodule operationprocess,the platform willbe subjected to greater impactso theinstalltion platformneedstohave sufficient stiffnessandstability.If the installationplatformstiffnesslf it isinsufficient,thestandard modulewillappearjitter andresonance during operation,which willaffecthepositioning accuracy,repetition accuracyandequipment.

2. If conditions permit, the contact area between the module base and the installation table should be increased as much as possible, as well as the numberof lockscrews.

3, the tabletop flatness of the installation platform is not less than 0.05mm/500mm, and the occasion with high accuracy requirements needs to be not lessthan0.02mm/500mm.

尺寸示意图

Dimensional diagram